Mechanical design engineer jobs in BoltonCreate job alerts

Howorth have been clean air pioneers since 1858. Utilising our expertise in air engineering to deliver controlled clean environments for healthcare and pharmaceutical and its our people that make us unique. We are delighted to announce we have a new vacancy for an experienced Building Services Mechanical Design Engineer to join our Howorth team. Key Responsibilities: As part of your role at Howorth, your responsibilities will include: • Generate design concepts and solutions to meet project and customer requirements, providing evidence of compliance., • Prepare and present design and construction scheme packs, including engineering details for internal reviews and customer forums., • Conduct site surveys and construction inspections, producing detailed reports as required., • Take responsibility for design and coordination of all Mechanical and Electrical services and equipment installations., • Collaborate and innovate independently or with Engineers/Draughtsmen to develop ideas into detailed schemes, supported by calculations and compliance reports to demonstrate compliance with relevant industry standards, highlighting deviations and risks where necessary., • Deliver high-quality service to customers, on time and with minimal supervision., • Liaise with technical specialists and suppliers (e.g., BMS, Medical Gases, AHUs, Air Equipment, Theatre Control Panels, Lighting etc)., • Perform peer checks on work produced by other Engineers and Draughtsmen., • Prepare and approve drawings, ensuring they meet required standards, reflect design intent accurately, and define construction and inspection requirements., • Support the Lead Design Manager with additional tasks and activities as required. Qualifications & Preferred Skills: • Education: Master’s Degree or equivalent qualification in Mechanical Building Services Engineering/ HVAC., • Standards Knowledge: Working knowledge of UK standards, with specific familiarity with Healthcare Technical Memorandums., • Industry Awareness: Fully conversant with the latest engineering design concepts, standards, and disciplines., • Health & Safety: Knowledge of Health and Safety legislation related to design, including incorporation of risk assessments Desired Experience • Software Skills: Fully experienced and trained in AutoCAD 2D and Revit., • Design Expertise: Proven track record in design development from concept through construction, with strong technical ability to apply knowledge and experience to solve complex engineering problems., • Project Experience: Experience working on a range of multi-disciplinary projects, specifically in healthcare environment., • Product Knowledge: Understanding of Howorth products and their design requirements., • Interpret Design Requirements Quickly: Understand and translate requirements from Clients / Users Specifications into actionable design solutions., • Creative Problem-Solving: Formulate innovative ideas to address design challenges and meet customer expectations., • Collaborate Effectively: Communicate with and support the Design Manager to agree on design schemes and technical concepts, ensuring timely delivery of design work., • Project Liaison: Work closely with Project Managers to provide technical support, conduct site inspections, and witness installations., • Maintain Professionalism: Demonstrate a positive attitude under challenging circumstances and act as a role model for high standards of work and behaviour., • Plan and Prioritise: Organise and manage workload effectively to meet deadlines and align with company objectives.

Automation Engineer Bolton, UK Days £52,000 + Bonus Join a world-class automotive supplier at the forefront of advanced manufacturing, delivering innovative components and systems to major OEMs worldwide. We are seeking a talented and experienced Automation Engineer to drive the next phase of our production excellence in our Bolton facility. In this pivotal role, you will leverage your strong background in PLC programming, process automation, and production engineering to design, implement, and continuously enhance automated systems that boost efficiency, quality, and output in a high-volume manufacturing environment. Responsibilities - Automation Engineer • Design and implement automated processes to optimise production efficiency and throughput, • Analyse existing production processes to identify and apply the most effective automation technologies, • Diagnose and resolve faults in automated production processes and equipment swiftly and effectively, • Manage project budgets, spare parts, and associated expenses, • Partner with Production Engineering and Maintenance teams to implement automated processes and ensure smooth, stable handover to production operations, • Drive continuous development and improvement of production systems, processes, and machine performance, • Lead and support process improvements through structured improvement plans, • Propose and implement efficiency enhancements for machines and production processes, • Monitor performance and task Production Engineers with targeted improvements on the production line, • Plan optimal process flows and operator work methods to maximise output without compromising quality, • Set clear targets for project activities and rigorously track benefits and outcomes Experience & Qualifications - Automation Engineer • Advanced PLC Programming and Fault-Finding expertise (Allen Bradley, Siemens, Keyence, etc.) – ideally qualified to EAL / City & Guilds level or equivalent, • Proven track record in implementing and maintaining PLC systems and automated production processes in a manufacturing setting, • Solid knowledge of robotics, pneumatics, and mechanical systems commonly used in production environments, • Strong logical approach to problem solving and root cause corrective action (RCCA), • Familiarity with formal problem-solving methodologies (e.g., SGA, DMAIC, 7-step, PDCA, 5 Why, Fishbone Diagram) Benefits - Automation Engineer • Discretionary annual Bonus 7.5%, • up to 5.5% employer contribution, • EV Scheme: through salary sacrifice and free charging at site, • Medical Insurance, • Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit ___ Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, PLC Engineer, Electrical Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer

Manufacturing Engineer 12 Month Contract Based in Bolton Offering circa £35ph Inside IR35 Eligible for SC clearance Are you an experienced Manufacturing Engineer? Do hold a Level 3 Apprenticeship or BEng? Are you well experienced with SAP? Are you looking to work with an industry-leading company? If your answers are yes to these, then this could be the role for! As the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved with the assembly manufacturing facility with a key focus to ensure that the products are built efficiently. to this end, you will be carrying out activities including: • Compilation and update of Manufacturing Instructions., • Design, Commissioning, and proving of associated tooling., • Support the industrial validation process through the use of FMEA’s, FAI’s etc., • Resolution of technical problems that may arise during the manufacturing process., • Route card changes as a result or rework activities., • Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions., • BEng in relevant Engineering Degree, • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators., • Have experience in Electronic subassembly manufacture through to System level builds., • Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems., • Must be able to work within, and contribute to a team environment., • Recognise and understand customer requirements, and respond to them., • Understand and work with Company Processes and Procedures., • Have the ability to communicate both within the working group and at various levels of the organisation., • Manual handling training., • ESD training. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Senior Estimator - Water / MEICA / Civils Location: Multiple UK locations | Hybrid Working Available Salary: £85,000 - £95,000 + £6,500 car allowance + bonus + excellent benefits Job Type: Permanent | Full-Time With AMP8 now in full swing, this is your opportunity to play a senior role in shaping the future of the UK's water infrastructure. We are recruiting experienced Senior Estimators to support major clean water and wastewater frameworks across the UK. Our secured pipeline spans projects across the North West, Yorkshire, Midlands, East Anglia, London & South East, South Coast and South West. If you're looking for long-term security, high-value infrastructure schemes and genuine career progression - this is it. The Role - Senior Estimator (Water Infrastructure) As a Senior Estimator, you will take ownership of preparing detailed and accurate cost estimates for MEICA and/or Civil Engineering packages across water and wastewater schemes. Working closely with design, commercial and delivery teams, you will play a key role in securing and pricing projects typically ranging from £1m to £100m+. Key Responsibilities • Leading the preparation of first-principles cost estimates, • Reviewing drawings, specifications and contract documentation, • Managing subcontractor and supplier enquiries, • Producing pricing schedules and cost breakdowns, • Identifying and managing commercial risk, • Contributing to value engineering solutions, • Supporting tender submissions and client negotiations About You We are particularly interested in Senior Estimators with a strong site or engineering background within the water or wider infrastructure sector. You may currently be working as a Senior Estimator - or you could be a Site Engineer, Project Engineer, Site Manager or MEICA Engineer who has transitioned (or is looking to transition) into estimating and pre-construction. You will ideally have: • A background in civil engineering or MEICA project delivery, • Proven estimating experience within water, utilities or infrastructure, • Or strong operational/site experience with the capability to move into a senior estimating role, • Experience pricing from first principles, • Strong knowledge of NEC contracts, • Solid commercial awareness and risk management experience What's On Offer • £85,000 - £95,000 salary (depending on experience), • £6,500 car allowance, • Annual bonus scheme, • 7.5% employer pension contribution, • Private medical insurance, • Digital GP access, • 26 days annual leave + bank holidays, • Holiday entitlement increases with length of service, • Enhanced maternity leave (8 weeks enhanced pay), • Flexible and hybrid working options Apply Now If you're a Senior Estimator looking for a high-impact role within the UK water sector - or you're ready to bring your site and engineering experience into pre-construction - we want to hear from you. Click Apply to register your interest today. Even if an immediate role is not available in your preferred location, we will keep you informed as new AMP8 opportunities arise. JBRP1_UKTJ

Echelon Engineers are recruiting on behalf of our client for a Senior Design Engineer to join their established team in Bolton. This full-time, on-site role involves developing engineering designs and technical drawings for fabrication, alongside various mechanical and related engineering tasks. Wha

Are you an innovative Mechanical Design Engineer looking for an exciting opportunity to advance your career? This company is renowned for its high-performance protection systems and is seeking a talented Mechanical Design Engineer to join its dynamic team. As a Mechanical Design Engineer, you will b

This role is responsible for producing compliant, manufacturable mechanical design output for bespoke steel fabrications. Our client is a UK-based, globally recognised engineering manufacturer specialising in high-performance, bespoke steel protection systems for critical infrastructure environments

Job Category: Energy ServicesRegion / Division: UK RegionLocation: Civic Offices, PortsmouthWorking Hours: 37 Location: Hybrid role - Civic Offices, Portsmouth (minimum 3 days a week in office, 2 days home working) You will be required to travel as required between PCC Assets in Portsmouth, Havant, Gosport, Fareham and Winchester. 37 hours per week. Your new role We are seeking a Principal Mechanical Engineer to join the Capital Projects Team within the Housing, Neighbourhood, and Building Services (HNB) Directorate. The successful candidate will function as Principal Mechanical Engineer and hold extensive knowledge of building services in the construction industry, good people skills and relevant experience. You will require extensive mechanical building services industry experience, working on major projects in the construction sector, have an appropriate qualification / degree and preferably be a member of a professional institution such as CIBSE. The role is mainly based at the Civic Offices in Portsmouth, with hybrid working flexibility. As Principal Mechanical Engineer, you will support the Building Projects Manager developing the mechanical projects team, including supporting graduates and experienced staff. You will need a full driving licence or have a commitment to learn to drive for visiting sites across Portsmouth and other assets in Havant, Gosport, Fareham and Winchester. Please see the full job profile attached at the bottom of this page for all details of this role and what it will involve! Who is the person? • Have extensive Mechanical Design and construction industry experience and have the appropriate technical qualifications/degree and preferably be a member of a professional institution., • Preferably have experience of managing and leading a team., • Have a good knowledge of, and be able to provide, advice and lead others regarding Mechanical Design, Mechanical related legislation, contract law and guidance. Specifically, building regulations, planning law, fire safety, procurement legislation, JCT and NEC contracts., • Have a good knowledge and experience of preparing design concepts, feasibility studies and option appraisals for a varied range of corporate clients, departments, and external organisations., • Have a good knowledge, be able to apply, advise and lead others regarding construction related health & safety legislation including the CDM regulations and the asbestos at work regulations., • Have experience of leading, recruiting and mentoring, developing teams to conduct all aspects of their roles and meet the demands for the Building Engineering service provision., • Have good knowledge and experience to apply cost control, resource planning, professional fee management and financial management techniques for project budgets up to £3 million, and applying PCC financial rules, standing orders, exercising financial control, and ensuring value for money., • Have relevant experience of using Microsoft packages, be able to demonstrate practical IT skills using associated Mechanical design software, Excel spreadsheets to analyse data and MS word in developing reports., • Have knowledge and experience of public procurement rules and procedures and leading the procurement and management of external consultants or contractors for capital projects., • Have experience of managing external consultants and contractors delivering a design on substantial capital projects, individual contract values can be up to £3 million., • Be organised and methodical when managing own priorities and workload., • Experience of communicating with senior staff, other departments, external organisations, contractor organisations, and Councillors., • Have a general awareness of all aspects of building engineering services including electrical aspects. Portsmouth City Council is a unique organisation, committed to making a difference, and is guided by core values that set who we are as people, what we stand for, and how we act. We are committed to our values of respect, integrity, collaboration, inclusivity and being people-focussed. These values set out how we can contribute to the success of the council and our own success as individuals. ___. Additional Information If you have any questions, or would like an informal discussion about the role, please call Harvey Bevan on or email Successfully shortlisted candidates will be contacted and provided with details of an assessment. Candidates who successfully complete the assessment day will be invited for a final formal interview on a mutually agreeable date. The interview will focus on your own knowledge and personal experiences. Our recruitment process Full information about our recruitment process can be found on our support for applicants' page: ___ You must demonstrate why you are suitable against each of the points described in the 'Who is the Person' points on the Job Profile using examples from your experience or transferable skills. This might be through qualifications or descriptive examples from your work / personal experience, which clearly illustrates what you did and the effect it had. If you apply without a detailed personal statement, it is unlikely that you will be successful. We are a disability confident employer and Armed Forces Covenant gold standard. More information can be found at ___ You will need to demonstrate that you have the Right to Work in the UK. No post will be offered without it. Read more about working at Portsmouth City Council and our benefits on our career's portal homepage: ___ Should you require any support in completing the application form please contact or call the recruitment team on .

