Trabajos inspector en LutonCrear alertas

\n Quality Inspector CMM\n\n\n Salary £15.00 - £17.00 Per Hour, Plus Overtime & Benefits\n\n\n JOB PURPOSE - Quality Inspector\n\n\n \n\n\n We specialise in the supply of precision machined components in to a variety of high value sectors including Medical, Motorsports, Oil, Gas, Defence and Aerospace.\n\n\n \n\n\n We currently have a requirement for a Quality Inspector to join our team, in a modern well equipped Inspection department, and h...\n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n \n ZIPC1_UKTJ

Asset Inspector East Midlands (Luton, Oxford, Northampton, Colchester) \n If you are a Cable Jointer, Jointers Mate or in a similar role and looking for a new challenge, this could be the role for you! \n Join a leading utilities company that champions innovation and service excellence. At Last Mile, we take pride in delivering high-quality solutions across the multi-utility sector. Our team is growing, ... \n \n \n \n ZIPC1_UKTJ

Quality Inspector (CMM) — Precision Engineering \n Salary: £18 – £21 per hour, depending on experience \n Location: Luton, Bedfordshire \n Working pattern: Full-time, permanent — 40 hours (Monday to Thursday 8am – 5pm, Friday 8am – 2pm) \n About the role \n Pact Engineering is a long-established, family-owned precision engineering company producing high-quality, complex components for the motorsport, food production and wider manufacturing sectors. As we continue to grow, we're looking for a skilled Quality Inspector to help maintain the standards our customers rely on. \n This suits an experienced inspector, or a competent engineer ready to step into a dedicated quality role, who wants to develop within a well-run machine shop. \n What you'll be doing \n\n • Inspecting precision components and finished products against specification\n, • Reading and interpreting engineering drawings, specifications and technical documentation\n, • Using precision measurement equipment including micrometers, gauges and CMM\n, • Identifying and reporting non-conforming components\n, • Producing detailed inspection reports and quality documentation\n, • Identifying defects, supporting root cause analysis and implementing corrective actions\n, • Working with production teams to improve manufacturing quality and reduce defects\n, • Supporting the development and maintenance of quality procedures and ISO9001 standards\n\n What you'll bring \n\n • Experience in quality inspection within a precision engineering environment\n, • Experience programming and operating Aberlink Coordinate Measuring Machines (CMM)\n, • Ability to read and interpret engineering drawings, including GD&T\n, • Knowledge of quality standards such as ISO9001\n, • Good communication skills and the ability to work collaboratively\n\n What's on offer \n\n • Permanent, full-time position with an early Friday finish\n, • Regular overtime available (non-contractual)\n, • Ongoing training and development\n, • 20 days holiday plus bank holidays, increasing with service\n, • Workplace pension scheme\n, • Enhanced sick pay\n, • Free on-site parking, with Luton rail and bus stations close by\n, • A stable, friendly team in an established business\n\n Ready to apply? \n If you want to be part of a respected engineering business where quality comes first, apply now with your CV. \n You may have experience of the following: Quality Inspector, CMM Inspector, CMM Programmer, Quality Control Inspector, Mechanical Inspector, Goods Inspector, Precision Engineering Inspector, Quality Engineer, Inspection Engineer, Quality Technician \n Ref- 230 628 \n

Inspector / CNC Operator \n £30,000 - £40,000 + Half Day Friday + Training + Progression + Benefits \n Luton, Bedfordshire (Commutable from: Leighton Buzzard, Milton Keynes, Hemel Hempstead, St Albans, Bedford, Hitchin) \n Are you an Inspector / Operator / Assembler looking to join a leading company, where you will enjoy a varied local role and work in a state-of-the-art environment? \n This is a fantastic opportunity to work for a well-established engineering firm, that looks after its staff and rewards people with chances to progress and develop. \n The company are a leading component manufacturer for the aerospace industry, working from their state-of-the-art local workshop. You'll be joining a company known for strong values and low staff turnover, where you be recognised as a valuable team player. \n In this role you will help to set and run a range of CNC machines, assist with general assembly work, whilst undertaking occasional quality inspections. The company work with repeat products and high-volume parts. \n The Role: \n\n • CNC Operator / Assembler / Inspector (General Engineer)\n, • Setting and operating CNC machines, general assembly and some quality inspection\n, • Site-based role local to Luton, within an aerospace engineering/manufacturing environment\n, • Monday to Thursday 07:00-16:30, Friday 07:00-12:00\n\n The Person: \n\n • Experience setting and operating CNC machines\n, • Some inspection background preferred\n, • Comfortable with repeat products in a high-volume manufacturing environment\n, • Based locally / able to commute to Luton area\n\n Reference Number: BBBH278566 \n Please click "Apply Now" or contact Ben Fenton at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

FAST Tech Sr (FAR) Unique Skills:CAA B1 or B1/B2 Engineers License with minimum of 3 Gulfstream Aircaft Type ratings.Located withinn 1 Hour of Luton Airport.Education and Experience RequirementsSuccessfully completed an aviation sector apprenticeship or equivalent. • Extensive combined experience in inspection, maintenance or servicing of large/mid-size aircraft (CAT 1). Other EASA Part 66 full B1, B2 or B1/2 License required. Valid Driver’s License required. Other Valid Passport required. Position Purpose:Independently performs a variety of aircraft modifications and maintenance functions on AOG aircraft on road trips and in the Product Support organisation.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Must be available on an on-call basis, with the ability to be on site or dispatched on the FAST aircraft within two hours of the initial contact from Gulfstream. Acts as the single point of contact between Gulfstream and the customer to correctly relay the aircraft schedule and return to service expectations. Performs required. AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate ability to work independently and consistently to perform assigned maintenance and avionics . Compliance with internal and EASA inspection and documentation requirements. Acting as an inspector in support of a specific aircraft, line or base maintenance input in accordance with MOE Part 1.4.6, as revised. Properly completes work order sign-offs, logbook entries, shift turnovers, expense reports and all other paper work in a timely manner. Ensures that all work accomplished meets quality standards and specifications. Certifying tasks that they have been trained on and authorised to perform. Inspect and certify, at both Luton main base and other locations worldwide. In addition, carrying out any other maintenance tasks, requested by the Maintenance Team Leader. For base maintenance this can include Category ‘C’ Certification for those qualified in accordance with MOE Part 3.4, as revised. Establishes and maintains professional working relationship with the customer and provides one-on-one direct familiarization briefings the road trip. Promoting and ensuring that the quality of workmanship in the final product is to a standard acceptable to the EASA and the UK CAA. This is achieved by complying with statutory and company standards for all maintenance and design change work on aircraft and/or components, including ensuring the correct and adequate standards of cleanliness and tidiness for the work in hand. Coordinates with Line Service and FBO operations to schedule and assist with movement of aircraft. Arranges, as needed, for overhaul or repair of customer property and inspect/operate all interior installations and record discrepancies. Provides regular updates on aircraft status and customer support activity to Field Service Representative and management. Compliance with the company’s ‘Maintenance Organisation Expedition, ‘Safety Management System’ requirements, including all health and safety requirements. Understanding and participation of assigned personal Employee Performance Review (EPR) Goals. Ensuring completion of and attendance to all mandatory/identified training courses & CBTs.Additional Functions: Ensuring all relevant corporate policies are understood and complied with. . Attending, when assigned any required. meetings with internal & external customers . Stands in as Technician Sr as requested. .Perform other duties as assigned.Other Requirements: Formal training in the Gulfstream product line maintenance procedures and practices preferred. to include Flight Safety Maintenance initial training for specific models required. to support. Must possess a working knowledge of the company policies and procedures, Repair Station and Quality Control Manual, pertinent process specifications, and technical reference materials. Ability to travel extensively (with short notice) both domestically and internationally. Additional InformationRequisition Number: 234551Category: Service CenterPercentage of Travel: Up to 25%Shift: FAST 9x9 5 Days OffEmployment Type: Full-timePosting End Date: 07/30/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected VeteransGulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | SitemapCopyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

The Company \n A UK leading electronic manufacturer is seeking an experienced a Quality Inspector to join the growing team. \n \n The Role \n This position will be responsible for ensuring all products are consistently manufactured to the required build standard. The position may include aspects of Final Audit, Roving Audit & Specific Area Audit. \n \n Key Responsibilities \n Inspection of PCB assemblies to IPC-A-610 Class 3 standard. \n Inspection of box-build product and mechanical assemblies using customer drawings. \n Issuing and signing certificate of conformity for finished goods. \n Goods Inwards inspection of PCBs, metal work and plastic parts. \n Inspection and evaluation of returned product to identify required repair/rework. \n Completion of RMA reports for submission to customers. \n Identifying and reporting significant or repetitive defects. \n Audit product in accordance with defined build instructions and IPC-A-610 standards \n Ensure all deviations from either defined build instruction or IPC-A-610 standards are clearly identified and logged in line with defined procedures \n Ensure defined processes are robust, clear & concise and can consistently achieve the required standards. \n \n The Candidate \n Experienced as a Quality Inspector within electronics \n Confident inspecting assembled PCB’s \n Able to read and follow drawings \n IPC-A-610 certified would be advantageous \n Understanding and use QMS systems \n \n The Package \n The salary offered for this position is £25,000- £32,000 to candidates who can meet all key qualifications and abilities. \n \n We operate & advertise as an Employment Agency for permanent positions and as an Employment Business for contract/temporary positions

CONTRACT CLERK OF WORKS - DV CLEARED NEW CONTRACT OPPORTUNITY AVAILABLE FOR A DV CLEARED CLERK OF WORKS • Watford (On-site), • Up to £600 per day (Inside IR35), • Initial 6-month contract with strong likelihood of extension, • Active UK Developed Vetting (DV) clearance required (MOD) WHAT WILL THE DV CLEARED CLERK OF WORKS BE DOING? We are supporting a major National Security programme and are looking for an experienced DV Cleared Clerk of Works to oversee the delivery of a secure facility fit-out project in West London. Acting as the client's on-site representative, you'll be responsible for ensuring construction works are delivered to the highest standards of quality, safety and compliance. This is a hands-on role requiring regular inspections, close collaboration with contractors and stakeholders, and meticulous attention to detail throughout the project lifecycle. WE NEED THE DV CLEARED CLERK OF WORKS TO HAVE... • Active UK DV (Developed Vetting) clearance (MOD), • Previous experience working as a Clerk of Works, Site Inspector or Quality Inspector, • Experience overseeing secure construction, defence, government or critical infrastructure projects, • Strong understanding of construction quality standards, building regulations and health & safety requirements, • Ability to identify defects, monitor contractor performance and produce detailed inspection reports, • Excellent communication and stakeholder management skills TO BE CONSIDERED... Please either apply by clicking online or email your CV directly to . For further information, feel free to call me on 07704 152 640. By applying for this role, you give express consent for us to process and submit (subject to required skills) your application to our client in conjunction with this vacancy only. We look forward to hearing from you. JBRP1_UKTJ

As an Asset Inspector, you will provide a comprehensive advisory and support function for the construction and adoption of electricity, gas and water networks that will be taken on by the company. Whats in it for you as an Asset Inspector?. Asset Inspector East Midlands (Luton, Oxford, Northampton,

CNC Operator / Quality Inspector £30,000 - £40,000 + Half Day Friday + Training + Progression + Benefits Luton, Bedfordshire (Commutable from: Leighton Buzzard, Milton Keynes, Hemel Hempstead, St Albans, Bedford, Hitchin) Are you an Inspector / Operator / Assembler looking to join a l

We’re looking for an experienced and detail-focused PCB Inspector to join our team in Bedford. The Role As a PCB Inspector, you’ll be responsible for inspecting assembled printed circuit boards to ensure they meet our quality standards and customer requirements.

Are you an Inspector / Operator / Assembler looking to join a leading company, where you will enjoy a varied local role and work in a state-of-the-art environment?. CNC Operator / Assembler / Inspector (General Engineer).

Substantial experience in building control regulation, including assessing compliance with building regulations and overseeing complex or higher risk building projects. Registration as a Class 3 Category H Registered Building Inspector. Provide expert advice to inform regulatory frameworks and opera

Location: Ampthill, Bedfordshire.Contract: Fixed Term - 12 months.Responsible for the inspection and electrical testing of in-process and completed products, including cable assemblies, wire harnesses, electronic units, and electromechanical assemblies.Ensures products meet customer specifications,

JOB PURPOSE - Quality Inspector. We currently have a requirement for a Quality xdjnayx Inspector to join our team, in a modern well equipped Inspection department, and h.

Quality Inspector needed to check precision machined components for high-value sectors.

Quality Inspector (CMM) — Precision Engineering Salary: £18 – £21 per hour, depending on experience Location: Luton, Bedfordshire Working pattern: Full-time, permanent — 40 hours (Monday to Thursday 8am – 5pm, Friday 8am – 2pm) About the role Pact Engineering is a long-established, family-owned precision engineering company producing high-quality, complex components for the motorsport, food production and wider manufacturing sectors. As we continue to grow, we're looking for a skilled Quality Inspector to help maintain the standards our customers rely on. This suits an experienced inspector, or a competent engineer ready to step into a dedicated quality role, who wants to develop within a well-run machine shop. What you'll be doing Inspecting precision components and finished products against specification Reading and interpreting engineering drawings, specifications and technical documentation Using precision measurement equipment including micrometers, gauges and CMM Identifying and reporting non-conforming components Producing detailed inspection reports and quality documentation Identifying defects, supporting root cause analysis and implementing corrective actions Working with production teams to improve manufacturing quality and reduce defects Supporting the development and maintenance of quality procedures and ISO9001 standards What you'll bring Experience in quality inspection within a precision engineering environment Experience programming and operating Aberlink Coordinate Measuring Machines (CMM) Ability to read and interpret engineering drawings, including GD&T Knowledge of quality standards such as ISO9001 Good communication skills and the ability to work collaboratively What's on offer Permanent, full-time position with an early Friday finish Regular overtime available (non-contractual) Ongoing training and development 20 days holiday plus bank holidays, increasing with service Workplace pension scheme Enhanced sick pay Free on-site parking, with Luton rail and bus stations close by A stable, friendly team in an established business Ready to apply? If you want to be part of a respected engineering business where quality comes first, apply now with your CV. You may have experience of the following: Quality Inspector, CMM Inspector, CMM Programmer, Quality Control Inspector, Mechanical Inspector, Goods Inspector, Precision Engineering Inspector, Quality Engineer, Inspection Engineer, Quality Technician Ref- (Apply online only)

We’re looking for an experienced and detail-focused PCB Inspector to join our team in Bedford. This is an excellent opportunity for someone with a strong eye for detail and a background in electronics manufacturing, PCB inspection or quality control. The Role As a PCB Inspector, you’ll be responsible for inspecting assembled printed circuit boards to ensure they meet our quality standards and customer requirements. You’ll identify defects, carry out visual and technical inspections, and work closely with production and engineering teams to resolve quality issues. Key Responsibilities • Inspect PCBs and electronic assemblies for defects and workmanship standards., • Carry out visual inspection of components, solder joints and assemblies., • Identify and document faults, defects and non-conformances., • Work from drawings, specifications and inspection criteria., • Use appropriate inspection equipment and tools., • Liaise with production and engineering teams to investigate and resolve issues., • Maintain accurate inspection and quality records., • Ensure products meet required quality and industry standards., • Support continuous improvement and quality initiatives. About You We’re looking for someone who is: • Experienced in PCB inspection, electronics manufacturing or a similar quality role., • Ideally certified to IPC standard in the past, or have had expose to IPC Class 1, 2 and 3 standards, • Highly detail-oriented with excellent attention to quality., • Comfortable working from technical drawings and specifications., • Able to identify soldering, component placement and assembly defects., • Methodical, reliable and organised. What We Can Offer • Annual salary of up to £32,000pa, • Stable opportunity within an established manufacturing environment, • Opportunities to develop your technical and quality skills, • Supportive team environment If you’re an experienced PCB Inspector who takes pride in getting the detail right, we’d love to hear from you

Our client in Luton is recruiting for a Final QA and RMA Inspector. A permanent position with competitive salary and excellent benefits. As an experienced QA and RMA Inspector, you will undertake the following responsibilities: Inspection of PCB assemblies to IPC-A-610 Class 3 standard. Inspection of box-build product and mechanical assemblies using customer drawings. Issuing and signing certificate of conformity for finished goods. Goods Inwards inspection of PCBs, metal work and plastic parts. Inspection and evaluation of returned product to identify required repair/rework.Completion of RMA reports for submission to customers. Identifying and reporting significant or repetitive defects. Audit product in accordance with defined build instructions and IPC-A-610 standards Ensure all deviations from either defined build instruction or IPC-A-610 standards are clearly identified and logged in line with defined procedures Ensure defined processes are robust, clear & concise and can consistently achieve the required standards Ensure all processes are stringently adhered to, any gaps or process improvements should be highlighted to your immediate supervision. Skills and experience: Understanding Factory Logix (Aegis) Current Certification to IPC-A-610 (desirable) Component Knowledge & Identification Able to follow Customer Drawings ESD Awareness Experience of collecting information and compiling First Article Inspection reports (AS9102) REF: AM(phone number removed) Response Personnel Aimee McGrath Kim Banes #recruiting #jobs #responsepersonnel

CNC Operator / Quality Inspector £30,000 - £40,000 + Half Day Friday + Training + Progression + Benefits Luton, Bedfordshire (Commutable from: Leighton Buzzard, Milton Keynes, Hemel Hempstead, St Albans, Bedford, Hitchin) Are you an Inspector / Operator / Assembler looking to join a leading company, where you will enjoy a varied local role and work in a state-of-the-art environment? This is a fantastic opportunity to work for a well-established engineering firm, that looks after its staff and rewards people with chances to progress and develop. The company are a leading component manufacturer for the aerospace industry, working from their state-of-the-art local workshop. You'll be joining a company known for strong values and low staff turnover, where you be recognised as a valuable team player. In this role you will help to set and run a range of CNC machines, assist with general assembly work, whilst undertaking occasional quality inspections. The company work with repeat products and high-volume parts. The Role: CNC Operator / Assembler / Inspector (General Engineer) Setting and operating CNC machines, general assembly and some quality inspection Site-based role local to Luton, within an aerospace engineering/manufacturing environment Monday to Thursday 07:00-16:30, Friday 07:00-12:00 The Person: Experience setting and operating CNC machines Some inspection background preferred Comfortable with repeat products in a high-volume manufacturing environment Based locally / able to commute to Luton area Reference Number: BBBH(phone number removed) Please click "Apply Now" or contact Ben Fenton at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates