Control engineer jobs in Newcastle Upon TyneCreate job alerts

Job Title: Maintenance Engineer Location: North East England (multi-site, field-based) Salary: £36K DoE Contract Type: Full-time, shift-based (including standby and call-out duties) About the Role We are seeking a skilled and proactive Maintenance Engineer to support the maintenance and operation across multiple different machines and systems. Working on a shift roster, you will be responsible for maintaining a wide range of equipment and associated ICT infrastructure. The role combines hands-on engineering with remote diagnostics to ensure high system availability and performance. Key Responsibilities • Diagnose, repair, and maintain equipment to agreed performance standards, • Respond to incidents and service requests, ensuring rapid resolution and minimal disruption, • Monitor system performance and identify trends to improve reliability and efficiency, • Support major incident response and contribute to root cause analysis, • Carry out installation, configuration, and testing of hardware and software systems, • Maintain accurate records, asset data, and technical documentation, • Contribute to continuous improvement initiatives and engineering developments, • Ensure compliance with health & safety, data security, and operational procedures, • Provide technical updates and liaise with control teams and stakeholders, • Experience in maintenance, fault-finding, and repair of electronic or ICT-based systems, • 18th Edition IET Wiring Regulations (BS 7671:2018), • Strong problem-solving skills with the ability to work independently, • Knowledge of networking, hardware systems, or payment systems (desirable), • Ability to work in a field-based role, often as a lone worker, • Good communication and documentation skills, • Full UK driving licence (company vehicle provided), • Ability to handle sensitive equipment and follow strict security procedures, • Competitive salary and shift allowances, • Company vehicle for work use, • Ongoing training and development opportunities You are a self-motivated engineer or technician who thrives in a fast-paced environment. You take pride in delivering high-quality work, solving complex problems, and ensuring essential systems remain operational for thousands of daily users. Sellick Partnership is proud to be an inclusive and accessible recruitment business and we support applications from candidates of all backgrounds and circumstances. Please note, our advertisements use years' experience, hourly rates, and salary levels purely as a guide and we assess applications based on the experience and skills evidenced on the CV. For information on how your personal details may be used by Sellick Partnership, please review our data processing notice on our website.

PRINCIPAL DEVOPS ENGINEER- SC CLEARED PRINCIPAL DEVOPS ENGINEER- Permanent opportunity for a Principal DevOps Engineer with SC Clearance. - Salary up to £105,000 DOE - Hybrid opportunity with Newcastle based offices - To apply, please call Laura Jackson on , or email with an up-to-date CV. WHO ARE WE?We're hiring for DevOps Engineers at principal level to join a top consultancy delivering cutting-edge solutions for industry-leading Public Sector and Defence clients. You'll have the opportunity to work across multiple high-impact, innovative and mission-critical projects, shaping solutions that make a real difference. Due to the sensitive nature of the work, an SC Clearance eligibility is required. THE PRINCIPAL DEVOPS ENGINEER- Active SC Clearance or SC Clearance eligibility - Newcastle Based or ability to travel to Newcastle.- Experience as in a Senior/ Principal DevOps/ Platform engineering role PRINCIPAL DEVOPS ENGINEER ESSENTIAL SKILLS- Strong Linux expertise (RHEL/CentOS) with experience supporting production systems- Git for version control and collaborative development (GitHub / GitLab)- AWS cloud infrastructure, ideally with Infrastructure as Code using Terraform- Kubernetes and container technologies (Docker) for modern platform environments- Experience working with CI/CD pipelines and automation tooling (e.g. Jenkins, Bamboo)- Strong understanding of modern platform architecture, microservices and cloud-native systems- Good communication skills and ability to provide technical leadership. TO BE CONSIDERED:Please either apply through this advert or emailing me directly on . For further information please call me: / . By applying for this role, you give express consent for us to process and submit (subject to required skills) your application to our client in conjunction with this vacancy only. KEY SKILLSDEVOPS ENGINEER, DEVOPS, SITE RELIABILITY ENGINEER, PLATFROM ENGINEER, PLATFROM, CLOUD, AWS, AWS CLOUD, AWS ENGINEER, ANSIBLE, TERRAFORM, CLOUD SUPPORT, CLOUD INFRASTRUCTURE, DEFENCE, NATIONAL SECURITY, DV CLEARED, DV CLEARANCE, SECURITY CLEARED, SC CLEARANCE, NSD

Lead Developer - Remote UK - £70,000-£80,000 DOE We're working with an organisation that is building a new platform and is looking for a Lead Developer to take technical ownership from day one. This is an excellent opportunity for a senior full-stack engineer who thrives in a structured, enterprise-grade environment and enjoys staying hands-on while defining architecture, setting engineering standards, and driving secure delivery practices within a "fail fast" product mindset. The Opportunity You'll lead engineering on the first product within a wider cloud transformation strategy. The platform consists of a .NET MAUI mobile application (iOS & Android), an Angular 21 web application, and Azure-hosted backend services built using modern Microsoft technologies. Reporting to the Product Owner, you'll play a pivotal role in defining architectural standards, implementing robust DevOps practices, and ensuring security, performance, and maintainability are embedded from the outset. This role blends hands-on development, architectural leadership, and close collaboration with Product, UX (Figma), and QA teams. The expectation is high-quality, production-ready code with strong test coverage and fully automated deployments. Key Responsibilities You will be responsible for: • Writing secure, production-grade, well-tested code across backend, frontend, and mobile, • Taking architectural ownership of APIs, mobile offline patterns, and Azure infrastructure, • Designing and building RESTful services using modern .NET and clean architecture principles, • Leading Infrastructure as Code implementation using Bicep, • Driving CI/CD maturity (Bitbucket preferred) with strict SDK and dependency version control, • Ensuring OWASP-aligned secure coding practices and GDPR compliance, • Collaborating with QA to support automated and manual test strategies, • .NET 10 / ASP.NET Core Web API, • Entity Framework Core with Azure SQL, • .NET MAUI (offline-first mobile design), • Microsoft Azure (App Services, Azure SQL, Blob Storage, Key Vault, Application Insights), • Azure Entra ID authentication & RBAC, • Angular 21, • TypeScript (strict mode), • DevExpress DevExtreme (v25), • NUnit, Vitest, and Playwright What They're Looking For • 7+ years' commercial software development experience, • Minimum 3 years working within fast-paced, "fail-fast" delivery environments, • At least 2 years in a leadership position, • Strong expertise in modern .NET and API design, • Proven Angular experience (v15+), • Hands-on Azure architecture and deployment experience, • Experience implementing Infrastructure as Code (Bicep preferred), • Experience integrating Azure Entra ID authentication, • Strong understanding of CI/CD and enterprise DevOps practices, • Security-first mindset with knowledge of OWASP Top 10, • Experience building high-performance, enterprise-grade systemsSalary & Benefits, • £70,000-£80,000 (DOE), • Remote working, • Opportunity to define technical standards from the ground up, • High-autonomy role within a senior engineering environment If you're open to a confidential discussion, apply now and I'll be in touch. Oscar Associates (UK) Limited is acting as an Employment Agency in relation to this vacancy. To understand more about what we do with your data please review our privacy policy in the privacy section of the Oscar website.

Fire & Security Service Engineer\n Location: North East (Newcastle area)\n Salary: £30,000 – £39,000 (DOE)\n\nThe Package\n\n30 minutes paid travel time each way\nCompany vehicle (including personal use)\nFuel card\nMobile phone, laptop & service Kindle\nCalibrated test equipment & access equipment provided\nPension scheme\n20 days holiday + bank holidays\nSick pay\nEarly finish on Fridays\nOvertime opportunities\nBonus scheme\n\nAbout the Company\n\nWe are a well-established, forward-thinking Fire & Security company based in the North East, with over 23 years of industry experience. Our continued success is built on delivering high-quality design, installation, and maintenance solutions across a strong portfolio of commercial clients.\n\nDue to ongoing growth and new contract wins, we are now looking to expand our engineering team. This is an excellent opportunity to join a supportive business that values its engineers and offers long-term career development.\n\nThe Role\n\nAs a Fire & Security Service Engineer, you will be responsible for:\n\nServicing and maintaining Fire & Security systems\nFault finding and carrying out repairs across multiple system types\nOccasional installation work where required\nCovering Newcastle and the surrounding North East region\nWorking across a variety of commercial sites\nEnsuring high standards of customer service at all times\n\nExperience Required\n\nProven experience working on Fire & Security systems, including:\n\nCCTV\nAccess Control\nIntruder Alarms\nFire Alarm systems\n\nFull UK driving licence\nAbility to work independently and manage your own workload\nStrong communication and customer-facing skills\nGood IT/computer literacy\nKnowledge of testing and commissioning practices\nECS Gold Card, IPAF, and PASMA (desirable but not essential)\nEngineers with either a Fire or Security bias will be considered\n\nWhat’s on Offer\n\nYou’ll receive a competitive salary, strong benefits package, and the opportunity to develop your skills within a growing and reputable company. This role offers stability, a supportive team environment, and genuine long-term progression.\n\nIf you're interested in finding out more, please apply with your CV or contact Courtney Gilgunn for a confidential discussion.\n\nSER-IN

Analytics Engineer (12 month FTC) Up to £67,000 Remote (UK Based) This is an opportunity to join a growing analytics engineering function at a pivotal point in its data transformation. THE COMPANY They are a large, established law firm operating nationally, with thousands of colleagues across multiple UK offices. Data and analytics play an increasingly strategic role, supporting both operational and client facing teams. The culture combines high technical standards with a strong focus on collaboration, flexibility and doing the right thing. THE ROLE As an Analytics Engineer you will own the design and delivery of analytics-ready data within a modern Lakehouse environment, shaping how data is modelled, curated and consumed across the organisation. Specifically, you can expect to be involved in the following: • Play a key role in a Lakehouse programme, sitting at the intersection of analytics, engineering and the business., • Design and own analytics data models, transforming data from enriched layers into curated, analytics ready datasets., • Develop and maintain robust SQL and PySpark transformations within Databricks. The successful Analytics Engineer will have the following skills and experience: • Strong commercial experience as an analytics focused engineer, rather than an analyst., • Advanced data modelling capability, including dimensional modelling., • Strong PySpark and SQL skills in production environments., • Hands on experience with Databricks, including pipelines and governed data environments. The successful Analytics Engineer will receive the following benefits: • Salary up to £67,000 - depending on experience. Please register your interest by sending your resume to Majid Latif via the Apply link on this page.

