Control systems engineer jobs in BathCreate job alerts

AIR CONDITIONING ENGINEER COMPANY OVERVIEW Our client is seeking a highly skilled and motivated Air Conditioning Engineer to carry out mobile maintenance works across Bristol, Swindon, and Cardiff. Their client base includes, but is not limited to, commercial office blocks, industrial units, retail sites, and student accommodation. We are looking for a candidate with strong knowledge of Air Conditioning systems and over 5 years' experience in a similar Electrical / HVAC / Maintenance Engineering role. COMPANY USP's Comprehensive M&E Maintenance Coverage Are you ready to apply Make sure you understand all the responsibilities and tasks associated with this role before proceeding. Our client provides a full spectrum of building services maintenance, including critical, non-critical, and preventative solutions. Their services encompass mechanical, electrical, plumbing, HVAC, water hygiene, and fire safety systems, ensuring optimal building performance throughout their lifecycle. 24/7 Nationwide Availability With strategic offices and service centres across the UK, our client offers round-the-clock support 365 days a year. This nationwide presence ensures rapid response times and consistent service delivery, regardless of location. Tailored Solutions for Diverse Sectors Our client specialises in providing customised facilities management solutions across commercial, industrial, retail, and public service sectors, addressing the unique challenges and requirements of each environment effectively. JOB RESPONSIBILITIES Perform planned preventative maintenance (PPM) and reactive maintenance on air conditioning systems, including VRV/VRF, split systems, and AHUs. Diagnose and repair faults in HVAC systems to ensure optimal performance and energy efficiency. Conduct system inspections, pressure testing, and leak detection in accordance with F-Gas regulations. Work on electrical systems related to HVAC units, including control panels, wiring, and fault finding. Maintain compliance with health and safety regulations, ensuring all work meets industry standards. Provide excellent customer service while liaising with clients, site managers, and contractors. Keep detailed service records and complete job reports promptly. Travel across Bristol, Swindon, and Cardiff to attend commercial, industrial, retail, and student accommodation sites. QUALIFICATIONS / EXPERIENCE F-Gas & ODS Regulations (C&G 2 Minimum requirement. Approved Apprenticeship in Air Conditioning - Advantageous. Strong knowledge of M&E building services. Knowledge of HVAC plant: A/C, boilers, controls, heating & cooling systems, ventilation. Good overall understanding of Health & Safety. SALARY / BENEFITS £40,000 - 42,000 + Overtime (OTE £50k) 33 days holiday Travel Time: 30 mins each way, then x1.5 overtime on all additional travel On-Call: 1 in 4 (approx. xrnqpay ) Company vehicle and fuel card Pension scheme Health and wellness benefits Ongoing training & professional development Opportunities for career growth within the organisation Please call Tom on for more information, and apply to this advert to prompt call back.

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 2023. There are no limits to where you can take your career. Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. At our GKN Filton site, we specialise in the design and manufacture of large complex structural wing assemblies, detailed metallic components and wing systems for a combination of both civil and military aircraft. We are seeking a Manufacturing Project Engineer to lead capital expenditure (CapEx) projects to deploy new production equipment, automated systems, and advanced industrial solutions within an aerospace manufacturing environment. Are you the right candidate for this opportunity Make sure to read the full description below. The successful candidate will manage the end-to-end lifecycle of CapEx projects including concept development, business case creation, budgeting, scheduling, and execution. The successful applicant will work a 4.5-day week, including flexitime in a full-time permanent capacity, equating to a 35 hour week as part of a small team of Manufacturing Engineers. How You'll Contribute The successful applicant will: • Prepare detailed equipment specifications that meet aerospace standards for precision, traceability, and repeatability. Design future processes implementing lean tools and methods in accordance with the GKN standard lean tool suite, • Coordinate supplier selection, RFQs, technical reviews, contract negotiations, and design verification, • Lead FAT (Factory Acceptance Test), SAT (Site Acceptance Test), commissioning, and full production readiness validation, • Ensure new equipment meets aerospace requirements such as NADCAP, AS9100, and internal engineering specifications. Validate equipment and processes through capability studies (Cp/Cpk), PFMEA, control plans, and process documentation, • Utilize root cause analysis, preventative and corrective action to reduce/eliminate non-conformances, • Ensure the delivery of expected benefits by driving projects to completion, on time and on budget, validating performance outcomes, and confirming that all operational, financial, and strategic objectives are fully achieved, • Build meaningful, lasting relationships with highly skilled operators, ensuring that any systems or equipment introduced are both appropriate and embraced, • Work closely with Production, Quality, Engineering, EHS, and Supply Chain teams to ensure seamless industrial deployment, • Maintain positive, team relationships with internal and external customers, as well as co-workers, • Continuously improve production and internal processes by implementing Lean initiatives, • Exemplify a safety-first mind-set and ensure compliance with the GKN Aerospace Health, Safety and Environmental policies and standards Essential: • Certifications: PMP/Prince2, • A Competitive Salary, • Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis (Totalling 20% Contribution), • Life Assurance 8 x salary, • 25 days holiday + bank holidays, • Flexible working hours including the ability to finish at 12noon on a Friday, • Income protection, • Shopping discounts, • Cycle To Work Scheme, • Employee Assistance Programme, • Virtual GP Clinic for you and immediate family Well offer you fantastic challenges and amazing opportunities. xrnqpay This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go?

1822/1823/1824CW Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. Location: Derby / Stafford / Grangemouth Join Our Team as a Senior System Integration Engineer – Lead the Future of Infrastructure Innovation! Are you passionate about integrating cutting-edge control systems and driving technological advancements in vital infrastructure projects? We are seeking a skilled Senior System Integration Engineer to join our dynamic team, overseeing the design, development, testing, and commissioning of complex control solutions across water, power, and industrial sectors. This pivotal role offers an exciting opportunity to influence major infrastructure projects, enhance system reliability, and work with industry-leading technologies. Key Skills & Qualifications: • Extensive experience with Siemens (and ideally Rockwell) hardware and software systems, • Strong background in Water and Wastewater treatment sectors, • Proven track record managing complex control system integration projects, • Skilled in interpreting client standards and user requirements, • Ability to reverse engineer existing control software with precision, • Excellent communication, time management, and project coordination capabilities, • Commercial awareness and a proactive problem-solving mindset, • Experience with SCADA and HMI development, • Knowledge of programming standards and cybersecurity for control systems, • Degree in Electrical, Controls, or Mechanical Engineering or related field, • Flexibility to travel as needed to project sites across the UK

FM33268 The experience expected from applicants, as well as additional skills and qualifications needed for this job are listed below. Electrical Generation Engineer - CHP Up to £50,000 (DOE) South of England Alecto Recruitment is working with a leading power generation and energy company who are seeking an Electrical Generation Engineer to support electrical maintenance, commissioning, and system optimisation across sites in the South of England. Key Responsibilities & Tasks • Carry out electrical maintenance, fault finding, and repair on generation assets and control systems., • Support commissioning, testing, and integration of new plant and facilities into operations., • Diagnose control system faults, including PLC logic and signal issues, and implement solutions., • Inspect, maintain, and operate LV/HV electrical equipment (subject to competency)., • Upgrade and replace control systems and electrical components where required., • Support and develop Operations staff through training, guidance, and supervision., • Ensure compliance with company procedures, NICEIC standards, and H&S legislation., • Manage electrical projects, including scoping works and supporting project delivery., • Maintain accurate documentation, reports, and commissioning records., • Strong experience in electrical maintenance, control systems, and commissioning., • Experience with CHP, gas engines, and/or solar systems., • Knowledge of generator control systems (e.g. CAT, MAN, MTU, etc)., • Experience with electrical systems (12V DC - 415V AC, 3-phase)., • Proven fault finding and PLC diagnostic skills., • 18th Edition and testing/inspection qualifications (2391 desirable)., • HV AP/SAP (desirable). To apply for this role please send your CV to or call ext 220 to discuss. xrnqpay Equally if this role would not be of interest to you but may be suitable friend or colleague, we can offer paid referral fees for successful placements.

