Trabajos power plant en DerbyCrear alertas

Integrity / Plant Engineer (Pressure Systems) Conventional Power and Clean Energy Industries (Biomass and Energy from Waste). About Us Risktec Solutions Ltd is an established, independent engineering and risk management consultancy. We help clients to manage health, safety, security, environmental (HSSE) and business risk in sectors where the impact of loss is high. Our people are high calibre and m... ZIPC1_UKTJ

Non Destructive Test Engineer (NDT) Background Risktec Solutions is an established, independent and specialist risk management consulting and training company, and is part of the TV Rheinland Group. We assist clients in major hazard industries including oil and gas, clean energy, nuclear and transportation, as well as commercial and public sectors, to manage health, safety, security, environmental and business risk. Our people are high calibre professionals, with a strong focus on meeting clients expectations. We are seeking experienced NDT Engineers with specific pressure systems knowledge to take up positions in its expanding Asset Integrity Management team based in Derby, UK. The successful candidates will play a key role in delivering solutions for our clients. Most of the teams activities are focused on the Conventional Power and Clean Energy sectors (primarily CCGT, Biomass and Energy from Waste plants). Duties and responsibilities will include: • Site visits to carry out plant inspections., • Coordinating / supervising inspection activities e.g. on outages (depending on qualifications and experience)., • Producing high quality inspection reports., • Reviewing and authorising inspection reports (depending on qualifications and experience)., • Estimating and managing project costs., • Maintaining up-to-date knowledge of standards, legislation, good practice, methods and use of appropriate equipment and software., • Good practical experience in the inspection of a range of plant components, in particular steam and water pressure parts (both in the new / as-installed condition and after in-service degradation has taken place)., • An appreciation of the damage / degradation mechanisms that can take place on the components being inspected., • Experience in the ultrasonic testing of branch connections., • As a minimum you must hold PCN Level 2D certification in magnetic particle testing, penetrant testing and ultrasonic testing of welds., • The following would be a particular advantage:, • Certification to PCN Level 2 in phased array ultrasonic testing and / or TOFD., • Certification to PCN Level 3 in any testing method., • Project management experience., • Profit Share, • Pension (7.5% company contribution), • Life Assurance, • Permanent Health Insurance, • Private Medical Insurance, • Employee Assistance Programme, • Flexible Leave, • Flexible Working, • Employee Discounts, • Salary Sacrifice Options, • Professional and Postgraduate Training, • Professional Subscriptions, • Skills Training JBRP1_UKTJ

Astute's Power Team are working with a global technical services and engineering consultancy to recruit for a Principal Integrity Engineer, specialising in Pressure Systems, to join their expanding Asset Integrity management team. This is a senior, permanent opportunity where you'll lead the delivery of high-value engineering solutions, supporting major clients across the Conventional Power and Clean Energy sectors - including CCGT, Biomass and Energy from Waste facilities. If you would like to discuss this role & the package available, please get in touch. Responsibilities and duties of the Principal Integrity Engineer role: You will be responsible for: • Carrying out integrity assessments of defective or degraded power plant components operating at both low and high temperatures, using techniques such as reverse engineering calculations, fracture mechanics and finite element analysis (FEA)., • Ensuring compliance with relevant legislation and standards, including the Pressure Systems Safety Regulations 2000 (PSSR)., • Supporting and delivering power plant inspections, including steam and water pressure parts, boiler tube surveys and structural/support assessments., • Evaluating materials performance, degradation mechanisms and remaining life to inform asset management decisions., • Providing mechanical engineering expertise to support plant operations, maintenan...

Astute's Power Team are working with a global technical services and engineering consultancy to recruit for a Principal Integrity Engineer, specialising in Pressure Systems, to join their expanding Asset Integrity management team. This is a senior, permanent opportunity where you'll lead the delivery of high-value engineering solutions, supporting major clients across the Conventional Power and Clean Energy sectors - including CCGT, Biomass and Energy from Waste facilities. Candidates must have a degree in a relevant field, have at least 5 - 10 years Power Generation experience and be a Subject Matter Expert in PSSR / Asset Integrity / Mechanical Plant. If you would like to discuss this role & the package available, please get in touch. Responsibilities and duties of the Principal Integrity Engineer role: You will be responsible for: Carrying out integrity assessments of defective or degraded power plant components operating at both low and high temperatures, using techniques such as reverse engineering calculations, fracture mechanics and finite element analysis (FEA). Ensuring compliance with relevant legislation and standards, including the Pressure Systems Safety Regulations 2000 (PSSR). Supporting and delivering power plant inspections, including steam and water pressure parts, boiler tube surveys and structural/support assessments. Evaluating materials performance, degradation mechanisms and remaining life to inform...

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where you'll be working? We help our clients safeguard the water supply, improve environmental performance and manage demand for future generations. We enhance and extend asset life, ensuring compliance with water quality and environmental standards. Were problem solvers with over 140 years of combined experience in engineering and infrastructure. This role will be withinour MEICA and capital maintenance team. Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. Key Responsibilities • Install, maintain and repair control and instrumentation equipment across power generation plant and associated systems., • Carry out calibration, testing and verification of field instruments to ensure optimal performance and accuracy., • Install, configure and maintain instruments measuring pressure, flow, temperature and level., • Perform routine inspections, preventative maintenance and functional testing of C&I systems to ensure compliance with safety and operational standards., • Read and interpret P&IDs, loop diagrams, wiring schematics and control system drawings to support fault finding and installation works., • Diagnose and troubleshoot faults on control systems including PLC, SCADA and DCS platforms., • Carry out loop checks, signal verification and commissioning activities on new and existing plant systems., • Ensure instrumentation and control systems operate accurately, reliably and within specification., • Record all maintenance and calibration activities in relevant systems and documentation (including CMMS / calibration databases)., • NVQ Level 3 in Control & Instrumentation, Electrical Engineering or equivalent (essential)., • 18th Edition Wiring Regulations (desirable)., • Full UK Driving Licence., • Strong knowledge of control and instrumentation systems within power generation environments., • Proficient in calibrating, maintaining and troubleshooting instrumentation including sensors, transmitters and control valves., • Experience using Beamex calibrators for accurate field calibration and verification of instruments., • Knowledge of Beamex CMX calibration management database highly desirable., • Competent in loop checking, signal testing and control system fault finding., • Knowledge of PLC, SCADA and DCS control systems used in power station operations., • Ability to read and interpret P&IDs, loop diagrams, wiring schematics and control drawings., • Understanding of process control systems and power generation plant operations., • Familiarity with safety systems, interlocks and critical protection instrumentation. #MGroupW INDREG IND2 JBRP1_UKTJ

What you'll be doing D200 Energy Centre is a Boots owned, purpose-built Combined Heat and Power (CHP) Station. Operating 24/7 365, controlled by a sophisticated distributed control system, it provides steam, electricity, medium pressure hot water and compressed air to the Nottingham site. As part of Engineering Facilities Management (EFM), our team of Electrical, Instrumentation, Control, Mechanical and Site Services Maintenance Engineers and Station Controllers are focussed on delivering the highest-level of service to the Nottingham site. The Energy Centre team is responsible for the above services along with the provision of other site utilities and services including gas, high voltage electricity, water and effluent. The team is looking to recruit a multi-skilled engineer with strong electrical bais to carry out maintenance, repair and compliance duties on all utilities within D200 and the Boots Beeston site. The individual will also be expected to undertake shift relief cover for a Station Controller Key responsibilities • As part of the D200 maintenance team you will carry out planned and reactive maintenance activities within D200 and on the Boots Beeston site whilst following safe systems of work., • After familiarisation and training you will be responsible for the management of statutory maintenance of the Beeston site High Voltage network, carrying out AP/SAP duties., • Use expertise and to make strong well-informed decisions to prioritise tasks to ensure safe, reliable and efficient supply of utilities across site., • Provide support and guidance to other team members and technical assistance as and when required., • Positively respond to abnormal or emergency situations, making prompt decisions to minimise potential disruptions to stakeholders., • Carry out first line fault finding on the plant, identifying defective equipment and replace/repair as required., • Participate in the continuing development and review of standard operating procedures and safe systems of work., • Be flexible with regards to the nature of any task, being effective and presentable at all times., • Comprehensive training will be provided to undertake shift relief for Energy Centre Shift Operations Controllers. D200 is 24/7 365 operation, therefore it is essential that technicians are able to cover for controller holiday and absence.What you'll need to have (our must-haves), • Time-served electrical apprenticeship., • C&G Level 2 and 3 Diploma Electrical Installation (or equivalent)., • C&G 2391-52 Test & Inspection (desirable)., • 18th edition., • Significant mechanical experience., • Knowledge and understanding of High Voltage systems., • Understanding and appreciation of industrial processes., • Understanding and appreciation of steam systems., • Knowledge and understanding of Health & Safety obligations in an engineering environment and safe systems of work., • Must be prepared to work out of hours and shifts when required., • A positive 'can do' attitude whilst working alone or as part of a team., • A full valid UK driving license.Rewards designed for you, • Boots Retirement Savings Plan, • Discretionary annual bonus, • Generous employee discounts, • Enhanced maternity/paternity/adoption leave pay and gift card for anyone expecting or adopting a child, • Flexible benefits schemeincluding option to buy additional holiday, discounted gym membership, life assurance, activity passes and much more. Boots is a Ban the Box employer and will consider the suitability of applicants with criminal convictions on a case-by-case basis. We hope to hear from you soon. Be brilliant with Boots. JBRP1_UKTJ

Job Description Job Description FPGA Engineer Full Time Derby or Glasgow You will work within our safety critical FPGA development team across all phases of the design lifecycle from requirements elicitation through to equipment testing. The team uses agile SCRUM methods to develop high integrity FPGA based applications adopting the latest state-of-the-art toolsets. Training will be provided where required to equip you with the skills necessary to develop requirements, architectures, designs, HDL code, associated tests and supporting infrastructure for applications essential for the protection and monitoring of a nuclear propulsion plant. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing You will follow a safety critical development lifecycle to: Develop requirements, from equipment to implementation level, for FPGA based designs Develop and Verify VHDL code Support hardware-based testing of your designs Author and review design documentation You will liaise with Software, Hardware, Systems and Verification teams to ensure customer expectations are met effectively and efficiently You will contribute to the continuing improvement of the development processes and product quality Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Be qualified to Degree level (or equivalent experience) in Electronics Engineering, Computer Science, or related discipline Be experienced in designing and verifying designs expressed using VHDL Have the ability to provide clear, concise and accurate technical reports Experience of the following, whilst not essential, would be beneficial: Languages: SystemVerilog TCL Python Tools: Siemens - QuestaSim / ModelSim Siemens - Questa PropCheck Siemens - FormalPro Synopsys - Synplify Pro IBM® Engineering Requirements DOORS Azure DevOps Git Standards, Frameworks and Techniques Knowledge and experience of safety standards such as IEC 61513, IEC 62566, IEC 26262, DO-254 UVM Constrained Random Testing Formal Verification We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Electrical and Electronics Posting Date 22 Jan 2026; 00:01 Posting End Date PandoLogic. Keywords: FPGA Engineer, Location: Derby, ENG - DE23 8NX

Astute's Power Team are working with a global technical services and engineering consultancy to recruit for a Principal Integrity Engineer, specialising in Pressure Systems, to join their expanding Asset Integrity management team. Be one of the first applicants, read the complete overview of the role below, then send your application for consideration. This is a senior, permanent opportunity where you'll lead the delivery of high-value engineering solutions, supporting major clients across the Conventional Power and Clean Energy sectors - including CCGT, Biomass and Energy from Waste facilities. If you would like to discuss this role & the package available, please get in touch. Responsibilities and duties of the Principal Integrity Engineer role: You will be responsible for: • Carrying out integrity assessments of defective or degraded power plant components operating at both low and high temperatures, using techniques such as reverse engineering calculations, fracture mechanics and finite element analysis (FEA)., • Ensuring compliance with relevant legislation and standards, including the Pressure Systems Safety Regulations 2000 (PSSR)., • Supporting and delivering power plant inspections, including steam and water pressure parts, boiler tube surveys and structural/support assessments., • Evaluating materials performance, degradation mechanisms and remaining life to inform asset management decisions., • Providing mechanical engineering expertise to support plant operations, maintenance and long-term reliability., • Developing and implementing risk-based inspection (RBI) strategies., • Reviewing inspection findings and making informed run / repair / replace recommendations., • Producing clear, high-quality technical reports and project deliverables within agreed timescales and budgets., • Preparing technical proposals, tender submissions and supporting business development activities., • Providing technical guidance and mentoring to junior engineers., • Maintaining up-to-date knowledge of industry standards, legislation and best practice. Professional qualifications We are looking for someone with the following: • At minimum a degree in mechanical engineering or similar, • Ideally qualified with a masters, • Chartered Engineer or working towards professional registration is desirable Personal skills The Principal Integrity Engineer role would suit someone who has: • Extensive Power Generation experience is a must, ideally at minimum 10 years, • Familiar with Pressure Systems Safety Regulations 2000 and other relevant legislation, • Experience with Integrity assessment of defective power plant components - low and high temperature (e.g. reverse code calculation, fracture mechanics, finite element analysis)., • Strong organisational and project management skills Salary and benefits of the Principal Integrity Engineer role • Competitive Salary, • Flexible and hybrid working., • Ad-hoc travel across UK & Europe, • Profit share., • Company pension contributions., • Private medical insurance., • Health and wellbeing - digital GP, access to wellbeing app and support., • Enhanced maternity and paternity leave., • Sustainable benefits such as salary sacrifice electric vehicles and cycle to work schemes. INDPOW #LI-DG1 Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. xrnqpay We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.

Job Description Have you got the right qualifications and skills for this job Find out below, and hit apply to be considered. Electrical Systems Engineer (C&I) Derby, Raynesway Rolls-Royce Submarines Full-time | Permanent We're seeking a skilled Electrical Systems Engineer (C&I) to help us deliver high-integrity control systems that meet exacting performance and safety standards. You will work as an electrical systems engineer within our product development team, working with stakeholders to understand high level system requirements and refining these requirements to ensure they are of the correct level of maturity and detail for hardware, software and electronic product design. You will work closely with our product owners and development teams who use agile Scrum methods to develop high integrity software and FPGA based applications adopting the latest state-of-the-art toolsets. Training will be provided where required to equip you with the skills necessary to develop the requirements and system architecture essential for the protection and monitoring of a nuclear propulsion plant. Key Accountabilities: Specify product level requirements and work with our design teams and vendors to ensure these have been met Work as a control systems engineer within our product development team, working with stakeholders to understand high level system requirements and refining these requirements to ensure they are of the correct level of maturity and detail for hardware, software and electronic product design Work closely with our product owners and development teams who use agile Scrum methods to develop high integrity software and FPGA based applications adopting the latest state-of-the-art toolsets Manage the system requirements, including traceability, through the product maturity gates. Verify the final product design against the system design requirements Engage across the wider Rolls-Royce organisation to introduce learning and maintain a strong systems engineering capability. Contribute to the continuing improvement of the system development processes and product quality attending regular audits. Understand controls engineering technologies and be responsible for apportioning requirements to these. Work closely with Product Owners to specify product definitions against higher level system requirements. What we're looking for: Degree Qualified or equivalent in Electronics Engineering Discipline Strong background in Systems Engineering Proficiency in R equirements Capture and management (DOORS) Practical Experience with PLC Development and PFGA Technology Proven experience working in or with Agile/Scrum delivery models Awareness of safety-critical development constraints and relevant safety standards ( (e.g. DO-178B/C, IEC60880, IEC61508) What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. xrnqpay Job Category Electrical and Electronics Posting Date 16 Dec 2025; 00:12 Posting End Date PandoLogic. Keywords: Control Systems Engineer, Location: Derby, ENG - DE23 8NX

Job Description Like the look of this opportunity Make sure to apply fast, as a high volume of applications is expected Scroll down to read the complete job description. Structural Integrity Engineer (FEA) - Submarines Full Time / Part Time 5 Days On-Site Derby As a structural integrity engineer, you will be engaging primarily in structural integrity assessments including primary strength, fatigue, fatigue crack growth and fracture assessments, in accordance with ASME III and R6 defect tolerance assessment code. You will be supporting a wide range of programmes from in-service support, new build, and future programmes. You will also be building and maintaining Finite Element Analyses (FEA) models to extract stresses to be used in the justification of the components. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing : You will be undertaking a broad range of mechanical assessments, including linear, non-linear finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes (mainly Abaqus) and bespoke analysis codes. Using assessment work to develop and substantiate component designs, inform through-life management and supporting submarine enterprise. Development and implementation of methodologies to assess submarine nuclear plant components. Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we are looking for : At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics. Able to prioritise tasks and work effectively on multiple projects at the same time. Demonstrate interest and expertise in structural integrity analysis. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them. Practical experience of using finite element methods (preferably Abaqus) for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors. Good working knowledge of linear and non-linear events. Experience generating and working with finite element models, using industry standard tools such as Abaqus, ANSYS, HyperMesh. Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. (ASME III, R6) Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. xrnqpay Job Category Mechanical Systems Posting Date 21 Jan 2026; 00:01 Posting End Date PandoLogic. Keywords: Marine Engineer, Location: Derby, ENG - DE23 8NX

Job Description Job Description FPGA Engineer Full Time Derby or Glasgow You will work within our safety critical FPGA development team across all phases of the design lifecycle from requirements elicitation through to equipment testing. The team uses agile SCRUM methods to develop high integrity FPGA based applications adopting the latest state-of-the-art toolsets. Training will be provided where required to equip you with the skills necessary to develop requirements, architectures, designs, HDL code, associated tests and supporting infrastructure for applications essential for the protection and monitoring of a nuclear propulsion plant. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing You will follow a safety critical development lifecycle to: Develop requirements, from equipment to implementation level, for FPGA based designs Develop and Verify VHDL code Support hardware-based testing of your designs Author and review design documentation You will liaise with Software, Hardware, Systems and Verification teams to ensure customer expectations are met effectively and efficiently You will contribute to the continuing improvement of the development processes and product quality Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Be qualified to Degree level (or equivalent experience) in Electronics Engineering, Computer Science, or related discipline Be experienced in designing and verifying designs expressed using VHDL Have the ability to provide clear, concise and accurate technical reports Experience of the following, whilst not essential, would be beneficial: Languages: SystemVerilog TCL Python Tools: Siemens - QuestaSim / ModelSim Siemens - Questa PropCheck Siemens - FormalPro Synopsys - Synplify Pro IBM Have you got the right qualifications and skills for this job Find out below, and hit apply to be considered. Engineering Requirements DOORS Azure DevOps Git Standards, Frameworks and Techniques Knowledge and experience of safety standards such as IEC 61513, IEC 62566, IEC 26262, DO-254 UVM Constrained Random Testing Formal Verification We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. xrnqpay Job Category Electrical and Electronics Posting Date 22 Jan 2026; 00:01 Posting End Date PandoLogic. Keywords: FPGA Engineer, Location: Derby, ENG - DE23 8NX

Senior Mechanical Engineer Certain Advantage is hiring for a Senior Mechanical Engineer based in the Derby area. This role is on a permanent basis and is site-based. The Company We’re working with an engineering company specialising in managing complex infrastructure projects, with a strong focus on nuclear energy, renewable energy, and digital transformation solutions. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a Senior Mechanical Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Leading the development of a fluid system Process Flow Diagrams, Piping and Instrumentation Diagrams, Layout Drawings, Component Sizing Calculations, Component and Equipment Datasheets and Specifications, and other concept or detailed design-related documents Systems Engineering, Integration of system design into the wider power plant Act as technical support and point of contact for interfaces and stakeholders The Individual We’re looking for people who can show: Nuclear sector background or other highly regulated industries such as thermal power generation, oil and gas and process sectors. Fluid system design development. FEED through to detailed design and EPC delivery. Development of procurement specifications and working with equipment suppliers. Appreciation and application of ASME, European and UK codes and standards. Systems Engineering Educational background to a Bachelor’s degree or Higher National Diploma in an engineering discipline & CEng in a relevant discipline or working towards Professional Registration. Eligibility for a high level of security clearanceThe Benefits: Competitive salary package Training and Development Career progressionDoes this sound like your next career move? Apply today. Working with Certain Advantage We go the extra mile to find the best people for the job. If you’re hunting for a role where you can make an impact and grow your career, we’ll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn’t for you, head to (url removed) and register for job alerts and career guidance tips

Lead Technician Location: Etches Park Depot, Deadmans Road, Derby 12+ Month Initial Contract Pay: £26.92 /hour PAYE £35.98 /hour Umbrella Hours: 4 on 4 off shift pattern. 10 Hour shifts. Combination of Days & Nights (E.g. - 4 days, 4 off, 4 nights) • Opportunity for overtime, Paid at 1.25% This role falls inside IR35 - payment via PAYE or Umbrella Company Function of Role To service, complex fault find and repair Hitachi rolling stock assets Key Responsibilities Maintain the condition of the work site, materials and equipment Adhere to health, safety, environmental & quality practices in the workplace Prepare for and undertake planned and unplanned maintenance activities Confirm that traction and rolling stock assets comply with operational specifications by the use of engineering processes and techniques Read and extract information from traction and rolling stock drawings and specifications Prepare for and undertake the removal and replacement of traction and rolling stock components Modify or manufacture traction and rolling stock components by material removal using hand tools Assemble traction and rolling stock components using engineering processes and techniques Install new traction and rolling stock components using engineering processes and techniques Identify, assess and rectify defects and discrepancies on Hitachi rolling stock assets Identify repeat defects on Hitachi rolling stock assets and suggest / carry out repairs Create technical scopes of work for fault rectification by other members of staff Support reliability technicians with regards reliability improvements to rolling stock assets Attend and provide technical support with failures in service when on duty Provide operational support to users of Hitachi rolling stock assets Keep SAP record system up to date with clear and concise information of work carried out. Develop professionally and support good working relationships Learn new skills in accordance with Hitachi's new business demands as required Liaison with Hitachi and external personnel as required to complete the duties of the post Other responsibilities relevant to the role based on localised requirements Essential Licences / Competences Network Rail Sentinel PTS Time Served Rolling Stock Experience with mechanical, electrical disciplines. Engineering based NVQ level 3 HNC Engineering (Desirable) Experience of working a 24/7 shift roster in a modern rolling stock maintenance depot environment. Outstanding Safety Awareness gained in an operational railway engineering environment. Experience of working at stabling outstations or main line station technical support. Modern fault finding and repair techniques using pc-based laptops and remote train diagnostics. Extensive experience of modern maintenance management systems (MMS) and associated reliability and available trend analysis. Experience of performing modifications and campaigns on modern rolling stock. Behavioural Can comfortably work within a team or on their own Sound knowledge of, and compliance to, rules and regulations (internal and external) Able to always represent Hitachi in a professional manner Calm and diplomatic under pressure. Ability to investigate complex electrical and mechanical faults and write detailed reports. Excellent written and verbal communication skills Able to interface effectively with all levels of personnel both within and outside the company. Loyal, committed, confident and determined. Desirable Licences / Competences Manual Handling COSHH Working at height Powered plant, and tools. Intermediate IT skills - typically Word, Excel, Power Point, Outlook Reading electrical, pneumatic, mechanical schematics and drawings reading Powered plant and tools - bogie drop, cranes, air systems / 110v tools. Depot Protection AC/DC Depot isolationRequirements Live within commuting distance (1 hour) of Etches Park Depot Right to work in the UK and able to provide proof of qualificationsCompliance This is a safety-critical role. Candidates must pass a drug & alcohol test and comply with strict Health & Safety controls. For more information, a full Job Description and also for immediate consideration, please apply by sending your CV to Jake Parker at Rullion: This contract is being advertised by Rullion Ltd. Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Senior Metallurgist Materials Scientist Background Risktec Solutions is an established, independent and specialist risk management consulting and training company, and is part of the TV Rheinland Group. We assist clients in major hazard industries including oil and gas, clean energy, nuclear and transportation, as well as commercial and public sectors, to manage health, safety, security, environmental and business risk. Our people are high calibre professionals, with a strong focus on meeting clients expectations. We are seeking an experienced Metallurgist (permanent role) to take up a senior position in its expanding Asset Integrity Management team based in Derby, UK. The successful candidate will play a key role in leading and delivering solutions for our clients. Most of the teams activities are focussed on the Conventional Power and Clean Energy sectors ( primarily CCGT, Biomass and Energy from Waste plants ). Duties and responsibilities will include : Leading and delivering metallurgical failure examinations (includes laboratory work and formal reporting). This may include site visits to carry out investigations and inspections. Scheduling and prioritisation of failures arriving at TUV Rheinland UK. Mentoring and development of less experienced failure investigators. Producing formal technical reports and other project deliverables on time and to budget. Creating proposals and tender return documents and developing new business. Developing relationships with clients. Managing larger, project-based investigations. Maintaining up-to-date knowledge of standards, legislation and good practice. The role may periodically involve short periods of travel, both within the UK and abroad, to meet project requirements. Experience The candidate must have experience in the following: Ferrous metallurgy, failure analysis and root cause investigation experience in high temperature degradation mechanisms, including creep, and corrosion in biomass / energy from waste boilers would be a particular advantage. Worked within a power plant background. Alternatively, experience of damage / degradation mechanisms and life assessment associated with the oil & gas, petro-chem industries may be considered suitable. In addition, you must have excellent, communication and report writing skills. Requirements: Minimum of a degree in metallurgy, materials science, materials engineering or related discipline Minimum of 5 years industrial failure analysis experience related to the power industry (although other large industrial sectors such as petro-chem and oil & gas may be considered depending on experience). Rewards: A competitive package of salary and benefits is offered for permanent staff this includes the following. Profit Share Pension (7.5% company contribution) Life Assurance Permanent Health Insurance Private Medical Insurance Employee Assistance Programme Flexible Leave Flexible Working Employee Discounts Salary Sacrifice Options Professional and Postgraduate Training Professional Subscriptions Skills Training TPBN1_UKTJ

Integrity / Plant Engineer (Pressure Systems) Conventional Power and Clean Energy Industries (Biomass and Energy from Waste). About Us Risktec Solutions Ltd is an established, independent engineering and risk management consultancy. We help clients to manage health, safety, security, environmental (HSSE) and business risk in sectors where the impact of loss is high. Our people are high calibre and motivated professionals, with a clear focus on meeting clients’ expectations. We are seeking Integrity / Plant Engineers (permanent role) with specific pressure systems knowledge to take up a position in its expanding Asset Integrity Management team based in our brand new facility in Derby, UK. The successful candidates will play a key role in leading and delivering solutions for our clients. The majority of the team’s activities are focussed on the Conventional Power and Clean Energy sectors (primarily CCGT, Biomass and Energy from Waste plants). Requirements: The candidates must have some experience in all, or most, of the following: Integrity assessment of defective power plant components – low and high temperature (e.g. reverse code calculation, fracture mechanics, finite element analysis). Legislative compliance e.g. the UK PSSR. Power plant inspection (e.g. steam and water pressure parts, boiler tube surveys, support surveys), with an understanding of materials selection, damage/degradation mechanisms and life assessment. Power plant mechanical engineering. Power plant operations and maintenance.In addition, you will have excellent organisational, problem solving, communication and report writing skills. Responsibilities: Delivering power plant integrity assessments. Assisting in developing risk-based inspection strategies. Providing technical support and advice to clients. Assessing inspection results, i.e. making run / repair / replace decisions. Producing formal technical reports and other project deliverables on time and to budget. Creating proposals and tender return documents and developing new business Maintaining up-to-date knowledge of standards, legislation and good practice.The role will involve site visits, both within the UK and occasionally abroad, to meet project requirements. Qualifications and experience: BEng Degree or equivalent in engineering related topic, preferably mechanical engineering. Incorporated Engineer or working towards professional registration is desirable. Minimum of 3 – 5 years of relevant experience. Rewards: A competitive package of salary and benefits is offered for permanent staff, including bonus, private medical insurance, and contributions into a pension scheme. Flexible home-working arrangements, but with minimum of three days in the office / week

AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies. Our Contingent Workforce Solution (CWS) is one way we support our clients. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed. On behalf of our globally respected client who develop cutting-edge technologies that deliver clean, safe and competitive solutions to meet the planet's vital power needs we are looking for a Maintenance Electrician for a 12 months contract based in Derby. Please note this role is going to on a 4 on, 4 off rotating shift pattern. Job description - the role Purpose of the role: In this role you will provide support to the Manufacturing Services Leader and Manufacturing Services Engineer. You will be responsible for performing Electrical installations, repairs and maintenance on production manufacturing assets and all associated production equipment. What you'll do: Perform a range of routine, reactive, troubleshooting and preventive maintenance tasks across a broad range of manufacturing assets and production & experimental equipment across a plant, site or business, ensuring that all outputs are safe, available and capable for use when required. Utilise hand tools and test equipment to deliver customer requirements. Use drawings & data to inform and implement the most effective approach towards capable electrical systems. Collect, organise, and analyse data in support of Key Performance Indicators for the Manufacturing Services Department as required. Read and interpret machinery and plant drawings, electrical schematics, maintenance manuals, and parts catalogues to enable customer requirements to be met. Coordinate workload and electrical activities with customers, regularly communicating and interfacing with Production Leaders, Team Leaders, Design Engineers, Maintenance Team members and Production Operators. Coordinate their activities with Production Staff, regularly communicating and interfacing with Production Leaders, Team Leaders, and Production Operators. Work with site Manufacturing Engineers to help understand and restore equipment performance to standard. Work alongside/support equipment OEM and Design engineers Consistently support asset maintenance activities in order to ensure that equipment and facilities are safe and reliable to a high performance standard. Support the effective induction of new team members and support cross-training of other team members. Utilise problem solving skills and ability to make sound recommendations based on judgement, training and previous experience. Able to process Work Orders and pull reports from the Computerised Maintenance Management System. Safely operate site specific equipment as required with appropriate training.The skills you'll need: NVQ level 3 or equivalent in relevant Electrotechnical time served apprenticeship. Current BS7671 Certificate (currently 18th Edition)- Preferred Good understanding of Electrical Installations and maintenance operations. Basic IT literacy. Understanding of local and regional HSE Standards and regulations. Able to work to engineering drawings.Ideal Exp / Skills: Will ideally come from a specific mechatronic maintenance experience. Next steps We will only accept workers operating via an Umbrella or PAYE engagement model. If you are interested in applying for this position and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course. AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business

Are you a seasoned power generation expert ready to move beyond operations and into high-impact, strategic risk advisory? Do you thrive on tackling complex technical challenges and influencing major underwriting decisions across global energy assets? If you bring deep conventional power expertise an

A leading Waste Management company in Cheshire is looking for a Mechanical Maintenance Engineer to enhance plant reliability through effective maintenance. The ideal candidate should have relevant qualifications in Mechanical Engineering and experience in industrial plant maintenance.

A leading recruitment agency is seeking an experienced Shift Team Leader for a biomass power plant in Sittingbourne, Kent.

A global engineering consultancy in the United Kingdom seeks a Field Inspection Engineer to provide quality oversight during projects in the Energy sector.Successful candidates should have mechanical engineering experience and familiarity with Quality Control and Assurance processes.The role involve

The role involves ensuring safe operation of the plant, monitoring emissions, and conducting maintenance tasks.

A skilled engineering recruitment firm is seeking a Mechanical Fitter for a shutdown project at a power station in Ratcliffe on Soar.

This role involves providing technical support and overseeing engineering projects at the CCGT Power Station.

A leading engineering firm in London is seeking experienced Platers for a long-term project involving new power generation facilities.

As a Sales Engineer – Power Plant Solutions, you will combine technical expertise with project management responsibility, coordinating engineered solutions and on-site services for power plants, refineries, oil & gas facilities, and chemical plants. Strong technical knowledge of power generation s

A leading engineering firm is seeking skilled Coded TIG Pipe Welders for a new build power generation project in London.

A leading energy company in Saudi Arabia is seeking an Electrical Engineer for its Downstream Power Systems Planning Department.

Candidates should have NVQ Level 3 qualifications and industrial experience, particularly in power generation. An engineering resource firm is seeking experienced Pipefitters for a major power generation project in London.

A leading international technical service provider seeks Integrity / Plant Engineers for their Asset Integrity Management team in Derby, UK. This permanent role requires expertise in pressure systems and focuses on the Conventional Power and Clean Energy sectors.

A renowned recruitment agency is seeking Mechanical Fitters for a shutdown at a power station in Snetterton, Norfolk.

A leading energy solutions provider is seeking a Senior BIM Engineer for a hybrid role based in Derby, Manchester, or Warrington.This position focuses on driving BIM coordination and implementing standards across disciplines, ensuring the delivery of a high-quality information management framework.C

A recruitment agency seeks a Controls and Instrumentation Technician for an Energy from Waste Power Station near Bicester.

As a Sales Engineer specializing in Power Plant Solutions, you will serve as both a technical expert and a project manager, coordinating solutions and on-site services to power plants, refineries, oil and gas facilities, and chemical plants. UK Sales Engineer - Power Plant Solutions. UK Sales Engine

An Energy Recruitment Agency in the UK is seeking an experienced Warranty Engineer for a 2-year Fixed Term Contract to oversee the handover and warranty phase of a major Energy from Waste Power Station.

A leading recruitment agency is seeking an Operations Asset Manager for Power Plants in the UK. Candidates should have a degree in Engineering and over 10 years of experience in the power industry, particularly with steam and gas turbines.

A leading recruitment agency in the UK seeks a Cost Controller for a fixed term contract of 12 months to oversee and manage costs across two power plants in construction.

Are you a seasoned power generation expert ready to move beyond operations and into high-impact, strategic risk advisory? Do you thrive on tackling complex technical challenges and influencing major underwriting decisions across global energy assets? If you bring deep conventional power expertise an

A leading O&M provider seeks an Engineering and Maintenance Manager for its power plant in Seascale, Cumbria.

With more than 5,000 employees, ScotRail plays a vital role in serving the people and communities of Scotland.We recognise a modern and diverse workforce, encouraged to use their talents, and develop their skills, is integral to our success in serving and reflecting the communities of Scotland.We ar

The VTS Operator provides information and instructions to vessels appropriate to the level of service provided by the VTS and decides on the actions to be taken in response to data received on marine traffic.Reporting to the Harbour Master, the post requires a current and valid IALA C0103-1 certific

My client who is based in Aldridge is looking for experience overhead crate operator.The role is temporary with a view to permanent for the right candidate.Duties of an Overhead Crane Operator.Assist in loading and unloading materials.FLT licence would be advantageous.

My client was established in the 1930s and is a world leader in delivering quality electrical solutions for military applications and its equipment and systems that can be found in a broad range of applications across the globe.As the Mechanical Design Engineer, you are responsible for the creation

Maintenance Shift Engineer Panama Shift - 8 hour shifts / Earlies, Days + Lates Salary: £54,000 Location: Greenford A dynamic leader in automation and engineering systems integration is on the lookout for a Maintenance Engineer to become a valuable part of their ever-expanding team.Our c

Electronic Manufacturing Engineer (SMT Machines).Training + Progression + Company Benefits.Are you a Manufacturing Engineer, Production Engineer or similar with a background using SMT machines, looking to broaden your technical expertise in production and programming?.Do you want to work with advanc

Maintenance Engineer £47,000 + Company Vehicle + Pension + Training and Development Monday-Friday Days Norfolk (regional travel required) If you're a Maintenance Engineer who enjoys hands-on fault-finding, electrical maintenance, and working across multiple sites, this engineering p

They have an exceptional reputation with the industry and operate out of a fully automated state of the art plant. What’s In it for you as a maintenance engineer? Work in an automated plant - recession proof staff shop Canteen with subsidised food Sick pay Good pension -