Armed security jobs in Letchworth Garden City - Page 2Create job alerts

Electronics Design Engineer Defence Systems Our client, a long-standing partner to the UK Ministry of Defence, is seeking an experienced Electronics Design Engineer to join a high-performing team developing advanced defence technologies. Based in Stevenage, this role offers the opportunity to work on complex missile systems, contributing to the full lifecycle of electronic design within a highly collaborative, multi-disciplinary environment. Key Responsibilities Design and develop electronic solutions for weapon systems, including onboard missile sub-systems and land, sea, and air-based firing units Deliver electronic designs from concept through to production, with a strong focus on Power and Analog Electronics at sub-system and board level Ensure product quality, performance, and compliance throughout the development lifecycle Provide accurate cost and schedule updates to support effective project tracking Collaborate with Software, Firmware, Mechanical, Environmental, and EMC teams to meet technical and regulatory requirements Contribute to the delivery of high-performance missile solutions aligned with operational and customer needs What Youll Need Degree in Electronic Engineering (or equivalent) with significant post-qualification experience Proven experience delivering complex electronic designs within regulated or safety-critical environments Ability to lead and influence technical workstreams within multi-disciplinary teams Strong problem-solving capability and broad knowledge of electronic technologies Clear, effective communication skills with the ability to engage stakeholders at all levels What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: Our clients relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air. This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees. TPBN1_UKTJ

Our client, a leading and trusted collaborator with the UKs Ministry of Defence, is seeking a skilled and dedicated Manufacturing Controller Stores (FLT) to join their cutting-edge facility in Stevenage. This role involves overseeing the loading, control, and monitoring of work packages within a high-tech manufacturing environment. The ideal candidate will bring proven experience in stores management, production lineside operations, or manufacturing control, with a strong focus on operational efficiency and attention to detail. Key Responsibilities: Apply manufacturing control processes and demonstrate proficiency with ERP systems such as SAP. Manage inventory operations, including issuing, receiving, and maintaining stock within a structured stores environment. Oversee stock control and storekeeping, ensuring compliance and monitoring of critical shelf-life items. Load manufacturing cells with scheduled jobs, aligning with lead times, cycle times, and delivery targets. Support packing operations using hand tools and manage tooling for issue and return. Execute kitting activities by assembling and preparing components for efficient production. Safely load and unload goods vehicles, ensuring accurate documentation and smooth material flow. What do you need?: Proven experience in manufacturing control and stores operations within a steady-paced production environment. Flexible and reliable, with the ability to follow detailed instructions and adapt to varying shift patterns. Strong attention to detail and capable of working independently with minimal supervision. Trained in manual handling and Electrostatic Discharge (ESD) procedures to ensure safe and compliant material handling. Certified in lifting and slinging operations, including the use of overhead cranes for safe movement of heavy components. Desirable skills: Demonstrated experience in line-side stores and manufacturing control environments (note: general warehousing experience not applicable). Proficient in PC-based tasks, including strong working knowledge of Microsoft Excel for inventory tracking and reporting. Holds a valid Forklift Truck (FLT) licence and up-to-date medical clearance for operating material handling equipment. Familiar with lean manufacturing principles, including Kanban and two-bin systems for efficient stock replenishment. Experienced in using Enterprise Resource Planning (ERP) systems such as SAP for inventory management and production support. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees. TPBN1_UKTJ

An exciting opportunity has arisen for an Electronics Engineer to join our rapidly growing Calibration & Maintenance team in Stevenage. Salary: Circa £44,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking an Electronics Engineer to join our Calibration & Maintenance Team, to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE). The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business; including supporting routine calibrations, commissioning, drift analysis, fault finding and repair of test equipment. You will be working within an experienced team of Calibration & Maintenance Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. What we're looking for from you: Minimum qualification: HNC/HND in Electrical & Electronics Engineering. Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Strong analytical and problem-solving skills. Knowledge of SAP an advantage.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An exciting opportunity has arisen for a New Product Introduction (NPI) Quality Assurance Engineer to join the Product Assurance team as they provide professional quality support to the Manufacturing team in the UK across all NPI Programs. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: Minimum 3 days per week on-site, due to workload classification Security Clearance: British Citizen. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity: You will provide an independent visibility and assurance that manufacturing and related processes are correctly applied across all NPI Programs. You will provide support and advice on all aspects of quality within New Product Introduction. You will provide support in the identification and implementation of sustainable process improvements to existing methods and processes. You will support Manufacturing in the identification and reduction of project risk or problem areas / issues associated with process application, process effectiveness or compliance across all NPI programs. Reporting to the Product Assurance Manager, responsibilities include the following activities: Provision of professional support and advice on all aspects of quality within NPI Manufacturing UK; apply quality expertise to critical business issues to support business excellence, continuous improvement and customer satisfaction. Provision of quality assurance assistance to NPI Manufacturing UK in support of manufacturing excellence including development and delivery of quality awareness and other process and quality-related training. Supporting Manufacturing UK on all NPI programmes to achieve cost, time and quality targets. Assessing and controlling the product assurance quality processes and the resulting outputs. Assuring to and implemented in Company production programmes, and providing the appropriate level of support to improve the effectivity of processes used by the Company Business Management System is correctly tailored within NPI Confirm through a programme of Independent assessments and audits that processes and quality requirements are being successfully implemented, applied, and improved. Provide reports to Management that identifies the outcome of audits and issues. Monitor and facilitate the progression of any improvements from audit activities and the timely closure of identified issues. Maintaining strong links with Quality Assurance colleagues across MBDA (UK and Overseas) to enable the dissemination and achievement of Quality Objectives within NPI Manufacturing UK. Work with Product Assurance Managers and other functions to define appropriate risk reduction strategies/action plans Provide advice and help in the use of SAP as the non-conformance management tool and identify SAP improvement with respect to the Quality Module. Facilitation and/or support to various levels of Non-Conformance Review Panels Analysis of non-conformance defect data and acting on this data to undertake problem solving investigations identifying defect root cause and corrective action implementation. Assure compliance to the company BMS requirements within NPI manufacturing Support DFMEAs giving a manufacturing perspective, driving producibility. Facilitate PFMEAs for NPI products, ensuring they are suitably reviewed and kept topical throughout the NPI process Assuring early adoption and compliance to the Industrial Validation BMS Supporting lessons learnt activities and facilitating the outcomes of these into future programs of work Support the creation and update of Manufacturing Proposals by providing appropriate data and lesson learnt. Ensuring these are then appropriately captured within the Manufacturing Requirements Support and provide appropriate input to Design and PG Reviews What are the benefits for you? Working in a high technology environment ranging from the manufacture of CCA assemblies through to live build of weapon systems, your broad range of skill and expertise will be called upon to support quality and process improvement initiatives as we drive to maintain our reputation as a leading manufacturer of guided weapon systems Become a member of a well-established and value added team within a world leading Defence business, directly supporting the delivery of assured, complex weapons systems to both internal and external customers. Opportunities to develop personal, profession and behavioural skills to enable future further progression with the function and business What we're looking for from you: Ideally qualified to minimum HNC/HND in relevant subject. Quality professional, experienced in process-based integrated management systems & business improvement in an engineering / manufacturing environment. Experience using both risk management and practical problem solving tools e.g. 8D, 5Y, PFMEA etc. Good working knowledge of Microsoft Office packages (PowerPoint, Word and Excel) Quality Auditing experience required Knowledge and experience of EN/AS9100 Excellent interpersonal skills Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Capability to identify sustainable business improvements & ensure effective implementation Recognise and understand internal and external customer requirements, and respond to them Ability to communicate and influence effectively at all levels of the organisation Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Recognise and understand regulatory and certification requirements, and respond to them Understanding of AS9145 APQP/PPAP - Desirable Understanding of AS9102 -First Article Inspection Requirements Position is based in Stevenage, but will require regular support to Manufacturing at other MBDA sites, including Bolton and Henlow. Travel (both UK and international) will be required. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

