Cmm jobs in FarnhamCreate job alerts

Technical Authors (Multiple roles available) Farnborough (First month on-site, then 90% remote) Rate: £30- £35 per hour IR35 Status: Outside IR35 Start Date: Approx. 2 weeks Duration: 12 months initially (strong likelihood of extension) Clearance: Not needed but a bonus Summary Our client is currently supporting a major aerospace documentation programme and are looking for experienced Aerospace Technical Authors to join a long-term project based in Farnborough, with hybrid working available. This role will suit seasoned aerospace documentation specialists with strong experience working to ATA100 and S1000D standards, along with Adobe FrameMaker. The initial contract is expected to run for at least 12 months, with the potential for longer-term extensions as the programme develops. Key Responsibilities You will be responsible for the creation, maintenance, and conversion of aircraft technical documentation, supporting a large-scale aerospace publishing programme. Work will include both ATA100 manuals and S1000D conversion projects across a wide range of aircraft documentation. Requirements • Proven experience as an Aerospace Technical Author, • Strong working knowledge of ATA100 and S1000D, • Experience producing or converting aircraft technical manuals, • Proficiency with Adobe FrameMaker, • Ability to work within large aerospace documentation programmes Documentation Scope ATA100 Manuals • Aircraft Flight Manual (AFM), • Aircraft Maintenance Manual (AMM), • Illustrated Parts Catalogue (AIPC), • Master Minimum Equipment List (MMEL) S1000D Conversions • MMEL, • AFM, • AMM, • AIPC S1000D Documentation • Aircraft Maintenance Programme (AMP), • Aircraft Recovery Manual (ARM), • Component Maintenance Manual (CMM), • Component Parts Catalogue (CPC), • Fault Isolation Manual (FIM), • Minimum Equipment List (MEL), • Maintenance Planning Document (MPD), • Structural Repair Manual (SRM), • Service Bulletins (SB), • Wiring Diagram Manual (WDM), • Weight & Balance Manual (WBM), • Standard Wiring Practices Manual (SWPM), • System Schematic Manual (SSM) CV submissions: Apply Now, CV Deadline Wednesday!

Key Responsibilities:Inspects and approves incoming/outgoing materials/products by confirming specifications, conducting visual and measurement tests, and reporting to Head of Inspection/QA any non conforming materials/products.Perform first off, in-process and final inspection by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor/operator.Read technical drawings, control plans, and specifications to understand the requirements of products and services.Document inspection results by completing reports and logs, summarizes re-work and waste, and inputs data into quality database. Raising and signing release documents (CofC, Advice Notes, etc.)Keeps measurement equipment operating by following operating instructions and calibration requirements, and reporting to QA any faulty or out of calibration equipment.Communicating with the Quality/Engineering department about how to prevent similar defects in the future.Carry out such other reasonable duties within the business from time to time.Adhere to the company’s health and safety requirements and complete training as required.Skills and Qualifications/experience: • A minimum of 3-5 years experience in a similar role (preferred)., • Strong understanding of quality control/inspection standards and testing techniques/methods (use of micrometers, verniers, DTis, height gauges, shadowgraphs, CMM, etc.) (required)., • Strong understanding technical drawings and GD&T (required)., • RCCA knowledge (including 8D methodology), • Good math and technical skills (required)., • Good knowledge of MS Office (preferred)., • General knowledge of gear metrology (preferred)., • FAIR/PPAP knowledge (preferred)., • Ability to work in fast paced environment/under pressure (required).

Quality Inspector Aldershot £18 - £20ph Plus Shift Allowance Quality Inspector Urgently required to work for a world leading Engineering organisation based in Aldershot, We are looking for an experienced Inspector who ideally has experience of inspection of aerospace and aviation compliant equipment. This is a critical role to the business and you will be required to conduct a range of mechanical inspection, document inspection results, input data into quality database, raising and signing release documents in line with QMS directives and customer requirements. This is an out and out quality inspection role that will require the use of micrometers, verniers, DTis, height gauges, shadowgraphs, CMM, etc. Key Responsibilities: Inspection and approval of incoming/outgoing materials and products by confirming specifications, conducting visual and measurement tests Reporting to Head of Inspection/QA any non conforming materials/products. Perform first off, in-process and final inspection by confirming specifications, conducting visual and measurement tests, communicating required adjustments. Read technical drawings, control plans, and specifications to understand the requirements of products and services. Document inspection results by completing reports and logs, summarizes re-work and waste, and inputs data into quality database. Raising and signing release documents (CofC, Advice Notes, etc.) Keeps measurement eq...

