Machinist jobs in Cherry Hill, New JerseyCreate job alerts

Job Description Job Title: Corporate Maintenance Trainer Reports To: SVP of Maintenance and Facilities Job Type: Full-Time, Exempt Job Schedule: Monday-Friday, Hybrid - Travel required Reporting Location: Wall Township, NJ Salary: Based on experience. Job Summary: The Corporate Maintenance Trainer will provide expertise and direction for technical and maintenance support throughout the entire organization to improve technician knowledge, skills, and personal growth while ensuring compliance with vendors, OEM, OSHA/EPA, and company directives and processes. Duties/Responsibilities: • Develop and implement corporate wide vehicle maintenance training program curriculum., • Ensure all maintenance team members are properly trained on vehicles and components within the fleet including all necessary OE-provisioned troubleshooting software., • Coordinate all maintenance employee OSHA/EPA required training, • Coordinate all in-house and vendor-led training functions, • Maintain attendance records and training logs for all training in the Maintenance Department, • Develop and implement technician development plans for STA locations at technician level to ensure continuous improvement and progression to the next available skill level based on ASE certification programs., • Coordinate with all STA Maintenance managers to understand the developmental and training needs of all maintenance team members., • Monitor internal repair and vendor release repair bulletins and recalls updating training programs., • Works with STA locations to develop Apprenticeship programs., • Other tasks as assigned by Management Required Skills/Abilities-Essential Functions: • Ability to travel. Approximately 60% of the time will be spent traveling or on the road., • Ability to perform the essential functions of the job, • Ability to comply with all policies and procedures established by company, • Demonstrated technical skills related to School Bus, Motor Coach and Paratransit type buses., • Presentation skills that can engage the team in learning., • Ability to communicate with front line team members as well as corporate team members., • Ability to deliver exceptional service through positive engagement and patience., • Ability to work in a team environment to continuously improve results., • Must have good communication skills to be able to give directions., • Ability to promote a culture of trust and safety., • Must have a complete understanding of the design, vehicle electronics, and overhaul knowledge for transmissions and heavy-duty engines, as well as other components., • Must be able to work with diagnostic equipment including OEM type computerized programs such as INSITE, WTEC, Wabco., • Must have an in-depth understanding of regulations affecting mechanics and maintenance operations., • Must be autonomous and be self-directed., • Must be able to research and identify resources for complex issues., • Must have basic math abilities to analyze and track maintenance information., • Must have knowledge of the warranty process., • Must be able to prioritize and be detail oriented., • Ability to use various hand tools, various specialized hand tools, various power tools, various pneumatic tools, diagnostic tools such as schematics, Prolink and computer, heavy machinery, and machinist (precision) tools and vehicle lift systems., • Must be able to perform physical activities including working on top of coaches and lifting up to seventy-five (75) pounds., • While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is frequently exposed to heat/cold conditions., • Conduct oneself professionally and in a manner to reflect positively on STA. Experience: • Five (5) years of recent progressive heavy equipment maintenance experience required., • ASE Master Certification in one of S-series, T – series, and A- series, • Must be able to obtain and maintain a Commercial Driver’s License, Class B with Passenger Endorsement, • Additional training from mechanical/technical schools, courses or seminars is desirable., • High school diploma or GED The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. STA is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants; Returning military are strongly encouraged to apply. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. All applicants must be eligible to work in the US without restrictions.

Job DescriptionOverview: Holtec International is a global turnkey supplier of equipment and systems for nuclear, solar, geothermal, and fossil power generation sectors of the energy industry. Holtec is designing grid-scale energy systems to revolutionize the power industry. We are seeking a Mechanical Components Estimator with an engineering or fabrication background. A successful candidate will perform development of accurate and detailed cost estimates for the mechanical components of Holtec’s power plant technologies, including its flagship SMR-300TM Small Modular Reactor (SMR), Holtec’s Concentrated Solar Power Plant (CSP), and Green Boiler TM molten salt energy storage system. This estimator will be responsible for producing bottoms-up estimates, engaging with supply chains, and reviewing subcontractor cost estimates. Candidates should be able to collaborate across engineering, procurement, and factory fabrication teams to ensure cost predictability and feasibility. The role requires strong expertise in fabrication applications, including sequencing of subassemblies, welding processes, machining, and logistics. Candidates will work closely with staff from Holtec’s state-of-the-art manufacturing facilities to develop estimating methods, productivity data, and component estimates. Key Responsibilities: • Cost & Schedule Estimating:, • Develop detailed cost estimates for the fabrication power plant components., • Evaluate material take-offs, supplier/vendor quotations, and subcontractor inputs, ensuring a comprehensive understanding of the scope of work and project requirements., • Review and incorporate historical data from estimates, cost data, indices, subcontracts, and other data to inform unit rates., • Work closely with engineering and fabrication staff for a well-understood fabrication plan for mechanical components and to inform process and equipment needs., • Organize and maintain a structured approach to managing cost data. Maintain comprehensive documentation for estimate assumptions, methodologies, and data sources, consistent with industry best practices., • Data Analysis & Benchmarking:, • Work with fabrication teams to develop estimate input data, including production rates of skilled labor categories, inspections and tests, and machines., • Conduct market research to gather cost benchmarks and trends., • Evaluate major assumptions, risks, and uncertainties associated with estimates. Perform risk analysis, contingency planning, and sensitivity analysis to identify cost drivers and potential overruns., • Consolidate cost estimates into comprehensive financial models that support project budgeting, decision-making, and forecasting., • Project Stakeholder Collaboration:, • Review and validate cost estimates provided by subcontractors, ensuring that all portions of work are accounted for and aligned with project specifications., • Work closely with engineering, procurement, construction, and project management teams to collect input and ensure alignment on scope., • Bachelor’s degree in Mechanical Engineering, Weld Engineering, Industrial Engineering, or a related field. Equivalent work experience may be considered., • Minimum of 5 years of experience in fabrication, application engineering, or similar roles., • Knowledge of industry best practices and standards for cost estimation methodologies., • Proficiency in estimating software, including Excel., • Strong attention to detail with excellent analytical skills and problem-solving capabilities., • Ability to communicate complex cost data clearly to project stakeholders., • Ability to communicate with fabrication staff to develop estimate data., • Professional certifications such as Certified Estimator (CE), Project Management Professional (PMP), or other related certifications are highly desirable., • Familiarity with welding processes and non-destructive examination techniques., • Familiarity with the ASME Boiler & Pressure Vessel Code. kqjgogXEsT

Job DescriptionLooking for a new opportunity? Don’t miss out on this role! Doherty Staffing Solutions is currently partnering with a leading supplier in the manufacturing industry located in Philadelphia, PA. We are seeking candidates for a CNC Machinist Programmer role. Hours are 6am-4:30pm Monday- Thursday and compensation for this direct hire opportunity is $75,000 annually. Interested? What a CNC Programmer will do: • Interpret technical drawings, blueprints, and schematics to machine custom and production components, including tools and fixtures, • Accurately calculate dimensions and tolerances; perform layout and measurement of workpieces, • Program, set up, and operate both manual and CNC machines for prototype and production runs, • Collaborate with engineers, programmers, and production staff to improve machining methods and results, • Inspect completed parts using precision instruments such as calipers, micrometers, and CMMs to ensure adherence to specifications, • Adjust tooling and machine settings as necessary to meet complex design requirements and tight tolerances, • High school diploma or equivalent required, • Completion of a technical program or apprenticeship in CNC machining preferred, • 5+ years of experience in both manual and CNC machining environments, • Strong knowledge of machining practices, cutting tools, and working with various metals and plastics, • Ability to read and interpret complex engineering drawings and technical documentation., • CNC programming and knowledgeable in G-code, • Experience with CAD/CAM software systems, • High attention to detail with a commitment to producing precise, high-quality work, • Strong mechanical aptitude and problem-solving skills, • #CareerChangeByDoherty Don’t miss out on this role… Apply now! Click APPLY NOW to complete our mobile-friendly, online application. For questions or further information about the CNC Programmer position, please call/text 952-818-3275 or email . This company offers a comprehensive employee benefits package, including medical, dental, and vision insurance, a 401(k) with company match, health savings and spending accounts, life and disability insurance, wellness programs, paid parental leave, tuition assistance, PTO, and company product discounts.Company DescriptionFor over 40 years, Doherty has offered customized workforce solutions and talent acquisition services to companies doing business throughout the Midwest.For over 40 years, Doherty has offered customized workforce solutions and talent acquisition services to companies doing business throughout the Midwest.

Job DescriptionDIRECT HIRE: A fantastic opportunity for a highly skilled HAAS CNC Machinist to join a dynamic team. In this critical role, you will leverage your extensive experience in machining to oversee the setup, operation and quality of parts utilizing CNC machines. You will be instrumental in producing high-precision components that meet stringent quality standards while contributing to continuous improvement initiatives. Salary Range: $75K - $95K Location: Job Shop position Benefits: Health, dental, life insurance, PTO, holidays Role & Responsibilities: • Set up and operate CNC machines, lathes, mills and other machining equipment to fabricate high quality components according to engineering specifications, • Utilize advanced measuring instruments such as calipers, micrometers and gauges to verify dimensions and tolerances of finished products, • Develop and optimize machining processes, including tooling selection and fixture design to enhance efficiency and precision, • Maintain accurate documentation of production activities, including work orders and quality control recordsRequired Qualifications:, • 5+ years of experience in machining, with a strong background in CNC programming and operation, • Proficient in reading and interpreting engineering drawings and blueprints, • Strong understanding of machining processes, materials and quality control methodologies, • Ability to work independently and collaboratively in a fast-paced, team-oriented environmentPreferred Qualifications:, • Experience with Mastercam software for program development, • Familiarity with HAAS machinesTechnical Skills& Relevant Technologies:, • Expertise in CNC machining, programming languages (e.g. G-code) and setup, • Proficient in the use of precision measurement tools and quality inspection techniques, • Knowledge of materials and tooling specific to machining operationsSoft Skills & Cultural Fit:, • Excellent problem-solving skills with a keen attention to detail and precision, • Strong communication and interpersonal skills for effective collaboration with team members, • Ability to adapt to changing priorities and demonstrate a proactive approach to work, • Commitment to safety and quality in all aspects of machining operationsOnce you apply, please text "CNC" to 904-712-6140. INDH Powered by JazzHR ZGKC9hDklI

Job Description This position is lcoated in Winnemucca, NV Position Overview: We seek a skilled and reliable Machinist to join our job shop team. As a Machinist, you will be responsible for operating and maintaining CNC machines, lathes, milling machines, grinders, and other machinery to produce precision parts according to customer specifications and engineering drawings. The ideal candidate will have a strong attention to detail, excellent problem-solving skills, and the ability to work efficiently in a fast-paced manufacturing environment. A relocation package is available for those with the knowledge and experience to work immediately. Key Responsibilities: * Set up and operated CNC and manual machines (lathes, mills, grinders, etc.). * Read and interpreted blueprints, technical drawings, and work orders. * Measure and inspect parts for accuracy and conformance to specifications using various measuring instruments (calipers, micrometers, height gauges, etc.). * Ensure the safe operation of machinery and adhere to safety protocols and regulations. * Maintain machines by performing routine maintenance and troubleshooting. * Communicate with engineers and supervisors to understand project requirements. * Follow quality control standards and make adjustments as necessary to meet tolerances. * Maintain an organized and clean work area. * Work with minimal supervision and collaborate with team members to meet production deadlines. * Perform other related duties as assigned. * Small Shop environment with a variety of work and immense. We have very few repetitive processes. Qualifications: * Set up and operate CNC and manual machines (lathes, mills, grinders, etc.). * Read and interpret blueprints, technical drawings, and work orders. * Measure and inspect parts for accuracy and conformance to specifications using various measuring instruments (calipers, micrometers, height gauges, etc.). * Ensure the safe operation of machinery and adhere to safety protocols and regulations. * Maintain machines by performing routine maintenance and troubleshooting. * Communicate with engineers and supervisors to understand project requirements. * Follow quality control standards and make adjustments as necessary to meet tolerances. * Maintain an organized and clean work area. * Work with minimal supervision and collaborate with team members to meet production deadlines. * Perform other related duties as assigned. * Small Shop environment with a variety of work and immense. We have very few repetitive processes. * High school diploma or equivalent. Technical degree or certification in machining preferred. * Proven experience as a Machinist in a job shop or similar manufacturing environment. * Strong knowledge of machining processes, including CNC programming and setup. * Ability to read and interpret engineering drawings, blueprints, and work instructions. * Proficient in the use of precision measuring tools (micrometers, calipers, etc.). * Familiarity with metalworking and machining materials. * Strong attention to detail, problem-solving skills, and ability to work under pressure. * Ability to work independently and as part of a team. * Excellent communication skills. Physical Requirements: • Set up and operate CNC and manual machines (lathes, mills, grinders, etc.). Read and interpret blueprints, technical drawings, and work orders. * Measure and inspect parts for accuracy and conformance to specifications using various measuring instruments (calipers, micrometers, height gauges, etc.). * Ensure the safe operation of machinery and adhere to safety protocols and regulations. * Maintain machines by performing routine maintenance and troubleshooting. * Communicate with engineers and supervisors to understand project requirements. * Follow quality control standards and make adjustments as necessary to meet tolerances. * Maintain an organized and clean work area. * Work with minimal supervision and collaborate with team members to meet production deadlines. * Perform other related duties as assigned. * Small Shop environment with a variety of work and immense. We have very few repetitive processes. * High school diploma or equivalent. Technical degree or certification in machining preferred. * Proven experience as a Machinist in a job shop or similar manufacturing environment. * Strong knowledge of machining processes, including CNC programming and setup. * Ability to read and interpret engineering drawings, blueprints, and work instructions. * Proficient in the use of precision measuring tools (micrometers, calipers, etc.). * Familiarity with metalworking and machining materials. * Strong attention to detail, problem-solving skills, and ability to work under pressure. * Ability to work independently and as part of a team. * Excellent communication skills. * Ability to lift up to 50 lbs. * Ability to stand for extended periods and work in a manufacturing environment. Company DescriptionSource Too Machine, Inc. is a small manufacturing company in Winnemucca, Nevada. We repair and manufacture a variety of industrial and agricultural items. We use CNC and manual machines to provide the best service to our AG, Mining, Ranchers, and the community. The work is always changing and challenging.Source Too Machine, Inc. is a small manufacturing company in Winnemucca, Nevada. We repair and manufacture a variety of industrial and agricultural items. We use CNC and manual machines to provide the best service to our AG, Mining, Ranchers, and the community. The work is always changing and challenging.

