Trabajos computer engineer en PortsmouthCrear alertas

Job Title: Electronics Design Engineer Location: Portsmouth Broad Oak We offer a range of flexible working arrangements – please speak to your recruiter about the options for this particular role Salary: Up to £43,000 (depending on skills and experience) Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. Role Description: The Electronic Design Engineer provides technical expertise in the electronic aspects of Underwater Systems hardware design, repair, and obsolescence. The role supports legacy products through the insertion of new technologies. The Electronic Design Engineer applies broad engineering knowledge, skills, and experience, working in line with established company approaches, techniques, and governance within the electronics domain. Core Duties: • Design and development of electronic assemblies, from specification through testing to release into service, • Support existing designs and implementation of technology insertion programmes including fault diagnosis and rectification, • Translation of requirements into detail design of electronic subsystems, • Component selection, electronic circuits schematic capture, and support to PCB layout, • Specification of electronic circuit components and bespoke items for procurement, • Interfacing with related disciplines including mechanical engineering, ILS, Safety, and Production, • HND or Degree in Electronic Engineering or equivalent practical experience, • Ability to work with PCB designers and support on PCB/circuit layout, • Experience of generating component level designs for introduction into volume production using computer-aided engineering, • Experience of various communications protocols such as RS422 is desirable As an Electronics Design Engineer you will undertake design and electrical integration in respect of legacy products and technology insertion. You will also be responsible for the design elements and obsolescence of the electrical aspects of the Spearfish Underwater System. As the world has evolved, so has the way we work. Our working approach, will enable you to have flexibility with your working hours, depending on your role and location. This could include accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date 10th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-Hybrid #LI-TP1

Software Developer (Azure & .NET) Portsmouth, Hampshire | 2 days per week on-site | Up to £60k per annum We’re working with an innovative client seeking an experienced Cloud Engineer with a strong background in Azure and .NET technologies. This role is ideal for someone who enjoys building scalable, secure cloud solutions and thrives in a collaborative, fast-paced environment. You’ll bring a solid foundation in modern development practices, cloud services, and a passion for continuous improvement, playing a key role in delivering high-quality, reliable systems. Skills & Experience Required: • Having a solid 5+ years working experience in Azure and .NET., • Hands-on experience with Azure Services like Azure Functions, App Services and API management., • Experience in programming languages such as C#, .NET and Python., • Experience creating and supporting CI/CD pipelines with GIT repository version control., • Experience working with SQL queries on databases like MSSQL, PostgreSQL and Oracle., • Solid understanding of cloud security practices and bringing best practices onboard., • Experience using Azure monitoring tools to ensure the health and performance of cloud solutions., • Strong problem-solving skills and a passion for building scalable cloud solutions., • A growth mindset, you’re always eager to learn and adapt to new technologies., • A team player who thrives in collaborative, fast-paced environments and can work independently when needed., • Excellent communication skills, able to explain complex technical concepts to stakeholders., • Bachelor’s degree (BSc Hons) in Computer Science, Software Engineering, IT, or related STEM discipline OR equivalent commercial experience, • Strong hands-on experience developing cloud-native applications in Microsoft Azure, • Microsoft Certified: Azure Developer Associate (AZ-204) or equivalent practical Azure development experience, • Understanding of secure coding practices and UK GDPR compliance Due to the volume of applications received for positions, it will not be possible to respond to all applications and only applicants who are considered suitable for interview will be contacted. Proactive Appointments Limited operates as an employment agency and employment business and is an equal opportunities organisation We take our obligations to protect your personal data very seriously. Any information provided to us will be processed as detailed in our Privacy Notice, a copy of which can be found on our website

This is an exciting opportunity for a System Engineer to work in the Technology & Telecoms industry, where you will play a critical role in maintaining and enhancing IT systems. HQ based in mainland Europe, but this permanent position based in Portsmouth offers a rewarding career for individuals passionate about technology and innovation. Client Details This is a permanent position with a well-established organisation in the Technology & Telecoms sector. The company has a reputation for delivering cutting-edge solutions and fostering innovation. As a medium-sized enterprise, it offers a professional yet collaborative environment. Description • Design, implement, and maintain IT systems to ensure optimal performance and reliability., • Monitor and troubleshoot system issues, providing timely resolutions to minimise downtime., • Collaborate with cross-functional teams to support technology initiatives and projects., • Conduct system upgrades and software updates to enhance functionality and security., • Develop and maintain system documentation and processes for continuity and compliance., • Evaluate and recommend new technologies to support organisational growth and efficiency., • Ensure the security and integrity of IT systems through regular audits and best practices. A successful System Engineer should have: • A strong educational background in computer science, information technology, or a related field., • Proven experience in system administration, network management, or a similar role., • Expertise in troubleshooting and resolving complex technical issues., • Proficiency in system design, implementation, and maintenance., • Knowledge of security protocols and best practices in IT systems., • Competitive salary ranging from £55,000 to £75,000 per annum., • Permanent role with career growth opportunities in the Technology & Telecoms industry., • Work in a professional and innovative environment based in Portsmouth

OT Security Engineer Utilities Hybrid: 2 days per week in Hampshire 6 months+ £650 per day In short: As our Operational Technology (OT) Engineer, you will have a critical role ensuring that interconnector OT system, networking and cyber assets maintain the highest level of operational performance and cyber security. In full: The Operations team are responsible for ensuring safe and efficient operational running of interconnectors 24/7/365. Key accountabilities: You will carry out various maintenance and inspection works within the Interconnector High Voltage Electricity Converter Station and control room environments. You will be working within a team, following safe systems of work, which is responsible for site systems, ensuring their good working order and security in line with business and regulatory requirements (notably the Network and Information Systems [NIS] Regulation) and frameworks. Key accountabilities include: • Carry out installation, refurbishment, maintenance, fault investigation/repair and condition monitoring across OT system, networking and cyber assets., • You will support new systems, networking or cyber implementations., • You will support in tender, procurement and design activities associated with new, • You will run routine activities such as system and patch updates, AV updates, backups and permission reviews on various frequencies - daily/weekly/monthly/annual., • Perform asset condition-based monitoring and system performance monitoring., • Perform both reactive and proactive maintenance on associated assets and systems., • Proactively work towards eliminating all accidents by adopting risk assessment techniques, method statements and being aware of potential hazards and reporting all near misses., • Carry out roles as defined in Safety Rules of 'Competent Person'., • Participation in a site call out rota on a periodic basis and support live incidents if they occur., • Assist in the management of 3rd parties undertaking planned and unplanned works safely and efficiently including ensuring risk assessment and method statements are in place, • On occasion, support the delivery of works and services across the Interconnectors Portfolio of IFA, IFA2, NSL and Viking Link sites., • Interpret and consult on central policy from the Cyber, Engineering, Assurance and Policy team and implement to your assigned interconnector and control rooms., • Ensure systems are managed in accordance with change and asset management lifecycles., • You will support the management spares and ensure they are tested, configured and deployable as required., • Work closely with the site and control room operations team to plan and test Incident Response Plans, • You will support and run response and recovery processes and procedures in isolation or with suppliers., • Support training the on-site and operator teams in relation to systems, procedures or security., • You will be crucial to the Backup and Restoration process, managing backups and recovery, • You will support and install HW & networking changes including testing, • Assist in the management physical and logical security controls relating to the cyber security of critical systems - for instance user permissions, port blocking, security system logic, CCTV coverage of core areas., • Support assurance, audit and inspection activities when undertaken., • Experience working with and/or knowledge on Operational Technology (including OT system, networking and cyber assets) such as control, protection, monitoring systems, HVAC, building management etc is highly desirable., • Ability to work unsupervised on a wide range of interconnector equipment as part of a fully integrated team but with occasional lone working, • Demonstrate a self-help approach to common work-related problems, • You will be computer literate, • Foundation knowledge and experience of key Health, Safety and Environmental and Occupier legislation applicable within an operational environment and premises (i.e. Health and Safety at Work Act, Management of Health and Safety at work Regulations, CDM Regulations, Electricity at Work Regulations, Occupier Liability Act, Temporary Works, • Competent Person authorisation or working towards, • Good communication skills with a "can do" attitude, • Ability to use an asset work management system like Ellipse/Maximo/Ultimo/IFS/etc is desirable We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.

JOB TITLE Electronic Warfare Engineer Salary depending on skills and experience. Location: Fareham, Hampshire UK JOB DESCRIPTION ESROE has vacancies in their small company of experts working in the area of Electronic Warfare, in particular, the area of Electronic Surveillance Measures (ESM) and Radar Identification. The successful applicant/s will be involved in the development of ESROE’s MicroESM system/s and associated software applications. The roles are varied and can be biased towards hardware or software development tasks depending on skills and experience. The hardware tasks require having general electronic engineering skills and firm radio frequency (RF) engineering knowledge or experience. Work may include bench and field testing of the current product, including the development of test signal generation and test environments plus analysis of the results achieved. Tasks may also involve work to support new ESM receiver products. Other key work, related to software, may include a variety of software development projects, investigations into current performances, further algorithm development, user interface design and development, data analysis, writing software documentation, preparation of releases for customers, system testing and customer support. There is also the potential to work on some of ESROE’s other key products, that of its artificial intelligence software for radar classification and for radar identification performance analysis. There is the opportunity for short trips away in the UK and abroad with the team participating in hardware and software trials and demonstrations. ESROE are looking for someone who is driven, creative, has strong mathematical skills, has exceptional attention to detail, has excellent team working skills and can also confidently work independently. Our working environment is friendly, hard-working and inspiring. Currently being a small company, there is the potential for you to be a significant part of it. Work is based in our spacious open plan modern ground floor office. This role is not suitable for remote or hybrid working. Due to the nature of this position, we require you to have, or be willing and eligible to achieve SC clearance. The work requires you to be a Sole UK National. Essential: · You must have an excellent honours degree in a relevant subject such as Electronic Engineering, Computer Science, Physics, Mathematics or similar. · You must have studied, or have practical/industry experience of software development. · You must have a strong interest in Defence Technology. · You must have a strong interest in gaining good knowledge of ESM, its software and hardware. · You must have a strong desire to work in a small company. · You must have excellent ability to learn new skills with minimal supervision. · You must have the ability to be persistent and thorough in investigative tasks. HOW TO APPLY Please email to request our initial questionnaire for applicants. Quote job reference ESROE2026R. Note that applications will only be considered on completion and return of our questionnaire.

OT Security Engineer Utilities Hybrid: 2 days per week in Hampshire 6 months+ £650 per day In short: As our Operational Technology (OT) Engineer, you will have a critical role ensuring that interconnector OT system, networking and cyber assets maintain the highest level of operational performance and cyber security. In full: The Operations team are responsible for ensuring safe and efficient operational running of interconnectors 24/7/365. Key accountabilities: You will carry out various maintenance and inspection works within the Interconnector High Voltage Electricity Converter Station and control room environments. You will be working within a team, following safe systems of work, which is responsible for site systems, ensuring their good working order and security in line with business and regulatory requirements (notably the Network and Information Systems [NIS] Regulation) and frameworks. Key accountabilities include: • Carry out installation, refurbishment, maintenance, fault investigation/repair and condition monitoring across OT system, networking and cyber assets., • You will support new systems, networking or cyber implementations., • You will support in tender, procurement and design activities associated with new, • You will run routine activities such as system and patch updates, AV updates, backups and permission reviews on various frequencies - daily/weekly/monthly/annual., • Perform asset condition-based monitoring and system performance monitoring., • Perform both reactive and proactive maintenance on associated assets and systems., • Proactively work towards eliminating all accidents by adopting risk assessment techniques, method statements and being aware of potential hazards and reporting all near misses., • Carry out roles as defined in Safety Rules of ‘Competent Person’., • Participation in a site call out rota on a periodic basis and support live incidents if they occur., • Assist in the management of 3rd parties undertaking planned and unplanned works safely and efficiently including ensuring risk assessment and method statements are in place, • On occasion, support the delivery of works and services across the Interconnectors Portfolio of IFA, IFA2, NSL and Viking Link sites., • Interpret and consult on central policy from the Cyber, Engineering, Assurance and Policy team and implement to your assigned interconnector and control rooms., • Ensure systems are managed in accordance with change and asset management lifecycles., • You will support the management spares and ensure they are tested, configured and deployable as required., • Work closely with the site and control room operations team to plan and test Incident Response Plans, • You will support and run response and recovery processes and procedures in isolation or with suppliers., • Support training the on-site and operator teams in relation to systems, procedures or security., • You will be crucial to the Backup and Restoration process, managing backups and recovery, • You will support and install HW & networking changes including testing, • Assist in the management physical and logical security controls relating to the cyber security of critical systems – for instance user permissions, port blocking, security system logic, CCTV coverage of core areas., • Support assurance, audit and inspection activities when undertaken., • Undertake compliance activities to key regulatory requirements, including compliance reporting in collaboration with other Subject Matter Experts. Knowledge / Experience: • Experience working with and/or knowledge on Operational Technology (including OT system, networking and cyber assets) such as control, protection, monitoring systems, HVAC, building management etc is highly desirable., • Ability to work unsupervised on a wide range of interconnector equipment as part of a fully integrated team but with occasional lone working, • Demonstrate a self-help approach to common work-related problems, • You will be computer literate, • Foundation knowledge and experience of key Health, Safety and Environmental and Occupier legislation applicable within an operational environment and premises (i.e. Health and Safety at Work Act, Management of Health and Safety at work Regulations, CDM Regulations, Electricity at Work Regulations, Occupier Liability Act, Temporary Works, • Competent Person authorisation or working towards, • Good communication skills with a “can do” attitude, • Ability to use an asset work management system like Ellipse/Maximo/Ultimo/IFS/etc is desirable, • Understanding of relevant regulatory requirements (such as the Networks and Information Systems Regulation [NIS]) is beneficial but not essential Candidates will ideally show evidence of the above in their CV in order to be considered. Please be advised if you haven't heard from us within 48 hours then unfortunately your application has not been successful on this occasion, we may however keep your details on file for any suitable future vacancies and contact you accordingly. Pontoon is an employment consultancy and operates as an equal opportunities employer. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.

Full‑Stack Software Engineer (React & ASP.NET / C#) We're looking for a Full‑Stack Software Engineer to join a growing development team building modern, business‑critical web applications. This role suits someone who enjoys working across the full stack and takes pride in owning features from initial concept through to deployment. You'll be involved in both front‑end and back‑end development, working closely with other engineers, product owners, and stakeholders to deliver clean, scalable, and user‑focused solutions. What you'll be doing Designing and building front‑end web applications using React Developing and maintaining back‑end services and web applications using ASP.NET and C# Working across the full stack, contributing to both UI and API development Building and consuming RESTful APIs Writing clean, well‑structured, and maintainable code Collaborating with the wider team to refine requirements and technical solutions Troubleshooting issues, improving performance, and fixing bugs Supporting the ongoing improvement of development standards, tooling, and ways of working Taking ownership of features and delivering them end to end What we're looking for Strong commercial experience with React for front‑end development Solid back‑end experience using ASP.NET and C# Proven experience working in a full‑stack role (not purely front end or purely back end) Good understanding of modern web application architecture Experience building and working with APIs Comfortable working in a collaborative, agile environment Able to communicate clearly with both technical and non‑technical colleagues A pragmatic approach to problem‑solving and delivery Nice to have Experience working with cloud environments Exposure to CI/CD pipelines Knowledge of modern testing practices Experience working on scalable or high‑availability systems Why consider this role? Genuine full‑stack work with balanced exposure across front end and back end Opportunity to work on real, production systems rather than greenfield demos only A collaborative team environment with scope to influence technical decisions Room to grow technically and professionally as the team and systems evolveIf you enjoy building complete web solutions and want a role where you can see the direct impact of your work, this is a strong opportunity to develop your full‑stack skillset further. To find out more about Computer Futures please visit Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC(phone number removed) England and Wales

JOB PURPOSE: To be responsible for supporting engineering aspects of the procurement, safety management, and bringing into service of relevant ATC Systems. Typically, these will be minor / less complex systems and projects, focusing on simpler systems or specific equipment. May be required to undertake Engineering Authority roles in supporting relevant ATC Systems through the entire equipment life cycle. This System Engineer position will be working in our Primary Surveillance Radar (PSR) and Secondary Surveillance Radar (SSR) team, so knowledge of these systems is desirable. PRINCIPAL ACCOUNTABILITIES: Project Delivery Negotiate and coordinate project requirements and timelines with stakeholders. Produce technical specifications for minor systems and support major system specifications. Support production of engineering estimates for project bids. Advise and assist with tender evaluations and assess technical solutions. Contribute to project planning in line with delivery milestones. Act as Change Lead for minor projects, ensuring change assurance activities are completed. Manage day-to-day project activities including installation and commissioning. Perform acceptance testing and produce test reports. Produce and review maintenance and operating procedures. Ensure engineering deliverables are met according to the project plan. Undertake the Engineering Authority (EA) role for designated systems. Prepare and maintain support documentation for allocated equipment and systems. Respond to customer technical enquiries and manage Corrective Action Requests. Monitor operational systems and conduct investigations into issues and faults. Plan and implement modifications to correct issues and faults with minimal disruption. Maintain awareness of industry developments affecting airport systems. Team leadership and resource management Manage direct reports within the section. Allocate team resources to projects and activities. Ensure team competency and identify training needs. Review performance of direct reports periodically. Identify and support development needs of team members. AUTONOMY: As directed by their line manager, commits resources within their direct control to achieve project deliverables within agreed financial limits. Assists in identifying the strategic aims of assigned projects and works tactically to deliver agreed customer solutions. As Engineering Authority will pro-actively recommend activities and resources required to address asset support issues. Responsible for up to 3 direct reports. Plays a co-ordinating role for subcontractors. SCOPE OF JOB: The post holder is required to contribute to delivery of multiple projects at any one time involving different project teams and locations. They may also be required to fulfil an EA role. The post holder is expected to resolve conflicting demands on their time and their direct reports, in consultation with their line management. There is little requirement for strategic planning in this post. However, the post holder is likely to play a role in advising managers on issues which may affect strategy. The post holder may be called on to advise and assist operational engineers to restore equipment into service. In support of this the post holder may be asked to attend airport sites at short notice. Where required, and where agreed, the post holder will deliver structured training and / or carry out structured Competency Assessment Checks within their field of expertise and in accordance with NATS procedures. The post holder will be required to undertake tasks within an operational environment therefore will need to demonstrate suitable behaviours. The post holder may be required to provide out of hours on-call support for specific systems as designated by the Head of section. EXPERIENCE, QUALIFICATIONS & SKILLS: Professional engineering qualification to Higher National Certificate (Level 4 or SQF Level 7) as a minimum Electronics, Telecommunications or Computer Science or other relevant Engineering qualification discipline. In lieu of the above qualifications the candidate will be required to demonstrate one of the following alternative criteria: Relevant lower-level engineering qualifications such as an Apprenticeship coupled with demonstrable engineering experience in a relevant field (May include but not limited to: RAF, Navy, Rail, other Safety Critical environment). Evidence of substantial experience gained in a relevant transferable environment (such as ATSEP) gained over a significant period. Experience of supporting systems and equipment similar to those used by ANSP's such as RAF, Navy, Rail, other Safety Critical environment and experience in maintenance engineering on this type of equipment. Shall demonstrate an understanding of safety critical systems and the impact they may have within our operational environment. The post holder shall be able to demonstrate - Works well as part of a team. Communicates difficult technical and / or operational concepts clearly and concisely, both verbally and in writing. Applies a calm, methodical, analytical and systematic approach to define/resolve complex incidents and dynamic risk management. Interprets and effectively communicates technical information into business language and vice versa. Can undertake a range of work, sometimes complex and non-routine, in a variety of environments. Plans, schedules and monitor work progress of (and that of others where applicable) competently within limited deadlines. A strong understanding of the system types used in the relevant technical domain and how they are used in operation. Good interpersonal skills with the ability to negotiate tactfully yet firmly with customers, suppliers and other stakeholders. Commitment to continuous professional development, both technical and personal. Skilled in the use of IT systems for professional documentation production and for project management. Willingness to learn, develop and take on different tasks under the guidance of their line manager. It is desirable for the post holder to have - A good understanding and experience of relevant Air Traffic Management (ATM) legislation, standards and procedures. Completed Air Traffic equipment training such as ATSEP and OEM training courses. A good understanding of Air Traffic Control practices and procedures. A wide knowledge of the equipment and techniques used in providing all aspects of ATM at airports. A passion for Safety and Air Traffic Management. Technical Expertise in Surveillance Systems (Desirable) - Strong theoretical and practical knowledge of Primary Surveillance Radar (PSR) and Secondary Surveillance Radar (SSR) sensors. Hands‑on experience in sensor operation, including installation, data integration, and networking, and subsequent fault finding. Demonstrated experience in radar modelling, simulation, and confirming real‑world performance through rigorous testing (including dedicated flight trials and Target of Opportunity analysis) Strong grounding in RF engineering, including Radar antenna, transmitter and receiver characteristics. ADDITIONAL INFORMATION: The ideal candidate may be required to attend other NATS sites. We are proud to offer a fantastic total reward package to help you thrive both personally and professionally - for more information on what NATS can offer you please visit - Why NATS? We have adopted agile working to provide greater flexibility and increased choice over working arrangements, with the opportunity for this role to work in our modern office facilities as well as remotely. We also welcome discussions on flexible and part-time working arrangements. Find out more here. If you share our passion to advance aviation and keep the skies safe - we would like to hear from you whatever your age, sex, race, faith, sexual orientation, gender identity, gender expression, visible or invisible disability. Individuals that bring different perspectives, skills, life experiences and backgrounds help us be at the forefront of our industry

Junior Software Engineer Location: Office based, Whiteley PO15 7AF Salary: Competitive, depending on experience Contract: Full Time, Permanent Benefits: 27 days holiday (increasing 1 day each year), Flexible working hours, Share options, Company pension, Cycle to Work Scheme, Private Dental care About the company: iFAST Diagnostics is a medical device company that has developed a game-changing, rapid antimicrobial susceptibility test, that will enable the right antibiotic treatment for all patients with bacterial infections. Currently, these tests take 48-72 hours, but iFAST's tests are 10x faster giving full quantitative and qualitative results in under 3 hours from a positive blood culture or bacterial isolate. Job Role: We are seeking a Software Engineer or Computer Scientist to join our team as we roll out our instruments in the UK, having just received our UKCA approval for the first product. You will design, implement and test a variety of software including middleware, firmware and algorithm development which are integral to our novel medical diagnostic product Responsibilities: Development of software for our current and future instruments, including algorithm development, processing code and middleware. Writing code and algorithms in accordance with good Software practise - Experience of relevant standards and medical device regulations would be beneficial (e.g. ISO 13485, ISO 9001 ISO 14971 and IEC 62304.) Development of test plans and procedures, conducting and accurately documenting the tests at unit, sub-system and system level. Working closely with internal and external stakeholders e.g. production, service, sales teams and suppliers. Knowledge, Skills & Experience: Have experience of software development for medical devices or similar within an ISO regulated environment and be able to work to associated regulations such as IEC 62304. Be able to work efficiently with source code management tools. Be familiar with IEC 62304 compliant software development processes and standards to produce well documented, maintainable, and test-driven code. Understand machine learning concepts and be able to choose appropriate techniques for a given task and dataset, including supervised learning. Have a strong mathematical and statistical background and be able to apply this to algorithm development. Have experience of writing software for controlling electromechanical equipment, ideally in C/C++, Python, MATLAB or PLC code. Hold a (first or 2:1) degree in a relevant discipline. Need to be able to work under minimal supervision with a flexible attitude and be capable of solving problems and working to an agreed timescale to deliver on your projects. If you feel you have the necessary skills and experience to be successful in this role, click on APPLY today, forwarding an up-to-date copy of your CV for consideration in the first instance. No agencies please. TPBN1_UKTJ

JOB PURPOSE: To be responsible for supporting engineering aspects of the procurement, safety management, and bringing into service of relevant ATC Systems. Typically, these will be minor / less complex systems and projects, focusing on simpler systems or specific equipment. May be required to undertake Engineering Authority roles in supporting relevant ATC Systems through the entire equipment life cycle. This System Engineer position will be working in our Primary Surveillance Radar (PSR) and Secondary Surveillance Radar (SSR) team, so knowledge of these systems is desirable. PRINCIPAL ACCOUNTABILITIES: Project Delivery Negotiate and coordinate project requirements and timelines with stakeholders. Produce technical specifications for minor systems and support major system specifications. Support production of engineering estimates for project bids. Advise and assist with tender evaluations and assess technical solutions. Contribute to project planning in line with delivery milestones. Act as Change Lead for minor projects, ensuring change assurance activities are completed. Manage day-to-day project activities including installation and commissioning. Perform acceptance testing and produce test reports. Produce and review maintenance and operating procedures. Ensure engineering deliverables are met according to the project plan. Undertake the Engineering Authority (EA) role for designated systems. Prepare and maintain support documentation for allocated equipment and systems. Respond to customer technical enquiries and manage Corrective Action Requests. Monitor operational systems and conduct investigations into issues and faults. Plan and implement modifications to correct issues and faults with minimal disruption. Maintain awareness of industry developments affecting airport systems. Team leadership and resource management Manage direct reports within the section. Allocate team resources to projects and activities. Ensure team competency and identify training needs. Review performance of direct reports periodically. Identify and support development needs of team members. AUTONOMY: As directed by their line manager, commits resources within their direct control to achieve project deliverables within agreed financial limits. Assists in identifying the strategic aims of assigned projects and works tactically to deliver agreed customer solutions. As Engineering Authority will pro-actively recommend activities and resources required to address asset support issues. Responsible for up to 3 direct reports. Plays a co-ordinating role for subcontractors. SCOPE OF JOB: The post holder is required to contribute to delivery of multiple projects at any one time involving different project teams and locations. They may also be required to fulfil an EA role. The post holder is expected to resolve conflicting demands on their time and their direct reports, in consultation with their line management. There is little requirement for strategic planning in this post. However, the post holder is likely to play a role in advising managers on issues which may affect strategy. The post holder may be called on to advise and assist operational engineers to restore equipment into service. In support of this the post holder may be asked to attend airport sites at short notice. Where required, and where agreed, the post holder will deliver structured training and / or carry out structured Competency Assessment Checks within their field of expertise and in accordance with NATS procedures. The post holder will be required to undertake tasks within an operational environment therefore will need to demonstrate suitable behaviours. The post holder may be required to provide out of hours on-call support for specific systems as designated by the Head of section. EXPERIENCE, QUALIFICATIONS & SKILLS: Professional engineering qualification to Higher National Certificate (Level 4 or SQF Level 7) as a minimum Electronics, Telecommunications or Computer Science or other relevant Engineering qualification discipline. In lieu of the above qualifications the candidate will be required to demonstrate one of the following alternative criteria: Relevant lower-level engineering qualifications such as an Apprenticeship coupled with demonstrable engineering experience in a relevant field (May include but not limited to: RAF, Navy, Rail, other Safety Critical environment). Evidence of substantial experience gained in a relevant transferable environment (such as ATSEP) gained over a significant period. Experience of supporting systems and equipment similar to those used by ANSP's such as RAF, Navy, Rail, other Safety Critical environment and experience in maintenance engineering on this type of equipment. Shall demonstrate an understanding of safety critical systems and the impact they may have within our operational environment. The post holder shall be able to demonstrate - Works well as part of a team. Communicates difficult technical and / or operational concepts clearly and concisely, both verbally and in writing. Applies a calm, methodical, analytical and systematic approach to define/resolve complex incidents and dynamic risk management. Interprets and effectively communicates technical information into business language and vice versa. Can undertake a range of work, sometimes complex and non-routine, in a variety of environments. Plans, schedules and monitor work progress of (and that of others where applicable) competently within limited deadlines. A strong understanding of the system types used in the relevant technical domain and how they are used in operation. Good interpersonal skills with the ability to negotiate tactfully yet firmly with customers, suppliers and other stakeholders. Commitment to continuous professional development, both technical and personal. Skilled in the use of IT systems for professional documentation production and for project management. Willingness to learn, develop and take on different tasks under the guidance of their line manager. It is desirable for the post holder to have - A good understanding and experience of relevant Air Traffic Management (ATM) legislation, standards and procedures. Completed Air Traffic equipment training such as ATSEP and OEM training courses. A good understanding of Air Traffic Control practices and procedures. A wide knowledge of the equipment and techniques used in providing all aspects of ATM at airports. A passion for Safety and Air Traffic Management. Technical Expertise in Surveillance Systems (Desirable) - Strong theoretical and practical knowledge of Primary Surveillance Radar (PSR) and Secondary Surveillance Radar (SSR) sensors. Hands-on experience in sensor operation, including installation, data integration, and networking, and subsequent fault finding. Demonstrated experience in radar modelling, simulation, and confirming real-world performance through rigorous testing (including dedicated flight trials and Target of Opportunity analysis) Strong grounding in RF engineering, including Radar antenna, transmitter and receiver characteristics. ADDITIONAL INFORMATION: The ideal candidate may be required to attend other NATS sites. We are proud to offer a fantastic total reward package to help you thrive both personally and professionally - for more information on what NATS can offer you please visit - Why NATS? We have adopted agile working to provide greater flexibility and increased choice over working arrangements, with the opportunity for this role to work in our modern office facilities as well as remotely. We also welcome discussions on flexible and part-time working arrangements. Find out more here. If you share our passion to advance aviation and keep the skies safe - we would like to hear from you whatever your age, sex, race, faith, sexual orientation, gender identity, gender expression, visible or invisible disability. Individuals that bring different perspectives, skills, life experiences and backgrounds help us be at the forefront of our industry. TPBN1_UKTJ

TÜV SÜD – A global leader in the field of testing, inspection, management system certification and product certification renowned for quality, integrity and technical excellence. Established more than 150 years ago in Germany, TÜV SÜD is a leading global provider of technical services with more than 28,000 highly skilled employees across 1,000 offices worldwide. TÜV SÜD offers a wide range of testing & product certification, inspection, auditing & system certification, training and knowledge services. We are a premium quality, safety, and sustainability solutions provider. Our team of EMC focused Technicians or Engineers deliver a comprehensive EMC testing service for new and innovative technology and devices from a wide range of industries. The Technician or Engineer will take ownership of the set up and completion of EMC test projects and the accurate delivery of results to customers. This is a great opportunity to join a global, well respected organisation and develop your technical skills and experience, building a great career in engineering. Initial training will be delivered on a shift pattern of Monday-Friday, 37 hours per hour, 8:30am-5:00pm before transferring to the shift rotation after training. The successful candidate will rotate between the shift pattern below every two weeks. * Shift 1: Monday to Thursday: 8am – 4:30pm with a 1-hour lunch break. Friday: 8am – 4pm with a 1-hour lunch break * Shift 2: Monday to Thursday: 4pm – 12:30am with a 1 hour break. Friday: 4pm – 12am with a 1-hour break. Main Duties and Responsibilities: * Work closely with customers, Engineers and Project Managers to provide EMC testing in both screened enclosure and in-situ environments. * Provide support to customers in advance of, or during, the test programme, particularly communicating issues during any failure phase of their EMC test programme. * Maintain data and electronic logbooks for testing * Test procedure generation including provision of photos and measurement uncertainty calculations. * Develop test plans (where required) and generate test reports. * Contribute to test equipment / method development and evaluation. * Support the validation of clients’ requirements (which may require site visits). * Offer assistance to the sales team with the provision of technical information to enable quote generation. * Develop as specialist in a specific area of testing i.e. rail, marine, radio EMC requirements, etc. * Provision of training to engineers regarding specialist area. Essential criteria: * Experience as an EMC Test Engineer in a test house environment with demonstrable knowledge and understanding of the EMC Directive and/or relevant EMC test standards. * Experience of using test equipment such as a spectrum/network analyser, oscilloscope, signal generator or RF power meter. * Strong written and verbal English communication skills - this role involves direct customer communication and therefore a good level of English fluency is required. * Self-driven with an enthusiastic approach and willingness to learn/develop technical skills. * Willing to work overtime and shiftwork as and when required * Computer literate with good IT skills, particularly using Microsoft Word, Excel, Outlook and bespoke test systems. * Comfortable to be customer facing. Further Information: TÜV SÜD in the UK offers a competitive salary and benefits package that includes a minimum of 33 days holiday entitlement (for full-time employees, including public holidays), a contributory Group Personal Pension Plan and a non-contributory Group Life Assurance Scheme. We also offer various Salary Exchange/Sacrifice schemes (buying/selling holiday, cycle to work scheme, pensions), incentive schemes and comprehensive wellbeing support (Employee Assistance Programme, Dental Scheme and Occupational Health services). Dependent on their role, employees may also be eligible for hybrid/permanent home-working, a Company Car/Car Allowance and Private Medical Insurance. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD

We are looking for a Mid-Level Computer Vision/Deep Learning Engineer to join our team. Computer Vision Foundations: Strong working knowledge of standard CV libraries (OpenCV, scikit-image, PIL) and classical CV algorithms (edge detection, thresholding, color spaces). In this role, you won't just be

Senior Computer Vision / Applied ML Engineer. Senior Computer Vision / Applied ML Engineer. Computer Vision, Machine Learning, Robotics, Mathematics, Physics, or similar).

We are hiring a founding computer vision engineer. Significant hands-on experience building deployed computer vision pipelines. Serious personal engineering projects outside work or university.

Ideal candidates should have experience in Go programming and Python, with knowledge in areas such as Computer Vision and Docker.

Staff-Level Full-Stack Software Engineer.

Proov is looking for a Computer Vision Research Engineer to join our Biometric Platform team in Greater London. Candidates should excel in Machine Learning, Computer Vision, and Python, and enjoy working in cross-functional teams.

Bachelor's degree in Software Engineering, Computer Science, or a comparable field. Robotic Vision Application Software Engineer. We are seeking a driven Software Engineer to help pioneer new developments in robotic vision and controls technology—a strong proficiency in C+ development is essential

A leading recruitment agency in Portsmouth is looking for a Full‑Stack Software Engineer to join their development team.

Sr Research Engineer, Computer Vision page is loaded## Sr Research Engineer, Computer Visionlocations: London, GBR: Toronto, ON, CANtime type: Full timeposted on: Posted Todayjob requisition id: 26WD96331**Job Requisition ID #26WD96331Senior Software Engineer, Computer Vision & Multimo

Full‑Stack Software Engineer (React & ASP. We're looking for a Full‑Stack Software Engineer to join a growing development team building modern, business‑critical web applications. You’ll be involved in both front‑end and back‑end development, working closely with other engineers, product

A software development company is seeking a Full-Stack Software Engineer to join their development team in Portsmouth.

Work closely with piping, mechanical, civil, process, and safety engineering teams. Engage with stakeholders, including clients, regulators, and construction teams, ensuring a clear understanding of stress engineering requirements. A leading engineering organisation is seeking an experienced.

Computer Futures is looking for a Power Electronics Engineer for a 6-month contract located in the West Midlands, United Kingdom. The role involves supporting the design and testing of DC-DC conversion stages for a power electronics module, as well as providing technical guidance to mechanical and P

This full-time Computer Vision Engineer position is based onsite in our brand-new Ultralytics office in London, UK. As a Computer Vision Engineer at Ultralytics, you will be at the forefront of developing and refining our world-class, open-source AI models. Developing, training, and optimizing state

Degree‑qualified in Electronics, Software Engineering, Computer Science, or a related discipline. Office‑based engineering environment. Senior Embedded Software/Firmware Engineer.

A technology consultancy in the United Kingdom is seeking a Test Engineer / Lab & Systems Support Engineer to maintain a critical test and lab environment. Candidates with various backgrounds, including graduates in engineering or IT, are encouraged to apply.

Candidates should have strong Embedded C programming skills, a degree in Engineering or a related field, and at least 5 years of experience in embedded software development. A technology recruitment firm seeks a Senior Embedded Software Engineer in the United Kingdom.

Computer Futures / SThree Group is looking for a skilled Design Engineer to join their Embedded Systems department in the United Kingdom. Ideal candidates possess a degree in Electronic Engineering, over 5 years of experience, and proficiency with tools like Altium and ORCAD.

Provide technical guidance to mechanical and PCB design engineers developing an integrated power electronics unit, combining PFC and DC‑DC stages into a compact, robust, and manufacturable solution. An exciting new contract opportunity for a Power Electronics Engineer on a 6 months contract, Outsi

The Design Engineer will be responsible for the design, development, and enhancement of electronic security products. Degree in Electronic Engineering or related discipline.

Full‑Stack Software Engineer (React & ASP. We're looking for a Full‑Stack Software Engineer to join a growing development team building modern, business‑critical web applications. You'll be involved in both front‑end and back‑end development, working closely with other engineers, product o

An engineering consultancy in the UK is offering a 1-year placement aimed at Master's students in AI, ML, or related fields.

Proov is looking for a Computer Vision Research Engineer to join our Biometric Platform team.

A leading software company is seeking a Senior Software Engineer specializing in Computer Vision and Multimodal AI.

Computer Vision Research Engineer. Proov is looking for a Computer Vision Research Engineer to join our Biometric Platform team. Computer Vision Research Engineer (Biometric Platform) at iProov.

We are looking for an experienced Computer- to-Plate (CTP) Service Engineer to work on specialist prepress and imaging systems, supporting customers across the UK. This role would suit an experienced CTP or prepress engineer looking for a long‑term, stable field position. Previous experience as a

You possess a deep understanding of State-of-the-Art Computer Vision/AI approaches and feel confident applying both machine learning and classical computer vision techniques to real-world problems. We are seeking a visionary Computer Vision (CV) Specialist to lead our most ambitious AI initiatives w

AI, based in the UK, is seeking a Mid-Level Computer Vision/Deep Learning Engineer to design and deploy cutting-edge ML models for personalized skincare solutions.

Coursework or projects in computer vision, ML, or signal processing.

A leading software company is hiring a Senior Software Engineer focused on Computer Vision and Multimodal AI to develop robust systems for perception and understanding.

A leading engineering organization is seeking an experienced Piping Stress Engineer to support a major nuclear civil decommissioning programme.

VivaCity is seeking an experienced Computer Vision Engineer to develop AI-driven traffic sensor systems in London.

LA International Computer Consultants Ltd.