Process safety engineer jobs in SheffieldCreate job alerts

REED Engineering & Manufacturing are working with leading Engineering & Manufacturing company\n\nThe Pyrometry Engineer Lead is the site's technical authority for AMS2750 compliance and all heat‑treatment pyrometry activities. This role oversees the Thermocouple Laboratory, manage calibration programmes, and ensure all furnaces and thermal processes meet stringent regulatory and customer standards. Acting as a key partner across Manufacturing, Quality, Maintenance, and Engineering, the role drives furnace performance, product integrity, and continuous improvement across all thermal operations.\n\nKey Responsibilities\n\nLead site-wide compliance with AMS2750 and pyrometry standards.\nManage the Thermocouple Laboratory, including technicians, processes, and inventory.\nGovern thermocouple selection, calibration, traceability, and deployment.\nDirect and approve all TUS, SAT, and furnace calibration activities.\nMaintain and approve all calibration documentation and certifications.\nDevelop and control pyrometry procedures, quality standards, and technical documentation.\nProvide expert guidance for furnace troubleshooting, root‑cause analysis, and NCRs.\nSupport internal, customer, and third‑party audits as the site pyrometry SME.\nDrive continuous improvement in furnace reliability, process capability, and operational efficiency.\nInfluence long‑term thermal processing strategy across cross‑functional teams.\nPromote strong safety, environmental, and quality governance in a heavy‑engineering setting.Skills & Experience\n\nExpert knowledge of AMS2750, pyrometry, and heat‑treatment standards.\nStrong background in metallurgy and heat‑treatment science.\nDeep understanding of thermocouple technologies and furnace control systems.\nSkilled communicator able to influence senior stakeholders.\nProven capability in structured problem‑solving and risk assessment.\nStrategic thinker with a strong compliance and operational mindset.Essential Skills\n\nStrong knowledge of AMS2750 and thermal processing standards\nUnderstanding of metallurgy and heat‑treatment effects on materials\nExperience with thermocouples, calibration methods, and temperature‑measurement systems\nAbility to set up temperature‑monitoring equipment and collect accurate data\nClear communicator able to influence stakeholders and write precise procedures\nSkilled in risk assessment, root‑cause analysis, and problem‑solving\nQuality‑focused with a strong compliance mindset\nAble to work safely and effectively in a heavy‑engineering environment

REED Engineering & Manufacturing are working with leading Engineering & Manufacturing company The Pyrometry Engineer is the site’s technical authority for AMS2750 compliance and all heat-treatment pyrometry activities. This role oversees the Thermocouple Laboratory, manage calibration programmes, and ensure all furnaces and thermal processes meet stringent regulatory and customer standards. Acting as a key partner across Manufacturing, Quality, Maintenance, and Engineering, the role drives furnace performance, product integrity, and continuous improvement across all thermal operations. Key Responsibilities • Lead site-wide compliance with AMS2750 and pyrometry standards., • Manage the Thermocouple Laboratory, including technicians, processes, and inventory., • Govern thermocouple selection, calibration, traceability, and deployment., • Direct and approve all TUS, SAT, and furnace calibration activities., • Maintain and approve all calibration documentation and certifications., • Develop and control pyrometry procedures, quality standards, and technical documentation., • Provide expert guidance for furnace troubleshooting, root-cause analysis, and NCRs., • Support internal, customer, and third-party audits as the site pyrometry SME., • Drive continuous improvement in furnace reliability, process capability, and operational efficiency., • Influence long-term thermal processing strategy across cross-functional teams., • Expert knowledge of AMS2750, pyrometry, and heat-treatment standards., • Strong background in metallurgy and heat-treatment science., • Deep understanding of thermocouple technologies and furnace control systems., • Skilled communicator able to influence senior stakeholders., • Proven capability in structured problem-solving and risk assessment., • Strong knowledge of AMS2750 and thermal processing standards, • Understanding of metallurgy and heat-treatment effects on materials, • Experience with thermocouples, calibration methods, and temperature-measurement systems, • Ability to set up temperature-monitoring equipment and collect accurate data, • Clear communicator able to influence stakeholders and write precise procedures, • Skilled in risk assessment, root-cause analysis, and problem-solving, • Quality-focused with a strong compliance mindset, • Able to work safely and effectively in a heavy-engineering environment

This is an excellent opportunity to join a growing UK engineering group specialising in high-precision mechanical and hydraulic solutions. The business is expanding with a brand-new, purpose-built workshop in Rotherham, focused on industrial gearbox overhauls and accredited rebuilds. They are seeking an experienced Workshop Engineer to play a key role in the setup and ongoing success of this new facility. Role Overview • Carry out full strip-down, inspection, diagnosis, and rebuild of large industrial reduction gearboxes, • Overhaul hydraulic pumps, motors, engines, and related mechanical components, • Work on complex, high-value assemblies requiring precision and strong technical knowledge, • Ensure all rebuild work meets required accreditation and quality standards, • Support workshop setup, workflow planning, and continuous improvement, • Contribute to a strong culture of safety, quality, and engineering excellenceRequirements, • Proven experience stripping and rebuilding industrial gearboxes (essential), • Strong background in hydraulics including pumps, motors, valves, and related systems, • Mechanical fitting/workshop engineering experience from industrial, plant, automotive, marine, or similar sectors, • Ability to work methodically and accurately on complex assemblies, • Strong work ethic, attention to detail, and good team communication skillsSalary and Benefits, • £40,000 - £45,000 per annum (DOE), • 45 hours per week, Monday to Friday 08:00-17:00, • Early finish on Fridays (around 16:00), • Occasional overtime available but not guaranteed, • Training provided on specialist gearbox systems, • Opportunity to work in a new, purpose-built accredited workshop, • Long-term career stability within an expanding engineering team

Job | Mechanical Design Engineer Company | Global Engineering Solutions Business Tech | Bulk Material Handling Solutions – heavy loads Tools | Solidworks, PDM, FEA Development | Various different pathways Location | Hybrid - South Yorkshire Offer | up to £55k + Private Medical + Performance Bonus We are seeking a skilled Mechanical Design Engineer to join a leading engineering specialist that delivers massive-scale mechanical solutions for complex industrial challenges. The company is a powerhouse in the bulk material handling sector, designing and installing robust systems that move the world’s most essential resources. As a Mechanical Design Engineer, you will take ownership of the design process for large-scale mechanical handling projects. You will work on everything from initial concept and structural calculations to detailed 3D modeling and final fabrication drawings. Your designs will be integrated into complex environments where reliability, safety, and durability are paramount. This is a role for an engineer who enjoys "heavy" engineering—think massive conveyors, loading systems, and automated material flow. Key Responsibilities: • Produce innovative mechanical designs for large-scale bulk material handling solutions., • Utilize 3D CAD (SolidWorks/Inventor) to create detailed models, assemblies, and manufacturing drawings., • Perform structural and mechanical calculations (stress, strain, torque, and loading) to ensure equipment integrity., • Manage the full design lifecycle, providing technical support from the bid stage through to installation and commissioning., • Ensure all designs meet rigorous safety standards and industry-specific regulations. What We Are Looking For: • Experience: A proven track record in mechanical design within a "heavy" engineering environment (e.g., bulk handling, mining, or bespoke moving structures like bespoke cranes)., • Technical Skill: Proficiency in 3D CAD and a strong grasp of fundamental engineering principles (BS 8888, Geometrical Tolerancing, etc.)., • Problem Solvers: Someone who thrives on bespoke projects where there is no "off-the-shelf" solution., • Communication: The ability to explain complex technical concepts to clients, fabrication teams, and project stakeholders., • Education: A degree or HND/HNC in Mechanical Engineering or a related discipline. Why Join Us? This is an opportunity to work on projects of significant scale and complexity. You will be part of a group that combines world-class hydraulic expertise, electrical engineering, with heavy-duty mechanical engineering. We offer a technical challenge that few other firms can match, alongside a commitment to professional development and career progression. If this sounds like something you want to be involved with then please click apply. We are unable to sponsor visas for this role. Important Information: Talentometry are accredited members of the Association of Professional Staffing Companies. We have put in place policies and procedures that go above and beyond legal requirements in how we manage your data. In applying for this role, Talentometry will be acting within your interest and will contact you in relation to recruitment purposes. For more information have a look at the ‘Candidate Journey’ page at talentometry.co.uk/candidate-journey/ which will take you through what to expect as candidate.

CT19 has partnered with an innovative clean energy business focused on delivering low-emission power solutions across industrial, infrastructure, and temporary power applications. Through the development of advanced energy technologies and sustainable fuel solutions, the company is helping accelerate the transition toward decarbonised energy systems. With a growing portfolio of projects across the UK, the business works with major organisations in construction, infrastructure, media, live events, and industrial sectors to provide reliable alternative energy solutions. Backed by strong industry partnerships and continued investment in new technologies, the company is entering an exciting phase of growth and expansion. This is an opportunity to join a forward-thinking engineering team working on cutting-edge energy projects in a fast-moving and collaborative environment. Senior Electrical Engineer The company is seeking a Senior Electrical Engineer to support the design, development, and delivery of electrical systems across a range of energy and process engineering projects. Working as part of a multidisciplinary engineering team, you will contribute to the development of electrical designs, technical documentation, equipment specifications, and site support activities. Senior Electrical Engineer responsibilities • Review and interpret customer specifications and technical requirements., • Support the development of electrical engineering documentation including:, • Single Line Diagrams (SLDs), • Block Line Diagrams (BLDs), • Cable calculations and selectivity studies, • Load lists, • Cable routing and termination drawings, • Equipment layouts and datasheets, • Functional Design Specifications (FDS), • User Requirement Specifications (URS), • Assist in the design and specification of electrical systems and equipment including transformers, switchgear, MCCs, generators, distribution systems, and control equipment., • Contribute to the preparation of technical documentation, bills of materials, and engineering calculations., • Ensure designs comply with relevant industry standards, client specifications, and safety requirements., • Support technical reviews of vendor quotations and equipment proposals., • Participate in site surveys and provide engineering support during installation and commissioning activities where required., • Respond to technical queries and support project teams throughout delivery phases., • Work collaboratively with other engineering disciplines to ensure coordinated project execution., • Provide guidance and support to junior engineers and designers where appropriate., • Contribute to continuous improvement of engineering standards, processes, and documentation. Senior Electrical Engineer requirements • Degree qualified in Electrical or Electrical/Electronic Engineering., • Proven experience within electrical engineering roles in industrial or process-related industries such as energy, oil & gas, utilities, manufacturing, pharmaceuticals, or similar sectors., • Strong understanding of electrical engineering principles and industrial power systems., • Ability to read and interpret technical drawings including SLDs, schematics, loop drawings, and P&IDs., • Experience producing electrical design documentation and calculations., • Familiarity with relevant industry standards and electrical codes., • Experience using Autodesk software such as AutoCAD or AutoCAD Electrical would be advantageous., • Good communication skills and the ability to work effectively within multidisciplinary teams., • Interest in renewable energy, sustainability, or emerging energy technologies would be highly beneficial., • Chartered status or progress toward Chartership is advantageous but not essential. What’s on Offer • Opportunity to work on innovative low-carbon energy projects., • Collaborative and growing engineering environment., • Exposure to cutting-edge technologies and large-scale energy infrastructure., • Career development opportunities within a rapidly expanding sector., • Above market salary offering plus benefits package.

About Plessey We’re building the hardware foundation for next-era computing. Plessey is a world-leading technology company driving the next generation of photonic devices and systems. With over 70 years of innovation, we combine research, materials science, process engineering, and manufacturing under one roof. We’re recognised as a global authority in microLED displays, optical computing, and optical interconnects. Join us to work on breakthrough technologies shaping the future of light-based technology and computing. Lead We don’t follow industry trends; we create them, pushing boundaries and setting standards others aspire to. Every team member has the power to make decisions, drive change, and deliver excellence. We support each other, challenge one another for the best solutions, and lead by example. Together, we build industries and technologies that shape the future and scale toward our vision of the next era of computing. Grow We expand our capabilities every day — deepening our expertise, improving how we work, and pushing the boundaries of what’s possible. Curiosity fuels us: we question assumptions, explore new ideas, and innovate with light-based technologies. By investing in and empowering our people, we strengthen Plessey’s impact and help shape the future of optical technology. Trust We operate like a family—honest, reliable, and supportive. We have each other’s backs, own our actions, and uphold the highest standards of integrity and safety. We trust each other to deliver, our customers to challenge us, and our expertise to guide the way. Together, trust enables the collaboration essential for breakthrough innovation and lasting impact. Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role We are looking for a Senior Software Engineer to support the development of automated reliability and characterisation test systems for MicroLED devices. The role combines test software development, instrument control, and data analysis, supporting both the execution of reliability campaigns and the analysis of device performance and degradation. The engineer will work closely with hardware engineers and test engineers to develop software tools that control laboratory equipment, automate test procedures, and analyse large datasets generated during device testing. Key Responsibilities • Develop and maintain automated test software for reliability and characterisation systems., • Interface with laboratory instruments and test hardware using LabVIEW, C++, and Python., • Support the execution of device reliability campaigns and engineering experiments., • Develop tools for data collection, processing, and analysis., • Work with engineering teams to interpret results and identify device behaviour trends., • Contribute to improving the automation and robustness of internal test platforms. Skills, Knowledge and Expertise • Master’s degree in Physics, Electronic Engineering, or a related discipline., • Proficiency in LabVIEW and C++., • Working knowledge of Python for data processing and analysis., • Hands-on experience with communication protocols such as SPI and I²C., • Experience working with laboratory bench instruments such as power supply units (PSUs), oscilloscopes, pattern generators and multimeters., • Strong analytical mindset with attention to detail., • Ability to work independently with minimal supervision. Advantage • Experience with NI TestStand for automated test environments., • Background or practical experience in semiconductor device testing., • Experience analysing large datasets and developing mathematical models for device behaviour and degradation., • Familiarity with reliability testing methodologies (e.g., lifetime or stress testing).

Role: Principal Civil/Structural Engineer Location: Devonport(Occasional site visit) Duration: 12 months(Long term - project goes until Dec 2028) Inside IR35 The role We are looking for a Principal Civil/Structural Engineer ‎to support delivery of civil/structural subway systems as part of the subways Team in Devonport. Lead on the Structural / Civil works required for: • Refurbishment design proposals for the existing extant subways within the 10D site. Day-to-day, you’ll be supporting the engineering capability of the new systems through the design lifecycle in accordance with the design process. Key responsibilities will include: • Lead and manage one or more technical design packages ensuring requirements are met through the design process, • Provide technical design guidance and review of sub-contract design to ensure compliance with specifications, technical regulations and standards, • Collaboration across engineering functions and stakeholders to integrate designs within the overall facility layout and manage interfaces, • Maintaining the engineering configuration of the design intent (change control) Essential experience: • Design of high complex services subways/routes preferably in a Nuclear/ Regulated environment, • Regulations, legislation and standards that are applicable to civil/structural design and construction (including Principal Designer responsibilities under CDM), • Substantiation of SFR’s when identified within systems to support the nuclear safety case, • Able to demonstrate relevant knowledge and skills required in the technical management of complex design development throughout the design lifecycle., • Provide expert advice to the sub-contracted design houses to enable them to develop the design., • Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements., • Experience of working in BIM environments., • Awareness of project planning, project management and budgeting., • Sound understanding of company and departmental procedures relating to Design, Health & Safety and Quality requirements and ability to manage projects in accordance with these procedures., • Collaborate with other design houses regarding the proposed works and the required changes to the subways to facilitate their designs., • Support development and lead implementation of assurance and governance activities for subway remedial works and new design development Qualifications • Degree in Civil/Structural Engineering., • Chartered Engineer with membership of an accredited body (i.e. ICE) or working towards chartered status. Or significant experience. Due to the nature of the work carried out at our client’s site, these roles are subject to specific nationality requirements and are only open to sole British citizens. Candidates who meet this criterion will also be required to undergo security clearance vetting.

MANUFACTURING ENGINEER SHEFFIELD COMPETITIVE SALARY Are you a Manufacturing Engineer with a strong focus on translating design into manufacturable products? In this role, you’ll take design drawings and convert them into ERP‑ready parts, accurate bills of materials (BOMs), and robust routings. You’ll also be responsible for continuously improving manufacturing processes, driving better performance across cost, quality and delivery performance. THE ROLE: As a Manufacturing Engineer, you will be required to: • Review and interpret design drawings, specifications, and standards to define robust manufacturing solutions, • Create and maintain accurate ERP master data, including parts, BOMs, routings, work centres, labour standards, and routing times, • Define manufacturing methods, sequences, tooling and work instructions to support efficient, right‑first‑time production, • Support accurate product costing, capacity planning and productivity improvement through high‑quality manufacturing data and analysis, • Collaborate with Procurement on make vs. buy decisions, supplier selection, technical clarification and resolution of supply issues, • Partner with Production, Planning, Quality and Maintenance teams to support smooth product introduction and ongoing manufacture, • Lead and support continuous improvement initiatives focused on cost reduction, cycle time reduction, waste elimination and process capability, • Provide day‑to‑day manufacturing support, including non‑conformance investigation, corrective and preventive actions and change control, • Support Lean Design for Manufacture, challenging designs that impact yield and approving detail part specifications, • Ensure compliance with quality, health & safety, environmental standards and company policies THE CANDIDATE: The ideal Manufacturing Engineer: • Proven experience in a manufacturing or process engineering role within a manufacturing environment, • Strong ability to interpret engineering drawings and specifications, • Hands on experience creating and maintaining BOMs and routings in an ERP system, • Good understanding of manufacturing processes, methods and tooling, • Strong problem solving and continuous improvement mind set, • Effective communication skills with the ability to work cross functionally, • Knowledge of lean manufacturing principles, • ERP experience, • Knowledge or experience of working with CAD BENEFITS: • Competitive salary + company bonus, • Tailored training and development, including company‑funded external qualifications where relevant, • Generous pension scheme with 7% employer contribution, • Life assurance at 3.5× your salary, • Employee Assistance Programme for confidential wellbeing support, • Discounted gym membership – up to 25% off at 4,000+ UK gyms, • Fuel card savings of 2–3p per litre at 3,500 stations, including BP, Esso and Shell, • Employee recognition schemes celebrating great work, • 33 days’ holiday per year (inclusive of bank/public holidays) ABOUT PROGRESS RAIL: Progress Rail, a Caterpillar company, is one of the largest integrated and diversified providers of rolling stock and infrastructure solutions and technologies for the global rail industry. The company provides advanced EMD® locomotives, engines, and technologies, railcars, trackwork, fasteners, signalling, rail welding and Kershaw Maintenance-of-Way equipment, along with dedicated locomotive and freight car repair services, aftermarket parts support and recycling operations. Progress Rail’s deep industry expertise ensures a commitment to quality through innovative solutions. With a global network across the United States, Canada, Mexico, Brazil, Germany, Italy, Australia, China, Germany, India, South Africa, the United Arab Emirates and the United Kingdom, we are committed to serving our customers. PROGRESS RAIL VALUES: • Integrity – the power of honesty, • Excellence – the power of quality, • Teamwork – the power of working together, • Commitment – the power of responsibility, • Sustainability – the power of endurance EQUAL OPPORTUNITIES: Progress Rail is an equal opportunity employer. All qualified applicants will receive consideration for employment. We value and embrace diversity of thought, background and unique experiences and we pride ourselves on being an inclusive workforce and culture. HOW TO APPLY: To be considered for this role, please click on the link provided. If you would like any further information about this vacancy before applying, please feel free to contact Taher Rahman at our Sandiacre site. We would politely request no agencies please.

Lift Engineer\nLift Service Engineer – Lift Industry\nSheffield, South Yorkshire\n\nBasic Salary: £42,000 – £46,000 per annum (dependent on experience)\nOTE: Up to £65,000+ per annum (including callout and overtime)\nCallout/Standby Earnings: £800 per week\nBenefits: Paid door-to-door travel time, unlimited paid overtime, company van & fuel card, 30 days holiday + 1 day on your birthday + 8 bank holidays, company pension scheme, NVQ 4 training fully funded, plus ongoing development and progression opportunities.\n\nMarmon Lift Recruitment is seeking an experienced Lift Engineer (NVQ Level 3 or equivalent) to join a highly respected and forward-thinking lift company operating across Sheffield and the surrounding Yorkshire region.\n\nThis role focuses on the servicing, maintenance, and minor repair of passenger lifts across a well-organised and local route, ensuring minimal travel and maximum earning potential.\n\nCommutable from: Sheffield, Rotherham, Barnsley, Chesterfield, Worksop, Doncaster, Wakefield, Huddersfield, Mansfield\n\nKey Responsibilities of a Lift Engineer:\n\n * \n\n Carry out routine lift servicing, maintenance, and minor repairs on a variety of passenger lift systems.\n\n * \n\n Diagnose faults quickly and provide first-time fixes wherever possible.\n\n * \n\n Log defects, manage parts orders, and keep accurate service records.\n\n * \n\n Participate in a fair and balanced call-out rota (including evenings and weekends).\n\n * \n\n Maintain high safety standards and ensure compliance with regulations.\n\nRequirements of a Lift Engineer:\n\n * \n\n Industry-recognised qualification – NVQ Level 3 or equivalent – Essential\n\n * \n\n Full, clean UK driving licence – Essential\n\n * \n\n Minimum 3 years’ experience in lift service or repair – Essential\n\n * \n\n Strong technical knowledge of various lift manufacturers and systems.\n\n * \n\n Confident in managing a service route of around 50–60 units across a local Yorkshire patch.\n\n * \n\n Currently living a commutable distance from Sheffield or surrounding areas – Essential\n\nApply to this Lift Engineer position:\n\n 1. \n\n For a confidential conversation, call (phone number removed) (Monday – Friday)\n\n 2. \n\n Ping us your CV by email\n\nMarmon Lift Recruitment takes pride in understanding what truly matters to you in your next career move. We ensure we represent your best interests throughout the process and help you take the next step in your lift industry career

Automatic Door Engineer\n\nDoor Industry, Door Repair, Door Installation\nSheffield, South Yorkshire\nSalary: £35,000 – £45,000 basic + benefits\n\nBenefits: Company van (available for reasonable personal use); Overtime opportunities; Ongoing training and manufacturer development; Career progression within a global engineering business; Pension scheme; Mobile phone and tablet provided.\n\nMarmon Lift Recruitment is working with a global entrance solutions company seeking to recruit an experienced Automatic Door Engineer to join its engineering team in Sheffield.\n\nThis is an excellent opportunity for an Automatic Door Engineer looking to join a well-established business offering long-term career progression, technical development, and a strong pipeline of work across the commercial and industrial sectors.\n\nThe company is ideally seeking candidates with experience in automatic doors; however, engineers with experience in revolving doors, industrial doors, high-speed doors, or roller shutters are also encouraged to apply.\n\nCommutable from: Sheffield, Rotherham, Barnsley, Chesterfield, Doncaster, Worksop, Dronfield, Mexborough, Retford, Wakefield, and the surrounding South Yorkshire areas.\n\nAutomatic Door Engineer Responsibilities:\n\n * \n\n Service, maintain, and repair automatic door systems\n\n * \n\n Carry out planned preventative maintenance and reactive breakdown visits\n\n * \n\n Diagnose electrical and mechanical faults efficiently and safely\n\n * \n\n Work on a variety of entrance systems, including sliding, swing, and revolving doors\n\n * \n\n Complete minor installation and upgrade works where required\n\n * \n\n Ensure all work is completed in line with health and safety regulations\n\n * \n\n Deliver high levels of customer service at all times\n\n * \n\n Complete accurate service reports and documentation\n\n * \n\n Participate in the on-call rota as required\n\nThe Ideal Automatic Door Engineer:\n\n * \n\n Previous experience working on automatic doors – PREFERRED\n\n * \n\n Engineers from revolving doors, industrial doors, high-speed doors, or roller shutter backgrounds will also be considered\n\n * \n\n Strong electrical and mechanical fault-finding skills – ESSENTIAL\n\n * \n\n EN16005 certification – DESIRABLE\n\n * \n\n BS7036 / DHF qualifications – DESIRABLE\n\n * \n\n Good customer-facing and communication skills – ESSENTIAL\n\n * \n\n Flexible approach to travel across the Sheffield region – ESSENTIAL\n\n * \n\n Full UK Driving Licence – ESSENTIAL\n\nApply for this role:\n\n 1. \n\n For a confidential conversation, call (phone number removed) (Monday–Friday)\n\n 2. \n\n Ping us your CV by email.\n\nMarmon Lift Recruitment is committed to understanding what truly matters in your next move. We work closely with you to ensure you have the right opportunity and represent your best interests throughout the process

Maintenance Engineer\n\n£45,000 Per Annum\n\nMonday - Friday - DAY SHIFT - 7am - 3pm + Company Van\n\n * Enhanced Overtime Rates\n\n * Company Profit Share Scheme\n\n * Training Courses + Upskilling Qualifications\n\nWe have partnered with a leading manufacturing company, are looking for a highly skilled and qualified engineer within any of the following sectors - Packaging, FMCG, Food Production, Warehouse, Manufacturing.\n\nThe main responsibilities of the Maintenance Engineer will include.\n\n * An mechanical and electrical maintenance focus across all production operations\n\n * Ensuring machinery is maintained and fully functional - Conveyors, robotics, cranes, automation equipment\n\n * Maintaining all mechanical and electrical process equipment.\n\n * Fault finding and diagnostics.\n\n * Following a PPM schedule and recording follow up work.\n\n * Continually developing to improve operations to drive improvements in quality, cost and safety.\n\n * Assisting production with machinery problems and setups, providing relevant training when appropriate.\n\nIf you are interested in this Maintenance Engineer role, please submit an up-to-date CV through this advert or call the Eko Talent on (phone number removed)

Principal Control Systems Engineer \nSheffield - Hybrid\nFull-time\nAre you ready to lead complex control systems projects from concept through to delivery?\nDo you enjoy combining technical leadership with client-facing responsibility?\nCould this be the step up where your engineering expertise shapes major projects in highly regulated environments?\nWhat's in it for you?\n·Fantastic basic salary \n·25 days annual leave plus 8 bank holidays, plus buy/sell up to 5 days leave per year\n·Hybrid working - 2 days from home per week\n·Flexible start and finish Times - Start between 7-10am and finish between 3-6pm, plus Flexi Fridays \n·Pension contributions are 4.5% employer, subject to a 5% contribution by the employee\n·Employee Health Cash Plan\n·Life assurance\nWhat will you be doing?\n·Leading the design, development and integration of advanced control systems \n·Reviewing and approving system architectures, designs and technical specifications \n·Taking ownership of testing, validation and commissioning activities \n·Managing technical delivery across projects, including quality, performance and compliance \n·Working closely with software, hardware, workshop and project teams to deliver successful outcomes \n·Leading technical discussions with clients and project teams to resolve issues \n·Supporting bids and providing technical sign-off during the tendering process \n·Mentoring engineers, developing team capability and providing line management support \n·Managing project resources, budgets, reporting and close-out activities \nWhere you'll be doing it?\nYou'll be joining a long-established engineering business with over 50 years of experience delivering digital transformation and system integration solutions across energy, nuclear and industrial manufacturing. The company works on complex, safety-critical projects and has a strong presence across the UK.\nWhat you'll need:\n·At least 7 years' experience in systems engineering, hardware design or electrical design \n·Strong knowledge of control systems and associated software and hardware \n·Experience with tools such as AutoCAD Electrical, SCADA packages, PLC packages and HMI packages \n·Experience applying systems engineering principles and system integration processes \n·Good understanding of project management, including cost control and client management \n·Basic understanding of contractual and commercial requirements \n·Experience of software development and hardware integration \n·Experience working on client sites \n·Strong communication and presentation skills \n·Ability to provide technical input during bids, including estimating time and effort \n·Leadership experience, with the ability to mentor, guide and support engineering teams \n·Experience in highly regulated industries would be useful \nWe appreciate your CV may not be up to date. No problem, just apply and we can deal with that later.\n\nImportant Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

BARROW OR SHEFFIELD based\n\nOur client, a leader in the Defence & Security sector, is currently seeking a Senior Systems Engineer for a contract position. This role, reporting to the Systems Engineering Function Lead within the Weapon Systems Engineering function, will require you to work from either Barrow or Sheffield, with occasional onsite work (1-2 days per month).\n\nKey Responsibilities:\n\nCapture and translate user needs, stakeholder needs and CONOPS\nConvert CONOPS into MBSE use cases and activity/sequence diagrams\nBuild MBSE architecture (form/function/behaviour) and allocate requirements\nLead requirements development (derivation, decomposition, traceability)\nDevelop and manage interface requirements and Interface Control\nDrive integration from component level through system level\nLead/support Verification & Validation activities and planning\nAct as a key technical interface to customers, suppliers and internal design teams (SW/Mech/Elec)\nSupport governance, continuous improvement and adherence to standards/best practice\n\nJob Requirements:\n\nUnderstanding of Health and Safety awareness, including Product Safety\nProduct Design knowledge in military or harsh environments\nAbility to make analytical decisions based on facts and data\nEffective communication skills across all levels and with internal/external stakeholders\nExperience in facilitating collaboration and co-operation within a team\nProficiency in design review facilitation and requirement reviews\nWorking knowledge of technical office process standards\nExperience with Systems Engineering tools and techniques, including Requirements Management and MBSE\nProficiency in Microsoft Office tools: Word, PowerPoint, Excel\nGood management skills including task management and delegation\nEffective team-working abilities\nExperience in a multi-disciplined development environment\nWillingness to travel overseas and familiarity with MoD/DoD organisations\n\nSkills & experience required\n\nStrong Systems Engineering background across full lifecycle (concept → qualification → implementation)\nProven experience with MBSE and requirements management\nComfortable running/facilitating design reviews and formal requirements reviews\nExperience in multi-disciplinary engineering environments\nAwareness of security implications of technical material\nStrong stakeholder management and communication skills\n\nDesirable / nice to have\n\nCameo Systems Modeller (Dassault Systèmes)\nSysML\nSimulation & stimulation exposure\nTeamcenter (PLM) / SAP (ERP) awareness\nJira task management\nKnowledge of MoD/DoD organisations / direct customer & supplier liaison\n\nQualifications:\n\nA degree in a relevant Engineering discipline with significant Systems Engineering experience\nMeeting the requirements for registration as an incorporated or chartered engineer, preferably a member of a relevant professional body\nIf you are a skilled Senior Systems Engineer looking for a new contract opportunity within a prestigious Defence & Security environment, we would love to hear from you. Apply now to join our client's dynamic team in Barrow or Sheffield

Control Systems Proposals Engineer \nSheffield (Hybrid)\n\nAre you an engineer who enjoys shaping solutions as well as designing them?\nDo you have experience putting together bids or tender submissions?\nWould you like a role where you can influence projects from the very start?\n\nWhat's in it for you\n·Salary up to £45,000 depending on experience \n·25 days holiday + bank holidays, with option to buy/sell up to 5 days \n·Flexible start and finish times, including flexi-Fridays \n·Private medical insurance \n·Life assurance and pension \n·Payment of professional memberships \n·Employee assistance programme and GP access \n·Enhanced family-friendly policies \n\nWhat will you be doing?\n·Preparing high-quality technical and commercial proposals \n·Developing conceptual designs across control systems, PLC/SCADA and infrastructure \n·Producing clear tender documentation including scope, risks and delivery plans \n·Creating cost estimates for materials and engineering hours \n·Working closely with sales, engineering and supply chain teams \n·Supporting tender reviews and risk assessments \n·Managing multiple bids and tracking progress \n\nWhere you'll be doing it\nYou'll be joining an established engineering group with over 50 years' experience delivering digital and control system solutions across energy, nuclear and industrial sectors. The business operates globally and focuses on improving safety, efficiency and sustainability through technology.\n\nWhat you'll need\n·Background in electrical, control, automation or safety systems engineering \n·Understanding of the full project lifecycle \n·Knowledge of functional safety (SIL, ESD, F&G systems) \n·Ability to interpret technical specifications and define scope \n·Experience with PLCs, control systems and system architecture \n·Strong technical writing and attention to detail \n·Commercial awareness and ability to identify risks and assumptions \n·Degree/HND or equivalent in a relevant discipline \n\nWe appreciate your CV may not be up to date. No problem, just apply and we can deal with that later.\n\nImportant Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

About Plessey We’re building the hardware foundation for next-era computing. Plessey is a world-leading technology company driving the next generation of photonic devices and systems. With over 70 years of innovation, we combine research, materials science, process engineering, and manufacturing under one roof. We’re recognised as a global authority in microLED displays, optical computing, and optical interconnects. Join us to work on breakthrough technologies shaping the future of light-based technology and computing. Our values Lead We don’t follow industry trends; we create them, pushing boundaries and setting standards others aspire to. Every team member has the power to make decisions, drive change, and deliver excellence. We support each other, challenge one another for the best solutions, and lead by example. Together, we build industries and technologies that shape the future and scale toward our vision of the next era of computing. Grow We expand our capabilities every day — deepening our expertise, improving how we work, and pushing the boundaries of what’s possible. Curiosity fuels us: we question assumptions, explore new ideas, and innovate with light-based technologies. By investing in and empowering our people, we strengthen Plessey’s impact and help shape the future of optical technology. Trust We operate like a family—honest, reliable, and supportive. We have each other’s backs, own our actions, and uphold the highest standards of integrity and safety. We trust each other to deliver, our customers to challenge us, and our expertise to guide the way. Together, trust enables the collaboration essential for breakthrough innovation and lasting impact. Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role The Thin Film Ellipsometry Process Engineer is responsible for developing, optimising, and controlling thin-film optical measurement and characterisation processes to support high-yield, high-performance semiconductor device fabrication. This role focuses on ellipsometry-based metrology for deposited thin films across development and production environments. Key Responsibilities • Develop, qualify, and optimise ellipsometry measurement processes for thin films (thickness, refractive index n/k, composition, and uniformity)., • Support R&D and new materials development by providing accurate thin-film characterisation, measurement development, and data analysis., • Own and maintain ellipsometry process recipes, optical models, and control strategies., • Provide accurate metrology feedback to thin-film deposition processes (e.g., PVD, CVD, ALD)., • Analyse film properties including thickness mapping, optical constants, and process-induced variation., • Develop and refine optical models for multilayer thin-film stacks., • Utilise statistical process control (SPC) to monitor tool performance and process stability., • Conduct root cause analysis for measurement drift, model instability, or yield excursions related to film properties., • Collaborate with equipment and process engineering teams to maintain and improve metrology tool performance., • Support new product introduction (NPI) through film characterisation, DOE planning, and process transfer., • Generate technical reports and present findings to engineering and management teams., • Ensure compliance with safety and cleanroom protocols. Skills, Knowledge and Expertise • Bachelor’s or Master’s degree in Materials Science, Physics, Electrical Engineering, or related field., • 3–7+ years of experience in semiconductor or advanced thin-film processing environments., • Strong hands-on experience with spectroscopic ellipsometry., • Solid understanding of thin-film optics, dispersion modelling, and multilayer analysis., • Experience correlating ellipsometry data with complementary techniques (e.g., XRD, AFM, profilometry)., • Strong data analysis and problem-solving skills., • Strong ownership mentality with the ability to work independently in a fast-paced environment., • Adaptable and comfortable with evolving priorities and rapid change., • Excellent cross-functional collaboration skills (working effectively with process, equipment, R&D, and manufacturing teams)., • Clear and confident communicator, able to present technical findings to both technical and non-technical audiences., • Experience with compound semiconductor or dielectric thin films would be an advantage.

FuzeHR is now hiring a Service Technician/Service Engineer based in the UK! This is an exciting opportunity to join a highly successful business in the mining/mineral processing equipment space. The successful Service Engineer will provide post sales service, commissioning, and client support for company supplied equipment in domestic and international locations. No need to report into an office or shop daily, this is a fully remote opportunity involving work on customer sites & from home. Apply today! What are the Perks? • Competitive compensation (dependent on experience and qualifications)!, • M-F, day shift schedule with minimal requirement to work evening or weekends, • Work from home while not servicing customer equipment! What are the Responsibilities? • Post-sales support, including client follow-up and training, • Identify issues in the field and resolve them; look for areas of improvement; bring forward ideas or solutions, • Write service reports and commissioning checklists upon trip completion, • Create procedures, instructions, reports, training information which may include manuals, PowerPoint, and videos, • Act as a content expert for Technical Writing department; support their development of manuals, procedures and documentation, • Follow-up on action items identified during commissioning or service trips, • Assist with Falcon SB bowl refurbishment program; generate reports for the Parts Team, help coordinate and support work processes, • Assist with larger projects including assembly, teardown and coordination; lead and direct a third party vendor to fabricate and assemble company equipment, • Assist with shop assembly when resources require it; this may be in Perth, Langley, Montreal, or at an international vendor, • Assist QA department with quality inspections, • Handle warranty claims; disposition and needed actions to see process to completion using new procedures, • Test company equipment after assembly; follow FAT (factory acceptance test) steps; bring forward any concerns and ensure corrections, • Assist with spare parts orders (packing, picking, communication with Langley, etc.); aid with annual inventory count; aid other company departments (Quality, Procurement, etc.) if local support is required What are the Requirements? • Good mechanical knowledge or mechanical aptitude; follows company and client safety protocols; best practices; follows procedures; ability to follow directions; continued growth and development, • Experience with equipment commissioning and service, • Experience with analysing and troubleshooting machinery both mechanically and electrically (Low Voltage), • Able to read, follow, and understand mechanical (assembly) and electrical drawings, • Clear communication with clients and peers on equipment installation, operation, maintenance, and repair, • Understand how to see a job through and adjust your schedule to suit the task at hand, • Demonstrates personal leadership; looks to develop and stays up to date with required training including but not limited to White Card, Senior first aid, HSR, electrical safety, mineral processing, automation, • Use and understand various Automation software; be able to clearly understand directions if being instructed on a program change, • Proficient in MS Word, Excel, PowerPoint and Adobe Acrobat or other PDF editors, • Able and willing to travel domestically and internationally on short notice and up to 50% of the time. Destinations may be underdeveloped, • Hold a valid Australian passport and maintain good standing, • When working onsite, able to match client hours which may require working 10-12 hour shifts, • Flexible with work/personal life balance to communicate with Langley head office at inconvenient times due to the time difference Bonus Points • Millwright (apprentice program), • Electrician (apprentice program), • Mineral Processing or mine experience, • Multiple languages Personal Attributes • Self-starter, proactive and motivated, • Ability to deliver under pressure or in uncomfortable conditions, • Dependable, trustworthy, accountable; owns mistakes and learns from them, • Works well both independently and with others in a team, • Able to accept and grow from constructive criticism, • Well organized and able to prioritize activities, • Confident in making decisions, some of which may not be well received; diplomatic approach to ensure work gets done, • Ability to recognize when to ask for help, • Flexible to work in a small/medium-sized business

About Plessey We’re building the hardware foundation for next-era computing. Plessey is a world-leading technology company driving the next generation of photonic devices and systems. With over 70 years of innovation, we combine research, materials science, process engineering, and manufacturing under one roof. We’re recognised as a global authority in microLED displays, optical computing, and optical interconnects. Join us to work on breakthrough technologies shaping the future of light-based technology and computing. Lead We don’t follow industry trends; we create them, pushing boundaries and setting standards others aspire to. Every team member has the power to make decisions, drive change, and deliver excellence. We support each other, challenge one another for the best solutions, and lead by example. Together, we build industries and technologies that shape the future and scale toward our vision of the next era of computing. Grow We expand our capabilities every day — deepening our expertise, improving how we work, and pushing the boundaries of what’s possible. Curiosity fuels us: we question assumptions, explore new ideas, and innovate with light-based technologies. By investing in and empowering our people, we strengthen Plessey’s impact and help shape the future of optical technology. Trust We operate like a family—honest, reliable, and supportive. We have each other’s backs, own our actions, and uphold the highest standards of integrity and safety. We trust each other to deliver, our customers to challenge us, and our expertise to guide the way. Together, trust enables the collaboration essential for breakthrough innovation and lasting impact. Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role We are seeking a senior Embedded Software Engineer to join the Product Development team and contribute to embedded firmware development and hardware–software integration. This is a hands-on role, working closely with the Principal Engineer and Senior Hardware Engineer to translate system architecture into reliable embedded implementations across prototypes, demos, and product platforms. Key Responsibilities • Design, implement, and maintain embedded firmware in C/C++., • Develop and maintain low-level drivers and application firmware., • Support bootloader development and firmware update functionality., • Implement firmware robustness, error handling, and recovery paths., • Support firmware bring-up on new hardware., • Debug hardware/firmware issues involving power, clocks, interfaces, and timing., • Work with schematics, PCBs, and lab equipment during development and debugging., • Support validation and test readiness of embedded systems., • Translate architectural intent into working embedded implementations., • Take ownership of defined subsystems with appropriate guidance., • Contribute to technical documentation and knowledge transfer., • Support integration with test environments and higher-level software systems. Skills, Knowledge and Expertise • Background in Electronic Engineering or similar discipline., • Experience in embedded software development (C/C++)., • Experience with microcontrollers (e.g. STM32 or similar)., • Experience with bare-metal and/or RTOS-based systems., • Comfortable reading schematics and understanding hardware design., • Experience with board bring-up and low-level debugging., • Experience using SWD/JTAG, logic analysers, and oscilloscopes., • Understanding of common interfaces (USB, SPI, I²C/I3C, UART). Advantage • USB device development experience., • Familiarity with embedded Linux or Zephyr., • Experience supporting prototype, demo, or pre-production systems.

Group Functional Safety Specialist (Process Safety) UK – Fully Remote + Global Travel I am currently supporting a major international manufacturing business with the search for a senior Functional Safety specialist to join their central Process Safety function. This is not a standard project-based Functional Safety Engineer role. The position sits at group level, supporting multiple international operating sites across Europe, Asia and the US, with a strong focus on live plant environments, operational assurance, and improving functional safety performance across the business. The role requires someone who can operate both strategically and technically, helping shape functional safety standards and governance across the group, while still remaining hands-on across the full IEC 61511 lifecycle. Key areas include: • Leading and facilitating LOPA and SIL Assessments, • SIS / SIF design support and design verification, • Functional Safety Assessments (FSA), • Supporting live operating sites with safety-critical systems, • Driving functional safety improvements across global manufacturing assets, • Working closely with site engineering, operations and EHS leadership teams, • Training, auditing and process safety incident support where required The key requirement is strong owner-operator experience within high-hazard operating environments. This role is much more focused on operational functional safety and accountability for live assets, rather than purely consultancy, design house or project-led exposure. Ideal backgrounds could include chemicals, petrochemicals, refining, oil & gas, COMAH sites, or other major process manufacturing environments. Recognised Functional Safety qualification required (TÜV, CFSE or equivalent). The role is fully remote within the UK, with significant international travel expected (typically 50–60%). If this sounds relevant, feel free to message me directly for a confidential discussion.

Aveni is redefining how financial institutions use AI. We build real, production-ready agentic systems that reshape how banks, advisers and financial services firms operate, replacing fragmented processes with intelligent, end-to-end workflows. We have been recognised as Fintech of the Year for two consecutive years and awarded Best Specialist Technology Service at the Professional Adviser Awards 2025. Backed by leading investors including Puma Private Equity, and commercially supported by Lloyds Banking Group and Nationwide Building Society, we previously completed one of Scotland’s largest Series A rounds. Since then, we’ve continued to grow rapidly as adoption of AI in financial services accelerates, and we’re now scaling our team to meet that demand. The Role We're hiring an Engineering Manager to lead and grow one of our engineering teams. This is a people first role for someone who is genuinely excited about the craft of leadership. You will own the performance, growth, and culture of your team, working closely with Product and Lead Engineer to create an environment of genuine ownership and high autonomy. This role requires a strong engineering background, not to own the technical direction, but to earn credibility, ask the right questions, and know when to step in. What You’ll Be Doing • Own performance, development, and progression of your team, • Own the individual performance and development of your direct reports, setting a high bar, giving honest feedback, and creating conditions for engineers to grow into real ownership., • Build a self-organised team, initially playing a facilitating role in ceremonies, with the explicit goal of no longer being needed to run the process., • Partner with Product on roadmap planning, making sure engineers understand the context behind the work, not just the tickets in front of them., • Own your team's delivery, keeping engineers unblocked, priorities clear, and commitments met., • Spot patterns in how your team operates, design better ways of working, and build the automation that powers those improvements., • Stay close enough to the codebase to spot friction, improve developer tooling, and engage credibly in technical discussions, without stepping onto the critical path., • Drive hiring alongside our Recruitment team, contributing to interview process design, and a high-quality candidate experience., • Set the cultural expectation around AI coding tools, building team-wide norms for responsible, high-quality AI-assisted engineering. What We’re Looking For • Extensive experience in software engineering, with genuine hands-on technical experience. You know what good code looks like and can get into the details when it matters., • Proven experience as an Engineering Manager or Team Lead, with real ownership of individual performance and team culture., • A track record of building high-trust, high-autonomy teams, not teams that work because of you, but teams that work because of the environment you built., • Good understanding of Node.js or Python, and React. Enough to have credible technical conversations, review code, and debug issues alongside your team., • Experience with Agile/Scrum, and a track record of improving how teams deliver, not just following a process., • Genuine excitement about AI coding tools. You use them yourself, you help your team use them well, and you stay current on what's emerging., • You enjoy management and leadership problems. Growing and unblocking people, building the processes and frameworks that make the team better. These are things you actively want to do. Why Aveni • We're building AI systems for a sector where trust and safety genuinely matter and we take that seriously in how we engineer., • High-trust, high-autonomy culture: we give engineers real ownership and expect them to use it., • AI-native engineering culture. We use AI tools across the full software lifecycle and expect our engineering leaders to lead from the front., • High-growth fintech at an exciting moment. New products launching, the team scaling, and the chance to shape how engineering works at Aveni for years to come. Join Us in Making a Difference At Aveni, we believe that diversity drives innovation. We’ve built our business to ensure an inclusive workplace where everyone feels valued and empowered to contribute their best work. If you’re passionate about technology and its ability to drive positive change for the future of financial services, we’d love to hear from you. Even if you don’t meet 100% of requirements, we’d like to hear from you anyway if you believe you’d fit in. Apply now to join us on our mission to transform the financial services industry through AI. Benefits at Aveni. What you’ll love: • We’re a remote-first company across the UK, with regular off-sites and in-person gatherings that are always fun, motivating and team-focused., • Work abroad policy, • Co-working spaces available, • 34 days holiday (including flexible bank holidays) and your birthday off, • Company-wide off-sites, • Optional Personal Development Plan, • Flexible benefits platform, • Protection essentials including Life Insurance, Income Protection, Critical Illness cover, and Pension (up to 5% matched employer contribution with optional increased contributions), • Private health and dental care, • Potential share options, • Enhanced family leave

About the client Our client is a confidential leading international integrated energy company with a strong global project engineering capability, currently driving an ambitious energy transition programme spanning CCS/CCUS, renewables, and hydrogen alongside its traditional oil and gas portfolio. The Basingstoke engineering office is a fully integrated project execution hub delivering multi-discipline engineering across all phases of complex projects worldwide, with a dedicated Subsea Systems department at its core. Project scope The assignment is based within the client's Basingstoke Subsea Systems department, providing Flow Assurance technical leadership across multiple concurrent international oil and gas projects — from feasibility and concept development through FEED, detailed engineering, and handover to operations. The role also extends to CCUS projects, covering CO₂ transportation system assessment and thermo-hydraulic studies specific to CO₂ transport. The Senior Engineer will operate as both a technical lead and a Discipline Project Lead (PDL), accountable for Flow Assurance deliverables across assigned projects and responsible for mentoring junior engineers within the discipline. The client operates a hybrid working policy: up to 12 working days per month from home are available, enabling approximately 60% remote working. Role overview To provide senior Flow Assurance technical leadership across the full project lifecycle — from conceptual studies through FEED, tendering, detailed engineering, and operations support — ensuring technical rigour, cross-discipline integration, and compliance with applicable standards across the client's international oil and gas and CCUS projects. Reporting line: You will report to the Flow Assurance Coordinator and the Chief of Subsea Systems, and work in daily coordination with discipline engineers, interface disciplines (Pipelines/Subsea, Process/Facilities, Operations), contractors, and reservoir and laboratory teams. Key responsibilities Technical delivery • Prepare all Flow Assurance technical documentation across project phases: conceptual study, FEED, tendering, contract package preparation, detailed engineering, and operations, • Review and approve FEED, tender, and detailed engineering deliverables prepared by contractors for the Flow Assurance discipline, • Identify, define, and analyse complex multiphase hydrocarbon transportation schemes, • Assess CO₂ transportation systems, evaluate operating envelopes, and support thermo-hydraulic studies for CCUS projects, • Provide technical support to interface disciplines — Pipelines/Subsea, Process/Facilities, Operations — ensuring integrated solutions across all project phases, • Support operations and troubleshoot start-up and commissioning issues as required Procurement & contractor management • Follow up supplier calls for tender and selection processes: qualifications, clarifications, and technical recommendations for the Flow Assurance discipline, • Manage interfaces with reservoir engineering and laboratory teams throughout the project lifecycle Project leadership & PDL duties • Act as Discipline Project Lead (PDL) on assigned complex projects: perform technical and administrative PDL functions, • Proactively identify and report manhour and schedule variations due to scope changes; escalate to the Flow Assurance Coordinator and Chief of Subsea Systems, • Support the Flow Assurance Coordinator and Chief of Subsea Systems in preparing manhour estimates for new proposals, • Liaise with engineering disciplines throughout the project execution phase; coordinate and manage cross-discipline interfaces Standards, mentoring & continuous improvement • Ensure awareness of and compliance with international standards and codes applicable to Flow Assurance, • Advise on correct interpretation and application of company internal standards and HSEQ policies; develop new standards as required, • Mentor engineers within the Flow Assurance team; contribute to knowledge sharing and continuous improvement across the discipline, • Support technical and safety reviews: HAZOP, HAZID, risk assessments, design and safety reviews Key deliverables • Flow Assurance technical documentation delivered on schedule and to the required quality standard across all assigned project phases, • Contractor and FEED deliverables reviewed and approved within defined timescales, • Manhour estimates and variation forecasts provided accurately and proactively, • PDL functions performed rigorously across assigned complex projects, • Junior engineers mentored with structured guidance and discipline knowledge transfer Requirements Education • Degree in Engineering with graduate-level knowledge of thermodynamics and fluid dynamics — petroleum, chemical, mechanical, or related discipline Experience Must-have: • Extensive experience as a Flow Assurance Engineer across the full project development lifecycle — from concept development through FEED, detailed engineering, and handover to operations, • Proven capability in identifying, defining, and analysing complex multiphase hydrocarbon transportation schemes, • Experience performing technical review of Flow Assurance documentation produced by team members and contractors, • Experience with Technical Audit and Design & Safety Reviews — HAZOP, HAZID, Risk Assessment, • Ability to manage complex and diverse assignments with a high degree of independent technical judgement Nice-to-have: • Operational experience (commissioning, start-up, or production support), • Experience on CCUS projects — CO₂ transportation system assessment and thermo-hydraulic modelling Technical skills • Proficient with Flow Assurance simulation software: OLGA, PVTSim, Multiflash, Pipenet, Pipesim, Hysys, Unisim, • Familiarity with programming languages (Matlab, C++, Python) — an advantage, • Strong understanding of international codes and standards applicable to Flow Assurance and subsea systems, • Knowledge of HSE and technical risk integration into engineering and project solutions Soft skills • Strong technical leadership and engineering judgement — able to operate independently at senior level, • Effective communicator across disciplines, stakeholder levels, and cultures — both laterally and vertically within the organisation, • Collaborative and multidisciplinary approach to project delivery, • Structured task prioritisation and ability to manage concurrent workstreams under pressure, • Fluent English — mandatory

Firmware / FPGA Engineer (OpenCPI Focus) Location: United Kingdom Company: Akkodis Reporting to: Practice Lead Akkodis is a global leader in engineering, technology, and R&D, enabling digital transformation through connected data and advanced engineering expertise. Operating across 30 countries with over 50,000 engineers and digital specialists, we deliver innovative solutions across mobility, software, robotics, simulation, cybersecurity, AI, and data analytics. We are currently seeking a Firmware / FPGA Engineer to join our UK engineering team, supporting the delivery of advanced FPGA-based and software-defined systems for defence and mission-critical applications. This role has a strong focus on OpenCPI-based system development and integration, alongside traditional FPGA and digital design responsibilities. Role Overview You will contribute to the design, development, integration, and verification of FPGA and SoC-based systems within a structured engineering environment. A key aspect of this role is working with OpenCPI (Open Component Portability Infrastructure) to support modular, reusable, and high-performance digital system architectures. You will work closely with systems engineers, embedded software teams, and hardware designers to deliver robust and scalable digital solutions. Key Responsibilities • Deliver firmware and FPGA projects to agreed time, cost, and quality targets, with a strong emphasis on reuse and modular design principles, • Develop and verify RTL designs, including architecture, implementation, simulation, and hardware integration, • Support system-level integration using OpenCPI frameworks and component-based architectures, • Contribute to requirements analysis, design documentation, verification plans, and certification artefacts, • Collaborate across systems, hardware, embedded software, and algorithm teams, • Support process improvement, automation, scripting, and tooling enhancements, • Ensure compliance with relevant safety, security, and quality standards including DO-254, IEC 61508, IEC 62443, and ISO 26262 where applicable Required Experience • Strong experience in RTL design for FPGA-based digital systems using VHDL, • Experience with Xilinx (AMD), Lattice, or similar FPGA/SoC architectures, • Demonstrable experience working with or integrating systems using OpenCPI (or equivalent component-based FPGA middleware frameworks), • FPGA implementation of algorithms developed in MATLAB/Simulink (algorithm development not required), • Strong verification experience using OSVVM, UVVM, or UVM methodologies, • Familiarity with high-speed interfaces such as AXI, PCIe, Ethernet, JESD204, CameraLink, SMPTE, Wishbone, or OCP, • Experience with FPGA development tools such as Vivado, ModelSim, Diamond, Radiant, Vitis, or Propel, • Scripting ability using TCL or similar languages, • Working knowledge of DO-254 development processes, • Experience working within Integrated Project Teams (IPTs) in defence or regulated environments is highly desirable Required Skills • Strong communication skills with the ability to work across multi-disciplinary engineering teams, • Ability to take ownership of technical work packages, • Team leadership or technical leadership experience within small engineering teams is advantageous Education • Degree in Electrical & Electronic Engineering or a closely related discipline

Lead Project Engineer Overview Our client is seeking an experienced Lead Project Engineer to coordinate and manage multi‑discipline engineering activities across large capital infrastructure projects. The role is responsible for driving safe, compliant, and high‑quality engineering delivery from early optioneering and design through to project delivery, in accordance with governance and assurance requirements. This position plays a critical role in ensuring engineering scope is delivered to programme, quality, and safety expectations, while effectively managing technical risk and stakeholder engagement. Role Details • Location: Home based, with occasional site visits for meetings, • Contract Length: 12 months (with potential extension), • Security Clearance: BPSS, • Hours: Full‑time, • Rate: £750 per day (PAYE Umbrella), • Interview Format: Microsoft Teams Key Responsibilities Engineering Leadership & Coordination • Coordinate all engineering inputs and outputs across the project lifecycle, from optioneering and initial design through to delivery., • Chair regular engineering coordination meetings to drive design progress and collaboration between engineering disciplines., • Chair engineering risk meetings to identify, manage, and mitigate engineering, safety, quality, and programme risks., • Drive design maturity and ensure engineering scope is delivered to required quality, safety, and programme milestones., • Ensure compliance with engineering standards, specifications, and policies; where non‑compliance is unavoidable, support the Deviation from Specification process., • Coordinate and lead gated assurance activities, including:, • Site visits, • Senior Reviews, • Operational Engagement, • HAZID, HAZOP, and HAZCON workshops, • Design Authority and Technical Authority Reviews (as required), • Prepare and manage key gate documentation, including:, • Design Management Plan, • Design Risk Management Index (DRMI), • Design Authority Reports, • Manage engineering risk registers and ensure risks are appropriately mitigated or escalated., • Manage design changes in accordance with change control processes, preparing and coordinating all required documentation., • Manage and maintain the Technical Query (TQ) register throughout delivery., • Coordinate contractor engineering deliverables and ensure timely review, technical assurance, and sign‑off., • Coordinate engineering inputs into Works Information (WI) packages., • Work closely with Operations, Asset Management, Project Assurance, Design Authorities, and external contractors to ensure alignment and compliance. Skills and Experience • Proven experience coordinating multi‑discipline engineering teams within large, regulated infrastructure or utility environments, ideally within electricity transmission or distribution., • Demonstrable experience managing engineering inputs through optioneering, concept, early design, and delivery phases., • Strong capability in chairing and facilitating engineering design and risk meetings to drive collaboration and decision‑making., • Significant experience managing engineering and design risk, including HAZID, HAZOP, and HAZCON activities., • Proven ability to drive design maturity and deliver engineering scope to agreed quality, safety, environmental, and programme requirements., • Sound knowledge of engineering standards, policies, and specifications, with experience managing deviations where necessary., • Experience managing design changes and engineering change control processes., • Strong understanding of gated project governance and assurance within large capital projects., • Proven experience preparing and managing Design Management Plans, DRMI, Works Information inputs, and Design Authority Reports., • Confident managing Technical Queries and coordinating timely technical responses during delivery., • Strong stakeholder management and communication skills, with experience engaging senior engineers, operational teams, assurance functions, and contractors., • Ability to make balanced technical judgements and escalate risks and decisions appropriately., • Demonstrable experience supporting Project Assurance Reviews (PAR).

Civil Engineer or Civil Design Engineer Water Sector Flexible location - Birmingham, Glasgow, Chester, Redhill, Swansea, Bradford, Wiltshire, Leeds Contract or staff CIVIL ENGINEER JOB SPEC About the Role Typically, you will organise and/or undertake civil engineering activities within multi-disciplinary teams, whilst potentially supporting and mentoring more junior engineers. The role involves responsibility for: • undertaking strategic studies, feasibility work, outline and detailed designs for a wide variety of water utilities projects including water and wastewater treatment, conveyance and reservoir dam safety,, • producing calculations and reports to support those designs,, • working directly with clients to understand their needs and develop solutions to their problems,, • producing business cases and proposals to enable our clients to fund their projects,, • working with our construction partners to improve safety of designs and understand and improve the construction process,, • ensuring our designs take account of buildability, sustainability, H&S and environmental requirements About You • Approaching or at Chartered or Incorporated Engineer status with the Institution of Civil Engineers or another relevant institution., • Previous experience in the water sector is not essential, we would look for technical skills transferrable to a civil engineering role in the water sector., • Desire to support and mentor more junior engineers towards achieving Chartered or Incorporated Engineer status., • Excellent written and verbal communications skills., • Self-motivated and effective team player. CIVIL DESIGN ENGINEER ROLE Key Responsibilities: • Provide guidance and direction on department design guides, standards, systems and applicable engineering codes and standards., • Preparing calculations and develop civil engineering deliverables (models, drawings and reports) whilst adhering to project budgets, schedules and quality systems., • Providing guidance to others and support continuous improvement, • Coordinate with internal and external team members on complex projects, • Prepare a variety of complex civil engineering deliverables for large or multiple projects., • Develop recommendations for materials and construction techniques., • Develop specifications for the identification, collection and management of data for engineering work., • Serve as a technical specialist and use knowledge and skill set to provide advice and guidance to project teams., • Mentor and develop junior staff, • Be fully conversant and comply with all aspects of health & safety duties of Designers Person Specification: • Civil Engineering Design and/or Hydraulics/Structural background, • Experience in design and build, • Knowledge & Experience in the design and checking of non-infrastructure water/wastewater treatment works design, • Ability to lead and manage a team of civil engineers and associated specialists (structural, geotechnical and hydraulics) and to interface with other disciplines in the production of engineering deliverables

Aqua Consultants is looking for an experienced Senior or Principal Process Engineer to strengthen our growing Water Engineering team. You’ll play a pivotal role delivering water and wastewater schemes for UK water companies, while also supporting wider utilities and infrastructure projects. You will act as a trusted process engineering authority, leading the development of compliant, innovative and sustainable treatment solutions across the project lifecycle. Key responsibilities: • Provide expert process input into water and wastewater design and delivery, • Act as a process subject matter expert and technical leader within Aqua, • Carry out capacity assessments for treatment works and develop process options, • Undertake process calculations, gap analysis and consent compliance assessments, • Develop mass balances, P&IDs, control philosophies and commissioning strategies, • Lead and participate in HAZOP, HAZID and HAZCOM studies, • Assess potable water treatment, raw water deterioration and network risks, • Develop process solutions through outline and detailed design, • Produce high‑quality technical reports and design documentation, • Collaborate closely with costing and commercial teams to develop viable options, • Manage client liaison, progress reporting and technical coordination, • Support project delivery through troubleshooting, commissioning and optimisation, • Promote best practice in process design, safety, operability and environmental performance, • Mentor and develop graduate, consultant and senior engineers, • Attend stakeholder meetings, workshops and site visits across the UK About You: • Accredited degree in Chemical, Environmental or Process Engineering, • Chartered member of a relevant professional institution (essential), • Strong experience within water and/or wastewater treatment, • Confident developing mass balances, optioneering studies and optimisation plans, • Experience working in multi‑disciplinary consultancy teams, • Excellent stakeholder, client and communication skills, • Able to lead technical workstreams and support project delivery, • Practical site experience (sampling/jar testing desirable), • Able to consider carbon, sustainability and environmental impacts, • Comfortable working independently and providing technical leadership, • Full UK driving licence and right to work in the UK What We Offer: • Competitive salary + discretionary bonus, • Company pension & salary sacrifice scheme, • 25 days annual leave + bank holidays + option to buy more, • Company laptop and mobile phone, • Professional membership fees paid, • Ongoing training and clear career progression, • Life assurance (4x salary), • Employee Assistance Programme (GP, physio & mental health support), • Medicash healthcare cash plan, • Enhanced maternity, paternity and adoption pay, • Refer‑a‑friend incentive

Site Engineer – Plymouth Location: Plymouth, Devonport Hours: 42.5 hours per week, Monday to Friday, 07:30 – 17:00 Sector: Defence / Civil Engineering / Infrastructure We are currently recruiting for an experienced Site Engineer to join a major infrastructure scheme based at a secure live MOD facility in Plymouth. This is an excellent opportunity for a Site Engineer with strong setting out, quality and technical compliance experience to support the safe and accurate delivery of complex civil engineering works. Due to the sensitive nature of the site, BPSS security clearance is required. Please note this process can take up to 8 weeks. Eligibility criteria: Candidates must hold a passport from a NATO or MISWG member country and have resided in the UK for the past 5 years. Key Responsibilities As Site Engineer, you will assist in managing technical compliance, quality assurance and engineering delivery across your section of works. Duties will include: • Assisting in the preparation of as-built drawings., • Helping establish effective systems to record completed works and update the Project Quality Plan., • Supporting the development of quality check sheets and carrying out quality checks and surveys., • Assisting with site safety, environmental and quality inspections., • Supporting systems that allow progress to be reviewed against time, quality, dimensions and quantity., • Recording and testing workmanship and materials, including drainage, concrete, piling and brickwork., • Providing engineering support to help overcome technical problems and respond to technical queries., • Setting out works within allowable tolerances from provided site control., • Regularly checking setting out points and benchmarks., • Ensuring setting out instruments and measuring equipment are calibrated, recorded and suitable for use., • Completing daily diaries and keeping project trackers up to date., • Assisting with procurement of site materials and equipment., • Ensuring the workforce understands setting out information and that it is suitable for the works being carried out., • Preparing sketches for site distribution and supporting clear communication across the team., • Supporting implementation of safety, health and environmental management systems., • Maintaining the drawing register. About You The successful candidate will have: • Degree qualification in Civil Engineering or equivalent desirable, such as BSc, BEng, MEng, EngTech, MICE, TIStructE, LCIBSE, LCIBSE EngTech or completion of a Higher Apprenticeship., • Working towards Chartership or Incorporated status with ICE, IStructE or another relevant professional body would be beneficial., • Experience using Leica survey equipment, including GPS, Total Station, optical levels and digital levels., • Strong setting out and survey experience., • Essential experience in reinforced concrete structures using system formwork., • Awareness of commercial processes., • Familiarity with Quality Management Systems., • Experience writing or supporting RAMS., • Proven people and project management skills., • Strong organisational skills and the ability to work as part of a team., • Good IT skills., • Flexibility to work weekends and out of hours on a rota basis, depending on project requirements., • Supervisor HSE test., • CSCS White AQP card. Desirable Experience • Temporary Works Supervisor or Temporary Works Coordinator qualification., • First Aid at Work., • Experience developing ITPs., • SSSTS., • Experience in groundworks, earthworks and reinforced concrete., • Previous experience in nuclear, defence or other highly regulated environments.

BESS Field Service Engineer - Energy Storage (O&M) We’re looking for BESS Field Service Engineers to join one of the UK’s leading BESS O&M providers. This is a field-based role supporting a growing portfolio of BESS assets across the UK, reporting into the O&M Manager. With over 17 projects in the pipeline, this is a long-term, secure platform within a high-growth environment. As a Field Service Engineer, you’ll be responsible for maintaining and optimising BESS assets, ensuring high availability and performance. You’ll carry out planned and reactive maintenance, support commissioning activities and act as a key technical resource across operational sites. BESS Field Service Engineer - Key Responsibilities • Deliver planned preventative and reactive maintenance on BESS assets, • Diagnose and resolve electrical and system faults across HV/LV equipment, • Carry out inspections, testing and annual capacity checks, • Monitor system performance and analyse operational data, • Support firmware and software upgrades across systems, • Identify and implement reliability and performance improvements, • Provide remote diagnostics and phone support where required, • Support commissioning and handover of new BESS sites, • Work closely with internal engineering teams to resolve complex issues, • Operate in line with UK safety standards and site procedures, • Conduct risk assessments and ensure safe systems of work, • Maintain accurate service records, reports and documentation, • Manage spare parts and inventory at site level, • Feed back field issues to support system and process improvements BESS Field Service Engineer - Requirements • Qualification in Electrical or Electro-mechanical Engineering, • Experience in maintenance within power generation, renewables or industrial environments, • Strong fault-finding capability across electrical systems, • Basic IT skills (Excel, Outlook, diagnostics tools, networking fundamentals), • Willingness to travel across UK sites, with occasional overnight stays Desirable: • Experience working on BESS or power electronics (inverters, converters, transformers), • HV/LV authorisation or experience working on high-voltage systems, • Understanding of networking (IP, VLANs, Modbus/TCP), • 18th Edition / BS7671, Test & Inspect (2391) or similar, • HVAC / F-Gas knowledge Why Apply? They can offer you a permanent, secure future with a company due to deliver 15+ projects over the next 5-10 years. They have offices throughout the UK, with great benefits including annual bonus up, private healthcare, life assurance and a competitive base salary dependent on experience. Beyond package, they do a lot socially and it's a tight knit team. Culture is mission driven / hard working. Anyone working here will be at the forefront of the energy transition and making an impact. If this peaks your interest, reach out today to have a confidential discussion and find out more about this opportunity! Submit your CV or contact Holly Higginson () to see if this could be the next step in your career.

Sector: Energy / Infrastructure Employment Type: Contract IR35 Status: Inside IR35 Location Remote working with occasional travel to office locations including: • Manchester, • London, • Newcastle, • Glasgow Duration & Rate • 6-month rolling contract, • Up to £65.00 per hour (Umbrella) Overview We are seeking an experienced Control & Instrumentation (C&I) Engineer with a strong systems engineering background to support major projects across the energy sector. This includes power generation, CCGT, utilities, oil & gas, and process industries. This role is ideal for an engineer who thrives in technically demanding environments and has hands-on experience delivering advanced control system solutions for large-scale energy assets. The successful candidate will bring strong expertise in control system architecture, control philosophy development, and control narrative preparation, alongside experience working with leading Distributed Control Systems (DCS). Key Responsibilities • Develop Control Narratives, Control Philosophy documents, and Functional Logic Specifications for energy-sector automation systems, • Design robust control system network architectures, including Ethernet/IP, Profinet, Modbus, and redundant industrial networks, • Lead or support system configuration, testing (FAT/SAT), commissioning, and operational optimisation activities, • Interface with OEMs, EPC contractors, and multidisciplinary engineering teams on system design, upgrades, migrations, and modernisation projects, • Develop and maintain system backup strategies and cybersecurity policies, ensuring compliance with relevant instrumentation and energy-sector standards, • Produce high-quality technical documentation, engineering reports, and change management records Required Experience & Skills • Proven experience in C&I control systems within power plants, CCGT, utilities, oil & gas, or process industries, • Experience working with a major EPC contractor on complex FEED or detailed design projects, • Strong understanding of P&IDs, Cause & Effect diagrams, and industrial control strategies, • Hands-on knowledge of industrial communication protocols such as Profinet, Modbus TCP/IP, and Ethernet/IP, • Experience with OPC UA for system integration and data exchange, • Familiarity with DCS, ESD, and F&G systems, • Understanding of IEC 62443 cybersecurity principles and their application in critical infrastructure Desirable Experience • Experience with leading DCS platforms such as Emerson Ovation, Emerson DeltaV, or Siemens SPPA-T3000, • Previous involvement in large-scale infrastructure or energy transition programmes Key Competencies • Strong analytical and problem-solving skills, • Ability to work effectively within multidisciplinary engineering teams, • Excellent communication and stakeholder management skills, • High attention to detail and commitment to engineering quality and safety Summary This is an excellent opportunity to contribute to complex, high-value energy projects supporting critical national infrastructure and the ongoing energy transition. The role offers a flexible working arrangement, exposure to leading-edge technologies, and involvement in major engineering programmes across the UK.

Job| Mechanical Design Engineer Company| Global Engineering Solutions Business Tech| Bulk Material Handling Solutions heavy loads Tools |Solidworks, PDM, FEA Development| Various different pathways Location| Hybrid - South Yorkshire Offer| up to £55k + Private Medical + Performance Bonus We are seeking a skilled Mechanical Design Engineer to join a leading engineering specialist that delivers massive-scale mechanical solutions for complex industrial challenges. The company is a powerhouse in the bulk material handling sector, designing and installing robust systems that move the worlds most essential resources. As a Mechanical Design Engineer, you will take ownership of the design process for large-scale mechanical handling projects. You will work on everything from initial concept and structural calculations to detailed 3D modeling and final fabrication drawings. Your designs will be integrated into complex environments where reliability, safety, and durability are paramount. This is a role for an engineer who enjoys "heavy" engineeringthink massive conveyors, loading systems, and automated...

Job Title: Electrical Maintenance Engineer Location: Sheffield Pay Range/details: Competitive Salary Contract Type: Permanent We are currently recruiting for an experienced Electrical Maintenance Engineer to join our client based in Sheffiled. This is a hands-on Electrical Engineer position working a rotating shift pattern by providing engineering support to achieve high levels of plant availability and performance across the Meadowhall, River Don and Provincial Park sites. Key Responsibilities - Electrical Maintenance Engineer Rectify all engineering breakdowns as quickly as possible to minimise downtime Support the introduction and delivery of PPM TPM and Continuous Improvement initiatives across all sites Act with delegated authority of the Engineering Team Leader in their absence and make sound engineering decisions when required Maintain the highest standards of housekeeping and embrace the 5S programme daily Enforce and adhere to the highest standards of Health and Safety at all times Complete all work recording systems accurately with relevant information Carry out thorough shift change and handover procedures with oncoming personnel Support the Site Engineering Manager in reducing machine downtime through autonomous maintenance programmes Complete all plant PPM schedules on time and support site-wide TPM programmes Work effectively as part of a multi-skilled Mechanical and Electrical team Liaise with contractors and carry out cost-effective maintenance and repairs Perform any other ad-hoc duties as required Qualifications & Requirements - Electrical Maintenance Engineer Good academic qualifications i.e. HNC / ONC in Electrical Engineering or equivalent Apprentice trained - 17th Edition Trained (Minimum) with 18th Edition Training advantageous Minimum 3-5 years' experience in an Engineering or Maintenance function Strong PLC knowledge and fault-finding skills Experience in a hot working environment such as steel forging rolling or foundry would be advantageous HV Switching qualification and authorisation would be advantageous Team working skills with the ability to work under pressure and meet deadlines Logical analytical approach with a can-do self-motivated attitude Flexible with strong attention to detail and a continuous improvement mindset What we can offer - Electrical Engineer Average 42 hours per week on a rotating shift pattern (3 on 4 off / 4 on 3 off) Opportunity to work across multiple sites with variety in your role Hands-on involvement in Continuous Improvement and major maintenance projects The chance to take on responsibility and act as deputy for the Engineering Team Leader For more information on this role, please contact Charlie on (phone number removed) or send a copy of your CV to Candidates who are currently an Electrical Engineer, Maintenance Engineer, Shift Engineer, Multi-Skilled Engineer or Senior Electrical Technician may be suitable for this position. For details of other opportunities available within your chosen field please visit our website Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

Production Support Engineer £32,000 - £40,000 + Benefits Days Role Rotherham Area Shillito Group are recruiting for a reputable and well established manufacturing business looking to appoint a Production Support Engineer to support day to day plant operations, maintenance and equipment reliability across a specialist production environment. This is a hands on engineering role working with high temperature process equipment, furnaces, vacuum systems and associated plant machinery. The company are open to speaking with candidates from junior through to more experienced backgrounds, with salary and level depending on experience. The role could suit somebody from a Process Engineering, Furnace Engineering, Maintenance Engineering, Plant Engineering, Thermal Processing, Heat Treatment or heavy industrial manufacturing background. The Role Support the operation and maintenance of production equipment across the plant Assist with fault finding, breakdown response and equipment reliability activities Work on furnaces, vacuum systems, pumps, ducting and associated process equipment Support inspection, refurbishment and rebuild activities Assist with planned maintenance and continuous improvement work Work closely with production and engineering teams to maintain safe and efficient operations Follow HSE procedures, permit systems and safe systems of workWe Are Looking For Practical engineering and mechanical fault finding ability Experience working within manufacturing, process plant or industrial environments Exposure to furnaces, thermal processing, vacuum systems, heat treatment or similar equipment would be advantageous Backgrounds considered could include Process Engineers, Production Engineers, Maintenance Engineers, Mechanical Technicians or Plant Engineers A hands-on approach with a willingness to learn and develop Good attitude towards safety, teamwork and continuous improvementThis is a days based role offering long term stability, training and development within a specialist manufacturing environment. There is a possibility of shift work being implemented in the future. Salary is dependent on experience and can be offered at junior or more experienced engineer level. Shillito Group is a specialist recruitment and executive search partner, working with ambitious businesses to secure high-impact talent across commercial and engineering markets. Our reputation is built on deep expertise, trusted relationships and delivering results that go beyond the brief

Building a sustainable tomorrow Working at BAM means delivering projects that make a difference. From the major infrastructure that keeps society moving, to the social housing, schools, and community spaces that shape daily life. We don’t just talk about social value. We embed it into every build. BAM UK & Ireland is recruiting a Site Manager or Senior Site Manager, to join the Northern construction business. As a Site Manager you will be managing, controlling and supporting the engineering, construction and completion of projects on time and on budget and based on a project in Rotherham. Making Possible Reporting to the Project Manager and becoming an integral member of the construction team you would be expected to demonstrate a clear understanding of the construction management role, management of subcontractors and have a proven track record of exceeding targets and achieving high scores in health and safety, environmental management and Considerate Constructor Scheme. • Management of complex Construction process including knowledge of Mechanical & Electrical installations • Ensure that appropriate quality records are being produced and monitored to verify that the works are produced in accordance with the specification requirements. • Ensure compliance with the Health and Safety Management Plan and BAM Operating Procedures including the Construction Phase Management Plan Able to work to programme and associated deadlines • Set up and monitor handover schedules, keys, spares and completion documentation. • Ensuring BAM construction environmental procedures are implemented on site. • Keep site diaries including records of subcontractor attendance and progress. • Manage direct and sub-contractor packages and the keeping of associated records • Input on buildability issues as required. What’s in it for you? In addition to an attractive salary we offer a significant benefits package which could include; ⦁ Competitive salary ⦁ Company Car or Car allowance ⦁ A wide range of family friendly policies ⦁ 8% matched pension contributions ⦁ Private healthcare ⦁ Life assurance ⦁ 26 days holiday ⦁ 2 wellbeing days ⦁ 1 volunteering day ⦁ Personal and professional development ⦁ Flexible benefit pot What do you bring to the role? • Experience in delivering high quality projects • Broad construction based technical experience. • Experience working on various types of Construction projects. School construction experience would be beneficial although not essential. • A relevant Health & Safety qualification and be competent to carry out site management tasks they are directed to do, ideally SMSTS. • Confident in the use of IT packages and systems. • Self-motivation and ability to work autonomously • Good communication skills • HNC/Degree, MCIOB or equivalent or a trade’s background. • Full driving licence. About BAM Building a sustainable tomorrow. That’s our mission and our promise at BAM. It’s how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. We’re on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. The application process BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at any time you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. "Join us in Making Possible

This is an excellent opportunity to join a growing UK engineering group specialising in high-precision mechanical and hydraulic solutions. The business is expanding with a brand-new, purpose-built workshop in Rotherham, focused on industrial gearbox overhauls and accredited rebuilds. They are seeking an experienced Workshop Engineer to play a key role in the setup and ongoing success of this new facility. Role Overview Carry out full strip-down, inspection, diagnosis, and rebuild of large industrial reduction gearboxes Overhaul hydraulic pumps, motors, engines, and related mechanical components Work on complex, high-value assemblies requiring precision and strong technical knowledge Ensure all rebuild work meets required accreditation and quality standards Support workshop setup, workflow planning, and continuous improvement Contribute to a strong culture of safety, quality, and engineering excellence Requirements Proven experience stripping and rebuilding industrial gearboxes (essential) Strong background in hydraulics including pumps, motors, valves, and related systems Mechanical fitting/workshop engineering experience from industrial, plant, automotive, marine, or similar sectors Ability to work methodically and accurately on complex assemblies Strong work ethic, attention to detail, and good team communication skills Salary and Benefits £40,000 - £45,000 per annum (DOE) 45 hours per week, Monday to Friday 08:00-17:00 Early finish on Fridays (around 16:00) Occasional overtime available but not guaranteed Training provided on specialist gearbox systems Opportunity to work in a new, purpose-built accredited workshop Long-term career stability within an expanding engineering team Ongoing development in a highly technical environmentBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Control Systems Engineer Sheffield We are now seeking a Control Systems Engineer to join our growing engineering team at our brand-new, regional hub in Sheffield. This is a technically focused role, responsible for leading the design, development and commissioning of advanced control and automation systems across a wide range of industries. Key Responsibilities: Contribute to all phases of the project lifecycle with a focus on high‑quality technical delivery. Communicate effectively with customers through meetings, presentations, and technical documentation. Deliver assigned technical tasks and projects in line with budget, quality, safety, and time expectations. Produce and review specifications, design documents, and technical reports. Configure and develop control system application software across multiple platforms and industries. Conduct testing and commissioning safely within operational end‑user environments. Maintain consistently high standards throughout the design and engineering process. Work independently or collaboratively within a team, adapting to various project and customer environments. Ensure full compliance with all requirements of the company’s Integrated Management System (IMS). Skills, Experiences & Qualifications: Highly motivated, ambitious self‑starter with a strong interest in control and automation. Excellent interpersonal, technical, and written communication skills. Experience in designing and developing control solutions within Food, Utilities, FMCG, Process, or Materials Handling industries. Degree in Control, Automation, Electrical Engineering, or equivalent experience. Ideally a member of a relevant engineering or professional body. Minimum of 2 years’ experience within the control and automation industry. Proven control systems engineering experience. Technology Portfolio: PLC Control (Rockwell, Siemens, Mitsubishi, Schneider) HMI & SCADA technologies Regional Systems & Telemetry Data Analysis & Reporting IT & Database technologies MES Industrial Networking Industrial & IT Hardware Operational Technology stack What We Offer Competitive salary 25 days annual leave plus Bank Holidays Enhanced pension contribution Ongoing internal training and Clear career development pathways A supportive employer committed to employee Wellbeing Genuine opportunities for career progression within a growing business Access to employee discount scheme About Us We are MARCH®. The leading provider of critical engineering services. Supporting the industries we all rely on to improve their infrastructure, process, and digital environments. We work together with our customers to maintain business continuity, optimise output, and drive new standards in productivity, reliability, and sustainability. We help deliver operational resilience, increased performance, and better environmental outcomes, across the board. Why March? Progress is People. MARCH has ambitious plans and central to our future growth is attracting, developing and retaining the very best talent. Whether your role is onsite or office-based, engineering or support, we offer opportunities for all our people to develop their careers and maximise their potential. MARCH is committed to building teams that reflect a wide range of backgrounds, perspectives, and experiences. We believe diverse thinking strengthens engineering, and we welcome applications from all backgrounds. If you need any adjustments during the recruitment process, just let the team know

Principal Control Systems Engineer Sheffield - Hybrid Full-time Are you ready to lead complex control systems projects from concept through to delivery? Do you enjoy combining technical leadership with client-facing responsibility? Could this be the step up where your engineering expertise shapes major projects in highly regulated environments? What's in it for you? Fantastic basic salary 25 days annual leave plus 8 bank holidays, plus buy/sell up to 5 days leave per year Hybrid working - 2 days from home per week Flexible start and finish Times - Start between 7-10am and finish between 3-6pm, plus Flexi Fridays Pension contributions are 4.5% employer, subject to a 5% contribution by the employee Employee Health Cash Plan Life assurance What will you be doing? Leading the design, development and integration of advanced control systems Reviewing and approving system architectures, designs and technical specifications Taking ownership of testing, validation and commissioning activities Managing technical delivery across projects, including quality, performance and compliance Working closely with software, hardware, workshop and project teams to deliver successful outcomes Leading technical discussions with clients and project teams to resolve issues Supporting bids and providing technical sign-off during the tendering process Mentoring engineers, developing team capability and providing line management support Managing project resources, budgets, reporting and close-out activities Where you'll be doing it? You'll be joining a long-established engineering business with over 50 years of experience delivering digital transformation and system integration solutions across energy, nuclear and industrial manufacturing. The company works on complex, safety-critical projects and has a strong presence across the UK. What you'll need: At least 7 years' experience in systems engineering, hardware design or electrical design Strong knowledge of control systems and associated software and hardware Experience with tools such as AutoCAD Electrical, SCADA packages, PLC packages and HMI packages Experience applying systems engineering principles and system integration processes Good understanding of project management, including cost control and client management Basic understanding of contractual and commercial requirements Experience of software development and hardware integration Experience working on client sites Strong communication and presentation skills Ability to provide technical input during bids, including estimating time and effort Leadership experience, with the ability to mentor, guide and support engineering teams Experience in highly regulated industries would be useful We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ

Pay up to £92,522, plus 28.97% employer pension contributions, hybrid working, flexible hours, and great work life balance. Are you ready to lead at scale - shaping how complex digital services are built, mentoring engineers and influencing senior leaders across one of the UK's largest technology organisations? As a Lead Software Engineer, you'll join our Engineering community, providing technical leadership across multiple agile teams delivering critical public services. You'll sit at the intersection of deep technical expertise and strategic leadership, helping define engineering direction while remaining close to the realities of delivery. You'll work on high-profile, business-critical services that support millions of citizens every day - from core benefit systems like Universal Credit and Working Age Services, to Digital Payments Services, which process around £230bn in payments annually. This is a rare opportunity to influence how modern software engineering is done at true national scale, within a complex, safety-critical environment where quality, resilience and trust really matter. What skills, knowledge and experience will you need? Experience leading and influencing multiple engineering teams, setting direction and supporting engineers to do their best work Ability to explain complex technical concepts clearly to non-technical stakeholders, including senior leaders, and influence decisions at that level Strong, hands-on knowledge of modern open-source technologies, such as Java, JavaScript and Node.js Deep experience building and running systems in cloud environments (AWS or Azure), including APIs, RESTful services and microservice architectures Strong practical experience using Test-Driven Development (TDD) to build reliable, maintainable software Experience working with SQL and NoSQL databases, such as Postgres, MySQL or MongoDB You and your role As our Lead Software Engineer, you'll provide technical leadership across a portfolio of teams and products, shaping how we design, build, test and run software across DWP Digital. You'll work closely with architects, product managers and delivery leaders to define medium- to long-term strategies for our services, ensuring they are resilient, secure and fit for the future. You'll be working on either: Working Age Services Digital -supporting some of the UK government's most high-profile citizen-facing services, including Universal Credit and the green-field Jobs and Careers Service. Or Digital Payments Services - responsible for payment platforms that support 22 million citizens and handle roughly a third of the UK's BACS traffic. You'll guide teams through complex technical decisions, promote modern engineering practices, and help embed consistent standards across the wider engineering community. While this is a senior leadership role, it remains grounded in real delivery - you'll understand the systems, the trade-offs and the day-to-day challenges facing engineering teams. This role will suit someone who enjoys complexity, cares deeply about quality and engineering excellence, and is motivated by purposeful work. Your decisions will shape how critical public services are delivered, ensuring they remain reliable, scalable and trusted by the people who depend on them. Details. Wages. Perks. Location: You'll join us in one of our brilliant digital hubs in Birmingham, Blackpool, Leeds, Manchester, Newcastle or Sheffield, whichever is most convenient for you. Hybrid Working: We work a hybrid model - you'll spend some time working at home and some time collaborating face to face in a hub. Pay: We offer pay up to £92,522. That's £80,267 salary plus a Digital Allowance of up to £12,255 subject to our assessment of your capability at interview Pension: You'll get a brilliant civil service pension with employer contributions worth 28.97%. Holidays: A generous leave package starting at 26 days rising to 31 days over time. You can also take up to 3 extra days off a month on flexi-time. You'll also get all the usual public holidays. We have a broad benefits package built around your work-life balance which includes: Flexible working including flexible hours and flex-friendly policies Time off volunteering and charitable giving Bring your authentic self to work with 'I Can Be Me in DWP' Discounts and savings on shopping, fun days out and more Interest-free loans to buy a bike or a season ticket, so it's even easier for you to get to work and start making a difference Sports and social activities Professional development, coaching, mentoring and career progression opportunities. And we have an award-winning environment and culture: DWP have been recognised as 2024 Diversity Employer of the Year at the Computing Women in Tech Excellence awards Diverse and Inclusive Leadership at Digital Leaders Awards 2024 Commended as Best Place to Work in Digital category in the Computing Digital Technology Leaders awards 2025 Recognised as one of the Best Public Sector Employers at 2025 Women In Tech Employer Awards Process We know your time is valuable so our application and selection process is just two stages: Apply: complete your application on Civil Service Jobs. There'll be full instructions when you click through. Interview: a single stage interview online. Click APPLY for more information and to start your application. TPBN1_UKTJ

Design and Estimating Engineer Chesterfield Fire Detection, Security and Network Design £Competitive The Role The role of the Design and Estimating Engineer is to design and cost complex fire, life safety, electronic security systems and network infrastructure. You will be responsible for reviewing client/tender specification documents and drawings, liaising with suppliers, using CAD software for the detailed design, costing the projects and drafting proposal documents. You will work collaboratively with various departments, our clients, consultants, suppliers and colleagues, in order to ensure internal & external deadlines are met and that projects are accurately designed & costed. Duties and Responsibilities * Progressing sales enquiries and tenders' requirements by working closely with Business Development Managers to ensure that customer requirements are understood * Designing various life safety and security systems plus any other integrated building systems as specified within the Company's scope of work based upon customer requirements, specifications, drawings, and current standards * Preparing proposals, quotations and tender documents and ensuring they are prepared on time and in line with company standards * Assessing the risk factors influencing the security and fire design, to either enhance accordingly or to communicate back to the client * Ensuring all quotations and system design specifications are compatible with the requirements of all applicable technical and regulatory standards and Codes of Practice * Adhering to all Company policies and procedures * Ensuring handovers and deadlines are achieved * Reviewing changes in customers' specifications and modifying designs accordingly No job description can be entirely comprehensive, and the jobholder will be expected to adapt and carry out such other duties as may be required from time to time, on the understanding that they will be within the individual's remit and capability, and consistent with the status and responsibilities of the role within the business. Person Specification Essential * Good working knowledge of fire, security or network infrastructure products and systems and their features/limitations * Previous design and estimating experience, including the ability to prepare cost sheets and proposal documents * Good verbal and written communication skills * Excellent interpersonal skills * Experience of reading and publishing specifications and technical drawings * Excellent organisational and time management skills * Excellent attention to detail Desirable * Proficient in the use of the latest AutoCAD and/or Revit packages * Current knowledge of technologies, technical and regulatory standards, which are relevant to the design process * Previous installation or commissioning experience within a relevant sector * Knowledge of European regulatory standards * Proficiency in a European language is desirable but not essential We are an equal opportunity employer and value diversity. All employment is decided on the basis of qualifications, merit and business need. Working Conditions The role is based in an open plan office environment with multi-screen computer use. On occasion the role may require support at our other offices and onsite at customers' sites for design meetings. Fore more information on the role please call Giles Churchill at Amida Solutions between 8am to 8pm Weekdays or Weekends

Senior Control Systems Engineer Sheffield We are now seeking a Senior Control Systems Engineer to join our growing engineering team at our brand-new regional hub in Sheffield. This is a technically focused role, responsible for leading the design, development and commissioning of advanced control and automation systems across a wide range of industries. Key Responsibilities: Lead and contribute to all stages of the project lifecycle, ensuring high‑quality technical delivery. Provide technical leadership, mentoring junior engineers and sharing best practices. Build strong client relationships through effective technical communication, presentations and documentation. Take ownership of technical tasks and projects, delivering to budget, quality, safety and programme expectations. Produce and review specifications, design documents and engineering reports. Develop, configure and implement control system application software across multiple platforms. Conduct testing and commissioning activities in live operational environments. Maintain consistently high engineering standards throughout the design and delivery process. Lead or work within multi‑disciplinary teams, adapting to a variety of environments. Ensure compliance with the company’s Integrated Management System. Contribute to continuous improvement and support the development of the wider engineering community. Skills, Experience & Qualifications: Degree‑qualified in control, automation or electrical engineering (or equivalent proven experience). Member of a relevant engineering or professional body (e.g., MIET); Chartered status desirable. Minimum 6 years’ experience within the control and automation industry. Proven track record delivering control solutions within sectors such as Food, Utilities, FMCG, Process or Materials Handling. Strong technical leadership and project engineering experience. Excellent interpersonal, written and verbal communication skills. Highly motivated, ambitious and capable of operating at a senior technical level. Technology Portfolio (Experience Desired): PLC Control Systems (Rockwell, Siemens, Mitsubishi, Schneider) HMI & SCADA technologies Regional control systems & telemetry Data analysis, reporting & IT/database integration MES platforms Industrial networking Industrial & IT hardware Operational Technology systems Functional safety OT cyber security principles What We Offer Competitive salary 25 days annual leave plus Bank Holidays Enhanced pension contribution Ongoing internal training and Clear career development pathways A supportive employer committed to employee Wellbeing Genuine opportunities for career progression within a growing business Access to employee discount schemes About Us We are MARCH®. The leading provider of critical engineering services. Supporting the industries we all rely on to improve their infrastructure, process, and digital environments. We work together with our customers to maintain business continuity, optimise output, and drive new standards in productivity, reliability, and sustainability. We help deliver operational resilience, increased performance, and better environmental outcomes, across the board. Why March? Progress is People. MARCH has ambitious plans and central to our future growth is attracting, developing and retaining the very best talent. Whether your role is onsite or office-based, engineering or support, we offer opportunities for all our people to develop their careers and maximise their potential. MARCH is committed to building teams that reflect a wide range of backgrounds, perspectives, and experiences. We believe diverse thinking strengthens engineering, and we welcome applications from all backgrounds. If you need any adjustments during the recruitment process, just let the team know

REED Engineering & Manufacturing are working with leading Engineering & Manufacturing company The Pyrometry Engineer Lead is the site's technical authority for AMS2750 compliance and all heat-treatment pyrometry activities. This role oversees the Thermocouple Laboratory, manage calibration programmes, and ensure all furnaces and thermal processes meet stringent regulatory and customer standards. Acting as a key partner across Manufacturing, Quality, Maintenance, and Engineering, the role drives furnace performance, product integrity, and continuous improvement across all thermal operations. Key Responsibilities Lead site-wide compliance with AMS2750 and pyrometry standards. Manage the Thermocouple Laboratory, including technicians, processes, and inventory. Govern thermocouple selection, calibration, traceability, and deployment. Direct and approve all TUS, SAT, and furnace calibration activities. Maintain and approve all calibration documentation and certifications. Develop and control pyrometry procedures, quality standards, and technical documentation. Provide expert guidance for furnace troubleshooting, root-cause analysis, and NCRs. Support internal, customer, and third-party audits as the site pyrometry SME. Drive continuous improvement in furnace reliability, process capability, and operational efficiency. Influence long-term thermal processing strategy across cross-functional teams. Promote strong safety, environmental, and quality governance in a heavy-engineering setting. Skills & Experience Expert knowledge of AMS2750, pyrometry, and heat-treatment standards. Strong background in metallurgy and heat-treatment science. Deep understanding of thermocouple technologies and furnace control systems. Skilled communicator able to influence senior stakeholders. Proven capability in structured problem-solving and risk assessment. Strategic thinker with a strong compliance and operational mindset. Essential Skills Strong knowledge of AMS2750 and thermal processing standards Understanding of metallurgy and heat-treatment effects on materials Experience with thermocouples, calibration methods, and temperature-measurement systems Ability to set up temperature-monitoring equipment and collect accurate data Clear communicator able to influence stakeholders and write precise procedures Skilled in risk assessment, root-cause analysis, and problem-solving Quality-focused with a strong compliance mindset Able to work safely and effectively in a heavy-engineering environment TPBN1_UKTJ

MANUFACTURING ENGINEER SHEFFIELD COMPETITIVE SALARY Are you a Manufacturing Engineer with a strong focus on translating design into manufacturable products? In this role, you'll take design drawings and convert them into ERP‑ready parts, accurate bills of materials (BOMs), and robust routings. You'll also be responsible for continuously improving manufacturing processes, driving better performance across cost, quality and delivery performance. THE ROLE: As a Manufacturing Engineer, you will be required to: Review and interpret design drawings, specifications, and standards to define robust manufacturing solutions Create and maintain accurate ERP master data, including parts, BOMs, routings, work centres, labour standards, and routing times Define manufacturing methods, sequences, tooling and work instructions to support efficient, right‑first‑time production Support accurate product costing, capacity planning and productivity improvement through high‑quality manufacturing data and analysis Collaborate with Procurement on make vs. buy decisions, supplier selection, technical clarification and resolution of supply issues Partner with Production, Planning, Quality and Maintenance teams to support smooth product introduction and ongoing manufacture Lead and support continuous improvement initiatives focused on cost reduction, cycle time reduction, waste elimination and process capability Provide day‑to‑day manufacturing support, including non‑conformance investigation, corrective and preventive actions and change control Support Lean Design for Manufacture, challenging designs that impact yield and approving detail part specifications Ensure compliance with quality, health & safety, environmental standards and company policies THE CANDIDATE: The ideal Manufacturing Engineer: Proven experience in a manufacturing or process engineering role within a manufacturing environment Strong ability to interpret engineering drawings and specifications Hands on experience creating and maintaining BOMs and routings in an ERP system Good understanding of manufacturing processes, methods and tooling Strong problem solving and continuous improvement mind set Effective communication skills with the ability to work cross functionally Knowledge of lean manufacturing principles ERP experience Knowledge or experience of working with CAD BENEFITS: Competitive salary + company bonus Tailored training and development, including company‑funded external qualifications where relevant Generous pension scheme with 7% employer contribution Life assurance at 3.5× your salary Employee Assistance Programme for confidential wellbeing support Discounted gym membership - up to 25% off at 4,000+ UK gyms Fuel card savings of 2-3p per litre at 3,500 stations, including BP, Esso and Shell Employee recognition schemes celebrating great work 33 days' holiday per year (inclusive of bank/public holidays) ABOUT PROGRESS RAIL: Progress Rail, a Caterpillar company, is one of the largest integrated and diversified providers of rolling stock and infrastructure solutions and technologies for the global rail industry. The company provides advanced EMD® locomotives, engines, and technologies, railcars, trackwork, fasteners, signalling, rail welding and Kershaw Maintenance-of-Way equipment, along with dedicated locomotive and freight car repair services, aftermarket parts support and recycling operations. Progress Rail's deep industry expertise ensures a commitment to quality through innovative solutions. With a global network across the United States, Canada, Mexico, Brazil, Germany, Italy, Australia, China, Germany, India, South Africa, the United Arab Emirates and the United Kingdom, we are committed to serving our customers. PROGRESS RAIL VALUES: Integrity - the power of honesty Excellence - the power of quality Teamwork - the power of working together Commitment - the power of responsibility Sustainability - the power of endurance EQUAL OPPORTUNITIES: Progress Rail is an equal opportunity employer. All qualified applicants will receive consideration for employment. We value and embrace diversity of thought, background and unique experiences and we pride ourselves on being an inclusive workforce and culture. HOW TO APPLY: To be considered for this role, please click on the link provided. If you would like any further information about this vacancy before applying, please feel free to contact Taher Rahman at our Sandiacre site. We would politely request no agencies please

Maintenance Engineer £35 per hour | Outside IR35 3 shift Pattern 6-2/2/10/10-6 Rotherham gap technical are representing a market-leading heavy manufacturing business seeking an experienced Maintenance Engineer (Electrical Bias) to provide contract maintenance engineering services at their Rotherham site. Scope of Services The successful contractor will provide electrical and multi-skilled maintenance engineering services to support the reliability, availability, and performance of heavy industrial production assets. Services will be delivered using the contractor's own expertise, methods, and judgement to achieve agreed outcomes. There is no obligation to provide continuous work, and services are delivered without employee-style supervision, appraisal, or management. Key Service Deliverables Provision of reactive breakdown support to minimise unplanned downtime across heavy industrial plant Execution of planned and preventative maintenance activities aligned with site maintenance schedules Electrical fault diagnosis using schematics, diagnostics, and asset history Identification and rectification of recurring equipment faults, including implementation of permanent corrective actions Maintenance and optimisation of heavy plant and process equipment, including conveyors, motors, pumps, gearboxes, and drives PLC fault-finding and interrogation to support rapid fault resolution and plant recovery Support for plant reliability and continuous improvement initiatives Collaboration with production, engineering, and safety teams to ensure safe and efficient operation of industrial plant Support for machinery modifications, upgrades, shutdown works, and refurbishment activities All services delivered in compliance with site health, safety, and permit-to-work systemsContractor Profile Time-served engineer or demonstrable equivalent industry experience Strong electrical bias with proven experience in heavy industrial or FMCG `process manufacturing environments Proven capability working with: 3-phase electrical systems Motors, drives, inverters, and safety circuits PLC fault-finding (Siemens, Allen Bradley, or similar) Heavy plant and process equipment Previous experience providing services as a maintenance engineering contractor Able to manage workload and priorities independently, working with minimal direction Strong communication skills when liaising with site stakeholders Availability to support a 4 on 4 off shift pattern, including days and nightsApply To be considered, please submit your CV via the Apply Now option on the website. For further information on this engagement or to discuss other contract opportunities, please get in touch. This contract opportunity is advertised by gap technical, operating as an employment business. Selection is based solely on suitability to provide the services described. Closing Date: 08/05/2026

Control Systems Proposals Engineer Sheffield (Hybrid) Are you an engineer who enjoys shaping solutions as well as designing them? Do you have experience putting together bids or tender submissions? Would you like a role where you can influence projects from the very start? What's in it for you Salary up to £45,000 depending on experience 25 days holiday + bank holidays, with option to buy/sell up to 5 days Flexible start and finish times, including flexi-Fridays Private medical insurance Life assurance and pension Payment of professional memberships Employee assistance programme and GP access Enhanced family-friendly policies What will you be doing? Preparing high-quality technical and commercial proposals Developing conceptual designs across control systems, PLC/SCADA and infrastructure Producing clear tender documentation including scope, risks and delivery plans Creating cost estimates for materials and engineering hours Working closely with sales, engineering and supply chain teams Supporting tender reviews and risk assessments Managing multiple bids and tracking progress Where you'll be doing it You'll be joining an established engineering group with over 50 years' experience delivering digital and control system solutions across energy, nuclear and industrial sectors. The business operates globally and focuses on improving safety, efficiency and sustainability through technology. What you'll need Background in electrical, control, automation or safety systems engineering Understanding of the full project lifecycle Knowledge of functional safety (SIL, ESD, F&G systems) Ability to interpret technical specifications and define scope Experience with PLCs, control systems and system architecture Strong technical writing and attention to detail Commercial awareness and ability to identify risks and assumptions Degree/HND or equivalent in a relevant discipline We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ

The ideal candidate will possess a degree in Chemical Engineering and chartered status, bringing extensive experience in process engineering, particularly within nuclear settings. An international energy consulting firm based in Warrington is seeking a Process Responsible Engineer to ensure technica

Mechanical Field Service Engineers. As Mechanical Field Service Engineer you will be responsible for mechanical maintenance and technical support to the water production team to repair and maintain water assets.

If you are an experienced Service & Repairs Engineer based within the S Postcode area, we want to hear from you! Role: Service & Repairs Engineer (Social Housing) * Location: Sheffield Area * PAYE * Salary: £40,000 - £45,000 basic * Work Schedule: 8:0

This role would suit a Mechanical Engineer, Chemical Engineer, or hands-on technician looking to move into a Fuel Engineer position, with full training provided and excellent opportunities to increase earnings through overtime. Fuel Engineer (Service / Installation). Are you a Mechanical or Chemical

They are recruiting for a Cut to Length Operator also known as a Decoiling Operator, who will be responsible for operating machinery used to process coil products (stainless steel and aluminium) according to customer specifications.

Our client is a well-established and successful manufacturer, they are looking for an experienced Production Operative to join their team.NOTE: This is a temporary contract for 4 months.A permanent role, or extension of the contract is not guaranteed at this time, but may change in the future depend

Ensure all products meet high quality and safety standards.