Trabajos aviation en BedfordCrear alertas

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across nine sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role will be part of our BlueBear Business in Bedfordshire. This Senior Electronics Engineer position will work in the electronics design and prototyping department, performing key electronics designs in support of larger projects and guiding of electronic engineers within the team. This role is suited to a person with extensive experience in detailed electronic design, strong knowledge of safety- and mission-critical development environments, including DO-254 compliance and controlled design documentation processes. Key Responsibilities: Technical Leadership & Design Execution: * Own and drive the electronic hardware designs for specific designs, implementing full design lifecycle from requirements capture through to production release. * Perform detailed design activities for digital, mixed-signal, Application Processor and FPGA-based, and high-reliability systems. * Provide expert review and approval of schematics, PCB layouts, component selection, and detailed design documentation. Design Standardisation & Quality Governance: * Act as one of the organisational Subject Matter Expert for DO-254 processes, standards, and industry best practice. * Maintain design assurance processes and verification traceability across safety-critical electronics developments. * Oversee configuration control, Verification and Validation activities Project & Stakeholder Coordination: * Work cross-functionally with Systems Engineering, Software, Mechanical, Test, and Programme Management teams to ensure aligned delivery. * Support bid development, cost estimation, design planning, and reporting to internal and customer stakeholders. * Ensure workloads, priorities, project risks, and dependencies are managed effectively to meet schedule commitments. Qualifications and Skills: Essential: • Strong project and programme management experience., • 5-8 years experience in electronics hardware design across digital and mixed signal systems, • Experience applying and designing to DO-254, • At least 1 year of wiring and PCB rework experience., • Significant expertise in detailed electronics hardware design., • Detailed understanding of the electronics manufacturing processes, • Excellent attention to detail., • Process driven, ability to read legislation and implement processes to ensure adherence., • Excellent time management/prioritisation skills, • Highly organised and able to work multi projects in fast paced environment, • Adaptable personality with professional approach, • Good verbal and written communication skills, • Excellent organisation skills, • Conscientious, with a proactive work ethic Desirable: • Experience of interfacing with subcontractors, • Experience writing VHDL or Verilog, • Experience writing embedded C and Python Subject to UK MoD security clearance vetting to a minimum SC level As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focused on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. We are looking for anIndustrialisation Engineer to join our Industrialisation team to support Capex / sustainability / NPI projects from cradle to grave across our existing and future programs. Working with Key stakeholders across the site, the post holder key objectives are to support and deliver manufacturing systems in compliance with identified requirements including Producibility, Productivity, Manufacturing cost, Regulatory/Customer/EHS requirements and adherence to Zero Defect Manufacturing (ZDM) standards, whilst delivering these projects to the agreed Budget and Schedule following recognised project management methodologies. TheIndustrialisation Engineer will support and deliver projects including the Planning, Development, Commissioning and Industrialisation of Manufacturing Systems & Processes for the Luton manufacturing site. The engineers development will include internal and external training as required. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday, there is flexibility with working hours as arranged with the manager. There is the requirement to undertake occasional travel when required nationally and internationally, to meet suppliers. Job Responsibilities NPI - the industrialisation Engineer is responsible for the supporting and leading of designated projects including bid development, planning, delivery, and commissioning of Manufacturing Systems and Processes for New Product Introduction programmes [LG3->LG7]. Working with Design Engineering and Programme management, they are responsible for delivering a manufacturing system that fulfils all stakeholder requirements (Safety, Logistics, Quality, Producibility & Business case metrics), including development and maturity of Manufacturing processes and documentation. Capex - the industrialisation Engineer is responsible for the delivery of CAPEX projects, from supporting the business case development through equipment specification, procurement, commissioning and implementation to ensure productivity & quality targets are met. This includes Identification of new technologies and their development & exploitation, and benchmarking of processes across the GKN portfolio of products. Sustainability - the Industrialisation Engineer will lead/support continuous Improvement and obsolescence projects throughout the site as identified by the business. Leadership of Projects - the industrialisation Engineer is responsible for technical leadership of designated industrialisation projects including manufacturing system design, equipment identification and specification, implementation and deliver of APQP activities to ensure robust process capability and ongoing performance. This includes Project Management, Planning, Resource identification, budgeting, & Project reporting within functional and Enterprise standards. Quality Responsible for ensuring implemented solutions deliver the required quality against specification requirements and further deliver sustained manufactured Product quality and drive a quality mind-set within the engineering team and ensure compliance to agreed Customer, Regulatory, Business and functional standards including AS9145 (ZDM). Relationships - Maintain positive, team relationships with internal and external customers, key stakeholders within the business. Foster and champion 5 principles within sphere of influence. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant professional qualification such as HNC/HND/ Degree in engineering (e.g. Automotive, Mechanical, Electrical, Chemical) Technical expertise in Manufacturing Engineering Ability to influence people, build trust and establish effective working relationships within a global organisation Working knowledge of LEAN processes and practices Working knowledge of quality system models such as ISO9001 or AS9100 Experience of collaborating with Procurement, Finance, Works Engineering, Manufacturing Engineering and Operations. Desirable: Project / Program Management Professional Qualification Familiarity with AS9145 APQP process or equivalent Demonstrable experience in Industrial Engineering and demonstrated ability to deliver work in a structured project environment, with evidence of delivering significant improvements in terms of cost/quality of a manufacturing system Familiarity with appropriate digital opportunities for manufacturing systems Familiarity with managing CAPEX / equipment projects through to production implementation. Experience of managing New Product / Process introduction (industrialisation) & existing production process improvements Were seeking people who want to make a difference individuals with the talent, drive and passion to shape the future of what they do. AsIndustrialisation Engineeryoull thrive in a collaborative, cross-functional environment, with exceptional organisational and time-management abilities. Youll confidently support multiple projects at once, demonstrating initiative and clear communication across all levels of the business. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? JBRP1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. Were looking for a Senior Engineer - Materials & Processes with a strong non-metallic materials engineering background, to join our materials and test team to support the production and development of next generation composite aero structures, ice protection and transparency products. The role will be based in the Materials, Coatings and Test (MCT) team within the wider Engineering and Technology department and report to the Functional Team Leader. The role as a Senior Engineer - Materials & Processes will support the business and engineering team, with non polymer materials science and processing knowledge and guidance. The role will provide a deep understanding of the interactions between processing parameters and material properties of Acrylics, Polycarbonates and adhesives, being able to guide new technology test plans and current production deviations. There will be occasional travel, national and international, required to support customer visits and other GKN sites. You will also support the work of the business to establish safe working practices and necessary level of documentation. You will be involved with projects from the planning / assembly / instrumentation / commissioning phase though to successfully performing and reporting the test. You will also be responsible for providing specialist support to existing programmes within your field of expertise, helping to resolve manufacturing issues and supporting continuous improvement efforts. You will have a proven track record of leading and delivering technical work, with strong communication skills being confident working with a broad range of internal and external stakeholders, including non-technical audiences. Job Responsibilities Development of manufacturing processes in relation to polymer, composite and adhesive materials Qualification of materials and processes to assure they comply with the requirements Assessment of deviations from the specified materials and processes requirements to assure continued airworthiness Support robust, manufacturing process technologies as applied to materials, Collect inputs, related to a task and take it through an identified process to produce an output / deliverable adhering to quality and schedule requirements. Coordination for material obsolescence and REACh activities: identification of arising issues regarding the REACh legislation, providing support and advice locally and to other GKN sites concerning the impact of REACh. Lead small project material obsolescence replacement activities including material investigation, reporting, customer engagement and implementing in to production Preparing and guiding tests/test plans; critical and systematic interpretation and analysis of test data, applying the outcome of tests for substantiation of specification changes. Troubleshooting and production support on Materials Issues (e.g. Composites, polymers, bonding, surface treatments). Contribute to the development of GKN as a 'great place to work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Composite or Polymer Materials Science or Manufacturing Engineering Degree Experience in Polymer and Composite material science and processing Experience within an industrial engineering discipline, preferably within Aerospace/Automotive/Marine/Energy sectors Experience with quality systems, specifications, standards, etc., with the ability to oversee the broader field Good English language, both verbally and in writing, Desirable: Ability to plan work through formal project management processes, including scheduling and budgeting and lead a team to ensure successful delivery of required outcomes. An awareness of aerospace certification requirements. A higher degree qualification such as a Masters, PhD or EngD within aerospace/automotive/marine/energy sectors Familiarity with REACh environmental legislation The successful candidate should have a broad interest in non-metallic material technologies & testing and characterisation techniques. Youll be able to adapt to changing priorities to meet business priorities handling multiple enquires at once. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders, including operations and other business functions. AsSenior Engineer - Materials and Processes, you will be naturally curious and seek to increase/deepen own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? JBRP1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. Were looking for a Research Specialist - Special Coatings Technology to join our coatings development team based at our Luton Manufacturing facility, to support the development of next generation high performance transparency polymer coatings, icephobic coatings and coating manufacturing processes. As a Research Specialist you will bring your knowledge in polymer coatings development, processing, application and coating testing techniques to deliver high-impact research and development across Technology Readiness Levels (TRL) 17. Youll be responsible for ensuring that all research outputs are technically robust, innovative, and aligned with our broader engineering and sustainability goals. You will also be responsible for providing support to existing programmes within your field of expertise, helping to resolve manufacturing issues and supporting continuous improvement efforts. You will have a track record of delivering high quality technical work, with experience of working within a project environment. You will have good written and oral communication skills, and be confident working with a broad range of internal and external stakeholders, including non-technical colleagues. As this is a research role we are looking for a hands on innovative thinker, your work should push the boundaries of conventional coating technologies, application and evaluation/testing techniques. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Responsible for the technical delivery of allocated project tasks, deliverables, or project work packages, ensuring the research objectives have been satisfied. Support or lead any necessary 'hands on' development test work and development trials that are required to meet project objectives. Contribute to Technology Development Plans, Project definitions and may support creation of Technology Business Cases and external funding proposals as required. Support project stakeholder engagement activities including customer presentations and reviews, and you may lead management of supply chain partners activities in some cases. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant, accredited Chemistry / Materials/ Coatings based degree. Knowledge / Experience of coating development, application technology and materials testing. Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards. Logical and methodical approach to task planning. Good report writing and presentation skills. Desirable: A higher degree qualification such as a Masters, PhD or EngD. An awareness of aerospace certification requirements. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The successful candidate should have a broad interest in Aerospace engineering with an understanding of Polymer materials chemistry & processing, ideally from coatings development perspective, and with technical experience of working within a laboratory environment. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. The successful candidate should be adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Research Engineer, you will be naturally curious and seek to increase/deepen own technical knowledge through study, collaborative working, hypothesis testing and experimentation. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount 50% off local travel card Free airport Dart Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? JBRP1_UKTJ