Job Description MACHINIST: CNC MILL (VMC) COMPANY PROFILE: Fluidyne Corp is a well respected prime contractor that manufactures custom valves for the Navy. The majority of our business supports the Navy’s critical Nuclear Propulsion and Level I/Subsafe programs. Consequently, the quality of our product is vital to our success. Our facility is clean, well lit, and fully air conditioned. WORK HOURS: The position requires a 40 hour minimum work week, with 8 hours overtime always available. Our lunch period is 30 minutes. We do not work on weekends. COMPENSATION PACKAGE: We offer a competitive compensation package commensurate with talent and experience. This package includes company paid health insurance (employees are required to pay a portion of the cost for dependents) and a 401(k) Plan that includes a no limit 35% employer match. EXPERIENCE REQUIREMENTS: CNC mill machinist applicants must have at least 3 years experience with the programming, set-up and machining of precision milled parts including castings and forgings. Machinists that are proficient with both CNC and manual equipment are preferred. JOB RESPONSIBILITIES AND REQUIREMENTS: Must be able to produce parts per drawing requirements with minimal supervision. JOB DESCRIPTION AND DETAILS: This position is for the programing, set up, fixturing and operation of an Okuma vertical machining center with a 60” X 25” table and A axis (rotary table). FeatureCAM is utilized for programing. Training for both FeatureCAM and the Okuma control will be available as long as the candidate has experience with similar software/control. Most parts are close tolerance and run quantities are very low. This is not a production shop. Fluidyne has an experienced staff that can provide guidance as necassary If you wish to pursue this job opportunity, please forward your resume, with salary requirements (if applicable). Please note, employers cited on resumes will not be contacted without your consent. Potential candidates must be agreeable to a background check. Company DescriptionDOD Contractor specializing in manufacturing custom valvesDOD Contractor specializing in manufacturing custom valves

Job Description Position Summary Delva Tool (DTM) is seeking a CNC Machinist for our Cinnaminson, NJ location. The CNC Machinist is responsible for quality parts produced on CNC machines such as, but not limited to, lathes and mills. If you are looking for an organization and career that will match your strong work ethic and passion for success, Delva Tool is a great place to start! Essential Duties and Responsibilities • Load parts and/or material, prove programs, operate controls, perform simple edits after approval of engineer and inspect quality of parts for conformance to requirements., • Study and interpret drawings, specifications of sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations and setup requirements., • Detect equipment malfunctions or out of tolerance machining and adjust machine (within capabilities) and controls as required to ensure quality of production., • Effectively communicate with supervisor, engineers, production control, quality and other shop personnel for assignment and to resolve machining or quality issues., • High school diploma or GED., • 1+ years related experience and/or training or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write routing reports and correspondence., • Ability to apply concepts of basic algebra and geometry., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Ability to read precision gauges and visual accuracy. Our comprehensive benefits package includes, but is not limited to, a competitive pay rate, accrued vacation time, sick time, paid holidays, 401(k) with company match, health, dental, and vision insurance as well as Short-Term Disability, Long-Term Disability, and life/AD&D insurance. We are a drug-free workplace / Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual experience and qualifications, without regard to a person's sexual orientation, gender identity, gender expression, religion, disability, race, creed, color, sex, age, national origin or ancestry, or any other status protected by the laws or regulations in the locations where we operate. Powered by JazzHR IbS4w9vJbU

Job DescriptionDIRECT HIRE: A fantastic opportunity for a highly skilled Senior HAAS CNC Machinist to join a dynamic team. In this critical role, you will leverage your extensive experience in machining to oversee the setup, operation and quality of parts utilizing CNC machines. You will be instrumental in producing high-precision components that meet stringent quality standards while contributing to continuous improvement initiatives. Salary Range: $95K - $115K Location: Job Shop position Benefits: Health, dental, life insurance, PTO, holidays Role & Responsibilities: • Set up and operate CNC machines, lathes, mills and other machining equipment to fabricate high quality components according to engineering specifications, • Utilize advanced measuring instruments such as calipers, micrometers and gauges to verify dimensions and tolerances of finished products, • Develop and optimize machining processes, including tooling selection and fixture design to enhance efficiency and precision, • Maintain accurate documentation of production activities, including work orders and quality control recordsRequired Qualifications:, • 10+ years of experience in machining, with a strong background in CNC programming and operation, • Proficient in reading and interpreting engineering drawings and blueprints, • Strong understanding of machining processes, materials and quality control methodologies, • Ability to work independently and collaboratively in a fast-paced, team-oriented environmentPreferred Qualifications:, • Experience with Mastercam software for program development, • Familiarity with HAAS machinesTechnical Skills& Relevant Technologies:, • Expertise in CNC machining, programming languages (e.g. G-code) and setup, • Proficient in the use of precision measurement tools and quality inspection techniques, • Knowledge of materials and tooling specific to machining operationsSoft Skills & Cultural Fit:, • Excellent problem-solving skills with a keen attention to detail and precision, • Strong communication and interpersonal skills for effective collaboration with team members, • Ability to adapt to changing priorities and demonstrate a proactive approach to work, • Commitment to safety and quality in all aspects of machining operationsOnce you apply, please text "SCNC" to 904-712-6140. INDH Powered by JazzHR i7QI0ADD4K

Job DescriptionOur established Client is looking for a CNC Lathe Machinist for our climate-controlled job shop in Pennsauken, NJ. This position is for a full-time, 1st shift worker with experience in CNC Programming, Set Up, and Operation. Knowledge of manual or other manufacturing equipment is a plus. The candidate must be organized, dependable, and mechanically skilled for this position. Fluent knowledge of CNC Programming using CAM software is essential to be considered for this position. Key Responsibilities • Responsible for programming and assisting operators with set-up and operation., • Inspect finished product and verify it’s dimensionally correct using a micrometer, caliper or other measuring equipment, • Study and interpret drawings, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations and set-up requirements, • Work as a team member meeting a professional standard of cooperation, communication and appearance, • Follow written and verbal procedures for machining and other duties, • Maintain regular attendance and perform duties in a timely manner, • Other responsibilities as assignedPreferred Qualifications, • Experience with multi-axis CNC machines., • Familiarity with CAD/CAM software., • Ability to stand, walk, and lift up to 50 pounds throughout the shift., • Occasional bending, kneeling, and climbing may be required., • $25 – 35 Per Hour, • Pension plan / 401 K, • Life Insurance, • 2 weeks PTO + sick leave, • End of year bonus, • Heath insurance, • Vision plan#ZR