MTrecs new career opportunity We are seeking an experienced and proactive Small Works Engineer to deliver small works projects across TECS, fire alarm, intruder alarm, CCTV, access control, and life safety systems. The Job youll do • Deliver small works ranging from minor installations and system upgrades to remedial works., • Maintain compliance with relevant British Standards, regulations, and company pr... ZIPC1_UKTJ

Job title Fire and Security Engineer Function Fire Location Field based Reports to Service Manager (North/South) Responsible for staff N/A About our business JLA is a mission critical infrastructure solutions business offering services Laundry, Catering, Heating, Fire Safety, Infection Control and Air Conditioning. The company offers an end-to-end, on premise, machine supply and breakdo... * * * * * * * * * * * * * * * ZIPC1_UKTJ

DevOps Engineer - FinTech - Newcastle (Tech stack: DevOps Engineer, PowerShell, C#, Java, Python, Ansible, Terraform, Docker, Kubernetes, Docker Swarm, ELK, Grafana, CI/CD, TeamCity, SQL Server, Windows, Linux, Programmer, Developer, Architect, DevOps Engineer) Our client is a cutting-edge FinTech company with a reputation for innovation and excellence. They design and build advanced trading and analytics platforms used globally by some of the world's leading financial institutions. With ambitious plans for growth and new product launches, they are now seeking a talented DevOps Engineer to join their team in Newcastle. As a DevOps Engineer, you will be responsible for creating, maintaining, and optimising the infrastructure and pipelines that support highly complex financial software platforms. You'll work closely with developers and stakeholders, ensuring deployments are seamless, environments are robust, and systems are both secure and scalable. This is a fantastic opportunity to apply your technical expertise in a collaborative, fast-paced environment where innovation is actively encouraged. The successful candidate will bring: • A 2:1 degree or above in Computer Science (or related), ideally from a top university., • Strong ability in scripting with PowerShell or a similar language., • Hands-on coding skills in at least one of C#, Java, or Python., • Practical knowledge of automation tools such as Terraform or Ansible., • Background in container platforms (e.g., Docker) with orchestration using Kubernetes or Swarm., • Familiarity with system monitoring solutions (e.g., ELK, Grafana, or similar)., • Proven track record in building and maintaining CI/CD pipelines, preferably with TeamCity., • Experience working with SQL databases, particularly Microsoft SQL Server., • Comfort managing both Windows and Linux environments., • Working knowledge of Atlassian products such as JIRA or Bitbucket., • Exposure to artifact management tools like Artifactory., • Deployment automation experience with Octopus Deploy., • Awareness of code quality and analysis tools (e.g., SonarQube)., • Background with job scheduling platforms such as Control-M., • Experience with major cloud providers (Azure, AWS, GCP). This is an exceptional opportunity to join a forward-thinking organisation where your contributions will directly shape the delivery of world-class FinTech products. Location: Newcastle, UK (Fully Office Based) Salary: £50,000 - £90,000 + Bonus + Benefits Applicants must be based in the UK and have the right to work in the UK. Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions! NOIRUKTECHREC NOIRUKREC

Avanade UK Ltd is an IT consulting company that helps organisations improve their operations through technology. Specialising in Microsoft platforms, it provides services in cloud computing, data and AI, cybersecurity, and business applications, supporting clients with digital transformation and modern workplace solutions. Why join us? • You will become part of an active and growing AI community, • Your future colleagues will help you with questions and challenges. Moreover, there is a pleasant, informal working atmosphere, • Knowledge development is our focus, and we ensure this both by offering formal training opportunities as well as informal evenings where peers share their knowledge, • With your passion, you can use the latest Microsoft technology to make a daily difference for our customers in the Enterprise market, • We have a strong focus on the career and development opportunities of all our people, • Everyone has a career advisor who will work with you to guide you in choosing from the many training opportunities we offer Responsibilities: • Contribute to technology and digital transformation projects, • Assist in preparing client presentations and proposals, • Conduct research and analysis on IT and technology trends, • Work with senior team members to analyse business practices and identify technology-driven improvement opportunities, • Collect, clean, and prepare data from multiple sources to ensure quality and usability, • Write and maintain scripts using Python and SQL to process and analyse data, • Support exploratory data analysis to identify trends, patterns, and insights, • Assist in developing and testing basic machine learning models, • Help build dashboards and visualizations using tools such as Power BI, • Test and validate data pipelines to ensure accuracy and reliability, • Passion for technology & digital innovation, • Motivation for a career in technology consulting, • Curiosity about Data & AI, Cloud, Software Engineering, or Cybersecurity, • Basic interest/experience in Python, SQL, C#, automation, or software development, • Familiarity or willingness to learn Git, DevOps, engineering principles, • Desire to train on Microsoft Azure or existing Microsoft certification, • Interest in cloud platforms (Azure preferred), • Communication skills (written & spoken English), • Analytical thinking and problem-solving, • Basic Python / SQL / C# / automation, • Knowledge of data engineering, AI, software engineering, cybersecurity, IAM, or cloud security, • Awareness of Agile/Scrum, • Interest or experience with Azure, AWS, or GCP Standard entry: • Level 3 qualification (apprenticeship/A-levels/BTEC, etc), • 5 GCSEs, including English and Maths at Grade 4 (C) or above If you hold international equivalents of the above qualifications, at the time of your application you must be able to provide an official document that states how your international qualifications compare to the UK qualifications. For more information please visit the UK ENIC website. Working hours: 40 hours per week Benefits: • Salary: £24,707 pounds/year, • Holidays: 25 days/year, • Group Personal Pension Plan (GPPP) - We support your long-term financial future from the very start of your career with us. Employees are automatically enrolled into our Group Personal Pension Plan in their second month of employment, making it easy to begin building retirement savings early. Contributions are made via salary sacrifice, with the company contributing 7% and employees contributing a minimum of 3.5%, with the flexibility to adjust contributions twice a year (January and July). Our pension scheme offers a range of investment fund options, giving you the flexibility to align your pension strategy with your personal goals, • Life Assurance, • Private Healthcare Plan (Administered by AXA), • Dental Insurance (Bupa), • Peppy Health App: Through our partnership with Peppy, employees have access to personalized, expert-led support across key life and health areas — including women’s health, men’s health, fertility, menopause and early parenthood. The service is available to employees and their partners aged 18+, and includes confidential chat support, educational webinars and one-to-one video consultations with qualified practitioners — providing accessible guidance when it matters most, • Flu Vaccination Reimbursement: To support seasonal wellbeing, employees can claim reimbursement of up to £25 annually towards the cost of a flu vaccination, • Professional certification funding - Microsoft certification provided 100% free by our company, • Transition into Technology Consultant or Engineer roles, • Exposure to cloud services, app development, data platforms, automation, analytics, • Opportunities to work on Microsoft-powered solutions Our apprenticeships are the perfect way to gain new skills, earn while you learn, and launch yourself into an exciting future. With over 50,000 successful apprenticeship graduates, we're a top 50 training provider, dedicated to helping you succeed. Interested? Apply now! Please be advised that this advert may close prior to the closing date stated above if a high number of applications are received. If you are interested in this vacancy please apply below as soon as possible.

We have an exciting opportunity for a Geospatial Engineer to join a well established company based in the North East. You will need to be based in the North East. Job Description: • Overseeing geospatial activities to ensure full compliance with project and site requirements., • Prepare, manage, and maintain spatial databases., • Liaising with clients, contractors, and internal teams., • Support continuous improvement by helping to design and implement automation scripts, templates, and scalable geospatial processes., • Provide geospatial surveying supports, including establishing and supplying precise setting‑out data., • Establish, verify, and maintain survey control networks, issuing updates and reports as necessary. Skills and experience: • Experience in delivery of Geospatial Engineering within the construction industry, • Technical qualifications in construction related subject or trade recognised qualifications' which could include HND, City & Guilds, etc., • Proficiency in Python is required. Knowledge of additional languages (e.g., Java, SQL) is advantageous., • Knowledge of working with multiple EO (Earth Observation) data sources., • A good practical understanding of Health & Safety requirements., • A good understanding of all facets of the construction process.

Electronics Engineer - Project Engineer Gateshead We are looking for an experienced Electronics Engineer to join a small, multidisciplinary engineering team delivering complex technical solutions within the Defence and Security sector. The role combines hands-on engineering with technical leadership, stakeholder engagement, and project delivery responsibilities. Key Responsibilities • Deliver electronics-focused engineering work packages across development and delivery phases., • Check over and review the electronic equipment and devices, • Work effectively within small, diverse technical teams using flexible delivery approaches., • Translate technical requirements into practical engineering solutions, particularly for Defence and Security applications., • Support project delivery, bid activity, and commercial objectives within a private-sector environment., • Communicate technical findings and recommendations clearly to technical and non-technical stakeholders., • Liaise with manufacturers, suppliers, clients and customers and ensure the project is hitting targets and timelines, within budget, • Handle multiple projects at once Experience and Skills • Comprehensive engineering knowledge with a focus on electronics (academic, professional, or vocational)., • Experience managing multiple concurrent engineering workflows across disciplines and regulatory frameworks., • Proven ability to manage internal and external stakeholders and operate with minimal supervision., • Experience managing technical projects and holding technicians accountable for delivery and quality., • Meticulous approach to engineering change, configuration control, and obsolescence management., • Strong customer-facing and written communication skills. Desirable Experience • Experience in the UK Defence and Security sector is great but experience from other sectors is also considered, • Subject matter expertise in electronics, • Experience delivering technical services or products to the UK public sector. You will need to hold or be eligible for Security Clearance for this role. If you are interested in the Electronics Engineer role, then please apply today!

PRINCIPAL DEVOPS ENGINEER- SC CLEARED PRINCIPAL DEVOPS ENGINEER • Permanent opportunity for a Principal DevOps Engineer with SC Clearance., • Salary up to £105,000 DOE, • Hybrid opportunity with Newcastle based offices WHO ARE WE? We’re hiring for DevOps Engineers at principal level to join a top consultancy delivering cutting-edge solutions for industry-leading Public Sector and Defence clients. You’ll have the opportunity to work across multiple high-impact, innovative and mission-critical projects, shaping solutions that make a real difference. Due to the sensitive nature of the work, an SC Clearance eligibility is required. THE PRINCIPAL DEVOPS ENGINEER • Active SC Clearance or SC Clearance eligibility, • Newcastle Based or ability to travel to Newcastle., • Experience as in a Senior/ Principal DevOps/ Platform engineering role PRINCIPAL DEVOPS ENGINEER ESSENTIAL SKILLS • Strong Linux expertise (RHEL/CentOS) with experience supporting production systems, • Git for version control and collaborative development (GitHub / GitLab), • AWS cloud infrastructure, ideally with Infrastructure as Code using Terraform, • Kubernetes and container technologies (Docker) for modern platform environments, • Experience working with CI/CD pipelines and automation tooling (e.g. Jenkins, Bamboo), • Strong understanding of modern platform architecture, microservices and cloud-native systems, • Good communication skills and ability to provide technical leadership. TO BE CONSIDERED: Please either apply through this advert or emailing me directly on . For further information please call me: 02038540120/ 07842002894. By applying for this role, you give express consent for us to process and submit (subject to required skills) your application to our client in conjunction with this vacancy only. KEY SKILLS DEVOPS ENGINEER, DEVOPS, SITE RELIABILITY ENGINEER, PLATFROM ENGINEER, PLATFROM, CLOUD, AWS, AWS CLOUD, AWS ENGINEER, ANSIBLE, TERRAFORM, CLOUD SUPPORT, CLOUD INFRASTRUCTURE, DEFENCE, NATIONAL SECURITY, DV CLEARED, DV CLEARANCE, SECURITY CLEARED, SC CLEARANCE, NSD

Lead E&I Engineer Newcastle Upon Tyne Salary: up to £70,000 basic + benefits Jackson Hogg is delighted to be working with a leading engineering consultancy to bring a Lead E&I Engineer to take ownership of Electrical & Instrumentation delivery across complex engineering projects. This is a permanent, full time on site role based in Newcastle. Lead E&i Engineer Key Responsibilities: • Lead the delivery of the E&I scope to agreed time, cost, and quality targets, • Provide technical and people leadership to E&I engineers and designers, • Own E&I engineering schedules, deliverables, and progress reporting, • Manage E&I manhour budgets, resourcing levels, and workload planning, • Ensure all E&I designs comply with legislation, industry standards, and client specifications, • Control and manage scope change in line with formal change management procedures, • Maintain technical integrity and accuracy across all E&I deliverables, • Participate in and contribute to HAZID, HAZOP, safety, and design reviews, • Provide guidance on hazardous area installations, including ATEX compliance, • Ensure all documentation is checked and approved in line with company procedures, • Support tendering activities, including scope definition and CTR generation, • Coach and develop Engineers, Graduates, and Trainees within the discipline Lead E&I Engineer Key Requirements: • HNC or higher in Electrical or Instrumentation Engineering, • Significant experience delivering E&I engineering on Oil & Gas brownfield projects (Feasibility, Concept, FEED, EPC), • Proven experience leading E&I engineering teams on projects, • Strong working knowledge of industry codes, standards, and legislation, • Experience with manhour control, cost awareness, and change management, • Solid understanding of hazardous area design and ATEX directives, • Experience contributing to HAZOP, HAZID, and constructability reviews, • Excellent communication and stakeholder management skills, • Strong commercial awareness and ability to operate at project leadership level Desirable • Degree in Electrical or Instrumentation Engineering, • Chartered status (CEng / MIET), • SIL experience, • Offshore experience and/or offshore survey exposure, • BOSIET certification If you are interested in this opportunity please contact Eleni at 07415558839 or

Location: Primarily remote, with adhoc visits onsite in Newcastle Contract Type: 12-Month Fixed Term Contract (FTC), with a view to go permanent Employer: Amber Labs – Digital Consultancy Clearance: Active SC clearance preferred, SC Eligibility accepted Start Date: Immediate About Amber Labs Amber Labs is a forward-thinking digital consultancy delivering innovative cloud, data, and DevOps solutions across the UK public sector. We specialise in helping organisations achieve digital transformation at pace while maintaining the highest security and governance standards. We are seeking DevOps Engineers with deep core cloud expertise to join a critical government programme. This is an excellent opportunity to work on highly impactful projects while enjoying a flexible, collaborative environment. Role Overview As a DevOps Engineer, you will play a key role in designing, building, and optimising cloud-based infrastructure, cloud security and cloud provisioning principles. You will work within an Agile team, focusing on scalable, secure, and resilient cloud architectures that support modern digital services. Key Responsibilities • Deploying, implementing, and supporting AWS-based infrastructure using Infrastructure as Code (Terraform), • Develop and maintain CI/CD pipelines to enable continuous integration and delivery for effective containerisation., • Enhancement of container orchestration with Kubernetes in conjunction with CI/CD integration methods and delivery., • Automate system deployments, configuration, and monitoring for reliability and performance, • Collaborate with developers, security engineers, and architects to deliver high-quality solutions, • For Senior Engineers: Provide technical leadership, mentor team members, and contribute to solution design decisions Skills & Experience Required • SC Clearance preferred, however, SC Eligibility accepted (applications without clearance cannot be considered), • Proven experience with AWS core services (EC2, S3, VPC, IAM, Lambda, ECS/EKS), • Expertise in Infrastructure as Code (Terraform, CloudFormation), • Strong knowledge of CI/CD tools (Jenkins, GitHub Actions, GitLab CI), • Experience with containerisation and orchestration (Kubernetes), • Version control experience (Git), • Linux OS Apply Now and help shape the future of UK digital services with Amber Labs.

Engineering Facilities Manager Role: Full-time, Permanent Location: Fawdon, Newcastle upon Tyne Salary: Competitive + bonus + benefits The Role: Reporting directly to the Fawdon site Associate Director of Engineering, you, will lead the site facilities engineering team, supporting all aspects of facilities engineering and compliance, to world class pharmaceutical standards. -Management and coordination of the site facilities engineering team and budget to support site pharmaceutical production. -Ensuring all site legislative compliance requirements are met, including (but not limited to) DSEAR, PSSR, PUWER, Electricity at Work Act etc. -Ensuring all facilities related GMP compliance is adhered to. -Management and control of the site planned maintenance systems and metrics. -Liaise with the Site Project Manager for facilities Capex requirements. -Provide expert advice and guidance for new facilities related Capex installations as required. such as WFI Systems, HVAC, Chillers Boilers and CHP plant. -Response to facilities breakdown situations in a timely manner to minimise Production downtime and maximise production and efficiency. -Management of the site facilities engineering team, comprising of engineering team leader, site electrical engineer, compliance engineer, validation engineer and engineering administrator. -Responsible for the maintenance and upkeep of all site grounds, buildings, utilities (including WFI systems, CIP systems, Chillers, Boilers, CHP Plant, HVAC etc) and infrastructure. The Person: • HND in suitable engineering discipline., • Preferably have experience of site facilities in a pharmaceutical, Food or Cosmetic environment., • A strong manager with a flexible and open communication style with the ability to direct and train others., • Familiarity with computer maintenance management systems, • Proactive approach to engineering maintenance management ., • Experience working in a facilities engineering environment., • Understanding of health and safety legislation regarding safe working practices., • Experience investigating performance and quality issues with exposure to Continuous improvement and lean techniques. In return, we offer a competitive salary and rewards package (including holiday, bonus and pension scheme). Not to mention the opportunity to genuinely make a difference in a new and dynamic role within a progressive and expanding business, at an exciting time of growing international reach. How to Apply: If you possess the experience, passion and ability to make this role a success then we would like to hear from you. Please complete your Candidate Profile on our careers site to apply for this role. The closing date is 06/04/26. For more information, you can contact us on: About us: Accord Healthcare Europe is one of the fastest growing pharmaceutical companies in Europe. Accord has one of the largest market footprints of any European generic and biosimilars companies selling generic medicines in over 80 countries around the world. This global footprint enables us to deliver vital, affordable medicines to national health systems supporting healthcare professionals to transform patient lives worldwide. The approach of Accord is agile and inventive, always seeking to improve products and patients' access to them. Accord are driven to think differently and deliver more for the benefit of patients worldwide. To continue our growth, we’re looking for the best and brightest technical minds and forward-thinking business professionals. Keeping our people at the heart of all we do, we offer rewarding opportunities for those looking for continued personal and professional growth, investing in training and development tailored to each individual’s focus. So, if you’re looking for an inclusive company to take your career to the next level, you’re certainly in the right place; come and join us to make it better.

We are a specialist recruitment agency partnering with a prestigious UK-based consultancy renowned for delivering large-scale, mission-critical data centre projects across the UK and Europe. As their project portfolio grows, we are seeking an experienced Principal Engineer with strong leadership skills in either Electrical or Mechanical disciplines. This is an exceptional opportunity to lead at a strategic level, shaping the delivery of world-class hyperscale, colocation, and bespoke data centre solutions. Who We're Looking For We want to hear from Principal-level Electrical or Mechanical Engineers with extensive experience driving multi-disciplinary design teams and complex data centre projects across UK and European markets. You will be a key figure in project strategy and delivery excellence, ensuring technical leadership, client satisfaction, and the highest standards in engineering design and coordination. Key Responsibilities (Depending on Discipline) For Electrical Engineers: • Provide strategic leadership on electrical design for hyperscale and colocation data centres across the UK and Europe, • Oversee high-level power distribution designs including UPS, switchgear, generators, and standby power systems, • Lead development of design standards, quality assurance, and compliance across projects, • Foster innovation and adoption of emerging technologies in electrical infrastructure, • Act as a senior client advisor on electrical systems and project feasibility For Mechanical Engineers: • Lead mechanical design strategy for HVAC, cooling, and environmental control systems on large data centre projects, • Drive innovation in cooling and energy efficiency solutions tailored to hyperscale and colocation requirements, • Establish design frameworks, standards, and best practices across the consultancy, • Manage high-level stakeholder relationships including clients, contractors, and regulatory bodies, • Mentor and develop senior engineers and technical leads For Both Roles: • Lead multi-disciplinary design teams to ensure seamless integration of electrical and mechanical systems, • Oversee project delivery, risk management, and compliance with UK and international standards (BS, IEC, ASHRAE, CIBSE, NFPA), • Engage in business development and bid strategy to secure new data centre projects, • Represent the consultancy at industry events and foster client relationships across UK and Europe, • Champion professional development and knowledge sharing within the engineering teams Requirements • Degree-qualified in Electrical or Mechanical Engineering (or Building Services), • 12+ years’ progressive experience in engineering with at least 5 years in a principal or senior leadership role, • Proven track record of delivering complex hyperscale, colocation, or mission-critical data centre projects across UK and Europe, • Deep technical expertise in your core discipline with strong cross-discipline collaboration skills, • Chartered Engineer status (CEng) essential, • Exceptional leadership, communication, and stakeholder management skills, • Experience driving innovation, quality assurance, and continuous improvement in engineering design What’s on Offer • Executive-level role on cutting-edge data centre projects with global impact, • Highly competitive salary and benefits package, including bonus and equity options, • Hybrid working arrangements, • Highly Competitive + Executive Benefits, • Leadership development and continued professional growth opportunities, • Collaborative, high-performing, and innovative work culture

Senior Electrical Design Engineer Newcastle Upon Tyne (hybrid - 2 days WFH) Salary: up to £50,000-£55,000 DOE This position is responsible for the design, specification and testing approval of marine electrical equipment, which is produced by us for naval customers. Duties will include the production of detailed technical specifications, drawings and test procedures for electrical /control systems, in accordance with contract specifications and company procedures. Key Accountabilities • Prepare electrical schematics and block cable diagrams using 2D CAD systems, as well as specialist electrical design software (e.g., Auto-CAD Electrical, EPLAN, WSCAD etc.), • Prepare and maintain technical specifications, commissioning and system test procedures for marine electrical equipment., • Provide technical support to internal and external customers as required., • Assist in the review, co-ordination and approval of technical documentation received from suppliers and customers (particularly with respect to motors, variable speed drives and the design / layout of control panels and operator control stations)., • Provide technical support to tender activities including estimating, specification development and bid compliance review., • Carry out electrical calculations associated with equipment sizing, harmonic emissions and arc flash electrical safety assessments., • Review configuration of motor variable speed drive control systems., • Identify and develop R&D and Continuous Improvement opportunities., • Be self-motivated, prepared to use their own initiative and able to work independently, or work effectively as part of a multidisciplined team., • Investigate Product Safety and Technical problems using structured problem-solving techniques., • Manage supplier interfaces and provide technical assistance / test result approval to suppliers., • B.Eng./B.Sc. in either Electrical Engineering/Control Engineering, or equivalent technical capability based on practical knowledge and experience., • Competent user of a recognised electrical CAD package (AutoCAD, EPLAN, etc.) in the production of electrical drawings and schematics., • Creation of control panel layout drawings and Engineering Bills of Materials., • Good understanding of fundamental electrical and mechanical principles, with experience of practical engineering applications intended for use in a marine environment, or related industries., • Proven track record in technical delivery of projects to quality, cost and schedule., • Competent user of MS Office suite of programmes (Word, Excel, Outlook, Power-point etc.)., • Experience of working closely with suppliers, customers and field service teams., • Ability to build relationships that bring together a broad range of talents, experience and perspectives thus promoting the "One Team" approach., • Acts in a professional and courteous manner to our colleagues and Customers at all times., • Comply with the company's QHS&E policies and procedures., • Knowledge of AC induction motor / PM motor control systems and variable speed drive technologies., • Knowledge of EMC and harmonic emission control practices., • Knowledge of design verification and validation processes to ensure equipment complies with customer requirements., • Basic knowledge of electrical equipment reliability and safety control mechanisms and how these are verified using FMECA, HAZOP and ARM analysis tools., • Excellent written & verbal communications, • Operation of 2D CAD systems, • Configuration control using data management systems, • An exciting and important position working for the world-leading supplier of maritime solutions, • An inspiring and safe work environment, • Professional development and career opportunities, • We offer hybrid working arrangement

NDT Electronic Services Ltd (NDTE) is the UK’s leading specialist in sales, service, repair, instrumentation calibration, and planned maintenance of industrial radiography Non-Destructive Testing (NDT) equipment and systems. We are looking for a high calibre Electrical or Electronic Engineer who enjoys fault finding properly, solving complex problems, and working on specialist equipment not found in most engineering environments. This is not a repetitive production role. You will be working on specialist industrial radiography and NDT equipment, carrying out diagnosis, repair, calibration, and commissioning both in our workshop and occasionally on customer sites. If you are the type of engineer who enjoys getting to the root cause of faults rather than swapping parts, this role will suit you. The role • Diagnose, fault find and repair electrical, electronic and electro-mechanical systems, • Work on specialist radiography and NDT equipment used in industrial environments, • Carry out calibration, testing and commissioning of systems, • Undertake planned and reactive maintenance both in the workshop and on site, • Produce clear and accurate technical reports and documentation, • Support customers and act as a professional representative of the business when on site, • Contribute to improving processes, reliability and technical standards What we are looking for • Strong electrical or electronic engineering background with hands-on experience, • Proven ability to fault find on industrial equipment and control systems, • Experience working with PLC-based systems and industrial machinery, • Ability to read and interpret schematics and engineering drawings, • Comfortable working independently and taking ownership of problems, • High personal standards and a safety-first mindset Experience in some of the following would be advantageous • Instrumentation and calibration, • Board-level or component-level diagnostics, • Mechanical fitting and assembly work, • Functional safety systems What you will get • Varied and technically interesting work, not repetitive production, • Exposure to specialist and niche equipment, • A stable, growing business with long-term opportunities, • Ongoing development and the chance to broaden your technical capability, • A team that values doing things properly and takes pride in its work Additional requirements • Full UK manual driving licence, • Ability to obtain security clearance, • Ability to provide consistent employment history

Data Engineer - FinTech - Newcastle (Tech stack: Data Engineer, SQL, Python, AWS, Git, Airflow, Data Pipelines, Data Platforms, Programmer, Developer, Architect, Data Engineer) Our client is a trailblazer in the FinTech space, known for delivering innovative technology solutions to global financial markets. They are expanding their engineering capability in Newcastle and are looking for a talented Data Engineer to join their team. This role will focus on building and optimising systems that make complex datasets accessible, reliable, and valuable for the business. As a Data Engineer, you will take responsibility for the development of high-quality pipelines that process and manage large volumes of data from a range of external and internal sources. You'll play a key role in enhancing and maintaining their central data platform, ensuring the smooth delivery of information that supports investment decision-making. Working closely with stakeholders across the business, you'll help shape how data is accessed, tested, and leveraged to maximise value. The successful candidate will bring: • 3-6 years of relevant experience working as a Data Engineer (or in a closely related role)., • A 2:1 or above in Computer Science (or related field), ideally from a Russell Group university., • Direct experience in the hedge fund sector (essential)., • Strong ability to design and build data pipelines that integrate multiple data sources., • Proficiency in SQL and Python, with solid exposure to AWS or other cloud-based data tools., • Familiarity with version control systems such as Git and workflow/orchestration tools such as Airflow., • Proven ability to test and troubleshoot data systems, with a track record of improving reliability and accuracy., • Excellent communication skills, with the ability to collaborate effectively in a team environment. Location: Newcastle, UK (Fully Office Based) Salary: £45,000 - £80,000 + Bonus + Benefits Applicants must be based in the UK and have the right to work in the UK. Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions! NOIRUKTECHREC NOIRUKREC

Pay: £40,000.00-£45,000.00 per year + Overtime Field Base in Newcastle and surrounding areas Exciting opportunity working for a tech company where you will be responsible for servicing, fault-finding, and repairing equipment at customer sites. Key Responsibilities • Carry out routine servicing, inspections, and preventative maintenance, • Diagnose faults and perform repairs efficiently, • Calibrate sensors, control units, and associated hardware, • Provide on-site technical support and troubleshooting, • Complete service documentation and reports accurately, • Ensure all work complies with health and safety regulations, • Proven experience as a Field Service Engineer, Maintenance Engineer, or similar role, • Mechanical aptitude and experience working with equipment, • Experience working on construction, plant, or industrial machinery beneficial, • Full driving licence, • Strong communication and customer service skills, • Ability to work independently and manage time effectively Job Types: Full-time, Permanent Work Location: On the road

Controls Commissioning Engineer\nNorthumberland, United Kingdom\nSalary: £50,000-£60,000 DOE + daily rates + benefits\nJackson Hogg in delighted to be working with a leading offshore subsea engineering business, which delivers offshore equipment to oil&gas industries. They are currently undergoing expansion and looking for capable engineers to join their progressive team.\nThis is a permanent, hybrid role with offshore travelling.\nElectrical Commissioning Engineer Key Responsibilities:\n * Lead the commissioning process for offshore equipment and systems, full lifecycle.\n * Develop and implement commissioning plans, procedures, and schedules.\n * Coordinate with multidisciplinary teams for the successful integration and testing of complex equipment.\n * Conduct site inspections and testing to verify sub-systems.\n * Troubleshoot and resolve electrical and/or control technical issues that arise during the commissioning process, and during offshore trials.\n * Provide onsite, offshore and office based technical support and training to customers and end-users on the operation and maintenance of commissioned equipment.\n * Prepare detailed reports and documentation of commissioning activities, including test results, deviations, and corrective actions.\n * Collaborate with Project Owners to ensure commissioning milestones are achieved within project timelines and budget constraints.\nElectrical Commissioning Engineer Key Requirements:\n * Bachelor's degree in Electrical or Controls Engineering.\n * Proven experience in commissioning engineering, preferably in the offshore or marine industry.\n * Strong technical knowledge of offshore equipment and systems.\n * Strong organisational and project management skills, with the ability to manage multiple tasks and priorities.\n * Effective communication and interpersonal skills, with the ability to work collaboratively with internal teams and external stakeholders.\n * Willingness to travel to offshore sites and customer locations as required.\nIf you are interested in this opportunity, feel free to let me know using the details below

Our client is an engineering company with a strong focus on the offshore energy industry. They are looking for a Senior Mechanical Design Engineer to join their team due to an increase in projects.\n\nThe role:\n \nTake ownership and provide technical leadership of a team of Engineers in the successful delivery of projects, within the specified time, budget, to the specification and the required quality standards (Senior Engineers may be assigned to multiple projects at any one time) \nLeading the day to day Engineering tasks / deliverables of the Engineering team as the design authority, this could be associated with sales or project work \nProvide supervision to a team of Engineers including coaching, mentoring, providing direction and intervention when required \nEnsure that design practices / guidelines are followed and provide input into continuous improvement activities, promoting a delivery focussed culture \nEnsure that the Engineering team clearly understand their responsibilities throughout the full project lifecycle (concept through to installation), taking ownership to make key decisions, call reviews when required and check / approve design documentation within the design team \nPromote ownership to the Engineering team, ensuring there is a focus on delivery, commitment to hitting deadlines and working as efficiently as possible \nInterpret mechanical, hydraulic, electrical and control requirements to ensure that the project \nis designed to perform as required. \nInterpret mechanical, hydraulic, electrical and control requirements to ensure that the project is designed to perform as required. \nSupport the failure mode effect analysis (FMEA) process and take part in design safety reviews \nEnsure that mechanical, hydraulic and electrical interfaces are considered in the design process. Work with the other discipline engineers to ensure that correct interface information is used throughout the design The person:\n \nEngineering design and development experience, demonstrated over 8 years + in a relevant environment \nEducated to degree level or equivalent in a relevant engineering subject \nDesirably, be a Member/Fellow of recognised Engineering body (e.g. IMechE) with Chartered Engineer status. \nIn depth knowledge and experience in design and manufacture of some or all of the following: Trenchers, Cable/Pipe lay, LARS and bespoke Onshore and Offshore equipment. \nThorough knowledge of mechanical theory, design of mechanical systems and selection of components in the onshore, offshore and subsea sectors

We are looking for a Hydraulic Design Engineer to join our client in the marine/ offshore industry in their Newcastle office. Reporting to a Senior Engineer, the Hydraulic Design Engineer is responsible for producing the Hydraulic Engineering deliverables for a work pack / sub-system or project.\n \nThe role:\n-Producing technical solutions to complex engineering problems (may involve project or sales \nwork), this can include concept design, detailed design, calculations, analysis and technical \nreports / documentation\n-Take ownership of the tasks assigned through to successful delivery within the specified time, \nbudget to the specification and required quality standards\n-Interpret mechanical, electrical and control requirements to ensure that the hydraulic design \nperforms as per the client / project requirements\n-Contribute to writing of project technical documentation such as Functional Design \nSpecification and technical specifications\n-With support from Senior / Lead Engineer ensure that an appropriate amount of analysis / \ncalculations have been performed on the sub-system / project\n-When developing the technical solution ensure that due consideration is given to construction, \ncommissioning, test and operation & maintenance of the equipment\n-As required, ensure that work pack BOM in Teamcentre structure manager is set up in accordance with \nbest practice and is kept up to date\n \n The person:\n -Engineering Design and Development experience demonstrated over 2-5 years.\n-As a minimum, educated to an Engineering Degree level ( B Eng or M Eng)\n-Member of recognised Engineering body (e.g. IMechE) or working towards this\n -Knowledge and experience in design, manufacture and operation of some or all of the following: \nTrenchers, Cable/Pipe lay, LARS and bespoke onshore and Offshore equipment

The Interim Project Engineer will play a critical role in delivering engineering, capital, and improvement projects that support safe, efficient, and reliable food manufacturing operations. The role is based in Gateshead and requires a hands-on approach to ensure project goals are achieved effectively and efficiently.\n\nClient Details\n\nThe employer is a well-established organisation in the food manufacturing FMCG industry, with operations globally.\n\nDescription\n\nKey responsibilities for this interim Project Engineer role include:\n\nLead end to end planning, execution, and delivery of engineering projects (capex & opex) within scope, budget, and timeline.\nDevelop project scopes, feasibility studies, business cases, and ROI calculations.\nCreate and manage project plans, timelines, budgets, and resource requirements.\nCoordinate contractors, suppliers, and internal teams to ensure smooth project execution.\nMaintain accurate documentation, including risk assessments, drawings, change controls, and commissioning reports.\nDevelop engineering specifications, layouts, P&IDs, and equipment selection aligned with hygiene and food safety requirements.\nOversee installation, integration, and validation of new equipment, process lines, utilities, and automation systems.\nEnsure engineering work complies with food safety standards (e.g., HACCP, GMP, BRCGS), as well as relevant legislation (H&S, machinery directive, environmental).\nManage commissioning and performance testing to verify functionality and compliance.\nIdentify and deliver improvements in process efficiency, energy usage, reliability, and product quality.\nLead root cause analysis (RCA) and implement corrective actions to support operational teams.\nEnsure all engineering activities comply with H&S legislation, PUWER, LOLER, ATEX, and site safety standards.\nDevelop and maintain project-related risk assessments, method statements, and safe systems of work.\nEmbed hygienic design principles into all project work.\nAct as the project engineering contact with production, technical, maintenance, quality, and external partners.\nManage contractor performance, inductions, site access, and compliance with contractor control processes.\nProvide clear technical communication to all stakeholders, adapting detail to audience as needed.\nPrepare capex proposals, secure approvals, and track spend accurately.\nSource equipment and services, obtain competitive quotations, and manage vendor relationships.\nNegotiate contracts, warranties, service agreements, and technical support terms. \n\nProfile\n\nA successful Interim Project Engineer should have:\n\nDegree or equivalent in Mechanical, Electrical, Manufacturing, or Process Engineering (or related discipline).\nStrong knowledge of food manufacturing processes, production equipment, utilities, and hygienic design.\nExperience with: \nprocess design, line integration, and equipment installation\ncontrol systems/automation (PLC, SCADA, instrumentation)\nutilities: steam, compressed air, refrigeration, effluent, HVAC\nCAD software (AutoCAD/SolidWorks) and project management tools\nUnderstanding of food safety frameworks: HACCP, GMP, BRCGS, TACCP/VACCP.\nProven track record delivering multiple engineering projects in a fast paced manufacturing environment, including strong planning, scheduling, risk management, and organisational skills.\nAbility to manage contractors, suppliers, and multidisciplinary teams.\nCapex/budget management and commercial awareness.\nFamiliarity with: \nH&S legislation (HASAWA, PUWER, LOLER, RIDDOR)\nmachinery safety directives & CE/UKCA marking\nenvironmental compliance and waste/energy management\nAbility to produce safe work systems, RAMS, and project safety plans.\nExcellent communication with the ability to influence across functions.\nStrong problem solving skills and engineering curiosity.\nResilience and adaptability in a highly dynamic production environment.\nCollaborative team player able to drive change positively.\nHigh attention to detail and commitment to quality and safety. \n\nJob Offer\n\nCompetitive daily rate of £400-£550, depending on experience and IR35 status.\nOpportunity to work on a broad range of impactful projects in the FMCG industry.\nImmediate start, 3-6 month contract\nSite based role in Gateshead

MTrec’s new career opportunity\n\nWe are looking for an experienced and proactive Reactive & Planned Service Engineer to join our Fire, Security & TECS team. The successful candidate will be responsible for carrying out both emergency reactive call-outs and scheduled preventative maintenance across a range of life safety, security, and telecom systems.\n\nThis role requires strong fault-finding ability, excellent customer service skills, and the capability to work independently across multiple sites while maintaining high compliance and safety standards.\n\nThe Job you’ll do\n\n * Respond to emergency call-outs within agreed SLAs.\n\n * Be part of an out of hours support team.\n\n * Diagnose and rectify faults across fire, security, and telecom systems.\n\n * Provide temporary and permanent solutions to system failures.\n\n * Complete detailed service reports and documentation.\n\n * Communicate clearly with clients regarding system status and required remedial works.\n\n * Planned Preventative Maintenance (PPM):\n\n * Carry out routine servicing and inspections in line with industry standards and contracts.\n\n * Test and inspect fire alarm systems (conventional and addressable).\n\n * Service intruder alarms, CCTV (IP & analogue), and access control systems.\n\n * Maintain TECS including structured cabling, intercoms, and associated infrastructure.\n\n * Identify and report system deficiencies and recommend remedial actions.\n\n * Systems Experience\n\n * Fire Alarm Systems (BS5839 compliant)\n\n * Intruder Alarms\n\n * CCTV Systems (IP-based systems preferred)\n\n * Access Control Systems\n\n * Emergency Lighting (BS5266 compliant)\n\n * TECS / Structured Cabling / Door Entry Systems\n\nAbout You\n\nEssential:\n\n * Proven experience in servicing fire and security systems.\n\n * Strong fault-finding and diagnostic skills.\n\n * Knowledge of relevant British Standards and industry regulations.\n\n * Ability to work independently and manage workload effectively.\n\n * Full UK driving licence.\n\n * Good IT skills for digital reporting systems.\n\n * Excellent communication and customer service skills.\n\nDesirable\n\nFIA qualification or relevant fire & security certifications.\n\nECS/CSCS card.\n\nIPAF/PASMA.\n\nExperience with major manufacturers’ systems.\n\nKnowledge of SSAIB or NSI compliance requirements.\n\nPersonal Attributes.\n\nHighly organised and self-motivated.\n\nProfessional and client-focused.\n\nStrong attention to detail.\n\nCalm under pressure during emergency call-outs.\n\nFlexible with out-of-hours work and on-call rota.\n\nThe Rewards and the Benefits\n\nCompetitive pay.\n\nLow staff turner

We have a fantastic opportunity for an experienced Control Engineer to join our Control System Team. \n The successful candidate will design control & automation systems in the Offshore Energy sector; ensuring solutions clients' needs are met in a professional & timely manner. \n You will be responsible for: \nWriting specifications, developing PLC code & HMI/SCADA solutions for a variety equipment. \nProviding technical support during the construction phase of projects; including involvement in the commissioning & testing of equipment. \nEfficient management & prioritisation of workload. \nTaking ownership of the tasks assigned through to successful delivery within the specified time & budget. \nDelivering a high standard of work in line with our software quality control procedures. Job requirements: \nExcellent technical knowledge of Control, Automation and Safety Systems \nAppropriate Computer/Engineering related qualification (degree/HND) or comparable industrial experience \nRelevant experience in: \nDesign of control & automation systems \nProgramming of PLC, HMI & SCADA systems \nCommissioning & Testing of industrial control systems \nInvolvement throughout the whole project lifecycle, from design through coding to testing, installation and documentation \nWorking for clients in the marine, subsea, oil & gas and renewables market. \nRecent experience of a similar role in a bespoke engineering environment \nExperience of working to ISO9001 or equivalent in a project-based organisation. \nA high level of competence with IT systems and tools Desirable Skills / Attributes: \nExperience of Siemens TIA Portal / Unified (preferred) \nExperience of Rockwell or Mitsubishi platforms \nExperience of configuring & commissioning Variable Speed Drives (Siemens, Nidec & ABB) \nPrevious experience within the Marine / Offshore / Subsea environment \nKnowledge & experience of relevant functional safety standards (IEC61508, IEC61511, IEC13849)

Control System Engineer\nNorth East, UK\nSalary: £DOE\n\nJackson Hogg is delighted to be working with a leading offshore subsea engineering business which delivers offshore equipment to clients worldwide. It is a very exciting time to join this progressive team, as they are expanding their offices and looking to bring an experienced Controls Engineer that will work on their fast-paced, leading projects.\n\nControl System Engineer Key Responsibilities\n\n * Design control system circuits and documentation.\n\n * Develop PLC, HMI/SCADA systems and software.\n\n * Configure and commission inverter drives.\n\n * Checks and approves electrical schematics and calculations.\n\n * Review designs against DNV and/or other standards.\n\n * Contribute to sales proposals.\n\n * Liaise with suppliers.\n\nControl System Engineer Key Requirements\n\n * Experience in designing and commissioning safety automation and control systems for marine and/or hazardous environments.\n\n * Experience in PLC programming.\n\n * On-site commissioning and fault-finding experience.\n\n * Siemens TIA Portal experience.\n\n * Experience with DNV certification (optional).\n\n * Experience with SIL (optional).\n\nCompetitive package with excellent benefits is provided on offer.\n\nIf you are interested in this opportunity feel free to reach out using the details below

We are looking for an experienced engineer with a strong understanding of the project lifecycle from concept through to completion. In order to succeed in this role you'll need experience in the technical development of design documentation, configuration of PLCs, SCADA, HMI, Testing and commissioning.\n\nAs a business, their project solutions are based around Rockwell, Siemens, Mitsubishi, Wonderware, Schneider, SQL and various legacy technologies.\n\nOn a day to day basis you'll be responsible for the following activities:-\n\nWriting software from scratch for PLC programmes using Siemens, Rockwell, Mitsubishi or Schneider software.\nControl system software design and implementation\nProducing cutting edge solutions for process control systems clients in the food&beverage, chemicals, pharmaceuticals and utilities sectors.\nIndustrial ethernet network design and testing\nOn site installation, testing and process commissioning\nReal time control system design and commissioning\nControl System Software design and testing\nElectrical Control Panels and commissioning\nRockwell ControlLogix\nRockwell HMI (FTView ME & SE)\nSchneider ClearSCADA\nPLC Software - Rockwell, Siemens, Mitsubishi, Schneider\nHMI/SCADA systems :- Rockwell FTView ME and SE\nAVEVA InTouch and System Platform\nSchneider ClearSCADA\nGE iFIX\nSiemens WinCC

Position: Business Administrator\n\nJob ID: 1298/108\n\nLocation: Newcastle\n\nRate/Salary: £27,000 per year\n\nBenefits: Great benefits\n\nType: Permanent\n\nHSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit the HSB Technical website\n\nfor a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.\n\nThe below job description will outline this position of: Business Administrator\n\nTypically, this person will support administrative and operational functions across multiple departments, ensuring efficient scheduling, accurate commercial processing, and high-quality customer support. This is a varied role suited to someone who can manage multiple tasks, support engineers and internal teams, and maintain strong organisational standards.\n\nHSB Technical’s client is an established and well-regarded business entity.\n\nDuties and responsibilities of the Business Administrator:\n\n * Coordinate scheduling of maintenance activities and engineer visits\n\n * Ensure engineers have correct documentation, equipment, and site access\n\n * Prepare and process invoices, quotations, and service documentation\n\n * Create and manage work orders, purchase orders, and sales orders\n\n * Maintain accurate data across internal systems (ERP/Dynamics)\n\n * Process timesheets, expenses, and track training/certifications\n\n * Produce KPI reports and customer documentation within deadlines\n\n * Liaise with customers, engineers, and internal departments\n\n * Support compliance, documentation control, and quality processes\n\n * Manage inbound enquiries, emails, and general office administration\n\n * Assist with travel arrangements, warranty claims, and ad hoc admin tasks\n\n * Support continuous improvement of processes and workflows\n\nQualifications and requirements for the Business Administrator:\n\n * Previous experience in an administrative or coordination role\n\n * Strong IT skills (Microsoft Office essential)\n\n * Excellent communication skills, both verbal and written\n\n * Strong organisational skills with the ability to manage multiple tasks\n\n * GCSE Maths and English (or equivalent)\n\n * Professional, reliable, and customer-focused approach\n\n * Ability to work independently and as part of a team\n\n * Experience in scheduling, operations, or engineering environments (desirable)\n\nThis vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role

My Client is recruiting for a Senior / Principal Electrical Engineer in the Water Sector\n\nLocation: Newcastle or Leeds - Hybrid\n\nWe are seeking a Senior / Principal Electrical Engineer to strengthen our EICA design capabilities. Based in our Leeds or Newcastle offices, you will be a key contributor to multidisciplinary project delivery, taking ownership of the design process from initial optioneering and feasibility studies through to detailed design and commissioning support.\n\nIn this role, you will be responsible for leading the development of robust EICA solutions, encompassing the production of Single Line Diagrams, Block Cable Diagrams, and Network Infrastructure Diagrams. Collaboration is crucial: you will work seamlessly with Project Managers, Design Engineers, and external stakeholders (clients, contractors) to ensure your EICA input is fully integrated into multidisciplinary outputs, such as General Arrangement Drawings, 3D models, and P&IDs.\n\nFinally, you will act as a technical leader and mentor, guiding the development of junior engineers within the team.\n\nExperience and Qualifications:\n\nIdeally Chartered or Incorporated Electrical Engineer with a degree in Electrical Engineering (or a related discipline) and a proven background in EICA engineering design.\nExperience in developing comprehensive technical documentation, including control philosophies, technical specifications, and detailed EICA schedules, translating concept and outline designs into fully developed, constructible solutions.\nSkilled in communicating complex technical concepts through clear presentations and actively inputting into high-level design discussions.\nExperience in the Water/Wastewater sector ideally with experience working on UK Water Company projects and a good understanding of UK regulations such as WIMES

Fire and Security Engineer\n\nNewcastle and Surrounding areas\n\nUp to £42,000 depending on experience\n\nCompany van, overtime, holidays, Call out\n\nTo apply for this opportunity you must have or hold the following:\n\n• CCTV Service Experience )\n\n• Fire Knowledge (Advanced, kentech and morley would be useful)\n\n• Strong Intruder alarms\n\n• Excellent customer service skills\n\n• CCTV IP Knowledge also beneficial\n\n• Fault Finding experience\n\n• Installation experience\n\n• Ability to work by yourself and within a team\n\n• Full UK Driving license\n\nThis company is a well-established organisation in the Fire and Security industry. They offer a wide range of services including design, maintenance and installation of intruder systems, CCTV, and access control. Due to planned growth within the installation and service department, they are now actively looking to recruit an experienced Security Service/Installation Engineers Benefits Include:\n\n• Company Vehicle\n\n• Mobile Phone\n\n• Stand by Allowances\n\n• Call out Allowances\n\n• Generous Annual Leave\n\nIf you are looking for a new challenge and want to work for a forward thinking leading company Who will continue to expand and develop. Please contact George on the listed number (phone number removed) or ideally e-mail with a copy of your current CV

MTrec’s new career opportunity\n\nWe are seeking an experienced and proactive Small Works Engineer to deliver small works projects across TECS, fire alarm, intruder alarm, CCTV, access control, and life safety systems.\n\nThe Job you’ll do\n\n * Deliver small works ranging from minor installations and system upgrades to remedial works.\n\n * Maintain compliance with relevant British Standards, regulations, and company procedures.\n\n * Ensure health & safety standards are upheld across all small works activities.\n\n * System handover, commission and customer training.\n\n * Acceptance testing and quality assurance monitoring.\n\n * Provide customer or client-facing support where required.\n\nAbout You\n\n * Proven experience in fire and security systems, particularly small works.\n\n * Strong knowledge of TECS, fire alarms, intruder alarms, CCTV, and access control systems (multi-manufacturer).\n\n * Good understanding of BS5839, BS5266, EN50131, and other relevant standards.\n\n * Excellent organisational and planning skills with the ability to manage multiple projects.\n\n * Strong leadership, communication, and client-facing skills.\n\n * IT literacy (Microsoft Office, project management software).\n\n * Ability to produce accurate quotes and technical documentation.\n\n * Full UK driving licence.\n\nThe Rewards and the Benefits\n\n * Competitive pay.\n\n * Low staff turner

Title: Site Engineer - Civil Engineering (UK-Wide Projects) Location: UK & Ireland (Travel Required) Salary: Competitive + Full Benefits Package + Career Development\n\nThe Opportunity Are you a Site Engineer who takes pride in high-quality delivery? Search Consultancy is partnering with an industry-leading Civil Engineering contractor to find a dedicated Site Engineer for high-value projects across the UK and Ireland.\n\nThis is a role for an engineer who wants to be more than just a "setter-out." You will be given real responsibility, a collaborative team environment, and a clear pathway to Site Agent or Project Management roles.\n\nYour New Role You will take full accountability for the technical delivery of civil engineering works, ensuring everything is built to spec, on time, and safely.\n\nKey Responsibilities:\n* Technical Accuracy: Precise setting out and levelling using GPS and Total Station equipment.\n* Quality Control: Maintain the NCR register and ensure all drawings and contract documents are up to date.\n* Safety Leadership: Manage site inductions and ensure RAMS are strictly followed in line with SHEQ policies.\n* Project Planning: Collaborate with the Site Agent on short-term "look ahead" programmes and communicate risks to the management team.\n* Reporting: Produce weekly/monthly progress reports and maintain accurate daily records for labour, plant, and materials.\n\nWhat We're Looking For\n* Education: HND in Civil Engineering (BSc Hons is a plus).\n* Tech Skills: Proven experience with modern surveying equipment (GPS/Total Station).\n* Compliance: Deep understanding of SHEQ procedures and civil engineering best practices.\n* Flexibility: A full driving licence and a willingness to travel to project sites throughout the UK.\n\nWhy Join This Team?\n* Established Presence: Work for a company with a massive footprint and a "Values First" culture.\n* Legacy Projects: Be part of the team building the UK's future infrastructure.\n* Progression: They are committed to "Unlocking Potential"-your career won't stall here.\n\nSearch is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Control System Engineer - I am looking for a control system engineer to support a subsea client in the North East. \nWe are looking for profiles who can develop and maintain PLC (Rockwell) and SCADA software.\n\nPlease click to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement.\n\nTo find out more about Progressive please visit \n\nProgressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC(phone number removed) England and Wales

Principal Electrical Engineer\nNewcastle Upon Tyne\nSalary is DOE\n\nJackson Hogg is delighted to be working with a global leader in maritime technology for the appointment of a Principal Electrical Engineer. Operating at the forefront of marine innovation, the business delivers advanced control systems for naval applications across the defence, commercial, and offshore markets.\n\nRole Overview\n\nThis Principal Electrical Engineer will be responsible for the end-to-end delivery of high-integrity marine electrical equipment and control systems. From electrical design to supplier engagement and validation, this individual will act as a subject matter expert in naval-grade systems, playing a key role in technical governance and customer satisfaction across defence programmes.\n\nPrincipal Electrical Engineer – Key Responsibilities\n\n * \n\n Lead the design, specification, and testing of marine electrical systems and control equipment, ensuring all deliverables meet customer and regulatory standards.\n\n * \n\n Produce detailed technical drawings, schematics, and block diagrams using AutoCAD Electrical, EPLAN, or similar tools.\n\n * \n\n Create and maintain commissioning documentation, test plans, and technical specifications for motors, VSDs, control panels, and operator control stations.\n\n * \n\n Conduct electrical calculations including harmonic emissions and arc flash safety assessments.\n\n * \n\n Review and approve supplier documentation and ensure technical compliance across all components.\n\n * \n\n Support tendering processes with technical input, estimating, and bid compliance analysis.\n\n * \n\n Participate in structured problem-solving (e.g., FMECA, HAZOP) and contribute to R&D and continuous improvement activities.\n\n * \n\n Represent engineering in internal reviews, supplier engagements, and customer interface meetings.\n\n * \n\n Ensure design configuration control through effective documentation and data management systems.\n\n * \n\n Champion quality, safety, and performance across engineering workstreams.\n\nPrincipal Electrical Engineer – Key Requirements\n\n * \n\n BEng or BSc in Electrical Engineering, Control Engineering, or a related discipline – or equivalent practical experience in a regulated engineering environment.\n\n * \n\n Proven track record of delivering complex engineering solutions in marine, defence, or similarly regulated sectors.\n\n * \n\n Proficiency in 2D electrical CAD platforms (AutoCAD Electrical, EPLAN) and control panel layout design.\n\n * \n\n Strong understanding of AC/PM motor control systems, VSD technologies, and EMC/harmonics management.\n\n * \n\n Competent in design verification and validation methodologies.\n\n * \n\n Working knowledge of defence/maritime compliance frameworks and marine classification requirements.\n\n * \n\n Excellent communication, stakeholder management, and technical reporting skills.\n\n * \n\n Comfortable interfacing with suppliers, customers, classification societies, and defence authorities.\n\nThis is a permanent, hybrid role offering flexible working arrangements and long-term career progression within a business that sets the global standard in maritime control systems.\n\nIf you are interested in this opportunity, please apply now or contact Eleni Avgenaki at Jackson Hogg for a confidential discussion

Zenith are proud to be partnering with a leading North East manufacturer and supplier as they seek an experienced Electrical Site Services & Facilities Maintenance Engineer to support their nationwide customer base. This role is ideal for an engineer with strong electrical skills and Project experience.\n\nBased at the North East Site with regular UK-wide travel, you will play a key role in ensuring customer facilities and equipment remain safe, compliant, and fully operational. You will support refurbishment projects, testing, commissioning, and ongoing maintenance of both the company’s equipment and wider site services.\n\nKey Responsibilities\n\n * Conducts site-based maintenance, repair, and installation of building fabric systems including electrical infrastructure, and general facilities equipment.\n\n * Performs diagnostics, fault-finding, and corrective repairs to Control Systems ensuring compliance with safety and performance standards.\n\n * Supports refurbishment and upgrade projects across customer sites, including equipment overhaul, system testing, and commissioning.\n\n * Provides technical support to customers, project teams, warranty investigations, and quality control functions.\n\n * Works directly or through site supervisors, engineers, and approved subcontractors to deliver planned and reactive maintenance.\n\n * Carries out modifications, repairs, and system improvements at customer facilities across the UK and occasionally overseas.\n\n * Produces clear technical instructions and guidance for site teams and subcontractors relating to installation, operation, and maintenance activities.\n\n * Maintains accurate service records, site reports, and documentation for all work undertaken.\n\n * Conducts site surveys, prepares RAMS, and contributes to pricing and quotation development.\n\n * Acts as a key point of contact for customers, ensuring smooth coordination of work and high service standards.\n\n * Provides on-site training and support to supervisors, clients, and end users.\n\n * Supports the engineering team with R&D and product development when required.\n\n * Understands and adheres to company policies on Health & Safety, Quality Assurance, Environmental Standards, and travel/subsistence requirements.\n\n * Willingness to work occasional weekend overtime as required.\n\nThe Person We’re Looking For\n\n * Strong IT skills, confident using Microsoft Office.\n\n * Solid understanding of Health & Safety within site services and facilities environments.\n\n * Supervisory or team-leading experience is advantageous.\n\n * Excellent communication skills, both written and verbal, with the ability to engage effectively at all levels.\n\n * Practical experience working with Site Facilities\n\nQualifications & Experience - Essential\n\nElectrical Engineering Degree / HNC / HND (or equivalent) with knowledge of Control Systems Previous Experience carrying out Electrical Maintenance & modifications to Controls on site facilities.\n\nAdditional building services qualifications are advantageous.\n\nPackage\n\nRegular overtime available National travel with accommodation paid Company vehicle provided If this sounds like an opportunity you might be interested in please click apply now

Commissioning and Service Engineer \n\nInternational Travel\n\nUp to £70,000 DOE + 25 Days Holiday and Bank Holiday + Company Pension + Laptop + Phone \n\nCommissioning and Service Engineer required for a market leading international engineering company who are committed to supporting their customers. This company provide custom built solutions for air pollution control issues. The company can offer full product training and offer scope for future development and career progression. This is an ideal opportunity for someone looking for the opportunity to travel with work. \n\nThe successful Commissioning and Service Engineer will be multiskilled, confident mechanically and electrically and can come from any engineering background. It would be advantageous to have experience in a commissioning and/or service-based role, however, candidates from a manufacturing plant maintenance background will be suited. The successful candidate will need experience working with PLC's and will need to be able to write and edit program modifications.\n\nThe successful Commissioning and Service Engineer will be responsible for startup and commissioning, service inspections and resolving technical issues with air pollution abatement systems, including thermal oxidisers. You can expect to spend approximately 90% of your time at customer sites and will need to be prepared to spend up to three weeks at a time on site, depending on the length of project when commissioning equipment, and three to four days when servicing. \n\nCommissioning and Service Engineer Role: \n\n· Inspection, commissioning and full start up of air pollution control equipment, including thermal oxidisers\n· Check new or modified equipment to ensure full and safe functionality \n· Working with gas fired combustion systems \n· Analyse and review inspection findings to determine problem and recommend corrective actions. \n· Working with PLCs to validate performance and troubleshoot operational issues.\n· Offer technical assistance to site either in person or remotely. \n· Maintain performance records \n· Frequent travel to customer sites in the UK and internationally \n\nCommissioning and Service Engineer Candidate: \n\n· Multiskilled – confident mechanically and electrically\n· Experience writing and editing PLC programs\n· Any service, commissioning, or maintenance background\n· Able to read and understand wiring schematics and diagrams

Internal Technical Sales Engineer Industrial Electrical Control & Automation\n\nNegotiable Salary Package, Pension, and other benefits.\n\nOur Client has a requirement for an Internal Sales Engineer with experience in Electrical control and automation to provide sales and technical support to the external customer base, whilst developing and maintaining customer relationships and promoting products and services to maximise sales opportunities. You are most likely to be living in North of the Tyne area, including, North Shields, Whitley Bay, Wallsend, Longbenton, Jesmond, Cramlington, Blyth in order to commute. Ideally you will have knowledge of a wide range of electrical market related products and are likely to have strengths in more than one product area. This could be industrial electrical, control & automation/factory automation/process control including control gear, switchgear, automation equipment, variable speed drives, plc, hmi, instrumentation, cable management systems, connection systems, industrial data comms enclosures, sensors, and possibly ATEX equipment.\n\nAs the Internal Sales Engineer you will respond to and handle all product technical enquiries. You will be required, with training, to understand and be familiar with the full product range with the ability to offer alternatives if required and advise on the selection of products where possible. You will liaise with Field Sales Engineers and other staff to achieve the branch objectives and sales performance and as is normal in a small team environment engage in other duties. It is also expected that you have commercial ability and awareness to generate quotation for customers and are competent to judge the competitive situation needed to win the order whilst being mindful of profitability.\n\nIn order to perform this role successfully you will need technical electrical knowledge, there is flexibility on the qualification if you can illustrate your knowledge, product applications knowledge and commercial awareness. The ideal candidate may already be in a similar role as an internal sales engineer, technical support engineer, an electrical engineer looking to move into a commercial environment with the ability to illustrate good customer and administrative skills, or a graduate engineer with customer experience in a sales environment looking to develop their career in technical sales.\n\nKnowledge and Experience\n\n * GCSE Maths and English (or equivalent)\n\n * None mandatory but relevant knowledge and experience must be demonstrated or possibly ONC/HNC in Electrical engineering (or other electrical engineering qualification)\n\n * Good working knowledge of Microsoft Office and data entry systems\n\n * Full clean driving licence\n\n * Experience in similar sales /customer service environment.\n\n * Experience with an electrical engineering role, or a background in electrical distribution would be an advantage.\n\nPost codes used are for advertising purposes only.\n\nTo register your interest contact us with an up to date CV and we will be pleased to call you for a confidential discussion. To view more of our positions click on the Rise logo at the top of this page or visit our website directly.\n\nWe work across a range of business to business/B2B market sectors including Renewable Energy, Electrical, Control & Automation, Electronic, Renewable Energy, Pneumatics, Hydraulics, Fluid Power, Instrumentation, Engineering services companies, Industrial Consumables, Industrial Components, Capital Equipment, Material Handling, Scientific Equipment, Petrochemical and Utilities.\n\nRise Executive Search & Recruitment Ltd are currently working on a wide range of business to business/B2B sales positions, account management, business development and sales management roles including: Internal Sales Engineer, Technical Support, Product Specialist, Sales Manager, UK Sales Manager, National Sales Manager, Country Manager, Regional Sales Manager, Area Sales Manager, Sales Executive, Senior Sales Executive, National Account Manager, Business Development Manager, Key Account Manager, Account Executive, National Account Executive, Sales Specialist, Global Account Manager, Sales Representative, Territory Sales, Field Sales, Client Relationship Manager, Sales Engineer, Sales Consultant, Technical Sales, Senior Sales Engineer, Export Sales, International Sales, European Sales, Branch Manager, Sales Director, Trainee Sales, Graduate Sales, Telesales, Internal Sales, Office Sales

Lead E&I Engineer\n\nNewcastle Upon Tyne\n\nSalary: up to £65,000 basic + benefits\n\nJackson Hogg is delighted to be working with a leading engineering consultancy to bring a Lead E&I Engineer to take ownership of Electrical & Instrumentation delivery across complex engineering projects.\n\nThis is a permanent, full time on site role based in Newcastle.\n\nLead E&i Engineer Key Responsibilities:\n\n * \n\n Lead the delivery of the E&I scope to agreed time, cost, and quality targets\n\n * \n\n Provide technical and people leadership to E&I engineers and designers\n\n * \n\n Own E&I engineering schedules, deliverables, and progress reporting\n\n * \n\n Manage E&I manhour budgets, resourcing levels, and workload planning\n\n * \n\n Ensure all E&I designs comply with legislation, industry standards, and client specifications\n\n * \n\n Control and manage scope change in line with formal change management procedures\n\n * \n\n Maintain technical integrity and accuracy across all E&I deliverables\n\n * \n\n Participate in and contribute to HAZID, HAZOP, safety, and design reviews\n\n * \n\n Provide guidance on hazardous area installations, including ATEX compliance\n\n * \n\n Ensure all documentation is checked and approved in line with company procedures\n\n * \n\n Support tendering activities, including scope definition and CTR generation\n\n * \n\n Coach and develop Engineers, Graduates, and Trainees within the discipline\n\nLead E&I Engineer Key Requirements:\n\n * \n\n HNC or higher in Electrical or Instrumentation Engineering\n\n * \n\n Significant experience delivering E&I engineering on Oil & Gas brownfield projects (Feasibility, Concept, FEED, EPC)\n\n * \n\n Proven experience leading E&I engineering teams on projects\n\n * \n\n Strong working knowledge of industry codes, standards, and legislation\n\n * \n\n Experience with manhour control, cost awareness, and change management\n\n * \n\n Solid understanding of hazardous area design and ATEX directives\n\n * \n\n Experience contributing to HAZOP, HAZID, and constructability reviews\n\n * \n\n Excellent communication and stakeholder management skills\n\n * \n\n Strong commercial awareness and ability to operate at project leadership level\n\nDesirable\n\n * \n\n Degree in Electrical or Instrumentation Engineering\n\n * \n\n Chartered status (CEng / MIET)\n\n * \n\n SIL experience\n\n * \n\n Offshore experience and/or offshore survey exposure\n\n * \n\n BOSIET certification\n\nIf you are interested in this opportunity please contact Eleni at (phone number removed)

As an experienced Service Engineer reporting to the Service Manager, you’ll undertake preventative maintenance, servicing and repair for all types of company products and commissioning across the UK. Covering a wide range of applications and in addition to supporting the customers, you will be providing technical support over the telephone. Tasked with providing product improvement and new sales opportunity feedback, you’ll need to communicate effectively with your colleagues in field service planning, commercial and engineering departments.\nYou will need to have experience of working with building management systems (in particular control systems) construction sites and a flexible can-do approach.\nOther accountabilities as Service Engineer will include:\n* Dealing confidently and professionally with customers on-site\n* Reporting accurately on all service visits, with accountability for component stock\nInstallation and commissioning of company products\nWorking on a variety of different construction sites\nManaging own van stock\n*Experience of building management control systems from a variety of services, this could be from HVAC products, lighting, power generators, heating/ventilation units to name a few.\nThe ideal candidate will have a hands on background from the building services sector and be time served within this field. You will ideally have a relevant Mechanical or Electrical qualification and a recognised HVAC qualification is desirable. Your experience could have potentially come from a variety of industries, electrical installations, commissioning of building services or the integration of HVAC products. This role is about finding the right individual who has a mindset to be motivated to deliver excellent customer service with a problem solving attitude. A strong all-round communicator, self-motivated and able to both work alone and as one of a team, you will also have a full valid driving licence as a company vehicle is included in the package. (This can be used for personal use at an additional tax cost)\nPlease be aware this role covers clients within the UK so the ideal candidate could be located within a commutable distance from anywhere central. The role will include over night stays to cover the UK client base, covering annual leave or a potential large scale project. Over time and over night payment expenses are on top of salary listed with one day working from home each week (Friday) Please call/apply to discuss the full salary scope of the package.\nThe client will provide full, on-the-job product training.\nThe salary is based on the experience of the candidate so please get in touch to discuss your skill-set in more detail and the flexibility regarding the salary

MTrec’s new career opportunity\n\nWe are seeking a skilled and motivated Fire & Security Installation and Commissioning Engineer to join our growing team. The successful candidate will be responsible for the installation, commissioning, and handover of fire detection, security, and life safety systems across commercial, industrial, and residential sites.\n\nThis role requires strong technical expertise, excellent problem-solving skills, and the ability to work independently while maintaining high standards of safety, quality, and customer service.\n\nThe Job you’ll do\n\n * Installation and commissioning of:\n\n * Fire alarm systems (conventional and addressable).\n\n * Intruder alarm systems.\n\n * CCTV systems (IP and analogue).\n\n * Access control systems.\n\n * Reading and interpreting technical drawings and system designs.\n\n * Testing and fault-finding on newly installed systems.\n\n * Completing commissioning documentation and certificates.\n\n * Providing client demonstrations and system handovers.\n\n * Ensuring all works comply with relevant British Standards and industry regulations.\n\n * Liaising with project managers, clients, and other trades on site.\n\n * Maintaining tools, equipment, and company vehicle in good condition.\n\n * Adhering to health and safety procedures at all times.\n\nAbout You\n\nEssential:\n\n * Proven experience installing and commissioning fire and/or security systems.\n\n * Strong knowledge of fire alarm systems (e.g., conventional & addressable panels).\n\n * Experience with CCTV, access control, and intruder systems.\n\n * Ability to read technical drawings and wiring diagrams.\n\n * Excellent fault-finding skills.\n\n * Full UK driving licence.\n\n * Good communication and customer service skills.\n\nDesirable:\n\n * FIA or relevant fire and security qualifications.\n\n * ECS/CSCS card.\n\n * IPAF/PASMA certification.\n\n * Experience with major manufacturers’ equipment.\n\n * Knowledge of current BS5839, BS5266, and SSAIB/NSI standards.\n\n * Personal Attributes.\n\n * Self-motivated and able to work independently.\n\n * Strong attention to detail.\n\n * Flexible with working hours when required.\n\nThe Rewards and the Benefits\n\nCompetitive pay.\n\nLow staff turner

An excellent opportunity for an experienced Project Design Engineer to join a well-established company based in Birtley, Gateshead.\n\nJob Type: Full-Time, Permanent.\n\nLocation: Gateshead.\n\nSalary: Starting from £37,000 per annum\n\nAbout the Role:\n\nThe company’s Design Engineers are responsible for technical project delivery of hydraulic systems. Their duties are to design, plan and deliver projects to meet customer needs. The scope of the engineering builds may include hydraulic power units, control consoles, bespoke hydraulic systems, and manifolds.\n\nThe project owner will be responsible for providing the technical information and documentation to the customer, suppliers, sub-contractors and our hydraulic technicians. They will be maintaining constant communication with the customer and ensure that all commercial, technical, and financial targets are met.\n\nAs part of this role there is an expectation that the project owner will have presence in the workshop and on- site and may be involved in activities such as mechanical assembly and commissioning.\n\nThis position will be a varied and challenging role with positive opportunities for a motivated individual to develop the position to achieve their own career goals.\n\nMain Duties:\n\nCommunication with customer\n\nReview and clarify customer requirements\n\nPrepare engineering drawings and hydraulic schematics\n\nPrepare quotations and technical specifications\n\nCarry out engineering calculations\n\nSelect and size components to optimise system performance and cost\n\nResolve problems and improve manufacturability and serviceability of products\n\nPrepare technical specification for sub-contractors\n\nPrepare technical documents for work files such as, work instructions & risk assessments, mechanical and electrical drawings, hydraulic schematics, technical procedures, and reports\n\nSupport technicians and engineers during testing and commissioning\n\nControl work after completion and issue the as-built final documents\n\nEnsure compliance with customer requirements\n\nEnsure that project financial targets are met\n\nReview the project KPIs for debriefing\n\nAttend site or workshop when required\n\nSupporting in all areas of work where appropriate\n\nEmbrace and support company values\n\nCandidate Requirements:\n\n2:1 Bachelor degree or equivalent in mechanical engineering\n\nMinimum 3 years’ experience\n\nAbility to carry out engineering calculations\n\nKnowledge of hydraulic, mechanical, and electrical/control system\n\nTime management skills to handle multi-tasking\n\nUnderstanding of manufacturing processes and construction methods\n\nGood knowledge of computer assisted design (CAD) software – Autodesk Inventor preferred\n\nInterest in working both in a desk and workshop environment\n\nCreative approach for generating new ideas\n\nStrong background in math and science\n\nClear communicator both written and verbal\n\nSkilled in Microsoft Office packages including Excel and Word\n\nEligible to work permanently in the UK.\n\nFull driving license\n\nKPI’s:\n\nOn time, specification and in budget delivery of own projects at all time\n\nEnsure compliance of designs to customer specification and standards at all time\n\nPreparation of tenders and quotations on time with at least 10% conversion rate.\n\nIf you feel that you have the relative skills/attributes to fulfil this role then please apply now!\n\nThe employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need

Audio Visual Engineer Field-Based, covering North of England & Scotland Salary: £35,000 – £40,000 + Benefits Company van, fuel card, tools, expenses covered Lorien is working with an established and fast-growing organisation to recruit an AV Engineer to support the delivery, installation and ongoing maintenance of AV systems across a large, critical infrastructure estate. Working closely with Project Managers, Design Engineers and the wider delivery team, you will be responsible for installing, servicing and maintaining AV systems across a large portfolio of live operational environments. You’ll be involved post-design, interpreting schematics and installation documentation, carrying out hands-on installation work, and supporting reactive and planned maintenance where required. The role is client-facing and requires a professional, calm and solutions-focused approach when working on live sites. This will suit an experienced, self-sufficient engineer who enjoys customer-facing work and can take ownership of installs and fault resolution on site. Key Responsibilities • Install, configure and commission AV systems in line with design documentation, • Read and interpret schematics, drawings and installation instructions, • Build and wire AV racks to a high standard, • Carry out structured cabling and termination, • Diagnose and resolve faults across audio, video and control systems, • Perform planned maintenance and reactive support on deployed systems, • Work collaboratively with Project Managers and Design teams on larger projects, • Engage professionally with end users and site stakeholders, • Occasionally support national projects where overnight stays may be required, • Adhere to health & safety and site compliance requirements. What We’re Looking For • Proven experience as an AV Engineer, Installation Engineer or Service Engineer, • Strong practical knowledge of rack building, cabling and termination, • Confidence in fault-finding and diagnostics of AV systems, • Comfortable working independently and managing your own workload, • Experience working in customer-facing or live operational environments, • Full UK driving licence, • Willingness to travel within the North as part of a field-based role Nice to Have Industry certifications (CTS, CTS-I, CTS-D) What’s on Offer Salary up to £40,000, flexible depending on experience Company van + Fuel card Tools, equipment and consumables provided Expenses covered for travel and overnight stays Supportive, established engineering and project delivery function Long-term opportunity within a growing organisation with future regional expansion plans

The Opportunity Join a newly established consultancy at the foundational stage. We are looking for an exceptional, hands-on senior engineer to help define our technical culture. We value curiosity, ownership, and the "extra mile" mindset required to solve complex challenges for our clients. Core Responsibilities • Automation: Drive end-to-end infrastructure and environment automation., • CI/CD Ownership: Manage and evolve our Continuous Integration pipelines., • Observability: Develop advanced monitoring and diagnostics to ensure system health., • Delivery: Build and deploy bespoke automation solutions for end-users. Technical Profile • Automation & Code: Expert PowerShell/scripting. Prior developer experience (C#, Java, or Python) is highly valued., • Hybrid Infrastructure: Deep Windows & Linux administration. Strong VMware (vSphere) and SAN experience is essential for our on-prem delivery., • Tooling:, • IaC: Ansible, Terraform, or equivalent., • CI/CD: TeamCity, Octopus Deploy, and Artifactory., • Containers: Docker and Kubernetes/Swarm., • Data & Monitoring: Microsoft SQL Server management; ELK or Grafana for telemetry., • Quality: Experience with Static Analysis (SonarQube) and Workload Automation (Control-M). Experience & Requirements • Senior Hands-on Expertise: Extensive experience designing and building enterprise-grade infrastructure. You should be as comfortable in a rack room or a shell as you are in a design workshop., • Academic Excellence: Minimum 2.1 degree in Computer Science or a STEM field, ideally from a Russell Group University. We value the first-principles thinking this background provides., • Communication: Ability to navigate client-facing environments, translating complex infrastructure hurdles into professional, clear updates., • Industry: Financial Services experience is a significant bonus.

Senior Protection & Control Engineer Contract – Outside IR35 Substation Refurbishment Programme Overview We are seeking an experienced Senior Protection & Control Engineer to support a programme of substation refurbishment works across multiple 33kV sites. This role combines site-based survey work with protection design responsibilities, requiring an engineer who is comfortable assessing existing installations on site and translating those findings into clear protection design and documentation. The successful candidate will play a key role during the early survey and design phases, ensuring protection schemes are correctly assessed, documented and prepared for installation. Immediate start available. Key Responsibilities • Carry out site surveys across multiple 33kV substations to assess existing protection and control infrastructure, • Review existing protection schemes, relay configurations and associated drawings, • Produce or update protection design documentation and schematics based on survey findings, • Support development of protection and control design packages for refurbishment works, • Provide technical input during early project delivery and installation phases, • Work closely with project engineers and delivery teams to ensure compliance with UK network standards and engineering practices, • Identify potential design or installation challenges during survey phases and propose solutions Required Experience • Experience working on 33kV–132kV substations within DNO or transmission networks, • Strong Protection & Control engineering experience within power transmission or distribution environments, • Experience conducting substation site surveys and asset assessments, • Ability to produce or review protection design documentation and technical drawings, • Strong understanding of protection schemes, relays and substation control systems, • Experience working within utility, transmission or substation contractor environments Desirable Experience • Experience supporting substation refurbishment or upgrade programmes, • Familiarity with protection relay platforms such as GE Multilin, Siemens SIPROTEC, ABB / Hitachi Relion or Schneider MiCOM, • Experience with protection testing, commissioning or relay configuration Contract Details • Contract position – Outside IR35, • Competitive day rate £750–£950 depending on experience, • Immediate start available (within approximately two weeks)

WANT TO TAKE YOUR CONSTRUCTION CAREER TO AUSTRALIA...? • Site Engineer, Project Engineer, Section/Senior Engineer, Sub-Agent, or Site Manager?, • Under the age of 35 in Scotland/the UK/Ireland?, • Experience in civil engineering projects, or working with a large main building contractor?, • Ever considered heading to Australia? Then you need to apply/get in touch - let us walk you through how to make this move a reality! Contract Scotland/CS International Recruitment work in partnership with PD Project Delivery, an Australian construction and project management company providing civil engineering & construction management expertise to successful projects throughout Australia. They deliver everything from roads/highways, rail, water, renewables, to bulk earthworks/groundworks, etc! If the above profile sounds like you (either experience in the civil engineering site/project environment, or relevant experience on large building projects - externals, piling, concrete frames/slipform, etc), then you could have your visa for Australia in 24 hours and be on your way to a new challenge Down Under. We’ve already placed a large number of Engineers from Scotland/the UK who also made the move and we can share their recorded experiences with you, before assisting you on the same journey. Plus PD Project Delivery’s leadership team includes people from Scotland/the UK who originally relocated to Australia over a decade ago, so they understand what is involved in relocating from the UK and are set up to support anyone making the move. Work is predominantly across Queensland, including Brisbane, Gold Coast, and Townsville etc, but projects do arise in other states, such as New South Wales, Western Australia, Victoria, South Australia, and the Northern Territory. With massive investment into infrastructure projects, the major projects pipeline continues to grow. Take Queensland (Brisbane/Gold Coast) alone as a single state - the current five-year pipeline has increased to $103.9bn (of which $65bn is already funded)! As a Project Engineer in Australia, you’ll be; • Coordinating all aspects of projects and delivering key construction requirements in line with safety, quality, budget & time., • Conducting site inspections and ensuring quality control, • Attending project meetings, preparing progress updates, and maintaining clear communication with clients., • Overseeing project timelines, budgets, and resource allocations, • Providing technical expertise and support to project teams, • Keeping track of and reporting project progression, identifying potential risks, and devising strategies for risk mitigation. Get in touch now and we can discuss how you can start your very own adventure down under!!

Associate HV Power Engineer - Data Centres & Power Sector High Voltage Systems, Substations, Transmission, Distribution, Grid Connections Manchester or Glasgow Competitive salary + employee ownership, benefits and long term progression Full-time permanent role This position sits within the growing UK power division of a major global engineering firm with deep capability in power, data centres, infrastructure and complex buildings. The organisation has a long established reputation in the American market and is now significantly expanding its UK and European presence. The UK power team is building depth across transmission, distribution, substations and grid connection work. This includes internal delivery for hyperscale data centre clients, international power groups and a wider pipeline as they expand further into the DNO, TSO and grid studies environment. The combined scale, technical pedigree and employee ownership model makes this a compelling environment for an ambitious engineer looking to develop into senior leadership. This is a moment in time where strong engineers can step into a team that is gaining momentum and directly influence how capability develops over the coming years. The Business The organisation operates globally across power, data centres, infrastructure and major building programmes. With operations across the United States, the United Kingdom and multiple European regions, the business brings significant global scale and technical depth. The power group is well established internationally with large teams delivering high voltage substations, transmission and distribution programmes, grid connections and power systems studies for utilities, large private clients and major developers. Much of this capability is now being replicated and scaled across the UK. The company is employee owned, financially strong and aligned around long term engineering quality rather than short term commercial pressure. This creates a culture where technical standards, capability building and professional development are prioritised. The Role The Associate Power Engineer role is a key technical and delivery position within the UK power function. It is suited to engineers with strong grounding in high voltage systems such as substation design, transmission and distribution, protection and control, or grid connection studies. Your contribution will support senior technical leaders and help strengthen the division as it grows. You will work closely with internal global power teams, UK project managers and external clients across data centre and power infrastructure programmes. Technical Delivery • Supporting and leading elements of high voltage substation design, physical design, plant layout, earthing, protection and control and transmission or distribution interfaces, • Working on grid connection studies, power systems modelling and technical analysis where relevant to your background, • Producing designs, calculations, specifications and reports to support major internal and external clients Project and Team Capability • Delivering packages of work from concept through to detailed design, • Working with senior engineers to maintain technical quality and alignment with best practice, • Supporting design reviews and contributing to the technical direction of projects, • Helping develop junior engineers and strengthening capability within the UK team Collaboration and Growth • Working with Project Manager’s, Senior Technical Lead’s and wider global power teams, • Building long term relationships with internal and external stakeholders, • Supporting the development of the UK power capability as the division expands, • This role offers a balanced combination of hands on high voltage engineering, delivery responsibility and career development toward senior technical leadership What You Will Bring • Degree qualified electrical engineer, • Strong grounding in high voltage engineering through substation design, grid connection studies, power systems analysis or transmission and distribution design, • Familiarity with IEC, IEEE and relevant design standards, • Experience preparing calculations, designs and technical documentation, • Confidence working with multidisciplinary teams and engaging with clients or internal stakeholders, • A desire to be part of a growing UK division and contribute to long term capability building, • Experience with DigSILENT, IPSA, ETAP or similar tools is advantageous but not essential depending on background This position is suited to an Associate Engineer or experienced Senior Engineer who wants to step into a growing organisation, gain exposure to major data centre and power programmes and develop toward technical leadership. What Is On Offer The role sits within a power business that already has substantial work to deliver. The demand exists today, with internal clients in data centres and global power groups driving a strong flow of projects into the UK. You will join a team that is receiving significant investment in technical capability and leadership as it expands into the wider UK and European market. There is long term opportunity as the division grows from its current size into a larger, self sustaining business unit. You will have the backing of large global power teams, access to established technical standards and a highly collaborative culture shaped by employee ownership. The environment supports professional development, chartership and progression into senior roles as the team expands. For the right engineer, this is a rare chance to join at a formative stage and help build a high quality power engineering capability in the UK. If you’re looking to take the next step in your HV career, get in touch with Dean Forster at Tempest Jones on , or apply now with your CV.

Electrical Service Engineer Tower Cranes | Major UK Infrastructure Projects | £95,000 to £110,000 OTE We are recruiting on behalf of a leading tower crane manufacturer for experienced electrically biased engineers to work on large scale infrastructure projects across the UK. This role will focus on the installation, commissioning, maintenance and fault finding of tower cranes on high profile sites including Hinkley Point, Sellafield and Sizewell. Engineers must be based within reasonable travelling distance of these locations or be fully prepared to travel and lodge when required. The Role You will be responsible for: • Electrical fault finding on tower cranes, • Commissioning and decommissioning cranes, • Carrying out planned preventative maintenance, • Diagnosing and resolving PLC and control system issues, • Supporting breakdown response on live construction sites, • Ensuring all work is carried out in line with site safety procedures This is a technically demanding position working on complex lifting equipment in regulated, safety critical environments. What We Are Looking For • Strong electrical bias with experience on heavy plant, cranes or similar equipment, • Proven fault finding ability on control systems and electrical circuits, • Experience working on tower cranes is highly desirable, • Crane Supervisor tickets would be a significant advantage, • Comfortable working on major infrastructure or nuclear sites, • Full UK driving licence Engineers with experience on mobile cranes, crawler cranes, port cranes or other heavy lifting equipment are also encouraged to apply if they have a strong electrical background. Location Requirements You must be located near, or willing to travel to: • Hinkley Point C, • Sellafield, • Sizewell C Work will be project based, so flexibility to move between sites is important. Package • Realistic earnings between £95,000 and £110,000, • Overtime and site uplifts available, • Long term project work, • Opportunity to work on some of the UK’s most significant construction developments This is an excellent opportunity for a high level electrical engineer looking to move into, or continue within, the tower crane sector on major projects. ONLY APPLICANTS WITH CURRENT ELIGIBILITY TO WORK IN THE UK NEED APPLY AS NO SPONSORSHIP IS ON OFFER FOR THIS ROLE If you would like to discuss the role confidentially, get in touch.