Trabajos power plant en HayesCrear alertas

Electrician - Hayes area Upto£50,000earnings, plus Company Vehicle, Fuel Card, Power Tools, Plant & IT Equipment We are expanding our work force and looking for experienced electricianswith the ability to carry out all the customers compliance requirements within commercial properties, these can range from retail and hospitality to sports stadiums, Hospitals, SPS Prisons, Educational facilities, and... ZIPC1_UKTJ

Multi-Skilled Maintenance Engineer Location: Hillingdon Job Type: Temporary Duration of booking: Expected to last 6 months with possible extension Proposed start date: ASAP Pay Rates: Up to £23 per hour Umbrella or £20 per hour PAYE inclusive of holiday pay Hours / Working Days: 37.5 hours per week / Monday to Thursday, 8am – 4.30pm Friday’s 8am – 4.00pm Sector: Healthcare Based: Office / Hospital Job Summary The Estates Maintenance Multi-Skilled Technician is a key member of the Estates maintenance Department, providing daytime operational support to ensure continuity of maintenance services. The post holder will undertake a wide range of reactive and planned maintenance tasks across mechanical, electrical, and building-fabric disciplines, ensuring systems remain safe, compliant, and operational. Key Result Areas Reactive Maintenance • Respond to maintenance requests via Helpdesk, • Diagnose and repair mechanical, electrical, and fabric faults, • Ensure all works are completed safely and within SLA timeframes, • Undertake temporary repairs where immediate permanent fix is not possible Mechanical & Plumbing • Maintain heating, hot/cold water systems, pumps, valves, and pipework, • Carry out repairs and system reinstatement, • Assist with plant maintenance including steam boilers and pressurisation systems Electrical • Diagnose and repair faults on lighting, power, and distribution systems, • Replace fittings, switches, and components, • Undertake safe isolations in line with HTM guidance Building Fabric • Carry out general repairs including doors, locks, ceilings, and finishes, • Undertake minor joinery and fabric works Planned Preventative Maintenance (PPM) • Undertake routine PPM and compliance checks, • Record all maintenance activity via CAFM/PDA systems, • Support statutory compliance requirements Building Management Systems (BMS) • Monitor plant performance and alarms, • Assist in maintaining environmental control systems Person Specification Education & Qualifications (Essential) • NVQ Level 3 / City & Guilds in Mechanical, Electrical, or Building Services Engineering, • Completed apprenticeship or equivalent training, • Multi-skilled capability across at least two disciplines Experience (Essential) • Experience in reactive and planned maintenance, • Fault finding across mechanical and/or electrical systems, • Experience working in a multi-disciplinary environment, • Use of CAFM or electronic work-order systems Skills & Knowledge (Essential) • Strong fault-finding and problem-solving ability, • Knowledge of:, • HTMs, • Health & Safety legislation, • Ability to work independently and manage workload, • Good communication and IT skills Desirable • NHS or healthcare environment experience, • Competent Person / AP exposure, • Experience with BMS systems

For over 20 years James Lewis Ltd has provided a wide variety of engineering services to the major Bus & Coach operators and manufacturers throughout the UK.\n\nWe have varied projects with multiple clients throughout the UK and are looking for experienced & flexible engineers who are able to adapt to the diverse nature of our work.\n\nJob Types: Full-time\n\nSalary: £55429 (days)-£59426 (nights) per annum\n\nShift: 4 on 4 off (Apply online only) or on (Apply online only)\n\nBenefits:\n\n Overtime Available\n\n Pension plan\n\n Free bus travel\n\nDuties to include:\n\n Undertaking Vehicle maintenance, servicing and running repairs on a varied fleet (including M.O.T preparation)\n\n Prompt Repair of all defective vehicles to the highest standard\n\n Ensure vehicles are maintained in accordance with the Company Operators Licence guidelines\n\n Ensure all repairs to company vehicles are carried out in a timely manner\n\n Have an ability to work to the highest Health & Safety standards\n\n Prep & Presentation for VOSA tests\n\n Preventative Maintenance\n\n Fault Diagnostics\n\n All associated paperwork, reports and admin\n\nCandidates must have a recognised qualification in PCV or HGV Engineering and ideally have +3 years of post-apprenticeship experience.\n\nYour own set of tools is essential, as is a valid driving licence. A PCV driving licence would be ideal but not essential.\n\nAbout us:\n\nJames Lewis is the market leader in supplying contract and permanent workforce solutions to the Automotive, Transport and Heavy Power industries, we provide both white and blue-collar personnel throughout the UK working with FTSE 100 companies and SME’s. If you feel you have the right skills for the above position or you are a HGV Technician / HGV Engineer / HGV Mechanic / HGV Fitter / PCV Engineer / PSV Mechanic / Plant Engineer / Plant Technician / Plant Fitter / Diesel Technician / Diesel Mechanic / Diesel Fitter looking for a new position then please call

Commercial Electrician | Permanent, PAYE | Shifts (Days & Nights) - Continental Pattern | Critical, Datacentre Environment | £58-£62.5K Base | OTE: £70-75K+\n\nDue to growth of our critical services, infrastructure team within a datacentre environment, based in Hounslow, close to Heathrow Airport, we are currently recruiting for a Commercial Electrician who is seeking to transition into a maintenance based position, carrying out planned maintenance and remedial works to critical mechanical and electrical (M&E) equipment within a critical data centre environment.\n\nAs the Electrician, you must hold previous experience in either installation or maintenance within commercial or critical environments.\n\nEmployment Package:\n\n Role: Commercial Electrician / Electrical Shift Engineer\n\n Status: Permanent, PAYE\n\n Base Salary: £58,000 - £62,500\n\n Expected Earnings: £70,000 - £75,000\n\n Location: Static site - Hounslow, close to Heathrow Airport\n\n Hours: Continental Shift Pattern (days and nights) - 3 Days/3 Nights, 4 OFF, 4 Days, 6 OFF, 4 Nights, 4 OFF.\n\n Works: Planned maintenance and remedial to critical datacentre M&E and plant infrastructure (Electrical, Mechanical, HVAC equipment - electrically biased).\n\n Package: 3-4% annual bonus, £3,000 annual HVAP allowance, company funded training, courses and up-skilling. 25 days paid holiday pro rata to shift pattern, company pension, paid overtime, various internal benefits such as medical/dental care, income protection etc.\n\n Electrical equipment: Lamps, ballasts, emergency lighting, sockets, circuits, cabling, wiring, containment (cable trays, ladders, conduit), transformers, switchgear, distribution boards, MCBs/RCBOs/fuses, busbars, PDUs (power distribution units), RPPs (remote power panels), UPS systems, static bypass switches, batteries (VRLA/lithium), battery monitoring systems, generators (diesel), ATS (automatic transfer switches), STS (static transfer switches), high voltage switching, HV/LV substations, ring main units, temporary power supplies, electrical fault finding equipment (PAT testers, multifunction testers, thermal imaging cameras, power analysers).\n\n Electrical components and first line faults to HVAC / Mechanical / Monitoring systems, such as CRAC units (computer room air conditioning), CRAH units (computer room air handling units), fan coil units, pressurisation units, humidifiers, legionella testing, BMS monitoring (building management systems).\n\nRequirements:\n\n Must be a qualified Electrician, ie: NVQ Level 3, City and Guilds 2330 Level 3, City and Guilds 2360 Part 2 (or equivalent).\n\n Up to date regulations: 18th edition.\n\n Testing certificates would be a bonus but not essential: City and Guilds 2391 or 2394/2395.\n\n Must have experience working within commercial environments / with commercial electrical systems.\n\n Experience with critical infrastructure systems would be highly beneficial but not essential. Such as; Uninterruptible power supplies (UPS), high voltage switching (HV), generator systems with ATS/STS, CRAC units / CRAH units.\n\n Must be able to work the advertised shift patterns including weekends and nights - average of 14 shifts per month.\n\nIf you are a Commercial Electrician and would be interested in this position, then please apply today by submitting a full CV

Our client is one of the worlds leading data centre specialists who maintain data centres in the UK, Europe and World Wide. They now have an opportunity for a Shift Leader to join the team on a permanent basis.\n \n The Responsibilities: \n \n Maintaining and keeping in good repair, the buildings mechanical & electrical systems along with all associated component parts of Data Centres. \n Routine tests, checks and record keeping for all the buildings systems \n HV Switching, writing HV/LV switching schedules \n\n Maintain water systems and all records to the highest standard in accordance with L8 Legislation.\n\n* Undertake daily walk rounds of client areas and plant rooms to note and rectify any defects and to maintain Plant rooms in a clean, tidy and safe condition. \n Liaise and arrange sub contractor support and effectively manage and control all sub-contractors, including cleaning. \n To monitor the buildings environmental temperature, humidity, and space conditions and ensuring that they are maintained in accordance with the business requirement \n To monitor and adjust as deemed necessary, the building management systems (BMS) to control the buildings HVAC to optimal levels of efficiency. \n Provide rapid and effective response to customer and helpdesk calls and defects. \n Provide innovative solutions to improve building, plant and system energy efficiency. \n Manage, rectify and record defects through the Help Desk to ensure all are rectified within SLA timeframes. \n * Keep the Shift Manager and Operations Manager briefed on all issues and progress. \n Raise hazard, incident and flash reports \n Use the Log Book System to store all records and certification for the site. \n * Manage defects to completion; including full investigation, sourcing materials, provision of quotes, raising of Purchase Orders and arrangement of rectification. \n\nThey are looking for a Shift Leader\n\nSalary including shift allowance £69,000 to £70,000 + Bonus + Annual Salary increases\n4on, 4off, 4on, 6off, 6on, 4off\nOvertime Available at 1.5x hourly rate\nPension\n20 Shift Days Holiday\nCycle to work Scheme\nLife Assurance\nRetail Discounts There will also be a great opportunity to progress within supervisory and management positions etc. \n \n To be considered for the post you will need to have relevant electrical qualifications and experience in a similar role carrying out building services maintenance in a critical environment. \n \n City and Guilds, NVQ or equivalent is essential\n\nPrevious experience with HV in a Data Centre\n\nThis job involves the maintenance and upkeep of the building systems, AHUs/Lighting/Power/UPS/HV/Generators/Cooling systems/BMS/Faultfinding etc.\n\nThe HV ticket doesn't necessarily need to be in date. \n \n If you would like to be considered for this incredible job opportunity, apply now online or contact Tarik Bell-Ross on (phone number removed) / (url removed)\n\nRG Setsquare is acting as an Employment Agency in relation to this vacancy

Electrician - Hayes areaUp to £50,000 earnings, plus Company Vehicle, Fuel Card, Power Tools, Plant & IT EquipmentWe are expanding our work force and looking for experienced electricians with the ability to carry out all the customers compliance requirements within commercial properties, these can range from retail and hospitality to sports stadiums, Hospitals, SPS Prisons, Educational facilities, and government institutions and LED Lighting project work.In return for your commitment and expertise, you will get: • A base salary of £38,500- £40,560 with average earnings of circa £58,000 (base salary, on call, overtime/weekends, and paid travel time), • 40 hours per week (8am to 4pm) and OOH work when required., • 31 days holiday allowance (including statutory bank holidays), • Pension, • Access to Virtual GP for you and your family, • A fully maintained new company Van (available for private use as well), • We cover all parking fees and work-related expenses., • Fuel card provided., • We provide Laptop, Phone, PDA, Workwear & PPE, • phs Perks (Partne...

You will have knowledge and experience of the following construction sectors; plant hire, tool hire, lifting, non‑mechanical, power generation hire, accommodation hire, hydraulic attachments or other specialist equipment hire. If you're an experienced Senior Hire Controller, Rental Manager, Hire D

Electrical Shift Engineer FM Service Provider Healthcare West London £45,000 CBW Staffing Solutions are currently recruiting an Electrical Shift Engineerto join a leadinghealth-care campus in West London. This site is a modern, state-of-the-art facility with multiple specialist areas and cutting-edge equipment. You will be part of a skilled team of engineers who know the site inside out and will help you get up to speed quickly. The campus supports a large workforce and offers excellent amenities including multiple food outlets and break areas, ensuring you have everything you need during your working day. This is a fantastic opportunity to work in a supportive, collaborative environment, maintain complex electrical systems, and gain experience across a variety of high-tech facilities Key duties & responsibilities Electrical maintenance including lighting, fault-finding, small installations, lamping, ballast changes, control panels, and power distribution Emergency lighting inspections and maintenance Air Conditioning: AHUs and FCUs (filter changes, cleaning, basic maintenance) Chiller re-sets and first-line troubleshooting Water treatment monitoring (temperature checks) Monitoring mechanical plant, pumps, motors, and plumbing (unblocking toilets, minor repairs) BMS system monitoring (hot & cold checks) Perform all allocated tasks professionally and within allocated timeframes Proactively identify, report, and resolve faults with building services equipment Maintain health & safety compliance, reporting/escalating issues where required Maintain clear communication with client staff and site management regarding service issues Escort specialist subcontractors when required Be flexible with site attendance and tasks within competency Working Pattern 4 on 4 off days and nights shift 07:00-19:00, 19:00-07:00 Package: Up to £45,000 25 days holiday + Bank holidays Overtime Opportunities - 1.5x & 2x at weekends Further training Pension Career Progression Requirements: Level 2 or 3 in Electrical Qualification 18th Edition Wiring Regulations Previous experience in a hospital, medical facility, or critical-care environment preferred Please send your CV to Fin Havering of CBW Staffing Solutions to avoid missing out on the role! TPBN1_UKTJ

Maintenance Working Supervisor FM Service Provider Central London Up to £55,000 per annum An exciting opportunity has arisen for a reliable and self-motivated Working Supervisor to oversee day-to-day engineering operations within a large, high-profile commercial building in Central London. This is a hands-on role managing a small team of engineers while remaining actively involved in delivering planned and reactive maintenance across the site. The successful candidate will work in a fast-paced environment, supporting the smooth operation of a busy multi-use property with a strong focus on service delivery, operational continuity, and presentation standards. You will liaise closely with senior management, specialist contractors, and support teams to ensure all building services are maintained to a high standard. Hours of Work Monday - Friday - 08:00am - 17:00pm Key Responsibilities Supervising and supporting a small on-site engineering team in the delivery of planned and reactive maintenance Carrying out routine plant inspections and ensuring all critical building systems remain fully operational Managing permit-to-work procedures and monitoring contractor activities across the estate Producing technical reports, maintenance updates, and compliance documentation Attending regular client and operational meetings to provide engineering support and site updates Acting as the first point of contact for mechanical and electrical faults and coordinating remedial actions Overseeing the maintenance of HVAC, power, lighting, and associated building services systems Liaising with specialist subcontractors and mobile support teams to ensure works are completed efficiently Monitoring PPM completion, maintaining accurate site records, and ensuring all reactive works are closed out within agreed timeframes Supporting the wider facilities operation to maintain high standards within a busy, high-profile environment About You Electrically or mechanically qualified (C&G Level 2 & 3) Proactive, organised, and able to problem-solve effectively Comfortable working with automated systems and modern building technology Calm, professional, and confident when dealing with clients and end users Flexible and willing to support emergencies when required (rarely, and fully supported) Please send your CV to Katie at CBW Staffing Solutions for more information. TPBN1_UKTJ

Construction Project Planner – Data Centre £75,000–£85,000 + 10% bonus + £6k car allowance + 25 days holiday + enhanced pension + hybrid working + PMI Site-based Harlow (with hybrid once embedded) James Lewis has been appointed by a multi-dimensional, MEP-led Principal Contractor to recruit a Construction Project Planner to support delivery of a major data centre scheme in Harlow. They operate across data centres, education, commercial, healthcare and science & technology projects in and around London and the Southeast, providing end-to-end services from design through construction, fit-out and maintenance. You will play a pivotal role in planning and monitoring their third data centre on this established campus, working closely with project managers, site teams and stakeholders to build, maintain and interrogate detailed programmes. Your planning insight will help ensure the project is delivered on time, within scope and in line with quality and technical standards. What you are delivering • Robust, fully logic-linked construction and MEP programmes for a live data centre project., • Clear timelines, milestones and resource plans aligned with contract requirements and site realities., • Early identification of risks, delays and clashes – with practical recovery and mitigation strategies., • Accurate, timely progress updates and reports for senior management, client and key stakeholders., • Seamless integration of design, procurement and construction activities through proactive planning., • Reliable forecasts on dates, costs and deliverables to support decision-making and commercial control. What you will run day to day • Programme production: create, develop and maintain detailed project schedules using Asta Powerproject and Primavera P6., • Planning workshops: work with project managers, construction leads and MEP teams to define key milestones, sequencing and resourcing., • Progress tracking: update programmes with actuals, measure performance against baseline and highlight variances., • Risk and delay analysis: identify critical path impacts, slippage and constraints; propose resequencing and recovery options., • Reporting: prepare short-interval look-aheads, progress reports and “what-if” scenarios for internal and client reviews., • Coordination: liaise with design, procurement and construction to ensure information release, material deliveries and installation activities align to programme., • Forecasting: analyse and forecast dates, productivity and deliverables to optimise efficiency and support commercial/claims narratives where required. What you need knowledge in • Construction planning on large, complex building projects – ideally critical infrastructure or MEP-heavy schemes., • MEP services sequencing and interfaces (plant, containment, distribution, testing and commissioning) within a main contracting environment., • Planning methodologies: critical path analysis, resource/loading, progress measurement and earned value basics., • Use of Asta Powerproject and Primavera P6 as core planning tools (build, maintain and report from both)., • How design, procurement and construction workstreams interact on fast-track, technically driven projects. What you need experience in • Proven experience as a Construction Project Planner on large-scale construction projects., • (Please note: careers spent predominantly in residential, rail, power/utilities or civils-only environments will not be suitable.), • Demonstrable planning input on projects with significant MEP content – data centres, healthcare, labs, commercial or similar., • Hands-on proficiency in both Asta Powerproject and Primavera P6 (essential)., • Strong communication skills with the ability to challenge, support and collaborate with multi-disciplinary teams., • A proactive, solutions-focused approach to anticipating issues and developing practical mitigation plans., • Degree in construction management, engineering or similar is preferred but not essential where experience is strong. Permanent hires receive the full benefits package including £6k car allowance, 10% bonus, travel expenses, enhanced pension, hybrid working and PMI. Interested? Send your CV and we’ll run you through the project and progression opportunities in detail

Shift Engineer - FM Service Provider - Critical Data Centre - Stockley Park - £52,000 A fantastic opportunity to work for an established FM service provider situated in Slough who are looking for a Shift Engineer. The successful candidate will be electrically biased with a wealth of building maintenance experience. He or she will be based in a critical data centre in Slough. In return the company is offering a competitive salary paying £52,000 based on experience / qualifications and career progression. Hours of work Continental Shift Pattern - Days & Nights 06:00am to 18:00pm & 18:00pm to 06:00am Key duties & responsibilities Ensure that Planned Preventative Maintenance & Reactive maintenance is carried out to all client assets through operation of Planned Preventative Maintenance System. Ensure that accurate and comprehensive records are kept pertaining to Health & Safety, Building Compliance and Quality Assurance. Ensure that sub-contractors perform to meet the requirement of the contract. Administer sub contractor work approvals and safe operation while repair or service is carried out on site. Ensure that plant faults and defects are swiftly remedied to maintain plant in serviceable order at all times. Ensure that suitable spares are available to carry out maintenance of the above plant. Ensure that comprehensive maintenance records are completed in the form of job sheets. Ensure that Method Statements and Risk Assessments are prepared, reviewed and utilised for all tasks (PPM's and reactive) carried out to ensure safe working practices. Manage the shift team To maintain & develop good client relationships. Ensure assigned tasks are actioned and completed as appropriate, including the utilisation of the shift engineers to ensure the task is suitably completed. To undertake annual appraisals of your shift engineers To ensure the shift team are suitably skilled and trained, and appropriate training plans are drafted and implemented. Package £52,000 AP Training 22 Days Shift Holiday Pension Plent of overtime available Career Progression Training (Internal and External Courses) Free on site Parking Requirements Electrically qualified City & Guilds - Level 3 City & Guilds - 18th Edition HV / LV Desirable A proven track record in Building Maintenance working Good Communication Skills. Multi-Skilled - Mechanical / Electrical. Knowledge of UPS / Generators / Power Distribution / HVAC / HV LV etc Good Leadership & Management skills Please send your CV to Fin Havering - Cbw Staffing Solutions for more Information! TPBN1_UKTJ

Murphy is recruiting for a Senior Site Engineer to work with Energy Team on the National Grid, Uxbridge Moor Project. Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Senior Site Engineer: Establish and promote best practice in health, safety and environmental matters in conjunction with the SHQE department. Assist with temporary works design schemes Maintain good working relations with client / designer / Team, together with our supply chain. Advise engineers on setting out methods and techniques. Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works. Formally request any missing information in sufficient time to allow the programme to proceed without delay. Communicate with foremen and supervisors to ensure full understanding of information provided. Overseeing the selection and requisition of materials and plant for the use in the construction process. Prepare written risk assessments and method statements for the control of the works. Keep a full and accurate daily site diary, including any changes/variations, subcontractors’ attendance, and records of work related discussions with client / designer / project team. Ensure that inspection and test plans are completed as required by the PMP / Specification, including a check of dimension accuracy and quality Still interested, does this sound like you? Experience in Construction or Civil Engineering projects. Experience within ITPs, RAMs & Temporary Works. Excellent knowledge of current civil engineering legislation as well as Health & Safety and Environmental legislation. Ability and confidence to discuss engineering issues with people across various levels and disciplines. Ability to produce, implement and manage safe systems of work for construction procedures

Murphy is recruiting for a Senior Engineer to work with the Energy Team on the National Grid, Uxbridge Moor Project. Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Senior Site Engineer: Establish and promote best practice in health, safety and environmental matters in conjunction with the SHQE department. Assist with temporary works design schemes Maintain good working relations with client / designer / Team, together with our supply chain. Advise engineers on setting out methods and techniques. Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works. Formally request any missing information in sufficient time to allow the programme to proceed without delay. Communicate with foremen and supervisors to ensure full understanding of information provided. Overseeing the selection and requisition of materials and plant for the use in the construction process. Prepare written risk assessments and method statements for the control of the works. Keep a full and accurate daily site diary, including any changes/variations, subcontractors’ attendance, and records of work related discussions with client / designer / project team. Ensure that inspection and test plans are completed as required by the PMP / Specification, including a check of dimension accuracy and quality Still interested, does this sound like you? Experience in Construction or Civil Engineering projects. Experience within ITPs, RAMs & Temporary Works. Excellent knowledge of current civil engineering legislation as well as Health & Safety and Environmental legislation. Ability and confidence to discuss engineering issues with people across various levels and disciplines. Ability to produce, implement and manage safe systems of work for construction procedures

Multi-Skilled Maintenance Engineer Location: Hillingdon Job Type: Temporary Duration of booking: Expected to last 6 months with possible extension Proposed start date: ASAP Pay Rates: Up to £23 per hour Umbrella or £20 per hour PAYE inclusive of holiday pay Hours / Working Days: 37.5 hours per week / Monday to Thursday, 8am – 4.30pm Friday’s 8am – 4.00pm Sector: Healthcare Based: Office / Hospital Job Summary The Estates Maintenance Multi-Skilled Technician is a key member of the Estates maintenance Department, providing daytime operational support to ensure continuity of maintenance services. The post holder will undertake a wide range of reactive and planned maintenance tasks across mechanical, electrical, and building-fabric disciplines, ensuring systems remain safe, compliant, and operational. Key Result Areas Reactive Maintenance Respond to maintenance requests via Helpdesk Diagnose and repair mechanical, electrical, and fabric faults Ensure all works are completed safely and within SLA timeframes Undertake temporary repairs where immediate permanent fix is not possible Mechanical & Plumbing Maintain heating, hot/cold water systems, pumps, valves, and pipework Carry out repairs and system reinstatement Assist with plant maintenance including steam boilers and pressurisation systems Electrical Diagnose and repair faults on lighting, power, and distribution systems Replace fittings, switches, and components Undertake safe isolations in line with HTM guidance Building Fabric Carry out general repairs including doors, locks, ceilings, and finishes Undertake minor joinery and fabric works Planned Preventative Maintenance (PPM) Undertake routine PPM and compliance checks Record all maintenance activity via CAFM/PDA systems Support statutory compliance requirements Building Management Systems (BMS) Monitor plant performance and alarms Assist in maintaining environmental control systems Person Specification Education & Qualifications (Essential) NVQ Level 3 / City & Guilds in Mechanical, Electrical, or Building Services Engineering Completed apprenticeship or equivalent training Multi-skilled capability across at least two disciplines Experience (Essential) Experience in reactive and planned maintenance Fault finding across mechanical and/or electrical systems Experience working in a multi-disciplinary environment Use of CAFM or electronic work-order systems Skills & Knowledge (Essential) Strong fault-finding and problem-solving ability Knowledge of: HTMs Health & Safety legislation Ability to work independently and manage workload Good communication and IT skills Desirable NHS or healthcare environment experience Competent Person / AP exposure Experience with BMS systems

Job Title: Mobile Electrical Supervisor Location: London & Berkshire (Van Mobile - 32 Sites) Hours: Monday-Friday, 08:00-17:00 Reporting to: Electrical Supervisor Salary: £48,000 - £50,000 per annum + company van Role Overview We are seeking a Mobile Electrical Supervisor to support the delivery of planned preventative maintenance (PPM) and reactive maintenance across a portfolio of 32 commercial sites. This is a van-mobile supervisory role, primarily covering London and Berkshire. You will play a key leadership role within the contract, supporting the Contract Manager and Electrical Supervisor in ensuring all engineering works are delivered safely, efficiently, and in line with KPIs and client expectations. This is a hands-on supervisory position, combining technical electrical expertise with team leadership, subcontractor management, and client-facing responsibilities across a multi-site portfolio. Key ResponsibilitiesOperational & Technical Delivery Deliver electrical PPM and reactive maintenance across a 32-site portfolio Diagnose and repair faults on electrical distribution systems, control panels, lighting, power, emergency lighting, and associated plant Support HVAC systems from an electrical controls perspective Carry out minor installation works including relays, contactors, sensors, and motors Ensure all works comply with BS 7671 Wiring Regulations and site proceduresSupervisory & Mobile Site Leadership Supervise engineers and subcontractors across a 32-site mobile portfolio Plan and prioritise daily workload across multiple London and Berkshire locations Provide daily coordination and support to engineers in the field Act as technical escalation point for complex faults and site issues Support recruitment, onboarding, and development of engineers Conduct performance reviews and support staff development Manage absence, performance, and disciplinary issues where requiredSkills & Experience Required NVQ Level 3 Electrical Installation (or equivalent) City & Guilds 18th Edition (essential) City & Guilds 2391 Inspection & Testing (desirable) Proven experience in commercial building maintenance (3-5+ years minimum) Strong supervisory / leadership experience in a mobile or multi-site role Full UK driving licence required

Shift Leader 4ON 4OFF (DAYS ONLY) - FM Service Provider Marble Arch, London £53,000per annum A leading FM service provider is seeking a Shift Leader to join a high-profile, mixed-use development in the heart of central London. The site brings together premium office space, flagship retail, and luxury residential living, all maintained to an exceptional standard. Youll be part of a dedicated, site-based engineering team within a technically advanced, business-critical environment. Working in a small shift team of one to two engineers, youll take responsibility for both the technical and operational delivery on shift, ensuring plant performance, compliance, and a consistently high level of service across the building. Hours of work Days ONLY 4 on 4 off 7am - 7pm Key Duties Ensure Planned Preventative Maintenance (PPM) & Reactive Maintenance is carried out on all client assets using the maintenance system Manage the shift engineering team Carry out hands-on maintenance work when required Ensure plant faults are quickly resolved to maintain continuous operation Perform regular quality checks on work activities, documentation, and housekeeping Ensure suitable spares are available to support ongoing maintenance Maintain accurate maintenance records and job sheets Prepare, review, and use Method Statements and Risk Assessments for all tasks to ensure safe working practices Requirements Fully qualified electrically or mechanically to a recognised standard Proven experience in building maintenance within a critical site (commercial, blue-chip, or banking) Strong communication skills Multi-skilled knowledge mechanical/electrical including UPS, generators, and power distribution Good leadership and management skills TPBN1_UKTJ

Reporting to – Head of Mechanical Maintenance Working Hours: Mon – Fri, 8am – 5pm Probation Period: 6 months Job Type: Full Time, Permanent Job Location: Various Sites & Head Office Start Date: Immediate SCOPE 1. To provide leadership and technical oversight within the Water Services department, with a primary focus on statutory L8 compliance, water hygiene, plumbing, drainage and pump maintenance safety management., 2. East West Connect provide Building Services Maintenance (Reactive, Planned Preventative and Small Works) across RVAC, Gas/Heating, Water Services, Fire & Security and Electrical Compliance., 3. This role supports continued company growth and service quality by ensuring safe, compliant and efficient delivery of all water‑related works. KNOWLEDGE, COMPETENCY REQUIREMENTS 1. Prior knowledge of company policies and procedures for delivering safe and compliant water services in commercial and domestic environments (E), 2. Experience working within an employer’s integrated management system (D), 3. HNC/HND Building Services or Mechanical Engineering – NVQ Level 5 or above (E), 4. Experience with CAFM/CMMS (D), 5. Knowledge of SFG20 maintenance schedules (D), 6. Commercial H&S Awareness Course (D), 7. Full clean driving licence (E) This section provides guidance on competency requirements for the Water Services Manager responsible for delivery and compliance across water systems (water hygiene, closed-loop water quality, pumps, LTHW/LTHH interfaces, domestic and commercial plumbing systems, soil/vent and drainage). Competence should be evidenced through qualifications, relevant experience, and demonstrable ability to plan, supervise, assure and report compliant works. Statutory compliance & water hygiene (ACOP L8 / HSG274 / BS 8580) • Understands legal duties and roles (Duty holder/Responsible Person/Authorised Person as applicable), and can support governance for ACOP L8, HSG274 Parts 1–3 and BS 8580-1 requirements., • Can implement and maintain a Written Scheme of Control: task schedules, responsible persons, escalation routes, corrective actions and record-keeping., • Can review/quality-check legionella risk assessments, schematics, asset registers and logbooks; identify gaps and drive closure., • Can manage monitoring regimes (temperatures, flushing, inspections, tank checks, TMV checks) and interpret results to prioritise remedials., • Understands sampling strategy and actions (e.g., legionella, TVC) including liaison with UKAS labs and applying appropriate corrective controls., • Can plan and supervise remedial works (tanks, calorifiers, dead-legs, insulation, blending valves, pipework alterations) ensuring verification and revalidation., • Can lead/participate in internal audits and client audits; produce evidence packs and close out non-conformances., • Can manage incidents (positive samples, loss of control, contamination) with clear containment, communications and documented lessons learned. Closed-loop water quality (LTHW/LTHH & sealed systems) • Understands closed-loop system purpose and common failure modes (corrosion, scaling, microbiological growth, air ingress, fouling) and the impact on plant efficiency and asset life., • Can specify and manage water treatment regimes (inhibitors/biocides as applicable), sampling frequency, target parameters and reporting., • Can interpret water analysis results (e.g., pH, conductivity/TDS, inhibitor residual, iron/copper, microbiological indicators where applicable) and initiate corrective actions., • Can plan and oversee cleaning/flushing activities (power flush, side-stream filtration, chemical clean) including method statements, waste handling and reinstatement testing., • Understands interfaces with LTHW/LTHH plant (boilers, heat exchangers, pressurisation units, expansion vessels, air/dirt separators) and can coordinate works to minimise operational risk., • Can manage specialist subcontractors and verify deliverables (pre/post samples, certificates, commissioning sheets). Pumps, booster sets & pressurisation systems • Working knowledge of common pump systems: domestic boosters/pressurisation, circulation pumps, sump/effluent pumps, macerators, condensate pumps and associated controls., • Can plan PPM and reactive response: set-point checks, vibration/noise checks, seal/bearing indicators, strainers, non-returns, isolation valves and control panel alarms., • Can coordinate safe isolations (electrical and hydraulic), drain-down/refill, venting and functional testing/commissioning., • Can oversee troubleshooting and ensure evidence-based repairs (fault codes, trend data, flow/pressure checks)., • Can manage specialist OEM/subcontractor support and validate handover documentation (test results, settings, photos, certificates). Domestic & commercial plumbing systems (hot/cold water) • Understands hot and cold water distribution principles in domestic and commercial buildings, including storage, recirculation and temperature control., • Working knowledge of Water Supply (Water Fittings) Regulations/Byelaws, backflow prevention (air gaps, RPZ where applicable), and good practice installation standards., • Can manage TMV lifecycle: selection/fit-for-purpose, routine testing, fail-safe checks, servicing and documentation., • Can plan and supervise installation/modification works: isolation strategy, phased shutdowns, commissioning, disinfection/chlorination where required, and reinstatement verification., • Can assess defects and risks (dead legs, stagnation risk, scalding risk, cross-connections, inadequate insulation) and produce remedial plans and quotations. Soil, vent & drainage systems • Understands soil and vent principles, traps/seals, venting, odour issues and common failure modes in above/below ground drainage., • Can manage planned and reactive drainage works including jetting, descaling, root ingress treatment, minor repairs and renewal planning., • Can interpret CCTV survey outputs and translate findings into remedial scope, priority and costed plans., • Understands environmental and H&S controls relevant to drainage works (waste handling, contamination risks, COSHH, and confined spaces awareness where applicable). Project / contract management (delivery, commercial & governance) • Can define scope from surveys/specifications, develop method of delivery, and produce programmes that protect statutory compliance and site operations., • Competent in procurement and subcontractor management: pre-start reviews, competence checks, RAMS review, supervision, and performance management., • Can control cost, labour and materials; produce accurate quotations; manage approvals, purchase orders and invoicing inputs., • Understands change control: identifying variations, pricing, client sign-off, and maintaining a clear audit trail., • Can manage risk and dependencies (access, isolations, permits, shutdown windows, customer impact) and coordinate stakeholders., • Can produce client-ready deliverables: reports, certificates, O&M information (where required), commissioning records and compliance evidence packs. Leadership, competence assurance & quality • Can supervise multiple workstreams while maintaining quality, safety and compliance; knows when to escalate technical risk., • Can set and maintain a competency matrix for engineers and subcontractors (water hygiene, plumbing, pumps, drainage), including refresher intervals and evidence control., • Can carry out technical and documentation QA checks (service sheets, logbooks, photos, certificates) and reduce rework/returns., • Can coach and develop team members through site visits, toolbox talks (supplementary) and targeted training plans., • Can monitor performance against KPIs/SLA and lead corrective actions for recurring defects and non-conformances. Health, safety & environmental competence (water-related works) • Can review and implement RAMS and site permits relevant to water works (e.g., isolations, hot works where applicable, working at height, plantrooms, lone working)., • Understands COSHH principles for water treatment chemicals and can ensure safe storage, dosing, handling and waste disposal arrangements., • Can ensure safe system of work for drain-down/refill, disinfection, sampling and access to tanks/voids/risers (including confined spaces awareness where applicable)., • Can investigate incidents/near misses and implement corrective actions through the IMS. Typical evidence (minimum/desired) Essential evidence: demonstrable experience managing compliant water services delivery in occupied buildings; proven ability to manage subcontractors and control quality/compliance records; strong working knowledge of ACOP L8 and HSG274 requirements; competent report writing and client communication. Typically desired (role dependent): recognised water hygiene/legionella qualification (e.g., City & Guilds/LCA/WMSoc pathway), plumbing qualification (NVQ L2/3) and/or relevant building services qualification; demonstrable experience managing closed-loop water treatment and pump/pressurisation systems; WRAS knowledge/certification. CPD: maintains ongoing CPD covering water hygiene compliance, water treatment/closed systems, and relevant H&S/commercial contract management topics. DUTIES Team Leadership & Management • Lead a team of Plumbers, Water Hygiene Technicians, Pump Engineers and Drainage Engineers to deliver safe, compliant and high‑quality services., • Provide technical mentorship, support and operational direction., • Identify recurring issues and implement root‑cause corrective improvements., • Facilitate regular team meetings focusing on performance, compliance and continual improvement., • Monitor KPIs, conduct 1‑2‑1 reviews, identify training needs and prepare management reports., • Use SFG20 schedules to optimise PPM planning, statutory L8 compliance and resource allocation. Technical Support & Problem‑Solving • Act as the senior technical authority for all plumbing, drainage, pumps, water hygiene and water treatment operations., • Provide escalation support for complex technical issues, commissioning tasks and diagnostic work., • Ensure all works follow statutory guidance, industry best practice and manufacturer recommendations., • Review water treatment reports, logbooks, legionella monitoring records and compliance documents prior to client submission., • Promote technical excellence and hands‑on development within the team. Water Hygiene, L8 Compliance, Auditing & Accreditation • Lead water compliance across all operational sites., • Ensure full compliance with:, • ACOP L8, • HSG274 Parts 1–3, • BS 8580‑1 – Legionella Risk Assessment, • Water Supply (Water Fittings) Regulations, • Manage internal audits of water hygiene tasks, sampling regimes, monitoring results and engineer competencies., • Ensure all logbooks, monitoring sheets, flushing records, sampling data and remedial actions are accurate and complete., • Oversee water treatment activities for closed systems, calorifiers, cooling towers (if applicable), chlorine dioxide dosing and softening systems., • Maintain readiness for external audits including LCA and client audits., • Investigate water hygiene incidents, non‑conformances and near misses, implementing corrective actions. Plumbing, Drainage & Pump Operations • Oversee maintenance and remedial works across:, • Hot & cold water plumbing systems, • Drainage networks (internal/external), • Booster sets, pressurisation units and general plumbing pumps, • TMVs, calorifiers, tanks and expansion vessels, • Ensure assets are verified and documented appropriately., • Conduct lifecycle assessments and make recommendations for repair, upgrade or replacement., • Ensure correct isolation, drain‑down, reinstatement and testing procedures are followed. Asset Management & Lifecycle • Maintain accurate asset registers and statutory documentation., • Prepare quotations aligned with client budgets and technical requirements., • Use CAFM/CMMS platforms to manage compliance tasks, asset information and performance metrics. Health & Safety Management • Ensure full adherence to Health & Safety policies, RAMS and CPPs across all works., • Promote a strong safety culture, ensuring PPE compliance and safe working practices., • Deliver toolbox talks, safety briefings and awareness training. Continuous Improvement & Innovation • Identify improvements to maintenance processes, reducing costs and improving performance., • Stay updated on emerging technologies, water treatment methods and regulatory changes., • Encourage innovation within the team and evaluate new products and tools for operational benefit., • Consistently champion the company’s core values across all activities. MEETINGS • Attend and prepare reports for management meetings., • Attend pre‑bid and interim bid meetings to provide technical input., • Attend client meetings, recording all discussions., • Attend handover and tender meetings, ensuring accurate documentation., • Attend post‑contract review meetings and track improvement actions., • Attend appraisal meetings, company staff meetings, H&S meetings and team meetings. See full job description for more information

Arabellesolutions is seeking a Mechanical Supervisor to oversee installation, inspection, and maintenance activities in the power generation industry.

This is a competitive position within a leading operator in the Power Generation sector, focusing on a collaborative environment to support efficient plant operations. United Cerebral Palsy of Georgia is seeking an Operations Technician for their Power Station in East London.

FieldCore is seeking a Machinist to operate mobile equipment and perform on-site machining for power plant equipment.

Metlen Energy & Metals Plc is seeking a Project Manager with over 10 years of experience in the energy sector.The role involves developing and implementing comprehensive project plans, coordinating across teams, and managing project budgets.The ideal candidate will possess a Bachelor's degree in Eng

United Cerebral Palsy of Georgia is seeking a Mechanical Technician to join their Energy from Waste plant team in Gloucestershire. The ideal candidate will have experience in power generation and possess strong skills in health and safety compliance.

ASTUTE Technical Recruitment Ltd is seeking a Mechanical Technician for a leading Energy company in Hertfordshire, UK.The role offers a starting salary of up to £50,000 along with an attractive benefits package, including bonus and medical insurance.The ideal candidate will have a minimum of three

Veolia is seeking a Maintenance Engineer at Chilton Power Station in Durham.

Experience within power plant repair and maintenance is essential. ASTUTE Technical Recruitment Ltd is recruiting for a Mechanical Fitter to join the new build OCGT plant project in Lincolnshire.

Applicants should have a degree in electrical engineering, with extensive experience in power plant construction. Morson Human Resources Limited is seeking an Electrical professional for the Hinkley C power station project located near Bridgwater, Somerset.

ASTUTE Technical Recruitment Ltd is looking for a Site Administrator for a 12-month contract based in Scotland.The role involves managing site documentation, providing administrative support, and coordinating communication among various stakeholders.The position offers a rate between £200-£250 per

Rolls-Royce SMR Limited is seeking an Engineering Manager to lead a multi-disciplinary team on an RRSMR power station design project.

SSE plc is seeking a Mechanical Engineer at Medway Power Station, Kent, to maintain key mechanical assets and ensure optimal plant performance. The position requires a degree in mechanical engineering and strong knowledge of power generation systems. You'll report to the Lead Balance of Plant Engine

Thorough technical knowledge of I&C systems, power plant operations, and site construction execution.

A leading recruitment agency is seeking an Operations Asset Manager for Power Plants in the UK. Candidates should have a degree in Engineering and over 10 years of experience in the power industry, particularly with steam and gas turbines.

Ramboll is seeking a Powerplants and Generators Specialist to join their team in Greater London. The role involves detailed engineering design for power plants and synchronous machines, working on large-scale projects in a collaborative environment. Candidates should have proven expertise in power g

The role involves developing engineering solutions to ensure robust hazard protection for power stations.

Broughton Group is seeking a Plant Operator for their Wood Chip Power Plant in Milton Ernest, Bedfordshire. Ideal candidates should have a background in power plant operations and a keen attention to detail. The role involves overseeing daily plant operations and performing regular checks on equipme

SCINERGY Recruitment Limited is seeking a Mechanical Team Leader for an energy from waste power station in Gloucestershire. You should have extensive experience in power generation and strong leadership skills.

Energy Jobline CVL in Bedford is offering an exciting Entry-Level Shift Technician role where no prior experience is required.The position supports career growth in engineering and industrial operations with full training provided.Shifts may include days and nights, requiring flexibility for overtim

In this hybrid position, you will be responsible for analyzing the performance of the nuclear power station, covering the entire energy conversion system. Rolls-Royce SMR is seeking an Engineer – Plant Performance to join the Performance & Analysis team in the United Kingdom.

The ideal candidate will have a degree in Electrical and Control Engineering and extensive experience in power plant operations. Uniper is seeking an experienced professional to manage engineering strategies for power plants in Greater London.

A leading energy solutions provider is seeking a Senior BIM Engineer for a hybrid role based in Derby, Manchester, or Warrington.This position focuses on driving BIM coordination and implementing standards across disciplines, ensuring the delivery of a high-quality information management framework.C

A modern power generation facility seeks an Entry-Level Shift Technician/Trainee Plant Operator in Bedford.

Seeking a candidate with extensive engineering experience in power generation for risk management and financial risk reduction within an insurance context.

Field Based Electrical Maintenance Engineer (Renewables).Vehicle + Technical Progression + Pension + Holidays.Field Based - North of England - Manchester, Leeds, Sheffield, Hull, Newcastle, Wakefield, York.Are you a time served electrician / electrical maintenance engineer from a building services b

Seeking a Senior Power Risk Engineer for a remote role to analyze complex technical challenges and influence underwriting decisions for global energy assets, focusing on conventional and renewable generation.

Producing design drawings, mechanical plant selection and specification. Responsible for the design of mechanical installations typically including municipal water and wastewater pumping stations, screens, grit removal plant, penstocks, valves, odour control systems, pipework etc. Producing plant la

Producing design drawings, mechanical plant selection and specification. Preparing design of mechanical installations typically including municipal water and wastewater pumping stations, screens, grit removal plant, penstocks, valves, odour control systems, pipework etc. Producing plant layouts, tec

Create design drawings, select mechanical plant, and prepare technical specifications.