Offres process safety engineer à St AlbansCréer des alertes d'emploi

Job Role: Mechanical Maintenance Engineer (Steam & HTHW)Location: HMP The Mount- Molyneaux Avenue, Hemel Hempstead HP3 0NZSalary: £44,688.51 to £48,412.56 per annumContract: Full time/PermanentWe are seeking a dedicated Engineer - Mechanical Maintenance Engineer (Steam & HTHW) to join our team at HMP The Mount, a category C & adult/male prison.Join a team that is more than just a group of colleagues - we work Monday-Friday as a supportive and driven family, working together to create a safe and nurturing environment.HMP The Mount runs like a self-contained town, it takes hundreds of people to keep it functioning, and as the Facilities Maintenance Team we are committed and driving the smooth and safe operation, like a heart that pumps blood through the body, everything we do impacts every prisoner, employee, and visitor, and wider to the families and community.As an Engineer - Mech/Steam/HTHW , you will have the opportunity to work alongside experienced and passionate colleagues who vary from Plumbers, Electricians, Carpenters, Painters, to Cleaners, and Administrators, and others, who are all dedicated to making a positive difference, providing a safe and secure environment for all.If you are looking for a role where you can use your skills to create a better future for others, we encourage you to apply for this compelling opportunity and join us in our mission to promote rehabilitation and positive change and be part of a team that truly makes a difference.We are a Ministry of Justice business and provide critical and time-bound services to HMPPS, and are looking for a Engineer - Mech/Steam/HTHW with any combination of:- Two years' experience working in a role as a steam boiler operator or equivalent- Must be familiar with and able to work to Water Supply Regulation and Control of Legionella L8 requirements- Must be familiar with and able to work to BG01 - safe operation of boilers- Experience working on commercial or industrial steam, heating and water systems- Plumber qualified to C&G 6035 (Plumbing), C&G 6189 (Plumbing and heating) and NVQ level 3 in Plumbing or equivalent- BOAS accredited boiler operator course or equivalent- Good Health & Safety knowledge.- Excellent organisational, time management and people skills.If this sounds like you, we would like to hear from you!Explore a varied and rewarding career at GFSLWelcome to careers at Gov Facilities Services Limited (GFSL). Joining us is your chance to help ensure prisons are secure and safe for prisoners and prison staff alike, and to play your part in helping prisoners reintegrate into society.Holidays are 25 days per year plus Bank Holidays, and a range of non-contractual benefits are provided. These range from Death in Service at 4x salary, to access to private GP consultations and an Employee Assistance Programme that offers counselling and information services for preventative care and to help employees in a crisis. There are also a range of financial reward mechanisms and access to retailer discounts.You will find a strong focus on safety, a supportive, inclusive workplace, a competitive benefits package, and real opportunity to build your skills and progress.Explore facilities careers where you can make difference.Pride In PeopleWe're passionate about promoting greater diversity and creating a workplace and culture where all of our employees have a voice that is heard, feel a sense of belonging and are empowered to be their true selves.We recognise the value that every single employee brings to the organisation. Everyone's needs at work are different and we are committed to doing our best to satisfy these differences whilst ensuring consistency and fairness for all. We promise to champion diversity and inclusion with ongoing learning and training, as well as career progression opportunities for everyone.GFSL has been notified by its shareholder (MOJ) that the provision of FM services will in future be delivered by the private sector. This means that following a successful procurement process, GFSL's services will complete transfer to a private sector provider/providers no sooner than August 2027.Pride in People - Do the Right thing - One TeamAn ISO 9001 Certified CompanyTPBN1_UKTJ

An excellent opportunity has arisen for an experienced Plant Service Manager to join a leading national plant hire company. You'll manage a busy workshop, overseeing the servicing, maintenance and repair of a large fleet of construction plant while leading a team of around 25 engineers and workshop staff.The RoleManage the day-to-day running of a busy workshop.Lead and develop a team of approximately 25 engineers and service staff.Ensure servicing, inspections, PDI's and repairs are completed to a high standard.Maximise fleet availability through effective workshop planning.Maintain high Health & Safety and compliance standards.Monitor workshop performance, costs and engineer productivity.Work closely with the Workshop Supervisor to prioritise workloads and improve efficiency.RequirementsPrevious experience as a Plant Service Manager, Workshop Manager or similar.Strong background in plant hire, construction equipment or heavy plant.Experience managing engineering teams.NVQ Level 3 in Plant Maintenance, Land Based Engineering or equivalent.Strong organisational, leadership and communication skills.Package£60,000 - £65,000 basic salary.Company electric vehicle.Monday to Friday, 7:00am - 5:00pm.Company pension.Ongoing training and career progression.Permanent position with a leading national plant hire business.Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.TPBN1_UKTJ

An excellent opportunity has arisen for an experienced Plant Service Manager to join a leading national plant hire company. You'll manage a busy workshop, overseeing the servicing, maintenance and repair of a large fleet of construction plant while leading a team of around 25 engineers and workshop staff. The Role\n\n • Manage the day-to-day running of a busy workshop.\n, • Lead and develop a team of approximately 25 engineers and service staff.\n, • Ensure servicing, inspections, PDI's and repairs are completed to a high standard.\n, • Maximise fleet availability through effective workshop planning.\n, • Maintain high Health & Safety and compliance standards.\n, • Monitor workshop performance, costs and engineer productivity.\n, • Work closely with the Workshop Supervisor to prioritise workloads and improve efficiency.\nRequirements\n\n, • Previous experience as a Plant Service Manager, Workshop Manager or similar.\n, • Strong background in plant hire, construction equipment or heavy plant.\n, • Experience managing engineering teams.\n, • NVQ Level 3 in Plant Maintenance, Land Based Engineering or equivalent.\n, • Strong organisational, leadership and communication skills.\nPackage\n\n, • £60,000 - £65,000 basic salary.\n, • Company electric vehicle.\n, • Monday to Friday, 7:00am - 5:00pm.\n, • Company pension.\n, • Ongoing training and career progression.\n, • Permanent position with a leading national plant hire business.\n\n Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

A really good chance to join an already well established commercial dishwasher and glass washer manufacturer with over 50 years experience as they go through a massive expansion push. Over the next couple of years there will be some amazing changes with them which will see their name be on everyone’s lips for what the they have done, and what they will do. Their engineering team has been very long standing and I can only guess that being looked after and being valued, and being appreciated, and being rewarded has something to do with their low staff turnover. \n \n Due to expansion they are recruiting for a commercial dishwasher engineer, you will be:- \n \n\n • Providing service and maintenance on a wide range of commercial dishwashers, glass washers, warewashing, conveyor machines etc.\n, • Working on all manufacturers equipment\n, • Covering London and the home counties area – 2-3 days in London, the rest being outside\n\n \n Preferred Skills of a commercial dishwasher engineer \n \n\n • Living anywhere in or around the London or M25 area or home counties area ideally but anywhere in the south east of England would be considered\n, • Experience needed on commercial dishwashers and / glass washers – are you a COMCAT engineer who is sick of working on ovens in this weather?\n, • The company may also look at a commercial laundry engineer who does a bit of work on washers\n, • The company may also consider a time served white goods engineer who wants to move into more commercial equipment\n, • Basic electrical safety course needed\n\n \n Benefits and salary of a commercial dishwasher engineer \n \n\n • 35-38k basic depending on experience on commercial dishwashers, glass washers or warewashing\n, • Door to door travel pay\n, • Van, phone, company pension\n, • 23 days holiday + bank holidays\n, • overtime available and call out weekend rota\n, • Further and continuous training if required\n\n \n \n For an immediate interview contact Adam Southam \n \n \n \n In the event that you are contacted for a role, please note that as part of the registration process you shall be required to provide FRONTrunner Recruitment Ltd. with proof of identity as well as proof of eligibility to work in the United Kingdom.

Chief C&I Engineer - Energy from Waste Fleet Excellent salary + car allowance + bonus + benefits National role - covering all UK sites SCINERGY Recruitment are working with a leading Energy from Waste operator to recruit a Chief C&I Engineer to support the existing site teams across its national fleet of Energy from Waste plants. Working closely with the Central Engineering Team, you will act as the fleet-wide subject matter expert for DCS, functional safety systems, PLCs and cyber security - setting standards, driving best practice and improving the safety, reliability and standardisation of C&I assets across all UK sites. The role will involve: • Providing expert C&I engineering and technical support across the EFW fleet, • Setting fleet-wide standards for planned and unplanned maintenance of C&I systems, • Acting as SME for DCS, PLC, SCADA, field instrumentation, CEMS, ATEX, functional safety and industrial control system cyber security, • Developing engineering maintenance instructions, specifications, philosophies and technical documentation, • Supporting control-system logic, configuration, graphics, I/O and interface management, • Managing national contracts covering DCS, failsafe, PLC, cyber security and other control applications, • Driving standardised C&I maintenance, reporting and work close-out through the CMMS, • Supporting outages, commissioning, MCR upgrades, system integration and plant breakdowns, • Conducting plant inspections, audits and root-cause analysis to improve reliability and reduce HS&E risk, • Working closely with site teams, the Central Engineering Team, OEMs and contractors while supporting staff development To be considered for this role, you should have: • A BEng (Hons), equivalent engineering degree or appropriate technical qualification, • Extensive C&I engineering experience within Energy from Waste, power generation or a similar process industry, • Strong knowledge of DCS, PLC and SCADA systems, together with industrial instrumentation, • Knowledge of control valves, calibration, metrology and proof-testing requirements, • A recognised specialism in cyber security and/or functional safety, with knowledge of the IEC 61511 functional safety lifecycle, • Experience using CMMS systems to support maintenance standards and asset performance, • Strong problem-solving, root-cause analysis, change-management and communication skills, • A sound understanding of health, safety and environmental requirements and safe systems of work, • A full UK driving licence and flexibility to travel and support occasional out-of-hours work What's on offer: • Excellent salary dependent on experience, • Car allowance, • Performance-related bonus, • Company pension, • Private medical cover, • An influential engineering role supporting a national EFW fleet, • Ongoing training and professional development For further information or to apply please contact Steve at SCINERGY Recruitment on 02030 386 115 or email JBRP1_UKTJ

Your role at a glance As the Critical Facilities Maintenance (CFM) Lead Engineer, you will be reporting directly to the Critical Facilities Maintenance Manager, responsible for the shift patterns delivery of Facility Management (FM) services to NTT Global Data Centers, ensuring operational performance and efficiency is always maintained to the highest possible standards. Provide engineering support and guidance in general on property matters affecting the on-going management and development of NTT Global Data Centers. You will be responsible for the management of the shift engineers, including but not limited to ensuring training matrix are up to date, ensure that all planned absences are covered, and scenario drills are completed. You will provide technical support and leadership across the shift including first line response to any incidents that arise. Working with other shift leads, all handovers will be completed and documented using the agreed process. You will provide engineering services and guidance on facility matters affecting the day-to-day management and development of the critical and non-critical infrastructure. Plan, manage and implement the delivery of FM services to the data centers ensuring optimal operational performance, and that compliance is always maintained to the highest possible standard. Provide engineering services and guidance in general on matters affecting the on-going management and development of the data centers. What will you do? Maintain and supervise the site shift engineering team Work closely with the Critical Facilities Maintenance Manager and maintain responsibility for ensuring services are delivered in accordance with best practice processes and procedures Manage the Salesforce/MCIM and system and ticketing queues Ensure there is continuous development of the sites Emergency Operations Procedures and Standard Operations Procedures Promote Critical Engineering Best Practice and promote high standards of Health and Safety Support the shift engineering teams to ensure correct operation of the critical services of the Datacenters Maintain a proactive involvement in the on-going technical evaluation of all plant and equipment, and provide suggestions of improvements where appropriate Ensure site logbook systems are current and correct and maintained in accordance with the respective compliance From time to time be prepared to work unsociable hours during critical maintenance windows or unforeseen maintenances Perform any other reasonable duty or request as deemed appropriate by Management What are we looking for? Essential Experience in facilities, operations or engineering; in a Data Center critical environment 18th Edition certified (or comparable) electrical qualification, ideally electrical test & inspection LV Switching experience (HV an advantage) Demonstrable experience in operating and fault finding complex and integrated M&E systems including (Transformers, LV, Generators, UPS, Electrical distribution, BMS, Air Conditioning, Fire suppression systems) Working knowledge and understanding of engineering operations within Mission Critical Environments Creating and developing SOP and EOP documentation and other related/similar processes Excellent organizational skills with the ability to prioritize Good numerical and literacy skills and high levels of computer literacy Self-motivated and keen to develop, with a willingness and desire to learn Ability to present complex technical problems and resolution options in a clear well thought out easy to understand way Excellent attention to detail The ability to communicate effectively at all levels with good relationship building skills To possess initiative with an inquisitive nature, unafraid to ask appropriate questions To undergo full security checks to BS7858:2019 standard Desirable HND or similar in relevant area (Mechanical, Electrical, Building Services) Comprehensive mechanical engineering understanding LV/ HV Authorized Person IOSH Working Safely L8 Legionella Management Who we are As the third largest data center provider, we operate over 150 data centers in more than 20 countries and regions. We understand that every business large and small has its own unique needs and goals. We offer local-to-global data center expertise, aligned with our connected platform of AI-ready data centers to create solutions that enable our clients to seamlessly scale their digital businesses, anywhere and anytime. TPBN1_UKTJ

Anord Mardix, a Flex company, is a global leader in critical power solutions. With facilities around the globe, Anord Mardix leads in critical power infrastructure, supporting a myriad of industries, from financial institutions to data centers. We develop skill sets, encourage curiosity, and enable empowerment we turn jobs into careers. If this sounds interesting, wed like to meet you. Job Summary Anord Mardix, a Flex company, are a global group that manufactures switchgear and associated products for installation in mission-critical and live commercial buildings ranging from data centres to the international headquarters of some of the worlds largest companies. We are seeking a skilled and motivated new Field Support Engineer (UK remote) employee to join our team. Summary: The ideal candidate will be responsible for servicing, maintaining, and troubleshooting power management systems (PMS), including PLC, HMI, SCADA, PME, and associated networks, in various field locations in UK & Europe. This role requires travel within the UK & Europe, strong technical expertise, and excellent customer service skills. Training and shadowing of experienced PMS engineers will be provided where required to ensure you have the necessary skills and knowledge to excel in your role. Additionally, the candidate must be available for PMS emergency call-out cover as needed. What a typical day looks like: Develop, service, maintain, and troubleshoot PMS (Power Management Systems) systems (PLC, SCADA, HMI, PME and networks) across client sites. Provide on-site technical support, diagnosing faults and resolving hardware/software issues quickly. Support installation and commissioning of PMS systems, including testing and ensuring correct operation. Deliver customer training and maintain strong client relationships through good service. Produce clear service documentation and report activities back to internal teams. Participate in emergency call-out rota (approx. 1 in 8 weeks) and respond to urgent issues. Comply with health, safety, and company procedures during all field work. Travel sometimes across the UK & Europe in a field-based engineering role. The experience were looking to add to our team: Bachelors degree/HNC/ONC or related qualification in Electrical Engineering, Electronics Engineering Minimum of 3 years of experience in servicing and maintaining power management systems, including PLC, SCADA, PME, and networks. Proven track record in a similar field-based engineering role with strong understanding of power management systems, including hardware and software components. Proficiency in using diagnostic tools and software for troubleshooting PLC, SCADA, PME, and network systems. Familiarity with industry standards and regulations related to power management. Excellent problem-solving, analytical and interpersonal skills. Ability to work independently and manage time effectively. Valid drivers license and ability to operate field service vehicles. Eligibility to work in the UK What youll receive for the great work you provide: An environment where you will feel fulfilled by your work, valued for your contribution, and celebrated for your success; Opportunities to learn new skills in a fast-paced industry; A competitive salary and benefits package that includes: o A merit-based annual pay review o Enhanced annual leave o Employee recognition scheme and long service awards o Referral bonus o Volunteer days o Group Life Insurance, including a death in service payment and access to a virtual GP service 24/7 365 days a year o Sick pay scheme o Cycle to Work scheme o Enhanced maternity/paternity leave Flexible/Remote/HybridWork based on your Job Function; Travel opportunities (role dependent); Support in your well-being by access to: o Employee Assistance Programme offering free access to qualified counsellors and expert advice o On-site trained Mental Health First Aiders Access to various discount programs (including food, activities, gym memberships etc.) TK43 Job Category Production Engineering Anord Mardix is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Anord Mardix, you must complete the application process first). TPBN1_UKTJ

Lead Design Quality Engineer Pitstone, Hertfordshire Inside IR35 12 months You will ensure that engineering designs meet safety, regulatory (EASA, CAA) and customer requirements before production commences focusing on risk mitigation and process compliance and engages effectively with all involved regulatory bodies. Lead engineer is a senior role responsible for planning and delivery of design assurance oversight in line with Part 21J airworthiness requirements and Design Organization Handbook (DOH) requirements applicable to the customer products, responsible for achieving 100% compliance with airworthiness. You will engage with heads of production, engineering, configuration and support functions defining strategy for defect prevention, root cause analysis and continuous improvement across the full product development lifecycle. Principal accountabilities • Strategy definition and KPI reporting for all the customers on shared product platform., • Plan created to measure how design change and technical documentation for product continued airworthiness meet EASA/ CAA Part 21J airworthiness and customer requirements and communicate KPI., • Leading design reviews PDR/ CDR and all stages of DEV program to integrate quality, safety and producibility into initial design and decide additional resource where required., • Leading Technical documentation reviewed and validated to confirm design performance., • Leading and facilitating root cause corrective actions (RCCA), failure reporting and corrective actions (FRACA) analysis & practical problem-solving activities with corrective action sustainment monitoring in place to prevent in service failures., • Strategy for APQP tools deployed for NPI created and deployed., • Leading DFMEA/ PFMEA, Quality champion during DEV process stages for FMEA update., • Customer, EASA, CAA, ISO9001 and AS9100 requirements and audits supported with NCR closeout oversight and follow on sessions implemented., • Audit design methodologies and software tools to ensure conformity to AS9100. Requirements • Bachelor's degree in aerospace, science, or engineering highly desirable., • Min 5 years' experience in aerospace industry or equivalent at engineering, design & development, or quality positions., • Proficiency in ISO9001, AS9100 QMS standards deployment and implementation., • Previous experience working with EASA/ CAA part 21J., • Experience in internal and external audit and auditing techniques, lead auditor trained preferred., • APQP Specialist with demonstrated proficiency in PPAP, FMEA and MSA., • Problem solving proficient.8D, RCCA, FRACA with Six Sigma DMAIC Black Belt being desired., • Configuration and data management experience., • Ability to interpret and explain engineering drawings, CAD models and technical specifications. To apply send your CV to Stella today! JBRP1_UKTJ

Customer Quality Assurance Engineer 12 months Pitstone, Hertfordshire Rate: £40-45 per hour inside IR35 The Customer Quality Assurance Engineer is a specialised role created to function as a link between the businesses program and manufacturing functions and the customer, making sure engineering design and production standards meet safety, regulatory (EASA, CAA) and customer requirements focusing on risk mitigation and process compliance. The Engineer is responsible for handling customer non-conformances and acting as a primary quality liaison between the business and customer supporting design assurance oversight in line with Part 21J and production oversight in line with Part 21G airworthiness requirements. You will champion contacts with the customer, production, engineering, configuration and support functions focusing on defect prevention, root cause analysis and continuous improvement using APQP tools as PPAP, FMEA, MSA and SPC. Principal accountabilities • Customer, EASA, CAA, ISO9001 and AS9100 requirements and audits supported with NCR closeout oversight and follow on sessions implemented., • Effective interaction with the customer/s for quality escapes and request for customer approvals in conjunction with design & program's needs., • Site champion, facilitating and supporting root cause corrective actions (RCCA), failure reporting and corrective actions (FRACA) analysis & practical problem-solving activities with corrective action sustainment monitoring in place to prevent in service failures., • Ensure all design, design change and technical documentation for product continued airworthiness meet EASA/ CAA Part 21J airworthiness and customer requirements when working with Part 21G organisation., • Support design reviews PDR/ CDR and all stages of DEV program to integrate quality, safety and producibility into initial design., • Technical documentation reviewed and validated to confirm design performance., • Support APQP process to deliver robust manufacturing techniques for Part 21G organisation and robust deployment of MSA., • Supporting DFMEA/ PFMEA, for industrialisation improvements and Part 21G organisation performance., • Internal/ external FAIRs/PPAPs compiled and/ or approved where required with status reported. Requirements • Bachelor's degree in aerospace, science, or engineering highly desirable., • 3 to 5 years' experience in aerospace industry or equivalent at engineering, design & development, or quality positions., • Knowledge of ISO9001, AS9100 QMS standards deployment and implementation., • Understanding of EASA/ CAA part 21J and Part 21G, • Experience in internal and external audit and auditing techniques, lead auditor trained preferred., • APQP Tools knowledge with proficiency demonstrated working with PPAP, FMEA and MSA., • Problem solving proficiency including 8D, RCCA, FRACA with Six Sigma DMAIC principles and Green or Black being desired., • Configuration and data management experience. To apply send your CV today and we'll set up a call to discuss! JBRP1_UKTJ

SENIOR ELECTRICAL DESIGN ENGINEER • Do you like defining and designing solutions to complex engineering challenges?, • Would you relish autonomy and responsibility for cradle-to-grave projects?, • Have you enjoyed working in a safety critical sector such as Oil & Gas, Energy, High Integrity Instrumentation, Defence, Aerospace or similar? Our client seeks a Senior Electrical Design Engineer to deliver turnkey projects in bespoke electrical and instrumentation systems for aero engine testing and development. THE ROLE This is real hands-on problem solving engineering, involving interesting and complex work in an exciting sector. On offer is a competitive package with a well-established and highly respected independent business that boasts exceptional staff retention and team stability. Key skills required: • Understanding of project engineering from concept to handover, • Knowledge of safety critical engineering / high integrity sectors, • Electrical Design, including full schematics and BOMs, • Instrumentation, calibration and measurement systems, • Sensors, transducers and associated instrumentation., • FAT, SAT & Commissioning Benefits • Up to £75,000 basic salary, • Company Car, • Annual bonus, • Generous Holiday Allowance, • Long-term career stability, • Opportunity to work on technically challenging and bespoke projects, • Occasional international travel ABOUT YOU You should enjoy solving practical engineering problems and having autonomy for projects through their full lifecycle. The consequence of engineering failure should be at the heart of a safety critical mindset and reflect in the attention to detail in your solutions definitions and electrical design. You should also be prepared for some overseas travel for the purpose of commissioning your work on site with customers. In addition to the key skills above, the following would be advantageous: • AutoCAD electrical, • NI Signal Conditioning / Data Acquisition, • NI LabVIEW software, • Vibration Systems Knowledge, • Previous or current SC security clearance Applicants may currently be working as Electrical Design Engineers, EC&I Engineers, Instrumentation Engineers, Controls & Instrumentation Engineers, Test Systems Engineers, Project Engineers or similar within aerospace, defence, oil & gas, energy, scientific instrumentation or other highly regulated engineering environments. ABOUT THE COMPANY Our client is a highly respected specialist engineering business designing and delivering bespoke test and development systems for the aerospace sector. They have been established for 36 years and have built a world-wide reputation and a long standing international customer base. They boast exceptional staff retention and team stability; this vacancy has arisen due to the retirement of a long-serving senior engineer. Diagonal J Ltd is acting as an Employment Agency in relation to this vacancy. We are committed to creating an inclusive recruitment process and welcome applications from all qualified individuals. Selection decisions are made solely on the basis of skills, experience and suitability for the role. If you require any reasonable adjustments during the recruitment process, please let us know and we will be happy to discuss how we can support you

Senior Site Agent / Project Engineer Location: St Albans Contract Duration: 12 Months (with strong likelihood of extension) Day Rate: £400 - £450 per day (IR35 determination to be confirmed during the application process) An exciting opportunity has arisen for an experienced Senior Site Agent / Project Engineer to join a major infrastructure project in St Albans. The successful candidate will play a key role in leading project delivery, managing supply chain partners, driving programme performance, and ensuring the highest standards of safety, quality, and commercial control throughout the project lifecycle. Key Responsibilities Communicate and collaborate effectively with key alliance partners, clients, designers, and subcontractors. Organise and manage systems of work within the allocated discipline, ensuring efficient delivery through the relevant supply chain. Develop project programmes and budget forecasts alongside senior project leadership, monitoring productivity and programme performance against targets. Manage subcontractor performance, contractual obligations, and account measurement in collaboration with the commercial team. Ensure labour, plant, and material resources are specified, procured, and available in a timely manner to support programme delivery. Monitor planned versus actual resource utilisation and contribute to weekly and monthly project reporting. Produce and manage Inspection & Test Plans (ITPs), Risk Assessments, and Method Statements (RAMS), ensuring all documentation is completed accurately and on schedule. Take ownership of project quality assurance and quality control processes, including successful project handover to the client. Notify Quality Assurance teams of any non-conformances and ensure corrective actions are implemented. Work closely with Quantity Surveyors and Commercial Teams to manage change events, early warnings, risks, opportunities, and commercial issues. Develop mitigation and recovery plans where project risks threaten programme or budget performance. Manage project budgets, including regular Bottom-Up Forecasting and change management activities. Ensure comprehensive records are maintained for additional works, resources utilised, delivery tickets, and project costs. Champion a positive health, safety, and wellbeing culture across all areas of responsibility. Maintain accurate and detailed daily site records, including variations, subcontractor attendance, and key stakeholder communications. Lead, supervise, mentor, and develop Site Engineers and Assistant Engineers, ensuring strong engineering control and accurate project records. Review performance, training, and development requirements of direct reports on a regular basis. Ensure compliance with all applicable legislation, industry regulations, company policies, and project procedures. Essential Requirements Civil Engineering qualification (HNC, HND, Degree, or equivalent) SMSTS Certification Relevant CSCS Card CPCS Appointed Person (Lifting Operations) Full UK Driving Licence Strong understanding of engineering principles and construction methodologies Extensive technical knowledge of civil engineering and construction best practices Working knowledge of construction contract law and forms of contract Excellent planning, budgeting, and forecasting experience Strong leadership and people management capabilities Exceptional communication and stakeholder management skills Comprehensive understanding of health, safety, environmental, and quality regulations Ideal Candidate The ideal candidate will be a confident and commercially aware civil engineering professional with a proven track record of delivering complex infrastructure projects. They will possess excellent leadership skills, strong technical expertise, and a proactive approach to managing programme performance, project risks, quality standards, and stakeholder relationships. This opportunity is well suited to someone who thrives in a fast-paced project environment and is passionate about delivering successful outcomes safely, on time, and within budget. This vacancy is being advertised by Belcan

This is a really good chance to join an already well established commercial dishwasher and glass washer manufacturer with over 50 years experience as they go through a massive expansion push. Over the next couple of years there will be some amazing changes with them which will see their name be on everyone’s lips for what the they have done, and what they will do. Their engineering team has been very long standing and I can only guess that being looked after and being valued, and being appreciated, and being rewarded has something to do with their low staff turnover. Due to expansion they are recruiting for a commercial dishwasher technician, you will be:- • Providing service and maintenance on a wide range of commercial dishwashers, glass washers, warewashing, conveyor machines etc., • Working on all manufacturers equipment, • Covering London and the home counties area – 2-3 days in London, the rest being outside Preferred Skills of a commercial dishwasher technician • Living anywhere in or around the London or M25 area or home counties area, • Experience needed on commercial dishwashers and / glass washers, • Basic electrical safety course needed Benefits and salary of a commercial dishwasher engineer • 35-38k basic depending on experience on commercial dishwashers, glass washers and warewashing, • Door to door travel pay, • Van, phone, company pension, • 23 days holiday + bank holidays, • overtime available and call out weekend rota, • Further training if required For an immediate interview contact Adam Southam please call me on (phone number removed) (agy) In the event that you are contacted for a role, please note that as part of the registration process you shall be required to provide FRONTrunner Recruitment Ltd. with proof of identity as well as proof of eligibility to work in the United Kingdom

Are you ready to help shape the future of water and wastewater treatment? We're looking for an EICA Design Engineer to play a key role within our Design Team, contributing to projects that protect communities and the environment. In this exciting role, you'll design and develop Electrical, Instrumentation, Control, and Automation systems that underpin critical treatment processes. You'll work closely with civil, mechanical, and process engineering colleagues to ensure seamless integration of all EICA components, from concept design through to commissioning and project handover. Your expertise will support project delivery teams, guiding safe and efficient implementation while staying at the forefront of emerging technologies and best practice in automation and water treatment systems. Please note that this role will require you to be on site or in the office at least 3 times a week. About Enisca Browne Enisca Browne is part of Browne Group, a leading contractor in the UK water and civil engineering sectors. Together we deliver essential infrastructure that supports clean water, safe drainage and reliable services for communities. Enisca Browne focuses on the systems that keep water and wastewater treatment sites running at their best. We work on power, process equipment, control systems and the civil structures that support them. As the Group's mechanical, electrical, instrumentation, control and automation specialist, we manage everything from control panel manufacturing to full system integration and commissioning. Our teams bring deep technical knowledge and a collaborative approach to solving real-world challenges. We offer opportunities for people with a range of skills and backgrounds, from hands-on engineering to project support and technical delivery. Everyone plays a part in helping us deliver safe, smart and sustainable solutions. What We're Looking For Experience, Knowledge and Skills 3–5 years' experience in EICA design engineering, ideally within the water or wastewater sector Understanding of control system architectures, PLCs, SCADA systems, and instrumentation used in water treatment Experience developing electrical and control designs such as SLDs, control strategies, and I/O schedules Familiarity with industry standards relating to electrical safety and control system design Excellent problem-solving abilities, strong communication skills, and the ability to work effectively within multidisciplinary teams Highly organised, adaptable, and comfortable managing multiple tasks in fast-paced project environments Experience with electrical design tools, PLC/SCADA programming, and instrumentation Understanding of water and wastewater treatment processes and their EICA requirements Essential Qualifications Bachelor's degree in electrical engineering, Control Systems Engineering, or a related discipline If you're driven by meaningful engineering work, passionate about technical excellence, and ready to help deliver vital water infrastructure, we'd love to hear from you. Come join a team where your expertise can truly make a difference. The Company has experienced unprecedented growth over the past few years. We have a vast number of employees, and provide support to clients from all over the country

Help Desk Supervisor Location: This role will be primarily based at our Botanica Ditton Park site. We are planning to relocate to Botanica Ditton Park from January 2027. Until then, the role will be based at our current Farnborough office. Siemens Smart Infrastructure - Buildings helps create safe, sustainable and energy-efficient buildings through innovative building technologies, services and solutions. We're seeking a Supervisor to lead our Customer Service Support Office team, ensuring the delivery of excellent customer service and operational performance across our UK service business. Working closely with the Head of Service, you'll drive team performance, oversee key service administration activities and champion continuous improvement to deliver against customer expectations and business objectives. Please note: this role requires candidates to have current and permanent right to work in the UK. We are unable to support visa applications for this position. Key Responsibilities Lead, coach and develop the CSSO team, driving high performance, engagement and a culture of accountability, continuous improvement and excellent customer service. Manage team performance, workload planning, attendance and resources to ensure service levels and operational priorities are consistently achieved. Monitor and improve performance against key operational KPIs, using data and reporting to identify trends, drive improvements and support business objectives. Act as the escalation point for operational and customer service issues, ensuring effective resolution and a positive customer experience. Collaborate with Service Managers, Engineers, Sales teams and customers to support service delivery, account performance and operational goals. Oversee service administration activities, including engineer scheduling and dispatch, maintenance planning, invoicing, quotations and service documentation. Ensure procurement, contract administration and operational processes are managed effectively and in line with company policies and governance requirements. Support compliance, health & safety and RAMS activities, promoting a strong culture of safety, risk management and operational excellence. Identify and implement process improvements, supporting change initiatives, new systems and operational efficiencies across the function. Produce performance reports and operational updates for senior leadership, providing insight and recommendations for continuous improvement. About You: We're looking for a collaborative and results-driven leader with a passion for customer service excellence. You'll be an effective coach and communicator, able to inspire high performance, build strong stakeholder relationships and drive continuous improvement. With a proactive and adaptable approach, you'll thrive in a fast-paced environment while maintaining a strong focus on quality, efficiency and customer satisfaction. Proven experience leading and developing teams within a service operations, facilities management, engineering support or similar operational environment. Demonstrable experience managing performance against KPIs, service levels and operational targets. Strong leadership, coaching and people management skills, with the ability to drive engagement and performance. Experience managing operational workflows, service administration processes and competing priorities within a fast-paced environment. Strong analytical, planning and organisational skills, with the ability to identify trends and implement improvements. Excellent communication and stakeholder management skills, with the ability to build effective relationships with customers and colleagues at all levels. Proficient in Microsoft Office, particularly Excel, Word, Outlook and PowerPoint. Desirable Skills & Experience Experience within Fire & Security, Facilities Management, Building Services, Engineering Services or a similar service-led environment. Understanding of health & safety compliance, including RAMS, permits and related governance processes. Experience with service management, scheduling, workforce management or invoicing systems. Knowledge of SLA management, customer reporting and strategic account support. Understanding of procurement and goods receipting processes. What can we offer? Performance-Based Bonus: Enjoy an annual bonus linked to the company's performance Flexible Working Hours: Achieve a healthy work-life balance with our flexible working arrangements Pension Plan: Secure your future with our generous pension scheme, with employer contributions up to 10%. Time Off: Recharge and rejuvenate with 26 days of annual leave (plus bank holidays), and the option to buy or sell an additional 5 days! We are fully committed to providing equal opportunities and building an inclusive workplace where a broad range of backgrounds and perspectives thrive. We embrace the many ways people think, learn, and experience the world-because we know that diverse minds drive innovation. So that we can support you to be your best during the application and interview process, please let us know if you have any specific requirements. #LI-AD1 #CVL-PLC

Ensuring compliance with COMAH regulations, local process safety legislation and Johnson Matthey process safety policies and standards. EHS Site Process Safety Engineer (On-site Role). As a EHS Site Process Safety Engineer, you'll join a world leader in platinum group metals with over 200 years of h

The Principal Process Safety Engineer will conduct risk assessments, mentor engineers, review safety strategies, and develop safety documentation.

This dynamic position involves managing Process Safety Management (PSM) processes, influencing HSE policies, and implementing improvement initiatives. The role is crucial to achieving organisational and regulatory safety objectives.

Your safety is our priority, so we'll insure you in case of accidents, too.

We are looking for a Project Manager to support one of our NHS Customers in the South of England.As part of their EPR Optimisation Programme they require a PM to manage the SystmOne Enhancement Workstreams.Must have a good understanding of SystmOne within a Community Health Trust environment with ex

Providing Health & Safety advice and guidance to operational teams. Producing and reviewing risk assessments, method statements and contract safety plans. Delivering Health & Safety training to any areas identified within the contract.

Project Engineer (Heavy Lifting Solutions). Are you a Project Engineer or similar with a background in doing heavy lift solutions that wants to join an industry leading company that is currently working on Hinkley Point C and some of marine and Rails most complex infrastructure projects?. Do you wan

Are you a self-motivated individual with a can-do attitude and excellent customer service skills? We're looking for enthusiastic self-employed drivers to join our team in a.As a Delivery Driver, you'll have access to cutting-edge technology that will guide you throughout your delivery day.If you're

Amazon Flex Delivery Driver - Earn £14 to £18* per hour.Deliver packages on your schedule and get paid weekly.Flexible hours and get access to a wide range of deals & discounts.Deliver with us this winter as a seasonal delivery partner.To continue delivering smiles to all our customers, were openi

Our client is a leading distributor of thermoplastic sheet, rod and tubing, supplying customers across the fabrication, engineering and signage industries.

Minimum 40 hours per week + paid overtime available Working Pattern: Monday to Friday, day shifts (weekend overtime also available).Are You an Experienced HGV Class 2 Driver Looking to Earn More?.Due to continued growth and success, our market-leading E-commerce Parcels Business is looking for HGV C

Opportunity to earn between £175.We value our drivers and give you the tools and backing to succeed from day one.Flexible schedule up to 6 days/week.Full onboarding and ongoing support from our dedicated team.Deliver parcels to homes & businesses efficiently and professionally.Follow planned routes

Job Title: Second Line Helpdesk Engineer. We have an exciting opportunity with an established & growing organisation who offer great training for a second line helpdesk engineer.

As Project Engineer in Hydraulics, you will primarily site working closely with the engineers with travel required for installation, commissioning and customer support, including occasional international travel. An excellent opportunity has arisen for a Project Engineer specialising in hydraulic sys

Join InPost - Deliver More & Earn More.InPost is one of the UK's largest parcel delivery networks, delivering millions of parcels every week across the UK, including to over 10,000 parcel lockers.We're looking for Self-Employed Core Delivery Drivers to join our growing team.You'll play a key role in

Due to an increase in workload, our.Delivery Drivers (known internally as Driver Guards).London allowance and varying shift pay.When working on HGV routes, drivers are paid at an enhanced rate (£16.Hours: 40 hours per week (Part time hours also available).Do you want to work in a place where your t

Operate your vehicle in accordance with road safety regulations.

Due to continued project wins and expansion, our client is seeking a Mechanical Project Engineer to join their engineering team and support the successful delivery of bespoke engineering projects from concept through to completion. Hays Engineering are exclusively supporting a well-established and g

Class 2 Driver Immediate Start | Excellent Pay Rates.PAYE, holiday inclusive options available).Monday Friday | Start times: 05:00 08:00.Class 2 Driver job in St Albans.Excellent pay with overtime after 8 hours.Additional Saturday shifts available.Access to Sage Benefits and discount incentives.U

Multi Drop Delivery Driver Tiffin Sandwiches (Watford Site).Unit 11, Faraday close, Watford, WD18 8SA.Monday to Friday & Alternate Saturdays.Full-time (Start times between 00:00 05:00).Tiffin Sandwiches is a leading UK food manufacturing company, producing freshly prepared sandwiches and food-to-go

Early Morning Delivery Drivers Needed!.Join News Team Group, a fast-growing company delivering newspapers and magazines to homes and businesses across the UK.Were looking for reliable, self-employed delivery drivers who are ready to hit the road and make an impact in their local community.Join a tea

Deliver a local round on agreed days and take control of your earning opportunity.Evri delivers over a billion parcels a year through a network of more than 30,000 couriers.Were recruiting self-employed delivery drivers in your area now.We have opportunities ranging from a few agreed days each week

From intelligent safes and cash-in-transit services to cash processing and ATM replenishment, we play a vital role in supporting the everyday flow of money in society.

Carry out daily vehicle inspections and maintain high standards of vehicle cleanliness and safety.

Duties of a Production Operative As a Production Operative, you will play a key role in the manufacturing process. Monitoring production processes to ensure products meet quality standards. Following all health and safety procedures, company policies, and hygiene standards at all times.

Project Manager - Tier 1 Industrial & Logistics £85,000-£95,000 + Car Allowance + Excellent Package | North West & Midlands Are you an experienced Project Manager working for a Tier 1 or Tier 2 main contractor and looking for your next major career move? We're working with a leadi

If youve also worked in the following roles, wed also like to hear from you: Machine Operator, Manufacturing Operative, Process Operative, Production Technician, Factory Assistant, Production Assistant, Warehouse Operative, Manufacturing Technician, Manufacturing Assistant, Assembly Operative, Packa

Every workplace in the UK has a legal duty to protect its employees, which is why health and safety professionals are in constant demand. Trainee Health and Safety Officer – No Experience Needed. Future-proof your career in Health and Safety – starting today.

We’re looking for an experienced Commissioning Engineer or Project Engineer to take technical ownership of integrated security projects from start to finish. Project Engineer – Integrated Security Systems- North West/Yorkshire- £40,000-£44,000. This is an excellent opportunity for an engineer

We're seeking a Health, Safety & Environmental Advisor (HSE) professional to join our team covering Waltham Forest, Welwyn and Hatfield. In this role, you'll work closely with operational teams, site managers and project stakeholders to support the delivery of our Health, Safety, Environmental and Q

Health & Safety Manager – Signage & Manufacturing Location: Watford, Hertfordshire Salary: DOE Company: A leading signage and display company. Role: To support the implementation of the H&S strategy and programs; to champion and oversee the adoption and deployment of robust occupational health

Trainee Health and Safety Advisor – No Experience Needed. Future-proof your career in Health and Safety – starting today. Looking for a career change? Currently employed but want something better? Or maybe you are between jobs and ready for a fresh start? ITOL Recruit’s Health and Safety Train

PROJECT MANAGER £70,000 + Car Allowance Full Time | Site Based | 37.Benefits • Car allowance • On‑site parking • All PPE and uniform provided • 33 days holiday including bank holidays • Contributory pension • Non‑contributory life cover • Contin

Training + Progression + Unlimited Holiday + Benefits.Are you a CAD Technician/Architectural Designer or similar, coming from a background within the fabrication/manufacturing/construction/glazing/cladding sector or a related field, looking to join a highly-impressive, well-respected company, quickl