Machinist jobs in Chesapeake, VirginiaCreate job alerts

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Repair, modify or overhaul various types of equipment or systems. Set up and operate portable machining tools or equipment. Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. ESSENTIAL: • Requires no supervision/oversight, has experience in the trade qualifications, and can perform all work required as an Outside Machinist and will provide mentoring to junior craftsman., • Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade as well as the ability to use most precision measuring instruments such as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators and posses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment., • Additional duties as assigned. REQUIRED: • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard., • Must have the ability to obtain government base access., • Knowledge and practical skills tests required., • NAVSEA Hatch Inspector, Electroplating, Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification., • Must be able to obtain a Secret/Confidential security clearance., • Must be a U.S. citizen who is not a dual citizen of any other country. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/OUTDOORS which is characterized as follows: • Primarily outdoors during the day and occasionally at night., • Frequently working on or near moving equipment and vibrating equipment., • Humidity is frequently above 90%., • Noise is over 85 decibels., • Light is intense/glare., • Occasional exposure to open fire/flames/sparks., • Frequent exposure to airborne dust, fumes, and gases., • Work surface is stable., • Constant exposure to dust., • Includes exposure to contaminants., • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds., • Work in confined spaces, kneel, jump, run, and work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Wear PPE for skin protection., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects., • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection for body, vision, and hearing protection. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking a highly skilled Inside Machinist with CNC programming, setup, and machining expertise to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires mastery of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. CNC PROGRAMMING & SETUP: • Review, edit, and optimize CNC programs (lathe and mill) using G-code and CAM platforms., • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines., • Perform the setup and operation of a wide range of equipment including lathes, mills, grinders, saws, and related shop machinery., • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys., • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes., • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents., • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment., • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances., • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes., • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements., • Support continuous improvement in tooling, fixturing, machining methods, and program efficiency. REQUIRED: • High School Diploma/GED., • Minimum five (5) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment., • Demonstrated proficiency in programming, reviewing, or editing CNC programs (lathe and mill)., • Ability to perform advanced setups, optimize tool paths, and improve setup instruction sheets., • Ability to operate both CNC and manual machine tools without supervision or guidance., • Ability to perform multi-axis machining operations (e.g., 4-axis or 5-axis mills) as applicable., • Able to read and interpret advanced blueprints, drawings, GD&T, and technical specifications without supervision or guidance., • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.)., • Ability to perform First Article Inspections and resolve dimensional issues to meet and exceed quality standards., • Demonstrated knowledge and proficiency in machining practices for tight-tolerance, critical components., • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements., • Ability to work independently from minimal instructions and drive work through completion., • Experience with exotic alloys and challenging machining conditions., • Familiarity with NAVSEA or military specifications., • CAM software experience (Mastercam, SolidWorks, etc.)., • Demonstrates high attention to detail and quality craftsmanship., • Strong communication skills with a collaborative mindset., • Ability to collaborate effectively with individuals in other departments, such as Quality or Engineering., • Adaptable and resourceful - able to plan work and think critically in a one-off production environment., • Willingness and ability to train less experienced Inside Machinists to support a culture of continued learning and growth., • Prioritizes and models safety culture and assists in reviewing cleanliness of work area. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: • Primarily indoors during the day and occasionally at night., • May require working on or near moving equipment and vibrating equipment., • May be exposed to intense light from welding operations., • Occasional exposure to open fire/flames/sparks from welding and grinding operations., • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds., • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects., • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection as required for the conditions., • Be able to recognize and react to alarms. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) in Chesapeake, VA is seeking a highly skilled Inside Machinist Supervisor to oversee the daily operations of our machine shop. We are a precision manufacturing company specializing in medium-sized, complex, and mission-critical components. Our work is non-repetitive, high-tolerance, and often governed by stringent technical and quality standards. This role requires a hands-on leader with deep technical expertise, strong organizational skills, and the ability to manage a dynamic, high-stakes environment. This role may require overtime. • Supervise and coordinate daily production assignments, ensuring machinists are properly guided and supported in executing complex, non-repeatable machining tasks., • Lead the creation, editing, and optimization of CNC programs for both lathe and mill operations using G-code and CAM platforms (e.g., Mastercam, Fusion 360, or equivalent), tailored to unique component geometries and material specifications., • Validate CNC programs through first-article inspections, ensuring dimensional accuracy, repeatability, and compliance with engineering drawings, MIL-STDs, and SUBSAFE/SOC requirements., • Oversee the setup and proper utilization of CNC and manual machines, ensuring tooling, fixturing, and work-holding strategies are appropriate for the task and aligned with best practices., • Instruct, train, and mentor machinists in advanced machining techniques, CNC programming fundamentals, machine setup, and precision measurement methods., • Monitor and troubleshoot machining operations, providing hands-on technical support to resolve issues related to tooling, feeds/speeds, surface finish, and tolerance stack-ups., • Schedule, prioritize, and control shop production tasks and projects to meet deadlines while optimizing manpower and machine utilization., • Ensure efficient use of labor and materials, maintaining accountability for man-hour expenditures and minimizing waste., • Recommend and implement improvements in machinery, equipment, tooling, and production methods to enhance quality, safety, and throughput., • Review and approve Technical Work Document packages (REC, CWP, TGI) before job release, ensuring full scope coverage and identifying special reference readings for system reinstallation or certification., • Audit completed Technical Work Document packages to verify all requirements and objective quality evidence (OQE) are met; sign, • Re-Entry Control (REC) documentation per OII-MSD Quality Assurance Manual., • Ensure accurate and timely completion of production documentation, including time reporting, QA inspection records, and material purchase requests., • Maintain and communicate production status updates to the Project Manager, identifying risks and proposing mitigation strategies., • Conduct periodic performance evaluations of machinists, providing constructive feedback and enforcing disciplinary actions in accordance with company policies., • Assist in estimating labor, material, and scheduling requirements for new and ongoing projects., • Operate machine tools and equipment when necessary to support production or training efforts., • Support special projects and other duties as assigned, including extended hours and after-hours support as required. REQUIRED: • High School Diploma/GED, • Minimum three (3) years of supervisory experience in a precision machine shop environment., • Minimum ten (10) years of manual and CNC machining experience, • Demonstrated knowledge of trade tools, precision instruments, and machining resources., • Supervisory experience in a Naval or shipyard environment., • Strong foundational leadership, coaching, and mentoring abilities., • Excellent communication and interpersonal skills across all levels of the organization., • Strong attention to detail., • Ability to follow detailed instructions and strict quality requirements. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The primary responsibility of this position is to set up and operate a Flow & OMAX Waterjet machine. Must understand, operate, and maintain the waterjet machine including any support equipment required to accomplish assigned tasks. This position also requires completing documentation properly and housekeeping of the area. This role supports Oceaneering's Marine Services Division (MSD) and is located in Chesapeake, VA. Travel is not expected or required. • Set up and operate both Flow Waterjet and OMAX Waterjet cutting systems to produce components in accordance with drawings, specifications, and work instructions., • Interpret technical drawings, models, and technical work documents to ensure parts are cut with appropriate tolerances, edge quality, and stock allowance to support downstream machining operations., • Perform complete machine setup including material loading, fixturing, nozzle alignment, abrasive loading, pump startup, and verification of cutting parameters., • Program, edit, and troubleshoot cutting programs at the machine as needed (including modifying DX files, tool paths, lead-ins/outs, kerf compensation, and quality settings) to support production flow and reduce backlog., • Select and verify correct materials and thickness prior to cutting; adjust machine parameters accordingly., • Perform in-process and final inspections using Precision Measuring Instruments (PMI) including calipers, micrometers, scales, and other measuring devices to ensure dimensional compliance., • Accurately complete all required production and inspection documentation, • Perform routine preventative maintenance on waterjet systems including pump inspections, nozzle/orifice replacement, abrasive system maintenance, filter changes, and general equipment upkeep., • Troubleshoot minor equipment issues and coordinate with maintenance personnel as required., • Maintain a clean, safe, and organized work area in accordance with company safety and housekeeping standards., • Support production priorities and collaborate with machinists and programmers to ensure parts are optimized for downstream machining operations., • Follow all safety procedures related to high-pressure waterjet systems and abrasive materials. REQUIRED: • High school diploma or equivalent, • Minimum three (3) years' experience operating CNC waterjet cutting systems, preferably Flow and/or OMAX equipment., • Experience using Precision Measuring Instruments (PMI) for in-process and final inspection., • Ability to read and interpret engineering drawings, blueprints, and technical specifications., • Working knowledge of CNC programming with the ability to edit and adjust programs at the machine., • Strong understanding of tolerances and how waterjet cutting impacts downstream machining operations., • Mechanical aptitude with ability to perform routine maintenance and basic troubleshooting., • Ability to complete production and inspection documentation accurately., • Journeyman-level Inside Machinist or equivalent trade experience., • Experience supporting precision machining operations., • Must have excellent oral and written communications skills., • Ability to rely on experience and judgment to plan and accomplish goals., • Ability to successfully reach company goals in an environment in which a wide degree of creativity and latitude is required., • Ability to represent MSD in a positive manner while adhering to the organization's core values. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking a highly skilled Inside Machinist with CNC programming, setup, and machining expertise to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires mastery of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. CNC PROGRAMMING & SETUP: • Review, edit, and optimize CNC programs (lathe and mill) using G-code and CAM platforms., • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines., • Perform the setup and operation of a wide range of equipment including lathes, mills, grinders, saws, and related shop machinery., • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys., • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes., • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents., • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment., • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances., • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes., • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements., • Support continuous improvement in tooling, fixturing, machining methods, and program efficiency. REQUIRED: • High School Diploma/GED, • Minimum eight (8) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment., • Ability to develop new programs or machining strategies across manual and/or CNC machines., • Ability to perform advanced setups, optimize tool paths, and improve setup instruction sheets on multiple machines., • Ability to operate both CNC and manual machine tools, develop fixturing and processes, and troubleshoot issues without supervision or guidance., • Able to read, interpret, and evaluate advanced blueprints, drawings, GD&T, and technical specifications for manufacturability without supervision or guidance., • Ability to perform multi-axis machining operations (e.g., 4-axis or 5-axis mills) as applicable., • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.)., • Ability to perform First Article Inspections and resolve issues to make sustainable quality improvements., • Demonstrated knowledge and proficiency in machining practices for tight-tolerance, critical components., • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements., • Ability to work independently, problem-solve, and train others., • Experience with exotic alloys and challenging machining conditions., • Familiarity with NAVSEA or military specifications., • CAM software experience (Mastercam, SolidWorks, etc.)., • Demonstrates high attention to detail and exhibits technical excellence and leadership qualities to drive culture of continuous improvement., • Strong communication skills with a collaborative mindset., • Ability to act as a liaison between supervision and other departments, such as Quality or Engineering., • Adaptable and resourceful - able to plan work and think critically in a one-off production environment., • Willingness and ability to train less experienced Inside Machinists to support a culture of continued learning and growth., • Leads by example; prioritizes and models safety culture and assists in reviewing cleanliness of work area. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: • Primarily indoors during the day and occasionally at night., • May require working on or near moving equipment and vibrating equipment., • May be exposed to intense light from welding operations., • Occasional exposure to open fire/flames/sparks from welding and grinding operations., • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds., • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects., • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection as required for the conditions., • Be able to recognize and react to alarms. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking Inside Machinists to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. CNC PROGRAMMING & SETUP: • Review and run CNC programs (lathe and mill) using G-code and CAM platforms., • Perform the setup and basic operation of equipment, including lathes, mills, grinders, saws, and/or related shop machinery., • Understand and follow all company, OSHA, and NAVSEA safety and cleanliness requirements. REQUIRED: • High School Diploma/GED., • Ability to perform basic machine operation, tool use, and measurements., • Ability to read and interpret simple blueprints and drawings, and identify basic GD&T., • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.)., • Ability to use basic PMI, with assistance., • Ability to follow setup instructions and run programs on one machine type., • Experience machining submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment., • Demonstrates attention to detail., • Strong communication skills with a collaborative mindset., • Prioritizes safety and maintaining a clean and organized work area. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: • Primarily indoors during the day and occasionally at night., • May require working on or near moving equipment and vibrating equipment., • May be exposed to intense light from welding operations., • Occasional exposure to open fire/flames/sparks from welding and grinding operations., • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds., • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects., • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection as required for the conditions., • Be able to recognize and react to alarms. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job Description Join Our Team as a CNC Machinist! DBS Staffing Services, Inc. is excited to offer an outstanding opportunity for skilled CNC Machinists. As a family-owned staffing company, we specialize in matching talented individuals with innovative companies. If you are passionate about precision machining and thrive in a dynamic environment, we want to hear from you! Responsibilities • Set up, operate, and maintain CNC machines to produce high-quality parts according to specifications., • Interpret and read technical drawings and blueprints., • Perform regular inspections using precision measuring tools to ensure accuracy., • Make necessary adjustments to tooling and machining parameters for optimal performance., • Conduct routine maintenance on CNC machines and report any issues to management., • Adhere to all safety protocols and maintain a clean working environment., • High school diploma or equivalent; technical certification in CNC machining preferred., • Proven experience as a CNC Machinist, with expertise in operating CNC lathes and mills., • Strong understanding of G-code programming and CNC machine setup., • Proficient in reading and interpreting technical drawings and blueprints., • Experience with precision measuring instruments such as calipers and micrometers., • Attention to detail and commitment to producing high-quality work., • Strong problem-solving abilities and mechanical aptitude., • Ability to work well in a team and communicate effectively., • Flexibility to work shifts and overtime as needed. Why Choose Us? Embrace a rewarding career as a CNC Machinist with a leading company that values your skills and dedication. We offer competitive compensation, opportunities for advancement, and a supportive work environment where you can grow and succeed in your career. Join our team at DBS Staffing Services, Inc. and be part of a family that truly appreciates your contributions! Benefits Our client is excited to support you in building a rewarding long-term career with their team. Why not kick things off by applying for this position and let your skills shine? They value growth and development for everyone, creating a wonderful workplace for all individuals regardless of gender.

Aerotek - - Responsibilities: Read and interpret complex blueprints, diagrams, and sketches; Operate lathes and perform optical alignment and hydrostatic testing; Install hull inserts, main engines, propulsion plant machinery, and related equipment; Overhaul valves (steam and WOG), perform AC & ref

Night Shift differential pay and OT pay are additional. We are looking for candidates who are willing and able to work the Night Shift for this position. The official hours are 3:00pm-11pm, however, depending on the job we are contracted to- the candidate must be flexible and willing to work later a

The inside machinist operates in three sections: Machining, Valves, and Pumps.Responsibilities and functional knowledge vary based on the designated section.All inside machinists are encouraged, but not required, to gain experience in any section other than their designated section.Key responsibilit

CNC Machinist will set up and operate manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair, and alteration of machinery, machine parts, tools, and equipment.Collins Machine Works has positions open for both day and night shift at both our Fifth Str

Essential Duties and Responsibilities:.Read and interpret blueprints, technical drawings, and shop sketches.Set up and operate a variety of CNC machines to perform tasks such as drilling, grinding, milling etc.Build fixtures and various holding devices as needed to hold or support work pieces in pro

We are seeking a skilled CNC Machinist to set up, operate, and maintain CNC machines used to manufacture precision parts and components.The CNC Machinist will be responsible for interpreting technical drawings, ensuring quality standards are met, and making program or tooling adjustments as necessar

As a Conventional Machinist you will be performing moderately complex assignments in support of our repair and maintenance of OEM equipment.

Our client is seeking multiple skilled.CNC equipment to produce precision parts according to specifications.The ideal candidate has hands-on experience with CNC programming, strong attention to detail, and a commitment to quality and safety.Set up and operate manual and CNC equipment.Read and interp

Use all conventional machine shop equipment and machinery to cut, machine and shape raw materials in accordance with drawing requirements.

Job DescriptionSalary: $32.16/hr Summary Outside Machinists are responsible for the disassembly, installation, maintenance, and repair of a wide range of mechanical and marine equipment, including pumps, valves, turbines, and gear systems, in a safe and efficient manner. This role requires the ability to read and interpret technical drawings, use precision measuring instruments, operate power and machining tools, and work with various metals to support shipboard and industrial systems. 1st Class Mechanics are expected to independently receive assignments, plan the work, identify material requirements, and execute tasks efficiently and accurately. Duties & Responsibilities • Wear required personal protective equipment (PPE) and always adhere to all OSHA safety standards and company safety policies., • Must adhere to all applicable safety, technical, and regulatory guidelines, including but not limited to:, • Company policies and procedures, • Local, state, and federal regulations, • ABS, NAVSEA Standard Items, and MSC GTRs, • MIL-STD (e.g., 1689-A, 2035), • General Specifications for Overhaul of Ships, • OSHA 2268, • Proficient at reading and interpreting blueprints, technical drawings, specifications, and work authorization forms (WAFs) to guide mechanical work processes., • Use precision measuring instruments such as tape measures, dial indicators, slide calipers, and telescoping gauges to verify dimensions and alignments., • Operate and maintain hand and power tools commonly used in mechanical and marine equipment repair., • Disassemble and overhaul a variety of mechanical and marine equipment, including pumps, valves, winches, gearboxes, turbines, condensers, etc., • Remove, repair, modify, or overhaul shipboard systems such as hydraulics, reduction gears, generators, anchor windlasses, and other marine equipment., • Troubleshoot and repair a wide range of industrial and marine mechanical equipment, including ANSI pumps, compressors, blowers, fans, gearboxes, extruders, mixers, agitators, and blenders., • Apply working knowledge of materials including bronze, brass, mild steel, heat-treated steel, and stainless steel in fabrication and repair processes., • Install below-deck auxiliary equipment (e.g., evaporators, stills, heaters, condensers, boilers) and connect them to steam piping systems., • Possess and maintain personal tools and equipment necessary to accomplish their trade responsibilities., • Conduct self-inspections to ensure work meets quality standards and complies with applicable drawings and specifications., • Provide guidance and train junior craftsmen, providing direction as a senior mechanic when required., • Maintain a good attendance record, demonstrate a positive and professional attitude, work well with others, take pride in your work, and be receptive to constructive feedback from mentors (supervisor, PMT, etc.). Experience Requirements • 4 - 6 years of experience as a Machinist in a shipyard. Other Requirements • Must be able to work in various environmental conditions including outdoor weather, heights, confined spaces, loud noise, and exposure to airborne particles or fumes., • Must be able to wear a respirator as required for specific tasks and maintain compliance with fit testing and respiratory protection protocols., • Regularly required to sit, reach, and use hands for handling or operating tools and equipment., • Occasionally required to stoop, bend, squat, crawl, and climb ladders or structures (e.g., masts, tanks, voids)., • Must be able to lift and move up to 50 lbs. independently and seek assistance for heavier loads., • Must be able to pass Drug Screening, Work Ability Screening., • Must be able to obtain a Government facility security pass and badges at the various shipyards Tcnico works at (e.g., MHI, BAE, NASSCO, HII)., • Availability to work overtime, weekends, or travel to alternate worksites when project needs demand., • Perform other duties as assigned.

Job DescriptionSalary: $20-30/HR depending on experience Collins Machine Works is looking for a Wire EDM Machinist that will be responsible for setting up, operating and troubleshooting Wire EDM machines to produce precision components. The ideal applicant must have a strong mechanical aptitude and the ability to read and interpret blueprints for complex parts. Applicant must be a US citizen. Access to DoD facilities is required. Company is not able to sponsor work visa for this position. Sign On Bonus Collins Machine Works offers a sign-on bonus in the amount of $2,000 to be paid after six months of satisfactory employment performance. Collins Machine Works also offers employee referral bonuses in the amount of $1,000 per referral to be paid after the referred employee has completed six months of satisfactory employment performance. Major Responsibilities & Essential Functions • Set up and operate CNC Wire EDM machines to cut and shape various precision parts, • Properly and safely select, align, secure, and remove holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Recognize, deploy, and properly use inserts, fixtures, and tooling, • Read and interpret applicable drawings and blueprints of work to be performed and follows instructions, • Must be able to determine the proper tools required to perform given task, • Operates and utilizes lifting aids as necessary to perform work, • Use precision measuring instruments to meet tolerance requirements (micrometers, calipers, dial indicators, etc.), • Perform daily, regular cleaning and light maintenance tasks on machinery and equipment, • Ability to read travelers, • Perform all tasks in a safe and responsible manner while maintaining safe and clean working environment by complying with procedures, rules, and regulations, • Work overtime as needed on evenings and/or weekends, • Communicates with others to coordinate work in plant, • Other duties as assigned Benefits • Medical, Dental and Vision Insurance, • 401K with company match, • Paid Time Off, • Short Term Disability and basic Life Insurance provided by company, • Supplementary Insurance: Accident, Critical Illness, Voluntary Life/AD&D, and Long Term Disability available, • Employee Assistance Programs, • Opportunity for yearly bonus, profit sharing, overtime, and night shift differential Qualifications • Understanding of Wire EDM process, setup, and maintenance, • Understanding of G, D, and T, • High school diploma or GED, • 3 to 5 years related experience is preferred, • Language skills - effectively communicate and understand job instructions both verbally and written in the English language, • Ability to effectively interpret and translate instructions to other employees in a professional and respectful manner, • Ability and willingness to learn, • Ability to define problems, collect data, establish facts, and draw valid conclusions, • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables, • A strong, proven interest in engineering and mechanical systems, • Read blueprints and precision measuring tools, • Ability to perform basic mathematical computations, • Ability to apply concepts such as fractions, percentages, rations, and proportions to practical situations, • Must have basic machinist tools Physical Demands • Ability to move or transfer products with an overhead crane, • Ability to lift and move up to 50 lbs. at a time when required, • While performing the duties of the job, the employee is regularly required to stand, walk, reach overhead with hands and arms, stoop, crouch, kneel, climb ladders, and use stairs, • Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus, • The employee will also be expected to spend time using a computer Work Environment • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job, • The noise level in the work environment is usually moderate to high

Job DescriptionSalary: $25-35/HR depending on experience CNC Machinist will set up and operate manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair, and alteration of machinery, machine parts, tools, and equipment. Collins Machine Works has positions open for both day and night shift at both our Fifth Street and Syer Road locations in Portsmouth, Virginia. Applicant must be a US citizen. Access to DoD facilities is required. Company is not able to sponsor work visa for this position. Sign On Bonus Collins Machine Works offers a sign on bonus in the amount of $2,000 to be paid after six months of satisfactory employment performance. Collins Machine Works also offers employee referral bonuses in the amount of $1,000 per referral to be paid after the referred employee completed six months of satisfactory employment performance. Major Responsibilities & Essential Functions • Use precision tools, machinery, and equipment such as lathe, manual milling machine, drill press, hydraulic press, band saw, and a variety of cutting tools and equipment, • Fabricate and shape parts such as tools and machine parts out of metal, • Properly and safely select, align, secure, and remove holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Recognize, deploy, and properly use inserts, fixtures, and tooling, • Studies applicable drawings and prints of work to be performed and follows instructions, • Must be able to determine the proper tools required to perform given task, • Operates and utilizes lifting aids as necessary to perform work, • Use gauges and measuring instruments to meet tolerance requirements, • Perform daily, regular cleaning and light maintenance tasks on machinery and equipment, • Ability to track parts and jobs in JobBOSS and Travelers, • Perform all tasks in a safe and responsible manner while maintaining safe and clean working environment by complying with procedures, rules, and regulations, • Work overtime as needed on evenings and/or weekends, • Communicates with others to coordinate work in plant, • Other duties as assigned Preferred Machining Skills • Lathes, Grinders, Boring Mills, Planers, Portable Tools, • Turn, Drill, Tap, Bore, Hone, Polish machine processes, • Large part machining experience preferred (ship propeller shafting, ship steering gear, etc.), • In-place machining experience is desired, • Forklift and Crane experience preferred Qualifications • High school diploma or GED, • 3 to 5 years related experience is preferred, • Language skills - effectively communicate and understand job instructions both verbally and written in the English language, • Ability to effectively interpret and translate instructions to other employees in a professional and respectful manner, • Familiarity with Fanuc, Mazatrol, Okuma, DMG/Mori CNC controls, • Have experience with maintaining 0.001" tolerances, • Have a basic understanding of G, D and T, • Have experience in job setup on vertical and horizontal CNC machining centers and CNC turning centers, • Willing to work at both Portsmouth, VA locations as job needs require, • Ability and willingness to learn, • Ability to define problems, collect data, establish facts, and draw valid conclusions, • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables, • A strong, proven interest in engineering and mechanical systems, • Read blueprints and measuring tools, • Ability to perform basic mathematical computations, • Ability to apply concepts such as fractions, percentages, rations, and proportions to practical situations PHYSICAL DEMANDS • Ability to move or transfer products with an overhead crane, • Ability to lift and move up to 50 lbs. at a time when required, • While performing the duties of the job, the employee is regularly required to stand, walk, reach overhead with hands and arms, stoop, crouch, kneel, climb ladders, and use stairs, • Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus, • The employee will also be expected to spend time using a computer WORK ENVIRONMENT • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job., • The noise level in the work environment is usually moderate to high.

Job Description Venture Dynamics is seeking skilled Inside Machinists to support Navy and commercial ship repair operations. The Inside Machinist performs precision machining, fabrication, and refurbishment of propulsion and auxiliary system components. Work is primarily shop-based with occasional support to shipboard repair activities as required. This position supports shipyard projects throughout the Virginia Hampton Roads region. Per diem may be available depending on contract requirements and travel distance. Responsibilities • Set up and operate manual lathes, vertical and horizontal milling machines, boring mills, and drill presses, • Perform turning, facing, threading, boring, and milling operations to tight tolerances (typically within .0005–.001 inches), • Determine proper tooling, speeds, and feeds based on material and machining requirements, • Align and secure holding fixtures, attachments, accessories, and materials prior to machining, • Read and interpret blueprints, NAVSEA technical drawings, and machining sketches, • Machine and refurbish shafts, sleeves, bushings, valve seats, pump housings, and related components, • Measure and verify dimensions using micrometers, Vernier calipers, height gauges, dial indicators, and bore gauges, • Minimum 5 years of experience as an Inside Machinist or Manual Machinist in shipyard or heavy industrial environments, • Strong proficiency operating manual lathes and milling machines, • Ability to independently determine machining sequences, tooling, and tolerances, • Ability to read and interpret complex mechanical drawings and specifications, • Experience machining marine-grade materials and alloys, • Valid driver’s license with a clean driving record, • Ability to obtain and maintain required base access credentials, including DBIDS, • Experience supporting Navy ship repair or availability-level work, • Familiarity with NAVSEA Standard Items related to fabrication, • OSHA 10 Maritime certification Work is performed primarily in machine shop and industrial shipyard environments supporting Navy and commercial ship repair operations. Occasional vessel access may be required to support measurement, fit-up verification, or component installation activities. Exposure to industrial noise, rotating machinery, heat, and shop conditions is expected. PPE is required in accordance with site safety policies, and respiratory protection may be required based on task or location. Work schedules may include overtime, nights, weekends, and variable shifts depending on production requirements. Venture Dynamics is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status in accordance with applicable law.

Job Description Hutco, Inc. Position Title: Outside Machinist Location: Newport News, VA Branch: Portsmouth Shift: All Shifts Security Clearance: Not Required Start Date: September 24, 2025 Duration: 12 Months Hours per Week: 40 Pay Rate: $27.31/hr ( $120.00 a day Perdiem for those who qualify) Position Summary Hutco, Inc. is seeking experienced Outside Machinists to support shipyard operations at the Newport News Shipbuilding facility. Candidates must have at least 4 years of shipyard or naval experience as a First-Class Machinist. This role demands familiarity with shipboard mechanical systems, the ability to work from technical drawings, and a strong commitment to safety and quality. Primary Responsibilities • Perform mechanical repairs, overhauls, and installations on shipboard equipment., • Read and interpret blueprints, sketches, schematics, and technical manuals., • Work with various systems and equipment including:, • Winches, anchor windlasses, steering gear, • Air compressors, valves, and pumps, • Diesel engines, gas turbines, reduction gears, • Propulsion systems, shafts, propellers, rudders, • Generators, steam turbines, hydraulic systems, • Elevators, doors, weapons systems, deck equipment, • Conduct valve overhauls (steam/WOG), lube oil flushing, hydrostatic testing, and optical alignment., • Perform shaft alignment and precision fitting using tools such as:, • Micrometers, dial indicators, rulers, and calipers, • Torque wrenches, grinders, boring bars, drill presses, portable mills, • Experience: 4+ years as a First-Class Machinist in shipyard or naval settings., • Technical Proficiency:, • Skilled in precision measuring instruments and alignment tools., • Familiarity with hull insert installations, fasteners, and shipbuilding nomenclature., • Must be capable of working from blueprints and performing complex mechanical work., • Physical Requirements:, • Capable of lifting 50 lbs regularly and working in confined spaces., • Must be able to climb ladders, work at heights, and perform physically demanding tasks., • Tolerance for varied temperatures and humidity conditions. Work Environment & Physical Demands Task/Ability Required Lifting/Carrying (up to 50 lbs) ✅ Standing/Walking (75%+ of shift) ✅ Climbing Ladders ✅ Working in Confined Spaces ✅ Exposure to Dust, Fumes, Odors ✅ Use of Tools and Machinery ✅ Visual/Hearing/Talking ✅ Temperature Extremes ✅ Reporting Structure • Reports To: Assigned Shop Foreman or Project Supervisor, • Works With: Planning, QA, Safety, and Production Teams A limited benefit plan is available to Hutco Inc. employees through Essential Staff Care. Available plans include: • Medical/Prescription, • Dental Coverage, • Vision Coverage, • Short Term Disability, • Term Life Benefits Contact Hutco Today! Apply online or contact us directly for more details. Contact: Hutco, Inc. – Portsmouth Branch ???? Phone: (757) 223-7680 ???? Email: #HUTCOSP

Job Description$35/hr + $140 per diem availableBoatswains Mate / Machinist Mate / Outside Machinist Needed! **clearance preferred but not required Job is located in Newport News, Virginia Responsibilities • Minimum 4 years of experience as a machinist mate, marine mechanic, engine man, or outside machinist., • Ability to read and interpret complex blueprints, diagrams, and sketches., • Skilled in precision measuring tools (micrometers, calipers, rulers)., • Install hull inserts, main engines, propulsion plant machinery, and related equipment., • Overhaul valves (steam and WOG), perform AC & refrigeration repairs., • Operate lathes and perform optical alignment and hydrostatic testing., • Install components such as aircraft elevators, anchor windlass, masts, antennas, and arresting gear., • Use precision instruments for lapping, blue checking, and fitting liners., • Perform lube oil flushing, flange makeup, and ballast tank installation., • Conduct testing on main engines and boiler operations., • Handle shafting and bearing work, including sea valve and turbine installation., • Operate heavy machinery such as cargo cranes and portable milling/drill machines. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: Job Title: Machinist II Classification: Full-time, Hourly Non-Exempt Reports To: Production Manager Location: Kymera – Thermal Spray Solutions Job Overview: The Machinist II is responsible for operating large lathe and grinding equipment to support repairs to naval propulsion shafts and large commercial hydraulic rods. The primary duties of the machinist will be to prepare propulsion shafts and hydraulic rods for the purpose of thermal spraying, utilize industrial cranes and hoist operation to move and position equipment to be rough machine for the thermal spray process and precision grind to finial dimensions by utilizing micrometers and other required calibration instruments. Final machining is done by tool-post grinding operations (e.g., precision grinding). Use of various hand-held and stationary power and non-power tools, including but not limited to band saws, belt sanders, hand grinders, files, etc. will be required in support of set up operations. Responsibilities: • Lathe Operation: Operate large lathes to perform precise machining tasks, ensuring parts meet required specifications., • Grinding Operations: Perform grinding operations to finish parts to precise dimensions, including setup and operation of surface grinders and cylindrical grinders., • Blueprint Interpretation: Read and interpret engineering drawings and technical specifications to ensure proper machining processes are followed., • Machine Setup: Set up and adjust machines for different operations, ensuring proper alignment, tooling, and settings are in place., • Quality Control: Inspect machined parts for quality and accuracy, using precision measuring tools (e.g., micrometers, calipers) to ensure parts meet customer and company standards., • Machine Maintenance: Perform routine maintenance and minor repairs on machines to ensure optimal performance and prevent downtime., • Troubleshooting: Identify and troubleshoot operational issues with machinery, tooling, or processes to resolve problems and minimize delays., • Safety Compliance: Adhere to all safety protocols and procedures, ensuring a safe work environment., • Lifting and Hoisting: Safely lift or hoist workpieces as needed., • Work Area Maintenance: Maintain a clean, organized, and safe work area at all times., • Maintain Calibration: Learn to utilize calibrated measuring instruments – as well as inspect for good order and use at every use., • ISO 9001 Certification: Learn, Practice and Understand the customer satisfaction and on-time delivery process. At Kymera International - Thermal Spray Solutions, we provide a competitive benefits package to support your health, well-being, and financial security, including: • Generous Time Off: 11 annual company-paid holidays and PTO., • Healthcare Savings: Flexible Spending Accounts (FSA), Health Savings Accounts (HSA), and comprehensive dental and vision coverage., • Retirement Support: 401(k) plan with a competitive company match., • Insurance Coverage: Company-paid short-term disability and life insurance, with additional voluntary options like critical illness, hospital care, and long-term disability coverage., • Competitive pay., • Proficiency in operating large lathes and performing precision grinding operations in a machine shop environment, with a minimum of 4 years of hands-on experience., • Proficient in reading and interpreting engineering drawings and technical specifications., • Strong knowledge of machining processes, tooling, and material properties, with the ability to apply this understanding to optimize machining operations and ensure quality output., • Proficient in using precision measuring instruments, including micrometers, calipers, and gauges, to ensure accurate machining., • Demonstrated ability to troubleshoot and resolve basic machine malfunctions and process issues in a machining environment., • Attention to detail and commitment to producing high-quality components., • Good communication skills to collaborate effectively with team members., • Ability to thrive in the dynamic environment of a small company, where roles are flexible and often blend responsibilities across multiple positions is required. This requires a high degree of adaptability, the ability to manage rapid change, and a willingness to step into different roles as needed to support the company's growth and success., • Safety awareness and commitment to maintaining a safe and efficient work environment., • High school diploma or equivalent required; technical certification or an associate degree in Machining, Engineering, or a related field preferred., • Minimum of 4 years of experience in large lathe operation and grinding within a production or machine shop environment., • Experience with precision measuring instruments, such as micrometers, calipers, and gauges., • Ability to stand, walk, and perform repetitive manual tasks for extended periods., • Strength to lift, carry, push, or pull up to 50 pounds unassisted., • Capability to perform physical tasks such as bending, kneeling, crouching, and reaching., • Coordination and manual dexterity to safely operate machinery, tools, and equipment while maintaining focus on ergonomics and safety., • Ability to work safely in environments with potential exposure to dust, fumes, and noise.

Job DescriptionSalary: $20-35/HR depending on experience With Collins Machine Works Outside or On-Site Machinists will set and operate manually controlled machines in skilled precision to perform repairs to equipment, vessels, and mechanical structures at customer facilities or at our Fifth Street and Syer Road locations in Portsmouth, Virginia. Our On-Site Machinists travel to customer locations locally, throughout the United States, and abroad to perform site surveys and carry out repairs. We are looking for candidates who are willing and able to work the Night Shift for this position. The official hours are 3:00pm-11pm, however, depending on the job we are contracted to- the candidate must be flexible and willing to work later and longer shifts as needed. Night Shift differential pay and OT pay are additional. Applicant must be a US citizen. Access to DoD facilities is required. Company is not able to sponsor work visa for this position. Sign On Bonus Collins Machine Works offers a sign on bonus in the amount of $2,000 to be paid after six months of satisfactory employment performance. Collins Machine Works also offers employee referral bonuses in the amount of $1,000 per referral to be paid after the referred employee completed six months of satisfactory employment performance. Major Responsibilities & Essential Functions • Transport and set up tools, machinery, and fixtures to support machining operations, • Perform machining operations using equipment such as: portable milling machines, clamshell lathes, line boring systems, grinding machines, hydraulic tensioning systems, as well as various hand and power tools., • Take measurements of machined features using precision measuring equipment, • Properly and safely select, align, secure, and remove holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Recognize, deploy, and properly use inserts, fixtures, and tooling, • Performs mechanical assembly and disassembly of equipment using a variety of hand and power tools, • Studies applicable drawings and prints of work to be performed and follows instructions, • Must be able to determine the proper tools required to perform given task, • Operates and utilizes lifting aids as necessary to perform work, • Communicates with customers and government representatives to coordinate work onsite, • Ability to track parts and jobs in JobBOSS and Travelers, • Perform all tasks in a safe and responsible manner while maintaining safe and clean working environment by complying with procedures, rules, and regulations, • Completes inspection and as-found condition reports for completed work, • Work overtime as needed on evenings and/or weekends, • Other duties as assigned Preferred Machining Skills • Lathes, Grinders, Boring Mills, Planers, Portable Tools, • Turn, Drill, Tap, Bore, Hone, Polish machine processes, • Large part machining experience preferred (ship propeller shafting, ship steering gear, etc.) Benefits • Medical, Dental and Vision Insurance, • 401K with company match, • Paid Time Off, • Short Term Disability and basic Life Insurance provided by company, • Supplementary Insurance: Accident, Critical Illness, Voluntary Life/AD&D, and Long Term Disability available, • Employee Assistance Programs Qualifications • High school diploma or GED, • 3 to 5 years related experience is preferred, • Language skills - effectively communicate and understand job instructions verbally and written in English, • Ability to effectively interpret and translate instructions to other employees in a professional and respectful manner, • Ability and willingness to learn, • Ability to define problems, collect data, establish facts, and draw valid conclusions, • Ability to interpret various technical instructions in mathematical or diagram form and deal with several abstract and concrete variables, • A strong, proven interest in engineering and mechanical systems, • Ability to read and interpret blueprints, • Ability to read precision measuring tools, • Ability to perform basic mathematical computations, • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations, • Ability to work independently and as part as a team, • Basic understanding of Microsoft Word and Excel PHYSICAL DEMANDS • Ability to move or transfer products with an overhead crane, • Ability to lift and move up to 50 lbs. at a time when required, • While performing the duties of the job, the employee is regularly required to stand, walk, reach overhead with hands and arms, stoop, crouch, kneel, climb ladders, and use stairs, • Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus, • The employee will also be expected to spend time using a computer WORK ENVIRONMENT • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job., • The noise level in the work environment is usually moderate to high.

Job Description Hutco, Inc. Position: Inside Machinist (Large Machine Operator) Location: Newport News, VA Branch: Portsmouth Pay Rate: $37.50 And $120.00 per-diem for those who qualify Position Overview Hutco is seeking experienced Inside Machinists (Large Machine Operators) that have worked in a high mix low volume type of environment where complex setups on large CNC machines are accomplished. This position involves Machining large parts such as weldments, and castings where the material is inconsistent in size and shape and decision making on the machinists’ part is required with a strong background in blueprint reading/interpretation and geometric dimensioning and tolerancing. The perfect candidate would be one with a minimum 4 year apprenticeship in the trade or comparable technical school training, who learned the trade on manual machines in a job shop environment, and transitioned to enclosed CNC equipment, before becoming a large CNC horizontal boring mill operator 5” diameter spindle or larger, large CNC lathe operator machining parts in excess of 30” in diameter and 20’ in length, and large CNC vertical turning center operator with tables of 6’ in diameter or larger. Key Responsibilities • Operate Horizontal Boring Mills and Vertical Milling Machines, including Bridge/Gantry type mills with multiple head attachments., • Perform multi-axis machining, ideally with experience in 3+2 or 5-axis machining., • Execute threading, drilling, and tapping processes with a high degree of accuracy., • Comprehend and interpret complex mechanical drawings and blueprints., • Perform precision measurements using instruments such as micrometers, verniers, and depth gauges., • Ensure proper tooling offsets and data inputs using controllers like Fanuc, Siemens, Acramatic, and Cincinnati-Milacron., • Experience: Minimum of 5 years as an Inside-Shop Machinist., • Technical Skills: Proficient with NC processes, Manual Data Input, Tooling Offsets, and operation of manual/NC machines., • Machinery Proficiency: Experienced in working with large parts (up to 30 feet in length) and various metals., • Certifications: Completion of a Machinist or Tool & Die Apprenticeship is highly preferred., • Safety Training: Compliance with OSHA standards, including confined space training, PPE training, and audiometric testing. Special Requirements • Experience with Large Machinery: Extensive experience on Horizontal Boring Mills and Vertical Milling Machines., • Multi-Axis Machining Background: Familiarity with 3+2 or 5-axis machining is preferred. A limited benefit plan is available to Hutco Inc. employees through Essential Staff Care. The hotel is advanced for the first two weeks (loan). Available plans include: • Medical/Prescription, • Dental Coverage, • Vision Coverage, • Short Term Disability, • Term Life Benefits, • Accidental Death & Dismemberment Benefit How to Apply CONTACT HUTCO TODAY! Apply online or visit the Portsmouth Branch: Address: 728 High Street Suite 200 Portsmouth, VA 23704 Send resumes to or call us at (757) 223-7680. Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Job Description Here at Global - a 1st Flagship Company (), a woman-owned small business, we are committed to Individual Accountability, Growth, Integrity, and Respect. As a leader in Marine Support Services and Emergency Management, we have proudly supported the Department of the Navy since 1964, managing, operating, and maintaining the U.S. Navy fleet in locations such as Norfolk, Philadelphia, Bremerton, California, and Hawaii. We are currently seeking skilled Outside Marine Machinists for a potential 5-year project in Norfolk, VA. This opportunity involves hands-on labor working at the Norfolk Naval Shipyard, offering a dynamic and fast-paced environment for experienced professionals. Note: This position is contingent upon contract award. Employment will begin only if and when the company secures the government contract associated with this role. Overview: Maintain, repair, and install shipboard mechanical systems and equipment. Responsibilities: • Disassemble, repair, and align pumps, motors, and valves., • Install and test propulsion and auxiliary machinery., • Operate precision tools for measurements and alignments., • Active DoD Secret clearance required., • 4+ years as a machinist, with at least 2+ years on Navy ships., • Completion of a formal trade training program (trade school, military training, apprenticeship, or equivalent) required., • Ability to read technical manuals and use precision tools., • Ability to work 1st, 2nd and 3rd shift. Global- a 1st Flagship Company is an E-Verify and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, gender expression, age, status as a protected veteran, or status as a qualified individual with disability. #ZR As a federal contractor all employment offers are contingent on passing a pre-employment background check and drug screen. Job Posted by ApplicantPro

Job Description Venture Dynamics is seeking skilled and experienced Outside Machinists to perform advanced mechanical installation, repair, alignment, and maintenance of shipboard machinery and equipment aboard Navy and commercial vessels. Outside Machinists will disassemble, troubleshoot, align, and reinstall pumps, valves, rotating equipment, propulsion components, and associated mechanical systems. This position requires strong mechanical aptitude, precision measurement skills, and the ability to work safely in confined spaces, elevated areas, and industrial shipyard environments. This position supports shipyard projects throughout the Virginia Hampton Roads region. Per diem may be available on select projects depending on contract requirements and travel distance. Responsibilities • Install, remove, repair, and align shipboard machinery and mechanical systems, • Disassemble and rebuild pumps, valves, gearboxes, motors, and rotating equipment, • Perform shaft, pump, and equipment alignments using dial indicators, feeler gauges, micrometers, calipers, and other precision tools, • Install bearings, seals, couplings, rotating components, and machinery foundations, • Troubleshoot mechanical issues and support corrective actions, • Read and interpret blueprints, schematics, mechanical drawings, and technical manuals, • Use hand tools, power tools, and precision instruments for fit-up, measurement, and mechanical adjustments, • Assist with staging, rigging, lifting, and material movement as required, • Work in machinery spaces, tanks, voids, overheads, and other shipboard compartments, • Follow NAVSEA mechanical safety requirements, OSHA Maritime standards, and all shipyard regulations, • Minimum 5 years of shipyard or marine mechanical experience as an Outside Machinist, • Strong understanding of pumps, valves, rotating machinery, propulsion equipment, and mechanical systems, • Proficiency using precision measurement tools (dial indicators, calipers, micrometers, feeler gauges, etc.), • Ability to read and interpret mechanical drawings, schematics, manuals, and technical instructions, • Must supply and maintain a personal tool set appropriate for mechanical repair (specialty tools provided when needed), • Ability to climb ladders, work in confined spaces, work at heights, and stand for extended periods, • Ability to lift 40–60 lbs and perform physically demanding mechanical tasks, • Must pass background check and drug screening per customer requirements, • Reliable transportation and consistent attendance, • Ability to obtain DBIDS/base access when required, • Experience performing precision alignments on propulsion equipment, pumps, and rotating machinery, • Experience with pump and valve teardown, rebuilds, flushing, and reinstallation, • Experience working aboard Navy vessels or to NAVSEA mechanical standards, • Familiarity with WAF/Tagout procedures, • Experience with laser alignment systems, • OSHA-10 Maritime, • Ability to wear a respirator when required for confined-space support, hot-work environments, or mechanical operations involving dust or fumes, • Work occurs aboard ships, in dry docks, machinery spaces, tanks, and industrial environments, • PPE provided according to project and customer requirements Venture Dynamics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Aerotek - JobID: JP-005849472 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines; Inspect, trim, test, fixture, assemble, and package products; Perform other duties as assigned.

You will serve as a MACHINIST LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.

Our openings include 1 dayshift machinist in our small motors department and 1 dayshift machinist in our pump department. We are currently seeking multiple Manual Machinists on first shift and second shift.

This position involves Machining large parts such as weldments, and castings where the material is inconsistent in size and shape and decision making on the machinists' part is required with a strong background in blueprint reading/interpretation and geometric dimensioning and tolerancing. Experienc

Oceaneering's Marine Services Division (MSD) is seeking Inside Machinists to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment.

The Machinist serves as a focal point of all machine operations within the company.

Oceaneering's Marine Services Division (MSD) is seeking a highly skilled Inside Machinist with CNC programming, setup, and machining expertise to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. Willingness and ability to train less exp

Outside Machinists are responsible for the disassembly, installation, maintenance, and repair of a wide range of mechanical and marine equipment, including pumps, valves, turbines, and gear systems, in a safe and efficient manner.

Outside machinist Installs ship machinery, for example propelling machinery, auxiliary motors, pumps, ventilating equipment, and steering gear, working from blueprints and using handtools, calipers, and micrometers.

Oceaneering's Marine Services Division (MSD) in Chesapeake, VA is seeking a highly skilled Inside Machinist Supervisor to oversee the daily operations of our machine shop. Supervise and coordinate daily production assignments, ensuring machinists are properly guided and supported in executing comple

Steel America is seeking 2nd Class Inside Machinists experienced in Manual Machining and/or CNC Mills & Lathes to support operations in the Inside Machine Shop in Norfolk, VA. Must have Manual Machinist experience as follows:. Under minimal supervision, a manual machinist sets up and operates manual

Oceaneering's Marine Services Division (MSD) is seeking Inside Machinists with CNC programming, setup, and machining experience to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. Willingness and ability to mentor less experienced Insid

Colonna's Shipyard, is seeking a 1st Class Outside Machinist to support 2nd Shift operations in our Shipyard in Norfolk, VA. Must have a High School Diploma or equivalent and at least seven (7) years' experience as a Marine Outside Machinist.

Immediate openings and urgently hiring!.Assures that a Work Authorization Form (WAF) ticket is on the job site and that it is for the specific job being accomplished, no work will be accomplished without a WAF posted at location of repairs.Assures that any other safety issues are complied with that

Requires no supervision and excels in all qualifications, is an expert in all tasks required as an Outside Machinist and will provide mentoring to junior craftsman.

Join HII as we keep the world's most powerful Navy afloat! This position supports the Carrier Engineering Maintenance Assist Team (CEMAT) as the Inside Machinist.

CNC Machinist will set up and operate manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair, and alteration of machinery, machine parts, tools, and equipment.

CNC Machinist will set up and operate manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair, and alteration of machinery, machine parts, tools, and equipment.

First-Class Machinist in shipyard or naval settings.