Cmm jobs in LeicesterCreate job alerts

Job Title: Quality Inspector / Level 2 NDT Technician (Night Shift) Location: Leicester Salary: £22.98 per hour (inclusive of shift allowance) Shift: Night Shift – Monday to Thursday, 18:00 – 06:00 Benefits: Permanent night shift, long weekends (4-day week), stable manufacturing environment, opportunity to work within a precision engineering business supplying highly regulated industries. Quality Inspector / Level 2 NDT Technician – Night Shift A well-established precision engineering manufacturer is seeking a Quality Inspector / Level 2 NDT Technician to join its quality team on a permanent night shift. This position plays a critical role in ensuring that manufactured components meet strict quality and compliance standards within a highly regulated production environment. The successful candidate will be responsible for inspection activities, non-destructive testing, and supporting quality assurance processes to maintain the highest product standards across production. Key Responsibilities Inspection • Conduct First Article Inspection (FAI), receipt inspection, and in-process inspection using both CMM and manual measurement techniques, • Run CMM programmes, analyse results, and make appropriate quality decisions, • Maintain and manage CMM programme integrity and documentation, • Support internal non-conformance processes, including raising rejects and ensuring appropriate containment, • Work closely with the Engineering team during New Product Introduction (NPI), • Complete FAIR packs using both CMM and manual inspection methods, • Carry out inspection and calibration activities as required to support production Non-Destructive Testing (NDT) • Perform MPI, DPI and visual inspections in line with approved procedures, • Ensure NDT equipment is maintained and suitable for operation, • Conduct required control checks and tests, • Interpret and evaluate results against defined acceptance standards, • Prepare and authorise product test reports, • Generate work instructions for Level 3 approval, • Manage inspection workflow to support production priorities, • Maintain Level 2 certification in the relevant NDT method Candidate Requirements • Minimum 5 years’ experience in a quality inspection role within aerospace or automotive manufacturing, • Level 2 NDT certification in Penetrant Inspection (DPI), • Experience operating CMM equipment and manual inspection tools, • Strong understanding of FAIR documentation and quality standards, • Experience working with SOPs and controlled documentation, • Ability to work to production timelines in a manufacturing environment Personal Attributes • Strong attention to detail and commitment to quality, • Self-motivated with a proactive approach to problem solving, • Able to manage workload and prioritise tasks effectively, • Comfortable working in a team-based manufacturing environment, • Capable of working to tight deadlines and production schedules Apply If you are an experienced Quality Inspector with Level 2 NDT certification looking for a permanent night shift opportunity within a precision engineering environment, we would welcome your application. Pertemps Engineering Division Specialists in Manufacturing, Engineering and Technical Recruitment across the UK.

NDT Technician Location: Leicester - Leicester Forest EastSalary: £38k during training (Days) £47k once competent (Nights)Shift: Monday to Thursday 12 hour shift The Opportunity Are you an experienced NDT professional looking to take the next step in your career with a growing, forward-thinking business?Our client is expanding rapidly as their order book continues to grow, and they are now seeking a motivated NDT Technician to join their skilled and supportive inspection team. What You’ll Be Doing • Manage workflows effectively to meet production and delivery schedules., • Conduct detailed inspections to ensure product conformity with customer specifications., • MPI (Magnetic Particle Inspection), • DPI (Dye Penetrant Inspection) What We’re Looking For • Experience within the aerospace sector is ideal, but we also welcome candidates with backgrounds in other high-integrity, quality-driven industries., • A sharp eye for detail, strong inspection skills, and a commitment to quality are essential. You’ll receive three months of structured training, giving you a solid foundation in the client’s inspection processes, products, and quality expectations — ensuring you're fully supported from the start. Why This Role? • Stable, established, and growing business, • A team where quality truly matters, • Genuine investment in your development Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing and retaining the best talent from shop floor to boardroom. • Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services – permanent and temporary., • Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract., • Ford & Stanley Executive Search – Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe.

