Trabajos manufacturing assembly en DewsburyCrear alertas

CNC Machinist A CNC Machinist is required to operate CNC and manual machines within a heavy engineering, manufacturing and machining environment, using engineering drawings, Fanuc controls and quality standards. If you’ve also worked in the following roles, we’d also like to hear from you: Manual Machinist, CNC Turner, CNC Programmer, CNC Setter Operator, CNC Machine Operator, CNC Miller, Machining Technician, Manufacturing Machinist SALARY: £32,708 - £34,632 per annum (£17 - £18 per Hour) + Benefits LOCATION: Wakefield, West Yorkshire JOB TYPE: Full-Time, Permanent WORKING HOURS: 37 Hours a Week. 8am to 4.30pm, Monday to Thursday, with half an hour lunch break. 8am to 1pm, Friday JOB OVERVIEW We have a fantastic new job opportunity for a CNC Machinist to run CNC and manual machines within a heavy engineering and manufacturing environment. As a CNC Machinist you will carry out machining operations in line with approved manufacturing routes, engineering drawings, geometrical tolerances and quality assurance standards. The CNC Machinist will also support continuous improvement, maintain machinery checks and lubrication, and take care of measuring equipment while working as part of a skilled machining team. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CNC Machinist include: • Machining Operations: Ensure machining operations and processes are carried out effectively in line with approved manufacturing routes and quality standards, • Continuous Improvement: Actively pursue improvements in assembly methods and techniques, making recommendations for implementation when appropriate, • Machine Checks: Ensure machinery and equipment is adequately maintained and regularly checked for lubrication, • Measuring Equipment: Take care of measuring equipment and report any defective or out-of-calibration items, • Lifting Equipment: Ensure all lifting and transportation equipment is used appropriately, • Quality Standards: Work to high standards and ensure the required quality is achieved when undertaking tasks, • Team Working: Share ideas and knowledge that support continuous improvement across the machining department CANDIDATE REQUIREMENTS ESSENTIAL • Apprentice Trained: Apprentice trained mechanical engineer, • Measuring Equipment: Ability to use manual measuring equipment, • Engineering Drawings: Good understanding of engineering drawings and geometrical tolerances, • CNC Programming: Knowledge of CNC programming, • Fanuc Controls: Experience working with a horizontal machining centre and Fanuc control, • Problem Solving: Self-motivated and enthusiastic, with the ability to solve problems as they arise, • Initiative: Able to work using own initiative and under pressure, asking for help when required, • Team Values: Respectful, inclusive and able to work as part of a small team DESIRABLE • Heidenhain Controls: Experience of working with Heidenhain controls, • Heavy Engineering: Experience of working within the heavy engineering industry BENEFITS • 33 days holiday per annum, • Additional birthday holiday, • Free Parking, • Close proximity to the train station, • Life Assurance x 4 annual salary, • Access to Perkbox gaining monthly flexi points and discounts at major high street shops HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV’s of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14773 Full-Time, Permanent Engineering / Manufacturing Jobs, Careers and Vacancies. Find a new job and work in Wakefield, West Yorkshire. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ

METAL POLISHER STELLEX MANUFACTURING LTD RAF-4186 Company Overview: Stellex Manufacturing Ltd based in Batley are looking for a Metal Polisher . We offer an extensive range of products for use in the catering industry, from the simplest of tables for food preparation through to bespoke servery counters. Throughout the Companys trading history, we have earned a reputation within the catering fabrication and distributor markets for providing high quality solutions and services to all its end users. And are now expanding into the Pharmaceutical and veterinary markets. Main duties will include: Must be proficient and efficient in using hand tools to complete all metal finishing on a variety and size of products. Must be proficient in all aspects of metal polishing including buffing, graining of Stainless Steel and Aluminium.All items must be finished to a high standard. Carry out necessary checks and quality assurance of products prior to final inspection and despatch. Assist with any shop floor activity required involved during the assembly of products, including cutting of materials, removing laser film, cleaning machinery. Maintain and ensure equipment is safe, clean and in good working order, reporting any defaults that may arise. Ensure work areas are kept clean and tidy, adhering to Health and Safety procedures and policies at all times. Any other duties as required within the skill set of this role. Skills & Experience Required: Must possess the knowledge and experience of using a variety of metal finishing techniques including using hand tools. Be fully competent in all aspects of metal polishing including buffing and finishing Have the ability to work within a team or on your own initiative, Must possess previous shop floor experience Be able to solve problems when required. Ability to multi-task and be flexible Possess a can do attitude. Pay attention to detail and quality. What we offer in return: Salary is negotiable dependent on qualifications and experience. Full time, permanent contract. Access to a contributory company pension scheme. An extremely varied and interesting role. To find out more about our Company please visit our company website. We are an equal opportunity employer. Thank you, we look forward to receiving your application. TPBN1_UKTJ

We are currently recruiting experienced MIG Welders to join a busy manufacturing and production team working on a variety of steel fabrication projects. Pay Rate • £15.00 – £16.00 per hour DOE The Role • MIG welding on steel components and fabricated products, • Working from engineering drawings, • Fabrication and assembly duties, • Ensuring all welds meet quality standards, • Working safely within a fast-paced workshop environment Requirements • Previous MIG welding experience essential, • Ability to read and understand technical drawings, • Good attention to detail, • Experience within fabrication or manufacturing environments preferred, • Reliable with a strong work ethic What’s On Offer • Ongoing long-term work, • Weekly pay, • Immediate starts available, • Stable indoor working environment, • Opportunities for overtime To apply or find out more, contact us today with your CV or work history

CNC Machinist A CNC Machinist is required to operate CNC and manual machines within a heavy engineering, manufacturing and machining environment, using engineering drawings, Fanuc controls and quality standards. If youve also worked in the following roles, wed also like to hear from you: Manual Machinist, CNC Turner, CNC Programmer, CNC Setter Operator, CNC Machine Operator, CNC Miller, Machining Technician, Manufacturing Machinist SALARY: £32,708 - £34,632 per annum (£17 - £18 per Hour) + Benefits LOCATION: Wakefield, West Yorkshire JOB TYPE: Full-Time, Permanent WORKING HOURS: 37 Hours a Week. 8am to 4.30pm, Monday to Thursday, with half an hour lunch break. 8am to 1pm, Friday JOB OVERVIEW We have a fantastic new job opportunity for a CNC Machinist to run CNC and manual machines within a heavy engineering and manufacturing environment. As a CNC Machinist you will carry out machining operations in line with approved manufacturing routes, engineering drawings, geometrical tolerances and quality assurance standards. The CNC Machinist will also support continuous improvement, maintain machinery checks and lubrication, and take care of measuring equipment while working as part of a skilled machining team. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CNC Machinist include: Machining Operations: Ensure machining operations and processes are carried out effectively in line with approved manufacturing routes and quality standards Continuous Improvement: Actively pursue improvements in assembly methods and techniques, making recommendations for implementation when appropriate Machine Checks: Ensure machinery and equipment is adequately maintained and regularly checked for lubrication Measuring Equipment: Take care of measuring equipment and report any defective or out-of-calibration items Lifting Equipment: Ensure all lifting and transportation equipment is used appropriately Quality Standards: Work to high standards and ensure the required quality is achieved when undertaking tasks Team Working: Share ideas and knowledge that support continuous improvement across the machining department CANDIDATE REQUIREMENTS ESSENTIAL Apprentice Trained: Apprentice trained mechanical engineer Measuring Equipment: Ability to use manual measuring equipment Engineering Drawings: Good understanding of engineering drawings and geometrical tolerances CNC Programming: Knowledge of CNC programming Fanuc Controls: Experience working with a horizontal machining centre and Fanuc control Problem Solving: Self-motivated and enthusiastic, with the ability to solve problems as they arise Initiative: Able to work using own initiative and under pressure, asking for help when required Team Values: Respectful, inclusive and able to work as part of a small team DESIRABLE Heidenhain Controls: Experience of working with Heidenhain controls Heavy Engineering: Experience of working within the heavy engineering industry BENEFITS 33 days holiday per annum Additional birthday holiday Free Parking Close proximity to the train station Life Assurance x 4 annual salary Access to Perkbox gaining monthly flexi points and discounts at major high street shops HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CVs of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14773 Full-Time, Permanent Engineering / Manufacturing Jobs, Careers and Vacancies. Find a new job and work in Wakefield, West Yorkshire. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ TPBN1_UKTJ

CNC Machinist A CNC Machinist is required to operate CNC and manual machines within a heavy engineering, manufacturing and machining environment, using engineering drawings, Fanuc controls and quality standards. If you’ve also worked in the following roles, we’d also like to hear from you: Manual Machinist, CNC Turner, CNC Programmer, CNC Setter Operator, CNC Machine Operator, CNC Miller, Machining Technician, Manufacturing Machinist SALARY: £32,708 - £34,632 per annum (£17 - £18 per Hour) + Benefits LOCATION: Wakefield, West Yorkshire JOB TYPE: Full-Time, Permanent WORKING HOURS: 37 Hours a Week. 8am to 4.30pm, Monday to Thursday, with half an hour lunch break. 8am to 1pm, Friday JOB OVERVIEW We have a fantastic new job opportunity for a CNC Machinist to run CNC and manual machines within a heavy engineering and manufacturing environment. As a CNC Machinist you will carry out machining operations in line with approved manufacturing routes, engineering drawings, geometrical tolerances and quality assurance standards. The CNC Machinist will also support continuous improvement, maintain machinery checks and lubrication, and take care of measuring equipment while working as part of a skilled machining team. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CNC Machinist include: • Machining Operations: Ensure machining operations and processes are carried out effectively in line with approved manufacturing routes and quality standards, • Continuous Improvement: Actively pursue improvements in assembly methods and techniques, making recommendations for implementation when appropriate, • Machine Checks: Ensure machinery and equipment is adequately maintained and regularly checked for lubrication, • Measuring Equipment: Take care of measuring equipment and report any defective or out-of-calibration items, • Lifting Equipment: Ensure all lifting and transportation equipment is used appropriately, • Quality Standards: Work to high standards and ensure the required quality is achieved when undertaking tasks, • Team Working: Share ideas and knowledge that support continuous improvement across the machining department CANDIDATE REQUIREMENTS ESSENTIAL • Apprentice Trained: Apprentice trained mechanical engineer, • Measuring Equipment: Ability to use manual measuring equipment, • Engineering Drawings: Good understanding of engineering drawings and geometrical tolerances, • CNC Programming: Knowledge of CNC programming, • Fanuc Controls: Experience working with a horizontal machining centre and Fanuc control, • Problem Solving: Self-motivated and enthusiastic, with the ability to solve problems as they arise, • Initiative: Able to work using own initiative and under pressure, asking for help when required, • Team Values: Respectful, inclusive and able to work as part of a small team DESIRABLE • Heidenhain Controls: Experience of working with Heidenhain controls, • Heavy Engineering: Experience of working within the heavy engineering industry BENEFITS • 33 days holiday per annum, • Additional birthday holiday, • Free Parking, • Close proximity to the train station, • Life Assurance x 4 annual salary, • Access to Perkbox gaining monthly flexi points and discounts at major high street shops HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV’s of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14773 Full-Time, Permanent Engineering / Manufacturing Jobs, Careers and Vacancies. Find a new job and work in Wakefield, West Yorkshire. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online | http://www.awdo.co.uk AWD-IN-SPJ

Location: Horley Salary: £28,000 – £32,000 Hours: 39 Hours per week The Role We are seeking a skilled Mechanical Fitter to join a global manufacturing leader of electromechanical testing machinery. You will be responsible for the mechanical assembly of machines and accessories, ensuring all components are fitted to high precision standards. Key Responsibilities Mechanically assemble and build machines, including the fitting of wiring looms and electronic displays. Competently operate tool room equipment, including Pillar Drills, Manual Lathes, Manual Milling machines, and Horizontal Grinders. Fabricate special tools as required and maintain all associated tooling. Ensure all parts are adapted and collated for equipment testing while maintaining quality assurance standards. Interpret engineering drawings and geometric tolerances to ensure accurate assembly. Collaborate with the Assembly Supervisor to report progress, manage drawings, and suggest improvements to working practices. Requirements Education: Apprentice-trained and time-served with an NVQ, HNC, HND, or City & Guilds in Mechanical Engineering. Experience: A solid background in mechanical engineering with close-tolerance assembly skills in a machine-build environment. Technical Skills: Proficient in the use of a variety of hand and machine tools. Attributes: A logical and innovative approach to problem-solving, strong attention to detail, and the ability to work both independently and as part of a team. Compliance: Working knowledge of current Health and Safety best practices

We are currently recruiting for a skilled Panel Wirer to join a leading manufacturing business known for delivering high-quality electrical control systems across multiple industries. This is an excellent opportunity to join a well-established company offering stability, career progression, and a strong team environment. As a Panel Wirer, you will be responsible for the assembly and wiring of control panels and electrical systems to precise engineering specifications. You will play a key role in ensuring all products meet quality, safety, and performance standards. Key Responsibilities • Wiring and assembly of electrical control panels and cabinets • Reading and interpreting electrical schematics and engineering drawings (essential) • Installing components such as relays, circuit breakers, PLCs, and terminal blocks • Point-to-point wiring and cable routing to a high standard • Conducting basic testing and fault finding • Ensuring all work complies with industry standards and health & safety regulations • Working collaboratively with engineers and production teams Skills and Qualifications • Proven experience as a Panel Wirer, Electrical Assembler, or similar role • Strong ability to read and interpret electrical drawings and schematics (essential) • Experience with control panel wiring and assembly • Good understanding of electrical components and systems • High attention to detail and quality of work • Ability to work independently and as part of a team • Relevant electrical qualifications (e.g. NVQ Level 2/3, City & Guilds) • Experience working within a manufacturing or automation environment On offer is a competative overall package. Click apply now for more information. man

Quality Inspector Location: Dewsbury, commutable from Leeds, Wakefield, Huddersfield, Bradford Hourly Rate: £18.53 Temp to Perm after 18 weeks. Excellent employee benefits once permanent The Quality Inspector Role We are looking for a proactive and detail driven Quality Inspector to support inspection, verification and compliance activities across our client's manufacturing operations. You will play a key role in ensuring assemblies, pipework, mechanical systems and modular units meet required specifications, standards and customer expectations. This role is ideal for someone with strong mechanical inspection experience, excellent attention to detail and a passion for driving quality across all stages of production. Quality Inspector Responsibilities Health & Safety Promote a safety first culture and follow all HSE procedures. Identify and report hazards, unsafe conditions and near misses. Quality Control Perform in process and final inspections during assembly. Complete release checks and ensure compliance with specifications. Use Snag R to record defects and verify corrective actions. Support Safe to Despatch checks and produce inspection evidence. Inspection & Test Plans Execute inspection activities in line with ITPs, including witness and hold points. Validate hydrotest evidence, dimensional checks, visual inspections and functional tests. Record all inspection results using approved templates. Maintain full traceability of components and inspection records. Non Conformance & Corrective Action Identify defects and raise NCRs in line with QMS requirements. Verify repairs/rework meet acceptance criteria. Support engineers and QA teams with mechanical root cause investigations. Compliance & Documentation Maintain accurate inspection documentation and quality records. Support production of Quality Packs and ensure evidence completeness. Follow correct document control practices for drawings and revisions. Stakeholder Relations Work collaboratively with production, engineering and QA teams. Provide clear feedback on inspection findings to prevent recurrence. Promote quality awareness across all manufacturing operations. Continuous Improvement Contribute to CI initiatives and defect reduction activities. * Provide input for Lessons Learned / LFE cycles. Quality Inspector Experience Essential Inspection experience within fabrication, modular construction, pipework installation, industrial build or similar. Strong understanding of tolerances and high quality standards. Desirable Experience with pressure testing, hydrotesting or mechanical test procedures. Experience working within an ISO 9001 environment. * Experience of offsite manufacturing. Quality Inspector Qualifications NVQ Level 3 Mechanical, mechanical engineering apprenticeship or similar. ISO 9001 Lead/Internal Auditor qualification (desirable) Membership of a recognised engineering or quality institution (desirable) Internal inspection competency training. * Product or process specific mechanical assembly training. Apply now for this great opportunity to work with an employer of choice, offering training and development. Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities

Company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Graduate Quality Assurance Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables. The successful Graduate Quality Assurance Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse. Key Responsibilities of the Graduate Quality Assurance Engineer will include: Maintain and govern the ISO 9001:2015 management system, ensuring effectiveness through structured auditing and compliance with customer and legislative requirements. Monitor and verify consistent implementation of quality policies and practices, including compliance with applicable regulations, standards, and customer specifications. Work collaboratively within a multi-functional metallurgy and quality team, supporting project delivery and ensuring robust quality governance. Drive continuous improvement of metallurgy processes, systems, and SOPs in line with national, international, and customer standards. Conduct and support material and component verification, including interpretation of certification (chemical analysis, heat treatment, NDT, coatings, etc.). Manage non-conformance processes (NCRs, SDRs, SAP reporting), ensuring traceability, defect control, and timely resolution of quality issues. Support supplier quality, documentation, KPI reporting (including COPQ), and cross-functional communication, contributing to operational performance and compliance. For the Graduate Quality Assurance Engineer role, we are keen to receive CV's from candidates who possess: A basic understanding of ISO 9001:2015 and relevant quality standards Recently graduated with a BEng in Material Science or similar Capability in quality inspection and verification of metallic materials and components. Ability to interpret material certifications, engineering drawings, and technical specifications in line with international standards. Good IT, communication, and cross-functional working skills, with understanding of manufacturing processes such as machining, NDT, welding, and assembly. Salary & Benefits: up to £35,000 depending on experience Monday to Friday 5 hours per week 25 Days annual leave + Bank holidays + up to 12 additional flex days Company pension contributions of up to 8% Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role. To apply for the Graduate Quality Assurance Engineer role, please click "Apply Now" and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information

Our client is a growing and forward-thinking manufacturing business that continues to invest in its people, processes, and facilities. Due to ongoing growth, they are looking to recruit a Mechanical Fitter to join their skilled engineering team. This is an excellent opportunity for a hands-on mechanical professional who is looking to develop their skills and build a long-term career within a supportive and expanding organisation. The successful candidate will benefit from ongoing training, exposure to a wide range of equipment, and genuine opportunities for progression as the business continues to grow. As a Mechanical Fitter, you will be responsible for the assembly, installation, maintenance, and repair of mechanical equipment and machinery, ensuring production operations run safely and efficiently. Key Responsibilities Carry out mechanical assembly, fitting, and installation work on machinery and equipment. Perform planned preventative maintenance (PPM) and reactive maintenance activities. Diagnose and repair mechanical faults to minimise downtime. Read and interpret engineering drawings, technical diagrams, and specifications. Inspect, test, and commission mechanical systems and components. Replace and repair bearings, motors, pumps, gearboxes, conveyors, and other mechanical equipment. Support machinery upgrades, modifications, and continuous improvement projects. Ensure all work is completed in line with health and safety procedures. Maintain accurate maintenance records and documentation. Collaborate effectively with colleagues across engineering and production departments. About You Previous experience working as a Mechanical Fitter, Maintenance Fitter, Mechanical Technician, or similar role. Strong mechanical fault-finding and problem-solving skills. Experience working within a manufacturing, production, engineering, or industrial environment. Ability to read and interpret engineering drawings and technical documentation. Good understanding of mechanical systems, machinery, and maintenance practices. Proactive approach with a strong work ethic and attention to detail. Ability to work independently and as part of a team. Relevant engineering qualifications or apprenticeship would be advantageous. The Package Competitive salary and benefits package. Stable, permanent position within a growing manufacturing business. Ongoing training and professional development opportunities. Exposure to a varied and technically interesting workload. Supportive and collaborative working environment. Genuine opportunities for career progression and advancement. Opportunity to join a business that values its employees and promotes internal development

Mechanical Assembler / Toolmaker £16.00ph - £18.00ph Days only, Monday - Friday 12 Week Temporary - Permanent Opportunity Metalis are currently working with a manufacturing company based in Wakefield who are recruiting for an experienced Mechanical Assembler / Toolmaker to join the team. Duties & Responsibilities: Manufacture, maintain and repair tooling, dies, jigs and fixtures Interpret engineering drawings and technical specifications Carry out fault finding, repairs and preventative maintenance Operate workshop machinery including CNC, milling, grinding and drilling equipment Ensure tooling meets quality and production requirements Support continuous improvement and minimise production downtime Requirements: Previous Toolmaking or Mechanical Assembly experience Ability to read engineering drawings Strong fault-finding and problem-solving skills Knowledge of machining, tooling and manufacturing processes Hours & Salary: £16.00ph - £18.00ph (dependent on experience) Days only, Monday - Friday 12 Week Temporary - Permanent This is an excellent opportunity to join a well-established manufacturer offering a stable, days-based role and long-term career development. Interested? Apply now and one of our experienced consultants will be in touch. TPBN1_UKTJ

Job Title: Pipe Fitter Location: Batley Salary: Competitive Working Hours: Monday to Thursday: 7:00 AM - 4:00 PM Friday: 7:00 AM - 1:00 PM About the Role We are looking for a motivated Pipe Fitter to join our growing team. This is an excellent opportunity for someone looking to develop their skills in a specialist trade, as full training will be provided. While previous pipe fitting experience is not essential, candidates with experience in a similar industry such as fabrication, mechanical assembly, engineering, construction, or manufacturing will be at an advantage. Key Responsibilities Assisting with the installation and assembly of pipework systems Reading and interpreting technical drawings and specifications Measuring, cutting, and preparing materials Using hand and power tools safely and effectively Maintaining high standards of quality and workmanship Following all health and safety procedures Requirements Experience in a similar industry is preferred Willingness to learn and develop new skills Good practical and problem-solving abilities Ability to work independently and as part of a team * Reliable, punctual, and hardworking attitude Benefits Competitive salary Full training provided Early finish every Friday Stable, long-term opportunity * Supportive and professional working environment If you're looking for a hands-on role with excellent training and career development opportunities, we'd love to hear from you. Apply Now Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Futures recruitment are looking to appoint skilled Hydraulic Design Engineer to lead the design and development of bespoke hydraulic systems for a range of industrial and high-integrity applications. Working closely with customers and internal teams, you will be responsible for delivering innovative, reliable, and manufacturable hydraulic solutions from initial concept through to production, testing, and commissioning. Key Responsibilities • Design and develop bespoke hydraulic systems, including hydraulic power units, manifolds, valve blocks, and integrated assemblies, supporting projects through the full lifecycle from concept to final delivery. • Interpret customer specifications and operational requirements, translating them into detailed engineering designs, including 3D CAD models, technical drawings, hydraulic schematics, and Bills of Materials. • Perform engineering calculations and technical assessments to validate system performance, reliability, safety, and compliance with relevant industry standards and design-for-manufacture principles. • Collaborate with customers, suppliers, manufacturing, assembly, and test teams to resolve technical challenges, support project execution, and ensure successful delivery of engineered solutions. • Apply hydraulic engineering expertise and CAD design skills to drive continuous improvement initiatives, support new product development, and deliver solutions across sectors such as defence, nuclear, renewable energy, oil & gas, industrial automation, and specialist infrastructure. Skills & Experience • Proven experience in hydraulic system design, including power units, manifolds, valve blocks, and fluid power systems. • Strong mechanical engineering background within a manufacturing or engineering environment. • Proficiency in 3D CAD software such as SolidWorks, Inventor, AutoCAD, or equivalent. • Experience producing detailed engineering drawings, schematics, and technical documentation. • Strong understanding of hydraulic principles, engineering calculations, and design validation. • Excellent problem-solving skills with a high level of attention to detail. • Ability to manage multiple projects and work effectively with cross-functional teams. Personal Attributes • Proactive and solutions-focused approach. • Strong communication and stakeholder management skills. • Commitment to engineering quality, accuracy, and continuous improvement. • Collaborative team player capable of working independently when required

Night Shift MIG Welder Location Wakefield Pay £15.00 – £16.00 per hour DOE Night Shift PLUS Uplift Shift Pattern Monday – Thursday 7:00pm – 7:00am About the Role We are currently recruiting experienced MIG Welders to join a busy manufacturing and production team in Wakefield, working on a variety of steel fabrication projects. This is an excellent opportunity for skilled welders looking for ongoing night shift work within a stable and fast-paced workshop environment. Key Responsibilities MIG welding on steel components and fabricated products Working from engineering and technical drawings Carrying out fabrication and assembly duties Ensuring all welds meet quality standards Maintaining a safe and organised working environment Working effectively within a production team Requirements Previous MIG welding experience essential Ability to read and understand technical drawings Strong attention to detail Experience within fabrication or manufacturing preferred Reliable with a strong work ethic What’s On Offer Ongoing long-term work Weekly pay Immediate starts available Night shift uplift Overtime opportunities Stable indoor working environment Job Details Full-time night shift role Work Location: In person To apply or find out more, please contact us today with your CV or work history

Manufacturing Lead - Seals and Gaskets Location : Batley, WF17 Job Type : Full-Time, Permanent Salary : £14.50 per hour We are looking for a reliable and hands-on individual to take responsibility for the day-to-day running of our Seals and Gaskets department. The role involves manufacturing a range of products while ensuring work is completed accurately, efficiently, and to a high standard. This is a varied position combining machine operation, bench work, quality control, and general department organisation. The successful candidate will play an important part in maintaining production flow, meeting deadlines, and supporting the overall operation of the business. Main Duties: Operate laser cutters, cutting machines, presses, and associated production equipment. Manufacture seals, gaskets, and related components from drawings, templates, and customer specifications. Carry out bench work including cutting, finishing, assembly, and inspection. Organise and prioritise workload to ensure production targets and deadlines are achieved. Monitor material usage and maintain awareness of stock levels. Maintain high standards of quality, accuracy, and housekeeping within the department. Identify production issues and resolve them in a practical and efficient manner. Ensure all work is carried out safely and in line with company procedures. Support the smooth and efficient day-to-day running of the department. Requirements: Experience within manufacturing, gasket, sealing, rubber, plastics, or engineering environments is beneficial but not essential. Ability to read drawings and work accurately from specifications would be advantageous. Good practical ability and problem-solving skills. Organised, reliable, and capable of managing workload independently. Positive attitude with a willingness to learn and develop within the role. Ability to work well within a team environment while also taking ownership of responsibilities. Full training will be provided on company machinery, materials, and production processes. Working Hours: Monday - Thursday: 7:00am - 4:00pm Friday: 7:00am - 1:00pm Apply today! TPBN1_UKTJ

Supplier Quality Engineer Location : West Yorkshire Hours : 37.5 hours per week (Monday to Friday) Travel : Max. 20% domestic, 5% international About the Company Our client is a globally recognised engineering organisation specialising in mechanical power transmission solutions for critical applications across defence and industrial sectors. With a long-standing heritage and an international footprint, the business delivers high-quality, precision-engineered products into safety-critical environments, with a strong focus on reliability, compliance, and continuous improvement. The Role We are seeking a Supplier Quality Engineer to join a multi-disciplinary quality team responsible for ensuring supplier performance, compliance, and continuous improvement across the supply chain. You will work closely with Quality, Engineering, and Purchasing teams, supporting integrated project teams to ensure suppliers meet all technical, regulatory, and customer requirements. This role plays a key part in maintaining product quality, driving supplier performance, and supporting delivery across complex engineering programmes. Key Responsibilities Evaluate, select, and monitor suppliers to ensure compliance with quality and technical requirements Conduct supplier audits to assess processes, products, and services against regulatory and customer standards Monitor supplier performance and drive improvement through KPIs and corrective actions Manage supplier non-conformances, including root cause analysis and implementation of corrective actions Support product and process validation activities, including on-site supplier verification Ensure compliance with quality and engineering standards (e.g. ISO9001, AQAP, DEFSTAN) Apply quality planning tools including APQP, PPAP, PFMEA, Control Plans, and MSA Maintain supplier quality documentation, reports, and inspection/test plans Raise and manage NCRs and supplier issues through internal systems, ensuring traceability and resolution Collaborate with internal teams to support project delivery and continuous improvement initiatives Build and maintain strong supplier relationships to support long-term performance Key Requirements Experience and Knowledge Experience working within a Quality, Quality Assurance, or Quality Control role Background in an engineering or manufacturing environment Experience with ISO9001:2015 or equivalent quality management systems Knowledge of supplier quality processes and methodologies (APQP, PPAP, PFMEA, etc.) Experience managing non-conformances and applying root cause analysis techniques Ability to analyse data and drive continuous improvement initiatives Experience reading and interpreting engineering drawings and GD&T Technical Skills Strong understanding of manufacturing processes such as machining, heat treatment, welding, assembly, and testing Familiarity with complex mechanical components (e.g. gears, shafts, bearings, gearboxes) Experience using measurement systems and inspection techniques Competent in Microsoft Office and general reporting tools Desirable Auditor certification (ISO9001 or equivalent) HNC/HND in Mechanical Engineering or similar Experience working within defence or highly regulated industries Knowledge of defence standards (AQAP, DEFSTAN, etc.) Personal Attributes Strong problem-solving skills with a structured and analytical approach Excellent communication and stakeholder management skills Ability to work collaboratively across teams and suppliers Proactive and detail-oriented mindset Able to manage multiple priorities in a fast-paced environment What's on Offer Opportunity to work within a highly regulated, safety-critical engineering environment Exposure to complex, high-precision mechanical systems Strong focus on training and development, including internal learning programmes Collaborative and supportive team environment Opportunity to make a direct impact on supplier performance and product quality Additional Information This role is subject to security and export control restrictions. Candidates must meet UK Right to Work requirements, and eligibility may be impacted by nationality or previous nationality due to the nature of the work. TPBN1_UKTJ

Mechanical Fitter / Toolmaker £16.00ph - £18.00ph Days only, Monday - Friday 12 Week Temporary - Permanent Opportunity Metalis are currently working with a manufacturing company based in Wakefield who are recruiting for an experienced Mechanical Fitter / Toolmaker to join the team. Duties & Responsibilities: Manufacture, maintain and repair tooling, dies, jigs and fixtures Interpret engineering drawings and technical specifications Carry out fault finding, repairs and preventative maintenance Operate workshop machinery including CNC, milling, grinding and drilling equipment Ensure tooling meets quality and production requirements Support continuous improvement and minimise production downtime Requirements: Previous Toolmaking or Mechanical Assembly experience Ability to read engineering drawings Strong fault-finding and problem-solving skills Knowledge of machining, tooling and manufacturing processesHours & Salary: £16.00ph - £18.00ph (dependent on experience) Days only, Monday - Friday 12 Week Temporary - PermanentThis is an excellent opportunity to join a well-established manufacturer offering a stable, days-based role and long-term career development. Interested? Apply now and one of our experienced consultants will be in touch

Role: Assembler Based: Morley, Leeds. LS27 Rate: £13.50p/h + holidays (33 days - 25+8BH) Term: 6-12 months - Monday-Friday 37.5hrs (early finish on Friday) Role and responsibilities Due to an increase in work our client is seeking 3 Assembler's to join the team. Correct use of machinery and equipment on the shop floor required. The Assembler will be able to read and interpret working instructions for assembly of products. Conducts all types of assembly work to produce a semi-finished or final products, including the packing where integrated with production lines. Some requirements to use light hand tools. Regular quality testing as part of a defined production process. Conducts shop floor operation in compliance with health & safety guidelines and reports any non-compliance. Operates within standard operating procedures and maintains a clean work area. In this role, you will have the opportunity to support the Emergency lighting unit in achieving the set production targets by adhering to the systems and processes Qualifications for the Assembler role Experience in assembly within manufacturing environments. Strong attention to detail and ability to follow precise instructions. Team player with good communication skills and a positive attitude. Experience with PCBs and wiring would be desirable but not essential Excellent timekeeping and reliability. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients

A leading energy solutions provider in the UK is seeking a Pyro Assembly Operative for their Chalgrove site. This position involves handling explosive materials and performing multi-skilled duties essential for manufacturing ejector seats. The ideal candidate should possess basic manufacturing exper

Define and own assembly processes for complex electro‑mechanical and opto‑electronic module hardware, from early prototype builds through NPI and into production Create and maintain manufacturing documentation including assembly instructions, work standards, process flows, and build records Driv

A leading manufacturing company in Tarporley is seeking a Workshop Manager to oversee a small team.

KineticPlc is seeking experienced Assembly Operatives to join a global company in Handforth, specializing in turbo systems. The role involves assembling turbochargers, performing quality checks, and disassembling for re-manufacturing. Candidates should be health & safety conscious, able to use vario

A leading engineering firm in Staverton is seeking an experienced Production Manager to oversee manufacturing operations.

Candidates should have a manufacturing background, preferably in medical devices, and a willingness to work in fast-paced environments.

Broughton Group in Evesham is looking for a Quality Controller to perform quality inspections across the welding, paint, and manufacturing departments. The ideal candidate will have previous experience in a manufacturing or engineering environment, with strong knowledge of relevant processes.

This is an excellent opportunity to develop your career in a specialist manufacturing environment. Proactive Technical Limited in Lancing is seeking an experienced Assembly Team Leader. You will manage assembly processes, support your team with training, and ensure quality control for production.

Assembly Operative : Manufacturing. This is more than just an assembly role : its a chance to build longAEUR'term skills within a respected manufacturing business that values quality, teamwork and continuous improvement. This role is based at a modern, wellAEUR'equipped manufacturing facility in Cov

Broughton Group is seeking a reliable and hardworking Manufacturing / Assembly Operative to join our growing team in Denby Dale. This role is perfect for individuals who enjoy hands-on work, teamwork, and high quality standards in a fast-paced manufacturing environment.

Build, manage, and lead the Manufacturing, Assembly, Integration and Testing teams responsible for spacecraft production. Support inventory management for manufacturing equipment, tools, and consumables. We are hiring on behalf of an international leader in satellite manufacturing, employing more th

Create and maintain manufacturing documentation including assembly instructions, work standards, process flows, and build records. Act as the primary manufacturing engineering interface with contract manufacturers and external assembly partners. We are looking for a Senior Assembly Manufacturing Eng

A global manufacturing business located in Salfords (Redhill), specialising in the design, manufacture Apply now, read the job details by scrolling down Double check you have the necessary skills before sending an application. As a MechanicalAssembly Technician, you will: Assemble and build material

The Manufacturing & Assembly Technician will assemble electronic components, maintain processes, and ensure quality production.

Unity is advertising this opportunity on behalf of our client.All applications will be directed to our client.Are you an experienced cleaner looking for flexible work that fits around your life?.Whether you’re looking to fill gaps between other jobs or build a full-time income on your terms, this

Cleaner, Landfill Site Offices, Bennadrove (9226).Distant Islands Allowance per annum.Required for 3 hours per week on Saturdays, to carry out general cleaning duties including the maintenance of floors, cleaning and dusting of furniture and fittings in designated areas, cleaning and disinfecting of

Unity is advertising this opportunity on behalf of our client.All applications will be directed to our client.Are you an experienced cleaner looking for flexible work that fits around your life?.Whether you’re looking to fill gaps between other jobs or build a full-time income on your terms, this

Work within the Councils estate of buildings undertaking cleaning duties as directed by line manager in accordance with the practices and procedures of the service.We are keen to employ a diverse workforce that reflects the people of Scotland.We welcome applications from all backgrounds and particul

Unity is advertising this opportunity on behalf of our client.All applications will be directed to our client.Are you an experienced cleaner looking for flexible work that fits around your life?.Whether you’re looking to fill gaps between other jobs or build a full-time income on your terms, this

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 40-week sessional post i.Monday - Thursday, 16:00-18:00.This post is open only to current employees of East Lothian Council (this includes agency/casual

Lilleshall Leisure Trust our goal is to encourage active, healthy lifestyles in an environment that is safe, warm, clean, friendly and fun.To be the destination of choice for being part of an active community.To deliver those services takes an enthusiastic and customer focused team - and right now w

Monday to Friday | 8am-4pm or 9am-5pm.HRGO Recruitment is recruiting for a Facilities Team Leader to support the day-to-day running of facilities operations across multiple sites on the Wirral.This is a practical, varied role focused on coordinating site services, supervising a small team, and ensur

This is your opportunity to join a growing SAP Consultancy with ambitious growth plans, in a newly created role which you can help shape.Strategic Services Sales Lead (SAP Professional Services).Permanent, full time with flexible working.Excellent basic salary and benefits, plus higher earning poten

Control Panel Builder, Panel Wireman, Electrical Technician, Electrical Fitter, Control Panels, Electrical Assembly, Panel Wiring, Electrical Engineer, Manufacturing, Automation, PLC Panels, Switchgear, Water Industry, Wastewater, Process Engineering, Herefordshire Jobs. Control Panel Assembler (Ele

Minimum 2+ years? experience in a high-precision assembly or manufacturing environment (e. Carry out mechanical assembly, integration, and basic functional testing of systems and sub-assemblies.

Are you ready to kickstart your career in the exciting world of electrical manufacturing? We're on the lookout for enthusiastic and skilled Assembly Operatives to join our vibrant team! If you have a passion for hands-on work and a knack for using both power and hand tools, we want to hear from you!

FLT Operator and General Operative.Full Time; Permanent, 39 hours per week.Our client, based on the outskirts of Leeds, has been established for over 25 years and is the market leader in the manufacture of furniture for the Hospitality Industry.They manufacturer and fit out Hotels with bespoke furni

Monday to Friday (22:00 - 06:00).Microsoft suites and warehouse management systems also essentialNexus People are looking for a Team Leader in Bradford to work with our client, who are a leading distribution and logistics supplier in the UK.Team Leader – the role & responsibilities:.

Temporary Productive Operative - Immediate Start.We are currently recruiting on behalf of our client based in.Previous industrial or warehouse experience preferred but not essential.Must be punctual, reliable, and available for an immediate start.If you are available for an immediate start and looki

I am looking for an experienced Mechanical Assembler, looking for a mixed role of Assembly and onsite Fitting, to work for an Industrial Manufacturer based in Leeds. The successful candidate must have previous Mechanical Assembly or Mechanical Fitting experience.