Engineering jobs in Chesapeake, VirginiaCreate job alerts

Overview: SimVentions, consistently voted one Virginia's Best Places to Work, is looking for an experienced network security professional to join our team! As a Network Security Engineer IV, you will perform all aspects of network security including the design, implementation, configuration, and control enforcement of security controls on hardware and software components of network devices. You will collaborate with Cybersecurity professionals on overall cyber readiness defense and system accreditation efforts. Position is contingent upon award of contract, anticipated in December of 2025. Clearance: An ACTIVE Secret clearance (IT Level II Tier 5 / Special-Sensitive Position) is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: • In-depth understanding of computer security, military system specifications, and DoD cybersecurity policies, • Strong ability to communicate clearly and succinctly in written and oral presentations, • Must possess one of the following DoD 8570.01-M IAT Level III baseline certifications:, • CASP+ CE, • CCNP Security, • CISA, • CISSP (Associate), • CISSP, • GCED, • GCIH, • CCSP Responsibilities:, • Design, implement, configure, and enforce network security controls across routers, switches, firewalls, and endpoint devices, • Manage enterprise level of Active Directory (AD), • Perform vulnerability assessments using the Assured Compliance Assessment Solution (ACAS) tool, • Configure and secure Cisco networking devices in accordance with DoD policies and Security Technical Implementation Guides (STIGs), • Utilize packet analyzer tools such as Wireshark and tcpdump, • Troubleshoot network connectivity issues and provide solutions, • Network Security to include the design, implementation, configuration, and enforcement of security controls on network, hardware, and software components and devices, • STIG implementation, • Management of enterprise level deployment of Active Directory, • Performing vulnerability assessments with the ACAS tool, • Configuration Cisco networking devices, • Analysis of network traffic utilizing tools such as Wireshark and tcpdump, • Troubleshooting network connectivity issues The projected annual compensation range for this position is $110,000-$170,000 (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we’re committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs. We offer: • Medical, dental, vision, and prescription drug coverage, • Employee Stock Ownership Plan (ESOP), • Competitive 401(k) programs, • Retirement and Financial Counselors, • Health Savings and Health Reimbursement Accounts, • Flexible Spending Accounts, • Life insurance, short- & long-term disability, • Continuing Education Assistance, • Paid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military), • Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counseling Support Our Warfighters SimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world. Drive Customer Success We deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact. Get Involved in Giving Back We believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year. Build Innovative Technology SimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer’s success. Work with Brilliant People We don’t just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture. Create Meaningful Solutions We are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve. Employees who join SimVentions will enjoy additional perks like: • Employee Ownership: Work with the best and help build YOUR company!, • Family focus: Work for a team that recognizes the importance of family time., • Culture: Add to our culture of technical excellence and collaboration., • Dress code: Business casual, we like to be comfortable while we work., • Resources: Excellent facilities, tools, and training opportunities to grow in your field., • Open communication: Work in an environment where your voice matters., • Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development., • Employee Appreciation: Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more., • Founding Partner of the FredNats Baseball team: Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite., • Food: We have a lot of food around here! FTAC

Job Description we are looking for someone to work on small engines, construction and landscapeing equiptment

Job Description100% ONSITE Who We Are: Founded in 2007, SimIS Inc. is an innovative information technology solution Veteran Owned Small Business (VOSB) that models future environments, requirements, and capabilities, and then secures the enterprise from internal and external threats compliant with Federal, State, and industry standard governance to ensure client mission success. Our performance standard is “excellence,” with an outcomes-based, quality focus in our services and products, guided by our core values of honesty (in word and deed), relationships (confidence and trust with clients and partners), teamwork (shared goals, mission, and purpose), loyalty (allegiance to our client and team), and importance of others (work and win as a team). SimIS is currently recruiting for the listed position Job Description: NATO HQ Supreme Allied Command Transformation (NATO SACT) is seeking contract support to access to leading-edge capabilities necessary to adapt to future threats, integrate advanced technologies to modernize the force, explore long-term military strategy to shape how NATO's forces will operate in the future, and promote interoperability between current and next-generation platforms. To support our NATO customer, SimIS seeks a Modeling and Simulation Engineer to guide the design and operation of complex simulation systems enabling the development and integration of emerging technologies to support NATO force design and strategic decision making. Education and Qualifications • Master's degree in Engineering, Computer Science, or Physics, • 8 years of experience in M&S management to include initiation, planning, and execution of M&S projects, • 5 years of experience supporting the design, planning and execution of wargames, exercises, experiments, or other similar events., • Simulation software expertise (AnyLogic, Arena, MATLAB/Simulink) is desirable., • Expertise in verification and validation methodologies, • 2 years’ experience in multinational/international military environments.Responsibilities, • Apply simulation systems to support the development of analytical studies at the operational and strategic level., • Develop digital representations of physical or conceptual systems, incorporating their inherent physics, mathematics, and logical structures., • Run simulation models to simulate a system's behavior, allowing for the study of dynamic changes and performance characteristics., • Analyze the resulting data to understand key performance indicators, identify critical decision points, and visualize system responses., • Design virtual experiments verify the efficacy of new designs and analyze the performance of existing or proposed systems., • Use M&S tools to support requirements definition, assessing program upgrades, and optimizing resource usage. Benefits:, • Medical, Dental, and Vision, • Short-Term Disability (at no cost to you) & Long-Term Disability, • Life Insurance, • 401(k) Savings Plan, • Flex Spending Accounts, • Tuition Assistance Program, • Professional Development, • Paid Time Off (PTO), • 11 Federal Holidays each year SimIS, Inc. is an EOE / M / F / Disability / VET / Drug Free Employer Powered by JazzHR Quo1k87nWt

Job Description100% ONSITE Who We Are: Founded in 2007, SimIS Inc. is an innovative information technology solution Veteran Owned Small Business (VOSB) that models future environments, requirements, and capabilities, and then secures the enterprise from internal and external threats compliant with Federal, State, and industry standard governance to ensure client mission success. Our performance standard is “excellence,” with an outcomes-based, quality focus in our services and products, guided by our core values of honesty (in word and deed), relationships (confidence and trust with clients and partners), teamwork (shared goals, mission, and purpose), loyalty (allegiance to our client and team), and importance of others (work and win as a team). SimIS is currently recruiting for the listed position. Job Description: NATO HQ Supreme Allied Command Transformation (NATO SACT) is seeking contract support to access to leading-edge capabilities necessary to adapt to future threats, integrate advanced technologies to modernize the force, explore long-term military strategy to shape how NATO's forces will operate in the future, and promote interoperability between current and next-generation platforms. To support our NATO customer, SimIS seeks a DevSecOps Engineer to integrate security into every phase of the software development lifecycle, focusing on automation, collaboration, and continuous improvement to deliver secure and compliant software. Education and Qualifications • BS degree in Computer Science or related discipline., • 7 years’ experience as a DevSecOps Engineer., • Experience in implementing scalable cloud-based environments, service- oriented architectures, and microservices., • Experience with tools like Jenkins, Ansible, and understanding of CI/CD principles., • Proficiency with Docker and Kubernetes., • Strong skills in languages such as Python and Bash., • Experience using Static Application Security Testing (SAST) and Dynamic Application Security Testing (DAST)., • Experience with Infrastructure as Code and infrastructure testing strategies., • Security+ or CISSP certification required. Responsibilities, • Embed security practices and policies into the entire DevOps process, from planning and coding to deployment and monitoring., • Implement and maintain automated tools and scripts to perform security audits, vulnerability scanning, and other security tasks., • Work closely with development and operations teams to ensure security is a shared responsibility and to foster a culture of security awareness., • Continuously monitor systems for security vulnerabilities and proactively mitigate risks and potential breaches., • Verify that software and infrastructure meet relevant industry regulations and compliance standards (e.g., GDPR, ISO 27001).Benefits:, • Medical, Dental, and Vision, • Short-Term Disability (at no cost to you) & Long-Term Disability, • Life Insurance, • 401(k) Savings Plan, • Flex Spending Accounts, • Tuition Assistance Program, • Professional Development, • Paid Time Off (PTO), • 11 Federal Holidays each year SimIS, Inc. is an EOE / M / F / Disability / VET / Drug Free Employer Powered by JazzHR RaVAKDKs2E

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for "the best at what they do" to join our team and help us grow. Attention to detail and a willingness to learn is essential as you will be fully engaged from the first day. We offer competitive wages in salaried and hourly positions, educational opportunities, relocation reimbursement, competitive employee benefit options, and a 401(k)-retirement plan with company match. We are always looking for top-talent and we look forward to new-thinkers and team-players joining our company! *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Job Description: Continental Tide is seeking a motivated, energetic, and experienced Engineering Technician with a strong electrical background and AIT leadership experience to join our ship modernization and sustainment teams in Norfolk, VA. The ideal candidate is a hands-on technical leader with expertise in U.S. Navy Hull, Mechanical & Electrical (HM&E) or Electronic Systems, capable of driving immediate results in shipboard upgrades, repairs, and system installations. Based on the initiative, the successful candidate may operate as a Project Lead and/or Electrical Subject Matter Expert (SME), the candidate will oversee shipboard electrical installations, lead technical teams, and serve as a key interface with Continental Tide's Program Managers, customers, and subcontractors. This position demands a blend of field experience, leadership capability, and deep technical understanding of Navy electrical systems. Essential duties & responsibilities include, but are not limited to the following: • Serve as the electrical SME and project lead for hull and steel repair projects, managing day-to-day operations onboard ships and in shipyard environments., • Lead electrical teams in cableway management (including lay out of cable paths and penetration requirements), cable installation, terminations, copper/ fiber connectorizations and testing requirements., • Interpret NAVSEA drawings, blueprints, and technical specifications to plan and execute electrical work packages in compliance with 9090-310 REV H or latest version., • Supervise and mentor junior, senior electricians, and helpers to ensure quality craftsmanship and safe work practices., • Collaborate with Project Leads, Program Managers, Engineers, QA &QC, and customer representatives to resolve issues and align project goals., • Assist in tracking and report daily progress, labor hours, and material usage; assist in scheduling and forecasting work., • Ensure all electrical work adheres to NAVSEA Standard Items, ABS requirements, OSHA regulations, and company policies., • Adhere to, maintain, and update all QA documentation OQE to include but not limited to preinstallation inspections, post installation inspections to include repair and testing., • Identify and mitigate project risks, support change orders, and contribute to after-action reporting., • As required perform duties and responsibilities as Site Foremen as a project lead for overall task assignment., • Submit Daily Status Reports (DSR), develop Condition Found Reports, and update progress utilizing Microsoft Project in POA&M (plans of action & milestone) format. Required Qualifications: • Target experience of ten (10) years of direct hands-on experience working with shipboard Navy HM&E or electronic systems., • Five (5) to Seven (7) years previous experience overseeing and directing 'Project-Level' initiatives within corporate or Program-level initiatives and directives., • Experience in directing daily production to attain schedule milestones., • Must be Copper Connector Certified & possess fiber optic experience, • Possess NAVSEA Cableway Inspector, Fiber and Copper Connectorization Certifications., • Proven ability to supervise technical support teams of 5 to 10 tradespersons performing electrical repairs and installations aboard Navy ships., • Demonstrated knowledge of Navy Alteration Installation Team (AIT) processes, shipboard safety procedures, and electrical system testing., • Ability to interpret NAVSEA drawings, electrical schematics, and installation standards., • Familiarity with QA practices and the generation of OQE (Objective Quality Evidence) & QAWB documentation., • Must possess or be able to obtain a Secret Security Clearance., • Possess a high school diploma, GED or industrial school certificate., • Certified in 'Multi-pin' Connectors IAW MIL-STD-2003-5B, • Certified in Fiber Optic IAW 2042C: CFOS/O, CFOS/C, CFOS/S, CFOS/T, CFOS/FC, • Minimum of seven (7) years' experience as a Marine Electrician with 3 or more years of previous supervisory responsibilities*, • Experience with maintaining budgets and material, • Certified to accomplish wire way inspections in accordance with NAVSEA Standard Items, • Experience utilizing Microsoft Office, • Ability to foresee problems, write reports and give suggestions for solving those issues., • Experience communicating directly with management, subcontractors, and customers regarding project cost, staffing, and scheduling., • Exposure to open-air environments, including noisy, hot, and cold conditions., • Required to visit project sites aboard ships and rigs, both onshore and offshore., • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required., • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components., • Exposure to sound levels exceeding 100 decibels., • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment., • May work in confined spaces with limited ventilation., • Requires prolonged periods of sedentary work, including sitting and/or standing., • May be required to operate machinery, power tools, and/or heavy equipment., • Must be able to communicate effectively to exchange and comprehend information., • Frequent exposure to extreme weather conditions, including high heat and extreme cold., • Must be able to lift and carry 30 lbs. or more, depending on the task requirements. Benefits: Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Apply Today: If you’re ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at . Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran”. “This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans.”

Job DescriptionBuilding Automation Project EngineerPosition summary We’re hiring a detail-oriented Building Automation Project Engineer to convert sales estimates, contract drawings, and specifications into complete submittal packages and constructible designs. You’ll develop control sequences, single-line diagrams, instrument and I/O schedules, bills of material, and valve/damper selections according to company standards and industry best practices. You’ll support project intake and turnover with Sales and coordinate design progress and handoffs with Project Management — delivering accurate as-built documentation at closeout and staying current on controls technology and trends. Key responsibilities • Produce full submittal packages from sales estimates, contract drawings and specifications, including control narratives, diagrams, and device selections., • Ensure designs comply with contract requirements, project specs, applicable codes, and company standards., • Participate in project intake/turnover meetings with Sales to verify scope and clarifications., • Lead or facilitate design progress meetings and turnovers with Project Management, commissioning, procurement, and field teams., • Coordinate with mechanical, electrical, and controls engineers/contractors to integrate BAS into the overall building systems., • Generate clear deliverables for procurement, installation, commissioning, and as-built documentation., • Support commissioning activities by providing sequences, point lists, and functional test procedures., • Maintain and update standard templates, sequences library, and selection guidelines., • Keep current on BAS hardware/software trends and cybersecurity best practices., • Provide technical support to sales, project managers, service, and field teams., • Identify scope gaps, risks, and potential change-order opportunities., • Contribute to continuous improvement initiatives for the engineering and submittal workflows.Qualifications (bold required):, • Bachelor’s degree in Mechanical/Electrical Engineering, Controls Engineering, or equivalent technical degree, or 4+ years relevant BAS experience., • 3–7 years experience developing building automation/control submittals and shop drawings., • Experience with sequences of operation, point lists/I/O, and BOM creation., • Knowledge of HVAC equipment controls and field devices (VAV, AHU, chiller, etc.)., • Proficiency with Vision and AutoCAD to produce or review control drawings., • Experience with BAS platforms/protocols (Tridium Niagara, BACnet, Modbus, etc.)., • Strong written and verbal communication skills., • Detail-oriented, organized, and able to manage multiple projects concurrently., • Proficient with Microsoft Office; familiarity with project management tools preferred.Qualifications — preferred, • NICET or other HVAC/control certifications; commissioning credentials a plus., • Manufacturer product training or certification (Tridium, Honeywell, etc.)., • Knowledge of HVAC piping and hydronic calculations for valve sizing., • Understanding of BAS networking and cybersecurity best practices., • Experience in a contractor or systems integrator environment.Skills and competencies, • Technical: Control logic development, wiring schematics, device selection, valve/damper sizing, BOM management., • Interpersonal: Collaborative, able to lead cross-functional meetings., • Project: Time management, prioritization, documenting design decisions., • Analytical: Troubleshoot sequence issues and reconcile field conditions., • Continuous learning: Keeps up with BAS hardware/software and standards.Typical outcomes / success metrics, • Submittal packages completed on schedule and allotted time with minimal internal RFIs., • Reduced design-related change orders by identifying scope gaps early., • Timely turnover packages delivered to PMs and commissioning teams. PHYSICAL DEMANDS: The physical demands described here are representative of those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is frequently required to stand and walk. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. This position requires working at construction sites, in mechanical/equipment rooms, and in possible extreme weather conditions. While performing the duties of this job, the employee may be exposed to moving mechanical parts and heavy equipment. The employee may be exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; risk of electrical shock (high voltage); and vibration. The noise level in the work environment varies. DECLARATION: Human Resources retains the sole right and discretion to make changes to this job description. Any employee making changes unauthorized by the Vice President or Human Resources will be subject to disciplinary action up to and including termination.

Job Description BB&E is seeking a dynamic and detail-oriented Geotechnical Engineer to join our team, supporting facilities design and construction projects for NAVFAC Mid-Atlantic at Norfolk Naval Station, VA. Job Duties & Responsibilities • Provide independent, timely and professional specialized geotechnical engineering support, services and consultation for the planning, design, construction, and maintenance of facilities for the Navy, Marine Corps, and other Supported Commands, including minor works projects, specific projects, special projects, military construction (MILCON), demolition, maintenance, space utilization and facilities development, • Participate in conferences with project stakeholders and collaborates with other engineering and architectural disciplines to ensure system coordination and integration with specific project requirements, • Responsible for coordinating all activities in the specialized area of geotechnical and pavements engineering, in accordance with related UFC Criteria, • Support the design of In-House projects and Request for Proposal (RFPs) as a team member for complex projects. Review designs (i.e., specs, drawings, and costs) and RFPs prepared by consultant Architects-Engineers (AEs), • Knowledgeable in the development of final working drawings utilizing current AutoCAD technology. Monitors construction, ensuring the geotechnical aspects of the project are in accordance with the contract plans and specifications, • Review contractor submittals of shop drawings, samples of materials and other design-related items, • Confer with the construction contractor and designer (if A/E work) to resolve problems or latent conditions that may arise after construction, • Make recommendations for corrective/preventative measures, as appropriate, • Ensure that changes in costs, quantity, scope, schedules, design, or any other terms and conditions of the contract are coordinated or approved, as appropriate., • Due to the varied design and construction techniques, geotechnical criteria, seismic activity, climatic conditions, coordination and code requirements design techniques, cost estimating and communications are very complex, • Analyze data and uses geotechnical experience to determine and predict specially developed foundation shear strength and settlement potential for various materials encountered, • Determine testing parameters for soil conditions to design structural foundations, • Initiate field trips to project sites to evaluate scoping, design, and construction, • Inspect existing conditions of soils and foundations to ascertain possible problems and recommend corrective measures, • U.S. Citizenship and the ability to obtain/maintain a NACI/CAC is required, • Certifications: Registration as a Professional Engineer in geotechnical or civil/structural with emphasis in geotechnical engineering is required, • Strong Communication Skills: Excellent verbal and written communication skills, with the ability to effectively convey complex technical concepts to diverse audiences, • Software: Proficiency using MS Office software including Excel, Word, and PowerPoint, • Experience: A minimum of 10 years of professional Geotechnical engineering code compliant facilities design experience for new construction, including renovation design experience, is required, • Ability to stand/walk/climb/kneel/crouch and remain in a stationary position/sit at least 60% of the time, • Ability to operate office equipment, including computer, copy machine, phone, etc., • Ability to use hands to finger, handle or feel objects or controls; reach with hands and arms, • Capable of lifting up to 10 lbs., • Ability to see details of objects that are less than a few feet away, • Compensation, Benefits & Perks, • Competitive compensation packages, • Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned!, • Discretionary bonus, • *Medical, Dental, and Vision Insurance with health care concierge, • *Employer provided Short-Term & Long-Term disability, • *Employer provided Life insurance, • *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits, • *Generous PTO plus 11 paid holidays, • Traditional & Roth 401(k) options with fully vested employer match, • Tuition reimbursement & professional development, • Employee referral program, • Financial wellness resources, • Employee discounts, • Employee Assistance Program (EAP) *BB&E is an Equal Opportunity Employer and an Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionSalary: WHY ULLIMAN SCHUTTE? We are Building a Better Environment! We're looking for passionate Project Engineers in the Chesapeake, VA area who are eager to learn, grow, and contribute to building something meaningful! At our core, Ulliman Schutte is a group of extraordinary individuals. We recognize that our continued success is a direct result of the expertise, enthusiasm, and commitment of our employees.In addition to long-term stability Ulliman Schutte provides a comprehensive compensation plan and a generous benefits package. QUALIFICATIONS • BS in Civil, Mechanical, Environmental, Construction Engineering or related field from an accredited university in the United States., • Experience working successfully on teams., • Excellent verbal and written communication skills., • Planning and execution of day-to-day project operations. Like to be outside and not stuck behind a desk all day? You'll be based on exciting and fast-paced construction jobsites with a great combination of indoor and outdoor work environment., • Purchase, procure, and manage Vendor materials and Subcontractor work packages. Want responsibility? Our projects often include state of the art water treatment equipment and construction techniques worth millions of dollars., • Manage and maintain positive relationships with other engineers, managers, trades professionals, subcontractors and vendors. Like working with people? We work with a wide variety of individuals from all different backgrounds and perspectives - and it's great!, • Learn, grow, and be mentored by the industry's best and brightest. Want advancement potential? The majority of our full time engineers and managers started with US through our co-op and internship program, so a culture of training your teammates is an integral part of who we are and what we do. We are always vested in the success of our teammates and future leaders., • Ulliman Schutte is an industry leader because of our people. Are you a team player? Our teams work cohesively with a "get it done" attitude - and we have fun while doing it. LIFE WITH US At Ulliman Schutte, were an industry leader because of our people. We foster a work environment that emphasizes lasting relationships, encourages personal growth, and rewards hard work. Our team is driven by a sense of urgency, a commitment to quality, and a shared responsibility to manage risks and keep everyone safe. Above all, we aim to add value in everything we do. The individuals who thrive in our organization have a unique combination of ambition, intelligence, and a sense of adventure. They enjoy the hands-on nature of civil and mechanical engineering and construction and are energized by problem-solving in a fast-paced, team-oriented environment. Our future leaders embrace the opportunity to relocate, building new relationships and gaining valuable experiences along the way. At Ulliman Schutte, were not just about asking our people to "work safe" we build a proactive safety culture that strives to eliminate risk in every aspect of our operations. The results speak for themselves: Our safety record is outstanding, with incident rates well below national averages. Ulliman Schutte is a drug-free working environment. All offers are contingent upon compliance with Ulliman Schuttes pre-employment drug screening policies and E-Verify eligibility confirmation. We are proud to be an Equal Opportunity Employer who does not discriminate on the basis of race, color, sex, gender identity, sexual orientation, religion, national origin. EOE/AA M/F/VET/Disability

Job DescriptionSalary: Field Engineer Norfolk, VA Who we are: Altagrove delivers smart and innovative technology solutions that create competitive advantages for our customers and their missions. Our focus areas include Space, Connectivity, Cyber, Cloud, Analytics, and Solution Integration. As we continue to grow, Altagrove is actively recruiting for Field Engineers to join our energetic and entrepreneurial team that is executing on a variety of projects that are technology oriented. A successful candidate will bring a core area of expertise and a passion for learning and implementing new ideas in a start-up environment. Follow us at - What you will do: • Assist with installation, inspection, and maintenance of maritime networking and communication equipment., • Work aboard ships and in shipyard environments, ensuring all work is completed efficiently, safely, and to specification., • Troubleshoot and support hardware and connectivity issues under the guidance of network engineers and senior technicians., • Collaborate closely with project teams to complete assignments on time and within scope., • Maintain tools, equipment, and workspaces in an organized, ready-to-use state., • Conduct tasks in accordance with safety protocols, even in challenging or physically demanding environments., • Gain hands-on exposure to cutting-edge maritime technology solutions., • Travel extensively - domestically and internationally - to shipyards, ports, and customer sites, often for extended periods. This includes offshore assignments and work in diverse, high-tempo operational settings., • Get the opportunity to travel and work in dynamic environments., • Gain hands-on experience in the maritime technology industry., • Be part of a supportive and high-energy team. What you will bring: • Strong work ethic and a genuine willingness to learn., • Ability to adapt quickly and stay productive in fast-paced, ever-changing environments., • Comfort with hands-on, physical work aboard ships and in shipyard conditions., • Excellent problem-solving skills and a collaborative mindset., • Readiness and ability to travel extensively, including internationally and offshore, for extended durations., • Experience in maritime, construction, or fieldwork environments is a plus, but not necessarily required., • Strong organizational skills and attention to detail., • Ability to handle a variety of tasks - big and small - with professionalism., • Must have an active DoD security clearance.

Job DescriptionDescription: EHS Technologies is a cutting-edge IT, Cyber Security and Engineering Firm dedicated to solving the Department of Defense’s most challenging problems. Join EHS Technologies to make a difference while being a part of a skilled, knowledgeable and mission driven team. As a team member of EHS Technologies, you’ll have available benefits including Bonus Eligibility, No Cost Full Coverage Health Insurance, available Pet Insurance, industry high 401k matching among many other excellent benefits and up to 26 days of holiday and PTO Job Description: Provides field support, on-site support, maintenance, installation, and troubleshooting efforts to keep systems operational. The work will be to assist the ISEA in DDG modification and INCO support involving the AN/USQ-82(V) FODMS and GEDMS systems in CONUS, and assist with FMS ship checks/modifications/INCO in Australia, Japan, and Korea. Ideal candidate would be a USN IT/IC off a DDG that worked on the AN/USQ-82(V) system and is willing to travel internationally about 25% to 50% of the time. Length of travel for FMS support ranges from 10 days (common) to 45 days (uncommon). Preferred locations are San Diego and Norfolk (locations of GEDMS ISEA west and east coast activities). Requirements: High school/vocational school degree or GED certificate and four (4) years’ experience in the operation, maintenance and testing of U.S. Navy interior communications systems, networks and/or network user systems.

Job Description Overview: CEC Controls is currently seeking a Controls Engineer to join our team in the Chesapeake, VA office. The Controls Engineers are given the opportunity to work on projects from the initial planning stages to field installation and commissioning for the Water-Wastewater and Manufacturing Industry. Demonstrated trouble shooting skills are necessary. This is an ideal opportunity for an individual with solid experience as a systems integrator, who is looking for career growth with a major organization. Responsibilities: • Design automation control systems from customer specifications., • Responsible for programming automation and control systems involving PLCs and HMI’s., • Specify electrical equipment and materials including PLCs, automation control components and instrumentation based on calculations, customer specifications, and engineering principles., • Develop electrical and P&ID drawings., • Troubleshoot hardware and software issues., • Design and debug Data Acquisition systems (SCADA)., • Power-up, Debug, and Calibration of Water/Wastewater, automotive and/or manufacturing Control Systems., • Follow all company processes, check lists, and support the development of standardized design platforms. Skills / Qualifications: Electrical engineering degree with 1-2 years’ experience or 2-5 years equivalent experience in Automation Programming of PLC's. • 2+ years of PLC and HMI/SCADA programming experience. • Proficient in programming PLC's; (Rockwell, Siemens, GE, Modicon, Emerson Control Wave, etc.), • Proficient in programming HMI/SCADA systems; (FactoryTalk, Maple, VTSCADA, Wonderware, Ignition, etc.), • Industrial electrical hands-on experience and troubleshooting, including 480VAC 3-phase, 120 VAC, 24VDC systems, and VFD’s., • Experience identifying, maintaining, troubleshooting, and modifying automation controls including motor starters, Variable Frequency Drives, and standard electrical components., • Experience with process control instrumentation; flow meters, pressure transmitters, & level transmitters a plus., • Exceptional problem-solving skills, using a logical and systematic approach. • Has a working knowledge of industry standards and regulations (NEC, IEEE, NFPA, & OSHA, etc), • Ability to read, revise and create new PLC logic, HMI/SCADA programs, and VFD parameters., • Attention to detail to maintain accurate drawings, files, bill of materials, correct spare parts and equipment specifications., • Travel up to 25%. The current project workload requires less., • Authorization to work lawfully in the US without sponsorship from CEC Controls is required. Physical Requirements: • Able to climb a 2-story ladder., • Can walk a mile in 20 minutes., • Be able to cover, on foot, a reasonable distance on a job site., • Able to lift 30 lbs. without difficulty

Job Description Koontz Bryant Johnson Williams (KBJW) is seeking a Geostructural Engineer to join our growing team in Chesapeake, VA. KBJW is a fun, family-oriented business, dedicated to the success of our employees, clients, and our communities. For more than 30 years, we have served as a leading engineering firm and have consistently been recognized as a Top Workplace. KBJW offers interesting projects, a friendly atmosphere, professional development, and a competitive benefits package. We are looking for employees who work hard, enjoy solving problems and want to help us grow. If you're looking for a workplace that values your growth, your well-being, and your contributions, KBJW is a place where you can thrive professionally and personally. Position Summary: The Geostructural Engineer's primary function is to perform analysis and prepare technical reports related to the design and design review of various geotechnical, foundation, and other structural components of a construction or repair project. This may be performed on projects including but not limited to residential, commercial and industrial properties, excavation support systems, foundation systems, and ground improvement. Job Responsibilities: • Perform engineering analysis and calculations, and assist CAD technicians with preparation of drawings related to geotechnical design work including but not limited to foundation repair components, footings, jacks, piers, beams, posts, connections, etc., • Review data, drawings, sketches, calculations, and product information provided by other engineers or clients in the preparation of engineering reports., • Occasionally observe field explorations and/or construction activities., • Occasionally observe construction of geotechnical and geostructural items such as deep and shallow foundations, tiebacks, beams, posts, walls, etc., • Attend project meetings and communicate with clients., • Prepare technical letters and reports., • Work closely with senior engineering staff to address comments and prepare final reporting., • Train with fellow engineering staff and senior engineers., • Work collaboratively with CAD and Administrative staff., • Occasionally assist with development of proposals and participate in other business development activities as requested., • Interact with clients, other consultants, and state/local regulators, • Work closely with Manager and Director to complete projects within schedule, • Adhere to company safety policies and use of supplied personal protective equipment, • Travel to Firm's other offices, client offices, labs, and project sites if needed., • B.S. in Civil Engineering with a focus on Geotechnical, Structural, or Civil Engineering is required., • EIT Preferred, • 1 or more years of experience., • Proficiently use CAD, Excel, Bluebeam, and Word., • Able to work in a team environment and to consistently meet deadlines., • Proficient verbal and written communication skills required with ability to improve if needed., • Able to travel on temporary assignments if needed., • Able to perform field work on active construction sites without restrictions, and in inclement weather if required., • May require the ability to sit for long periods of time, stand, walk and manipulate (carry, lift, move) light to medium weights of 25-50 pounds., • Ability to walk construction sites, • Requires good hand-eye coordination, good eyesight, arm, hand, and finger dexterity, including the ability to grasp, and visual acuity to use a keyboard, operate technical equipment, read technical information and to analyze complex data., • Occasional travel to offsite locations to perform work and work- related errands or to attend meetings may be required., • May need to be on project sites for extended periods of time., • Must have valid license to operate a motor vehicle., • Attend meetings and interviews Why KBJW? KBJW employees receive competitive compensation as well as the following benefits: • Comprehensive group medical insurance includes health, dental, vision and life., • Paid vacation and sick time, • Short and long-term disability coverage, • 401K retirement, • Meaningful work that contributes to environmental protection and sustainability., • Collaborative and inclusive team culture., • Opportunities for professional development and career growth. Reasonable accommodations will be made for persons with disabilities as defined by the ADA. Employment is contingent on receiving a favorable background screening.

Job DescriptionONSITE Who We Are: Founded in 2007, SimIS Inc. is an innovative information technology solution Veteran Owned Small Business (VOSB) that models future environments, requirements, and capabilities, and then secures the enterprise from internal and external threats compliant with Federal, State, and industry standard governance to ensure client mission success. Our performance standard is “excellence,” with an outcomes-based, quality focus in our services and products, guided by our core values of honesty (in word and deed), relationships (confidence and trust with clients and partners), teamwork (shared goals, mission, and purpose), loyalty (allegiance to our client and team), and importance of others (work and win as a team). SimIS is currently recruiting for the listed position and is contingent upon award. Job Description: NATO HQ Supreme Allied Command Transformation (NATO SACT) is seeking contract support for the capture, development, architecture, data science and quality assurance of capability requirements and operational analysis necessary to adapt to future threats and explore long-term military strategy to shape how NATO's forces will operate in the future. To support our NATO customer, SimIS seeks an Enterprise Architect to utilize enterprise architecture tools and processes to design and guide the development of complex, integrated IT systems and infrastructure to meet NATO capability portfolio objectives and support NATO force design and strategic decision making. Qualifications: • BS degree in computer science, information systems, engineering, or a related field., • Possess a current Enterprise Architecture certification., • 7 years of experience developing enterprise architecture using industry-standard frameworks such as Department of Defense Architecture Framework (DoDAF), Open Group Architecture Framework (TOGAF), Federal Enterprise Architecture Framework (FEAF), and Unified Architecture Framework (UAF)., • Three (3) years of experience working on enterprise architecture development and maintenance efforts supporting IT infrastructure and capability portfolio rationalization., • Expertise in EA tools such as Archi, SparxEA and business process modeling tools like Lucidchart, Microsoft Visio, Bizagi, and Signavio., • Experience in cross domain analysis to reduce data redundancy, improve data availability, and accessibility, and reuse.Responsibilities:, • Lead high-level analysis, design, integration, and documentation of future-state architectures, process models, and information flow diagrams., • Utilize and develop enterprise architecture frameworks, such as the Department of Defense Architecture Framework (DoDAF), to model and govern the architecture of systems and processes., • Design and deploy IT systems, applications, and infrastructure (including containerized applications) to meet defense requirements across various networks., • Implement and manage robust security measures, including identity and access control, credential management systems, and secure cross-domain solutions., • Engage with various stakeholders, from technical teams to leadership, to understand requirements, communicate the architecture vision, and gain buy-in for strategic initiatives., • Identify and mitigate risks, ensure compliance with established architecture standards and regulations, and manage third-party risks. The candidate performs the following specific assignment. Benefits:, • Medical, Dental, and Vision, • Short-Term Disability (at no cost to you) & Long-Term Disability, • Life Insurance, • 401(k) Savings Plan, • Flex Spending Accounts, • Tuition Assistance Program, • Professional Development, • Paid Time Off (PTO), • 11 Federal Holidays each year SimIS, Inc. is an EOE / M / F / Disability / VET / Drug Free Employer Powered by JazzHR O6UBWOWH7M

Job Description Job Title: Entry Level Mechanical Engineer Job Description: We are seeking an entry-level Mechanical Engineer to join our team as the first engineer on board. This position offers the unique opportunity to work directly under the Chief Technology Officer/Chief Engineer, contributing to the development of new products and playing a key role in building out our engineering department. Responsibilities • Collaborate with the Chief Technology Officer/Chief Engineer to develop new products., • Assist in building and expanding the engineering department., • Utilize AutoCAD and other design software for mechanical design tasks., • Proficiency in mechanical engineering principles., • Experience with mechanical design and AutoCAD., • Internships or hands-on experience in a related field are preferred., • This position is on-site with a schedule of Monday to Friday, from 8 AM to 5 PM. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portsmouth,VA. Application Deadline This position is anticipated to close on Jan 12, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

A company is looking for a Full Stack Engineer.Key Responsibilities Design, develop, and maintain custom applications and third-party product integrations Provide Tier 3 support for custom applications and gather/analyze requirements Document components and applications, and provide weekly statu

Job Description Copper River Technologies is seeking an experienced Construction Engineering Technician to support quality assurance, safety management, and technical coordination on complex construction projects administered by the Naval Facilities Engineering Systems Command (NAVFAC) and the U.S. Army Corps of Engineers (USACE) at JEBLC, Virginia. This role requires hands-on oversight at active construction sites to ensure compliance with contract requirements, safety regulations, and quality standards. The ideal candidate will be detail-oriented, proactive, and adept at collaborating with government clients, contractors, and subcontractors. Responsibilities (include but are not limited to): • Ensure contractor compliance with approved Quality Control Plans, including participation in the three-phase inspection process., • Conduct site inspections, witness system tests, and support commissioning of critical systems (HVAC, electrical, fire/life safety, etc.)., • Verify materials for compliance, condition, and approval for payment., • Manage field documentation including daily reports, quality records, and progress photos., • Support closeout activities, including review of as-builts, warranties, and O&M manuals., • Review and support safety planning documents (Accident Hazard Analyses, Accident Prevention Plans)., • Observe and document critical lifts, ensuring compliance with NAVFAC P-307 crane safety requirements., • Perform periodic safety assessments, ensure postings are in place, and support mishap investigations., • Coordinate permits, utility outages, and site access in support of ongoing construction activities., • Review submittals, RFIs, baseline schedules, and provide technical input to the project team., • Assist with punch list development, acceptance inspections, and commissioning., • Provide support to the Contracting Officer and Construction Manager with invoice reviews, contract modifications, and related documentation., • Clearance:, • Public Trust clearance required., • Experience:, • 5+ years as a Quality Control Manager on NAVFAC or USACE projects, OR 10+ years of trade foreman experience (concrete, mechanical, electrical, masonry, or carpentry) on commercial, industrial, or military projects (residential experience does not qualify)., • Certification:, • Certificate of completion for Construction Quality Management (CQM) for Contractors from NAVFAC/USACE, or ability to complete within 60 days of hire., • Valid OSHA 30-Hour Construction Safety card, or ability to obtain within 30 days of hire., • Ability to pass an open-book exam on the EM 385-1-1 Safety and Health Requirements Manual within 15 days of onboarding., • Preferred Qualifications, • Experience working with NAVFAC/USACE clients and federal acquisition processes., • Knowledge of construction scheduling, safety enforcement, and quality control., • Proficiency with reporting/project systems (RMS/QCS, ieFacman, MS Project)., • Travel:, • Willingness to travel as required to job sites and project locations. About Copper River & The Native Village of Eyak: Owned by the Native Village of Eyak (NVE), a federally recognized Alaska Native Tribe, the Copper River Family of Companies are a collection of entities that deliver a complementary set of solutions and services to support the diverse missions and requirements of our clients. Proud participants of the Small Business Administration's (SBA) 8(a) Business Development Program since 2006, our companies consist of both current and graduation SBA 8(a) entities. It is our collective purpose to support the Tribe and diversify the NVE's ability to facilitate economic advancement. The income generated from our companies helps the Native Village of Eyak fund health and social services, economic development, natural resource/environmental education, jobs, job training, and other benefits to the NVE in a manner that is consistent with Alaskan Native cultural values and traditions. Copper River's Culture The Copper River Family of Companies has a positive, supportive, and thriving culture. At the foundation of our culture is a focus on collaboration. No matter your role or which operating company you work for, we are ONE TEAM working toward the same goals for our customers and for our collective owner- The Native Village of Eyak. How we treat each other is just as important as the work we deliver. Benefits • Comprehensive medical, dental, and vision coverage, • Flexible Spending Account - healthcare and dependent care, • Health Savings Account - high deductible medical plan, • Retirement 401(k) with employer match, • Open leave policy and paid holidays Disclaimer: The Copper River Family of Companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Perform system hardening on multiple Operating System (OS) platforms Monitor and assess system and network security posture in accordance with DoD cybersecurity policies and tools Apply MITRE ATT&CK and/or MITRE D3FEND frameworks to assess and improve threat detection and response strategies Conduct

Key Responsibilities · Help to identify and implement process improvements for our DCs to assist in driving customer value, reduce cost per case and increased cases per hour throughput within the network · Develop and implement standard operating procedures (SOPs), work instructions, and best practices across DC network. · Partner with all business partners to help support key initiatives as well as projects · Collaborate with the team and help to drive data driven informed decision making · Provide insight into re-profiling/slotting DCs to best suit productivity needs to increase CPH and decrease CPC · Identify, lead, and support continuous improvement projects aligned with business goals using Lean, Six Sigma, and other OpEx methodologies. · Conduct value stream mapping, root cause analysis, and other problem-solving activities to drive process improvements. · Analyze key performance indicators (KPIs) and use data to identify trends, inefficiencies, and opportunities for improvement. · Facilitate Kaizen events, workshops, and training sessions to build OpEx capabilities across the organization. · Collaborate with cross-functional teams including production, quality, supply chain, and engineering. · Monitor and report on project outcomes, savings, and ROI to stakeholders. · Support a culture of continuous improvement and operational excellence at all levels of the organization. · Travel 50% or more depending on projects and business needs Qualifications: · Bachelor’s degree in engineering, Industrial Engineering, Operations Management, or related field. · 2–5 years of experience in a continuous improvement, manufacturing engineering, or operational excellence role. · Working knowledge of Lean, Six Sigma (Green Belt or Black Belt preferred). · Strong analytical, problem-solving, and project management skills. · Proficiency in process mapping, statistical analysis, and improvement tools (e.g., DMAIC, PDCA). · Excellent communication and facilitation skills. · Proficient in Microsoft Office and relevant data analysis software (e.g., Minitab, Power BI, Excel). · Working knowledge of Warehouse Management systems (WMS) Preferred Qualifications: · Six Sigma Green Belt or Black Belt Certification · Experience in retail supply chain · Familiarity with Catalyst (WMS) or other WMS systems and digital transformation initiatives · Experience with change management and training development

📌 Structural Steel Superintendent 📍 Norfolk, Virginia 💰 Compensation: $120k–160k 🚀 Why This Role Matters This position is central to leading multiple commercial and industrial structural steel projects across the Mid-Atlantic. By driving safety, quality, and scheduling standards, you’ll ensure site teams are aligned, efficient, and delivering at scale. 🎯 Key Responsibilities • Lead and supervise 3–5 structural steel projects simultaneously, • Oversee site health, safety, quality, and scheduling compliance, • Act as the main communication link between foremen, project teams, and leadership, • Review drawings, specifications, and materials for accuracy and execution, • Coordinate deliveries and collaborate with other trades to keep projects on track, • Troubleshoot site issues, manage RFIs, and oversee as-builts ✅ Ideal Candidate Profile • 5–10+ years of experience in steel erection or construction supervision, • Proven background as a superintendent in commercial/industrial projects, • Strong leadership and communication skills with experience leading multiple sites, • Knowledge of structural steel, commercial construction, and site equipment (transits, laser levels, etc.), • Proactive, safety-first mindset with strong problem-solving ability, • Growth-oriented and able to adapt to fast-moving project pipelines Submit resume to or apply online.

SimVentions, consistently voted one Virginia's Best Places to Work, is looking for an experienced cybersecurity professional to join our team! As a Cybersecurity Engineer III, you will play a key role in advancing cybersecurity operations by performing in-depth system hardening, vulnerability assess

A combined total of ten (10) years of full-time professional experience in all of the following skillsets/disciplines: Network Security to include the design, implementation, configuration, and enforcement of security controls on network, hardware, and software components and devices STIG implementa

SimVentions, consistently voted one Virginia's Best Places to Work, is looking for an experienced professional to join our team! As a Blue Team Engineer, you will support Blue Team operations and collaborate with Red Team and Cybersecurity professionals on overall cyber readiness defense and system

In-depth understanding of computer security, military system specifications, and DoD cybersecurity policies Strong ability to communicate clearly and succinctly in written and oral presentations Responsibilities:. Perform system hardening on multiple Operating System (OS) platforms Monitor and asses

Docker, IBM WebSphere Hybrid Edition, Oracle Cloud Infrastructure) Repository management experience with Git, Mercurial Software configuration management of tracking bug/enhancements in software releases Installs enhancements and performs updates to software of existing systems, including middleware

Manage construction planning and change orders effectively. Support and participate in construction administration including coordination with field personnel, issue resolution, inspections, testing, and calculations. Field inspection and construction administration familiarity.

Construction, Design Services, and Architecture and Planning.

Under the direction of the Chief Engineering and Facilities Officer, the Project Manager is a professional level position typically responsible for planning, executing, monitoring, controlling, and closing out of projects.The projects may include construction.Project areas may include capital projec

This role will serve as a key contributor on project teams, delivering world-class civil and structural designs for new construction, modifications, and redevelopment projects.

Norfolk, Virginia is America's most authentic and urban waterfront city.Home to the world's largest naval station and the business, arts, and cultural center of Coastal Virginia, Norfolk has been rated a top place to live, work, play, and raise a family by numerous publications.Working for the City

The Customer Service Engineer - is an intermediate position that performs tasks related to the repair of a variety of technology-based products typically associated in an end-user computing environment.

Experience and familiarity with the Navy accrediting authorities and requirements. SimVentions is 100% employee-owned and has consistently been voted one of Virginia's Best Places to Work! We are looking for a Cybersecurity Analyst/Engineer to join our team to perform cybersecurity services across t

The successful candidate will need a Bachelor's degree in Civil Engineering and proficiency in various design tools.

Hiring Associate AEC Design Individuals to support a large Utility Customer with design and engineering drawings using AutoCAD.

Moffatt & Nichol's professional staff includes engineers, planners, scientists and architects who serve our global client base from offices in Europe, North America, Latin America, and the Pacific Rim.

Education: Completion of a course of studies accredited by the Accreditation Board for Engineers and Technology (ABET) for a Civil/Structural with emphasis in geotechnical engineering program from a college or university earning a Bachelor's or Master's degree, supplemented by a considerable amount

Join CACI as the prime contractor on a growing program supporting NAVSEA 03D3 Digital Program Office as a Senior Cyber Security Architect supporting the Navy Maintenance and Modernization Enterprise Solution (NMMES), a mission-critical program that supports over 45,000 users executing naval ship and

Job Description Akira Technologies is seeking a skilled and experienced Network Operations Engineer to join our Network Operations Center (NOC) team. The ideal candidate will be responsible for managing and maintaining the enterprise network infrastructure for a DoD client, with a focus on Cisco SD-WAN and Palo Alto firewalls, ensuring high availability, performance, and security. This role requires a Familiarity with security frameworks and industry standards like NIST SP 800-82 Rev. A, ISO/IEC 27001, CIS Controls, DoD 8500.01, etc. The Network Operations engineer should also be familiar with cybersecurity tools such as SIEM (Security Information and Event Management) systems, and vulnerability scanners i.e. Assured Compliance Assessment Solution (ACAS). This is an onsite role supporting Naval Facilities Engineering Systems Command (NAVFAC) in Norfolk, VA five days a week. Active Secret clearance or higher is required. This role requires a Familiarity with security frameworks and industry standards like NIST SP 800-82 Rev. A, ISO/IEC 27001, CIS Controls, DoD 8500.01, etc. The Network Operations engineer should also be familiar with cybersecurity tools such as SIEM (Security Information and Event Management) systems, and vulnerability scanners i.e. Assured Compliance Assessment Solution (ACAS). Required Skills • Proficiency in designing, deploying, and managing Cisco SD-WAN solutions., • Expertise in configuring and managing Palo Alto firewalls., • Understanding of network protocols, services, and security (e.g., TCP/IP, BGP, OSPF, VPN)., • Experience with network monitoring and management tools (e.g., SolarWinds, Cisco Prime)., • Active Secret clearance or higher., • Must have 7+ years of relevant, Network Engineering and operations experience with focus in designing, deploying and maintain enterprise networks., • Preferred Certifications include, • Cisco Certified Network Professional (CCNP) Enterprise, • Palo Alto Networks Certified Network Security Engineer (PCNSE), • Cisco Certified Internetwork Expert (CCIE) (optional) Salary Range: $120,000 - $135,000 Akira’s pay range for this position considers various factors including skills, years of experience, training, licenses, certifications, alignment with market data, and internal equity in the organization. This pay range estimate is a general guideline only and not a guarantee of compensation or salary, which Akira believes to be done in good faith in compliance with local laws. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. General Description of Benefits Akira offers its employees multiple options for medical plans (some with Health Savings Account), dental plans, and vision coverage, and a 401(k) plan with employer match. To promote work/life balance, Akira offers paid time off, including vacation and sick time, holidays, paid parental leave, military leave, bereavement leave, and jury duty leave. We also offer short and long-term disability benefits to protect employee income in the event of sickness or injury, life insurance, accidental death and dismemberment insurance, and critical illness insurance. Akira also offers tuition, training, and certification reimbursement for professional development and career advancement. Akira regularly reviews our total rewards package to ensure our offerings remain competitive and reflect the values and needs expressed by our employees. About Akira Technologies Akira strives to meet and exceed the mission and objectives of US federal agencies. As a leading small business cloud modernization and data analytics services provider, we deliver trusted and highly differentiated solutions and technologies that serve the needs of our customers and citizens. Akira serves as a valued partner to essential government agencies across the intelligence, cyber, defense, civilian, and health markets. Every day, our employees deliver transformational outcomes, solving the most daunting challenges facing our customers. Akira is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

Job DescriptionLocation: Norfolk, VA Clearance: Secret Position Type: Full-Time AERMOR is seeking an experienced Electronics Engineer IV to lead the design, development, testing, and integration of advanced electrical and electronic systems in support of C4ISR and related U.S. Navy Navigation Systems programs. The ideal candidate will possess a strong technical background in system design, architecture development, and technology assessment, with demonstrated experience supporting mission-critical naval electronics systems. This is not a remote position. Key Responsibilities: • Design, develop, and test electrical and electronic equipment supporting C4ISR or similar systems., • Lead system integration efforts including interface design, system architecture definition, and validation of hardware/software components., • Perform technology analysis and system assessments to support modernization and lifecycle improvements., • Develop and review system specifications, test and evaluation criteria, and logistics support documentation., • Collaborate with multi-disciplinary engineering teams to ensure compliance with design and operational requirements., • Provide technical oversight and mentorship to junior engineers and project teams., • Master’s Degree in Electrical Engineering (or related field) and 10 years of professional experience, or Bachelor’s Degree in Electrical Engineering (or related field) and 12 years of professional experience., • Proven experience in C4ISR systems or similar complex military systems engineering., • Expertise in at least one of the following specialized areas: Printed Circuit Board (PCB) interface protocols (I/Os), digital design using modern microprocessors, or analog, power, and/or RF circuit design, • Minimum of 5 years of technical experience supporting the design and development of U.S. Navy Navigation Systems., • Strong understanding of systems analysis, architecture development, and test/evaluation methodologies., • Excellent problem-solving skills, attention to detail, and communication abilities. Powered by JazzHR sFBAvIVC37

Job DescriptionLocation: Norfolk, VA Clearance: Secret Position Type: Full-Time AERMOR is seeking an Engineering Technician IV to provide advanced technical and engineering support for the design, construction, testing, and installation of U.S. Navy electronic and navigation systems. This position requires a skilled technician capable of interpreting engineering documentation, constructing components and subassemblies, conducting system tests, and performing troubleshooting and repairs on complex equipment. The individual will work with limited supervision and use independent judgment to ensure technical adequacy and conformance with engineering standards. This is not a remote position. Key Responsibilities: • Design, prepare, and modify engineering documents, schematics, and technical drawings to support system development and maintenance., • Construct components, subunits, or models based on established specifications or adapt standard equipment for specific applications., • Perform installation, testing, and maintenance of U.S. Navy electronic and navigation systems., • Follow engineering layouts and diagrams to assemble, wire, or package electronic devices and subassemblies., • Troubleshoot and correct malfunctions in systems or components using test equipment and diagnostic tools., • Conduct tests and experiments, make necessary modifications to test setups or procedures, and record and analyze results., • Select and operate appropriate test and measurement equipment; process and compile test data accurately., • Identify data inconsistencies or errors, research discrepancies, and clarify missing or incomplete information., • Assist engineers with design modifications by compiling and analyzing data on design, materials, and specifications., • Review operational performance data to identify causes of equipment failures and recommend corrective actions., • Perform recurring work independently, applying sound technical judgment and initiative within established procedures. Qualifications: • Five (5) years of practical technical experience with a degree or formal training, or seven (7) years with a high school diploma or GED., • Experience in the design, preparation, and modification of engineering drawings and documentation., • Ability to construct components, subassemblies, and simple models, and adapt standard equipment for specialized uses., • Skilled in troubleshooting, system testing, and data collection., • Capable of performing non-standard assignments with minimal supervision., • Proficiency in using engineering test equipment, tools, and CAD or drafting software., • Strong analytical, problem-solving, and organizational skills., • Hands-on experience with installation and maintenance of U.S. Navy electronic systems. Powered by JazzHR tNiEaAkFi4

Job DescriptionSalary: Company Description As a global engineering solutions firm that plays a leading role in the areas of plants, architecture and asset management, Hyundai Engineering is expanding into renewable energy to build a sustainable future. In the area of plants, the company provides total solutions for front-end engineering design (FEED) as well as engineering, procurement and construction (EPC). Job Summary We are seeking a skilled and motivated Civil Construction Engineer to join our project. The successful candidate will be responsible for overseeing technical interpretations of construction documents, civil-related construction activities, and coordination with subcontractors to ensure the timely and safe execution of work. This position also requires strong organizational and communication skills to support project management and maintain compliance with company and regulatory standards Key Responsibilities • Oversees technical interpretation of construction documents and drawings, recommending construction methods and equipment., • Manage site activities and provide daily reports to the Senior Manager, • Communicate with subcontractors and coordinate site operations, • Perform site environmental management duties, • Support the civil senior manager in project planning and execution tasks., • Build positive relationships with clients, architects, and contractors., • Manage conflicts and disputes, focusing on developing mutually acceptable solutions aligned with the contractual agreements., • Maintains data in required information systems or databases, and utilizes required software., • Ensure compliance with federal and state/city regulations, as well as company policies and procedures., • Complete assigned and required training for this role., • Weekend work may be required depending on the project schedule. Qualifications • 3 - 5 years of experience in civil or construction engineering or similar roles, • Strong understanding of construction drawings and construction practices., • Proficiency in civil engineering and construction software, • Microsoft Office experience (Word, Outlook, Excel, PowerPoint, etc.)., • Effective teamwork and communication skills Preferred • EIT certification, engineering licensure, or working towards licensure is an advantage., • Bachelor's degree in Civil Engineering, Construction Management, or related field, • Bilingual in English and Korean preferred but not required. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the essential functions typically require sitting, standing, climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, feeling, handling tools or controls, talking, hearing, seeing, repetitive motions, and include the physical ability to navigate active job sites and construction areas Employee may occasionally lift and/or move up to 50 pounds. Work Environment Work is performed in a variety of environments ranging from the office to construction sites, which may involve working near moving mechanical parts, equipment, or machinery on rough or uneven surfaces, and exposure to dust, noise, chemicals, odors, gas, oils, fumes, extreme temperatures, or heights. May occasionally be exposed to inclement or hazardous conditions, including but not limited to inadequate lighting, work space restrictions, and intense noises and travel; requiring moderate physical activities. The above statements are intended to describe the general nature and level of work being performed by incumbents. They are not intended to be an exhaustive list of all responsibilities, duties, skills required of personnel so classified and it is not a contract express or implied. All employees may have other duties assigned at any time.

Job DescriptionSalary: Company Description As a global engineering solutions firm that plays a leading role in the areas of plants, architecture and asset management, Hyundai Engineering is expanding into renewable energy to build a sustainable future. In the area of plants, the company provides total solutions for front-end engineering design (FEED) as well as engineering, procurement and construction (EPC). Job Summary We are seeking a detail-oriented and skilled Architectural Design Engineer to join our project. The candidate will be responsible for reviewing the building structure drawings and supporting the design changes and related techniques. This position requires a strong technical understanding of structural designs, effective document control, and communication skills between internal teams, subcontractors, and clients. Key Responsibilities • Manage and maintain construction projects in a safe, timely, and sustainable manner, • Support the overall documentation management for mechanical works, including contracts, submittals, RFAs, NCRs, and ITPs, • Manage materials and equipment tracking, including order status, delivery schedules, and inventory control, • Maintain up-to-date drawing files (Design drawings, Shop drawings, As-built, etc.) and ensure proper distribution to relevant teams, • Assist with preparing and reviewing Bill of Quantities (BOQ) and Material Inspection Requests (MIR)., • Coordinate with the site team to ensure that required materials and documentation are available on time, • Communicate with clients and subcontractors to clarify documentation and material-related issues, • Provide administrative and technical support to the Mechanical Manager, including data updates and reporting Qualifications • Bachelors degree or higher in Structural Engineering or a related field, • Minimum of 3 years of hands-on experience in structural design and construction (experience level may be adjusted based on project scale), • Proficiency in Microsoft Office experience (Word, Outlook, Excel, PowerPoint) Technical Skills • Proficient in Tekla Structures, • Proficient in AutoCAD, • Experience with BIM tools, including Revit Preferred • Experience with large-scale construction projects such as industrial facilities, plants, or high-rise buildings, • Understanding of international codes and standards (AISC, ACI, ASCE, etc.) and local regulations, • Strong teamwork, communication, and coordination skills, • U.S. Professional Engineer (PE) license preferred, • Bilingual in English and Korean is highly preferred for better coordination with the team Additional Information • Must be legally authorized to work in the U.S., • Weekend work may be required depending on the project schedule Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the essential functions typically require sitting, standing, climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, feeling, handling tools or controls, talking, hearing, seeing, repetitive motions, and include the physical ability to navigate active job sites and construction areas Employee may occasionally lift and/or move up to 50 pounds. Work Environment Work is performed in a variety of environments ranging from the office to construction sites, which may involve working near moving mechanical parts, equipment, or machinery on rough or uneven surfaces, and exposure to dust, noise, chemicals, odors, gas, oils, fumes, extreme temperatures, or heights. May occasionally be exposed to inclement or hazardous conditions, including but not limited to inadequate lighting, work space restrictions, and intense noises and travel; requiring moderate physical activities. The above statements are intended to describe the general nature and level of work being performed by incumbents. They are not intended to be an exhaustive list of all responsibilities, duties, skills required of personnel so classified and it isnota contract express or implied. All employees may have other duties assigned at any time.

Job Description Deadline Date: Friday 2 January 2026 (was Friday 12 December 2025) Requirement: SATCOM Engineering Support Services Location: Norfolk, VA, US Full Time On-Site: Yes Time On-Site: 100% Period of Performance: 2026 Base: As soon as possible but not later than 02 February 2026 – 31 December 2026, with the possibility to exercise following options: • 2027 Option: 01 January 2027 – 31 December 2027, • 2028 Option: 01 January 2028 – 31 December 2028 Required Security Clearance: NATO SECRET 1 PROJECT SPECIFICS 1. Scope This Statement of Work (SOW) defines the provision of specialized SATCOM Engineering Support Services to assist NATO entities in the definition, assessment, and evolution of future SATCOM capabilities. The Contractor shall provide expert engineering services to support the strategic planning, design, and definition of NATO SATCOM systems, ensuring alignment with operational requirements, interoperability standards, and emerging technologies within the Alliance’s communication and space domains. All work shall be performed as service-based deliverables, with measurable outputs and documented technical artefacts produced under NCIA’s supervision and in close coordination with Allied Command Transformation (ACT), ACO, and other NATO stakeholders. 2. Objectives The objective of this engagement is to provide engineering and analytical support to ongoing NATO activities related to the definition, harmonization, and modernization of SATCOM capabilities, including: • Assessment of current and future SATCOM architectures;, • Identification of capability gaps and dependencies;, • Development of engineering baselines and system-level requirements;, • Analysis of interoperability with NATO, national, and commercial SATCOM assets;, • Technical input to strategic planning, feasibility studies, and decision-making documents. 3. Tasks and Activities The Contractor shall perform, but not be limited to, the following tasks: 3.1 Engineering Analysis and Studies • Conduct technical assessments of SATCOM networks, terminals, and anchoring systems across NATO strategic, operational, and tactical domains;, • Support system architecture definition, including integration of MILSATCOM and COMSATCOM resources;, • Perform trade-off and feasibility analyses addressing performance, resilience, spectrum efficiency, and cost-benefit aspects;, • Contribute to the development of future-oriented SATCOM system concepts, including Low Earth Orbit (LEO) integration, software-defined payloads, and multi-orbit architectures;, • Create Analysis of Alternative documents for different options considered. 3.2 Requirements and Interface Definition • Develop and maintain system-level functional and technical requirements for future SATCOM systems and related ground infrastructure;, • Support interoperability and standardization activities (e.g., STANAGs, NATO interoperability profiles, SATCOM reference architectures);, • Provide interface control documentation (ICD) and configuration baselines for engineering reference. 3.3 Capability and Architecture Modelling • Contribute to modelling and simulation of SATCOM service delivery architectures and integration with existing Networks;, • Assess the impact of emerging technologies such as AI-driven resource management, optical links, and protected waveforms;, • Provide recommendations for technology insertion and obsolescence mitigation. 3.4 Stakeholder Coordination and Reporting • Liaise with ACT, ACO, and NCIA technical authorities, providing engineering inputs and consolidated documentation;, • Prepare technical briefings, reports, and data packages supporting NATO capability planning;, • Participate in workshops, technical meetings, and industry engagement events as required. 2 DELIVERABLES The contractor shall produce the following deliverables: Deliverable D1: Engineering Analysis Report(s) on SATCOM architectures, capabilities, and integration options, Analysis of alternatives documents Frequency: Quarterly or upon request Deliverable D2: Draft and final versions of system-level requirements and interface documents Frequency: As scheduled Deliverable D3: Technical briefings, presentations, and meeting minutes Frequency: As required Deliverable D4: Contribution to capability assessment documentation and technology surveys Frequency: As required 3 SERVICE KPIs AND PENALTIES The penalties defined below will apply to the payment amount based on the performance results measured through Annex B - Monthly Service Performance Report Objective KPI01: Deliverables submitted on schedule Standard: % of Deliverables Performance Threshold: 99.9% of the measured period Penalty (if under performance threshold): 1% Objective KPI02: Technical quality of documentation (clarity, completeness, accuracy) Standard: % of Deliverables Performance Threshold: 99.9% of the measured period Penalty (if under performance threshold): 1% Objective KPI03: Responsiveness to tasking and change requests Standard: % of Completion Performance Threshold: 100% of the scheduled tasks Penalty (if under performance threshold): 1% Objective KPI04: Contribution to stakeholder coordination Standard: % of Completion Performance Threshold: 99.9% of the measured period Penalty (if under performance threshold): 1% Objective KPI05: Customer satisfaction (feedback from ACT/NCIA leads) Standard: 4/5 average rating Performance Threshold: 4/5 average rating Penalty (if under performance threshold): 1% 4 PAYMENT MILESTONES 1. The payment shall be dependent upon successful acceptance of the Monthly Service Performance Report Acceptance (Annex B) signed by the SATCOM Operations Manager., 2. Invoices shall be accompanied by the Monthly Service Performance Report (Annex B) signed by the SATCOM Operations Manager., 3. Payment schedule will be according to payment milestones upon completion. Upon completion and validation of each milestones and at the end of the monthly milestone, following the acceptance of the Monthly Service Performance Report. Payments will be made according to the following schedule: 2026 BASE performance – 02nd of February 2026 (tentative) to 31 December 2026 Associated Deliverables: Provision of SATCOM System Management Services Completion Deadlines: 28 Feb, 31 Mar, 30 Apr, 31 May, 30 Jun, 31 Jul, 31 Aug, 30 Sep, 31 Oct, 30 Nov, 31 Dec Monthly Payment Amount: 1/11 total cost for calendar year Monthly Payment Document: Completion of milestone shall be accompanied documented Monthly Service Performance Report Acceptance (Annex B) signed by the Station Commander or authorized point of contact and the Contractor. This document will accompany the invoice. The deadline’s split is calculated considering a starting date 2nd of February 2026. This will be adjusted based on actual starting date. 2027, 2028 OPTIONS: 01 JANUARY TO 31 DECEMBER 2027/2028 Associated Deliverables: Provision of SATCOM System Management Services Completion Deadlines: 31 Jan, 28 Feb, 31 Mar, 30 Apr, 31 May, 30 Jun, 31 Jul, 31 Aug, 30 Sep, 31 Oct, 30 Nov, 31 Dec Monthly Payment Amount: 1/12 total cost for calendar year Monthly Payment Document: Completion of milestone shall be accompanied documented Monthly Service Performance Report Acceptance (Annex B) signed by the Station Commander or authorized point of contact and the Contractor. This document will accompany the invoice. 5 PRACTICAL ARRANGEMENTS Place of Performance: Work will be conducted primarily on-site in ACT Norfolk USA in designated as Class I and II Security Area. Travel Requirement: Travel may be required to other Purchasers’ locations on exceptional basis. Travel arrangements will be the responsibility of the contractor and the expenses will be reimbursed in accordance with Article 5.5 of AAS Framework Contract and within the limits of the NCIA Travel Directive. Hours of Operation: The Contractor is expected to follow the Purchaser’s working hours — Monday to Thursday from 08h30 until 17h30 and Friday from 08h30 until 15h30 (USA Eastern time zone). Reporting: The Contractor shall produce Monthly Service Performance Report completion reports (format: e-mail update), which include details of activities performed, the list of the KPI completion and penalties if it is applicable. Safety and Compliance and other arrangements: • Follow all safety protocols to prevent accidents and injuries., • Ensure compliance with agency, industry standards and regulations., • The Contractor shall manage and be responsible for all activities mentioned in the Section 2., • Install and operate the equipment following the manufacturer’s requirements., • Minimize the impact to the service during the execution of the work., • Bring immediately to the attention of the Purchaser Point of Contact on-site any issues preventing the execution of the work., • The Contractor shall: Strive to lower the rotation of Contractor’s personnel and maintain the same staff Contractor working under this SoW. [See Requirements] 7 SECURITY CLEARANCE It is mandatory for the Contractor to be in possession of a valid NATO Secret security clearance for the duration Period of Performance. Only a valid NATO security clearance is acceptable- no equivalents will be accepted. Security requirements from NS Projects are in compliance with Security Requirements for NATO Secret (NS) Projects (Classified Projects). Services delivery should be compliant with Project Security Instructions (PSI). Requirements SERVICE DELIVERY REQUIREMENTS One resource is required to deliver the services under this SOW, with the below requirements: The Contractor shall fulfil the following requirements: • Security Clearance: The Contractor shall possess valid NATO SECRET Personal Security Clearances for the duration of the Contract performance., • Education: University Degree in Telecommunications, Electronics, or a related field, with at least two years of post-related experience; or Higher Vocational Training with a minimum of five years of post-related experience., • SATCOM Expertise: Minimum of three years of practical experience in SATCOM systems, including UHF, SHF, HF and EHF systems., • Technical Expertise: Familiarity with modern military communication networks, including interfaces, protocols, and experience with SATCOM Operations., • Deep knowledge of SATCOM architecture principles, including link budget analysis, modulation schemes, error correction coding, satellite network topologies, • Strong understanding of RF engineering, antenna systems, propagation modelling in SATCOM bands, cybersecurity architecture for SATCOM, including encryption, • Familiarity with SATCOM related standards, such as DVB-S2, DVB-S2X, MIL-STD-188, experience in Software Defined Networking (SDN) in SATCOM, • Customer Service and Incident Management: Familiarity in service management (incident, problem management, etc.) and a customer-focused approach in a control centre environment., • NATO Environment: prior experience working in a NATO or multinational military setting, with a solid understanding of NATO operational standards and protocols.

Job Description We are seeking an experienced Network Intrusion Detection Engineer to join our cybersecurity team. The ideal candidate must possess strong Linux engineering expertise with experience managing YAML configuration files, and how these configurations integrate and influence the Intrusion Detection Systems/Intrusion Prevention Systems (IDS/IPS). Highly qualified candidates will have hands-on engineering and O&M experience with Suricata and/or other network-based IDS capabilities such as Snort, VectraAI, Corelight, etc. You will play a critical role in deploying, tuning, and maintaining the IDS within a complex enterprise IT environment, primarily running on Red Hat Enterprise Linux. What You’ll Work On: • Designing, deploying, and maintaining IDS/IPS systems across a large enterprise with multiple networks., • Developing, reviewing, and optimizing YAML configuration files to ensure optimal detection capabilities and minimal false positives., • Understanding and managing the interaction between YAML configuration and its runtime engine, including rule loading, protocol decoding, and logging., • Tuning IDS/IPS for optimal performance with NICs, including configuring Direct Memory Access (DMA), RSS queues, interrupt coalescing, and leveraging any NIC-specific acceleration features., • Collaborating with security teams to integrate IDS/IPS with SIEM and other security monitoring platforms., • Troubleshooting installation and operational issues specific to IDS/IPS on Red Hat Enterprise Linux, addressing compatibility, kernel module requirements, SE-Linux policies, and performance tuning., • Identifying and mitigating common pitfalls encountered when deploying IDS/IPS in large-scale enterprise environments, including package dependencies, system resource constraints, and NIC driver/configuration issues., • Provide detailed documentation and runbooks for Suricata configuration, tuning NICs, and deployment processes., • Proven experience working with Snort, Suricata, Corelight or other network IDS/IPS systems, including hands-on management of its YAML configuration files., • Strong knowledge of configuration structure, syntax, and how it controls detection rules, logging, and output modules., • Extensive experience administering Red Hat Enterprise Linux (RHEL) systems, including package management (yum/dnf), kernel module management, SE-Linux configuration, and system optimization via Unix CLI and other remote shell access vectors (puTTY, SSH, etc.), • Hands-on experience tuning Suricata for high-performance packet capture with Napatech NICs or similar advanced network interface cards., • Familiarity with NIC-specific features such as DMA, Receive Side Scaling (RSS), interrupt moderation, and offload capabilities, and how to configure them for Suricata., • Experience troubleshooting Suricata’s interaction with NIC drivers and kernel modules in an enterprise environment., • TS/SCI clearance with the ability to obtain a counter-intelligence polygraph., • Associate’s degree and 5+ years of experience supporting IT projects and activities or Bachelor’s degree and 3+ years of experience supporting IT projects and activities or Master’s degree and 1+ years of experience supporting IT projects and activities. Years of experience may be accepted in lieu of degree., • DoD 8570 IAT Level II Certification, including Security+ CE, CCNA-Security, GSEC, SSCP, CySA+, GICSP, or CND Certification., • Ability to obtain a DoD 8570 Cyber Security Service Provider - Infrastructure Support Certification, including CEH, CySA+, GICSP, SSCP, CHFI, CFR, Cloud+, or CND Certification, within 60 days of start date. Additional Qualifications: • Experience with scripting languages (Bash, Python, YAML/Ansible, etc.) to automate Suricata configuration and deployment tasks., • Proficient understanding of network protocols, intrusion detection methodologies, and security event correlation., • Experience integrating Suricata with Splunk, or other SIEM solutions., • Knowledge of containerized deployments of Suricata (Docker/Kubernetes) in enterprise environments., • Detection and Response (NDR) solutions, including Trellix/FireEye, Corelight, Endace, Vectra AI, Dark Trace, Cisco Security Network Analytics, Open XDR, Fortinet FortiNDR, Trend Vision, etc., • Ability to be a self-starter, work without considerable direction, and work with a team. Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? • Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS, • 401k Contribution from Day 1, • PTO + 11 Paid Federal Holidays, • Long & Short Term Disability Insurance, • Group Term Life Insurance, • Tuition, Certification & Professional Development Assistance, • Workers’ Compensation, • Relocation Assistance

Job Description Founded in 1995, ESN is a Small Disadvantaged Business (SDB), Service-Disabled Veteran-Owned Small Business (SDVOSB) and Veteran Owned Small Business (VOSB). ESN delivers trusted solutions that support our nation's defense. For more than two decades, we have been providing our military and government customers with mission-critical services including engineering and technical support, strategic and program management, testing and evaluation, operations support, and information technology. We are committed to proven, repeatable corporate quality management processes and are certified CMMI Maturity Level III - Development/Services & ISO 9001:2015. ESN is seeking a Cybersecurity Engineer III. Position located on site in Chesapeake, VA. ESN is seeking a Cybersecurity Engineer III to support a contract with Naval Information Warfare Center (NIWC), Atlantic, in Norfolk, VA. The contract to support NIWC LANT consists of Independent Validation & Verification, Operations, Sustainment, and Installation support. The Maintenance Figure of Merit (MFOM) systems provide near real-time material-based readiness reporting to the Defense Readiness Reporting System-Navy (DRRS-N) and provides three additional primary capabilities to the Fleet including Ashore and Afloat systems. This support includes Cybersecurity, automated software testing, Scrum Master support, operating in the AWS Cloud, management of JIRA/Confluence, and project support. Position Description: · Planning, implementing, upgrading, and/or monitoring cybersecurity measures to improve cyber defense and maintain a cyber-resilient network. · Assessing cybersecurity vulnerabilities for risks and proposing and implementing remediation actions or risk mitigation strategies. · Ensuring appropriate security controls are in place that will safeguard digital files and electronic infrastructure. · Responding to computer security breaches to re-establish protections and making required reports. · Schedule is Monday through Friday with some weekend support required. · Performs other duties and works schedules as assigned by management, which may include changes to duties, responsibilities, or work hours as required to meet contractual obligations, mission requirements, or the needs of the organization. Minimum Requirements: · Required Education: Master's degree in Cybersecurity Engineering, Computer Engineering, Electrical Engineering, or Electronics Engineering. Or master's degree in mathematics with a concentration in computer science or equivalent. · Required certification - (Preferred certifications include AWS Security Certification Specialty and Certified Information Systems Security Professional. · Ten (10) years of experience preparing, implementing, and ensuring compliance with cybersecurity policy, to include Assessment and Authorization requirements. · Specific Experience - Three (3) years' experience conducting security audits on IT infrastructure and managing appropriate scans and STIG checklists. · Experience with the DoD Risk Management Framework (RMF), including execution of RMF Steps 1-6, development of security authorization packages (System Security Plan, POA&M, SAR, etc.), and coordination with Authorizing Officials (AO) and Security Control Assessors (SCA). · Familiarity with Navy use of eMASS for submission and tracking of RMF packages. · Experience supporting cybersecurity for Navy Ashore and Afloat platforms Active DoD Secret Clearance Required Job Posted by ApplicantPro

Job DescriptionMechanical Engineer Our client, an industrial manufacturer is looking to add an experienced mechanical engineer to their growing team.. The ideal candidate will have a strong understanding of mechanical engineering principles and be proficient in SolidWorks. The position will be responsible for the design, development, and testing of mechanical components and systems. Responsibilities: • Design and develop mechanical components and systems, • Perform finite element analysis (FEA) to ensure the structural integrity of designs, • Test and validate mechanical components and systems, • Bachelor's degree in Mechanical Engineering or a related field, • 3-10 years of experience in mechanical engineering, • Proficient in SolidWorks and other CAD software, • Strong understanding of mechanical engineering principles, • Ability to work independently and as part of a team, • Excellent communication and interpersonal skillsAbout Us: Port View Resources provides outsourced recruitment services to America's Manufacturers, Designers, and MEP firms nationwide.

Job Description On our expert team, you’ll perform work focused on implementing and operating next generation security solutions for government and commercial clients. You’ll perform hands-on evaluation, implementation, and operation of leading security cyber defense tools and technologies, and apply in-depth defense strategies to large and complex networks to rapidly identify vulnerabilities and threats, prioritize response actions, and develop effective countermeasures. You’ll apply thought leadership in a highly collaborative and innovative work environment to solve complex security challenges. You will lead a team as they engineer solutions to complex challenges for customers using knowledge network engineering, Active Directory, and system administration. In this role, you'll closely impact mission success, protecting data and networks from malicious payloads and actors. With mentoring, challenging hands-on problem-solving, and opportunities to learn new tools and skills, we focus on growing as a team to make the best solutions for our customers. Work with us as we secure and protect our nation's most sensitive capabilities. What You’ll Work On: • Develop relationships quickly and easily with other teams, communicating the complexities of security with a wide variety of audiences, including senior management., • Manage infrastructure and cybersecurity controls, including enhanced detection and vulnerability capabilities and improved event correlation in large enterprises., • Experience with the deployment or daily maintenance of Forescout CounterACT appliances, • 5+ years of experience performing systems administration for Windows or Linux, including performing basic troubleshooting and installation or configuration, monitoring system performance or availability, and performing security upgrades, • Experience architecting and designing IP networks, including developing and documenting network topologies, • Experience with network engineering, including physical or logical such as installation and activation of ports, configuration of switches, and LANS, VLANS, and network FW, or appliances or network administration services such as Active Directory, Guests LANS, and domain management, • Knowledge of multi-domain architectures, including data center, WAN, and LAN in virtualized architectures, • Active TS/SCI clearance; willingness to take a polygraph exam, • Associate’s degree and 10+ years of experience supporting IT projects and activities, Bachelor’s degree and 8+ years of experience supporting IT projects and activities, or Master’s degree and 6+ years of experience supporting IT projects and activities, • DoD 8570 IAT Level II Certification such as Security+ CE, CCNA-Security, GSEC, SSCP, CySA+, GICSP, or CND Certification, • Ability to obtain a DoD 8570 Cybersecurity Service Provider - Infrastructure Support Certification such as CEH, CySA+, GICSP, SSCP, CHFI, CFR, Cloud+, or CND Certification, within 30 days of start date Nice If You Have: • Knowledge of federal information security policies, standards, procedures, directives, frameworks, federal security authorizations, assessment, and risk management processes for enterprise systems, • Ability to install and deploy Forescout in a customer environment, • Ability to integrate cybersecurity data using enterprise or custom tools data aggregation and analysis tools, including Splunk, • Ability to provide support in a Tier II IT operations and maintenance role, including ticket work information updates, issue responses, and remediation, • Ability to be a self-starter, work without considerable direction, and work with a team Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? • Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS, • 401k Contribution from Day 1, • PTO + 11 Paid Federal Holidays, • Long & Short Term Disability Insurance, • Group Term Life Insurance, • Tuition, Certification & Professional Development Assistance, • Workers’ Compensation, • Relocation Assistance

Job DescriptionSalary: Job Description Job Description Description Founded in 2003 and headquartered in Norfolk, Virginia, IPConfigure. Inc. is a privately held veteran owned video surveillance research and development software company. As a developer of IP video surveillance solutions, IPConfigure offers a variety of products - all of which leverage a browser-based interface while supporting both Windows and Linux architectures and are capable of seamlessly supporting unlimited cameras, locations, and users in a centralized, distributed, or hosted architecture. IPConfigure's Orchid VMS platform and SteelFin Appliances have been successfully deployed in facilities ranging from quick service restaurants to international ports, hospitals, and universities. Job Title: Senior Quality Assurance (QA) Engineer for Video Surveillance Software Application Department: Engineering Position: Exempt, Full-Time Job Summary IPConfigure is looking to hire a Sr Quality Assurance Engineer who will be responsible for creating and implementing a strategy for quality coordination and testing as well as suggesting solutions to identified quality problems. The ideal QA candidates will have experience with test-driven development, continuous integration and testing workflows, as well as Linux development tools and development environments. This is a full time position based at our Norfolk, VA office. Duties/Responsibilities • Conduct and oversee software testing for IPConfigure's cross-platform, browser-based video surveillance products., • Maintain software testing infrastructure, including both software and hardware platforms., • Plan, create and manage the overall Quality Planning strategy to support Continuous Integration (CI) workflows., • Collaborate with the Engineering team to ensure consistent project execution. Required Skills/Abilities • Experience with a variety of different testing techniques such as UI Testing, Automated Testing, Test Driven Development Strategies, etc., • Experience with coding using a language such as bash, python, Java, JavaScript, etc., • Experience with software QA tools and processes., • A sense of ownership and pride in your performance and its impact on the companys success., • Critical thinker and problem-solving skills., • Team player., • Good time-management skills., • Great interpersonal and communication skill., • Bachelors degree in an IT related field Benefits • Industry competitive salaries based on experience., • Generous PTO and Work From Home Policy., • Health, Vision, Dental, and Life insurance policies., • Flexible Spending Account and Health Saving Account.

Job Description Develop innovative solutions to enable secure and reliable operations of enterprise computer systems. Engineer, design, develop, and implement enterprise network cyber defense capabilities to prevent sophisticated cyber threats. Understand the fundamentals of layered defense and zero trust technologies. Prevent adversary network threats, identify advanced attack vectors, and thwart methods of exploitation. Work individually or in a small integrated team, and potentially lead a task, project, or team. Ensure project completion and provide guidance and direction to lower-level technicians, specialists, and managers. Provide expertise in the engineering design, development, direction, and implementation of enterprise network cyber defense capabilities. Apply familiarity with the utilization, configuration, and implementation of cyber defense capabilities, including web content filters, email security capabilities, Intrusion Detection System, Intrusion Prevention System, Host Based Security Systems, Security Incident and Event Management tools, Domain Name System security practices, advanced log analysis, network monitoring, network flow analysis, packet capture analysis, network proxies, firewalls, anti-virus capabilities, Linux or UNIX command line, and access control lists. Requirements • 4+ years of experience with privileged and elevated access operating, maintaining, and patching a DoD Assured Compliance Assessment Solution (ACAS), • Experience with Windows and Linux, including installing, configuring, or maintaining servers operating systems and applications, • Experience working with STIGs, SCAP, and cybersecurity best practices, • Active TS/SCI clearance; willingness to take a polygraph exam, • HS diploma or GED and 7+ years of experience conducting or supporting cyber engineering projects and activities, Associate’s degree and 5+ years of experience conducting or supporting cyber engineering projects and activities, Bachelor’s degree and 3+ years of experience conducting or supporting cyber engineering projects and activities, or Master’s degree and 1+ years of experience conducting or supporting cyber engineering projects and activities, • DoD 8570.01-M Information Assurance Technician (IAT) Level II Certification, including Security+ CE, CCNA-Security, GSEC, SSCP, CySA+, GICSP, or CND Certification, • Experience with Gigamon, Ansible, Encase, Fidelis, Suricata, Varonis, or VMWare tools, • Experience with Cloud Enterprise, authorizing cloud systems, and Cloud services, including AWS, Azure, or GCP, • Experience with big data analytics, machine learning, artificial intelligence, or anomaly detection, • Experience with Zero-Trust Architecture, • Experience with DevSecOps, CI/CD, IaC and CaC, IT Infrastructure Library, and IT Service Management, • Experience scripting in PowerShell and BASH command line interfaces or in Python or Perl scripting languages, • Experience in a consulting or client-facing environment, • Ability to automate security configurations of Linux and Windows systems, and recommend and implement remediations for non-compliant security controls, • Possession of excellent verbal and written communication skills, including using presentations to convey complex ideas to client and internal staff Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? • Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS, • 401k Contribution from Day 1, • PTO + 11 Paid Federal Holidays, • Long & Short Term Disability Insurance, • Group Term Life Insurance, • Tuition, Certification & Professional Development Assistance, • Workers’ Compensation, • Relocation Assistance