Job Role: NDT Inspector Location: Leicester Shift: AM, PM, Night Shift Rotation Pay Rate: £19.17 per hour (incl. shift premium) Benefits: 26 days floating + 7 statutory days (this holiday entitlement increases after 10 years to 27 days) Company events Company pension Cycle to work scheme Employee discount Free parking On-site parking Sick pay Store discountSupplemental pay types: Bonus scheme Quarterly bonusAbout the Company: Our client manufactures and machines complex highly technical castings for the Aerospace sector. About the Role: To complete fluorescent penetrant inspection, visual inspection, and dimensional inspection on industrial components in line with strict procedures and specifications. Key Responsiblites: To inspect work, ensuring that strict conformance is met To sign off batch cards detailing components are in line with specification and meet customer requirements To raise any conformance issues and any relevant paperwork in line with Company procedure To maintain FPI level 2 accreditation as required. First off inspections Receipt inspection (validation of parts returning from subcontract locations) Complete conventional and CMM inspection work as an independent over check for parts Understand engineering drawings for the purpose of inspection Complete visual inspection of parts during the inspection process. Undertake airflow Inspection tasks as required Consistently achievin...

Elevata are working with an Aerospace manufacturer who are looking for an NDT Technician/Quality Inspector to join their team. Job Duties: • Conduct 1st off inspection (CMM / Manual) / Receipt Inspection / Inspection and Calibration activities as required to support operations, • Completion of FAIR packs, • Perform inspections such as MPI, DPI and Visual, • Ensure equipment is maintained, • Carry out control checks and tests, • Evaluate test results against acceptance standards, • Ensure parts are processed in a timely manner, • Generate work instructions in preparation for Level 3 approval Job Requirements: • 5 years' experience in the Aerospace/Automotive industry in a similar role, • Level 2 NDT Certificate in Penetrant Inspection Salary & Hours: • £53,564.16 per annum JBRP1_UKTJ

Were recruitingexperienced CNC Machinists(Millers, Grinders and EDM Operators) to join awell-established, growing manufacturersupplying high-precision components to theaerospace and power generation industries. Weve partnered with this business for over20 years, and theyre known for theirexcellent working environment, strong leadership, and long-term career prospects. Whats on offer £19.00 per hour (including shift allowance) 37 hours per week no weekends 3-shift rotation(days during training) Bonus scheme Overtime available and paid at enhanced rates 26 days holiday + 7 bank holidays Permanent, secure role with a growing manufacturer The role Youll operate CNC machinery to produce high-quality, precision components, ensuring all work meetsstrict quality and customer standards. Key responsibilities include: Operating CNC Milling, Grinding or EDM machines Machining parts in line with approved method specifications Reading and interpreting engineering drawings Setting up fixtures and aligning components correctly Self-inspecting parts using manual measuring equipment Supporting inspections using CMM equipment Achieving production, quality and housekeeping targets Working in full compliance with quality, safety and company procedures What were looking for Previous experience inCNC Milling, Grinding or EDM Ability to read and understand engineering drawings Experience inspecting your own work to quality standards Aerospace experience is advantageous butnot essential Willingness to develop machine setting skills Strong attention to detail and pride in quality workmanship Shift pattern (no weekends) Morning 05:45 13:45 (MonThu) 05:45 10:45 (Fri) Afternoon 13:45 21:45 (MonThu) 10:45 15:45 (Fri) Night 21:45 05:45 (MonThu) 15:45 20:45 (Fri) Please note:Sponsorship is not available. Applicants must have theRight to Work in the UK. TPBN1_UKTJ

A leading manufacturing company in Wigston is seeking an experienced NDT Inspector to perform inspections on aerospace components.

Job Role: EDM Machine Operator Location: Leicestershire, LE18 Shift: Three shift rotation Pay: £18.38 per hour incl. shift allowance Benefits: Permanent position Training and career development opportunities within a global engineering organisation Secure and long-term career prospects in a world-leading manufacturing business The Company: A specialised manufacturer in both precision aerospace components and large industrial gas turbine parts, making us a trusted supplier to key industries across the globe. The EDM Machine Operator Role: We are seeking an EDM Machine Operator to join a highly skilled manufacturing team. The successful candidate will operate and maintain CNC Electrical Discharge Machines (EDM) to deliver high-quality aerospace and industrial components in line with production requirements. Key Responsibilities Operate and maintain CNC EDM machinery to meet daily production schedules Set up machines in accordance with approved methods, working towards full proficiency in machine setting Interpret engineering drawings to ensure accurate fixture and tooling alignment Perform part inspections using manual gauges and Coordinate Measuring Machines (CMM) Meet production targets for quality, output, and housekeeping, as defined by the Cell Manager Adhere to company policies, including SOX compliance, Code of Conduct, and Health & Safety standards About You: Previous EDM experience not required - full training will be provided CNC machining experience is advantageous but not essential Experience within the aerospace or precision engineering sector is desirable Ability to read and understand technical engineering drawings Strong self-inspection skills using manual measurement equipment Proactive attitude with a strong focus on quality, safety, and continuous improvement How to Apply: To apply for the EDM Machine Operator position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and next steps

CNC Machinists(Grinders and EDM Operators) required for Weekend Day Shift 05:45 17:45 (FriSun) to join awell-established, growing manufacturersupplying high-precision components to theaerospace and power generation industries. Weve partnered with this business for over20 years, and theyre known for theirexcellent working environment, strong leadership, and long-term career prospects. Whats on offer £19.62 per hour (including shift allowance) 36 hours - Weekends only Bonus scheme Overtime available and paid at enhanced rates 26 days holiday + 7 bank holidays Permanent, secure role with a growing manufacturer The role Youll operate CNC machinery to produce high-quality, precision components, ensuring all work meetsstrict quality and customer standards. Key responsibilities include: Operating CNCGrinding or EDMMachines, ensuring that parts are machined in accordance with the agreed method specification. Attain machine setting skills to enable machine set ups in line with Company requirements Understanding of engineering drawings, ensuring that fixtures are correctly aligned. Inspecting parts in line with quality procedures and taking any necessary, approved, action to resolve quality issues Operating CMM machines to support inspection requirement. Consistently achieving all targets (production, quality, housekeeping etc), as set by the Cell Manager Adherence to all companypolicysand procedures, including SOX, Code of Conduct and Health and Safety. Working in full compliance with quality, safety and company procedures Requirements for the position of the CNC Operator: Demonstrated experience in CNC machining and/or a strong academic background in engineering, ideally supported by a recognised machining apprenticeship. Previous experience working with metal components. Ability to read and interpret engineering drawings. Proficient in conducting self-inspection of machined components using manual measurement tools. Desirables: Previous experience in CNC Grinding or EDM is advantageous but not essential. Experience within an Aerospace sector is advantageous. Positive attitude and a keenness to learn. Experience with CNC programme editing or basic G code adjustments. Strong attention to detail. Ability to work independently with minimal supervision Strong problem solving mindset. Please note:Sponsorship is not available. Applicants must have theRight to Work in the UK. TPBN1_UKTJ

CNC Machinists(Grinders and EDM Operators) required for Weekend Night Shift 17:45 05:45 (FriSun) to join awell-established, growing manufacturersupplying high-precision components to theaerospace and power generation industries. Weve partnered with this business for over20 years, and theyre known for theirexcellent working environment, strong leadership, and long-term career prospects. Whats on offer £21.98 per hour (including shift allowance) 36 hours - Weekends only Bonus scheme Overtime available and paid at enhanced rates 26 days holiday + 7 bank holidays Permanent, secure role with a growing manufacturer The role Youll operate CNC machinery to produce high-quality, precision components, ensuring all work meetsstrict quality and customer standards. Key responsibilities include: Operating CNC3-axis, 5-axis and 7-axisGrindingMachines, ensuring that parts are machined in accordance with the agreed method specification.. Attain machine setting skills to enable machine set ups in line with Company requirements Understanding of engineering drawings, ensuring that fixtures are correctly aligned. Inspecting parts in line with quality procedures and taking any necessary, approved, action to resolve quality issues Operating CMM machines to support inspection requirement. Consistently achieving all targets (production, quality, housekeeping etc), as set by the Cell Manager Adherence to all companypolicysand procedures, including SOX, Code of Conduct and Health and Safety. Working in full compliance with quality, safety and company procedures Requirements for the position of the CNC Operator: Demonstrated experience in CNC machining and/or a strong academic background in engineering, ideally supported by a recognised machining apprenticeship. Previous experience working with metal components. Ability to read and interpret engineering drawings. Proficient in conducting self-inspection of machined components using manual measurement tools. Desirables: Previous experience in CNC Grinding or EDM is advantageous but not essential. Experience within an Aerospace sector is advantageous. Positive attitude and a keenness to learn. Experience with CNC programme editing or basic G code adjustments. Strong attention to detail. Ability to work independently with minimal supervision Strong problem solving mindset. Please note:Sponsorship is not available. Applicants must have theRight to Work in the UK. TPBN1_UKTJ

Job Title: Quality Inspector Nights Location: Leicester Salary: up to £17.50 per hour Shift: Night shift - Monday to Thursday, 20:00 - 06:15 Benefits: On-site parking Pension Regular overtime opportunities About the Company: Our client is a leading tier-one component supplier, specialising in precision machining of mid-range cast iron parts such as sumps, flywheel housings, and flywheels. They are renowned for quality and reliability in the automotive supply chain. About the Role: We are seeking a skilled Quality Inspector Nights to join our night shift team. You'll ensure all components meet quality standards using automated and manual inspection methods, while supporting ISO 9001 and IATF 16949 compliance. Key Responsibilities: Operate CMM and automated measurement software Conduct dimensional inspections and interpret measurement reports Read and interpret engineering drawings and GD&T specifications Use hand tools (micrometers, calipers, height gauges) for manual measurement Document non-conforming parts and support root cause analysis Maintain records and update BIANCA Ensure QA compliance, including rejects, rework, and gauges Experience & Skills: Previous experience as a Quality Technician or Engineer preferred Strong attention to detail and ability to work independently on night shifts How to Apply: To apply for the Quality Inspector Nights position, click Apply Now and upload your CV. One of our qualified consultants will be in touch to discuss your application and next steps

Job Title: Quality Inspector / Level 2 NDT Technician (Night Shift) Location: Leicester Salary: £22.20 per hour (inclusive of shift allowance) Shift: Night Shift – Monday to Thursday, 18:00 – 06:00 Benefits: Permanent night shift, long weekends (4-day week), stable manufacturing environment, opportunity to work within a precision engineering business supplying highly regulated industries. Quality Inspector / Level 2 NDT Technician – Night Shift A well-established precision engineering manufacturer is seeking a Quality Inspector / Level 2 NDT Technician to join its quality team on a permanent night shift. This position plays a critical role in ensuring that manufactured components meet strict quality and compliance standards within a highly regulated production environment. The successful candidate will be responsible for inspection activities, non-destructive testing, and supporting quality assurance processes to maintain the highest product standards across production. Key Responsibilities Inspection Conduct First Article Inspection (FAI), receipt inspection, and in-process inspection using both CMM and manual measurement techniques Run CMM programmes, analyse results, and make appropriate quality decisions Maintain and manage CMM programme integrity and documentation Support internal non-conformance processes, including raising rejects and ensuring appropriate containment Work closely with the Engineering team during New Product Introduction (NPI) Complete FAIR packs using both CMM and manual inspection methods Carry out inspection and calibration activities as required to support productionNon-Destructive Testing (NDT) Perform MPI, DPI and visual inspections in line with approved procedures Ensure NDT equipment is maintained and suitable for operation Conduct required control checks and tests Interpret and evaluate results against defined acceptance standards Prepare and authorise product test reports Generate work instructions for Level 3 approval Manage inspection workflow to support production priorities Maintain Level 2 certification in the relevant NDT methodCandidate Requirements Minimum 5 years’ experience in a quality inspection role within aerospace or automotive manufacturing Level 2 NDT certification in Penetrant Inspection (DPI) Experience operating CMM equipment and manual inspection tools Strong understanding of FAIR documentation and quality standards Experience working with SOPs and controlled documentation Ability to work to production timelines in a manufacturing environmentApply If you are an experienced Quality Inspector with Level 2 NDT certification and are seeking a permanent night-shift opportunity in a precision engineering environment, we would welcome your application. Pertemps Engineering Division

Job Role: CNC Grinder Location: Leicester, LE18 Shift: 37-hour contract - 3 shift pattern (morning, afternoon and night rotation)* Pay Rate: £19 per hour including shift allowance *Training will be on a day shift Benefits: 26 days floating + 7 statutory days (this holiday entitlement increases after 10 years to 27 days) Company events Company pension Cycle to work scheme Employee discount Free parking On-site parking Sick pay Store discountSupplemental pay types: Bonus scheme Quarterly bonusAbout The Company: The company specialise in safety-critical environments, providing design, manufacturing, testing, obsolescence management, and maintenance/repair capabilities. About The Role: To operate CNC Machines (Grinding) in line with workload requirements, ensuring that all parts are machined to meet customer requirements and strict quality standards. Key Responsibilities: Operating CNC Grinding Machines, ensuring that parts are machined in accordance with the agreed method specification Attain machine setting skills to enable machine set ups Understanding of engineering drawings Inspecting parts in line with quality procedures and taking any necessary, approved, action to resolve quality issues Operating CMM machines to support inspection requirementAbout You: Previous experience in CNC Grinding is advantageous but not essential Previous experience in CNC machining is advantageous Experience within an Aerospace sector is advantageous Ability to read engineering drawings Able to self-inspect own parts using manual measuring equipmentHow to Apply: To apply for the CNC Grinder position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and next steps

Job Role: NDT Technician Level 2/Quality Inspector (Nights) Location: Leicester Salary: £53,564.16 per annum Metalis are working with an Aerospace manufacturer who are looking for an NDT Technician/Quality Inspector to join their team. Job Duties: Conduct 1st off inspection (CMM / Manual) / Receipt Inspection / Inspection and Calibration activities as required to support operations Completion of FAIR packs Perform inspections such as MPI, DPI and Visual Ensure equipment is maintained Carry out control checks and tests Evaluate test results against acceptance standards Ensure parts are processed in a timely manner Generate work instructions in preparation for Level 3 approval Job Requirements: 5 years' experience in the Aerospace/Automotive industry in a similar role Level 2 NDT Certificate in Penetrant Inspection Salary & Hours: £53,564.16 per annum Monday to Thursday, 6pm - 6am If this role is of interest to you, please apply with your CV

Shift Pattern: ?46.40 Hour Night Shift - 18.00 to 06.00 Monday - Thursday Salary:? £22.98 per hour (inclusive of shift allowance) Location: ?Bromford Precision Solutions Limited Leicester LE3 1UQ Opportunity Summary: We have a vacancy for a Setter/Operator CNC Miller. Role Accountabilities:? Use and control of CNC programsin accordance withrelevant procedures. Ability to read and understand CNC code to the levelrequiredfor machine set up and?operation. Understand all set up parameters and the effect that they have on the process, for example, datum setting and tool length and wear offsets. Set up machines with the required work holding and toolingin accordance withrelevant?procedures. Working as a team to maximise machine utilisation. Working to structured manufacturing plan. Responsible for setting andoperatinga 3-5 Axis CNC Milling/Turning Machines. Responsible for quality output. Responsible for Total Preventative Maintenance (TPM). Capable of using measuring equipment such asmicrometers, Vernier Callipers, Height Towers, Shadow Graphs, CMM etc. Person Specification: 5 years experience in the Aerospace/Automotive Industry in a similar role. Apprentice trained preferred ordemonstratedrelevant experience. Working to production timelines in a manufacturing environment. Working with SOPs and Company specific documentation. Self-driven, results orientated, with a positive outlook. Able to get on with others and be a team-player. Attention to detail and accuracyat all times. Working to deadlines. Managing workload effectively, prioritising where necessary. If you require any further information, please do not hesitate to contact the HR Department. You may have experience in:CNC Miller Nights, CNC Setter Operator, CNC Milling 3 Axis, CNC Milling 5 Axis, Night Shift CNC Jobs, CNC Machinist Leicester, CNC Jobs Leicester, Precision Engineering CNC, Aerospace CNC Machining, CNC Programmer Knowledge REF-227 509 TPBN1_UKTJ

Job Title: NDT Technician Location: Leicester Commutable from: Leicester, Loughborough, Hinckley, Coalville, Market Harborough Salary: £53,000 per annum Hours: Monday to Thursday 18:00 to 06:00 Benefits Permanent position Career progression opportunities Company events On-site parking Supportive and team-focused working environment About the Company A well-established and growing manufacturing business based in Leicester, supplying high-quality components to the aerospace and automotive sectors. The company offers a stable working environment with opportunities for long-term development. The Role We are recruiting for a Level 2 NDT Technician Night Shift to support inspection and quality processes within a busy manufacturing environment. Carry out CMM and manual inspections first off FAIR receipt Perform NDT inspections MPI DPI Visual Interpret results and complete inspection reports Support quality processes and production requirements Work closely with engineering and manufacturing teams About You Level 2 NDT certification Penetrant Inspection Previous experience in aerospace or automotive manufacturing Experience with CMM inspection Strong attention to detail and ability to meet deadlines How to Apply To apply for the Level 2 NDT Technician Night Shift position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and next steps

NDT Technician Rotating Day/Late/Night - Monday - Friday Salary: £19.17p/hr (£35.8k) Wigston (LE18) We are looking for an experienced NDT technician who knows their way around visual, dimensional & fluorescent penetrant inspection techniques. To join a busy and expanding aerospace company that is leading the way in Leicester. The main responsibilities for this role will have you carrying out visual, dimensional, airflow & fluorescent penetrant inspections on industrial & aerospace components, along with carrying out your standard inspections using micrometers, verniers, CMM operating etc. Rotating shift times Days (Mon to Thurs 05:45 – 13:45, Friday 05:45-10:45) Late (Mon to Thurs 13:45 – 21:45, Fridays 10:45 – 15:45) Night (Mon to Thursday 21:45 – 05:45, Friday 15:45 – 20:45) Your initial training is on fixed days (average 2 – 4 weeks), then moved to the rotating shift pattern. While training you will be on £15.84 then once on rotating pattern moved up to £19.17. What is needed from you? FPI certification either level 1 or level 2. Previous experience as an NDT inspector. Experience operating CMM machines & inspection equipment. Previous experience working to micron tolerances. What do you get out of this? Basic of £15.84 + 21% - £19.17p/hr (paid on all shifts) Enhanced rate for overtime Quarterly discretionary bonus. Proper benefits package. Social events 26 days holiday This permanent role is an amazing opportunity to join a global company specialising in the aerospace & industrial sectors. A company that actually wants to develop you and build you up more and more – This role is available due to expansion and more contracts coming on board If you have the skills and the knowledge to just walk in crack on and nail the job apply now. APPLY NOW - Applying is easy, and there are 2 ways to do it: Have you read the job advert and feel that you are the perfect person? If that's the case, then give Nathan Carlow a call at SolviT Recruitment NOW on (01455) 818999. Do you have experience but are not sure it's enough? Then reply to this advert with your CV, and we can tell you. #WeCanSolviT TPBN1_UKTJ

Job Title: Quality Inspector Shift: Day shift Pay: £14.50 - £16.50 per hour, depending on experience Location: Leicestershire, LE2 Benefits: Permanent position, employee discount scheme, death in service, company pension, company events. About the Company: A well-established manufacturing company who produce high quality machined and fabricated products. About the Role: Quality check parts at each stage of the process including first offs and final inspections. Use quality checking tools including mircometres, verniers, calipers etc. Record and file all test and audit reports.About You: Mechanical Engineering Background, knowledge of Steel standards and certifications would be beneficial. Capability to read Engineering Drawings. Basic IT Skills Willing to work in a team environment. Be familiar with calibration processes Previous experience in welding would be beneficial Familiar with ISO Standards and processes. Ability to perform first-off and final inspections of materials and processes, WIP and finished goods Determine product compliance to drawings, processes and technical specifications. Be familiar with established inspection procedures and have the capability to use inspection/testing tools and instruments, knowledge of CMM Equipment would be an advantage. Familiarity with Romer Absolute Faro Arm would be an advantage Identify and document nonconforming material in accordance with applicable procedures. Be happy to undertake ISO9001 internal audits if willing, training will be providedApply: To Apply for the Quality Inspector position, please submit an up to date CV and one of our Consultants will be in touch

CMM Inspector Location: Leicester, LE4 Hours: Monday to Thursday 20.00 - 06.15 am Payrate £16.50 - £17.25 p/h Interviews Happening Immediately Are you a skilled quality inspector / CMM inspector looking for your next opportunity? We're working with a well-established and growing engineering firm in Leicester who are looking to add to their friendly team. This role offers great rates of pay, steady Night shifts, and the opportunity to go permanent for the right person. What You'll Be Doing Operating a CMM Conducting first-offs, in-process and final inspections Reading and interpreting engineering drawings Conducting routine calibration tests recording and reporting data What We're Looking For Time-served Quality inspector Strong background in Quality inspection and CMM operation Confident in reading technical drawings 3+ years of experience working within a similar role Ability to use measuring equipment Someone who can hit the ground running and work on their own initiative Why You'll Love It Here Excellent hourly rate - up to £17.25 p/h Nigh shifts only Genuine temp-to-perm opportunity Great team environment and solid support from day one Interested? Let's talk! Call Stacey Catterall on (phone number removed) between 8 am - 5 pm to discuss your experience and the next steps. Or click "Apply Now" and we'll be in touch to chat through your CV. Ref: Quality Inspector INDTEMP

Manufacturing Engineer – NC/CMM Programmer (Machining) Location: BAE Systems Warton Contract: 12 months Working Pattern: 4–5 days on site per week Security Clearance: BPSS required, SC in Flight (UK Eyes Only, subject to ITAR) The Role We are seeking a Manufacturing Engineer – NC/CMM Programme

Excellent opportunity for an experiencedCMM Technician to join an establis. CMM TechnicianResponsible for performing and improving quality inspection processes of precision components.

CMM ProgrammerLocation: NewburySalary: £35,000 - £40,000 paJob type: PermanentOrion are currently supporting a manufacturing business in Newbury to find their new CMM Programmer to join the team! The role involves programming and operating CMM equipment to ensure all manufactured parts meet custom

New Role - Quality / CMM Inspector - TamworthAre you an experienced Quality Inspector / CMM Inspector? Jump on board with a company that not only gets your vibe but also gives you a cool place to work.

CMM Programmer Bathgate, ScotlandLocation: Bathgate, West LothianJob Type: Full-time, PermanentIndustry: Precision Engineering / ManufacturingAbout the RoleA leading engineering organisation is seeking an experienced CMM Programmer to join their inspection team.

Contract CMM Programmer - AerospaceLocation: Titchfield, Hampshire Contract Type: PAYE Contract - Inside of IR35 Industry: Aerospace & DefenceOverviewOur aerospace client in Titchfield is seeking an experienced CMM Programmer to join their team on a contract basis.

We are seeking an experienced CMM Programmer, with knowledge of LK metrology Camio software or PC-DMIS for a 6-month role in Worcestershire. This typically involves checking the CMM programs have the correct nominal/tolerances programm.

Job Title: CMM ProgrammerJob Type: PermanentSalary: Up to £40,000 p. Whats on offer for the CMM Programmer:33 days holiday (Inclusive of BHs)On-going training and development plansWorkwear provided. Due to continued growth Next Generation are recruiting for a CMM Programmer to work with a well-esta

Are you an experienced Quality Inspector with CMM experience looking for a role on a late shift?Do you enjoy working in a machine shop environment where precision and accuracy are critical?Were working with a specialist engineering business in Fareham who are looking to recruit a Quality Inspector t

Are you looking for a new and exciting challenge, with a forward thinking organisation within the high tech engineering sector? The Hyde Group are established industry experts and have vacancies for a CMM Inspector working in our manufacturing facility in Denton.

They are seeking an experiencedCMM Operatorto join their precision engineering team.

A multinational aerospace company is seeking a skilled Proof Inspector in the East Midlands.Responsibilities include conducting proof inspections on blades and fixtures while programming Coordinate Measuring Machines.The ideal candidate has experience with MCOSOMOS Mitutoyo software and Polyworks or

Programming, modifying and optimising CMM inspection routines across complex components. Familiarity with CMM software such as PC DMIS, Calypso, CAMIO or similar. You will join a rapidly growing aerospace manufacturer offering clear progression into a CMM Programming position.

Candidates must have completed an advanced engineering apprenticeship and have experience with CMM programming and CAD software.

A leading global technology firm in the UK is looking for a Service Engineer to provide high-quality technical support for their CMM product portfolio.

The role involves creating new programs to align a CMM machine, reviewing current programs for efficiency, and enhancing inspectors' understanding of CMM programming. A leading engineering firm based in Worcestershire is seeking an experienced CMM Programmer for a 6-month contract.

The Service Engineer is responsible for delivering high-quality technical support and services for Hexagon Metrology’s CMM product portfolio.

The Service Engineer is responsible for delivering high-quality technical support and services for Hexagon Metrology’s CMM product portfolio.

A leading engineering firm is seeking a Service Engineer to deliver high-quality technical support for their product portfolio.Responsibilities include equipment installation, maintenance, and customer interaction to ensure satisfaction.The ideal candidate has at least 4 years of industry experience

Experience working with CMM equipment is a must for this role also. Familiarity with Coordinate Measuring Machines (CMMs) is a strong advantage.

A well-established advanced manufacturing organisation is looking for a Metrology / CMM Engineer to optimize CMM processes and improve measurement capabilities. The candidate should have experience in aerospace or precision engineering, proficiency in CMM programming software like PC-DMIS, and a str

Maintain and calibrate CMM equipment to ensure measurement accuracy and reliability. Proven experience working as a CMM Programmer within a manufacturing or engineering environment. Strong proficiency in MCOSMOS CMM programming software.

The candidate will be responsible for programming CMM machines and creating calibration programs using Mitutoyo software.

A leading engineering and manufacturing organization based in Leamington Spa seeks an experienced CMM Programmer to join their high-precision environment. Responsibilities include developing CMM programs, performing dimensional inspections, and collaborating with engineering teams to enhance quality

A leading global company in manufacturing intelligence is seeking a Service Engineer to deliver high-quality technical support for their CMM product portfolio.

A cutting-edge aerospace firm in the UK seeks a Metrology Engineer to develop and execute metrology strategies.The successful candidate will implement measurement practices aligning with industry standards, lead inspections using advanced tools, and collaborate across teams to support continuous imp

A leading aerospace manufacturer in North Kesteven is seeking a CMM Technician Operator to support high-integrity inspection activities. The successful candidate will produce detailed inspection reports, optimize CMM inspection routines, and collaborate with engineering teams. This role offers signi

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 40-week sessional post i.To assist in the provision of a high quality cleaning service within Council buildings.Please download the Job Outline/Person S