Job Description Position Summary Delva Tool (DTM) is seeking a CNC Machinist for our Cinnaminson, NJ location. The CNC Machinist is responsible for quality parts produced on CNC machines such as, but not limited to, lathes and mills. If you are looking for an organization and career that will match your strong work ethic and passion for success, Delva Tool is a great place to start! Essential Duties and Responsibilities • Load parts and/or material, prove programs, operate controls, perform simple edits after approval of engineer and inspect quality of parts for conformance to requirements., • Study and interpret drawings, specifications of sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations and setup requirements., • Detect equipment malfunctions or out of tolerance machining and adjust machine (within capabilities) and controls as required to ensure quality of production., • Effectively communicate with supervisor, engineers, production control, quality and other shop personnel for assignment and to resolve machining or quality issues., • High school diploma or GED., • 1+ years related experience and/or training or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write routing reports and correspondence., • Ability to apply concepts of basic algebra and geometry., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Ability to read precision gauges and visual accuracy. Our comprehensive benefits package includes, but is not limited to, a competitive pay rate, accrued vacation time, 10 paid holidays, 401(k) retirement plan with a 4% company match (100% vested on day one), medical, dental, and vision insurance, as well as Short-Term Disability, Long-Term Disability, Life/AD&D insurance, and more! We are a drug-free workplace / Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual experience and qualifications, without regard to a person's sexual orientation, gender identity, gender expression, religion, disability, race, creed, color, sex, age, national origin or ancestry, or any other status protected by the laws or regulations in the locations where we operate. Powered by JazzHR Qcm5ssMU01

Job Description CNC/ Lathe Machinist Privately held Manufacturing Company. Mt. Laurel, NJ (On-Site) Bright Lights USA Inc. dba BLUSA Defense Manufacturing (blusadefense.com) is a small business manufacturer of mechanical and electro-mechanical components for the defense industry based in Mt. Laurel, NJ. We are an approved manufacturer for the US Government. We are ITAR registered/EAR & DFARS compliant. Our quality management system is certified to AS 9100:2016 and ISO 9001:2015. Our facility has a complete machine shop with CNC Milling, CNC Turning, Wire EDM and 3D printing. We offer a full range of manufacturing options-- from small to large quantities, and from the simple to complex--all at reasonable prices. We can even perform reverse engineering for hard-to-find items. Job Summary: Set up and run CNC Lathes Essential Duties: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily: • Safely and competently setup and operate CNC lathes with minimal supervision and technical guidance., • Perform part inspections as necessary to ensure quality of work and continually monitor parts production to ensure adherence to blueprint tolerances using appropriate inspection tools and criteria., • Deburr parts after machining operation to meet required specifications., • Maintain equipment and work areas in a clean, safe, and orderly fashion and perform basic preventative maintenance activities as required., • Maintain correct daily labor time recording and AS9100-related quality documents., • High school diploma, G.E.D. or equivalent is preferred., • 3-5+ years’ CNC Lathe experience., • Possess a working knowledge of typical shop inspection equipment such as micrometers, Vernier calipers, dial indicators, bore gages, CMM’s, and be proficient with all inspection methodologies., • Must be capable of standing for extended periods of time., • Must be able to lift up to 50 lbs. on occasion., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Position Overview As a CNC Milling Machinist, you will program, set up, and operate CNC milling machines to produce precision plastic components.Your expertise will ensure the highest quality standards while meeting production deadlines.Key Responsibilities: Program, set up, and operate CNC milling

Aerotek - JobID: JP-005558214 [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment.

Job DescriptionJob Title: Mechanical Assembler Location: Cinnaminson, NJ Compensation: $21.00/hr - $26.00/hr depending on experience Description: EENSER Corporation, a 78 year old engineering company, is seeking to hire a mid-level Machinist/Mechanical Assembler to work within the Mechanical Department in our Cinnaminson, NJ office. Typical responsibilities for the machinist is operate a wide variety of machine tools and also create set ups on grinders, lathes, and other complex machinery. We are looking for someone who is strong, precise, knows how to read plans, and pays close attention to details. Also, assembly of fixtures, tooling, and mechanical machines/devices. This job entails a fast-paced work environment, dealing with Tooling and Fixture design, BTH Lifting devices, Custom Automation and Assembly Tooling, etc. Responsibilities: • Reviews drawings, instructions, blueprints or samples to ensure accurate production., • Takes precise measurements for cutting or shaping., • Plans proper sequence of tasks to complete the assignment., • Checks output for quality assurance and documents or discards defects., • Maintains a safe and clean workstation., • Ability to assemble fixtures, tooling, and mechanical machines/devices, • Ability to take direction from project managers, • Plant site visits with customers and field measure of equipment, • Ability to work with fabricators, • Excellent communication skills, interpersonal skills and ability to interact with our valued team members and clients. Requirements:, • Excellent coordination and mechanical skills, • Strong attention to detail, accuracy, and safety, • Solid written and verbal communication skills, • Proficient in math, • Basic computer skills, • Ability to lift up to 50 pounds and perform repetitive task Experience:, • High school degree or equivalent, • Experience working with machine tools or mechanical assembly, • Working knowledge of safety protocols, • Apprenticeship or vocational training preferred, • 3-5 yrs. minimum experience

Job DescriptionDescription: Lead. Deliver. Transform. Are you ready to take charge of high-impact industrial projects and be the driving force behind their success? At IPM, we’re looking for a Site Project Manager II who thrives in fast-paced environments, leads with confidence, and ensures excellence from kickoff to completion. As the go-to leader on-site, you’ll be the face of IPM to our clients and the anchor of our internal teams. You’ll oversee complex field machining projects, ensuring they’re executed with precision, safety, and efficiency. From planning and mobilization to execution and teardown, you’ll own every phase of the project lifecycle. This is more than a management role—it’s an opportunity to shape outcomes, build relationships, and elevate performance. Requirements: What You’ll Do: Project Leadership & Execution • Own the full scope of site project delivery—schedule, safety, quality, and performance., • Serve as the single point of contact for clients and internal teams., • Lead on-site operations, guiding shift leads and technicians through every step., • Manage change orders, scope adjustments, and resource allocation with agility., • Identify and implement process improvements that boost efficiency and reduce costs., • Facilitate clear, proactive communication between clients and IPM departments., • Support quoting and estimating efforts for new work and change orders., • Train and coach field machinists on best practices and equipment usage., • Troubleshoot challenges and solve problems with a hands-on, solutions-first mindset., • 7–10 years of hands-on experience in field machining or related industries., • Proven leadership in managing complex, multi-phase projects., • Strong mechanical aptitude and critical thinking skills., • Proficiency in Microsoft Office and project management tools., • Ability to read technical documents and communicate professionally., • IPM Level III Field Machinist status., • Journeyman certification or 2-year technical degree. While performing the duties of this role, you’ll need to: • Frequently talk and listen, • Frequently sit, stand, walk, and use hands to handle tools and equipment, • Frequently climb ladders and stairs, • Frequently stoop, kneel, bend, or crouch, • Frequently lift and move items up to 50 lbs., • Frequently operate portable hand power tools (e.g., angle grinder, drill, power hammer), • Undergo respirator fit testing and usage as needed You’ll work in dynamic environments that may include: • Forklift traffic, overhead cranes, machining, welding, and airborne particles, • Moderate noise levels and moving mechanical parts, • Indoor shop settings and customer sites (both indoor and outdoor), • Willingness to obtain OSHA 10 or OSHA 30 certification, • Ability to gain clearance for nuclear power facilities, • Valid driver’s license (required), • Completion of IPM Overhead Crane and Forklift Training (required), • Willingness to travel up to 60% At IPM, we don’t just manage projects—we build legacies. You’ll be part of a team that values innovation, safety, and craftsmanship. Every day brings new challenges, new opportunities, and the chance to make a real impact. Ready to lead the charge? Apply now and bring your expertise to the forefront of industrial excellence.