Technical Authors (Multiple roles available) Farnborough (First month on-site, then 90% remote) Rate: £30- £35 per hour IR35 Status: Outside IR35 Start Date: Approx. 2 weeks Duration: 12 months initially (strong likelihood of extension) Clearance: Not needed but a bonus Summary Our client is currently supporting a major aerospace documentation programme and are looking for experienced Aerospace Technical Authors to join a long-term project based in Farnborough, with hybrid working available. This role will suit seasoned aerospace documentation specialists with strong experience working to ATA100 and S1000D standards, along with Adobe FrameMaker. The initial contract is expected to run for at least 12 months, with the potential for longer-term extensions as the programme develops. Key Responsibilities You will be responsible for the creation, maintenance, and conversion of aircraft technical documentation, supporting a large-scale aerospace publishing programme. Work will include both ATA100 manuals and S1000D conversion projects across a wide range of aircraft documentation. Requirements • Proven experience as an Aerospace Technical Author, • Strong working knowledge of ATA100 and S1000D, • Experience producing or converting aircraft technical manuals, • Proficiency with Adobe FrameMaker, • Ability to work within large aerospace documentation programmes Documentation Scope ATA100 Manuals • Aircraft Flight Manual (AFM), • Aircraft Maintenance Manual (AMM), • Illustrated Parts Catalogue (AIPC), • Master Minimum Equipment List (MMEL) S1000D Conversions • MMEL, • AFM, • AMM, • AIPC S1000D Documentation • Aircraft Maintenance Programme (AMP), • Aircraft Recovery Manual (ARM), • Component Maintenance Manual (CMM), • Component Parts Catalogue (CPC), • Fault Isolation Manual (FIM), • Minimum Equipment List (MEL), • Maintenance Planning Document (MPD), • Structural Repair Manual (SRM), • Service Bulletins (SB), • Wiring Diagram Manual (WDM), • Weight & Balance Manual (WBM), • Standard Wiring Practices Manual (SWPM), • System Schematic Manual (SSM) CV submissions: Apply Now, CV Deadline Wednesday!

Based in Aldershot, Hampshire, our client offers high-quality precision prototyping CNC machining and assembly services to the UK market. They specialise in the Aerospace, Defence, Formula 1 and Petrochemical industries. Their key strengths include computer-aided machining, rapid prototyping, and 5 axis work. Offering a full range of services, with the ability to machine directly from 3D CAD files to finite tolerances backed by full CMM inspection through to finishing, assembly, and despatch. They use the latest, state of the art equipment and software to ensure machining and manufacturing departments are operating at the highest standards. JOB ROLE: CNC Turner JOB TYPE: Permanent OPENING HOURS: Monday to Thursday (7 AM until 5:30 PM) & Friday (7 AM until 1 PM) WORKING HOURS: 40 hours per week Flexible (As long as you complete your 40 hours within the opening hours). OVERTIME: Overtime is consistently available and is paid at time-and-a-half. DUTIES & RESPONSIBILITIES Programming, setting, and running Doosan Puma CNC lathe, and Goodways CNC lathes, using Fanuc controls, with live tooling. Producing precision machined components to tight tolerances, for a range of industries, including Aerospace, Defence, Formula 1, and more. Working from detailed technical engineering drawings. E...

Mechanical Inspector We’re looking for an experienced Mechanical Inspector to join a busy precision engineering business.You’ll be responsible for ensuring parts and components meet the highest standards of quality and accuracy, working across both manual and CMM inspection.What you&rsq

Based in Aldershot, Hampshire, our client offers high-quality precision prototyping CNC machining and assembly services to the UK market. They specialise in the Aerospace, Defence, Formula 1 and Petrochemical industries. Their key strengths include computer-aided machining, rapid prototyping, and 5 axis work. Offering a full range of services, with the ability to machine directly from 3D CAD files to finite tolerances backed by full CMM inspection through to finishing, assembly, and despatch. They use the latest, state of the art equipment and software to ensure machining and manufacturing departments are operating at the highest standards. JOB ROLE: CNC Turner JOB TYPE: Permanent OPENING HOURS: Monday to Thursday (7 AM until 5:30 PM) & Friday (7 AM until 1 PM) WORKING HOURS: 40 hours per week Flexible (As long as you complete your 40 hours within the opening hours). OVERTIME: Overtime is consistently available and is paid at time-and-a-half. DUTIES & RESPONSIBILITIES Programming, setting, and running Doosan Puma CNC lathe, and Goodways CNC lathes, using Fanuc controls, with live tooling. Producing precision machined components to tight tolerances, for a range of industries, including Aerospace, Defence, Formula 1, and more. Working from detailed technical engineering drawings. Ensure all manufactured components meet the highest standards of quality and precision. Work closely with the engineering team to optimise processes and meet production deadlines. Troubleshoot and resolve any technical issues that may arise during machining. REQUIREMENTS Previous experience in a CNC turning position within a precision machining environment is required. Previous experience programming using Fanuc controls is required Ideally working on3 axis machinery with live tooling C axis (X,Z,C Previous experience with live tooling is desirable. Strong communication skills and the ability to collaborate effectively with colleagues. Commitment to adhering to workplace safety standards and practices. Demonstrated ability to work with precision and maintain high-quality standards. HOLIDAY ENTITLEMENT: 26 days per year + all bank holidays (35 days in total) + Christmas shutdown. TPBN1_UKTJ

A precision engineering firm in Farnborough is seeking an experienced Mechanical Inspector. The ideal candidate has a strong background in mechanical inspection, uses various metrology tools confidently, and understands GD&T principles.

Job title: Quality Inspector Job Type: Lates, Perm Location: Aldershot Hours: Mon – Thurs 14:45 – 00:00 Salary: £41,500 - £46,000 Main Purpose of Job: You will perform mechanical inspection, document inspection results, input data into quality database, raising and signing release documents (CofC, Advice Notes, etc.) in line with company directives (QMS) and customer requirements. Key Responsibilities: Inspects and approves incoming/outgoing materials/products by confirming specifications, conducting visual and measurement tests, and reporting to Head of Inspection/QA any non-conforming materials/products. Perform first off, in-process and final inspection by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor/operator. Read technical drawings, control plans, and specifications to understand the requirements of products and services. Document inspection results by completing reports and logs, summarizes re-work and waste, and inputs data into quality database. Raising and signing release documents (CofC, Advice Notes, etc.) Keeps measurement equipment operating by following operating instructions and calibration requirements and reporting to QA any faulty or out of calibration equipment. Communicating with the Quality/Engineering department about how to prevent similar defects in the future. Carry out such other reasonable duties within the business from time to time. Adhere to the company’s health and safety requirements and complete training as required. Skills and Qualifications/experience: A minimum of 3-5 years’ experience in a similar role (preferred). Strong understanding of quality control/inspection standards and testing techniques/methods (use of micrometers, verniers, DTis, height gauges, CMM, etc.) (required). Strong understanding technical drawings and GD&T (required). Good math and technical skills (required). Good knowledge of MS Office (preferred). General knowledge of gear metrology (preferred). FAIR/PPAP knowledge (preferred). Ability to work in fast paced environment/under pressure (required). Benefits: Holiday entitlement: 4/5ths of 33 days, so 26.5 days, incl. bank holidays; pro-rata depending on start date. The holiday year runs from 1 November – 31 October. Pension scheme: salary sacrifice scheme; 3.5% employer contribution after 3 months of continuous work; 5% employee contribution Group Life cover: 4 x current basic annual salary Specsavers Eyecare Vouchers Cycle Scheme (subject to scheme eligibility criteria) What next? Do you have the experience? The company welcome a site visit to ensure you are happy with the role, the environment and the people you will work with! If you would like to speak to someone regarding being booking an interview then please contact Tom Edney on (phone number removed) for more information or send an email to (url removed) Immediate starts are available! WF Tech are responsible for placing skilled and in demand people on both a permanent and contract basis into the Precision & Advanced Manufacturing sectors, from skilled Machining Personnel and Specialist Engineers to Supervisory and Management positions. Our Specialist Consultants will have an in-depth understanding of your skills and offer best advice on your next step!! We are always searching for the best talent, so if you know anyone, why not recommend someone to one of our professional team who will be more than happy to help. METE

Manufacturing Engineer – NC/CMM Programmer (Machining) Location: BAE Systems Warton Contract: 12 months Working Pattern: 4–5 days on site per week Security Clearance: BPSS required, SC in Flight (UK Eyes Only, subject to ITAR) The Role We are seeking a Manufacturing Engineer – NC/CMM Programme

CMM Programmer Bathgate, ScotlandLocation: Bathgate, West LothianJob Type: Full-time, PermanentIndustry: Precision Engineering / ManufacturingAbout the RoleA leading engineering organisation is seeking an experienced CMM Programmer to join their inspection team.

Contract CMM Programmer - AerospaceLocation: Titchfield, Hampshire Contract Type: PAYE Contract - Inside of IR35 Industry: Aerospace & DefenceOverviewOur aerospace client in Titchfield is seeking an experienced CMM Programmer to join their team on a contract basis.

CMM ProgrammerLocation: NewburySalary: £35,000 - £40,000 paJob type: PermanentOrion are currently supporting a manufacturing business in Newbury to find their new CMM Programmer to join the team! The role involves programming and operating CMM equipment to ensure all manufactured parts meet custom

CMM TechnicianResponsible for performing and improving quality inspection processes of precision components. Excellent opportunity for an experiencedCMM Technician to join an establis.

New Role - Quality / CMM Inspector - TamworthAre you an experienced Quality Inspector / CMM Inspector? Jump on board with a company that not only gets your vibe but also gives you a cool place to work.

Job Title: CMM ProgrammerJob Type: PermanentSalary: Up to £40,000 p. Whats on offer for the CMM Programmer:33 days holiday (Inclusive of BHs)On-going training and development plansWorkwear provided. Due to continued growth Next Generation are recruiting for a CMM Programmer to work with a well-esta

They are seeking an experiencedCMM Operatorto join their precision engineering team.

We are seeking an experienced CMM Programmer, with knowledge of LK metrology Camio software or PC-DMIS for a 6-month role in Worcestershire. This typically involves checking the CMM programs have the correct nominal/tolerances programm.

Are you looking for a new and exciting challenge, with a forward thinking organisation within the high tech engineering sector? The Hyde Group are established industry experts and have vacancies for a CMM Inspector working in our manufacturing facility in Denton.

Are you an experienced Quality Inspector with CMM experience looking for a role on a late shift?Do you enjoy working in a machine shop environment where precision and accuracy are critical?Were working with a specialist engineering business in Fareham who are looking to recruit a Quality Inspector t

The Service Engineer is responsible for delivering high-quality technical support and services for Hexagon Metrology’s CMM product portfolio.

Programming, modifying and optimising CMM inspection routines across complex components. Familiarity with CMM software such as PC DMIS, Calypso, CAMIO or similar. You will join a rapidly growing aerospace manufacturer offering clear progression into a CMM Programming position.

The Service Engineer is responsible for delivering high-quality technical support and services for Hexagon Metrology’s CMM product portfolio.

A well-established advanced manufacturing organisation is looking for a Metrology / CMM Engineer to optimize CMM processes and improve measurement capabilities. The candidate should have experience in aerospace or precision engineering, proficiency in CMM programming software like PC-DMIS, and a str

The role involves creating new programs to align a CMM machine, reviewing current programs for efficiency, and enhancing inspectors' understanding of CMM programming. A leading engineering firm based in Worcestershire is seeking an experienced CMM Programmer for a 6-month contract.

A leading engineering and manufacturing organization based in Leamington Spa seeks an experienced CMM Programmer to join their high-precision environment. Responsibilities include developing CMM programs, performing dimensional inspections, and collaborating with engineering teams to enhance quality

The candidate will be responsible for programming CMM machines and creating calibration programs using Mitutoyo software.

A leading global company in manufacturing intelligence is seeking a Service Engineer to deliver high-quality technical support for their CMM product portfolio.

A cutting-edge aerospace firm in the UK seeks a Metrology Engineer to develop and execute metrology strategies.The successful candidate will implement measurement practices aligning with industry standards, lead inspections using advanced tools, and collaborate across teams to support continuous imp

A leading aerospace manufacturer in North Kesteven is seeking a CMM Technician Operator to support high-integrity inspection activities. The successful candidate will produce detailed inspection reports, optimize CMM inspection routines, and collaborate with engineering teams. This role offers signi

Experience working with CMM equipment is a must for this role also. Familiarity with Coordinate Measuring Machines (CMMs) is a strong advantage.

A multinational aerospace company is seeking a skilled Proof Inspector in the East Midlands.Responsibilities include conducting proof inspections on blades and fixtures while programming Coordinate Measuring Machines.The ideal candidate has experience with MCOSOMOS Mitutoyo software and Polyworks or

A leading defense contractor is seeking a Manufacturing Engineer with expertise in NC/CMM programming in Warton, UK.

Candidates should be proficient in CMM programming and familiar with inspection tools.

A leading global technology firm in the UK is looking for a Service Engineer to provide high-quality technical support for their CMM product portfolio.

Candidates must have completed an advanced engineering apprenticeship and have experience with CMM programming and CAD software.

A leading engineering firm is seeking a Service Engineer to deliver high-quality technical support for their product portfolio.Responsibilities include equipment installation, maintenance, and customer interaction to ensure satisfaction.The ideal candidate has at least 4 years of industry experience

CMM Inspector Responsibilities. Develop, edit, and validate CMM programs using MCOSMOS software (including CAT1000) from 3D models and 2D engineering drawings. Carry out dimensional inspections using CMM equipment and precision measurement tools such as micrometers, verniers, and height gauges.

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 40-week sessional post i.To assist in the provision of a high quality cleaning service within Council buildings.Please download the Job Outline/Person S

Bannatyne is renowned for providing exceptional fitness and wellness experiences across the UK.We are committed to maintaining the highest standards of cleanliness and hygiene to ensure our members have a safe and welcoming environment.We are currently looking for a dedicated and detail-oriented Mem

Part-Time / Seasonal - working Mondays and Fridays.Join our One Great Team here at Haven as an Accommodation Cleaner, where you'll help create spotless, welcoming spaces for our guests to enjoy their next adventure!.We're looking for reliable, detail-focused team members to take care of our accommod

Type: Full-time / Part-Time / Seasonal.Join our One Great Team here at Haven as a Venue Cleaner, where you'll help create spotless, welcoming spaces for our guests to enjoy their next adventure!.We're seeking reliable, detail-oriented team members to keep our holiday park facilities shining.If you t

Public Area Cleaner - Hook, Hampshire.Maintain high standards of cleanliness and presentation across all hotel public areas, including lobbies, corridors, restrooms, and entrances.Ensure all floors, surfaces, furniture, and fixtures are cleaned and maintained to the hotel’s quality standards.Regul

Accommodation Cleaner - Hayling Island - Hayling Island, Hampshire .Job title – Accommodation Cleaner.Location – Meadow Bay Villages, Hayling Island Holiday Park, Hayling Island, PO11 0QS.Part Time, Seasonal, Mondays & Fridays with possible overtime.We are looking for part time accommodation

As a Cleaner for Tenpin, you will be responsible for ensuring our Customers have an.When it comes to keeping your site spick and span, we will need you to bring your 'A' game.We love to entertain! It's in our DNA!.We have lots more to offer from Houdini's Escape Rooms, to Karaoke rooms, 4D Laser Are