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our BlueBear Business in Bedfordshire. The Operations Manager will work across the organisation providing governance, compliance, trials and business coordination support. Process improvement and performance tracking coupled with customer feedback capture to continuously improve BlueBear operations and integration with Saab UK. Key Responsibilities: * Drive continuous improvement across the organisation to achieve high standards. * Be the focal point for process standardisation and compliance with the organisations quality management system. * Be the focal point to Saab UK functions for critical compliance areas including export control, health & safety and security. * Dev...

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across nine sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role will be part of our BlueBear Business in Bedfordshire. This Senior Electronics Engineer position will work in the electronics design and prototyping department, performing key electronics designs in support of larger projects and guiding of electronic engineers within the team. This role is suited to a person with extensive experience in detailed electronic design, strong knowledge of safety- and mission-critical development environments, including DO-254 compliance and controlled design documentation processes. Key Responsibilities: Technical Leadership & Design Execution: * Own and drive the electronic hardware designs for specific designs, implementing full design lifecycle from requirements capture through to production release. * Perform detailed design activities for digital, mixed-signal, Application Processor and FPGA-based, and high-reliability systems. * Provide expert review and approval of schematics, PCB layouts, component selection, and detailed design documentation. Design Standardisation & Quality Governance: * Act as one of the organisational Subject Matter Expert for DO-254 processes, standards, and industry best practice. * Maintain design assurance processes and verification traceability across safety-critical electronics developments. * Oversee configuration control, Verification and Validation activities Project & Stakeholder Coordination: * Work cross-functionally with Systems Engineering, Software, Mechanical, Test, and Programme Management teams to ensure aligned delivery. * Support bid development, cost estimation, design planning, and reporting to internal and customer stakeholders. * Ensure workloads, priorities, project risks, and dependencies are managed effectively to meet schedule commitments. Qualifications and Skills: Essential: • Strong project and programme management experience., • 5-8 years experience in electronics hardware design across digital and mixed signal systems, • Experience applying and designing to DO-254, • At least 1 year of wiring and PCB rework experience., • Significant expertise in detailed electronics hardware design., • Detailed understanding of the electronics manufacturing processes, • Excellent attention to detail., • Process driven, ability to read legislation and implement processes to ensure adherence., • Excellent time management/prioritisation skills, • Highly organised and able to work multi projects in fast paced environment, • Adaptable personality with professional approach, • Good verbal and written communication skills, • Excellent organisation skills, • Conscientious, with a proactive work ethic Desirable: • Experience of interfacing with subcontractors, • Experience writing VHDL or Verilog, • Experience writing embedded C and Python Subject to UK MoD security clearance vetting to a minimum SC level As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our BlueBear Business in Bedfordshire. The Operations Manager will work across the organisation providing governance, compliance, trials and business coordination support. Process improvement and performance tracking coupled with customer feedback capture to continuously improve BlueBear operations and integration with Saab UK. Key Responsibilities: * Drive continuous improvement across the organisation to achieve high standards. * Be the focal point for process standardisation and compliance with the organisations quality management system. * Be the focal point to Saab UK functions for critical compliance areas including export control, health & safety and security. * Develop and track KPIs to support the delivery of the organisation's Strategic Business Plan. * Implement processes for capturing customer feedback, communicate success and track change where required. * Communicate Operational Excellence throughout the organisation. * Co-ordinate all internal and external audit activity. * Act as Risk and Opportunity Co-ordinator and lead all business continuity management activities. * Co-ordinate compliance activity such as export control ensuring sufficient resources and processes are in place. * Co-ordinate the implementation of new compliance standards and business support tools. * Capture and track internal feedback on processes to drive continuous improvements. * Delivery internal training on continuous improvement / operational excellence where required. * Champion information management within BlueBear. * Support internal project activity where required and manage the activities of the Facility Coordinator. Qualifications and Skills: * Proven leadership skills, ability to drive change in the organisation. * Excellent communication and interpersonal skills. * Highly motivated self starter who requires minimal supervision. * Demonstratable experience of implementing effective change in an organisation. * Proven experience managing risks and implementing risk management policies inc. business continuity plans. * Experience with implementation Quality Management Systems and compliance with ISO 9001. * Experience with ISO 27001 desirable. * Awareness of critical compliance areas including UK export control, health & safety and environmental management desirable. * Experience with defence industry and UK MOD desirable. As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role will be a part of our Saab Seaeye business in Fareham. This can be a 12 month FTC. In this role you will take responsibility for the full-lifecycle design and development of bespoke power conversion and transmission solutions in line with the company's business needs through innovation, creativity and professionalism. As Lead Engineer you will act as Technical Authority for concurrent power projects: from in-house designs to outsourced specification and management. Key Responsibilities: The role seeks an engineer with excellent knowledge of power architectures, transmission, conversion and distribution, whilst having an appreciation for the real-world subtleties involved in creating robust and reliable power systems. You may be working on anything from large-scale power conversion products, efficient cabled transmission designs all the way through to motor drives and low voltage converters. Our voltages range from 24V to 5000V with powers from 500W to 250kW. You will be responsible for the successful design, implementation and delivery into our products. This may include technically leading small multi-disciplinary teams and therefore the candidate must show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills. A product-focussed mindset is essential: taking a view across the different engineering disciplines to deliver the most appropriate solution. Our products provide unique challenges in designing non-conventional solutions which can meet size, weight and efficiency demands. Qualifications and Skills: Essential: • Significant Experience in Power Electronics, • Full-lifecycle experience: from concept to tested solution, • Self-starter: taking the lead and having a proactive mindset, • Excellent theoretical knowledge backed up by proven hands-on experience, • Proven knowledge of power transmission: AC and DC, applied to multi-km cabled solutions, • Proven Knowledge of DC converter topologies: Buck/Boost/Flyback/LLC/Full-Bridge, • Proven Knowledge of AC converter techniques: single phase/multiphase, power factor correction, • Experience of power converter product design AC-DC, DC-DC and DC-AC inverters, • Experience working with power switching devices: MOSFET, IGBT, SiCFET, GaNFET and associated drive circuitry, • Experience working with voltages up to 5kV and multi-kW powers, • Experience in designing or specifying custom transformer and magnetic components, • Experience using modelling and simulation packages, • Experience in both digital and analogue design concepts, • Experience of filter design and implementation, • Experience designing/specifying control systems for power conversion, • Knowledge of thermal management techniques, • Knowledge of design-for-compliance, • Experience developing requirements specifications and test procedures, • High Voltage Experience up to 5kV, • Thermal modelling experience, • Motor design principles and control techniques

