Trabajos control systems engineer en AldershotCrear alertas

Our client, a prestigious organisation within the Defence & Security sector, is looking for a Senior Network Engineer to join their dynamic team in Farnborough. This is a permanent role where you will work with cutting-edge technology and contribute to innovative solutions that empower and protect lives. Key Responsibilities: • Leading the design, implementation and support of enterprise-grade solutions across one or more technology domains, • Taking ownership of complex technical deliverables, ensuring quality, performance, and alignment with architectural and strategic standards, • Providing technical leadership and mentoring to Engineers and Associate Engineers, • Collaborating with principal engineers, architects, and capability leads to align engineering outputs with strategic goals, • Representing engineering in cross-functional discussions, influencing decisions and driving alignment across teams, • Contributing to technology roadmaps and continuous improvement initiatives, • Ensuring compliance with security, performance and operational standards, • Proactively identifying and mitigating risks across engineering deliverables and service operationsJob Requirements:, • Experience with large-scale, multi-site enterprise networks across LAN, WAN, datacentre, and hybrid-cloud/cloud environments, • Knowledge of routing and switching protocols including BGP, OSPF, VXLAN, EVPN, WI-FI and Network Authentication Protocols (e.g. 802.1x), • Experience with Cisco Catalyst/Nexus/WLC, Cisco Meraki, Palo Alto, and Dell products, • Familiarity with security solutions, including firewalls, intrusion prevention/detection systems, and network access control solutions, • Experience with Software Defined Networking including virtualisation technologies such as VMWare NSX-T, • Experience with network automation, • CCNP or equivalent industry experienceBenefits:, • Matched contribution pension scheme, with life assurance, • Generous holiday allowance, with the option to purchase additional days, • Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance, • Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more, • Support for the Armed Forces community through the Armed Forces Covenant

About Voltitude Voltitude (founded 2020) is a specialist engineering company based in Farnborough, UK. Our team brings decades of experience across aviation, space, and defence, with world leading expertise in High-Altitude Pseudo-Satellites (HAPS), both fixed wing and lighter than air. We develop advanced technologies, payload systems and engineering solutions that help unlock and operationalise the stratosphere. If you want to work at the leading edge of novel flight systems — in a company where your work directly shapes real world hardware — this is a rare opportunity. Role Overview This role is ideal for a software engineer with approx. 5 years’ experience who wants to grow rapidly and work across the full engineering lifecycle in a hands-on R&D environment. You will contribute to the development of software for stratospheric flight systems, from early concept work through integration, testing, and operational deployment. You will work closely with avionics, systems, hardware engineers and operators, gaining exposure to real-time embedded systems, sensors, user applications, and flight test activities. The environment is fast-paced, supportive, and highly collaborative — perfect for someone who enjoys problem solving, building real systems, and learning quickly. You will be based at the Voltitude offices in Farnborough and would typically be expected to be in the office for the majority of the working week. Some UK and international travel may be required for test and flight campaigns. Key Responsibilities Working with the Chief Technology Officer, Head of Software and Head of Avionics, you will be responsible for the following: • Requirements capture and specification for embedded and PC-based software, • Full-lifecycle software design and implementation, • Real-time embedded programming in C, • Development of PC tools and test utilities (C, C++, Python), • Software qualification and traceability against requirements Skills and Experience Essential: • Degree/apprenticeship in software, computer engineering, aerospace engineering or similar, • Experience programming real-time embedded systems in C, • Windows application development using C/C++/Python, • Strong understanding of software engineering principles, requirements management, and testing, • Experience using software version control systems, • Comfortable working hands-on with hardware, • Strong communication and documentation skills, • Experience of MISRA coding standards, • Software design for high reliability systems, • Knowledge of the version control systems GIT and SVN, • Web development using WordPress, • Experience with PX4 / Pixhawk or other flight control stacks, • Linux development, • Proficient with MS Office suite (Word, Excel, PowerPoint, Project), • Self-starter, • Autonomous worker, • Ability to make decisions and prioritise work in response to changing project risks or schedules, • Positive and helpful attitude, • Willingness to learn, • Attention to detail Voltitude offices are on Cody Technology Park. To access the site you will need to able to pass Baseline Personal Security Screening (BPSS) checks. Further information is available at GOV.UK. Right to work in the UK is essential. Additional Benefits • Company pension, • Life insurance, • Site canteen, • Health & wellbeing programme, • On-site parking (free), • On-site gym

SAP Security and Implementation Engineer £700 - £750 pd | Hybrid | Contract | Inside IR35 At the sharp end of space exploration, this programme supports technology that genuinely leaves the planet. You’ll be working in an environment where precision, security and reliability aren’t nice-to-haves; they’re mission-critical. What makes it even more interesting, this isn’t happening in isolation. You’ll be contributing to work that sits alongside collaborations with SpaceX, NASA, and other leading players across the global space sector. In short, the systems you help secure won’t just support a business. They’ll support missions, Spacecraft, satellites and infrastructure that operate far beyond our little blue planet. You'll be stepping into a live S/4HANA Public Cloud programme.You’ll understand how security and identity actually work across the platform. Not just maintaining roles, but shaping the model, tightening controls, and making sure access aligns with how the business really operates - not how someone thinks it should. Day to day • Designing and refining SAP roles and authorisations that actually make sense, • Running SoD analysis without turning it into a bureaucratic nightmare, • Building clean, usable provisioning processes, • Translating business activity into solid, workable security design, • Getting hands-on in a live S/4HANA environment and improving what’s already there, • Spotting weaknesses and fixing them before they become problemsWhat you’ll need, • Strong SAP Security & Authorisations background, • Solid S/4HANA experience (Public Cloud helps, but not essential), • A track record of designing roles and access models properly, • Good grasp of Segregation of Duties and governance — with a practical mindset, • Comfortable dealing with stakeholders who don’t speak “SAP”, • Someone who takes ownership and follows things throughUseful extras (not deal-breakers), • SAP Fiori or HANA security exposure, • Experience with SAP GRC / Access Control It’s a live programme, still evolving, where your input has a direct impact on how security is shaped going forward. And yes - the work feeds into something a bit more interesting than another finance system rollout.

Join a cutting-edge tech team shaping secure digital solutions for high-stakes environments. This Senior Software Engineer role is your chance to work on innovative projects that blend cloud, front-end, and back-end development in a collaborative, fast-paced setting. Role Overview: • Location: Farnborough (Hybrid), • Package: Competitive, with bonus and benefits, • Industry: Secure Digital Technology / Defence What You’ll Be Doing: • Design, build, and maintain robust software solutions across front-end and back-end., • Develop responsive user interfaces using JavaScript/TypeScript (React)., • Implement backend systems with Java, Python, or Go., • Manage version control and collaboration with Git., • Deploy and optimise cloud services on AWS or Azure., • Use Docker to containerise applications and streamline deployments., • Maintain CI/CD pipelines to automate software delivery., • Participate in code reviews and contribute to team knowledge., • Stay up to date with emerging technologies and best practices. Main Skills Needed: • Strong proficiency in Git and cloud platforms (AWS, Azure)., • Front-end development with JavaScript/TypeScript and React., • Back-end development in Java, Python, or Go., • Experience with Docker and CI/CD processes., • Understanding of DevOps principles and Agile methodologies., • Knowledge of algorithms, data structures, and secure coding practices., • Excellent teamwork and communication skills., • Ability to adapt and learn in a fast-paced environment., • Bonus: Kubernetes or container orchestration experience, web security knowledge. What’s in It for You: • Hybrid working and a flexible, collaborative culture., • 25 days holiday plus bank holidays., • Private medical insurance, life assurance, and pension., • Professional development and learning opportunities., • Cycle to Work and Perks at Work schemes., • Discretionary bonus scheme and a team driven by innovation, security, and quality. Fancy a proper challenge? You might have just found it. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. By applying you are confirming you are happy to be added to the Addition Solutions mailing list regarding future suitable positions. You can opt out of this at any time simply by contacting one of our consultants.

Electrical Design Engineer 6 month contract Based in Farnborough Offering £27.82ph Inside IR35 Do you have experience using SolidWorks Electrical toolset? Do you have experience in the Aviation industry? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Support Avionics and Systems Engineering teams in developing and maintaining the production design record for new concepts and design changes, • Produce detailed electrical design solutions using SolidWorks Electrical, • Select appropriate electrical components to satisfy schematic and system-level requirements, • Act as a key contact for electrical design queries across engineering and production, • Provide hands-on support to the build line in resolving emerging electrical issues, • Help manage design changes in line with configuration and change control processes, • Collaborate with Production and Procurement teams to ensure Design for Manufacture (DFM) considerations are addressed early in the lifecycle Your skillset may include: • Previous experience in aviation focused electrical design, • ONC/HND, or equivalent qualification in Electrical or Aerospace Engineering, • Experience in SolidWorks Electrical, • Experience working with PDM systems, • Experience resolving emergent electrical issues and developing innovative solutions, • Experience translating system-level requirements into complete design solutions If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Electrical Design Engineer – Contract Location: Farnborough (Hybrid – minimum 3 days on-site per week) Contract Length: 6 months (potential extension / permanent) Hours: 37 per week IR35 Status: Inside IR35 Pay Rate: £20.79 per hour PAYE / £27.82 per hour Umbrella Overview Carbon60 are supporting their aerospace client based in Farnborough to recruit an Electrical Design Engineer to support the design, development and delivery of electrical products across a range of programmes. This is a great opportunity to join a growing team working on innovative, aviation‑focused projects with exposure to complex design challenges and a collaborative, multi‑disciplinary environment. Key Responsibilities • Produce detailed electrical design solutions using SolidWorks Electrical., • Maintain and update digital design records in line with engineering processes., • Select electrical components to meet schematic and system‑level requirements., • Act as a key point of contact for electrical design queries across engineering and production teams., • Provide hands‑on support to the build line to resolve emerging electrical issues., • Support design maturity gate reviews and manage design changes in line with configuration and change control processes., • Collaborate with Production and Procurement teams to ensure Design for Manufacture (DfM) principles are incorporated early. Requirements • Proven experience in aviation-focused electrical design., • Good proficiency in SolidWorks Electrical (essential)., • Experience using PDM systems (advantageous)., • Ability to translate system‑level requirements into complete design solutions., • Practical experience resolving emergent electrical issues., • ONC/HND or equivalent in Electrical or Aerospace Engineering If you are interested in this opportunity please apply with the latest copy of your CV - for more information contact Ellie at Carbon60 at

