Trabajos test technician en Trenton, New JerseyCrear alertas

Job Description HVAC Service Technician Job Type: Full-Time Industry: HVAC / Air Conditioning Services Experience: 5+ years preferred Job Summary We are seeking an experienced and dependable AC Service Technician to diagnose, service, maintain, and repair residential and commercial air conditioning systems. The ideal candidate should have strong troubleshooting skills and hands-on experience with HVAC and refrigeration equipment. Key Responsibilities • Diagnose, service, maintain, and repair air conditioning systems., • Perform preventive maintenance and routine inspections., • Troubleshoot electrical, mechanical, and refrigeration issues., • Inspect compressors, condensers, evaporator coils, motors, fans, thermostats, and electrical components., • Perform refrigerant recovery, evacuation, charging, and leak detection in accordance with applicable regulations., • Install, replace, and repair AC components and equipment., • Test systems to ensure proper operation, cooling performance, and efficiency. Qualifications • 5+ years of experience as an AC/HVAC Service Technician preferred., • Strong knowledge of air conditioning, refrigeration, and HVAC systems., • Hands-on experience troubleshooting electrical and mechanical components., • EPA 608 certification required or preferred, depending on the position., • HVAC certification or technical training is a plus., • Valid driver's license.

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Electronic Soldering Assembly Technician – Manufacturing Location: Ewing, NJ Schedule: Monday–Friday, 7:00 AM–3:30 PM About the Role We are seeking an Electronic Soldering Assembly Technician to support the production of ultrasonic transducers and electronic assemblies. This role is focused on precision soldering, wiring, board-level assembly, and electrical testing. This is NOT a mechanical assembly or tank-building position. Ideal candidates will have stable work history, strong soldering skills, and experience working in an electronics manufacturing environment. Key Responsibilities • Perform SMT and through-hole soldering, wiring, and PCB-level assembly, • Build and repair electronic subassemblies, wiring harnesses, and transducer components, • Read and interpret electrical schematics, wiring diagrams, and assembly instructions, • Carry out hi-pot and impedance testing with multimeters and other test equipment, • Inspect and troubleshoot electronic assemblies under a microscope, • Assemble, calibrate, and rework transducer units and related electronic devices, • Follow all quality standards, safety protocols, and documentation procedures, • Maintain a clean, organized work area (5S standards)Requirements, • 1–3 years of electronics assembly or soldering experience required, • Solid experience in SMT, through-hole, fine-pitch, or micro soldering, • Ability to read electrical schematics and wiring diagrams, • Hands-on experience with DMM, hi-pot testers, or impedance meters preferred, • Experience assembling or inspecting products under microscopes/magnifiers, • Strong attention to detail and workmanship standards, • Stable job history required (minimum 1–2 years in previous positions), • IPC certification a plus (not required), • Able to lift 30–50 lbs as needed

Job Description We are currently seeking an Automotive Technician to become an integral part of our team! You will diagnose, adjust, repair, and overhaul automotive vehicles. J&S MITSUBISHI HAS BEEN IN BUSINESS FOR ONGOING 3 STRONG YEARS! WE SELL 300 USED CARS A MONTH AND NEED HELP TO CONTINUE GROWTH IN OUR SERVICE DEPARTMENT! SKILLED TECHNICIANS SPECIALIZING IN FOREIGN CAR REPAIR AND MITSUBISHI REPAIR IS HIGHLY NEEDED! Responsibilities: • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Provide labor and time estimates for automotive repairs, • Inspect and test new vehicles for necessary adjustments Qualifications: • Previous experience as an automotive technician, mechanic, or other related fields, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • MITSUBISHI CERTIFICATION IS A PLUS \nCompany Description J&S MITSUBISHI HAS BEEN IN BUSINESS FOR ONGOING 3 STRONG YEARS! WE SELL 300 USED CARS A MONTH AND NEED HELP TO CONTINUE GROWTH IN OUR SERVICE DEPARTMENT! SKILLED TECHNICIANS SPECIALIZING IN FOREIGN CAR REPAIR AND MITSUBISHI REPAIR IS HIGHLY NEEDED! J&S MITSUBISHI HAS BEEN IN BUSINESS FOR ONGOING 3 STRONG YEARS! WE SELL 300 USED CARS A MONTH AND NEED HELP TO CONTINUE GROWTH IN OUR SERVICE DEPARTMENT! SKILLED TECHNICIANS SPECIALIZING IN FOREIGN CAR REPAIR AND MITSUBISHI REPAIR IS HIGHLY NEEDED!

Job DescriptionDescription: We have immediate openings for energetic, enthusiastic and highly motivated auto technicians to join our growing and dynamic team! Are you a career minded individual in search of a workplace to call home? At Ciocca Subaru of Ewing, you’ll have the opportunity to have a positive impact on our customers and our community while achieving your financial and career goals! Qualifications: · 1-2 years of Service Technician experience required · ASE Certification preferred · Basic computer skills · Positive, can-do attitude · Able to operate electronic diagnostic equipment · Minimum high school diploma or GED equivalent required · Valid driver's license and clean driving record Responsibilities: · Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment. · Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. · Provide an estimate of time needed for additional repairs. · Executing repairs under warranty to manufacturer specifications. · Follow all safety procedures What we offer: · Hourly flat rate pay · Full Time · PTO and holidays · Employee referral bonus program · 401(K) retirement plan with company matching · Paid training and certification · Air climate control A/C shops · On the job training · Tuition Reimbursement program · The top insurance program in the industry including medical, dental, prescription and vision · Advancement within the Ciocca Automotive Family - we promote from within! · Employee discounts At Ciocca Subaru of Ewing, our team members enjoy a supportive and collaborative work environment. Don’t miss out on this exciting opportunity to grow your career! Apply now! We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requirements:

Job DescriptionDescription: We have immediate openings for energetic, enthusiastic and highly motivated auto technicians to join our growing and dynamic team! Are you a career minded individual in search of a workplace to call home? At Ciocca Kia of Ewing, you’ll have the opportunity to have a positive impact on our customers and our community while achieving your financial and career goals! Qualifications: · 1-2 years of Service Technician experience required · ASE Certification preferred · Basic computer skills · Positive, can-do attitude · Able to operate electronic diagnostic equipment · Minimum high school diploma or GED equivalent required · Valid driver's license and clean driving record Responsibilities: · Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment. · Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. · Provide an estimate of time needed for additional repairs. · Executing repairs under warranty to manufacturer specifications. · Follow all safety procedures What we offer: · Hourly flat rate pay · Full Time · PTO and holidays · Employee referral bonus program · 401(K) retirement plan with company matching · Paid training and certification · Air climate control A/C shops · On the job training · Tuition Reimbursement program · The top insurance program in the industry including medical, dental, prescription and vision · Advancement within the Ciocca Automotive Family - we promote from within! · Employee discounts: At Ciocca Kia of Ewing, our team members enjoy a supportive and collaborative work environment. Don’t miss out on this exciting opportunity to grow your career! Apply now! We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requirements:

Job DescriptionBenefits: • Unlimited Commission Program, • Health insurance, • Paid time off, • 401(k), • Bonus based on performance At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for a Master Technician (A Tech) that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility, and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas general service technician, you’ll be exposed to and have responsibility for performing a wide range of automotive maintenance services, including: • Perform a thorough visual safety and courtesy inspection., • Identify mechanical problems visually or with computer diagnostic equipment., • Performs tests on specific parts and systems to determine whether they are operating properly., • Performs routine and preventative maintenance including oil changes and tune-ups., • Repairs or replaces malfunctioning parts and systems such as but not limited to brake pads, belts, water pumps, transmissions, and motors., • Welding knowledge, • Test drive vehicles to confirm that repairs have been made properly., • Ability to lead a shop to success, • Performs other related duties as assigned. Qualifications • ASE certification preferred but not required., • Extensive knowledge of all aspects of vehicle maintenance and repairs., • Excellent analytical and problem-solving skills., • Proficient with related computer diagnostic equipment and software., • Ability to perform repairs in a timely manner., • Ability to read service manuals, repair manuals and work orders., • Valid driver’s license Qualities that make you stand out from the rest: · Excellent diagnostic skills · Team player · Completes every job/tasks in a timely manner · Excellent work ethics · Pushes themselves to learn more · Quality controls vehicles to avoid comebacks · Completes thorough courtesy checks in a timely manner

Job DescriptionDescription: Master Technician Sign on Bonus - $10,000 for qualified candidates!! Earn $100K-$150K plus yearly! We have an immediate openings for energetic, enthusiastic and highly motivated Master Technician to join our growing and dynamic team! Are you a career minded individual in search of a workplace to call home? At Ciocca Kia/Subaru of Ewing, you’ll have the opportunity to have a positive impact on our customers and our community while achieving your financial and career goals! What we offer: · $10,000 sign on bonus for qualified candidates! · Hourly flat rate pay: $40-$46 - YEARLY EARNING POTENTIAL- $100k-150k plus! · Air conditioned service shops! · Full Time · PTO and holidays · 401(K) retirement plan with company matching · Paid training and certification · On the job training · Tuition Reimbursement program · The top insurance program in the industry including medical, dental, prescription and vision · Advancement within the Ciocca Automotive Family · Employee discounts: purchases, repair, service, wash Why our technicians succeed: · Consistent workflow · Strong service writers · Fair dispatch · Up to date shops and shop equipment · Supportive management Qualifications: · 2+ years of Master Service Technician experience required · Strong Diagnostic and electrical troubleshooting skills · PA Emissions and Inspection Licenses · ASE Certification preferred · Basic computer skills · Able to operate electronic diagnostic equipment · Minimum high school diploma or GED equivalent required · Valid driver's license and clean driving record Responsibilities: · Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment. · Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. · Provide an estimate of time needed for additional repairs. · Executing repairs under warranty to manufacturer specifications. At Ciocca Kia/Subaru of Ewing, our team members enjoy a supportive and collaborative work environment. Don’t miss out on this exciting opportunity to grow your career! Apply now! We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requirements:

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools, • Perform services, diagnostics, and repairs in a timely fashion while communicating with the shop foreman and service advisor to promote an optimal customer experience All potential employment opportunities presented and advertised within this site are with independently owned and operated Kia Retailers. Applicants who seek employment through this site are applying for full-time employment with a participating Kia Retailer and not with KUS or ERS. All employment opportunities listed within this site are subject to applicable Federal and State statutes, rules, and regulations governing employment, which apply to each individual Kia Retailer’s specific location. KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required, • Must be willing to complete and pass drug screening and background checks Benefits Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job DescriptionBenefits: • Uncapped Commissions, • 401(k), • Bonus based on performance, • Health insurance, • Paid time off At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for an Intermediate Level Technician (B Tech) that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility, and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas general service technician, you’ll be exposed to and have responsibility for performing a wide range of automotive maintenance services, including: • Perform a thorough visual safety and courtesy inspection., • Performs tests on specific parts and systems to determine whether they are operating properly., • Mounting, balancing and rotating tires, • Replacing batteries, • Changing bulbs, belts and hoses, • Repairs or replaces malfunctioning parts and systems such as but not limited to brake pads, belts, tires and water pumps., • Performs routine and preventative maintenance including oil changes and tune-ups., • Ability to work on more complex jobs with some assistance such as diagnostics., • Test drive vehicles to confirm that repairs have been made properly., • Maintaining and cleaning shop areas, • Willingness to learn and grow as a technician, • Performs other related duties as assigned. Qualifications • ASE certification preferred but not required., • Intermediate level technicians must have prior knowledge of automotive basics., • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills with some assistance., • Ability to perform repairs in a timely manner., • Ability to read service manuals, repair manuals and work orders., • Valid driver’s license Qualities that make you stand out from the rest: · Problem solving skills · Willing to learn · Team player · Completes thorough courtesy checks with a heavy focus on maintenance. · Respectful · Quality controls work

Job Description Reach your full potential by joining the Americhem team! At Americhem, we’re committed to conducting business with respect for the environment, the law, ethics, and the health and safety of our employees, customers, suppliers and the public. The Quality Technician evaluates and performs specified tests on manufactured products and creates sample assessments using known formulations, raw materials, and color technology. All products are tested to verify and ensure conformance to required customer specifications. The incumbent is expected to perform the job duties under the direction of the lab supervisor or team leader. What we offer you: • BenefitHub, • Medical, dental, vision, prescription & life insurance, • Health savings account, • Flexible Spending Account, • Critical Illness and Hospital Indemnity Insurance, • Supplemental Life and AD&D Insurance, • Short- and long-term Disability Insurance, • 401(k) with a generous company match and no vesting schedule, • 10 paid holiday, 120 hour of PTO, • Retirement Savings Plan, • Employee Assistance Program The ideal candidate will be responsible for the following: Desired Knowledge and Skills: • Fundamental knowledge of materials, methods, machines and tools, including their designs, uses, repair, and maintenance., • Fundamental knowledge of production processes and techniques for maximizing the effective manufacture of products., • Fundamental knowledge of advanced pigment, polymer, and additive materials and how they interact with each other., • Fundamental knowledge of compound formulation and ability to evaluate color (Hue, Chroma, and Shade)., • Fundamental knowledge of relevant equipment, policies, and procedures to promote effective and safe operations of machines and equipment and use of chemicals., • Fundamental knowledge of quality controls and continuous improvement applications., • Fundamental knowledge and application of general math and statistics., • Computer literate to include fundamental knowledge and application of information and data management systems, electronic equipment, and computer software (i.e. Microsoft Suite, Oracle)., • Valid driver’s license with reliable automobile transportation. Essential Duties: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The duties listed below are representative of the knowledge, skill and/or ability required. • Holds safety in highest regard by making good safety decisions, following safety procedures, watching out for the safety of self and others, contributing to safety improvements, and, • participating in safety programs., • Starts the work process by checking the work assignment board for the campaign number to verify proper product identification and pulling the work binder and labor sheet with specifications., • Creates sample plaques by preparing the compound according to the FFC sheet, mixing compound in the mixer, and pressing in the press out machine to pelletize., • Runs a sample mold by combining the resin and compound in a plastic bag, loading a saved slot on the injection mold machine, and dropping the concentrate/resin mixture into the machine hopper to create a sample plaque., • Prepares plaques for testing and validation by placing them in the cooling racks to cool before the Spectrophotometer color readings occurs., • Conveys equipment problems to the team leader and maintenance by informing them of potential problems and documenting machine error messages or information obtained from visual inspections., • Investigates sources of problems by observing mechanical devices in operation, listening for problems, using precision measuring, testing instruments, and notifying the team leader of potential problems., • Changes machine settings throughout the process, with the guidance of the team leader, by adjusting functional parts of devices and control instruments using various types of settings and tools to assure product quality; recording changes on the FFC sheet., • Monitors the testing process by troubleshooting machine problems or operation errors that affects the quality of product samples and reports issues to the team leader., • Cleans and prepares mold injection machine for processing new test samples by purging the machine., • Increases production efficiency and effectiveness by suggesting changes in working conditions and the use of equipment., • Promotes harmonious worker relations by responding to inquiries, complaints, and requests in a timely and professional manner., • Applies safety precautions by transporting materials, tools, and equipment between work areas and storage without incurring an incident., • Keeps work area clean and organized by collecting and discarding material, and other refuse., • Follows all quality system, safety protocols, and environmental tasks by safely operating equipment, wearing proper protective equipment (PPE), completing safety training, and contributing to established safety goals., • Contributes to organization success by meeting team and company goals., • Improves job knowledge by attending training, keeping knowledge relevant, and skills current. Additional Position Responsibilities • Other duties as assigned. Position Requirements/Preferred Qualifications: Education: High School diploma or equivalent required. College degree/technical or vocational training preferred. Experience: 1-2 years of relevant work experience in manufacturing/production preferred.

Job Description Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." Total Rewards: Competitive base salary + uncapped commission. Year 1 On-Target Earnings: $70,000+ Top Earner Potential: $100,000+ per year What do our Pest Control Consultants do? The primary purpose of this role is to sell the company's industry leading pest management services and products to new and existing residential customers, while maintaining a customer-focused service to grow the business. You’ll be the face of our national brand to your local community, and your clients will count on you to protect their homes and their families. This includes assessing customers' needs by consulting with the customer and performing an analysis using expert knowledge of the company's products and services that result in the sales of the organization's pest control solutions. Responsibilities include but are not limited to the following: Visually inspect homes for pests, pest harborage, pest entries, etc. Based on assessment findings, sell pest control solutions as well as preventative maintenance for residential customers Collaborate with our Customer Service Center, Inside Sales department, and Technicians for increased opportunities Partner with Branch Manager to identify revenue streams with our current base and service specialist engagement Develop proposals for customers to resolve existing pest issues while also proposing additional enhancements to pest household services Complete Home diagram using Sales CRM and provided to ensure clear understanding of customer home and possible challenges Follow up on past proposals to close sales opportunities Provide expert knowledge to new service installations to ensure the job is completed satisfactorily Complete daily activities and sales performance using the company sales CRM Essential Job Functions: We’re not going to sugarcoat it. The essential functions of this job have some physical demands (of course, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Here’s what we mean: You’ve got to be able to move up to 10 lbs. regularly and 11–20 lbs. frequently, whether that’s lifting, carrying, pushing, pulling, or otherwise repositioning objects You’ll move around a lot — regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. You’ll go up and down stairs, ladders, scaffolding, ramps, and poles. And you’ll need to keep your balance when walking, standing, or crouching on narrow, slippery, or moving surfaces. (You’ll definitely get your steps in.) You must be comfortable dealing with different pests (spiders, flies, mosquitos, rodents, etc.), as well as being required to go into small spaces such as basements, crawl spaces, attics, etc. You must be able to safely operate a motor vehicle and make sure it and all other equipment is kept clean Sometimes you’ll need to wear personal protective equipment (PPE), like an OSHA-compliant respirator, and you’ll need to be okay with regularly working in confined spaces, narrow aisles, or passageways (you know, where critters live) What do you need? High school diploma or equivalent A valid driver’s license from your current state of residence (Company vehicle and gas card provided) Strong social, customer service, and communication skills — in fact, we’d be really impressed if you came to this role with related experience and/or training in sales. Prefer at least 1-2 years of pest technician or sales experience Travel up to 100% of time within assigned territory(s) #ZipSales Base Pay RangeHourly: $19.00 - $20.19 While starting pay falls within the given range, it can vary based on factors like geographic location, skills, education, and experience. Total earnings may also be affected by overtime, incentives, commissions, performance, and route assignment (where applicable). Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth Multiple avenues to grow your career Training and development programs available Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement 401(k) retirement plan with company-matching contributions Work-Life Balance Vacation days & sick days Company-paid holidays & floating holidays A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply. \nCompany Description For more than 90 years, we’ve protected what's most valuable to you, with local specialists who go above and beyond to fix your problem and services designed to make your life easier, 365 days a year. So when you trust Terminix to nix your pest problem, it's not just a promise. It's a guarantee. For more than 90 years, we’ve protected what's most valuable to you, with local specialists who go above and beyond to fix your problem and services designed to make your life easier, 365 days a year. So when you trust Terminix to nix your pest problem, it's not just a promise. It's a guarantee.

Job Description We are Immediately Hiring a Team of Skilled Industrial Technicians (Mechanically Inclined) for a 8-10 Week Project. Need Reliable and Ready to Work Technicians for this Critical, Time Sensitive Job Opportunity. Pay is up to $35/hr. 1st shift 8-10 hour days, 6 days a week (with opportunity for 7 days, if available and want the extra overtime). Training will be required and will be traveling to Memphis Tennessee for a few days - expenses are covered. Job Description: This role focuses on the precise disassembly, inspection, and reassembly of complex hardware and equipment. You will work with server racks and related mechanical components, using torque tools and following detailed engineering drawings and work instructions to ensure every unit meets strict quality and compliance standards. The position requires strong mechanical aptitude, attention to detail, and the ability to perform highly detailed mechanical assembly and rework in a fast-paced industrial production environment. Additional Skills & Qualifications • Strong mechanical aptitude with comfort using hand tools, power tools, and torque tools in an industrial environment., • Hands-on experience in manufacturing, maintenance, mechanical assembly, industrial repair, or equipment maintenance such as being a maintenance technician, industrial maintenance technician, mechanical technician, automotive technician, aircraft mechanic, or in a similar mechanical role., • Experience working with server racks, data equipment, electronics manufacturing, or other complex mechanical assemblies would all be a plus., • Comfort working in a very physical role that involves lifting, moving, and positioning equipment and components., • Ability to travel for short-term training and adapt quickly to new processes and procedures., • Proven experience disassembling and rebuilding equipment, machinery, or mechanical systems., • Ability to read, interpret, and follow detailed work instructions, engineering drawings, and assembly processes., • Strong attention to detail with a consistent commitment to quality and accuracy., • Understanding of basic quality control processes and visual inspection techniques. Why Work Here? You will be working for a large manufacturer and create more long term opportunities within. This position offers the chance to work with cutting-edge infrastructure in a dynamic industrial environment. You will gain valuable experience with complex mechanical and electronic assemblies while contributing directly to high-impact projects. The role provides structured training, exposure to standardized quality and safety procedures, and the ability to develop your mechanical skills in a unique setting that values precision, reliability, and continuous improvement. Work Environment/Requirements: Industrial/Manufacturing site. The assignment is expected to last approximately 810 weeks, with daily days shift hours ranging from 8 to 10. Mandatory overtime is required, and the position is very physical, involving frequent lifting, moving, and positioning of equipment and components. Appropriate personal protective equipment (PPE) is required and must be worn as directed. New hires will travel to Memphis, Tennessee for the first three days of training before starting work at the project site. Job Type & Location This is a Contract position based out of Morrisville, PA. Pay and Benefits The pay range for this position is $28.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Morrisville,PA. Application Deadline This position is anticipated to close on Oct 11, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Phlebotomist Centers Laboratory of New Jersey is actively searching for Phlebotomists to work weekdays 8 AM - 7 PM for our Laboratory located in Trenton, NJ. The ideal candidate will have 2 years of prior experience along with excellent interpersonal skills! Reports to: Phlebotomy Supervisor Will work in multiple locations Position Summary: Phlebotomists are professionals who specialize in drawing blood from patients. Their responsibilities include interviewing and preparing the patient for the blood draw. They are required to follow strict precautionary safety procedures in order to limit the risk of contact with potentially infectious blood and other bodily fluids. Record keeping and labeling are also major duties of phlebotomists, to ensure that the right tests are performed on the correct blood specimens. Duties and Responsibilities: Accurately identify patients using a wristband, documents or through known visual identification Receives assignments, assembles supplies and equipment required to perform specimen collection according to established standards, policies, and procedures Accurately identifies priorities such as Stat, timed, or routine Determine the right venipuncture method based on patient age, health etc. Reassure patients and help them relax Find veins that are suitable for puncture Draw blood using proper equipment and techniques Keep all sharps, needles, and equipment out of reach of the patient and properly dispose of these and all medical waste Follow the proper test tube order of draw Use appropriate personal protective equipment Ensure optimal quality and quantity of samples for the test and tube required Label test tubes correctly and send or deliver them for testing Does not attempt to draw any patient more than two times and request help if necessary Answer patient questions and provide useful information Keep accurate patient records Adhere to all relevant health and safety standards while working Monitor the patient for reactions; monitor equipment operations Educate patient on immediate aftercare Maintain a clean and sanitary space If trained on specimen storage and centrifugation, use all appropriate procedures Ensure patient confidentiality Must be capable of collecting and processing Covid-19 tests Attends all required company meetings and training programs Requirements: High school degree or equivalent Phlebotomy Technician certificate preferred Without certificate must have completed a hospital or major lab training program Understanding of standard blood drawing practices and procedures 2 years proven experience as a phlebotomist Good interpersonal skills and communication Able and flexible to work nights, evening hours, weekends, holidays, and extended shifts Strict adherence to safety regulations, operating and maintenance instructions, and procedure manuals Knowledge of aseptic and sterilization techniques Valid State issued driver’s license with a good driving record Adequate automobile insurance Vehicle in good driving condition

Job Description Adecco is assisting a local client in Hamilton, NJ in their search for a Lead Electro-Mechanical Technician. This is a contract (possible contract to hire) role on 1st Shift – Monday – Friday 6:00 AM – 2:30 PM, but with ability to support alternate shifts when required. If you meet the qualifications below, apply now! Core Responsibilities: Electrical Systems (50%) -Troubleshoot 5V, 12V, and 24VDC control systems -Diagnose PCB-based machine control boards (power supply, I/O boards, relay boards) -Identify failed electrical components such as fuses, capacitors, relays, connectors, regulators, and ICs -Interpret electrical schematics, wiring diagrams, and ladder diagrams -Trace PLC inputs and outputs for I/O level diagnostics (no programming required) -Diagnose sensors, safety circuits, and interlocks -Test and verify power supplies and signal integrity -Execute structured electrical preventive maintenance -Perform basic soldering and board-level repair when feasible -Support electrical upgrades and machine improvements Mechanical Systems (50%) -Troubleshoot pneumatic systems including solenoids, cylinders, regulators, valves, and airlines -Repair or replace bearings, belts, chains, couplings, and drive components -Perform motor alignment and mechanical adjustments -Diagnose mechanical failures causing downtime or quality issues -Support equipment rebuilds and mechanical overhauls -Maintain conveyors, gearboxes, and drive systems -Execute mechanical preventive maintenance tasks -Inspect wear components and implement reliability improvements Production Support & Mechanical Troubleshooting -Support production changeovers, ensuring equipment is mechanically prepared for new product runs -Troubleshoot mechanical jam-ups, material flow issues, and feed problems -Diagnose and correct misalignment, product handling issues, and mechanical causes of line stoppages -Support line startup and stabilization after changeovers Preventive Maintenance & Calibration Support -Execute scheduled preventive maintenance (PM) tasks in accordance with maintenance schedules and procedures -Support calibration activities (CAL) on production and quality equipment as required -Ensure PM and CAL tasks are completed accurately and documented in CMMS -Identify equipment conditions during PM inspections that could lead to future failures or downtime -Maintain PM and calibration completion rates above 95% while ensuring tasks are executed according to documented procedures Production Coordination & Downtime Response -Coordinate directly with the Production Supervisor during equipment failures to prioritize repairs and restore production safely and efficiently -Communicate downtime status, root cause, and estimated recovery time to the Plant Manager when failures impact production schedules or exceed normal repair thresholds -Support plant leadership in determining recovery actions during extended downtime events -Document failure causes and corrective actions in the CMMS to prevent repeat failures -Track repeat equipment failures and recommend corrective actions to improve reliability Lead Technician Responsibilities -Serve as escalation point for complex electrical or mechanical failures -Mentor and guide junior technicians in structured troubleshooting -Improve troubleshooting methodology across the team -Reduce repeat equipment failures -Enforce LOTO and machine safety standards -Ensure Good Documentation Practices (GDP) in regulated manufacturing environments -Maintain accurate work orders and repair history in the CMMS Required Qualifications -1–2 years of industrial maintenance experience -Knowledge low-voltage electrical troubleshooting experience (5–24VDC systems) -Mechanical maintenance experience on automated equipment -Ability to read and interpret electrical and mechanical schematics -Proficient with multimeter diagnostics -Experience working inside electrical control panels -Basic soldering capability -Familiar with CMMS systems -Proficiency with Microsoft Office 365 (Outlook, Excel) -Bilingual (Spanish or Polish) a plus -Candidates must demonstrate the ability to systematically troubleshoot equipment failures using schematics, instrumentation, and logical fault isolation techniques Pay Details: $28.00 to $30.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Cox Automotive - USA Job Family Group: Vehicle Operations Management Level: Individual Contributor Flexible Work Option: Can work remotely but need to live in the specified city, state, or region Travel % Yes 100% of the time Work Shift: Variable Compensation: Hourly base pay rate is $24.09 - $36.11/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. * If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS3 to 317-597-8130 * $3500 New Hire Bonus - 50% after 30 days and 50% after 180 Days Cox Fleet keeps your fleet moving! Cox Fleet has grown to become one of the largest fleet maintenance companies in the country.Cox Fleet is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. Cox Fleet also services customers utilizing its 50+ nationwide service centers; each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and provide scheduled maintenance services and unscheduled services to fleets anywhere, anytime. To support growth of the company, Cox Fleet is currently hiring a Mobile Trailer Technician II to join our team! This is a dedicated on-site position and we do not provide emergency side of the road type of repairs. If you are looking for a new place to call home, we would love to talk to you! The Mobile Trailer Technician II will be responsible for performing certified DOT inspections, Preventative Maintenance inspections, light repairs, and other duties as assigned such as trailer brakes, air lines, auxiliary pumps, and engines, liftgates, brake chambers, welding, fabrication, replacement of panels, body and framework. Work performed at the customer's site. The Mobile Trailer Technician II can perform more advanced repairs under the supervision of a Sr Mobile Trailer Technician or higher. The Mobile Trailer Technician II assists Sr Mobile Trailer Technician or higher Technicians with repairs and continues to learn additional advanced mechanical skills. A successful Mobile Trailer Technician II complies with all company policies and achieves high level performance metrics. • Preventive Maintenance and repairs on ThermoKing, Carrier and other refrigeration equipment, Preventive maintenance and repair, DOT inspections on Freightliner and Mack Trucks, trailers out of Service Truck with little or no supervision., • Diagnose and repair/replace compressors, coils, electrical components, etc, • Always follows and complies with safe operating practices and procedures., • Independently manage parts inventory and equipment provided on company-issued service truck and perform periodic reconciliation., • Maintain and operate company-issued service vehicle, conduct safety checks, and pre-/post-trip inspections of vehicle., • Applies knowledge that is acquired through formal training or on-the-job experience to perform one's job; works with, understands, and evaluates technical information related to the job., • Work with and listen effectively to clients and customers to assess their needs, providing information or assistance, resolving their problems, or satisfying their expectations., • Manage concurrent assigned tasks, making effective judgments as to prioritizing work-related activities and time allocations., • Act with integrity, demonstrate honesty and keep commitments. Behave in a consistent manner, keeping sensitive information confidential and adhering to ethical and professional standards., • Perform scheduled preventative maintenance ("PM"), DOT Inspections and follow up repairs on trailers and equipment in a mobile/field environment., • Respond to call center dispatched unscheduled service and maintenance request., • Use hand tools, precision instruments, as well as Trailer tools, welding equipment, and jacks., • Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders ("RO") using company issued iOS device and our proprietary TRAIT application, • Accurately complete DOT forms and all other forms of documentation in a timely fashion., • Work with a high degree of independence and manage own daily schedule., • Maintain a high level of productivity and be able to work within or close to most Standard Repair Times., • Obtain parts from approved local and national vendors as necessary for the repairs to be performed., • Communicate with management and support team via email or phone to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes., • Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT., • Participate and complete all-in company required safety training., • Establishes and maintains good working relationships with assigned customers and vendors. Communicate effectively both verbally and in writing., • Maintain company issued service truck, conduct safety checks and daily pre/post trip inspections., • Perform minor adjustment and repairs on various types of trailers equipment and systems including, but not limited to the following: trailer brakes, air lines, auxiliary pumps and engines, liftgates, and brake chambers, • Adhere to company policies, processes, and procedures., • Remain up to date on safety protocols and procedures., • Diagnose, adjust, and perform repairs on various types of trailer equipment, and systems including, but not limited to the following: trailer brakes, air lines, auxiliary pumps and engines, liftgates, brake chambers, welding, fabrication, replacement of panels, body, and framework., • Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives., • Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers and pressure gauges., • Assist Mobile Trailer Technician I with diagnostics., • High School Diploma/GED and 3 years' experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED in a related discipline; or 5 years' experience in a related field., • At least 3 years of experience with refrigerated equipment, • Possess and supply a set of hand tools necessary to perform required job duties., • Obtain Automotive Service Excellence (ASE) certification T8 (PMI) within eighteen (18) months., • Obtain 608/609 certification within eighteen (18) months., • This position follows regulations issued by the Department of Transportation's (DOT) Federal Motor Carrier Safety Administration (FMCSA). Candidate must be able to successfully complete and pass a DOT-regulated pre-employment background screening and DOT physical prior to employment., • A current and valid DOT medical card with more than four (4) months remaining until its expiration may be submitted in lieu of a DOT physical. If the DOT medical card has four (4) months or less of validity remaining, a DOT physical will be required., • Due to interstate operating authority commerce regulations, candidates must be at least 21 years or older., • Safe drivers needed; valid driver's license required. Candidate must hold a valid state-of-residence driver's license, be able to obtain and maintain their Driver Qualification File. Required or Obtained Within 18 Months: • ASE T8 (PMI) certification Preferred Certifications: • ASE 608/609 certification*, • ASE T4 (Brakes) certification, • ASE T5 (Suspension) certification, • ASE T6 (Electrical and Electronic Systems), • ASE T7 (HVAC) certification, • Knowledge of trailer parts and systems, including their designs, uses, repair, and maintenance, to make repairs or perform maintenance services.

Job Description Job description Transteck, Inc. is one of the largest Freightliner Truck dealers in the United States with 14 locations and 4 body shops. We have over 150 trained technicians, over $5,000,000 in parts inventory, and utilize state-of-the-art facilities. Our large size means that we have the resources to provide the best-in-class facilities, training, and equipment while working with the industry leader in large heavy-duty trucks. But despite our size, our 14 locations located from Pittsburgh to New Jersey through Maryland to Northern VA are all small enough to get the personal touch needed to keep you trained and motivated. We have an immediate opening for a Diesel Technician for our Freightliner of Philadelphia dealership located in Levittown, PA. Salary is $40,000-$100,000 per year. What Transteck Offers: • Competitive pay rates based on experience and billable hours, • State-of-the-art facilities, • Best-in-class training programs in our very own technical training center, • The chance to advance your technical and leadership skills through on-the-job training, growth, and development., • You can keep your dirt at work - laundry service for your company-provided uniforms., • Job specific PPE, • Boot allowance, • Prescription safety glasses, • Group Medical, Dental, Vision, Disability, and Life Insurance, • 401k Learn More to EARN More! Position Requirements: • High school diploma or GED; or one to three months related experience and/or training; or equivalent combination of education and experience., • Valid driver's license, • Must provide own hand tools Position Preferences: • Commercial Driving License, • Heavy Duty truck experience, • Technical training school or equivalent experience Technician Duties: • Determine cause of malfunction; use manufacturers approved troubleshooting guides, test drive, or refer to manufactures on-line or printed service manuals as necessary., • Promote sales of labor, parts, and accessories to meet customer needs., • Perform requested labor operations using recommended procedures, tools, and equipment., • Document work performed and applicable technical information., • Note additional needed work and obtain approval before proceeding., • Clean all parts that have been worked on and keep customer vehicles clean., • Maintain housekeeping and organization of personal work area., • Maintain tools and equipment., • Order parts according to dealership procedures., • Tag all warranty parts and return all dirty cores to parts in a timely manner., • Perform repairs in a timely manner set by the manufacturers standard repair time guidelines. We are an equal opportunity employer. Must pass a background check, physical, and drug screen. **Must pass background & criminal records check, physical exam and drug screen.

Job DescriptionDescription: Reports To The HD Diesel Commercial Technician will report to Service Manager Job Overview We are searching for an analytical, enthusiastic HD Diesel Commercial mechanic to help our clients resolve issues with vehicle performance and appearance. The HD Diesel Commercial Mechanic will speak to customers about the performance and history of their vehicles, inspect mechanical and electronic components, diagnose issues, and discuss possible resolutions with clients. You will also maintain shop equipment and generate estimates and timelines for repairs. To be a successful HD Diesel Commercial mechanic, you should be focused on providing high-quality service to customers as you help them identify, repair, and avert issues that may affect the performance or longevity of their vehicles. You should be thorough, reliable, honest, logical, and motivated. Responsibilities and Duties • Working with the manager and other mechanics to diagnose and repair the mechanical and electrical components of vehicles., • Listening to clients to learn more about vehicle history, potential problems, and the services they would like to receive., • Performing test drives, inspections, and other diagnostic tests on vehicles to identify where problems exist and determine which parts need to be repaired or replaced., • Completing preventative maintenance on vehicles, such as performing oil changes, flushing, and replacing fluids, and replacing brakes., • Generating timelines and estimates for repairs and discussing options with clients., • Inspecting internal systems and controls to ensure the vehicle is operating properly and in compliance with state regulations., • Maintaining accurate records relating to clients, their vehicles, parts, and service history., • Using shop equipment as instructed, performing regular maintenance and repairs as needed., • Engaging in learning opportunities to update job knowledge and technical skills. Qualifications • High school diploma or equivalent., • Additional education, certifications, or experience is generally preferred., • Proven ability to diagnose and repair vehicles and follow safety instructions and directions., • Proficiency with hand tools and other equipment., • Excellent active listening, problem-solving, and communication skills., • Self-motivated, independent, and reliable with a strong work ethic., • Pa. Inspection License, • Pa. Emissions LicenseRequirements:

Job Description Main functions: The Maintenance Technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. Reports to: Maintenance Manager Essential Functions: Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service Perform simple machinist duties and responsibilities Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines Read and interpret equipment manuals and work orders to perform required maintenance and service Diagnose problems, replace or repair parts, test and make adjustments Perform regular preventative maintenance on machines, equipment and plant facilities Perform a variety of plumbing maintenance and carpentry functions Use a variety of hand and power tools, electric meters and material handling equipment in performing duties Detect faulty operations, defective material and report those and any unusual situations to proper supervision Comply with safety regulations and maintain clean and orderly work areas Competencies: Technical capacity Ethical conduct Communication proficiency Results driven Initiative Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience 4+ years of manufacturing experience; strong hydraulic, pneumatic, mechanical and industrial skills with some PLC experience and HVAC Completion of a complete GMA Training package provide by GMA Complete understand of all industrial safety regulations Punctual, meticulous and reliable An AA degree in mechanical, electrical or industrial maintenance (preferred) Vacuum furnace experience (preferred) Language Ability: Ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers Ability to print and speak simple sentences Math Ability: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's Ability to perform these operations using units of American money and weight measurement, volume, and distance Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions Ability to deal with problems involving a few concrete variables in standardized situations Computer Skills: To perform this job successfully, an individual should have knowledge of word processing software; spreadsheet software; inventory software; internet software; order processing systems; manufacturing software and database software. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Work weeks are 5 days, Monday to Friday, 8 hours per day, starting at 07:00am. The Maintenance Technician may be required to work hours/days outside of the normally scheduled work week. The Maintenance Technician is frequently exposed to noise, dust, fumes or airborne particles, moving mechanical parts and vibration. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the physical demands. The employee must frequently lift and/or move up to 55 pounds. Specific vision abilities required by this job include: close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands and fingers to handle or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. \nCompany Description GMA Garnet is a safety conscious mineral processing facility. Our product is used for waterjet cutting and sand blasting. GMA Garnet is a safety conscious mineral processing facility. Our product is used for waterjet cutting and sand blasting.

The Lead Structured Cabling Technician is responsible for overseeing the installation, maintenance, and testing of structured cabling systems for Wi-Fi Access Point (AP) installation projects. This role involves managing a team of two assistant technicians, ensuring adherence to industry standards, and coordinating with the project manager to meet deadlines and quality benchmarks. Team Leadership: • Supervise and mentor two assistant technicians in structured cabling and Wi-Fi AP installations., • Delegate tasks efficiently, ensuring team members understand project goals, timelines, and deliverables., • Provide training and support to develop team members' technical skills. Installation of Structured Cabling: • Lead the installation, routing, and termination of Cat6A cables., • Oversee the setup of cable pathways to ensure proper organization and safety., • Test and certify all cable installations to meet performance standards. Wi-Fi AP Installation: • Direct the mounting and connection of Wi-Fi Access Points according to design specifications., • Ensure successful network integration of Client, verifying connectivity and performance., • Document all installations with labeling, photos, and proper records for future reference. Project Coordination: • Communicate regularly with the project manager, network engineers, and site supervisors to report progress and address issues., • Coordinate with other trades and contractors to ensure seamless project execution., • Manage materials and tools, ensuring resources are available to complete tasks on time. Testing and Troubleshooting: • Oversee cable testing using appropriate tools to verify signal quality and adherence to standards., • Diagnose and resolve complex cabling and connectivity issues., • Collaborate with network engineers to adjust AP placement or configuration as needed. Compliance and Quality Assurance: • Ensure all installations comply with industry standards (TIA/EIA) and local regulations., • Conduct thorough quality inspections to guarantee system reliability and performance., • Maintain detailed records of installations, including diagrams, test results, and cable management details., • Ensure adherence to ICRA (Infection Control Risk Assessment) protocols in relevant environments. Safety and Compliance: • Enforce on-site safety protocols and ensure all team members follow personal protective equipment (PPE) requirements., • Conduct regular safety briefings and inspections to maintain a safe working environment. Education: • High school diploma or equivalent; technical certifications in structured cabling preferred. Experience: • Minimum of 3 years of experience in structured cabling and network infrastructure installation., • Previous leadership or supervisory experience is highly desirable., • Strong background in Wi-Fi AP installation and configuration., • Experience in hospital environments is preferred. Skills: • Expertise in cable termination and testing (Cat5e, Cat6, fiber optic)., • Strong understanding of Wi-Fi network architecture and AP deployment best practices., • Excellent leadership, team management, and problem-solving skills., • Ability to read and interpret blueprints, floor plans, and network diagrams., • High attention to detail. Certifications: • ICRA Certification is a plus., • BICSI certification (e.g., RCDD, Installer, Technician) is a plus., • OSHA 10/30 certification preferred. Physical Requirements: • Ability to lift and carry up to 50 pounds., • Comfortable working at heights and in confined spaces., • Ability to stand, walk, and work for extended periods. Work Environment: • Exposure to dust, noise, and varying temperatures., • Travel required to multiple job sites within a 50-mile radius.

Location: Ewing, NJ Schedule: MondayFriday, 7:00 AM3:30 PM We are seeking an Electronic Soldering Assembly Technician to support the production of ultrasonic transducers and electronic assemblies. This role is focused on precision soldering, wiring, board-level assembly, and electrical testing. This is NOT a mechanical assembly or tank-building position. Ideal candidates will have stable work history, strong soldering skills, and experience working in an electronics manufacturing environment. • Perform SMT and through-hole soldering, wiring, and PCB-level assembly, • Build and repair electronic subassemblies, wiring harnesses, and transducer components, • Read and interpret electrical schematics, wiring diagrams, and assembly instructions, • Carry out hi-pot and impedance testing with multimeters and other test equipment, • Inspect and troubleshoot electronic assemblies under a microscope, • Assemble, calibrate, and rework transducer units and related electronic devices, • Follow all quality standards, safety protocols, and documentation procedures, • Maintain a clean, organized work area (5S standards), • 13 years of electronics assembly or soldering experience required, • Solid experience in SMT, through-hole, fine-pitch, or micro soldering, • Ability to read electrical schematics and wiring diagrams, • Hands-on experience with DMM, hi-pot testers, or impedance meters preferred, • Experience assembling or inspecting products under microscopes/magnifiers, • Strong attention to detail and workmanship standards, • Stable job history required (minimum 12 years in previous positions), • IPC certification a plus (not required), • Able to lift 3050 lbs as needed Compensation: $21.00 - $26.00 per hour

Capital Health is the region's leader in providing progressive, quality patient care with significant investments in our exceptional physicians, nurses and staff, as well as advanced technology. Capital Health is a dynamic health care resource accredited by the DNV that includes two hospitals, an outpatient center, satellite ED, and an expansive network of primary and specialty care. Capital Health Medical Group is made up of more than 600 physicians and other providers who offer primary and specialty care, as well as hospital-based services, to patients throughout the region. Capital Health recognizes that attracting the best talent is key to our strategy and success as an organization. As a result, we aim for flexibility in structuring competitive compensation offers to ensure we can attract the best candidates. The listed pay range or pay rate reflects compensation for a full-time equivalent (1.0 FTE) position. Actual compensation may differ depending on assigned hours and position status (e.g., part-time). $20.91 - $27.19 Demonstrates the ability to prepare IV Admixtures according to policy. Demonstrates competency in using Pyxis 3000. Demonstrates the ability to accurately generate fill and interim lists in WORx. Demonstrates the ability to complete tasks associated with the employee prescription program. Demonstrates the ability to effectively use the WORX and HBOC systems. Demonstrates the ability to process and dispense individual medication orders. Handles controlled substances in accordance with New Jersey and Federal Laws. Demonstrates competency in performing purchasing functions. Performs technical and supportive duties for the pharmacy. Education: High school diploma or equivalency. Experience: Current pharmacy technician certification (CPhT) or acquire CPhT within 12 months of employment. Current NJ Board of Pharmacy Registration or acquire the registration within 6 months of employment. A valid driver's license is required for Pharmacy Technicians whose assigned duties include driving and delivering medications and prescriptions to designated Capital Health locations. Other Credentials: Basic computer and mathematical skills. • Completes successfully the IV sterile technique module including workbook, media fill challenge, and calculations test and maintains competency requirement. Demonstrates knowledge of basic IV technique, IV hood/glove box and understands the USP 797 requirement in IV preparation. Demonstrates the ability to aseptically prepare IVPB, syringes, large volume IV, ADD-Vantage and Add-A-Vial preparations., • Demonstrates knowledge and ensures compliance with the laws/rules/regulations governing the labeling of IV vials, syringes, compounded IV products including concentration, beyond-use-dating, storage requirements and initials., • Demonstrates competency in using the PARx to fill pyxis stations. Picks accurately medications based upon ParX requirements. Refills accurately medications into pyxis stations using scan technology. Demonstrates the ability to load new medications into pyxis. Enters accurately the date of the next medication to expire EACH TIME the medication is refilled. Fills medication lists accurately. Labels drawers with correct patient name and room number. Delivers accurately all medications to correct patient bin in a timely manner., • Completes monthly nursing station inspections as assigned. Removes all outdated medications. Responds to stock outages immediately., • Demonstrates the ability to change pyxis paper, fix drawer jams, retrieve reports as necessary., • Demonstrates the ability to accept employee prescriptions including ensuring completion of associated paperwork. Enters accurately prescription into the computer system. Fills accurately the prescription. Faxes prescription and paperwork to Fuld Outpatient Pharmacy and places original paperwork into the transport container, delivers container to Security Desk timely., • Completes accurately the transport log, loads checked prescriptions into the transport container. Retrieves promptly transport container from Security, unpacks container, places prescriptions in alphabetical containers, refrigerator or narcotic bin as applicable. Dispenses correct prescription to employee utilizing QS1 signature system and QuickCharge., • Demonstrates the ability to access patient profiles and retrieve ADT information., • Demonstrates the ability to prepare WORX jobs as needed i.e., fills, labels (IV/PB/SYR) production lists, profiles, etc., • Fills accurately medication orders, matching label to doctor's order. Processes STAT medications as a priority. Fills crash cart and anesthesia trays accurately and assigns expiration dates., • Follows good manufacturing practices when unit dosing liquids and solids. Complies with expiration date requirements., • Delivers controlled substances in accordance with hospital policy. Maintains required paperwork. Reports any irregularities (discrepancies, etc) to a pharmacist in a timely manner., • Assists in the ordering process by using the want book as evidenced by documentation in the want book. Demonstrates the ability to order medications from the wholesaler when applicable. Ensures the order is checked-in and put away in a timely manner, especially those requiring refrigeration., • Follows the procedure for borrowing and loaning medications with other institutions or retail pharmacies., • Assists in reviewing product expiration dates as evidenced by lack of expired medications in the active stock area. Assists in returning medications to stock and credits patients appropriately as evidenced by observation of a pharmacist. Stocks all areas accurately, as evidenced by lack of errors. Accurately and promptly fills floor stock requisitions and stock for off site locations. Frequent physical demands include: Standing, Walking, Pinching/fine motor activities. Occasional physical demands include: Sitting, Climbing (e.g., stairs or ladders), Carry objects, Push/Pull, Twisting, Bending, Reaching forward, Reaching overhead, Squat/kneel/crawl, Wrist position deviation, Keyboard use/repetitive motion. Continuous physical demands include: Talk or Hear, Lifting Floor to Waist 25 lbs., Lifting Waist Level and Above 10 lbs. Sensory Requirements include: Accurate Near Vision, Accurate Far Vision, Moderate Depth Perception, Moderate Hearing. Anticipated Occupational Exposure Risks Include the following: Chemical, Dust/Particulate Matter. This position is eligible for the following benefits: • Retirement Savings and Investment Plan, • Disability Benefits Short Term Disability (STD), • Sick Time Off, • Employee Assistance Program The pay range listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining base salary and/or rate, several factors may be considered including, but not limited to location, years of relevant experience, education, credentials, negotiated contracts, budget, market data, and internal equity. Bonus and/or incentive eligibility are determined by role and level. The salary applies specifically to the position being advertised and does not include potential bonuses, incentive compensation, differential pay or other forms of compensation, compensation allowance, or benefits health or welfare. Actual total compensation may vary based on factors such as experience, skills, qualifications, and other relevant criteria.

About The Company SLG Services, Inc. performs turnkey outside-plant (OSP) telecom construction aerial and underground placement, fiber and coax splicing, testing and restoration as a single self-performing partner to leading communications providers. The Role Advanced journey-level technician performing the most complex OSP install, maintenance, diagnosis, testing and repair; can act as lead on a crew. Responsibilities Perform the most difficult/complex fiber and coax installations, maintenance and repair. Advanced testing/troubleshooting of fiber optic and HFC networks. Lead and guide install/construction crew members; serve as on-site lead hand. Interpret complex prints/specs; verify quality against Comcast standards. Maintain documentation, as-builts and inventory of tools/test gear. Qualifications 4+ yrs telecom/OSP field experience. Proven fiber & coax construction/testing capability. Valid driver's license; certified pole climber a plus. Company Values Safety first safety and wellness of employees, families and communities drive every decision. Privately held and family-oriented; invests in on-the-job training and internal growth. Proud partner of the DoW SkillBridge program for transitioning service members. Accountability, teamwork and ownership professionals who take ownership of their work and drive results. Benefits Danella offers competitive pay and a comprehensive benefits package, including medical, dental and vision insurance, life and disability coverage, 401(k), paid time off, and on-the-job training and advancement opportunities. Workplace Policy Notes and Equal Opportunity Statement Danella maintains a workplace completely free of drugs and alcohol; employees are subject to pre-employment and random drug testing. Company vehicles are fitted with GPS tracking and front/rear cameras. Valid driver's license (and CDL where noted) required for field roles. Danella is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military/veteran status, or any other characteristic protected by applicable federal, state, or local law.

Job DescriptionOptometric Technician - Long Term Care Facilities Location: Philadelphia, PA Schedule: 9:00am- 5:30pm Employment Type: 1099 Total Annual Compensation: $50,000-$60,000 ($8-$10 per pt.) About MedElite Since 2011, MedElite has been dedicated to improving the standard of care in skilled nursing and long-term care facilities nationwide. We implement a data-driven, "treat in place" model that enhances resident health outcomes while saving valuable time and resources for our partner organizations. By managing a network of advanced practice providers and specialty clinicians, we deliver high-quality, proactive care directly to the bedside. Our passion for positively impacting the lives of residents, administrators, and healthcare professionals drives our commitment to continuously innovate and redefine senior care across the country. Job Summary We are seeking a reliable and patient-focused Optometric Technician to join our growing team. In this role, you will assist optometrists with vision exams and eye health assessments for patients in skilled nursing and long-term care facilities. This position offers the opportunity to work closely with clinical providers while supporting the early detection and management of vision conditions in a geriatric population. Responsibilities • Assist optometrists with comprehensive eye exams and vision testing, • Perform preliminary testing, including visual acuity, intraocular pressure, and autorefractor measurements, • Prepare patients for examinations by explaining procedures and ensuring comfort, • Administer basic diagnostic tests such as visual field testing and retinal imaging, • Accurately document patient history, test results, and clinical findings, • Maintain and clean ophthalmic equipment in compliance with safety and infection control standards, • Support eyeglass fittings, adjustments, and patient education as needed, • Collaborate with optometrists, advanced practice providers, and facility staff, • Travel to skilled nursing and long-term care facilities as assigned Requirements • High school diploma or equivalent required, • Completion of an Optometric Technician or Ophthalmic Technician training program preferred, • Certification (e.g., CPO, ABO) preferred but not required, • Prior experience in optometry or ophthalmology strongly preferred, • Experience in skilled nursing or long-term care settings a plus, • Strong attention to detail and technical proficiency, • Excellent communication and patient-care skills, • Comfortable working with the geriatric population, • Prolonged standing/walking. Assisting with patient positioning. Operating diagnostic equipment. Lifting/moving patients., • Ability to travel as neededBenefits, • Competitive compensation per annum: $50,000 - $60,000, • Paid Time Off Why Work With Us? • Make a meaningful impact on the lives of seniors, • Work in a collaborative, mission-driven environment, • Enjoy work-life balance Equal Opportunity Employer Infinite Medical P.C is an equal-opportunity employer. We acknowledge and honor the fundamental value and dignity of all individuals. We pledge ourselves to crafting and maintaining an environment that respects diverse traditions, heritages, and experiences. Infinite Medical P.C is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Ready to Make a Difference? Apply today and help us deliver compassionate, personalized care where it matters most. #INDL

Job Description About GenScript Founded in 2002 in New Jersey, GenScript Biotech Corporation accelerates innovation in biotech and healthcare by providing researchers and companies with the building blocks needed to develop groundbreaking treatments and products. Guided by its mission to Make People and Nature Healthier Through Biotechnology, and its role as a well-recognized biotechnology company, GenScript has a team of approximately 6,165 employees and has served more than 200,000 customers across over 100 countries and regions. About ProBio: ProBio, a subsidiary of GenScript, is a global CDMO offering end-to-end services from discovery to GMP for plasmids, antibodies, and cell & gene therapies. We bring together multidisciplinary expertise to accelerate development and manufacturing through customized, and comprehensive services. ProBio has established companies in the United States, the Netherlands, South Korea, and China (Hong Kong, Shanghai, and Nanjing) and other regions to serve global customers, and has helped customers in the United States, Europe, Asia Pacific and other regions obtain more than 150 IND approvals since October 2017 Position Overview: The Engineering Technician is responsible for the manufacturing and laboratory equipment at the site. This includes performing activities and overseeing outside vendor activities required to support the Preventative Maintenance and Corrective Maintenance program in accordance with Good Manufacturing Procedures (GMP) regulations and company Standard Operating Procedures (SOPs). This includes ensuring that these activities are properly documented. Instrument services may be performed in but not limited to GMP, Good Lab Practices (GLP), Non-GMP process and laboratory areas. The incumbent works cross-functionally with internal departments and external resources as appropriate on maintenance and repair-related issues. Responsibilities: • Maintains and performs corrective and preventative maintenance and calibrations on GMP and non-GMP equipment., • Supports other departments to troubleshoot, test, repair and optimize instruments, equipment and control systems., • Participates in the continuous improvement efforts within the site Maintenance Program., • Assists in the maintenance and review of calibration standards and vendor calibration documentation., • Provides support for start-up, commissioning, and turnover of new systems., • Perform preventative and predictive maintenance on related clean utilities and systems that support Process Manufacturing., • Maintains water rooms and related equipment. This includes, but may not be limited to, pumps, motors, Deionized Water System, WFI stills, Clean Steam Generators and related piping., • Maintains all site refrigerators and freezers., • Troubleshoots and repairs all related clean utility equipment and systems and Water for Injection (WFI) point of use flushing., • Maintains documents and records on all validated equipment and systems., • Interfaces with other departments, contractors and disciplines on scheduling repairs and maintenance of clean utility systems., • Maintains up to date training records., • Communicates with management regarding change documentation, as necessary., • Follows current Good Manufacturing Practices (cGMPs)., • Communicates and coordinates with each department and within Facilities Management when planned and unplanned work events occur., • Perform additional job duties as required. Qualifications: • High School Diploma (or GED) with a minimum 5 years of facilities maintenance/operations experience in a pharmaceutical, biotechnology or related environment OR the equivalent combination of education and experience. Advanced knowledge of Preventive Maintenance and calibration disciplines within a cGMP Biotechnology, Pharmaceutical or related manufacturing environment., • Knowledge of cGMP, GXP, Good Automated Manufacturing Practice (GAMP), Software Development Life, • Cycle (SDLC) regulations, knowledge of pharmaceutical, manufacturing and laboratory systems and equipment., • Proficiency with Computerized Maintenance Management Systems (CMMS)., • Proficiency with Microsoft Office., • Excellent verbal and written communication and skills., • Ability to lift up to 50 lbs. and work in confined spaces, heights, and varying environmental conditions., • Must be able to stand, walk, bend, and climb ladders for extended periods., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Ability to work holidays and varying shift times/hours if required., • Must be able to respond to site emergencies ., • Ability to work independently and collaboratively, as required, in a fast-paced, matrixed, team environment consisting of internal and external team members., • Analytical thinker with excellent problem-solving skills and the ability to adapt to changing priorities and deadlines., • Excellent planning, organization and time management skills including the ability to support and prioritize multiple projects., • Refrigeration Technician background a plus but not required. Pay range is estimated between $85k - $105k based on skill set and experience. #PB #AH Benefits: Benefits include medical, dental, and vision insurance as well as a 401(k) retirement plan with a company match that vests fully on day one. We offer paid parental leave after just three (3) months of employment, and a paid time off policy that includes vacation time, personal time, sick time, floating holidays, and company holidays. Additional benefits include flexible spending and health savings accounts, life and AD&D insurance, short- and long-term disability coverage, legal assistance, and supplemental plans such as pet, critical illness, accident, and hospital indemnity insurance. We also provide commuter benefits, well-being initiatives, and peer-to-peer recognition programs; demonstrating our ongoing commitment to building a culture where our people feel empowered, supported, and inspired to do their best work. GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description EAM-Mosca Corp., Hazle Township PA, a dynamic market leader in the area of end-of-line automated packaging machinery and consumable strapping solutions, is seeking a driven Field Service Technician for the Trenton, NJ region. EAM-Mosca is privately held and retains a unique, focused, entrepreneurial culture. EAM-Mosca also enjoys a blue-chip client base of highly successful North and South American manufacturing companies and has a portfolio of products applicable to a variety of end-use markets. The key to the ongoing success of the business is a system-based product portfolio featuring standard as well as custom engineered packaging machinery solutions and a superior consumable packaging product, complimented by quality technical service and readily available aftersales parts support. The ideal candidate will have a wide range of responsibilities including maintenance, repair, and calibration of field equipment. The successful candidate will be a problem solver who is responsive to customers' needs. The Field service techs responsibilities include: • Install, Commission, equipment in a manner that ensures reliability and high customer satisfaction., • Perform preventative maintenance, Predictive Maintenance, Emergency repair on all EAM equipment., • Troubleshoot mechanical and electrical systems utilizing systematic thinking while employing test equipment and hand tools to discover faults and develop plans to report, plan and execute the planned solution., • Ability to work closely with Mosca Engineering to provide the highest level of customer service., • Generate service reports that explain the work provided, parts provided and clear understanding of the issue, the solution, and any follow up needed. All done in a timely and professional manner., • Communicate daily with the area service managers and develop schedules and travel itineraries that meet the needs of our customers and provide ample time to preform the work requested., • Work with a sense of urgency but remain calm under pressure to ensure the highest level of customer service. Skills Required • Advance understanding of machines and their systems to include but not limited to pneumatic, hydraulic, bearings, levers, channels, pulleys, cams, and camshafts, • Basic experience with Control systems utilizing Allen Bradley, Siemens and B&R PLC’s, • Electromechanical experience with conveyance systems, understanding sensors, electric motors and how they interact., • Able to use a multimeter, perform point to point, read electrical schematics and trace, • Able to use and read Calipers micrometers., • Able to take initiative and work independently on a regular basis, • Able to communicate clearly and professionally through both written and verbal medias: Web based service reporting, Video conferencing and face to face interactions., • Able to travel extensively within the U.S. Monday thru Friday. (80%) Team, Training and Support • In-house training with continuous on the job field training with senior field staff, • Company car, • Corporate expense account / credit card, • Company laptop and cell phone, • All required Personal Safety Equipment, • Company logoed clothing, • All supporting parts inventory needed for equipment maintenance, • Company supplied tools Experience and education • Minimum 3 years of field or plant equipment maintenance experience., • Corrugated Industry experience a plus, • Mechanical understanding of strapping machines, Mosca preferred, • High school diploma, • A valid driver's license, • Solid Mechanical / Electrical background, • PLC experience preferred, • Associates Degree a plus Excellent Pay and Benefits package • Medical, Dental and Vision benefits, • 401(k) retirement savings program, • Paid vacation and holidays, • Life Insurance, • Employee assistance programs EAM-Mosca is proud to be an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. Powered by JazzHR RyrhPJshum

Job Description Cultivation Technician, PAEthos Cannabis Website: www.ethoscannabis.com Company Overview Ethos Cannabis is a multi-state cannabis company with operations in the cultivation, processing and dispensing of cannabis in Pennsylvania, Massachusetts, and Ohio. Our goal is to have a clear and compelling consumer-centric vision focused on helping individuals feel and live better through their experiences with cannabis. Our mission is supported by our relationship with Jefferson Health, a leading academic medical center in the U.S., dedicated to collecting and analyzing valuable real-world data and developing educational initiatives with a focus on patient outcomes and quality of life. Jefferson Health is our Academic Clinical Research Center partner for our vertically integrated operations in Pennsylvania. Position Summary/ObjectiveCultivation Technicians are responsible for assisting the managers in the day-to-day functions of the cultivation production areas, including the propagation, cultivation, and harvest of cannabis plants. Successful Cultivation Technicians are energetic, detail-oriented, operational team players with strong communication skills and a can-do attitude. By closely following the training and guidance from the Management Team, Cultivation Technicians take the daily actions that result in the success of our crops and the quality of our product. Additionally, minimizing miscommunications and taking seriously the concerns of other cultivation team members ensures a safe and responsible workplace. We are seeking a passionate, driven, detail-oriented and collaborative Cultivation Technician to support the company's cultivation activities. The ideal candidate has the ability to adapt to our business model and is a collaborative team player but also a self-starter. Previous cannabis cultivation experience is not required. Role reports to the Cultivation Manager. ResponsibilitiesEnvironmental checks & ongoing observation Cloning Transplanting Pruning Trellising Harvesting Correctly utilizing appropriate checklists, logs, process flow charts, and standard operating procedures Cleaning & sanitizing Keep work and break areas free of clutter and debris Ensure work uniforms are as clean as possible Communicate effectively with others in cultivation and other departments Other duties as needed Update any personal information which may be required for contact, payment, benefits, tax purposes, or similar contained in an employee's personnel file Other duties as assignedQualificationsPreferred Experience, Education and Skills:Previous experience in a commercial cannabis setting is beneficial but not necessary Certification(s)/education in agricultural, horticultural, or botanical practices are beneficial but not necessary Education in agriculture, horticulture, or botany is beneficial but not necessary Other Requirements:Must be 21 years of age or older to apply Must comply with all legal or company regulations for working in the industry Ability to work weekends/holidays Ability to perform activities for up to 8 hours a day Extended time sitting, walking, bending, and reaching is possible Ability to lift and carry up to 55 pounds for a distance of 100 feet Must pass stringent background test requirements of PennsylvaniaPhysical Environment Conditions:Ability to perform essential job functions for extended periods (8-10 hours per day).Frequent activities may include sitting, walking, bending, climbing ladders, reaching, and frequent use of hands for handling, grasping, and repetitive motions.Must be able to lift and carry up to 55 pounds over a distance of up to 100 feet.Work may involve exposure to cannabis odors, airborne particles, fertilizers, and high humidity in cultivation or processing areas.Job duties may be performed in retail dispensaries, cultivation rooms, or post-harvest facilities, each with varied lighting and temperature conditions.Compensation: This position is classified as non-exempt and is eligible for overtime pay. Pay range is $17.50-$20.50 per hour.Ethos Cannabis is an equal opportunity employer and does not discriminate in the recruitment, selection, or advancement of employees on the basis of race, sex, color, national origin, creed, age, religion, marital status, disability, political affiliation, or on any other basis prohibited by law. Ethos is dedicated to creating and equal opportunity workplace and encourages women, minorities, persons with disabilities, and individuals with past drug convictions to apply. You must be 21 or older. Employment opportunities shall be provided for applicants with disabilities, and reasonable accommodation(s) shall be made to meet the physical or mental limitations of qualified applicants or employees. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements, and reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.