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role We are seeking a detail-oriented Finance Administrator with a focus on Expenses processes to join our finance team. The role will focus on reviewing and processing expenses, ensuring that they are in line with company guidance and local regulations. position suits someone with strong numerical skills, accuracy, and a proactive approach to problem-solving. Key Responsibilities • Responsibility, • Point of contact for Saab UK employees., • Run a smooth and efficient expenses process across the business, providing guidance and support to staff and office managers., • Routines, • Review expenses for accuracy, correct coding, and approval before posting., • Check accounting allocations are correct and accounts are reconciled including payments., • Ensure all expenses comply with company policies and VAT requirements., • Prepare and present analysis and reporting to the Head of Finance, • Prepare Yearend tax reporting requirements, • Establish month end Controls in the UK and process improvements., • Support the finance team with expense reporting and budgeting., • General Administration & Compliance:, • Assist with month-end close activities (e.g., reconciliations, accruals)., • Maintain organized and accurate financial records., • Provide administrative support to the wider finance function., • Provide support to Auditors, • 1-2 years' experience in a similar role., • Good understanding of expenses and local VAT and tax regulations relating to expenses., • Strong attention to detail and ability to meet deadlines.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our Saab Seaeye business unit. This Project Manager role has the responsibility for delivering assigned new product projects to the requirements of cost, time and quality and for ensuring that Saab Seaeye is recognised as a Project and Program Management Centre of Excellence within Saab UK and the wider Saab business. Key Responsibilities: * Responsible for the delivery of assigned Saab Seaeye New Product Projects meeting cost, schedule and quality requirements * Deliver to customer contractual requirements * Deliver benefits in line with business case * Build strong working relationships with internal and external stakeholders * Report project status to internal and external stakeholders including customers and project boards * Ensure adherence to the applicable Saab Project delivery processes * Ensure adherence to appropriate risk management and financial control tools during execution * Lead, manage and guide a cross functional project teams * Take a leading role in the Saab UK and Saab Group Project Management community * Support the development, implementation and continuous improvement of best practice program and project management methodologies * Be a recognised leader by being accountable, holding others accountable and driving delivery * Enable a collaborative culture by encouraging communication and team work. * Support the Saab Seaeye organisation generally in developing new business opportunities * Proactively ensure alignment with other Project Managers across the Saab organisation as appropriate. Skills and Experience: * A bachelor's degree in business, project management, or a relevant industry. * A recognised certification such as PMP or PRINCE 2. * Proven accountability for large-scale budgets and financial control. * Exceptional stakeholder management, negotiation, and communication skills. * Proficiency in Microsoft Project, Jira, or similar PPM tools. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Sensor Systems Business Unit. Saab is expanding in the UK and we are now seeking talented and highly motivated Systems Engineer to support our radar and sensors growth activities at either our Fareham campus. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As a Systems Engineer you will regularly work with current products, developing enhancements and investigating new areas for product growth. Key Responsibilities: As a System Engineer you will be responsible for various activities across the product lifecycle. Responsibilities include: * Support to bid activities * Requirements management activities * Radar performance analysis * Radar algorithm development * System and sub-system design * Support to customer demonstrations * Travel within UK and abroad (including to Gothenburg office) Required Skills: * As a person you are positive, social, results oriented and a team player with a background in systems engineering * Experience of radar, communications or EW systems in considered essential (5 years minimum) * Experience of working with MATLAB, ideally working with recorded radar data * Experience of working in a recognised industry standard requirements management tool * Familiar with principles of 15288:2023 * Familiar with product road mapping and product lifecycle techniques * Enjoy working and developing in a team * Like cooperating with others but are capable of working individually as well * Good technical communication skills * Have a Bachelors degree or equivalent * During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. We're hiring a Quality Assurance Auditor to be based at our Luton manufacturing site. Reporting to the site Quality Manager, join the quality function to audit GKN Aerospace internal and external requirements such as Business/Quality Management Systems (BMS/QMS) & processes, against Regulatory Requirements, Industry Standards and Customer Requirements. Our Luton site operates core hours of 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays, giving you an early finish to start your weekend. Job Responsibilities Assist the Quality Manager in the delivery of audit activities that support the respective audit plans and schedules. As appropriate, lead in audit engagement planning, scoping, and follow-up activities. When charged with undertaking an audit, delivering the objectives of the audit, ensuring adequate preparation for the conduct of their respective audit criteria. Providing appropriate constructive feedback and recognition for the audit participants and site leadership team. Within their specific audit criteria for gathering audit evidence, recommendations and preparing the audit and distributing the audit report and conducting the audit follow up. Identify and share across the business, best practices and support continuous improvement of the BMS/QMS and its processes.Youll assess audit evidence and non-conformities, highlight improvement opportunities, and share clear recommendations and risk insights with the Quality Manager. Youll also play a key role in supporting root-cause analysis and corrective action activities. Propagate Quality Culture across GKN Aerospace Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Demonstrable experience of working within a regulated industry such as Aerospace or Automotive Possess the necessary personal attributes/behaviours to act in accordance with the principles of auditing. Knowledge in the use of risk based methods and techniques for audit planning and management; Demonstrable experience in Practical Problem Solving (PPS) and Route Cause and Corrective Actions (RCCA) Techniques in order to provide effective audit follow up / closure assessments. An effective communicator with experience in MS applications/tools. Desirable: Certification, or obtained training, as an Internal or External Auditor through a certified Training Partner Experience of aerospace management systems, processes and procedures Demonstrable knowledge of AS9100 / ISO 9001. Knowledge of Aviation Regulations (EASA, CAA etc.) & contracted customer quality requirements. Experience in undertaking Internal Audits, in a regulated industry, against the audit process requirements. We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. TheQuality Assurance Auditorwill demonstrate strong communication skills, using active listening, thoughtful inquiry, and clear articulation when engaging with diverse stakeholders. You'll build effective professional relationships across the business, supporting collaboration and shared understanding. With excellent analytical and critical-thinking abilities, you'll apply close attention to detail when working within complex systems, ensuring accuracy in identifying non-conformities and improvement opportunities. Confidently carry out critical evaluations of processes and designs, assessing effectiveness and highlighting areas for enhancement. Strong problem-solving skills and solid subject knowledge of requirements will support sound judgement and practical recommendations. The role requires effective note-taking, ensuring audit evidence and observations are captured accurately and transparently. TheQualityAssurance Auditorwill act with the highest level of integrity, maintaining impartiality, confidentiality, and professionalism at all times. With a mindset of adaptability and curiosity, remain open to new information, evolving requirements, and continuous improvementboth in own work and across the wider organisation. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? JBRP1_UKTJ