Site Reliability Engineer Introduction Join a fast-growing digital technology business delivering secure, cutting-edge solutions into highly regulated environments. This role sits at the heart of platform performance and reliability, helping shape how complex systems are built, deployed, and scaled globally. Role Overview: • Location: Farnborough (hybrid), • Package: Competitive salary + bonus + strong benefits package, • Industry: Defence & Security / Technology What You’ll Be Doing: • Build and optimise Kubernetes environments for scalable, resilient deployments, • Design and implement CI/CD pipelines to streamline delivery and improve efficiency, • Develop and maintain monitoring solutions to ensure platform performance and uptime, • Manage code repositories and version control processes to support collaborative development, • Drive automation across deployment and operational workflows, • Work closely with platform and development teams to ensure seamless integration, • Provide technical guidance on best practices for platform usage and deployment, • Lead on deployment automation, integration testing, and pipeline configuration, • Support ongoing improvements in platform security, scalability, and maintainability, • Stay ahead of emerging technologies to continuously evolve platform capabilities, • Travel internationally as required to support project delivery Main Skills Needed: • Strong experience in Site Reliability Engineering or Platform Engineering, • Hands-on expertise with Kubernetes and container orchestration, • Proven background building CI/CD pipelines (e.g. Jenkins, GitLab CI/CD), • Experience with monitoring tools such as Prometheus and Grafana, • Solid understanding of Git and repository management practices, • Demonstrated success in driving automation and improving system reliability, • Strong communication skills with experience working across technical teams, • Problem-solving mindset with the ability to thrive in fast-paced environments, • Exposure to cloud platforms (AWS, Azure, or GCP) is beneficial What’s in It for You: • Work on impactful projects within highly secure, mission-critical environments, • Be part of a collaborative, forward-thinking engineering team, • Clear opportunities for professional development and progression, • Private medical insurance and life assurance, • Competitive pension and discretionary bonus scheme, • 25 days holiday plus bank holidays, • Access to on-site facilities including gym, café, and modern breakout spaces, • Flexible, inclusive culture with a focus on innovation and quality Call to Action: If you’re nodding along, let’s take the next step. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. By applying you are confirming you are happy to be added to the Addition Solutions mailing list regarding future suitable positions. You can opt out of this at any time simply by contacting one of our consultants.

Description Senior Systems Engineer Location: Farnborough or Whiteley, with flexibility to work from home dependent on business demands) Salary: £61,500 - £78,800 The Role: As a Senior Systems Engineer on a critical national infrastructure programme you will have a full understanding of the principles of systems engineering and prior experience in a similar role accepting and integrating deliveries from suppliers. Using your experience in Systems Engineering, you will be responsible for working with customers and suppliers to execute Systems Engineering activities across the full lifecycle, including area with focus on Model Based Systems Engineering (MBSE). We are seeking an experienced and skilled Systems Engineer with multi-domain expertise, an understanding of business strategy, and experience with enterprise architecture frameworks, including DoDAF, MODAF, and TOGAF. In this role, you will be responsible for designing, implementing, and maintaining complex systems that align with our business objectives while adhering to industry-standard architecture frameworks. The ideal candidate will understand both technical and strategic aspects, ensuring that system solutions meet technical requirements and support and drive business goals within structured architecture frameworks Key Responsibilities: • Working with operational stakeholders, technology suppliers and architects to refine system and sub-system requirements and acceptance criteria, • Modelling of functional and non-functional requirements and scenarios using MBSE and architectural framework approaches, • Modelling operational, business and system designs & behaviours within architectural views, • Define and develop requirements, turn them into a feasible solution by proposing an architecture, system and component definition, • Develop component and system specifications/descriptions as well as compliance criteria for the system, items, components, hardware and software, • Develop functions, systems, items and components to industry security and safety standards, and others as appropriate, • Develop and manage requirements at all levels from system, item, components, down to hardware and software level, • Define validation plans and ensure compliance through analysis, simulation and/or test (e.g. DO160) as appropriate, • Interface Control Documents (ICDs) / Application Programming Interfaces (APIs), • Allocation of requirements to lower-level components, conducting technical derivation analysis as required, • Managing compliance assessments at system and lower levels, • Maintaining the high-level design and overseeing development of lower-level designs, • Producing detailed engineering artefacts such as:, • High-Level and Low-Level Designs, • Compliance Reports, • Preparing for and delivering milestone technical reviews and the associated work product deliverables, • Technically engage with the supply chain, • Work with the systems architects, mechanical systems engineers and system simulation engineers to ensure that the system requirements are achieved, • Anticipate and manage transversal technical and business issues, arbitrate between solutions considering all aspects: sustainability, reusability, optimisation, opportunity, schedule, quality, cost, risks, safety and performance, • Generate technical reports and presentations, with the ability to present information in a clear and organized manner, • Develop specification documents and procedures for new products before launched into manufacturing., • Ensure specification and ensure the production, compliance and test of the components, items and systems., • Develop validation test methods and protocols. Use Aerospace best practices., • Participate in in-depth analysis of test data, • Ensure configuration management is in place for the systems and all its components from requirement through to operation, • Provide general technical feedback on the design and development of mechanical and electrical sub-systems, • Facilitate technical review sessions, • Deliver project health status updates, • Engage with clients, suppliers, and regulatory bodies to formulate engineering solutions, • Recognize technical risks and devise mitigation strategies, • Managing the technical backlog and the content of associated releases What does Leidos need from me? • Extensive experience in the defence, security or other safety and security critical information systems sectors, • Strong experience with systems modelling and in associated MBSE tools (e.g. NoMagic Cameo), Architectural Frameworks (e.g. TOGAF) and Languages (e.g. SysML), • Strong knowledge of requirements and user scenario development in both text based and model based approaches, • Success in working within mission-critical systems integration programmes, • Ability to work with several stakeholders and suppliers, working across organisational boundaries as appropriate, • Experience of developing system behavioural diagrams, modelling interfaces and developing models to encapsulate functional & non-functional requirements and designs, • Demonstrable successes within the System Engineering environment, • Excellent customer facing skills, including being able to ingest large volumes of requirements and information developing clear understanding of customer hot buttons and needs, • Understanding designing / delivering systems in a public cloud environment Desired Attributes: • Positive mindset, • Capability to thrive in a multicultural setting, • Excellent interpersonal abilities, • Meticulous attention to detail, • Ability to adhere to deadlines Desirable • Experience logical development including the specification and validation of safety critical software, • Proficiency in RBE tools, e.g. DOORS, • Experience in data management role, • Proficiency in Multi-domain Modelling/Simulation packages, e.g. MATLAB, Simulink, Simscape, Amesim or other Clearance Requirements: The successful applicant will be required to hold and maintain UK Security Clearance What we do for you: At Leidos we are PASSIONATE about customer success, UNITED as a team and INSPIRED to make a difference. We offer meaningful and engaging careers, a collaborative culture, and support for your career goals, all while nurturing a healthy work-life balance. We provide an employment package that attracts, develops and retains only the best in talent. Our reward scheme includes: • Contributory Pension Scheme, • Private Medical Insurance, • 33 days Annual Leave (including public and privilege holidays), • Access to Flexible benefits (including life assurance, health schemes, gym memberships, annual buy and sell holidays and a cycle to work scheme), • Flexi-Time Working Commitment to Diversity: We welcome applications from every part of the community and are committed to a truly diverse and inclusive culture. We foster a sense of belonging, welcoming all perspectives and contributions, and providing equal access to opportunities and resources for everyone. If you have a disability or need any reasonable adjustments during the application and selection stages please let us know, and we will respond in a way that best fits your needs. Who We Are: ___– we work to make the world safer, healthier, and more efficient through technology, engineering and science. Leidos is a growing company delivering innovative technology and solutions focused on safeguarding critical capabilities and transformation in frontline services, our work in the United Kingdom includes addressing some of the most complex problems in defence, healthcare, government, safety and security, and transportation. What Makes Us Different: Purpose: you can use your passion and abilities at Leidos to keep the people you care about safe. We are at the forefront of machine learning, AI, cyber security and solutions. Using your skills in the technology frontline by helping to build a safer world. You can inspire change. Collaboration: having flexibility to do your job is one of our core benefits, enabling you to become part of our extraordinary team. We have been empowering our people to work flexibly for years. Whether you work from home, the office or on customer sites, we will give you the digital tools and the flexibility to work smarter and align your needs and ours. People: Leidos empowers people from every background to be themselves and gives you the tools to learn new skills by enabling growth whilst developing. We believe that extraordinary people need opportunities to grow, to be inspired and to inspire others. At Leidos, we invest in technical academies, career rotations and a career development plans that enhance your future. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. £61,500.00-£78,800.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Description Senior Systems Engineer Location: Farnborough or Whiteley, with flexibility to work from home dependent on business demands) Salary: £61,500 - £78,800 The Role: As a Senior Systems Engineer on a critical national infrastructure programme you will have a full understanding of the principles of systems engineering and prior experience in a similar role accepting and integrating deliveries from suppliers. Using your experience in Systems Engineering, you will be responsible for working with customers and suppliers to execute Systems Engineering activities across the full lifecycle, including area with focus on Model Based Systems Engineering (MBSE). We are seeking an experienced and skilled Systems Engineer with multi-domain expertise, an understanding of business strategy, and experience with enterprise architecture frameworks, including DoDAF, MODAF, and TOGAF. In this role, you will be responsible for designing, implementing, and maintaining complex systems that align with our business objectives while adhering to industry-standard architecture frameworks. The ideal candidate will understand both technical and strategic aspects, ensuring that system solutions meet technical requirements and support and drive business goals within structured architecture frameworks Key Responsibilities: • Working with operational stakeholders, technology suppliers and architects to refine system and sub-system requirements and acceptance criteria, • Modelling of functional and non-functional requirements and scenarios using MBSE and architectural framework approaches, • Modelling operational, business and system designs & behaviours within architectural views, • Define and develop requirements, turn them into a feasible solution by proposing an architecture, system and component definition, • Develop component and system specifications/descriptions as well as compliance criteria for the system, items, components, hardware and software, • Develop functions, systems, items and components to industry security and safety standards, and others as appropriate, • Develop and manage requirements at all levels from system, item, components, down to hardware and software level, • Define validation plans and ensure compliance through analysis, simulation and/or test (e.g. DO160) as appropriate, • Interface Control Documents (ICDs) / Application Programming Interfaces (APIs), • Allocation of requirements to lower-level components, conducting technical derivation analysis as required, • Managing compliance assessments at system and lower levels, • Maintaining the high-level design and overseeing development of lower-level designs, • Producing detailed engineering artefacts such as:, • High-Level and Low-Level Designs, • Compliance Reports, • Preparing for and delivering milestone technical reviews and the associated work product deliverables, • Technically engage with the supply chain, • Work with the systems architects, mechanical systems engineers and system simulation engineers to ensure that the system requirements are achieved, • Anticipate and manage transversal technical and business issues, arbitrate between solutions considering all aspects: sustainability, reusability, optimisation, opportunity, schedule, quality, cost, risks, safety and performance, • Generate technical reports and presentations, with the ability to present information in a clear and organized manner, • Develop specification documents and procedures for new products before launched into manufacturing., • Ensure specification and ensure the production, compliance and test of the components, items and systems., • Develop validation test methods and protocols. Use Aerospace best practices., • Participate in in-depth analysis of test data, • Ensure configuration management is in place for the systems and all its components from requirement through to operation, • Provide general technical feedback on the design and development of mechanical and electrical sub-systems, • Facilitate technical review sessions, • Deliver project health status updates, • Engage with clients, suppliers, and regulatory bodies to formulate engineering solutions, • Recognize technical risks and devise mitigation strategies, • Managing the technical backlog and the content of associated releases What does Leidos need from me? • Extensive experience in the defence, security or other safety and security critical information systems sectors, • Strong experience with systems modelling and in associated MBSE tools (e.g. NoMagic Cameo), Architectural Frameworks (e.g. TOGAF) and Languages (e.g. SysML), • Strong knowledge of requirements and user scenario development in both text based and model based approaches, • Success in working within mission-critical systems integration programmes, • Ability to work with several stakeholders and suppliers, working across organisational boundaries as appropriate, • Experience of developing system behavioural diagrams, modelling interfaces and developing models to encapsulate functional & non-functional requirements and designs, • Demonstrable successes within the System Engineering environment, • Excellent customer facing skills, including being able to ingest large volumes of requirements and information developing clear understanding of customer hot buttons and needs, • Understanding designing / delivering systems in a public cloud environment Desired Attributes: • Positive mindset, • Capability to thrive in a multicultural setting, • Excellent interpersonal abilities, • Meticulous attention to detail, • Ability to adhere to deadlines Desirable • Experience logical development including the specification and validation of safety critical software, • Proficiency in RBE tools, e.g. DOORS, • Experience in data management role, • Proficiency in Multi-domain Modelling/Simulation packages, e.g. MATLAB, Simulink, Simscape, Amesim or other Clearance Requirements: The successful applicant will be required to hold and maintain UK Security Clearance What we do for you: At Leidos we are PASSIONATE about customer success, UNITED as a team and INSPIRED to make a difference. We offer meaningful and engaging careers, a collaborative culture, and support for your career goals, all while nurturing a healthy work-life balance. We provide an employment package that attracts, develops and retains only the best in talent. Our reward scheme includes: • Contributory Pension Scheme, • Private Medical Insurance, • 33 days Annual Leave (including public and privilege holidays), • Access to Flexible benefits (including life assurance, health schemes, gym memberships, annual buy and sell holidays and a cycle to work scheme), • Flexi-Time Working Commitment to Diversity: We welcome applications from every part of the community and are committed to a truly diverse and inclusive culture. We foster a sense of belonging, welcoming all perspectives and contributions, and providing equal access to opportunities and resources for everyone. If you have a disability or need any reasonable adjustments during the application and selection stages please let us know, and we will respond in a way that best fits your needs. Who We Are: ___– we work to make the world safer, healthier, and more efficient through technology, engineering and science. Leidos is a growing company delivering innovative technology and solutions focused on safeguarding critical capabilities and transformation in frontline services, our work in the United Kingdom includes addressing some of the most complex problems in defence, healthcare, government, safety and security, and transportation. What Makes Us Different: Purpose: you can use your passion and abilities at Leidos to keep the people you care about safe. We are at the forefront of machine learning, AI, cyber security and solutions. Using your skills in the technology frontline by helping to build a safer world. You can inspire change. Collaboration: having flexibility to do your job is one of our core benefits, enabling you to become part of our extraordinary team. We have been empowering our people to work flexibly for years. Whether you work from home, the office or on customer sites, we will give you the digital tools and the flexibility to work smarter and align your needs and ours. People: Leidos empowers people from every background to be themselves and gives you the tools to learn new skills by enabling growth whilst developing. We believe that extraordinary people need opportunities to grow, to be inspired and to inspire others. At Leidos, we invest in technical academies, career rotations and a career development plans that enhance your future. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. £61,500.00-£78,800.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

