Engineering jobs in EwellCrear alertasSin experiencia

Field Service Engineer Salary up to £27,248 dependent on experience Wheelchair Service Centre, Chessington, KT9 1HF – Full UK driving licence Essential Full time hours Job purpose: The field Service Engineer will enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchair equipment to gain essential product knowledge. On completion of initial training this will enable you to work both out in the field and in the workshop delivering, collecting, repairing, and servicing wheelchairs. The expectation is that once fully trained most jobs will be completed on a first-time fix basis. The Areas this Field Service Engineer role is covering is the Chessington Area. Key Responsibilities: • Delivering and collecting wheelchairs to and from service user’s homes and NHS departments, always ensuring that the Company Infection Control Policy is followed., • Servicing and repairing wheelchairs in the field with the aim of achieving a first time fix whenever possible., • Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base., • Ensure any PPE supplied for use in carrying out your duties is used as instructed., • Once fully trained undertake out of hours responsibility when rostered., • Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act., • Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day., • ensure the vehicle safety check and the van check sheet are done each week, • Maintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is always kept clean and laundered., • Prioritise and organise your workload, referring to Line Manager as and when appropriate, • Be responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook., • Agree to undertake all training offered that is necessary to maintain the skills required for this role., • Maintaining a clean and tidy workshop and working in a way to ensure all Company Health and Safety procedures are adhered to., • Repair and service equipment to the agreed standard., • P.D.I. chairs for delivery by M.S.E., • Full UK driving licence, • Successful enhanced DBS check, • General workshop knowledge, • Basic electrical knowledge including 12v/24v D.C. systems, • Able to move and handle loads and equipment safely, • Experience of face-to-face customer contact., • Previous delivery driver experience, • An awareness and understanding of people with disabilities, • Flexible approach to working conditions and working environment change., • Ability to use own initiative within set boundaries of the role., • Ability to use a mobile phone to relay photographs, • Good written and verbal communication skills., • Ability to relay clear instructions to clients., • Moving and handling of equipment and accessories following handling guidelines, • Standing at a bench to work, • Kneeling/crouching, • working in confined workspace if the job necessitates (installing equipment in small toilet areas or bathrooms), • Flexible working/responsive to changing priorities as set by Line Manager or Customer Service team, • Committing to being available for short notice overtime necessitated by emergency response requirements Interested in this Field Service Engineer role in Chessington? Apply now with your updated CV. Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.

Job Title: Principal Systems Engineer Location: Frimley. We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role Salary: Negotiable dependant on experience What you’ll be doing: • Provide oversight and technical ownership of CCS design, leading design decisions and supporting the Engineering Manager in delivering in-service programmes, • Ensure technical leadership by controlling project scope, managing design changes, and engaging stakeholders and suppliers to identify risks early, • Lead programme-level design reviews, coordinate stakeholders, manage design baselines and voids, and produce Certificates of Design while ensuring design governance, • Review and influence technical requirements and architectural design to ensure system integration, covering sub-systems and specialist domains for subcontractor design, development, and qualification Essential: • Extensive experience in network or software engineering, ideally with a background in operations, • Ability to take the lead on technical matters and provide expert guidance, • Chartered Engineer status or working towards, • Specialist expertise in Combat Systems, particularly in relation to submarines, would be advantageous, • Familiarity with DOORS and prior hands-on experience using it As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive. The team: You will be joining the In-Service Programme team, working on the V Class, where you’ll thrive in a fast-paced environment, delivering high-quality results within tight enterprise timelines. As part of a medium-sized core team of 6-12, you’ll also collaborate with a wider group of around 30, engaging with a broad stakeholder network. This role demands strong technical leadership, owning challenges, proactively solving problems, and working with the right stakeholders to drive solutions forward. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 24th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-SC1 #LI-Hybrid

Technical Staffing Resources (TSR) are the in-house agency and master vendor for KBR who are aleading global engineering, construction, and services company. KBR support the hydrocarbon and government services markets on six continents. Serving their customers through diverse business units, KBR offer challenging assignments on some of the world's largest and most complex projects. We are seeking an... ZIPC1_UKTJ

Multiskilled Maintenance Technician - Electrical Bias Location: Kingston / Surbiton (Kingston University Student Living Sites) Full-time | Temp to Perm | EQUANS are looking for an experienced, electrically-qualified Multiskilled Maintenance & Service Technician to join the on-site team supporting Kingston University's student accommodation portfolio. This is a hands-on, customer-facing role where yo... ZIPC1_UKTJ

Principal or Associate Level Structural Engineer £65k-£75k Near Kingston KT1 A Principal or Associate level Structural Engineer is required by this medium sized international structural engineering consultancy. They have offices in several locations through the UK and abroad. They work on a wide variety of buildings projects, often large mixed use multi storey urban developments. They pride themsel... ZIPC1_UKTJ

Service Engineer - Water Hygiene / Water Treatment Location: London & South of England Salary: £35,000 - £40,000 (depending on experience) Job Type: Full-time, Permanent Employer: Employee-Owned Company About the Company We are proud to be working in partnership with an employee-owned business that has been a trusted name in the water treatment and water hygiene industry for over 30 years. With a strong... ZIPC1_UKTJ

Field Engineer - Verification: Weighing Scales, Scanners, PEDs, PCs South London £27,300 Starting basic rising to £28,250 after probation + overtime + van + benefits package + full training On-Site working hours flexible between 8am and 6pm, Occasional Weekends & Bank Holidays This is a superb opportunity for an experienced Field Engineer looking for a supportive and interesting working environment an... ZIPC1_UKTJ

Have you worked as an electrical technician or engineer in a commercial environment? Perhaps installing or servicing coffee machines, vending machines, fridges / freezers, arcade games, or similar kit? Then stop scrolling and read on - if you're looking for a new job, this could be it! This company have been brewing quality coffee for over 100 years! They are growing their team and now hiring for te... ZIPC1_UKTJ

Astute's Renewables Team is with a working with a well-established energy from waste business who are fully committed to contributing to a more sustainable world. They are looking to recruit an experienced Multiskilled Engineer (Electrical Bias) for their renewable energy plant in South London The Multiskilled Engineer will play an important part in helping to ensure the plant continues to perform ... ZIPC1_UKTJ

Service Engineer (Air Conditioning) £40,000 - £42,000 + Overtime OTE 50k + Van + Healthcare + Funded Security Clearance Sutton Are you a Service Engineer from an air conditioning background, looking to cover a local patch for a renowned company, offering fully funded security clearance, ample training and overtime to increase your earning potential? In this role, you will be covering a local area w... ZIPC1_UKTJ

About The Role: HomeServe are now recruiting for directly employed Plumbing Engineers to join our team! • Location - Kingston upon Thames, • Full Time - 40 hours per week. This includes some weekend, evening and bank holiday work, • Salary - £38,800 - £42,950 (salary dependent upon experience). Plus a £3000 guaranteed bonus in your first yearHomeServe offers an industry leading reward package to attract the ... ZIPC1_UKTJ

Pump Engineer (M25 Patch) £50,000-£60,000 + OTE 75K + Door to Door Pay + Callout Bonus + Overtime Sutton Are you a Pump Engineer or similar, looking to join a major independent supplier of high-end brands, covering an M25 patch, working on a variety of different pumps, with rapid progression to senior positions and endless overtime to significantly increase your earning potential? In this role you wil... ZIPC1_UKTJ

Mechanical Service Engineer (Building Services) £40,000 - £42,000 + Overtime OTE 50k + Van + Healthcare + Funded Security Clearance Sutton Are you a Mechanical Service Engineer from a Building Services background looking to cover a local patch for a renowned company, offering fully funded security clearance, ample training and overtime to increase your earning potential? In this role, you will be c... ZIPC1_UKTJ

Field Service Engineer Salary up to £27,248 dependent on experience Wheelchair Service Centre, Chessington, KT9 1HF Full UK driving licence Essential Full time hours Job purpose: The field Service Engineer will enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchair equipment to gain essential product kn... ZIPC1_UKTJ

Field Service Engineer Salary up to £27,248 dependent on experience Wheelchair Service Centre, Chessington, KT9 1HF – Full UK driving licence Essential Full time hours Job purpose: The field Service Engineer will enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchair equipment to gain essential product knowledge. On completion of initial training this will enable you to work both out in the field and in the workshop delivering, collecting, repairing, and servicing wheelchairs. The expectation is that once fully trained most jobs will be completed on a first-time fix basis. The Areas this Field Service Engineer role is covering is the Chessington Area. Key Responsibilities: • Delivering and collecting wheelchairs to and from service user’s homes and NHS departments, always ensuring that the Company Infection Control Policy is followed., • Servicing and repairing wheelchairs in the field with the aim of achieving a first time fix whenever possible., • Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base., • Ensure any PPE supplied for use in carrying out your duties is used as instructed., • Once fully trained undertake out of hours responsibility when rostered., • Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act., • Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day., • ensure the vehicle safety check and the van check sheet are done each week, • Maintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is always kept clean and laundered., • Prioritise and organise your workload, referring to Line Manager as and when appropriate, • Be responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook., • Agree to undertake all training offered that is necessary to maintain the skills required for this role., • Maintaining a clean and tidy workshop and working in a way to ensure all Company Health and Safety procedures are adhered to., • Repair and service equipment to the agreed standard., • P.D.I. chairs for delivery by M.S.E., • Full UK driving licence, • Successful enhanced DBS check, • General workshop knowledge, • Basic electrical knowledge including 12v/24v D.C. systems, • Able to move and handle loads and equipment safely, • Experience of face-to-face customer contact., • Previous delivery driver experience, • An awareness and understanding of people with disabilities, • Flexible approach to working conditions and working environment change., • Ability to use own initiative within set boundaries of the role., • Ability to use a mobile phone to relay photographs, • Good written and verbal communication skills., • Ability to relay clear instructions to clients., • Moving and handling of equipment and accessories following handling guidelines, • Standing at a bench to work, • Kneeling/crouching, • working in confined workspace if the job necessitates (installing equipment in small toilet areas or bathrooms), • Flexible working/responsive to changing priorities as set by Line Manager or Customer Service team, • Committing to being available for short notice overtime necessitated by emergency response requirements Interested in this Field Service Engineer role in Chessington? Apply now with your updated CV. INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.

JOB TITLE: Commercial Gas Engineer LOCATION: Surrey and London SALARY: £45K - £55k (dependent on qualifications and experience) van, fuelcard, overtime, CONTACT: Kerry Hayes - JOB INFORMATION - Commercial Gas Engineer • Based from home and working on a mobile basis you would be responsible for carrying out maintenance and repair on a wide range of commercial gas systems., • You would be responsible for carr... ZIPC1_UKTJ

Job Title: Dual Fuel Engineer Locations:Suttonand surrounding areas At Orion Smart Metering, were proud to work with some of the UKs biggest energy suppliers including two of the Big Five as well as the UKs #1 metering provider. Were now expanding our team and are looking for experienced Dual Fuel Engineers to install meters in domestic properties as part of our growing national contracts. --------... ZIPC1_UKTJ

Service & Breakdown Engineer (Domestic Gas) Location: SouthLondon Employment Type:PAYE Full Time Salary:£40,000 £45,000 per annum + enhanced OOH & ECO rates Additional Earnings:Monthly KPI Bonus (based on 1st Time Fix) Package & Benefits * Guaranteed contracted hours * Pension Scheme (Salary Sacrifice) * Company van & fuel card * Postcode-based scheduling (reduced travel time) * Qualification renewals included * Free ... ZIPC1_UKTJ

Engineer / Mechanic HOURS: Full time (Flexible, incl. evenings and weekends). LOCATION: Daytona Sandown Park, More lane, KT10 8AN. Salary: Competitive. Daytona Tamworth is recruiting for a Engineer / Mechanic Key Responsibilities: • To work as part of the engineering team to assist in all matters relating to technical and safety aspects of the Daytona Venues engineering facility., • To work with the team t... ZIPC1_UKTJ

Building Services Engineer Location: Kingston, KT1 2EE Salary: £36,000 - £40,000 per annum, DOE + Excellent Benefits! Contract: Full time, Permanent Hours: Monday - Friday 8am - 4.30pm 37 hours per week KUSCO (Kingston University Service Company Ltd) is a wholly owned subsidiary company of Kingston University, established in December 1997. It is a non-profit making organisation providing facility manag... ZIPC1_UKTJ

The company has been running since 2003 providing Technical M&E service support to the Commercial Building Maintenance sector. We run a small team of highly skilled mobile air conditioning engineers covering London, Greater London and South of England. Skills and experience:Min Level 2 F Gas Min 5 years Exp Must be able to work as part of a small team as well as work alone Essential to have excellent c... ZIPC1_UKTJ

Well give you £10,000 to make the jump! Yes, you read that right. Were serious about achieving our ambition of making the UK NetZero by 2050. We know that to get there, we need to hire the best and to make that happen were offering a £10,000 sign-on bonus. We need Service & Repair engineers to join our team of experienced Gas Engineers, to ensure that our customers get the help they need, when they... ZIPC1_UKTJ

About The Role HomeServe are now recruiting for directly employed Gas Repair Engineers to join our team! • Location - Kingston upon Thames, • Full Time -You will average 40 hours per week over the year working annualised hours (less in summer more in winter) but your pay will not change! This includes some weekend, evening and bank holiday work, • Salary -£51,400. Plus a £3000 guaranteed bonus in your first ... ZIPC1_UKTJ

Gas Service Engineer (Building Services) £45,000 - £50,000 + Overtime OTE 57k + Van + Healthcare + Funded Security Clearance Sutton Are you a qualified Gas Engineer, looking to cover a local patch for a renowned company, offering fully funded security clearance, ample training and overtime to increase your earning potential? In this role, you will be covering a local area within a 1-hour radius of ... ZIPC1_UKTJ

FPGA Design Engineer Audio A leading audio company is on the lookout for a FPGA Design Engineer to join their collaborative and cross-functional engineering team. This is your chance to be part of a team shaping next-generation audio systems & solutions used in high-performance electro-mechanical products. Your Key Responsibilities: • Take projects from concept through to implementation, • Architect and i... ZIPC1_UKTJ

PRINCIPAL ELECTRICAL ENGINEER Location: Leatherhead, UK Contract duration: initial 12-month contract - renewable Start Date: ASAP Project: LNG We are seeking an experienced Principal Electrical Engineer for a long-term contract role. The position requires full-time office attendance and offers an opportunity to work on LNG FEED projects. The role is a contract position with an initial 12-month period with the possibility for renewal, the contract is inside IR35 on a PAYE basis. Key Responsibilities: • Design electrical systems for voltages up to 132kV, including overhead lines and reactive power compensation., • Develop designs for electrical distribution systems, grid interfacing, protection requirements, and brownfield modifications., • Work on conceptual, pre-FEED, study, or FEED phases for gas processing or LNG projects. Requirements: • Minimum 12 years’ experience in engineering consultancy, machinery manufacturing, or end-user environments., • Strong background in gas processing or LNG projects., • Knowledge of relevant standards and grid code requirements. The next step We have an exceptional team in place, and we are pleased to be able to appoint a further person to our growing business. We are aware that you may not ‘tick all the boxes’, but if you believe you can genuinely offer some valuable skills and experience to our business, please in the first instance contact our recruitment partner Airswift.

Mechanical Engineer: Technical Project Management Entry Level - Permanent, £27,000, Location: Onsite (Kingston Upon Thames), London. This is an opportunity to join a growing team within a consultancy. The client specializes in reducing engineering risk through detailed product design and engineering skill sets during new product development. The firm handles a broad spectrum of projects, including medical devices, automotive accessories, retail products, agriculture, and rail industry developments. Clients range from startups to multinationals, offering a fast-paced, dynamic, and rewarding work environment. The client’s facilities include a design office with access to an engineering & model-making workshop, and testing equipment for tensile testing, high-speed photography, and environmental testing. The company prioritizes providing the latest technology to its team to lead in new product development. Roles and Responsibilities: We are seeking a highly organized Design Engineer with a flair for project logistics and exceptional communication skills. Core skills required: Design Engineering: Experience in early-stage concept development, prototyping, and testing/validation. Understanding of taking a prototype to manufacture. Proficiency in Solidworks and/or Fusion 360. Knowledge of engineering drawings and Bill of Materials. Project Logistics & Operations: Highly organized, capable of managing key project areas. Articulate (verbally and written). Ability to manage sub-areas of projects, source and communicate with suppliers, track costs and lead times, update teams and clients, and identify/mitigate risks. Required Experience: *Mechanical Engineering / Design Engineering degree (or equivalent). • 9-12 months of industrial placement experience., • Solidworks experience is essential; Fusion 360 is preferred., • Demonstrated practical aptitude (e.g., hands-on skills in an engineering workshop, student projects, personal hobbies)., • Competent in creating spreadsheets, word-processed documents, and presentations. Preferred Experience: • Masters Degree in a relevant field., • Familiarity with G-suite., • Basic electronics and programming knowledge. General Technical Skills: As part of a small team, generalist skills are essential for contributing across all business areas, including 3D printing setup, prototype assembly, testing, and report writing. All activities must be conducted safely, maintaining a clean and tidy workshop, and returning tools to storage. Experience with manual machine tools (bench sanders, bandsaw, pillar drills) is beneficial. General Responsibilities: Professional and courteous interaction with staff, customers, and suppliers. Leading by example. Direct communication and work with the client’s customers. Accurate time tracking (Toggl), activity management (Asana), adherence to scope and allocated time, meeting deadlines and budgets, and proactive communication regarding potential delays. Proper storage of company documentation and diligent record-keeping in logbooks. Maintaining cleanliness and hygiene of company premises. Business & Commercial: Support business targets, contribute ideas for operational improvement, maintain and improve processes, and identify areas for enhanced business capabilities and training. Design Office: Stay updated with Solidworks/Fusion 360 CAD software advancements. Maintain supplier contact database. Consider environmental impact in designs. Personal Attributes: Motivated, self-starter, proactive in time/resource management. Ambitious, passionate about technical problem-solving. Adaptable to project scope changes. Capable of teamwork and independent work. Benefits & Details: Competitive salary. Opportunity to work on cutting-edge new product development, develop technical and design skills across diverse projects, and experience the full product lifecycle from initial design to manufacture. Flexible 8-hour workday (core hours 10:00-16:00). Fully equipped design office and laboratory for practical skill development. Close collaboration with a supportive small team. Access to Employee Assistance Programme and employee discounts. Unique insight into all business areas, from client interaction to internal system development. Training on internal systems (including Health and Safety). Valued team member with skill development opportunities. Conveniently located near public transport and Kingston town centre.

Technical Staffing Resources (TSR) are the in-house agency and master vendor for KBR who are a leading global engineering, construction, and services company. KBR support the hydrocarbon and government services markets on six continents. Serving their customers through diverse business units, KBR offer challenging assignments on some of the world's largest and most complex projects. We are seeking an Power System Studies Engineer for a 12 month assignment, based in Leatherhead, Surrey On Offer • Competitive hourly pay rate, • Outside IR35 work engagement, • Working 4 days in the office, 1 day from home NB. We can only consider candidates with the right to live and work in the UK Purpose OF The Role We are looking for a Power systems studies engineer to support an onshore project Skills / Experience • To include captive power generation, with or without grid connection, • Studies will include equipment sizing, load flow, short circuit, dynamic motor starting, harmonic studies, arc flash & transient stability, • Tasks will include running power system studies and overseeing third party vendors, • Provide power system studies for projects including EMT software., • Intermediate know-how using ETAP software If the above opportunity describes you, then I would love to speak with you, get in touch 01372 862020 / .

Operations Engineer – Wastewater As part of the operations team this role will ensure that operational, maintenance and construction methods are undertaken that allows ESPUG to adopt, operate and maintain Wastewater networks in a safe, compliant and efficient manner. ESPUG’s success will be dependent on the continued relationships that we have with our customers, Developers, contractors and service providers for the construction, maintenance and operation of our Wastewater assets. The Operations Engineer (Wastewater) will provide essential support, ensuring the smooth day-to-day running of Wastewater and other Utility Services. This role is critical in maintaining operational efficiency, compliance, and service reliability. Role Purpose The primary objective for this role is to manage and oversee day to day activities relating to the construction, operation and maintenance of the ESPUG’s Wastewater networks, ensuring that Industry and ESPUG standards are complied with. Building close relationships with ESPUG’s portfolio of Developers and their appointed groundworkers to ensure quality of construction and service provision are of the highest standard. To be achieved through completion of company and individual competency checks and asset inspection, whilst taking the lead within the operations team to ensure that any Wastewater non-conformance reports (NCR’s) are effectively resolved. ESPW adopts assets from construction partners and developers across all regions of England and Wales. The successful candidate is likely to be home based but will require regular visits to sites that are either adopted or in-construction. Key Responsibilities The following key responsibilities apply to the role: • Act as technical expert within the operations team for ensuring wastewater assets are constructed in line with ESPUG’s specification and operational policies and procedures., • Offer technical support during the onboarding of new customers and ensuring that existing customers have required competencies and accreditations., • Ensuring that Customers and Service Providers are safe, competent, accredited and regularly audited against ESP Policy & Procedures and industry guidance., • Regularly briefing Customers on changing water industry construction requirements and ESP Policies and Procedures through demonstration of in-depth operational experience., • Engaging in regular technical and compliance discussions with Customers to support delivery of safe, compliant and efficient networks., • Undertaking inspection of assets under construction, pre and post commissioning (including any pre-construction activities as required) to ensure that safe, compliant and efficient networks are adopted by ESP., • Assist in developing ESPUG’s Wastewater asset maintenance programme and that Service Providers produce a safe, compliant and efficient service., • Provide support to customers during the construction and adoption that provide value engineering solutions of Wastewater networks that support the safe, efficient, and compliant, construction, operation and maintenance in accordance with ESP’s standards, industry standards and legislation., • Undertake interventions where required with incumbent water companies that release or resolve any delays with the associated design or construction of ESPUG assets., • Participate in the OOH standby rota across all ESPE utility sectors. Key Skills • Significant experience in the wastewater distribution sector with specific Knowledge of design, delivery, installation, operation and maintenance. Experience gained preferably within the context of a water company Developer Services role or within a Developer / Sewer construction company would be advantageous, • Knowledge of the selection and procurement of materials to be used in the construction of wastewater distribution networks, and the selection and management of contractors and construction partners., • Specific key skill requirements:, • Excellent relationship management skills across the business, with customers, consumers and service providers and be able to influence behaviours and outcomes., • Clarity, accuracy and attention to detail, • Strong organisational skills, • An innovative approach to problem solving., • An ability to adopt a wider perspective than the immediate bounds of the job description., • Good verbal and written communications skills.

MONDAY - FRIDAY 6am till 2pm You’re probably not job hunting. You’re just tired. Tired of carrying broken sites. Tired of being the one who actually cares. Tired of fixing the same faults every month because nobody ever invests. Tired of being told “just keep it running” with no parts, no planning and no support. That’s usually the moment engineers start listening. This role isn’t about jumping ship. It’s about stepping into a better setup. A site where maintenance isn’t treated like the emergency service. Where planned work actually gets planned. Where safety is more than posters on a wall. Where leadership understands that good engineering is what keeps production alive. You’ll be stepping into a working supervisor role. Still hands-on. Still technical. But finally with authority to organise work properly, lead a small team, control standards and stop the constant firefighting cycle. You’ll be dealing with real mechanical, electrical and instrumentation kit. You’ll be involved in installs, reliability improvements and fault finding that actually gets solved — not bodged. And the big one: you won’t be fighting the system here. The system is built to support you. At Watt People we work with engineers every day. We know the difference between “sounds good on paper” and “good to actually work at”. This is one of the better setups we see in the market. If you’ve done your time on rough sites and you’re ready for something more professional, more stable and more respected — this is worth a quiet conversation. No pressure. No sales pitch. Just straight facts. Message me and I’ll tell you exactly what it’s like to work there. Because you don’t just want a job. You want the right one.

As a Senior ILS Engineer within the ILS / Obsolescence team, you will support the delivery of contracted ILS requirements across key UK Defence programmes and contribute to the continued development of the Integrated Logistics Support discipline. Working within a sovereign UK defence engineering environment, you will support complex, safety-critical systems deployed in support of UK and allied defence operations. Key Responsibilities • Deliver core ILS activities, including impact of change assessments to system support solutions, • Conduct and support FMECA, LORA and Life Cycle Costing activities, • Support PHS&T, training and disposal considerations, including hazardous material and security constraints, • Produce ILS Management Plans in line with DEF STAN 00-600 and business ILS strategy, • Deliver proactive and reactive obsolescence management in accordance with BS EN-IEC-62402, • Identify spares requirements in line with MoD policy and NATO codification principles, • Support reliability and availability analysis, including ARM reporting and Reliability Block Diagrams, • Support customer maintenance policy development, UMMS schedules and RCM activities, • Contribute to bid and proposal activities, including requirements review and Basis of Estimate development, • Ensure compliance with ILS requirements and promote the value of ILS across engineering stakeholders, • Demonstrate understanding of the full engineering lifecycle, from contract delivery through in-service support What We’re Looking For • Proven experience delivering ILS within the UK Defence environment, • Engineering degree or equivalent experience, ideally supported by an HNC Level 4 qualification or above, • Strong knowledge of relevant UK Defence and international ILS standards, • Experience supporting ILS activities on maritime surface or sub-surface platforms, • Experience of ILS applied to control systems and software

PLEASE NOTE THAT THIS IS A UK-BASED POST. ONLY UK-BASED APPLICANTS WILL BE CONSIDERED. THE POSITION IS NOT OPEN FOR APPLICANTS FROM OUTSIDE THE UK. Civil/Structural Engineer Job Description Beta Design Consultants is a firm of consulting engineers developing bespoke engineering solutions to clients in the construction industry. Established in West London in June 2009, we have been providing innovative solutions to local, national and international projects. We are a member of the UK Association for Consultancy and Engineering, an ISO9001/ISO14001 UKAS Accredited firm who holds Gold Membership in Construction Line. We believe in delivering low-zero carbon solutions and are one of the first signatories to the Engineers Declaration of Climate and Biodiversity Emergency. We are looking for a Civil/Structural Engineer to join our office in South West London, Kingston. We are looking for an ambitious team-player with at least five years experience. The position would suit a highly technical engineer, with at least a Master's degree, confident in concept design and in pushing boundaries of design. The following technical skills and abilities would be treated as suitable for our workload: • Ability to design steel and concrete structures and push the design to the limit., • Ability to consider details in connections and optimize connections for fabrication and assembly., • Ability to consider rebar detailing in RC structures., • Ability to adapt skills to work on complex structures such as large span, tower structures, rehabilitation., • Experience in retrofit and strengthening., • Seismic design and the use of EC8, ASCE or IBC., • Bridge inspections and experience in proposing bridge repair solutions., • Building inspections and experience in detailing repair solutions., • Structural investigation and NDT testing., • Familiarity with SCIA/IdeaStatica., • Temporary works design. We are one of the first signatories to the Engineers Declare movement and as such have a passion for delivering very cost-efficient solutions that push the boundaries of what is possible. We provide the following services: • Design and Value Engineering of Structures for Logistics, Data Centres, Industrial Facilities and Energy projects. This may include dynamic analysis and seismic analysis, • Structural investigations and assessments that include intrusive and NDT testing of foundations, buildings and bridges., • Slope stability analysis, retaining walls design, soil-structure interaction studies and design of various types of foundations and ground solutions., • Design of RC Framed Buildings to the Eurocode., • Repair design of RC Framed Buildings. We provide bespoke repair solutions for flexural and shear strengthening, columns strengthening, frames strengthening and modification., • Bridge inspections and principal inspections, followed by repair proposals and strengthening design., • Design of Steel Structures (single storey and multi-storey) to Eurocodes and AISC including application of seismic loads, non-linear behaviour and local/global failure modes., • Design and detailing of Steel Structures., • Modification and strengthening of steel structures including plating, connections strengthening, restoring or adding bracing, reducing loading and repurposing buildings., • Bespoke foundations solutions including rafts, piled rafts, retaining walls, embedded piles, basements. Experience in geotechnical design is a plus., • Temporary works design including propping and shoring of deep excavations. Experience in similar schemes is a plus. As a result of our growth, we are looking for a civil structural engineer to join our team. You will be expected to work on design projects involving concrete and steel mainly. You will also be required to work on site investigation and evaluate design proposals. You will be provided with support to meet the project commitments. You would be expected to start to work autonomously after completing few supervised tasks. Depending on attitude and aspiration, you will be encouraged to participate in business and company development as we are constantly improving our processes. Job Summary • Analysis and design of structural components and systems for various construction projects, including but not limited to residential, commercial, and industrial buildings., • Understanding and preparation of detailed design reports., • Design of roads and strong understanding of the construction regulations, codes and standards., • Conducting site visits and inspections to monitor construction progress, assess structural conditions, resolve any technical issues that may arise., • Conducting building surveys and investigations and preparing investigation reports., • Conducting bridge inspections and preparing inspection reports., • Performing calculations, simulations and analysis to ensure structural integrity and compliance with safety standards., • Structural assessment of existing buildings., • Design and understanding of drainage systems and their construction methods., • Earthworks, cut and fill and retaining walls design and specifications., • Managing and running structural design projects with autonomy (building repairs, residential developments, civil engineering designs for foundations and retaining walls)., • Liaising with contractors, clients and architects., • Representing the company at design team and contractor/client meetings and business., • Development/networking events as may be required., • Communicating clearly with team members, manager and contractors, architects, clients. Required Attributes • Educated to degree level or equivalent in structural or civil engineering. A UK MEng/MSc is a minimum requirement. A European degree would have to be four years as a minimum., • Minimum five years design experience with exposure to British Standards, European Codes or American Codes., • Good organisational and interpersonal skills, • Good technical writing and presentation skills, • Effective analytical and problem-solving skills, • We have a track record of successful completion of residential, commercial and industrial projects to client's satisfaction., • We specialize in bespoke solutions for steel structures (single storey, multi storey, façade supports, residential refurbishment)., • We have a track record in completing the repair and refurbishment of RC framed buildings. We use traditional strengthening, jacketing, composite repairs (fibre reinforced polymers) or high-performance concrete., • We have a loyal client base who use our steel connections design service and steel detaining service., • Our current design team of 5 people would support the growth of the new team member and offer flexibility and recognition opportunities. Job Type: Full-time, Permanent We provide a safe working environment based on government guidelines. We do not support working from home. We work from a small office in a very professional setting. Job Types: Full-time, Permanent Additional pay: • Bonus scheme, • Performance bonus, • Casual dress, • Company pension, • Flexible schedule, • Gym membership, • 8-hour shift We provide a safe working environment based on government guidelines. We do not support working from home. We work from a small office in a very professional setting. Education: • No

Principal ILS & Obsolescence Engineer Location: New Malden (Hybrid: 1-2 days on-site, remainder remote) Duration: 2-3 months with potential extension (client currently looking to see if they can of initial longer contract) Rate: Market rates Our client, a leading organisation in UK Defence, is seeking a dedicated Principal ILS & Obsolescence Engineer to join their team supporting prestigious maritime programmes. This is an exciting opportunity to contribute to projects that shape the future of defence technology. What you'll be doing: • Lead the ILS process across various programmes, ensuring seamless integration and delivery, • Provide expert ILS guidance to engineering teams, supporting complex product development, • Develop and maintain strong relationships with customers and stakeholders, • Oversee ILS activities throughout the product lifecycle, ensuring compliance and quality, • Manage technical aspects of supplier relationships, ensuring standards are met What you'll bring: • Extensive experience in ILS & Obsolescence Engineering methods and techniques, • Degree qualification or equivalent in a relevant engineering discipline, • Excellent communication and interpersonal skills, with the ability to influence stakeholders, • Proven experience in managing customer and supplier relationships, • Leadership skills with a talent for team management and mentoring This role offers a unique chance to work on impactful projects within a collaborative environment. If you’re passionate about defence engineering and ready to make a difference, we’d love to hear from you. Apply now to join a forward-thinking organisation committed to innovation and excellence.

Structural Façade Engineer Senior: £50,000 – £60,000 | Associate - £70,000 – £90,000 Epsom- hybrid working Fast track to directorship Are you ready to be a decision maker with a seat at the table? Are you ready to take full ownership of façade structural engineering schemes from concept to final delivery? Do you have previous experience integrating structural design with broader façade performance and compliance requirements? If you are an experienced Associate or Senior Associate Engineer looking to advance your career, this is your next role! We are seeking a commercially focused Structural Façade Engineer to take immediate ownership of a structural business stream in either London or Surrey. This role is designed for a leader who is ready to drive a specialist department with genuine autonomy and a clear path to the highest levels of the business. The successful Structural Façade Engineer will: • Lead and project manage high end façade structural engineering schemes from concept to final delivery;, • Act as the technical authority, performing complex structural analysis and reviewing third party calculations;, • Develop the business stream by identifying new opportunities and representing the firm at senior level design and client meetings;, • Create and standardise engineering tools, including automated spreadsheets and TEDDS templates, for wider team use;, • Oversee site installations and resolve critical technical challenges on site with architects and contractors;, • Integrate structural design with broader façade performance requirements, ensuring full compliance and technical excellence;, • Manage project priorities independently, driving growth with minimal supervision. We are looking for a Structural Façade Engineer with: • Chartership or near chartership through the ICE or IStructE;, • Extensive technical experience in façade and cladding structural engineering;, • A commercially aware mindset, proactive, and ready to develop a business stream;, • Deep knowledge of façade materials, manufacturing processes, and modern construction methods;, • The ability to work independently while harmoniously collaborating with a multi-disciplinary team;, • Proven experience in a client facing role, capable of chairing meetings and managing external relationships. The Package • A highly competitive salary (up to £90,000);, • Annual profit share scheme;, • Bupa mental health support;, • 22 days annual leave plus up to 10 days upaid leave per year;, • Pension - 6% employer, 5% employee;, • A flat management structure that removes the barriers to promotion found in larger firms;, • Genuine autonomy to shape the structural engineering division and its future strategy;, • Flexible and hybrid working arrangements;, • Direct involvement in business development and high level decision making. If you would like to hear more about this incredible opportunity, apply today and One Generation Recruitment Limited will be in touch shortly!

Job Title: Assistant Engineering Manager \n Location: New Malden, Broad Oak (We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role) \n Salary: Circa £50,000 (dependent on skills and experience) \n What you’ll be doing: \n\n • Supporting the Technical Authority and Engineering Manager in the management of Project Engineering activities, including providing help and direction on the overall project delivery;\n, • Managing the planning of Engineering tasks, both within the Project and feeding into the Product level planning;\n, • Identifying, assessing and managing risks to the success of the project;\n, • Supporting interactions with the Project Technical Council and complex stakeholder network;\n, • Experience in systems or software engineering delivery with strong knowledge of Engineering governance processes\n, • The ability to manage complex technical issues and make engineering judgements with support from subject matter experts\n, • Good problem-solving skills for routine or moderate complexity situations\n #LI-NS1 \n #LI-Hybrid \n \n

Junior AI Developer Programme Job Support Included Complete online training designed to help you enter junior AI and developer roles. Study part-time, build coding and AI fundamentals, and receive structured job support to help you secure your first role. The Programme This 1014 week online programme covers Python programming, AI fundamentals, machine learning basics, and applied development projects. Tutor support is provided throughout, alongside portfolio-building and job readiness support. The Outcome Junior AI Developer and entry-level AI roles. Starting salaries: 30,000 40,000 Who This Is For Ideal for beginners and career changers with an interest in coding and AI. UK learners only. Apply now. Limited availability.

Gas Assurance Engineer (Records) Role Context ESP owns and operates licenced utility networks that rely on accurate and contemporary records to determine the nature of each asset, their location and supporting information to document their compliant construction, commissioning and ongoing operation. We have a historic portfolio of asset records up to 25 years old as well as records associated with assets that are currently being constructed for Electric, Gas and Water. Our Electric, Gas and Water portfolio consists of: • Assets adopted from UIPs, ICPs, and SLPs, • Bulk asset acquisitions from other iGTs and iDNOs, • ‘Infill’ assets constructed on existing networks Asset types include all aspects of utility infrastructure from mains connections, services and metering and other more specialist assets such as Substations, PRIs and MOBs. The associated asset records are managed and stored on a variety of systems; ESP is currently transitioning to a common asset management system. The Gas Assurance Engineer will play a key role in the transition to this new system for ESP’s gas assets. Role Purpose You will be responsible for assuring the records submitted by our customers and service providers meet requirements, are suitably located on ESP systems and available as appropriate to internal and external stakeholders through systems or externally hosted platforms as applicable, providing related reporting to support projects to ensure the ongoing validity of transportation licences and industry accreditations. This role plays a key part in assuring the compliance of our UIP customers and service provider contractors with technical onboarding and company validation requirements. As we move to a new Asset Management System, you will also support the transition to the new system, working with colleagues and service providers to migrate existing and legacy asset records into a common format, developing processes and SOPs to support the ongoing appropriate management of the records. Key Responsibilities • Undertake the co-ordination and validation of UIP customer and service provider onboarding renewals and revalidation activities for gas., • Liaise with UIP Customers and Service Providers and provide technical support to the Completion team to ensure compliance with ESP specifications for gas records, including as-laid drawings, mains and service records and metering information., • Validate and assure geospatial records including polygon creation and their upload into internal and external systems. Ensure required records are made available to third parties e.g. Emergency Service Providers, LSBUD, Vault, NUAR in formats and using transfer methodologies required by these providers., • Provide periodic reporting on real time changes to ESP’s connections and metering portfolio, managing the process of MAM transfers and the GSR disconnections process, engaging with Customer Operations and Service Providers to ensure any physical works are delivered., • Provide asset portfolio data to support routine updates of the gas safety case, routine regulatory reporting and fulfil any ad-hoc requests from either OfGEM or the HSE., • Ensure compliance with network emergency response protocols through the maintenance of the large load consumer and priority supply point register, including pro-active engagement with consumers, • Review data submissions (both primary and secondary) for asset data recovery projects and asset acquisition initiatives, providing quality assurance on submissions and update of systems to reflect closure., • Act as lead point of contact for migration of gas asset information into the new asset management system., • Maintain KPIs to reflect Gas Assurance activities, including customer performance reporting and compliance metrics., • Provide training and support to colleagues around gas records validation, systems and record interpretation. Key Skills • Experience of working with a range of asset information for gas networks including construction records, metering information. (Essential), • Demonstrable capability and competence in the use MS Sharepoint, MS Lists and Power BI (Essential), • Competence in use of CAD and GIS Systems (Essential), • Proficiency in the use of MS Excel to analyse data, discrepancies and automate reporting and processes. (Desirable), • Awareness of industry process flows and requirements (Desirable), • Value accuracy and have strong attention to detail., • Ability to provide concise and impactful reporting on delivery of tasks and process performance.

Head of Engineering – Heat The Head of Engineering - Heat will be responsible for driving the development and delivery of strategic heat and utilities projects from pre-contract stage through to implementation to some of the most prestigious developments in the UK. You will be the ESP subject matter expert across all design matters on heat networks, directly accountable for the technical development of projects, bringing engineering rigor to the pre-sales and pre-contract stages. This includes managing the pre-contract process, developing innovative strategies and concepts, reviewing and approving consultant designs, and working closely with both ESP commercial, delivery, and operational teams as well as equivalent teams from our partners, to ensure our solutions are technically robust, commercially viable, deliverable, and ultimately contracted. You will be responsible for: • Developing energy strategies, commercial and technical business cases that meet ESP financial requirements to enable the growth of the ESP heat portfolio., • Support the ESP commercial team to present strategies to internal, external and customer stakeholders and be ESP representative in key industry forums., • Help develop ESP technical strategies and specifications to be compliant with Heat Network Technical Assurance Compliance., • Support the business change, implementation and operational teams with development of pre-contract design, engineering and delivery systems and processes, and taking a key governance role to ensure once implemented, these processes are adhered to., • Lead change readiness and handover to operational teams, ensuring processes and systems are embedded and business-as-usual readiness is achieved., • Coordinate and manage data flows for third-party service providers for network operations, metering & billing, and CRM, ensuring contractual and business performance standards are met prior to contract execution., • Deliver high-quality customer experience across all touchpoints. Key Responsibilities Strategic Development & Design Innovation • Be the SME for all heat project initiatives. Using your in-depth technical knowledge and relationships with consultant teams, technology providers and regulators you will lead the ESP response to the emerging and ever evolving heat initiatives within the heat market., • Produce in-depth business cases for new scalable and repeatable products and offerings as commercial opportunities arise. This includes working as part of the project team to develop a new product for the implementation of a shared ground loop model targeting small low-density developments., • Responsible for project and program management of complex projects during RIBA stages 1 to 3, managing the internal and external teams, including client design and development management teams, our technical consultants, and industry stakeholders in the delivery and implementation of projects to time and budget., • Collaborate with client teams to define heat strategies aligned with decarbonization targets., • Assess opportunities for 4th and 5th generation heat networks and integrated energy systems., • Evaluate heating and cooling generation options (e.g., heat pumps (air, water, ground), waste heat recovery, heat network zoning)., • Drive innovative, low-carbon design solutions that meet regulatory and sustainability goals., • Scope, tender, review, make tender recommendations, and manage the external design and/or project management teams appointed to undertake detailed design works on behalf of ESP., • Oversee and manage, feasibility studies, concept design, and technical due diligence acting as overall design approval authority for these systems., • Work with and support the ESP Head of Network Design to establish the protocols and systems for simple network design, design variations and design approvals to be conducted via in-house personnel. Business Case Development Establish, prepare, present and implement detailed business cases to internal and external senior stakeholders including: • Revenue projections and tariff structures., • Operational, capital, and lifecycle replacement costs., • Risk analysis and sensitivity modelling., • Identify and structure third-party funding opportunities and financial models., • Prepare final P&L and reports for the board to enable project approvals. Funding & Grant Applications Manage and coordinate applications for government and industry funding schemes such as: • Green Heat Network Fund (GHNF), • Heat Network Efficiency Scheme (HNES), • Other regional or national grant programs., • Ensure compliance with eligibility criteria and reporting requirements. Project Readiness & Regulatory Oversight Working with the ESP Regulatory, Business Change, Operational and Compliance Teams • Establish the systems needed for pay as you go, meter data management and customer relationships management platforms., • Ensure that safe, complaint and efficient heat network assets are specified correctly and meet design, regulatory and operational specifications., • Work closely with project delivery and operational teams to review designs, installation plans, commissioning processes, and handover to operations including development of full asset management plans to ensure smooth and seamless handovers from pre-contract to delivery, and subsequently to operations., • Support the Manager of Heat network Operations on post-installation and asset inspections and acceptance processes to verify assets are installed in accordance to the agreed design specifications, including support with compliance, completions and records assurance., • Identify and resolve issues related to asset performance, durability, and lifecycle management. Stakeholder Engagement Manage relationships with: • Client teams and senior decision-makers., • Internal technical and commercial teams., • Regulators and statutory bodies., • Represent the business in industry forums, conferences, and working groups., • Prepare and deliver presentations to senior client stakeholders and boards., • Act as a thought leader in heat and utilities, and on behalf of ESP contribute to national policy discussions and the development of industry best practice. Qualifications & Experience Essential • Proven experience in heat networks, district energy, or utilities infrastructure., • Strong understanding of low-carbon technologies and heat network design principles., • Ability to develop financial models and business cases for major projects., • Familiarity with UK heat policy, regulatory frameworks, and funding schemes., • Excellent stakeholder management and presentation skills. Preferred • Chartered status in Mechanical Engineering, Energy Systems, or related discipline., • Professional accreditation (CEng, PMP, APM)., • Experience with 4th and 5th generation heat networks and integrated energy systems., • Knowledge of grant funding processes and public sector procurement.

Maintenance Engineer A fantastic opportunity for a Maintenance Engineer has arisen to work for an international organization based in the Mitcham area. Salary - £45,000 + Package Shifts – 4 on 4off (12-hour shifts) Location, commutable from – Mitcham, Southwest London Skills required for the job – Maintenance Engineer • Maintenance and repairs on production machinery, • Electrical engineering, single, 3 phase, motors, inverters & control panels., • Testing and fault finding, • Mechanical, hydraulics, pneumatics, bearings, pumps, chains, and valves., • A range of industrial engineering backgrounds will be considered including Marine, Army and manufacturing etc. Company benefits – • £45,000 basic salary + Overtime + Package, • Training, internal, and external courses, • Excellent career progression opportunities Commutable from: Mitcham, Southwest London Other job titles – multi-skilled maintenance engineer, Shift engineer, electrical maintenance engineer, maintenance technician, Marine Engineer, Marine electrician, REME

Senior Azure SaaS Reliability & Support Engineer - Hybrid (2 days a week in Kingston) - ASAP Start You will be the bridge between support, engineering, and cloud operations • Investigating and fixing complex application and infrastructure issues., • Monitoring capacity, performance, and error budgets across all deployments. 1. Environment Health & Incident Response • Monitor ST and MT environments for server performance, response times, error rates, and application health., • Detect and resolve database issues, stalled file processing, or misplaced storage objects., • Use Azure diagnostics and telemetry to troubleshoot and resolve complex incidents., • Provide third-line support for escalated customer cases, collaborating with development for code-level fixes. 2. Reliability Engineering (Fleet Level) • Maintain uptime, performance, and scalability across all ST and MT deployments., • Define and track service-level objectives (SLOs) and error budgets for different environment types., • Perform capacity planning for servers, databases, and storage, scaling resources before issues occur., • Identify systemic patterns causing downtime and implement fixes at scale. 3. Automation & Tooling • Build scripts and automation (PowerShell, C#, Azure Functions, Logic Apps) to detect and remediate common application or infrastructure issues., • Automate environment health checks and reporting., • Develop self-healing routines for recurring problems. 4. Monitoring & Reporting • Implement and maintain Azure Monitor/Application Insights/Log Analytics dashboards for:, • Environment uptime & performance, • SLA compliance & error budget tracking, • Incident trends and recurring issue analysis, • Provide regular reliability reports and improvement recommendations to stakeholders. 5. Continuous Improvement & Knowledge Sharing • Feed recurring issues and systemic risks into the continuous improvement programme., • Contribute to post-incident reviews with actionable follow-ups., • Uptime: = target SLO % for ST and MT environments., • Error Budget Burn Rate: Maintain within agreed thresholds., • Incident Metrics:, • Reduce MTTR for P1/P2 incidents., • Reduce recurrence rate of common issues., • Automation Impact:, • Number of recurring issues automated/self-healed., • Hours saved through automation vs manual intervention., • Customer Impact:, • Reduced escalations from L1/L2 support. Essential Technical Skills • 3+ years in third-line support, SRE, or cloud operations for enterprise SaaS., • Proven track record in incident resolution and root cause analysis., • Experience working with both multi-tenant and single-tenant cloud architectures., • Strong background in supporting C#/.NET Core/MVC web applications with SQL Server backends and Azure Blob Storage., • Advanced Azure diagnostics (Application Insights, Log Analytics, Kusto Query Language)., • Proficient in SQL for investigation and remediation., • Scripting and automation skills in PowerShell and/or C#., • Understanding of Azure components: App Services, VMs, SQL DB, Blob Storage, scaling strategies., • Experience in capacity planning, SLOs, and error budget management Your Personal Skills and Attributes • Exceptional problem-solving skills with strong attention to detail., • Ability to clearly document findings and communicate with technical and non-technical audiences., • Calm under pressure during high-priority incidents. Your Benefits • Private Medical Insurance: Your health matters, and we've got you covered., • Birthday Off: Celebrate your day your way - it's on us., • Holiday Purchase: Need more downtime? Purchase up to an additional 5 days of holiday., • Employee Assistance Programme: Confidential 24/7 helpline and support for you and your immediate family., • Time for You: We value your personal time. That's why we aim to finish work at 2pm on Fridays., • Better Working: We embrace hybrid working and where it is operationally practicable, we support employees splitting their working time between the office and home.

We are currently seeking a Mobile Refrigeration Engineer! Your key focus will be driving customer satisfaction by delivering high quality diagnostics and timely repairs of customer units on first visit in order to maximise their uptime.You will carry out maintenance repairs and investigations of our

Job Title: Operational Requirements Analyst Location: New Malden. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £50,000 depending on skills and experience What you’ll be doing: • Shape and oversee System Requirements – have a technical grasp of what the requirements mean on a Naval platform, • Support Product Owner in technical solution design, • Technical input to System Design and operability – interpretation of technical requirements into system capability, • Working with Royal Navy Operators and Subject Matter Experts to trial, understand and shape system behaviour Essential: • Experience of Requirement Analysis, • Large-scale Real-Time system experience, • IT literate – use of Word, Excel, Powerpoint etc and ability to pick up software tools and packages, • Naval background, • Technical understanding of software development methods and processes As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive. The BAE Systems INTeACT team: BAE Systems INTeACT is large team (70+) people working on the development of a replacement to the CMS-1 Combat System. This is a large undertaking that will run across an 8-year programme to modernise the system that runs on multiple Royal Navy platforms, to introduce new ways of working and to enable the faster delivery and enhancement of software in a demanding world. This role will provide technical support to the design and implementation of a Combat Systems, to impart an understanding of what good looks like and to help shape new and novel ways of improving the solution. You will have an opportunity to develop and enhance your skills, engage with senior figures within the business and work both with MoD and Royal Navy customers. Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 18th February 2026 – Interviews will take place w/c 2nd March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-RB1 #LI-Hybrid

Job Title: Principal Engineer – Safety Location: Frimley, Weymouth, Bristol, Portsmouth, or Plymouth dependent on role and your personal circumstances. We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role. Salary: Circa £60,000 depending on experience What you’ll be doing: • Providing advice on product safety matters to project and engineering managers delivering the programmes and ensuring the safety considerations are correctly considered and implemented, • Engaging with third parties, to review and gather supporting Design Safety Justification (DSJ) report evidence, • Developing safety arguments, both physical and functional, using appropriate safety analyses methods, producing, and updating DSJ’s and safety management documentation using appropriate regulations and standards Essential: • Degree level qualification (or equivalent experience) in relevant STEM subject (Engineering/ Physics/ Maths/ Science), • Broad knowledge of industry safety standards (such as Def Stan 00-055 and 00-056, IEC 61508 or similar) You’ll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You’ll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts – you may also be eligible for an annual incentive. The Safety & Environmental team: You will have the opportunity to work within a team of engineers and technical specialists to help us design, develop, integrate, manage, and support complex systems and combat sub-systems for in service and future submarines. We offer relocation support packages across all Submarine roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-CB1 #LI-hybrid

Job Title: Principal Engineer – Combat Systems (External Communications) Location: Frimley- we offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role. Salary: Competitive What you’ll be doing: • Define and develop the ECS design through systems engineering principles, including; architecture, requirements, concept solutions and interfaces to enable the development and production of the component sub-systems, • Understand the contractual and performance requirements for communication products and sub-systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities, • Understand and support the flow-down of requirements to suppliers and acceptance of their specific deliverables, ensuring it is captured and recorded appropriately, • Support the EM and PM in supporting bids, proposal development and project planning activities, • Provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer, • Knowledge and experience in wireless communication systems and products in the maritime, defence and/or commercial domains and an understanding of how such systems are used and interact with the overall submarine build programme, • STEM-related degree or equivalent experience within the aerospace/defence/telecommunications/marine environment, • Knowledge of the complete engineering lifecycle with experience in operating in a number of the key lifecycle phases including requirements/system design, and integration and acceptance, • Have a strong awareness of product safety and SHE As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive. The ECS Team The ECS team primarily focuses on designing, developing, and integrating the communications system on-board submarine platforms. As part of this growing team, you’ll explore innovative technologies and integrate them into cutting-edge designs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-KP1 #LI-hybrid

Service & Breakdown Engineer (Domestic Gas).

Contribute to defining and refining AI engineering standards, templates, best practices, hybrid governance guardrails, and reusable assets (AI cookbooks), while building starter agents and configuration patterns that accelerate adoption across Sky. We are seeking an experienced Senior AI Engineer to

Provides technical guidance and mentorship to junior members of the engineering team. We're the team behind your favourite Sky products, and the platforms that power them.

Working in Tech, Product or Data at Sky is about building the next and the new.From broadband to broadcast, streaming to mobile, SkyQ to Sky Glass, we never stand still.We turn big ideas into the products, content and services millions of people love.And we do it all right here at Sky.Design, develo