Process safety engineer jobs in LutonCreate job alerts

Site Services Engineer Location: LutonJob Type: Permanent, Full-Time About the Role We are working with a well-established engineering services provider with a strong UK presence and a blue-chip customer base across multiple industrial sectors. The business specialises in optimising asset performance, including motors, gearboxes, pumps, machining, induction, condition monitoring, and fabrication services. As a Site Services Engineer, you will play a key role in the removal, installation, dismantling, rebuild, and refurbishment of plant and equipment within the Water and Industrial sectors. This includes working on pumps, gearboxes, motors, generators, and similar rotating equipment. You will also be responsible for completing all onsite inspection and assembly documentation while ensuring compliance with company procedures, policies, and work instructions. Key Responsibilities • Follow all company, site, and client health & safety procedures, promoting a strong safety culture at all times, • Maintain a clean, organised, and controlled working environment, • Work in line with agreed Method Statements and Work Instructions, • Carry out root cause analysis and fault finding on electro-mechanical equipment, • Produce detailed reports outlining findings, causes, and recommended corrective actions, • Perform on-site maintenance, repairs, and refurbishment where required, • Dismantle and remove rotating and mechanical equipment for repair, • Rebuild, repair, test, and commission equipment both in workshop and onsite, • Reinstall equipment and carry out field testing and commissioning, • Conduct planned service and maintenance visits, • Respond to breakdowns as required, • Support workshop-based activities when needed Key Skills & Qualifications Essential • Mechanical apprenticeship (time-served) with ONC, HNC, NVQ or equivalent, • Minimum of 3 years’ experience in a similar field-based role, • Flexible approach to working hours, • Basic understanding of health & safety practices in industrial environments, • Full UK driving licence Desirable • Experience within the water industry or process plants, • Knowledge of heavy industries (e.g. steel, paper, power), • Confined space certification, • ATEX experience, • Overhead crane or lifting equipment licences, • Forklift (counterbalance) licence, • Lifting & slinging qualification, • Water hygiene certification, • Relevant site safety passports (e.g. CSCS, CCNSG, Thames Water Passport), • Multi-skilled (electro-mechanical) capability Technical Competencies • Strong understanding of engineering principles, • Ability to interpret technical drawings and parts lists, • Solid mechanical repair and fault-finding skills, • High level of accuracy and attention to detail, • Effective communication skills (written and verbal), • Ability to liaise with subcontractors and coordinate site services (e.g. cranes, scaffolding), • Strong organisational skills and ability to meet deadlines, • Capable of working independently or as part of a team, • Willingness to undertake further training and development

Work with Process Safety professionals within the wider AECOM business to develop collaboration opportunities and enhance quality of service in this area for our clients;. Considerable technical experience in power generation, industrial process, CCUS and/or future fuels projects, preferably within

Your Future Starts Here – Join the Clymac Talent Network Are you looking for your next opportunity in a company that values safety, innovation, and career growth? At Clymac, we’re always on the lookout for passionate, skilled, and driven individuals who want to make a real impact. Whether you're an experienced engineer, a customer service superstar, a project manager, or just starting out in the fire and security industry—we want to connect with you. Why Join Our Talent Network? • Priority Access – Hear about roles before they go live, • Tailored Matches – We’ll reach out when a role aligns with your skills and ambitions, • Career Growth – Be part of a company that invests in your development, • Explore Opportunities – From engineering and operations to customer service and support, we offer a wide range of career paths, • Real Impact – Work with a team that makes a difference every day, • No Commitment – Registering your interest doesn’t tie you to anything – it simply keeps you in the loop Who We’re Looking For • We welcome applications from individuals across all backgrounds and experience levels. Whether you're an engineer, a customer service specialist, a project manager, or someone with a passion for fire and security services, we want to connect with you. How to Join • Click to submit your details and tell us a bit about your experience and career goals. Our Talent Acquisition team will be in touch when suitable opportunities arise. Our Commitment to Attracting, Rewarding & Retaining Talent At Clymac, we understand the pivotal role that fair compensation plays in the success of our team. That’s why we’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Salary, • Pension Plan – Helping you invest in a secure financial future, • Life Assurance – Peace of mind with coverage at 4x your annual salary, • Generous Holiday Allowance – Paid leave plus all bank holidays, giving you time to recharge, • Referral Bonus Scheme – Earn up to £1,000 for every successful candidate you refer – with no limits, • Mental Health & Wellbeing Support – Access to confidential resources and support when you need it most, • Employee Recognition Programme – Celebrating your hard work and achievements throughout the year, • Career Development – Ongoing training, clear progression paths, and opportunities to grow within the business A Little More About Clymac At our core, we are a small, regionally focused business that prides itself on delivering a bespoke and reactive service. Our clients receive undivided attention and dedication, ensuring their needs are met with precision and care. Yet, we have the luxury of being part of a larger group of businesses within the Fire Protection, Security, and Building Management Systems industry. This connection allows us to share best practices, access learning and development academies, and benefit from Human Resource specialists and industry knowledge. This synergy ensures we are constantly improving and staying ahead in the critical service industry. Our Commitment: We are large enough to provide comprehensive, industry-leading solutions, yet small enough to deliver a personal and caring service to each client. Equal Opportunities At Clymac, we cultivate a vibrant, diverse, and inclusive environment where everyone can truly be themselves. We celebrate individuality and believe that a culture of inclusion helps us better serve our customers and innovate as a team. Our commitment to equal opportunities means we're here to support you—if you need any adjustments to fully participate in the recruitment process, just let us know. Together, we can create a workplace where everyone thrives Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Product Manager (Biometrics) About iProov iProov provides science-based biometric solutions that enable the world’s most security-conscious organizations to streamline secure remote onboarding and authentication for digital and physical access. Our award-winning liveness technology and iSOC offer unmatched resilience against deepfakes and generative AI threats while ensuring effortless, scalable user experiences. Trusted by leading governments and enterprises, including the U.S. Department of Homeland Security, U.K. Home Office, GovTech Singapore, ING, and UBS, iProov sets the standard in biometric identity assurance. This global trust is built not only on our technology but on the strength of the people behind it. For us, diversity at iProov is about reflecting the customers we serve, holding the principles of equality and inclusion at the heart of everything we do and all that we stand for, embracing differences, creating possibilities, and growing together. We aim to foster a culture where individuals of all backgrounds feel confident in bringing their whole selves to work, feel included, and their talents are nurtured, empowering them to contribute fully to our purpose. The Role Reports to: Head of Product (Biometrics) Location: (WeWork Waterloo) London, UK - Hybrid (1-2 times per week in office) Comp: Negotiable (Base) + Company Performance Bonus (10%) + Share Options (EMI) + iProov Benefits IProov is looking for a Product Manager to join our growing Product & Innovation team to work on our core Biometric product. In a team of Product Managers working on our Biometric Product, you will work closely with our Engineer and Machine Learning functions owning the Product Experience. You will play an integral part in streamlining our efforts understanding customer pain points and turning them into usable, lovable solutions. This is a role that involves a large amount of autonomy and ambiguity. In a typical week, you can expect to work closely with our customers to draw requirements from both a technical and security perspective, whiteboard R&D options with various teams of Software and Machine Learning Engineers, productionize and commercialize new features where you see fit, and champion the next generation of usable and inclusive biometric products. • Experience in Product Management in a B2B environment, • Experience in User-centric Design, Mobile Applications, and Machine Learning disciplines are assets, • Experience in identifying and implementing data-backed changes, • Experience in conducting customer/user interviews, • Ability to effectively communicate with various stakeholders, • Exposure to operating within a scale up environment, • A drive to make an impact, • 25 days Annual Leave, plus 8 Bank Holidays (more holiday with service - up to an extra 5 days off per year based on your continuous service), • Growth Shares allocated after passing probation (6 months of service), • Salary sacrifice schemes including: Pension, Cycle To Work and Electric Car Scheme, • Nursery Sacrifice Scheme, • Work Overseas Perk - Work globally for up to 2 weeks, • Life Assurance, • SmartHealth - Access to private GP, Psychologist, Nutritionist along with tailored fitness plans for both you and your family, • Benefit from personalized 1:1 career coaching with our in-house Occupational Psychologist, • Award winning L&D platform with personal allocated training budgets, • Enhanced paid family leave, • Pension - 5% employee, 3% employer, • Flexible hybrid working environment, • Free Barista Coffee/Tea, biscuits with fruit in the WeWork office, • Free access to WeWork discounts and free online well-being sessions, • Vitality Health - a range of options available on this below The Vitality Programme includes a number of reward benefits that all employees have access to as part of the plan, for example: • Private Health cover including Dental, Optical, and Audiology, • 50% off monthly gym memberships, • Apple watches significantly discounted based member vitality status, • Half price trainers with Runners Need, • Weekly rewards – Free coffee with Café Nero, • Monthly rewards – Free Cinema ticket, • Discounts on travel with Expedia (hotels) and Mr & Mrs Smith with discounts getting greater throughout the year based on a members vitality status, • Amazon prime free months based on activity, • Up to 25% cashback at Waitrose when buying healthy foods, • 75% off stays at Champneys Health Spas, • Allen Carr’s £299 no smoking programme for free, • Access to Vitality Healthy Mind with 30% off Headspace subscriptions and the ability to earn Vitality points for using Buddhify, Calm and Headspace, • Discounts on Weight Watchers, • 50%-80% off Comprehensive Private Health screenings Our Culture & Recruitment Process At iProov, we're incredibly proud of the culture we've carefully curated. Our culture enables diverse thought, curiosity and innovation. Our team strives to do everything to the highest standard possible to achieve the remarkable. To do that we need different perspectives, experiences and ideas alongside an environment where these are welcomed - we want everyone to feel confident in bringing their full capabilities to work. We firmly believe psychological safety is key to building and nurturing great teams. We’re a small and dynamic company, that means having the right skills is important, and we know that our best work emerges when people feel secure, welcomed and respected. As an equal opportunities employer, we encourage applications from people of all backgrounds. We’re committed to building a workforce that is representative of the people we serve. We will not put someone at a disadvantage or treat them less favourably because of race, color, national origin, ancestry, age, disability, creed, religion or belief, sex, sexual orientation, gender reassignment, marriage or civil partnership, or pregnancy and maternity. Our goal is to find people who are passionate about creating a safer, more secure world. Our recruitment process is designed to be fair and transparent, focusing solely on your qualifications, competence, and suitability for the role. We review all applications carefully and will be in touch with shortlisted candidates regarding the next steps in our interview process. If you need an adjustment for a disability or any other reason during the hiring process, please send a request to _

Your Future Starts Here – Join the Morgan Fire Protection Talent Network Are you looking for your next opportunity in a company that values safety, innovation, and career growth? At Morgan Fire Protection, we’re always on the lookout for passionate, skilled, and driven individuals who want to make a real impact. Whether you're an experienced engineer, a customer service superstar, a project manager, or just starting out in the fire and security industry—we want to connect with you. Why Join Our Talent Network? • Priority Access – Hear about roles before they go live, • Tailored Matches – We’ll reach out when a role aligns with your skills and ambitions, • Career Growth – Be part of a company that invests in your development, • Explore Opportunities – From engineering and operations to customer service and support, we offer a wide range of career paths, • Real Impact – Work with a team that makes a difference every day, • No Commitment – Registering your interest doesn’t tie you to anything – it simply keeps you in the loop Who We’re Looking For • We welcome applications from individuals across all backgrounds and experience levels. Whether you're an engineer, a customer service specialist, a project manager, or someone with a passion for fire and security services, we want to connect with you. How to Join • Click to submit your details and tell us a bit about your experience and career goals. Our Talent Acquisition team will be in touch when suitable opportunities arise. How we Attract, Reward & Retain Our Employees At Morgan Fire Protection we recognise the importance of fairly rewarding our employees. We go above and beyond with our remuneration packages that not only meet the needs of a challenging economic climate, but we offer packages, benefits and incentives to support the broader needs of our people making their everyday lives and futures more comfortable. • Competitive Salary, • Bonus Scheme (role specific), • Company Vehicle & Fuel card (role specific), • Royal London Pension, • Life Assurance 4x Salary, • Paid Holidays plus Bank Holidays, • Paid Candidate Referral Scheme – up to £1,000 per referral, unlimited referrals., • Mental Health & Well-being Scheme, • Employee Recognition Scheme, • Development and progression opportunities Equal Opportunities We strive to create a diverse, inclusive environment to encourage all our employees to be themselves. We celebrate what makes us unique and believe that adopting a culture of inclusion helps us to best serve our customers. We are committed to supporting equal opportunities, please inform us if you require any reasonable adjustments to enable you to participate in the recruitment process. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions. We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. The Principal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support. The Principal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions. This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements. Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation. Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods. Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts. Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements. Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences. Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations. Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction. Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning. You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Degree in Aerospace, Mechanical or similar Experience in Aerospace design / or Aerospace product development. Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements. Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches. Familiarity with digital engineering and model based design preferably using CATIA V5. Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders. Desirable: Expert user of CATIA V5 for complex modelling and drawing creation Chartered Engineer status (CEng) Experience working with defence customers and regulatory authorities. Experience in transparencies, composites, or specialist structures/ systems. This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams. You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a member of the Manufacturing Engineering Team, the Manufacturing Engineer will report to the Manufacturing Engineer Manager working across Civil and Defence business lines and based at our Luton site, occasional travel to visit equipment suppliers could be required. The Manufacturing Engineer will work across several value streams within GKN Luton and will be responsible for developing new and existing manufacturing processes whilst supporting the day-to-day operations team at Luton. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Design and implement high capability manufacturing processes using GKNs Zero-Defect Manufacturing (ZDM) tool suite, including the APQP Core Tools. Develop, document and optimise new and existing manufacturing processes such as creation/amendment of SOP (Standard Operating Procedure) and Process Specifications Create and update engineering documentation to maintain configuration control and help manage point of introduction activities, first article inspection and customer approvals. Provide day-to-day support to manufacturing operations. Provide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answered Be compliant with the Companys Environmental, Health & Safety and Energy procedures. Manage large and complex projects from programme or customer approval through introduction to production and delivery to customer Identify, anticipate and offer solutions to technical problems Establish & improve production process controls Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC/HND qualification (or equivalent experience) in an engineering discipline, preferably Mechanical, Electrical, Industrial engineering. Experience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process Capability Experience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniques Demonstrable experience of practical problem-solving techniques using A3 or 8D Knowledge of Configuration control processes High Level of technical writing and good communication skills Desirable: Experience of Lean Manufacturing including process standardisation kaizen activities such as 5S Manufacturing Engineering experience gained from the Aerospace Industry 6Sigma Qualification and experience Experience in composite lay-up processes Project Planning skills Automation experience using systems such as ABB CNC and CMM Knowledge We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in your approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. We are looking for a Senior Design Engineer to join our Transparencies team to support new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. This is more than a CAD role, as a Senior Design Engineer you will represent design in an integrated product team, and lead design activities/projects to support your product group including the creation and maintenance of product definition and ensuring ongoing product performance against requirements. Working across the product lifecycle you will be involved in: New product development activities including requirements management, geometric design, materials selection, tooling, manufacturing process development and assembly methods, specifications, product verification, qualification and certification testing. Product sustaining activities including MRB, Customer concession management, manufacturing problem solving, Engineering change management and in service technical support to our customers as a part of an Integrated Programme Team. Continuous improvement of products, processes, tools and design handbooks to ensure the highest standards of quality and compliance to evolving customer, regulatory, and airworthiness requirements. As a Senior Design Engineer within the Engineering and Technology Department you will also have the opportunity to contribute to high-impact research and development projects within your field of expertise. You will have a track record of delivering high quality technical work, and have project management skills. You will have good written and oral communication skills, and be confident working with a broad range of internal and external stakeholders, including non-technical colleagues. Core operational hours at our Luton site are Monday to Thursday, 07:3016:30, and Friday, 07:3012:30. Some flexibility may be available, subject to agreement with manager. There may also be an opportunity to work from home one day per week, depending on business needs. Occasional UK travel may be required to meet suppliers, customers, and visit other GKN Aerospace sites. Job Responsibilities Analyse customer requirements and define technical solutions as input to bids and proposals within assigned programmes/ projects. Develop, check and approve technical solutions and compliance documentation for work packages to ensure they are compliant with all relevant customer, regulatory, and airworthiness requirements, within agreed programme, schedule, and manufacturing constraints. Identify and assess technical risks and propose mitigations relevant to the work package within assigned programmes/projects. Act as Lead Design Engineer in Integrated Program Teams (IPT) and Material Review Board (MRB) Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements. Create, check and approve documents such as permits, concessions, rework schemes and provide technical support by implementing solutions to address non-conforming products, designs, and compliance documentation. Lead design activities for internal and external technical reviews including formal gate reviews by creation and preparation of technical data and presentations of product design. You will be responsible for raising and issuing high quality and detailed technical documentation. Mentor, train and develop junior members of the team by providing technical guidance and support. You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. You should have a good understanding of the product development lifecycle, design practices and an interest in manufacturing. This is a hands on role, and although product oriented the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You should be adaptable in approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As a Senior Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Profile description: To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Hold an accredited relevant Engineering qualification at Bachelor level or equivalent. Naturally curious, and show a strong interest in aviation and aerospace engineering technology. Strong self-starter, able to execute tasks according to plan. Logical and methodical approach to task planning and be able to demonstrate an evidence-based approach to decision making and problem solving. Good interpersonal and communication skills, Able to work independently and as part of a multi-disciplinary team to meet objectives. Possess good oral and written communication skills, able to create clear, concise and accurate technical content. Experience of creating models and drawings using CATIA V5. Please note: Some GKN Aerospace programmes are subject to regulatory restrictions which may impact certain Nationalities, as such part of the application process you are asked to declare. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

BAM UK&Ireland is looking for Blasting Engineers/Trainee Blasting Engineers to join our team, supporting the Quarrying and extractive operations across the United Kingdom (Scotland and England specifically). This will be a hands-on role carrying out Drill and Blast duties and working alongside our blasting teams to deliver safe, efficient results. Full training program would be issued for the Trainee position. The engineer will support day-to-day blasting operations across the Central Belt of Scotland or the East Midlands, including Cumbria, Lancashire, and Leicestershire. They will also be responsible for maintaining the highest safety standards and working with the Quarry Regulations 1999. This will also include designing blasts, keeping accurate records, attending production meetings, producing activity plans and risk assessments, and maintaining a personal career development plan. Making Possible You will be responsible for the following: • Blast design, Face profiling, initiation sequence design, charging of blasts, and post-blast specifications., • Keep accurate records, • Supervision of the drilling team, • Produce/Create activity plans and risk assessments What do you bring to the role? Necessary: • Level 5 Diploma in Shotfiring Supervision, • Level 5 Certificate in Blast Design, • Level 3 Diploma in Shotfiring, • Level 2 Certificate in Face Profiling, • Full UK Driving Licence, • Strong safety mindset, • Team player who can work on their own initiative and independently on site Desirable: • Geotechnical training, • Quarry Regulation awareness, • Mineral Sector Safety Passport, • Current MPQC Blasting Cards Whats in it for you? • Competitive salary, • A wide range of family-friendly policies, • Pension contributions, • Life assurance, • 23 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional development About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. JBRP1_UKTJ

Your impact Our Design Integrity function is currently recruiting for a Principal Configuration and Data Engineer to oversee an expanding portfolio of world class Mission Critical and Flight Safety Involved Systems deployed across Land, Sea and Air domains. You will be responsible for supporting and oversight of the internal Integrated Product Teams (IPTs) across the Customer Support and Service Solutions (CS3) Line of Business (LoB). In addition to this, you will be responsible for providing technical leadership for the configuration and data teams, as well as being responsible for defining, implementing and maintaining the Configuration Management process across the full lifecycle of aerospace, civil and defence programmes. Ensuring all product baselines are defined in accordance with contractual, regulatory and company standards throughout the product lifecycle. Please note this role is working on a hybrid basis and can be based near our following sites, Bristol, Edinburgh, Luton, Southampton, Newcastle, Basildon or Lincoln. • Ensuring the integrity and traceability of all configuration items (CIs) across hardware, software, and documentation used across the LoB., • Identification, agreement, and control of Configuration Items in alignment with programme and regulatory requirements., • Creation, maintenance and oversight of configuration management plans, including baselines, updates, and change implementation plans., • Ensuring compliance with the Five Pillars of Configuration Management and all relevant aerospace and defence standards., • Configuration Identification – defining, documenting, and controlling CIs, baselines (Functional, Allocated, Product, As-Built, As Maintained), and their relationships in PLM systems., • Configuration Control – managing changes via First Pass Filters (FPF), Configuration Control Boards (CCB), and Configuration Implementation Boards (CIB) to ensure structured, compliant change approval and embodiment., • Configuration Status Accounting (CSA) – capturing, maintaining, and reporting CI status, change records, and KPIs, providing actionable intelligence to the Line of Business., • Configuration Audits – planning and participating in Functional Configuration Audits (FCA), Physical Configuration Audits (PCA), and internal/supplier audits to verify conformity between design, production, and documentation., • Configuration Planning & Governance – create and maintain the Configuration Management Plan (CMP) helping to ensure CM governance aligns with programme and contractual obligations., • Lead the evaluation, classification, and management of Class I and Class II changes, ensuring appropriate review, approval, and traceability., • Participate actively in first-pass filter for all proposed changes, ensuring they meet standards before progressing to formal review., • Actively participate in Configuration Implementation Boards (CIB) and Change Control Boards (CCB), providing technical guidance and ensuring informed decisions., • Ensure the impact of proposed changes is thoroughly assessed across design, production, operations, supply chain and security., • Participate in internal audits of configuration and change control processes, ensuring findings are addressed and corrective actions implemented., • Act as the point of escalation for supplier‑related configuration issues and drive resolution., • Good working Knowledge of Teamcenter Unified would be desirable This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn. This role is subject to pre‑employment screening in line with the UK Governments Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance, please visit: https://careers.uk.leonardo.com/gb/en/security-and-vetting At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company‑funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we're here to help you thrive. • Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi‑days each year., • Secure your Future: Benefit from our award‑winning pension scheme with up to 15% employer contribution., • Your Wellbeing Matters: Free access to mental health support, financial advice, and employee‑led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity)., • Rewarding Performance: All employees at management level and below are eligible for our bonus scheme., • Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning., • Refer a friend: Receive a financial reward through our referral programme., • Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more., • Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company, benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo, we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment GB - Luton - Cap. Green 300 GB - Basildon, GB - Bristol Building, GB - Edinburgh, GB - Lincoln, GB - Newcastle, GB - Southampton Employee-Permanent Hybrid #J-18808-Ljbffr

Overview: Working closely with our client, a market leader in the supply of ancillary equipment to the plastics industry, we are looking for 2x Cooling Service Engineers to support business growth within their Cooling Division. Benefits: • Door to door overtime @1.5x and 2x, • Company vehicle with fuel card, • Laptop & mobile phone, • Company pension contribution of 5%, • 25 days holiday + bank hols with additional day hol for every 2 years service (up to max. 5 extra days), • Access to Smart Health App, • Free eye test every 2 years, • Enhance Maternity and Paternity pay, • Death in service cover 2x salary rising to 4x after 5 years service, • Income protection cover after 1 year service, • Access to free and confidential independent financial advisor Remit: • Fantastic opportunity for a skilled Cooling Engineer to join a market leading specialist in their field who place their people at the forefront of their business, • This position will suit a skilled Process Cooling Engineer with demonstrable experience of fault finding, repair and maintenance of process cooling systems, • The successful Cooling Service Engineer will play an important role in ensuring equipment reliability, efficiency and performance Role: • As Cooling Service Engineer you will carry out fault finding, repair, and maintenance of process cooling systems on customer sites, • In the role of Cooling Service Engineer you will be responsible for supporting installation and upgrade activities for cooling equipment and associated systems, • Provide technical support to customers on system operation and maintenance, • Work with suppliers to understand equipment requirements and support ongoing system performance, • Conduct system performance checks, diagnostics, and optimisation to improve efficiency and reliability, • Maintain accurate service records, reports, and documentation, • Ensure compliance with safety standards, industry regulations, and company procedures, • Support training and knowledge sharing within the engineering team, • Contribute to continuous improvement of service processes and system performance, • Stay up to date with industry developments, technologies, and best practices, • Undertake additional duties as required within the scope of the role Experience Requirements: • Proven experience as a Process Cooling Engineer, including fault finding, repair, and maintenance of process cooling systems, • Strong practical experience carrying out on-site diagnostics, servicing, and system optimisation, • Solid understanding of process cooling systems, including refrigeration principles, electrical and mechanical components, and control systems, • Good communication and customer-facing skills, • Understanding of thermodynamics, heat transfer, and fluid dynamics as applied to cooling systems, • Experience supporting system improvements, modifications, and upgrades, • Ability to diagnose issues such as leaks, pump failures, pressure irregularities, and performance inefficiencies, • Experience implementing preventative maintenance strategies to ensure system reliability, • Strong problem-solving and decision-making skills, • Ability to work independently and as part of a team, managing multiple priorities, • Detail-oriented with good documentation and reporting skills, • Willingness to travel and work across a range of industrial environments, • Knowledge of health & safety requirements within field service operations Key Words: Cooling Engineer, Field Service Engineer, Cooling Service Engineer, Refrigeration Engineer, Plastics, Injection Moulding, Ancillary Equipment, Process Cooling Engineer FOOTER Due to the sheer volume of applications we receive we will only contact successful applications that meet the requirements of our client job brief. Therefore, if you have not heard from us within 10 working days, please deem your application as unsuccessful. For all UK job positions work seekers must be eligible to work and live in the UK Sierra 57 Consult Technical Engineering & Manufacturing Recruitment Specialist Plastics, Packaging & Precision Engineering Sierra 57 Consult Ltd are acting as an Employment Agency in relation to this vacancy. In compliance with the new regulations (April 2004) in place under the Employment Agencies Act, Sierra 57 Consult will require proof of identification. A current copy of a passport, driving license, ID card or NI card will be required as part of the registration process. Email copies are acceptable. Sierra 57 Consult has been designed to project manage the mechanics of all aspects concerning the recruitment processes, implementing a simple and succinct method for targeting and introducing bona fide and skilled candidates to reputable clients and potential employers. If this advertised position does not interest you, please consider our other opportunities by sending your updated CV outlining your achievements and your personal requisites, i.e. salary, location, job roles. Please just Google Sierra 57 & register with us. JBRP1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings for both civil and defence applications. We are looking for a Design Engineer to join our Transparencies team to support new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. This is more than a CAD role, as a Design Engineer you will be responsible for creating and maintaining product definition and ensuring ongoing product performance against requirements. Working across the product lifecycle you will be involved in: New product development activities including requirements management, geometric design, materials selection, specifications, product verification, qualification and certification testing. Product sustaining activities including MRB, customer concession management, manufacturing problem solving, engineering change management and in service technical support to our customers as a part of an Integrated Programme Team. Continuous improvement of products, processes, tools and design handbooks to ensure the highest standards of quality and compliance to evolving customer, regulatory, and airworthiness requirements. Core operational hours at our Luton site are Monday to Thursday, 07:3016:30, and Friday, 07:3012:30. Some flexibility may be available, subject to agreement with manager. There may also be an opportunity to work from home one day per week, depending on business needs. Occasional travel, both nationally and internationally, may be required to meet suppliers, customers, and visit other GKN Aerospace sites. Job Responsibilities Develop design solutions compliant to customer, regulatory, and airworthiness requirements within assigned programmes/ projects budget and timescale. Create and maintain design definition documents including drawings, specifications and reports detailing dimensions, materials, manufacturing process requirements and tolerances needed to ensure functional design requirements are met. Understand the qualification process of products and prepare compliance documentation to internal, customer, and regulatory requirements where applicable. Represent Design Engineering function in Integrated Program Teams (IPT) and Material Review Board (MRB). Identify and resolve product non-compliances with drawing, specifications, or standards. Provide technical support by implementing solutions to address non-conforming products. Create supporting documents such as permits, concessions, rework schemes etc. Support internal and external technical reviews including formal gate reviews by creation and preparation of technical data and presentations of product design. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Take an active role in team engagement surveys, activities and in creating a personal development plan supported by your line manager Profile description: To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Bachelors degree in Mechanical, Aerospace, Electrical or any relevant Engineering field Good interpersonal and communication skills, able to create clear, concise and accurate technical content. Logical and methodical approach to task planning and be able to demonstrate an evidence-based approach to decision making and problem solving. Able to work independently and as part of a multi-disciplinary team. Working knowledge of MS Office suite. Desirable: Previous experience in Aerospace sector Experience of Configuration Control & Change Management Awareness of Aerospace certification requirements. Experience of using CAD software, preferably CATIA V5. Experience of using SAP You should have an understanding of the product development lifecycle, design practices and manufacturing methods. This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As a Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Please note: Some GKN Aerospace programmes are subject to regulatory restrictions which may impact certain Nationalities, as such part of the application process you are asked to declare. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

We are looking for a Senior Manufacturing Engineer to join us at Leonardo in the Luton Manufacturing Engineering Team. You will be part of the Manufacturing Operations business unit, which is a leader in delivering defence electronics, mission critical systems for situational awareness, electronic warfare, communications and surveillance across the land, air and sea domains. As a Manufacturing Engineer, you will have the opportunity to build cross‑functional relationships and be a positive influence within the project teams to support the future of the business and affect the production process. As a Senior Manufacturing Engineer, you will be responsible for the smooth transition of our new products from design into manufacture and will lead the front‑end manufacturing engineering activities, from providing DfX input into the design (i.e. design for manufacturing, assembly and test), to solving production capability issues. Your technical and project management skills will help to ensure that new products are introduced into operations in a timely, efficient, cost effective and accurate manner. • Developing manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; understanding feedback from Leonardo operators, conferring with equipment vendors or external suppliers, • Participating and supporting Manufacturing Maturity Reviews, maintaining governance through the Lifecycle Management process and creating/contributing to Manufacturing Plans, • Providing manufacturing decision‑making information to aid the:, • review of production schedules; reviewing production labour and material costs; estimating future requirements, • preparation of product and process reports by collecting, analysing, and summarising information and trends, • Building prototype products, writing work instructions and training manufacturing staff, • Resolving routine, and some complex, product and/or production issues and constraints (relieving bottlenecks) on the shop floor, reacting efficiently to escalation from manufacturing teams, • Improving manufacturing efficiency by participating in capacity analysis, simulation planning workflow, space requirements, and equipment/process layout, • HND (or higher) in a relevant engineering discipline (e.g. electronics, mechanical), or equivalent experience in a similar role, • Excellent practical knowledge of manufacturing processes and principles, • Pro‑active, ‘can do’ attitude with good problem‑solving and data analysis skills, • Ability to articulate and explain technical understanding, • Demonstrated experience of having own work peer reviewed and implementing subsequent actions, • Demonstrated knowledge of more than one phase of the Product Life Cycle and the associated discipline processes This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skills are being a team player and having a good attitude and willingness to learn. This role is subject to pre‑employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for the Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit https://careers.uk.leonardo.com/gb/en/security-and-vetting At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company‑funded benefits package that supports your wellbeing, career development, and work‑life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive. • Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi‑days each year., • Secure your Future: Benefit from our award‑winning pension scheme with up to 15% employer contribution., • Your Wellbeing Matters: Free access to mental health support, financial advice, and employee‑led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity)., • Rewarding Performance: All employees at management level and below are eligible for our bonus scheme., • Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning., • Refer a friend: Receive a financial reward through our referral programme., • Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, technology and lifestyle discounts, gym memberships and more., • Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger – apply now! GB - Luton - Cap. Green 300 Permanent Hybrid #J-18808-Ljbffr

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary GKN Aerospace is an original aerospace innovator. Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. We are seeking a Senior Engineer with a strong Systems Engineering background to join our Luton manufacturing team and contribute to the future of aviation. The Senior Systems Engineer is responsible for developing, integrating, implementing, and verifying technical solutions and associated compliance documentation, ensuring alignment with all applicable customer, regulatory, and airworthiness requirements, while meeting agreed programme, schedule, and manufacturing constraints. This is a very exciting and potentially career defining opportunity. You will be a leading member of the team embarking on a significant and challenging technology development project, where we are developing new Ice Detection Systems for aerospace applications. Our core working hours at the Luton site are 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays. The role includes occasional national travel to support customer and supplier visits, as well as visits to our Global Technology Centre in Bristol. We also offer a hybrid working arrangement, with the opportunity to work from home for up to two days per week, depending on business needs. Job Responsibilities Quality assurance reviewer of design deliverables created by the GKN Defence - Systems Engineering team Data analysis and reporting into qualification arguments and submissions for GKN Defence avionic, control systems and sub-systems Release of stakeholder and internal technical communications Technical work breakdown of program planning objectives Assure best practice development within systems engineering excellence Mentor and develop systems engineering team members System engineering inputs to technology incubator process Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC, degree or equivalent experience in electrical or systems engineering Significant experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment Electronics pcb design experience Proven design and delivery of high quality and reliable systems in a complex regulatory environment (e.g. MIL-STD, TUV cert, etc) Proven track record (minimum 1 project), in compliance planning and verification & validation analysis for product release Advanced experience of the Systems Development Lifecycle process Intermediate experience of requirement decomposition and tools (e.g. DOORS) Intermediate experience defining system / modular architecture Advanced experience developing system control functions & logic models Ability to design and set-up experiments and fixtures for testing CATIA V5 interrogator (minimum) Proficiency in Microsoft Office Applications. Essential General Experience: Technical leadership - Ability to mentor develop functional team members Confident presenting technical information to a wider audience including senior stakeholders and internal customers Live the culture of Plan-Do-Check-Act and continuous improvement Hands-on approach Have a real desire to be up close to the components and people that build our systems. Desirable: Working experience delivering system designs using MBSE toolbox (e.g. SysML) Experience in safety assessment software/toolbox FTA and FMEA (e.g. ANSYS Medini, Isograph) Proficiency in multi-domain modelling/simulation packages (e.g. MATLAB, Simulink, Simscape, Amesim) We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? JBRP1_UKTJ

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our BlueBear Business Unit. To provide strategic leadership and technical direction for the mechanical engineering department, overseeing the design, development, and delivery of complex aerospace and defence systems. You will be responsible for the mechanical engineering lifecycle, ensuring all solutions meet rigorous quality, safety, and regulatory standards while managing departmental budgets and resource allocation. Key Responsibilities: Leadership & Strategy: Define and implement the mechanical engineering strategy and vision in alignment with overall business objectives and the Product Maturity Roadmap. Department Management: Lead, mentor, and develop a multidisciplinary team of mechanical engineers, managing recruitment, performance reviews, and professional growth. Technical Oversight: Act as the Design Authority for mechanical systems, providing final approval for engineering drawings, 3D models, and manufacturing data packs. Project Delivery: Oversee the planning and execution of all mechanical engineering deliverables to ensure they are completed On Time, On Cost, and to Quality (OTOCOQ). Financial Accountability: Manage the departmental P&L and budgets, ensuring effective resource deployment and cost control across multiple programs. Process Improvement: Drive continuous improvement initiatives in design methodologies, analysis techniques (FEA/CFD), and the implementation of PLM/PDM systems (e.g., Windchill, Teamcenter). Regulatory Compliance: Ensure all designs comply with Civil and Military Aviation regulatory requirements (CAA, MAA, EASA) and industry standards such as BS8888 and AS9145. Stakeholder Engagement: Act as the primary technical point of contact for key customers, partners, and suppliers, supporting new business capture and technical trade studies. Skills and Experience: Essential Skills Professional Experience: 10-15+ years in a senior or head of engineering role within the aerospace, defence, or aeronautical industry. Technical Expertise: Deep knowledge of mechanical principles, 3D CAD (Creo/SolidWorks), GD&T, and advanced analysis tools like ANSYS or MATLAB. Leadership: Proven ability to lead and motivate large teams (10+ engineers) through complex hardware development lifecycles. System Integration: Experience in the mechanical integration of electronics, propulsion systems, and payloads into airframes or unmanned systems. Business Acumen: Strong understanding of financial management, risk assessment, and concurrent engineering practices. Communication: Exceptional written and verbal communication skills for presenting technical results and KPIs to senior stakeholders. Desirable Skills Degree in Mechanical or Aerospace Engineering (Masters level preferred). Chartered Engineer (CEng) status with a recognized body (IMechE, RAeS) is highly desirable. Ability to obtain UK Security Clearance (SC level). Other Duties and Responsibilities To actively participate in Blue Bear's Performance Management Scheme. To undertake such other duties and responsibilities as may be reasonably required within the grade and level of the post. You will be expected to perform different tasks as necessitated by your evolving role within the company and the overall business objectives of the company. Some travel within the UK may be required. The above is not an exhaustive list of duties. You will be expected to perform different tasks as necessitated by your evolving role within the company and the overall business objectives of the company. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. JBRP1_UKTJ

Ampre Recruitment is working with an SMPS design house that is seeking a highly skilled and experienced Senior Power Supply Design Engineer to join a dynamic engineering team. As a Senior Power Supply Design Engineer, you will be responsible for designing cutting-edge low and high-power DC-DC, AC-DC, and DC-AC Converters and Inverters. Your innovative designs will play a critical role in powering a wide range of electronic devices and systems, from portable electronics to high-power industrial applications. Responsibilities: Power Supply Design: Lead the end-to-end design process for DC-DC, AC-DC, and DC-AC Converters and Inverters, from conceptualization to product realisation. Employ state-of-the-art design techniques and technologies to achieve high efficiency, reliability, and performance. Technical Expertise: Demonstrate deep expertise in power electronics and power supply design principles. Analyze system requirements and specifications to develop efficient and cost-effective solutions that meet or exceed industry standards. Simulation and Prototyping: Utilize simulation tools like SPICE, PLECS, or other relevant software to model and analyze power supply circuits. Design and build prototypes to validate the performance of the designs and make necessary improvements. Component Selection: Collaborate with the procurement team to select appropriate components, including semiconductors, magnetics, and passive components, considering factors such as efficiency, cost, and availability. Design Validation: Conduct rigorous testing and validation of the power supply designs to ensure compliance with safety standards, EMC/EMI regulations, and other relevant industry specifications. Failure Analysis: Investigate and resolve any issues related to power supply performance, efficiency, or reliability, using analytical tools and methods to identify root causes and implement corrective actions. Cross-functional Collaboration: Work closely with cross-functional teams, including hardware and software engineers, to integrate power supply designs into larger systems and products. Documentation: Create detailed design documentation, including schematics, layout guidelines, and design specifications, to facilitate the smooth transition from design to manufacturing. Research and Innovation: Stay abreast of the latest trends and advancements in power electronics and power supply design. Continuously seek opportunities to improve existing designs and propose innovative solutions. Mentoring and Leadership: Provide guidance and mentorship to junior engineers, fostering their technical growth and ensuring best practices are followed throughout the design process. Requirements: Bachelor's or Master's degree in Electrical Engineering or a related field. A Ph.D. is a plus. Proven track record of at least 5-8 years of experience in power supply design, with a focus on DC-DC, AC-DC, and DC-AC converters and inverters. In-depth knowledge of power electronics, including power semiconductors, magnetics, and control techniques. Strong experience with simulation tools (SPICE, PLECS, etc.) and power supply design software (e.g., Altium, Cadence). Familiarity with industry standards and regulations related to power supply design, such as IEEE, IEC, and UL. Proficiency in using lab equipment for testing and validation purposes. Excellent problem-solving skills and the ability to troubleshoot complex power supply issues Strong analytical and technical leadership capabilities, with a track record of leading successful projects. * Excellent communication skills and the ability to work collaboratively in a team-oriented environment. Join a team of passionate engineers and contribute to the development of innovative power supply solutions that power the technology of tomorrow. As a Senior Power Supply Design Engineer, you will have the opportunity to shape the future of electronic devices and systems across various industries

Commissioning Engineer Location - Luton We are recruiting for Commissioning Manager to effectively deliver the commissioning of wastewater and sludge treatment process plant from completion of construction through to successful Take-Over. - Electrical inspection of cable terminations and glanding in the field and producing marked-up as-built electrical drawings, - Identify and resolve electrical issues through effective fault finding and troubleshooting, - Testing and commissioning of electrical power and ICA control systems including motors, setting up inverter drives, magnetic flow meters, pressure transducers, level instrumentation and valve actuators, - Functional testing of analogue and digital signals to the PLC and SCADA, - Initial start-up and wet commissioning of pumps, blowers, gas boosters, sludge screens, mixing pumps and gas compressors in accordance with the manufacturer's instructions, - Functionality testing of process plant as part of Site Acceptance Testing, - Completion of detailed commissioning reports to support Take-Over, - Ensure commissioning activities comply with Electrical Site Safety Rules and Health and Safety regulations. Key Tasks and Accountabilities - Supply, Design and Delivery (including Health, Safety, Environment and Welfare) - Specific experience in electrical engineering design on capital water projects. - The ability to take full responsibility for producing, checking, and approving commissioning test sheets, - Work with the delivery team to organise the methodology for shut down / removal from service of plant in a timely fashion. - Providing support to contractors as well as ensuring company standards in health & safety, environmental and quality are being met by the supply chain. Quality Assurance, Handover and Commissioning - Support the implementation and monitoring of Business Assurance Systems (BAS) policies and procedures. - Ensure works are delivered in accordance with the Project Brief and Asset Standards - Manage DALUX (Quality Handover Portal) to ensure documents mirror what has been delivered on site and are line with the Contract Requirements. - Engaging with the Supply Chain and support the contractor deliver the Take-Over Testing. Commercial, Programme and Planning - Support with work relating to financial forecasts and reviews with Commercial Team - Escalate where expectations are not met and identify areas of opportunity and improvement - Implement and monitor day-to-day activities (Short Interval Control), in line with short, medium and Contract Programme. - Cooperate and coordinate with all stakeholders including the client-side, internal and supply chain to ensure the project outcomes are achieved. Skills Experience and Knowledge - A minimum City & Guilds NVQ Level 3 qualified, - Knowledge and experience of Wastewater and Sludge Treatment processes - ECS (JIB) Gold Card holder, - Experience in supervising electrical installation on capital projects with a minimum 4 day qualification in safety (such as IOSH, SSSTS or SMSTS), - CSCS and Or CPCS Card, - Strong technical background in Electrical Engineering, - Experience of carrying out Authorised Person (LV) duties, - The ability to effectively engage others to achieve project goals and to operate on a variety of diverse tasks, with a strong attention to detail and a proactive approach to work - The ability to work in complex organisations in a team environment and develop relationships and rapport with external clients and internal colleagues. - The able to take full responsibility for producing, checking and completing inspection and test sheets and other necessary documentation required for Take-Over

Site Services Engineer Location: Luton Job Type: Permanent, Full-Time About the Role We are working with a well-established engineering services provider with a strong UK presence and a blue-chip customer base across multiple industrial sectors. The business specialises in optimising asset performance, including motors, gearboxes, pumps, machining, induction, condition monitoring, and fabrication services. As a Site Services Engineer, you will play a key role in the removal, installation, dismantling, rebuild, and refurbishment of plant and equipment within the Water and Industrial sectors. This includes working on pumps, gearboxes, motors, generators, and similar rotating equipment. You will also be responsible for completing all onsite inspection and assembly documentation while ensuring compliance with company procedures, policies, and work instructions. Key Responsibilities Follow all company, site, and client health & safety procedures, promoting a strong safety culture at all times Maintain a clean, organised, and controlled working environment Work in line with agreed Method Statements and Work Instructions Carry out root cause analysis and fault finding on electro-mechanical equipment Produce detailed reports outlining findings, causes, and recommended corrective actions Perform on-site maintenance, repairs, and refurbishment where required Dismantle and remove rotating and mechanical equipment for repair Rebuild, repair, test, and commission equipment both in workshop and onsite Reinstall equipment and carry out field testing and commissioning Conduct planned service and maintenance visits Respond to breakdowns as required Support workshop-based activities when neededKey Skills & Qualifications Essential Mechanical apprenticeship (time-served) with ONC, HNC, NVQ or equivalent Minimum of 3 years' experience in a similar field-based role Flexible approach to working hours Basic understanding of health & safety practices in industrial environments Full UK driving licenceDesirable Experience within the water industry or process plants Knowledge of heavy industries (e.g. steel, paper, power) Confined space certification ATEX experience Overhead crane or lifting equipment licences Forklift (counterbalance) licence Lifting & slinging qualification Water hygiene certification Relevant site safety passports (e.g. CSCS, CCNSG, Thames Water Passport) Multi-skilled (electro-mechanical) capabilityTechnical Competencies Strong understanding of engineering principles Ability to interpret technical drawings and parts lists Solid mechanical repair and fault-finding skills High level of accuracy and attention to detail Effective communication skills (written and verbal) Ability to liaise with subcontractors and coordinate site services (e.g. cranes, scaffolding) Strong organisational skills and ability to meet deadlines Capable of working independently or as part of a team Willingness to undertake further training and development

The Role Permanent Full Time Deritend, part of the Rubix Group of Companies, was founded in 1898 and serves more than 3,500 customers in the UK and boasts a blue-chip client base that includes some of the largest manufacturers and best-known brands in the world. We specialise in optimising asset performance, including motors, gear boxes, pumps, machining induction, condition monitoring and fabrication services. As a Site Services Engineer you will be primarily involved in the removal, installation, dismantling, rebuild and refurbishment of plant and assets in the Water industry and Industrial facilities sectors. This will include, but is not limited to pumps, gearboxes, motors, generators and similar equipment. You will be responsible for ensuring all onsite inspection and assembly documentation are completed and procedures, policies and work instructions are followed. Key Responsibilities Adhere to Company, Site & Client, H&S policies and procedures at all times, ensuring the safety of yourself and your colleagues. Routinely promote a safe working culture. Work in an efficient and effective manner, maintain an organised and controlled workspace. Working within the agreed Method Statements and Work Instructions: Conduct root cause and fault-finding analysis on electro-mechanical equipment and systems. Document findings, causes and corrective actions, recommending repairs, replacement parts and spares requirements into customer reports. Where appropriate and feasible, undertake on-site maintenance, repairs and refurbishment. Undertake the dismantling and removal of rotating equipment and other mechanical equipment for removal from site as required. Fully dismantle, clean, prepare, repair, refurbish, rebuild and test completed equipment as required. Undertake the re-installation of all types of rotating equipment and other mechanical equipment following workshop repair, and conduct field tests and commissioning as per agreed contract. Undertake routine service and maintenance work on client's sites. Attend breakdown work on clients' sites as required. Work in the Company's workshops as business needs dictate. Key Skills / Qualifications Essential Mechanical apprenticeship, time-served and indentured to ONC & HNC, NVQ, or equivalent qualifications. A minimum of 3 years' experience in a similar, field based, role and working environment. Flexible approach to working times in line with company's reactive nature. Knowledge of basic H&S requirements on a construction / production site. Full clean UK driving licence. Desirable Knowledge of water process equipment, plants and industry. Knowledge of general heavy industry such as steel, paper, power etc. Confined space qualification. Working within ATEX standards. Overhead operator license. Counterbalance forklift license. Lifting and slinging qualification. Water Hygiene qualified. Thames Water Passport. H&S passport (CSCS, CCNSG). Multi skilled (electro-mechanical capability) an advantage. Technical Skills Practical understanding of Engineering principles. Ability to read, and understand, all technical aspects from drawings and parts lists. Good understanding of mechanical repair techniques. Demonstrate accuracy and thoroughness to quality of work. Excellent verbal and written communication skills, team and customer facing. Ability to liaise with subcontractors, Cranes, scaffolding, plant access, etc. Ability to work to deadlines. Initiative to work on own or as part of a team. Ability to manage a varied workload. Willing to undergo additional training as required / where necessary. TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a member of the Manufacturing Engineering Team, the Senior Manufacturing Engineer will initially report to the Manufacturing Engineering Manager, with daily leadership and support provided by the Team Leader. Working across Civil and Defence business lines and based at our Luton site, occasional travel to visit equipment suppliers will be required. The Senior Manufacturing Engineer will work on several value streams within current programmes developing new and existing manufacturing processes whilst supporting the day-to-day operations team at Luton. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Local project technical lead for the implementation of production planning, from original concept through to production. Design high capability manufacturing processes using GKNs Zero Defect Manufacturing (ZDM) tool suite, including the APQP Core Tools. Develop, document and optimise new and existing manufacturing processes such as creation/amendment SOP (Standard Operating Procedure) and Process Specifications Create and update engineering documentation to maintain configuration control and help manage point of introduction activities, first article inspection and customer approval Lead structured improvement activities to reduce process driven scrap and rework Provide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answered Make presentations at senior level internally and externally demonstrating ability to clearly communicate to the audience Identify, anticipate and offer solutions to technical problems Establish & improve production process controls Comply with company Environmental, Health, Safety and Energy procedures. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Minimum HND qualification (or equivalent) in Mechanical, Electrical, Industrial or Manufacturing Engineering/Aerospace Demonstrable Manufacturing Engineering experience gained from ideally the Aerospace, Automotive, Yellow Goods industry 6Sigma Greenbelt qualification Experience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process Capability Experience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniques Demonstrable experience of practical problem-solving techniques using A3 or 8D Desirable: Experience Leading Lean Manufacturing including process standardisation kaizen activities such as 5S Experience in lay-up processes for composite materials Specification interpretation experience We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Senior Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in your approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Key responsibilities include: Leading and facilitating studies such as HAZOP, HAZID, LOPA, FERA, and QRA Supporting SIL determination, SIF design, and SIL verification activities Providing engineering solutions to close risk gaps and improve asset safety Supporting Management of Change (MOC), incid

A strong background in process safety engineering, with TÜV certification, is essential for success in this position. NES Group Ltd is seeking an experienced Process Safety Engineer to join their team in Norwich. You will be responsible for facilitating risk assessments, mentoring junior engineers,

A leading engineering staffing provider in the UK is seeking a Process Safety Engineer to join their team. This role requires at least 15 years of experience in process safety engineering, providing technical leadership and engaging in risk assessments. The candidate should possess extensive knowled

You will bridge the gap between high-level engineering calculations and client-facing project management, leading small teams of junior engineers to deliver world-class safety solutions. Mosaic is seeking an experienced Senior Chemical/Process Engineer to join our Bath-based team. Lead process desig

The process Safety Engineer is expected to apply extensive engineering skills, knowledge of process safety principles, and leadership skills to provide leadership in the application of process safety engineering principles in support of meeting the project objectives. They will support the Lead Proc

The successful candidate will have a strong process engineering background, significant experience in process safety, and a deep understanding of risk assessment methodologies and functional safety standards, particularly IEC 61511. Minimum of 8 years experience in process and process safety enginee

Your safety is our priority, so we'll insure you in case of accidents, too.

Ensure robust Health, Safety, and Environmental (HSE) performance: maintain accurate site information, RAMS and risk assessments; identify and mitigate risks; model “safety excellence” and foster a continuous improvement culture with team led safety initiatives. Ensure compliance with client spe

You will conduct regular site visits to monitor progress, prepare and present project reports, and ensure compliance with safety and quality standards. Strong knowledge of electrical systems, construction processes, and project management methodologies.

Apply robust change control processes for any deviations from agreed objectives.

Monitor and ensure a high standard of health and safety.

Join Evri as a self-employed delivery driver and start earning in days, not weeks with our fast-track application process.

Ensuring finance processes are optimised and aligned with the new system.

Join Evri as a self-employed delivery driver and start earning in days, not weeks with our fast-track application process.

Project Manager Placement Programme - No Experience Required.Are you looking to kick-start a new career in Project Management?.We are recruiting for companies who are looking to employ our Project Management Traineeship graduates to keep up with their growth.The best part is you will not need any pr

Join Evri as a self-employed delivery driver and start earning in days, not weeks with our fast-track application process.

Project Manager - Retail Business .Hybrid with occasional travel to offices in central Lincoln.Day rate up to £550 per day inside IR35.Strong experience across both infrastructure and software projects required.Planned start date - July/August 2026.A successful retail business is looking for a

Our Client based in Stevenage are looking for Class 1 Delivery Drivers to join their busy team.Primarily multi-drop deliveries to our customer's stores.Reporting to a Transport Front Line Manager and ensuring the safe and timely delivery/collection of goods.Must have a valid CPC and Tacho card.Must

I am currently recruiting for a Finance Project Manager to work within a local authority.The role will be for 6 Months at least and will be paying £550 p/day Main responsibilities include:-.Designing and implementing approaches that support continuous improvement in finance management practice.Supp

Reliable, professional, and safety-conscious.

Proven experience in project management, operations, or process improvement. Strong track record of managing client onboarding or similar customer-facing operational processes. Ability to drive continuous improvement and scale processes in a growing business.

Astute's Power team is partnering with a leading power protection solutions provider, known for its commitment to technical excellence and professional development, to recruit a Project Engineer to cover the South of England. This strategically important Project Engineer role comes with a competitiv

Location: Hybrid, North West with travel to schemes on average, once a week and occasional travel to Accent offices.Salary: £48,683 per annum (including car allowance).Permanent, 35 hours per week, Monday Friday 9am to 5pm.We believe everyone should have a safe and affordable place to call home.It

Travel Allowance + Stay Away Expensed + Discretionary Bonus + Pension + Holidays + Private Medical Insurance + Package + Technical Progression + 'Immediate Start'.Take on the role of a Senior CSA Project Manager with a rapidly growing contractor in the thriving data centre / pharmaceutical / manufac

An opportunity has arisen for an experienced and driven Project Engineer to support the successful delivery of MEICA projects across the UK. Working closely with project teams, clients, subcontractors, and site personnel, the role involves overseeing engineering activities from planning and procurem