Automation Engineer Bolton, UK Days £52,000 + Bonus Join a world-class automotive supplier at the forefront of advanced manufacturing, delivering innovative components and systems to major OEMs worldwide. We are seeking a talented and experienced Automation Engineer to drive the next phase of our production excellence in our Bolton facility. In this pivotal role, you will leverage your strong background in PLC programming, process automation, and production engineering to design, implement, and continuously enhance automated systems that boost efficiency, quality, and output in a high-volume manufacturing environment. Responsibilities - Automation Engineer • Design and implement automated processes to optimise production efficiency and throughput, • Analyse existing production processes to identify and apply the most effective automation technologies, • Diagnose and resolve faults in automated production processes and equipment swiftly and effectively, • Manage project budgets, spare parts, and associated expenses, • Partner with Production Engineering and Maintenance teams to implement automated processes and ensure smooth, stable handover to production operations, • Drive continuous development and improvement of production systems, processes, and machine performance, • Lead and support process improvements through structured improvement plans, • Propose and implement efficiency enhancements for machines and production processes, • Monitor performance and task Production Engineers with targeted improvements on the production line, • Plan optimal process flows and operator work methods to maximise output without compromising quality, • Advanced PLC Programming and Fault-Finding expertise (Allen Bradley, Siemens, Keyence, etc.) – ideally qualified to EAL / City & Guilds level or equivalent, • Proven track record in implementing and maintaining PLC systems and automated production processes in a manufacturing setting, • Solid knowledge of robotics, pneumatics, and mechanical systems commonly used in production environments, • Strong logical approach to problem solving and root cause corrective action (RCCA), • Discretionary annual Bonus 7.5%, • up to 5.5% employer contribution, • EV Scheme: through salary sacrifice and free charging at site, • Medical Insurance For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, PLC Engineer, Electrical Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. JBRP1_UKTJ

Job Title: CNC Milling Machine Operator & Setter Location: Manchester Salary: £19.82 per hour Job Type: Full Time, Permanent Working Hours: 36 Hours, 4 days a week Mon-Thurs Do you have experience setting and operating CNC milling machines ideally looking to be part of a successful, niche, but industry leading organisation? EDM design, manufacture and install specialist mechanical applications to a diverse client base. On offer is an opportunity to work for a company that have an excellent reputation in their industry and a state-of-the-art facility to enable them to deliver on bespoke projects for a range of clients. We are currently recruiting for a CNC Operator & Setter on a permanent basis to join our developing production teams. The CNC Operator & Setter is a skilled operative who is responsible for the Machining of detailed high tolerance components, using CNC 3 & 5 Axis machining centers. Duties and Responsibilities • Operating and setting of Mazak 5 and 3 Axis CNC machines., • Primarily conversant with Mazak machine controls with some ability in Mazatrol online programming. (Predominantly Offline fed)., • Interpret engineering drawings, documents, manuals and technical instructions with clear understanding Key Requirements: • Time served Mechanical engineer with extensive machine shop experience., • Completion of a recognised apprenticeship (preferably in composite craft/mechanical technician) or experience to equivalent depth., • Working knowledge of CNC Machine controls such as, Mazak Matrix2, Mazak Smooth X, Heidenhaim and Siemens could potentially be advantageous moving forward., • A skilled CNC Machinist possessing experience backed by fundamental manual machining disciplines., • Candidates with some ability to utilise Autodesk/Delcam Power Mill, programming software would be at an advantage., • A team player able to communicate at all levels., • Must have good work ethic., • Flexibility - shift working and overtime working may be required., • 4 day, 36hr week Monday to Thursday, • 20% premium when working shifts, • Supportive and enjoyable working environment, • Continuous Training and development, • Company Pension, • 25 days holiday + public holidays pro rata Candidates with the relevant experience or job titles of; CNC Programmer, CNC, Operator, CNC Operator, CNC Machinist, Machine Operator, Machinist, Turner, CNC Turner, Programmer, CNC Operative, CNC Engineer, CNC Miller, Miller, Machine Operative may also be considered. JBRP1_UKTJ

HVAC Design Engineer outside IR35 Hybrid working available We currently have a requirement for a HVAC Design engineer, this position is working for a leading HVAC contractor, the position is based out of their head office in the North West but does offer some flexible working. They are looking for someone to provide independent Mechanical Design Services in relation to HVAC Bracketry, small structural steel and chilled water systems. This is an outside IR35 assignment and can offer an immediate start, ongoing work and a generous hourly rate. HVAC Design Engineer project outline requirements: Production and checking of design deliverables in relation to HVAC, specifically HVAC Bracketry, small structural steel and chilled water pipework. Independent review and technical feedback on bracketry and support designs including external supplier review. Technical advice on constructability and integration within congested areas. Recommendations on opportunities to simplify, modularise or standard design to improve efficiency. Input into resolution of design queries, NCRs and Technical clarifications. Ensure consistent design approach including best practice. Deliver Bracketry Design for HVAC Ductwork, Chilled Water Pipework and small steel structures. Review and comment on 3rd party fabrication drawings. Provide calculations and assessments for bracketry adequacy including load checks. HVAC Design Engineer Role Requirements: A strong background in Mechanical Design, including HVAC Bracketry, supports and small structural steel. Familiarity with chilled water systems and integration of mechanical supports. Proficient in relevant design software (AutoCAD, Tekla, PDMS or similar) Knowledge of structural loading in relation to HVAC Bracketry and supports. Experience within defence/Energy or similar sectors would be highly advantageous but not essential. If you are a HVAC Design Engineer and looking for a new contract opportunity outside IR35 and a generous hourly rate, please get in touch with Dean Parry at Emeya Recruitment. I am available 7am-7pm Monday to Friday. Key words: Outside IR35 mechanical design jobs, contract HVAC Design jobs, outside IR35 contract assignments, HVAC contract design vacancies Manchester JBRP1_UKTJ

Our client is a UK-based, globally recognised engineering manufacturer specialising in high-performance, bespoke steel protection systems for critical infrastructure environments. With over 40 years of technical heritage, they operate at the forefront of assurance-led engineering across sectors including nuclear, defence, transport infrastructure and energy. The xrnqpay business delivers full lifecycle sol Is this your next job Read the full description below to find out, and do not hesitate to make an application. Please click on the apply button to read the full job description

Benefits include a four-day working week, a bonus scheme, and social activities.

Bauer Media Outdoor UK is one of the leading Out of Home media owners, with more than 33,000 advertising sites in our portfolio. We welcome applications from candidates with a strong background in mechanical design, particularly those with experience in outdoor or ruggedised products. Assemble and m

Bolton Are you prepared to join an outstanding team that is at the forefront of advanced technology? If you are a driven and experienced engineer looking for a chance to contribute to top-tier Laser Directed Energy Weapon (LDEW) systems, then we have the ideal position for you! DragonFire has been and continues to be a boundary pushing weapon system development programme that has significant industry and customer engagement. Thus far the programme has been aimed at developing the UK's first Laser Directed Energy Weapon (LDEW) concept demonstrator, achieving significant success recently with several highly publicised trials activities. Following on from these successes MBDA is looking for flexible and motivated candidates to continue to develop DragonFire into a world class, deployable, LDEW air defence system. Our ambitious plans involve parallel and interleaved streams of pioneering technology experimentation and rapid weapon system development, providing opportunities across the key weapon system domains of Systems Engineering: requirements, design, performance analysis and certification. Salary: Circa £55,000 - £65,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary, depending on grade. Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The Opportunity The Laser Source Project Engineer (RMO) will work with an external partner to deliver the Laser Source Sub-System for DragonFire. The Laser Source is a high power electro-optical assembly mounted in a mechanical assembly. The Laser Source generates the high energy laser beam. This is integrated to the Beam Director and integrated into a transportable container assembly (both developed by other partner companies). Reporting to the project sub-system lead; this role will be focused on the acceptance and delivery of the Laser Source sub-system, its final assembly, integration, and test. A proven record of complex sub-system delivery and integration is desirable, as is a working knowledge of high energy lasers. The Laser Source RMO will be responsible for: interface management with the external partner, both programmatically and technically; acceptance of and delivery of the Laser Source to final assembly, integration, and test; supporting the functional integration of the Laser Source within the wider sub-system definition; project development in order to continue the evolution of DragonFire.What we're looking for from you: Individuals who have experience in or can demonstrate their ability to: Operate in the early lifecycle of a project, to drive technical direction for the equipment under development and clarify stakeholder needs Worked with third party suppliers and developed technical statements of work and deliverables Develop complex electrical equipment or subsystems and ensure the emergent design is compliant to the project requirements Proactively engages stakeholders and builds relationships that will further the project Lead technical work packages alongside experienced project managers, to demonstrate progress and balance technical risks.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Assystem is an international company with one mission: accelerate the energy transition around the world. Every day, our 6,750 switchers located in 12 countries (Europe, Middle East, Pacific Asia & Africa) connect their six thousand billion neurons to tackle the task of the century: switching to low-carbon energy. We are a collective committed to the actors who are making the energy switch. Sharing our knowledge, expertise and values allows us to innovate and think differently about the energy transition. Drawing on more than 55 years' experience in highly regulated sectors subject to strict security and safety requirements, we provide our customers with engineering and project management services, as well as digital services and solutions to optimize the performance of complex infrastructure projects throughout their life cycle. The Group is currently ranked second in the world for nuclear engineering. To ensure a viable, efficient, and reliable energy future for all. Job description Role Purpose Provide engineering expertise in the design, development and verification of control systems used in nuclear facilities. The role covers programmable logic controllers (PLCs), distributed control systems (DCS), safety-related I&C functions and supporting systems such as SCADA/HMI. The engineer ensures that control system implementations are safe, compliant and fully traceable to nuclear requirements throughout the project lifecycle. Key Responsibilities Develop control system architectures and functional designs that support plant operation, automatic sequences, interlocks and protection functions. Produce technical documents including control philosophies, functional requirements, logic descriptions, cause and effect diagrams and interface specifications. Configure and programme PLC, DCS or specialised control platforms in compliance with nuclear lifecycle expectations and relevant standards. Collaborate with EC&I, process, mechanical, safety and human factors engineers to ensure consistent system behaviour across interfaces. Integrate control logic with SCADA/HMI systems, historians, networks and field instrumentation. Apply good practice in alarm handling and annunciation, aligning with EEMUA 191 and site alarm strategies. Perform verification and validation tasks including peer review, simulation, software testing, FAT, SAT and commissioning support. Develop test specifications and ensure that test coverage aligns with requirements, functional hazards and safety classifications. Maintain configuration control, software versions, coding standards and technical baselines within nuclear quality frameworks.Essential Skills and Experience Control systems engineering experience in a regulated industry, ideally nuclear, defence, energy or similar. Experience producing control philosophies, logic diagrams, sequence descriptions and similar deliverables. Ability to interpret P&IDs, process narratives, safety functional requirements and mechanical schematics. Strong understanding of PLC/DCS programming methods, including structured text, ladder logic, function block and sequential function charts. Experience with verification, testing, simulation or model-based approaches for control logic validation. Knowledge of nuclear I&C lifecycle requirements, safety classification and applicable standards such as IEC 61513, IEC 60880, IEC 61508 and IEC 61226. Familiarity with alarm management principles and experience applying EEMUA 191.Qualifications Knowledge of nuclear new build control architectures, reactor island control systems or balance of plant systems. Experience with digital twin concepts, advanced simulation or MBSE approaches. Experience with cyber security requirements for nuclear I&C systems. Chartered Engineer status or working towards it.Additional information BPSS and SC required Ability to travel Assystem offices and customer sites within UK. To undertake work packages supporting major UK and international Nuclear Clients.Due to the nature of work to be undertaken applicants will be required to meet certain residency criteria in order to attain a minimum level of UK security clearance if not already security cleared to a minimum SC level. We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Skills / Experience: Verification & validation Design modifications COMMISSIONING FMEA’s Configuration control Sub-assembly manufacturing Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications, Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline 5 years’ experience within an engineering discipline. Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within and contribute to a team environment. Recognise and understand customer requirements, and respond to them

Manufacturing Engineer (Assembly and Integration) Bolton £35 per hour initially 12 months 1-stage interview Mon-Fri Certain Advantage is working in partnership with a large engineering company that operates within the aerospace industry and is currently seeking an experienced Manufacturing Engineer. As a key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. What will you be doing? Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEAs, FAIs etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support the Non-Conformance Process using SAP. A couple of things you should know: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline 5 years’ experience within an engineering discipline. Have the ability to interpret Design Drawings to produce Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience in Electronic Sub-Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Recognise and understand customer requirements and respond to them. Understand and work to the Company Processes and Procedures. During an interview, you may be asked about: Industrial Validation / interpreting design drawings. Sounds like you? Apply now! Or WhatsApp/ring Lukas -> (phone number removed) Working with Certain Advantage We go the extra mile to match top talent with the right opportunities. Whether you're looking to make a big impact or take the next step in your career, we’re here to support you. We work with businesses across the UK in Engineering, IT, Finance, and Marketing. If this role isn’t for you, visit (url removed) to sign up for job alerts and career advice

World Class Defence Organisation based in is currently looking to recruit 2x Tooling Design Engineer subcontractors. This role would suit a Mechanical Design Engineer who has Tooling and Creo experience. Previous experience of working in the defence or aerospace industry would be great. Rate: £50.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Bolton or Stevenage – depending on your preference Hybrid / Remote working: The role will be a mix of onsite and remote working Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Tooling Design Engineer Job Description: You will be part of a high performing team. You will be creating Tooling solutions on a wide variety of projects. This is a critical role collaborating with wider multi-disciplinary teams to understand requirements and deliver solutions. We are looking for someone with passion and drive to take ownership of all aspects of the delivery of these solutions. Responsibilities: Development of technical requirement. Creation of concept designs. Organising design/peer reviews. Managing workload and priorities. Completion of detailed design. Interfacing with definition team to create 2-D drawings. Publication of all CAD data. Skillset/experience required: High performing teams need high performing and competent individuals. To be suitable for this role, candidates will be able to demonstrate several the following attributes: Ideally Degree/HND/HNC qualified with demonstrable experience in Mechanical design and development using appropriate engineering tools and techniques. High level of capability in the use of industry standard 3D CAD packages such as PTC Creo Experience of operating in an environment employing development techniques such as FMEA, DFA, DFM etc Experience of developing manufacturing tooling and mechanical handling equipment from initial concept to production of 2D drawings. Ability to understand the customer needs to develop a design solution

