Trabajos simulation en Edison, New JerseyCrear alertas

Job Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work Lockheed Martin Rotary & Mission Systems is seeking a full-time Senior Radar Systems Engineer. In this role, you will lead the design, analysis, testing, and requirements development and verification of high performance Radar Signal Simulation and Processing systems. The successful candidate will have experience and/or knowledge of Radar Signal Simulation & Processing, MATLAB Simulation Development, Requirements Development and Testing and Model Based System Engineering. This position is located at a facility that requires special access and will require a government security clearance. U.S. Citizenship is required. #REAS Qualifications: • Bachelor's degree in Electrical or Computer Engineering or equivalent technical discipline, • Five or more years of Systems Engineering experience, • Experience developing system and software requirements and associated analysis and testing, • Ability to obtain & maintain a DoD Security Clearance at the SECRET level. U.S. Citizenship is required.

Job Description: What We’re Doing Here at Lockheed Martin Rotary and Mission Systems we take on the most demanding challenges in the world. We seek out innovative ideas and creative solutions to seemingly impossible problems facing our customers in the Sensors, Effectors & Mission Systems (SEMS) organization. We collaborate with the best Radar engineers in the business across the Moorestown, NJ and Syracuse, NY sites to invent solutions where they don’t exist yet. If you’re looking for the challenge of a lifetime on a team of the brightest minds in the world, then Rotary Mission Systems and the Sensor Architectures team is the place for you. If you’re looking for life-long learning and a career where the hard work is the fun part, then you’re in the right place. Lockheed Martin. Your Mission is Ours. The Work Our Radar Systems Engineering team is seeking a candidate to support architecture, design, Concept of Operations, requirements development, analysis, and implementation of high performance Active Electronically Scanned Array (AESA) radar systems. In your role as a Sensor Systems Architect, you will: • Perform concept of operations design, radar behavior definition, and associated requirements development to drive radar capability implementation across radar subsystems., • Successfully collaborate with subsystem teams to define clear, executable, and testable approaches for meeting mission success criteria, • Conduct trade studies and analyze the radar system level performance impacts to support and evaluate design decisions, • Develop and present detailed design documentation, • Represent the organization on contracts and interface with internal and external customers, program and senior leadership, and multi-disciplinary teams on significant technical matters., • Apply strong analytical and communication skills in a dynamic, multi-disciplinary environment Note: • This position requires a government security clearance; you must be a US Citizen for consideration. Who We Are Our team of Radar Systems Engineers and Sensor Architects come from diverse backgrounds and experience levels, all working together to deliver quality designs and cutting-edge capabilities to our customers. We support a broad array of Radar products and customers including the Missile Defense Agency, US Navy, Air Force, US Army, Space Force, and foreign partners including Japan, Canada, Spain, Norway, Australia, UK and more. Who You Are If you enjoy a technical challenge that will get you thinking outside the box. If you seek a collaborative environment working with motivated engineers with a diverse range of experiences and backgrounds. If you’re a lifelong learner with a passion for driving technology forward. If you’re an expert in your field looking to apply your skill to advancing sensor architectures to stay ahead of ever-evolving customer needs across a broad array of environments and threat spaces, then this is the place for you. Why Join Lockheed Martin: At Lockheed Martin we value your unique skills and expertise, and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, healthy, and fulfilling lives at and outside of work. Some of our favorite perks include: • The promotion of Work Life Balance with every Friday off (Flex 4/10 Schedule) or every other Friday off (Flex 9/80) or a 5/8 schedule., • A competitive 401k match and bonus. Explore some of the cutting‑edge technologies we support: ___ #REAS Qualifications: • Functional knowledge of radar systems and subsystems, • Demonstrated experience in one or more of the following areas: system analysis, architecture, requirements development, trade studies, modeling and simulation, or integration and test., • High proficiency in C++ or Matlab or Python

Job Description: As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. The Work Radar Systems Engineering within Rotary & Mission Systems (RMS) is seeking a candidate to support the design, integration, and test verification of high performance radar systems. The successful candidate will have strong analytic and communication skills, and work well in a dynamic, multi-disciplinary environment. The Radar Systems Engineer will: Who We Are Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Camden, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Learn more about IWSS Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: ___ #buildradars #rmshotmiljobs #REAS Qualifications: • Bachelor’s degree or higher in Electrical Engineering, Systems Engineering, Computer Science/Engineering, Physics or related STEM degree with minimum 5 years' related experience., • High proficiency in C++ or equivalent object-oriented computing language, Matlab, and, scripting languages., • Demonstrated experience in two or more of the following areas: systems engineering, software and system analysis, requirements development, verification and validation, trade studies, modeling and simulation, or integration and test., • Experience working with customers to drive complex technical issues/challenges to closure., • Ability to obtain and maintain a U.S. DoD security clearance at the SECRET level. U.S. Citizenship required.

Job Description: What We're Doing Here at Lockheed Martin Rotary and Mission Systems (RMS) we take on the biggest and baddest challenges in the world. We seek out innovative ideas and creative solutions to seemingly impossible problems facing our customers in the Integrated Warfare Systems & Sensors (IWSS) organization. We collaborate with the best Radar engineers in the business across the Moorestown, NJ and Syracuse, NY sites to invent solutions where they don’t exist yet. We keep pushing the boundaries of Electronic Protection solutions to stay ahead of the adversary in the ever-evolving game of cat-and-mouse that is Electronic Warfare. If you’re looking for the challenge of a lifetime on a team of the brightest minds in the world, then Rotary Mission Systems and the Electronic Protection team is the place for you. If you’re looking for life-long learning and a career where the hard work is the fun part, then you’re in the right place. Lockheed Martin. Your Mission is Ours. The Work In your role as a Senior Systems Engineer – Radar Electronic Protection, you will: • Develop models and/or detailed simulations to support system design evaluation., • Conduct data analysis to assess system performance., • Write verification plans and test procedures showing traceability to system and software specifications., • Support integration and test, evaluate test results, investigate discrepancies, provide technical assessment of anomalies, and drive issues to resolution., • Conduct system verification and support certification activities., • Participate in landmark reviews of Radar System products with internal and external customers, program and senior leadership, and multi-disciplinary engineering teams., • Mentor junior engineers and share knowledge of Electronic Protection concepts. Who We Are Our Electronic Protection team of systems engineers and sensor architects all working together to deliver quality designs and cutting-edge capabilities to our customers. We support a broad array of Radar products and customers including the Missile Defense Agency, US Navy, Air Force, US Army, Space Force, and foreign partners including Japan, Canada, Spain, Norway, Australia, UK and more. Radar at Lockheed Martin Who you are If you enjoy a technical challenge that will get you thinking outside the box. If you seek a collaborative environment working with other motivated engineers. If you like getting your hands dirty in architecting new designs, digging into the nuances of algorithm performance, developing novel models, supporting live testing of tactical systems, or anything in between. If you’re ready to take on the complexities of an ever-evolving adversary driving new Electronic Protection designs, then this is the place for you. Why Join Us At Lockheed Martin we value your unique skills and expertise, and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, healthy, and fulfilling lives at and outside of work. Some of our favorite perks include: Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: ___ #REAS Qualifications: • Bachelor’s degree or higher in Electrical Engineering, Computer Science/Engineering, Physics or equivalent combined with 5 years of related experience., • Functional knowledge of Radar Systems., • Demonstrated experience in one or more of the following areas: system analysis, architecture, requirements development, trade studies, modeling and simulation, or integration and test., • High proficiency in C++ or Matlab or Python., • U.S. Citizen with ability to obtain or maintain a DoD Secret level clearance.

Job Description: WHAT WE'RE DOING As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. THE WORK Radar Systems Engineering within Rotary & Mission Systems (RMS) is seeking a candidate to support the design, integration, and test verification of high performance radar systems. The successful candidate will have strong analytic and communication skills, and work well in a dynamic, multi-disciplinary environment. The Radar Systems Engineer will: WHO WE ARE Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Camden, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: ___ #buildradars #rmshotmiljobs #REAS Qualifications: • Bachelor’s degree or higher in Electrical Engineering, Systems Engineering, Computer Science/Engineering, Physics or related STEM degree with minimum 2 years' related experience., • Experience with C++ or equivalent object-oriented computing language, Matlab, and, scripting languages., • Demonstrated experience in two or more of the following areas: systems engineering, software and system analysis, requirements development, verification and validation, trade studies, modeling and simulation, or integration and test., • Ability to obtain and maintain a U.S. DoD security clearance at the SECRET level. U.S. Citizenship required.

Job Description Sharpen Your Nursing Skills at BAYADA! Our Middlesex County, New Jersey Offices are interested in a Registered Nurse who has a passion for PEDIATRIC nursing to join our Skilled Nursing team. We believe our clients and their families deserve the highest quality care delivered with compassion, excellence, and reliability. Why Choose our North Brunswick Pediatric BAYADA Office? We pride ourselves on providing an excellent onboarding and training experience from Day 1. Discuss with our Client Service Managers about a wide-range of case opportunities in your area from 1:1 in the home, 1:1 in the school, and bus runs options! The North Brunswick Pediatrics office cares for clients ranging from infant ages to 20 years old! No experience in pediatrics? We've got you covered with paid Intro to Pediatrics training in our simulation lab! Ask about our Bus Run cases available in Edison, New Jersey! All BAYADA Skilled Nurses Enjoy • Flexible scheduling based on your preferences, • Weekly pay, • Preventive Care Coverage for ALL employees (PRN included), • Short commute times – we match you with cases nearest you, • Company-paid life insurance, • Employee Assistance Program, • Career advancement and training, • One-to-one client care Benefits for full-time employees include: • Medical, dental, vision, prescription coverage, • PTO (paid vacation or sick leave), • Paid holidays, vacation, and sick leave, • 401(k) with company match, • Employer-paid life insurance, • Employee Assistance Program (EAP), • Traditional shifts (4’s, 8’s, 10’s or 12’s), • Hands-on care with only one client per day, • Building client relationships and watching their milestones, • Travel to one client home near you on a schedule you choose, • Follow up with, execute, and properly document doctors' orders, • Perform assessments and monitor clients' conditions, • Document observations, interventions, and evaluations, • Newsweek's Greatest Workplace for: Overall, Women, Parents & Families, Diversity, • Graduation from an accredited and approved nursing program, as indicated by school transcript or diploma, • Pay up to $39/hr based on qualifications Pay: $34 - $39/hr NER-CJ As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

Summary We are seeking an experienced Manufacturing Process Engineer with experience in powder-based manufacturing, with a strong chemistry background to lead and optimize manufacturing operations. This role is responsible for the design, improvement, and oversight of production processes, ensuring efficiency, quality, safety, and regulatory compliance. The ideal candidate combines hands-on plant experience with technical leadership, customer interaction, and cross-functional collaboration to drive continuous improvement across operations. Key Responsibilities • Design, develop, test, and improve mechanical systems, equipment, and process applications., • Analyze and optimize chemical and manufacturing processes to increase throughput, improve efficiency, and reduce waste., • Schedule and manage production operations involving blending, milling, drying, and screening equipment for maximum efficiency., • Lead employees across production and technical operations., • Oversee preventive maintenance and downtime activities to ensure operational reliability., • Conduct client laboratory testing, including data intake, feasibility studies, process development, optimization, and final reporting; ensure high client satisfaction., • Perform root cause analysis on process failures and implement corrective and preventive actions., • Manage operational budgets and present performance metrics and financial results to leadership., • Collaborate with operations, R&D, quality, and regulatory teams to implement new or improved processes., • Develop, maintain, and manage technical documentation, including SOPs, certifications, regulatory filings, and compliance records., • Bachelor’s degree in Chemical Engineering, Process Engineering, or a related field., • Minimum of 5+ years of process engineering experience, • Experience in powder-based manufacturing within pharmaceutical, nutraceutical, cosmetic, or chemical industries., • Hands-on experience with laboratory equipment, including particle size analyzers, microscopes, moisture balances, and scales., • Proven ability to work directly with customers and present technical findings., • Strong understanding of chemical engineering fundamentals, including fluid dynamics, thermodynamics, and heat transfer., • Knowledge of industrial electrical control panels and their integration with manufacturing equipment., • Strong regulatory background, with responsibility for maintaining FDA, DEP, EPA, cGMP, SQF, and related programs., • Proficiency with CAD and process simulation software is a plus., • Excellent analytical, problem-solving, and organizational skills.

Creates richer, more authentic professional scenarios - World-building / creative design — game designer, curriculum designer, UX researcher, simulation designer, tabletop RPG creator - Technical / data comfort — JSON familiarity, Jira/Asana power user, technical PM, data analyst, SQL/Py

Reports to: CMO, RWJ University Hospital New Brunswick; Chair, Department of Clinical Radiation Oncology, Rutgers RWJMS; CEO of RWJBarnabas Health Medical Group, or designee Position Summary: We seek Radiation Oncologist to join a team of highly trained, board-certified radiation specialists, working in a state-of-the-art facility. Position will support a busy clinical practice within the State of New Jerseys only NCI-designated Comprehensive Cancer Center. This position will support Radiation programs at Robert Wood Johnson University Hospitals in New Brunswick and Hamilton. Essential Duties and Responsibilities: Ability to function actively and collegially using an evidence-based, multidisciplinary approach, collaborating with a fulsome cancer team to deliver outstanding patient care Provide appropriate medical evaluation to each patient, including clinical treatment planning, therapeutic simulation, isodose distribution, treatment delivery and management, and provide follow-up care post treatment completion. Engage in practice-related activities, including program development, growth initiatives, and regular communication with referring physicians. Collaborate with the care team to include palliative care, psychology, social work, PT, OT, Speech, dietician, nursing, physics, and dosimetry, to ensure optimal patient outcomes. Participate in process improvement which drives standard of care across the continuum. Commit to being able, affable, and available in all professional endeavors. Understand and adhere to employer compliance standards, Corporate Compliance Policy, Code of Conduct, and Conflict of Interest Policy Minimum Education/Specialty, License/Certification: MD or equivalent Board eligible/certified Preferred Qualifications and Experience: Experience in treating Head and Neck cancers, GYN cancers, or CNS tumors is desirable. Compensation: The anticipated salary range for this position if hired to work is $400,000 to $550,000 per year. The compensation offered to the candidate selected for the position will depend on several factors, including the candidates educational background, skills, and professional experience. How to Apply: If you are interested in learning more about this position or wish to apply directly, please contact us via email at ___ Compensation Information: $400000.00 / Annually - $550000.00 / Annually

Job Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. The Work Lockheed Martin Rotary & Mission Systems is seeking a full-time Senior Radar Systems Engineer.

Role :- FPGA Design Engineer Location :- Plano, Texas (Onsite) Type :- FTE Job Description: • Senior engineer with emphasis on FPGA design, development, and testing • Develop requirements, design documentation, and test documentation • Perform VHDL analysis, develop test bench, simulation, and

OpenGL/C++ Developers Required -5+ years C++ programming -2+ years OpenGL -Graphics programming without using a commercial engine -Gaming preferred (not Unity) -Simulation experience not preferred -AAA app published to market.

Job Description WSAudiology is a global leader in the hearing aid industry. Together with our 12,000 colleagues in 130 countries, we invite you to help unlock human potential by bringing back hearing for millions of people around the world. Part of WSAudiology group, HearUSA is on a mission to reframe the world of hearing care and set the highest standard in modern hearing health. With an extensive network of 4,000 independent Hearing Care Professionals and more than 350 centers in U.S., we strive every day to provide each individual with the care, knowledge and experience they deserve. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Perform comprehensive hearing evaluation, hearing aid selection and fitting for all clients, employing best practices as defined by our client-centric service model of Simply Excellent Hearing Care. Meets minimum NPS score of 75. * Routinely demonstrates hearing aids as part of annual evaluations for clients to experience the sound and create the ‘wow’ moment of a personalized auditory simulation. * Evaluate test results in conjunction with client needs' assessment to make a personalized recommendation. Offers recommendation based on maximizing client benefits. * Perform routine follow-ups, clean and checks and hearing aid repairs. Maintain skills in ear impression taking, earmold modification and recommendation of ALD accessories. * Embody HearUSA's ambition of Changing Lives through Simply Excellent Hearing Care. Partner with the District manager, HCP Team Leads and L&D to adopt new initiatives aimed to grow your Center's revenue and change more lives. * Build a local community to proactively generate service demand and support marketing campaigns, such as to physicians and at health fairs. Successfully completes one community outreach and/or physician marketing per quarter. * Comply with all State license laws, FDA guidelines, WSA policies and HearUSA Quality Practice Guidelines (QPG). Operates in a HIPAA compliant manner, with documentation, outcome notes and referrals completed for all clients. * Engage in Continued Professional Development to maintain expertise in all aspects of service delivery, from consultative counseling to the selling, fitting and troubleshooting of current hearing aid technology. * Embraces our culture and values of Going Beyond Together, Pioneering for Better Solutions, and Passion for Impact. REQUIREMENTS: * Experience in a similar Audiology or Hearing Aid Specialist role. * Active state license in Audiology and/or hearing aid dispensing. * 1-5 years of experience preferred. * Ability to pay close attention to detail with a high degree of accuracy. * Basic or advanced written communication skills. * Experience interacting with customers/clients. * Ability to communicate detailed or technical information clearly, accurately and concisely. * Ability to work quickly, accurately and independently in a fast paced environment. A PLACE TO GROW YOUR CAREER: Growth means investing in employee development, from day-to-day support to opportunities to stretch your skills. It also means creating space for your voice, sharing knowledge, and learning from peers as we build culture and community together. You will benefit from: * A structure of field support for your hearing center * A professional development team of dedicated Regional Training Managers * Continuing education, LinkedIn Learning & licensing reimbursement * Career advancement pathways such as Hearing Care Provider and Client Experience Specialist Team Lead, Hearing Care Provider Advisory Board member, or District Manager * Paid externships and a Hearing Instrument Specialist Trainee program THE SUPPORT OF A LEADER IN HEARING HEALTH: HearUSA accepts the most insurance plans in the industry, has extensive network coverage, advanced online services, and pioneering technology. We draw on the expertise and hearing care services of more than 360 hearing centers across the U.S. HearUSA is also part of the WS Audiology (WSA) family, a global leader with over 11,000 employees in 125 markets and 2 global headquarters. AS A LEADER WE CAN OFFER: * Monthly Commissions * CEUs & State Licensure Renewals for HCPs * Defined Career Paths * Sponsorship & Preceptor Opportunities * President’s Club Incentives * Employee Referral Program LIFESTYLE & BENEFITS: * Comprehensive Benefits Package * Paid Holidays & PTO Policy * 401k Matching Program * Tuition Reimbursement * Employee, Family & Friends Hearing Aid Discount Program * Service Days & Diversity, Equity & Inclusion Initiatives Salary: $55,000 - $75,000 The Company provides equal opportunity to all employees and prospective employees without regard to race, color, creed, religion, national origin, ancestry, sex, age, physical or mental disability, marital status, pregnancy, genetic information, sexual orientation, gender identity, protected veteran or military status, or any other consideration not related to the person’s ability to do the job or otherwise made unlawful by federal, state, or local law.

Job DescriptionScismic is supporting the growth of the most respected legacies in American industry, known for pioneering breakthroughs in optical technologies! With a proven history of industry firsts—including application-specific fibers, optical connectors, ribbon cables, erbium-doped fibers, Raman fiber lasers, and fiber gratings - Company is commited to delivering cutting-edge optical innovations and solutions by designing, manufacturing and supplying the high performance optical fibers, fiber cable and components and devices. Their mission is to advance communication technology while providing exceptional service that drives value for customers, employees, and shareholders. They are currently seeking an R&D Engineer to join their R&D facility in Somerset NJ, to join a team that designs, fabricates, tests and prototypes innovative technology that serves the medical, industrial, aerospace, and telecommunications fields. The ideal candidate will advance their high power fiber laser portfolio, requiring the ability to identify and solve technical problems, both independently and as part of a team, in developing new products and new manufacturing processes. Significant aspects of the position include conducting experiments, analyzing data, improving and designing equipment and advanced prototypes, and interfacing with manufacturing. This role has the potential to grow into an independent research and development program. Essential duties and responsibilities include, but are not limited to: • Conduct research, propose experiments, and analyze data to validate hypotheses and improve understanding, particularly for troubleshooting performance and quality as well as equipment and materials issues related to high power fiber lasers and telecommunications components, • Innovate the next generation of optical component technology to improve performance and manufacturing processes, • Interface with teams developing fiber laser components such as optical fibers, fiber Bragg gratings, and fiber coatings to ensure complete design solutions for fiber laser systems, • Characterize glass, fibers, and coatings, and devise methods to identify and solve technical problems, • Assist in establishing and executing an R&D program to support their manufacturing sites, and provide input to the long-term technology roadmap, • Provide technical support to the marketing and sales team and assist in understanding new business opportunities, • Perform other related duties as required by management Key qualifications include:, • Advanced degree (MS or PhD) in Engineering, Optics, Physics, Physical Chemistry, or related field, • Experience in handling, characterizing and performing data analysis on optical fibers, • Experience with high-power fiber lasers and components such as pump and pump-signal combiners and fiber Bragg gratings, is highly desired, • Expertise in material properties of glass and polymers, mechanical design, and fabrication techniques is highly desired, • Excellent verbal and written communication skills, preferably as demonstrated by past publications or presentations, • Demonstrated ability to innovate in a high technology field, • Coursework and/or experience in photonics and optics, • Lab automation and computer skills, • Ability to understand and perform numerical simulation, • Demonstrated ability to learn quickly and work effectively with minimal supervision, • Maintain discretion when working with confidential and proprietary information, • Strict adherence to Company safety policies and procedures

Job Description Company Overview: We are a dynamic and innovative small biotechnology company dedicated to advancing oncology research through cutting-edge translational science. Our mission is to translate scientific discoveries into tangible therapeutic solutions that make a meaningful impact on cancer patients' lives. We are seeking a talented and motivated Translational Scientist to join our team and contribute to our mission-driven work. Position Overview: As a manager of clinical pharmacology you will be responsible for providing clinical pharmacology input in early (up to proof-of-concept stage) and late-stage clinical development. You will be responsible for representing clinical pharmacology function on drug development teams, providing input on the dose and the design of early and late-stage clinical trials, and for interacting with the clinicians and the clinical operations group for the execution of the clinical pharmacology components (PK, PD, biomarkers, etc) of the trials. In addition, you will be responsible for performing clinical PK/PD analyses, for providing subject matter leadership related to clinical ADME, pre-clinical to clinical extrapolation and selection of dose/regimen during early development. Additionally, you will be responsible for providing input on study design and leading the selection of doses for late-stage clinical studies. You will contribute to the preparation of the regulatory documents such as briefing books for pre-agency meetings, IBs, INDs, and IMPD dossiers, protocols, and clinical study reports. You will closely collaborate with other development-functions (Toxicology, Bioanalytical, Non-clinical PK/PD, Pharmacometrics and Physiological PK/PD Modeling and Simulation, Biomarkers, Biostatistics and Data Management, Clinical Operations, and Clinical Development) to bring drug candidates from IND stage to NDA. You will be responsible for working within the department level budget and resources. Support technical due diligence efforts for business development. Responsibilities: • Responsible for providing support for the preparation of the clinical pharmacology (PK, biomarkers, bioanalytical) sections of early and late-stage clinical protocols, Clin Pharm development plans, modeling & simulation plans, • Contribute to the preparation of the pre-IND, IND, IB and NDA/BLA documents, • Responsible for the pharmacokinetic and PK/PD data analyses using standard industry data analysis software, • Contribute to the design of early phase clinical trials (FIH to POC) and support project goals, • Responsible for recommending the starting dose in FIH trials based on allometric scaling or physiologically based PK modeling, • Conduct assessments of relevant exposure vs. response data for supporting dose selection during and post POC, • Contribute to the design of late-stage clinical trials (POC-NDA/BLA) and support project goals, • Responsible for leading the dose selection for Phase II and III clinical trials based on PK, PD biomarker and efficacy data analysis from previous studies., • Responsible for the preparation of the PK/PD reports and clinical study reports, • Represent Clin Pharm function for the project team at the regulatory agencies during regulatory meetings., • Provide clinical pharmacology input and collaborate across all areas of drug development, along with research, preclinical, bioanalytical and clinical development functions., • Provide oversight to vendors and ensure high quality deliverables that meet study/project timelines, • 3+ years of pertinent post-doctoral experience in supporting pharmacokinetics, pharmacodynamics and other clinical pharmacology components of early clinical trials within the pharmaceutical or biotech industry., • Exposure to biologics drug development. Knowledge of basic and clinical immunology is plus., • Hands on knowledge of PK/PD and statistical analyses methods used in analyzing early clinical phase data., • Knowledge of general regulatory process and experience in contributing to IND, EOP1, EOP2, and pre-BLA/NDA meetings with the FDA , EMA and other health authorities., • Excellent written and oral communication skills including good presentation skills. Qualifications: • Doctoral degree (PhD or Equivalent training by experience) in clinical pharmacology, pharmacokinetics, pharmacology, or relevant life science discipline such as biology, immunology., • Hands-on experience with pharmacokinetic/pharmacodynamic data analyses using standard industry data analysis software., • Familiar with PK/PD concepts. principles and applications to support prospective dose/regimen recommendations for planned Phase 1, 2 and 3 trials., • Experience in preparing clinical pharmacology components of clinical study protocols and clinical study reports., • Knowledge of current practices and issues in the bioanalytical and drug metabolism areas., • Proficient in the use of Microsoft Word, Excel and PowerPoint. Travel: • Ability to travel domestic and internationally ≤ 20%. Benefits: Competitive salary commensurate with experience Comprehensive benefits package, including medical, dental, and vision coverage Opportunities for career growth and professional development Collaborative and dynamic work environment with a diverse team of scientists and clinicians Opportunity to make a meaningful impact on cancer patients' lives through innovative translational research

Job Description Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Summary: Attalon is seeking a Principal Electrical Engineer to design complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock generators, matched RF signals and FPGA complexes. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications with minimal oversite., • Design high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs., • Work with circuit layout and board assembly subcontractors., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 9+ years of circuit design experience or Master’s degree with 7+ years’ experience, or Ph.D. with 4+ years’ experience Skills Required: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Experience with programmable logic devices and control system circuit design., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Self-motivated, responsible and team player. Desired: • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Knowledge of circuit board thermal and EMI management, and ESD protection, • Experience with government defense design processes. Equal Opportunity Employer Statement: Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance: This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Job Summary: Attalon is seeking a Senior Principal Electrical Engineer to lead the design of complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock sources and FPGAs, multilayer and matched RF signals with high isolation. Provide technical leadership to less experienced electrical engineers across the organization. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications., • Lead the design of high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs and monitor PCB layouts., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Work with circuit layout subcontractors and board population subcontractors, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business., • Provide technical advice to less experienced electrical engineers., • Oversee work assignments across a small team of hardware engineers. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 15+ years of circuit design experience or Master’s degree with 12+ years’ experience, or Ph.D. with 9+ years’ experience Skills: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Strong background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Experience with programmable logic devices and control system circuit design., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Knowledge of circuit board thermal and EMI management., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Experience with government defense design processes., • Self-motivated, responsible, team player with leadership experience. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job DescriptionDescription: We are actively seeking a highly skilled Mechanical Designer with a specialization in deep drawn metal stamping to join our innovative engineering team. This position requires a detail-oriented engineer with a comprehensive understanding of product design and advanced manufacturing processes, specifically in high-precision metal forming techniques. Requirements: Key Responsibilities: Design, develop, and optimize tooling and fixtures for deep drawn metal stamping processes. Ensure these designs facilitate maximum productivity, efficiency, and quality throughout the manufacturing workflow. Work closely with multidisciplinary teams, including production, quality assurance, research and development, and supply chain management, to develop creative and practical solutions to complex manufacturing challenges. Utilize advanced CAD software tools (such as SolidWorks, AutoCAD, or CATIA) to create detailed 2D and 3D models. Generate comprehensive engineering drawings conforming to industry standards to facilitate clear communication of design intent. Conduct thorough feasibility analyses and computer simulations to evaluate design concepts, optimize deep drawing processes, and anticipate potential manufacturing issues prior to production. Select appropriate materials and establish manufacturing processes and tolerances that align with design specifications, regulatory standards, and customer requirements, ensuring high-quality deliverables. Perform detailed root cause analysis on production anomalies and implement effective corrective actions, utilizing methodologies such as 5 Whys, Fishbone Diagrams, or Failure Mode and Effects Analysis (FMEA) to enhance process reliability. Oversee the prototyping phase, developing initial models for testing. Analyze test results rigorously and make iterative adjustments to designs based on empirical data and feedback from production teams to refine product performance. Actively participate in continuous improvement initiatives, employing Lean Manufacturing principles and Six Sigma methodologies to enhance process efficiencies, reduce waste, and lower production costs. Maintain meticulous documentation of design processes, modifications, and specifications. Ensure all design changes are accurately recorded and communicated to relevant stakeholders for future reference. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related engineering discipline. · Minimum of 5 years of experience in mechanical design and engineering within deep drawn metal stamping, ideally in high-volume manufacturing environments such as automotive, aerospace, or industrial machinery sectors. · Advanced proficiency in CAD software and familiarity with simulation tools for finite element analysis (FEA) and computational fluid dynamics (CFD). · Strong understanding of metallurgy, metal forming mechanics, and manufacturing processes, including deep drawing, stamping, and machining. · Exceptional problem-solving skills, with a systematic approach to troubleshooting and overcoming design and manufacturing challenges. · Excellent verbal and written communication skills, enabling clear dialogue with team members, suppliers, and customers to ensure alignment and project success. · Project Management Experience: Proven experience in project management, with the ability to lead and manage multiple design projects simultaneously from conception through to production. · Lean and Six Sigma Knowledge: Certification or demonstrable knowledge of Lean Manufacturing principles and Six Sigma methodologies to foster a culture of continuous improvement. Benefits: • Competitive salary with performance-linked bonuses., • Comprehensive health, dental, and vision benefits package., • 401(k) retirement plan with company matching contributions., • Opportunities for professional development and career advancement within a growing organization. Work Environment: This position will primarily be based in an office/manufacturing plant setting, with occasional travel required to visit clients, attend industry events, and engage with production facilities. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to

Job Description Be the Nurse You Always Wanted to be at BAYADA We want you to flourish here — learning new skills, growing with every challenge, succeeding in each assignment, and advancing in your nursing career. BAYADA Offers: • One on one patient care, • Flexible scheduling around your availability, • Paid Time Off (PTO), • Weekly Pay, • Electronic charting using CubHub, • In-depth paid training from day one, • Awarding-winning adult and pediatric Simulation labs, • Short commute times working close to home, • Around the clock clinical support BAYADA's Nurse Residency Program is the ONLY paid, new graduate residency program in home care to earn accreditation by the American Nurses Credentialing Center’s Commission on Accreditation (ANCC). As a non-profit organization, our focus is always on quality care for our clients. Our Clinical Managers take their time with each new nurse to be sure you enter the field comfortable and confident in your skills. We care for people of all ages, diagnoses, and acuity levels, giving you the chance to explore your passions. Benefits Include: • Preventive Care Coverage for ALL employees (PRN included), • Medical, Dental, and Vision benefits, • Company-paid life insurance, • Employee Assistance Program, • Public Service Loan Forgiveness Partner, • Current valid nursing license in U.S. and graduation from a qualified nursing program Bonus up to $2000 Apply now and ask your recruiter about our Live Info Sessions to learn more! NER-CJ-RX As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

Job Description Be the Nurse You Always Wanted to be at BAYADA We want you to flourish here — learning new skills, growing with every challenge, succeeding in each assignment, and advancing in your nursing career. BAYADA Offers: • One on one patient care, • Flexible scheduling around your availability, • Paid Time Off (PTO), • Weekly Pay, • Electronic charting using CubHub, • In-depth paid training from day one, • Awarding-winning adult and pediatric Simulation labs, • Short commute times working close to home, • Around the clock clinical support BAYADA's Nurse Residency Program is the ONLY paid, new graduate residency program in home care to earn accreditation by the American Nurses Credentialing Center’s Commission on Accreditation (ANCC). As a non-profit organization, our focus is always on quality care for our clients. Our Clinical Managers take their time with each new nurse to be sure you enter the field comfortable and confident in your skills. We care for people of all ages, diagnoses, and acuity levels, giving you the chance to explore your passions. Benefits Include: • Preventive Care Coverage for ALL employees (PRN included), • Medical, Dental, and Vision benefits, • Company-paid life insurance, • Employee Assistance Program, • Public Service Loan Forgiveness Partner, • Current valid nursing license in U.S. and graduation from a qualified nursing program Bonus up to $2000 Apply now and ask your recruiter about our Live Info Sessions to learn more! NER-CJ-RX As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

The Work The Scalable, Software Defined, Supportable S-Band Radar (S4R) Modeling and Simulation (M&S) Team is seeking a Project Specialist Staff member.

The Scalable, Software Defined, Supportable S-Band Radar (S4R) Modeling and Simulation (M&S) Team is seeking a Project Specialist Staff member.

A leading technology firm in New Jersey seeks a Senior Software Engineer II to design and develop advanced modeling and simulation infrastructure for AI/autonomy systems.

Experience in Advanced Framework for Simulation, Integration and Modeling environment including developing new scenarios and models; C++ plugins to AFSIM; interfaces to JSE; and configuration-managed large-scale simulation test data. The Senior Software Engineer II position in AI/Autonomy systems de