Aerospace engineer jobs in BathCreate job alerts

Senior Electronics EngineerLocation: Dorset (primarily onsite, with some hybrid working)We seek an engineer with recent high-integrity or safety-critical industry experience (defence, aerospace, or similar), or eligible for UK security clearance.We're supporting TKMS ATLAS UK in the search for a Senior Electronics Engineer to join their engineering team, developing advanced electronics and sub-systems for cutting-edge maritime defence programmes.This is an opportunity to work across the full product lifecycle, taking designs from initial concept and requirements capture through detailed design, verification, manufacture and customer acceptance.What you'll be doing Designing analogue, digital and mixed-signal electronic circuits and sub-systems.Producing schematics, PCB layouts and supporting design documentation using industry-standard CAD tools (Altium experience advantageous).Translating customer requirements into practical electronics designs and system architectures.Developing verification plans, test procedures and supporting product validation.Ensuring designs meet EMC, electrical safety, CE marking and applicable defence standards.Supporting prototype development, production, installation, customer trials and system commissioning.Investigating technical issues and implementing design improvements.Working closely with project teams, customers, suppliers and manufacturing to deliver high-quality engineering solutions.Mentoring junior engineers and contributing to continuous improvement within the engineering team.We're looking for experience in Electronic circuit design (analogue, digital and mixed-signal).PCB design and schematic capture (Altium preferred).Microcontrollers, microprocessors and associated interfaces (FPGA, RF or low-noise analogue experience is advantageous).Verification, testing and technical documentation.Design for EMC, electrical safety and compliance.Working through the full electronics development lifecycle within a structured engineering environment.This is an excellent opportunity to work on technically challenging defence programmes, contributing to innovative systems from concept through to delivery while collaborating with experienced multidisciplinary engineering teams.TPBN1_UKTJ

Assembly Engineer Bath £34,500 to £37,500 DOE (£17ph to £18.50ph) + Regular Overtime Opportunities (1.3x -1.5x) + Travel Bonuses + 25 Days Holiday + Bank Holidays + Training and Development Opportunities 39 Hours per Week – Monday to Thursday 07:30 to 16:30, Friday 07:30 to 12:30 Assembly Engineer required for an industry leading manufacturer of precision instruments due to continued company growth. You will be joining a well-established company with a history of over 80 years, holding a global reputation and client base. The company can offer in depth product training and development opportunities for the future. The successful candidate will need experience working as a fitter in a precise, low volume industry and can come from any manufacturing environment. This role is open to both mechanically and electrically biased candidates. You will need to be able to read and interpret engineering drawings. The Assembly Engineer will be joining a growing engineering team responsible for the assembly, calibration and service of high precision systems. You will be involved in both mechanical assembly and electrical wiring and integration. The Assembly Engineer Role: · Mechanical assembly of high precision systems used in industries including aerospace, data centres etc. · Electrical wiring and basic fault finding · Calibration of finished products · Regular overtime av...

Are you an experienced Quality Assurance professional looking to make a significant impact within the Defence and Aerospace sectors? Evodia Limited is partnering with a leading client to recruit a Quality Assurance Engineer based in Bristol, with the flexibility of hybrid working, requiring 2 to 3 days onsite each week. This role offers an exciting opportunity until 31 March 2027, with a competitive daily rate of up to £570 (inside IR35). If you hold SC clearance and have the right blend of industry knowledge and QA expertise, wed love to hear from you. About the Role As an Air RTW Quality Assurance Engineer, you'll play a key part in supporting government quality assurance frameworks, overseeing supplier performance, and promoting continuous improvement within the supply chain, especially in the Rotary Wing and UAS domains. You will manage governance activities, provide independent assurance on supply chain capability, and contribute to risk management strategies. Key Responsibilities • Deliver governance, assurance, and ongoing improvement within the Rotary Wing and UAS sectors via the Safety and Engineering teams., • Ensure supplier and product performance aligns with safety and airworthiness standards., • Support contractor selection and risk management processes to uphold government quality assurance benchmarks., • Promote best practices and continuous improvement in supply chain processes.What We're Looking For, • Registration with the CQI as Practitioner Grade (PCQI)., • Broad QA and manufacturing experience, gained through involvement in multiple projects and technical environments, with a focus on the Air domain (preferably Rotary Wing)., • Experience engaging with supply chains and knowledge of Configuration Management., • Engineering qualification at RQF Level 6 or professional registration with the Engineering Council as an Engineering Technician (EngTech)., • SC security clearance is a must.Next Steps If you're ready to bring your QA expertise to a challenging and rewarding role, we encourage you to apply now. Evodia Limited acts as an employment business for this vacancy, ensuring a transparent and straightforward recruitment process. Joining this project means working with a forward-thinking team committed to safety, quality, and continuous improvement, all within a highly respected Defence environment. JBRP1_UKTJ

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary Based at our Global Technology Centre Bristol we are looking for a Principal Engineer with a strong background in Systems Engineering to help shape the future of flight. Our aim is to deploy a modern systems engineering ethos across the broad domains within the portfolio (Software, Controls, Structures, Protoyping, Electrical & Cryogenic systems). Working in advancing technologies developing the key underpinning physics but also the methods, capabilities and evidence to support our prototypes, we want a dynamic and experienced individual to help us: • Provide technical leadership across the full technology engineering lifecycle through using Systems Engineering methods appropriate to our needs., • Evolve and grow our capability embedding this into each discipline within the portfolio & beyond to stakeholders and customers, • Ensure that systems engineering principles are applied consistently across the portfolio of programmes, • Champion the use of Model Based Enterprise toolsets to better manage technical projects, knowledge and progress. This role offers hybrid working. How You'll Contribute The Principal Research Engineer - Systems Engineering will contribute to the following: System Engineering leadership championing a systems thinking across the whole portfolio to align teams into a common alignment with the concept of Best Fit; Act as a technical authority and mentor across the portfolio in conjunction with the Tech Authority, manage reports and take responsibility for capability growth. System Engineering Framework Development & Deployment - Define and maintain a Systems Engineering Framework that aligns to technology development in aerospace and tailored for the organisations portfolio. Codebeamer Integration & Governance - Champion the use of Codebeamer as the tool for requirements capture and decomposition, Agile tasking across teams, Dash board Compliance reporting for safety, quality, and regulatory requirements, Wiki knowledge management. Manage team and execution Coach, support and develop the systems personnel reporting to the Principal Systems Engineer, including career progression, annual appraisals and clear goal setting. Develop a strategic plan for delivery of key systems programme aims. What You'll Bring Essential Skills & Experience: To help us make a difference, youll bring your passion and expertise/ talent for what you do along with the following skills, experience, qualifications and attributes: • Expert in systems engineering lifecycle (ISO/IEC 15288, INCOSE) with experience in MBSE (e.g. SysML), • Hands-on experience using Codebeamer (or similar tools) for requirements management, traceability, and reporting., • Strong knowledge of requirements elicitation, decomposition, interface management, V&V planning, especially in a technical development environment., • Framework & Process Development - Proven track record in defining and deploying SE frameworks across programmes, including championing change and mind-set development across teams and disciplines., • Ability to integrate tools (e.g., Codebeamer, modelling environments) into a coherent digital-thread approach., • Experienced in leading and mentoring cross-functional engineering teams., • Has good interpersonal and communication skills and can translate to a variety of audiences. Is confident and able to represent their project(s)/Function/Discipline in internal/external environment., • Education & Professional Standing; STEM degree with significant experience in systems engineering, Chartered Engineer (CEng), INCOSE CSEP/ESEP, or equivalent.What We'll Offer Once youre on board, youll get the following perks and benefits: • Competitive salary dependent on experience, • Up to 15% Bonus, • Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis (Employer max contribution 12%), • Life Assurance 8 x salary, • 25 days holiday + bank holidays, • Flexible working hours including the ability to finish at 12noon on a Friday, • Income protection, • Shopping discounts, • Cycle To Work Scheme, • Employee Assistance Programme, • Virtual GP Clinic for you and immediate family Well offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? JBRP1_UKTJ