Job Description Lead. Deliver. Transform. Are you ready to take charge of high-impact industrial projects and be the driving force behind their success? At IPM, we’re looking for a Site Project Manager II who thrives in fast-paced environments, leads with confidence, and ensures excellence from kickoff to completion. As the go-to leader on-site, you’ll be the face of IPM to our clients and the anchor of our internal teams. You’ll oversee complex field machining projects, ensuring they’re executed with precision, safety, and efficiency. From planning and mobilization to execution and teardown, you’ll own every phase of the project lifecycle. This is more than a management role—it’s an opportunity to shape outcomes, build relationships, and elevate performance. Requirements What You’ll Do: Project Leadership & Execution • Own the full scope of site project delivery—schedule, safety, quality, and performance., • Serve as the single point of contact for clients and internal teams., • Lead on-site operations, guiding shift leads and technicians through every step., • Manage change orders, scope adjustments, and resource allocation with agility., • Identify and implement process improvements that boost efficiency and reduce costs., • Facilitate clear, proactive communication between clients and IPM departments., • Support quoting and estimating efforts for new work and change orders., • Train and coach field machinists on best practices and equipment usage., • Troubleshoot challenges and solve problems with a hands-on, solutions-first mindset., • 7–10 years of hands-on experience in field machining or related industries., • Proven leadership in managing complex, multi-phase projects., • Strong mechanical aptitude and critical thinking skills., • Proficiency in Microsoft Office and project management tools., • Ability to read technical documents and communicate professionally., • IPM Level III Field Machinist status., • Journeyman certification or 2-year technical degree. While performing the duties of this role, you’ll need to: • Frequently talk and listen, • Frequently sit, stand, walk, and use hands to handle tools and equipment, • Frequently climb ladders and stairs, • Frequently stoop, kneel, bend, or crouch, • Frequently lift and move items up to 50 lbs., • Frequently operate portable hand power tools (e.g., angle grinder, drill, power hammer), • Undergo respirator fit testing and usage as needed You’ll work in dynamic environments that may include: • Forklift traffic, overhead cranes, machining, welding, and airborne particles, • Moderate noise levels and moving mechanical parts, • Indoor shop settings and customer sites (both indoor and outdoor), • Willingness to obtain OSHA 10 or OSHA 30 certification, • Ability to gain clearance for nuclear power facilities, • Valid driver’s license (required), • Completion of IPM Overhead Crane and Forklift Training (required), • Willingness to travel up to 60% At IPM, we don’t just manage projects—we build legacies. You’ll be part of a team that values innovation, safety, and craftsmanship. Every day brings new challenges, new opportunities, and the chance to make a real impact. Ready to lead the charge? Apply now and bring your expertise to the forefront of industrial excellence. Company Description

Manpower - JobID: 5757545 [Production Operator / Machinist] As a Machinist at Manpower, you'll: Operate CNC machines to produce precision parts; Inspect finished products to ensure quality standards are met; Maintain equipment by performing regular maintenance and repairs; Collaborate with engineers

Aerotek - JobID: JP-005576907 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Aerotek, you'll: Be responsible for loading, unloading, moving, and stocking; Perform staging of products and materials; Use a forklift, clamp truck, or other power equipment.

JobID: R15610 [Assembly Line Worker / Production Worker] As an Assembler at UFP Industries, you'll: Fabricate component parts or assemble the finished product according to the customer specifications; Secure and maintain correct component parts and supplies required for the operation; Fit parts toge

Gardian Holdings, LLC is a leading manufacturer of patented cargo securement technologies used in over the road, rail and ocean shipping.Gardian Holdings, LLC has a long history of market leading innovations in this space and is growing rapidly with its two primary products, Ty-Gard and Shock-Gard.W

Aerotek - JobID: JP-005571067 [Production Operator / Assembly Line Worker] As a Production Operator at Aerotek, you'll: Be responsible for pulling the order form to determine the required product for production; Pull the product from the warehouse and deliver it to the production floor; Perform wrap

ABF Freight - JobID: 26464 [Warehouse Associate / Forklift Operator] As a Forklift Operator at ABF Freight, you'll: Pick up and deliver cargo to and from various destinations usually within proximity of the consolidation/distribution center; Perform loading and unloading of trailers utilizing the sa

Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations per engineering direction.Reads and comprehends construction drawings and specifications.Lays out and installs piping, equipment, and other mecha

JLL empowers you to shape a brighter way.Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients.We are committed to hiring the best, most talented people and empowering them to thr

Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair all machinery.Assess welded surfaces, str

Gardian Holdings, LLC is a leading manufacturer of patented cargo securement technologies used in over the road, rail and ocean shipping.Gardian Holdings, LLC has a long history of market leading innovations in this space and is growing rapidly with its two primary products, Ty-Gard and Shock-Gard.W

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse.You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely r

As a Warehouse Material Handler, you will be responsible for assisting with warehouse operations and ensuring smooth logistics, including: organize inventory and ensure items are stored properly.Finance to provide billing and documentation in a timely manner.Duties and responsibilities can change de

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse.You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely r

As a Forklift Operator, you will be responsible for operating forklifts and supporting warehouse tasks, including: operate forklifts and other warehouse equipment safely.Duties and responsibilities can change depending on business needs.

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse.You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely r

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse.You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely r

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse.You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely r

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse.You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely r

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse.You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely r