Trabajos machinist en Hartford, ConnecticutCrear alertas

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM's such as Pratt& Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The Shaping Machinist will independently and safely set up and operate CNC and manual shapers. Essential Functions • Read and understand process travelers, setup journals, operation sheets and CMM inspection reports to produce complex finished product., • Setup, tooling adjustments and program offsets as necessary., • Ability to accurately inspect work utilizing various instruments including gages, indicators and micrometers., • Perform daily TPM responsibilities., • Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required., • Actively participate in cross-training, cost savings and team activities to improve processes., • Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies • Technical capacity, • Problem-solving / analysis, • Initiative, • Results-driven Experience and Education • Minimum of 1 year of aerospace CNC machining experience is required., • High school diploma or equivalent required., • Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. * Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM’s such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company, founded in 1982, has grown through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success. Position Summary The CNC Machinist will independently and safely set up and operate 3, 4, and 5 axis equipment. Essential Functions · Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. · Make tooling adjustments and program offsets as necessary. · Ability to accurately inspect work utilizing various instruments, including OD & ID indicating gaging, indicators, micrometers, height stands and verniers. · Perform daily TPM responsibilities. · Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. · Actively participate in cross-training, cost savings and team activities to improve processes. · Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies · Technical capacity · Problem-solving / analysis · Initiative · Results-driven Experience and Education · Minimum of 3 years of aerospace CNC machining experience is required. · High school diploma or equivalent required. · Degree/certificate from vocation school or college program is a plus, but relevant experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. * Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM’s such as Pratt& Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The Shaping Machinist will independently and safely set up and operate CNC and manual shapers. Essential Functions · Read and understand process travelers, setup journals, operation sheets and CMM inspection reports to produce complex finished product. · Setup, tooling adjustments and program offsets as necessary. · Ability to accurately inspect work utilizing various instruments including gages, indicators and micrometers. · Perform daily TPM responsibilities. · Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. · Actively participate in cross-training, cost savings and team activities to improve processes. · Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies · Technical capacity · Problem-solving / analysis · Initiative · Results-driven Experience and Education · Minimum of 1 year of aerospace CNC machining experience is required. · High school diploma or equivalent required. · Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. * Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Aerospace Company based in Bloomfield is seeking highly motivated and results driven Machinists and Waterjet operators to join our growth oriented and forward thinking team of professionals. Waterjet/Machine operator should be able to efficiently pull, move and load material on waterjet /machine table. Record and fill out proper paper work to meet customers requirement as well as following all internal procedures. Waterjet/Machinist operator will be required to process the following activities. Responsibilities include the following. Must be able to read and understand work instructions information ( English Only ) Effectively communicate with shop floor supervisor and production control manager Perform machine push button cycles Perform daily maintenance check list Produce quality parts and verify them for accuracy. Inspect parts and understand any changes if required Run multiple machines Safely move material pallet jack / charts Maintain a clean work environment Clean all tools and machines at end of shift Report any non-conformances to shop floor supervisor immediately Turn off all equipment at end of shift Qualifications and Skill Requirements 1-3 years of CNC machine tool experience in a manufacturing environment Read and understand blueprints Detailed with good decision skills to meet customers demand Work with Shop Floor Supervisor for suggesting improvements Capable of lifting 40 pounds frequently Capable of working in a noisy environment. Capable of working extra hours Capable of working in wet environments Highly Desirable Experience working for metal fabrication and/or machining companies in a low volume/high mix environment Company Information and How to Apply For immediate consideration for this career expanding opportunity, e-mail your letter of interest and resume to our Human Resources Department. We observe the provisions of the Drug Free Workplace Act and are an Equal Opportunity Employer All candidates must send a cover letter and resume for consideration.

Job Description Build Precision. Advance Your Craft. Based in Windsor, CT. Join a team where your machining expertise drives results. You’ll turn complex drawings into finished components by programming, setting up, and operating CNC equipment with a focus on milling. Your work will uphold tight tolerances, reliable throughput, and on-time delivery for our customers. Your Impact • Translate blueprints and specifications into efficient machining plans., • Set up and operate CNC mills; verify accuracy with rigorous quality checks., • Troubleshoot, adjust, and perform routine maintenance to sustain uptime., • Partner with engineering and production to refine tooling and cut strategies., • Maintain a tidy, safe workstation and contribute to a continuous-improvement culture. What It Takes, • High school diploma or equivalent; a machining-related technical degree is a plus., • Demonstrated experience as a CNC machinist with strong milling capability., • Confidence reading/interpreting technical drawings and blueprints., • Uncompromising attention to detail and quality., • Ability to work independently and collaborate within a fast-moving shop., • Proactive problem-solving approach. Physical Requirements, • Stand for extended periods and perform repetitive tasks., • Manual dexterity to manipulate small parts and tools., • Lift up to 50 pounds as needed. Equipment & Technologies, • CNC Mill (3–4 axis VMC), • CNC Lathe (2–4 axis), • CNC Mill (5+ axis VMC) Key Proficiency CNC Machine Setup & Changeover Benefits • Health insurance, • 401(k) matching, • Vision insurance, • Dental insurance, • Paid holidays Advance your machining career in Windsor, CT—where precision, teamwork, and continuous improvement come together.

Job Description Kamatics is seeking an experienced Abrasive Machinist IV - Precision Grinder (2nd Shift) to support production operations by performing complex grinding processes to tight aerospace tolerances. This role is critical to ensuring the precision and quality of our high-performance bearing components. About Kamatics: Kamatics is a global leader in high-performance bearings and engineered tribological solutions for aerospace, defense, and industrial applications. Our team develops self-lubricating bearings and precision components that deliver durability, reliability, and performance in the harshest environments. We take pride in engineering excellence, collaborative problem solving, and a culture built on innovation and customer trust. Key Responsibilities • Independently set up, adjust, and operate OD and ID grinding equipment, • Select and apply appropriate grinding wheels based on material type, tolerance, and finish requirements, • Perform wheel dressing and adjustments to maintain precision and surface integrity, • Execute form grinding and complex setups on aerospace components, • Interpret blueprints and GD&T requirements to meet tight tolerances and surface finish specs, • Troubleshoot issues related to surface finish, chatter, and wheel performance, • Select workholding methods, speeds, feeds, and machine parameters, • Partner cross-functionally to meet quality and delivery targetsRequired Qualifications, • 4+ years of hands-on grinding experience (OD, ID, or centerless) in a precision manufacturing environment, • Strong knowledge of grinding wheel selection, composition, and dressing techniques, • Ability to perform independent grind setups, • Experience working to tight tolerances in aerospace or high-precision environments, • Solid understanding of shop math and GD&TPreferred, • Experience with form grinding or honing, • Aerospace or bearing manufacturing backgroundFoundational Machinist Competencies (All Levels) Dependability: Reliable, punctual, and able to follow instructions with appropriate supervision Quality & Continuous Improvement: Maintains quality while optimizing efficiency; demonstrates attention to detail Communication: Communicates clearly and effectively Teamwork & Collaboration: Builds positive working relationships Safety & Compliance: Follows safety protocols, maintains good housekeeping, and adheres to company policies Physical Requirements Continual standing Frequent mental and visual attention Frequent bending, twisting, and grasping tools/materials Occasional (15–40%) lifting and moving of materials up to 50 lbs Benefits: At Kamatics, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. Kamatics is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires using information subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Shift: 2nd Shift | 3:15 PM – 12:45 AM, Monday–Friday One hour of mandatory daily overtime currently required

Job Description Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: The CNC Machinist performs complex machine setups on 5 axis mill/turns machines. Has G & M code knowledge and is able to run and inspect parts with little to no supervision. This position is for 2nd shift with a 20% differential. Climate control, newly renovated building. Essential Responsibilities: • Ability to setup and run machines accurately, and efficiently, • Able to read operation sheets and blueprints, • Able to maintain quality standards and accurately measure completed work, • Develop and maintain effective working relationships with peers, supervisor, and other staff, • Other duties as directed by supervisor Qualifications: • High school diploma or GED required; post-secondary CNC education preferred, • 3+ years of CNC machine operation, • Okuma control knowledge a plus, • G & M code understanding, • Strong verbal communication and problem-solving skills, • Attention to detail and ability to deal with complexity, • Capable of working in a customer-focused, deadline-driven environment while maintaining a positive attitude, • Interested in learning with, and from, engineering and programming team to improve operations Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Job Description Enjet Aero machines and fabricates complex jet engine parts, components, and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: The CNC Machinist performs complex machine setups on 3, 4 and 5 axis machines, has G & M code knowledge, and is able to run and inspect parts with little to no supervision. Essential Responsibilities: • Ability to setup and run machines accurately, and efficiently, • Able to read operation sheets and blueprints, • Able to maintain quality standards and accurately measure completed work, • Develop and maintain effective working relationships with peers, supervisor, and other staff, • Other duties as directed by supervisor Qualifications: • High school diploma or GED required; post-secondary CNC education preferred, • 1+ years of CNC machine operation, • HAAS and Okuma control knowledge a plus, • G & M code understanding, • Strong verbal communication and problem-solving skills, • Attention to detail and ability to deal with complexity, • Capable of working in a customer-focused, deadline-driven environment while maintaining a positive attitude, • Interested in learning with, and from, engineering and programming team to improve operations Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Job Description Job Title: Assembly Technician / Machinist Department: Component Repair Reports To: Component Repair Supervisor FLSA Status: Hourly Non-Exempt Position Status: Direct Work Hours: 7:00AM - 3:30PM SUMMARY Responsible for performing various assembly, machining and blending operations in accordance with WGPW established methods and practices. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities. • Operation of Bridgeport, • Operation of Surface Grinder, • Disassembly, Rework and Assembly of aerospace components, • Cleaning parts by hand using brushes, scotch brite, wire wheels, varsol and other various cleaning solvents and abrasive blast methods., • Removing broken bolts and hardware., • Chasing threads and installing heli coils or threaded inserts as required., • Modification work such as blending, deburring and polishing., • Removing and replacing airseals, nut plates, helicoils and other miscellaneous hardware using associated equipment., • Use and interpretation of appropriate technical data, including but not limited to travelers, blue prints and other technical data as provided., • Performs tooling repair in support of the engine shop, • Maintains a safe and clean work area and adheres to all housekeeping requirements. Follows all safety procedures and rules and properly wears all safety protective equipment as required. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the Knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • High school or equivalent plus Three years of related machine shop experience., • Previous experience in the use of hand tools, air tools and riveting equipment and processes., • Experience with precision measuring equipment., • Experience in operation of milling and surface grinding machines, • Experience in the overhaul and repair of aviation components is a strong plus. PHYSICAL & ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, and use hands to finger, handle or feel objects, tools and controls. The employee is occasionally required to walk, sit, reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee must occasionally lift and move up to 50 pounds. While performing the duties of this job, the employee may occasionally work in high, precarious places and in outside weather conditions or be exposed to moving mechanical parts, fumes, airborne particles, solvents, and oils. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Position Summary: The Prototype Machinist will be responsible for machining precision components for engine prototypes and test fixtures. This role requires strong CNC programming and machining experience, exceptional attention to detail, and the ability to work in a fast paced R&D environment. The ideal candidate is hands-on, self-driven, and comfortable working with both CNC and manual equipment. Key Responsibilities: • Program, set up, and operate CNC milling machines and lathes, with an emphasis on multi-axis milling., • Utilize Haas and Fanuc controls to execute complex machining operations., • Create and optimize machining programs using MasterCam (preferred)., • Produce high-precision prototype components from engineering drawings, 3D models, and sketches., • Inspect parts to ensure dimensional accuracy and quality standards are met., • Operate manual machine tools, including:, • Surface grinder, • Bridgeport mill, • Manual lathe, • Collaborate closely with engineers, designers, and technicians to refine prototype designs., • Maintain a safe, clean, and efficient work environment., • Assist in developing machining processes, tooling selections, and fixture designs for prototype builds. Required Qualifications: • Proficiency operating and programming CNC mills and lathes; experience with multi-axis milling strongly preferred., • Strong working knowledge of Haas and Fanuc controls., • Experience programming and tool-pathing using MasterCam (preferred but not required)., • Demonstrated ability to operate manual machine tools (surface grinder, Bridgeport, manual lathe)., • Ability to read and interpret complex mechanical drawings and GD&T., • Strong problem-solving skills and the ability to work independently on prototype projects., • High attention to detail and commitment to quality.

Aerospace CNC Machinist – Milling & Turning New Britain CT Must be US Citizen living in Connecticut Full-Time | 1st & 2nd Shift Available Competitive Pay, 28.00 to 45.00 DOE + Overtime Available Are you a true CNC Machinist? We’re looking for experienced Aerospace CNC Machinists with strong Milling experience to join our aerospace manufacturing team. If you can make offsets, adjust programs, hold tight tolerances, and understand the importance of precision machining, we want to talk to you. Milling Experience is Priority Responsibilities: • Set up and operate CNC Milling and Turning machines, • Make tool offsets and machine adjustments as needed, • Read and interpret blueprints and GD&T, • Perform quality checks to ensure aerospace tolerances are met, • Work independently while maintaining production standards, • Support overtime needs when production demands increase Requirements: • CNC Machinist experience in Aerospace Manufacturing preferred, • Strong Milling experience required, • Ability to make offsets and machine changes independently, • GD&T knowledge required, • Experience with FANUC Controls preferred, • Ability to work overtime as needed, • Stable work history and strong attention to detail Machines: Milling Machines • HAAS UMC 1000, • OKUMA 6300, • Daewoo DB 230 – FANUC Control Turning Machines • All VTL Machines – FANUC Control 1st and 2nd Shift Available This is a great opportunity to join a respected aerospace manufacturer looking for machinists who take pride in their craft and want long-term stability and growth. Apply today or contact us directly to learn more.

CNC Lathe Machinist What happens when a skilled machinist finally joins a company where precision work is respected, quality matters, and leadership invests in long term careers? A long established aerospace manufacturer is hiring experienced CNC Lathe Machinists for full time openings, right away! 1st & 2nd Shift available (Mon–Fri, 7am–3:30pm OR 4:30pm–12:30am) $$ Additional 15% shift differential for 2nd shift $$ This is a full production CNC Lathe Machinist role. Only apply if you meet the minimum requirements - you must have real CNC machining and Lathe experience. What You Will Do: • Run CNC lathes producing tight tolerance aerospace parts, • Read blueprints and work with GD&T, • Inspect parts using calipers, micrometers, height gauges, indicators, and other precision tools, • Troubleshoot issues and help keep production moving What You Need: • Minimum 3 years of CNC machining with strong CNC lathe experience required, • Ability to read blueprints, understand GD&T and hold tight tolerances, • Experience with calipers, micrometers, and precision tools, • Detail oriented mindset, Strong communication and problem solving skills What You Get: $20–$36/hour (based on experience) (additional 15% shift differential for 2nd shift) • Health, dental, vision, and life insurance, 401k with match, PTO, bonus potential, and tuition reimbursement, • Long term career stability in aerospace manufacturing ONLY apply if you have hands on CNC lathe experience and can consistently hold tight tolerances in a fast paced precision manufacturing environment. Apply today and build a career where your skills are valued If you meet the above qualifications, please click APPLY NOW and upload your most current resume or you may email your resume to Barry Tacktill at barry.tacktill@adeccona.com THANK YOU IN ADVANCE FOR APPLYING, HOWEVER, ONLY QUALIFIED CANDIDATES WILL BE CONTACTED Pay Details: $20.00 to $36.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description2nd Shift CNC Horizontal Lathe MachinistNew Britain, CT (On-Site) $24 – $36 per hour Full-Time | Monday–Friday, 3:00 PM – 11:30 PM Position OverviewThe 2nd Shift CNC Horizontal Lathe Machinist is responsible for setting up and operating CNC horizontal lathe equipment under the direction of the CNC Supervisor. This role ensures efficient production, maintains high-quality standards, and supports continuous improvement initiatives within the department.Essential Job Functions • Set up and operate CNC horizontal lathe equipment, including Nakamura machines, • Interpret blueprints, work instructions, and use precision measuring instruments, • Independently perform setups and adjustments to maintain production efficiency, • Change and set all required tooling, • Perform first-piece and in-process inspections, • Ensure the quality of all parts produced on assigned machines, • Train and support operators within the department, • Maintain 5S standards in the CNC Lathe Department, • Conduct line walks as directed by the supervisor, • Follow all company safety rules and report unsafe conditions, • Adhere to company policies, procedures, and Employee Handbook guidelines, • Perform additional duties as assigned Additional Responsibilities, • Support company goals by reducing lead times and improving customer satisfaction, • Participate in problem-solving teams and continuous improvement initiatives, • Contribute to Kaizen events, • Prepare and present Gemba Board updates as needed Required Skills & Experience, • Minimum of 5 years of CNC setup experience, • Strong analytical and troubleshooting skills, • Knowledge of feeds and speeds, • Experience working with:, • Aluminum, • Brass, • Ledloy, • 300 series stainless steels (including 316), • 430F and 430FR stainless steel, • Basic computer literacy, • Ability to follow instructions and work independently, • Strong decision-making skills and accountability, • Ability to work effectively in a team environment, • Understanding of Lean Manufacturing principles Physical Requirements, • Ability to lift up to 50 lbs occasionally, • Frequent use of hands for tooling and machine operation, • Regular standing and walking, • Good vision, including close vision, depth perception, and ability to adjust focus #INDNBD#ZIPHartford

Job DescriptionGeneral Machinist (4305) (Direct Hire) Pay $41k-$62,400k ($20-30/hr) Location: Windsor, CT 06095 1st shift – 8am-5pm EDUCATION: High School Diploma, GED equivalency and or Trade School graduate. Experience: 1-3 years minimum Ability to speak and listen effectively to follow instructions in English. Ability to write and speak complete sentences and understand verbal and written instructions in English KNOWLEDGE: Strong machining background and the ability to effectively resolve problems. Good understanding of scheduling. Responsibilities: Operate horizontal and vertical lathes, milling and grinding machines, VTL's, Jig Bores, Bridgeport’s, rubber grinding, Prototrack, drill presses and other special shop equipment for repair of parts. Work from process travellers, blueprints, parts drawings, manuals, specifications and verbal directions to determine proper dimensions and tolerances of finished part sequence of operation, and setup requirements. Measure, mark, and scribe dimensions and reference points on material. NON-ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform all other similar or related duties as required and/or directed within own or other work areas. Initiative and Ingenuity: Use of some judgment to comply with methods and instructions making minor decisions. Physical Demand: Moderate physical demand frequently lifting or moving average weight material. Mental or Visual Demand: Continuous mental and visual attention; usually repetitive work or diversified operations requiring constant alertness or activity. Working Conditions: Good shop working conditions. Exposed to any number of elements but none present to the extent of being disagreeable. Equal Opportunity Employer / Disabled / Protected Veterans The Know Your Rights poster is available here: https://www.eeoc.gov/sites/default/files/2023-06/22-088EEOCKnowYourRights6.12.pdf The pay transparency policy is available here: https://www.dol.gov/sites/dolgov/files/ofccp/pdf/pay-transp%20EnglishformattedESQA508c.pdf For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team. AppleOne participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program. https://e-verify.uscis.gov/web/media/resourcesContents/E-VerifyParticipationPoster_ES.pdf We also consider for employment qualified applicants regardless of criminal histories, consistent with legal requirements, including, if applicable, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to applicable state and municipal Fair Chance Laws and Ordinances, we will consider for employment-qualified applicants with arrest and conviction records, including, if applicable, the San Francisco Fair Chance Ordinance. For Los Angeles, CA applicants: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. #8820 Company DescriptionThis company offers growth and a great group of people to work with.This company offers growth and a great group of people to work with.

2nd Shift CNC Machinists (Milling & Grinding | Monday–Friday | 3:30 PM – 12:30 AM | $26.00 – $34.00/hour + 15% shift differential | Benefits: Medical, Dental, Vision, Life Insurance, 401(k) with match We are seeking a skilled CNC Machinists with experience in milling and/or grinding and/or turning to join our team in a high-precision, aerospace manufacturing environment. This role involves setting up and operating CNC equipment, maintaining tight tolerances, and ensuring quality standards are met across a variety of complex parts. Key Responsibilities: Set up and operate CNC milling and/or grinding machines with minimal supervision Perform job changeovers, tool changes, and make program or offset adjustments as needed Read and interpret blueprints, GD&T, and work instructions to ensure parts meet specifications Machine a variety of metals (stainless steel, aluminum, titanium, Inconel, etc.) to tight tolerances (±.001) Use precision measuring instruments (micrometers, calipers, height gauges, indicators, etc.) to verify dimensions Perform first-piece and in-process inspections to ensure quality standards Operate multiple machines simultaneously where required Follow all safety, quality, and operational procedures Maintain accurate documentation and support continuous improvement efforts Qualifications: 3–5+ years of CNC machining experience (milling and/or grinding preferred) Experience in aerospace or high-precision manufacturing environment strongly preferred Hands-on experience with multi-axis CNC machines Familiarity with FANUC or similar CNC controls Strong understanding of GD&T and blueprint reading Experience with machine setup, changeovers, and troubleshooting Strong mechanical aptitude and mathematical skills Ability to work independently and as part of a team Excellent communication and problem-solving skills Education: High school diploma or equivalent required If you meet the above qualifications and would like to apply for this position, please click APPLY NOW and upload your most current resume or you may email your resume to our recruiter, Dee Shider at; dee.shider@adeccona.com Please include "CNC" on the subject line of any e-mail correspondence. Questions regarding this position can be addressed by emailing. Thank you in advance for applying, however, only qualified candidates will be contacted. The Adecco Group is a Fortune Global 500 company and the global leader in Human Resource Solutions. Our group connects over 700,000 associates with our business clients each day through our 6,600 offices in over 70 countries and territories around the world. We offer employment opportunities at any stage in your Professional Career. For great opportunities near you, go to www.adeccousa.com today! Equal Opportunity Employer/Veterans/Disabled. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Pay Details: $26.00 to $34.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

CNC Lathe Machinist What happens when a skilled machinist finally joins a company where precision work is respected, quality matters, and leadership invests in long term careers? A long established aerospace manufacturer is hiring experienced CNC Lathe Machinists for full time openings, right away! 1st & 2nd Shift available (Mon–Fri, 7am–3:30pm OR 4:30pm–12:30am) $$ Additional 15% shift differential for 2nd shift $$ This is a full production CNC Lathe Machinist role. Only apply if you meet the minimum requirements - you must have real CNC machining and Lathe experience. What You Will Do: • Run CNC lathes producing tight tolerance aerospace parts, • Read blueprints and work with GD&T, • Inspect parts using calipers, micrometers, height gauges, indicators, and other precision tools, • Troubleshoot issues and help keep production moving What You Need: • Minimum 3 years of CNC machining with strong CNC lathe experience required, • Ability to read blueprints, understand GD&T and hold tight tolerances, • Experience with calipers, micrometers, and precision tools, • Detail oriented mindset, Strong communication and problem solving skills What You Get: $20–$36/hour (based on experience) (additional 15% shift differential for 2nd shift) • Health, dental, vision, and life insurance, 401k with match, PTO, bonus potential, and tuition reimbursement, • Long term career stability in aerospace manufacturing ONLY apply if you have hands on CNC lathe experience and can consistently hold tight tolerances in a fast paced precision manufacturing environment. Apply today and build a career where your skills are valued If you meet the above qualifications, please click APPLY NOW and upload your most current resume or you may email your resume to Barry Tacktill at barry.tacktill@adeccona.com THANK YOU IN ADVANCE FOR APPLYING, HOWEVER, ONLY QUALIFIED CANDIDATES WILL BE CONTACTED Pay Details: $20.00 to $36.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

2nd Shift CNC Machinists (Milling & Grinding | Monday–Friday | 3:30 PM – 12:30 AM | $26.00 – $34.00/hour + 15% shift differential | Benefits: Medical, Dental, Vision, Life Insurance, 401(k) with match We are seeking a skilled CNC Machinists with experience in milling and/or grinding and/or turning to join our team in a high-precision, aerospace manufacturing environment. This role involves setting up and operating CNC equipment, maintaining tight tolerances, and ensuring quality standards are met across a variety of complex parts. Key Responsibilities: Set up and operate CNC milling and/or grinding machines with minimal supervision Perform job changeovers, tool changes, and make program or offset adjustments as needed Read and interpret blueprints, GD&T, and work instructions to ensure parts meet specifications Machine a variety of metals (stainless steel, aluminum, titanium, Inconel, etc.) to tight tolerances (±.001) Use precision measuring instruments (micrometers, calipers, height gauges, indicators, etc.) to verify dimensions Perform first-piece and in-process inspections to ensure quality standards Operate multiple machines simultaneously where required Follow all safety, quality, and operational procedures Maintain accurate documentation and support continuous improvement efforts Qualifications: 3–5+ years of CNC machining experience (milling and/or grinding preferred) Experience in aerospace or high-precision manufacturing environment strongly preferred Hands-on experience with multi-axis CNC machines Familiarity with FANUC or similar CNC controls Strong understanding of GD&T and blueprint reading Experience with machine setup, changeovers, and troubleshooting Strong mechanical aptitude and mathematical skills Ability to work independently and as part of a team Excellent communication and problem-solving skills Education: High school diploma or equivalent required If you meet the above qualifications and would like to apply for this position, please click APPLY NOW and upload your most current resume or you may email your resume to our recruiter, Dee Shider at; dee.shider@adeccona.com Please include "CNC" on the subject line of any e-mail correspondence. Questions regarding this position can be addressed by emailing. Thank you in advance for applying, however, only qualified candidates will be contacted. The Adecco Group is a Fortune Global 500 company and the global leader in Human Resource Solutions. Our group connects over 700,000 associates with our business clients each day through our 6,600 offices in over 70 countries and territories around the world. We offer employment opportunities at any stage in your Professional Career. For great opportunities near you, go to www.adeccousa.com today! Equal Opportunity Employer/Veterans/Disabled. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Pay Details: $26.00 to $34.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

2nd Shift CNC Machinists (Milling & Grinding | Monday–Friday | 3:30 PM – 12:30 AM | $26.00 – $34.00/hour + 15% shift differential | Benefits: Medical, Dental, Vision, Life Insurance, 401(k) with match We are seeking a skilled CNC Machinists with experience in milling and/or grinding and/or turning to join our team in a high-precision, aerospace manufacturing environment. This role involves setting up and operating CNC equipment, maintaining tight tolerances, and ensuring quality standards are met across a variety of complex parts. Key Responsibilities: Set up and operate CNC milling and/or grinding machines with minimal supervision Perform job changeovers, tool changes, and make program or offset adjustments as needed Read and interpret blueprints, GD&T, and work instructions to ensure parts meet specifications Machine a variety of metals (stainless steel, aluminum, titanium, Inconel, etc.) to tight tolerances (±.001) Use precision measuring instruments (micrometers, calipers, height gauges, indicators, etc.) to verify dimensions Perform first-piece and in-process inspections to ensure quality standards Operate multiple machines simultaneously where required Follow all safety, quality, and operational procedures Maintain accurate documentation and support continuous improvement efforts Qualifications: 3–5+ years of CNC machining experience (milling and/or grinding preferred) Experience in aerospace or high-precision manufacturing environment strongly preferred Hands-on experience with multi-axis CNC machines Familiarity with FANUC or similar CNC controls Strong understanding of GD&T and blueprint reading Experience with machine setup, changeovers, and troubleshooting Strong mechanical aptitude and mathematical skills Ability to work independently and as part of a team Excellent communication and problem-solving skills Education: High school diploma or equivalent required If you meet the above qualifications and would like to apply for this position, please click APPLY NOW and upload your most current resume or you may email your resume to our recruiter, Dee Shider at; dee.shider@adeccona.com Please include "CNC" on the subject line of any e-mail correspondence. Questions regarding this position can be addressed by emailing. Thank you in advance for applying, however, only qualified candidates will be contacted. The Adecco Group is a Fortune Global 500 company and the global leader in Human Resource Solutions. Our group connects over 700,000 associates with our business clients each day through our 6,600 offices in over 70 countries and territories around the world. We offer employment opportunities at any stage in your Professional Career. For great opportunities near you, go to www.adeccousa.com today! Equal Opportunity Employer/Veterans/Disabled. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Pay Details: $26.00 to $34.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

CNC Lathe Machinist What happens when a skilled machinist finally joins a company where precision work is respected, quality matters, and leadership invests in long term careers? A long established aerospace manufacturer is hiring experienced CNC Lathe Machinists for full time openings, right away! 1st & 2nd Shift available (Mon–Fri, 7am–3:30pm OR 4:30pm–12:30am) $$ Additional 15% shift differential for 2nd shift $$ This is a full production CNC Lathe Machinist role. Only apply if you meet the minimum requirements - you must have real CNC machining and Lathe experience. What You Will Do: • Run CNC lathes producing tight tolerance aerospace parts, • Read blueprints and work with GD&T, • Inspect parts using calipers, micrometers, height gauges, indicators, and other precision tools, • Troubleshoot issues and help keep production moving What You Need: • Minimum 3 years of CNC machining with strong CNC lathe experience required, • Ability to read blueprints, understand GD&T and hold tight tolerances, • Experience with calipers, micrometers, and precision tools, • Detail oriented mindset, Strong communication and problem solving skills What You Get: $20–$36/hour (based on experience) (additional 15% shift differential for 2nd shift) • Health, dental, vision, and life insurance, 401k with match, PTO, bonus potential, and tuition reimbursement, • Long term career stability in aerospace manufacturing ONLY apply if you have hands on CNC lathe experience and can consistently hold tight tolerances in a fast paced precision manufacturing environment. Apply today and build a career where your skills are valued If you meet the above qualifications, please click APPLY NOW and upload your most current resume or you may email your resume to Barry Tacktill at barry.tacktill@adeccona.com THANK YOU IN ADVANCE FOR APPLYING, HOWEVER, ONLY QUALIFIED CANDIDATES WILL BE CONTACTED Pay Details: $20.00 to $36.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

2nd Shift CNC Machinists (Milling & Grinding | Monday–Friday | 3:30 PM – 12:30 AM | $26.00 – $34.00/hour + 15% shift differential | Benefits: Medical, Dental, Vision, Life Insurance, 401(k) with match We are seeking a skilled CNC Machinists with experience in milling and/or grinding and/or turning to join our team in a high-precision, aerospace manufacturing environment. This role involves setting up and operating CNC equipment, maintaining tight tolerances, and ensuring quality standards are met across a variety of complex parts. Key Responsibilities: Set up and operate CNC milling and/or grinding machines with minimal supervision Perform job changeovers, tool changes, and make program or offset adjustments as needed Read and interpret blueprints, GD&T, and work instructions to ensure parts meet specifications Machine a variety of metals (stainless steel, aluminum, titanium, Inconel, etc.) to tight tolerances (±.001) Use precision measuring instruments (micrometers, calipers, height gauges, indicators, etc.) to verify dimensions Perform first-piece and in-process inspections to ensure quality standards Operate multiple machines simultaneously where required Follow all safety, quality, and operational procedures Maintain accurate documentation and support continuous improvement efforts Qualifications: 3–5+ years of CNC machining experience (milling and/or grinding preferred) Experience in aerospace or high-precision manufacturing environment strongly preferred Hands-on experience with multi-axis CNC machines Familiarity with FANUC or similar CNC controls Strong understanding of GD&T and blueprint reading Experience with machine setup, changeovers, and troubleshooting Strong mechanical aptitude and mathematical skills Ability to work independently and as part of a team Excellent communication and problem-solving skills Education: High school diploma or equivalent required If you meet the above qualifications and would like to apply for this position, please click APPLY NOW and upload your most current resume or you may email your resume to our recruiter, Dee Shider at; dee.shider@adeccona.com Please include "CNC" on the subject line of any e-mail correspondence. Questions regarding this position can be addressed by emailing. Thank you in advance for applying, however, only qualified candidates will be contacted. The Adecco Group is a Fortune Global 500 company and the global leader in Human Resource Solutions. Our group connects over 700,000 associates with our business clients each day through our 6,600 offices in over 70 countries and territories around the world. We offer employment opportunities at any stage in your Professional Career. For great opportunities near you, go to www.adeccousa.com today! Equal Opportunity Employer/Veterans/Disabled. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Pay Details: $26.00 to $34.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

CNC Lathe Machinist What happens when a skilled machinist finally joins a company where precision work is respected, quality matters, and leadership invests in long term careers? A long established aerospace manufacturer is hiring experienced CNC Lathe Machinists for full time openings, right away! 1st & 2nd Shift available (Mon–Fri, 7am–3:30pm OR 4:30pm–12:30am) $$ Additional 15% shift differential for 2nd shift $$ This is a full production CNC Lathe Machinist role. Only apply if you meet the minimum requirements - you must have real CNC machining and Lathe experience. What You Will Do: • Run CNC lathes producing tight tolerance aerospace parts, • Read blueprints and work with GD&T, • Inspect parts using calipers, micrometers, height gauges, indicators, and other precision tools, • Troubleshoot issues and help keep production moving What You Need: • Minimum 3 years of CNC machining with strong CNC lathe experience required, • Ability to read blueprints, understand GD&T and hold tight tolerances, • Experience with calipers, micrometers, and precision tools, • Detail oriented mindset, Strong communication and problem solving skills What You Get: $20–$36/hour (based on experience) (additional 15% shift differential for 2nd shift) • Health, dental, vision, and life insurance, 401k with match, PTO, bonus potential, and tuition reimbursement, • Long term career stability in aerospace manufacturing ONLY apply if you have hands on CNC lathe experience and can consistently hold tight tolerances in a fast paced precision manufacturing environment. Apply today and build a career where your skills are valued If you meet the above qualifications, please click APPLY NOW and upload your most current resume or you may email your resume to Barry Tacktill at barry.tacktill@adeccona.com THANK YOU IN ADVANCE FOR APPLYING, HOWEVER, ONLY QUALIFIED CANDIDATES WILL BE CONTACTED Pay Details: $20.00 to $36.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

CNC Lathe Machinist What happens when a skilled machinist finally joins a company where precision work is respected, quality matters, and leadership invests in long term careers? A long established aerospace manufacturer is hiring experienced CNC Lathe Machinists for full time openings, right away! 1st & 2nd Shift available (Mon–Fri, 7am–3:30pm OR 4:30pm–12:30am) $$ Additional 15% shift differential for 2nd shift $$ This is a full production CNC Lathe Machinist role. Only apply if you meet the minimum requirements - you must have real CNC machining and Lathe experience. What You Will Do: • Run CNC lathes producing tight tolerance aerospace parts, • Read blueprints and work with GD&T, • Inspect parts using calipers, micrometers, height gauges, indicators, and other precision tools, • Troubleshoot issues and help keep production moving What You Need: • Minimum 3 years of CNC machining with strong CNC lathe experience required, • Ability to read blueprints, understand GD&T and hold tight tolerances, • Experience with calipers, micrometers, and precision tools, • Detail oriented mindset, Strong communication and problem solving skills What You Get: $20–$36/hour (based on experience) (additional 15% shift differential for 2nd shift) • Health, dental, vision, and life insurance, 401k with match, PTO, bonus potential, and tuition reimbursement, • Long term career stability in aerospace manufacturing ONLY apply if you have hands on CNC lathe experience and can consistently hold tight tolerances in a fast paced precision manufacturing environment. Apply today and build a career where your skills are valued If you meet the above qualifications, please click APPLY NOW and upload your most current resume or you may email your resume to Barry Tacktill at barry.tacktill@adeccona.com THANK YOU IN ADVANCE FOR APPLYING, HOWEVER, ONLY QUALIFIED CANDIDATES WILL BE CONTACTED Pay Details: $20.00 to $36.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

2nd Shift CNC Machinists (Milling & Grinding | Monday–Friday | 3:30 PM – 12:30 AM | $26.00 – $34.00/hour + 15% shift differential | Benefits: Medical, Dental, Vision, Life Insurance, 401(k) with match We are seeking a skilled CNC Machinists with experience in milling and/or grinding and/or turning to join our team in a high-precision, aerospace manufacturing environment. This role involves setting up and operating CNC equipment, maintaining tight tolerances, and ensuring quality standards are met across a variety of complex parts. Key Responsibilities: Set up and operate CNC milling and/or grinding machines with minimal supervision Perform job changeovers, tool changes, and make program or offset adjustments as needed Read and interpret blueprints, GD&T, and work instructions to ensure parts meet specifications Machine a variety of metals (stainless steel, aluminum, titanium, Inconel, etc.) to tight tolerances (±.001) Use precision measuring instruments (micrometers, calipers, height gauges, indicators, etc.) to verify dimensions Perform first-piece and in-process inspections to ensure quality standards Operate multiple machines simultaneously where required Follow all safety, quality, and operational procedures Maintain accurate documentation and support continuous improvement efforts Qualifications: 3–5+ years of CNC machining experience (milling and/or grinding preferred) Experience in aerospace or high-precision manufacturing environment strongly preferred Hands-on experience with multi-axis CNC machines Familiarity with FANUC or similar CNC controls Strong understanding of GD&T and blueprint reading Experience with machine setup, changeovers, and troubleshooting Strong mechanical aptitude and mathematical skills Ability to work independently and as part of a team Excellent communication and problem-solving skills Education: High school diploma or equivalent required If you meet the above qualifications and would like to apply for this position, please click APPLY NOW and upload your most current resume or you may email your resume to our recruiter, Dee Shider at; dee.shider@adeccona.com Please include "CNC" on the subject line of any e-mail correspondence. Questions regarding this position can be addressed by emailing. Thank you in advance for applying, however, only qualified candidates will be contacted. The Adecco Group is a Fortune Global 500 company and the global leader in Human Resource Solutions. Our group connects over 700,000 associates with our business clients each day through our 6,600 offices in over 70 countries and territories around the world. We offer employment opportunities at any stage in your Professional Career. For great opportunities near you, go to www.adeccousa.com today! Equal Opportunity Employer/Veterans/Disabled. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Pay Details: $26.00 to $34.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionWelcome to Turbine Controls MRO Step into a realm where aviation meets innovation. At Turbine Controls MRO, a part of VSE Aviation, our heritage guides us as a pioneering figure in aviation maintenance and overhaul since more than four decades. Based in Bloomfield, Connecticut and Miramar, Florida, we're at the frontier, servicing diverse clients from OEMs to government sectors with unmatched dedication. Your Role What it Entails: As a Precision Aviation Component Technician, you will weave your technical prowess into essential aviation repairs. Charged with the responsibility of fabricating and modifying aviation accessories, you'll master the art of machinery to bring concepts to life. You'll adhere to FAA-approved guidelines while balancing precision tasks and teamwork with our dedicated Quality Assurance and Engineering units. Your Purpose Includes: • Expertly programming and setting up CNC machines, ensuring every detail adheres to technical specifications., • Reading and interpreting engineering drawings with astute comprehension, turning theory into practice., • Carefully documenting all maintenance in line with FAA protocols and company standards., • Ensuring each component meets our stringent quality criteria before they take to the skies again., • Collaborating to resolve discrepancies and ensure seamless operations. What You Bring:, • Substantial machinist experience across seven years or equivalent educational credentials., • Deep familiarity with aircraft components and necessary machining processes., • Readiness to adapt and thrive in a dynamic, fast-paced environment., • A sharp eye for detail, organizational aptitude, and effective management of time. A reminder that a thorough background check and drug screening are part of our hiring process.

Job Description Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards. This role is for 1st or 2nd shift. 1st shift is 7am-3:30. 2nd shift is 3:00 - 11:30pm This role is 100% in office at our plant in East Hartford, CT. 2nd Shift has a 10% shift differential At HORST we offer a variety of benefits including but not limited to: • Competitive PTO Package, • Paid Company Holidays, • 401K Match Program, • Medical, Dental, Vision Benefits, • Tuition Reimbursement/Assistance Program Major Areas of Responsibility: • Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g. Eurotech, Hardinge, etc.), • Will work with blueprints, operation sheets, and other work instructions., • Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part., • Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area., • Performs complex set-ups of own work or for others., • Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary., • Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators., • Ensures that all manufactured parts are in full compliance to quality standards., • Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department., • Replaces all worn or damaged tooling as necessary., • Verifies and records actual part count, both prior to and upon completion of all work, • Performs all routine maintenance on the equipment and maintains all fluid levels., • Keeps the equipment and work area clean and organized., • Returns excess bar stock or material to the staging area., • Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap., • Notifies lead person or supervisor of any parts shortages or machining problems/difficulties., • Packs and washes/preserves parts as needed., • Performs other machining and assembly operations as needed., • Performs other related duties as required., • Interacts with associates from all departments. Requirements: • High School diploma or equivalent. Technical school training a plus., • 3 years of set-up experience minimum required, • Experience with aerospace products and/or other close tolerance parts is a plus., • Must be familiar with Fanuc and/or Okuma Controls, • Must be able to set and change tools., • Must be able to use standard gauges and inspection techniques., • Experience with SPC, inspection documentation, and problem solving is a plus., • Strong interpersonal and analytical skills., • Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork., • Must be able to read CNC programs., • Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: • Ability to push/pull/carry up to 50 lbs., • Able to stand for up to 8+ hours.

Job Description This Grinding Set-Up Operator/Machinist will primarily set-up and operate CNC cylindrical (O.D) grinders (e.g. Kellenberger, Studer, etc.) to produce high precision parts made from a variety of materials. In this role, you will ensure that all manufactured parts are in full compliance with quality standards and customer specifications. This role is for 1st or 2nd shift. 1st shift is 7am-3:30. 2nd shift is 3:00 - 11:30pm This role is 100% in office at our plant in East Hartford, CT. 2nd Shift has a 10% shift differential At HORST we offer a variety of benefits including but not limited to: • Competitive PTO Package, • Paid Company Holidays, • 401K Match Program, • Medical, Dental, Vision Benefits, • Tuition Reimbursement/Assistance Program Major Areas of Responsibility: • The setup and operation of CNC cylindrical grinders (e.g. Kellenberger, Studer, Jones & Shipman, Hauser, Clausing, etc.), • Working from blueprints, operation sheets, travelers or other specifications, this person sets-up and completes the machining operations to produce high precision parts., • Performs complex setups including fixturing, wheel selection, and dressing, for self and others. Operates equipment as needed., • Creates CNC programs on the machine and edits programs as necessary. Selects grinding wheels, tooling, gages, and other equipment as needed., • Assists other Operators with setup or production problems., • Ensures that all manufactured parts are in full compliance with quality standards. Uses measuring instruments and gages to perform dimensional and visual inspections on close tolerance parts., • Performs all routine maintenance on the equipment., • Performs other related duties as required, including centerless grinding (in-feed and thru-feed) on equipment such as Cincinnati and Royal Master grinders., • Packs and cleans parts as needed., • Performs other machining and assembly operations as needed. Requirements: • High School diploma or equivalent. Technical school training a plus., • Five plus years of increasingly diverse experience in a machine shop or CNC machining environment, • Ability to set up CNC cylindrical grinders (e.g. Kellenberger, Studer, etc.), • Experience with centerless grinding (Cincinnati, Royal Master, etc.), pinch-peel grinding (e.g. Rollomatic, ANCA, etc.) is a plus., • Experience with manual cylindrical grinders (e.g. Brown & Sharpe, etc.) is a plus., • Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork. Physical Requirements: • Ability to push/pull/carry up to 50 lbs., • Able to stand for up to 8+ hours

Job Description Position: CNC Machinist (Large-Parts) Shift: 2nd Hour: 3:30pm - Midnight Type: Full-Time Mode: Direct Placement Pay Range:$24-33 Industry: Manufacturing Our client is looking for a responsible CNC Machinist (large parts). This a permanent / direct placement position with our key manufacturing client. To be considered for this role, you will need a High School diploma or equivalent as well as 2-3 years of experience with CNC Lathe / Turning, CNC Swiss. Principle Duties • Set up and operate CNC Machining Centers., • Performs Machine Adjustments and Troubleshoots Controllers / Machines / Processes. Works from Blueprint Requirements., • Selects Tools, Sets Feeds and Speeds., • Perform Inspection of Machined Parts using Precision Hand Tools. Able to work Independently with minimal supervision., • Must be able to lift up to 70 lbs. Operates Overhead Cranes for Large-Part Manufacturing., • Maintains a clean work environment and Shop Floor (Tools, Equipment, Machines, etc.), • Re-orders Tools as needed. Requirements • 2-3 Years of Experience with CNC Milling, CNC Lathe / Turning, CNC Swiss, • High School Diploma OR GED OR Vocational School Training Must be able to lift up to 70 lbs., • Perform Inspection of Machined Parts using Precision Hand Tools. BestLogic Staffing is a Top Staffing Firm that's partnered with some of the largest names in various industries. Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore! Learn about our Process or to speak to a Recruiting Professional directly, call 1-866-585-8055. BestLogic Staffing is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. Your Right to Work In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.

Job Description Position: CNC Operator / Machinist Shift: 2nd Hours: 3:30pm midnight. Type: Full-Time Mode: Direct Placement Pay Range:$21-28 Industry : Manufacturing Our client is looking for a responsible CNC Operator/Bending 2nd is a Direct Placement position with our key manufacturing client. To be considered for this role, you will need a minimum of 2-3 years CNC machining experience and High school graduate or equivalent. Principle Duties Set up and operate bending, laser cutting, and punching machines. Assist in debugging operating or programming problems with high laser cut quality part Participate in daily shop floor management meeting and be an active member of SYNCHRO Plus activities (SFM, TK, IK). Maintaining equipment and supplies Maintain quality and safety standards Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T) Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards. · Maintains safe operations by adhering to safety procedures and regulations. Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Documents actions by completing production and quality logs. Requirements Conceptual Skills, Process Improvement, Verbal Communication, Functional and Technical Skills, Controls and Instrumentation, Supply Management, Tooling, Coordination, Inventory Control, Attention to Detail, Judgment High School Diploma or GED Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. BestLogic Staffing is a Top Staffing Firm that's partnered with some of the largest names in various industries. Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore! Learn about our Process or to speak to a Recruiting Professional directly, call 1-866-585-8055. BestLogic Staffing is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. Your Right to Work In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.

Job Description Manufacturing – Machinist II (Mill) | Direct Hire | Superior Skilled Trades 📍 Location: South Windsor, CT 💰 Hourly Rate: $28–$32/hour 🎯 Annual Performance Bonus Eligible 🕒 Schedule: 1st Shift (7:00 AM – 3:30 PM), Monday–Friday | Overtime Available Weekly Hours: Full-time Company Overview Superior Skilled Trades is partnered with a company that is a global manufacturer of complex aircraft engine components, recognized for its commitment to continuous improvement, precision manufacturing, and exceptional customer service. The organization is built on a strong foundation of teamwork, innovation, and operational excellence, with a focus on delivering high-quality, on-time aerospace solutions to customers worldwide. Position Overview This is a Direct Hire Opportunity. As a Machinist II (Mill), you will operate and set up CNC milling machines, including 3-axis and 5-axis CNC mills, to produce precision aerospace components. You will be responsible for machine setup, program adjustments, inspection, and ensuring all parts meet blueprint and quality specifications. This role requires 5+ years of CNC milling experience and the ability to work independently in a cellular manufacturing environment. Key Responsibilities • Set up and operate CNC milling machines and related equipment, • Work with 3-axis and 5-axis CNC mill machines, • Make program edits and adjustments to ensure part accuracy, • Operate multiple machines in a cellular production environment, • Interpret blueprints, sketches, and work orders, • Apply proper feeds, speeds, and tooling selection, • Inspect parts to ensure dimensional and quality compliance, • Maintain accurate production records (counts, scrap, time, etc.), • Perform routine machine maintenance and coolant system upkeep, • Maintain clean, organized work areas and follow safety standards, • Assist and support less experienced operators as neededQualifications, • High School Diploma or GED required, • Minimum 5 years CNC machining (milling experience required), • Experience with 3-axis and 5-axis CNC machines, • Ability to work independently with minimal supervision, • Strong mechanical aptitude and troubleshooting ability, • Ability to read and interpret blueprints and technical drawings, • Must be legally authorized to work in the U.S. without sponsorship, • Must comply with ITAR/EAR regulationsBenefits, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off (PTO) and company holidays, • Flexible spending accounts (FSA), • Employee assistance program (EAP), • Disability and life insurance options, • Shift stability with overtime opportunities, • Annual performance bonus eligibilityPhysical Requirements, • Ability to stand, walk, and work in a manufacturing environment for extended periods, • Must be able to lift and carry up to 15 lbs regularly, • Manual dexterity and attention to detail for precision machining work, • Must wear required PPE in a production environmentINDH Powered by JazzHR 8inZ6mpeSs

Job Description Enjet Aero machines and fabricates complex jet engine parts, components, and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: The CNC Machinist performs detailed machine setups, has G & M code knowledge, and is able to run parts with little to no supervision. The night shift pays a 20% shift premium. Essential Responsibilities: • Efficiently set up, maintain and operate vertical and horizontal multi-axis milling and turning machines to produce high quality precision aerospace components without supervision., • Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machine., • Maintain work areas and equipment in a clean and orderly condition., • Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc., • Able to read and interpret operation sheets and blueprints, • Develop and maintain effective working relationships with peers, supervisor, and other staff, • Other duties as directed by the supervisor including but not limited to cross training in other areas of the facility. Qualifications: • High school diploma or GED required; post-secondary CNC education preferred, • 3-5 years of CNC machine operation, • Okuma control knowledge a plus, • G & M code fluency, • Strong verbal communication and problem-solving skills, • Attention to detail and ability to deal with complexity, • Capable of working in a customer-focused, deadline-driven environment while maintaining a positive attitude, • Interested in learning with, and from, engineering and programming team to improve operations Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status, or physical challenges.

CNC Lathe Machinist What happens when a skilled machinist finally joins a company where precision work is respected, quality matters, and leadership invests in long term careers? A long established aerospace manufacturer is hiring experienced CNC Lathe Machinists for full time openings, right away! 1st & 2nd Shift available (Mon–Fri, 7am–3:30pm OR 4:30pm–12:30am) $$ Additional 15% shift differential for 2nd shift $$ This is a full production CNC Lathe Machinist role. Only apply if you meet the minimum requirements - you must have real CNC machining and Lathe experience. What You Will Do: • Run CNC lathes producing tight tolerance aerospace parts, • Read blueprints and work with GD&T, • Inspect parts using calipers, micrometers, height gauges, indicators, and other precision tools, • Troubleshoot issues and help keep production moving What You Need: • Minimum 3 years of CNC machining with strong CNC lathe experience required, • Ability to read blueprints, understand GD&T and hold tight tolerances, • Experience with calipers, micrometers, and precision tools, • Detail oriented mindset, Strong communication and problem solving skills What You Get: $20–$36/hour (based on experience) (additional 15% shift differential for 2nd shift) • Health, dental, vision, and life insurance, 401k with match, PTO, bonus potential, and tuition reimbursement, • Long term career stability in aerospace manufacturing ONLY apply if you have hands on CNC lathe experience and can consistently hold tight tolerances in a fast paced precision manufacturing environment. Apply today and build a career where your skills are valued If you meet the above qualifications, please click APPLY NOW and upload your most current resume or you may email your resume to Barry Tacktill at barry.tacktill@adeccona.com THANK YOU IN ADVANCE FOR APPLYING, HOWEVER, ONLY QUALIFIED CANDIDATES WILL BE CONTACTED Pay Details: $20.00 to $36.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDirect Hire 2nd shift CNC Machinist Location: Farmington, CT Hours: 3:30pm - 12:00am (Monday–Friday + OT as needed) MUST be able to train on 1st shift 7am to 3:30 pm Pay: $28 - 40 per hour based on experience (15 % shift differential once on 2nd) FULL BENEFITS PACKAGE! Position Overview KELLY is seeking an experienced CNC Machinist to join our team on 2nd shift. This role is responsible for setting up and machining large components that support assembly operations, ensuring high-quality output while meeting production timelines and efficiency standards. Key Responsibilities • Set up and machine large parts while maximizing machine utilization and productivity, • Perform quality inspections on weldments and machined components, • Read and interpret complex CNC programs, including G & M codes, • Make offset adjustments, wear corrections, and zero-point shifts as needed, • Use precision measuring tools such as micrometers, gauges, and calipers to verify part accuracy, • Read and interpret advanced blueprints and technical drawings, • Maintain clean and organized work areas in accordance with company standards, • Follow all safety procedures and guidelines, • Accurately document machining processes and production data, • Collaborate with team members to meet production and quality goalsQualifications, • Minimum of 4 years of CNC machining experience (large parts preferred), • Strong knowledge of CNC setup and operation, • Ability to read and understand G & M code, • Experience making offsets and machine adjustments independently, • Proficient with precision measuring instruments, • Strong blueprint reading skills, including complex drawings, • High attention to detail and commitment to quality, • Technical education or machining certification is a plus, • Ability to work effectively in a team-oriented, fast-paced environmentWhat We Offer, • Competitive pay based on experience, • Full benefits package (medical, dental, vision, etc.), • Stable, direct-hire opportunity, • Growth potential within a high-performance manufacturing environment Interested? Apply today! Use this link to schedule an interview directly on my calendar https://calendly.com/dans465 As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Put your skills to work. There are a lot of different light industrial jobs out there. Kelly® Professional & Industrial recruiters are focused on only offering opportunities with companies that provide competitive pay, safe work environments, and cultures that recognize your value. Whether you’re looking for flexible shifts, performance bonuses, or a progressive work culture-we’re dedicated to finding the very best opportunities for you. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job DescriptionKelly Services is hiring a CNC Setup Machinist in New Britain, CT! Join a precision manufacturing team producing complex machined components for the aerospace, commercial, and medical industries. This role is ideal for experienced machinists with strong setup, troubleshooting, and inspection skills. What You’ll Do • Set up and operate CNC machines for production runs, • Interpret blueprints, routings, and technical work instructions, • Adjust tooling, offsets, and machine settings as needed, • Perform in-process inspections to ensure tight tolerances are met, • Troubleshoot machining and setup issues during production, • Maintain accurate production and inspection documentation, • Support safe, clean, and organized manufacturing operations What You’ll Bring • 5+ years of CNC machining and setup experience required, • Strong blueprint reading and inspection skills, • Experience working with tight tolerances, • Proficiency using precision measuring equipment, • Strong troubleshooting and problem-solving abilities, • Ability to manage multiple setups and production priorities, • Experience in aerospace machining preferred Schedule & Pay • Monday-Friday | 7:00AM-3:30PM | Full-Time, • $25.00–$33.00/hr DOE, • Temp-to-Hire Benefits • 401(k) with company match, • Medical, dental, and vision insurance, • Life insurance, • Paid time off, • Stable, long-term opportunity in a precision manufacturing environment If you have experience in CNC setup, machining, or aerospace manufacturing, apply today and join a team producing precision machined components for critical industries. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description The CNC Operator Machinist will be responsible for operating lathe and milling machines within a medium-sized production team. This role requires moderate independence, focusing primarily on machine operation, setup, and routine maintenance tasks, ensuring product quality and efficient workflow. Responsibilities • Set up lathe and milling CNC machines according to specifications, • Operate CNC machines to produce high-quality components, • Conduct quality inspections to verify conformance with blueprints, • Perform weekly machine maintenance and tool calibration, • Read and interpret blueprints for machining requirements, • Handle materials and manage workflow efficiently, • Troubleshoot minor machine issues to minimize downtime Required Qualifications • Minimum 2 years of experience in CNC machiningCompany DescriptionBOSS ProStaffing helps find the best local talent for some of the most reputable companies in the area. We strive to find the best possible fit for each candidate that truly wants to work. Everyone wants a job but do you want to work? If so, let us help you in your job search today!BOSS ProStaffing helps find the best local talent for some of the most reputable companies in the area. We strive to find the best possible fit for each candidate that truly wants to work. Everyone wants a job but do you want to work? If so, let us help you in your job search today!

Job Description CNC Milling Machinist – Setup & Operator Greater Hartford Area, CT (Onsite) Full-Time | $30-$35/hour + OT Potential Well-established precision manufacturing organization is seeking an experienced CNC Milling Machinist to join its growing operation. This is a hands-on role focused on setup, operation, and production of tight-tolerance machined components in a fast-paced manufacturing environment. Responsibilities: • Setup and operate CNC milling machines, • Read and interpret blueprints, drawings, and specifications, • Perform in-process and final inspections on machined parts, • Troubleshoot machining issues and maintain equipment performance, • Work closely with engineering and production teams to improve processes, • Maintain a clean, organized, and safety-focused work environment Qualifications: • Previous CNC milling setup/operator experience required, • Strong blueprint reading and machining knowledge, • Ability to hold tight tolerances and maintain quality standards, • Strong troubleshooting and problem-solving abilities, • Team-oriented mindset with ability to work independently Compensation & Benefits: • $30-$35/hour depending on experience, • Health, dental, and vision insurance, • 401(k) with company match, • Paid holidays, • Stable, long-term opportunity with strong team environment Please apply directly for confidential consideration. #zip

Job Description WGPW Industrial Turbine Services Machinist Manual Vertical Turret Lathe Job Title: Manual Machinist -Vertical Turret Lathe Department: Operations Direct Reports To: Component Repair Supervisor FLSA Status: Hourly Non-Exempt Position Status: Direct Work Hours: 1st Shift 7:00AM - 3:30PM Or 2nd Shift 2:30PM-11:00PM (Includes a 15 % shift differential for second shift) SUMMARY Responsible for performing manual machining operations used in the overhaul of aerospace components in accordance with WGPW established methods and practices. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities. • Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers, vernier calipers, indicators, and swing gages., • Machine parts to specifications using machine tools such as vertical turret lathes, lathes, horizontal boring mills, vertical boring mills, milling machines, OD grinders, ID Grinders, and surface grinders., • Measures, examines, and tests completed components in order to detect defects and ensure conformance to specifications, using precision measurement equipment., • Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools in order to perform precision machining operations, including tool selection and calculation of appropriate speed and feeds., • Use and interpretation of appropriate technical data, including but not limited to travelers, blueprints and other technical data as provided., • Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes., • Communicating with Supervisors, Peers, or Subordinates -- Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person., • Getting Information - Observing, receiving, and otherwise obtaining information from all relevant sources., • Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things., • Monitor Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems., • Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors, problems, and safety non conformances., • Equipment Selection - Determining the kind of tools and equipment needed to do a job., • Troubleshooting - Determining causes of operating errors and deciding what to do about it., • Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times., • Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the Knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Possess the ability to set up and operate a Vertical Turret Lathe ( VTL) safely and effectively., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Must have good mechanical skills, a high level of manual dexterity including hand-eye coordination and the ability to accurately use precision measuring tools such as micrometers, calipers, and dial indicators., • Must be able to effectively and safely use manufacturer’s special tooling. EDUCATION and/or EXPERIENCE • High School diploma or equivalent and 3+ years of previous experience in the operation of machines and tools, including their designs, uses, repair, and maintenance., • Experience in the overhaul and repair of aviation components is a strong plus., • CNC experience is preferred but not required. PHYSICAL/ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, and use hands to finger, handle or feel objects, tools, and controls. The employee is occasionally required to walk, sit, reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee must occasionally lift and move up to 50 pounds. While performing the duties of this job, the employee may be exposed to moving mechanical parts, fumes, airborne particles, solvents, and oils. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Leppert Nutmeg in Bloomfield, CT is hiring a skilled Non-CNC Manual Machinist to support the repair and refurbishment of industrial electric motors, generators, and related components. This position is ideal for a machinist with strong manual lathe experience who takes pride in precision work, especially in repair and rebuild applications. What You'll Do • Operate manual machining equipment including engine lathes, horizontal lathes, knee mills, drill presses, grinders, and saws, • Perform turning, boring, threading, drilling, tapping, and milling operations, • Restore components to OEM specifications (sleeving IDs, skim cutting shaft ODs, re-centering, shaft repair, and keyway milling), • Machine new shafts and components from samples using materials such as 1045, 4140, 4340, A36 steel, bearing bronze, and 6061 aluminum, • Support motor and generator repair, including machining, balancing, and component prep, • Perform tool-post grinding, broaching, and commutator undercutting, • Complete basic metallizing (metal spraying) and mid-level welding, brazing, and soldering, • Use overhead cranes, forklifts, and rigging equipment safely, • Hold tight tolerances (.0001") using micrometers and precision measuring tools, • Measure TIR and indicate parts accurately in a 4-jaw chuck, • Read blueprints and follow job specifications, • Maintain documentation, safety standards, and a clean work environment Experience You Bring • 7+ years of manual machining on horizontal engine lathes, including 4-jaw chuck work, • 3+ years operating traditional knee mills, • Experience with large manual lathes (10"–40" swing, 60"–120" between centers), • Strong background in repair machining and rebuilding components to original/OEM specs What We're Looking For • 3+ years as a manual machinist (non-CNC), ideally in industrial repair or motor shops, • Associate degree in Machine Tool Technology (preferred) or equivalent experience, • Strong knowledge of machining practices and metal behavior, • Skilled with micrometers, calipers, and dial indicators, • Welding, brazing, and soldering experience (intermediate level), • Mechanically inclined, detail-oriented, and dependable, • Able to work independently and as part of a team, • Willing to work overtime when needed Physical Requirements • Stand, bend, and move throughout the shift, • Lift up to 50 lbs regularly, • Strong visual acuity for precision measurements What We Offer • Competitive pay, • Paid time off, • 401(k) with company match, • Medical, dental, and vision insurance, • Ongoing training and advancement opportunities

Job Description Overview Are you a skilled Milling/CNC Machinist looking to take your career to the next level? Join our dynamic team in Windsor, CT, where innovation meets precision. In this role, you will be responsible for operating and programming CNC machines to produce high-quality components that meet our clients' specifications. If you have a passion for machining and a keen eye for detail, we want to hear from you! Responsibilities • Set up and operate CNC milling machines to produce precision parts., • Read and interpret blueprints, technical drawings, and specifications., • Conduct quality checks on finished products to ensure they meet specifications., • Perform routine maintenance on machines and troubleshoot issues as they arise., • Collaborate with engineering and production teams to optimize machining processes., • Maintain a clean and organized work environment, adhering to safety protocols. Qualifications • High school diploma or equivalent; technical degree in machining or related field preferred., • Proven experience as a CNC machinist, with a strong understanding of milling operations., • Proficiency in reading and interpreting technical drawings and blueprints., • Strong attention to detail and commitment to producing high-quality work., • Ability to work independently and as part of a team in a fast-paced environment., • Excellent problem-solving skills and a proactive approach to challenges. Physical Requirements: Ability to stand for extended periods and perform repetitive tasks. Manual dexterity to handle small parts and tools. Capability to lift up lift to 50 pounds as needed. Benefits Health insurance 401(k) matching Vision insurance Dental insurance Paid holidays You should be proficient in: • G-Code, • CNC Machine Setup & Changeover, • Advanced Inspection & Gauge Measurement, • Machine Setups for Production Runs Machines & technologies you'll use: • CNC Mill (3-4 axis VMC) (Makino, Okuma, Haas), • CNC Lathe (2-4 axis) (Okuma, Haas, Dmg Mori Seiki), • CNC Mill (5+ axis VMC) (Haas, Okuma), • CNC Lathe (5+ axis) (Index, Okuma, Dmg Mori Seiki)

Job DescriptionMaintenance Supervisor (Machinist / Toolmaker) Location: Farmington, CT Salary: $90,000 - $100,000/year Hours: 7 am – 3:30 pm We have an exciting opportunity for a Maintenance Department Supervisor to work onsite at our client. In this role, you’ll oversee machine maintenance and repair operations in a manufacturing environment. This role supervises maintenance technicians, performs hands-on machining and mechanical repair, manages work orders, and trains apprentices while ensuring safe and efficient operation of production equipment. Responsibilities • Supervise maintenance technicians and apprentices; assign work and provide hands-on training, • Oversee repair, rebuilding, and installation of production machinery, • Troubleshoot mechanical issues and perform equipment dismantling and reassembly, • Perform machining tasks including designing, fabricating, grinding, and repairing machine parts, • Build small tools or equipment as needed to support production, • Use Manager Plus CMMS to manage work requests, create work orders, and maintain asset records, • Maintain MRO inventory, purchase repair parts, and manage spare components, • Ensure compliance with OSHA safety standards, including Lockout/Tagout and rigging practices, • Support preventative maintenance and equipment reliability effortsQualifications & Requirements, • Machinist or Toolmaker Journeyman certification required in order to train and mentor apprentices, • 3–5 years of maintenance supervisory experience required, • Strong mechanical troubleshooting and machining experience, • Experience repairing power press machines is a plus, • Working knowledge of OSHA regulations, Lockout/Tagout, and rigging procedures, • Experience using CMMS or maintenance management systems, • Computer literate, • Reliable attendance is an essential function of the position#IND2

Job Description Kamatics is seeking Machinists (2nd Shift) across multiple experience levels (III, IV, and V) to join our team in Bloomfield, CT. This role supports the production of high-precision aerospace components by setting up, operating, and troubleshooting CNC machining equipment in a dynamic manufacturing environment. Candidates may range from experienced machinists building on foundational skills to highly skilled machinists capable of independently performing complex setups, optimizing machining processes, and supporting others on the team. About Kamatics: Kamatics is a global leader in high-performance bearings and engineered tribological solutions for aerospace, defense, and industrial applications. Our team develops self-lubricating bearings and precision components that deliver durability, reliability, and performance in the harshest environments. We take pride in engineering excellence, collaborative problem solving, and a culture built on innovation and customer trust. Key Responsibilities: • Set up, operate, adjust, and troubleshoot CNC machine tools to perform progressive machining operations, • Execute machining operations including drilling, boring, milling, turning, honing, threading, and related processes within machine capabilities, • Work from programs, operation sheets, blueprints, and setup instructions to execute precision machining processes, • Manage tooling, fixturing, material clamping, offsets, and console settings to ensure part accuracy and repeatability, • Verify parts for conformance to engineering drawings and GD&T requirements using appropriate inspection methods, • Identify and resolve machining, tooling, or program-related issues to maintain quality and productivity, • Maintain production documentation and follow all safety, quality, and environmental procedures, • Support continuous improvement initiatives to improve efficiency, reduce scrap, and enhance overall quality, • Maintain a clean, safe, and organized work environment Additional Responsibilities (Based on Experience Level) • Perform full machine setups independently on complex parts and multi-axis CNC equipment, • Validate and prove out programs; make adjustments to optimize cycle times, quality, and machining performance, • Troubleshoot advanced machining processes, tooling, and programming issues, • Provide technical guidance and training to less experienced machinists, • Identify and implement process improvements across operations Qualifications Education • High school diploma or GED required, • Machining or technical training certificate preferred Experience • 1-5+ years of CNC machining experience in a manufacturing environment, • Experience level, scope of responsibility, and complexity of work will vary based on candidate background Skills & Knowledge • Understanding of CNC machining principles, processes, and best practices, • Ability to read and interpret blueprints and GD&T requirements, • Proficiency in shop math and precision measurement tools, • Experience with CNC machine operations, including offsets (geometry and wear), dry runs, and program adjustments, • Strong troubleshooting and problem-solving skills, • Ability to work independently and collaboratively in a team environment Benefits: At Kamatics, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. Kamatics is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources. This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a “U.S. person” as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws. (This position is intended to support multiple machinist levels (III, IV, and V). Level and compensation will be determined in alignment with each candidate’s experience, technical knowledge, and demonstrated proficiency as assessed during the interview process.) 3:15 PM – 12:45 AM, Monday through Friday Includes one hour of mandatory daily overtime based on current business needs

Job Description Your Expertise: • 5 years of experience in an aerospace or high precision manufacturing environment preferred., • 3 years of experience operating CNC multi-axis Milling machine preferred., • Surface grinding experience, • Knowledge of FANUC or CNC controls, • Experience setting up and changing over jobs on CNC equipment., • Exceptional mechanical ability and strong mathematical skills., • Excellent communication skills and problem-solving ability with demonstrated ability to work collaboratively to solve complex issues. Is your expertise different from the above? If you have a good attitude and a willingness to learn and new trade or skill, we want to hear from you. Apply today! Your Challenge: • Set up and operate complex milling jobs with minimal supervision ensuring part conforms to specifications and requirements., • Make necessary modifications or adjustments., • Read and understand standard and geometric tolerances on blueprints and work instructions/operations sheets., • Verify dimensions using standard measuring instruments, such as micrometers, depth gages, height gages and dial calipers., • Hold tight tolerances associated with the machining of precision parts., • Work from established practices and overhaul manual instructions and procedures to perform a variety of duties to prepare parts for subsequent operations. Education Requirements: • High school diploma or equivalent required. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) #ZR

Job Description Position Details: 2nd Shift Monday-Friday 3:30pm-12:00am Your Expertise: • 3-10+ years of previous machining experience, • Ability to use hand tools, measuring instruments, and gauges to ensure proper setups and machining operations, • Ability to operate multiple machines at the same time, • Basic machining principles, • GD&T, • Excellent oral and written communication, • Exceptional interpersonal skills, • Strong analytical skills to analyze and resolve difficult problems effectively and implement long-term solutions, • Excellent organizational skills Is your expertise different from the above? If you have a good attitude and a willingness to learn and new trade or skill, we want to hear from you. Apply today! Your Challenge: • Work independently with/without minimal direction of senior personnel in functional area, • Follows established quality and safety standards., • Receive work instructions, operation sheets, setup sheets, 1st piece and in-process check sheets from department supervision indicating such information as part and operation number to be performed, • Read and interpret dimensional drawings, tool setup sheets and manufacturing instructions in performing required machining operations., • Operate various types of computer numeric controlled production machines in the machining of forgings made from various types of metal such as stainless steel, aluminum, chrome-nickel, Inconel, titanium, etc.; Machine forgings to close tolerance, e.g. +/- .001; operate multiple machines at the same time., • Perform basic machine setup with/without minimal direction from senior personnel in functional area, • Load and unload pieces manually or with hoist; Apply coolant lubricant and change worn or damaged tools as required, • Use precision or standard measuring devices such as inside and outside micrometers, dial indicators, Vernier scales, fixed frame gauges or special gauges, profilometers, etc. to check machined dimensions and surface finishes conforming to customer prints and/or specifications, • Exercise care in handling of material after and after the machining operation, • Other duties as assigned, • Authority to perform all tasks/activities responsible for Education Requirements: • High school diploma or equivalent required. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) #zr

Job DescriptionSenior CNC Machinist – Mazak Lathe (Aerospace) • $27–$33/hr | 1st Shift | Contract-to-Hire | Precision Job Shop, • Experienced CNC Machinists only., • Hartford countyIf you’re strong on Mazak lathes, conversational programming, and tight-tolerance aerospace work, this shop wants your expertise.This is a low-volume, high-mix aerospace environment — not production machining. You’ll machine complex, custom parts where quality, accuracy, and problem-solving matter. WHAT YOU’LL BE DOING • Set up, program, and run Mazak CNC lathes, • Perform conversational programming and make program edits, • Machine tight-tolerance aerospace components, • Read and interpret blueprints, GD&T, and specifications, • Inspect parts using micrometers, calipers, bore gauges, and other precision tools, • Troubleshoot independently to achieve first-pass quality, • Support continuous improvement and meet production timelinesWHAT WE NEED, • 10+ years of CNC machining experience (lathe-focused), • Strong experience with Mazak controls and conversational programming, • Advanced blueprint reading and GD&T skills, • Aerospace or other high-precision machining background, • Ability to work independently with minimal supervisionWHY THIS ROLE, • $27–$33/hr, based on experience, • 1st shift stability, • Contract-to-hire with long-term potential, • Full benefits upon hire, including 401(k) with company match, • Clean, organized precision shop — quality over quantityReady for a change in 2026? If you’re a senior CNC machinist who wants challenging work and a shop that respects experience, apply now. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Job Description Job Title: CNC Machinist 1 Exempt Status: Non-Exempt Location: Newington, CT Company Description: Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager.. Essential Functions: • Machine parts to specifications using machine tools such as lathes and milling machines, • Work from blueprints, engineering instructions, and specifications, • Setup, adjust and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations, • Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Check parts to ensure that they are properly lubricated and cooled, • Measure, examine, and test completed units to defects and ensure conformance to specifications, using precision instruments such as micrometers, • Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter, • Maintain records and document in-process inspection data Required Qualifications & Experience: • Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data, • High School Degree or G.E.D, • 1+ years of experience Desired Knowledge, Skills, and Abilities • Precision Manufacturing Certificate preferred, • Must be able to read, write, understand, and speak English at a functional level, • Ability to communicate professionally and effectively with all levels of the organization, • Ability to interpret policies, procedures, and standard business practices, • Ability to read and interpret blueprints and engineering work instructions, • Ability to setup and operate CNC turning and milling machines, • Ability to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances, • Knowledge of G & M codes, • Ability to travel domestically – 10% max Physical Demands / Work Capacity Evaluation The essential functions of this position may vary based on specific assignments, work locations, and operational needs. Physical capability is evaluated through a post-offer, pre-employment Human Performance Evaluation (HPE), which assesses an individual’s ability to perform the essential functions of the job safely and effectively, with or without reasonable accommodation, in accordance with applicable laws. Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Subject to change with or without notice 1st Shift, Monday - Thursday 5:00AM - 3:30PM

Job Description Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: The CNC Machinist performs detailed machine setups, has G & M code knowledge, and is able to run parts with little to no supervision. Essential Responsibilities: • Perform machine setups quickly, accurately, and efficiently, • Operate machines to produce production runs of parts, • Able to read operation sheets and blueprints, • Develop and maintain effective working relationships with peers, supervisor, and other staff, • Other duties as directed by supervisor Qualifications: • High school diploma or GED required; post-secondary CNC education preferred, • 3+ years of CNC machine operation, • Okuma and Fanuc control knowledge a plus, • G & M code fluency, • Strong verbal communication and problem-solving skills, • Attention to detail and ability to deal with complexity, • Capable of working in a customer-focused, deadline-driven environment while maintaining a positive attitude, • Interested in learning with, and from, engineering and programming team to improve operations Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Job Description WGPW Industrial Turbine Services Machinist Manual Job Description Job Title: Manual Machinist Department: Operations Direct Reports To: Component Repair Supervisor FLSA Status: Hourly Non-Exempt Position Status: Direct Work Hours: 7:00AM - 3:30PM SUMMARY Responsible for performing manual machining operations used in the overhaul of aerospace components in accordance with WGPW established methods and practices. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities. • Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers, vernier calipers, indicators, and swing gages., • Machine parts to specifications using machine tools such as vertical turret lathes, lathes, horizontal boring mills, vertical boring mills, milling machines, OD grinders, ID Grinders, and surface grinders., • Measures, examines, and tests completed components in order to detect defects and ensure conformance to specifications, using precision measurement equipment., • Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools in order to perform precision machining operations, including tool selection and calculation of appropriate speed and feeds., • Use and interpretation of appropriate technical data, including but not limited to travelers, blueprints and other technical data as provided., • Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes., • Communicating with Supervisors, Peers, or Subordinates -- Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person., • Getting Information - Observing, receiving, and otherwise obtaining information from all relevant sources., • Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things., • Monitor Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems., • Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors, problems, and safety non conformances., • Equipment Selection - Determining the kind of tools and equipment needed to do a job., • Troubleshooting - Determining causes of operating errors and deciding what to do about it., • Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times., • Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the Knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Must have good mechanical skills, a high level of manual dexterity including hand-eye coordination and the ability to accurately use precision measuring tools such as micrometers, calipers, and dial indicators., • Must be able to effectively and safely use manufacturer’s special tooling. EDUCATION and/or EXPERIENCE • High School diploma or equivalent and 3+ years of previous experience in the operation of machines and tools, including their designs, uses, repair, and maintenance., • Experience in the overhaul and repair of aviation components is a strong plus., • CNC experience is preferred but not required. PHYSICAL/ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, and use hands to finger, handle or feel objects, tools, and controls. The employee is occasionally required to walk, sit, reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee must occasionally lift and move up to 50 pounds. While performing the duties of this job, the employee may be exposed to moving mechanical parts, fumes, airborne particles, solvents, and oils. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary This machinist will independently and safely set up and operate precision CNC ID-OD grind equipment. Essential Functions -Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. -Make tooling adjustments and program offsets as necessary. -Ability to accurately inspect work very close tolerances utilizing various instruments, including air gage, OD indicating gaging, indicators, profilometers, micrometers, height stands and verniers. -Perform daily TPM responsibilities. -Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. -Actively participate in cross-training, cost savings and team activities to improve processes. -Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies -Technical capacity -Problem-solving / analysis -Initiative -Results-driven Experience and Education -Minimum of 3 years of aerospace CNC machining experience is required. -High school diploma or equivalent required. -Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. * Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job DescriptionKelly Services is hiring a CNC Machinist (Large Parts Machining) in Farmington, CT! Join a leading manufacturing environment supporting large parts machining operations. In this role, you’ll produce high-quality components that feed directly into production while maintaining strict quality and productivity standards. What You’ll Do • Set up and operate CNC machines for large part machining, • Perform quality checks on weldments and machined components, • Read and follow blueprints, programs, and machining specifications, • Make offset adjustments and tool wear corrections as needed, • Use precision measuring tools to inspect parts, • Maintain clean and organized work areas, • Follow all safety procedures and production standards, • Document machining processes and production activity What You’ll Bring • 4+ years of CNC machining experience required, • Ability to read and interpret G & M code and complex CNC programs, • Strong blueprint reading and inspection skills, • Experience using gauges, micrometers, and precision measuring tools, • Ability to make offsets, zero-point shifts, and machine adjustments, • Strong attention to detail and commitment to quality, • Technical training or education is a plus Schedule & Pay • Training/Overlap: Monday–Friday | 7:00 AM–3:30 PM, • Permanent Schedule: 2nd Shift | 3:30 PM–12:00 AM, • $26.16–$43.22/hr DOE + 15% Shift Differential (after training), • Direct Hire | Full-Time | Benefits Benefits • Competitive pay + bonus potential, • 401(k) with company match, • Medical, dental, and vision insurance, • HSA & FSA options, • Paid time off, holidays, and sick time, • Tuition reimbursement & career growth opportunities, • Stable, long-term opportunity with a strong team environment If you have experience in CNC machining, large part manufacturing, or precision machining environments, apply today and take the next step in advanced manufacturing. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.