Position: Electrical Project Engineer Location: Bristol Salary: £60,000 - £70,000 DOE My client is a leading Engineering Service Provider managing high-profile contracts within the FMCG sector across the UK. They are seeking a Electrical Project Engineer to take ownership of complex, multi-site projects. This is a high-impact role for a technically exceptional individual with strong commercial acumen, leadership skills, and proven expertise in delivering electrical projects to the highest standards. The successful candidate will combine advanced technical knowledge with strategic oversight, guiding projects from inception to completion, managing teams and subcontractors, and maintaining exceptional client relationships. Scroll down the page to see all associated job requirements, and any responsibilities successful candidates can expect. Electrical Project Engineer Job Overview • Lead the full lifecycle of commercial electrical projects, ensuring delivery on time, within budget, and to the highest quality standards., • Prepare comprehensive project quotes, balancing materials, labour, and resource requirements while identifying opportunities for efficiency and cost optimisation., • Design, configure, and optimise control system architecture, including PLC, HMI, and SCADA software (Siemens or Allen Bradley)., • Oversee the installation, commissioning, and troubleshooting of control panels and electrical systems., • Mentor and supervise engineering teams and subcontractors, fostering high-performance and accountability on site., • Drive continuous improvement initiatives and ensure all projects comply with relevant health and safety standards., • Degree, HND, or HNC in Electrical Engineering (or equivalent), • Extensive experience in control panel design, electrical installation, and commissioning, • Strong commercial project management experience, • Proven experience with PLC software development (Siemens or Allen Bradley), • Experience with FMCG / Pharmaceutical production environments, • IOSH / NEBOSH qualified would be beneficial, • Excellent leadership, communication, and stakeholder management skills, • £60,000 - £70,000 depending on experience, • Mileage paid, • 28 Days holiday inclusive of Bank holidays, • Mon - Fri: 08:00 - 17:00 Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

Protection & Controls Engineer (Design) Remember to check your CV before applying Also, ensure you read through all the requirements related to this role. Location: Bristol - Hybrid Reporting to: Lead Protection Engineer / Engineering Manager / Chief Engineer Role Overview We are seeking a Protection & Controls Engineer (Design) to deliver front-end and detailed desktop design of protection and control systems for UK electricity networks, including DNO and National Grid assets. The role focuses purely on design and technical assurance, no site, commissioning, SCADA, or operational control responsibilities. Key Responsibilities Develop protection philosophies in line with DNO / National Grid requirements Design and coordinate HV and EHV protection schemes Carry out fault level calculations, protection grading, and selectivity studies Apply protection schemes for transformers, feeders, busbars, generators, and cables Produce and review protection design documentation, including: Single line and protection single line diagrams Protection and control schematics Calculation and philosophy reports Ensure compliance with ENA Engineering Recommendations, National Grid specs, and IEC/IEEE standards Support design reviews, technical assurance, and supplier submission reviews Skills & Experience Strong experience with HV / EHV protection systems Knowledge of modern protection relays (ABB, Siemens, SEL, GE, xrnqpay Schneider) Experience producing high-quality, auditable design documentation Background working on UK DNO and/or National Grid projects (essential) Qualifications Degree in Electrical Engineering or equivalent Typically 3–7 years' experience in protection & controls design CEng or working towards IET chartership desirable Ideal for engineers who enjoy detailed protection design in a regulated UK power systems environment.

Job Title: Door Entry / Access Control Engineer (Commercial) Find out if this opportunity is a good fit by reading all of the information that follows below. Location: Bristol Salary: £38,000 £42,000 per annum (DOE) Job Type: Full-Time, Permanent About the Role We are seeking an experienced Door Entry / Access Control Engineer to join our growing commercial team covering Bristol and surrounding areas. The successful candidate will be responsible for the installation, servicing, maintenance, and fault-finding of door entry and access control systems across a range of commercial, social housing, and town centre properties. This is a fantastic opportunity for a skilled engineer looking for a stable, long-term role with excellent benefits and career progression. Key Responsibilities • Installation, servicing, maintenance, and fault diagnosis of door entry and access control systems, • Working on both new installations and reactive maintenance contracts, • Upgrading and commissioning systems to current industry standards, • Providing excellent customer service to clients and residents, • Accurate completion of job reports and documentation, • Minimum 5+ years experience working with intercom/door entry systems (ideally including ENTROTEC), • Minimum 5+ years experience working with access control systems (ideally including INTRATONE, PAC, and ENSIGN), • Strong fault-finding and diagnostic skills, • Full UK driving licence, • Experience working within social housing environments, • £38,000 £42,000 per annum (depending on experience), • 23 days annual leave + 8 bank holidays (1 additional day per year of service (up to a maximum of 25 days), • All parking costs and charges covered via company app or dedicated parking team, • Company van and fuel card (role dependent), • Pension: Peoples Pension 5% employee contribution, • HAPI Rewards App retail discounts and perks, • 24/7 Virtual GP access, • Employee Assistance Programme (EAP) for wellbeing support

1825 / 1826CW Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. Derby / Grangemouth Join Our Team as a System Integration Engineer Are you passionate about delivering innovative control system solutions and eager to work on impactful infrastructure projects? As a System Integration Engineer, you will play a critical role in designing, developing, testing, and commissioning control systems that support vital industries such as Water & Wastewater, Power & Energy, and more. This is an exciting opportunity to be part of a leading UK-based multidisciplinary contractor, supporting your growth while making a real difference in infrastructure services. Required Skills: • Hands-on experience with Rockwell, Mitsubishi, or Schneider control systems, • Strong background in Water & Wastewater treatment projects, • Proficiency in interpreting client standards and user requirements, • Excellent communication skills and solid project management abilities, • Practical, commercially aware approach to engineering solutions, • Industry-recognized training or qualifications in control systems engineering, • Willingness to undertake site visits across the UK

LB370 - Design Engineer Considering applying for this job Do not delay, scroll down and make your application as soon as possible to avoid missing out. Location: Clevedon Salary: Circa £65,000 Overview: First Military Recruitment are currently seeking a Design Engineer on behalf of one of our clients. Responsible for the design and maintenance of PCBs including hardware and firmware for the company range of thyristor and switch mode battery chargers. Working closely with all departments and managers to support the delivery of business success. Duties and Responsibilities: • New PCB hardware and firmware design as part of the Design and/or Project team., • Follows departmental processes relating to management of designs and the company-wide new product development processes., • Write specifications and technical reports., • Carries out detailed electronic circuit design, including simulation and design verification testing of the new design., • Carries out PCB layout of designs., • Selects new components/parts, taking into consideration obsolescence, availability and cost., • Preparation of manufacturing packs for all PCB designs., • Carries out detailed firmware design, including prototyping and design verification testing of the new design., • Prepares and presents electronic designs to other members of the design team and project stakeholders at design reviews., • All designs should follow DFM (Design for Manufacture) and DFT (Design for Test) principles, including PCB type testing, PCB manufacture testing and Charger level testing., • Participates openly in peer reviews of other engineer's designs., • Documents design work and prepares reports, ensuring design files and information are kept up to date and stored in accordance with company procedures., • Support existing production boards, dealing with hardware/firmware issues - involves working closely with the customer (internal or external) that flagged the issue., • Support existing production boards, dealing with component obsolescence/availability problems - involves working closely with purchasing, suppliers and external sub-contractors (such as CEM's - contract electronics manufacturers)., • Work closely with System and PCB Test assisting in developing and documenting test procedures for sub-systems and complete chargers., • Ensure all relevant safety regulations are met in design related activities/areas, including actively reporting near misses., • Attends training as required, develop skills and knowledge keeping up to date with latest technology., • May be required to supervise technicians, sub-contractors and interns., • Development projects may require interfacing to third party products and dealing directly with sub-contractor design teams., • Provide technical training on new products to all key departments, e.g. Service, System Test, Production, Engineering and Sales. Skills and Qualifications: • Wide knowledge of the range of PCB's and how the chargers work., • Schematic layout (OrCad)., • PCB layout (OrCad)., • Use of electrical test equipment such as PSU's, Load banks, DMM/DVM, oscilloscope/analysers, signal/function generators., • Microsoft Office products including OneNote, Word, Excel and Teams/SharePoint., • 123 Insight knowledge an advantage., • Good specification writing skills., • Use of version control software (SVN/Subversion)., • Methodical way of approaching design/test. xrnqpay, • Use of development boards and emulators to assist with embedded programming would be advantageous.

Project Engineer - Automation & Controls Apply fast, check the full description by scrolling below to find out the full requirements for this role. Bridgwater | £45,000 + bonus scheme | 37 per week, flexible working hours Introduction Acorn by Synergie is recruiting a Project Engineer specialising in Automation and Controls to join a dynamic manufacturing environment. This hands-on role combines project engineering, process improvement, and industrial control systems expertise to drive operational excellence. You will work closely with the Engineering Projects Lead and Technical Engineering team to support and enhance automated equipment, lead automation projects, and optimise production systems. Key Responsibilities • Act as the go-to expert for Industrial Control Systems (ICS), Automation, and Operational Technology on site., • Support, troubleshoot, and enhance existing automated, PLC-based, and data acquisition equipment, collaborating with automation partners and colleagues., • Lead delivery of Automation / Operational Technology projects from concept, specification, commissioning, validation, and production support., • Develop and maintain all necessary project documentation., • Analyse and improve manufacturing processes to increase efficiency, quality, and safety., • Ensure all work complies with safety, quality, and regulatory standards., • Collaborate with maintenance and production teams to integrate control system hardware and software., • HNC / HND in Engineering, Electrical Engineering, or equivalent., • Experience in automation and manufacturing environments, including process improvement., • Proficient in PLC & HMI programming (Siemens, Mitsubishi, etc.)., • Experience with industrial robotics integration (ABB, Kawasaki, etc.) preferred., • Experience with control panel wiring and devices., • Knowledge of OEE and data acquisition monitoring systems., • Understanding of CNC machines and machining centres (operation, not programming)., • Proficient with CAD software (Autodesk, SolidWorks)., • Strong problem-solving, analytical, and stakeholder management skills., • Ability to interpret mechanical and electrical drawings., • Project planning experience with the ability to meet deadlines., • Strong technical writing and documentation skills., • Hands-on and proactive approach., • Strong communicator able to work independently and collaboratively., • Detail-oriented with excellent organisational skills., • Competitive salary of £45,000 plus bonus scheme., • Flexible working hours within a 37-hour week., • Opportunity to lead impactful automation and control projects. Apply now to join a forward-thinking manufacturing team as a Project Engineer specialising in Automation & Controls. xrnqpay Acorn by Synergie acts as an employment agency for permanent recruitment.

Field Service Engineer - Inspection Systems (Food & Beverage) Please make sure you read the following details carefully before making any applications. We are working with a leading manufacturer of high-speed inspection and quality control systems used across the food, beverage, and pharmaceutical sectors. Location: Central England (Manchester across to Hull down to M4 corridor) Salary: £44,000 basic | OTE £55,000+ (overtime) | Company vehicle The Role: • Service, maintenance, and installation of inspection systems (vision, X-ray, fill level, leak detection), • Electrical fault finding on high-speed production and packaging equipment, • PPM and breakdown support across customer sites, • Formal qualification in Electrical Engineering (essential), • Electrical apprenticeship or equivalent hands-on training, • Strong interest in fault finding and developing technical skills, • Comprehensive training programme including regular trips to Germany, • Clear progression pathway into senior engineering and specialist roles, • Ongoing support and development within a structured engineering team, • Looking to build a long-term career within a specialist OEM environment, • Motivated to learn and develop technically, • Comfortable working independently after training, with support available WR is acting as an Employment Agency in relation to this vacancy.

Power System Studies Engineer (PSCAD) - Bristol If you are interested in applying for this job, please make sure you meet the following requirements as listed below. Aurora Power Consultancy is currently seeking an experienced Power System Studies Engineer to join their growing team in either their Bristol or Manchester office. This is an excellent opportunity to work on high?impact projects across the energy sector, supporting the transition to a more sustainable and resilient power network. The role will be primarily desk based, with the need for occasional site visits. Candidates should have a MSc or higher in Electrical Engineering, or a related field, and have a good understanding of electrical engineering theory. Knowledge of PSCAD is preferred, but experience in EMTP-RV, EMTP-ATP or similar can also be considered. The ideal candidate should have 4+ years' experience gained within a consultancy, developer, R&D or similar environment. Candidates should be interested in expanding their technical knowledge in the field of HV design and power system studies and achieving chartered engineer status (CEng). This role is general in nature and will cover a wide range of studies and design activities, and engineers will be encouraged to broaden their skills. Aurora is a young and expanding electrical consultancy so there will be many opportunities to grow with the company. xrnqpay Salary depending on experience, but is competitive Applications from more experienced candidates are more than welcome, and salary will be increased accordingly. Essential Characteristics The following characteristics are essential for all applicants: MSc or MEng or equivalent Experience in use of PSCAD for power system 4+ years' experience in power systems analysis and application Experience of EMT simulation and applications for Grid Code Studies Knowledge of inverter based generation and/or synchronous machine modelling Knowledge of insulation coordination studies Desirable Characteristics The following characteristics are desirable, but not essential for all applicants: Knowledge of control system modelling and tuning Experience of inverter structure and PPC structure's Knowledge of HVDC systems Knowledge of protection settings and coordination

Fire & Security Engineer – £55k OTE + Company Van (Private Use) Make sure to read the full description below, and please apply immediately if you are confident you meet all the requirements. Salary: £36,000 – £40,000 (depending on experience) OTE: £55,000+ with uncapped commission structure Industry: Fire & Security About the Company Join a large national Fire & Security company that is a Gent system integrator, delivering high-quality solutions across fire alarms, access control, CCTV, and intruder alarm systems. With a strong presence across the UK, this company offers long-term stability, excellent career development, and specialist training opportunities. Benefits – Fire & Security Engineer • Competitive salary up to £40,000 basic, • Uncapped commission structure with £55k+ OTE, • Company van with private use (BIK opt-in), • Overtime rates available, • 22 days holiday + bank holidays (rising with service), • Clear career progression within a national organisation, • Ongoing training and development, including Gent systems, • Supportive management and a well-structured working environment, • Install, maintain, and service fire alarm systems (Gent experience highly desirable), CCTV, access control, and intruder alarms, • Manage your diary and workload effectively to deliver high-quality service to clients, • Attend call-outs and emergency repairs as part of a scheduled rota, • Provide excellent customer service and represent the company professionally at all times, • Proven experience with fire alarms, CCTV, intruder alarms, and access control systems, • Gent-trained or experience with Gent fire systems (highly advantageous), • Full UK driving licence, • Strong technical troubleshooting and problem-solving skills, • Ability to work independently with minimal supervision, • Job security with a well-established, growing business, • Specialist Gent training and career development opportunities, • A healthy work-life balance with a typical 9-5 schedule, • Uncapped earning potential through a clear commission structure Keywords to support your application: Gent Fire Alarm Engineer, Fire Alarm Engineer, Fire and Security Engineer, CCTV Engineer, Access Control Engineer, Intruder Alarm Engineer, Fire & Security Jobs, Gent Systems, National Fire & Security Company

Job Title: I & C Design Engineer Are you the right applicant for this opportunity Find out by reading through the role overview below. Pay: Between £75,000 - £85,000 per annum Location: Hinkley Point C, Somerset Job ID: 1795 About The Role: Right across infrastructure, there's a requirement to not only maintain, but also renew and reimagine. Whatever stage you're at in your career, with us you'll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Want to be a part of it? What will you be doing? The Instrumentation & Control (I&C) Designer/Engineer plays a key role in helping deliver safe, reliable systems within the turbine halls at Hinkley Point C. Working closely with a wide range of engineering and construction teams, you'll help shape detailed design packages, support installation, and keep the project aligned with UK nuclear safety standards. Your work will guide the project from early design through commissioning and final handover. You'll develop and review I&C documents such as hook-up drawings, carry out technical assessments, and make sure every design meets regulatory and project requirements. You'll prepare material take-offs, equipment schedules, and procurement details, while keeping documentation accurate and up to date. Day-to-day, you'll collaborate with mechanical, electrical, civil, and control specialists, respond to technical queries, and support construction teams on site. You'll also work with suppliers and the client to ensure smooth integration and successful delivery of all I&C systems. What you'll bring: • Strong background in I&C design within nuclear, power, or other regulated industries, • Knowledge of safety-related and field instrumentation, • Comfortable using tools such as AutoCAD, E3D/PDMS, or Aveva E&I, • Degree or HNC/HND in a relevant engineering discipline, • Professional membership (IET, InstMC) is a bonus, • Experience on nuclear-licensed sites is highly valued, • Excellent problem-solving, communication, and teamwork skills, • High attention to detail and commitment to nuclear safety We offer a range of benefits designed to support your life in and out of work, some of which include; • Company Pension Scheme, • Death in Service Benefit, • Opportunity to purchase additional holidays per year (up to 5 days for full time employees), • My Rewards - offering discounts on high street and online shopping, • Employee assistance programme, • Private health care for you, • 25 days annual leave plus bank holidays, • Recommend a friend - get rewarded for introducing people to us! We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We're one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. xrnqpay • We're responsible and go further for our people, clients, communities and the planet, • We're open and seek new and better ways of exceeding expectations, • We're together and as one team; the whole is greater than the sum of the parts

Belcan Workforce Solutions are recruiting for a Scada Engineer - ADMS Energy systems. 12 month - Inside IR35 contract role. UK remote based with trips to UK & Europe offices as required. Job Description We're looking for a Scada Engineer to connect our customers with our technologies and products. Our team is involved in ADMS (Advanced Distributions Management System) related projects, tackling problems ranging from analysing data to providing solutions for varied customer business requirements. Our product is deployed in distribution companies worldwide and is leading in the growing market of Energy Utilities. Our software solutions deliver reliability, productivity, innovation, and efficiency through a modular architecture, adaptive algorithms, predictive analytics, and a brilliant user experience. Roles and Responsibilities Lead and manage the migration of SCADA systems into ADMS platforms. Leverage your expertise to ensure smooth transitions and integration of legacy systems into new ADMS SCADA environments. Install and configure SCADA simulation systems to support testing, training, and operational simulations. Ensure accurate modelling of SCADA environments to meet system requirements. Handle the installation and configuration of Front-End Processors (FEP) and Enhanced Front-End Processors (EFEPS), ensuring seamless communication between SCADA systems and remote devices. Conduct thorough SCADA testing, validating the system's functionality, performance, and reliability. Identify and resolve issues, ensuring the system meets operational requirements. Provide expert consultancy to clients, delivering workshops and training sessions to enhance their understanding and utilisation of SCADA systems. Share best practices and ensure clients are equipped to manage and optimize their SCADA environments. Lead the deployment and commissioning of ICCP (Inter-Control Centre Communications Protocol), ensuring proper integration of multiple control centres and seamless data communication. Stay current with emerging SCADA protocols and technologies, continuously expanding your knowledge to ensure the implementation of the latest best practices and industry standards. Required Skills & Experience: Extensive experience in ADMS SCADA migration and integration. Proven expertise in the installation and configuration of SCADA simulation systems. Solid knowledge of Front-End Processors (FEP) and Enhanced FEPs (EFEPS) installation and configuration. Strong hands-on experience in SCADA testing, troubleshooting, and optimisation. Experience providing consultancy, workshops, and training to clients on SCADA systems. Practical knowledge of ICCP deployment and commissioning. Passion for learning and staying updated on new SCADA protocols and technologies. Strong problem-solving and analytical skills. Excellent communication and customer-facing skills. Preferred Qualifications: Familiarity with a variety of SCADA protocols (e.g., IEC 61850, DNP3, Modbus, etc.). Experience with SCADA systems in the energy or utilities sector is a significant advantage. Any experience working with ADMS, OMS, and DMS systems in utility or energy sectors. Relevant certifications in SCADA systems, ADMS, or energy management technologies. xrnqpay Ability to work independently and in cross-functional teams. This vacancy is being advertised by Belcan Do you have the right skills and experience for this role Read on to find out, and make your application.

We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team. Increase your chances of reaching the interview stage by reading the complete job description and applying promptly. This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different. As a Workshop Service Engineer for Nationwide Platforms you will work within a busy depot to inspect, repair and maintain our machines ensuring that they are ready for use by our customers. Our machines are powered access machines such as booms and scissor lifts but don't worry full training will be given. So, providing you have a great attitude and are willing to learn plus have some mechanical/ electrical engineering experience behind you then this could be the role for you. In reward we can offer you a competitive salary, life assurance x2 contractual salary, Westfield health care plan, 25 days holiday and a pension. Working hours are Monday - Friday 8am - 5.30pm. Responsibilities include: - • Support the Senior Service Engineer in the effective running of the Depot workshop within the region., • Carry out pre-delivery inspections (PDI) of machines at client premises and at depot as required, and in conformance with manufacturer's specification, company policy and the regulations affecting the use. Ensure that there is no deficiency or defect likely to affect the safe working of a machine. Notify appropriate manager of any defective or unsafe equipment., • Repair machines at depot or on site as required to ensure conformance with manufactures specification and company policy., • To complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard., • Handover machines to customers and familiarise customers with safe machine operation in accordance with company procedures., • Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to depot staff as required., • Accurately complete all relevant paperwork including engineer's report, off hire, pre/delivery inspection and service sheets., • Relevant general engineering maintenance qualification, preferably to NVQ level 3 or equivalent., • Experience in diesel engineering, auto electrics, hydraulics and diagnostics fault finding., • Have a mature outlook and the ability to prioritise tasks and work well under pressure. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON™, a range of pioneering Material Handling Attachments (MHAs), and the SkySentry™ control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. xrnqpay We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment

Location: Bridgwater (Somerset) Site based (Mon-Fri) Considering making an application for this job Check all the details in this job description, and then click on Apply. Status: Contract INSIDE IR 35 Duration: Approval until 31dec26 (renewable) Reports to: Construction Superintendent Morson Edge are working with a major player in the Energy sector who have a contract requirement for a Field Engineer (Electrical Surveillance) to join their their established Project team. All work is associated with a major infrastructure project currently under construction near Bridgwater, Somerset. Job Purpose / Overview • The Field Engineer - Electrical will take responsibility for activities in the field relating to Construction Surveillance., • They will form part of a team with the primary role to deliver the NEC Supervisor duties described in the NEC contract and ensure that business Quality needs, targets and expectations are realised. Typical Accountabilities • The Field Engineer is responsible for the surveillance of quality compliance within the designated section of the Works in accordance with surveillance strategy requirements., • The Field Engineer will input into site wide management issues and will have a high level of interaction and coordination with other operational members of the site-wide team., • In addition to reporting and liaising responsibilities, the Field Engineer will be required to adhere to (and suggest enhancements and improvements to) company policies, procedures and protocols for construction, health & safety and other functions. More closely the Field Engineer will be required to: • Check that Works are constructed in accordance with the contract and escalate any non-conformance request requirements, • Proactively communicate with other site teams, maintain good communication links and ensure surveillance is timely reported, • Contribute surveillance information to support KPI indicators, • Endeavour to identify potential Quality issues before they arrive to enable mitigating actions, • Support team instructions to take temporary measures to mitigate and keep works safe and within Quality standards. Follow up by taking appropriate and proportionate action (e.g. issue communications, call meetings) to prevent the halt of works, • Enhance the team with a good perspective of current and future site activities, • Develop and maintain an understanding of construction drawings, construction activities, Quality Control Plans and Quality Inspection Records, • Ensure and monitor that Quality Inspection Records are taken and agreed before Works are covered up, • Review Contractor performance against the authorised Quality Control Plan Knowledge, Skills, Qualifications & Experience • Typically, holds a minimum of HND in a Mechanical/ Electrical Engineering qualification or equivalent vocational training and experience, • 18th Edition Wiring Regs (BS7671) & Inspection & Test (C&G 2391), CSCS or SMSTS, • Proven track record of working within a large construction team, • Broad knowledge and wide understanding of the building industry, materials, trades methods and legal requirements, • Excellent organisation, delegation and communication skills. Ability to work within a high performing team that continuously outperforms expectations and objectives, • Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract, • Good attention to detail when checking work and materials, • Able to establish appropriate working relationships with the contractors Desirable • Experience in the installation and erection of Electrical plant. xrnqpay, • General understanding of the posts obligations under CDM Regulations - along with an understanding of the document and drawing approvals processes, • Experience in the use of electronic hand held devices to capture information, • EUSR National Grid Access Persons, • Experience with LV / MV electrical distribution Systems.

Who we are Check all associated application documentation thoroughly before clicking on the apply button at the bottom of this description. We're Mller UK & Ireland, a family-run dairy business and we're experts at what we do. Dairy is a key part of a healthy and balanced diet and we're super proud to help meet the nutritional needs of millions of people, every, single, day. To do this, our business has been split into two areas: Mller Milk & Ingredients (MMI) and Mller Yogurt & Desserts (MYD). Join MMI and step into a culture that's fast-paced and full of opportunity. With great benefits, exciting challenges, a dream team of people, this is your chance to make a real impact. Over here, we're processing enough milk to make 66 billion cups of tea every year. And we're so much more than just milk. This is the place to come for cream, butter, milk drinks and ingredients products (a lot, we know), all made from milk from over 1,000 supplying farmers in Britain. Why Mller? Milk flows through everything at Mller - from farm to factory to fridge. But the true impact comes from our people, in each and every corner of the business, working hard and as a team to put smiles on faces everywhere, making each day delicious for our shoppers. As the UK's most popular dairy brand, we're always striving to make a real difference for our planet, our partners and our people, making sure we're helping to create a more sustainable dairy future.We're growing to keep up with the millions of people reaching for our branded and private label products on shelves everywhere. Join a culture full of pace that's bold and entrepreneurial, with opportunities that are yours for the taking - and even enjoy every benefit and bonus to sweeten the deal. Multi-Skilled Engineering Technician Location:Bridgwater Contract Type:Permanent - 4 on 4 off (7 AM - 7 PM, 2 days / 2 nights) We are currently recruiting for a Multi-skilled Engineering Technician at Mller Milk & Ingredients in Bridgwater. This is a hands-on role focused on maintaining and improving a wide range of equipment and systems across the site. What We're Looking For: • Multi-Skilled Engineer, • Experience from any industry (manufacturing, armed forces, automotive, etc.), • Completion of a recognised engineering apprenticeship, • Relevant qualifications and hands-on maintenance experience, • Strong fault-finding and problem-solving skills, • Ability to interpret technical drawings and schematics, • Perform planned and reactive maintenance to minimise downtime, • Diagnose and resolve faults across various systems and machinery, • Support automation and control fault finding, • Carry out preventative, condition-based, and corrective maintenance, • Clear career development pathways and long-term prospects, • Generous annual leave allowance (276 hours), • Access to the Mller Rewards Platform with discounts across major retailers, • Onsite parking, • Supportive team environment, • Life assurance and pension scheme #hiring Contact Details: F.A.O. UK Recruitment, Mller UK & Ireland, Shrewsbury Road, Market Drayton, Shropshire, TF9 3SQ Job Segment: Sustainable Agriculture, Agriculture

AV Installation Engineer Qualifications, skills, and all relevant experience needed for this role can be found in the full description below. Location South of England (field-based role requiring travel across South East & South West regions) Salary Package Competitive salary plus large company benefits, a broad flexible benefits scheme, and two paid volunteering days per year Working Hours 9.00 am - 5.30 pm, Monday - Friday Overview Our client is looking for an Installation Engineer to join a well-established and growing organisation delivering high-quality audio-visual solutions. This is a great opportunity to secure long-term career stability and progression within a respected business that invests in its people, training, and development. We are proud to be supporting our client with this opportunity. This is a field-based role covering client sites across the South of England, including both the South East and South West, depending on project requirements. Role Purpose The Audio-Visual Installation Engineer is responsible for the installation of audio-visual systems across customer environments. This role requires hands-on installation experience, strong attention to detail, and the ability to work effectively with internal teams and subcontractors to deliver high-quality AV solutions. Key Responsibilities Install a variety of AV equipment including projectors, screens, speakers, microphones, video conferencing systems, and control systems Ensure all equipment is installed in line with manufacturer specifications and internal quality standards Read and work from elevation drawings, schematic diagrams, and blueprints Adhere to all health and safety protocols during installations Ensure compliance with company policies and procedures Maintain company vehicle checks and servicing requirements Ensure personal xrnqpay PPE and tools are safe, maintained, and replaced where required Work collaboratively with colleagues and subcontractors on site Participate in training programmes and ongoing professional development Skills and Experience Proven experience in AV installations Ability to interpret and work from technical drawings and schematics Basic fault-finding and problem-solving skills Strong communication and interpersonal skills Ability to work independently and as part of a team Full UK driving licence and willingness to travel extensively across the South of England

Tools Development Engineer Check out the role overview below If you are confident you have got the right skills and experience, apply today. Location: Filton (Full time, on-site) Contract: 6 months (with potential extension) Working Pattern: 35 hours per week | Flexible start/finish within core hours Rate: £29.89 PAYE or £40.00 Umbrella About the Role Guidant Global is working in partnership with Airbus to recruit an experienced Tools Development Engineer to support the successful industrialisation of jigs and tooling assets within a complex manufacturing environment. In this role, you'll play a key part in ensuring tooling solutions are designed, developed, integrated and handed over seamlessly into operations. You'll collaborate closely with Manufacturing Engineering, Operations, Quality, Maintenance, Human Factors and external suppliers to deliver safe, compliant and efficient tooling solutions that support production excellence. This is an excellent opportunity for a hands-on engineer who enjoys working across the full tooling lifecycle and wants to contribute to high-profile aerospace programmes. What You'll Be Doing As a Tools Development Engineer, you will: • Lead the creation, development and modification of jigs and tooling assets, from initial request through to final acceptance and handover, • Translate requirements from Manufacturing Engineering, Operations, Quality, Maintenance and Human Factors into robust technical specifications, • Act as technical project lead, managing supplier interfaces and supporting supplier selection and performance, • Ensure tooling solutions meet Health & Safety, Ergonomics, Environmental, Security and Export Control requirements, • Support CapEx and OpEx activities in collaboration with Finance, • Oversee tooling design datasets, validation and manufacturing acceptance, • Support plants and Final Assembly Lines where tooling assets are in use, • Contribute to root cause analysis, continuous improvement and non-conformance resolution, • Collaborate with R&D to integrate older and emerging industrial technologies What We're Looking For Essential Experience & Skills • HNC in Engineering or significant hands-on experience (10+ years) in jig and tool design/engineering, • Strong experience using CATIA V5, • Solid tooling experience within a manufacturing or production environment (automotive or other regulated industries considered), • Awareness of tooling maintenance and lifecycle requirements, • Ability to prepare clear, structured tooling specifications, • Confident communicator, able to engage effectively from shop floor to senior stakeholders, • Strong organisational skills with the ability to prioritise workload, • Knowledge of dimensional metrology systems (CMM, Laser Tracker, Faro Arm, Photogrammetry), • Mechanical engineering background, • Experience with additive manufacturing / 3D printing, • Practical Problem Solving (PPS) and PFMEA knowledge, • Familiarity with MDM-R vaulting, • Awareness of Machinery Directive legislation and compliance requirements Why Join Guidant Global? At Guidant Global, people are at the heart of everything we do. We partner with world-leading organisations to deliver innovative workforce solutions, while providing our candidates with a supportive, transparent and engaging experience. You'll benefit from: • A dedicated recruitment partner supporting you throughout your assignment, • Access to exciting, high-profile engineering programmes, • Competitive pay and flexible working arrangements, • Opportunities to build specialist expertise and broaden your career within aerospace and advanced manufacturing, • An inclusive environment where your skills, experience and ideas are valued Our Commitment to Inclusion Guidant Global is proud to be an inclusive employer. We welcome applications from all backgrounds and are committed to creating a workplace where everyone feels respected, supported and able to thrive. xrnqpay Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Door Entry & Access Control Engineer/ Security Systems Engineer,. Door Entry & Access Control Engineer. Installation, servicing, maintenance, and fault diagnosis of door entry and access control systems.

We are seeking a skilled and reliable Air Conditioning Engineer to join our team. The successful candidate will be responsible for the maintenance and repair of a wide range of air conditioning systems across a number of commercial environments in and around Suffolk / Essex. This role requires strong technical knowledge, excellent problem-solving skills, and a customer-focused approach. Key Responsibilities Perform planned preventative maintenance (PPM) and reactive repairs on air conditioning systems (split units, VRV/VRF, chillers, AHUs, etc.). Perform routine maintenance tasks, such as cleaning and replacing filters, recordkeeping. Install, maintain, and repair heating, ventilation, and air conditioning systems Diagnose and troubleshoot HVAC system issues and make necessary repairs. Monitor and maintain BMS systems and ensure optimal performance of HVAC controls. Ensure compliance with F-Gas regulations and maintain accurate service records. Liaise with contractors and suppliers to coordinate specialist works. Respond to emergency breakdowns and participate in an on-call rota if required. Contribute to continuous improvement initiatives and energy efficiency projects. Production of detail technical quotations - including correct parts and labour times required to ensure profitability, cost control and client satisfaction. Maintain strict compliance with industry regulations and safety standards. Work flexible working hours to suit business requirements. Escalate issues to Supervisor/Contract Manager immediately. Collaborate effectively with a skilled team to achieve client objectives. To liaise with specialist sub-contractors and engineers with other disciplines to ensure the efficient operation of the plant / area without disruption to the client. Skills and Experience Proven experience in HVAC maintenance and fault finding. Additional skills in electrical or mechanical engineering (e.g., 18th Edition, plumbing, etc.). Strong understanding of health and safety regulations. Ability to work independently and as part of a team. Excellent communication and problem-solving skills. Be able to operate SMART devices and complete electronic documentation. Strong fault-finding experience is essential in this role, and you will be expected to carry out works on traditional plant equipment right through to more modern systems Specific Qualifications NVQ Level 2 Air Conditioning FGAS Cat 1 Electrical qualifications would be beneficial. IPAF/PASMA beneficial Hold a valid UK driving licence. Due to the nature of the contract, you will need to go through contract specific vetting –financial and employment background checks Manufacturer course / knowledge What we offer Competitive salary, company vehicle, company pension contribution Training and development opportunities. Supportive team environment. About Us We are MARCH®. The leading provider of critical engineering services. Supporting the industries we all rely on to improve their infrastructure, process, and digital environments. We work together with our customers to maintain business continuity, optimise output, and drive new standards in productivity, reliability, and sustainability. We help deliver operational resilience, increased performance, and better environmental outcomes, across the board. Why March? Progress is People. MARCH has ambitious plans and central to our future growth is attracting, developing and retaining the very best talent. Whether your role is onsite or office-based, engineering or support, we offer opportunities for all our people to develop their careers and maximise their potential. MARCH is committed to building teams that reflect a wide range of backgrounds, perspectives, and experiences

Job Role- Electrical Commissioning Engineer Salary: up too £70,000 Location: Bridgwater, Somerset Roles & Responsibilities: Apply and enforce nuclear, electrical, and industrial safety requirements, including prejob briefs, point of work risk assessments, and surveillance of safety rule compliance. Implement configuration control by reviewing and validating redline markups, managing temporary modifications, and ensuring commissioning data is accurately captured in IT systems (e.g., EAM, Switch, CMS). Analyse and verify electrical commissioning results, assessing compliance with acceptance criteria, identifying deviations, and engaging designers or vendors for technical resolution. Manage governance activities including control of commissioning hold points, ensuring tests meet nuclear safety justification requirements, and providing traceable LC6 evidence packages. Coordinate multidiscipline interfaces by supporting mechanical, I&C, and process commissioning teams on systems containing electrical interactions or safety dependencies. Qualifications & Experience Minimum: Time-served electrical engineering qualification (NVQ/SVQ/HNC/HND) Supported by APEL (Accredited Prior Experience and Learning)Preferred: Degree (BSc or equivalent) in an engineering-related disciplineSkills & Experience Required Strong understanding of commissioning systems, methodologies, and tools Experience with commissioning best practices (nuclear experience highly desirable) Ability to interpret technical documentation accurately Knowledge of: Risk Assessments (RA) HAZOP (Hazard and Operability Studies) HAZID (Hazard Identification Studies) Excellent communication skills, with the ability to present technical data clearly Strong organisational and team collaboration abilities Solid technical knowledge within electrical engineering discipline The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future. We welcome applications from every walk of life and are committed to diversity within the industries we support, as a certified Inclusive Recruiter and Armed Forces friendly employer. You can ensure you stay safe when job searching online by visiting the JobsAware website

Principal Embedded Software Engineer Winfrith, Dorset (hybrid working, 3 days per week onsite) – Permanent vacancy We are looking for a Principal Embedded Software Engineer to work for our maritime defence client TKMS Atlas across a range of new projects, such as underwater vehicle control systems and sonar equipment. You will be hired as an experienced engineer to play a senior technical hands-on role in the team, with the potential to take on team leadership responsibility should you wish to. This role combines hands-on expertise with the potential for strategic leadership, establishing the processes, tools, and engineering culture required to deliver high-quality embedded solutions across multiple technologies. Requirements: Strong embedded C/C++ development skills. Skilled at defining engineering processes and guiding teams in their application. Ability to generate clear specifications, architectures, verification plans and test procedures. Proven ability with current microcontrollers and SoC technologies and trends. Strong documentation and technical communication skills tailored to internal and external audiences. Ability to select the most appropriate technology based on requirements, risk, cost and time. Background delivering to safety-related standards (e.g., SIL, ASIL). HNC/HND or degree in Electrical/Electronic Engineering or equivalent. Behavioural requirements : Strong sense of ownership and accountability for engineering outcomes. Professional and confident communicator with suppliers, customers and internal stakeholders. Effective problem solver with a focus on risk reduction and pragmatic decision-making. Collaborative team player who encourages knowledge-sharing rather than competition. Adaptable, able to work to a plan while managing change effectively. Motivated, supportive leader with a track record of developing others. Able to maintain a productive, positive and continuous-improvement-focused working environment. Key accountabilities may include: Technical Leadership & Capability Building Establish, grow and lead an embedded software engineering capability covering microcontrollers and SoC systems. Provide technical authority, governance and oversight across all embedded development activities. Define, develop and maintain robust engineering processes, workflows and best-practice guidelines. Build shared, reusable modules and libraries to enable quicker, lower-risk delivery on future projects. Grow the team's design and verification toolsets in line with business strategy. Project Delivery Lead the planning, delivery, monitoring and reporting of embedded software work packages. Scope, estimate and review engineering effort to support bids, proposals, and change requests. Translate customer and system requirements into clear, maintainable software specifications. Develop preliminary architecture concepts and oversee the creation of detailed designs. Define verification strategies, validation plans, and test cases, ensuring traceability to requirements. Produce high-quality documentation including design descriptions, verification reports, and release records. Ensure engineering deliverables meet internal quality standards, compliance requirements and safety standards (e.g., SIL, ASIL). Collaboration & Cross-Discipline Integration Foster strong collaboration between software, firmware, and hardware engineering teams. Enable knowledge-sharing and cross-functional development while maintaining specialist expertise. Support smooth integration between embedded software and hardware platforms. People Leadership Mentor, coach and develop embedded engineers at all levels. Participate in recruitment, selection and onboarding of new team members. Manage tasking and provide oversight for internal engineers and specialist contractors. Additional information: The successful candidate must be able to achieve full SC (Security Clearance), however you will be able to start on a BPSS with SC pending. TPBN1_UKTJ

Are you a Senior Software Engineer looking for an interesting job opportunity? Our client, TKMS ATLAS UK, are seeking a Senior Software Engineer with skills in Java to work on the development of marine-based autonomous systems. This job will be based out of TKMS ATLAS UK's headquarters in Winfrith, Dorset. This position will need weekly on-site working, around 3 / 4 days on-site per week. Required Knowledge, skills and qualities • Proven ability to support software delivery • Educated to Degree or equivalent level in a software engineering or related discipline • Understanding of Autonomous systems, and their architectures • Understanding of the Military and Marine domain • Knowledge and understanding of Software Engineering & delivery lifecycles, and integration with project management principles and practise • Experience of Software Engineering processes and tools • Ability to work in multi-disciplinary teams, across the whole engineering lifecycle, from inception to support • Ability to work closely with end users to understand usage of software, and identify together where improvements can be developed Primary Software Skills: Java Java Build Systems (e.g. Maven) ISO 9001 Atlassian Toolset Other Desirable Software Skills: HMI Development (e.g. JavaFX) GIS Development Communication interface design and development Control Systems Git version control UML Behavioural requirements Ability to work well in a team environment, consisting of software engineers as well as engineers from other disciplines Interest in the development of future naval systems Appreciation of the usage of the end products in the field Desire to expand own knowledge base as well as sharing knowledge within the wider team Ability to work closely with those outside of the organisation, both end users and suppliers to meet and understand the requirements of the final product Willing to take a leading role in development, and represent the company in cross party workshops There are currently positions within two teams: Senior Software Engineer - Unmanned / Autonomous vehicles team Java development Working on unmanned, autonomous marine systems Customer facing role, Take ownership of work packages Senior Software Engineer - User Interface team Java development User Interface design & development (JavaFx) Developing new product or taking existing ones and updating About TKMS Atlas UK Progression and personal development opportunities are available, flexible working and a generous pension scheme. TKMS ATLAS UK has a reputation for providing innovative underwater systems for the Royal Navy (RN) and export customers. Through science, engineering and R&D they convert data into information, knowledge and capabilities that challenge the status quo, and offer winning advantage at the frontline. The continuous investment in our unique in-house test and integration facilities has supported TKMS ATLAS UK's growth in supplying UK and global markets with submarine and ship systems. This includes sonar, autonomous systems, marine electric actuation and mine counter-measures. The successful candidate must be able to achieve full UK SC level Security Clearance. TPBN1_UKTJ

Systems Engineer – Surface Ships Location: Dorchester, Dorset, England Competitive market salary negotiable at application Package Includes: Career Development and Training Employee pension contribution is matched 1.5 times by TKMS Atlas to a maximum of 10.5% ER contribution 25 days holiday (increasing to 28 days after 5 years and 30 days after 10 years) Dental Cover and Employee Assistance Programme Flexible working patterns Relocation Package Purpose of role Overseeing the design and development of innovative technical solutions that meet our customer requirements and business needs. The role covers all aspects of the product lifecycle; from requirements capture and analysis through system specification, concept studies, modelling and simulation, design and development, system integration, validation and qualification. Knowledge and experience (will be developed in the job role if not held) Ability to analyse complex problems and identify solutions Ability to guide design processes and make sound technical decisions Candidates should have previous experience in a technical/engineering role, with either a desire to develop / previous experience in delivering equipment or products into service Demonstrable and proven competence in Systems Engineering and the systems engineering lifecycle Domain knowledge in one or more of the following areas: Systems Engineering, Sonar and Underwater Acoustics, Maritime Security Systems, Marine technology, Mine warfare, Anti-submarine Warfare, Command and Control Systems (including network architectures and software) Key Skillset Key accountabilities may include Provides technical oversight to all stages of the product lifecycle, working with the Sales team, Project Manager, Engineering and Support teams. Responsible for interpreting customer requirements, specifying the system solution, planning development and testing, leading engineering lifecycle reviews and ensuring successful customer acceptance and handover. Responsible for the System Engineering outputs including: Assessing Customer requirements against product specifications System specifications System architecture definition Internal and external interface definition Test and Acceptance strategy Defining engineering work packages and sub-contractor specifications Supporting the Project/Bid Manager in identifying and managing technical risk Selling-off contract requirements by leading Factory, Harbour and Sea Acceptance Test activities Responsible to the Head of System Design for quality of technical and engineering output, following the company's System Engineering Processes and technical reviews Responsible to the customer for delivering a system that is fit for purpose Represents TKMS ATLAS UK products and systems on behalf of the business to the customer, external partners, stakeholders and suppliers Additional information Due to the sensitive nature of the product all applicants must have worked within the Defence / Military industry within the last 12 months or be capable of obtaining Security Clearance (SC level minimum). SC clearance must be in place before the successful candidate can start. TPBN1_UKTJ

Systems Engineer – Surface Ships Location: Dorchester, Dorset, England Salary: Competitive Market salary Package Includes: • Career Development and Training • Employee pension contribution is matched 1.5 times by TKMS Atlas to a maximum of 10.5% ER contribution • 25 days holiday (increasing to 28 days after 5 years and 30 days after 10 years) • Dental Cover and Employee Assistance Programme • Flexible working patterns • Relocation Package Purpose of role Overseeing the design and development of innovative technical solutions that meet our customer requirements and business needs. The role covers all aspects of the product lifecycle; from requirements capture and analysis through system specification, concept studies, modelling and simulation, design and development, system integration, validation and qualification. Knowledge and experience (will be developed in the job role if not held) • Ability to analyse complex problems and identify solutions • Ability to guide design processes and make sound technical decisions • Candidates should have previous experience in a technical/engineering role, with either a desire to develop / previous experience in delivering equipment or products into service • Demonstrable and proven competence in Systems Engineering and the systems engineering lifecycle • Domain knowledge in one or more of the following areas: Systems Engineering, Sonar and Underwater Acoustics, • Maritime Security Systems, Marine technology, Mine warfare, Anti-submarine Warfare, Command and Control Systems (including network architectures and software) Key Skillset Key accountabilities may include • Provides technical oversight to all stages of the product lifecycle, working with the Sales team, Project Manager, Engineering and Support teams. • Responsible for interpreting customer requirements, specifying the system solution, planning development and testing, leading engineering lifecycle reviews and ensuring successful customer acceptance and handover. • Responsible for the System Engineering outputs including: o Assessing Customer requirements against product specifications o System specifications o System architecture definition o Internal and external interface definition o Test and Acceptance strategy o Defining engineering work packages and sub-contractor specifications o Supporting the Project/Bid Manager in identifying and managing technical risk • Selling-off contract requirements by leading Factory, Harbour and Sea Acceptance Test activities • Responsible to the Head of System Design for quality of technical and engineering output, following the company's System Engineering • Processes and technical reviews • Responsible to the customer for delivering a system that is fit for purpose • Represents TKMS ATLAS UK products and systems on behalf of the business to the customer, external partners, stakeholders and suppliers TPBN1_UKTJ

Our most successful hires have come from a range of backgrounds including chemical engineering, process engineering, and mechanical engineering. Degree in Mechanical Engineering, Chemical Engineering, Process Engineering, or closely related discipline. We design ventilation, LEV, specialist HVAC, an

JOB TITLE: Junior Control Systems Engineer. We’re looking for a Junior Control Systems Engineer to join a growing automation team in the Merseyside area. You’ll work alongside experienced engineers on real projects, helping design, build, and test systems used in real-world environments.

A Senior/Principal Engineer is required to lead control system modelling and analysis, working within a multidisciplinary team to design, evaluate, and integrate flight and ground control systems. Candidates should have 8+ years of experience in control systems, with strong expertise in control theo

Position: Electrical Control Systems Engineer Location: Bishops Stortford Salary: £40,000 - £50,000 - depending on experience Electrical Control Systems Engineer required. Electrical Control Systems Engineer Position Requirements Experience in controls and basic wiring. Electrical Control Systems

Controls Systems Intergration Engineer- designs, develops, and maintains systems that automate industrial processes, ensuring optimal performance and safety. This is a fantastic opportunity to join our team, as a Controls Systems Intergration Engineer, you will be responsible for the full life cycle

We are seeking a Control Systems Engineer to join this companys engineering team.

We are looking for an experienced Lead Control Systems Engineer to take technical leadership of control systems design, implementation, testing, commissioning, and ongoing support across multidisciplinary projects. Significant experience (typically 8+ years) in control systems engineering in a techn

A specialist engineering company in Hailsham is seeking an experienced Control Systems Engineer. Responsibilities include designing control algorithms with Siemens STEP 7, troubleshooting systems, and commissioning control systems. The ideal candidate will have a degree in Electrical Engineering, ex

A well-established engineering business is seeking a Junior Control Systems Engineer in Stockton-On-Tees. Candidates should have a degree or relevant background in electrical engineering and a keen interest in control systems and automation. The role involves supporting the design and development of

A recruitment firm is seeking a Generator Controls System Engineer in the West Midlands or South of England. This field-based role entails complete ownership of generator control system projects, including design, building, and commissioning of electrical control panels. The ideal candidate will hav

This is an excellent opportunity to join a growing team where you'll gain real project experience and develop into a fully‑fledged Control Systems Engineer. Junior Control Systems Engineer. Are you a graduate or junior engineer with an electrical background looking to build a career in control sys

A leading engineering firm in London is seeking a Senior Electrical Engineer to join their team. The role involves leading the electrical design for heavy movable structures and managing control systems projects. Ideal candidates will have 15 to 20 years of experience in electrical engineering, prof

In this role, you will be responsible for promoting and selling building energy management system solutions, including HVAC control systems and energy‑efficient building technologies. Provide technical expertise on building management systems, HVAC controls, and other energy‑efficient technologi

Ideal candidates will have experience in electrical design and control systems, familiarity with tools like AutoCAD Electrical or EPLAN, and a full UK driving license. A growing engineering firm in England is seeking an experienced Electrical Engineer. The role involves designing and developing elec

A leading renewable energy company is seeking a Control Engineer to manage systems for the East Anglia 3 Wind Farm. Ideal candidates should have experience in HV systems, knowledge of SCADA, and hold necessary authorizations.

Execute concept and detailed design tasks including control system architecture, calculations, software specifications, BOM creation, and coding under guidance from senior engineers. Control System Engineer Key Requirements:. This Control System Engineer will be working on the full lifecycle of thes

A leading consulting and technology firm in the UK is seeking a Control System Engineer to develop and verify control systems for aerospace applications. The role involves collaboration with global engineering teams and full lifecycle responsibilities.

A leading facilities management company is seeking a Security Systems Installation Engineer to handle the installation and commissioning of various security systems including CCTV, Intruder Alarms, and Access Control in the United Kingdom.

A leading security services company in Bristol is seeking a skilled individual to service and maintain intruder and CCTV systems.

A leading engineering firm is seeking a Senior Control Systems Engineer to lead the development of innovative control systems for high-performance electrified vehicles. Required qualifications include a degree in a relevant field, experience with MATLAB and Simulink, and a passion for automotive eng