Associate Director - Electrical Engineering Location: Bolton Salary: Up to £75,000 Job Ref: 39636 A rare opportunity has arisen for an experienced Electrical Engineer ready to step into an Associate Director role within a well-established Building Services Consultancy. This position offers the chance to work in a client-focused environment with a long-standing, secure pipeline of projects across a diverse range of sectors. Based in Bolton, you will also attend design team meetings and site visits across Manchester, the wider North West and occasionally throughout the UK. The business operates across multiple offices and has built a strong reputation for delivering innovative, practical, and technically robust engineering solutions. This role will see you leading electrical design delivery from feasibility through to RIBA Stage 5, working on a wide variety of projects including commercial developments, pharmaceutical facilities, residential schemes, leisure projects, and mixed-use developments. The pharmaceutical work in particular offers exposure to complex technical environments such as laboratories alongside more traditional office and refurbishment projects. You will work alongside a strong multi-disciplinary team, including mechanical counterparts and senior engineers, while also playing a key role in managing client relationships and contributing to the strategic direction of projects. It is particularly important that you are comfortable with being client facing and being involved in design team meetings. Key Responsibilities: Lead electrical design projects from concept through to detailed design (RIBA Stage 4) and as built stages (Stage 5) Chair and contribute to Design Team Meetings across multiple sites Act as a key client-facing representative, building and maintaining strong relationships Provide technical leadership and mentorship to junior and intermediate engineers Oversee project resourcing, programme delivery, and commercial performance Support tendering processes, fee proposals, and project estimation Ensure designs align with sustainability goals and carbon reduction targetsKey Requirements: Strong technical expertise in Electrical Building Services design Proven experience delivering projects across sectors such as commercial, residential, or pharmaceutical Ability to lead projects and coordinate multidisciplinary teams Experience in client-facing roles and stakeholder management Knowledge of sustainable design principles and renewable technologies Experience with tendering, and resource planning Ability to work autonomously while contributing to a collaborative team environmentChartership is desirable but not essential; equivalent experience will be considered. Ideally, you will hold an HNC, Degree, or Master's qualification in Electrical Engineering or Building Services Engineering. This is an excellent opportunity for an existing Associate or a Senior/Principal Electrical Engineer looking to step up into a leadership role within a growing consultancy that offers stability, variety of work, and genuine career progression in a supportive, non-bureaucratic environment. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Bolton An exciting opportunity within Component Engineering team to help shape and play an important part in support across the business. No two days are the same supporting a large network of teams within the business. Salary: Circa £ 48,000 depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As MBDAs mission to stay at the forefront for Electronics, Electrical, Mechanical & Materials commodities an exciting opportunity has arisen to join our Components team and lend your expertise. You will play a critical role in managing Electronic Components, assessing market trends and technical risks. The role demands a passionate professional who can lead in an Electronics or RF semiconductor specialism. The role requires technical advisement to a large amount of stakeholders across the business from Projects, Engineering teams, Procurement, Customer Service Support and many more. You will be accountable for providing Technical advice and reporting on risks, working with suppliers and understanding the needs within MBDA to suit the requirement of our ever-evolving business needs. As the Principal Electrical Component Engineer, you will maintain your expertise in specialist areas and ensure that this expertise is effectively passed to others, including participating in design reviews, training and other development activities, as appropriate, enabling MBDA to maintain its capability. There is also the opportunity to support and lead international collaboration within the company, helping define best practice and manage the adoption and adherence of agreed methodologies The Component Engineering team you will be a part of has been vital to our product delivery by providing highly sought after subject matter expertise when it comes to the individual's relevant commodity experience. The team operates from both Stevenage and Bolton sites, representing a diverse group of friendly supportive colleagues who pull together when needed to achieve our mission. What we're looking for Knowledge or experience within an electronic component discipline. Knowledge of electronic suppliers especially in semi-conductors Appreciation of REACH and RoHS regulations. Strong communication skills both written and verbal. Pro-activeness and self-motivation to improve self, improve process, and get the job done. It would be advantageous if the candidate has worked in supply chain and knowledge of Electrical and electro-mechanical products. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Working: The role offers flexible working but does require engineers on site for 4-5 days per week and is on a secure site where SC clearance is needed. . We have a great opportunity for an Electronics Test Engineer to join the Manufacturing team at one of our major defence clients. . The Manufacturing Test Engineer will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. . The Manufacturing Test Engineer will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different projects in development and production. - Main Responsibilities; Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. - Skill and Experience; Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. - Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Benefits; Bonus: Up to £2,500 (based on performance). Up to 21% (based on performance) Pension: Up to 14% total contribution. Parental Leave: Enhanced parental, maternity, and shared parental leave. Flexi Leave: Up to 15 additional days. Facilities: On-site perks like subsidised meals and free parking. Training and Development: Excellent opportunities for career progression and skill development Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. *Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. *Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments

Our client, a trusted partner of the UK's Ministry of Defence, is seeking an experienced Manufacturing Engineer with expertise in Assembly and Integration, particularly in circuit card assemblies. Based within the unit and missile assembly manufacturing facility, you will play a key role in ensuring products are built efficiently, on time, and within budget. As a vital member of the Manufacturing Engineering team, you will provide support across multiple projects, contributing to the successful delivery of high-quality manufacturing solutions. Key Responsibilities: Prepare and maintain detailed Manufacturing Instructions to ensure accuracy and clarity. Design, commission, and validate the necessary tooling for production processes. Support industrial validation activities, including FMEA and First Article Inspection (FAI). Diagnose and resolve technical issues encountered during manufacturing. Update route cards to reflect changes resulting from rework activities. Manage configuration control by incorporating design modifications into manufacturing documentation. Assist with the Non-Conformance process, utilising SAP for tracking and resolution. What do you need?: Qualification Requirements: Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard"or" Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.)"and" Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved (These qualifications must meet the standard to be considered for the role). "or" BEng Degree in a relevant Engineering subject. Skill Requirements: Ability to interpret design drawings and produce precise Manufacturing Build Instructions for both skilled and semi-skilled operators. Proven experience in electronic sub-assembly manufacturing through to full system builds. Knowledge and hands-on experience of assembly processes for small or miniature electro-mechanical actuation systems. Strong team player with the ability to collaborate and contribute effectively within a group environment. Ability to understand and respond to customer requirements. Familiarity with and adherence to company processes and procedures. Excellent communication skills, capable of engaging effectively within the team and across various organisational levels. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunitiesThe opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Trainee Air Conditioning Installation Engineer / Improver Westhoughton (Field-Based) BL5 Full-Time | Permanent Salary: £14.00 per hour (negotiable dependent on experience) Hours: Monday–Friday, 8:00am–4:30pm Benefits: Overtime opportunity | 28 days annual leave | Company pension Controlled Air Solutions Ltd is one of the UK’s longest-established specialist air conditioning contractors, providing nationwide design, installation and maintenance services since 1998. The company offers solutions for domestic, commercial and public-sector clients, working with a wide range of leading HVAC manufacturers and systems to deliver high-quality climate control environments. The Role We are seeking a Trainee Air Conditioning Installation Engineer / Improver to support installation projects across Westhoughton and occasionally nationwide. This is an excellent opportunity for someone with practical ability and a willingness to learn who wants to build a professional career in HVAC installation. As part of this role, you will assist senior engineers on site during the installation of air conditioning systems, work closely within project teams, and progressively develop your skills across leading manufacturer equipment and installation techniques. Key Responsibilities Support the installation of DX, Split and VRF/VRV air conditioning systems Assist experienced engineers during project work, on site and in the field Learn to install equipment from manufacturers such as Mitsubishi Electric, Daikin, Toshiba and Panasonic Follow all health & safety policies and procedures Complete accurate documentation and reports as required Provide a professional and customer-focused service as part of the installation team Training & Qualifications Provided Full training in air conditioning installation techniques PASMA (mobile access tower) qualification (subject to probation) IPAF (mobile elevating work platform) qualification (subject to probation) UKATA Asbestos Awareness training Assistance in obtaining a CSCS card if not already held About You You’ll be a good fit if you have: A practical, mechanical, engineering-minded approach A full, clean UK driving licence (essential) Confidence working at heights (training provided) Basic IT competence and the motivation to develop new skills You are based within easy commute of Westhoughton BL5 Previous HVAC experience is advantageous but not essential - full training is provided where required. Benefits Competitive hourly rate with opportunity for overtime 28 days annual leave (including bank holidays) Company pension scheme Structured training and apprenticeships leading to long-term career progression Work with a well-established industry leader in HVAC installation How to Apply If you are ready to begin a rewarding career as a Trainee Air Conditioning Installation Engineer, we would love to hear from you. Apply today with your CV and start your journey with Controlled Air Solutions Ltd! Applicants must be authorised to work in the UK. Other suitable skills and experience include Trainee Engineer, Engineer Improver, Junior Air Conditioning Engineer, Entry Level Engineer, Engineering Apprentice, Mechanical Engineer Trainee

Bolton We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: · Company bonus: Up to £2,500 (based on company performance and will vary year to year) · Pension: maximum total (employer and employee) contribution of up to 14% · Overtime: opportunity for paid overtime · Flexi Leave: Up to 15 additional days · Flexible working: We welcome applicants who are looking for flexible working arrangements · Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments · Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... . Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: • We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products., • Your role as an Electronics Engineer is to develop electronic solutions for cutting-edge systems. This will mainly include; Design, qualification and certification activities across the whole product lifecycle for Land, Sea, and Air platforms, • This role offers various types work, challenges, and a multitude of applications; typically this includes: reviewing requirements; generating a concept solution, schematics, and manufacturing data packs; involvement in component & COTS (commercial off-the-shelf product) selection; design, test, qualify to meet high-reliability & harsh environments; technical report writing; involvement supporting investigations and our colleagues in manufacturing. You can work in our labs and get hands-on working on bread-board demonstrators through to flight standard hardware., • This is a fantastic opportunity to shadow our more experienced Electronics Engineers & Technical Leads, learn from them and the teams around you before leading your own projects and developing to a Senior Electronics Engineer or Tech Lead., • We respect new perspectives and experiences, and we value our collaborative ways of working.We are committed to growing and supporting diversity in our workforce and ensuring everyone has equal opportunity to reach their potential. We believe that any individual with a learning mindset and belief in what we docan make a difference here. What we're looking for from you: • We are looking for proactive individuals who are motivated to develop within their Senior Electronics Engineer role;, • Candidates would be ideally degree qualified (electronics engineering, science, physics) or HND equivalent experience, have been involved in development of electronics products, and ideally, have a background in complex electronics and working in a multi-functional team (e.g. with mechanical, firmware, and software)., • You will have a sound track record in electronic design capability throughout the product life cycle, i.e. early concept through to production; be organised with an eye for detail and a sense of pride in what you deliver., • Most important for us is that you have the right attitude and a passion to develop - we can offer the training and support you need to enable you to broaden your skills and experience and take steps towards senior roles and onwards. We offer a clear progression path and will give you support for career growth and development. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

This is a fantastic opportunity for an experienced Test Development Engineer, specialising in circuit card electronic test, to join our Test Development team. It is an exciting time as we begin work on a host of challenging, but rewarding projects, from concept design through to series production and full in-service support! Salary: Circa £ 43,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This is a fantastic opportunity for an experienced Test Development Engineer, specialising in Circuit Card electronic test, to join our Test Development team at our Bolton site. Working in an established team as a Test Development Engineer you'll be creating and maintaining small to medium-sized automated test systems. You'll be responsible for the development and implementation of test strategies and, where appropriate, influencing our product through 'Design for Test'. This involves creating test strategy documents, designing Interchangeable Test Adaptors (including both mechanical and electrical elements) and software development of automated test sequences in accordance with a test specification. You'll also have the opportunity to get involved with continuous improvement activities and the development of new technologies What we're looking for from you: Sound understanding of fundamental analogue and digital circuit design. Experience of creating and using technical documentation and Drawings i.e. Schematics, PCB layouts, Engineering Drawings. Significant experience creating Automated Test Equipment. Experience of using NI LabVIEW and/or TestStand preferable. Experience in Boundary Scan / XJTAG preferable. Strong problem solving skills with an exceptional eye for detail. Strong analytical skills and passion for driving continuous improvement, with six sigma experience desirable.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Manufacturing Engineer 12 Month Contract Based in Bolton Offering £35ph Inside IR35 Are you an experienced Manufacturing Engineer? Do you hold an Apprenticeship and NVQ/SVQ Level 3? Are you experienced with SAP? Are you looking to work with an industry-leading company? If your answers are yes to these, then this could be the role for! As the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Compilation and update of Manufacturing Instructions. Design, Commissioning, and proving of associated tooling. Support the industrial validation process through the use of FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non-Conformance Process using SAP.Your skillset may include: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21, with a Formal further education certificate to HNC or equivalent in a relevant subject SAP experience The ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions Experience in Electronic subassembly manufacture through to System level builds Experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems Manual handling training. ESD training. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Manufacturing Engineer 12 Month Contract Based in Bolton Offering £35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Mechanical Design Engineer Permanent; full time Bury; Hybrid Do you have experience designing HVAC systems within building services or similar environments? Are you confident using AutoCAD, Revit MEP or similar design tools? Do you have a degree in Mechanical or Building Services Engineering or equivalent? What's in it for you Salary £50,000 to £60,000 depending on experience 25 days holiday plus bank holidays; option to buy or sell up to 5 additional days Pension; 5% employee contribution and 6% employer contribution Single private healthcare Life assurance; 4x salary Group income protection Health cash plan 36.5 hour working week; early finish at 2pm on a Friday What will you be doing? Design HVAC systems including ductwork, piping and equipment layouts Carry out heating and cooling load calculations using industry standard software Select HVAC equipment and produce detailed technical specifications Develop design drawings and documentation using AutoCAD, Revit or similar Ensure compliance with building regulations, CIBSE and BS EN standards Work closely with project managers and multidisciplinary engineering teams Attend site for inspections, commissioning and troubleshooting when required Support cost estimation and procurement activities Incorporate energy efficient and sustainable design principles Keep up to date with new HVAC technologies and industry developments Where will you be doing it? Established engineering business with over 150 years of heritage; specialists in HVAC and ventilation systems for safety critical environments; delivering projects across energy, defence and transport sectors; collaborative design environment working alongside experienced engineers and project teams What will you need? Degree in Mechanical Engineering or Building Services Engineering or equivalent Experience in HVAC design within a building services or engineering environment Proficiency with AutoCAD, Revit MEP and BIM workflows Experience with HVAC design tools such as Hevacomp or similar Strong understanding of thermodynamics, fluid dynamics and heat transfer Knowledge of CIBSE and relevant UK building standards Ability to carry out detailed engineering calculations and problem solving Strong communication skills and ability to manage multiple projects Ideally working towards or holding CEng or CIBSE membership Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Role: Senior EC&I Engineer Location: Bolton Salary: £45-£59k (Depending on Experience) We are seeking a skilled EC&I (Electrical, Controls, and Instrumentation) Engineer to join our clients team, specialising in the design, installation, and maintenance of advanced automatic door and access systems. The successful candidate will work on a wide range of systems, from pedestrian doors to oversized industrial and safety-critical doors used in nuclear, defence, transport, and high-hazard facilities. This role requires technical expertise in electrical, control, and safety systems, along with a strong understanding of regulatory compliance and performance standards. Key Responsibilities: • Lead multi-departmental integration to define project scope and support Functional Design Specifications., • Conduct site assessments to evaluate existing systems and verify modification requirements., • Design control systems, including wiring schematics, panel assemblies, and cable schedules., • Analyse and verify Performance Levels (PL) of safety-related parts of control systems using SISTEMA., • Produce EC&I drawings, documentation, and calculations in compliance with standards., • Provide technical support to site teams, including fault diagnosis and troubleshooting., • Review and verify EC&I drawings and documentation produced by other engineers., • Ensure adherence to electrical and safety regulations and company processes., • Contribute to Non-Conformance Report (NCR) resolution and raise NCRs when necessary., • Maintain strong collaboration with internal teams, subcontractors, and external stakeholders., • Participate in continuous improvement initiatives, knowledge transfer, and innovative design solutions., • Flexibility to work overtime to meet project deadlines as required. Qualifications, Knowledge & Experience: • Qualification in Electrical Engineering or related discipline (NVQ Level 3, HNC/HND, or equivalent)., • Proven experience with automated doors, access systems, or similar electro-mechanical systems., • Strong understanding of electrical systems, control circuits, and fault-finding., • Knowledge of UK Supply of Machinery (Safety) Regulations 2008 and Machinery Directive principles., • Familiarity with relevant standards (BS EN 16005, BS EN 12453, BS ISO (phone number removed) & 2, BS EN 60204, BS EN 7671)., • Proficiency in reading and interpreting electrical drawings and schematics., • Experience with 2D and 3D CAD software (preferably AutoCAD 2D / Inventor 3D)., • Ability to independently design compliant EC&I systems and produce associated documentation., • Experience generating hand and software-based calculations., • Understanding of PLC software packages is advantageous., • Strong focus on quality, output, and team motivation., • Experience with industrial and powered door systems, including roller shutters, sectional doors, and sliding doors., • ECS/CSCS card and SC Clearance eligibility., • Experience with safety-critical systems in nuclear, defence, or heavy industry environments., • Advanced knowledge of standards such as BS EN 16005, BS EN 12453, BS EN ISO 13849, and BS EN 60204., • Experience using SISTEMA for PL calculations., • Understanding of VFDs, safety PLCs, interlock systems, and emergency release mechanisms. **You must have the full right to work in the UK without the need for sponsorship both now, and in the future

We are looking for a Production Engineer to join a well established UK manufacturer based in Bolton that is part of a global organisation. The successful candidate will play a key role in supporting production and engineering teams. As a Production Engineer, you will ensure products are manufactured to specification, support new product introduction, maintain tooling and fixtures, and drive continuous improvement initiatives. This role offers a hands on opportunity to work closely with multiple departments and contribute to the efficiency and quality of manufacturing processes. Salary: £36,000 – £42,000 per annum (dependent on experience). Hours: Monday–Thursday 07:30–16:00, Friday 07:30–12:50 (38 hours per week). As a Production Engineer, your main duties will include: * Managing the lifecycle of production tooling and fixtures, including maintenance, calibration, and ongoing optimisation. * Creating, editing, and validating CNC programs using Fanuc, Heidenhain, or Siemens systems. * Optimising CNC milling and turning operations, from method selection to cycle time reduction and quality assurance. * Leading continuous improvement initiatives with measurable targets, including cycle time, scrap, changeover, and right-first-time performance. * Designing and implementing jigs and fixtures to improve repeatability, ergonomics, and shop floor safety. * Providing hands-on support for setup issues, technical bottlenecks, and process deviations. * Training operators and setters on new tooling, CNC programs, and best practices. * Maintaining accurate technical documentation including tool sheets, routings, BOMs, and manufacturing drawings. * Collaborating with Planning, Design, Quality, and Maintenance teams to ensure smooth production flow. * Supporting industrialisation and introduction of new products into manufacturing. Requirements: * HND, HNC, Degree, or equivalent in Mechanical, Manufacturing, or related engineering discipline. * Experience in production or manufacturing environments. * Proficiency in using lathes and milling machines. * The ideal Production Engineer will be proactive, technically confident, and focused on improving manufacturing processes. * Experience with CNC programming on Fanuc, Heidenhain, or Siemens systems. * Skilled in using standard power tools (drill, grinder, jigsaw). * Ability to read and interpret technical drawings. * Strong problem-solving skills with a practical, hands-on approach. * High attention to detail and good organisational ability. * Effective communication and teamwork skills. * Familiarity with continuous improvement techniques. * Experience using CAD software (e.g., SolidWorks, AutoCAD Inventor) is desirable but not required. Production Engineer Benefits: * 25 days holiday plus bank holidays. * Company pension scheme. * Cash Health Plan and Employee Assistance Programme, Cycle to work scheme, Life assurance. * Full training and ongoing support. * Opportunities for career progression. * Friendly and inclusive working environment. * Free onsite parking. This Production Engeering role is being advertised by S&D Trade Recruitment who are operating as an employment business and are acting as an employment agency on behalf of our client. Please apply with currrent CV and ask for Shelley in the office

Bolton Are you prepared to join an outstanding team that is at the forefront of advanced technology? If you are a driven and experienced engineer looking for a chance to contribute to top-tier Laser Directed Energy Weapon (LDEW) systems, then we have the ideal position for you! Salary: Up to £57,000 depending on experience Dynamic (hybrid) working: 2- 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity: The role of the verification and validation lead for the physical domain is to co-ordinate the overall physical functionality, performance and constraints of the DragonFire system with the weapons system team in order to ensure the consistency of the weapon system product with system requirements and project commitments. This includes understanding, communicating and certifying all aspects of the DragonFire Physical Design for all system components, including: Environmental & EMC performance Power utilisation Storage & TransportabilityThe V & V lead will need to co-ordinate the work packages for both internal and external suppliers to develop certification strategies for the physical domain. Working with RMO's and DAs to ensure that DVP's have appropriate coverage. This role will be focused on the physical certification aspects of the systems. Although an understanding of how these sub-systems work will also be required to support product delivery. As an V and V lead, your main responsibilities will be: Provide physical design compliance statements and CM for review at system level Design change impact assessment Log and track defects found during V&V activities, and collaborate with development teams to resolve them. Manage Design Verification Plan and requirements in Application Lifestyle Management Lead the technical progress meetings and milestone reviews with the supplier Understand sub-contractor management both internal and external Understand and contribute to the key activities in the engineering development lifecycle such as design reviews (PDR/DDR/CDR) Manage schedule, cost, quality and performance metrics for assigned work packages Work within a multi-discipline engineering team (e.g. Systems, mechanical, electrical, software etc...) Limit technical risks through application of mitigation strategies Design reconciliation activities associated with design change, including generation of verification and validation strategies Uplift of other regulatory documentation such as CE marking Support uplift of key documentation, such as technical publications Responding to Customer queries with regard to product usage, interpretation of compliance, certification, etc.What we're looking for from you: Knowledge of systems engineering principles, processes and practices Appreciation of requirements engineering at System, Subsystem or Component level Knowledge associated with the design and build of hardware Awareness of test procedures required to verify products and the gathering of evidence to enable certification. Confidence in presenting technical engineering information and promoting decision making Experience of technical report writing and use of configuration management toolsOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

My client, a bespoke MEP and Sustainability Consultancy based in Bolton, is searching for a Principal Building Services Design Engineer to join their team to work on UK based and international projects across the Caribbean. This is a hybrid role, offering varied projects spanning high-end residential, commercial, retail and healthcare projects. This opportunity is available with a market leading Consultancy who specialise in sustainable and innovative builds in coastal areas. As a Principal Building Services Engineer, you will be expected to manage and mentor the team, check technical designs and complete detailed HVAC and mechanical designs using AutoCAD and Revit for bespoke builds, holiday resorts, condos, high-end residential, aviation and healthcare facilities across the UK and Caribbean. You will be expected to visit the Caribbean to review sites across the region. Flights and accommodation will be covered by the company. You will also be expected to; -Complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, IES, Open Buildings or Elite). • Prepare and review mechanical drawings, schematics, simulations, vertical transportation and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. • Attend internal and client meetings to resolve design issues/queries and align project objectives both in the UK and Caribbean. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction in the UK and Caribbean when needed. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role is from the office in Bolton on a hybrid basis. This exciting role offers international projects and travel, career progression and the chance to manage a team. As a Principal Building Services Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK and international Consultancy completing detailed HVAC designs, hot and cold water pipe design for residential, holiday resorts, hotels, high-end residential or leisure complexes and healthcare schemes. MEP Design experience is essential and you must have hands-on design experience using Revit and AutoCAD. Design experience for commercial and aviation sectors is also a bonus. You are also required to have a detailed knowledge PAS 1192-5 and other relevant codes and have a keen understanding of BREEAM and net zero. Candidates are required to have a valid UK driving licence to visit sites across the region and a passport for international travel. If this role is of interest, please contact Jordanna Morris at Aztrum

EC&I Engineer Bolton Competitive Salary Overview: We are seeking a skilled EC&I Engineer to join our clients team, specialising in the design, installation, and maintenance of advanced automatic door and access systems. The successful candidate will work on a wide range of systems, from pedestrian doors to oversized industrial and safety-critical doors used in nuclear, defence, transport, and high-hazard facilities. This role requires technical expertise in electrical, control, and safety systems, along with a strong understanding of regulatory compliance and performance standards. Key Responsibilities: Lead multi-departmental integration to define project scope and support Functional Design Specifications. Conduct site assessments to evaluate existing systems and verify modification requirements. Design control systems, including wiring schematics, panel assemblies, and cable schedules. Analyse and verify Performance Levels (PL) of safety-related parts of control systems using SISTEMA. Produce EC&I drawings, documentation, and calculations in compliance with standards. Provide technical support to site teams, including fault diagnosis and troubleshooting. Review and verify EC&I drawings and documentation produced by other engineers. Ensure adherence to electrical and safety regulations and company processes. Contribute to Non-Conformance Report (NCR) resolution and raise NCRs when necessary. Maintain strong collaboration with internal teams, subcontractors, and external stakeholders. Participate in continuous improvement initiatives, knowledge transfer, and innovative design solutions. Flexibility to work overtime to meet project deadlines as required. Qualifications, Knowledge & Experience: Qualification in Electrical Engineering or related discipline (NVQ Level 3, HNC/HND, or equivalent). Proven experience with automated doors, access systems, or similar electro-mechanical systems. Strong understanding of electrical systems, control circuits, and fault-finding. Knowledge of UK Supply of Machinery (Safety) Regulations 2008 and Machinery Directive principles. Familiarity with relevant standards (BS EN 16005, BS EN 12453, BS ISO (phone number removed) & 2, BS EN 60204, BS EN 7671). Proficiency in reading and interpreting electrical drawings and schematics. Experience with 2D and 3D CAD software (preferably AutoCAD 2D / Inventor 3D). Ability to independently design compliant EC&I systems and produce associated documentation. Experience generating hand and software-based calculations. Understanding of PLC software packages is advantageous. Strong focus on quality, output, and team motivation. Experience with industrial and powered door systems, including roller shutters, sectional doors, and sliding doors. ECS/CSCS card and SC Clearance eligibility. Experience with safety-critical systems in nuclear, defence, or heavy industry environments. Advanced knowledge of standards such as BS EN 16005, BS EN 12453, BS EN ISO 13849, and BS EN 60204. Experience using SISTEMA for PL calculations. Understanding of VFDs, safety PLCs, interlock systems, and emergency release mechanisms. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

An established specialist leading manufacturer is seeking a forward-thinking Design Engineer to join its production function.

Experience of mechanical design engineering within a very complex, high-technology engineering environment such as aerospace, defence, automotive, and similar. We currently have several vacancies available as we are looking for experienced Mechanical Design Engineers to work in all areas of the prod

Our focus is on helping organisations achieve their sustainability goals and move towards a net-zero future, using advanced design tools and innovative thinking. If you're passionate about engineering and want to work on projects that matter, this is the perfect opportunity to make your mark. Lead

The role offers flexible working but does require engineers on site for 2/3 days per week and is a on secure site where SC clearance is needed.

Senior Mechanical Design Engineer. Senior Mechanical Engineer£up to 60kBase+Benefits Ref:ABJ6502. With operations across the globe, the company is known for delivering innovative, high-reliability engineering solutions used in mission-critical environments worldwide.

What you’ll need * At least 5 years’ experience in mechanical building services design * Consultancy experience, so you’re f. What you’ll do You'll design mechanical systems for buildings, covering everything from heating, ventilation and air conditioning. Using He

Location: Hybrid working available (3 days per week office/site-based) Type: Contract Rate: £68 per hour Your Role As a Principal Mechanical Engineer, your responsibilities will include: ·Leading a team of Mechanical engineers in delivering technical design work on complex, multi-d

What we would like from the Mechanical Design Engineer: Degree qualified or HNC/HND with relevant experience Minimum of 5 years of design experience in mechanical design, product development and manufacturing Proficient with 3D modelling and 2D detailed drafting on Autodesk Inventor and AutoCAD to

Senior Mechanical Design Engineer. Senior Mechanical Design Engineer. An established engineering design consultancy is seeking an experienced.

Management of mechanical designers including review and approval of designs. City Site Solutions - Scotland are looking for a Senior Mechanical Design Engineer for a staff role in the Manchester or Motherwell. Full accountability for the design of mechanical services for data centre projects.

Are you an experienced Mechanical Design Engineer ready to take the next step in your career? A leading building services consultancy is looking for a Senior Mechanical Design Engineer to join their established and growing team. This is a fantastic opportunity for a technical and ambitious individu

Our client is a rapidly expanding SME who supply the design, manufacture, installation and servicing of products within the clean energy sector and due to continued expansion they are now looking to recruit a Senior Mechanical Design Engineer. We are looking for an experienced Design Engineer with d

Siemens NX experience would be ideal Good theoretical mechanical engineering knowledge of core principles and tight tolerances Excellent communication skills both verbal and written Proficient using MS Office Excellent organisational skills and time management skills Have the ability to work well al