Aviation jobs in BoltonCreate job alerts

On behalf of our client, we are looking for a Test Equipment Design Support Engineer to join them on an initial 6-month basis. As Test Equipment Design Support Engineer, you will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support Role: Test Equipment Design Support Engineer Pay: £65 per hour via Umbrella Location: Bolton Contract: 6 months (possible extension) IR35 Status: Inside Security Clearance: BPSS however requires Security Clearance Skillset/experience required: Degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Proven experience in the design of one or more of the following disciplines: - Digital and Analogue electronics Power Electronics RF & Antenna Interconnects Safety Electronics Test Systems Schematic design PCB Design Adherence to BS EN Standards Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. You'll be prepared to work autonomously if needed, lead the delivery of your work assig...

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Role: Production Test Engineer - Live Build Location: Stevenage - fully onsite Hours: 37 per week Hourly Rate: £32-£36 per hour via Umbrella, inside IR35 Clearance: SC required before starting, UK Eyes Only due to project What you'll be doing: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures. Supporting meetings with Quality a...

Our client has an opportunity for a Technical Administrator to join them on a contract basis in Bolton for 12 months. The main focus of the role will be to manage all parts used in the calibration & maintenance of bespoke test systems on site. This will need to be managed in our SAP system. Role: Technical Administrator Location: Bolton, fully onsite Hours: 37 per week Clearance: BPSS required before starting, full SC to follow Hourly Rate: £22.17-£24.19 per hour via Umbrella, inside IR35 What you'll be doing: Providing technical administration support to the ESS & Mechanical Team to ensure programmes are met to agreed time, cost and quality requirements. Managing Spares. From COTS (commercial off the shelf) down to components e.g. IC's, connector savers & service kits. Creation of calibration and service kits and their redeployment back into our stock holding. Creation of material master's with our SAP management system. Working with engineers to ascertain min / max quantity levels. Organisation of current stock and regular stock taking. Ordering of new stock. Using Jira to notify people of where items are up to. Assisting the Control Team Lead in the management of critical spares. Liaising with relevant Engineering function to determine their requirements Deploying critical spares packages and managing calibration requirements to minimise downtime to production. Providing SAP training and producing...

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. Role: Mechanical Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £32-£35 per hour via Umbrella, inside IR35 Clearance: SC required before starting What you'll be doing: The main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Requirements: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge o...

Great opportunity to work as an HGV Class 1 Driver for our client's site - Deliver and collecting to RDC's non refrigerated baked goods. Staffline is recruiting HGV Class 1 Drivers in Bolton, BL6 5JE . The rate of pay is £16.06 - £21.41 per hour. This role offers Ad Hoc shift patterns with various start times. Your Time at Work As a HGV Class 1 Driver your time at work you will be delivering and collecting to RDC's non refrigerated baked goods. Our Perfect Worker Our perfect worker will have 6 months of class 1 driving experience, CPC and a Tacho Card. Experience in a similar role is required. Key Information and Benefits - Earn £16.06 - £21.41 per hour - Various Start Times - Free car parking on site Job Ref: D1WWDB About Staffline Staffline is the UK's largest recruitment solutions partner, enabling over 35,(Apply online only) people into good work every week. We operate at more than 420 customer sites across England, Scotland and Wales. As one of the most established recruitment agencies in Nottingham with operations across the UK, we specialise in connecting businesses with temporary and permanent jobs across warehouse & logistics, food and drink, aviation, driving, technical & engineering, manufacturing & automotive and security. Important Information - Staffline and its subsidiaries do not charge any recruitment or job‑se...

An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Fitter Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks) Location: Bolton Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: BPSS Responsibilities: Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. W...

Our client has an opportunity for an Electrical Inspector to join them on a 12 month contract. Role: Electrical Inspector Location: Bolton - fully onsite Clearance: BPSS required to start Hourly Rate: £28.35 per hour via Umbrella, inside IR35 What you'll be doing: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Inspect for physical damage. Intermediate inspection checks for non-Product Certification activities. Monitoring of operators within the Product Certification Scheme. Check, complete and certify all paperwork associated with the manufacturing data pack. Control of non-conforming items. Raise and maintain relevant data records/non-conformance reports. Produce relevant inspection/quality control documentation/history sheets. Care for and use specialised inspection tools. Maintain product certification and approval via regular audits. Ensure compliance with all associated procedures applicable to the manufacturing process. Ensure inspection times are met. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Maintain to the highest level, workmanship standa...

My client is looking for several Electrical Test Operators to join them on an initial 12-month basis. As the Electrical Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Test Operator Pay: £28.35 per hour via Umbrella (rising to £29.70) Location: Bolton Contract: 12 Months (possible extension) Hours: Monday - Friday, 37 hours per week Security Clearance: Security Clearance required however can start on BPSS Responsibilities: Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant, test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members.Skillse...

On behalf of our client, we are looking for a Test Equipment Obsolescence Manager to join them on an initial 6 -month basis. Role: Test Equipment Obsolescence Manager Pay: Up to £60 per hour via Umbrella Location: Bolton Contract: 6 months (possible extension) IR35 Status: Inside Security Clearance: SC Clearence needed, UK eyes only Responsibilities Managing Proactive and Reporting Services Implementing Strategy for Obsolescence Management Technical Assessment working with Engineering teams to manage changes Managing Resources and Work load Planning Skillset/experience required: Engineering Degree or relevant experience Knowledge and experience of managing Obsolescence Knowledge and experience of Electronic Equipment You'll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. Manage discreet work packages preparing bids, controlling costs and delivering solutions. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. If you are interested in applying for this position and you meet the requirements, please send your updated CV t...

Our client has an opportunity for a Missile Mechanical Architect to join them on a contract basis for 6 months with likely extension. This exciting role is to gather and manage the missile mechanical architecture requirements to achieve missile performance, on time and on cost and overall layout vs compliance. This involves providing justification of the design and co-ordinate the verification evidence of missile performance to support certification. Role: Missile Mechanical Architect Location: Stevenage or Bolton, fully onsite. (must be happy to travel between locations) Hours: 37 per week Clearance: Full SC required before starting Hourly Rate: £60 per hour via Umbrella, inside IR35 What you'll be doing: Establishing the Missile Airframe Task Requirements Specification (TRS) to ensure a structured & coherent mechanical response to the overall Missile TRS Management of the mechanical interface with the launcher Management of Mechanical & Thermal Interfaces across the Missile Defining the optimum mechanical architecture for all variants of the missile, ensuring the mechanical architecture and interfaces meet requirements Implementation of GMA (Generic Missile Architecture) Policies to ensure Modularity & Reuse objectives are achieved Development of the overall proving logic for the validation of the Airframe Ensuring mechanical compliance to the Airframe TRS for missile certificate of design Interface with and manag...

On behalf of our client, we are seeking to recruit a Systems Functional Design Engineer on an initial 12 - month contract Role: Systems Functional Design Engineer Pay: Up to £80 per hour via umbrella Location: Stevenage, Bristol or Bolton Contract: Monday- Friday, 37 Hours per week, 12 Months Contr

On behalf of our client, we are seeking to recruit several Mechanical Fitter to join on an initial 12-month contract.As a Mechanical Fitter you will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, def

Our client has an opportunity for a Manufacturing Bid Lead to join them on a contract basis for 12 months with possible extension.You will be responsible for the Generation of Manufacturing Bids for Industrial Transfer packages of work, ensuring they are competitive, compliant and are in line with a

As the Manufacturing Assembly & Integration Engineer your focus will be to ensure that our products are built efficiently and to budget. Manufacturing Assembly & Integration Engineer. OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering disci

You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. Minimum qualification: HNC in Mechanical Engineering.

Line Up Aviation is seeking Electrical Test Operators in Bolton on an initial 12-month contract. Candidates should have NVQ Level 3 or equivalent education, alongside substantial electrical test experience.

A prominent engineering company in Bolton is seeking a Contract Production Test Engineer. This role involves providing vital test engineering support during the production of complex electrical and electronic systems.

Line Up Aviation is seeking a Manufacturing Assembly & Integration Engineer in Bolton, England.

Our client has an opportunity for a Technical Administrator to join them on a contract basis in Bolton for 12 months.The main focus of the role will be to manage all parts used in the calibration & maintenance of bespoke test systems on site.This will need to be managed in our SAP system.Location: B

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Experience and knowledge in dimensional calibration required.

Line Up Aviation is looking for an Electrical Inspector in Bolton for a 12-month contract. Responsibilities include inspecting electrical assemblies for compliance, maintaining product certification, and generating quality control documentation.

Line Up Aviation is seeking a Test Equipment Design Support Engineer in Bolton.

Experience in Aviation industry. Magma Aviation is proud to be an equal opportunity employer committed to workplace diversity. Magma Aviation commercially markets dedicated wide-body cargo aircraft capacity, contracted on an exclusive basis from third-party airlines.

Experience of working pre and/or post-contract in the rail, aviation or utility sectors. Commercial Managers - Aviation, Rail, Utilities.

This role offers an exciting opportunity to shape the future of aviation infrastructure, working collaboratively within a supportive environment.

This is an opportunity for a strategic leader passionate about aviation and business growth to shape Arup’s future success in the sector. AVIATIONJobsUKIMEA J-18808-Ljbffr. Watch this short clip to discover how Arup are shaping a better world and how you could be a part of it! The Opportunities Ar

The role involves managing environmental assessments for significant aviation projects while fostering client relationships and innovative solutions.

You will be instrumental in improving the environmental performance for a range of aviation projects. The role would suit an enthusiastic individual looking to influence, manage and deliver environmental elements of aviation projects. Demonstratable experience of undertaking EIA for aviation schemes

Metrea delivers effects-as-a-service to national security partners across five domains and more than a dozen mission areas, including ISR, electronic warfare, secure communications, aerial refuelling, special mission aviation, firefighting, and advanced simulation. Special Aviation Missions (Europe)

Perfect for those ready to make a real impact in private aviation. Don't miss this chance to elevate your career in aviation and apply today.

We are seeking an experienced aviation professional to lead strategy and drive transformation through the coordination of teams implementing innovative projects in maintenance programme development. Extensive experience in aircraft maintenance programme development within an airline, MRO, OEM, or av

STS Aviation Group is seeking B1 Licensed Engineers for contract roles in Manchester, United Kingdom.

You will leverage data and analytics to deliver strategic projects within the aviation sector, supporting leading airlines and financial institutions.

Select how often (in days) to receive an alert:.Job Title: Electrical Fitter (Avionics/Heater).Business Unit: Maintenance & Repair Europe.Help the workshop team test, repair, and overhaul aircraft components, mainly electrical items, ensuring all work is safe and meets company standards.Carry out wo

Bournemouth Airport is seeking Aviation Security Officers to ensure safety and deliver excellent customer service.

On behalf of our client, a leading organisation in the aviation industry, we are currently recruiting for an Aircraft Trimmer to support their maintenance activities. JMC Aviation is committed to equal opportunity and diversity in the workplace. We operate in full compliance with global aviation rec

This role sits at the heart of Continuing Airworthiness Engineering regulation, underpinning both Preventive and Corrective Maintenance standards that directly contribute to airworthiness and aviation safety across the Defence Aviation Environment. This post carries line management responsibilities

On behalf of our client, a leading organisation in the aviation industry, we are currently recruiting for a Planning Engineer to support their maintenance activities. Technical experience in aviation and able to demonstrate knowledge of airworthiness regulation. JMC Aviation is committed to equal op

RigNet is seeking an experienced Product Manager to join their Aviation team in Greater London. The ideal candidate will lead the development of aviation safety critical products, collaborating with engineering and business teams to ensure successful product launches. The role offers an opportunity

The ideal candidate will have a strong background in health and safety legislation, experience in construction and aviation industries, and the ability to collaboratively influence safety practices.

In addition to ACMI services, ASG offers a wide range of aviation solutions, including MRO (Maintenance, Repair, and Overhaul), pilot and crew training, ground handling, and more. Prior experience in the aviation industry or similar role is beneficial.

A leading aerospace technical communication firm is seeking a Technical Author to support the creation of manuals and technical documentation.The ideal candidate should have at least 5 years of experience in the aerospace industry, be skilled in various technical writing tools, and possess an engine

Ontic is seeking a Pneumatic Test Technician in Staverton, Gloucester, to test and validate pneumatic and mechanical assemblies in compliance with strict aviation standards.