This is a fantastic opportunity to join a busy RF Design Team supporting the RF testing and development of some of the most cutting edge and exciting projects in the defence industry. Salary: Circa £30,000-£45,000 depending on experience Location: Stevenage (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: Typically for this role you will work 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: We have a fantastic opportunity to join a busy RF Design Team supporting the RF testing and development of some of the most cutting edge and exciting projects in the defence industry. Our team is looking for an RF Laboratory Technician to provide day to day support to the RF Designers across various tasks including testing, component level assembly and rework, mainly on development or prototype boards. You'll use your experience of RF circuits and components covering a wide frequency range up to high GHz, as well as fault finding, rework, soldering and use of general laboratory equipment. Training and guidance will be provided for the right candidate. What we're looking for from you: Familiar with RF Circuits and components across a wide range of frequencies Practical skills - soldering and rework at SMT component level - ideally qualified to IPC 610 but training can be provided, fault finding and RF component level assembly Use of RF Laboratory Test Equipment - Spectrum Analysers, VNA's, Power meters Ability to perform automated testing - MATLAB, Python & LabView. Self-starter - well organised, motivated and shows initiative.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

We are expanding our team and seeking skilled Missile Test Lead Architects to join us! Join our exceptional team and be part of our exciting growth journey! Salary: Circa £64,000 depending on experience Dynamic (hybrid) working: typically 2 to 3 days per week on-site, due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to 21.25% (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As a Missile Test Lead Architect, you will play a crucial role in overseeing test design considerations, ensuring their implementation across project development. Your responsibilities include specifying missile level pass out tests, in-service, and BIT routines. Collaboration with manufacturing and design teams is key to ensuring comprehensive testability of the product and addressing any test coverage gaps efficiently. As a Lead Test Architect you will be responsible for - Lead a team of Test Architects as part of the Missile Design team As a senior member of the TTA department support the department head and provide functional leadership Take ownership of the missile test equipment specification and delivery Ensure that product testability is built in to the design Generate and manage compliance with lower-level test requirements for design teams, including test access needs, BIT coverage/timings, and factory test functionality. Analyse and model our system to determine test coverage and generate diagnostic instructions. Work closely with the Chief Design Engineer to make cost vs test coverage trade-offs. What we're looking for from you: Substantial experience of test equipment design, product testability or electrical/electronic engineering Proficient in at least one of the following areas: digital electronics and microprocessor systems, analogue electronics, electronics testing, or test equipment design Experience in people leadership and influencing A good understanding of gathering requirements, overseeing projects, creating plans, and managing relationships with key customers Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

We are looking for a talented engineering professional with an eye for detail and experience of working with and controlling product data. Job Title: Senior Configuration Engineer Salary: Circa £42,000 depending on experience Location: Stevenage (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: 2 -3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship., Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunities The opportunity: We are looking for a talented engineering professional with an eye for detail and experience of working with and controlling product data. Using your previous product configuration experience, you will work within a close and motivated team to provide direct support to many of our key business products. You will also have the opportunity to develop your configuration skills as well as work towards professional accreditation. What we're looking for from you: A background in Configuration Control or Technical Data Management within a Defence or Aerospace industry or similar. Evidential experience in interpreting technical data and Bills of Materials for large and complex product assemblies. Familiar with the principles of Configuration Management within an aerospace or defence setting; preparing and handling Configuration Management documentation which is used to provide governance and control of project activities. Experience of managing and implementing engineering design changes across a multi-stakeholder environment, including the preparation and presentation of changes within change control meetings. Ability to support audits on our suppliers, ensuring Configuration Management processes are observed throughout our supply chain. Strong team working and communication skills which enable close and collaborative working with peers, as well as functional and project stakeholders. You should have an eye for detail and able to apply that with integrity with respect to controlling engineering data, drawings and CAD models. Ideally you will have experience of PTC Windchill as a Product Lifecycle Management tool. Interested? Click Apply Now! Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

Stevenage We have an opportunity for an experienced aerospace Fuel Systems engineer to join our dynamic team on fast paced and exciting projects. Our team delivers fuel system design solutions, requirements and proving across a range of defence projects! Salary: up to £60,000 depending on experience Dynamic (hybrid) working: typically, 3 days per week on-site due, to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: This role will focus on fluid mechanical equipment within the fuel system, and the co-ordination of various verification activities (test, modelling, analysis) for new development programmes. The tasks can include feasibility studies, system specification and design, trade-off studies, liaison with suppliers, and co-ordination with suppliers and partner organisations to progress verification activities. The role will include travel to France to witness testing and take part in progress meetings. The role could include some 1-D fluid Modelling, and validation of existing models using SimCenter Amesim. Our team engages with the missile architects and propulsion engineers to develop the best fuel system for the application. This is a chance to be actively involved in the development and test of a new fuel system, and work within a small team to develop MBDA fuels systems capability. You will be joining a small, but enthusiastic team, working on a range of world class projects. What we're looking for from you: An appropriate Degree or Masters e.g. Aerospace Engineering, Mechanical Engineering, Physics. Knowledge of fluid-mechanical design for fluid system components A working knowledge of at least one fluid system modelling tool, such as Amesim or Flomaster or SimScape. An ability to develop concept design solutions with limited information and changing requirements Ideal candidates will have: Knowledge of air vehicle fuel system design Knowledge of Jet Fuels Have the ability to visualise and analyse complex systems Have a good understanding of, and good working experience in, all phases of the engineering life cycle Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

An exciting opportunity for a Mechanical Manufacturing Technician to join team in a fast-paced, friendly and inclusive, busy workshop based at our Stevenage site. Salary: Circa £43,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This opportunity is for a Mechanical Inspector to join the Manufacturing team supporting inspection and certification of a variety of mechanical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds have been manufactured in accordance with drawing requirements and specifications and are free from damage; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring any non-conformances are processed and controlled correctly; Ensuring that all manufacturing documentation is complete and carries the necessary certifications; Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Practiced in the inspection of mechanical hardware including damage and build integrity Attention to detail Good analytical skills The ability to produce work to a very high standard ESD/ FOD awareness experience would be advantageous Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

We're looking for a Senior Software Engineer to join our team and take our technology and your career into new territories! MBDA is a great a place to learn about the company's entire product portfolio, whilst embracing the change to DevOps and other innovative technologies! Job Title: Senior Software Engineer Salary: £40,000-£75,000 depending on experience Location: Stevenage (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: Typically for this role you will work 3-5 days per week on-site due to workload classification. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: Maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more.The opportunity: We're looking for a Senior Software Engineer to join our team and take our technology and your career into new territories! Test Software UK collaborate across Electronic Engineering, our Test Centre of Excellence and Software Engineering to deliver the MBDA UK test capability. Our mission as a function is to facilitate robust and timely test of missile systems and ensure MBDA continues to provide a decisive military capability for our home nations and their allies. Spanning a diverse portfolio of work packages, Test Software UK directly influences the company's product certification, manufacturing output and support activities. Specifically, Test Software UK are responsible for developing and supporting software packages that utilise Test Equipment hardware to configure, verify and validate the conformance and quality of our MBDA UK product range from development, through production and into field test scenarios. We are a multi-disciplined, dynamic, focused and agile team specialising in all aspects of test solution design, including software, hardware, simulation and real-time systems. What we're looking for from you: A software engineer or electronics engineer with transferable talent into software development for test solutions: Strong ability to write software in one of the following languages; C, C++ or ADA and motivated to develop reliable, high performance, standardised and documented software Excellent analytical and design ability, including review and critical analysis 'Can do' and flexible approach - you'll enjoy solving technical problems that sometimes extend beyond the bounds of "software" Keen to work on novel products where the software you produce is time and mission critical Ability to communicate effectively with multiple stakeholders, including Systems Engineering, Electronics and Electrical and Test and ValidationOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Stevenage Would you like to be part of a group of specialist engineers helping to deliver some of the world's most sophisticated defence systems? We are currently recruiting for a software security expert, to work across a range of our products! Salary: Circa £74,000 depending on experience Dynamic (hybrid) working: 3 to 5 days per week on-site, due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. This role is an SC security clearance role and the successful candidate must also be willing to go through the DV clearance process. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: It's a great place to learn about the company's entire product range within a team that is embracing innovative technologies. Key aspects of this role include: The primary focus of this role is to guide the security aspects of product development across the whole product lifecycle, from concept through to in-service support The provision of technical expertise to our software development teams and wider project teams, offering guidance on security requirements, security techniques, software architecture, design patterns, coding standards, trade-offs, and best practices. Participating in the evaluation and selection of appropriate technologies and frameworks for software projects. Conducting security assessments and risk analyses of technologies and software systems, by identifying potential vulnerabilities and threats, and developing mitigation strategies. Supporting continuous improvement, through identifying areas for process improvement, contributing to the development and implementation of software development methodologies, tools, and frameworks. Maintaining accurate and up-to-date documentation of security processes, procedures, and guidelines. Generating security reports and metrics to track security-related activities, vulnerabilities, and remediation efforts. In Software Engineering at MBDA you will find: Engineering is at heart of our business; there is opportunity to both develop your core leadership skills, and gain a wider appreciation of sophisticated software systems. Working alongside a multi-disciplined engineering team, you will be a key part of a supportive and growing software engineering team as your career expands with us. What we're looking for from you: You'll already have experience developing complex software products in the Defence, Automotive, Aerospace or Telecoms sectors (or a similar field) Experience of software security with knowledge of industry security standards, and best practices. A natural collaborator who is a technical leader, with good communication and influencing skills, comfortable with problem solving and technical challenges. You'll have an interest in novel and emerging technologies, and the challenges that face the Security community. It would be beneficial to have experience developing embedded software and/or firmware, but not essential You'll have a degree or equivalent experience in a STEM (Science, Technology, Engineering, Mathematics) subject or similar, and be comfortable working with engineers from other disciplines Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RS1

Stevenage As a Future Products Principal Systems Engineer within the newly formed Future Products department; part of Missile Design UK: Emerging Portfolio & Capability function, you will be assigned to take on a variety of roles in support of MBDA's Vision 2040. Salary: Circa £55,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As a Future Products Principal Systems Engineer within the newly formed Future Products department; part of Missile Design UK: Emerging Portfolio & Capability function, you will be assigned to take on a variety of roles in support of MBDA's Vision 2040. Early phase design cycle skills combining core System Engineering, Business development, Customer & User engagements, technology applicability and new functionality areas. Road-mapping / Requirement elicitation, bidding for new work, understanding capability, corralling multi-disciplinary teams. Develop & nurture new skills for Early Phase activities. This could include using System Design tools, such as DOORS for requirements, Rhapsody for Model Based Systems Engineering (MBSE) and Design Maturity Assessments. Support multiple products across future systems and new business areas.What we're looking for from you: Knowledge of DOORS, Rhapsody and systems design analysis tools e.g. Pugh Matrix / QFD / etc, Good Systems Engineering knowledge, alongside the ability and desire to test new techniques and use new methods to develop concepts and complete system trade studies; Experience of weapons systems and missile design, including systems trade studies is beneficial; A solid understanding of weapon systems, platforms and missile sub-systems; The confidence to embrace the uncertain nature of early concept development and technologies to progress towards defining solutions and system concepts; To be able to negotiate and influence a broad range of internal and external partners to secure the right outcome; Experience of planning and task management important;Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

An exciting opportunity for a passionate Linux enthusiast to join a unique, multi-national Information Management function. Ideal candidates should be committed to the future of software defined data centres and open source technologies and have the dedication in supporting our engineering community in a dynamic, fast paced development environment. Salary: Circa £55,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification. Security Clearance: British Citizen This role will require DV Clearance. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking an experienced HPC Engineer to support the design, implementation and ongoing operation of high-performance computing platforms with a strong Linux system/administration background. As a HPC engineer you will be responsible for maintaining and optimising infrastructure, providing technical assistance to our user community ensuring reliable, secure and efficient system performance. You will manage and maintain HPC environments including compute nodes, storage and interconnects. The role involves close collaboration within your team and wider stakeholders across the organisation. You will also engage with wider multi-national and multi-cultured teams to drive capability development cross functionally. Become part of a unique, well respected team of dedicated people that have been recognised within our company for its professionalism, dedication and flexibility. Having the opportunity to work both nationally and internationally, broaden your horizons by embracing the rich cultural diversity of our company. Partner with both engineers within MBDA and HPC vendors to ensure HPC services are meeting evolving business needs. Be part of an organisation with a values-led culture that is committed to investing in its workforce with a personal development programme.What we're looking for from you: Strong Linux system administration skills (installation, configuration, patching and troubleshooting) Experience of HPC job schedulers and workload managers e.g., SLURM Understanding of HPC interconnects such as InfiniBand and cluster networking Knowledge of HPC storage systems such as GPFS, NFS Familiarity with compilers, libraries and parallel programming models Scripting and automation (Bash, Python, Ansible) for administration and monitoring Knowledge of monitoring tools (Nagios, Prometheus, Grafana) Knowledge of containerisation and virtualisation for HPC (Singularity/Apptainer, Docker, Kubernetes) Strong knowledge of data security practices within HPC environments. Strong communication skills to provide efficient user support and liaising with vendors. Knowledge of IT service management and governance frameworks such as ITIL to follow incident, change and request processes.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Mechanical Engineering is excited to offer multiple opportunities for experienced Principal Mechanical Design Engineers, with roles available across all areas of the Product Life Cycle, from mechanical future concepts and detailed design through qualification, production, and in-service support. In these roles of responsibility, you will lead the development of mechanical solutions for a wide variety of complex weapons and weapon systems, working closely with multi-disciplinary teams across engineering, manufacturing, quality, and supply chain. You will be expected to provide technical leadership, drive design maturity, and act as a key interface with internal and external stakeholders. Salary: Circa £50,000+ depending on experience Location: Stevenage (relocation package may be available) Dynamic (Hybrid) Working: An average of 2-3 days per week on-site dependent on work classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity: The roles offer the chance to lead complex mechanical design work packages on critical defence products and influence design decisions across the full life cycle. You will play a key role in ensuring designs meet performance, safety, cost, and schedule requirements. The roles provide excellent long-term career progression opportunities within MBDA, including further technical leadership or engineering management pathways. Appointments will be made at an appropriate level based on skills and experience. What we're looking for from you: Ideally Degree, HND, or HNC in Mechanical Engineering (or equivalent) with significant industry experience Proven ability to lead mechanical design work packages within multi-disciplinary teams Strong experience across full product life cycles, from concept to in-service support In-depth knowledge of design proving and qualification activities Robust hands-on experience with design methodologies such as DFMEA, DFA, and DFM Strong communication skills with the ability to influence, negotiate, and make technical decisions Experience engaging with and developing suppliers and external partners Ability to manage priorities, assess risk, and mentor less experienced engineers Understanding of structural, thermal, and/or dynamic analysis (advantageous) Relevant 3D CAD/CAE experience (training provided on company tools) Note: This role may involve UK travel and occasional European travel. Interested? Click Apply Now! Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

MBDA has a fantastic opportunity for a Cable / Harness Design Engineer to work within our growing Interconnects team designing bespoke electrical interconnects/cables suitable for the transmission of power, signal and data within and between subsystems in our products. Salary: Circa £40000 depending on experience Dynamic (hybrid) working: 2-3 days a week onsite Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: MBDA has a fantastic opportunity for a Cable / Harness Design Engineer to work within our growing Interconnects team designing bespoke electrical interconnects/cables suitable for the transmission of power, signal and data within and between subsystems in our products. To do this you will need to interpret sub-system requirements and, from these, generate electrical schematics and cable design definitions on CAD and Zuken E3. You will need to be able to carry out investigations into a full range of cable problems and issues; developing and preparing solutions, either individually or as a member of a project team. The role also includes support to manufacturing in order to resolve any manufacturing issues, as well as supporting functional and environmental product trials. This role provides a wide scope of tasks and a unique opportunity to broaden technically within a growing company and high capability design teams. Exposure to complex and technologically advanced projects and products provides a stimulating experience. Working with highly talented and motivated engineers, in a friendly and supportive environment, provides one of the best environments to further career aspirations and achieve a real feeling of success. What we're looking for from you: Individuals will need to have demonstrable experience in cable/harness design, using relevant CAD packages such as Zuken E3 and HarnWare. The ideal candidate will have: A minimum 2 years' experience in the use of E3.Cable and related products (E3.Formboard/ E3.3D Transformer beneficial). A proven ability to define, deploy, and refine processes and best practices within E3. - including; electrical topology, wiring schematics and 2D manufacturing drawing processes and standards. Proven ability to develop and deliver technical instruction to E3 users. Thorough understanding of product data management and change management within Windchill or similar. The ability to design cable assemblies based upon electrical constraints such as current, screening, signal types, volt drop, EMC and environmental requirements. An appreciation of cable assembly production/process engineering. Experience of PTC CREO Cabling would be beneficial.Due to the nature of our work, experience of military Defence Standards and a working knowledge of D38999 connectors in support of cable harness manufacture is highly desirable. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

A challenging, stimulating and dynamic opportunity has arisen within Integration and System Validation (ISV) for a Ground Trials Engineer to join the FCAS/W team. The programme is entering a critical phase of expansion and thus looking for additional committed team members. Salary: Circa £ 45,000 -£55,000 depending on experience Dynamic (hybrid) working: 3-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: The ISV Ground Trials Engineer carries out a range of technical, engineering and scientific activities. They will analyse, interpret and evaluate technical information, concepts and ideas. This specific role reports into the Ground Trials Team Lead and is primarily expected to contribute (applying existing knowledge, or input from senior team members, of underlying Ordnance Munitions and Explosives principles) to the development and implementation of long-term system safety proving plans and test activities. The role involves working with various teams across MBDA and with UK, French and Italian national authorities. Joining the Ground Trials team includes additional opportunities to develop in and contribute towards other exciting test activities such as Electromagnetic Compatibility, Mechanical & Climatic or Engine test. This role would suit an engineer with practical experience looking to build on existing (or to develop new) skills on an important and significant future project with wide exposure to a variety of technical disciplines and teams. What we're looking for from you: Essential skills: Ability to work autonomously or as part of a wider specialist team Taking responsibility for the quality of work undertaken (deliver value to the team) Proactive in finding solutions to problems (identifying improvements and proposing innovative ideas) Ability to report/communicate technical aspects to both technical and non-technical audiences.Useful (but not essential) experience: Ordnance Munitions and Explosives trials and test (areas may include: mechanical/climatic, EMC, insensitive munitions, chemical analysis). Knowledge and use of military safety regulations, policies and standards (particularly those relating to Safety and Suitability for Service). Knowledge of safety assessment processes and risk management approaches. Practical knowledge (mechanical, electrical or software) and/or in a trials/test environment (e.g. use of test equipment, process and procedures) Project management processes (and how to incorporate into the work environment with a wide range of stakeholders)Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

MBDA is looking to recruit a Systems Design Engineer to work on their CAMM family product line, focussed on the development of activities around software updates and missile system performance. Salary: Up to £57,000 depending on experience. Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification. Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year). Pension: maximum total (employer and employee) contribution of up to 14%. Overtime: opportunity for paid overtime. Flexi Leave: Up to 15 additional days. Flexible working: We welcome applicants who are looking for flexible working arrangements. Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . Overview of the department: As one of two System Design Functions in Missile Architecture and Validation UK, System Design Missiles (SDM) is focused on providing Systems Engineering skills to Missile Systems programmes. As such we provide systems engineering skills to the project teams to establish requirements, system architectures and to guide the Verification & validation process leading to product certification and acceptance by the Customer and their assurance agencies. As part of the system level assurance role we provide system level performance, security and safety assurance. The opportunity You will join the CAMM Family Systems Design team working within the Systems Software and Performance team. This team is responsible for the coordination and delivery of munition software updates and spiral development programmes, as well as the planning and conduct of technical studies into missile performance, using complex mathematical models, to help the project understand key system design choices or to estimate key performance indicators such as range and terminal accuracy, among others. The team works on the full systems lifecycle of these programmes, from the requirements, architecture, proving strategies and generation of evidence in support of certification. A key responsibility of the team is coordination of the functional strand domain, coordinating teams including: Seekers, Guidance, Control and Navigation, Simulation and Modelling, Lethality, Software and Hardware in the Loop, to deliver software spiral programmes to improve munition robustness and performance. We also work with the three weapon systems teams that use CAMM as their munition, and with international colleagues in MBDA Italy on the CAMM-ER programme. Engagement with the MoD and their external agencies, as well as military personnel using the CAMM family and export customers is also a responsibility for the team. A significant upcoming task for the team is to re-design the software and firmware within the CAMM and CAMM-ER munitions to embody new functionality, updated security features and work across a new hardware platform. The team delivers these activities for CAMM and CAMM-ER across the multitude of variants and programmes under development (Spirals, Obsolescence phase 1, Obsolescence phase 2, German Content Removal Programme, Italy and Poland Transfer of Technology (ToT) etc). The role is to conduct these engineering activities for CAMM family products, and there is the opportunity to take a role leading the tasks for a particular contract for the right candidate. The team is relatively small so there is huge scope to shape and grow whilst developing your own technical knowledge and competencies as you progress within MBDA. What is the role: Delivery of systems engineering activities associated with software updates and spiral development. This can include: Requirements elicitation and management System architecture design, justification and traceability Interface Definitions Proving Strategies and Plans Performance modelling Conduct of Design Reviews Coordination of multiple stakeholders to deliver software products that are fit for purpose.What we're looking for from you: Systems engineering experience at multiple phases of the lifecycle such as requirements, system architecture, verification and certification. Systems engineering experience in system performance and the functional chain domain would be beneficial. Possess excellent analytical and problem solving skills and the capability to write clear, concise engineering documentation. Good verbal communication, listening and time management skills. A desire to develop and grow your systems engineering skills, and to improve the systems engineering methods used within the team. Ability to engage with subject matter experts and grow your knowledge of new technical areas.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

This is a fantastic opportunity for an Engineering Project Coordinator to learn from our more experienced Project Managers and teams around you before taking on your own projects and developing into an Engineering Project Manager. Salary: Up to £45,000 (depending on experience) Location: Stevenage Dynamic (hybrid) working: Where possible, we will seek to accommodate a blended approach to on-site and remote working - such as being onsite when necessary to work with people and collaborate, then working from home and around family commitments to be your most efficient. This role can be full time or part time: 4 or 5 days per week. We are flexible and accommodating. It would be beneficial to be on-site 1 or 2 days a week, depending on the project needs and working remotely other days. Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much moreThe opportunity: We are Electronics Engineering. We are growing, dedicated, and we work as a team to deliver our projects. As an Engineering Project Coordinator (EPC) you'll support the Engineering Project Management teams to deliver our projects to time, cost and quality.This will involve a mix of project delivery work, bid management and supply chain management. It's a fantastic opportunity to shadow our more experienced Engineering Project Managers, learn from them and the teams around you before taking on your own projects and developing into an Engineering Project Manager. There are creative opportunities in MBDA, for example, to take part in outreach representing Electronics Engineering in your community and becoming in involved in women-in-engineering events. What we're looking for from you: We're looking for proactive, experienced and dynamic individuals with the ability to multi-task and work with people of diverse backgrounds; individuals with excellent communication skills and the ability to influence others to their way of thinking. Candidates will be able to demonstrate: A technical degree (ideally in Electronics) Demonstrable exposure to / understanding of electronic engineering product development A solid track record of experience working within an engineering context A good grasp of project management fundamentals, basic Primavera P6 scheduling experience and the ability to manipulate data in Excel.Most important for us is that you have the right attitude and a passion to develop - we can offer the training and support you need to enable you to broaden your skills and experience and take your first steps into a project manager role. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

We have a great opportunity for a skilled and adaptable Verification and Validation (V&V) Test Engineer to join our Real-Time Embedded software department! Salary: Circa £64,000 depending on experience Dynamic (hybrid) working: typically, 4 days per week on-site, due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Spanning a diverse portfolio of work packages, you will be working with teams of enthusiastic, dedicated engineers to qualify components of some of the world's most sophisticated defence systems! If you have experience of verification and validation in an advanced technological environment, ideally with a background in embedded software development, then we would like to talk to you. The role requires taking requirements, developing them into robust test cases, preparing and executing tests, capturing data, and delivering actionable feedback to project teams. You will have to draw upon your strong practical problem-solving skills, data acquisition expertise, and adaptability. What we're looking for from you: Strong experience of Verification and Validation (V&V) activities in an embedded software environment . Embedded software development experience using Ada. Experience of turning requirements into structured test cases and procedures. Experience of working in a lab environment on an electro mechanical product running embedded software. Good working knowledge of the complete software engineering lifecycle. Scripting abilities Desirable, but not essential Safety critical systems experience Knowledge of standards such as DefStan 00-55, DO-178C & DO-330 Knowledge of Real Time Operating Systems Model Driven Design experience Knowledge of test automation methods Knowledge of DOORS, Engineering Workflow Management (EWM), Rapita Suite, Rhapsody, LDRA Breakpoint Analysis experience Experience of Focused Code Reviews Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RS1

The Opportunity: A world leader in Missiles and Missile Systems, MBDA is a multi-national group, employing 18,000 employees across Europe. An exciting opportunity has arisen for an experienced Integrated Logistics Support (ILS) Manager to join our Customer Support & Services (CSS) team. The successful candidate will be responsible for leading and delivering ILS activities for future Domestic and Export customers across two of our in-service Missile Systems. The ILS Managers role is to influence the system design and to design a support solution in order to ensure our ability to provide effective through-life support to our products upon entry to service. Salary:Up to £65,000 depending on experience Dynamic (hybrid) working: 1-2 days a week in the office Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to 21% (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...Key Responsibilities: Lead the development and implementation of ILS strategies and plans in line with customer and contractual requirements embedded within the Project Design Authority Manage ILS activities across the full lifecycle, including concept, design, manufacture through to in service. The specific products for this role are in the manufacture phase, however as your career develops you would expect to move to different products in different phases of their life cycle. Developing a robust Through Life Support Policy Ensure compliance with relevant ASD S-Series standards as required, including (but not limited to): S1000D (Technical Publications) S2000M (Material Management) S3000L (Logistics Support Analysis) S4000P (Preventive Maintenance) S5000F (In-Service Data Feedback) DefStan 00-600 Current MoD ILS standards Oversee Logistics Support Analysis (LSA), maintenance task analysis, spares modelling and provisioning, support equipment development and design, training and technical documentation Act as the primary ILS point of contact for customers and key stakeholders Oversee delivery of the support equipment within the UK and internationally Support bid and proposal activities, including ILS costing and risk assessment Manage and mentor ILS practitioners within the programme or functional team Ensure ILS risks, assumptions and dependencies are identified and managed effectively What we're looking for from you: Proven experience in an ILS, Supportability or Through-Life Support role within the defence or aerospace sector A broad-based engineering background, preferably degree level qualified or equivalent in a technical discipline, ideally with substantial knowledge and experience of Weapon System development or support. Strong working knowledge of ASD S-Series ILS standards and their practical application Experience working with UK MOD customers and defence primes (desirable) Ability to influence multidisciplinary teams and communicate effectively with both technical and non-technical stakeholders across an international environment Experience supporting bids and proposals Prioritisation and ability to deal with multiple, sometimes conflicting, issues on a regular basis Ability to lead a team, carry out strategic planning of work, and ensuring commitments are always met Effective communication skills, both written and verbal, with the ability to influence and negotiate with internal and external stakeholders across the enterpriseOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

An exciting opportunity has arisen for a multi-skilled Maintenance Operator to join our rapidly growing Calibration & Maintenance team in Stevenage. Salary: Circa £42,500 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking a Multi Skilled Maintenance Operator to join our Calibration & Maintenance Team, to service Equipment. This will involve working on Process and Plant equipment, Nitrogen Systems, Environmental Chambers, high- and low-pressure systems and ESD Protective areas and equipment. The work is extremely varied, interesting and challenging. Working in a multi discipline team to support the Operations team. Ensure that both factory and proprietary test and measuring equipment is maintained in line with current procedures. Carry out repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive maintenance records for traceability purposes. The work is challenging, rewarding and extremely varied.What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ - not required if you have achieved a L3 apprenticeship standard Experience in the maintenance and repair of plant and process equipment. Be competent in following manufacturer's instructions on preventative and routine maintenance requirements. Proactive attitude to daily tasking and be able to deal with multiple issues, tasks and priorities concurrently. Demonstrated knowledge of defect investigations and fault diagnosis. Good attitude to quality and safety. Familiarity with vacuum systems, temperature cycling systems and dew-point testing would be an advantage. A good understanding of SAP would be desirable. Desirable: 18th Edition IET Wiring Regulations, IET Code of Practice for In-Service inspection & Testing of Electrical Equipment. Experience of operating low- and high-pressure air processing and test facilities (including bottled gas systems) beneficial. Experience of working on Environmental Chambers an advantage. Experience in an electronics manufacturing environment an advantage.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Henlow MBDA Facilities Management is searching for a dynamic safety professional to be part of a growing team working to support and deliver a diverse range of construction and facilities projects. Salary:Circa £52,000dependent on experience + bonus + benefits Dynamic working: 3-4days per week on-site due to workload classification (predominantly out of our Stevenage site but regular travel to Bristol and Bolton required). Security Clearance: British Citizen. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. The Opportunity: You will be part of a dynamic team working across the UK estate to help deliver projects of varying sizes to ensure we provide first class working environment for the growing business. Working alongside a team of Project Managers, offering support and guidance and building relationships with both internal and external stakeholders. This role is predominantly based at the Stevenage site but with regular travel to all other UK sites. The role is being offered as a fixed term contract for 2 years. Proactive person with a strong focus on implementation of the CDM 2015 Regulations. Assist the company self-deliver the Principal Designer Role for small works. To be able to hit the ground running against a large portfolio of projects to be delivered across the UK estate. To Support the Contractor Compliance and CDM Manager to deliver competent advice to the FM Team and wider business to ensure compliance. Collate and report back on statistical information around contractor working. Assist with and/or carry out accident/incident investigations Carry out inspections on CDM Sites Travel across the UK Estate to support the wider FM team Assist and take part in both internal and external audits Work closely with Maintenance Service Provider to ensure compliance against procedures and Regulations Be able to deliver against process Able to develop procedures to improvement working practices Growing safety team within the FM Department What we are looking for from you: NEBOSH Diploma or NVQ Diploma (Level 6 preferred) Membership to IOSH ensuring that CPD is in place Understanding of the role of Principal Designer (IMaPS/CMaPS would be beneficial) Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-ST1

Fantastic opportunity to take ownership of manufacturing engineering processes and equipment to make improvements to production whilst developing new skills and techniques Salary: Circa £43,500 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: An opportunity has arisen on the development / production manufacturing lines, for a support engineer who would be responsible for translating design requirements into user instructions including the development of the project manufacturing architecture. You will coordinate the day to day support to the operations staff within the manufacturing facility. The opportunity also allows you to grow your knowledge within manufacturing as part of our development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future principles are some of the work packages that provide stretched objectives for such growth. Working with the Principal Engineer, you will be working on multiple projects, responsible for manufacturing problem identification and resolution: Support existing manufacturing lines and new product introduction Support the industrial validation process through the use of FMEA's, process proving activities etc. Management of configuration control by the embodiment of design modifications into the manufacturing documentation and industrial validation Support the non-conformance process Ensure products are produced with consideration to safety, efficiency and economic factors Assume the responsibilities for safe operating implementation for changed processes, including liaising with COSHH assessors, SHE and human factors Liaise with the design authority during the product prototype/development phase, to ensure optimised Design for Manufacture (DfM) Compilation and update of Manufacturing Instructions maintaining production BOMs Tooling development and controlWhat we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3 and Formal further education certificate to HNC or equivalent in a relevant subjectOR Degree in relevant Engineering subject Must demonstrate a proactive approach to problem solving and commitment to work to meet our delivery milestones. Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions. Must be able to work within and contribute to a team environment. Awareness of digital communication platforms to work and communicate effectively within the workplaceOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Salary: Circa £ 53,000 - £58,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: An opportunity has arisen for a Functional Integration Lead within the Integration and Missile Validation function. Reporting directly to the Chief Systems Proving Engineer (CSPE), you will be responsible for owning and leading the day-to-day delivery of functional integration and system verification activities through this next phase, including all Compat and Software Integration activities. In the immediate term, the role will focus upon sub system integration, introducing updates to the system following on from the initial demonstration programme, as well as introducing new sub-systems and updates, for example the telemetry solution, into the OWEs ahead of flight trials. As the programme develops, the role will evolve to become focused on the strategy of the integration of the spiral development options and investigating the introduction of HWIL to the functional integration activities. You will be a key senior member of the programme, leading the integration and functional proving activities as well as having the opportunity to support all ISV activities across the programme including ground and flight trials. You will interface with different project customers and stakeholders and will be required to have a hands-on and practical approach in the planning and conduct of proving activities. You will therefore need a deep knowledge of system and subsystem functionality and behaviours, alongside a proactive, dynamic and diligent work ethic. Key Responsibilities of the role are: Plan and deliver integration and verification/proving activities to meet programme milestones and support certification/clearance for trials and operations. Translate system/subsystem requirements into comprehensive integration/proving strategies Lead integration campaigns ensuring adherence to procedures and safety requirements Provide programme governance for integration and verification - approve test plans, major risk mitigations, and final readiness for trials/certification Own resource planning, competence development and recruitment for the Functional Integration team, aligning capability to programme demand Liaise with suppliers and test facilities, present integration progress, test results and issues confidently and clearly to customers and programme leaders.What we're looking for from you: Due to the stage of the programme, we are looking for an individual who thrives in a fast-paced environment, is agile and adaptable, and is ready to take on this challenge. The role would suit someone who is: A competent engineer who can deliver an appropriate balance of technical delivery and strategic programme management. Decisive, adaptable and calm under pressure Comfortable with uncertainty with a willingness to take calculated risks Able to make decisions, sometimes without complete information A proactive problem solver who can anticipate challenges, take initiatives to address these, and can adapt solutions as new information appears Passionate and enjoys complex challenges An innovative, creative and practical thinker who can shape how proving is done in the future An effective communicator, able to communicate decisions, priorities and expectations efficiently and clearly.We are also looking for the following experience and skills: Experience in test/integration activities is preferable Good understanding of hardware/software integration and test activities Understanding of the PX4 software architecture. Familiarity using general commercial Lab test equipment. Familiarity using data analysis tools/methods. An appreciation of electronics technologies and the sorts of products that MBDA design and produces would be an advantage.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

As one of the Senior Security Officers you will be a member of the Security Services team within MBDA UK, contributing to developing and promoting a strong, positive security culture throughout the business. Salary: Circa £32,000 depending on experience Dynamic (hybrid) working: This is a full-time office-based role due to the nature of the work load. Security Clearance: British Citizen. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more The opportunity: There is an opportunity to be part of a dynamic, diverse and forward-thinking team within the Security Services sector of the business which is responsible for the effective provision of classified document control. Operating within the HMG Governance and procedural guidelines for classified material, the role requires a strong focus on providing a secure, effective and efficient service that includes ensuring compliance to defined standards and processes, which also reaches into other strands of security. Your Essential Responsibilities will involve these core elements: Provide advice and support to the business on current company and Government guidelines regarding all aspects of classified documentation security, control and management. Process internal and external movements of classified material within the UK and Overseas in accordance with HMG regulations. Support the business meet key deadlines such as bid deliveries and payment milestones. This requires the role holder to maintain flexibility and on occasions may require working additional hours. Maintain accurate records of documentation using the Security Information Management System. Conducting essential document mustering activities including spot-checks and investigations. Maintain accurate statistics. Provide support to the Programme Support Office Manager and other security activities as required. Travel to other sites will be required, from time to time. What we're looking for from you: Experience, skills and/or qualifications for working within a UK Defence/Government setting is preferred; training will be provided. Knowledge/understanding of MoD and company rules for processing and handling of classified documentation. Excellent attention to detail, able to work well under pressure, strong competence in MS Office and experience in using databases. You are able to meet deadlines without compromising on quality and always following process. You are passionate about high quality customer service and are able to communicate clearly, concisely and effectively. You are a team player who's resilient and adaptable to change. Able to use your initiative and willing to step up and take responsibility in the absence of senior team members. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RS1

A military security service in the UK is seeking professional soldiers to provide armed security at various military bases. Responsibilities include managing security incidents, patrolling perimeters, and controlling site access.

A military security service in the UK is hiring professional soldiers to ensure armed security at military bases.

A military security service is looking for individuals with a minimum of 3 years military experience to provide armed security at various MOD locations. Candidates must meet age and fitness requirements, possess a valid UK driving licence, and be ready to face various security challenges. The role i