High Voltage Senior Engineer Luton Location: Luton (predominantly office-based with occasional site visits) Hours: 08:0016:30 Salary: £60,000 £70,000 + £5,000 car allowance Sectors: Power / Energy / Commercial / Aviation / Electrical Infrastructure Hybrid: Potential for elements of hybrid working Benefits 25 days of annual leave plus bank holidays Professional training and continued development Supportive leadership team with clear technical progression Exposure to major high-voltage and electrical infrastructure schemes Collaborative, engineering-focused team environment Flexible employer About Our Client Our client is a specialist electrical and civil engineering contractor delivering complex infrastructure projects across the rail, power, and commercial sectors. They manage enhancement and renewal projects from inception to delivery, providing a complete engineering package from concept to completion. Their electrical division delivers technically challenging schemes, including: • HV and LV electrical infrastructure upgrades, • HV switchgear, transformers, and substation works, • Power distribution and electrical installations (HV/LV), • Cable routing, containment, ducting and protection systems, • Electrical works supporting rail and commercial environments To apply, please contact Sally Whittingham or submit your application online. SEO Keywords High Voltage Engineer, High Voltage Senior Engineer, Senior HV Engineer, HV Electrical Engineer, Senior Electrical Engineer HV, HV Project Engineer, Electrical Project Engineer, Power Systems Engineer, Substation Engineer, HV Design Engineer, Electrical Infrastructure Engineer, HV/LV Engineer, Switchgear Engineer, Transformer Engineer, Protection & Control Engineer, DNO Engineer, IDNO Engineer, National Grid Engineer, Power Distribution Engineer, Electrical Engineering Jobs, HV Jobs Luton, Power Engineering Jobs, Energy Infrastructure Jobs, Electrical Construction Engineer, Rail Electrical Engineer, Aviation Electrical Engineer, Electrical Installation Engineer, High Voltage Projects, Electrical Contractor Jobs, Engineering Jobs Luton. JBRP1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a member of the Manufacturing Engineering Team, the Senior Manufacturing Engineer will initially report to the Manufacturing Engineering Manager, with daily leadership and support provided by the Team Leader. Working across Civil and Defence business lines and based at our Luton site, occasional travel to visit equipment suppliers will be required. The Senior Manufacturing Engineer will work on several value streams within current programmes developing new and existing manufacturing processes whilst supporting the day-to-day operations team at Luton. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Local project technical lead for the implementation of production planning, from original concept through to production. Design high capability manufacturing processes using GKNs Zero Defect Manufacturing (ZDM) tool suite, including the APQP Core Tools. Develop, document and optimise new and existing manufacturing processes such as creation/amendment SOP (Standard Operating Procedure) and Process Specifications Create and update engineering documentation to maintain configuration control and help manage point of introduction activities, first article inspection and customer approval Lead structured improvement activities to reduce process driven scrap and rework Provide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answered Make presentations at senior level internally and externally demonstrating ability to clearly communicate to the audience Identify, anticipate and offer solutions to technical problems Establish & improve production process controls Comply with company Environmental, Health, Safety and Energy procedures. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Minimum HND qualification (or equivalent) in Mechanical, Electrical, Industrial or Manufacturing Engineering/Aerospace Demonstrable Manufacturing Engineering experience gained from ideally the Aerospace, Automotive, Yellow Goods industry 6Sigma Greenbelt qualification Experience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process Capability Experience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniques Demonstrable experience of practical problem-solving techniques using A3 or 8D Desirable: Experience Leading Lean Manufacturing including process standardisation kaizen activities such as 5S Experience in lay-up processes for composite materials Specification interpretation experience We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Senior Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in your approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? JBRP1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. Were looking for a Principal Materials Engineer with a strong non-metallic materials engineering background, to join our materials and test team to support the production and development of next generation composite aero structures, ice protection and transparency products. The role will be based in the Materials, Coatings and Test (MCT) team within the wider Engineering and Technology department and report to the Functional Team Leader. The role as a Principal Materials Engineer will support the business and engineering team, with non polymer materials science and processing knowledge and guidance. The role will provide a deep understanding of the interactions between processing parameters and material properties of composites, Acrylics, Polycarbonates and adhesives, being able to guide and make decisions on new technology test plans and current production deviations. There will be occasional travel, national and international, required to support customer visits and other GKN sites. You will also support the work of the business to establish safe working practices and necessary level of documentation. You will be involved with projects from the planning / assembly / instrumentation / commissioning phase though to successfully performing and reporting the test. You will also be responsible for providing specialist support to existing programmes within your field of expertise, helping to resolve manufacturing issues and supporting continuous improvement efforts. You will have a proven track record of leading and delivering technical work, with strong communication skills being confident working with a broad range of internal and external stakeholders, including non-technical audiences. Job Responsibilities Development of manufacturing processes in relation to polymer, composite and adhesive materials Qualification of materials and processes to assure they comply with the requirements Assessment of deviations from the specified materials and processes requirements to assure continued airworthiness Support operational and development programs to enable and deliver zero defect projects utilizing engineering and problem solving skills. Accountable for delivering robust, manufacturing process technologies as applied to materials, tooling, part fabrication and assembly. Promote GKNs technical capability globally to the broader technical eco-system, including customers, suppliers and steering groups. Collect inputs, related to a task and take it through an identified process to produce an output / deliverable adhering to quality and schedule requirements. Coordination/project lead for REACh activities: identification of arising issues regarding the REACh legislation, providing support and advice locally and to other GKN sites concerning the impact of REACh. Preparing and defining tests/test plans; critical and systematic interpretation and analysis of test data, applying the outcome of tests for substantiation of specification changes. Troubleshooting and production support on Materials Issues (e.g. Composites, polymers, bonding, surface treatments). Maintaining contacts with suppliers regarding alternative/new products. Contribute to the development of GKN as a 'great place to work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Composite or Polymer Materials Science based Degree (or related) Experience in Polymer and Composite material science and processing; familiarity with REACh environmental legislation Significant relevant experience within an industrial engineering discipline, preferably within an Aerospace/Automotive/Marine/Energy sectors Experience with quality systems, specifications, standards, etc. with the ability to oversee the broader field Excellent reporting and project management skills Good English language, both verbally and in writing, Desirable: Ability to plan work through formal project management processes, including scheduling and budgeting and lead a team to ensure successful delivery of required outcomes. An awareness of aerospace certification requirements. A higher degree qualification such as a Masters, PhD or EngD within Aerospace/Automotive/Marine/Energy sectors The successful candidate should have a broad interest in non-metallic material technologies & testing and characterisation techniques. You should want to mentor people in a technical environment. Youll be able to adapt to changing priorities to meet business priorities handling multiple enquires at once. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders, including operations and other business functions. The successful candidate should be adaptable in their approach to work, and be able to adapt to potentially dynamic priorities. As aPrincipal Materials Engineer, the candidate will be naturally curious and seek to increase/deepen their own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Note:Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? JBRP1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. We are seeking a Research Engineer to develop and mature manufacturing process technology to enable low cost, high rate and high-yield manufacturing of aircraft structures with embedded ice protection capability, with a focus on automation and digitalisation to drive innovation and manufacturing excellence. As this is aresearch role, we are looking for an innovative thinker, your work should push the boundaries of conventional engineering in terms of the design and integration of state-of-the-art manufacturing processes whilst appreciating aerospace certification requirements. Youll be comfortable travelling within the UK when needed, with occasional opportunities for international travel depending on programme demands. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s). Contribute to Technology Development Plans and Technology Business Cases within your project(s). Contribute to multi-year planning and internal/external funding proposals as required. Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. You may support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant professional qualification such as HNC/HND/ Degree in engineering (e.g. Automotive, Mechanical, Electrical, Chemical) Good working knowledge of general industrial manufacturing processes, and an interest in understanding new and emerging techniques. Good working knowledge of AS9145 APQP/PPAP requirements and tools supporting Zero Defect Manufacturing approaches. Good working knowledge of Lean manufacturing philosophies and Six Sigma / Statistical techniques for process control and problem solving. A logical and methodical approach to task planning. Good report writing and presentation skills, able to support and present at internal and external technical and project review meetings. You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field. Desirable: • A higher degree qualification such as a Masters, PhD or EngD, • Experience of working with and configuring PLCs (Siemens), • Experience of working with and configuring SCADA systems. The ideal candidate will have experience in equipment procurement, including Capex generation, equipment specification, supplier management, commissioning and buy-off. They will also bring working knowledge of AS9145 APQP/PPAPparticularly MSA, PFMEA and SPCalong with a general understanding of aerospace product certification and qualification requirements. As aResearch Engineer, you will bring an adaptable approach to your work and be comfortable collaborating with colleagues across different areas of expertise to achieve project objectives. You will be naturally curious, proactively deepening your technical knowledge through study, experimentation, hypothesis testing and cross-functional proactive mindset will enable you to quickly understand and adapt to new technology areas, while your strong communication skills will allow you to confidently engage with a wide range of internal stakeholders. This position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. JBRP1_UKTJ

We require a Workshop Manager or Foreman to join our Nationwide Platforms team at the Bedford depot. To manage all workshop and field based engineering activities at the Depot. Ideally someone within a similar industry, with excellent people management experience and with an engineering background. This is a great opportunity to join a thriving business and the UK market leader in powered access. Responsibilities include: • Manage all resources related to the maintenance of a large mixed fleet of Powered Access Equipment., • Ensure effective implementation of all engineering policies and procedures, • Maintain high level of equipment availability and reliability at optimal cost, • Support compliance to all legislative requirements, and internal QHSE standards, • Deliver technical initiatives and projects through to satisfactory outcome, • Ensure continuous improvement in all engineering standards, using best practice, • Produce qualitative and quantitative engineering related information, • Manage workshop labour and administrative resources to achieve all specified maintenance standards and objectives, • Manage appropriate fleet hire availability through day-book, • Provide technical advice to location staff, • Ensure all maintenance actions are carried out to appropriate standard and in within acceptable timescale eg service, Thorough Examination etc, • Ensure all engineering related initiatives are carried out to appropriate standard and within acceptable timescales eg TechX, • Ensure safe systems of work are applied to all activities carried out, • Report on engineering outputs as required, • Report engineering incidents or issues, including warranty failures and customer damage, • Identify collective and individual staff training needs, • Deliver technical ‘tool-box talk' type information sessions to engineering staff, • Maintain appropriate stock holding levels for spares, sundries, fuels and lubricants, • Liaise with external parts and service providers when required, • Contribute to inter-group projects and initiatives, • Develop productive relationships across all regional and inter-regional functions to meet the overall business plan, • Share best practice across all Group Company businesses. The ideal candidate will have: • Previous experience of engineering supervision within a plant hire environment, • Formally trained in an engineering discipline, and qualified to C&G 390, NVQ level 3, or equivalent, • Good upward and downward communication skills, • A Competitive Salary, • Health Cash Plan, • Auto enrolment pension, • 25 days holiday plus bank holidays, • Life assurance x2 contractual salary At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON™, a range of pioneering Material Handling Attachments (MHAs), and the SkySentry™ control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment JBRP1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions. We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. ThePrincipal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support. ThePrincipal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions. This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements. Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation. Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods. Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts. Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements. Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences. Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations. Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction. Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning. You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Degree in Aerospace, Mechanical or similar Experience in Aerospace design / or Aerospace product development. Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements. Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches. Familiarity with digital engineering and model based design preferably using CATIA V5. Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders. Desirable: Expert user of CATIA V5 for complex modelling and drawing creation Chartered Engineer status (CEng) Experience working with defence customers and regulatory authorities. Experience in transparencies, composites, or specialist structures/ systems. This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams. You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? JBRP1_UKTJ

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role sits within our Sensor Systems Business Unit. We are looking for an Electrical Assembler to work on the manufacturing of electronic equipment, through assembly of mechanics and electronics in a small production unit. Your personal skills are important where we have high expectations in cooperation and communication within your team and organization. Main Duties: * Electromechanical assembly and soldering. * Read and understand technical documents for manufacturing purpose. * Handling of documents and non conformancies according to stated processes. * Contribute with continuous improvements within quality, delivery and cost. * Take part in education and support of new employees. * In a clear way be able to communicate status of ongoing work which you are responsible for. Skills and Experience: * A social and good team player. * 3+ years of relevant experience within electromechanical assembly or production. * Manual soldering skills. * Excellent communication skills in English, verbal and written. * High expectations regarding fine motor skills, endurance and accuracy. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our Saab Seaeye Underwater Robotics Business. This is an exciting opportunity to provide hydraulics technical expertise to undertake and support the configuration, specification, sale, production and technical support of subsea hydraulic products for Saab's range of robotic underwater vehicles. Key Responsibilities: • Define and develop configurable solutions that fulfil customer requirements for systems comprising a wide range of electro-hydraulic products manufactured by Saab Seaeye and third parties, • Identify specific products to form subsea hydraulic systems and define the interfaces / fittings, hoses, QDs etc., • Define high level requirements for the product and the associated supporting equipment - working with the supply chain for new purchases, partnerships & providing specifications to engineering teams, • Help to prepare Cost Time and Resource requirements and system quotations for the above, • Draw configuration diagrams in VISIO to communicate system solutions to internal and customer stakeholders and create detailed parts lists, • Support ROV system sales and after sales teams with hydraulics expertise, • Provide technical support for internal production and external customers - advising on fault finding / troubleshooting, • Contribute towards the sales process of all hydraulic products and systems, • Research customer current opinions and future requirements, directly and via the sales and business development team, • Develop strong, long term relationships with clients and work to provide the best possible service Essential: • Degree in relevant Engineering discipline., • experience in engineering, specification and design of Hydraulic systems, with a strong understanding of hydraulic circuit design comprising: Pumps, valves, motors, cylinders, control systems, hoses, fittings and adaptors etc., • ROV or Subsea hydraulic systems product knowledge - Subsea HPU's, valve packs, manipulators, comps etc., • ROV tooling., • Able to draw hydraulic schematics using 2D Autocad.

Company Overview Interfoam Limited is a family-run manufacturing business with over 30 years of experience in producing moulded polyurethane foam and plastic components. We serve diverse industries including automotive and medical, emphasizing trust, quality, and innovation. Our commitment to sustainability is reflected in products like Bio-Pur foam, which reduces carbon emissions while maintaining high performance. About the Role We are seeking an experienced Toolmaker to join our established in-house Tooling team at our Bedford manufacturing site. This is a hands-on role focused on the manufacture, maintenance and repair of moulds and tooling used to produce moulded foam products for sectors including automotive, rail, aviation, and furniture. This position is well suited to an experienced Toolmaker looking for long-term stability, technically varied work, and the opportunity to play a key role in the future development and succession of our tooling function. Key Responsibilities Tool & Mould Manufacture - Produce patterns and master models from technical drawings, templates or foam samples - Manufacture moulds using wet lay or cast resin methods - Machine tooling using CNC (3-axis), lathes, mills and EDM (5-axis advantageous) - Welding and fitting frames, pins and inserts - Hand finishing and polishing moulds - Application of paints and sealants Mould Maintenance & Repair - Repair and modify moulds - Diagnose tooling-related production issues - Carry out modifications to improve quality and efficiency Process & Product Support - Support trials of new foam products and tooling - Optimise venting, draft angles and parting lines - Work with engineers and designers Quality & Continuous Improvement - Measure and inspect tooling - Ensure durability and repeatability - Contribute to continuous improvement General Duties - Liaise with Sales on tooling requirements - Maintain a safe and organised workshop - Follow Health & Safety procedures Full job description available on request. Skills & Experience Required Essential: - Proven Toolmaker / Precision Engineer experience - Ability to interpret technical drawings - Experience working with wood, metals and resins - Skilled in 3-axis CNC machining, milling, turning and welding - Strong problem-solving skills - Good communication skills Desirable: - Foam or composite tooling experience - 5-axis CNC experience - Understanding of foam behaviours Qualifications - NVQ Level 3 / City & Guilds or equivalent - BTEC / HNC / HND in Engineering - Completed apprenticeship What We Offer - Competitive salary (dependant on experience) - Early Friday finish - Secure permanent role - In-house tooling work - Opportunity to contribute to long-term tooling succession - Supportive team environment This advert has been prepared for direct hiring purposes. Agency terms not accepted unless agreed in advance. TPBN1_UKTJ

Zenon Aviation is proud to be assisting a reputable and well-established operator in their search for an experienced EASA B1 ATR42/72TR licensed engineer to support their operations based in the UK, with hotel accommodation provided on a contract basis. In the ever-changing and dynamic marketplace,

The Configuration and Data Management Specialist will provide CM/DM support to fixed and rotary wing programmes and campaigns, ensuring consistent application of standards, processes, and regulatory requirements across the organisation.Job Title: Configuration and Data Management Specialist Locatio

Zenon Aviation is proud to be assisting a reputable and well-established operator in their search for an experienced EASA B1 ATR42/72TR licensed engineer to support their operations based in the UK, with hotel accommodation provided on a contract basis. In the ever-changing and dynamic marketplace,

This is a great opportunity to work within a highly respected aviation environment, to play a key role in compliance, safety, and operational excellence, with an opportunity to influence process improvement and best practice whilst collaborating across multiple technical and operation

Our client has an opportunity for a Senior Building Surveyor to join them on a permanent basis.You'll play a key role in supporting the continued growth across the North West of England, working on a wide variety of projects including condition surveys, technical due diligence, forensic surveyin

JMC Aviation are working with an MRO company based in Brize Norton, looking to recruit a new. Good awareness of Aviation safety. If you think this is the role for you and you have the necessary skills and attributes, please apply today or contact JMC Aviation for more details.

As the organisation continues to invest in infrastructure and expand capabilities, you will have the chance to contribute to a range of exciting projects and be part of a growing aviation operation. We are the world’s leading aviation and aerospace recruitment and executive search firm, trusted by

TARCG is currently seeking a Quality Inspector who will be responsible for inspecting and evaluating materials and products to meet industry standards and regulations.The successful candidate will also be responsible for checking the quality of all incoming and outgoing material and products as per

At JMC Aviation, we specialise in aviation recruitment across engineering services and training to airlines, MROs and OEMs, leasing and asset management companies, and component overhaul organisations. Extensive experience and knowledge of the aviation sector. JMC Aviation is committed to equal oppo

We are the world’s leading aviation and aerospace recruitment and executive search firm, trusted by the most respected names in the industry to deliver results with integrity, discretion, and excellence. Oaklands Global are currently recruiting Avionics Design Engineers on behalf of a leading glob

Technical Services Manager (Aviation) - Part 145 / CAMO for this prestigious private and corporate aviation MRO facility based at Stansted Airport.

Compliance Engineer (Aviation Audit / Part 145)£45,000 - £50,000 + Generous Annual Leave + Enhanced Pension Scheme + Life Assurance + Employee Cash Plan + Pay and Role Progression + Electrical Vehicle SchemeStanstedAre you an experienced Compliance Engineer looking to establish yourself in a centr

We’re looking for an experienced Ticketing & Aviation Manager for a super opportunity with a leading Tour Operator, based from either their West London, or Birmingham office. The successful candidate will be responsible for the day to day management of our client’s ticketing team, to include bui

Dependant on experience (+commission).TARCG is currently seeking an Inside Sales Representative to work with our aerospace client based in West Yorkshire.The successful candidate will be responsible for managing smaller aerospace accounts along with an orderbook, as well as driving sales growth.The

This is a superb opportunity to join a supportive, fun, and ambitious team working on high-profile B2B and corporate communications programmes within the aviation and travel space. The chance to work on fascinating aviation and travel campaigns with real global impact.

Training and long-term career development in private aviation. If you already have private aviation experience and enjoy managing HNW client relationships, this is a rare opportunity to progress in the private jet charter space - all from the comfort of your home. We’re looking for an experienced

PDG Aviation Services is one of the leading onshore helicopter operators in the UK and Ireland. We provide exposure to a wide range of aviation services, allowing employees to develop valuable technical and operational skills. At PDG, we have a strong team culture and commitment to high standards ma

TARCG - The Aviation Recruitment & Consulting Group.

Aviation Safety, Quality and Compliance Manager - Corporate and private jet MRO have an opportunity for a highly qualified and experienced Safety, Quality and Compliance Manager (form 4 holder) to play a pivotal role in the organisation's commitment to aviation safety and regulatory compliance.

What You Will DoDeliver engaging lessons across Level 1 to Level 3 travel, aviation and cabin crew coursesShare your real-world industry experience to bring learning to lifeSupport learners to develop practical skills and confidence for careers in travel, tourism, and aviationAssess learner progress

Job Title: Teacher - Travel, Aviation and Cabin Crew (Maternity Cover)Salary: Commencing at £31,138 with progression to £35,036 per annumClosing Date: 2026-04-19About the RoleThis is a fixed-term contract from August 2026 until July 2027. Leeds City College are recruiting for a Teacher of Travel,

A leading global insurance company in London seeks an Executive Director - Aviation Insurance Broking to lead a dynamic broking team. This role requires extensive experience in Aviation insurance and proven client relationship management skills.

The ideal candidate should have expertise in aviation and strong business acumen, contributing to complex project execution and client advisory services. A leading global transportation consultancy in the UK is seeking a Technical Director for its Aviation Advisory business.

We are seeking a Senior Cost Manager to join our Real Estate Fit Out team, supporting major aviation programmes in London and the surrounding area. Lead cost management delivery across fit‑out packages within large aviation estates. Experience in Aviation is desirable.