Trabajos national security en Bolton - Page 2Crear alertas

Are you interested in the industrialisation of a Manufacturing Architecture, inspection and test plan, if so this role may be suitable for you. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 3 or 4days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The Principal Manufacturing Engineer - Industrialisation is responsible for developing a manufacturing system and process, alongside the creation of manufacturing and test instructions, FMEA's and Phase Gate reviews, with various technical aspects of Manufacturing. This will involve leading continuous improvement activities, preparation for IVM & VMS certification, risk aversion strategies and efficient non-conformance management methodologies to align with team priorities. The opportunity will also allow you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future principles are some of the work packages that provide stretched objectives for such growth. Develop manufacturing systems and processes in response to the defined Manufacturing Architecture and the Manufacturing, Inspection and Test Plan. Creation and approval of manufacturing and test instruction documentation. Process FMEA and process capability proving. Lead Industrialisation aspects of Product Gate Reviews Oversee obsolescence from a manufacturing Business unit perspective Lead Spiral Development activities for Business unit / Project Lead and support Continuous Improvement initiatives to ensure the area of responsibility is continually developing to improve efficiency. Lead business unit Rate increases requirements. Support the Manufacturing Engineering Manager during the preparation and proving of the Production System for IVM & VMS certification Risk identification and aversion strategies associated with technical definition and manufacturing methodologies. Development, maintain and control technical interfaces to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues. Effective Non-Conformance management and corrective action. Manufacturing focal point at key meetings to report progress of Engineering actions and align team with programme priorities.What we're looking for from you: Degree/HND level of qualifications or equivalent in a relevant subject Experience of the product development lifecycle in an electronics environment. Sound awareness of PLC2. Good Manufacturing knowledge achieved through experience and understanding of industry best practice. Ability to influence across a team of functional professionals. Budgetary management trained.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton An opportunity has arisen within our Customer Support business area for a number of Integrated Logistic Support Managers to ensure our ability to support our next generation Missile systems to our worldwide customer base. These opportunities will give you considerable scope to improve programme management skills, develop Customer facing skills and promote your profile internationally within MBDA. Salary: Circa £65,000 depending on experience Location: Stevenage, Bristol or Bolton Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunities Possible Relocation AvailableThe opportunity: An opportunity has arisen within our Customer Support business area for a number of Integrated Logistic Support Managers to ensure our ability to support our next generation Missile systems to our worldwide customer base. These opportunities will give you considerable scope to improve programme management skills, develop Customer facing skills and promote your profile internationally within MBDA. What we're looking for from you: ILS Experience essential A broad based engineering background, a degree level qualification in a numerate / technical discipline would be beneficial, with knowledge and experience of Weapon Systems support models Understanding of predictive logistics models Prioritisation and ability to deal with multiple issues on a regular basis Strategic planning of support work, from supply chain through to customer deliveryOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

We are seeking an experienced and highly motivated individual to join the Quality Assurance team in Bolton, providing support to both the Manufacturing and Supply Chain teams. Salary: Circa £60,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity? Are you a Quality professional with a passion for problem solving? Working with our Manufacturing & Supply Chain teams you will lead the Quality Assurance activities on one of our complex Weapon System production lines, thereby supporting delivery of UK strategic defence needs. Co-ordinate delivery of the Quality Assurance activities across the Manufacturing Business Units to reduce production programme quality risks. Timely resolution of production line issues, by leading multi-functional teams through application of industry standard problem solving tools and techniques. Lead delivery of assurance activities associated with industrialisation of our production lines. Identify and mitigate production risks through implementation of PFMEA's, Control Plans, Special Process validation, etc. Lead Project Manufacturing Non-Conformance Panels, escalating critical issues to senior management. Ensure implementation of any Project specific non-conformance processes within manufacturing. Conduct non-conformance data analysis to identify trends, root causes and opportunities for improvement. Primary interface to Customer for project contractual deliverables out of our Bolton production facility. Additional role responsibilities: Support the Project team in developing cost effective project planning to assist in on time delivery of all contractual deliverables, whilst meeting MBDA policy and process. Collaborate with the engineering and manufacturing teams to optimise the manufacturing processes. Support the delivery of Product Life Cycle Gate reviews, providing assurance of deliverables and ensuring timely closure of actions. Provide Quality reporting into Project, Manufacturing and Functional Programme Reviews. Drive the Quality culture within the Manufacturing domain to ensure continuous improvement and delivery of the quality strategy and risk assessments. Certify and release product to our customer in accordance with the contractual requirements. What we're looking for from you: Preferably degree educated, or substantial experience in Quality Management Practitioner of current QA problem solving methods (8D, Six Sigma, DMAIC, etc.) Good working knowledge of Microsoft Office packages (PowerPoint, Word and Excel) Excellent interpersonal skills are essential and able to influence others in a collaborative way. Highly self-motivated, and demonstrate a determination and persistence to deliver results despite obstacles and setbacks. Position is based at our Bolton site, but will require provision of support at our other MBDA sites. Some travel (both UK and international) maybe required. What's in it for you? The role provides an exciting opportunity to work in a high technology environment ranging from the manufacture of CCA assemblies through to live build of Weapon Systems. What's great about the team? Join a collaborative and supportive team who work together to contribute to a shared ambition to deliver for our Armed Forces and preserve the company's reputation as the leading provider of Missile and Weapon Systems. Achieve all this while maintaining your work/life balance!! Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

Our client, a trusted partner of the UK Ministry of Defence, is looking for a detail-focused General Operator to join their cutting-edge manufacturing team. This role is ideal for candidates with experience in microelectronics assembly, particularly those confident working under a microscope with extremely small components. You'll be part of a high-performing team supporting the production of advanced missile systems, with a focus on precision soldering and assembly of circuit card components. If you have a steady hand, a sharp eye, and thrive in a cleanroom-style environment-this is for you. Key Responsibilities: Assembling and soldering microelectronic components under a microscope Following detailed manufacturing instructions and quality standards Supporting sub-assembly and certification processes Working across departments including PEC/CCA, looming, plastics, and stores Ensuring compliance with health & safety and ESD protocols Tentatively work across several departments, these might include: Looming: binding wire looming is a cable assembly that efficiently distributes electrical signals by linking cables together using a crimping tool. (Ex; wiring, root wiring, soldering and fibre optics cabling), PEC and CCA Assembly Microelectronics Plastics Department (Ex; applying glues, cutting out intricate patterns, and moulding). Manufacturing Controller/Stores What do you need?: Proven experience in microelectronics or fine-pitch soldering Comfortable working under a microscope for extended periods Strong manual dexterity and attention to detail Ability to read and follow technical layouts and instructions IPC 610 certification (preferred) ESD training (essential) Basic PC and Microsoft Office skills Experience with crimping tools and small-scale assembly Additional skills: Experience utilising a soldering iron and working with manufacturing micro-components Experience using a microscope/magnifying glass What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

We have an exciting opportunity for an experienced Electronic Design Engineer to join our team and play a leading role in the support of production activities at our state of the art manufacturing facilities. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: You will act as part of the design team as one of the main interfaces to our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Working within design support is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of these products to deliver support to our customers. What we're looking for from you: You'll need to demonstrate a number of the following attributes: · Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. · Proven experience in the design of the following disciplines:- · Analogue and Digital Electronics · Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. · Someone who will be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. · Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. · Experience in a manufacturing environment and supporting and resolving manufacturing issues and a view to implement Design for Manufacture improvements into the design. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

An opportunity has arisen for a dynamic and self-driven Safety, Health & Environmental Advisor to join the MBDA team at our Bolton site. If you are passionate about safety, health and reducing our impact on the environment, this challenging but rewarding position may be for you. Salary: Circa £37,000 depending on experience Dynamic (hybrid) working: A minimum of 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: As a Safety, Health & Environmental (SHE) Advisor, you will combine strong administrative governance and management system control with a visible, "boots on the ground" operational presence across all functions, including logistics, production cells, and test facilities. You'll provide proactive, site-based Safety, Health and Environmental support within a manufacturing environment. The role will ensure compliance with UK legislation, stakeholder requirements, and internal management systems while actively influencing safe behaviours in an operational environment. Operational ("Boots on the Ground") Safety Support Maintain a visible presence across logistics, manufacturing areas, test facilities, laboratories and engineering. Support routine SHE inspections. Support Team Leaders in developing and reviewing task-based risk assessments and safe systems of work. Provide real-time advice during non-routine tasks, breakdowns, maintenance activities, and contractor works. Challenge unsafe behaviours in a constructive and professional manner. Support emergency exercises and drills. Monitor high-risk activities such as: Lifting operations (LOLER) Hazardous substances (COSHH/DSEAR) Confined spaces Hot works Explosive or energetics-related activities (where applicable) SHE Administration & Governance Maintain SHE documentation in line with ISO 45001 and ISO 14001 management systems. Administer incident reporting systems and ensure accurate record keeping. Track and monitor corrective and preventive actions to closure. Support preparation of monthly SHE reports and KPI dashboards. Manage document control for risk assessments, procedures, and policies. Coordinate audit schedules and maintain audit records. Support internal and external audit preparation, including evidence collation. Maintain statutory inspection records (e.g. lifting equipment registers, LEV Thorough Examination and Test records etc.) Incident Investigation & Reporting Lead or support investigations into accidents, near misses, and environmental incidents. Apply structured root cause analysis methodologies (e.g., 5 Whys). Produce clear, factual investigation reports for internal governance and external stakeholders. Support RIDDOR reporting submissions. Analyse incident trends and recommend preventative measures. Regulatory & Defence Compliance Ensure compliance with UK legislation including: • Health and Safety at Work etc. Act, • COSHH, • PUWER, • LOLER, • CDM, • Environmental Protection Act Assist with security-controlled document handling where required. Liaise with enforcing authorities (HSE, Environment Agency) when necessary. Environmental & Sustainability Support Monitor waste streams, hazardous waste controls, and spill prevention measures. Support environmental inspections and permit compliance. Maintain environmental registers and aspects/impacts documentation. Assist with sustainability reporting and improvement initiatives. Culture & Engagement Deliver toolbox talks, safety alerts, and briefings. Support induction training for new starters and contractors. Act as a point of contact for employee safety concerns. Promote near-miss reporting and positive intervention culture. Support behavioural safety initiatives and human factors integration What we're looking for from you: • NEBOSH General Certificate as a minimum (Ideally working towards or willing to work towards Level 6 Diploma in Occupational Health and Safety Practice) Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-ST1

Bolton An exciting role has become available in our Test Architect team as a Technical expert involved in all aspects of the Missile Test process. If you have experience Electronic circuit design, testing and failure analysis techniques along with Test equipment design then this could be just the role for you! Salary: Circa £72 ,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car allowance: £300 per month Pension: maximum total (employer and employee) contribution of up to 14% Private Medical Insurance Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As the Missile Test and Testability Expert you will be reporting in to the Test and Testability Department Head and, from a Project perspective, into the Project Chief Design Engineer. As Test and Testability Architects (TTA), we are involved in all aspects of the Missile Test process - from the early feasibility studies to series production and in-service support. As a Subject Matter Expert for Missile Test and Testability Architecture you will participate in range of missile programmes using your experience and expertise to improve the definition of test equipment technical requirements by focussing on key areas and removing waste. You'll be managing definition of the project test strategy, Definition of Project BIT architecture including coverage requirements and improving the way we write our specifications across all projects. As a key member on the team you'll be assessing and recommending improvements to our ways of working across TTA and lead the analysis of production test data to spot trends and diagnose failures. There will also be a need for you to lead the analysis and modelling our system to understand the test coverage and generate diagnostic instructions. Day to day you could also be involved in - Participating and supporting Red-Team reviews and activities into critical issues during development and manufacture. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Mentor and actively support members of the Test & Testability department. Lead / participate in roadmap development activities.What we're looking for from you: Educated to degree level (or equivalent) with significant experience of electronic test at all stages of project lifecycle, including: Electronic circuit design, testing and failure analysis techniques. Test equipment design. Experience in requirements capture. Project management and planning. Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Experience in DfT and testability Proven ability to influence senior stakeholders within the business relating to technical direction Support departmental strategy and support the department head with recruitment of the right people into the team. Strong interpersonal and well developed communication skills (written & verbal).Willingness to travel when required (UK and EU). Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

Company Description Assystem is an international company with one mission: accelerate the energy transition around the world. Every day, our 6,500 switchers located in 12 countries (Europe, Middle East, Pacific Asia & Africa) connect their six thousand billion neurons to tackle the task of the century: switching to low-carbon energy. We are a collective committed to the actors who are making the energy switch. Sharing our knowledge, expertise and values allows us to innovate and think differently about the energy transition. To ensure a viable, efficient, and reliable energy future for all. Assystem is a leading Global Engineering Consultancy tasked with shaping the future of the energy landscape and helping to deliver net-zero solutions. Whether through our New Build, Decommissioning, Defence or Infrastructure business areas and partnerships, we need your talent to meet our demanding growth plans in the UK. Join us and develop your career in a world class, inspiring & supportive environment. Job Description Bid Manager - Blackburn Are you a strategic thinker with a talent for managing bids from start to finish? Do you thrive in a fast-paced, deadline-driven environment? If so, we have an exciting opportunity for you! As a Bid Manager, you’ll lead the end-to-end bid process, assembling high-performing teams and crafting winning strategies. You’ll play a pivotal role before the bid even begins, ensuring our approach aligns perfectly with client needs. Your expertise will continue post-submission, guiding presentations and negotiations while implementing valuable lessons for future success. Your Missions: ️ Own the bid process from RFIs, RFPs, PQQs, ITTs, and ITNs to client presentations. Develop winning strategies. Work closely with Key Account Managers to define compelling win themes. ‍ Manage virtual bid teams – Engage with sales, marketing, finance, legal, and project management. Influence stakeholders . Drive decisions that align with business goals and bid success. Ensure commercial viability. Prepare pricing models, manage risk, and deliver compliant bids. Deliver high-impact proposals. Shape content and presentation for maximum engagement. ⏳ Meet deadlines with confidence . Set realistic timelines and coordinate seamless submissions. Support continuous improvement. Conduct post-bid reviews and enhance future strategies. Why join the community of Switchers?: Work-Life Balance: Enjoy 2 to 3 days of remote work per week. Career Growth: Benefit from ongoing training and numerous career opportunities; 70% of our managers are promoted internally! The Group is currently ranked Third in the world for nuclear engineering. Access to an employee assistance programme with free mindfulness, health, wellbeing resources and a confidential support line available 24/7 via phone or text At Assystem, we celebrate diversity and creativity. We believe in harnessing unique perspectives to shape innovative solutions. Your skills and daring spirit are what truly matter. Join us and help shape the future! Qualifications Candidate Profile (Skills, Experience & Qualifications): Experience & Expertise Proven experience of bid management experience (B2B, professional, or engineering services) ideally within a professional services environment. Strong strategic commercial awareness (ideally with NEC 3/4 contracts). Proven success in developing and leading winning bids Excellent project management techniques with the determination and drive to make things happen Outstanding writing, proofreading, and editing skills with the ability to adapt style to different audiences and channels. ⏳A natural multi-tasker with ability to track and manage multiple projects and perform under pressure to meet tight deadlines Qualifications & Tools Graduate degree (or equivalent experience). APMP Foundation (Practitioner or Professional level desirable). Advanced MS Office skills. Additional Information Security clearance: Please be aware that many roles at Assystem are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Bolton Are you prepared to join an outstanding team that is at the forefront of advanced technology? If you are a driven and experienced engineer looking for a chance to contribute to top-tier Laser Directed Energy Weapon (LDEW) systems, then we have the ideal position for you! DragonFire has been and continues to be a boundary pushing weapon system development programme that has significant industry and customer engagement. Thus far the programme has been aimed at developing the UK's first Laser Directed Energy Weapon (LDEW) concept demonstrator, achieving significant success recently with several highly publicised trials activities. Following on from these successes MBDA is looking for flexible and motivated candidates to continue to develop DragonFire into a world class, deployable, LDEW air defence system. Our ambitious plans involve parallel and interleaved streams of pioneering technology experimentation and rapid weapon system development, providing opportunities across the key weapon system domains of Systems Engineering: requirements, design, performance analysis and certification. Salary: Circa £55,000 - £65,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary, depending on grade. Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The Opportunity The Laser Source Project Engineer (RMO) will work with an external partner to deliver the Laser Source Sub-System for DragonFire. The Laser Source is a high power electro-optical assembly mounted in a mechanical assembly. The Laser Source generates the high energy laser beam. This is integrated to the Beam Director and integrated into a transportable container assembly (both developed by other partner companies). Reporting to the project sub-system lead; this role will be focused on the acceptance and delivery of the Laser Source sub-system, its final assembly, integration, and test. A proven record of complex sub-system delivery and integration is desirable, as is a working knowledge of high energy lasers. The Laser Source RMO will be responsible for: interface management with the external partner, both programmatically and technically; acceptance of and delivery of the Laser Source to final assembly, integration, and test; supporting the functional integration of the Laser Source within the wider sub-system definition; project development in order to continue the evolution of DragonFire.What we're looking for from you: Individuals who have experience in or can demonstrate their ability to: Operate in the early lifecycle of a project, to drive technical direction for the equipment under development and clarify stakeholder needs Worked with third party suppliers and developed technical statements of work and deliverables Develop complex electrical equipment or subsystems and ensure the emergent design is compliant to the project requirements Proactively engages stakeholders and builds relationships that will further the project Lead technical work packages alongside experienced project managers, to demonstrate progress and balance technical risks.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

MBDA is looking for a number of Software Engineers at varying levels to work in the Software Resource and Capability Team on Test Software. Salary:£40,000 - £75000 depending on experience Dynamic (hybrid) working:3 to 4 Days a week in the office Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity Test Equipment Software UK work to deliver the MBDA UK test capability in partnership with colleagues in Electronic Design, the Test Centre of Excellence and other areas of Software Engineering. Our mission as a function is to facilitate robust and timely test of missile systems and ensure MBDA continues to provide a decisive military capability for our home nations and their allies. Spanning a diverse portfolio of work packages, Test Software UK directly influences the company's product certification, manufacturing output and support activities. Specifically, Test Software UK are responsible for developing and supporting software packages that utilise Test Equipment hardware to configure, verify and validate the conformance and quality of our MBDA UK product range from development, through production and into field test scenarios. It is a multi-disciplined, dynamic, focused and agile team specialising in all aspects of test solution design, including software, hardware, simulation and real-time systems. It is great a place to learn about the company's entire product portfolio, whilst embracing the change to DevOps and other innovative technologies! What we're looking for from you: A software or electronics engineer with transferable talent into software development for test solutions: Strong ability to write software in languages such as C, C++ and C# (Some Python experience would be useful but not essential) motivated to develop and support reliable, high performance, standardised, and documented software. Excellent analytical and design ability, including review and critical analysis 'Can do' and flexible approach - you'll enjoy solving technical problems that sometimes extend beyond the bounds of "software" Keen to work on novel products where the software you produce is time and mission critical Able to communicate effectively with multiple stakeholders, including Systems Engineering, Electronics and Electrical, and Test and ValidationOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Our client, a trusted partner of the UK's Ministry of Defence, is seeking a Mechanical Inspector to join the certification team. The role involves authorising products in accordance with the product certification procedure at the Bolton site. Key Responsibilities: Certify the product by the product certification procedure and monitor the operators responsible for product certification. Upon inspection, check for proper assembly and inspect all parts for defects in finishing painting or surface deterioration. Conduct a thorough inspection for any physical damages and perform intermediate inspection checks unrelated to product certification. Complete manufacturing data pack paperwork and maintain data records/defect reports. Control defect items via segregation from good products and produce relevant inspection/quality control documentation/history sheets and audits. Care for and use specialised inspection tools. Ensure compliance with all applicable manufacturing procedures and meet inspection times. Possess a versatile skill set and apply it to various tasks while maintaining the highest workmanship standards and product quality. Also, keep good housekeeping policies. Willing to contribute to an environment of process improvement. What do you need?: Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard or Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) and Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Not required if a L3 apprenticeship standard has been achieved (These qualifications must meet the standard to be considered for the role). Additional Skills: Must demonstrate a proactive approach to problem-solving and commitment to work as part of a team to deliver the business. It is essential to have experience inspecting the work of others for sign off. Several years of experience as a skilled person. IPC 610 certified / trained preferred What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

Bolton | Up to £57,000 + Bonus + Overtime + Benefits | Hybrid Working Great engineers don’t just design technology. They solve problems that can stop production lines, and this is one of those roles. A global advanced technology organisation is looking for an Electronic Engineer with strong RF knowledge to join a highly capable engineering team supporting the transition of complex electronic systems from development into production. This is hands-on, high-impact engineering. You will work at the critical intersection of design and manufacturing, solving technical challenges, improving production capability and ensuring sophisticated electronic systems are delivered on time and to a very high / safety critical standard. What You will Be Doing • Acting as the engineering interface between design and manufacturing teams, • Supporting the transition of complex electronic products from development into series production, • Solving production and capability challenges to maximise manufacturing yield, • Managing technical queries and supporting non-conformance resolution, • Working closely with internal teams and external suppliers to maintain production continuity, • Supporting component lifecycle and obsolescence management What We’re Looking For • You will be an Electronic Engineer who likes to get stuck in, and will likely bring:, • A broad electronic engineering background, • Strong knowledge of RF engineering, • Experience with electronic assembly and test environments, • The initiative to investigate issues and drive solutions, • Confidence working with both engineering and production teams If you enjoy solving technical problems and keeping complex engineering programmes moving forward, then you will fit right in. What’s On Offer • Salary up to £57,000 depending on experience, • Company bonus up to £2,500, • Pension contributions up to 14%, • Paid overtime, • Up to 15 days flexi leave, • 25 days holiday plus the option to buy more, • Excellent career progression opportunities, • Subsidised meals, free parking and great on-site facilities If you’re an engineer who enjoys fixing real problems and keeping advanced technology moving, this is worth a conversation. You will need to be a British citizen, or dual national with British Citizenship, and eligible for UK security clearance. Cirrus Selection — specialist recruiters to the engineering and technology sectors, offers the services of an Employment Agency for permanent recruitment and the services of an Employment Business for contract recruitment