Trabajos national security en BoltonCrear alertas

Field Service Engineer – Fire & Security Location: Sheffield & Yorkshire region Salary: £30,000–£40,000 DOE + Vehicle + Overtime + Benefits Contract: Permanent, Full-Time A leading national fire & security specialist is seeking an experienced Field Service Engineer to join their growing team in the Sheffield/Yorkshire area. This role offers a mix of installation, service, maintenance and commissioning across fire alarms, emergency lighting and electronic security systems. The Role • Install, service and fault-find on fire alarms, intruder, CCTV, access control and emergency lighting, • Carry out PPM, compliance testing and commissioning, • Complete digital job reports, handover packs and asset updates, • Work from drawings/specs and ensure high standards of workmanship, • Provide excellent customer service and maintain safe working practices, • Experience with at least three disciplines: Fire / Emergency Lighting / Intruder / CCTV / Access Control, • Strong fault-finding skills, • Knowledge of BS 5839, PD 6662/EN 50131, BS EN 62676 (preferred but not essential), • Electrical experience, • Full UK driving licence, • £30k–£40k basic salary DOE, • Company van & fuel card, • Tools, PPE, tablet & phone, • FIA/manufacturer training, • 25 days holiday + bank holidays, • Pension & life assurance, • Local working patch

Fire & Security Service Engineer (Manchester) • Location: Field-based across Manchester, Bolton and Oldham, • Job Type: Permanent, Full-time Day-to-day of the role: • Deliver PPM servicing and inspection of addressable/conventional fire alarm systems as per BS 58391:2025, including full system testing, documentation, and certification over a 12-month period., • Conduct routine servicing and statutory testing of emergency lighting systems, diagnosing faults, and completing repairs or replacements while ensuring compliance with BS 5266 and other relevant safety standards., • Perform planned preventative maintenance on access control systems to ensure optimal performance and early identification of potential failures., • Service and maintain fire and intruder alarms to PD 6662 / EN 50131 requirements, including diagnostics on signalling paths and batteries, and maintain records to insurer/NSI expectations., • Maintain and test CCTV systems in line with BS EN 62676 application/maintenance guidance, including detector activated systems where applicable., • Provide reactive callouts, aiming for first-time fixes, commission minor remedials/small works, and escalate complex issues with clear evidence and reports., • Produce accurate digital service reports, asset updates, cause and effect confirmations, and provide customer training at handover., • Proven service/maintenance experience in at least three of the following: fire, emergency lighting, intruder, CCTV, access control, with confident fault-finding and customer communication skills., • Working knowledge of BS 58391:2025, PD 6662/EN 50131, and BS EN 62676., • Full UK driving licence., • Vehicle, fuel card, tools, PPE, tablet/phone + structured training (FIA & manufacturer)., • 25 days’ holiday + Bank Holidays, pension, life assurance, and localised patches.

Fire & Security Service Engineer (Manchester) • Location: Field-based across Manchester, Bolton and Oldham, • Job Type: Permanent, Full-time ZIPC1_UKTJ

Fire & Security Service Engineer (Manchester). Join a national leader in security and fire solutions, as a Fire & Security Service Engineer. To apply for the Fire & Security Service Engineer position, please submit your CV and cover letter detailing your relevant experience and why you a

Fabricator Sales Manager Door Hardware Job Title: Fabricator Sales Manager Door Hardware Industry Sector: High-Security Cylinder Locks, Door Hardware, Door Fabricators, Door Installers, Architectural Hardware, Secure Access and Smart Locking Technology Area to be covered: National Remuneration: £40,000-£50,000 Basic + £75,000-£85,000 OTE Benefits: Car allowance and benefits package The role of the Fabricator Sales Manager Door Hardware will involve: Field sales position selling high end manufactured range of door cylinders Focus of the role to sell into door fabricators and door installers Initially 75% new business development, 25% account management of an existing portfolio of door fabricator customers (although this will become 50/50 over time) Dedicated field sales professional for the fabricator customer base nationally Existing customer vary in size from 10 to 1,000 cylinders per month Initial are focus will be determined by applicants existing experience and relationships Remote based role, but with the option to work from the West Midlands UK head office when needed The ideal applicant will be aFabricator Sales Manager Door Hardware with: Must have a proven track record of winning and managing door fabricator or door installer customers Knowledge of door hardware required Specific experience with door cylinders is not essential but may be advantageous Technology savvy Driven, tenacious and commission hungry Contacts within fabricator and installer customers preferred New business hunter Excellent attention to detail Company Private limited company Est 2015 20+ employees Part of a larger organisation Mitchell Maguire is a specialist Construction Field Sales Recruitment Consultancy, dealing exclusively with Construction Field Sales Jobs, Construction field sales vacancies and Specification field sales positions within: High-Security Cylinder Locks, Door Hardware, Door Fabricators, Door Installers, Architectural Hardware, Secure Access and Smart Locking Technology JBRP1_UKTJ

Guidant Global is partnering with our client, a trusted ally of the UK's Ministry of Defence, to recruit a skilled Electrical Calibration Operator. This role involves performing regular calibration of Special to Type Test Equipment (STTE) and Commercial Off the Shelf (COTS) equipment. This is an excellent opportunity for a professional looking to contribute to critical defence projects and grow within a dynamic and innovative environment. Key Responsibilities: • Performing in a multi-disciplined team to support the Operations team., • Initial calibration, routine calibration and maintenance of test and measurement equipment., • Assure that factory and proprietary test and measuring equipment is kept in line with current procedures., • Carry out calibration and repair tasks following departmental processes and procedures., • Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standardor, • Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.)and, • Develop clear and comprehensive calibration & maintenance records., • Experience in calibrating COTS/Special to Type Test Equipment, • Experience working on Environmental Stress Screening Facilities (ESS) is desirable., • Knowledge in calibrating electrical test equipment such as Power Supplies, Multimeters, Oscilloscopes, Function Generators, etc., • Understanding In-service Inspection and Testing of Electrical Equipment JBRP1_UKTJ

Our client, a trusted partner of the UK Ministry of Defence, is looking for a detail-focused General Operator to join their cutting-edge manufacturing team. This role is ideal for candidates with experience in microelectronics assembly, particularly those confident working under a microscope with extremely small components.You'll be part of a high-performing team supporting the production of advanced missile systems, with a focus on precision soldering and assembly of circuit card components. If you have a steady hand, a sharp eye, and thrive in a cleanroom-style environment-this is for you.Key Responsibilities: • Assembling and soldering microelectronic components under a microscope, • Following detailed manufacturing instructions and quality standards, • Supporting sub-assembly and certification processes, • Working across departments including PEC/CCA, looming, plastics, and stores, • Looming: binding wire looming is a cable assembly that efficiently distributes electrical signals by linking cables together using a crimping tool. (Ex; wiring, root wiring, soldering and fibre optics cabling),, • PEC and CCA Assembly, • Microelectronics, • Plastics Department (Ex; applying glues, cutting out intricate patterns, and moulding)., • Proven experience in microelectronics or fine-pitch soldering, • Comfortable working under a microscope for extended periods, • Strong manual dexterity and attention to detail, • Ability to read and follow technical layouts and instructions, • IPC 610 certification (preferred), • ESD training (essential), • Basic PC and Microsoft Office skills, • Experience utilising a soldering iron and working with manufacturing micro-components Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Join a national leader in security and fire solutions, as a Fire & Security Service Engineer. Service and maintain fire and intruder alarms to PD 6662 / EN 50131 requirements, including diagnostics on signalling paths and batteries, and maintain records to insurer/NSI expectations. Fire & Security S

As a Manufacturing Engineer Assembly & Integration, youll support unit and missile assembly manufacturing, working closely with production, quality, and engineering teams to deliver robust manufacturing solutions across multiple projects. Youll be responsible for translating design intent into clear, repeatable manufacturing processes, ensuring products are delivered on time, within cost, and to specification. Key Responsibilities: • Preparing and maintaining detailed Manufacturing Instructions to ensure accuracy and clarity for production teams, • Designing, commissioning, and validating tooling and fixtures to support production processes, • Supporting industrial validation activities, including FMEA and First Article Inspection (FAI), • Diagnosing and resolving technical issues encountered during manufacturing, • Updating route cards to reflect changes arising from rework activities, • Managing configuration control, incorporating design changes into manufacturing documentation, • Electrical / Mechanical Engineering or Manufacturing Apprenticeship (Advanced / Level 3)OR, • Level 3 academic qualification (ONC, Diploma or equivalent) AND, • Level 3 vocational qualification (NVQ)(NVQ not required where a Level 3 apprenticeship standard has been achieved)AND, • Ability to interpret design drawings and produce clear Manufacturing Build Instructions for skilled and semi skilled operators, • Proven experience in electronic sub assembly manufacturing, through to full system builds, • Hands on knowledge of assembly processes for small or miniature electro mechanical actuation systems, • Strong team player, able to collaborate effectively within a multi disciplinary environment, • Ability to understand and respond to customer and programme requirements, • Familiarity with working to company processes and procedures JBRP1_UKTJ

Management Consultant - National Security £Up to £65,000 GBP Onsite WORKING Location: London;Cheltenham;Bristol;Gloucester;Manchester, Central London, Greater London - United Kingdom Type: Permanent Join a global professional services organisation recognised by Fortune as one of the World's Most Admired Companies, reflecting a long-standing reputation for excellence, innovation, and high-performance culture. With a proven track record of delivering complex transformation programmes across government and secure environments, this organisation combines strategic advisory expertise with advanced technology and deep sector insight to solve some of the UK's most critical challenges. Key Details • Role: Management Consultant - National Security, • Location: London, Manchester, or Cheltenham, • Clearance Requirement: Active Enhanced Developed Vetting (eDV) (South), • Deliver workforce and organisational transformation programmes across National Security clients, • Advise, challenge, and coach senior stakeholders in secure government environments, • Lead structured, data-driven problem solving and root cause analysis, • Design and implement operating models and organisational structures, • Drive change management and cultural transformation initiatives, • Apply human-centred design principles to complex organisational challenges, • Own workstreams delivering measurable, value-focused outcomes, • Build trusted, long-term client relationships in secure environments, • Contribute to the growth of consulting capability within the National Security practice, • Develop a detailed understanding of client missions, strategic priorities, and operational constraints, • Translate complex National Security challenges into structured consulting engagements, • Identify risks and manage delivery across project and programme lifecycles, • Support proposal development and identify growth opportunities within accounts, • Collaborate with multidisciplinary teams spanning strategy, technology, and delivery, • Produce high-quality executive presentations and advisory materials, • Workforce Transformation, • Organisation Design and Operating Model design, • Change Management, • Leadership Development, • Culture Advisory, • Analytical problem-solving and continuous improvement, • Strategic thinking within complex, regulated environments, • Delivering consulting services within National Security, • Applying technology or data within transformation programmes, • Managing senior stakeholder relationships, • Supporting business development and account growth, • Active Enhanced Developed Vetting (eDV) (South) clearance Why Join as a Management Consultant - National Security?, • Join a consulting organisation recognised by Fortune as one of the World's Most Admired Companies, • Deliver transformation programmes that directly impact national resilience, • Work within a collaborative, high-performing National Security consulting team, • Access structured career progression within a global advisory network #aaon JBRP1_UKTJ

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. The Role: This role is part of our Sensor Systems Business Unit in Fareham. The Production Quality Engineer role requires experience in quality management within regulated industries, preferably defence or aerospace. The Quality Engineer will ensure compliance with quality standards, manage supplier audits, and support continuous improvement activities. Strong analytical and communication skills, along with knowledge of quality tools and regulations are essential. Key Responsibilities: Internal Quality Requirements: * Working knowledge of EN9100 / ISO 9001 quality management systems. * Experience supporting internal audits, corrective actions, and continuous improvement initiatives. * Proven ability to perform root cause analysis using tools such as 8D, 5 Whys, Fishbone, and fault tree analysis. * Experience managing nonconformances, deviations, concessions, and corrective/preventive actions (CAPA). * Ability to review and approve manufacturing processes, work instructions, and inspection plans to ensure quality requirements are met. * Experience with First Article Inspection (FAI) per AS9102 or equivalent standards. * Preferably knowledge of configuration management, drawing control, and change management (ECR/ECO). * Strong understanding of GD&T, engineering drawings, and specifications. * Ability to support production, engineering, and test teams to resolve quality issues and reduce defect escape. Supplier Quality Requirements: * Experience qualifying, auditing, and monitoring suppliers and subcontractors. * Ability to conduct supplier audits, including process audits and quality system assessments. * Experience managing supplier corrective actions (SCARs) and driving timely, effective resolution. * Knowledge of supplier risk management, including critical supplier identification and performance metrics. * Experience reviewing and approving supplier documentation such as inspection reports, material certifications, FAIRs, and CoCs. * Ability to work with suppliers to improve process capability, yield, and compliance. * Familiarity with flow-down of defence and customer quality requirements to suppliers. Compliance & Regulatory Requirements: * Understanding of defence industry regulations, including ITAR, EAR, and customer-specific requirements. * Experience ensuring compliance with contractual, regulatory, and customer quality requirements. * Ability to support customer audits, source inspections, and government quality representatives as required. Qualifications and Skills: * Bachelor's degree/HND in Engineering (Preferable) in a Mechanical, Electrical, Manufacturing, Quality, or related field. * 5+ years of experience in Product Quality, Manufacturing Quality, or Supplier Quality within a regulated industry (preferably defence, aerospace, automotive, medical devices, or similar). * Experience working in a defence or aerospace environment with controlled products and strict compliance requirements preferred. * Experience with Quality tools and software (e.g., SPC, MSA, PFMEA, control plans). * Experience in ERP/MRP systems and electronic quality management systems (eQMS). * Strong data analysis skills using Excel or similar tools. * Strong problem-solving and analytical skills with attention to detail. * Ability to work cross-functionally with Engineering, Manufacturing, Supply Chain, and Program Management teams. * Clear and effective written and verbal communication skills, including technical reporting. * Ability to manage multiple priorities in a fast-paced, highly regulated environment. * Willingness to travel to supplier sites as required. As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level, or have the ability to gain it.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role will be a part of our Saab Seaeye business in Fareham. This can be a 12 month FTC. In this role you will take responsibility for the full-lifecycle design and development of bespoke power conversion and transmission solutions in line with the company's business needs through innovation, creativity and professionalism. As Lead Engineer you will act as Technical Authority for concurrent power projects: from in-house designs to outsourced specification and management. Key Responsibilities: The role seeks an engineer with excellent knowledge of power architectures, transmission, conversion and distribution, whilst having an appreciation for the real-world subtleties involved in creating robust and reliable power systems. You may be working on anything from large-scale power conversion products, efficient cabled transmission designs all the way through to motor drives and low voltage converters. Our voltages range from 24V to 5000V with powers from 500W to 250kW. You will be responsible for the successful design, implementation and delivery into our products. This may include technically leading small multi-disciplinary teams and therefore the candidate must show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills. A product-focussed mindset is essential: taking a view across the different engineering disciplines to deliver the most appropriate solution. Our products provide unique challenges in designing non-conventional solutions which can meet size, weight and efficiency demands. Qualifications and Skills: Essential: • Significant Experience in Power Electronics, • Full-lifecycle experience: from concept to tested solution, • Self-starter: taking the lead and having a proactive mindset, • Excellent theoretical knowledge backed up by proven hands-on experience, • Proven knowledge of power transmission: AC and DC, applied to multi-km cabled solutions, • Proven Knowledge of DC converter topologies: Buck/Boost/Flyback/LLC/Full-Bridge, • Proven Knowledge of AC converter techniques: single phase/multiphase, power factor correction, • Experience of power converter product design AC-DC, DC-DC and DC-AC inverters, • Experience working with power switching devices: MOSFET, IGBT, SiCFET, GaNFET and associated drive circuitry, • Experience working with voltages up to 5kV and multi-kW powers, • Experience in designing or specifying custom transformer and magnetic components, • Experience using modelling and simulation packages, • Experience in both digital and analogue design concepts, • Experience of filter design and implementation, • Experience designing/specifying control systems for power conversion, • Knowledge of thermal management techniques, • Knowledge of design-for-compliance, • Experience developing requirements specifications and test procedures, • High Voltage Experience up to 5kV, • Thermal modelling experience, • Motor design principles and control techniques

Electrical Wiring Operator Calibration & Maintenance Location: Bolton | Defence Manufacturing | On-site Our client, a long-standing partner to the UK Ministry of Defence, is seeking an Electrical Wiring Operator to join the Calibration & Maintenance team on a 12-month contract at their Bolton site. This role supports critical manufacturing and test activity, requiring strong fault-finding capability, precision workmanship, and the ability to work to exact technical drawings in a regulated environment. Key Responsibilities • Diagnose faults and repair bespoke cable assemblies to drawing specifications, • Carry out surface-mount repairs on Circuit Card Assemblies (CCAs), • Maintain and repair test and measurement equipment to component level, • Perform Portable Appliance Testing (PAT) across site equipment, • Interpret technical drawings during fault-finding and repair activity, • Conduct safety system testing in line with documented procedures, • Support servicing of STTE during production test and repair phases, • Maintain tool control, FOD standards, and a clean working environment Essential Qualifications Applicants must hold one of the following: Preferred Skills & Experience IPC-620 certification and Dynamic Cabling training Proven electrical wiring and assembly experience Aerospace or defence manufacturing background Security & Eligibility British Citizen or Dual UK national with British citizenship BPSS clearance required prior to start What happens next Suitable applicants will be contacted for a structured screening call to assess skills and experience against role requirements. JBRP1_UKTJ

Electrical Fitter (Apprenticeship Trained)Defence Manufacturing | Bolton | Long term Contract£21.12£22.12 PAYE / £28.35£29.70 Umbrella | 37 hrs | MonFri | Onsite Are you an apprenticeship trained Electrical Fitter looking for stable, long term work, clean workshop conditions, and consistent day shift hours? This is an opportunity to join a well established defence manufacturing programme at a modern Bolton facility, working on high quality, mission critical products with clear processes, strong quality standards, and long term demand.________________________________________ The RoleAs an Electrical Fitter, youll be part of an experienced electrical manufacturing team, responsible for assembly, wiring, and certification of electrical products built to approved drawings and industry standards. Youll work in a structured, regulated environment where quality, safety, and right first time builds are key.________________________________________ What Youll Be Doing • Electrical assembly, wiring, soldering, and termination to drawings and build instructions, • Certifying your own work in line with product certification and quality procedures, • Using hand tools, jigs, fixtures, and electrical measuring equipment, • Carrying out self checks and inspections to ensure defect free builds, • Completing manufacturing and certification documentation accurately, • Working closely with inspection, test, and engineering teams, • Maintaining high standards of safety, ESD compliance, and housekeeping, • Completed electrical or manufacturing apprenticeship (Level 3 or equivalent), • Hands on experience in electrical wiring, fitting, assembly, or loom build, • Comfortable working to engineering drawings, specifications, and quality standardsDesirable (not essential), • IPC 610 and/or IPC 620 exposure, • Defence, aerospace, or other regulated manufacturing experience, • Advanced / Level 3 Electrical, Mechanical, or Manufacturing ApprenticeshipOR, • Level 3 academic qualification (ONC / Diploma or equivalent) AND, • Clean, modern working environment, • Onsite canteen, showers, and bike storage JBRP1_UKTJ

Location: Manchester/Lincoln Help shape the infrastructure that powers the UK's energy future. At Morson Praxis, we are the technical consultancy that actually delivers what it designs and our growing pipeline of power and energy projects needs strong civil engineering leadership to drive it forward. From new-build substations to grid modernisation, renewable generation connections and major electrical infrastructure upgrades, our teams are helping transform how energy moves across the UK. We are now seeking an experienced Power Civils Lead to guide multidisciplinary teams, deliver high-quality design solutions and support the next generation of engineers. If you are a senior civil engineer with deep experience in power networks, strong leadership capability and a passion for future-focused infrastructure, we want to hear from you. Who we are At Morson Praxis, we're more than just a consultancy, we're a team of innovators, problem-solvers and technical specialists who turn complex challenges into tangible results. As part of the wider Morson Group, we combine the agility of a dedicated engineering consultancy with the strength and stability of one of the UK's leading technical and recruitment organisations. Our Power Civils team are at the forefront of supporting the transition to a cleaner, more resilient electrical network. You'll join a collaborative environment where ideas matter, curiosity is encouraged and your leadership will have real impact. What You'll Do As the Power Civils Lead, you will take responsibility for civil engineering outcomes across multiple projects, ensuring quality, consistency and technical rigour. Your responsibilities include: • Leading, managing and developing a team of civil engineers and designers working across a diverse power project portfolio, • Overseeing design packages for substations, substation extensions/upgrades, onshore renewables and wider grid infrastructure, • Ensuring robust quality assurance, technical governance and design compliance, • Undertaking technical and feasibility studies, site investigations and engineering assessments, • Supporting bids, tenders and proposal development for new opportunities, • Providing on-site engineering advice and resolving project-based civil/structural issues, • Mentoring junior engineers and promoting knowledge sharing across the team, • Coordinating effectively with internal disciplines, external consultants, suppliers and clients, • Managing project budgets, resource plans and delivery schedules, • Identifying, communicating and managing design changes and associated impacts, • Utilising a range of civil and structural design software and digital tools to deliver efficient engineering solutions What We're Looking For • HND or Degree in Civil or Structural Engineering, • Ideally IEng or CEng, with membership of ICE, IStructE or similar, • Minimum 5 years' civil/structural design experience in substation or electrical infrastructure projects, • Strong background within the Electrical Transmission & Distribution sector, • Solid understanding of CDM regulations, • Good knowledge of UK Environmental and Waste Management legislation, • Detailed familiarity with National Grid Transmission Procedures, particularly:, • TP106, TP135, TP137, TP141, TP153, TP184, TP188, TP219, TP221, TP235, TP241, • Proven ability to supervise, mentor and lead technical teams, • Strong communication and stakeholder engagement skills, • Ability to balance technical detail with project-level oversight and delivery Why Praxis? • Lead meaningful projects: Shape critical UK energy infrastructure and support the transition to a low-carbon grid., • Collaborate: Work alongside experts from civil, electrical and digital engineering disciplines., • Grow your influence: Lead teams, shape standards and drive continuous improvement within a growing power discipline., • Make a real impact: Your work will directly support energy security, resilience and sustainability., • Belong: Benefit from the wider Morson Group's career pathways, training and professional development. What's in it for you: • 26 days annual leave plus bank holidays, • Full support and guidance towards chartership, • Company funded professional memberships, • Family-friendly policies including enhanced maternity, paternity and adoption leave, • Life assurance scheme, • 24/7 GP Access, • Funded team socials and events, • Mega-projects throughout the UK and internationally, • Employee Assistance Plan, • High street discount scheme, • Enhanced company sick pay scheme, • Mental Health Wellbeing app, • Specsavers discount scheme Morson Praxis is proud to be an equal opportunities employer: We value diversity and are committed to fostering an inclusive, respectful, and supportive working environment where everyone can thrive. We welcome applications from all individuals and make our employment decisions based on merit, qualifications, and business needs, regardless of age, gender, disability, ethnicity, religion or belief, sexual orientation, or any other protected characteristic. JBRP1_UKTJ

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Saab Seaeye Underwater Robotics Business. This is an exciting opportunity to provide hydraulics technical expertise to undertake and support the configuration, specification, sale, production and technical support of subsea hydraulic products for Saab's range of robotic underwater vehicles. Key Responsibilities: • Define and develop configurable solutions that fulfil customer requirements for systems comprising a wide range of electro-hydraulic products manufactured by Saab Seaeye and third parties, • Identify specific products to form subsea hydraulic systems and define the interfaces / fittings, hoses, QDs etc., • Define high level requirements for the product and the associated supporting equipment - working with the supply chain for new purchases, partnerships & providing specifications to engineering teams, • Help to prepare Cost Time and Resource requirements and system quotations for the above, • Draw configuration diagrams in VISIO to communicate system solutions to internal and customer stakeholders and create detailed parts lists, • Support ROV system sales and after sales teams with hydraulics expertise, • Provide technical support for internal production and external customers - advising on fault finding / troubleshooting, • Contribute towards the sales process of all hydraulic products and systems, • Research customer current opinions and future requirements, directly and via the sales and business development team, • Develop strong, long term relationships with clients and work to provide the best possible service Essential: • Degree in relevant Engineering discipline., • experience in engineering, specification and design of Hydraulic systems, with a strong understanding of hydraulic circuit design comprising: Pumps, valves, motors, cylinders, control systems, hoses, fittings and adaptors etc., • ROV or Subsea hydraulic systems product knowledge - Subsea HPU's, valve packs, manipulators, comps etc., • ROV tooling., • Able to draw hydraulic schematics using 2D Autocad.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our Saab Seaeye Business Unit on Fareham. The Stores Team Leader is responsible for providing effective direction and supervision to all stores and packing team members to ensure that delivery deadlines and master schedules are met. This role is also accountable for ensuring stock accuracy and driving continuous improvement initiatives within the warehouse operation. Key Responsibilities: • To plan, allocate, organise and prioritise staff, so all stores activities are completed in a timely manner in line with master schedules and sales deadlines., • To lead and sustain 6S practices within the stores and yard, promoting safety, organisation, cleanliness, and operational efficiency., • To lead and enforce health and safety standards, including COSHH regulations, ensuring a safe working environment and compliance with all statutory and company requirements., • To lead the timely and accurate processing of Sales Orders, Stores Requisitions, Work Orders, and Repair Work Orders, ensuring effective supervision of kitting activities, accurate transaction control within MRP, and adherence to customer deadlines., • To lead and sustain an ABC cycle counting process to drive inventory accuracy, accountability, and effective stock rotation (FIFO), while managing relationships with offsite storage stakeholders, • To lead and manage line-side stock locations to ensure material availability, accuracy, and efficient replenishment., • To monitor fast and slow-moving stock, optimise bin locations to improve storage efficiency and material flow, report inventory values to finance stakeholders as required, and assist with end-of-year stock audits., • To oversee all shipping activities, ensuring every Sales Order is packed to a high standard and all associated documentation is accurate and compliant., • To provide FLT/Wave assistance as required, ensuring operators are properly trained, equipment is proactively maintained, and machinery is available for store operations., • To lead performance management by monitoring KPI's, achieving targets, and driving continuous improvement in processes and procedures., • To lead and support the implementation of a lean stores function, contributing ideas to improve efficiency, organisation, and workflow., • To coach and develop staff through regular 1‑to‑1s, performance reviews, and IPM fostering accountability and continuous improvement., • Minimum of 5 years' experience leading a team in a lean manufacturing environment, with demonstrable knowledge of warehouse operations, materials management, and continuous improvement practices., • Knowledge of MRP/ERP Stock control and logistics systems and supply chain processes with a strong understanding of Bill of Materials (BOM) accuracy, ensuring parts and materials are correctly aligned with production requirements., • Computer Literate - Word and Excel, • Strong understanding of modern warehouse and materials management processes. Stock rotation principles, • Knowledge of 5S, Lean, and ABC cycle counting principles., • Basic understanding of FLT/Wave truck operations and safe material handling procedures., • Awareness of health, safety, and environmental regulations in a warehouse setting., • Experience handling electrostatic-sensitive (ESD) components and full compliance with health & safety regulations in a manufacturing or warehouse environment., • Experience in monitoring KPI's and driving continuous improvement initiatives., • Demonstrable experience in coaching, developing staff, and managing performance., • Strong leadership and people management skills., • Excellent organisational, planning, and problem-solving abilities., • Excellent written and verbal communication skills, with strong interpersonal abilities to effectively interact with team members and other departments., • Ability to work under pressure and meet deadlines., • Attention to detail and commitment to accuracy in inventory and documentation., • Comfortable working at heights of up to 4.5mtrs, • Excellent communication and interpersonal skills., • Ability to work under pressure and meet deadlines., • Analytical and problem solving mind-set with a focus on continuous improvement.

Missile Test Architect Test Equipment & Systems (Defence) Location: Bolton, Greater Manchester Sector: Defence / Advanced Manufacturing As a trusted partner to the UK Ministry of Defence, our client is seeking an experienced Missile Test Architect to support the delivery of advanced missile systems. Increase your chances of an interview by reading the following overview of this role before making an application. This role is ideal for accomplished test equipment engineers ready to progress into system and sub-system leadership, influencing complex programmes from concept through in-service support. You will own the end-to-end test equipment strategy, shaping test architectures, managing requirements, and overseeing development through delivery and operational use. Reporting to the Chief Design Engineer, you will act as the technical authority within multidisciplinary engineering teams, helping define built-in test capability, production testing requirements, and the specification and delivery of missile test equipment. Key Responsibilities Define and implement the overall project test strategy Define and implement Built-In Test (BIT) architecture, including coverage requirements, timings, and system-level routines Specify missile factory pass-out testing to ensure correct build and support manufacturing with effective test stages Define in-service test routines for missile systems Generate and manage compliance to lower-level test requirements for design teams, including: Test access requirements BIT coverage and timings Factory test functionality Analyse and model systems to understand test coverage and generate diagnostic instructions Propose and recommend cost versus test-coverage trade-offs in collaboration with the Chief Design Engineer Produce, maintain, and deliver plans for activities within your area of responsibility Provide technical leadership across internal teams and sub-contracted activities Skills & Experience Essential Degree qualified in Electrical, Electronic, or Test Engineering or equivalent industry experience Substantial experience in test equipment, test systems, or test architecture Strong technical background in: Digital electronics and microprocessor-based systems Analogue electronics Power electronics Proven experience in test equipment design Experience using DOORS for requirements management Ability to operate as a technical authority within complex engineering programmes Desirable Experience within defence, aerospace, or other highly regulated engineering environments Exposure to system-level or sub-system leadership roles Understanding of production and in-service test strategies Key Competencies Good understanding of project management, planning, cost, and budget control Ability to manage diverse and sometimes conflicting stakeholder requirements Strong influencing skills with engineers, managers, and senior stakeholders Capability to technically manage internal teams and external suppliers Determination, resilience, and a strong drive to deliver Excellent written and verbal communication skills Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. xrnqpay Amenities like an onsite canteen.

Proven AI Cyber Security Consultant role available for an individual who has deep AI and Security Assurance and Governance experience. You will act as an AI Security Consultant to support our client in providing them with real-time support in keeping their national critical infrastructure secure, as

Goods Inwards / Incoming Quality Inspector (Stores & Manufacturing) Bolton | Onsite | Defence Manufacturing Why apply? An opportunity supporting a major UK defence programme Clearly defined role focused on goods inwards & stores inspection (not bench/final inspection) ________________________________________ The opportunity As a trusted partner to the UK Ministry of Defence, our client is seeking an experienced Goods Inwards / Incoming Quality Inspector to join their established manufacturing site in Bolton. This role is critical to ensuring all incoming materials and components meet purchase order, contractual, and quality requirements before entering production. You will play a key part in protecting compliance, supporting manufacturing schedules, and maintaining the highest standards within a safety critical, regulated environment. ________________________________________ What youll be doing Inspect and verify all incoming goods against purchase orders, delivery notes, and quality documentation Formally accept procured products in line with approved standards and contractual conditions Read and interpret engineering and assembly drawings, including dimensional tolerances and machined features Inspect components for damage, surface finish, paint defects, and first off requirements where applicable Complete, maintain, and update accurate inspection and quality records, ensuring full traceability Validate delivery paperwork and system entries to support audit and compliance requirements Meet agreed inspection turnaround times to support manufacturing demand Identify, segregate, and control non conforming material, raising and maintaining NCRs as required Support product verification and approval activities, including audits and PCB inspection where applicable Maintain compliance with manufacturing, quality, and safety procedures while contributing to a safe, organised working environment ________________________________________ What were looking for Essential experience Proven goods inwards, incoming inspection, or stores inspection experience within a manufacturing or regulated environment Strong understanding of inspection requirements for safety critical components Experience managing receipt, verification, traceability, and non conformance control Confidence working with inspection documentation, delivery paperwork, and quality records Please note: This role requires goods inwards / stores inspection experience. Final or bench mechanical inspection experience alone is not suitable. Qualifications (one of the following) Level 3 Electrical/Mechanical Engineering or Manufacturing Apprenticeship, or Level 3 Electrical/Mechanical Engineering or Manufacturing qualification (e.g. NVQ, ONC, Diploma or equivalent). Qualifications must meet the required standard for the role. Additional skills Manual handling and ESD awareness SAP experience is desirable but not essential ________________________________________ Security clearance British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. ________________________________________ About the site The Bolton facility is one of the North Wests leading manufacturing sites, supporting defence programmes for over 25 years. The site offers: Onsite canteen Free parking, showers, and bike racks Convenient motorway access ________________________________________ What happens next? Once you apply, and if your application meets the selection criteria, a member of the talent acquisition team will contact you to arrange a structured screening call. This conversation will explore your experience and suitability for the role in more detail. TPBN1_UKTJ

As a Management Consultant - National Security, you will shape and deliver workforce and organisational transformation initiatives within highly secure National Security environments. Deliver workforce and organisational transformation programmes across National Security clients. Why Join as a Manag

Asset Manager, Hybrid working (3 days on site) Our client, an industry leading and national business, is looking to hire an experienced Asset Manager to build a new Asset Management practice. This is a pivotal role within our clients security programme. The successful candidate will ensure strong alignment between Asset Management and Configuration Management, driving accurate asset visibility, lifecycle control, compliance, and data integrity across the technology estate. Please note, engagement via Umbrella Company Only; all taxes & NI deducted at source. Want to make an application Make sure your CV is up to date, then read the following job specs carefully before applying. Hybrid working - 3 days per week on site in Manchester. General responsibilities: - • Define and establish an Asset Management strategy incl. policies and operating model, • Embed governance supporting CIS Controls, • Design and implement end to end asset lifecycle processes, • Align Asset Management with CMDB data models and tooling, • Proven experience building or transforming an IT Asset Management (ITAM) capability, • Strong knowledge of ITIL and Service Management practices, • Experience working with CMDB platforms., • Understanding of CIS Controls and security governance Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. xrnqpay If you need any help or adjustments during the recruitment process for any reason, please let us know when you apply or talk to the recruiters directly so we can support you. Remote working/work at home options are available for this role.

Bolton An exciting opportunity has arisen to join an Export New Business and Delivery Team supporting the delivery of strategically important export programmes. The role is ideal for someone with a background in engineering, systems integration, project engineering or technical delivery who is looking for a challenge and wants to broaden their experience in a fast paced, customer facing environment Salary: Circa £ 65,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Being an integral part of the team, you will help manage the complex and challenging technical interface between the company and the Export customer, including the Combat System and Platform Integration of a complex weapon system on to a maritime platform. You will further play an important role in helping to deliver the technical scope of Sea Ceptor export contracts, working at the intersection of engineering delivery, customer engagement and programme execution. You will support the Head of Export Engineering Delivery in delivering the technical elements of specific Export contracts, ensuring that customer requirements are understood, internal teams are aligned, risks are managed and the contractual scope is delivered. Work to ensure customer requirements, sequencing and contractual scope are understood across engineering teams Support the coordination and resolution of technical issues by ensuring that export customer requirements and needs are considered Support customer discussion on the technical solution, delivery process and sequencing to ensure alignment and protect contractual scope Prepare clear technical summaries and briefing packs by interpreting engineering outputs for internal and external audiences Assist in developing Statements of Requirement and Statements of Work, gathering and aligning inputs from subsystem teams Capture lessons learned and support continuous improvement across current and future export contracts When required support the New Business Team and the MBDA Sales and Business Development Team in the generation of new costed proposals and negotiating new Sea Ceptor contracts, particularly focussing on the Statement of Work and Product Specification.What we're looking for from you: Experience in working in complex and technically challenging defence programmes An ability to act with a high degree of autonomy to deliver complex programmes with an ability to manage multiple stakeholders working with ambiguity. Strong organisational and coordination skills with the ability to manage inputs from multiple subsystem teams The confidence to interpret and communicate technical information clearly, both internally and to overseas customers Strong relationship building and influencing skills to align internal teams understanding and ensure delivery against contractual scope Awareness of commercial and contractual considerations and how technical decisions influence cost, schedule and scope. When required ability to travel both with in the UK and overseas Preferably strong knowledge of products and domain of operation including an understanding of Combat System and platform IntegrationOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-LA1

Bolton This role offers a fantastic opportunity to broaden your interpersonal and technical skills whilst working on complex and varied projects. You'll be working with highly talented and motivated colleagues in a friendly and supportive environment whilst enabling your personal and professional development! Salary: Circa £55,000 depending on experience Location: Stevenage or Bolton sites (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: Our PCB Layout team is responsible for providing a full PCB Layout Service to all Internal Programmes. These span all technologies from PTH boards to complex multilayer, rigid/flexi-rigid, surface mount, impedance matched, RF etc. This is a unique and exciting opportunity to develop your technical skills across our broad range of products. You'll be working closely with engineers and PCB suppliers developing complex PCB Layouts based on technical requirements (electrical, mechanical, thermal and environmental). This can entail developing and adapting emerging technologies to meet our high reliability requirements, whilst maintaining a high production yield, delivered on time, on cost, on quality. You'll also mentor and participate in knowledge sharing with other team members playing an active role in their own and your development. Should you wish to be based out of our Bolton site, regular travel to our Stevenage site will be required to meet with our design team, project designers and fulfil your training needs. This is an essential requirement. What we're looking for from you: Extensive/specialist experience in one or more areas such as RF/High speed/Analogue/Power/SI or EMC Good negotiation and influencing skills to ensure design requirements are suitable for production processes Ability to lead and support design reviews as well as new technology introductions both national and international. Substantial knowledge and experience of PCB design and best practices for PCB layout for high reliability products. Substantial knowledge of PCB fabrication processes and technologies (materials, stack-ups etc.) Strong communication skills to facilitate regular face-to-face and electronic communications with all relevant stakeholders including our international partners.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton Join the Land Ceptor team and work to support the British Army in realising the full potential of its latest Ground Based Air Defence capability and tailoring this capability for the needs of emerging export customers. In either case, you'll be building on world-class design: incorporating new ideas, functionality and technology to deliver to our customers. Salary: Circa £48,000-£53,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: As part of the Physical Systems Design & Certification team, you will help manage the overall physical functionality and certification of the in-service system while supporting the evolution of the weapon system for future customers. What we're looking for from you: A highly motivated self-starter who can work both independently and as part of a team on a number of varied tasks A good understanding of systems engineering principles, processes and practices An appreciation of requirements engineering at System, Subsystem or Component level Knowledge associated with the design and build of hardware Awareness of test procedures required to verify products and the gathering of evidence to enable certification (experience working with defence standards, Mil Spec, etc. ideal, especially environmental and EMC) Experience preparing and conducting ground trials and gathering evidence from physical activities would be advantageous Confidence in presenting technical engineering information and promoting decision making Experience of technical report writing and use of configuration management tools A Logical approach to problem solvingWhat's in it for you? The opportunity to be instrumental in the evolution of the Land Ceptor system for both UK and export customers The ability to grow your career within a wide engineering sphere with an exposure to all stages of the engineering product lifecycle A challenging and varied scope of work with a good mix of short and long term objectives Opportunities for short term UK and European travel You will be responsible for defining, reporting and managing the workload in this areaOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Electrical Inspector Defence Manufacturing Location: Bolton, Greater Manchester Our client, a highly respected UK Ministry of Defence partner, is seeking an experienced Electrical Inspector to join their manufacturing team in Bolton. This role is key to ensuring the quality and certification of electrical hardware used in critical defence programmes. You will work in a structured manufacturing environment, supporting product certification and maintaining the highest standards of workmanship and compliance. Key Responsibilities Certify products in line with defined processes and procedures Inspect electrical assemblies to confirm correct build, connections, and finish Identify physical damage, surface defects, or deterioration Carry out intermediate inspections and non-product certification checks Monitor operators within the Product Certification Scheme Complete and certify manufacturing documentation and manage non-conforming items Produce inspection and quality records and use specialised inspection tools Support audits and ensure ongoing compliance with manufacturing standards Skills & Qualifications Essential Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard or Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) and Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved Proven experience inspecting the work of others Several years experience in a skilled manufacturing or inspection role No colour blindness Desirable IPC-610 and IPC-620 certification or training Manual handling and ESD training Strong attention to detail and quality standards What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

Our client, a trusted partner of the UK's Ministry of Defence, is seeking an experienced Manufacturing Engineer with expertise in Assembly and Integration, particularly in circuit card assemblies. Based within the unit and missile assembly manufacturing facility, you will play a key role in ensuring products are built efficiently, on time, and within budget. As a vital member of the Manufacturing Engineering team, you will provide support across multiple projects, contributing to the successful delivery of high-quality manufacturing solutions. Key Responsibilities: Prepare and maintain detailed Manufacturing Instructions to ensure accuracy and clarity. Design, commission, and validate the necessary tooling for production processes. Support industrial validation activities, including FMEA and First Article Inspection (FAI). Diagnose and resolve technical issues encountered during manufacturing. Update route cards to reflect changes resulting from rework activities. Manage configuration control by incorporating design modifications into manufacturing documentation. Assist with the Non-Conformance process, utilising SAP for tracking and resolution. What do you need?: Qualification Requirements: Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard"or" Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.)"and" Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved (These qualifications must meet the standard to be considered for the role). "or" BEng Degree in a relevant Engineering subject. Skill Requirements: Ability to interpret design drawings and produce precise Manufacturing Build Instructions for both skilled and semi-skilled operators. Proven experience in electronic sub-assembly manufacturing through to full system builds. Knowledge and hands-on experience of assembly processes for small or miniature electro-mechanical actuation systems. Strong team player with the ability to collaborate and contribute effectively within a group environment. Ability to understand and respond to customer requirements. Familiarity with and adherence to company processes and procedures. Excellent communication skills, capable of engaging effectively within the team and across various organisational levels. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

Bolton An exciting opportunity within Component Engineering team to help shape and play an important part in support across the business. No two days are the same supporting a large network of teams within the business. Salary: Circa £ 48,000 depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As MBDAs mission to stay at the forefront for Electronics, Electrical, Mechanical & Materials commodities an exciting opportunity has arisen to join our Components team and lend your expertise. You will play a critical role in managing Electronic Components, assessing market trends and technical risks. The role demands a passionate professional who can lead in an Electronics or RF semiconductor specialism. The role requires technical advisement to a large amount of stakeholders across the business from Projects, Engineering teams, Procurement, Customer Service Support and many more. You will be accountable for providing Technical advice and reporting on risks, working with suppliers and understanding the needs within MBDA to suit the requirement of our ever-evolving business needs. As the Principal Electrical Component Engineer, you will maintain your expertise in specialist areas and ensure that this expertise is effectively passed to others, including participating in design reviews, training and other development activities, as appropriate, enabling MBDA to maintain its capability. There is also the opportunity to support and lead international collaboration within the company, helping define best practice and manage the adoption and adherence of agreed methodologies The Component Engineering team you will be a part of has been vital to our product delivery by providing highly sought after subject matter expertise when it comes to the individual's relevant commodity experience. The team operates from both Stevenage and Bolton sites, representing a diverse group of friendly supportive colleagues who pull together when needed to achieve our mission. What we're looking for Knowledge or experience within an electronic component discipline. Knowledge of electronic suppliers especially in semi-conductors Appreciation of REACH and RoHS regulations. Strong communication skills both written and verbal. Pro-activeness and self-motivation to improve self, improve process, and get the job done. It would be advantageous if the candidate has worked in supply chain and knowledge of Electrical and electro-mechanical products. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a key role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Salary: Up to £43,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a key role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of Electronics. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can also help to shape the design of the products and test equipment, delivering support to our customers What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Someone who has a record of accomplishment of on-time delivery Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions.Proven design experience in one or all of the following disciplines:- Digital & Analogue Electronics Power Electronics RF and Antenna Design Interconnects Safety Electronics RF Test and measurement principle knowledge Test SystemsOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

An exciting opportunity for an experienced Manufacturing Test Engineer to join our Circuit card assembly Engineering team. This is a fast-paced but friendly and inclusive Manufacturing environment that will challenge you Salary: Circa £45,500 depending on experience Dynamic (hybrid) working: 4 or 5 days per week on-site due to workload classification Security Clearance: British National Only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As part of our continued growth, we are looking for a highly skilled and methodical Electronics Manufacturing Test Engineer to join our Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be crucial in accurately identifying root causes of failure, providing technical reports and supporting the implementation of corrective actions, which in turn will be utilised to improve production yield and ensure programme targets are achieved. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to time served experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. Key Responsibilities: Technical Root Cause Analysis:Performing fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. Test Specification/Instruction Generation:Supporting the introduction of new test facilities by generating test specifications, operator instructions, and maintaining appropriate configuration control. Cross-Functional Collaboration:Serving as a key point of contact, collaborating closely with Manufacturing, Quality, Process, Design Engineers, and other stakeholders to overcome technical challenges and drive product improvements. Design & Development Support:Providing crucial Test Engineering input during the design and development phases, from initial concept through to Production Readiness Reviews.What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 AND Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject)OR BEng/BSc in relevant Engineering/Technical Degree Expertise in Electronics Test & Diagnosis:A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Test Equipment Experience:Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Manufacturing Systems Proficiency:Familiarity with enterprise resource planning, manufacturing execution and version control system tools (e.g., SAP, MES, PLM) for logging test activities and generating non-conformance quality reports. Desirable Experience working with RF-based circuitry would be preferable, but is not mandatory.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton Salary: £35,000 -£57,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: An opportunity to join the team delivering MBDAs future anti-ship / deep strike capability integrated in the Maritime domain. This is working as part of the wider Mission Planning & Control team developing future deep strike / anti-ship capability. This is a role which requires good systems engineering skills and an enthusiastic approach to work with scope to expand responsibilities as the programme progresses. This role pushes MBDAs Mission Planning function beyond its traditional areas of interest so provides an exciting opportunity to grow capabilities and develop valuable expertise. The role covers: Working within the team delivering the Maritime Anti-Ship / Deep Strike Mission Planning (Maritime MP) product and engaging with the wider Mission Planning team Supporting the Maritime MP product owner to create the Maritime variant Working across the whole systems engineering lifecycle from requirements elicitation through to testing and delivery Generating and contributing to key engineering artefacts and design reviews Developing design within the systems architecture model Working with software and algorithm functional teams within the programme Opportunity to engage with end users and customersThis role provides the opportunity to contribute to a key strategic defence project, as well as being able to get hands on as the product progresses. What we're looking for from you: We are looking for a Systems Engineer who can actively contribute to the delivery of key milestones and engage with a wide range of stakeholders. Desired skills and experience include: Proactive approach to engineering challenges Systems Engineering capability and experience Good technical problem solving skills Ability to communicate effectively within cross functional teams Appreciation and understanding of working within a MBSE approach Experience with engineering tools and configuration control Experience delivering maritime systems or working within the maritime environment is highly desirable An appreciation of the software development lifecycle.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

We are seeking an experienced and highly motivated Principal Product Assurance Engineer to join the Quality Assurance team in Bolton, providing support to the Manufacturing teams. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4 - 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: Facilitating practical problem solving activities, determining root causes and the effective implementation of robust corrective actions using the relevant quality tools Carrying out of process audits, issuing non-conformances and facilitating root cause and corrective actions Frontline provision of non-conformance management supporting the manufacturing functions, including the administration of non-conformities and containment activities Collation and analysis of non-conformance data through the business tool, Google NLP, highlighting any adverse trends and risks to the business and highlighting opportunities for improvement. Managing customer concerns and escapes, dealing with Inter company facilities across Europe including France, Italy and Germany and external customers Managing inscapes between business units within manufacturing Interface with the programmes quality representative and the wider quality teams, sharing data packs and progression of non-conformities and improvements Approval of FAI's, C of C's and other product related documents where required Supporting the successful transfer of new products into manufacturing, verifying PFMEA's, Risk register actions and supporting Industrial Validation activities What we're looking for from you: Able to demonstrate relevant work experience ideally backed up with qualifications Demonstrate excellent analytical skills with the ability to use data to identify trends and drive improvements Electrical / electrical test experience would be an advantage Ability and confidence to report to all levels of the business Strong practical problem solving skills being able to lead and facilitate activities leading to improvements Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunitiesThe opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton Are you passionate about executing and managing critical and complex supplier subcontracts? Do you have experience of providing work collaboratively with UK and/or international suppliers whilst protecting the commercial position? Salary: Circa £ 48,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: Working within Major Equipment Procurement (MEP), you will partner with our suppliers around the world and enable MBDA to provide world-leading defence capabilities for our Home Nations and their Allies. You will lead the preparation, negotiation, implementation and performance of subcontracts across the entire life cycle of missiles and missile systems. You will ensure that contracts are effectively managed to time, cost, and quality resulting in the delivery of high value and sophisticated sub-systems. You will need to provide commercial guidance to internal customers and manage risk and opportunity to safeguard the interests of MBDA. Key activities on a day-to-day basis can vary between individual roles, but expected activities you are likely to complete: Preparation and execution of subcontracts, either with existing partners or as a result of running tendering activities Oversee subcontract amendments to ensure they remain topical and in compliance with latest contracting standards and legislation Undertaking performance management activities to ensure that suppliers deliver in line with subcontract obligations Develop and nurture strong supplier relationships with suppliers within the UK, Europe and the rest of the world Identify and mitigate commercial and business risks relating to the suppliers which you are responsible for Obtain quotations and other critical intelligence from suppliers which enable MBDA to bid for new businessWhat we're looking for from you: MEP provides a collaborative, team-focused environment where multitasking is a key skill. This is a really key role, and we need people who can help us be successful by taking requirements and problem solving with tangible solutions. There will be ample opportunities for you to develop within the MEP team and across the wider procurement business. You will be required to travel to our suppliers in the UK, Europe and potentially internationally. You'll be keen to learn or bring experience in procurement subcontract management, e.g. negotiation, contract and terms and conditions Be able to problem solve daily and skilled at finding a resolution Keen to provide continuous support and co-operation to senior internal and external customers Continually improve opportunities, analyse situations and present possibilities, whilst balancing riskOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-LA1

Bolton An opportunity has arisen for a dynamic and self-driven Environmental Advisor to join the MBDA team, the role covers the UK and can be based at any of our sites. If you are passionate about environmental issues and reducing our impact on the environment, this challenging but rewarding position may be for you. Salary: Circa £46,000 dependent on experience + bonus + benefits Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. The opportunity: The successful candidate will be providing expert guidance on environmental compliance. Ensuring that the Company SHE policies and procedures are effectively implemented while helping to develop a SHE culture of continual improvement. You will work closely with a number of departments in the business, including ESG, engineering, manufacturing, facility maintenance and security. You will have the opportunity to gain practical and professional experience in a challenging sector. What we're looking for from you: Ideally degree (or equivalent) in Environmental Science, Environmental Management, Sustainability, or related discipline. Significant experience and expertise in environmental management systems Broad understanding of manufacturing and laboratory technologies. Knowledge of environmental legislation, its application and interpretation relevant to MBDA operations. Experience in conducting internal audits for ISO 14001 Ability to influence and engage employees at all levels in the organisation. Excellent communication skills, ability to translate complex information into easily understandable formats. Flexibility to travel to our UK sites where required. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-ST1

Company Description Assystem is an international company with one mission: accelerate the energy transition around the world. Every day, our 8,000 switchers located in 13 countries (Europe, Middle East, Pacific Asia & Africa) connect their six thousand billion neurons to tackle the task of the century: switching to low-carbon energy. We are a collective committed to making the energy switch. Sharing our knowledge, expertise and values allows us to innovate and think differently about the energy transition. Drawing on more than 55 years' experience in highly regulated sectors subject to strict security and safety requirements, we provide our customers with engineering and project management services, as well as digital services and solutions to optimize the performance of complex infrastructure projects throughout their life cycle. The Group is currently ranked second in the world for nuclear engineering. We aim to ensure a viable, efficient, and reliable energy future for all. Job Description About Assystem At Assystem, our mission is to accelerate the global energy transition. Our 8,000 Switchers blend world-class engineering expertise with digital innovation to shape the future of low-carbon power. Join us as we deliver pioneering nuclear and energy projects that make a real global impact. Why Join the Community of Switchers? By joining Assystem, you’ll be part of one of the top three largest independent nuclear engineering companies worldwide. You will work on major projects that redefine what’s possible in nuclear and energy infrastructure, alongside a community of experts committed to advancing the future of clean energy. The Role We’re looking for a dynamic Business Development Director to lead and grow strategic client relationships, identify new business opportunities, and drive Assystem’s market position within the UK and global energy sectors. This senior role is critical to shaping our business strategy, expanding our client network, and ensuring our continued success in a rapidly evolving low-carbon landscape. The role can be based from any of our UK offices, but will require a degree of travel across the UK and occasionally internationally. Key Responsibilities Develop and implement comprehensive sector and market plans to support strategic growth. Build and maintain relationships with key clients, partners, and industry stakeholders. Identify new business opportunities and lead proactive pursuit activities across energy sectors. Collaborate with internal teams to align business development initiatives with delivery capability. Lead and contribute to bid strategies, ensuring competitive positioning and client alignment. Manage strategic accounts to ensure profitability and long-term partnership value. Represent Assystem at industry events and contribute to thought leadership through publications and presentations. Stay informed of market trends, emerging technologies, and policy developments to inform business strategy. Qualifications About You Proven track record in business development or client relationship management, ideally within the energy, engineering, or infrastructure sectors. Strong understanding of market dynamics and strategic planning. Skilled in building partnerships and influencing at senior stakeholder level. Experience leading bids, proposals, and capture plans for complex technical projects. Commercially astute, with a focus on achieving sustainable and profitable growth. Excellent communication, negotiation, and presentation skills. A collaborative leader who thrives in a fast-paced, purpose-driven environment. If you’re ready to help shape the future of low-carbon energy and play a pivotal role in Assystem’s growth journey, we’d love to hear from you. Apply now and become a Switcher. Together, let’s engineer a cleaner, brighter future. Additional Information Why Join the Community of Switchers? Join one of the top three largest nuclear engineering companies globally and be a part of a dynamic team driving energy transition. At Assystem, we offer a multicultural environment, career progression opportunities, and the chance to work on industry-leading projects that make a real difference in the world. Please be aware that many roles at Assystem are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future. We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Our client, a trusted partner to the UK Ministry of Defence, is seeking an experienced Supplier Planner to enhance and well-developed Supplier Planning activities aligned to Oliver Wight Class A standards. This role works closely with Manufacturing Operations, Procurement and programme teams to drive supplier performance. You will own defined supplier categories, improving on time delivery and inventory optimisation, with OTD performance central to effective planning. Key Responsibilities: Conduct supplier visits, participating in operational reviews and sharing performance KPIs. Apply MRP planning expertise and Material Master knowledge to support continuous improvement in supplier planning activities. Join the organisation during a period of growth, with opportunities to collaborate across a wide range of stakeholders and make a meaningful impact. Become part of a collaborative, supportive team committed to achieving shared objectives. Benefit from regular on-the-job training and ongoing development opportunities to further build your knowledge and skills. You will be a key member of the ISP-S Sub-Assemblies team, working closely with Buyers, Supply Chain Managers, Industrial Engineers, Sector Leads, Manufacturing Planners, and the Supply Chain Excellence team. What do you need?: Proven experience working within an MRP or similar planning environment in a manufacturing setting. Strong data literacy, with the ability to identify data inaccuracies, investigate root causes, and implement corrective actions. Experience with SAP is desirable; however, comprehensive training will be provided where required. Results-driven and culturally aware, with excellent collaboration skills and the confidence to influence and drive decisions across the supplier base. Flexibility to visit suppliers and attend the Stevenage site to engage effectively with key stakeholders. Experience managing suppliers against scheduled orders and fixed purchase orders (POs). Background working both within manufacturing environments and directly with suppliers, demonstrating the ability to negotiate and deliver to agreed deadlines. A strong understanding of core supply chain KPIs and performance metrics. A continuous improvement mindset, bringing bright ideas, best practices, and transferable experience to the role. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

Bolton We have an opportunity working on behalf of UK Facilities Management, the Operational Technology (OT) Risk Manager will act as the deployed local security leader and expert in all elements of security for General Infrastructure Management Systems (GIMS) policy. Salary: Circa£60,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification and frequent travel to all sites across the UK Security Clearance: British Citizen or a Dual UK national with British citizenship/Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: The main focus is the creation, execution and maintenance of a framework to identify and address risks associated with the devices which support MBDA's Building and Infrastructure across the UK. This will also include input into the wider group structures as and when required. The OT Risk Manager will act as the point of contact for all new, existing and legacy GIMS installations, providing advice, guidance and direction to address the multiple security risks associated with them. This includes liaising with cross business teams outside of FM, such as Cyber and InfoSec, IM and Product Cyber. The OT Risk Manager will oversee all change management activities related to the connectivity and digital interfaces of the relevant infrastructure, ensuring all change remains appropriate and complaint with policy; ensuring an evidenced position is constantly maintained by MBDA UK of continued compliance with all relevant standards which may be subject no-notice audits by MBDA Group, MOD and other customers. They will deliver technical security consultancy to the business including architecture and solution suitability to meet a complex suite of business requirements. They will create and update ISO 27001 compliant policies to specifically address the GIMS policy ensuring that all policies, processes, procedures and technical infrastructure remains compliant with MBDA UKs wider ISO 27001 ISMS as well as other certifications as appropriate. The OT Risk Manager will be a critical leader in any new infrastructure projects within MBDA UK and for reducing cyber risk to the business as part of a wider team. The OT Risk Manager will also coordinate all technical security testing within their allocated area of operations, as well as maintaining upward reporting to MBDA UK FM Director, UK Security Director and UK CISO on results and remediation progressions. They will proactively coordinate with the Principle Cyber and Information Security Advisor for all required assurance activity and evidence based reporting. They will work with FM and wider business stakeholders to create a network of Asset Owners and formally document the asset registers for their areas of operation. What we're looking for from you: CISSP, InfoSec/Cyber Degree or equivalent (Essential) Experience or relevant certifications in network security or industrial control system hardening (Essential) Knowledge of security surrounding systems enabling critical services within business (ICS/SCADA/BMS/BEMS) Comfortable with establishing and maintaining relationships with national security authorities, internal stakeholders and industry partners. Expert in security concepts for IT network architectures, applications, cloud services and hardening of operating systems within ICS and SCADA context. Ability to present risk balanced security solutions to complex problems and provide clear advice directly to key stakeholders at all levels Experience of managing and developing inexperienced IT/FM Engineers to maintain security Experience of system accreditation processes and documentation. Experience of security risk management Knowledge of business IT processes and associated approval systems Expert knowledge of modern hacking Tactics, Techniques and Procedures including impacts affecting GIMS/ICS/SCADA. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-ST1

Bolton This is a fantastic opportunity within the Digital Services and Solutions Procurement team to deliver Supplier Relationship Management (SRM) to the Digital Excellence team in the UK. The opportunity is to embed yourself within the Digital Services and Solutions Procurement team, a Domain of c. 30 people across the UK, France and Italy, covering key spend areas such as software (SaaS, Engineering & Manufacturing, Enterprise), Hardware, Services, Networks and Cyber. Salary: Circa £55,000 - £65,000 depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: This team forms part of a wider international Indirect Procurement team of c. 80 people. The UK Supplier n Relationship Manager in Digital Services and Solutions Procurement will be a trusted member of the management team and will be entrusted to focus on SRM delivery across this critical Domain, enabling and developing key supplier/stakeholder relationships and contracts. Our supply partners range from critical locally based service providers to international European or US software providers. The UK Supplier Relationship Manager will work closely with the Group Supplier Relationship Manager and manage the over-arching strategy for SRM with key target vendor and contract relationships, setting ownership, and developing key relationships in the UK. The successful candidate will communicate across wider Indirect Procurement to co-operate internationally, and help up-skill and empower our teams. What we're looking for from you: Senior procurement experience / SRM professional, MCIPS qualified or studying for MCIPS, with extensive experience of dealing with senior internal and external collaborators to board level. Able to lead and influence SRM strategies in differing contexts and services, preferably IT. Knowledge required of contracts and contract law, able to develop and draft SRM schedules, SLAs and critical metrics or performance schedules. Able to apply and carry out contract terms. Able to handle and develop contracts over the contract lifecycle ready for renewal or competition. Excellent written and communicating skills - able to lead independently and make recommendations on strategy. Excellent soft skills and emotional intelligence. A great teammate - ready to champion and mentor our teams, ensuring suppliers and stakeholders are positively engaged, seeking positive outcomes. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-LA1

Bolton This is a unique opportunity for an experienced Electrical Architect to join the MBDA Weapon System Equipment team and work to support the delivery of a range of product capabilities for the needs of domestic and emerging export customers. You'll be working as part of a world-class design team to sustain and develop our products, both in-service and development: incorporating new ideas, functionality and technology to deliver to our customers. Salary: Up to £65k dependent on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Your role will be to develop and define the electrical architecture and requirements of the equipment for all areas of the Weapon System solution, supporting analysis and decomposition to the lower-level sub-system elements and managing all technical elements of the Electrical Power and Control Equipment. Customer requirements in the Land and Maritime Domains will be challenging you to deliver within the constraints of limited physical space and harsh operating environments. Through your regular interaction with stakeholders and customers, using your communication, influencing and leadership skills you will be developing the product development demands with the delivery team, whilst focusing on the overall product picture to enable the 'On Time, On Cost, On Quality' of the technical solution. Maintaining an adaptable outlook in an ever-changing, competitive and challenging working environment will be an advantage. What we're looking for from you: The successful candidate will hold a qualification equivalent to or greater than a City & Guilds Level 3 award covering the requirements for Electrical Installations. Educated to HND Level 4 (or an equivalent qualification) will be advantageous and with appropriate experience, in electrical engineering, having obtained practical application knowledge in the following areas: Electrical Installation Design (in areas other than Building Regulations Part P), covering Extra Low and Low Voltages, and grounding/earthing, screening, and bonding schemes; Certification of installations in accordance with wiring regulations (BS 7671 or equivalent) - specifically for mobile or transportable systems; Design of electro-mechanical machinery and handling equipment in safety critical and complex electromagnetic environments; Platform and Vehicle based power supply, distribution, and management (civil or military); Design and implementation of "Uninterruptable" power systems (desirable); Hands on experience with electrical installations, machinery, testing of electrical installations, testing of equipment(s), trials work.An Electrical Architect within the Weapon System Equipment Capability team will be responsible for: Designing the initial electrical architecture for emergent and early lifecycle projects; Maintaining the electrical definition and requirements at later stages of the lifecycle, including production Delivering the technical and certification documentation, including safety related certification and UKCA/CE declaration; Supporting the functional integration of the hardware within the wider sub system definition; Promoting the wider capability definition of electrical architects within MBDA. Providing certification and sign off expertise for electrical architecture in projects delivered internally and to external customers at all project lifecycle phases;Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Bolton Are you prepared to join an outstanding team that is at the forefront of advanced technology? If you are a driven and experienced engineer looking for a chance to contribute to top-tier Laser Directed Energy Weapon (LDEW) systems, then we have the ideal position for you! Salary: Up to £57,000 depending on experience Dynamic (hybrid) working: 2- 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity: The role of the verification and validation lead for the physical domain is to co-ordinate the overall physical functionality, performance and constraints of the DragonFire system with the weapons system team in order to ensure the consistency of the weapon system product with system requirements and project commitments. This includes understanding, communicating and certifying all aspects of the DragonFire Physical Design for all system components, including: Environmental & EMC performance Power utilisation Storage & TransportabilityThe V & V lead will need to co-ordinate the work packages for both internal and external suppliers to develop certification strategies for the physical domain. Working with RMO's and DAs to ensure that DVP's have appropriate coverage. This role will be focused on the physical certification aspects of the systems. Although an understanding of how these sub-systems work will also be required to support product delivery. As an V and V lead, your main responsibilities will be: Provide physical design compliance statements and CM for review at system level Design change impact assessment Log and track defects found during V&V activities, and collaborate with development teams to resolve them. Manage Design Verification Plan and requirements in Application Lifestyle Management Lead the technical progress meetings and milestone reviews with the supplier Understand sub-contractor management both internal and external Understand and contribute to the key activities in the engineering development lifecycle such as design reviews (PDR/DDR/CDR) Manage schedule, cost, quality and performance metrics for assigned work packages Work within a multi-discipline engineering team (e.g. Systems, mechanical, electrical, software etc...) Limit technical risks through application of mitigation strategies Design reconciliation activities associated with design change, including generation of verification and validation strategies Uplift of other regulatory documentation such as CE marking Support uplift of key documentation, such as technical publications Responding to Customer queries with regard to product usage, interpretation of compliance, certification, etc.What we're looking for from you: Knowledge of systems engineering principles, processes and practices Appreciation of requirements engineering at System, Subsystem or Component level Knowledge associated with the design and build of hardware Awareness of test procedures required to verify products and the gathering of evidence to enable certification. Confidence in presenting technical engineering information and promoting decision making Experience of technical report writing and use of configuration management toolsOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Are you interested in the industrialisation of a Manufacturing Architecture, inspection and test plan, if so this role may be suitable for you. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 3 or 4days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The Principal Manufacturing Engineer - Industrialisation is responsible for developing a manufacturing system and process, alongside the creation of manufacturing and test instructions, FMEA's and Phase Gate reviews, with various technical aspects of Manufacturing. This will involve leading continuous improvement activities, preparation for IVM & VMS certification, risk aversion strategies and efficient non-conformance management methodologies to align with team priorities. The opportunity will also allow you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future principles are some of the work packages that provide stretched objectives for such growth. Develop manufacturing systems and processes in response to the defined Manufacturing Architecture and the Manufacturing, Inspection and Test Plan. Creation and approval of manufacturing and test instruction documentation. Process FMEA and process capability proving. Lead Industrialisation aspects of Product Gate Reviews Oversee obsolescence from a manufacturing Business unit perspective Lead Spiral Development activities for Business unit / Project Lead and support Continuous Improvement initiatives to ensure the area of responsibility is continually developing to improve efficiency. Lead business unit Rate increases requirements. Support the Manufacturing Engineering Manager during the preparation and proving of the Production System for IVM & VMS certification Risk identification and aversion strategies associated with technical definition and manufacturing methodologies. Development, maintain and control technical interfaces to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues. Effective Non-Conformance management and corrective action. Manufacturing focal point at key meetings to report progress of Engineering actions and align team with programme priorities.What we're looking for from you: Degree/HND level of qualifications or equivalent in a relevant subject Experience of the product development lifecycle in an electronics environment. Sound awareness of PLC2. Good Manufacturing knowledge achieved through experience and understanding of industry best practice. Ability to influence across a team of functional professionals. Budgetary management trained.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

This is a fantastic opportunity for an experienced Test Development Engineer, specialising in circuit card electronic test, to join our Test Development team. It is an exciting time as we begin work on a host of challenging, but rewarding projects, from concept design through to series production and full in-service support! Salary: Circa £ 43,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This is a fantastic opportunity for an experienced Test Development Engineer, specialising in Circuit Card electronic test, to join our Test Development team at our Bolton site. Working in an established team as a Test Development Engineer you'll be creating and maintaining small to medium-sized automated test systems. You'll be responsible for the development and implementation of test strategies and, where appropriate, influencing our product through 'Design for Test'. This involves creating test strategy documents, designing Interchangeable Test Adaptors (including both mechanical and electrical elements) and software development of automated test sequences in accordance with a test specification. You'll also have the opportunity to get involved with continuous improvement activities and the development of new technologies What we're looking for from you: Sound understanding of fundamental analogue and digital circuit design. Experience of creating and using technical documentation and Drawings i.e. Schematics, PCB layouts, Engineering Drawings. Significant experience creating Automated Test Equipment. Experience of using NI LabVIEW and/or TestStand preferable. Experience in Boundary Scan / XJTAG preferable. Strong problem solving skills with an exceptional eye for detail. Strong analytical skills and passion for driving continuous improvement, with six sigma experience desirable.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Development & Production Test Engineer Electronics (Defence) Location: Bolton Guidant Global is proud to partner with a prestigious UK Ministry of Defence organisation. We are seeking an experienced Development & Production Test Engineer with a strong Electronic/Electrical engineering background to support missile sub-systems during the production phase. This role focuses on testing, diagnostics, and manufacturing test support, ensuring programme targets for time, cost, and quality are met. Key Responsibilities Provide technical support for manufacturing tests and diagnostics at system and sub-system level Deliver test engineering support from concept through to production readiness Configure and introduce test facilities, including specifications and operator instructions Test and fault-find electronic systems down to circuit card and component level Implement corrective actions to maintain production schedules Represent Test Engineering at Defect Review Boards Skills & Experience Essential Minimum HNC in Engineering or equivalent experience Strong understanding of digital and analogue electronics, measurement, and fault diagnosis Experience supporting electronic sub-systems and production testing Ability to produce test specifications, instructions, and technical reports Good planning, organisation, and communication skills Desirable RF or Microwave sub-system knowledge Experience with manual and automated test equipment Knowledge of CADMID lifecycle, environmental testing, or high-voltage awareness SAP and MS Office experience Test Equipment Experience Digital multimeters, oscilloscopes, power supplies Signal/function generators, counter timers, current clamps Desirable: VNAs, spectrum analysers, RF power sensors, waveguides What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. Salary:Up to £57,000 dependent on experience + bonus + benefits What we can offer you: Company bonus of up to £2,500 (based on company performance and will vary year to year) Pension of maximum total (employer and employee) contribution of up to 14% Paid overtime Up to 15 days flexi leave 25 days annual leave (plus holiday purchase) Possible relocation available Fantastic site facilities, including subsidised meals, free car parking and more Excellent career progression and development opportunitiesHybrid working pattern: Primarily office based (Bolton) with some opportunity for homeworking Want to be part of a successful team working to develop new and innovative seeker solutions to address complex customer requirements? Then keep reading .... The opportunity: An opportunity exists for a Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support of seeker products being produced in our manufacturing facility based at Bolton. The Seeker Division designs and develops state of the art RF and Dual Mode (RF and IR) seekers for use in guided missile programmes. The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. The role: Acting as a design team representative to interface with the design and manufacturing teams to transition a seeker from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aide the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team.What we're looking for from you: We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. The team: The factory based Design Support Team assists with a variety of different seeker projects - no two working days will be the same! The Design Support Team interfaces with both the Stevenage design team & Bolton manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies into the seeker build.Our Business: We respect new perspectives and experiences, and we value our collaborative ways of working. We are committed to growing and supporting diversity in our workforce and ensuring everyone has an equal opportunity to reach their potential. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. We also welcome applicants who are looking for flexible working arrangements. Follow us on LinkedIn (MBDA), Twitter (@MBDAcareers), Instagram (lifeatMBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note: MBDA UK Limited requires all employees to achieve the required medical and national security clearance for their role. Further restrictions and/or limitations relating to nationality and/or rights to work may also apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. Due to the nature of our business, this particular vacancy requires the applicant as a minimum to be a British Citizen or a Dual UK national with British citizenship and capable of achieving the clearance levels mentioned above. #LI-SF1

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a leading role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Job Title: Test Equipment Design Engineer, Production Design Support Salary: Circa £48,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a leading role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Experienced engineer who will be prepared to work autonomously if needed, leading the delivery of your work assignments and actively engaging with stakeholders to ensure successful delivery of your outputs. Solid experience of managing discreet work packages preparing bids, controlling costs and delivering solutions. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. Full Product Lifecycle knowledge or experience Willingness to provide support to and mentor other Engineers and Engineering Technicians.Proven experience in the design of one or more of the following disciplines:- RF and Antenna Design Electrical Architecture Design for Safety and Integrity RF Test and measurement principle knowledgeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Important: All applicants must be able to obtain Security Clearance and must hold British Nationality as their sole nationality. Working: The role offers flexible & hybrid working. It would be beneficial to be on-site 2-3 days a week, depending on the project needs and working remotely other days. • An opportunity exists for an Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support team in the manufacturing facility. - The Design Support Engineer designs and develops state of the art RF and Dual Mode (RF and IR). The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. - The Design Support Engineer is factory based and will assists with a variety of different projects. The Design Support Team interfaces with both the design team & manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies. - Role Requirements; Acting as a design team representative to interface with the design and manufacturing teams to transition from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aid the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team. - Skill and Experience; We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role, and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. - Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Benefits; Bonus: Up to £2,500 (based on performance). Pension: Up to 14% total contribution. Parental Leave: Enhanced parental, maternity, and shared parental leave. Flexi Leave: Up to 15 additional days. Facilities: On-site perks like subsidised meals and free parking. Training and Development: Excellent opportunities for career progression and skill development • Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. *Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. *Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. - For full information, please get in touch

Bolton We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: · Company bonus: Up to £2,500 (based on company performance and will vary year to year) · Pension: maximum total (employer and employee) contribution of up to 14% · Overtime: opportunity for paid overtime · Flexi Leave: Up to 15 additional days · Flexible working: We welcome applicants who are looking for flexible working arrangements · Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments · Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... . Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: • We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products., • Your role as an Electronics Engineer is to develop electronic solutions for cutting-edge systems. This will mainly include; Design, qualification and certification activities across the whole product lifecycle for Land, Sea, and Air platforms, • This role offers various types work, challenges, and a multitude of applications; typically this includes: reviewing requirements; generating a concept solution, schematics, and manufacturing data packs; involvement in component & COTS (commercial off-the-shelf product) selection; design, test, qualify to meet high-reliability & harsh environments; technical report writing; involvement supporting investigations and our colleagues in manufacturing. You can work in our labs and get hands-on working on bread-board demonstrators through to flight standard hardware., • This is a fantastic opportunity to shadow our more experienced Electronics Engineers & Technical Leads, learn from them and the teams around you before leading your own projects and developing to a Senior Electronics Engineer or Tech Lead., • We respect new perspectives and experiences, and we value our collaborative ways of working.We are committed to growing and supporting diversity in our workforce and ensuring everyone has equal opportunity to reach their potential. We believe that any individual with a learning mindset and belief in what we docan make a difference here. What we're looking for from you: • We are looking for proactive individuals who are motivated to develop within their Senior Electronics Engineer role;, • Candidates would be ideally degree qualified (electronics engineering, science, physics) or HND equivalent experience, have been involved in development of electronics products, and ideally, have a background in complex electronics and working in a multi-functional team (e.g. with mechanical, firmware, and software)., • You will have a sound track record in electronic design capability throughout the product life cycle, i.e. early concept through to production; be organised with an eye for detail and a sense of pride in what you deliver., • Most important for us is that you have the right attitude and a passion to develop - we can offer the training and support you need to enable you to broaden your skills and experience and take steps towards senior roles and onwards. We offer a clear progression path and will give you support for career growth and development. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1