New Permanent Opportunity for a Senior Infrastructure Engineer with MoD DV Clearance for an exciting Defence SME in Farnborough. • Farnborough location – full-time on-site, • Must already hold MoD DV Clearance, • Up to £80kDoE plus package, • Experience needed in Team Leadership, Stakeholder Management, Windows Server, VMware, Linux Who Are We? Our client is a leading provider of secure digital solutions, specialising in rapid experimentation and deployment of advanced technology in highly secure environments. They focus on accelerating innovation for Defence and National Security, supported by a multidisciplinary team covering secure-by-design, cloud, infrastructure, software development, cross-domain systems, HPC, data platforms, and cybersecurity. What will the Senior Infrastructure Engineer be doing? Maintaining and enhancing secure, multi-classification virtualised and cloud environments across public, private, and hybrid platforms, with senior oversight of monitoring, incident response, change control, and lifecycle management. The role focuses on service improvement, automation, and risk mitigation, alongside providing technical leadership, stakeholder support, and maintaining expertise in cloud and network technologies. The Senior Infrastructure Engineer Should Have… • Active security clearance at MoD DV level – due to the nature of the client and role, we can only consider candidates who hold a British passport., • Be willing to work full-time on client site in Farnborough Essential Skills Required: • Team leadership and stakeholder management, • Windows Server 2016+ administration., • Red Hat OpenShift Linux (CentOS/RedHat/Ubuntu), • EUD provisioning (Autopilot), maintenance, patching and hardening., • SSO – concepts and operation., • Understanding of working in secure environments., • VMware Azure Networking Automation (scripting Ansible/PowerShell) Some Desirable Skills: • Kubernetes administration e.g. VMware TKGI, • VMware vSphere/vCenter/VCF., • Azure/Microsoft 365 administration., • DevSecOps Tooling, • Elastic, • Nessus, • Application Packaging, • Terraform, • Vault, • Working in Agile sprints To be Considered… Please either apply by clicking online or emailing me directly to . For further information please call me on 0161 416 6800 / 07719065951 - I can make myself available outside of normal working hours to suit from 7am until 10pm. If unavailable, please leave a message and either myself or one of my colleagues will respond. By applying for this role, you give express consent for us to process & submit (subject to required skills) your application to our client in conjunction with this vacancy only. Also feel free to connect with me on LinkedIn, just search Henry Clay-Davies (searchability). I look forward to hearing from you. KEY SKILLS: INFRASTRUCTURE ENGINEER / SENIOR INFRASTRUCTURE ENGINEER / TEAM LEAD / STAKEHOLDER MANAGEMENT / VMWARE / DOCKER / TERRAFORM / LINUX / POWERSHELL / NATIONAL SECURITY / DEFENCE / SECURITY CLEARED / DV CLEARED / FARNBOROUGH

Lead VDI Engineer (Omnissa/VMware Horizon) - Defence/Secure Platforms Farnborough (On-site) .(TO APPLY YOU MUST HAVE 5 YEARS UK RESIDENCY)* £70,000 - £100,000 + Bens + Car Allowance + Company Bens We're working with a leading technology organisation in the defence sector that is building out a highly secure, multi-tenant, multi-datacentre platform from a brand-new Farnborough site. As part of this programme, they're looking to hire a Lead VDI Engineer to take ownership of the EUC/VDI layer across a large-scale Wintel and VMware Horizon environment. This is a hands-on technical leadership role, working on systems aligned to NCSC-grade security standards, where you'll play a key role in shaping both the architecture and delivery of a critical platform. The Role You'll act as the technical lead for VDI/EUC, owning delivery end-to-end and setting the direction for how the environment is designed, deployed and operated. Key responsibilities include: • Leading the VDI/EUC workstream from a technical perspective, • Designing and implementing multi-site, multi-tenant VMware Horizon environments, • Driving delivery across the full life cycle - design, build, deployment, hardening and optimisation, • Ensuring the platform meets strict security, resilience and availability standards, • Producing and owning key documentation (LLDs, DR/failover procedures, release notes, runbooks), • Defining and improving engineering standards, processes and best practice, • Omnissa (VMware) Horizon View, • Becrypt OS and Becrypt Enterprise Manager (EUD), • VDI architecture, deployment and operational support, • Unified Access Gateway (UAG), • App Volumes, • Dynamic Environment Manager (DEM), • Secure by Design principles and security framework compliance, • DR planning, testing and documentation, • SLA management and incident resolution, • Lifecycle and obsolescence management, • LLD production and maintenance, • Release notes and operational runbook authorship, • Change control processes, • Requirements gathering and solution alignment, • Providing technical leadership across the full delivery life cycle, • Mentoring and developing capability within the team (particularly junior engineers), • Driving engineering best practice and continuous improvement, • Engaging with key stakeholders across Architecture, Service Management and Senior Leadership, • Managing and coordinating third-party suppliers, • Balancing BAU and project delivery, setting direction across workstreams, • Strong experience delivering enterprise VMware Horizon environments, • Deep technical expertise across Horizon, vCenter, ESXi and UAG, • Experience with DEM, App Volumes and image life cycle management, • Strong understanding of security hardening aligned to CIS, NIST or similar frameworks, • Good working knowledge of Active Directory, DNS, DHCP and networking fundamentals, • EUC endpoint design (thin/zero/thick clients across Windows or Linux), • Secure desktop environments (eg Windows 11, BeCrypt Paradox), • Microsoft infrastructure services (AD DS/AD FS), • Cisco networking environments, • Opportunity to work on a greenfield, high-security platform, • Real ownership and influence over technical direction, • Exposure to complex, large-scale environments Apply now or get in touch for a confidential discussion. Lead VDI Engineer (Omnissa/VMware Horizon) - Defence/Secure Platforms Farnborough (On-site) DV Clearance (eligibility required) (5 years UK residency) £70,000 - £100,000 + Bens + Car Allowance + Company Bens