A fantastic opportunity has arisen for an Electronic Systems Engineer to join a department to support system-level electronic design, integration, and equipment breakdown across complex electronic systems. Key Responsibilities: Lead and support system-level electronic design from concept through to production and deployment Define system architectures and break down complex electronic equipment into clear functions and subsystems Develop and manage interconnects between subsystems and external equipment Produce and maintain system schematics, wiring diagrams, block diagrams, and interface control documentation Support cross-functional collaboration with mechanical, software, firmware, and manufacturing teams Contribute to system integration, validation, acceptance testing, and operational deployment Support root cause analysis and resolution of system-level electronic issues Ensure designs meet safety, EMC, and relevant regulatory requirements The ideal candidate would have: Experience in system-level electronic or electrical engineering within complex systems Strong understanding of analogue and digital electronics principles Ability to define equipment architectures, interfaces, and interconnections Experience working across multidisciplinary engineering teams Knowledge of system design tools such as DOORS, MATLAB Simulink, or Rhapsody Familiarity with producing structured technical documentation and system schematics Exposure to regulated engineering environments such as aerospace, automotive, rail, medical, or defence The ideal candidate must have: Degree (or equivalent) in Electronic Engineering, Electrical Engineering, or a related discipline Proven experience in system-level electronic design and integration Ability to produce and interpret schematics, wiring diagrams, and technical system documentation Strong problem-solving skills with a structured engineering approach Excellent communication skills for technical collaboration and documentation This position offers a strong benefits package, which includes but is not limited to: Company performance bonus scheme Pension contribution of up to 14% combined (employer and employee) Opportunity for paid overtime Up to 15 days additional flexi leave Flexible and hybrid working arrangements Enhanced parental leave packages including maternity, paternity, adoption, and shared parental leave Healthcare cash plan covering optical, dental, wellbeing, and everyday healthcare costs Access to excellent on-site facilities including subsidised meals and free parking If this role looks like your next challenge, please contact Keelan ASAP or apply via this advert! Please note that due to the nature of the clients business, only candidates who currently hold full British Citizenship (without limitations) / Dual Nationality (inclusive of British Citizenship) will be considered. We endeavour to reply to every candidate, every time but if you havent heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential positions. JBRP1_UKTJ

Senior to Principal level PCB Layout Engineer Location: Berkshire based, looking for relocating candidates. Working Pattern: Full-time onsite due to work nature / exposure. Security Clearance: Must be eligible for Developed Vetting (DV) clearance. Shape the Future of Defence Technology Join a team at the cutting edge of defence and cyber technology, delivering advanced solutions that protect critical information and support mission-critical operations worldwide. Whether you're an experienced PCB Designer looking to step into a Senior role or an established Principal Engineer seeking greater technical influence, this is an opportunity to work on highly secure, technically challenging programmes that make a real-world impact. Our Cyber Business Unit develops advanced cryptographic and key management solutions, enabling secure communications across tactical and strategic defence environments. You'll play a key role in designing complex PCB solutions for ground-breaking research, development, and production programmes ranging from thousands to millions of pounds in value. The Opportunity As a Senior or Principal PCB Layout Engineer, you'll be responsible for the design and layout of complex multilayer PCBs (4-20 layers) across defence, aerospace, security, and space applications. You'll collaborate with multidisciplinary engineering teams to develop high-reliability hardware solutions, supporting projects from concept through to manufacture. Key responsibilities include: • Designing complex rigid, semi-rigid, and flex-rigid PCBs incorporating through, buried, and blind vias, • Producing layouts for analogue, RF, digital, power, and high-speed designs, • Ensuring designs meet EMC, signal integrity, security, and TEMPEST requirements, • Working closely with hardware engineers to define routing strategies, impedance control, and design constraints, • Incorporating DFM, DFT, and production test requirements into designs, • Liaising with PCB fabricators and assembly houses to support successful manufacture, • Supporting design reviews and contributing to continuous improvement initiatives, • Estimating design effort and delivering against programme schedules, • At Principal level, contributing to technical proposals, bids, and mentoring less experienced engineers What We're Looking For Essential: • Degree in Engineering, Science, Mathematics or equivalent industry experience, • Strong background in PCB design, routing, and layout of complex electronic assemblies, • Experience designing multilayer, high-density PCBs, • Expertise with industry-standard PCB design toolsets, • Excellent knowledge of IPC standards and routing best practices, • Proven track record delivering complex designs involving high-speed digital, RF, analogue, and power electronics, • Experience implementing DFM and DFT methodologies Highly Desirable: • Signal integrity analysis experience, • Understanding of power distribution and thermal design considerations, • Experience with Gerber and ODB++ data, • Altium Designer and/or PADS expertise, • Schematic capture experience, • Windchill version control knowledge Why Join? ? Up to 10% annual bonus. ? £5,000 annual DV allowance once achieved the clearance. ? Relocation opportunity available, case by case. ? Work on nationally significant cyber and defence programmes. ? Exposure to cutting-edge aerospace, space, and security technologies. ? Clear progression from Senior to Principal and beyond. If you're passionate about complex PCB design and want to work on projects that directly support national security and advanced technology development, I'd love to hear from you. JBRP1_UKTJ

Senior Electronics Engineer Bristol £55,000-£70,000 YT Technologies are currently partnering with Domin, a high-growth technology business that is fundamentally redefining motion control. They are combining additive manufacturing, fluid mechanics, and high-speed electric machinery to build the next generation of advanced hydraulic systems. They are looking for a Senior Electronics Engineer who wants to move beyond just contributing and start owning the hardware. They need a competent and Senior presence in their team, one who can mentor and also take some of the more complex workload. The Role: Technical Authority This is a pivotal hire for Domin. You won't be siloed into a narrow task; you will be the bridge between complex disciplines, responsible for the end-to-end electronics lifecycle of world-class products. Design & Deliver: Lead the architecture, schematic capture, and PCB layout for robust PCBA and electrical systems using Altium/Altium 365. Production Ownership: Drive the transition from initial prototyping and lab-based "bring-up" through to full-scale manufacturing. Collaborative Impact: Work closely with Mechanical, Controls, and Manufacturing teams to ensure seamless system integration. Standards & Quality: Act as the technical sign-off for designs, ensuring the highest standards are met while mentoring junior engineers within the team. The Candidate: Grit & Expertise Domin is an action-oriented environment. We are looking for an engineer who shows grit someone who stays committed through the uncertainty of R&D and moves decisively to turn ideas into outcomes. Experience: Ideally 10+ years within electronics design, with a proven track record of taking complex products to market. Technical Breadth: Proficiency in mixed-signal design, DFM/DFT principles, and root-cause analysis. Added Value: Experience in regulated industries (Aerospace/Automotive), EMC compliance, or designing for harsh environments (ATEX) would be a significant advantage. Why Domin? Key Benefits • Private medical insurance for all employees, • 5% employer pension contribution, independent of personal contribution (National, • Insurance savings passed on to employees through the pension scheme), • Annual bonus scheme, • Annual leave aligned to working pattern, typically 22 days for employees working a 9-day compressed fortnight or 27 days for employees working a full 10-day fortnight, • Enhanced maternity leave after two years service, including 3 months full pay, • Enhanced paternity leave after two years service, including 2 weeks full pay, • Paid sabbatical opportunities after 7 and 14 years service, • Option to work away from the office for up to 7 calendar days once per holiday year after 3 years service Life at Domin In addition to the core benefits, Domin provides a range of everyday benefits that support a positive, practical and rewarding working environment. These include: • Cycle to work scheme, • Flexible working policies, • Summer sports day, • Christmas party with partners, • High-quality tea and coffee, • Free unlimited snacks, • Monthly breakfast club If you are a Senior Electronics Engineer looking to make a tangible impact on a product roadmap, I want to hear from you. Please apply within JBRP1_UKTJ

Superb basic salary + 25% bonus + car, phone, laptop, private medical, pension Home-based| UK travel required Our client, a global design and manufacturing leader supplying OEMs across multiple sectors, is seeking a Technical Sales Engineer as part of ongoing UK growth. With year-on-year UK expansion this is an outstanding long-term career opportunity within a high-performing technical sales team. The Role:-- Reporting to the UK Country Manager, this is a balanced hunter/farmer position where you will: • Maximise sales from an established customer base while identifying and developing new business opportunities, following up on enquiries, • Deliver a design-in technical sales process, working closely with OEMs in sectors such as Aerospace, Industrial Machinery, Robotics, Packaging, Logistics and Rail, • Provide technical guidance, product expertise and solution-based consultation throughout the sales cycle, • Build strong relationships with engineering, procurement and technical teams, • Manage your own schedule in a home-based role, travelling across the UK to visit customers as required, • Attend occasional meetings at the companys UK office, • Excellent induction training provided About You To succeed in this role, you will have: • A degree (or HND) in an Engineering discipline, • At least 3 years experience in a technical sales environment (internal or field-based), • Strong technical aptitude and the ability to communicate engineering concepts clearly, • A proactive, ambitious and self-motivated approach to business development Package • Superb basic salary., • 25% bonus, • Company car, • Laptop, mobile phone, private health, pension, • Excellent long-term career prospects within a fast-growing global organisationTo apply for this excellent TechnicaL Sales Engineer role, send your CV to Carl Booth via this job portal, or phone Carl on 07766552676 JBRP1_UKTJ

Morson Talent are currently recruiting for a Manufacturing Engineer to work on the behalf of one of our prestigious Aerospace clients based in Yeovil, Somerset. This is initially a 5 month contract with possibility of extension. JOB ACCOUNTABILITIES This is an expert role within manufacturing engineering and could sit within any Production area of the Company. This role works independently with appropriate stamp and signatory / delegation approval or is technical owner for specific product or processes to deliver the: • Technical support,, • Manufacturing work instructions,, • Technical documentation and Tooling to support the manufacturing process,, • Develop improvements initiatives to enable production of world class products. YOU WILL: • Plan continuous assembly sequences and processes in order to achieve the build standard,, • Product quality, budget hours and delivery schedule (QCD) as defined by Programme Management., • Improve product manufacturing process and setting high standards. NICE TO HAVE: • Bill of materials, • Catia/Enovia (essential), • Electrical (essential), • Work Instructions, • SAP If this position is of interest to you, please apply below or contact Alex for more information, JBRP1_UKTJ

Software Engineer ADA Bristol (onsite) Initial 6-month contract £68ph, UMB, inside IR35 SC must be in place prior to starting the contract Overview of department: We're a driven team with a passion for software and its successful deployment in battlespace Command and Control (C2) weapon systems. We work on technology that is at the forefront of European missile system design, delivering safe, secure, and reliable products to our customers. Responsibilities: • We are looking for a capable, adaptable and inquisitive Ada software engineer (see expectations below) to join a small talented team to develop middleware solutions for the next generation of advanced missile systems., • Developing solutions targeting a large range of problems from hardware drivers to web services. This role provides a great opportunity for someone wanting to be involved in many differing areas of software., • Working across multiple applications on both land and maritime projects in the systems software department, this role allows for involvement in many of the most advanced missile systems in the world, across multiple warfare domains, and provides a great opportunity for someone wanting to be involved in many differing areas of software. Skillset/experience required: • A solid background in software engineering, ideally with development experience in a regulated software safety context e.g. Defence, Aerospace, Rail, Nuclear or Medical applications., • Experience with Ada (preferred) or good experience with C or C++., • Whilst this position is for Ada development, we welcome applicants with experience in other software languages such as C, C++ or Rust, as we have found that Ada can be mastered by capable and willing software engineers., • A passion for software engineering, with the ability to innovate and think critically to solve complex software problems with a willingness to develop software skillsets., • Knowledge of software design differences between Real-Time OSs and Hypervisors would be beneficial, as well as experience using Linux operating systems., • Comfortable working with a team in a collaborative environment, communicating and contributing to design and implementation decisions, and supporting with integration JBRP1_UKTJ

Job Title: CNC Miller Programmer Setter Operator Shift: Day shift Monday to Thursday 7.30am to 4.30pm Friday 7.30am to 12.30pm Location: North Bristol A great role with a fast-growing, established precision engineering business based in North Bristol. They are looking for a time-served CNC Miller to program, set and operate CNC Mills using Heidenhain controls. Key Responsibilities – CNC Miller Programmer Setter Operator • They will be required to accurately read and interpret technical drawings to correctly machine a variety of materials to customer specific processes and requirements, perform appropriate duties as assigned by management, maintain a safe and clean workspace and follow established safety rules and regulations., • Report breakdowns, equipment faults and concerns to Management, • Be actively involved in improvement activities to support the achievement of departmental and company objectives, • Ensure all lost time, minor and trivial accidents are reported, • Undertake continuous training and development, • Support the engineering team with quotations if required, • Assist in tooling buy off and trials, • Ability to self-inspect own work using precision inspection tools and devices, • Assembling, fitting, and repairing tools Qualifications & Requirements – CNC Miller Programmer Setter Operator • Good communication and interpersonal skills, • Effective problem-solving skills, • Ability to work alone or as part of a small team, • Good understanding of customer deliverables and the impact of failure/cost of poor quality, • Previous experience within the aerospace tool making industry advantageous, • Engineering apprenticeship as a tool maker or equivalent, • Minimum 5 years previous experience working in a tool making/engineering environment, • Experience working with an MRP system and following standard operating procedures / work order instructions, • The successful candidates will have the opportunity to become part of our strong team and enjoy the benefits of working in a friendly atmosphere for a long-established family company who care and support their employees and have a track record for training and developing staff. What we can offer – CNC Miller Programmer Setter Operator • 25 days annual holiday plus all bank holidays, • Competitive salary based on experience, • Overtime weekdays and 1.5 weekends, • A supportive, inclusive environment, • Ongoing training and development Call for action: For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to Candidates who are currently a CNC Machinist, Production Engineer, Toolmaker or CNC Setter may be suitable for this position For details of other opportunities available within your chosen field please visit our website Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. JBRP1_UKTJ

Job Title: Systems Engineer-Product Security (Edgewing) Location: Reading area. The role could be contracted to any BAE Systems AIR site but on commencement will immediately be assigned to our Edgewing JV in the Reading area. A financial support package may be available to enable this assignment if required, dependent on certain criteria being met. Due to the nature of this assignment, we envisage there will be a need for mostly on site working, however, flexible working arrangements may be possible please speak to your recruiter about the options for this role. Salary: £59,490+ (DOE) Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most. Youll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, theres no limit to where a career at BAE Systems could take you. Role Description: The Product Security Specialist ensures that security requirements are accurately applied to the design, development, validation and maintenance of GCAP products and systems. The Specialist provides domain expertise to assess risks, develops appropriate technical security controls, generates evidence for certification, and ensures compliance with policy, regulatory and contractual obligations. The role is hands-on, technical and deeply embedded in engineering and digital development activities, you will also support evidence generation required for Cybersecurity Airworthiness (DO-326B / ED-202B and related standards). Core Duties: • Apply product security requirements to system and subsystem design, ensuring compliance with contractual, legal and regulatory standards., • Produce and maintain product security engineering artifacts (risk assessments, control baselines, security posture statements)., • Execute the processes defined within the Product Security Management System (PSMS) and propose improvements when gaps or inefficiencies are identified., • Support evidence generation required for Cybersecurity, • Conduct security analyses, threat modelling and vulnerability assessments within the digital engineering environment., • Support incident investigations and maintain accurate records of product-security-relevant decisions. Essential Skills: • Experience in product, system or cyber security engineering industries. (Internal BAE Systems training is available for Product Security specialism), • An awareness of secure-by-design principles, threat modelling, risk assessment methodologies and security control design., • Practical knowledge of security policies, standards and good practice frameworks in highly regulated industries, • Experience working in model-based or digital engineering environments The Edgewing Team: By joining Edgewing, you will have a unique opportunity to help shape the company from the ground up setting the foundations for generations to come, influencing how we work, and helping us build something world-class together. At Edgewing, were united by a shared purpose to drive whats next in defence uniting UK, Italian, and Japanese expertise to shape the future of global defence. With trust at the heart of everything we do, we empower our people to dare to go beyond, bring their best as one, and leave a mark that matters on a truly global mission, making a lasting impact through work that truly matters. Why BAE Systems? Here youll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. Youll be recognised for your contribution and enjoy rewards tailored to whats most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a good sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: Were committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 14th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-JE1 #LI-Hybrid JBRP1_UKTJ

The Opportunity We're supporting a leading name in rotary-wing aircraft company who are looking to bring in an E3 / EMC Engineer to support a range of current and future helicopter programmes. This is a full lifecycle role, giving you exposure from early-stage design through to testing, certification, and in-service support across multiple platforms (including conventional helicopters, tiltrotors, and UAS). The Role You'll join a specialist E3 team responsible for ensuring aircraft systems operate safely and reliably in complex electromagnetic environments. Key responsibilities include: • Supporting design and integration of electrical/electronic systems with EMC considerations, • Planning and executing EMC / E3 verification and testing (lab, ground, and flight trials), • Producing compliance documentation (test plans, reports, analysis, certification evidence), • Supporting qualification and certification activities, • Working closely with cross-functional teams (systems, avionics, safety, mechanical), • Investigating and resolving EM-related issues across the product lifecycle What They're Looking For Essential: • Experience in E3 / EMC engineering within aerospace or other safety-critical industries, • Strong understanding of areas such as: o EMC o HIRF / Lightning Effects o EMP / Environmental effects • Experience supporting design, development, and verification activities, • Ability to produce and review technical documentation, • Strong communication skills across engineering teams Desirable: • Aerospace background (rotary-wing highly beneficial), • Experience working with certification bodies such as: o EASA o FAA • Knowledge of standards such as DO-160, MIL-STD-461, DEF STAN 59-411, • Exposure to systems engineering lifecycle and tools (e.g. DOORS), • Experience with EM simulation tools JBRP1_UKTJ

CNC Recruitment are looking for a skilled and reliable Quality Engineerto join our client in Yeovil a well-respected aerospace engineering company. Pay - £40,000 - £45,000 Per Annum Woking hours: Monday to Thursday 8.00am 5.30pm and Friday 8.00am to 12pm Job Type: Temp to Perm (Permanent after 16 weeks) Role Overview We are seeking a proactive and detail-oriented Quality Engineer with strong experience in Health & Safety to support and enhance our Business Management Systems while ensuring compliance with safety regulations. This role will play a key part in supporting our Quality Manager in driving continuous improvement, reducing risk, and promoting a culture of quality and safety across the organisation. Key Responsibilities Quality • Develop, implement, and maintain Business Management Systems (BMS) in line with AS9100 standards., • Conduct internal audits and support external audits, ensuring compliance with regulatory and customer requirements., • Analyse quality data, identify trends, and implement corrective and preventive actions (CAPA)., • Lead root cause analysis investigations using tools such as 8D and FMEA., • Collaborate with cross-functional teams to improve processes, reduce defects, and enhance product reliability., • Support in the management of customer returns, ensuring timely investigation and implementation of robust preventative actions., • Support initial and ongoing supplier approval management. Health & Safety • Ensure compliance with UK Health & Safety legislation, including the Health and Safety at Work Act 1974., • Conduct risk assessments and implement control measures to mitigate workplace hazards., • Promote a strong safety culture through training, awareness, and continuous improvement initiatives., • Investigate incidents, near misses, and non-conformities, ensuring thorough reporting and implementation of corrective and preventative actions., • Maintain and improve Health & Safety management systems., • Support the management and completion of inspections where required. Environmental • Support adherence to all applicable environmental legislation, including ROHS & REACH. Key Requirements Essential • Proven experience in a Quality Engineer role within a manufacturing, engineering, or industrial environment., • Strong working knowledge of Quality Management Systems and standards (e.g. AS9100)., • Minimum Internal Auditor certification (ISO9001 / AS9100)., • Demonstrable experience in Health & Safety practices and UK legislation., • Experience conducting audits, risk assessments, and incident investigations., • Proficiency in problem-solving methodologies (e.g. Root Cause Analysis, 8D)., • Excellent communication and stakeholder management skills. Desirable • Proven experience in a Quality Engineer role within an aerospace environment., • Lead Auditor certification (ISO9001 / AS9100)., • NEBOSH General Certificate (or equivalent Health & Safety qualification). Key Competencies • Strong analytical and problem-solving abilities., • High attention to detail and accuracy., • Ability to influence and drive change across teams., • Organised, with the ability to manage multiple priorities., • Commitment to continuous improvement and safety excellence. JBRP1_UKTJ

Role: Civil CAD Engineer (Swept Path Analysis / Traffic Management plans / Car Park Design / PVPI Design) - Hinkley C Nuclear Power Station project Location: Hinkley C site nr Bridgwater, Somerset (TA5 1UF) Salary: £35000 - £55000 + travel allowance Start: August 2026 onwards Morson Edge are delighted to present an exciting opportunity for a Civil CAD Engineer with experience in areas such as Site Traffic Management Plans, Swept Path Anlysis, Car Park and Site Compound Design and PVPI Design to work in support of EDFs Hinkley C nuclear power station construction project. The role will be based at the client's Hinkley Point 'C' site near Bridgwater, Somerset (TA5 1UF) 3 days/week with the rest worked from home. A little flexibility to these arrangements might be considered for the right candidate. Candidates will be required to obtain nuclear site security clearance for this role. Duties and Key Experience Based within the Construction Support Services team, candidates should possess: • Experence working in a drawing office with strong skills in 2D & 3D drawing production and drawing issuing/revision procedures., • Strong AutoCAD skills and be able to demonstrate their knowledge of orthographic projection, Plans, Sections, Elevations & Details Duties of the CAD Engneer will include production of the following: • Coordinate and update underground service diversions/removals with Construction Support Services team, • Site Traffic Management Plans, roads and walkway diversions and updates, • Updating relevant Hazard plans, • Swept path analysis and vehicle tracking, • Car park design, • Contractor compound design, • PVPI design and drawings, • Visualizations This position offers strong, long-term career development and growth potential working in support of the HPC project, as well as the future Sizewell C project. Individuals resident in the UK on a VISA will be happily considered, and sponsorship can be offered for the right candidate For the right candidate, our client can offer a highly competitive salary and generous benefits package, combined with the opportunity to work for a highly respected company at the forefront of the UK nuclear industry offering outstanding prospects for future career development and advancement. MORSON EDGE, part of the Morson Group, are the leading TECHNICAL & ENGINEERING RECRUITMENT COMPANY in the UK specialising in Technical Support to the following industries: Nuclear, Power Generation, Aerospace, Rail, Marine, Petrochemical & Construction JBRP1_UKTJ

Are you an experienced Human Factors Engineer with a background in Defence, Aerospace, or highly regulated engineering environments? Evodia Limited is working with a leading defence client to find a Human Factors Engineer to support critical safety and design assurance activities. This is an excellent opportunity to contribute to a major military programme, ensuring safety, usability, and system effectiveness for cutting-edge land vehicle technology. About the Role This contract role is based in Bristol, offering a flexible hybrid working pattern. You will report directly to the AJAX Engineering Lead, acting as the Human Factors Subject Matter Expert. Your work will involve collaborating closely with the prime contractor (General Dynamics) and military stakeholders to deliver vital human factors solutions, particularly in the aftermath of recent safety investigations. Your primary responsibilities include supporting demonstration, V&V, and system acceptance activities, as well as aiding the closure of critical safety actions following the Titan Storm incident. The successful candidate will influence design decisions, resolve human factors issues, and ensure compliance with safety requirements relevant to military operations. What Youll Bring • Proven experience in Human Factors Engineering (HFE) or Human Factors Integration (HFI)., • Background within Defence, Military, Aerospace, or regulated environments., • Experience supporting requirements verification, validation (V&V), and system acceptance., • Ability to evaluate and influence engineering designs where human factors are critical to safety and performance., • Strong stakeholder management skills, with the ability to work with industry partners, government, and end users., • Experience producing technical reports, evidence, and recommendations to support programme objectives., • A relevant degree in Human Factors, Ergonomics, Psychology, Engineering, or related discipline.Desirable Skills, • Previous involvement in the AJAX programme or military land systems., • Experience with safety investigations and lesson-learning activities., • Knowledge of Human Machine Interface (HMI) design and Human Systems Integration (HSI) methodologies., • Familiarity with MOD, DE&S, Dstl, or defence primes like BAE, Leonardo, or Thales., • Membership of CIEHF or equivalent.Details, • Location: Bristol (hybrid working, 3 days on-site), • Contract Duration: Until 31 March 2027 (with scope to extend), • Security Clearance: SC clearance minimum, • Day Rate: £420 to £570 (inside IR35), • Working Hours: 7.5 hours per day If youre ready to bring your expertise to a high-stakes project that makes a difference, wed love to hear from you. At Evodia Limited, were committed to supporting you through every step of the process. Apply now to become part of a team shaping the future of defence technology. This vacancy is advertised on behalf of our client, with Evodia Limited acting as the employment business. JBRP1_UKTJ

About the company We're partnered with a leading aerospace and engineering services provider operating within highly regulated, safety-critical environments. The organisation delivers specialist inspection, testing and training services to both internal teams and external customers, with a strong reputation for technical excellence and compliance. The business invests heavily in people, offering ongoing training, certification support and opportunities to work across national and international programmes. About the role An opportunity has arisen for an NDT Level 2 or Level 3 Instructor / Examiner / Engineer to join a specialist training and inspection team based in the Bristol area. This is a varied role combining technical instruction, examination and hands-on NDT inspection, supporting candidates through approved training programmes while also delivering inspection services for customers when required. Key responsibilities include: • Delivering high-quality NDT training courses to internal and external candidates, • Invigilating, examining and marking examinations in line with industry standards, • Supporting training administration, quality requirements and course preparation, • Undertaking NDT inspections across multiple methods at company and customer sites, • Maintaining training equipment, consumables and inspection documentation What you'll need • EN4179 Level 2 or Level 3 certification in one or more NDT methods (UT, PA, ET, PT, MT or RT), • Evidence of instructional or teaching capability (or willingness to obtain), • Strong written and verbal English communication skills, • Ability to work independently while supporting a collaborative team environment, • Full UK driving licence and willingness to travel occasionally, • A flexible, resilient mindset suited to a commercial training and inspection operation Apply now This is an excellent opportunity to step into a dual technical and instructional role within a respected aerospace organisation offering flexible working, strong benefits and clear development pathways. If you're an experienced NDT professional looking to combine inspection work with training and knowledge-sharing, we'd love to hear from you. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website. JBRP1_UKTJ

Job Title: Principal Engineer Product Safety Location: Barrow-in-Furness, Filton or Broad Oak Hybrid We offer a range of hybrid and flexible working arrangements please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most. Youll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all. From the depths of the ocean to the far reaches of space, theres no limit to where a career at BAE Systems could take you. What you will be doing: In this role, youll take a leading position in developing and managing Product Safety across complex engineering projects. You will work within a Systems Engineering framework to ensure safety is embedded throughout the project lifecycle, influencing design, build, and delivery decisions. Youll lead hazard identification and risk assessment activities, support the development of robust Safety Cases, and provide guidance to both senior stakeholders and junior team members. You will play a key role in ensuring safety standards are met, risks are effectively managed, and safety justifications are clear, evidence-based, and compliant. Core duties: • Develop, implement and maintain the Project Safety Management System, • Produce and manage Safety Management Plans and Justification Plans, • Lead hazard identification and risk assessment activities (e.g. FMEA, HAZOP, FTA, STPA), • Support the development and delivery of Safety Cases across the project lifecycle, • Conduct peer reviews, verification, and assurance of safety documentation, • Provide oversight and guidance to junior team members, • Interpret technical data and translate it into clear, robust safety arguments, • Engage with stakeholders across engineering, manufacturing, and project teams Essential skills • STEM degree or equivalent qualification, • Experience with safety analysis techniques (e.g. FMEA, HAZOP, FTA), • Experience developing Safety Cases and supporting documentation, • Experience working within a Project Safety Management System, • Understanding of Systems Engineering standards in a safety context The Safety & Environmental Team: The team plays a critical role in ensuring product safety across major programmes. As a Principal Engineer, you will lead the development and maintenance of Safety Management Systems and Safety Cases, while supporting the SSNA programme. You will also help resolve complex cross-disciplinary challenges and guide others in delivering high-quality safety outcomes. A place where everyone can thrive: Were committed to building an inclusive workplace where everyone feels valued and supported. A diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must achieve at least Baseline Personnel Security Standard, with some roles requiring higher levels of National Security Vetting. Why BAE Systems? Here youll build a career with purpose and real impact. With opportunities for lifelong learning and meaningful work, youll be supported to grow and succeed. Youll be recognised for your contribution and benefit from a range of rewards supporting your financial, personal, and professional wellbeing. Closing Date: 20th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, please submit your application as early as possible. #LI-KP1 #hybrid JBRP1_UKTJ

Morson Edege are actively looking for an Aircraft Avionic/ Electrical Engineer to join the Team based in Yeovil for our large aerospace client working on the AW101. Purpose: Perform maintenance on the Aw101 aircraft Ensure compliance with aviation regulations and safety standards. Experience: Experience as an Avionic/ Electrical Technician on any aircraft type may be considered. If this is of intere... JBRN1_UKTJ

Belcan Engineering Services is hiring on an Inside IR35 basis - 12 month Contract. Catia V5 Design - Hybrid working - Filton, Bristol BS34. As a Senior Design Engineer, you will join a long-term repair and modification programme, supporting the development and definition of wing structural design solutions. In this role, you'll work closely with stress, design, and project teams to deliver high-quality CAD models and drawings (Catia V5) in support of ongoing repair activities. What You'll Be Doing as a Senior Design Engineer? • Creating, updating, and maintaining parametric 3D models in Catia V5, • Producing accurate 2D detail and installation drawings, • Interpreting Airbus stress analysis data and project requirements to develop design solutions, • Managing interfaces between wing structural components and systems, • Considering manufacturing and installation constraints within design outputs, • Contributing to structural repair design activities What You'll Bring • Strong proficiency in Catia V5, • Experience creating high-quality parametric CAD models, • Ability to produce clear, accurate engineering drawings, • Ability to interpret stress and project inputs to produce design deliverables, • Awareness of manufacturing, installation, and repair processes About Us: Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and cyber security. This vacancy is being advertised by Belcan JBRP1_UKTJ

Senior/Principal Safety Engineer Defence Land Systems - ContractLocation: Abbey Wood, Bristol (Hybrid Working) Duration: Initial contract to September 2026 with further extensions Rate: £600-£650 per day (Inside IR35) Join ISE on a High-Profile Defence ProgrammeInfinity Systems Engineering (ISE) is seeking an experienced Senior Safety Engineer to support a major UK defence land systems programme. This role offers the opportunity to influence the safety assurance of operational military capability, working directly with MOD stakeholders, senior military personnel, equipment suppliers and engineering teams. You will be involved in safety management, hazard analysis, safety case development, design reviews, configuration change management, equipment trials and safety governance activities. This is an excellent opportunity for a capable safety professional looking to work on complex, high-consequence systems that directly support UK defence capability. Key Responsibilities • Lead and support system safety activities across military equipment programmes., • Review and develop Safety Cases, Hazard Logs and safety assurance documentation., • Chair Hazard Log Working Groups and safety governance meetings., • Support safety management planning and project initiation activities., • Review contractor safety submissions and safety assurance evidence., • Participate in design reviews and equipment trials., • Support configuration change processes and safety approvals., • Provide safety advice to senior MOD and project stakeholders.Essential Skills & Experience, • Significant experience in system safety engineering within a highly regulated industry such as defence, aerospace, rail, nuclear or automotive., • Demonstrable experience developing, reviewing and maintaining Safety Cases and Hazard Logs., • Strong stakeholder engagement and technical communication skills., • Experience leading technical safety meetings and working groups., • Familiarity with safety assurance throughout the engineering lifecycle., • Ability to work independently within a customer-facing environment.Desirable Experience, • Defence acquisition or military equipment experience., • Knowledge of Def Stan 00-056 and MOD safety assurance processes., • Experience supporting safety governance and design assurance activities., • Land systems, military vehicle or platform integration experience.Security & Travel RequirementsCurrent UK Security Clearance (SC) is mandatory. Candidates without an active SC clearance will not be considered.The role offers hybrid working; however, regular attendance at Abbey Wood (typically 23 days per week) is expected, together with occasional travel to supplier facilities in the Midlands. Applicants should be comfortable working closely with customer teams on MOD sites. Why Infinity Systems Engineering?ISE is a specialist systems, safety and assurance consultancy supporting some of the UK's most challenging defence and aerospace programmes. You'll join a team of highly experienced engineers who are trusted to solve complex technical problems and make a tangible contribution to national defence capability. JBRP1_UKTJ

Senior Systems Engineer Bristol - £60,000 to £75,000 Pension, Bonus, Flexible Working Excellent Career Progression Melbreck are working with a world leader who specialise in the design and manufacture of specialist systems for the aerospace sector. A business that has been around for over 80 years. Due to having a great start to 2026, and as part of their strategic succession planning, they are looking to increase their technical capabilities within their R&D Department. As such are looking for a talented Senior Systems Engineer to join their team ASAP. The role is heavily geared towards system safety, and this is a business-critical role. It is both key to ensuring the safety of current systems, but more importantly, systems that have not yet been conceived. You will be working in a fast-paced R&D team who are conceptualising the next generation aerospace systems. Systems that will define the aviation sector for the next two decades. Senior Systems Engineer Role Overview: As a senior systems engineer you will be responsible for helping to ensure that all products and systems meet both the requirements and the standards ARP4761 and ARP4754. You will also be developing and recommending solutions to meet functional hazard assessments, preliminary system safety assessments and system safety assessments Senior Systems Engineer Role Responsibilities: Analyse industry requirements to help create design proposals from scratch for new designs. Help, and lead, when necessary, design proposals to meet customer requests, and propose new designs to meet industry needs. Capture requirements, writing system and sub-system specifications and descriptions. Work through development assurance levels to understand potential failures, using fault tree analysis, failure mode effects analysis, and common cause analysis, on new systems. Model solutions. Deliver design reviews. Validate design solutions. Create verification specifications and standard operating procedures for testing and verification. Over time, become the subject matter expert of system safety. Systems Engineer Candidate Requirements: Bachelors degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline, ideally aerospace. Possess good all-round knowledge of electronic systems. Have previous working knowledge of ARP4761 and ARP4754, or demonstrable experience from a safety critical industry and proven capability at working on complete systems or products. (e.g. medical devices, defence or nuclear) Knowledge of the aerospace product area and domain with a breadth of knowledge of industry practices, techniques, regulations, and policies, would be a significant advantage. Be proficient with engineering design and analysis tools. Ability to travel when required to US locations and Mainland Europe to support aircraft testing. Senior Systems Engineer Hours and Benefits: 37.5 hours per week Monday to Friday 4 days in the office, 1 day working from home Up to 10% bonus Up to 17% pension Excellent employee welfare schemes and programs Senior Systems Engineer? Want to find out more? Click APPLY NOW! JBRP1_UKTJ

World Class Defence Organisation is currently looking to recruit a number of Mechanical Systems Engineer / Architects on an initial 6 month contract. The department can have the role based from either the Stevenage, Bristol or Bolton sites. This role would suit a candidate who comes from a strong background of working as a Mechanical Design Engineer, Mechanical Systems Engineer, Mechanical Architect or has experience of Mechanical Systems Architecture. A defence / aerospace background is ideal but not essential. DOORS experiencewould be great. Rate:£60.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at time and a quarter Location: Stevenage, Bolton or Bristol depending on your preference Hybrid / Remote working: 3-4 days onsite needed. Will be 5 days onsite to begin with due to training needs Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Mechanical Systems Engineer / Architect Job Description: We have an opportunity for an experienced Mechanical Architect to join the team. This exciting role is to gather and manage the missile mechanical architecture requirements to achieve missile performance, on time and on cost and overall layout vs compliance. This involves providing justification of the design and co-ordinate the verification evidence of missile performance to support certification. Responsibilities: The role is responsible for the delivery of the missile mechanical architecture requirements and typical responsibilities include: • Establishing the Missile Airframe Task Requirements Specification (TRS) to ensure a structured & coherent mechanical response to the overall Missile TRS, • Management of the mechanical interface with the launcher, • Management of Mechanical & Thermal Interfaces across the Missile, • Defining the optimum mechanical architecture for all variants of the missile, ensuring the mechanical architecture and interfaces meet requirements, • Implementation of GMA Policies to ensure Modularity & Reuse objectives are achieved, • Development of the overall proving logic for the validation of the Airframe, • Ensuring mechanical compliance to the Airframe TRS for missile certificate of design, • Interface with and manage customer expectations throughout the development process, • Producing Statements of Work and plans for activities within their sphere of responsibility, • Direct technical supervision of engineers within their team and indirect management of engineers in the extended project team, • Controlling assigned budgets, managing personal workload and identifying any further resource needs Skillset/experience required: • Educated to degree level with 10 years experience or an equivalent qualification having obtained significant experience of mechanical engineering, • Ability to technically manage internal & sub-contract activities, • Strong leadership skills, able to establish a clear engineering vision, • Good knowledge & experience of mechanical design, including: Static & Dynamic Analysis, Design for Environment or Thermal Management., • Good understanding of broader engineering disciplines, including:, • Aerodynamics, • Testability, • Production, • Experience developing proving logic and managing the generation of compliance evidence towards Certificates of Design, • Experience across the full Product Life Cycle, • Ability to influence senior managers and other stakeholders, • Strong interpersonal and well developed communication skills (written & verbal), • Willingness to travel within UK and Europe, • DOORS experience wouldbe great JBRP1_UKTJ

Morson Edge are seeking an experienced Project Engineer to join our prestigious aerospace client based in Yeovil, Somerset. Job Purpose: • To be the prime engineering working level focal point for a particular project or platform by:, • together multi-functional support and engineering solutions., • To combine the above with the ability to work as part of the joint industry/MoD team responsible for delivering all aspects of technical support., • Responsible for co-ordination and management of task and query responses to customer requested timelines. Key accountabilities: • During the design/modification process interacting directly with the designers providing the design context for their solutions and ensuring that the certification basis for the design is understood, • Ensuring that certification compliance plans are created and satisfied as part of the design process, • Solving design integration issues where more than one system is involved in the design, • Applying the appropriate Configuration Management processes, • Compiling material for PDR and CDR, • Managing the drawing structure and the applicability of any modification to the fleet (including prototypes), • Assist in continuing airworthiness management by monitoring in-service arisings and assisting in any resulting investigations and design or inspection regime changes., • Preparing any necessary Service Bulletins/Engineering Technical Instructions and major repairs (in collaboration with CS&S-PSE) To minimise the technical response times of technical queries to achieve or exceed flying hour targets through driving Technically, Role Success will be measured against Key Performance Indicators (KPI) and your ability to provide engineering advice and solutions in response to customer requirements. Skills, knowledge and experience required: • Higher education approved STEM qualification., • Apprenticeship/HNC/HND/First degree level as a minimum or equivalent as recognised by professional accreditation schemes or equivalent level of experience in aerospace engineering., • Typically meets the requirements for registration as an Incorporated or Chartered Engineer with the engineering Council and preferably is a member of a relevant Professional Body., • High level of knowledge of aircraft MAA regulations., • Capability to autonomously work with external vendor's and produce requirement specifications or statements of work, • Knowledge of the Systems Engineer Process, • Knowledge of the requirements management – ability to work in DOORS an advantage, • Knowledge of the configuration management – ability to use SAP and advantage, • Ability to review and critically assess own work and to peer review the work of others inside a small functional team ensuring that the resulting actions are implemented., • Experience of managing the interaction between related technical disciplines in a functional team is desirable., • Confidence and ability to challenge/ respond to technical/process issues and ability to interact effectively with customers and suppliers. If you have the required experience for this position, please apply today or contact Lisa Nardiello on 01935 713323 for further information. JBRP1_UKTJ

About The Role Engineered to Protect, thats our promise, we protect what matters - our nations, our waters, our land, our cities, our people, our environment, our world.Support the delivery of mechanical analysis activities within the engineering team by applying knowledge of structural, thermal, and fluid flow analysis using classical calculation methods and FEA/CFD simulation tools. Senior Mechanical Analysis Engineer will be based at either our Beckington, Bristol or Barnstaple sites. This role allows for flexible working. The salary for this role is up to £54k, depending on experience. Whatyoullbedoing • Assist with engineering analyses through use of appropriate tools and techniques, to include FEA, hand calculations, technical studies, and development activities to support projects across the business and help deliver high-quality engineering solutions, • Support the development of engineering capability within the Mechanical Engineering function by applying knowledge of classical calculation techniques and simulation analysis tools such as Abaqus, Ansys, or similarAbout our company At SEA, we develop and deliver advanced solutions to make our world safer, cleaner and more efficient. We provide state-of-the-art applications for naval ship and fleet protection, and undersea surveillance systems. In-service across the globe, our systems deliver a rapid response to threats and system effectiveness and interoperation. Our systems support an ever-growing number of navies across the world, and we continue to bolster our already specialist, on-the-ground knowledge of key overseas markets. What we offer At our core, we encourage innovation, flexibility and out-of-the-box thinking to solve problems, so were always looking for talented, flexible, and creative people to bring their best to SEA. In return we offer generous rewards, a fantastic work/life balance, and excellent career and training opportunities for everyone who joins. Havea look atthe benefits we offer: Work life balance • Hybrid/flexible working arrangements, • 25 days annual leave, plus buy and sell, • Up to 16 days flexi leave accrual, • Half day Fridays, • Reservists in theArmedForces receive special paid leaveFamily & wellbeing, • Private medical health insurance & Employee Assistance Program, • All Staff Bonus, • Group Pension Plan of up to 7% employer contribution, • Cycle to work scheme, • Wellbeing Centre, • Sports & Social activities, • Employee Discounts portal - online and in-store discounts, travel savings, • Life assurance policy, • Publication and recruitment bonus rewards, • Development opportunities, including LinkedIn learningFacilities & resources, • Electric vehicle charging points at all sites, • Private seated lunch areas, • Onsite bistro (Barnstaple office) and free hot and cold beverages, • Onsite showers and toiletries provision, • Free onsite parkingTheskills you need, • Degree qualified within a mechanical (or equivalent) engineering discipline or relevant experience, • Experience in the design, qualification, manufacture and in service support of mechanical hardware for both commercial and military environments, • Experience in the detailed and system level design of hardware, • Good understanding of mechanical analysis techniques for both classical and computational methods, • Specific knowledge of the following aspects of mechanical design and analysis:, • Fundamental mechanical principles and materials, • Static and Dynamic Stress Analysis (linear and non-linear methods), • Dynamic Stress Analysis, • Thermal Analysis and fluid flow, • Defense Marine and Subsea Technologies, Aerospace, • Dimensioning & Tolerancing, • Technical Product Documentation, • Proficient in one or more of the following:, • Abaqus, • ANSYS (FEA or CFD), • COMSOL Multiphysics, • Solidworks simulation suiteJoin us and be part of something smaller - with500people in the UK and Canada - doing something bigger: protecting what matters. If youd like to know more, please give Kelly Thomas from our Talent Acquisition Team a call on 03330 414300. Or reach out to us on JBRP1_UKTJ

We have a new exciting and career defining opportunity for a Senior Engineer Systems Engineering to join our growing Aircraft Systems Engineering team. Reporting to the Principal Research Engineer for Systems Engineering, you will be responsible for Systems Engineering from requirements elucidatio

Morson Edge are currently seeking an Aircraft Schedule Maintenance Engineer on a contracting basis in Yeovil, for one of our Aerospace/ Defence clients. Assess and implement continuous improvement initiatives within the Integrated Operational Support maintenance organisation to reduce aircraft maint

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. The successful candidate will take on the role of Principal Rese

Morson Talent are currently recruiting for an Electrical Design Engineer to work on the behalf of one of our prestigious clients based in Yeovil. This is a contract role, initially for 12 months, with possibility of extension. Our clients in Yeovil are seeking an experienced Electronics Engineer to support the design and development of advanced electronic controllers used in Environmental Control Systems and Life Support Systems. Our products are used across nearly every commercial, defence, and space aircraft platform, contributing to safer, more efficient, and more innovative aerospace solutions. The Yeovil site is a major design, development, and manufacturing centre, offering world class test and qualification facilities and a rich aviation heritage. You will join our Electronic Controllers team - a multidisciplinary group responsible for designing high integrity hardware that integrates with specialised software to meet stringent aerospace requirements. Role Overview This role focuses on full lifecycle electronics engineering, supporting projects from initial concept and documentation through detailed design, test, verification, manufacturing support, and in service issue resolution. We are seeking an engineer with strong analogue/digital/power circuit design skills, ideally from aerospace or another highly regulated industry (e.g., nuclear, defence, rail). Naval design experience would be beneficial for this particular role. Key Responsibilities • Support end to end electronics design lifecycle, from concept and requirements through production and in service support., • Define and document electronics requirements, design plans, and specifications., • Design analogue and digital circuits, progressing concepts through to complete PCB layouts and full manufacturing drawing packs., • Produce all supporting design, verification, and test documentation required for certification and manufacturing., • Participate in and contribute to design reviews, clearly communicating technical content to both technical and non technical stakeholders., • Ensure compliance with all relevant quality processes, standards, and regulatory requirements., • Work closely with internal manufacturing teams and external suppliers to ensure smooth new product introduction, including PCB build, assembly, test, and system integration., • Provide expert technical support for manufacturing issues and in service investigations across the product range. Required Qualifications & Experience • Experience in Electronics Engineering or a related discipline., • Electronics design experience within aerospace or another highly regulated sector (e.g., nuclear, rail)., • Strong understanding of electronics design principles and industry best practices., • Proficient in low power digital circuit design., • Solid understanding of low frequency analogue interface design., • Experience using industry standard ECAD tools (Mentor Graphics preferred)., • Knowledge of DFM (Design for Manufacture) and DFT (Design for Test) methodologies., • Familiarity with EMC design and qualification requirements., • Strong analytical and problem solving abilities., • Excellent communication skills with strong attention to detail. Desirable • PCB layout experience Work Hours • 37hrs per week minimum. Standard core hours: 09:00-16:00 Monday-Thursday, 09:00-12:00 on Friday, with some flexibility. What We Offer • Opportunity to work on industry leading aerospace technology with a global brand., • Inclusive culture that values diversity, equity, and innovation., • Reasonable accommodations available for candidates with disabilities throughout the recruitment and employment process. If this position is of interest to you, please apply below or contact Alex for more information. JBRP1_UKTJ

Mechanical Design Engineer Bath, (Hybrid Available) £45,000 - £50,000 + Benefits Are you a Mechanical Design Engineer looking for an opportunity to work on innovative diagnostic technology? We are working with a rapidly growing technology company developing cutting-edge diagnostic products used within healthcare environments. Due to continued growth and ongoing product development activities, they are seeking a Mechanical Design Engineer to join their Product Development team. This is not a manufacturing engineering role. Instead, you will focus on the ongoing enhancement of an existing commercial product, supporting design improvements, product performance, reliability and lifecycle management through a structured design control process. The Role Working within a multidisciplinary R&D team, you will take ownership of design updates and engineering changes, ensuring products continue to evolve and improve following commercial launch. Key responsibilities include: Updating and improving existing product designs using CAD Managing engineering changes through formal change control processes Conducting physical testing and evaluation activities to support product improvements Investigating product issues and supporting root cause analysis activities Creating and maintaining engineering documentation, drawings and specifications Supporting Design Failure Mode and Effects Analysis (DFMEA) activities Working closely with suppliers and manufacturing partners to resolve technical issues Supporting verification and validation activities Maintaining product documentation in line with quality and regulatory requirements About You We are looking for an engineer with experience working within a regulated industry such as medical devices, diagnostics, aerospace or another highly controlled engineering environment. You will ideally have: Degree qualification in Mechanical Engineering or a related discipline Commercial experience in product design and development Strong CAD skills, ideally using SolidWorks Experience managing design changes through formal change control processes Knowledge of DFMEA and risk management activities Experience carrying out product testing and supporting engineering investigations Strong documentation and technical report writing skills Experience working within a quality management system Desirable Experience ISO 13485 or FDA-regulated environments Medical device, diagnostics or life science products Product verification and validation activities Design transfer and supplier management Root cause analysis methodologies PDM systems and configuration managementApplicants must have the unrestricted right to work in the UK. Unfortunately, sponsorship is not available for this position. If this sounds like you then please apply now

Degree in Mechanical / Aerospace Engineering (Master's level preferred). At Vertical Aerospace, we are pioneering the way for electric aviation. We won't realise our mission following the same legacy processes and traditions our predecessors followed; instead, we want to 'redefine' aerospace best pr

The Project Engineer works closely with Program Managers, engineering teams, customers, and global stakeholders to mature advanced technologies from concept through demonstration and transition. This role combines strong engineering expertise with project management capabilities to ensure successful

Certain Advantage is looking for an Electrical Design Engineer in Filton to work on developing architectures for data acquisition and control systems. The position involves collaborating with a leading aerospace company to create electrical component designs and specifications for new test facilitie

Energy Jobline CVL is seeking an Electrical Engineer to join a high-performing team developing advanced flight simulation technology. This role involves designing, developing, and delivering electrical hardware solutions in a fast-paced aerospace innovation environment. The ideal candidate will have

A global aerospace leader in the UK is seeking a Performance and Dynamics Engineer to work on major programmes in their Systems Engineering team. Responsible for delivering performance and dynamic analysis for aircraft systems, the ideal candidate should have a degree in Engineering and experience w

Airbus Operations Limited in Filton is seeking a Senior Fatigue & Damage Tolerance (F&DT) Engineer (Delegated Signatory) to lead F&DT analysis and signatory activities within a dynamic Wing Analysis Engineering Team.

A leading aerospace firm in the UK seeks a Senior Mechanical Design Engineer (Team Lead) to manage mechanical design projects and ensure compliance with regulatory standards.

A leading engineering consultancy in the UK is looking for a Lead Mechanical Design and Analysis Engineer. You will be responsible for the design and development of complex mechanical systems for challenging aerospace, energy, and defense projects.

Ideal candidates will have a mechanical or aerospace engineering degree, experience in analytical disciplines, fatigue knowledge, and the ability to work within regulated environments. Rolls-Royce is seeking experienced Mechanical Integrity & Analysis Engineers to support Defence opportunities acros

SII Czech Republic is seeking experienced Mechanical Design Engineers to support high-profile aerospace and defence programmes.