Trabajos manufacturing assembly en LondonCrear alertas

RainfordBerryarerecruitingonbehalfofawell-establishedand highly regarded manufacturing business serving leading UK organisations and brands. They are seeking an experienced WorkshopAssembly Manager to join their team in North West London. \n The Role \n The successful candidate will oversee the daily operations of the joinery assembly area, ensuring efficient workflow, high-quality output and full complia... \n \n ZIPC1_UKTJ

Production Assembly TechnicianLocation:Hook, RG27 9ULJob&Talent are recruiting for and experienced Assembler to perform operational tasks within the assigned area of the business, to undertake and assist in any training or improvement activities as required. To continually develop product and process knowledge while accepting responsibility for their activities and working areas.Duties:Support Line Management at all levels, to meet the business objectives.Comply with all Quality-Health and Safety-and Environmental requirements.To familiarise themselves with all activities within their working areas.Assist with inventory and stock keeping.Ensure physical working spaces meet and exceed company housekeeping standards.Maintain traceability throughout the manufacturing process.Follow Standard Operating Procedures (SOPs) to assemble battery stacks, including the precise alignment of electrodes, frames, separators and bipolar plates.Operate basic pilot line machinery, including mixer dyers, heaters, chillers, pallet trucks or automated dispensing systems. .Skills and Personal Attributes :Self-Motivated timekeeping.1-10 years. No prior battery experience required. Experience in a regulated manufacturing environment (electronics, automotive, plastics, or medical devices)Flexible and Enthusiastic with a Positive Attitude.Prepared to accept responsibility and work toward Level 3 Inspection Training.Able to read and write clear, readable schematics for the manufactured product through effective utilization of schematic tools.Must be comfortable performing repetitive work.Working Hours:The shift pattern will beMonday to Friday - 9:00 - 17:00Salary: From £14 (break is paid)Please note: This role requires a long-term commitment and is not suitable for candidates seeking short-term or temporary work. There is the potential for the role to become permanent, with opportunities to progress into a more senior position.If you are interested in the above role, please click apply.If you are looking to contact our onsite team, please visit the site locator on our website.Job&Talent do NOT charge any fees for our services.Job&Talent acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers.TPBN1_UKTJ

Our client, a well-established, modern and highly regarded manufacturing business, serving leading UK organisations and brands, is seeking an experienced Workshop Manager to join its North West London team. The Role\n The successful candidate will oversee the Joinery and Metal workshops, Assembly teams and Specialist Joinery department, taking responsibility for production planning, workflow, quality,... \n \n ZIPC1_UKTJ

AssemblerJob title: AssemblerLocation: MaidenheadSalary: £30,000 per annumWorking Hours: 8:00am - 4:30pm (early finish on a Friday)As a Assembler your duties will include:Assembling mechanical sub-assemblies and full products in line with engineering specificationsUsing hand tools and basic machinery to build high-quality componentsReading and interpreting engineering drawings and assembly instructionsConducting quality checks and inspections to ensure builds meet required standardsIdentifying faults, reporting issues, and carrying out rework when requiredMaintaining a clean and organised work environmentThe successful Assembler will have the below skills and experience:Previous experience in a mechanical assembly or manufacturing environmentAbility to read and understand engineering drawings and technical instructionsCompetent in the use of hand tools and assembly equipmentStrong attention to detail with a focus on qualityGood manual dexterity and practical skillsExperience working within a production or workshop environmentAs a Assembler you will receive the below benefits:Compressed 4-day working week available25 days holiday plus bank holidays, with the option to buy/sell leaveOvertime paid at time and a half, double time on SundaysPrivate medical insuranceDiscretionary 5% profit bonusPension contribution matched up to 8%Cycle to work schemeEmployee assistance programmeIf you are interested in this Mechanical Assembler role, please click "apply" or contact Charlie at Orion Reading today.Due to the volume of applications we receive, unfortunately we are not able to respond to every application personally. If you have not heard back from us within 5 working days, please assume your application has been unsuccessful. Thank you.INDMANTPBN1_UKTJ

A Production Technician is sought to join an innovative technology company in Cambridge, Cambridgeshire, supporting the assembly, testing, and inspection of advanced MEMS (Micro-Electro-Mechanical Systems) products within a high-tech manufacturing environment.The Production Technician, Cambridge, Cambridgeshire, will be expected to support production activities across assembly, testing, inspection, and quality assurance processes. Working closely with Production, Quality, and R&D teams, you will play a key role in ensuring products are manufactured to the highest standards while supporting the development of cutting-edge sensor technology.Responsibilities include:Assemble and package MEMS devices using manual, semi-automated, and automated production equipment.Perform device assembly onto PCBs and load products into specialist test rigs and systems.Conduct product testing, monitor equipment performance, and accurately record test results.Follow detailed work instructions, SOPs, and batch documentation to ensure compliance with quality standards.Maintain accurate production records and ensure full product traceability throughout manufacturing processes.Monitor output, yield, and quality performance, reporting findings to the Production Supervisor.Identify and escalate process deviations, equipment faults, and non-conforming products.Support basic equipment maintenance, calibration checks, and troubleshooting activities.Collaborate with R&D, Production, and Quality teams to support new product introduction and process improvements.Assist with stock control, goods dispatch, and preparation of customer shipments.Ensure compliance with health and safety procedures and company quality standards.Key skills & experience:Previous experience working within a high-tech manufacturing, electronics, semiconductor, or engineering environment.Hands-on experience using test equipment including digital multimeters, oscilloscopes, regulated power supplies, and signal generators.Practical soldering experience and understanding of electronic principles.Ability to read and interpret electrical schematics, engineering drawings, and technical documentation.Experience working with microscopes, precision tools, and small components.Strong attention to detail and ability to follow documented procedures accurately.Good problem-solving and troubleshooting skills.HNC, BTEC Level 4, or equivalent qualification in Electrical/Electronic Engineering would be advantageous.IPC 610 or IPC 7711/7721 certification would be beneficial.Experience within semiconductor, MEMS, or cleanroom environments would be advantageous.PCB assembly, rework, or repair experience would be desirable.How to apply:Apply now for the Production Technician role in Cambridge, Cambridgeshire. Send your CV to or call Adam Dighton on 01582 878821.TPBN1_UKTJ

Senior Prototype Build Engineer Surrey | Rolling ContractAn exciting opportunity has arisen for an experienced Senior Prototype Build Engineer to lead the delivery of prototype and rolling chassis assets through the physical build phase. This role is responsible for ensuring vehicles are assembled safely, efficiently, and to the required specification, quality, and programme timing.Acting as the engineering lead within the prototype workshop, you will combine technical leadership, build execution, and project coordination to deliver development vehicles that support validation and engineering activities across cutting-edge automotive programmes.This is a hands-on role requiring a strong workshop presence, providing direct support to technicians, driving issue resolution, coordinating engineering changes, and ensuring robust build standards throughout all prototype build phases.Key ResponsibilitiesPrototype Build Delivery Lead the assembly, commissioning, and sign-off of prototype vehicles and rolling chassis. Manage vehicle delivery from build initiation through to workshop completion and handover. Develop and maintain detailed build plans aligned to programme milestones. Coordinate workshop activities to ensure delivery targets are achieved safely and efficiently. Manage build resources including technicians, specialist support functions, and facilities. Conduct build reviews and prioritisation activities to maintain programme timing.Workshop Leadership Provide technical leadership and day-to-day direction to prototype build technicians. Support complex assembly activities and resolve engineering concerns. Ensure adherence to build standards, specifications, and safe systems of work. Foster a culture of accountability, quality, and continuous improvement. Lead recovery actions when timing, quality, or specification targets are at risk.Engineering Integration & Issue Resolution Act as the primary engineering interface within the prototype workshop. Collaborate with design and engineering teams to resolve build issues and improve vehicle maturity. Lead investigation and closure of vehicle build concerns. Manage engineering changes and specification deviations with appropriate controls. Support design reviews, build reviews, and cross-functional engineering activities.Manufacturing Engineering & Process Development Develop and improve prototype build processes, assembly methods, and workshop procedures. Create and maintain build documentation and traceability systems. Capture lessons learned to enhance future vehicle programmes. Support virtual build assessments and manufacturing feasibility reviews. Drive improvements in safety, quality, efficiency, ergonomics, and repeatability.Parts, Logistics & Material Management Work closely with logistics and procurement teams to ensure material availability. Monitor critical parts and escalate shortages impacting build completion. Support robust parts traceability and inventory management processes. Coordinate prototype parts allocation and vehicle configuration management.Vehicle Commissioning & Handover Ensure vehicles are commissioned, validated, and prepared for engineering use. Lead audit activities to confirm build quality and specification compliance. Manage build documentation, configuration records, and engineering databases. Support vehicle sign-off and handover activities.Programme Delivery Support programme timing, resource planning, and budget activities. Provide regular build status updates and risk assessments. Support cost control and programme planning from concept to vehicle delivery.Health, Safety & Culture Champion safe working practices within the workshop environment. Ensure compliance with all health and safety policies and procedures. Promote a positive culture focused on safety, quality, and continuous improvement. Maintain high professional and housekeeping standards.Skills & Experience The ideal candidate will possess: Extensive experience in prototype, low-volume, or high-performance vehicle builds. Strong understanding of vehicle assembly, manufacturing engineering, and workshop operations. Experience leading technicians and coordinating cross-functional teams. Excellent problem-solving and issue resolution skills. Knowledge of engineering change management and configuration control. Ability to interpret engineering drawings and technical specifications. Experience working within automotive development or prototype environments. Excellent communication and stakeholder management skills.Why Apply? This is a unique opportunity to work on cutting-edge vehicle programmes in a fast-paced engineering environment, contributing to the development of next-generation automotive technologies while leading high-profile prototype build activities.TPBN1_UKTJ

PRODUCTION OPERATIVELocation – Larne (Northern Ireland)Type of role – Full time ongoingSalary - £14.27-£28.54/hrHours – Monday to Thursday (37.5hrs/week) – days and nightsAbout the RoleCaterpillar is seeking motivated and reliable Production Operatives to join its manufacturing team in Larne. This is an excellent opportunity to work within a world-class manufacturing environment, contributing to the production and assembly of generator sets while maintaining the highest standards of quality, safety and efficiency.Successful candidates will work across various production areas and play an important role in supporting Caterpillar's commitment to operational excellence.Key ResponsibilitiesAs a Production Operative, your duties will include, but are not limited to:Mechanically preparing substrates to the required standard using power tools.Cleaning and preparing surfaces in accordance with specifications.Stripe coating, cutting in and masking components prior to painting.Assembling sub-assemblies, optional components and complete generator sets.Working from engineering drawings, prints and standard work instructions to manufacture and assemble components.Operating across various production areas, including:Fettle/PaintMachine ShopPaint LineNutsertAssemblyEnsuring compliance with all health & safety procedures and quality standards.Supporting 5S initiatives and continuous improvement programmes.Demonstrating Caterpillar's Values in Action through professional conduct and teamwork.Assisting with the training of colleagues when required.Carrying out any other duties appropriate to the role.Essential RequirementsTo be successful in this role, you should have:The ability to understand and follow detailed verbal and written work instructions.Basic numeracy skills to carry out routine calculations.Good communication skills.Experience working effectively within a team environment.Flexibility to work various shift patterns and reasonable overtime when required.Desirable Skills & ExperienceThe following would be advantageous:Experience using hand tools and power tools.Ability to read and interpret engineering drawings.Previous mechanical or manufacturing experience.Experience working within a lean manufacturing environment.Experience working to takt times or production targets.Basic computer literacy where required.Pay & BenefitsCaterpillar offers a competitive pay package and excellent employee benefits, including:Day Shift: £14.27 per hourNight Shift: £19.03 per hourOvertime (first 10 hours): £21.41 per hourOvertime (after 10 hours): £28.54 per hourAdditional benefits include:37.5-hour working week (Monday to Thursday)Uniform and Personal Protective Equipment (PPE) providedPaid holidaysFull induction and ongoing professional trainingOn-site car parkingStaff canteen facilitiesAuto-enrolment pension schemeWhy Join Caterpillar?Joining Caterpillar means becoming part of a global leader in manufacturing where safety, quality, innovation and continuous improvement are at the heart of everything we do. You'll receive comprehensive training, opportunities to develop your skills, and the chance to build a rewarding career within a supportive and inclusive team.If you're looking for a hands-on manufacturing role with excellent pay, outstanding benefits and long-term career opportunities, we'd love to hear from you.LMINDTPBN1_UKTJ

Assembly Technician - Hayes Salary: £27,000 - £32,000 per annum + £4,000 shift allowance Location: Hayes Shift Pattern: Double days (alternating weekly early and late shifts) We are looking for a motivated and hands-on Assembly Technician to join our growing engineering team based in Hayes. This is an excellent opportunity to work within a fast-paced environment where quality, teamwork and attention to detail are key. As an Assembly Technician, you will be responsible for assembling and preparing large mechanical components in accordance with technical instructions and quality standards. You will play an important role in ensuring work is completed accurately, safely and on schedule. Key Responsibilities: Assemble and prepare mechanical components following technical procedures and work instructions Use hand tools and equipment safely and effectively Carry out inspections for missing or damaged parts Ensure components are correctly identified, handled and protected throughout the process Work to production targets and operational deadlines Maintain tools and equipment to required standards Support continuous improvement and contribute positively within the team Follow all quality, health and safety proceduresWhat we're looking for: Previous experience within a mechanical assembly, manufacturing or engineering environment would be beneficial Experience using hand tools Good awareness of health and safety practices and PPE Strong attention to detail and good manual dexterity Reliable, punctual and able to work as part of a team Positive attitude with a willingness to learn Forklift or overhead crane experience would be advantageous but not essentialAdditional Information: Overtime opportunities may be available Training will be provided The role involves standing for prolonged periods and handling large mechanical components Applicants must have the unrestricted right to live and work in the UKIf you're looking to build a career in a practical engineering environment and want to join a supportive team with excellent development opportunities, we'd love to hear from you

Date Posted:2026-01-16Country:United KingdomLocation:Otis London, 96 Great Suffolk Street, Southwark, London, SE1 0BEWould you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity?Otis is growing and is looking for a Lift Engineer to be based in london.Your priority is to ensure the safety of passengers and technical stakeholders by safely installing a portfolio of elevator / escalator units.On a typical day you will:Install new elevators with quality and efficiencyWork in a safe manner in accordance with all Environmental Health & Safety guidelines.Stay away overnight as and when requiredLiaise directly with the customer while on site to build a good working relationshipConduct inspection before and after installation to ensure high quality and safety standardsWhat you will need to be successfulAs a qualified Engineer, it is essential that you have knowledge of elevator equipment and that you can apply elevator engineering principles to Installation.You are qualified to install elevators to the standards set in your countryYou hold a driver's licenseYou have at least 6 months of experience in the field of elevators, ideally acquired in the assembly activity or at least experience on site and / or installationYou have good electrical and mechanical skills.You are comfortable with plan reading and calculations.You have an appetite for technical products and new technologies.You appreciate manual trades as well as the satisfaction of seeing the finished work.Whats in it for me?A competitive salary, holiday plan and pension scheme.The opportunity to work with market leading technology.Career progression, with the opportunity to flex and mold your career within a global organisation.We will train you intensively in the areas of technology & processes and you can exchange ideas with experienced colleagues at any time.The health and safety of our employees is our top priority. We promote this through regular training on the subject of occupational health and safety as well as through an employee support program.Apply today to join us and build what's next!.If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day.Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio.You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company.When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge.We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs.Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here .TPBN1_UKTJ

Supplier Quality Engineer North West | Hybrid Field-Based Role | £Competitive + PackageWe're recruiting for an experienced Supplier Quality Engineer to join a well-established international engineering and manufacturing business operating within highly regulated industrial sectors.This is an excellent opportunity for someone with strong supplier quality, auditing, and manufacturing experience who enjoys working closely with suppliers, driving continuous improvement, and ensuring the highest quality standards across the supply chain.The role will involve regular UK travel and occasional European travel to supplier sites.The Role You'll be responsible for supporting and developing supplier performance across quality, compliance, and operational capability. Working closely with procurement, engineering, and production teams, you'll help ensure suppliers consistently meet technical, regulatory, and commercial expectations.Key responsibilities include:Conducting supplier audits, assessments, and qualification activitiesSupporting supplier onboarding and approval processesDriving corrective actions, root cause analysis, and supplier improvement plansReviewing technical and quality documentationSupporting new product/component validation processesMonitoring supplier KPIs, scorecards, and risk profilesPromoting continuous improvement and lean manufacturing best practiceEnsuring compliance with relevant quality and pressure equipment standardsWhat We're Looking For Proven experience within Supplier Quality Engineering in a manufacturing or engineered products environmentStrong knowledge of supplier auditing and quality systemsExperience with ISO 9001 and regulated manufacturing standardsUnderstanding of fabrication, welding, machining, and assembly processesExperience using structured quality tools such as 8D, PPAP, APQP, or FMEAAbility to work cross-functionally with suppliers and internal stakeholdersFull UK driving licenceComfortable with regular travel to supplier sitesDesirable Lead Auditor or Internal Auditor certificationExperience within HVAC, pressure systems, fabrication, or heavy engineering environmentsKnowledge of PED and welding quality requirementsEngineering or manufacturing-related qualificationsWhat's on Offer Opportunity to join a globally recognised engineering manufacturerStrong long-term career development opportunitiesHybrid and autonomous working environmentExposure to complex engineering and manufacturing projectsCollaborative and supportive technical team cultureFor a confidential discussion or to apply, please get in touch directly.TPBN1_UKTJ

Joining a growing manufacturing team, the Production Operative – MCU Assembly will support the assembly of high-performance electronic products used across advanced engineering sectors. This is a hands-on role requiring precision, consistency and a strong focus on quality while working with sensitive components in a controlled production environment.The Production Operative – MCU Assembly will be responsible for: Assembling mechanical and electrical components in line with work instructions, engineering specifications and production requirementsOperating assembly equipment and hand tools, including torque-controlled tools and pressesCarrying out in-process quality inspections, visual checks and testing activitiesCompleting production records, quality documentation and traceability requirements accuratelyIdentifying and managing non-conforming materials in accordance with established proceduresSupporting continuous improvement activities and maintaining high standards of workplace organisation through 5S principlesThe Production Operative – MCU Assembly will have: Experience working within a fast-paced manufacturing or production environmentAbility to follow electronic or on-screen work instructions accurately and consistentlyExperience using production hand tools and assembly equipmentAwareness of ESD controls and the requirements of working with sensitive componentsGood component recognition and understanding of handling requirements for precision partsStrong attention to detail with a quality-focused approach to workThis role is ideally suited to someone who enjoys hands-on assembly work and takes pride in delivering quality products within a fast-paced manufacturing environment. If this aligns with your experience, apply with your CV to learn more.TPBN1_UKTJ

RE Recruitment are proud to be working in partnership with PHINIA to recruit Assembly & Test Technicians at their site based in Stonehouse, Gloucestershire, starting immediately.PHINIA is a global leader in the design and manufacture of premium fuel systems, electrical systems, and after market components for internal combustion engine (ICE) vehicles and industrial applications.Position OverviewAs an Assembly & Test Technician, you will be responsible for the set up, calibration, and resolution of technical issues on all equipment within your allocated cell. You will also provide training and support to operators to ensure equipment is maintained and operated effectively, achieving output targets in line with quality and health & safety standards.Assembly & Test Technician Key Responsibilities:·Set, check, and calibrate all gauging equipment within the cell·Manage the start up, resetting, running, and shut down of all machines, including fixtures, tooling (ordering included), and work handling equipment·Proactively fault-find and resolve issues impacting safety, quality, or output targets·Maintain equipment to the highest standards, ensuring maximum performance and OE targets are achieved·Complete all routine maintenance tasks without fail, including coolant and filtration checks·Train operators within the cell and oversee sign off against training plans·Ensure quality procedures are adhered to and respond promptly to quality problems·Support and implement continuous improvement activities, including scrap reduction, OE improvements, and process controls·Communicate the importance of meeting customer, statutory, and regulatory requirements·Escalate any customer quality concerns immediately to the relevant Product Line Quality team·Attend plant communications to stay aligned with business objectives and requirements·Follow quality procedures to achieve defined quality objectivesEssential Skills & Experience·Recognised Level 3 Advanced Apprenticeship in Mechanical Engineering or equivalent technical qualification desired, however level 2 qualifications also considered.·Motivated team player with a commitment to total quality·Experience in a similar technical role within a high-volume, fast-paced manufacturing environment·Strong communication skills across all levels of the businessPersonal Attributes·Self-motivated with a flexible, positive attitude towards work·Able to stay calm in high-pressure situations·Excellent attention to detail and ability to prioritise workload·Team-oriented and respectful of colleagues (Equality and Diversity)·Able to comply with Health, Safety, and Environmental regulations, including PPE requirementsBenefits·Immediate start available·Friendly and supportive working environment·On-site canteen·Free parking·Comprehensive training provided·Opportunity to join a leading manufacturing companyOur client is offering the successful Assembly & Test Technician a Pay Rate of £17.00 - £20.30 (Variable depending on shift pattern) per hour + overtime + holiday allowance.A typical shift pattern: 12-hour rotating shifts covering days and nights on a 4-shift pattern·Week 1: 4 Nights (Mon-Thu, 7pm-7am)·Week 2: 3 Days (Mon-Wed, 7am-7pm) and 3 Nights (Fri-Sun, 7pm-7am)·Week 3: 4 Days (Thu-Sun, 7am-7pm)·Week 4: Week offOther shift patterns available including a 3-shift pattern, double days, nights onlyIf you are a technically skilled, proactive Assembly & Test Technician seeking an opportunity within a dynamic and supportive environment, we would love to hear from you.PS4TPBN1_UKTJ

Production Build Technician's Required London About the Role We are recruiting for a Production Build Technicians to join a leading automotive manufacturer working on innovative vehicle programmes. This is an excellent opportunity to become part of a highly skilled engineering team responsible for the assembly, testing and development of complex mechanical and electrical systems. The successful candidate will have a hands-on engineering background and will be confident working from engineering drawings to build and test high-quality assemblies. Key Responsibilities Assemble mechanical and electrical components to engineering drawings and work instructions. Carry out the fabrication and fitting of components and sub-assemblies. Perform functional testing, fault finding and debugging of assemblies to ensure they meet specification. Interpret engineering drawings, technical documentation and assembly procedures. Support prototype builds and new product development activities where required. Carry out basic machining, fabrication or welding activities as part of the build process. Identify build issues and work with engineering teams to implement improvements. Ensure all work is completed to the required quality, safety and manufacturing standards. Maintain a clean and organised working environment in line with company procedures.Candidate Requirements To be considered for this role, you should have: Mechanical and electrical assembly experience. Strong understanding of mechanical engineering principles. Experience of assembly, fabrication and fitting. Experience carrying out testing and debugging activities. Basic machining, fabrication or welding experience. Ability to read and interpret engineering drawings. Good IT skills and confidence using engineering software and documentation. Previous experience within the automotive industry. Excellent communication skills and the ability to work effectively within a multidisciplinary team. Full eligibility to work in the UK.Desirable Skills The following would be advantageous but are not essential: Experience within electric vehicle (EV) manufacturing. Experience in motorsport engineering. Prototype or low-volume vehicle build experience. Knowledge of automotive quality standards and lean manufacturing principles.What's on Offer Competitive salary. Opportunity to work on cutting-edge automotive projects. Supportive engineering environment with opportunities for development. Modern manufacturing facilities and equipment.Long-term career progression within a growing organisation Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

ManufacturerPitstone, Tring, Hertfordshire£35,508 per annum + 14.5% shift premiumBenefits: 6% Bonus, Excellent Pension, 33 Days Holiday, Dental, High street discounts, Workplace nursery scheme, Midday finish on Fridays, Enhanced family friendly policies, Wellbeing programme, Employee assistance programme including health and finance, Onsite subsidised canteenSkills: Hand tools, Mechanical overhaul, Fitting, Repairs, Workshop, Maintenance, Winding, Servicing, Brazing, Wiring, Impreg, SprayingShift PatternWeek 1:Monday to Thursday: 6.00am to 2.00pmFriday: 6.00am to 11.00amWeek 2:Monday to Thursday: 2.00pm to 10.00pmFriday: 11.00am to 4.00pmThis shift pattern attracts a 14.5% shift premium on basic salary above.At Safran, excellence is a journey - and we'd love you to be a part of it. As a global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future.We are looking for passionate individuals to join our Operations team as a Manufacturing Technician at our Pitstone site.Your RoleRepair and assembling of aircraft generators and rotorsFollowing Engineering drawings and work instructionsOperate machinery in accordance with standard operating proceduresStrip, survey and fitting experience for generators and motorsIdentify opportunities for continuous improvement to work area and processes.What You'll BringWe are looking for candidates with a range of skills and experience, but we're also keen to help people grow and develop in this role. If you have experience in fitting, repairs, assembly and/or test from any relevant industries we'd love to hear from you. We ask that you are able to lift weighs of up to 25kgs, and have some technical abilities to learn our products.Get involved:We also have a number of groups and forums onsite that you can get involved with, including Women at Safran, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs.Our Wellbeing Program in Pitstone aims to place employee wellbeing at the heart of our business, and we integrate it within all that we do. The program is made up of four wellbeing committees; Healthy Minds, Physical, Social & Financial. Our enhanced family friendly policies re-enforce our commitment to providing a workplace that is both diverse and inclusive.TPBN1_UKTJ

Service Engineer | Training | £50,000+ Potential | Overtime x1.5 - 2.0 | Company Van | ProgressionA Service Engineer opportunity has become available with an established manufacturer supplying specialist thermal management systems across a range of growing industries. As the business continues to expand its UK operations, this position offers premium overtime, paid commute time, a company van and genuine opportunities for long-term career progression.Covering customer sites across the West London area, this is an excellent opportunity to develop your mechanical and electrical skillset whilst working within an ever-growing industry.Service Engineer responsibilities include -Installing mechanical and electrical components across customer sites.Carrying out planned component changeovers to minimise customer downtime.Following technical drawings, instructions and engineering procedures.Completing installation and commissioning activities to the required quality standards.Maintaining high health and safety standards whilst working on customer premises.Service Engineer desirable skills and education -Experience in a similar role - MOT Tester, Vehicle Technician, Mechanic, Automotive Technician, Mechanical Fitter, Assembly Technician, Service Engineer or within a similar hands-on engineering environment.Time served, or Mechanical / Electrical educated (IMI, FGAS, BTEC, HNC or degree desirable).Basic hands-on experience with mechanical assembly (study, home projects or work-based).Experience working within automotive, commercial vehicle, HVAC, refrigeration, manufacturing or field service environments would be advantageous.Ability to follow technical drawings, instructions and assembly procedures.Service Engineer benefits include -Training provided from day one.£50,000+ earning potential.Readily available premium overtime @ 1.5 - 2.0.Paid commute time.Company van and fuel card.Buddy-up system and certified training if required.25 Days' Annual Leave.Long-service award scheme.Enhanced maternity and paternity packages.Clear career progression opportunities.Working for a leading business within an ever-growing industry.If you'd like to know more about this Service Engineer position, please apply through this advert immediately .ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.TPBN1_UKTJ

Assembly OperativePay:AM Shift: £12.71 per hourPM Shift: £13.31 per hourLocation: Round Spinney, Northampton (NN3)Barker Ross is recruiting Assembly Operatives for a fantastic opportunity with our client in Northampton. This is an excellent role for individuals looking for stable, long-term work with the potential to become permanent after a successful period. Full training is provided, making it suitable for both experienced candidates and those looking to build a career in manufacturing.Shift PatternAM Shift Monday - Thursday: 06:00 - 12:00Friday: 06:00 - 13:00PM Shift Monday - Thursday: 14:00 - 22:00 Friday: 13:00 - 20:00Why Join Us?Competitive hourly pay: £12.71 (AM) / £13.31 (PM)Paid breaksOn-site parkingCompany pension schemeHoliday entitlementFull training providedSupportive, team-focused working environmentLong-term temp-to-perm opportunityThe Role :In this role, you will be working in a busy production and manufacturing environment where attention to detail and consistency are key. You will be responsible for assembling small to medium-sized components to a high standard, ensuring all products meet strict quality requirements.You will work at a designated workstation, following clear step-by-step instructions and production guidelines. The work is repetitive but requires focus, accuracy, and care to ensure all items are assembled correctly and meet customer expectations.Daily duties will involve handling small parts, checking them for defects, fitting components together, and preparing finished items for the next stage of production or dispatch. You will also be required to carry out basic quality checks throughout the process to ensure standards are consistently maintained.Once trained, you will be expected to work independently while still being part of a supportive production team. You will need to maintain productivity targets while ensuring quality is never compromised.Key Responsibilities:Assemble small parts accurately and efficientlyWork from clear instructions and production guidelinesCarry out visual quality checks on componentsIdentify and report any defects or issuesMaintain consistent production outputEnsure a clean and safe working environmentFollow all health & safety proceduresRequirements:Strong attention to detailGood hand-eye coordination and dexterityGood eyesight for small componentsReliable, punctual, and motivatedAbility to follow instructions accuratelyPrevious assembly or production experience is an advantage but not essentialHow to Apply:Click Apply or email your CV to: (Northampton Branch)Join a company that values quality, teamwork, and development - apply today!Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.TPBN1_UKTJ

Cable Assembly Operative £13ph holiday accrued or £14.50ph Holiday paid Southall Proactive are urgently recruiting for Cable Assembly Operative to works in our busy cable department assembling data and power cables to a high standard of quality. Responsibilities include: Carry out the cable assembly process, including soldering, as instructed by following printed assembly instruction documents Carry out custom labelling of cable assembly products as instructed by supervisor and by following printed custom label instruction documents Carry out quality control of cable assemblies following written instructional documents Advise Cable Lead of any broken, incomplete parts, as well as inconsistencies/safety hazards. Transport connectors and cables from warehouse to assembly area Stack/organize completed cable assemblies per work order or sales order Test all cables and place individual tested labels on "main" cablesSkills/Requirements Good working knowledge of, or willingness to learn, basic connectivity issues and assembly concepts Soldering skills Cable assembly experience Electrical assembly experience Electronic assembly experience Experience working with electrical connectors, cable, or wires Familiarity with the use of hand tools - especially electrical hand tools (wire cutters, wire strippers, connector crimp tools etc)Hours: 8.00am-4.30pm Monday to Friday Location: Southall, UB2 Rate : £13 holiday accrued or £14.50 Holiday paid How to Apply: For more information on the role, or any discussion regarding opportunities we have available, please contact Namandeep Kaur on (phone number removed) or . Why work with Proactive? Proactive Technical Recruitment is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

MIG Welder - Day ShiftCarnaby, East Yorkshire£21.33 - £24.00 per hour DOEMonday to Friday, 17:00 - 01:30Temp to PermWeekend overtime availableWe are currently recruiting for experienced MIG Welders to join a well-established steel fabrication and manufacturing business based in Carnaby.This is a temp-to-perm opportunity offering excellent rates of pay, regular overtime and the chance to secure a permanent position with a growing manufacturer. You'll be working within a busy production environment, manufacturing high-quality fabricated steel products for a variety of industrial and construction sectors.The RoleAs a MIG Welder, you'll be responsible for producing high-quality welds while working from engineering drawings and fabrication specifications.Key duties include:MIG welding stainless steel and mild steel componentsReading and interpreting engineering drawingsPreparing materials for welding, including grinding, cleaning and fit-upInspecting completed welds to ensure quality standards are metCarrying out basic fabrication and assembly work when requiredWorking to production schedules and customer specificationsMaintaining a safe, clean and organised work areaFollowing company health, safety and quality proceduresWhat We're Looking ForPrevious MIG welding experience within a manufacturing, engineering or fabrication environmentAbility to read and interpret engineering drawingsExperience welding stainless steel and mild steelStrong attention to detail and commitment to qualityAbility to work independently and as part of a teamReliable and hardworking with a positive attitudeFlexible to work overtime when requiredDesirable ExperienceMIG/MAG welding experienceWelding qualifications or coding certificationsExperience within structural steel, heavy fabrication or bespoke manufacturingExperience working to recognised quality standardsWhat's On Offer?Regular overtime opportunitiesTemp-to-perm opportunityLong-term career prospectsStable workload with a growing businessSupportive team environmentTraining and development opportunitiesIf you're an experienced MIG Welder looking for your next opportunity, we'd like to hear from you. Apply today.Aqumen recruitment is operating as a employment business in relation to this vacancy.TPBN1_UKTJ

Design a mechanism that restores movement to someone who lost it, from a blank sheet between two fixed interfaces on a new robotic prosthetic subsystem. This Senior Mechanical Engineer role is in Leeds, hybrid around 2 days a week, paying up to £60,000, with flexibility to £65,000 for the right person. Scope of the Role As a Senior Mechanical Engineer, you own the mechanical design of a subsystem end to end, from a blank sheet to a tested, manufacturable design. Design load bearing, moving structures at small scale, to tight packaging constraints. Take concepts into SolidWorks and produce detailed design, with drawings to BS 8888. Run structural and tolerance analysis behind your designs, including FEA and hand calculations. Build custom test fixtures and take your designs through verification and validation. Select materials and manufacturing methods with design for manufacture and assembly in mind. Key Skills and Experience Required Extensive experience in mechanical design, as a Senior Mechanical Engineer or Mechanical Design Engineer, not product design or CAD only. A track record designing moving assemblies, mechanisms or articulated parts, with bearings and constraints. Experience in a regulated environment such as medical devices, aerospace or defence, with risk management. Experience owning mechanical engineering as sole or near sole engineer, not one of a large team. Confident in SolidWorks or similar 3D CAD, with full existing UK right to work. Salary and Benefits Up to £60,000 base salary, with flexibility to £65,000 for an exceptional candidate Hybrid working, around 2 days a week on site A direct line to the technical lead, with no project managers in the way Full ownership of a subsystem, with real say over materials, methods and test approach As a Senior Mechanical Engineer here, you join a business with more than a century in prosthetic and assistive technology, selling globally. The team is building a new robotic prosthetic device from the ground up, and you own a defined subsystem within it. It is a small team, fewer than five people, giving you real ownership and a direct line to the lead. What you design ends up on someones arm, giving them back function they had lost. How to Apply Want to find out more? Click apply and we will be in touch. TPBN1_UKTJ

Up to £16.81 per hour | Up to £34,970 per year (based on a 40-hour week) | Overtime Available Hours: Monday to Thursday, 40-hour working week (4-day week) Contract: Permanent An opportunity has become available for an experienced Coachbuilder to join a leading specialist vehicle conversion company based in Doncaster. Due to continued growth and a strong order book, the business is looking to expand its production team. The company boast a modern manufacturing facility where you'll work on high-quality commercial vehicle conversions, enjoy a four-day working week, and have genuine opportunities for long-term career progression. Duties of the Coachbuilder: • Assembly and fitting of specialist commercial vehicle conversions - Installation of interior panelling, flooring, racking and storage systems - Fitting vehicle accessories including steps, tow bars and ramps - Using hand and power tools to complete high-quality builds - Working from technical drawings and build instructions - Carrying out quality inspections throughout the build process - Maintaining a clean and safe working environment We would welcome applications from: • Coachbuilders - Vehicle Fitters - Mechanical Assemblers - Bodybuilders - Vehicle Conversion Technicians - Production Fitters - Commercial Vehicle Technicians Benefits of the Coachbuilder role • Up to £16.81 per hour - Up to £34,970 per year - Four-day working week - Overtime opportunities available - Weekly pay - Free onsite parking - Modern, clean manufacturing facility - Excellent long-term career progression with a growing specialist vehicle manufacturer If you would like a private chat about the Coachbuilder opportunity, please contact Rodger Morley at E3 Recruitment TPBN1_UKTJ

Deburr Operator Precision Engineering | Aerospace Manufacturing | Wolverhampton Do you take pride in producing high-quality work and have an eye for detail? Join our team and play a vital role in manufacturing precision aerospace components that help keep the world moving safely and efficiently. We're looking for a Deburr Operator to support our aerospace manufacturing operation by ensuring machined components meet exacting quality and performance standards. Working with highly engineered parts, you'll be responsible for transforming machined components into finished products ready for assembly and flight-critical applications. This is an excellent opportunity to develop your skills in a precision engineering environment where quality, craftsmanship, and teamwork are at the heart of everything we do. What You'll Be Doing As a Deburr Operator, you'll be responsible for: Precision Finishing & Deburring Removing burrs, sharp edges, and excess material from machined aerospace components. Performing finishing activities including polishing, blending, chamfering, and radiusing. Ensuring parts meet exact surface finish and dimensional requirements. Working carefully with intricate and high-value aerospace components. Quality & Inspection Reading and interpreting engineering drawings and manufacturing instructions. Inspecting components using measuring equipment such as calipers, micrometers, gauges, and visual inspection tools. Identifying and reporting any non-conformances. Maintaining the highest standards of quality and attention to detail. Supporting Manufacturing Operations Collaborating closely with Production, Quality, and Engineering teams. Preparing components for downstream processes including coating, assembly, and shipment. Following established aerospace quality and safety standards. Equipment Care Maintaining deburring tools and equipment in good working order. Reporting wear, damage, or maintenance requirements promptly. Ensuring a safe and organised work area. What We're Looking For We're interested in candidates who can demonstrate: Previous experience in deburring, metal finishing, polishing, or precision manufacturing. Strong manual dexterity and excellent hand-eye coordination. The ability to work accurately with small, detailed, and complex components. Experience interpreting engineering drawings and technical instructions. A keen eye for detail and commitment to producing high-quality work. Experience using hand tools, power tools, and measuring equipment. Desirable Experience Aerospace, automotive, machining, or precision engineering experience. Knowledge of AS9100, ISO9001, or similar quality standards. Understanding of lean manufacturing principles. Experience working with materials such as aluminium, titanium, or composites. Training will be on days, then you will move to a shift pattern of mornings and afternoons. (6am - 2pm, 2pn-10pm) which attracts a shift allowance. What We Offer: Flexible benefits package and development opportunities to support career progression 33 days annual leave (including bank holidays) Private medical insurance, mental health support, and financial advice Generous life assurance and company pension contribution (from 6%) Employee share options, free onsite parking, and EV charging Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security If you're passionate about precision, quality, and manufacturing excellence, we'd love to hear from you. Apply today and help us deliver engineering solutions that make a difference. TPBN1_UKTJ

Our client, a leader in the Defence & Security sector, is currently seeking a dedicated Manufacturing Team Leader to join their team on a permanent basis. The role will be based in Gosport site with state-of-the-art facilities. Key Responsibilities: Lead and develop workshop staff to deliver complex machining and assembly activities safely and to schedule Own day-to-day manufacturing delivery, providing technical and operational support to the workshop Drive a strong health and safety culture through risk assessment, COSHH and active hazard management Manage performance, capability development, SQEP and succession planning within the team Work collaboratively with engineering, operations and project teams to support delivery and problem-solving Champion continuous improvement to improve quality, efficiency and team resilience Job Requirements: Proven experience leading and managing manufacturing or workshop teams Significant experience working within low-volume, bespoke or R&D manufacturing environments Strong understanding of machining, assembly and close-tolerance manufacturing processes Experience operating within regulated or safety-critical industries Demonstrated capability in performance management, coaching and developing technical staff Experience planning resources, priorities and workload to meet delivery commitments Qualifications: Relevant apprenticeship in a mechanical, manufacturing or production engineering discipline or demonstrable equivalent experience HNC or HND in Mechanical Engineering, Manufacturing Engineering or Production Engineering or equivalent practical experience Benefits: Matched contribution pension scheme, with life assurance Generous holiday allowance, with the option to purchase additional days Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more Support for the Armed Forces community, honouring the Armed Forces Covenant and maintaining Gold Award standard in the Defence Employer Recognition Scheme Volunteering Opportunities - helping charities and local community If you are a proficient Manufacturing Leader seeking an opportunity to make a significant impact within the Defence & Security sector, we would be excited to hear from you. Apply now to join our client's innovative and dynamic team at their Gosport site. TPBN1_UKTJ

Quality Engineer (Automotive) Bolton Days Role £40,000 - £45,000 + Bonus About the Opportunity An exciting opportunity has arisen for an experienced Quality Engineer to join a global automotive technology manufacturer at its Bolton facility. Their focus on quality, continuous improvement, electrification and next-generation vehicle technologies makes this an excellent opportunity for a quality professional looking to develop their career within a highly technical manufacturing environment. Key Responsibilities - Quality Engineer (Automotive) Act as the primary customer interface for all quality-related issues. Manage line returns, warranty returns and customer complaints, ensuring robust corrective actions are implemented. Monitor, analyse and report quality KPI performance, driving continuous improvement initiatives. Support Quality Technicians with product investigations and testing activities. Develop and maintain quality procedures, work instructions and test specifications. Manage internal and external concession requests. Conduct supplier audits and support supplier quality improvement activities. Complete customer quality documentation including APQP, PPAP and related requirements. Analyse process capability and R&R data, working closely with Production Engineering to improve manufacturing performance. Ensure compliance with customer-specific requirements, IATF 16949 standards and internal quality systems. Experience/Qualifications - Quality Engineer (Automotive) HNC/HND qualified in Mechanical, Electrical or Manufacturing Engineering. Minimum 5 years' experience within a Quality Engineering position. Automotive manufacturing experience is preferred, although applications from high-volume electronics or assembly manufacturing environments are also welcome. Strong understanding of IATF 16949 and automotive quality tools. Experience with APQP, PPAP, FMEA, SPC, Control Plans, Process Flow Analysis, R&R Studies and structured problem-solving methodologies. Experience liaising directly with customers and suppliers on quality matters. Proficient with Microsoft Office applications, particularly Excel and Word. Excellent communication and stakeholder management skills. Benefits - Quality Engineer (Automotive) Discretionary Annual Bonus (7.5%) Up to 5.5% Employer Pension Contribution Electric Vehicle Scheme via Salary Sacrifice Free EV Charging On Site Private Medical Insurance Death in Service Cover (4x Annual Salary) For more information on this role, please contact Charlie Boulton on 01453 852544, or send an email to For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include : Quality Engineer, Senior Quality Engineer, Customer Quality Engineer, Supplier Quality Engineer, QA Engineer, Manufacturing Quality Engineer, Quality Assurance Engineer, Product Quality Engineer, APQP Engineer, Quality Systems Engineer, Automotive Quality Engineer, Continuous Improvement Engineer, Quality Specialist, Quality Lead, Process Quality Engineer. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. TPBN1_UKTJ

Multi Skilled Maintenance Engineer £40,000 - £45,000 + Overtime + Training Newmarket, Suffolk Are you a Maintenance Engineer, Electrical Maintenance Engineer, or similar and ideally from a manufacturing background, looking to join an established company offering overtime, training, and the opportunity to work on a wide range of production machinery and site equipment? On offer is the opportunity to join a well-established packaging manufacturer where you will work alongside machine operators and the maintenance team to keep machinery, site assets, and facilities running safely and efficiently. You will play a key role in reducing downtime, improving uptime, and supporting the production of high-quality packaging within a busy manufacturing environment. In this varied role, you will carry out planned preventative maintenance, reactive repairs, fault finding, machinery repairs, fitting, assembly, and general building maintenance. You will work closely with machine operators, production teams, and the wider maintenance department, helping to fit parts, identify faults, offer solutions, and ensure preventative maintenance schedules are followed. This role would suit a Multi-Skilled Maintenance Engineer with an electrical bias who is looking for a hands-on role with overtime at enhanced rates, training within a manufacturing environment. The Role: Planned preventative maintenance, reactive repairs, and fault finding on production machinery Electrical and mechanical maintenance, fitting, assembly, and general site maintenance * Based in Newmarket, with overtime available at enhanced rates The Person: Maintenance Engineer, Electrical Maintenance Engineer, or similar Electrically Biased * Commutable to Newmarket Reference:BBBH26434A Keywords: Maintenance Engineer, Electrical Maintenance Engineer, Multi-Skilled Maintenance Engineer, Electrical Engineer, Mechanical Maintenance Engineer, Production Maintenance, Manufacturing, Packaging, PPM, Planned Preventative Maintenance, Reactive Maintenance, Breakdown Repairs, Fault Finding, NVQ Level 3, 17th Edition, 18th Edition, Site Maintenance, Newmarket, Suffolk, Cambridge, Bury St Edmunds, Ely, Thetford, Peterborough. If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Skilled Mechanical Operatives Location: Clevedon, North Somerset (own transport required) Contract Type: Temporary ongoing Holiday: 25 days + 8 bank holidays (pro rata, accrued) Start Date: Immediate Pay Rates Basic Early Shift (06:00 14:15): £18.26 per hour Basic Late Shift (14:30 00:30): £19.85 per hour Overtime Rates: £27.79 per hour to £31.76 per hour Shift Patterns AM Shift Monday to Thursday: 06:00 14:15 Friday: 06:00 11:30 PM Shift Monday to Wednesday: 14:30 00:30 Thursday: 14:30 00:00 Additional Benefits Overtime available at enhanced rates £250 gift card after successful completion of 4-month probation £500 gift card after 12 months service Overview Pertemps are currently recruiting for Skilled Mechanical Operatives on behalf of Edwards Vacuum based in Clevedon. This role will support the production line by building mechanical abatement systems and pump frames prior to final testing. You will be responsible for assembling cabinets, installing sub-assemblies, and building machines to the correct specification and expected quality standards. Key Responsibilities Mechanical & Assembly Duties Assemble mechanical systems, cabinets, and pump frames Fit sub-assemblies to cabinets or frames Prepare components and cabinets ready for build Read and interpret mechanical drawings and layout diagrams Use P&IDs to support machine builds Carry out basic wiring connections and connect electrical devices where required Perform leak testing and fault finding on assembled units Follow build notes and technical instructions General Operations Responsibilities Work in line with Health, Safety, Environmental, and Quality standards Maintain high standards of workmanship and product quality (Right First Time) Carry out rework, corrections, and modifications when required Work both independently and as part of a team Meet production targets, lead times, and deadlines Maintain 5S standards and a clean, organised work environment Use hand tools and power tools safely Complete all production documentation accurately Identify and report issues with materials, documentation, or assembly Support other production areas when required Skills & Experience Essential Proven experience in mechanical assembly or fitting Ability to read and interpret technical and mechanical drawings Experience using hand and power tools Strong attention to detail and commitment to quality Ability to work to deadlines in a fast-paced environment Good problem-solving skills Desirable Experience working with P&IDs Basic electrical knowledge or wiring experience Experience in testing, fault finding, or leak testing Previous experience in a manufacturing or production environment Additional Benefits Overtime available at enhanced rates £250 gift card after successful completion of 4-month probation £500 gift card after 12 months service Apply Now If youre an experienced mechanical operative or fitter looking for your next opportunity, please apply with your up-to-date CV. TPBN1_UKTJ

Automotive Assembly Technician, North Somerset, £15 - £15.50ph Assembly Technician jobs, Mechanical Assembly Technician jobs, Production Technician jobs, Manufacturing Technician jobs. 4 day working week! Monday to Thursday 7.30am 5.15pm. Part time positions also available. Rapidly growing automotive manufacturing business supplying global automotive vehicle manufacturers. Recently refurbished, modern manufacturing and office facilities. £15 - £15.50ph per hour plus paid overtime, roles are offered on an initial 12-week temporary to permanent contract basis. Are you interested in working at the cutting edge of automotive manufacturing? Do you have a passion for cars and want to be trained to be able to assemble gearboxes and engines for several leading vehicle manufacturers? ? This Automotive Assembly Technician job will involve: Disassembly of automotive gearboxes and engines following instructions using tooling and training. Inspection of a wide range of engine and transmission components. Evaluation of parts against set criteria and drawings. Measurement of features against drawings using various measuring tools. Assembly of engines and transmissions on a production line. Testing of engines and transmissions. ? This Automotive Assembly Technician job will suit: Previous experience in a similar position is not essential as training will be given, but any experience of working within an engineering, manufacturing or automotive / vehicle workshop environment would be beneficial. Above all we are looking for candidates who are reliable & enthusiastic about working within a growing business working on projects with some of the leading manufacturers in the automotive industry. You will be working in a busy production environment, and some tasks can be physical and fast paced. Overtime is available on occasions to boost earnings. ?To apply for this Automotive Assembly Technician please send your CV to Sam Hilton at Euro Projects Recruitment Ltd . Visit the Euro Projects Recruitment website to view our latest permanent, contract, and interim opportunities. Please note that if you have not been contacted within ten days, your application has not been successful on this occasion. Thank you for your interest. TPBN1_UKTJ

An NPI Engineer is sought to join a leading engineering and manufacturing organisation in Fareham, Hampshire, supporting the introduction of new products into production and ensuring successful transfer from design through to full-scale manufacture. The NPI Engineer, Fareham, Hampshire, will be expected to work closely with engineering, manufacturing, quality, supply chain, and project teams to validate new product designs, develop manufacturing processes, and ensure products are production-ready. This role offers the opportunity to be involved in the complete product lifecycle, from prototype builds through to production release. Responsibilities include: • Manage the introduction of new products into manufacturing, ensuring manufacturability issues are identified and resolved. - Support pre-sales and project teams with NRE estimates, tooling requirements, and manufacturing planning. - Develop detailed manufacturing work instructions and build documentation. - Design and implement tooling, fixtures, process FMEAs, and supporting manufacturing documentation. - Participate in design reviews and provide recommendations to improve manufacturability, quality, and cost. - Plan and coordinate prototype, OIB, and pilot builds, ensuring lessons learned are captured and implemented. - Build and test prototype products, identifying issues and recommending corrective actions. - Investigate build and test failures, supporting root cause analysis and continuous improvement activities. - Validate manufacturing processes and ensure products meet quality, performance, and reliability requirements. - Train production personnel on new products, processes, and engineering changes. - Support product transfer into manufacturing, ensuring documentation, validation, and training activities are complete. - Perform electro-mechanical testing, troubleshooting, inspection, and assembly activities. - Maintain NPI laboratory equipment, tooling, and test facilities while ensuring compliance with health and safety standards. Key skills & experience: • Degree, HNC/HND, apprenticeship, or equivalent experience in Electronics, Mechanical Engineering, Manufacturing Engineering, or a related discipline. - Experience supporting New Product Introduction (NPI), manufacturing engineering, or product development activities. - Ability to interpret engineering drawings, schematics, and technical documentation. - Experience developing manufacturing processes, work instructions, and production documentation. - Knowledge of prototype builds, validation testing, and product release processes. - Strong electro-mechanical troubleshooting and problem-solving skills. - Experience supporting root cause investigations and continuous improvement initiatives. - Understanding of manufacturing environments and production readiness requirements. - Excellent communication and stakeholder management skills. - Ability to work effectively across multidisciplinary engineering and production teams. How to apply: Apply now for the NPI Engineer role in Fareham, Hampshire. Send your CV to or call Adam Dighton on 01582 878821.. TPBN1_UKTJ

Injection Moulding Technician. In this role you will set up and run moulding production orders using existing set programs, monitoring quality output throughout the shift. You will be passionate in achieving Right First Time and Just in Time manufacture of plastic components using advanced Moulding techniques, working with and to standard work instructions and practices. Reporting to: Technical Manager. Salary: £16.50 ph Hours: Rotating Shifts 6-2 & 2-10. With cover on nights if required With 4:30am startup on Mondays when covering early shift. This attracts a £3.00ph Night Shift premium. Responsibilities To take responsibility for the setting and conditioning of injection mould tools in order to satisfy production orders. Attending to alarms and faults, employing permanent corrective actions. Ensuring the quality of production, controlling processing parameters against industry standards and in line with the costed requirements of the product. Routine maintenance and fault finding of injection moulding machines. Basic electrical knowledge. Routine maintenance and fault finding of injection moulding tooling. Maintain accurate records of all work undertaken for traceability. To supervise staff on shift to manage break cover etc.only when then Supervisor is not on shift. To be responsible for preparation of auxiliary equipment, jigs, fixtures, and assembly machines to ensure production requirements are met. Carry out quality checks in line with company standards. To utilise and update the electronic production monitoring system (Blackbird). To be able to identify quality problems and carry out first line trouble shooting techniques. Handling material safely and accurately to/ from store locations and machine side. Ensure stock is accurately counted and booked when moved to and from locations using company systems. You will also be trained in the processing and optimisation of new tooling, to support the business growth and Engineering Project Department. To operate safely the forklift truck (*only when fully licenced) Additional responsibilities and requirements as and when necessary. Attend all training programmes required by the company. Requirements You must have at least three years experience as a qualified Injection Moulding Technician. You should have a high level of mechanical aptitude and problem-solving skills together with an innovative outlook. Working knowledge and experience of business systems such as Microsoft Dynamics. IMT Level 2 and IMT Level 3.Qualification. An appreciation of the Lean manufacturing fundamentals. Effective communication and decision-making skills. Strong attention to detail. Have a continuous improvement approach to work. Knowledge of tool trials and process optimisation. Benefits: Company pension On-site parking Generous holiday Bespoke training programme. TPBN1_UKTJ

We are currently looking for a Cost Engineer to join a leading manufacturer of motorcycles based in the UK. This role will play a key part in ensuring accurate product costing, validating supplier quotations and driving continuous cost optimisation across new and existing vehicle programmes. It's an excellent opportunity for an experienced cost specialist with a strong understanding of manufacturing processes and complex vehicle assemblies, who enjoys working cross-functionally within a fast-paced engineering environment. The Cost Engineer will: Prepare should-cost calculations and cost estimates to validate supplier quotations for technology parts and build-to-print components. Support cost negotiations in collaboration with the Purchasing team. Provide target cost estimates and evaluations throughout new product development. Analyse material costs, tooling investments and assembly costs. Set up and maintain foreign exchange and raw-material commodity indexation matrices. Support make-versus-buy assessments, sourcing strategies and supplier negotiations. The Cost Engineer will have: A bachelor's degree in Mechanical, Industrial, Automotive or Manufacturing Engineering, or a Finance qualification (CIMA, ACA, ACCA). Significant experience in cost engineering, product costing or should-costing within an OEM or Tier 1 manufacturing environment. Experience within premium vehicle, automotive, motorcycle, motorsport, aerospace or complex sub-assembly manufacturing. Strong knowledge of manufacturing engineering processes, including machining, die-casting, forging, composites and vehicle assembly operations. Experience assessing tooling costs, manufacturing investments and production cost drivers. The ability to read and interpret engineering drawings, BOMs and technical specifications. This role offers the opportunity to take a key position within a highly respected engineering organisation, influencing cost strategy across innovative and premium vehicle programmes. If this opportunity sounds like a good fit, please apply online with an up-to-date copy of your CV and a member of our team will be in touch. TPBN1_UKTJ

Prototype Technician £30,000 - £40,000 + Bonus + Share Scheme + Monday-Friday + Company Benefits Southampton Are you a hands-on Prototype Technician with experience in electronics, wiring, assembly, or model building? Do you want to work on cutting-edge unmanned vehicle and advanced prototype projects within a growing engineering business at the forefront of innovation? This is an exciting opportunity to join a specialist engineering company developing next-generation prototype systems across maritime and aerospace-inspired applications. Working closely with engineers and designers, you will play a key role in building, testing, and refining experimental products in a highly varied workshop environment. In this role, you will be involved in assembling and wiring prototype systems, operating and maintaining 3D printers, supporting motor and electrical testing activities, and building scaled RC models and development platforms. You will work with a range of materials and manufacturing processes, contributing directly to the development of innovative technologies from concept through to testing. This position would suit a practical and enthusiastic technician who enjoys hands-on engineering, problem-solving, and working on unique projects where no two days are the same. The Role Assemble, wire, solder, and test electrical and electronic prototype systems Operate, maintain, and optimise 3D printing equipment and printed components Support electrical, motor, and system testing activities, recording and reporting results Build and modify scaled RC model aircraft and prototype platforms Work with balsa, plywood, foam, CNC-machined, and laser-cut components Assist with the assembly and setup of test benches and development rigs Support workshop organisation, documentation, and ongoing prototype development activities The Person Experience with wiring, cabling, soldering, and practical electronic or mechanical assembly Hands-on workshop, prototype, manufacturing, or engineering technician experience Experience with RC model building, hobby engineering, or similar practical projects beneficial Familiarity with 3D printing and prototype manufacturing processes Commutable to Southampton Reference: BBBH25591C Keywords: Prototype Technician, Engineering Technician, R&D Technician, Workshop Technician, Test Technician, Build Technician, Prototype Engineer, Electronics Technician, Manufacturing Technician, 3D Printing, Wiring, Cabling, Soldering, Electronics Assembly, Mechanical Assembly, Prototyping, RC Models, Aerospace, Maritime, Southampton TPBN1_UKTJ

Safran is ranked second in the Aerospace & Defense sector in TIME magazine's ''World's Best Companies 2025'' ranking. Safran's an international high-technology group operating in the fields of aerospace (propulsion, equipment and interiors), space and defense. Its mission is to contribute sustainably to a safer world, where air transport becomes ever more environmentally friendly, comfortable and accessible. Join our team! Our Industrialisation Department is responsible for the development and introduction of exciting new and updated products into production on time, to cost and to a high quality standard. This is brilliant opportunity for you to join Safran as a Manufacturing Engineer where you'll harness your knowledge and understanding of the new product introduction process and work at an advanced beginner/competent level. As Manufacturing Engineer you will be responsible for complex projects & will work closely with other functions like design engineering to ensure the product designs meet manufacturing and assembly requirements. As well as... • Participate in design reviews for new product introduction process - Evaluate new product designs using 3D CAD model and mock-ups and log issues - Co-ordinate design for assembly/manufacture reviews - Ensure development mock-ups are built to schedule. - Make improvement suggestions and validate solutions - Work with the purchasing and design departments - Calculate production capacity requirements based on customers' demand an - Estimate build times and required number of stations for new production processes and carry out line balancing of operations - Produce APQP & PPAP documentation - process flow, PFMEA, control plan, work instructions, MSA & capability studies - Prepare and lead PFMEA reviews. - Perform validation and verification of product design to satisfy customers quality and performance expectations - Support the programme team in the delivery of industrialisation milestones (PDR, CDR, Test builds, PTR and PPAP) - Check accuracy of BOM against build requirements - Participate in and contribute to route cause analysis sessions - Communicate tasks on a critical path to programme team Take your career to new hights You'll be... - B.Eng. in Mechanical, Manufacturing or Aerospace Engineering OR HND gained through an apprenticeship - HNC in Mechanical, Manufacturing or Aerospace Engineering - apprenticeship - Min 2 years of experience in an aerospace or automotive manufacturing environment - Knowledge of design for manufacture and assembly principles - Knowledge of manufacturing processes - Experience of 3D CAD modelling software - Interpret 2D drawings - Expwerience of working in company and regulatory processes - Expeirence of CATIA 3D CAD modelling software - Understanding of aircraft certification process wpould be a nice add TPBN1_UKTJ

CAD Draughtsperson (Conveyor Belts) £45,000 - £55,000 + Progression + Training + Early Finish Friday + Overtime Availability + Company Benefits Halifax Are you an experienced CAD Draughtsperson looking to join a specialist engineering business where you can work on bespoke material handling and conveyor solutions from concept through to manufacture? Do you enjoy creating detailed technical drawings, collaborating with engineers and supporting the successful delivery of innovative engineering projects? The company are a well-established engineering company based in Halifax, specialising in the design, manufacture, installation and maintenance of conveyor systems and material handling solutions for customers across a wide range of industries. This is an excellent opportunity to join a highly skilled team where your designs will directly contribute to the successful delivery of projects from initial concept through to production. The Role: Produce accurate 2D and 3D CAD drawings and technical models Create detailed manufacturing, assembly and installation drawings Develop schematics and technical documentation to project specifications Work closely with engineers, project managers and production teams Interpret customer requirements and translate them into practical design solutions Revise and update drawings throughout project lifecycles The Person: Experience in conveyor manufacturing Proficient in AutoCAD and Autodesk Inventor Job reference: BBBH25928a Keywords: CAD Designer, CAD Technician, Design Engineer, Mechanical Designer, Technical Designer, AutoCAD, Inventor, Engineering Drawings, Manufacturing Drawings, Production Drawings, Assembly Drawings, Conveyor Systems, Material Handling, Automation Equipment, Industrial Equipment, Halifax, West Yorkshire We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website. TPBN1_UKTJ

Quality Engineer (ISO 9001) £35,000-£40,000 + Progression + Training + Company Bonus + Employee Owned Company + Early Finish Friday + Company Benefits Sutton Coldfield Are you a Quality Engineer or similar with experience working to ISO9001 looking for an autonomous role within a long established, tight-knit Manufacturer who are part of a leading Agricultural group offering a dynamic workload and the chance to continually upskill yourself and progress your career? This well-established and growing manufacturer of Agricultural products are part of a leading group of companies with a presence across multiple continents. They have seen continual success since their establishment and due to an internal prometon across the group are looking for a new Quality Engineer to join their friendly team. In this varied role you will be the go-to person for all Quality processes within the business, ensuring ongoing compliance to ISO 9001 and carrying out quality inspections and audits both internally and externally. You will also be responsible for making sure documentation is up to date and will work closely with the manufacturing and production teams to ensure ongoing efficiency and to propose future strategy for development of quality systems. This role would suit a Quality Engineer with experience working to ISO 9001 looking for an autonomous role within a tight-knit, well-established business who are part of a global group who offer ongoing progression and specialist training. The Role: Carry out Quality inspections and audits on products, parts and finished products Ensure ongoing compliance to ISO 9001 Work closely with production and manufacturing teams Liaise with Production Manager and have the autonomy to oversee Quality strategy within the business Monday - Friday days based, finished 12.30 on a Friday The Person: Quality Engineer Experience working to ISO9001 Commutable to Sutton Coldfield Quality, Engineer, Manufacturing, ISO9001, Assembly, Engineering, Production, QC, QA Agricultural, West Midlands, Birmingham, Sutton Coldfield, Walsall, Wolverhampton Reference Number: BBBH26387 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Manufacturing Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables. The successful Manufacturing Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse. Key Responsibilities of the Manufacturing Engineer will include: Provide manufacturing engineering support to production and assembly teams, ensuring quality, safety, and delivery targets are met. Act as the key link between Engineering and Manufacturing, providing clear technical guidance to production teams. Support design reviews and manufacturability assessments to achieve efficient, right-first-time production. Lead PFMEA activities, process mapping, and risk reduction initiatives to improve manufacturing performance. Maintain manufacturing documentation, including drawings, work orders, routings, and technical packs. Design tooling, fixtures, and manufacturing methods while ensuring compliance with safety and quality standards. * Collaborate with internal teams and suppliers to drive continuous improvement, quality, and process efficiency. For the Manufacturing Engineer role, we are keen to receive CV's from candidates who possess: Proven experience in manufacturing engineering, with a strong understanding of machining and assembly processes. Ability to interpret technical drawings, create manufacturing documentation, and apply GD&T principles. Experience of CNC programming, process development, and continuous improvement within a manufacturing environment. Proficiency in engineering systems and software, including SAP and 2D/3D CAD packages. * Strong metrology and inspection skills, with experience using precision measurement equipment to verify component and assembly accuracy. Salary & Benefits: Competitive salary of up to £50,000, based on skills and experience Standard Monday to Friday working pattern 37.5-hour working week Generous holiday allowance of 25 days plus Bank Holidays Employer pension contributions of up to 8% Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role. To apply for the Manufacturing Engineer role, please click 'Apply Now' and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information. TPBN1_UKTJ

Pay:£37,500.00-£39,000.00 per year Job Description: Proactive Personnel Ltd are recruiting on behalf of our client for an experienced Electrical Supervisor within a busy manufacturing environment. As an Electrical Supervisor this is an excellent opportunity for a hands-on leader with a strong electrical background to oversee production activities, drive team performance, and ensure projects are delivered safely, efficiently, and to the highest quality standards. The Role: Reporting directly to the Manufacturing Manager, you will be responsible for supervising a team of electrical panel wirers and fitters, ensuring production targets are achieved while maintaining quality, safety, and operational excellence. Key Responsibilities: • Key responsibilities of the Electrical Supervisors are Leading, supporting and motivating a team of electrical assembly technicians, panel builders, and fitters. - Take ownership of allocated projects from planning through to successful completion. - Ensure all testing and inspection procedures are completed accurately and documented before products are released for final assembly. - Organise and prioritise daily workloads to meet project milestones and production schedules. - Provide regular progress updates to the Manufacturing Manager on project status and team performance. - Work closely with other departments to ensure effective communication and smooth project delivery. - Promote a culture of continuous improvement by identifying opportunities to enhance processes, efficiency, and quality standards. - Ensure compliance with all Health & Safety policies, risk assessments, and PPE requirements. - Support employee development through mentoring, coaching, performance management, and involvement in disciplinary procedures when required. - Follow and uphold all company policies, procedures, and operational standards. Essential Skills & Experience: • Minimum of three years' experience in a Electrical Supervisory or Leadership role within a manufacturing, engineering, automation, or equipment-build environment. - Strong understanding of electrical control systems and the ability to interpret electrical schematics and drawings. - Previous hands-on experience in electrical fitting, panel wiring, or machine assembly. - Technically minded, with knowledge of inverter parameter configuration or a willingness to develop these skills. - Proven ability to manage projects, solve problems, and work effectively within a fast-paced manufacturing environment. - Experience coordinating teams to achieve production deadlines and quality objectives. Qualifications: • HNC (or equivalent qualification) in an Electrical Engineering discipline. Personal Attributes: • Strong leadership skills with the ability to motivate and develop a high-performing team. - Excellent communication and interpersonal skills. - Proactive approach to learning, development, and continuous improvement. - Ability to take ownership, responsibility, and accountability for results. - Organised, driven, and committed to delivering high standards of work. Benefits: • Company pension - Free parking - On-site parking Education: • Certificate of Higher Education (required) Experience: • Panel Wiring: 5 years (preferred) - Supervising: 5 years (preferred) - If you are an Experienced Electrical Supervisor, looking for a new challenge, we'd like to hear from you. TPBN1_UKTJ

Cell Leader - Precision Engineering Are you a hands-on leader from a machine shop environment who thrives on driving performance, leading teams, and making a real impact on the shop floor? We're working with a highly respected engineering organisation that is investing in its manufacturing capability and looking for a Assembly Supervisor to lead a skilled team. This is a rare opportunity to step into a well-established, high-performing environment where your leadership will directly influence output, quality, and team success. What makes this role stand out? Real leadership responsibility - Lead, coach and develop a team of 20+ skilled technicians, giving you the opportunity to shape performance, culture and future talent. Drive continuous improvement Step into a visible leadership role - Work closely with senior manufacturing leaders, influencing operational performance, developing people and helping deliver critical programmes to customers around the world. Join a stable, experienced, and collaborative team Work in a precision engineering environment with high standards and real purpose The Role: You'll be leading a team within the Sub-Assembly divison, ensuring smooth day-to-day operations while driving performance, quality, and continuous improvement. Key responsibilities include: Supervising and motivating a skilled team of machinists Ensuring production targets and quality standards are met Driving efficiency, productivity, and best practice on shift Acting as the key point of contact for operational issues Supporting a culture of safety, accountability, and teamwork What we're looking for: Proven supervisory or team leadership experience Background in a machine shop or precision engineering environment Strong understanding of machining processes and shop floor operations A proactive, hands-on leadership style Someone who can engage, motivate, and develop a team Why consider this? This isn't just another supervisory role - it's a chance to step into a position where: Your leadership genuinely matters You'll be part of a highly regarded engineering operation You get structure, stability, and long-term career potential And importantly a shift pattern that gives you real time back If you're open to hearing more apply now! TPBN1_UKTJ

Electronics Assembly Person Job Description To assemble, solder and wire all PCB assemblies and units to IPC-JSTD-001 and relevant modules, To ensure inbuilt quality by following routers and inspecting own workmanship, To interpret and apply all drawings, instructions and documentation related to the manufacturing of electronic products, To conformal coat and apply adhesives to product as specified in manufacturing drawings, To proactively assist the Production Supervisor to ensure the smooth running of the department and raise any issues in a timely manner, To undergo training to remain IPC certified, To assist colleagues where required, To have a keen eye for detail and look for opportunities for continuous improvement; working to best practice, To carry out duties in a proper and efficient manner, act wholeheartedly in the interest of the Company at all times and to comply with the Company Rules and Regulations, Responsible for ensuring that a high standard of housekeeping is maintained, Responsible for ensuring that all Health & Safety Policies are adhered to, To carry out any other tasks where reasonable and relevant, when required. Requirements Ability to work independently while collaborating in a team environment Ability to work under pressure and to deadlines Team Player Strong Work Can-do Ethic Exceptional at building relationships Excellent Customer Service skills Strong attention to detail and time management Exceptional Planning and Organisation skills High awareness of Productivity and Quality Excellent Communication skills Flexibility Takes Responsibility for actions Learn, Apply and Improve Benefits Health Care Cash Plan Employee Assistance Programme Contributory Pension Scheme for eligible employees (6% increasing to 7%) Enhanced holiday (24 days holiday in addition to UK bank and public holidays) Life Assurance Company Sick Pay Scheme* Flexitime Early finish on Fridays Sports and Social Club Free car parking Free access to a local gym Onsite café (Available after 1 yearofservice) (* Based in Rochford / Southend on Sea) The organisation treats personal data collected during the recruitment process in accordance with its Data Protection Policy. Information about how your data is used and the basis for processing your data is provided in the organisations Job Applicant Privacy Notice, which is located on our company website. TPBN1_UKTJ

Materials Technician (Maternity Cover contract) Location: Totnes Pay Rate: Circa £14.00 per hour Contract: Temporary We are looking for a hands-on Materials Technician to join our team at our Totnes site on a temporary basis. This role has been created to provide additional support within our Stores function during a period of maternity leave cover. This is not a management position we're looking for someone who enjoys rolling up their sleeves, working as part of a busy operations team, and ensuring materials, stock, and components are available where and when they're needed. The Role As a Materials Technician, you will play a key role in supporting manufacturing operations by maintaining accurate stock control, kitting parts for production, processing incoming goods, and assisting with general stores and operational activities. Your work will help ensure customer orders are delivered on time and to the highest quality standards. Key Responsibilities Kit contracts and works orders accurately and efficiently to meet production schedules. Monitor stock levels while kitting and report any discrepancies immediately. Maintain accurate stock records and ensure full traceability of parts and materials. Process and issue consumables and "over-the-counter" parts required by production teams. Receive, process, and book in incoming parts and components. Support the Product Assembly Department with the movement and preparation of instrument transit cases. Assist in the delivery of finished products to Goods Out. Ensure all build, tracking, and stock information is completed accurately and on time. Take ownership of assigned tasks and ensure deadlines and quality standards are met. Help identify and resolve issues relating to materials, quality, and timescales. Maintain high standards of housekeeping, ESD protection, and workplace organisation. Ensure safe storage and handling of chemicals and full compliance with COSHH requirements. Work safely at all times and adhere to company Health & Safety procedures. About You We're looking for someone who: Has experience within a stores, warehouse, materials, stock control, or manufacturing environment. Is highly organised with strong attention to detail. Can work independently and as part of a team. Is comfortable using stock control systems and maintaining accurate records. Takes pride in delivering high-quality work and meeting deadlines. Has a proactive and flexible approach to supporting operational activities. Understands the importance of health and safety in a manufacturing environment. What's On Offer? Temporary opportunity with an established manufacturing business. Competitive pay of circa £14.00 per hour . Friendly and supportive team environment. An opportunity to gain experience across Stores and Operations functions. If you're a practical, detail-focused individual who enjoys working in a fast-paced manufacturing environment, we'd love to hear from you. INDENG TPBN1_UKTJ

Bench Operative Location: Chesterfield Starting Salary: £13.25p/h Hours: Shifts, Days (Full time Monday to Friday) Contract: 12 weeks temp to perm position Reporting to: Operations Manager Generation People is currently hiring for a Bench Operative to join a manufacturing company based in the Chesterfield area. This role is suited to someone who has passion and commitment to produce high quality wooden products with a high level of accuracy and attention to detail. Key Duties as the bench operative: Produce high quality, accurate and timely work to meet client demands and tight deadlines. Assembly work Use of hand tools and power tools Proactive team player and committed to continuous improvement. Manual handling and transportation of products around the warehouse Candidate Skills & Requirements: FLT Counterbalance licence advantageous Minimum 1 years experience in joinery or bench assembly advantageous Assembly experience Use of hand tools and power tools Experience of working with and around wooden products Reliable and punctual Great attention to detail TPBN1_UKTJ

Job Title: Mechanical / Electrical Fitters, Assembly Engineers & Test Engineers Location: Mirfield Salary: Competitive Job Type: Permanent, Full Time About us: Are you an experienced engineer, fitter, or technician looking for an opportunity to develop your career with an innovative and growing specialist manufacturer? We are looking to recruit Mechanical / Electrical Fitters, Assembly Engineers, and Test Engineers to join our expanding team. These roles offer excellent opportunities for ambitious individuals who enjoy hands-on engineering, problem solving, working on bespoke equipment, and being part of a skilled and supportive team. You will be joining an established and secure business that designs and manufactures specialist engineered products for customers across the UK and overseas. Depending on your skills and experience, you may be involved in mechanical assembly, electrical fitting, equipment build, testing, commissioning, installation, or service support. We offer an attractive starting salary, a comprehensive benefits package, and opportunities for further training and career progression. About the role: Depending on the position, responsibilities may include: Mechanical assembly of specialist equipment, working independently or as part of a project team Electrical fitting, wiring, and connection of equipment and control systems Assembly of bespoke manufactured products to drawings, specifications, and quality standards Testing equipment during and after assembly to ensure it meets the required performance and safety requirements Carrying out functional checks, fault finding, and basic diagnostics Setting up and commissioning equipment in-house before dispatch Supporting installation, commissioning, servicing, and troubleshooting works at customer sites Working with pneumatic systems, including setup, operation, and fault finding Interpreting engineering drawings, wiring diagrams, technical documents, Siemens PLC systems, and touch screen controls Supporting continuous improvement in build quality, testing processes, and project delivery Travelling to customer sites in the UK and overseas where required About you: The ideal candidates will have one or more of the following: Experience in an equipment manufacturing, machinery build, fabrication, electrical, mechanical, or engineering environment Mechanical assembly, fitting, electrical fitting, wiring, testing, or commissioning experience The ability to read and interpret engineering drawings, wiring diagrams, or technical documentation Experience working with pneumatic systems would be beneficial Exposure to PLC-controlled equipment, Siemens PLCs, touch screens, or automated machinery would be advantageous Strong attention to detail and a focus on quality Good communication skills, both written and verbal Strong time management skills and the ability to manage multiple tasks A proactive approach to learning and self-development The ability to work well independently and as part of a team A willingness to travel where required, including overseas for certain projects Why Join Us? Join an established, secure, and growing specialist manufacturer Work on varied, bespoke engineering projects Be part of a skilled and expanding team Gain exposure to multi-process manufacturing and specialist engineered equipment Develop your skills through hands-on experience and further training Opportunities to work on customer sites in the UK and internationally Long-term career progression as the company continues to grow Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Mechanical Fitter, Electrical Fitter, Assembly Engineer, Test Engineer, Commissioning Engineer, Machine Build Technician, Electro-Mechanical Assembler, Field Service Engineer, Systems Technician, PLC Technician, Pneumatics Engineer, Wireman, Machinery Installation, Bespoke Engineering, Build & Test also be considered for this role. TPBN1_UKTJ

Multi-Skilled Maintenance Engineer Panama Days & Nights £46400 A leading UK manufacturing business is looking to recruit a Multi-Skilled Maintenance Engineer to join its engineering team at a high-volume production facility. This is an excellent opportunity for either mechanically or electrically biased engineers, provided you are comfortable working on electrical systems and fault finding within a modern automated manufacturing environment. The Role Working on a Panama shift pattern covering days and nights, you will be responsible for: Planned preventative maintenance (PPM) Reactive breakdown support Electrical and mechanical fault finding Continuous improvement activities Supporting production to maximise equipment uptime Root cause analysis and reliability improvements Working on automated production and packaging equipment Equipment & Machinery You willbe working on a wide range of manufacturing and packaging machinery, including: High-speed automated production lines Conveyors and material handling systems Pneumatic and hydraulic equipment PLC-controlled machinery Vision inspection systems Industrial drives and motors Automated assembly equipment Packaging and process machinery Requirements Apprenticeship, NVQ Level 3, HNC/HND or equivalent in Engineering Multi-skilled maintenance background Comfortable with electrical fault finding Experience within manufacturing, FMCG, packaging, food, beverage, pharmaceutical or similar environments Ability to work independently and as part of a team Benefits Competitive salary Panama days and nights shift pattern Overtime available at 1.5x hourly rate Company pension scheme Life assurance Employee assistance programme Training and development opportunities Stable long-term employment with a well-established manufacturer Additional company benefits package To discuss this role, or other Maintenance Engineer opportunities, contact Logan Sly at Stirling warrington on 07754 554197 INDSW TPBN1_UKTJ

An exciting opportunity has arisen for an experienced Mechanical Fitter to join a well-established and growing engineering business specialising in the design and build of special-purpose machinery and automation equipment for customers across the globe. This is a varied, hands-on role within a close-knit engineering team, ideal for someone with experience in machine build, mechanical assembly and workshop-based engineering support who enjoys working on bespoke equipment from build through to test and installation support. The Role As Mechanical Fitter, you will play a key role in the build and support of bespoke special-purpose machines and automated equipment. The role will involve a mixture of fitting, assembly, machine rectification, testing support and occasional customer/supplier interaction, both in the UK and overseas. Key responsibilities will include: Mechanical fitting and assembly of special-purpose machines and automation equipment Supporting machine build, testing and commissioning activities Carrying out rectification work and small machining tasks using manual workshop equipment including milling, turning, drilling and grinding machinery Assisting with machine improvements and engineering problem-solving activities Working with pneumatic and hydraulic systems at a basic/intermediate level Supporting visits and liaison with customers, suppliers and subcontractors where required Contributing to the continuous improvement of internal engineering procedures and systems About You To be successful in this role, you will ideally have: At least 3 years experience in an engineering / manufacturing environment Previous experience building or assembling special-purpose machinery, automation equipment or bespoke mechanical systems Good hands-on mechanical fitting and workshop skills Basic understanding of pneumatic and hydraulic systems A tidy, organised and proactive approach to work Willingness to travel overseas occasionally for short periods if required An engineering qualification such as ONC / HNC / apprenticeship / equivalent would be advantageous A full driving licence would be beneficial Whats on Offer Competitive salary dependent on experience Paid overtime Profit-related bonus / share scheme Generous employer pension contribution Overseas travel allowances Free EV charging Flexible working arrangements Excellent holiday allowance Opportunity to join a growing specialist engineering business with a strong reputation in bespoke machine design and build This is a great opportunity for a practical and motivated Mechanical Fitter looking to join a highly skilled team working on interesting, technically varied projects in a specialist machinery environment. If this role would be of interest, please apply today. TPBN1_UKTJ

CAD Draughtsperson (Material Handling OEM) £45,000 - £55,000 + Progression + Training + Early Finish Friday + Overtime Availability + Company Benefits Halifax Are you an experienced CAD professional looking to join a specialist engineering business where you can work on bespoke material handling and conveyor solutions from concept through to manufacture? Do you enjoy creating detailed technical drawings, collaborating with engineers and supporting the successful delivery of innovative engineering projects? The company are a well-established engineering company based in Halifax, specialising in the design, manufacture, installation and maintenance of conveyor systems and material handling solutions for customers across a wide range of industries. This is an excellent opportunity to join a highly skilled team where your designs will directly contribute to the successful delivery of projects from initial concept through to production. The Role: Produce accurate 2D and 3D CAD drawings and technical models Create detailed manufacturing, assembly and installation drawings Develop schematics and technical documentation to project specifications Work closely with engineers, project managers and production teams Interpret customer requirements and translate them into practical design solutions Revise and update drawings throughout project lifecycles The Person: Knowledge of material handling equipment Experienced in AutoCAD and Autodesk Inventor Job reference: BBBH25928c Keywords: CAD Designer, CAD Technician, Design Engineer, Mechanical Designer, Technical Designer, AutoCAD, Inventor, Engineering Drawings, Manufacturing Drawings, Production Drawings, Assembly Drawings, Conveyor Systems, Material Handling, Automation Equipment, Industrial Equipment, Halifax, West Yorkshire We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website. TPBN1_UKTJ

Contek Recruitment Solutions are recruiting for a Mechanical Assembly Operatives on behalf of our client, a well-established and fast-growing engineering and manufacturing business based in Aylesbury . Our client operates at the forefront of technology and is known for producing high-quality engineered products within a supportive, team-focused environment. The Role This is an excellent opportunity for an organised and motivated individual with a manufacturing background to join our clients Production team. The role is hands-on and based within a busy production environment, with a strong focus on mechanical assembly, including the build and assembly of heat exchanger units and associated thermal equipment . Reporting Line & Team You will be part of the Production team and will report directly to the Team Leader. You will work closely with engineers, supervisors, project managers, and fellow production operatives, with full support provided across the business. Shift Patterns & Working Hours The role is offered on either an Early Shift or a Late Shift : Early Shift Your normal hours of work will be 37 per week - Monday to Friday: 6am to 2pm. Late Shift Monday to Thursday: 1:30pm 11:30pm, Friday: 1:30pm 11:00pm This shift attracts a 15% shift allowance Requirements A minimum of 2 years experience within a manufacturing or mechanical assembly environment Previous experience in mechanical fitting, assembly, or production-based roles is highly desirable Essential Attributes To succeed in this role, candidates should demonstrate: A strong work ethic and a positive, reliable attitude Excellent attention to detail and a commitment to quality The ability to solve problems, work under pressure, and prioritise workload effectively The ability to work independently using initiative, while also contributing as part of a team Key Skills Required Ability to read and interpret engineering drawings, primarily Third Angle Projection drawings Competence in the use of hand tools, power tools, and measuring equipment A methodical, safety-conscious approach to mechanical assembly Key Responsibilities Assembly of heat exchanger units and related thermal products in line with engineering drawings and specifications Mechanical fitting and assembly of components, sub-assemblies, and finished products Accurately reading and interpreting engineering drawings and build instructions Carrying out fitting and assembly work as directed by the Team Leader Following work instructions provided by engineers, project managers, and supervisors Ensuring assemblies meet required quality standards and tolerances Participating in quality checks and inspection processes Identifying and reporting any build issues, defects, or improvement opportunities Supporting continuous improvement initiatives within the production area Maintaining high levels of productivity while ensuring accuracy and safety Carrying out production duties as directed by the Team Leader Assisting in other production areas or duties as required Working safely with production plant, machinery, and equipment General Duties Acting in the best interests of the company at all times Maintaining strict confidentiality regarding company information Ensuring all company procedures and standards are followed Maintaining good housekeeping within the work area Complying fully with all Health & Safety policies and procedures Training & Support Training and development requirements will be identified and agreed in consultation with the Team Leader, with ongoing support provided to help the successful candidate succeed and develop within the business. Benefits Package 25 days holiday plus bank holidays Life assurance Pension scheme Health cash plan On-site parking On-site electric vehicle charging points Social events Seasonal flu jabs TPBN1_UKTJ

Supplier Quality Engineer (Automotive) Bolton 12-Month Fixed Term Contract Days Role £42,000 + Bonus About the Opportunity An exciting opportunity has arisen for a Supplier Quality Engineer to join a global automotive technology manufacturer at its Bolton facility on a 12-month fixed-term contract. This is an excellent opportunity for an experienced quality professional to influence supplier performance, support new product launches and drive continuous improvement across a global supply chain. Key Responsibilities - Supplier Quality Engineer Support the approval and qualification of new suppliers through management system and process audits. Manage supplier activities throughout New Product Introduction (NPI), ensuring project deadlines are achieved. Lead Supplier APQP and PPAP approval activities. Conduct ongoing supplier audits and assessments to maintain supplier approval status. Develop suppliers through training, coaching and deployment of quality standards. Carry out supplier visits for audits, development projects and corrective action reviews. Act as the primary quality interface between suppliers and the business. Monitor and report supplier quality KPIs, driving improvements in supplier performance. Lead supplier corrective and preventive action activities. Manage quality-related aspects of supplier change control processes. Investigate and manage supplier non-conformances and rejection issues. Experience/Qualifications - Supplier Quality Engineer HNC/HND qualified in Mechanical, Electrical or Manufacturing Engineering. Qualified IATF 16949 and/or VDA 6.3 Auditor. Minimum 3 years' experience in a Supplier Quality or Quality Engineering role. Automotive experience preferred, although backgrounds in electronics, mechanical manufacturing or high-volume assembly environments will also be considered. Strong understanding of APQP, PPAP, FMEA, Control Plans, SPC, R&R and supplier development methodologies. Experience conducting supplier audits and managing supplier improvement projects. Strong communication and stakeholder management skills. Comfortable travelling to supplier sites when required. Proven ability to manage multiple projects and deadlines simultaneously. Benefits - Supplier Quality Engineer Discretionary Annual Bonus (7.5%) Up to 5.5% Employer Pension Contribution Electric Vehicle Scheme via Salary Sacrifice Free EV Charging On Site Private Medical Insurance Death in Service Cover (4x Annual Salary) For more information on this role, please contact Ben Dawson on 01453 829522, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include : Supplier Quality Engineer, Supplier Development Engineer, Supplier Quality Assurance Engineer, SQA Engineer, Quality Engineer, Senior Quality Engineer, APQP Engineer, Manufacturing Quality Engineer, Supplier Development Specialist, Vendor Quality Engineer, Supplier Performance Engineer, Supplier Audit Engineer, Quality Systems Engineer, NPI Quality Engineer, Automotive Quality Engineer. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. TPBN1_UKTJ

Senior Quality Engineer Location: North West England Industry: Aerospace Manufacturing About the Role We are seeking an experienced Senior Quality Engineer to join a leading aerospace manufacturing business. This is an excellent opportunity for a quality professional with a strong aerospace background to play a key leadership role within a fast-paced sheet metal and assembly environment. As part of the management team, you will lead a team of Quality Engineers, driving quality performance, continuous improvement, and compliance across the business. You will be responsible for ensuring quality standards are maintained while supporting operational efficiency and customer satisfaction. The successful candidate will demonstrate strong leadership, sound technical knowledge, excellent decision-making skills, and the ability to manage changing priorities in a dynamic manufacturing environment. Key Responsibilities Leadership Lead, mentor and develop the Quality Engineering team. Allocate workloads and manage team priorities to meet business requirements. Represent the Quality function at internal and external meetings. Promote a positive, collaborative, and high-performing team culture. Support the ongoing development of team capability through coaching and training. Quality Maintain a thorough understanding of aerospace quality standards and integrated management systems. Ensure compliance with internal procedures, customer requirements, and industry regulations. Drive proactive quality improvement initiatives to reduce defects and improve performance. Support non-conformance investigations and corrective actions. Participate in Material Review Board (MRB) activities when required. Lead regular quality performance reviews and ensure accurate reporting of key quality metrics. Continuous Improvement Lead and support continuous improvement initiatives across the business. Analyse quality data to identify trends and improvement opportunities. Support root cause analysis and implementation of effective corrective and preventive actions. Promote best practice and a culture of operational excellence. Health & Safety Promote a strong safety-first culture throughout the department. Ensure compliance with health and safety legislation and company procedures. Identify and report unsafe practices and recommend improvements. Lead by example in maintaining safe working standards. Operational Support Work closely with production and operational teams to ensure customer requirements are achieved. Support planning activities by ensuring adequate quality engineering resource is available. Contribute to achieving delivery, quality and cost objectives. Develop an understanding of manufacturing systems to support quality and cost improvement initiatives. Environmental & Workplace Standards Support compliance with environmental management standards, including ISO 14001. Identify opportunities to reduce waste and improve sustainability. Maintain high workplace organisation standards through 5S principles. Ensure company policies and procedures are consistently applied. About You You will have: Proven experience in a Senior Quality Engineer or Quality Engineering leadership role. Previous experience within the aerospace manufacturing sector. Strong knowledge of aerospace quality standards, quality management systems, and continuous improvement methodologies. Experience leading investigations into quality issues and implementing corrective actions. Excellent leadership, communication and organisational skills. Strong analytical and problem-solving ability. A proactive approach with the confidence to make informed decisions. Good IT skills and experience using manufacturing or ERP/MRP systems. A flexible, hands-on approach within a fast-paced manufacturing environment. What's on Offer Competitive salary. Generous annual leave entitlement. Comprehensive employee benefits package, including retail discounts. Free on-site parking. Discounted gym membership. Cycle to Work scheme. Ongoing training and professional development. Excellent career progression opportunities within a growing aerospace manufacturing business. TPBN1_UKTJ

Our engineering clients based close to Fareham have an exciting opportunity for a NPI Engineer to join their growing team. The NPI Engineer will be responsible for the mechanical, electronic and support aspects of validating and introducing new product developments into manufacturing and the supply chain. This includes creating and maintaining accurate work instructions for the production line to ensure consistency of product, developing, building and testing prototype units and evaluating and debugging the design. The role is of a technical nature but cant be completed without cross-functional support so maintaining excellent relationships with these teams is essential. NPI Development: Manage the introduction of new products into production, ensuring manufacturability issues are identified and resolved before full-rate production begins, and reducing risk from design oversights. Support the development of non-recurring engineering (NRE) estimates, including participation in pre-sales design activities to agree the NPI approach and estimate effort, tooling, test equipment and other project costs. Prepare NPI build plans for OIB / pilot builds, including agreed roles, responsibilities, schedule and required resources. Develop detailed work instructions, using build photos and build learning from initial assemblies, to standardise manufacturing methods for new products and engineering changes. Design and develop tooling, fixtures, process FMEAs and supporting documentation in line with project requirements. Participate in design reviews and make practical recommendations to improve manufacturability, simplify assembly and reduce overall cost. Prototyping & Assessment Build new products and prototypes with minimal or no prior instruction, in line with customer specifications and quality standards. Work collaboratively with design and production teams to document, build and verify prototype parts, and train manufacturing operators where required. Analyse build and test failures, recommend corrective actions, and assess associated cost, timing and technical risks. Track, record and report bugs, nonconformances and issues identified during prototype, test and NPI builds. Highlight NPI and product risks to the Project Manager and Project Engineers in a timely and structured way. Recommend design or process modifications based on prototype build and test results. Support root cause investigation and feedback of issues into design, quality and production control processes. Required Skills & Responsibilities: Knowledge in electro-mechanical assembly and product build environments. Technically minded, with practical experience supporting prototype, NPI, and production activities. Able to build, test, and debug products in line with customer and quality requirements. Experience producing documentation and work instructions Exposure to Design for manufacture Working hours: 37.5 hours Monday Friday TPBN1_UKTJ

Quality Engineer West Yorkshire | Defence Engineering | Permanent About the Opportunity Our client is a leading engineering and manufacturing organisation operating within the defence sector, supporting a range of critical naval and land-based programmes. As part of continued growth, they are looking to recruit two Quality Engineers to join their expanding Quality team in West Yorkshire. This is an excellent opportunity to join a highly respected engineering business where quality plays a key role in ensuring the successful delivery of complex, safety-critical products. The Role This position would suit a Quality Engineer who enjoys being close to manufacturing, solving technical problems and driving continuous improvement within a highly regulated engineering environment. Reporting to the Lead Quality Engineer, youll work closely with production, engineering, suppliers and customers to ensure products meet quality, contractual and regulatory requirements throughout the manufacturing lifecycle. Youll play a key role in supporting quality assurance activities, investigating non-conformances, conducting audits, reviewing technical documentation and driving improvements across manufacturing and supply chain operations. What You'll Be Doing Quality Assurance & Governance Support the maintenance and continuous improvement of the ISO9001 Quality Management System Ensure compliance with customer, defence and regulatory requirements Provide quality support across multiple engineering and manufacturing projects Participate in quality governance and compliance activities Auditing & Compliance Plan and conduct internal quality audits Support external customer and certification audits Ensure compliance with relevant industry and defence standards Assist with the development and improvement of quality processes and procedures Problem Solving & Continuous Improvement Lead and support root cause investigations using recognised methodologies such as: 8D 5 Why Ishikawa Manage NCRs, supplier defects and corrective actions Drive continuous improvement initiatives across manufacturing and supply chain activities Analyse quality data and identify opportunities for improvement Product & Process Quality Conduct inspection and verification activities using appropriate measurement techniques Review engineering drawings, specifications and quality documentation Support FAIRs, inspection plans, certification packs and quality records Ensure product conformity throughout manufacture and assembly Stakeholder Management Act as a quality focal point for allocated projects and value streams Work closely with production, engineering, customers and suppliers Support project teams in delivering quality, cost and delivery objectives What We're Looking For Essential Experience working within a Quality Engineering, Quality Assurance or Quality Control environment Experience of ISO9001 Quality Management Systems Strong Root Cause Analysis and problem-solving experience Experience managing non-conformances and corrective actions Ability to read and interpret detailed engineering drawings Strong understanding of GD&T (Geometric Dimensioning & Tolerancing) Experience working within a manufacturing or engineering environment Strong communication and stakeholder management skills Desirable Internal Auditor or Lead Auditor qualification Experience within defence, aerospace, nuclear, marine or other highly regulated industries Knowledge of AQAP, DEFSTAN or similar standards Experience with SAP or similar ERP systems HNC/HND in Mechanical Engineering or similar discipline Ideal Backgrounds We would be particularly interested in hearing from candidates currently working as: Quality Engineer Manufacturing Quality Engineer Supplier Quality Engineer Quality Assurance Engineer Product Quality Engineer Senior Quality Inspector Quality Systems Engineer within defence, aerospace, nuclear, marine, heavy engineering, precision machining or other regulated manufacturing environments. Salary & Benefits Competitive salary depending on experience 33 days holiday including bank holidays Flexi-time scheme with the opportunity to accrue up to 12 additional days leave per year Pension scheme with up to 8% employer contribution Death in Service cover up to 5x basic salary Healthcare Cash Plan Long-term career development opportunities Exposure to high-profile defence programmes Additional Information Due to the nature of the work, applicants must have the right to work in the UK and be capable of satisfying relevant security and export control requirements. The successful candidate will be required to meet the necessary clearance criteria associated with defence-related programmes. TPBN1_UKTJ