Job Title: Senior Network Engineer – Advanced Technology Location: Farnborough (Onsite) Salary: £DOE Key Skills: Network Engineering, Design, LAN, WAN, Routing, Switching, CISCO, Palo Alto, Dell, VMWare, NSX Are you ready to work at the forefront of advanced technology, delivering solutions that truly make an impact? We are partnering with a leading organisation at the cutting edge of defence and innovation, seeking a Senior Network Engineer to join a highly skilled engineering team. This is a unique opportunity to work on complex, high-assurance systems alongside some of the brightest minds in the industry, helping shape the future of secure, scalable network infrastructure. The Role As a Senior Network Engineer, you will play a key role in delivering engineering excellence across enterprise-scale environments. You’ll provide deep technical expertise, lead from the front on complex solutions, and ensure systems are secure, resilient, and aligned with long-term strategic goals. Key Responsibilities • Lead the design, implementation, and support of enterprise-grade network solutions, • Take ownership of complex technical deliverables, ensuring performance, scalability, and quality, • Provide technical leadership and mentoring to engineers at varying levels, • Collaborate with architects and senior stakeholders to align solutions with strategic objectives, • Represent engineering in cross-functional discussions, influencing technical direction, • Contribute to technology roadmaps and continuous improvement initiatives, • Ensure compliance with security, performance, and operational standards, • Identify and mitigate risks across engineering delivery and live services What We’re Looking For • Strong experience across large-scale, multi-site enterprise networks (LAN, WAN, datacentre, hybrid/cloud), • Deep knowledge of routing and switching protocols (BGP, OSPF, VXLAN, EVPN, Wi-Fi, 802.1x), • Hands-on experience with technologies such as Cisco (Catalyst/Nexus/WLC/Meraki), Palo Alto, Dell, F5, • Experience with network security solutions, including firewalls, IDS/IPS, and access control, • Exposure to software-defined networking and virtualisation (e.g. VMware NSX-T), • Experience or awareness of network automation in collaboration with development teams, • Ability to lead technically while working collaboratively across engineering teams Qualifications • CCNP (or equivalent industry experience) Additional Information • 37-hour working week, based on-site in Farnborough, • Working hours fall between 07:30 – 18:30 (shift-based coverage), • Participation in an on-call rota is required to support high service availability and incident response Why Apply? • Work on mission-critical, cutting-edge systems, • Be part of a collaborative, high-performing engineering environment, • Influence the design and delivery of future-focused technology solutions, • Opportunities for technical leadership and career progression If you are a technically strong Network Engineer looking to step into a senior, influential role within a secure and innovative environment, this is an opportunity worth exploring. Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy

Senior Mechanical Engineer -Perm -Camberley -£50k-£65k Our well-established engineering client is seeking a Senior Mechanical Engineer to join its team. This is a broad, hands-on role combining design, project delivery, and cross-functional coordination across engineering, production, sales, and external stakeholders. Reporting to the Engineering Manager, you will take ownership of projects from initial specification through to delivery, ensuring high engineering standards, cost control, and timely execution. Key Responsibilities of the Senior Mechanical Engineer * Lead full lifecycle delivery of engineered systems, from design through to dispatch and commissioning. * Work with customers to define specifications, prepare quotations, and support commercial activities. * Produce fabrication/manufacturing drawings and specify components and suppliers. * Manage subcontractors and procurement activities, including raising purchase orders. * Develop inspection and test plans, carry out final inspections, and support system testing. * Maintain project cost tracking to protect margins. * Support shipping processes and ensure all documentation is accurate and delivered on time. * Contribute to commissioning activities, including occasional site visits (UK and international). * Ensure compliance with relevant standards (including CE, ATEX, PED) and good engineering practice. * Support new ...

Maintenance Engineer Making sure you fit the guidelines as an applicant for this role is essential, please read the below carefully. Panama Shift Pattern, rotating days and nights, 12h shifts, 6am - 6pm, 6pm - 6am Peterborough This is a great opportunity to join our team, bringing to life our future condiments manufacturing facility, located in Peterborough, UK. Our vision is to build a sustainable, innovative McCormick factory-of-the-future to support our Flavour Solutions customers. MAIN RESPONSIBILITIES • Continuously assess company plant and equipment for efficiency, purpose and implement improvements so that output will be optimised, inform of non-compliances., • Use line monitoring, fault finding and problem-solving systems/techniques to maximise utilisation of all company plant and equipment, by minimising downtime through scheduled, planned, or ad hoc maintenance, and continuous improvement., • Liaise and work closely with the production team enabling timely start-up of plant., • Work safely, complying with the obligations under Health and Safety regulations., • Study production schedules and estimates work hour requirements, for completion of job assignment., • Confer with production, materials supervisors, and process technicians to coordinate activities., • Prepare estimates, requisitions, and inspection routes for equipment., • Manage small projects and assists with major projects when required., • Regularly carry out audits for compliance to AIB / EFSIS / GMP Standards., • Understand own responsibilities regarding food safety legislation, including HACCP, and carry out work accordingly., • Work with Production and Quality teams to improve and develop operating practices to enhance product quality and customer service., • Ensure full compliance with Company Quality, Food Safety, Health & Safety and Environmental requirements., • Organise work activities to ensure the no contamination of product., • Ensure the safety of our product is not compromised in any way., • Coordinate the activities of outside Engineers, Contractors, and Vendors., • Complete all work undertaken, in a timely manner, and achieve deadlines., • Minimum NVQ Level 3 or equivalent in relevant Engineering Discipline., • Working experience in production environment (food or consumer products industry preferred), supported by a good track record of acquiring Engineering skills, continuous learning., • A good understanding of inter-discipline skills and multi-skilling., • A solid grounding in food handling safe practices., • An awareness of HACCP, PUWER, LOLA and COSHH., • Have a working knowledge of AC/DC drives and associated control equipment., • Good written and verbal communication skills ability to deal with both suppliers and internal customers., • PC literate (Experience of MS Word, Lotus Notes and Excel Spreadsheets)., • Problem solving and fault-finding skills., • Able to interpret schematic diagrams., • Able to work on own initiative and highlight continuous Improvement opportunities., • Positive and enthusiastic attitude towards work and colleagues, able to work in a team., • Possess the energy and drive to get things done in a timely manner., • Good understanding of various types of PLC including Allen Bradley, Schneider, and Siemens. McCormick & Company is an equal opportunity/affirmative action employer. xrnqpay All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, colour, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As users of the disability confident scheme, we guarantee to interview all disabled applicants who meet the minimum criteria for the vacancy/ies.

About The Role Scroll down for a complete overview of what this job will require Are you the right candidate for this opportunity Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career; with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in afriendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? At M Group Telecom, were enabling and enhancing telecom networks, playing a lead role in the delivery of our tech enabled future. We deliver full network cycle services for fixed, private and mobile operators. Private networks- We find the best technology, manage assets and refresh systems. With 24/7 network operations, we keep things running smoothly, while operating comprehensive network repair and maintenance to keep everything in top shape. Want to come and be a part of it? As a Mechanical & Electrical Engineer, youll play a key role in maintaining and enhancing our critical private telecom infrastructure. This role is primarily remote, with regular travel expected across the UK to support sites and projects as required. Youll work across complex live environments, collaborating with engineering and project teams to keep the network resilient and future-ready. Well rely on you to lead during incidents and drive continuous improvement activity, and youll be required to take part in a one-in-two-weeks on-call rota to provide out-of-hours support. What will you be doing? Youll act as our third-line technical escalation point, stepping in when complex mechanical and electrical incidents impact live private telecom networks. Well rely on you to take full ownership of high-impact and non-standard faults, leading them through to complete resolution while driving thorough root cause analysis for major incidents. Working with deep expertise across AC/DC power systems, UPS, generators, HVAC and associated controls, youll help us design, review and continuously improve the mechanical and electrical infrastructure that underpins our networks from data centres to street cabinets. Together, well ensure our estate remains resilient, compliant and scalable for the demands of today and the growth of tomorrow. Youll work closely with project teams, field engineers and third-party partners on upgrades, refreshes and technical remediation, while also supporting and mentoring first- and second-line NOC engineers to raise overall capability across the business. Well count on you to develop and optimise monitoring through PMS, EMS and BMS platforms, contribute to technical standards and documentation, and proactively identify risks and opportunities for continuous improvement across the estate helping us build a smarter, stronger and more reliable network. What youll bring? • Youll bring a strong understanding of telecom power systems, including AC/DC power, rectifiers and inverters, helping us keep critical infrastructure stable and resilient., • Youll have hands-on experience with AC and AHU systems, generator systems and a range of cooling technologies, ensuring environments are optimised for always-on networks., • Youll combine strong problem-solving and analytical abilities with solid project management skills, allowing us to plan, deliver and resolve complex technical challenges effectively., • Youll be comfortable working with PMS, EMS and BMS platforms, helping us proactively monitor, control and optimise our estate., • Youll have proven UPS experience, supporting continuity of service across critical network and data environments., • Matched or contributory pension scheme, • Online GP service, 24 hours a day, 365 days a year, • Employee assistance programme, • My Rewards portal, access to 1000s of retail discounts, • Life assurance, • Cycle to work, salary finance and give as you earn schemes, • Enhanced maternity, paternity leave and adoption leave, • Reward and recognition schemeIn addition, this role offers;, • On call & Overtime, • Company car and fuel card with a range of EV and hybrid vehicles to choose from, • My Car Choice our salary sacrifice EV/ Hybrid car scheme, • Health Care Cash Plan, giving you the ability to claim back medical expenses for things like dental, eyecare and physiotherapy and much more!, • 25 days annual leave plus bank holidays, • Wereresponsibleand go further for our people, clients, communities and the planet, • Wereopenand seek new and better ways of exceeding expectations, • Weretogetherand as one team; the whole is greater than the sum of the parts #MGROUPTINDNAT

A SERVICE ENGINEER is sought by a leading food process machinery company, to service, repair, and join in maintenance, commissioning and installation ofsystems in the UK and (ONLY when safe) Overseas. Be one of the first applicants, read the complete overview of the role below, then send your application for consideration. Systems are typically oil fired or gas fired burners and combustion systems, used in many different food factories, but also similar to many industrial process gas burners used in the offshore, flare, combustion engineering, etc. And if you've worked as a Maintenance Engineer in a food process factory, you've probably seen them already. Who?It could appeal to a Midlands based food industry maintenance engineer wanting a mobile role and wanting to earn really well-oran industrial burner / industrial heater, flare gas, incinerator, heat exchanger, combustion, maybe furnace engineer, ideally some PLC experience, mechanical or electrical qualifications seeking a change. The company has a huge range of sites and machines installed in the UK and overseas-- travel, and jet travel are to be expected. BUT overseas travelonly when safe to do so.For more details of their travel policy, call me for a chat. Salary:As well as a good range of benefits, salary of mid-£40K's, the engineers earnat leastanother £20K from premium rate paid overtime, plus bonus and company car. Not a flash in the pan- theyallearn this year in, year out. Interested?Please send a copy of your CV to Mark Burnard of Hartland Recruitment ASAP for more details. xrnqpay Hartland Recruitment- a technical recruitment company specialising in finding Engineers for the UK Automation, Process Control Systems and Machinery Manufacturers since 1990. Looking for your next job in Electrical, Mechanical Design, Service Commissioning Engineering, or PLC HMI SCADA control? Send me your CV.

Electrical Design Engineer 6 month contract Based in Farnborough Offering £27.82ph Inside IR35 Do you have experience using SolidWorks Electrical toolset? Do you have experience in the Aviation industry? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Support Avionics and Systems Engineering teams in developing and maintaining the production design record for new concepts and design changes, • Produce detailed electrical design solutions using SolidWorks Electrical, • Select appropriate electrical components to satisfy schematic and system-level requirements, • Act as a key contact for electrical design queries across engineering and production, • Provide hands-on support to the build line in resolving emerging electrical issues, • Help manage design changes in line with configuration and change control processes, • Collaborate with Production...

Chiller Engineer If you want to know about the requirements for this role, read on for all the relevant information. Cambridge £55,000 per annum An industrial and commercial cooling specialist, focused on designing, installing and servicing bespoke process cooling and chiller systems for a wide range of sectors including manufacturing, food & beverage, pharmaceuticals and data centres. With over 20 years of experience, they deliver advanced temperature control solutions from water chillers, free coolers and adiabatic systems and cooling towers Known for technical expertise, energy-efficient design and tailored solutions that keep critical processes running reliably, the company also offers turnkey project delivery and long-term service contracts to help customers optimise performance and up time. Key Responsibilities: Work as an individual, diagnosing and repairing a range of refrigeration systems. Be part of a regional service team. Communicate directly with our customers whilst on site. Cover standby duties on a rota. Package: Basic - £45,000 per annum Overtime, door to door & on-call pay 33 days annual leave Pension scheme Continuous training Opportunities What You'll Need: Strong understanding of commercial refrigeration F-Gas certification (C&G 2079) Excellent communication and time management A strong work ethic, with Health & Safety awareness Interested in hearing more? Call Peter Caulfield on or Email WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. xrnqpay WR is acting as an Employment Agency in relation to this vacancy.

Lets start with the bit engineers actually care about. Find out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now. You finish workFriday morning at 06:00. You dont come back untilSunday night at 22:00. Thats aproper long weekend every week. No Friday nights. No Saturday shifts. No Sunday daytime. Just solid nights and two and a half days off. The Job This is amulti-skilled maintenance engineer rolein a busy manufacturing environment. Your focus is simple: Keep the plant running. Fix problems quickly. Stop them happening again. Youll be working closely with production and the wider engineering team to: Fault find and repair electrical and mechanical breakdowns Carry out planned preventative maintenance Improve reliability and reduce downtime Support continuous improvement across the site Electrically youll be working on things like: Single & three phase systems Sensors and control systems AC motors / servo motors Some PLC fault finding Mechanically youll get involved with: Gearboxes Drives and rollers Shafts and bearings Pneumatics and hydraulics Nothing overly glamorous. Just solid engineering work on a busy site. The Package Salary:£47,000 Nights premium:£6,000 Total package:£53k Benefits include: Private healthcare Discounted gym membership Perkbox discounts (shopping, cinema, food etc) 24/7 GP access & wellbeing support Company pension Free parking Career progression and training Holiday:23 days + bank holidays Because shifts are12 hours, thatsover 280 hours of leave per year, which is actuallymore than a standard 28 day contract. You also get afixed Christmas shutdown. The Person Youll probably be: Amulti-skilled maintenance engineer Electrically biased ideally NVQ Level 3 qualified or time served Comfortable fault finding on production machinery Manufacturing experience is key. The Company This business operates across multiple UK sites. Theyre well established, financially stable, and continue to invest in their engineering teams. In other words: Its not a startup. Its not chaos. Its a proper manufacturing business. xrnqpay If youd like to know more, apply or drop me a message and Ill happily talk you through the role.

1825 / 1826CW Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. Derby / Grangemouth Join Our Team as a System Integration Engineer Are you passionate about delivering innovative control system solutions and eager to work on impactful infrastructure projects? As a System Integration Engineer, you will play a critical role in designing, developing, testing, and commissioning control systems that support vital industries such as Water & Wastewater, Power & Energy, and more. This is an exciting opportunity to be part of a leading UK-based multidisciplinary contractor, supporting your growth while making a real difference in infrastructure services. Required Skills: • Hands-on experience with Rockwell, Mitsubishi, or Schneider control systems, • Strong background in Water & Wastewater treatment projects, • Proficiency in interpreting client standards and user requirements, • Excellent communication skills and solid project management abilities, • Practical, commercially aware approach to engineering solutions, • Industry-recognized training or qualifications in control systems engineering, • Willingness to undertake site visits across the UK

Security Engineer Location: Cambridge & surrounding areas Salary: From £40,000 DOE Overtime | Call-out rota | Permanent role Im currently supporting a well-established, NSI & BAFE approved security provider operating across Cambridge and the surrounding areas. If you are interested in applying for this job, please make sure you meet the following requirements as listed below. Due to ongoing growth and contract demand, theyre looking to add an experienced Security Engineer to their regional team. This is a full-time, permanent position offering solid earning potential, paid overtime and long-term job security with a respected name in the industry. The Role Youll be working across a range of electronic security systems, including: Installation of intruder alarm systems Preventative maintenance visits Fault finding and reactive breakdowns Occasional servicing cover during holiday or sickness periods Small associated remedial electrical works where required This role is ideal for an engineer who enjoys being hands-on, is confident fault finding and can manage their workload independently. What Theyre Looking For Proven experience installing and servicing intruder alarm systems Background within the electronic security industry Strong diagnostic and fault-finding skills Knowledge of Risco intruder systems highly advantageous Experience with Access Control, CCTV and Fire Alarms beneficial Reliable, self-motivated and keen to continue developing Good written and verbal communication skills Minimum 1 year experience with electronic security and/or fire systems Full UK driving licence Salary, Travel & Benefits Basic salary starting from £40,000, dependent on experience Overtime available Call-out rota included Travel: Any travel exceeding 1 hour to site and 1 hour from site is paid as overtime. Holiday entitlement: 20 days holiday, rising to 25 days with length of service Interested? xrnqpay If youre a Security Engineer based in or around Cambridge and youre looking for a role that offers stability, fair travel policies and strong earning potential, Id be keen to speak with you. Apply now or send over your CV and contact details for a confidential conversation about this role or similar opportunities in your area.

PLC Engineer Before applying for this role, please read the following information about this opportunity found below. About the Role Were seeking an experienced PLC Control Systems Engineer (510 years) to design, program, test, and commission industrial control systems across power solutions projects. Including diesel generator controls, switchgear/ATS/AMF panels, load sharing/synchronisation, and associated HMI/SCADA interfaces. The role spans the full project lifecycle (FDS/DDS, coding, FAT/SAT, on-site commissioning), working closely with electrical design, project managers, and clients to deliver robust, safe, and maintainable systems that meet industry standards. Key Responsibilities 1. Design & Development Produce and own control system deliverables: User Requirements (URS), FDS, DDS/SDS, I/O lists, Cause & Effect, alarms, and test plans. Develop PLC/HMI/SCADA applications to internal coding standards and client specifications. Configure and integrate generator controllers (Deep Sea Electronics (DSE), ComAp, Woodward), synchronising and load-sharing schemes, ATS/AMF logic, and black-start/priority management. Interface PLCs with protection relays, meters, breakers, UPS, and BMS/EMS systems. Collaborate with electrical design for wiring schematics (e.g., EPLAN/AutoCAD Electrical) and panel build liaison. 2. Testing & Commissioning Lead FAT/SAT, I/O checks, loop testing, simulation, and site commissioning. Troubleshoot PLC, HMI/SCADA, and comms networks; implement robust fixes and design improvements. Produce handover packs, as-built software, change logs, and training for end users (O&M). 3. Documentation, Quality & Compliance Maintain version control, change management, and code libraries (e.g., Git-based workflows). Ensure compliance with functional safety and electrical standards where applicable (e.g., IEC 60204-1, SIL principles/IEC 61511), PUWER, and Machinery Directive/UKCA. Contribute to RAMS for site works; uphold ISO 9001 quality procedures and good engineering practice. 4. OT Networking & Cybersecurity Design and commission industrial Ethernet networks (managed switches, VLANs, NAT, routing). Implement and document secure architectures and segmentation, harden PLC/HMI/SCADA assets, and apply password/backup policies and access controls in line with best practices. Configure and troubleshoot common industrial protocols: Modbus TCP/RTU, Profinet, Profibus, EtherNet/IP, OPC UA; (nice to have: IEC 61850, DNP3). 5. Continuous Improvement & Support Mentor junior engineers, contribute to coding standards, reusable function blocks, and templates. Provide remote and on-site support, root-cause analysis, and preventive maintenance recommendations. Suggest design enhancements for reliability, maintainability, and lifecycle cost reduction. Technical Skills PLC / HMI / SCADA Allen Bradley, Siemens TIA Portal (SCL/ladder), WinCC/Unified; Rockwell Studio 5000 (Ladder/Structured Text), FactoryTalk View. Optional: Schneider EcoStruxure, Mitsubishi GX Works, Beckhoff TwinCAT, AVEVA/Wonderware, Ignition. Must have written system code from conception / from design. Generator & Power Integration DSE/ComAp/Woodward controller integration, breaker control, load management, protection interfaces. Familiarity with UPS systems, power meters, and protection relays. Networks & Protocols Layer-2/3 concepts, VLANs, NAT, routing, industrial firewalls; Modbus, Profinet, Profibus, EtherNet/IP, OPC UA. Electrical & Safety Read/mark up schematics, panel layouts, and cable schedules. Awareness of IEC 60204-1, functional safety (SIL concepts), BS 7671 principles, PUWER; RAMS. Qualifications & Certifications (Desired) Degree/HND in Electrical, Electronic, Control/Automation, or Mechatronics Engineering (or equivalent experience). ECS/CSCS or safety passports. Full UK driving licence and ability to work on client sites. Nice to have: Functional Safety awareness (e.g., TV), CompEx/ATEX awareness where applicable. Personal Attributes Methodical, safety-first, and quality-driven, strong attention to detail. Clear communicator with clients, site teams, and non-technical stakeholders. Proactive problem solver, comfortable under time pressure during commissioning. Team player who can also work independently and mentor others. Willing to travel to sites across the UK Benefits Competitive salary £65,000£70,000 Company pension; 25 days holiday & bank holidays. Company laptop & mobile phone. Training & certification support (APM/PRINCE2/18th Edition/Siemens/Allen-Bradley). Professional membership support (IET/APM). Flexible site travel expenses. Private health care (post probation) Working Pattern 70% Office/ 30% site as needed by projects. UK travel to customer sites, factories, and FAT locations. Equal Opportunities We are an equal opportunities employer and welcome applications from all suitably qualified individuals. xrnqpay Candidates must have the right to work in the UK, have a British passport or settlement status.

Keywords: Field Service Engineer, Electrician, Installation Engineer, Gas Detection Systems, Calibration, Commissioning, Electrical Installation, Control Panels, Sensors, Alarm Beacons, Testing, Documentation, National Travel, UK-Based, Overnight Stays, Commercial Electrical, Industrial Electrical,

Maintenance Engineer (Electrical Bias) If you are interested in applying for this job, please make sure you meet the following requirements as listed below. Location: March- Cambridgeshire Salary: £45,000£47,500 Hours: MonFri, 42 hrs (On call 1 in 5, or TOIL) Contract: Permanent, Full time Were looking for an electrically biased Maintenance Engineer to support a busy renewable energy processing site. Youll handle planned and reactive maintenance, keep critical equipment running safely, and help improve overall plant performance. Key Duties of thisMaintenance Engineer position: • Maintain and repair electrical and mechanical equipment, • Complete planned maintenance and respond to breakdowns, • Diagnose faults, carry out inspections, and log work accurately, • Support project work, contractor supervision, and stock control, • Level 3 engineering qualification (electrical preferred), • 18th Edition, • 1 year maintenance/engineering experience, • Able to read engineering drawings, • Experience with maintenance systems and permit to work Telehandler/Forklift/MEWP Welding/fabrication skills Benefits: • Pension, life assurance, health & wellbeing support, EAP, cash plan, cycle to work, extra leave options, sick pay, onsite parking, recognition schemes, referral bonus., • Salary & Progression: INDMAN

FM33268 The experience expected from applicants, as well as additional skills and qualifications needed for this job are listed below. Electrical Generation Engineer - CHP Up to £50,000 (DOE) South of England Alecto Recruitment is working with a leading power generation and energy company who are seeking an Electrical Generation Engineer to support electrical maintenance, commissioning, and system optimisation across sites in the South of England. Key Responsibilities & Tasks • Carry out electrical maintenance, fault finding, and repair on generation assets and control systems., • Support commissioning, testing, and integration of new plant and facilities into operations., • Diagnose control system faults, including PLC logic and signal issues, and implement solutions., • Inspect, maintain, and operate LV/HV electrical equipment (subject to competency)., • Upgrade and replace control systems and electrical components where required., • Support and develop Operations staff through training, guidance, and supervision., • Ensure compliance with company procedures, NICEIC standards, and H&S legislation., • Manage electrical projects, including scoping works and supporting project delivery., • Maintain accurate documentation, reports, and commissioning records., • Strong experience in electrical maintenance, control systems, and commissioning., • Experience with CHP, gas engines, and/or solar systems., • Knowledge of generator control systems (e.g. CAT, MAN, MTU, etc)., • Experience with electrical systems (12V DC - 415V AC, 3-phase)., • Proven fault finding and PLC diagnostic skills., • 18th Edition and testing/inspection qualifications (2391 desirable)., • HV AP/SAP (desirable). To apply for this role please send your CV to or call ext 220 to discuss. xrnqpay Equally if this role would not be of interest to you but may be suitable friend or colleague, we can offer paid referral fees for successful placements.

Belcan Workforce Solutions are recruiting for a Scada Engineer - ADMS Energy systems. 12 month - Inside IR35 contract role. UK remote based with trips to UK & Europe offices as required. Job Description We're looking for a Scada Engineer to connect our customers with our technologies and products. Our team is involved in ADMS (Advanced Distributions Management System) related projects, tackling problems ranging from analysing data to providing solutions for varied customer business requirements. Our product is deployed in distribution companies worldwide and is leading in the growing market of Energy Utilities. Our software solutions deliver reliability, productivity, innovation, and efficiency through a modular architecture, adaptive algorithms, predictive analytics, and a brilliant user experience. Roles and Responsibilities Lead and manage the migration of SCADA systems into ADMS platforms. Leverage your expertise to ensure smooth transitions and integration of legacy systems into new ADMS SCADA environments. Install and configure SCADA simulation systems to support testing, training, and operational simulations. Ensure accurate modelling of SCADA environments to meet system requirements. Handle the installation and configuration of Front-End Processors (FEP) and Enhanced Front-End Processors (EFEPS), ensuring seamless communication between SCADA systems and remote devices. Conduct thorough SCADA testing, validating the system's functionality, performance, and reliability. Identify and resolve issues, ensuring the system meets operational requirements. Provide expert consultancy to clients, delivering workshops and training sessions to enhance their understanding and utilisation of SCADA systems. Share best practices and ensure clients are equipped to manage and optimize their SCADA environments. Lead the deployment and commissioning of ICCP (Inter-Control Centre Communications Protocol), ensuring proper integration of multiple control centres and seamless data communication. Stay current with emerging SCADA protocols and technologies, continuously expanding your knowledge to ensure the implementation of the latest best practices and industry standards. Required Skills & Experience: Extensive experience in ADMS SCADA migration and integration. Proven expertise in the installation and configuration of SCADA simulation systems. Solid knowledge of Front-End Processors (FEP) and Enhanced FEPs (EFEPS) installation and configuration. Strong hands-on experience in SCADA testing, troubleshooting, and optimisation. Experience providing consultancy, workshops, and training to clients on SCADA systems. Practical knowledge of ICCP deployment and commissioning. Passion for learning and staying updated on new SCADA protocols and technologies. Strong problem-solving and analytical skills. Excellent communication and customer-facing skills. Preferred Qualifications: Familiarity with a variety of SCADA protocols (e.g., IEC 61850, DNP3, Modbus, etc.). Experience with SCADA systems in the energy or utilities sector is a significant advantage. Any experience working with ADMS, OMS, and DMS systems in utility or energy sectors. Relevant certifications in SCADA systems, ADMS, or energy management technologies. xrnqpay Ability to work independently and in cross-functional teams. This vacancy is being advertised by Belcan Do you have the right skills and experience for this role Read on to find out, and make your application.

Lead / Senior Control Systems Engineer If the following job requirements and experience match your skills, please ensure you apply promptly. As a Lead / Senior Control Systems Engineer, you will work closely with our Regional Commerical Manager, you will be responsible for the full life cycle delivery of the project in both technical compliance and quality, from design and development through to programming, testing, and commissioning. As a Lead / Senior Control Systems Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers who you will be responsible for managing and motivating to get the best delivery output. This may include mentoring any graduates and apprentices and helping to continue building a strong and capable team in our Peterborough office. Our ideal candidate will have the knowledge and experience to help the office and team grow. The ideal candidate will have previous experience in a similar environment and good knowledge of PLC's, SCADA, HMI, variable speed drives and instrumentation products. Full-time position: 37.5 hours per week, Monday to Friday. This is a hands-on senior engineering role where you will: • Work closely with clients to develop solutions and ensure high-quality project delivery., • Lead and mentor our highly skilled engineers, including graduates and apprentices, to help the team perform at its best., • Design and implement advanced control systems using PLC, SCADA, and HMI technologies., • Lead the design, development, and commissioning of control systems, • Attend client meetings, conduct site surveys, and provide technical leadership, • Programme and configure PLC and HMI/SCADA software (Siemens, Rockwell, Mitsubishi, Wonderware/ AVEVA, ClearScada/ GEOSCADA etc.), • Produce detailed project documentation and ensure technical compliance, • 5+ years' experience in a Senior or Lead Control Systems Engineering role,, • Degree in Software or Electrical Engineering, or equivalent qualifications, • Mentoring or team leadership experience, • Proven ability to design and modify PLC and SCADA/HMI software, • Experience with Allen Bradley, Siemens, Mitsubishi, or Wonderware systems (other platforms also considered), • Experience in producing detailed documentation, and client communication, • Instrumentation and Electrical experience would be preferable, • Auto enrolment pension scheme (including salary sacrifice/exchange for pension payments if desired), • Private health scheme (after 1 year service), • Death in service plan (after 5 years service), • 25 days holiday plus bank holidays (raises to 30 days after 5 years of service), plus a holiday trading scheme, • Company car scheme, • Access to our Wellbeing programme operated through COGG ( ), • Access to 24/7 365 days confidential employee counselling service, free for employees and their families, • Access to our Training Hub (various training courses available), • Annual personal development and salary reviews, • Free parking at all our offices (Subject to availability & any company parking policies or parking rotas that may be in effect), • Access to company vans or pool cars, • Access to Perkbox ( ) This gives employees access to discounted shopping, eating out, cinema and even holidays, • Free quarterly social events, team building days and Christmas party weekend break. At Adsyst Automation Ltd we understand that our continued success is down to our dedicated team, therefore, we invest time and effort in each individual; training and assisting with their personal and professional development, encouraging their strengths while offering a good work/ life balance. Adsyst Automation Ltd has been providing complex Control Systems for Process Control, Automation and Telemetry to customers worldwide for nearly 40 years. We have four offices nationally; our Head office in Yateley, Hampshire, our Stafford office and a further two offices in Peterborough and Greater London. With our core skills lying in PLC, SCADA, HMI, MIS, MES, RTU, control system software engineering, data acquisition, bespoke software and LV Assemblies and Electrical installation, our expertise in panel building and electrical installation allows us to offer full turnkey solutions. We approach each project with a fresh outlook and use our knowledge and partnerships to stay a step ahead of the competition, offering the most advanced, innovative and cost-effective solutions. As we continue to expand and attract top talent, we remain dedicated to maintaining a supportive and inclusive work environment. We value diversity and believe that different perspectives and backgrounds contribute to our collective success. We strive to foster a culture of respect, collaboration, and inclusivity, where every team member feels valued and empowered to make a meaningful impact. xrnqpay Other positions are available in this office and other locations. See our website for more information:

Also known as: Service Manager, Maintenance Manager, Contracts Manager, Service Operations Manager, Mechanical Services Manager, HVAC Supervisor Increase your chances of an interview by reading the following overview of this role before making an application. Overview An established HVAC contractor is looking to appoint a Service & Maintenance Manager to take ownership of its service division. The business operates across ventilation and air conditioning, with an existing client base and a strong pipeline of ad hoc and contract work. This role has been created to support planned growth and bring structure, commercial control, and leadership to the department. The Role You will be responsible for the day-to-day management and development of the service and maintenance function, covering ventilation and air conditioning systems. Key responsibilities include: • Managing service and maintenance contracts from enquiry and tender through to delivery, • Overseeing a key long-term contract within a large-scale estate environment, • Leading a team of engineers, • Pricing, quoting, and scoping service, maintenance, and small works, • Coordinating reactive and planned maintenance activities, • Maintaining service delivery standards across AHUs, ductwork, and AC systems (split, VRF/VRV), • Acting as the main point of contact for clients and ensuring ongoing relationship management, • Proven background in HVAC service and maintenance (ventilation and/or air conditioning), • Technically competent across systems such as AHUs, ductwork, and AC (split, VRF/VRV), • Experience in pricing and quoting service or small works, • Previous supervisory or management experience, or stepping up from a senior engineer position, • Strong organisational and communication skills, • Commercial awareness and ability to manage client relationships, • Salary: circa £45,000 - £55,000, • Office-based role, • 22 days holiday + bank holidays, • Company pension, • Clear opportunity to build and grow a service division WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. xrnqpay WR is acting as an Employment Agency in relation to this vacancy.

Keywords to support your application: Security Engineer | Security Service Engineer | Security Install Engineer | CCTV Engineer | Intruder Alarm Engineer | Access Control Engineer | IP Security Systems | Security Systems Engineer | 18th Edition | Central London Engineer | Fire and Security | Fire Al

A security solutions provider is seeking a Security Systems Engineer located in Farnborough. The role involves installation and maintenance of CCTV, access control, and intruder alarm systems, with clear responsibilities for Planned Preventative Maintenance and reactive callouts.

This role focuses on the installation and commissioning of integrated security systems, including CCTV and Access Control. A leading security solutions provider in the UK seeks a Project Engineer to join their team.

Familiarity with control systems, including programmable logic controllers, supervisory control and data acquisition and instrumentation software. Electrical Control and Instrumentation Engineer. As an Electrical Control and Instrumentation (EC&I) Engineer, you’ll have a role that’s out of the o

We are seeking an experienced FPGA Engineer to join a collaborative engineering team developing advanced electronic systems used in high-performance, security-focused environments. This role offers the opportunity to work on technically challenging programmes where FPGAs play a central role, supporting applications such as high-speed data processing, complex algorithm implementation, embedded security functions, system-level integration within modern hardware platforms. You will work alongside engineers across firmware, software, systems, and hardware disciplines, contributing to innovative solutions in a structured, quality-driven development environment. The team operates using modern development practices, including advanced toolchains and Continuous Integration workflows. Key Responsibilities Design and develop FPGA solutions using VHDL Deliver efficient implementations with strong focus on timing closure and device optimisation Target AMD FPGA and SoC devices, including use of the AXI protocol Perform simulation using Siemens QuestaSim Apply modern verification approaches (e.g. OSVVM, CoCoTB) Use AMD toolchains (ISE and Vivado) Develop and maintain scripted build processes using TCL and/or Python Work within Git-based version control systems Support Continuous Integration environments (e.g. GitLab, Docker) Produce clear technical documentation Contribute to process improvement and engineering best practice What We’re Looking For Strong background in FPGA design using VHDL Experience with AMD FPGA/SoC platforms Solid understanding of FPGA architecture, optimisation techniques, and timing analysis Experience with simulation and verification methodologies Familiarity with automated build and CI workflows Good documentation and communication skills A proactive, adaptable approach with the ability to work independently and collaboratively Development & Environment You will join an established firmware community with a strong emphasis on: Technical mentoring Knowledge sharing Continuous professional development Toolchain and workflow modernisation Collaborative problem-solvingComprehensive training and close technical leadership will be provided to support your growth and mastery of internal development processes. Benefits Competitive salary with sign-on bonus. Flexible or part-time working arrangements on request. Relocation support available. Half-day finish on Fridays. 25 days holiday (plus bank holidays), increasing with service, with option to buy/sell. Private medical insurance (optional family cover). Life assurance and group income protection. Flexible extras including healthcare cash plan, dental insurance, gym membership, cycle-to-work scheme, and electric vehicle scheme. Employee assistance program for mental health and wellbeing support. Eligibility Due to the nature of the programmes involved, candidates must: Hold the right to work in the UK (Sole British citizenship) Be eligible to obtain the required security clearance TT

Robot Automation Engineer Farnham, Surrey, UK Day Shift | Permanent | Early Finish Fridays £40,000 – £45,000 per annum + monthly bonus WF Tech are proud to be representing a long-established, family-owned control engineering manufacturer based in Farnham, Surrey. With a global reputation for quality and reliability, our client designs and manufactures high-performance engineered products for demanding industrial applications worldwide. This is a secure, permanent opportunity within a friendly and supportive working environment. With high staff retention and a collaborative culture, the business is committed to continuous improvement, investment in technology, and long-term career development. We are seeking an experienced Robot Automation Engineer to join their busy manufacturing team. The Role Based in Farnham, this position supports two manufacturing sites located approximately six miles apart. You will work closely with Production Engineers, the Maintenance Team, and Design Engineers to deliver both strategic automation projects and day-to-day operational support. This role offers a technically varied, hands-on environment where you will take ownership of automation projects from concept through to full integration. Key Responsibilities ⦁ Identify and develop automation opportunities across manufacturing operations ⦁ Design robotic cell layouts for loading and unloading CNC machining centres ⦁ Manage automation projects from concept through to full integration ⦁ Collaborate with the Design Team to develop and optimise end-of-arm tooling, fixtures, and infeed/outfeed systems ⦁ Program and integrate robotic systems (Fanuc and ABB) with CNC machines ⦁ Support commissioning and system integration alongside the Maintenance Team ⦁ Drive process improvements to enhance productivity, efficiency, and quality ⦁ Work cross-functionally to deliver best value to the business and customers ⦁ Troubleshoot production breakdowns ⦁ Support automation training for apprentices, junior engineers, and operators About You You will be a proactive and solutions-focused engineer who enjoys working in a collaborative manufacturing environment. Essential: ⦁ Level 3 Engineering qualification and/or completed apprenticeship ⦁ Proven robot programming experience (Fanuc and ABB advantageous) ⦁ Basic CNC programming experience ⦁ Ability to read and interpret engineering drawings and geometric tolerances ⦁ Experience managing automation projects at cell level ⦁ HMI programming and management experience ⦁ Good understanding of machining processes and work holding methods ⦁ Full UK driving licence ⦁ Strong communication skills with a positive, enthusiastic attitude Desirable: ⦁ Experience with 3D CAD systems (Fusion 360 and Siemens Solid Edge advantageous) ⦁ Experience with robot simulation tools (Roboguide and Robot Studio advantageous) ⦁ Experience with Renishaw spindle probing What’s on Offer ⦁ Salary: £40,000 – £45,000 per annum (dependent on experience) ⦁ Monthly bonus scheme ⦁ 25 days holiday plus statutory bank holidays ⦁ Permanent, full-time position (Monday to Friday, day shift) ⦁ Early finish on Fridays ⦁ Company pension ⦁ Free on-site parking ⦁ Stable, long-term career opportunity within a growing manufacturing business If you are an experienced Robot Automation Engineer looking for a role where you can make a tangible impact within a well-established engineering manufacturer, we would be pleased to speak with you. Please apply via WF Tech for a confidential discussion

Security Systems Engineer | Corsham / Farnborough | £55k + benefits We're recruiting on behalf of a well-established security systems contractor for an experienced Security Systems Engineer. If you've been working as an Electronic Security Engineer, Security Service Engineer or Field Service Engineer in the electronic security space, this is worth a look. The work is for a data centre client across two fixed sites — Corsham and Farnborough. If you're used to being sent anywhere and everywhere, this will feel different. Two sites, same client, proper routine. The role covers installation, maintenance and fault resolution across access control, CCTV, intruder alarms and intercom systems. Day-to-day you'll be doing PPM, reactive callouts, site surveys and some phone-based technical support. What they're looking for: Experience with CCTV and access control installation is essential. Familiarity with Lenel, Gallagher, C-Cure or Avigilon is a bonus but not a dealbreaker. ECS/CSCS card required. Full clean UK driving licence essential. SC/BPSS clearance will be required — if you can't get it, this one isn't for you. The honest bit: This is fully site-based — no hybrid. There's a compulsory out-of-hours rota (1 in 4 weeks). Hours shift between an 8am and a 9am start depending on the week. If you want flexibility, this probably isn't the right fit. If you want a stable role with a good employer and a proper package, read on. The package: £55k (DOE) + benefits | 1 in 4 out-of-hours rota with approved overtime | 30 mins paid travel | 24 days holiday plus bank holidays and your birthday, rising to 27 | Healthcare after probation | Pension | Ongoing training. Ideally you'll be based along the M3/M4 corridor — Reading, Newbury, Basingstoke or Swindon area suits the two sites well. If this sounds like you, apply below

Junior Electrical Design Engineer • 6 month initial contract, • Hybrid working for Farnborough, • £28 per hour Inside IR35 Key Skills: • SolidWorks, • PDM Systems Come work witrh a global leader in Stratospace. Based in Farnborough, the company manufactures, operates, and delivers services with its solar-powered, stratospheric platform. It's persistence enables continuous flight for months at a time. Its current flight-time record of over 67 days in the stratosphere. From above 60,000+ft, or 20km above ground, it can deliver several applications including direct-to-device connectivity and high-resolution Earth observation. Key Responsibilities Support Avionics and Systems Engineering teams in developing and maintaining the production design record for new concepts and design changes. Produce detailed electrical design solutions using SolidWorks Electrical. Select appropriate electrical components to satisfy schematic and system level requirements. Act as a key contact for electrical design queries across engineering and production. Provide hands on support to the build line in resolving emerging electrical issues. Support and participate in design maturity gate reviews in accordance with design processes. Help manage design changes in line with configuration and change control processes. Collaborate with Production and Procurement teams to ensure Design for Manufacture (DFM) considerations are addressed early in the lifecycle. Requirements: Previous experience in aviation focused electrical design ONC/HND, or equivalent qualification in Electrical or Aerospace Engineering. Must have experience and a good proficiency in SolidWorks Electrical Experience working with PDM systems would be an advantage Experience in resolving emergent electrical issues and developing innovative solutions

Job Title: Principal Product Safety Engineer Location: Frimley, Weymouth, Bristol, Portsmouth, Barrow-in-Furness, Devonport, Plymouth or Brough, Hybrid We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering advanced, technology-led defence, aerospace, and security solutions, shaping a safer future for all. From the depths of the ocean to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you’ll provide expert advice on product safety matters to project and engineering managers, ensuring safety considerations (DEF STAN 0055/0056) are correctly implemented. You’ll engage with third parties to review and gather supporting safety case evidence, develop safety arguments (both physical and functional) using methods such as FHA, STPA, FMEA, FTA, and produce or update safety case and safety management documentation in line with regulations and standards. Core duties: Provide advice on product safety matters to support programme delivery Engage with external stakeholders to gather and review safety evidence Develop and maintain safety arguments and documentation using recognised safety methods and standards Line manage and support the development of other safety practitioners Apply ALARP principles to assess and mitigate safety risks Demonstrate understanding of safety engineering and assurance principles Essential Skills: Degree qualified in a STEM discipline or equivalent experience Safety engineering processes, practices and tools Clear understanding of safety engineering & assurance principals The Combat Systems Safety Team: Working closely with engineers and technical specialists on both In-Service and In-Build Combat Systems, you’ll have the opportunity to develop safety arguments and gain knowledge of new technologies and sensor systems used to support them. Experience in the military, defence, or maritime industries is welcomed. Relocation support is available for eligible roles across Submarines. A place where everyone can thrive: We’re committed to an inclusive workplace that values diversity of thought and integrity. We welcome applications from all suitably qualified candidates, including those with disabilities or health conditions, and encourage discussion with recruiters regarding reasonable adjustments. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet, at minimum, the Baseline Personnel Security Standard, and some roles require higher levels of National Security Vetting with 5–10 years continuous UK residency depending on the vetting level. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and an inclusive, supportive culture enable you to reach your potential. You’ll enjoy rewards tailored to what’s most important to you, including pension schemes, employee share plans, health and wellbeing benefits, and a balanced lifestyle. Closing Date: 16th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-KP1 #LI-Hybrid

We are seeking a skilled Automation Engineer to support and enhance the automation systems within a high-speed manufacturing facility. The successful candidate will be responsible for maintaining, modifying, and improving Siemens PLC programs using Siemens TIA Portal, ensuring production equipment operates safely, reliably, and efficiently. This role is ideal for someone who enjoys troubleshooting complex automation systems and delivering continuous improvements within a fast-paced production environment. Key Responsibilities: • Maintain, troubleshoot, and modify Siemens PLC programs using TIA Portal across production machinery and automated systems., • Diagnose and resolve automation, control, and communication faults to minimise production downtime., • Support upgrades, improvements, and optimisation of existing automation systems., • Implement software changes, edits, and version control within PLC and HMI systems., • Work closely with maintenance, engineering, and production teams to resolve technical issues., • Produce and maintain clear technical documentation for PLC programs and system changes. Requirements: • Experience working with Siemens PLCs (S7 series) and TIA Portal in a manufacturing or industrial environment., • Strong troubleshooting and fault-finding skills in PLC-controlled machinery., • Knowledge of industrial networks and communications (e.g., Profinet, Profibus, Ethernet/IP or similar)., • Experience with HMI/SCADA systems within TIA Portal., • Understanding of electrical control systems and automation hardware

Design & Project Engineer-Perm-Camberley-£45-£50k A leading engineering organisation is seeking a skilled and motivated Design & Project Engineer to join their growing team. This is a great opportunity to work in a fast-paced environment, delivering projects across specialised industrial sectors. Key responsibilities of the Design & Project Engineer - • Produce detailed engineering designs, drawings, and specifications for pipework, pump systems, and associated equipment., • Work collaboratively with senior engineers and internal teams to deliver high-quality solutions., • Manage projects from initial enquiry through design, procurement, installation, and commissioning., • Liaise with clients, suppliers, and internal teams to ensure project requirements and timelines are met., • Prepare technical documentation, including calculations, reports, and project plans., • Support cost estimation, budgeting, and procurement of materials and equipment., • Conduct site visits to oversee installation, troubleshoot issues, and ensure compliance with design intent., • Ensure all work meets relevant industry standards, quality expectations, and health & safety requirements. Requirements of the Design & Project Engineer - • Proven experience in a design/project engineering role within fluid handling, water, or process industries., • Strong knowledge of pumps, pipework systems, and mechanical equipment., • Proficiency in CAD software, ideally Inventor., • Experience using Autodesk Vault for document control and revision management., • Ability to produce and interpret P&IDs, GA drawings, and fabrication details., • Understanding of materials, stress considerations, and system layouts within process environments., • Good grasp of project delivery, cost control, and scheduling., • Strong communication and stakeholder management skills., • Organised, self-motivated, and capable of managing multiple projects. Benefits to the Design & Project Engineer - • Competitive salary and benefits package, • Career progression and professional development opportunities, • Diverse and technically engaging projects, • Supportive and collaborative working environment Please get in touch if this role sounds like a good match to your skillset

M365 and Entra Technical Architect Frimley or Preston Based (Mainly remote) £1000 per day Umbrella Inside IR35 12 Month Contract initially. This is a great opportunity to work within one of the UK's leading Defence organisations based In Frimley or Preston. Mainly remote with 1-2 days per month on site. The Azure Engineer is responsible for building, operating, and optimising cloud infrastructure and platform services within Microsoft Azure. This role provides hands‑on engineering, operational support, and continuous improvement of Azure services to ensure secure, scalable, and resilient cloud delivery. The engineer works closely with architects, security teams, and application owners to implement solutions that follow best practice, automation standards, and governance controls. Knowledge Deep understanding of Microsoft 365 architecture including Exchange Online, SharePoint Online, Teams, OneDrive, and Purview. Expert knowledge of Entra ID concepts including Conditional Access, MFA, PIM, identity lifecycle, hybrid identity, and identity protection. Strong working knowledge of Zero Trust, modern security models, and Microsoft Security stack integrations. Understanding of endpoint management frameworks including Intune, compliance policy design, Autopilot, and device governance. Familiarity with modern authentication protocols including OAuth 2.0, OIDC, SAML, SCIM, and certificate‑based authentication. Knowledge of compliance frameworks and data governance within Microsoft 365 (DLP, retention, eDiscovery). Understanding of Microsoft Graph, automation tooling, and API‑based platform integrations. Solid awareness of enterprise networking concepts and their interactions with cloud services. Knowledge of service management frameworks (e.g., ITIL) and operational governance models. Awareness of cloud cost management, licensing optimisation, and platform lifecycle planning.. Skills Ability to design secure, scalable, and resilient enterprise architectures across M365 and Entra ID. Strong analytical and problem‑solving skills with ability to resolve complex identity and collaboration challenges. Excellent documentation skills, including HLDs, LLDs, architectural diagrams, and technical standards. Strong stakeholder management and the ability to explain technical concepts to non‑technical audiences. Hands‑on skills with PowerShell, Microsoft Graph, and automation tooling. Ability to lead workshops, design sessions, and technical governance forums. Skilled in architectural reviews, solution assurance, and quality control processes. Ability to work across teams including security, networking, service management, and engineering. Strong change management and adoption‑driven mindset. Capable of mentoring engineers and contributing to team capability maturity.. Qualifications Microsoft Certified: Cybersecurity Architect Expert, Identity and Access Administrator, or related certifications. Microsoft 365 Certified: Enterprise Administrator Expert or equivalent experience. Relevant certifications in security frameworks (e.g., CISSP, CCSP) are desirable. Formal architecture qualifications (e.g., TOGAF, SABSA) beneficial but not mandatory. Proven experience delivering large‑scale M365 or Entra transformations. Background in enterprise IT, cloud architecture, or related disciplines. Strong grounding in ITIL or similar IT service management frameworks. Experience working in large, complex enterprise or regulated environments. Evidence of ongoing professional development in cloud and security technologies. Bachelor's degree in Computer Science, Information Systems, or equivalent practical experience (preferred but notFor more information please contact Lauren Morley at JAM Recruitment or click apply

I am looking for an Electrical Design Engineer to join my fantastic aerospace client based in Farnborough on a 6-month contract. As an Electrical Design Engineer, you will contribute to the design, development, and delivery of electrical products across multiple Zephyr programme. You will help generate and maintain the digital design record, collaborating closely with both internal teams and external manufacturing and installation partners. Role: Electrical Design Engineer Pay £27.82 per hour via umbrella Contract: 37 Hours a week, Inside IR35 Location: Farnborough Security Clearance: BPSS Main activities of role: - Support Avionics and Systems Engineering teams in developing and maintaining the production design record for new concepts and design changes. Produce detailed electrical design solutions using SolidWorks Electrical. Select appropriate electrical components to satisfy schematic and system level requirements. Act as a key contact for electrical design queries across engineering and production. Provide hands on support to the build line in resolving emerging electrical issues. Support and participate in design maturity gate reviews in accordance with AALTO's design processes. Help manage design changes in line with configuration and change control processes. Collaborate with Production and Procurement teams to ensure Design for Manufacture (DFM) considerations are addressed early in the lifecycle.Required experience: Previous experience in aviation focused electrical design ONC/HND, or equivalent qualification in Electrical or Aerospace Engineering. Must have experience and a good proficiency in SolidWorks Electrical Experience working with PDM systems would be an advantage Experience in resolving emergent electrical issues and developing innovative solutions Demonstrable experience in translating system level requirements into complete design solutions If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Due to the number of applications we receive, it's not always possible to contact unsuccessful applicants. Unless you hear from us within 14 days of your application, please assume that you have been unsuccessful on this occasion. Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 35 years. We work with some of the industry's best known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Looking for a Security Engineer to peform Install/ Service and Maintenance on CCTV, Access Control, Perimeter Protection and Door Entry Systems. -Apprentice to Highly Qualified Engineers! -Overtime available! -Work primarily based in London -Company has been established for over 10 years and have a well-established working relationship with leading electronic security manufacturers

Electrical Design Engineer Location: Farnborough (Hybrid - minimum 3 days onsite per week) Contract: 6 months (likely extension) Hours: 37 per week Rate: £20.79 PAYE / £27.82 Umbrella Clearance: BPSS (completed by the Client) IR35: Inside IR35 About the Role Our client is a leading organisation at the forefront of cutting-edge aerospace innovation. They design and develop advanced, solar‑powered, high‑altitude platforms that operate in the stratosphere, enabling long-endurance flight and delivering critical services for global customers across commercial and government sectors. As an Electrical Design Engineer, you will play a vital role within a multidisciplinary engineering team, developing and delivering electrical design solutions across multiple programmes. This is an exciting opportunity to contribute to highly technical projects in a rapidly growing environment, collaborating closely with engineering, production, and external partners. Key Responsibilities Produce detailed electrical design solutions using SolidWorks Electrical. Develop and maintain production design records for new concepts and design changes. Select appropriate electrical components to meet schematic and system-level requirements. Act as a key point of contact for electrical design queries across engineering and production. Provide hands-on support to the build line to resolve emerging electrical issues. Support design maturity gate reviews in line with engineering processes. Manage design changes through established configuration and change-control processes. Work closely with Production and Procurement to ensure Design for Manufacture (DFM) considerations are captured early. Required Experience & Skills Proven experience in aviation-focused electrical design. Strong proficiency in SolidWorks Electrical (essential). Experience with PDM systems (advantageous). Demonstrable ability to translate system-level requirements into complete design solutions. Experience resolving emergent electrical issues and developing practical solutions. ONC/HND or equivalent in Electrical Engineering, Aerospace Engineering, or similar (experience valued over formal qualifications). If you think this could be a new and exciting career opportunity for you and you would like to learn more or just for an initial, no-obligation conversation please contact me on (phone number removed) or you can apply directly by following the Easy Apply link and I will contact you as soon as I receive your contact details. This vacancy is being advertised by Belcan

An exciting opportunity for a Control Systems Engineer to join a pioneering engineering team developing advanced electric vehicle technologies. Degree in Control Systems, Electrical Engineering, Automotive Engineering, Mechatronics or similar. Control Systems Engineer - EV / Automotive - Oxfordshire

Our most successful hires have come from a range of backgrounds including chemical engineering, process engineering, and mechanical engineering. Degree in Mechanical Engineering, Chemical Engineering, Process Engineering, or closely related discipline. We design ventilation, LEV, specialist HVAC, an

JOB TITLE: Junior Control Systems Engineer. We’re looking for a Junior Control Systems Engineer to join a growing automation team in the Merseyside area. Any PLC programming or control systems experience.

We are seeking a Senior Control Systems Engineer to lead the development of advanced control systems within an innovative engineering environment focused on high-performance electrified vehicles. Degree in Control Systems, Electrical Engineering, Automotive Engineering, Mechatronics or similar. Expe

Controls Systems Intergration Engineer- designs, develops, and maintains systems that automate industrial processes, ensuring optimal performance and safety. As a Controls Systems Intergration Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled