Process safety engineer jobs in NottinghamCreate job alerts

Field Service Engineer | UK travel required | Permanent | Up to £48,000 | OTE up to £65,000Cherry Professional are looking for an experienced Field Service Engineer to conduct Electrical and Mechanical maintenance, servicing and repairs to machinery UK wide.Working Monday – Friday. Please note this role also includes regular travel UK wide.Responsibilities:• Diagnosing faults with machinery• Servicing and emergency repairs• Carry out asset care plans and PM schedules across a range of automated filling and packaging equipment, robotics, site services and liquids processing equipment.• Operating within a CMMS system• Electrical fault finding• Root cause analysis• Diagnostics• Plant, machinery, and services breakdowns, identifying root cause, and implementing the required mechanical and electrical asset care.• Assist with contractor servicing of plant, machinery, and services.• Ensure compliance with safety regulations and standards• Follow maintenance schedules and carry out routine servicing of machinery• Process Improvement, Quality, reporting and Safety.Ideal Candidate:• Extensive Electrical knowledge• Experience working on a range of electrical and mechanical breakdowns repair of plant, machinery, and services.• Experience of implementing PM schedules• Experience working with hydraulic, pneumatic, robotic systems.Cherry Professional are recruiting on behalf of their clientRoles you may have applied for: Field Service Engineer | Service Engineer | Mobile Maintenance Engineer | Electrical EngineerCherry Professional are recruiting for this opportunity on behalf of our client. Please view our Privacy Policy on our website to understand how your data will be used if you apply for this role.

DESIGN ENGINEER – HEAVY ENGINEERING SANDIACRE, NG10 5AN (ONSITE) COMPETITIVE SALARY Are you a Design Engineer looking to work on varied, challenging projects within a dynamic and collaborative engineering environment? Progress Rail Services UK is seeking a talented Design Engineer to join our diverse Engineering team based in Sandiacre. Managing multiple projects at any one time, you’ll take ownership of the design and development of engineering products from initial justification through to full technical documentation and in‑service support. You’ll be involved across the full product lifecycle, working closely with interfaces such as assembly, installation, operation, maintenance and disposal. THE ROLE: As a Design Engineer you will be required to: • Design, develop and safety‑validate engineering products for rail track systems, with a focus on cost‑effective manufacture and installation, • Improve existing products, processes and design tools, • Evaluate and select optimal design solutions, • Produce drawings and technical documentation for formal design acceptance and sign‑off, • Identify emerging risks and opportunities, keeping Senior Engineers informed, • Deliver accurate, high‑quality work in line with engineering and drawing standards, • Use and support the development of new design tools, • Apply practical understanding of product behaviour, manufacturability and maintenance, • Complete design tasks accurately and to agreed timescales, • Support manufacturing with engineering compliance, NCRs and process changes THE CANDIDATE: The ideal Design Engineer: • Masters Degree in relevant engineering discipline or equivalent, • At least two years’ experience working within a regulated and safety critical manufacturing industry such as nuclear, chemical, aerospace, or automotive, • Ability to generate design salutations to recognised standards, • Strong communication skills, • Chartered Engineer or working towards Chartership, • Innovative and resilient problem solver, • A knowledge of Finite Element Analysis would be a benefit, • Willingness to travel nationwide and overseas on occasion BENEFITS: • Competitive salary with an annual bonus, • Tailored training to help you learn and develop, • Company funded external qualifications (where relevant to the role), • Company pension scheme with 7% employer contribution, • Life assurance cover 3.5 x salary, • Employee Assistance Programme, • Discounted gym membership – up to 25% off across 4,000 UK gyms, • Fuel Card – save 2-3p per litre on across 3,500 UK fuel stations including BP, Esso and Shell, • Various employee recognition schemes, • 33 days holiday per annum, pro rate (inclusive of bank/public holidays) ABOUT PROGRESS RAIL: Progress Rail, a Caterpillar company, is one of the largest integrated and diversified providers of rolling stock and infrastructure solutions and technologies for the global rail industry. The company provides advanced EMD® locomotives, engines, and technologies, railcars, trackwork, fasteners, signalling, rail welding and Kershaw Maintenance-of-Way equipment, along with dedicated locomotive and freight car repair services, aftermarket parts support and recycling operations. Progress Rail’s deep industry expertise ensures a commitment to quality through innovative solutions. With a global network across the United States, Canada, Mexico, Brazil, Germany, Italy, Australia, China, Germany, India, South Africa, the United Arab Emirates and the United Kingdom, we are committed to serving our customers. PROGRESS RAIL VALUES: • Integrity – the power of honesty, • Excellence – the power of quality, • Teamwork – the power of working together, • Commitment – the power of responsibility, • Sustainability – the power of endurance EQUAL OPPORTUNITIES: Progress Rail is an equal opportunity employer. All qualified applicants will receive consideration for employment. We value and embrace diversity of thought, background and unique experiences and we pride ourselves on being an inclusive workforce and culture. HOW TO APPLY: To be considered for this role, please click on the link provided. If you would like any further information about this vacancy before applying, please feel free to contact Taher Rahman at our Sandiacre site. We would politely request no agencies please.

We are hiring Full Time METER READERS in your postcode now!\n\nRole: Meter Reader (gas and electricity only) - working close to home no experience is required.\n\nDo you like working in an active outdoor role? Do you want to take control of your schedule and work flexibly? If the answer is yes, then this could be the role for you.\n\nAs a Meter Reader you will be responsible for collecting data from gas, electricity meters for both commercial and residential properties. You will update meter reads accurately throughout the day on your handheld device, also entering the details on a handheld device at each location and providing excellent customer service.\n\nWhat we offer:\n\n· £13.45 - 14.80 per hour basic pay (weekly payment)\n\n· Weekly Hours 37.5 hours a week with flexible start and finish times Monday - Friday between 8am - 8pm.\n\n· £27,000 to £31,000 average annual earnings.\n\n· Progression and promotion opportunities for higher earnings -( 360 technical Meter Reader, Auditor, Gas and Electric Engineer, Field Assistant manager, Field Manager.\n\n· Weekly Bonus scheme with earnings up to £250 weekly.\n\n· Overtime rates at manager's discretion.\n\n· Business expenses reimbursed at 30.05 pence per mile.\n\n· Company pension enrolment.\n\n· No previous experience required.\n\n· Up to 28 days holiday per year.\n\n· Full uniform and PPE provided.\n\n· Full training will be provided.\n\n· Double pay on Bank Holidays\n\nWhat you will need to apply\n\nEssential requirements for the role: \n\n· UK Driving Licence with no more than 6 points\n\nPhysically fit and have no issues with bending in tight spaces, lifting or kneeling, climbing stairs, crouching, and walking on average 3-5 miles a day.\nHappy to work in all weather conditions.\nClear DBS check (no unspent criminal convictions)\nPrevious Customer Service experience (preferred not essential)· Access to your own vehicle\n\n· Basic Business insurance.\n\nDuties:\n\nRetrieving data from domestic, commercial, and industrial sites for Gas and Electric Meters, full training will be given.· Carry out visual inspections of associated metering equipment.\n\nCharge Point Surveys.\nDrive and motivation to work in an independent role.\nFriendly personality with a professional approach to work.\nAdhering to Health and Safety guidelines at all times.Training:\n\nTraining is 1 week and will be both classroom-based and field-based with an experienced meter reader, so you get to see the job through a professional's eyes. If interested, please click apply to get started.\n\nShould you require any support or assistance, please contact your local Gi Group office.\n\nGi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. \n\nGi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role.\n\nWe are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Maintenance Engineer\n\nPinxton, NG16\n\nContinental Shift Pattern\n\nPermanent Role\n\nUp to £40k (DOE)\n\nPermanent Position\n\nAn established manufacturing operation is currently seeking an experienced Maintenance Engineer to join their engineering team. This is a key role supporting high‑volume production across a large-scale manufacturing facility.\n\nThe Role:\n\nAs a Maintenance Engineer, you will be responsible for providing effective reactive and preventative maintenance to ensure machinery, ancillary equipment, and site infrastructure operate safely, efficiently, and reliably.\n\nKey responsibilities include:\n\nResponding promptly to machinery breakdowns to minimise production downtime\nCarrying out planned preventative maintenance (PPM)\nDiagnosing and repairing mechanical, electrical, pneumatic, and hydraulic faults\nMaintaining and servicing machinery and equipment\nSupporting tool changes and ensuring correct operation\nMaintaining ancillary equipment such as dryers, conveyors, chillers, compressors, and robots\nCompleting maintenance logs, reports, and documentation accurately\nWorking closely with production teams to resolve recurring issues\nSupporting continuous improvement and root cause analysis initiatives \n\nSkills & Experience:\n\nYou will ideally have:\n\nProven experience in a manufacturing maintenance environment\nStrong fault‑finding skills across mechanical and electrical systems\nA proactive, safety‑focused approach\nThe ability to work effectively within a 24/7 production environment\nEngineering qualifications are advantageous but not essential, depending on experience \n\nShift Pattern & Package:\n\nShift Pattern: Continental shifts - 3 days on / 3 days off\nHours: 07:00 - 19:00\nSalary: Up to £40,000 per annum (dependent on experience)\nOvertime: Paid at time and a half after 39 hours\nOvertime Availability: Regular opportunities \n\nTo Apply\n\nIf you feel that you have the skills / desire for this role, please click Apply. Nicole @ Gi Group will process your application.\n\nShould you require any support or assistance, please contact your local Gi Group office.\n\nGi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. \n\nGi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role.\n\nWe are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Contracts Engineer\nThis challenging and exciting Contracts Engineer opportunity requires an individual with at least 2-3 years’ experience in taking the responsibility for supporting or delivering piling, foundations, or geotechnical engineering sites and projects.\nDue to sustained growth, a significant forward order workload and a continued commitment to be at the forefront of the industry, our client is now searching for a talented and motivated Contracts Engineer with experience (at any level) within the piling, foundations or ground engineering sectors. Supporting the Project Manager, the successful candidate will enjoy the day-to-day responsibility for the safe, timely and profitable delivery of a wide variety of projects and schemes, all running simultaneously at differing stages of completion. This will include managing a site-based team, and resolving any technical, operational and commercial issues as required.\nThe Role\n * Plan, programme and deliver contracts in conjunction with the regional team, internal departments, and subcontractors in accordance with company policy\n * Take responsibility for all assigned projects, including the review of estimates and designs to ensure buildability, and leading projects with the client from receipt of order to completion\n * Attend pre-contract and regular site meetings with the client, client’s agents and key sub-contractors (internal and external) to ensure the smooth running of contracts\n * Inspect works in progress to ensure conformance to QA procedures and specification, and that schemes are delivered in accordance with the correct designs and specifications\n * Ensure HSEQ plans and RAMS are prepared for contracts in accordance with company policy\n * Attend regular meetings with the contracts team to provide progress reports on projects, and if required, offer proposals or recommendations to enable successful delivery\n * Provide technical and operational input into estimates for schemes\n * Assist in the preparation of proposals during the pre-tender phase as required\n * Ensure the commercial team is provided with all relevant information, documentation and instructions to support contract variations and final accounts submissions for payment\n * Carry out toolbox talks as required\n * Ensure all projects are planned and executed in accordance with company policy, whilst maintaining and improving the professional and progressive image of the company wherever possible\n * Analyse and interpret detailed client requirements, drawings and specifications\n * Work under deadline pressures in an efficient, composed and calm manner\n * Assist the business as a whole to meet their financial targets\n * Help to manage suppliers and sub-contractors to improve safety, performance and profit\nThe Person\n * Possessing experience in a contracts, projects or site engineering role from any area of the piling, foundations, retaining structures or ground engineering sectors\n * To have assisted in the development and delivery of projects with a diplomatic and pragmatic approach, but also with a hands-on attitude to clients, sub-contractors and teams\n * To possess first-hand exposure to various contracts, and demonstrate a lead from the front approach\n * Hold experience of a variety of projects, including multi discipline techniques\n * Possess an understanding of all stages of the contracting process, coupled with the ability to manage and develop yourself both technically and commercially\n * Able to identify the requirements of assigned projects to efficiently and effectively produce the most appropriate delivery plan or programme\n * Correspond and negotiate with clients, suppliers, contractors and colleagues\n * Efficiently manage situations when workload presents conflicting demands on time and availability, demonstrating an ability to effectively prioritise and schedule\n * Monitor, progress and implement controls to ensure tasks are achieved to time, cost and quality\n * Develop and select effective solutions to project requirements\n * Communicate facts to stakeholders (internally or externally) in an effective manner\n * Deliver efficient and effective customer service at all times\nOur Client\nOur client is a market leading piling, foundations, retaining structures and ground engineering contractor. Their service offering covers all disciplines and techniques for a wide variety of clients and project applications. They not only complete projects successfully and to the highest of standards at all times but also add value to their clients by giving them total support from the beginning to the end of each and every contract.\nAn attractive basic salary (commensurate with experience) plus extensive benefits package is on offer to the successful candidate, along with longevity and security of work and forward career progression given that our client possesses a significant contract pipeline for the long-term future and is firmly committed to continued growth over the next 5-10 years

A leading manufacturer of heating and renewable products is recruiting an experienced Heat Pump Engineer covering the Derby and Nottingham postcode regions. This is a field-based role focused primarily on the service, fault finding and repair of air source heat pumps within domestic properties.\n\nThe position will also include some gas boiler repair, servicing and heating system diagnostic work where required.\n\nThe successful candidate must have proven heat pump experience and be confident working independently in customers’ homes. This is an excellent opportunity for an engineer with strong renewable heating knowledge who wants to join an established manufacturer with a recognised product range, strong technical support and long-term career development opportunities.\n\nKey Responsibilities:\n\n * \n\n Carry out service, maintenance and repair work on domestic air source heat pumps.\n\n * \n\n Diagnose faults on heat pump systems and complete effective repairs.\n\n * \n\n Identify and replace faulty components across renewable heating systems.\n\n * \n\n Carry out system checks including controls, wiring, flow rates and heating performance.\n\n * \n\n Complete heating system diagnostics across domestic properties.\n\n * \n\n Carry out gas boiler fault finding, repairs and servicing where required.\n\n * \n\n Complete CP12s and relevant gas safety documentation where applicable.\n\n * \n\n Provide clear technical advice to customers in a professional manner.\n\n * \n\n Represent the manufacturer’s brand positively while delivering excellent customer service.\n\n * \n\n Complete job sheets, service records and compliance paperwork accurate.\n\nPreferred Ideal Experience & Skills Required\n\nThe successful candidate will demonstrate the following:\n\n * \n\n Proven experience servicing, fault finding and repairing domestic heat pumps.\n\n * \n\n Strong working knowledge of air source heat pump systems.\n\n * \n\n Experience working on domestic heating systems.\n\n * \n\n Current Gas ACS certificates including CCN1 and CENWAT1.\n\n * \n\n Valid Gas Safe registration.\n\n * \n\n Previous boiler fault finding and repair experience.\n\n * \n\n Competence using a multimeter and completing electrical safety checks.\n\n * \n\n Strong diagnostic skills across heating controls and system performance.\n\n * \n\n Excellent customer service skills.\n\nWhat's on Offer\n\nThis role offers the chance to join a leading manufacturer within the heating and renewable energy sector with strong brand recognition, excellent technical support and genuine long-term career opportunities. The package includes a competitive salary with strong OTE potential, company van with private use, fuel card, pension, 25 days holiday and further benefits. This is a great opportunity for a heat pump engineer who wants to stay hands-on while developing within one of the fastest-growing areas of the heating industry.\n\nSalary :- c£55k OTE + Van (with Private use), Pension & further great benefits\n\nLocation :- Nottingham, Derby & Surrounding areas. Must live in an NG or DE postcode.\n\nCompany:- One of the largest European Manufacturer of Heating and Renewable Products.\n\nDiversity & Inclusion\n\nENMASE Group operate an inclusive and diverse recruitment process, removing any barriers to the recruitment journey where possible, whilst also ensuring our clients do the same and we can provide any advice or education to them in relation to this. If there may be any support or adjustments required at any point throughout your recruitment journey with us, then please let us know and our trained consultants will assist and advise you accordingly

Job Title: Multiskilled Engineer\nSalary: £40,000 - £50,000\nBenefits: Extensive benefits package, including the top package Health Care\nLocation: Nottingham\nType: Permanent || Full Time\nShifts: Monday to Friday 10:00 am to 19:00 pm || with potential for rotational shifts and some paid or TOIL weekend overtime.\nOverview:\nThe Flavour Network is looking for a multiskilled engineer to join our client, a fast-growing, forward-thinking food manufacturer based in Nottingham. As the multiskilled engineer, you’ll play a hands-on role in developing mechanical and automation solutions, such as using sensors, solenoids, and linear actuators to creatively ensure the product is spread evenly during production.\nThis multiskilled engineer role is ideal for someone who enjoys solving practical problems, applying innovative thinking to real-world manufacturing processes, and fine-tuning equipment to meet the unique needs of their food production environment.\nResponsibilities for the Multiskilled Engineer:\n * Carry out planned preventative maintenance (PPM) and respond to unplanned breakdowns\n * Diagnose and repair mechanical and electrical faults across varied production equipment\n * Work on conveyors, packaging machines, weighers, chillers, mixers and more\n * Support the installation and commissioning of new machinery and production lines\n * Maintain accurate maintenance and service records\n * Contribute to continuous improvement and reliability projects\n * Ensure full compliance with H&S and food hygiene standards\n * Collaborate with Production, Technical, and QA teams to support day-to-day operations\n * Mentor apprentices or junior engineers as needed\n * Lead or support process and machinery improvement projects\nRequirements for the Multiskilled Engineer:\n * Proven experience in a similar engineering role within a food manufacturing environment is preferred.\n * Competence in both mechanical and electrical disciplines (roughly 60/40 or 50/50 split)\n * Confident working with PLC-controlled and automated systems\n * Skilled in fault-finding and quick diagnostics under pressure\n * Strong understanding of food safety, hygiene, and health & safety protocols\n * Experience with sensor logic, VFDs, and control systems is desirable\n * Ability to carry out minor fabrication and machine modifications (e.g. drilling, grinding, welding)\n * A proactive, solutions-focused mindset with great communication skills\n * Eagerness to continuously improve processes and machine performance

Job title: Electrical Modification Technician\nJob location: Nottingham\nShifts: Days Monday to Friday or Sunday or Thursday\n Must be flexible to do the odd night shift if requested\n\nHours per week: 45 to 50 hours per week\n\nRates: First 40 hours £22.85 Paye - £29.74 Umbrella\n After 40 hours £28.57 - £34.65 Umbrella\n\nDuration: Ongoing\nStart date: ASAP\n\nIndustries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering\nDisciplines considered: Diesel Engine Fitter, Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer\nCompany Summary: \nThey are a global leader in Rolling Stock vehicle manufacturing, service and maintenance.\n\nPosition Summary\nThis position is for an electrically biased technician, to carry out electrical modifications and system testing. You will be expected to work from modification written instructions, engineering drawings, wiring diagrams and maintenance instructions. This is a Safety Critical position and is a requirement against the Service Agreement (SA). This could also include the following:\n* Rerouting wiring \n* Cable pulling \n* Indenting cables \n* Re-install wiring \n* Test Continuity\n* Installing software \n* Changing relay boxes\n\nPerson Profile/Experience:\nPrevious Rail experience is preferred but not essential \nQualifications:\nA Level 3 or equivalent qualification or above in an Electrical discipline is required.\n\nContact Information:\nEmail: (url removed)\nPhone: (phone number removed)\n\nPLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.\n\nPlease note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.\nPlease note the above job specification could be subject to change as agreed with our client

Job Title: Project & Automation Engineer\n\nSalary: £55,000 - £60,000\n\nLocation: Nottingham\n\nJob Type: Full-time, Permanent (direct with employer)\n\nOverview\n\nThe Flavour Network are partnering with a fast-growing food manufacturer in Nottingham to recruit a Project & Automation Engineer.\n\nThis role suits a genuine “tinkerer” who enjoys transforming ideas into practical solutions. As the Project & Automation Engineer, you'll design, build, and commission automation systems that enhance efficiency and decrease manual workload, guiding projects from concept to completion.\n\nAs a Project & Automation Engineer, you will work closely with the Production and Engineering teams to deliver smart, reliable solutions that support long-term growth. If you enjoy solving complex challenges and creating bespoke systems where your ideas are truly implemented, this role is perfect for you.\n\nKey Responsibilities for the Project & Automation Engineer\n\n * Design, fabricate, and install mechanical improvements, rigs, and production aids\n\n * Build and wire control panels (VFDs, relays, contactors, PLCs)\n\n * Programme and modify PLCs and HMIs for automation upgrades\n\n * Install and calibrate sensors, solenoids, motors, and safety devices\n\n * Lead or support CAPEX and process improvement projects from concept to commissioning\n\n * Collaborate with Production teams to trial and optimise automation systems\n\n * Maintain accurate documentation for installations and improvements\n\n * Install and commission new machinery and production line changes\n\n * Ensure compliance with food safety and health & safety standards\n\n * Support and mentor junior engineers or apprentices\n\nRequirements for the Project & Automation Engineer\n\n * Proven experience in controls and automation engineering within food, FMCG, or manufacturing environments\n\n * Strong PLC and HMI programming skills (e.g. Ladder Logic, Mitsubishi, Omron)\n\n * Experience designing, building, and wiring electrical control panels\n\n * Hands-on mechanical fabrication skills (MIG/TIG welding, cutting, assembly)\n\n * Solid understanding of sensors, control systems, and integration\n\n * A practical, solutions-focused mindset with the ability to turn concepts into working systems\n\n * Self-motivated with strong ownership of projects from start to finish\n\n * Effective communicator with good documentation skills\n\n * Creative and innovative thinker who enjoys both hands-on work and strategic problem-solving\n\nWhat’s on Offer for the Project & Automation Engineer\n\n * Competitive salary + a fantastic Benefits Package\n\n * Opportunity to work on exciting, bespoke engineering projects\n\n * A supportive environment where your ideas are implemented\n\n * Real ownership and autonomy in your work\n\n * Career development within a growing and forward-thinking business\n\nIf you’re an engineer who loves building, improving, and bringing ideas to life, we’d love to hear from you

BESS Field Service Engineer - Energy Storage (O&M) We’re looking for BESS Field Service Engineers to join one of the UK’s leading BESS O&M providers. This is a field-based role supporting a growing portfolio of BESS assets across the UK, reporting into the O&M Manager. With over 17 projects in the pipeline, this is a long-term, secure platform within a high-growth environment. As a Field Service Engineer, you’ll be responsible for maintaining and optimising BESS assets, ensuring high availability and performance. You’ll carry out planned and reactive maintenance, support commissioning activities and act as a key technical resource across operational sites. BESS Field Service Engineer - Key Responsibilities • Deliver planned preventative and reactive maintenance on BESS assets, • Diagnose and resolve electrical and system faults across HV/LV equipment, • Carry out inspections, testing and annual capacity checks, • Monitor system performance and analyse operational data, • Support firmware and software upgrades across systems, • Identify and implement reliability and performance improvements, • Provide remote diagnostics and phone support where required, • Support commissioning and handover of new BESS sites, • Work closely with internal engineering teams to resolve complex issues, • Operate in line with UK safety standards and site procedures, • Conduct risk assessments and ensure safe systems of work, • Maintain accurate service records, reports and documentation, • Manage spare parts and inventory at site level, • Feed back field issues to support system and process improvements BESS Field Service Engineer - Requirements • Qualification in Electrical or Electro-mechanical Engineering, • Experience in maintenance within power generation, renewables or industrial environments, • Strong fault-finding capability across electrical systems, • Basic IT skills (Excel, Outlook, diagnostics tools, networking fundamentals), • Willingness to travel across UK sites, with occasional overnight stays Desirable: • Experience working on BESS or power electronics (inverters, converters, transformers), • HV/LV authorisation or experience working on high-voltage systems, • Understanding of networking (IP, VLANs, Modbus/TCP), • 18th Edition / BS7671, Test & Inspect (2391) or similar, • HVAC / F-Gas knowledge Why Apply? They can offer you a permanent, secure future with a company due to deliver 15+ projects over the next 5-10 years. They have offices throughout the UK, with great benefits including annual bonus up, private healthcare, life assurance and a competitive base salary dependent on experience. Beyond package, they do a lot socially and it's a tight knit team. Culture is mission driven / hard working. Anyone working here will be at the forefront of the energy transition and making an impact. If this peaks your interest, reach out today to have a confidential discussion and find out more about this opportunity! Submit your CV or contact Holly Higginson () to see if this could be the next step in your career.

Group Functional Safety Specialist (Process Safety) UK – Fully Remote + Global Travel I am currently supporting a major international manufacturing business with the search for a senior Functional Safety specialist to join their central Process Safety function. This is not a standard project-based Functional Safety Engineer role. The position sits at group level, supporting multiple international operating sites across Europe, Asia and the US, with a strong focus on live plant environments, operational assurance, and improving functional safety performance across the business. The role requires someone who can operate both strategically and technically, helping shape functional safety standards and governance across the group, while still remaining hands-on across the full IEC 61511 lifecycle. Key areas include: • Leading and facilitating LOPA and SIL Assessments, • SIS / SIF design support and design verification, • Functional Safety Assessments (FSA), • Supporting live operating sites with safety-critical systems, • Driving functional safety improvements across global manufacturing assets, • Working closely with site engineering, operations and EHS leadership teams, • Training, auditing and process safety incident support where required The key requirement is strong owner-operator experience within high-hazard operating environments. This role is much more focused on operational functional safety and accountability for live assets, rather than purely consultancy, design house or project-led exposure. Ideal backgrounds could include chemicals, petrochemicals, refining, oil & gas, COMAH sites, or other major process manufacturing environments. Recognised Functional Safety qualification required (TÜV, CFSE or equivalent). The role is fully remote within the UK, with significant international travel expected (typically 50–60%). If this sounds relevant, feel free to message me directly for a confidential discussion.

About the client Our client is a confidential leading international integrated energy company with a strong global project engineering capability, currently driving an ambitious energy transition programme spanning CCS/CCUS, renewables, and hydrogen alongside its traditional oil and gas portfolio. The Basingstoke engineering office is a fully integrated project execution hub delivering multi-discipline engineering across all phases of complex projects worldwide, with a dedicated Subsea Systems department at its core. Project scope The assignment is based within the client's Basingstoke Subsea Systems department, providing Flow Assurance technical leadership across multiple concurrent international oil and gas projects — from feasibility and concept development through FEED, detailed engineering, and handover to operations. The role also extends to CCUS projects, covering CO₂ transportation system assessment and thermo-hydraulic studies specific to CO₂ transport. The Senior Engineer will operate as both a technical lead and a Discipline Project Lead (PDL), accountable for Flow Assurance deliverables across assigned projects and responsible for mentoring junior engineers within the discipline. The client operates a hybrid working policy: up to 12 working days per month from home are available, enabling approximately 60% remote working. Role overview To provide senior Flow Assurance technical leadership across the full project lifecycle — from conceptual studies through FEED, tendering, detailed engineering, and operations support — ensuring technical rigour, cross-discipline integration, and compliance with applicable standards across the client's international oil and gas and CCUS projects. Reporting line: You will report to the Flow Assurance Coordinator and the Chief of Subsea Systems, and work in daily coordination with discipline engineers, interface disciplines (Pipelines/Subsea, Process/Facilities, Operations), contractors, and reservoir and laboratory teams. Key responsibilities Technical delivery • Prepare all Flow Assurance technical documentation across project phases: conceptual study, FEED, tendering, contract package preparation, detailed engineering, and operations, • Review and approve FEED, tender, and detailed engineering deliverables prepared by contractors for the Flow Assurance discipline, • Identify, define, and analyse complex multiphase hydrocarbon transportation schemes, • Assess CO₂ transportation systems, evaluate operating envelopes, and support thermo-hydraulic studies for CCUS projects, • Provide technical support to interface disciplines — Pipelines/Subsea, Process/Facilities, Operations — ensuring integrated solutions across all project phases, • Support operations and troubleshoot start-up and commissioning issues as required Procurement & contractor management • Follow up supplier calls for tender and selection processes: qualifications, clarifications, and technical recommendations for the Flow Assurance discipline, • Manage interfaces with reservoir engineering and laboratory teams throughout the project lifecycle Project leadership & PDL duties • Act as Discipline Project Lead (PDL) on assigned complex projects: perform technical and administrative PDL functions, • Proactively identify and report manhour and schedule variations due to scope changes; escalate to the Flow Assurance Coordinator and Chief of Subsea Systems, • Support the Flow Assurance Coordinator and Chief of Subsea Systems in preparing manhour estimates for new proposals, • Liaise with engineering disciplines throughout the project execution phase; coordinate and manage cross-discipline interfaces Standards, mentoring & continuous improvement • Ensure awareness of and compliance with international standards and codes applicable to Flow Assurance, • Advise on correct interpretation and application of company internal standards and HSEQ policies; develop new standards as required, • Mentor engineers within the Flow Assurance team; contribute to knowledge sharing and continuous improvement across the discipline, • Support technical and safety reviews: HAZOP, HAZID, risk assessments, design and safety reviews Key deliverables • Flow Assurance technical documentation delivered on schedule and to the required quality standard across all assigned project phases, • Contractor and FEED deliverables reviewed and approved within defined timescales, • Manhour estimates and variation forecasts provided accurately and proactively, • PDL functions performed rigorously across assigned complex projects, • Junior engineers mentored with structured guidance and discipline knowledge transfer Requirements Education • Degree in Engineering with graduate-level knowledge of thermodynamics and fluid dynamics — petroleum, chemical, mechanical, or related discipline Experience Must-have: • Extensive experience as a Flow Assurance Engineer across the full project development lifecycle — from concept development through FEED, detailed engineering, and handover to operations, • Proven capability in identifying, defining, and analysing complex multiphase hydrocarbon transportation schemes, • Experience performing technical review of Flow Assurance documentation produced by team members and contractors, • Experience with Technical Audit and Design & Safety Reviews — HAZOP, HAZID, Risk Assessment, • Ability to manage complex and diverse assignments with a high degree of independent technical judgement Nice-to-have: • Operational experience (commissioning, start-up, or production support), • Experience on CCUS projects — CO₂ transportation system assessment and thermo-hydraulic modelling Technical skills • Proficient with Flow Assurance simulation software: OLGA, PVTSim, Multiflash, Pipenet, Pipesim, Hysys, Unisim, • Familiarity with programming languages (Matlab, C++, Python) — an advantage, • Strong understanding of international codes and standards applicable to Flow Assurance and subsea systems, • Knowledge of HSE and technical risk integration into engineering and project solutions Soft skills • Strong technical leadership and engineering judgement — able to operate independently at senior level, • Effective communicator across disciplines, stakeholder levels, and cultures — both laterally and vertically within the organisation, • Collaborative and multidisciplinary approach to project delivery, • Structured task prioritisation and ability to manage concurrent workstreams under pressure, • Fluent English — mandatory

About Plessey We’re building the hardware foundation for next-era computing. Plessey is a world-leading technology company driving the next generation of photonic devices and systems. With over 70 years of innovation, we combine research, materials science, process engineering, and manufacturing under one roof. We’re recognised as a global authority in microLED displays, optical computing, and optical interconnects. Join us to work on breakthrough technologies shaping the future of light-based technology and computing. Lead We don’t follow industry trends; we create them, pushing boundaries and setting standards others aspire to. Every team member has the power to make decisions, drive change, and deliver excellence. We support each other, challenge one another for the best solutions, and lead by example. Together, we build industries and technologies that shape the future and scale toward our vision of the next era of computing. Grow We expand our capabilities every day — deepening our expertise, improving how we work, and pushing the boundaries of what’s possible. Curiosity fuels us: we question assumptions, explore new ideas, and innovate with light-based technologies. By investing in and empowering our people, we strengthen Plessey’s impact and help shape the future of optical technology. Trust We operate like a family—honest, reliable, and supportive. We have each other’s backs, own our actions, and uphold the highest standards of integrity and safety. We trust each other to deliver, our customers to challenge us, and our expertise to guide the way. Together, trust enables the collaboration essential for breakthrough innovation and lasting impact. Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role We are seeking a senior Embedded Software Engineer to join the Product Development team and contribute to embedded firmware development and hardware–software integration. This is a hands-on role, working closely with the Principal Engineer and Senior Hardware Engineer to translate system architecture into reliable embedded implementations across prototypes, demos, and product platforms. Key Responsibilities • Design, implement, and maintain embedded firmware in C/C++., • Develop and maintain low-level drivers and application firmware., • Support bootloader development and firmware update functionality., • Implement firmware robustness, error handling, and recovery paths., • Support firmware bring-up on new hardware., • Debug hardware/firmware issues involving power, clocks, interfaces, and timing., • Work with schematics, PCBs, and lab equipment during development and debugging., • Support validation and test readiness of embedded systems., • Translate architectural intent into working embedded implementations., • Take ownership of defined subsystems with appropriate guidance., • Contribute to technical documentation and knowledge transfer., • Support integration with test environments and higher-level software systems. Skills, Knowledge and Expertise • Background in Electronic Engineering or similar discipline., • Experience in embedded software development (C/C++)., • Experience with microcontrollers (e.g. STM32 or similar)., • Experience with bare-metal and/or RTOS-based systems., • Comfortable reading schematics and understanding hardware design., • Experience with board bring-up and low-level debugging., • Experience using SWD/JTAG, logic analysers, and oscilloscopes., • Understanding of common interfaces (USB, SPI, I²C/I3C, UART). Advantage • USB device development experience., • Familiarity with embedded Linux or Zephyr., • Experience supporting prototype, demo, or pre-production systems.

Principal Engineer - Software Assurance £65.98 p/hr - Inside IR35 12 months Defence 1-2 days a month on site, Coventry, Barrow, Frimley or Weymouth Our complex platforms are increasingly driven by Software, assuring the quality of this and the proper integration is critical to our success. Software assurance is the ongoing process to ensure that software products meet and comply with software engineering, quality and safety standards. It is a systems engineering activity that that supports the achievement of functional and multiple non-functional requirements and is applicable to the whole engineering lifecycle from concept design to in service support. This is a growing role within our business and industry with significant potential for development and further growth. We expect the candidate to quickly develop an understanding of the development, use and control of software in our complex and unique application. Being actively involved in the decision making and problem resolution for some of the most critical aspects of our design. This opportunity offers a uniquely broad view of the programme, business and customer organisations which offers significant development both technically and personally. Working in the deployed Program software assurance team you will work with system designers and our suppliers to ensure the quality and reliability of the delivered products. You will ensure that the boat's safety and functional requirements are met and that risk is identified and managed. This responsibility breaks down into the following tasks. • Work with our customer to agree an acceptable approach to risk, • Plan and carry out software assurance activities including reviews of plans, processes, witnessing testing, inspections and auditing, • Review software plans, documentation and software aspects of system level plans and documents to provide timely and meaningful feedback, • Engaging with system designers, other engineering disciplines and software developers to in the design process to ensure that software meets requirements, • Document the level of risk, provide evidence and reporting for senior management, • Work with a range of stakeholders at all levels to resolve non-conformances and programme risks. Requirements and skills Experience Essential • There are large number of software types and includes programmable electronics. Detailed knowledge of all types is not required, but a good understanding of the principals of the software lifecycle and the application to other types of software is critical to the role., • Understanding of Systems engineering lifecycle and how this relates to software, • Experience of Software Assurance Methods and processes, including audit and review., • Understanding of the application of software engineering, security, quality and safety standards, • Problem Solving: The analysis and resolution of problems., • Writing of clear and concise reports with clear recommendations. Typically with software assurance there are no completely right answers. Often it deals with opinions. So it is critical to be able to clearly describe problems, its analysis and link it to recommendations., • Stakeholder management

Technical Services Manager £65,000, Mobile, National role. General Overview: Overall leadership of the provision of Technical Services including Mechanical, Electrical and HVAC Plant and equipment providing contractual and legal compliance, improving operational performance and energy efficiency. Provide Engineering Support to Facilities Managers. Be a Point of Contact for Account Management Teams for technical support and advice including best practice. Key Responsibilities • Maintain a PPM schedule that meets contractual and legal obligations based on SFG20 Guidelines and Manufacturers recommendations, • Support and advice Facilities Manager in the control of PPM activities., • Support and advice Facilities Manager in the management of remedial works o Quantify corrective actions o Validate Quotes o Review Method Statements o Provide support to FM through the duration of works • Manage and implement the Safe System of Works o Authorising Person for Electrical Works o Training and assessment of Competent Persons and Site Responsible Persons o Support FMs in management of SSoW and RAMS. • Lead and motivate the engineering team to improve performance on customer service, communication, networking, common engineering standards, quality, safety and environmental issues to ensure compliance with statutory, regulatory / corporate requirements and that documented procedures exist and are understood by all employees., • Lead the engineering team to deliver a safe, compliant, cost effective and responsive service, • Working with the engineering team to provide an efficient / cost effective management of all Suppliers which includes; lifts, building management controls and fire systems, • Contribute to plans and strategies for the future development of facilities., • Maximise the utilisation of the Technical Services team through training and coaching in order to minimise plant downtime and reliance on sub contractors., • Establish and maintain excellent working relationships based on open and honest communication with suppliers to ensure confidence in our business and to present a credible and professional image., • Ensure all work is carried out on all sites to an acceptable level and to consistent engineering and H & S standards through regular monitoring of both in-house and contractor performance and competence., • Develop, manage and co-ordinate a process to continually review Service Suppliers. Professional and personal competencies/qualifications Qualifications • Recognised qualification in an appropriate engineering subject., • Appointed Authorising Engineer or Authorised Persons for M&E disciplines., • Member of an appropriate technical institution (IET, CIBSE). Experience • Knowledge of building services/utilities, energy utilisation and procurement, business planning, and financial/budgetary controls, • 5 - 10 years experience of managing at a senior level a multi-disciplinary service to a complex facility incorporating maintenance and engineering., • Proven track record of achievement in a commercial, client-facing role., • Demonstrates experience of co-coordinating and managing Technical Services and good awareness of fit-out and H & S issues., • Ability to explore a situation, assess pro’s and con’s of different options and formulate a plan to meet objectives., • Able to think on their feet and change their approach as required., • Experience of formulating, implementing and managing change management programmes

About Plessey We’re building the hardware foundation for next-era computing. Plessey is a world-leading technology company driving the next generation of photonic devices and systems. With over 70 years of innovation, we combine research, materials science, process engineering, and manufacturing under one roof. We’re recognised as a global authority in microLED displays, optical computing, and optical interconnects. Join us to work on breakthrough technologies shaping the future of light-based technology and computing. Our values Lead We don’t follow industry trends; we create them, pushing boundaries and setting standards others aspire to. Every team member has the power to make decisions, drive change, and deliver excellence. We support each other, challenge one another for the best solutions, and lead by example. Together, we build industries and technologies that shape the future and scale toward our vision of the next era of computing. Grow We expand our capabilities every day — deepening our expertise, improving how we work, and pushing the boundaries of what’s possible. Curiosity fuels us: we question assumptions, explore new ideas, and innovate with light-based technologies. By investing in and empowering our people, we strengthen Plessey’s impact and help shape the future of optical technology. Trust We operate like a family—honest, reliable, and supportive. We have each other’s backs, own our actions, and uphold the highest standards of integrity and safety. We trust each other to deliver, our customers to challenge us, and our expertise to guide the way. Together, trust enables the collaboration essential for breakthrough innovation and lasting impact. Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role The Thin Film Ellipsometry Process Engineer is responsible for developing, optimising, and controlling thin-film optical measurement and characterisation processes to support high-yield, high-performance semiconductor device fabrication. This role focuses on ellipsometry-based metrology for deposited thin films across development and production environments. Key Responsibilities • Develop, qualify, and optimise ellipsometry measurement processes for thin films (thickness, refractive index n/k, composition, and uniformity)., • Support R&D and new materials development by providing accurate thin-film characterisation, measurement development, and data analysis., • Own and maintain ellipsometry process recipes, optical models, and control strategies., • Provide accurate metrology feedback to thin-film deposition processes (e.g., PVD, CVD, ALD)., • Analyse film properties including thickness mapping, optical constants, and process-induced variation., • Develop and refine optical models for multilayer thin-film stacks., • Utilise statistical process control (SPC) to monitor tool performance and process stability., • Conduct root cause analysis for measurement drift, model instability, or yield excursions related to film properties., • Collaborate with equipment and process engineering teams to maintain and improve metrology tool performance., • Support new product introduction (NPI) through film characterisation, DOE planning, and process transfer., • Generate technical reports and present findings to engineering and management teams., • Ensure compliance with safety and cleanroom protocols. Skills, Knowledge and Expertise • Bachelor’s or Master’s degree in Materials Science, Physics, Electrical Engineering, or related field., • 3–7+ years of experience in semiconductor or advanced thin-film processing environments., • Strong hands-on experience with spectroscopic ellipsometry., • Solid understanding of thin-film optics, dispersion modelling, and multilayer analysis., • Experience correlating ellipsometry data with complementary techniques (e.g., XRD, AFM, profilometry)., • Strong data analysis and problem-solving skills., • Strong ownership mentality with the ability to work independently in a fast-paced environment., • Adaptable and comfortable with evolving priorities and rapid change., • Excellent cross-functional collaboration skills (working effectively with process, equipment, R&D, and manufacturing teams)., • Clear and confident communicator, able to present technical findings to both technical and non-technical audiences., • Experience with compound semiconductor or dielectric thin films would be an advantage.

Commissioning Engineer Location Site-based role with travel to customer sites across the UK and potentially internationally as required. Job Summary An exciting opportunity has arisen for an experienced Commissioning Engineer to join a growing industrial engineering business delivering complex machinery and automation projects. This role is ideal for a strong electrically biased engineer with proven experience in PLC fault finding, commissioning and industrial automation systems. The successful candidate will be responsible for installing, commissioning and supporting a wide range of industrial machinery and systems on customer sites. Typical equipment may include conveyors, packaging machinery, automated production lines, process equipment, motors, drives, sensors, safety circuits and PLC-controlled systems. This is a site-based role and does not require regular travel to a central office location. Key Responsibilities for Commissioning Engineer • Carry out installation and commissioning of industrial machinery and automation systems., • Ensure all equipment is installed, tested and commissioned to the highest standards., • Work closely with customers to ensure systems meet technical and operational requirements., • Diagnose and fault-find on electrical, control and PLC systems., • Commission machinery including motors, drives, sensors, control panels and safety circuits., • Support commissioning of PLC-controlled systems, including Siemens, Allen Bradley, Rockwell or similar platforms., • Carry out fault finding on industrial communication networks, drives and associated equipment where required., • Create commissioning reports, technical documentation and completion records., • Manage commissioning activities in line with project schedules and deadlines., • Liaise with project management, design, production and service teams., • Support customers during testing, handover and post-installation activities. Candidate Requirements Qualifications • Electrical, Mechanical or Mechatronics qualification, or equivalent engineering background., • Electrical qualifications highly desirable. Experience • Proven experience as a Commissioning Engineer within industrial or manufacturing environments., • Strong electrical background with the ability to read and interpret electrical drawings and schematics., • Strong PLC fault-finding experience., • Experience with Siemens, Allen Bradley, Rockwell or similar PLC platforms., • Knowledge of motors, inverters, drives, sensors, relays, contactors and safety circuits., • Experience commissioning industrial machinery, automated systems or process equipment., • Understanding of industrial communication networks and automation systems advantageous., • Strong analytical and problem-solving skills., • Excellent communication and customer-facing skills., • Ability to work independently and as part of a wider engineering team., • Strong organisational and project management skills. Additional Information • Site-based role with travel to customer locations., • Opportunity to work on a wide range of industrial and automated machinery., • Strong opportunities for career development and progression.

Reporting to the Turbine Island Lead, the Senior Process Engineer shall be responsible for various Turbine Island design development activities. The Senior Process Engineer shall work closely with multi-disciplined teams and the supply chain to help deliver the Turbine Island design. Key Responsibilities: • Acting as an Intelligent Customer, take responsibility for acceptance of supplier deliverables, including challenge of design against requirements, • Development and review of Process Flow Diagrams, Piping and Instrumentation Diagrams, Layout Drawings, Component Sizing Calculations, Component and Equipment Datasheets and Specifications, and other concept or detailed design related documents, • Development and review of optioneering Studies or Decision Record Files, Design Descriptions, Requirement Specifications, among other design development activities, • Application of Systems Engineering, including development and review of Functional and Design Requirements, • Integration of Turbine Island design into wider power plant, • Act as technical support and point of contact for Turbine Island interface and stakeholder activities, • Attend and support Design Reviews and HAZID/HAZOP studies with multidiscipline teams, • Liaise with the project safety team on nuclear safety licensing, environmental planning /permitting, and other interface activities that are relevant to the Turbine Island scope, • Ensure adherence to the company statutory H&S Policies and rules and compliance with the project and Quality Management System Qualifications • Previous experience, in the nuclear sector or other highly regulated industries such as thermal power generation or oil and gas and process sectors. Experience and background in thermal power systems and equipment such as steam turbines, condensers, feedwater heaters, pumps, and piping systems., • Preferably with good experience in similar roles with specific emphasis on FEED through to detailed design and EPC delivery., • Development of procurement specifications and working with equipment suppliers., • Strong technical background and broad experience in thermal power or similar projects., • Excellent communication skills and ability to interact with internal and external stake holders., • Ability to identify and manage critical interfaces on major projects., • Good knowledge of UK Health and safety regulations, safety systems, HAZOP and engineering substantiation and technical standards., • Appreciation and application of ASME, European and UK codes and standards., • Systems Engineering experience or awareness desirable.

About the role: A leading engineering contractor client of mine are on the lookout for a Chief Engineer (Substation - HV Plant). This leading Tier One contractor in the T&D space work with regional, national and international electricity network owners and operators to provide technical engineering solutions across the full spectrum of the electricity grid, including overhead lines, cabling, substations and distribution networks. This is an exciting opportunity for a professional with UK transmission expertise and in-depth knowledge of National Grid and/or SSE technical specifications and procedures. As Chief Engineer, you'll play a key role in: • Providing technical leadership and guidance across the discipline., • Ensuring the quality and standards compliance of all deliverables., • Supporting the growth and competencies of our talented team. Package: • Salary - 80k-90k, • Package - Car or car allowance (£5400); Family private medical insurance; 10% bonus, • Location - Flexible: Various offices (hybrid) or remote considered Selected Key Accountabilities: • Ensure competencies of the technical staff working within the discipline., • Contribute towards the strategic direction for the discipline., • Drive a culture of innovation and value engineering within the discipline. Selected Key Responsibilities: • Support the team in understanding of client requirements, including those not captured in the contract, and the ability to influence contact specifications., • Closely collaborate with other Chief Engineers and Design Delivery Managers and promote collaboration within the discipline between the Designers and Technicians., • Work in close collaboration with the discipline Design Delivery Manager to ensure that the team’s technical competencies and expertise are developed and maintained., • Lead on any technical challenges affecting tender development and live projects and in doing so provide support to the relevant Design Delivery Manager., • Support the Lead Designer during tender development, particularly regarding risks and opportunities., • Support changes in process and technology proposed and undertaken by the Digital and Delivery teams., • Contribute to the development and updating of the design aids and computer programmes and assist in the analysis of new design concepts., • In conjunction with the lead project design engineer(s), help ensure that the discipline’s scope of work for each project is technically compliant with customer requirements, quality standards and safety by design principles., • Proactively support the discipline activities whether they are standalone or part of multidisciplinary Contracts., • Look to implement Engineering Excellence, Safety by Design and sustainability goals in everything we do., • Ensure that Manuals and Technical Procedures provided for compliance with the appropriate Quality and Safety standards are maintained and applied., • Support PDRs for discipline alongside the Design Delivery Manager. Key Skills and Experience: • Degree level education or equivalent with formal training in engineering., • Chartered Engineer (desirable, not essential) with professional body (e.g. ICE, IEEE or IStructE), • Strong, proven post-graduate experience in the engineering and design sector, • Strong, proven experience of the management of design works, • IT Literate (Microsoft Word, Microsoft Excel), • Extensive experience of technical design, • Experience of the power industry (preferred), • Experience working with National Grid / SSE would be a benefit

Aveni is redefining how financial institutions use AI. We build real, production-ready agentic systems that reshape how banks, advisers and financial services firms operate, replacing fragmented processes with intelligent, end-to-end workflows. We have been recognised as Fintech of the Year for two consecutive years and awarded Best Specialist Technology Service at the Professional Adviser Awards 2025. Backed by leading investors including Puma Private Equity, and commercially supported by Lloyds Banking Group and Nationwide Building Society, we previously completed one of Scotland’s largest Series A rounds. Since then, we’ve continued to grow rapidly as adoption of AI in financial services accelerates, and we’re now scaling our team to meet that demand. The Role We're hiring an Engineering Manager to lead and grow one of our engineering teams. This is a people first role for someone who is genuinely excited about the craft of leadership. You will own the performance, growth, and culture of your team, working closely with Product and Lead Engineer to create an environment of genuine ownership and high autonomy. This role requires a strong engineering background, not to own the technical direction, but to earn credibility, ask the right questions, and know when to step in. What You’ll Be Doing • Own performance, development, and progression of your team, • Own the individual performance and development of your direct reports, setting a high bar, giving honest feedback, and creating conditions for engineers to grow into real ownership., • Build a self-organised team, initially playing a facilitating role in ceremonies, with the explicit goal of no longer being needed to run the process., • Partner with Product on roadmap planning, making sure engineers understand the context behind the work, not just the tickets in front of them., • Own your team's delivery, keeping engineers unblocked, priorities clear, and commitments met., • Spot patterns in how your team operates, design better ways of working, and build the automation that powers those improvements., • Stay close enough to the codebase to spot friction, improve developer tooling, and engage credibly in technical discussions, without stepping onto the critical path., • Drive hiring alongside our Recruitment team, contributing to interview process design, and a high-quality candidate experience., • Set the cultural expectation around AI coding tools, building team-wide norms for responsible, high-quality AI-assisted engineering. What We’re Looking For • Extensive experience in software engineering, with genuine hands-on technical experience. You know what good code looks like and can get into the details when it matters., • Proven experience as an Engineering Manager or Team Lead, with real ownership of individual performance and team culture., • A track record of building high-trust, high-autonomy teams, not teams that work because of you, but teams that work because of the environment you built., • Good understanding of Node.js or Python, and React. Enough to have credible technical conversations, review code, and debug issues alongside your team., • Experience with Agile/Scrum, and a track record of improving how teams deliver, not just following a process., • Genuine excitement about AI coding tools. You use them yourself, you help your team use them well, and you stay current on what's emerging., • You enjoy management and leadership problems. Growing and unblocking people, building the processes and frameworks that make the team better. These are things you actively want to do. Why Aveni • We're building AI systems for a sector where trust and safety genuinely matter and we take that seriously in how we engineer., • High-trust, high-autonomy culture: we give engineers real ownership and expect them to use it., • AI-native engineering culture. We use AI tools across the full software lifecycle and expect our engineering leaders to lead from the front., • High-growth fintech at an exciting moment. New products launching, the team scaling, and the chance to shape how engineering works at Aveni for years to come. Join Us in Making a Difference At Aveni, we believe that diversity drives innovation. We’ve built our business to ensure an inclusive workplace where everyone feels valued and empowered to contribute their best work. If you’re passionate about technology and its ability to drive positive change for the future of financial services, we’d love to hear from you. Even if you don’t meet 100% of requirements, we’d like to hear from you anyway if you believe you’d fit in. Apply now to join us on our mission to transform the financial services industry through AI. Benefits at Aveni. What you’ll love: • We’re a remote-first company across the UK, with regular off-sites and in-person gatherings that are always fun, motivating and team-focused., • Work abroad policy, • Co-working spaces available, • 34 days holiday (including flexible bank holidays) and your birthday off, • Company-wide off-sites, • Optional Personal Development Plan, • Flexible benefits platform, • Protection essentials including Life Insurance, Income Protection, Critical Illness cover, and Pension (up to 5% matched employer contribution with optional increased contributions), • Private health and dental care, • Potential share options, • Enhanced family leave

FuzeHR is now hiring a Service Technician/Service Engineer based in the UK! This is an exciting opportunity to join a highly successful business in the mining/mineral processing equipment space. The successful Service Engineer will provide post sales service, commissioning, and client support for company supplied equipment in domestic and international locations. No need to report into an office or shop daily, this is a fully remote opportunity involving work on customer sites & from home. Apply today! What are the Perks? • Competitive compensation (dependent on experience and qualifications)!, • M-F, day shift schedule with minimal requirement to work evening or weekends, • Work from home while not servicing customer equipment! What are the Responsibilities? • Post-sales support, including client follow-up and training, • Identify issues in the field and resolve them; look for areas of improvement; bring forward ideas or solutions, • Write service reports and commissioning checklists upon trip completion, • Create procedures, instructions, reports, training information which may include manuals, PowerPoint, and videos, • Act as a content expert for Technical Writing department; support their development of manuals, procedures and documentation, • Follow-up on action items identified during commissioning or service trips, • Assist with Falcon SB bowl refurbishment program; generate reports for the Parts Team, help coordinate and support work processes, • Assist with larger projects including assembly, teardown and coordination; lead and direct a third party vendor to fabricate and assemble company equipment, • Assist with shop assembly when resources require it; this may be in Perth, Langley, Montreal, or at an international vendor, • Assist QA department with quality inspections, • Handle warranty claims; disposition and needed actions to see process to completion using new procedures, • Test company equipment after assembly; follow FAT (factory acceptance test) steps; bring forward any concerns and ensure corrections, • Assist with spare parts orders (packing, picking, communication with Langley, etc.); aid with annual inventory count; aid other company departments (Quality, Procurement, etc.) if local support is required What are the Requirements? • Good mechanical knowledge or mechanical aptitude; follows company and client safety protocols; best practices; follows procedures; ability to follow directions; continued growth and development, • Experience with equipment commissioning and service, • Experience with analysing and troubleshooting machinery both mechanically and electrically (Low Voltage), • Able to read, follow, and understand mechanical (assembly) and electrical drawings, • Clear communication with clients and peers on equipment installation, operation, maintenance, and repair, • Understand how to see a job through and adjust your schedule to suit the task at hand, • Demonstrates personal leadership; looks to develop and stays up to date with required training including but not limited to White Card, Senior first aid, HSR, electrical safety, mineral processing, automation, • Use and understand various Automation software; be able to clearly understand directions if being instructed on a program change, • Proficient in MS Word, Excel, PowerPoint and Adobe Acrobat or other PDF editors, • Able and willing to travel domestically and internationally on short notice and up to 50% of the time. Destinations may be underdeveloped, • Hold a valid Australian passport and maintain good standing, • When working onsite, able to match client hours which may require working 10-12 hour shifts, • Flexible with work/personal life balance to communicate with Langley head office at inconvenient times due to the time difference Bonus Points • Millwright (apprentice program), • Electrician (apprentice program), • Mineral Processing or mine experience, • Multiple languages Personal Attributes • Self-starter, proactive and motivated, • Ability to deliver under pressure or in uncomfortable conditions, • Dependable, trustworthy, accountable; owns mistakes and learns from them, • Works well both independently and with others in a team, • Able to accept and grow from constructive criticism, • Well organized and able to prioritize activities, • Confident in making decisions, some of which may not be well received; diplomatic approach to ensure work gets done, • Ability to recognize when to ask for help, • Flexible to work in a small/medium-sized business

We are supporting a large pharmaceutical client who are looking for a Process SME to help support a large expansion project. They are looking for a technically sounds Process Engineer with experience through the entire design life cycle, from concept through to detailed design. You need to be able too: • Define technical requirements, • Collaborate with designers, suppliers and work package owners, • Identify gaps and address risks, • Conduct design assurance, compliance and safety reviews. We are looking for someone with experience in the following areas: • Supported a greenfield project, • Experience with chemical API manufacturing, • Proven record in the design stages., • You must have pharmaceutical experience, • Experience with modular builds is advantageous.

Civil Engineer or Civil Design Engineer Water Sector Flexible location - Birmingham, Glasgow, Chester, Redhill, Swansea, Bradford, Wiltshire, Leeds Contract or staff CIVIL ENGINEER JOB SPEC About the Role Typically, you will organise and/or undertake civil engineering activities within multi-disciplinary teams, whilst potentially supporting and mentoring more junior engineers. The role involves responsibility for: • undertaking strategic studies, feasibility work, outline and detailed designs for a wide variety of water utilities projects including water and wastewater treatment, conveyance and reservoir dam safety,, • producing calculations and reports to support those designs,, • working directly with clients to understand their needs and develop solutions to their problems,, • producing business cases and proposals to enable our clients to fund their projects,, • working with our construction partners to improve safety of designs and understand and improve the construction process,, • ensuring our designs take account of buildability, sustainability, H&S and environmental requirements About You • Approaching or at Chartered or Incorporated Engineer status with the Institution of Civil Engineers or another relevant institution., • Previous experience in the water sector is not essential, we would look for technical skills transferrable to a civil engineering role in the water sector., • Desire to support and mentor more junior engineers towards achieving Chartered or Incorporated Engineer status., • Excellent written and verbal communications skills., • Self-motivated and effective team player. CIVIL DESIGN ENGINEER ROLE Key Responsibilities: • Provide guidance and direction on department design guides, standards, systems and applicable engineering codes and standards., • Preparing calculations and develop civil engineering deliverables (models, drawings and reports) whilst adhering to project budgets, schedules and quality systems., • Providing guidance to others and support continuous improvement, • Coordinate with internal and external team members on complex projects, • Prepare a variety of complex civil engineering deliverables for large or multiple projects., • Develop recommendations for materials and construction techniques., • Develop specifications for the identification, collection and management of data for engineering work., • Serve as a technical specialist and use knowledge and skill set to provide advice and guidance to project teams., • Mentor and develop junior staff, • Be fully conversant and comply with all aspects of health & safety duties of Designers Person Specification: • Civil Engineering Design and/or Hydraulics/Structural background, • Experience in design and build, • Knowledge & Experience in the design and checking of non-infrastructure water/wastewater treatment works design, • Ability to lead and manage a team of civil engineers and associated specialists (structural, geotechnical and hydraulics) and to interface with other disciplines in the production of engineering deliverables

Role: Principal Civil/Structural Engineer Location: Devonport(Occasional site visit) Duration: 12 months(Long term - project goes until Dec 2028) Inside IR35 The role We are looking for a Principal Civil/Structural Engineer ‎to support delivery of civil/structural subway systems as part of the subways Team in Devonport. Lead on the Structural / Civil works required for: • Refurbishment design proposals for the existing extant subways within the 10D site. Day-to-day, you’ll be supporting the engineering capability of the new systems through the design lifecycle in accordance with the design process. Key responsibilities will include: • Lead and manage one or more technical design packages ensuring requirements are met through the design process, • Provide technical design guidance and review of sub-contract design to ensure compliance with specifications, technical regulations and standards, • Collaboration across engineering functions and stakeholders to integrate designs within the overall facility layout and manage interfaces, • Maintaining the engineering configuration of the design intent (change control) Essential experience: • Design of high complex services subways/routes preferably in a Nuclear/ Regulated environment, • Regulations, legislation and standards that are applicable to civil/structural design and construction (including Principal Designer responsibilities under CDM), • Substantiation of SFR’s when identified within systems to support the nuclear safety case, • Able to demonstrate relevant knowledge and skills required in the technical management of complex design development throughout the design lifecycle., • Provide expert advice to the sub-contracted design houses to enable them to develop the design., • Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements., • Experience of working in BIM environments., • Awareness of project planning, project management and budgeting., • Sound understanding of company and departmental procedures relating to Design, Health & Safety and Quality requirements and ability to manage projects in accordance with these procedures., • Collaborate with other design houses regarding the proposed works and the required changes to the subways to facilitate their designs., • Support development and lead implementation of assurance and governance activities for subway remedial works and new design development Qualifications • Degree in Civil/Structural Engineering., • Chartered Engineer with membership of an accredited body (i.e. ICE) or working towards chartered status. Or significant experience. Due to the nature of the work carried out at our client’s site, these roles are subject to specific nationality requirements and are only open to sole British citizens. Candidates who meet this criterion will also be required to undergo security clearance vetting.

BAM Infrastructure is currently recruiting for a 4D Modeler to join our Digital Project Solutions team. Reporting to the Head of Project Delivery & Digital Engineering within a matrix structure, the role will be responsible for producing and developing high-quality 4D planning outputs that integrate construction sequencing with the federated 3D model. The 4D Modeler will create detailed simulations, programme-linked visualisations, and construction rehearsals that support safe, efficient, and predictable project delivery. Working closely with planners, engineers, and wider project teams, the role will ensure the accuracy, clarity, and technical robustness of 4D models, supporting both tender-stage methodologies and live project planning. Your team • This role is predominantly remote, with occasional travel to Scotland (typically up to twice per month).Making Possible, • Develop high-level and detailed 4D models using Fuzor and Synchro 4D which are linked to the P6 programme, ensuring accurate sequencing and logic., • Coordinate with planners to align the 3D model with the latest programme updates, identifying clashes, sequencing issues or constructability risks., • Produce 4D visualisations, simulations and digital rehearsals to support health & safety reviews, logistics planning, and stakeholder communication., • Validate construction methodology through 4D (temporary works, access, lifting operations, interfaces, phasing)., • Maintain and update 4D models throughout the project lifecycle, ensuring accuracy of planned vs actual where required., • Support RAMS, site briefings and toolbox talks by preparing clear 4D sequences for critical/high-risk activities., • Assist in ensuring that the models are suitable for achieving the goals, objectives and targets, • described in the BIM Execution Plan or Project requirements., • Assist in ensuring that the building information data quality (graphical and non-graphical) and the, • level of information need are accurate, and the right information is delivered to the, • client/appointing party., • Support in generating the digital engineering output in accordance with the projects methods and, • procedures., • Be open to receiving support other production personnel as and when required., • Share knowledge and solutions related to technical workflows with co-modelers., • Capture best practices, workflows, lessons learned and communicate it within the project and, • wider team., • Communicate effectively with all the stakeholders including supply chain regarding the, • requirements of the Digital engineering output., • Assist operational delivery in aligning with current digital engineering best practice guidance, • coming from the DPS Centres of Excellence (COEs)., • Contribute to best practice guidance in the DPS Centres of Excellence (COEs)., • Deliver to a high standard in accordance with the agreed project scope.What do you bring to the role?, • Educational/experience background: Technical education or 1-2 years' experience in, • Construction or related fields, • 1-2 years experience working on construction projects in digital domain., • Knowledge of BIM coordination process is beneficial but not mandatory., • Ability to work in a team environment., • Ability to use time productively, maximise efficiency and meet challenging work goals., • Good communication skills (written and verbal)., • Must be a self-starter and possess the drive to pursue continued education on digital, • technologies., • Must be attentive to the details and assure that their digital engineering outputs are checked, • thoroughly before sharing with others, • Must hold a satisfactory level of technical competency relating to construction project technology focused specifically on 4D modelling and one or more of the below:, • 2D/3D Information Production, • 2D/3D Information Coordination, • Visualisation, • Planning & Scheduling, • Commercial, • BIM for Sustainability, • BIM for FM Operations (digital twins & AIMs), • MMC and DFMAWhats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day Not sure what skills you will need for this opportunity Simply read the full description below to get a complete picture of candidate requirements. We strive to create an environment where everybody feels welcome and valued. xrnqpay Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.

We are looking to strengthen our Engineering team with a Design Manager based at our Derby office with hybrid working available. Increase your chances of reaching the interview stage by reading the complete job description and applying promptly. You will report directly to the Regional Discipline Lead (RDL) - Design Management and your role will lead projects through their design phases for a portfolio of projects. To ensure cost-effective, technically compliant, and buildable solutions are delivered in line with all stakeholder requirements, as well as in line with programme expectations and in accordance with the project delivery process and engineering design procedures. Key responsibilities: Be committed to excellence in Health & Safety (H&S) in design, complying fully with relevant local specifications, codes, rules, regulations and requirements and all relevant H&S legislation. To ensure that H&S hazards are identified and managed and that all residual risks are communicated effectively to all stakeholders. To lead the Design team in delivery of their responsibilities and to ensure a focused approach to meet customer requirements and project objectives. To be accountable for the expenditure, drive efficiency and manage the overall outturn costs for design by producing design deliverables within the allocated resource hours and by key dates. To organise all elements of design, documenting it in the Design Management Plan and preparing monthly status update reports as necessary. To attend and contribute to all relevant programme, project, and technical meetings. To ensure that the technical solution is produced to outperform on costs, whilst maintaining quality standards and delivery on time. To provide, where required, technical support during construction, assembly, and commissioning stages. To ensure that all technical work is undertaken to the correct standards and specifications, following the appropriate systems of work and quality assurance. To contribute to achieving sustainability targets, particularly by reducing embodied and operational Carbon Footprints of solutions. To communicate and work effectively with people from other partner organisations, backgrounds, and disciplines, utilising their knowledge and experience and add to this with your own experience and knowhow. To recognise and provide exceptional customer service both internally and with partners and externally with the client, their customers, and the general public. Represent the whole of the business in all client contacts and promote the reputation. Maintain a positive and solution-oriented approach to work, providing open and honest feedback. Undertake such other duties, training and/or hours of work as may be reasonably required, and which are consistent with the general level of responsibility of this role. In all internal and external contact, present a professional and positive image as well as maintaining mutually constructive, positive and beneficial relationships. Take all reasonable steps to ensure appropriate confidentiality. About The Candidate: Essential: Extensive experience of multi-disciplinary design management, in a design-build environment. Degree in an engineering-related discipline. Chartered Engineer in an engineering-related discipline or be close to achieving this. APM Project Fundamentals Qualification. Must be delivery-driven with the ability to set targets and manage and motivate multi-disciplinary teams to deliver to time, cost and quality objectives. Working knowledge of CDM regulations and construction Health & Safety. Extensive experience in large-scale project delivery. Strategic, operational, technical and management skills. Good general knowledge of all aspects of water treatment e.g., related process, civil and MEICA engineering aspects. Ability to present technical proposals clearly, confidently, and convincingly. Desirable Working towards or have obtain APM Project Management Qualification. Experience of working for a global organisation. Experience of working with remote/dispersed teams. Experience in the Water/Wastewater Treatment Industry. Ability to embrace collaborative and innovative working. xrnqpay Knowledge of BIM procedures and techniques. What we offer Packages include - A competitive salary Hybrid Working (Jobs needs dependent) Car/car allowance (Jobs needs dependent) 25 days holiday + Bank Holidays (with an additional 5 days available to buy) Contribution Pension scheme Life Assurance Health Insurance Private Medical Insurance And many more benefits including - cycle to work scheme, discounts and savings Hub, Kids Pass etc Other Information

About Plessey We’re building the hardware foundation for next-era computing. Plessey is a world-leading technology company driving the next generation of photonic devices and systems. With over 70 years of innovation, we combine research, materials science, process engineering, and manufacturing under one roof. We’re recognised as a global authority in microLED displays, optical computing, and optical interconnects. Join us to work on breakthrough technologies shaping the future of light-based technology and computing. Lead We don’t follow industry trends; we create them, pushing boundaries and setting standards others aspire to. Every team member has the power to make decisions, drive change, and deliver excellence. We support each other, challenge one another for the best solutions, and lead by example. Together, we build industries and technologies that shape the future and scale toward our vision of the next era of computing. Grow We expand our capabilities every day — deepening our expertise, improving how we work, and pushing the boundaries of what’s possible. Curiosity fuels us: we question assumptions, explore new ideas, and innovate with light-based technologies. By investing in and empowering our people, we strengthen Plessey’s impact and help shape the future of optical technology. Trust We operate like a family—honest, reliable, and supportive. We have each other’s backs, own our actions, and uphold the highest standards of integrity and safety. We trust each other to deliver, our customers to challenge us, and our expertise to guide the way. Together, trust enables the collaboration essential for breakthrough innovation and lasting impact. Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role We are looking for an experienced Test Development Engineer to join our team. In this role, you will work with advanced test equipment, helping to develop and improve innovative testing solutions. If you are passionate about test development, enjoy solving complex problems, and want to work with cutting-edge technology, we would love to hear from you. Key Responsibilities • Implement and maintain digital and mixed-signal test solutions., • Specify hardware required for testing such as probecards, interface boards etc., • Develop and optimise test programs for complex devices using Teradyne Ultraflex., • Perform test program, Test HW characterization over temperature (Ex. Shmoo analysis), GRR, Correlation, setup calibration and product qualification., • Drive and perform the Repeatability and Reproducibility Studies which are necessary to transfer a test solution from an in-house development site or from other development sites to a full manufacturing high volume setup., • Define and release procedures for all aspects of test program development (e.g. test program release, test coding guidelines etc)., • Release and support test programs for production., • Collaborate with key stakeholders to ensure on time delivery test coverage and quality., • Work with stakeholders to identify and implement test process improvements. Skills, Knowledge and Expertise • Significant experience in test development within mixed-signal environments, encompassing both analog and digital system validation., • Strong programming skills ( VBA, Python)., • Understanding of digital and analog test principles., • Problem-solving and analytical skills., • Experience with GRR and test program release processes including data analysis software (eg. JMP, Examinator). Advantage • Mixed-signal testing expertises., • Experience with Teradyne Ultraflex., • uLED and /or display panel testing expertise., • Knowledge of Teradyne IRIS100S systems., • Knowledge of semiconductor manufacturing and test flows., • Knowledge of TEL probers., • Expertise with test program control such as git.

Here at Pick Everard, we are passionate about creating a prosperous and sustainable future, taking a fresh perspective on the built environment. Our core values of professionalism, compassion, drive and positivity are at the heart of everything we do. Do you have experience of working across sectors in a multi-disciplinary environment? Do you want to work within a collaborative, dynamic environment, with a team of highly skilled and like-minded professionals? If you answered yes to the above questions, we want to hear from you! Be part of our dynamic and forward-thinking team as a Senior Civil Engineer in our thriving, well-established Leicester office, where collaboration and innovation drive everything we do. As a vital member of the team, you'll contribute to the successful delivery of a wide range of of Infrastructure projects—including Residential, Custodial, Healthcare, Education, Ministry of Justice, Commercial, and Leisure developments. You will need to be eligible to achieve SC clearance. At Pick Everard, 'infrastructure' means so much more than just roads. We're looking for someone with a variety of experience across multiple elements of the built environment, including buildings, drainage systems, pavements and pathways and car parks. Roads and highways are useful and beneficial, but you'll work across many more elements of infrastructure than just roads. Joining a supportive network as part of a national team, you can expect to receive valuable training, guidance and genuine scope for career development. Your core responsibilities will include: • Produce technical designs, specifications, and reports for a wide range of projects varying in size, type, and complexity., • Collaborate on both single-discipline and multi-disciplinary projects., • Contribute to business growth by maintaining and developing strong client and partner relationships., • Assist senior leadership in achieving business objectives and successful project delivery., • Compliance with Health and Safety requirements, practices and procedures., • Degree in Civil Engineering or related field; working towards or holding IEng/CEng (ICE)., • Be eligible to achieve SC clearance., • Experience delivering infrastructure and bespoke projects, with a flexible approach willing to take on a range of schemes., • Proficient in industry-standard design software., • Strong communication skills and a positive, team-oriented attitude; able to lead and support teams., • Confident in client liaison and building relationships across disciplines and external teams., • Knowledge of construction contracts and appointment forms., • Engaged in CPD with a drive for continuous professional development., • Strong problem-solving skills with ownership of tasks., • Experience writing and presenting reports, contributing to bids and work winning. Our nationwide multidisciplinary team of 780+ employees, work collaboratively to deliver outstanding places and spaces that create lasting value for local communities. Through our remarkable history we have established the sound principles of success, and we have the vision and ambition to be even better. We’re committed to creating sustainable communities where everyone feels safe, cared for and valued. We achieve that by encouraging a diverse, welcoming workplace for our people, clients and colleagues. We care about our people and improving our society and that means supporting your ambitions and interests at every level. We will provide you with an inspiring environment in which you will be able to drive real progress and impact in your career. What we offer Providing a balanced, enjoyable career is important to us, and we work hard to make sure everyone feels a valued part of our organisation. You will receive an attractive salary, and amongst other benefits you can also expect: • Agile working., • Career and Professional Development., • Corporate Social Responsibility opportunities., • 26 days’ annual leave + Bank Holidays + option to buy up to 5 days’ additional leave., • Private healthcare, life assurance and healthcare cash plan., • Stakeholder pension., • Professional subscriptions., • Employee Discount Scheme., • Eyecare Scheme. As an equal opportunities’ employer, Pick Everard is committed to the equal treatment of all current and prospective employees and does not condone discrimination on the basis of age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership. We aspire to have a diverse and inclusive workplace and strongly encourage suitably qualified applicants from a wide range of backgrounds to apply and join us on our journey. Accessibility We’re committed to helping you perform at your best throughout the recruitment process. If you have a disability or require any adjustments to support your application or interview, please get in touch with us at We’ll be happy to discuss how we can assist you. Agencies We are committed to building and nurturing great relationships with our agency partners. However, this role is being recruited for directly and therefore we are not seeking support at this time. Any unsolicited CV Introductions will not be accepted. #LI-Hybrid #LI-WB1

Position: Principal Civil Engineer You could be just the right applicant for this job Read all associated information and make sure to apply. Location: Derby (Hybrid Working) Salary Guide: £70,000 - £80,000 Plus Bonus, Car/Allowance & Excellent Package Our client is a Tier 1 D&B Contractor operating predominantly in the water industry who have been awarded a programme of work to deliver non-infrastructure water and wastewater projects for Severn Trent Water and they are recruiting for a Principal Civil Engineer to help deliver these projects. You will report to the Civil Engineering Discipline Lead and your role will be to provide superior quality Engineering Design services to allow the company to minimise risks and maximise profits on turnkey and engineering services contracts. In order to ensure the above will co-ordinate the design and produce design documents and drawings taking due account of health and safety requirements, specifications and standards pertaining to the contract. Key responsibilities will include: • Produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. To be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines., • Ensure that standard practices are utilised where ever possible., • Provide estimates and feedback for Proposals department, • Assist in developing, monitor and review the procedures and processes, • Write, update and monitor efficient procedures to aid the smooth running of the department., • Ensure co-ordination of designs with all other disciplines internal and external in order to ensure that the design processes carried out on the contract are co-ordinated for the benefit of the contract as a whole., • To work within a culture where satisfying the customer is recognised as the key to achieving other objectives, and that customers include everyone receiving benefit from our processes, whether end users or other departments within the company. xwwtmva, • Assist in supervising and developing staff, as well as mentoring staff (Delegated Engineer for ICE), • Assist in ensuring a safe working environment for all staff, • Ensure designs take account of environmental issues, • Strong understanding of the principles of water and sewage treatment, • Chartered or Incorporated Member of ICE or IStructE, • Experience of managing members of staff in designing relevant discipline aspects of water and sewage treatment plants, • Membership of a professional institution/Chartered Engineer, • Relevant discipline Engineering degree, • Ability to rationalise designs and produce economic plant layouts, • Good general knowledge of all aspects of water treatment, e.g. mechanical engineering, process engineering, electrical engineering and project management, • A flexible mind, with the ability to assimilate large amounts of different data at one time, • Ability to present technical proposals clearly, confidently and convincingly, • Computer literacy

We are looking to strengthen our engineering team with a Principal Civil Engineer based at Derby with hybrid working available, on either a freelance or permanent basis. If you think you are the right match for the following opportunity, apply after reading the complete description. You will report directly to the Regional Discipline Lead and your role will be to provide superior quality Engineering Design services to allow the company to minimise risks and maximise profits on turnkey and engineering services contracts. In order to ensure the above the individual must co-ordinate the design and produce design documents and drawings taking due account of health and safety requirements, specifications and standards pertaining to the contract. Key responsibilities will include: Produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term 'cost' is to embrace all costs associated with the design and the subsequent construction of the design. To be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines. Ensure that standard practices are utilised where ever possible. Maintain competitiveness Provide estimates and feedback for Proposals department Work to procedures and processes to ensure the continuing development of the department Assist in developing procedures and processes Monitor and review the procedures and processes Write, update and monitor efficient procedures to aid the smooth running of the department. Ensure co-ordination of designs with all other disciplines internal and external in order to ensure that the design processes carried out on the contract are co-ordinated for the benefit of the contract as a whole. Maintain files and records throughout the duration of contracts. Assure customer satisfaction To work within a culture where satisfying the customer is recognised as the key to achieving other objectives, and that customers include everyone receiving benefit from our processes, whether end users or other departments within the company. Maintain a personal development plan Assist in supervising and developing staff Assist in ensuring a safe working environment for all staff Reduce waste to a minimum from all departmental activities Ensure designs take account of environmental issues Ensure that design takes full regard of all health and safety requirements. Mentoring staff (Delegated Engineer for ICE) Line Management of staff About The Candidate: Essential Strong understanding of the principles of water and sewage treatment. Chartered or Incorporated Member of ICE or IStructE. xrnqpay 10+ years experience Have experience of managing members of staff in designing relevant discipline aspects of water and sewage treatment plants Membership of a professional institution / chartered Relevant discipline Engineering degree Ability to rationalise designs and produce economic plant layouts Good general knowledge of all aspects of water treatment, e.g. mechanical engineering, process engineering, electrical engineering and project management A flexible mind, with the ability to assimilate large amounts of different data at one time Ability to present technical proposals clearly, confidently and convincingly Computer literacy Driving license What we offer Packages include - A competitive salary or rate Hybrid Working?(Jobs needs dependent) Car/car allowance (Jobs needs dependent) 25 days holiday + Bank Holidays (with an additional 5 days available to buy) Contribution Pension scheme Life Assurance Health Insurance Private Medical Insurance And many more benefits including - cycle to work scheme, discounts and savings Hub, Kids Pass etc

Project Engineer - Solar PV Projects Location: 100% Remote Employment: Contract Duration: 9 Months Role Purpose The Project Engineer is responsible for the technical development, design, and execution of solar PV projects, both Behind-the-Meter (BtM) and Grid Connected (GC) across all project stages. This role ensures that projects are engineered to meet performance, safety, and quality standards, supporting the organization’s mission to deliver reliable, efficient, and innovative renewable energy solutions. 1. Project Engineering Across All Stages Development Stage: • Provide technical input for site assessments, feasibility studies, and conceptual designs., • Support the preparation of technical documentation for permitting and grid connection applications., • Collaborate with development, commercial, and external partners to optimize project layouts and technology selection. Design Stage: • Lead the review of the detailed engineering design performed by third parties, including electrical, mechanical, civil, and communication aspects., • Coordinate with internal and external designers/advisors, ensuring compliance with codes, standards, and best practices., • Prepare and review technical specifications, drawings, and BoQs for procurement and construction. Execution Stage: • Provide technical support during procurement, construction, and commissioning., • Review and approve contractor submittals, manage technical queries, and resolve site issues., • Ensure quality control and compliance with design intent throughout construction and handover. 2. Continuous Improvement & Knowledge Sharing • Capture lessons learned and contribute to the development of engineering standards and templates., • Support innovation and the adoption of new technologies and processes. Key Interfaces: • Procurement & Construction, • Site Development, • Investment, • Revenue, • BTM Sales, • External consultants, contractors and regulatory authorities, • Asset Management Goals & KPIs • Successful delivery of project engineering deliverables on time and within budget., • Achievement of project performance, safety, and quality targets., • Positive feedback from internal and external stakeholders., • Contribution to set up the technical function across the company through process improvements and knowledge sharing. Qualification criteria • Degree in Engineering (Electrical, Civil, Mechanical, or related field), • +3 years of experience in solar PV project engineering (BtM and/or Grid Connected), • Proficient in PVSyst and CAD software such as AutoCAD, BricsCAD, PVCase, etc., • Must have worked on similar UK solar PV projects., • Experience with BESS will be positively considered., • Familiarity with relevant codes, standards, and permitting processes., • English fluent is mandatory; other languages such as Swedish or Spanish are desirable., • Strong communication and teamwork skills.

About Plessey We’re building the hardware foundation for next-era computing. Plessey is a world-leading technology company driving the next generation of photonic devices and systems. With over 70 years of innovation, we combine research, materials science, process engineering, and manufacturing under one roof. We’re recognised as a global authority in microLED displays, optical computing, and optical interconnects. Join us to work on breakthrough technologies shaping the future of light-based technology and computing. Lead We don’t follow industry trends; we create them, pushing boundaries and setting standards others aspire to. Every team member has the power to make decisions, drive change, and deliver excellence. We support each other, challenge one another for the best solutions, and lead by example. Together, we build industries and technologies that shape the future and scale toward our vision of the next era of computing. Grow We expand our capabilities every day — deepening our expertise, improving how we work, and pushing the boundaries of what’s possible. Curiosity fuels us: we question assumptions, explore new ideas, and innovate with light-based technologies. By investing in and empowering our people, we strengthen Plessey’s impact and help shape the future of optical technology. Trust We operate like a family—honest, reliable, and supportive. We have each other’s backs, own our actions, and uphold the highest standards of integrity and safety. We trust each other to deliver, our customers to challenge us, and our expertise to guide the way. Together, trust enables the collaboration essential for breakthrough innovation and lasting impact. Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role We are looking for a Senior Software Engineer to support the development of automated reliability and characterisation test systems for MicroLED devices. The role combines test software development, instrument control, and data analysis, supporting both the execution of reliability campaigns and the analysis of device performance and degradation. The engineer will work closely with hardware engineers and test engineers to develop software tools that control laboratory equipment, automate test procedures, and analyse large datasets generated during device testing. Key Responsibilities • Develop and maintain automated test software for reliability and characterisation systems., • Interface with laboratory instruments and test hardware using LabVIEW, C++, and Python., • Support the execution of device reliability campaigns and engineering experiments., • Develop tools for data collection, processing, and analysis., • Work with engineering teams to interpret results and identify device behaviour trends., • Contribute to improving the automation and robustness of internal test platforms. Skills, Knowledge and Expertise • Master’s degree in Physics, Electronic Engineering, or a related discipline., • Proficiency in LabVIEW and C++., • Working knowledge of Python for data processing and analysis., • Hands-on experience with communication protocols such as SPI and I²C., • Experience working with laboratory bench instruments such as power supply units (PSUs), oscilloscopes, pattern generators and multimeters., • Strong analytical mindset with attention to detail., • Ability to work independently with minimal supervision. Advantage • Experience with NI TestStand for automated test environments., • Background or practical experience in semiconductor device testing., • Experience analysing large datasets and developing mathematical models for device behaviour and degradation., • Familiarity with reliability testing methodologies (e.g., lifetime or stress testing).

Senior EICA Engineer Ready to make your application Please do read through the description at least once before clicking on Apply. Contract or Staff Derby (Hybrid working with regular site visits) Our Client has a requirement for a Senior EICA Engineer, who will be required to work on a staff basis in Derby. Role Purpose: To deliver high-quality, cost-effective engineering design solutions across water and sewage treatment projects, ensuring compliance with specifications, health & safety standards, and project requirements. The role also involves coordinating multidisciplinary design activities to support successful project delivery. Job Role Responsibilities: • Produce cost-effective design layouts considering full lifecycle costs (design, materials, construction, commissioning), • Deliver and coordinate engineering design documentation and drawings, • Ensure use of standard practices to maintain efficiency and competitiveness, • Provide technical input and estimates to the Proposals team, • Develop, maintain, and improve departmental procedures and processes, • Coordinate designs across internal and external disciplines, • Maintain accurate project documentation and records, • Support and drive customer satisfaction, • Assist in the supervision and development of junior engineers, • Promote and ensure health, safety, and environmental compliance in all designs, • Strong understanding of water and sewage treatment processes, • Experience managing or mentoring engineers within a design environment, • Degree or HND in a relevant engineering discipline (with significant experience), • Professionally qualified (Chartered or working towards), • Ability to produce efficient and economical design solutions, • Broad technical knowledge across mechanical, electrical, and process engineering, • Strong analytical and problem-solving skills, • Ability to present technical information clearly and confidently, • Good IT skills, • Chartered Engineer status At First Recruitment Group we understand just how important it is to secure the right people. That is why our Recruitment Consultants always take the time to understand requirements in detail and offer sound advice to both clients and candidates. xwwtmva We actively recruit at all levels and this is a superb opportunity for a Senior EICA Engineer looking for new employment.

ABOUT YOU Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. As the Certification Engineer, you will have strong analytical skills, enabling you to review technical documentation, make sound engineering judgements, and support certification decisions. Organised and detail-oriented, you can manage multiple projects while collaborating effectively with colleagues and clients. Required skills and experience: • Degree in electrical engineering or equivalent in terms of education, experience, or training., • Experience in testing and/or certification of electrical products., • Experience with switchgear and control gear products and standards (IEC 61439 series)., • Ability to make sound engineering judgements based on relevant professional experience., • Ability to scrutinise and compare technical documents., • Good IT literacy skills (Microsoft Office). ABOUT THE OPPORTUNITY As the Certification Engineer you will help coordinate the company's product certification activities and take an active role in the product certification process for our ASTA certification schemes. Key activities: • Conducting certification activities (Recommendation and Certification Decision) for all schemes., • Preparation, review and authorisation of test programmes., • Creation and checking of certificates and technical reports., • Assessment of laboratories to ISO 17025 and Intertek Requirements., • Witnessing of testing activities undertaken as part of the ASTA schemes., • Processing and management of enquiries, quotations and orders for type testing and certification., • Regular monitoring of project status including discussions with colleagues in other offices., • Supporting of sales teams to progress the technical aspects of the sales process., • Liaising with clients, including the development of professional relationships and providing technical support., • Undertaking project work primarily for products within the IEC 61439 series of standards. WHAT WE OFFER Join Intertek and become part of our global network of inspiring and entrepreneurial colleagues. We are a global family that values diversity and we thrive working together with precision, pace, and passion. We are working to make the world Ever Better, ensuring the quality, safety and sustainability of products and services used by millions of people around the world. • Competitive salary/benefits, • Development and career opportunities around the Globe, • Working in a highly motivated team and dynamic working environment We are an Equal Opportunity Employer who do not discriminate against applicants. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex or national origin. xrnqpay Intertek operates a preferred supplier arrangement, and we do not accept unsolicited approaches from agencies.

Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in afriendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? At M Group Energy were enabling the energy essential to support our lives. We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation. This role will be within our Transmission & Renewables team. We design, build and commission substations at voltages up to and including 400kV. Our teams construct and maintain transmission lines and substations, ensuring the efficient and reliable delivery of electricity. What will you be doing? We're looking for a Senior Design Engineer (OHL) to join our Design team in our Annesley, Nottingham office on a Hybrid basis. Within the role you'll be providing support to the Design Lead and Client in solving issues related to Overhead Lines, perform the calculations and assessment as required in software or by manual calculations. You'll support the management of multiple design tasks or workstreams and balance competing project priorities. If you're an expert inindustry standard line design software PLS CADD and TOWER and their interaction with OHL design standards,this role could be for you! Lead the development of design solutions, including detailed calculations, drawings, reports and assessments. Undertake and check technical work, ensuring designs comply with relevant standards, specifications and client requirements. Provide expert technical input on complex engineering issues and support resolution of design challenges. Ensure design deliverables are completed to a high professional standard and within required timescales. Carry out site surveys, inspections and investigations to inform design development. Interpret site data, constraints and conditions to ensure robust design solutions. Engage with delivery or subcontract teams during site activities where design input is required. Collaborate with internal teams including engineers, technicians, project managers and delivery colleagues to ensure coordinated and integrated design outputs. Liaise with clients, external stakeholders and supply chain partners to support design discussions, approvals and technical clarifications. Ensure all design outputs comply with organisational quality standards, statutory requirements and safety obligations. Apply internal governance processes, including design reviews and technical assurance stages. Promote continuous improvement and identify opportunities for innovation or enhanced engineering practices. What youll bring: Expert understanding of industry standard line design software PLS CADD and TOWER and their interaction with OHL design standards. Have 5 years or more experience in OHL Design. Have clear knowledge of different types of overhead line towers, conductors, insulators and fittings. Knowledge of various types of overhead line foundations is desirable. In depth understanding and experience of delivering various design outputs for construction of overhead line. Some of the examples include line design, clearance investigations, structural analysis, optioneering reports, line profiles, string drawings, schedules and sag tensions etc Maintain an up-to-date working knowledge of National Grid, SPEN, SSE, BSI, ENA and other relevant industry standards. Chartered Engineer of IMechE/ICE/IStructE or working towards chartership is desirable. Whats in it for you? 25 days annual leave plus bank holidays Company car and fuel card with a range of EV and hybrid vehicles to choose from Private health care and health care cash plan Matched or contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leave and adoption leave About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planet Were open and seek new and better ways of exceeding expectations Were together and as one team; the whole is greater than the sum of the parts Were ambitious and embrace opportunity, to lead essential infrastructure services for life Whether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. Its an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rdparty background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupE#LI-SG1 #LI-Hybrid INDREG TPBN1_UKTJ

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in afriendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? At M Group Energy, were enabling the energy essential to support our lives. We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation. This role will be within our Transmission & Renewables team. We design, build and commission substations at voltages up to and including 400kV. Our teams construct and maintain transmission lines and substations, ensuring the efficient and reliable delivery of electricity. This role covers projects nationwide so willingness to travel and stay away is a must! Want to come and be a part of it? What will you be doing? As a Project Engineer, youll support the successful delivery of our Overhead Line projects, ensuring all engineering activities are completed safely, accurately, and to the highest standards. Do you have hands-on experience with strong problem-solving skills, and the ability to work effectively with project managers, field teams, and external stakeholders? Youll: Report safety incidents and near misses internally and to the client. Oversee foremen, line workers, and subcontractors daily. Communicate regularly with the client's site representatives and attend meetings. Monitor and manage project costs. Create method statements, work instructions, and risk assessments. Provide necessary information for contract status reports and other client-required reports. Document information to support project claims. Plan and coordinate labour, equipment, and materials. Determine material needs and coordinate with procurement to ensure availability. Adhere to OHSAS 18001, ISO 9001, and ISO 14001 standards and company policies. Manage health and safety for staff and sub-contractors on projects. What you'll bring: Self-motivated with good organisational and communication skills. Knowledge of Construction/Health & Safety Regulations. Site supervision experience on Overhead Line contracts, especially steel tower construction at 132kV+. Supervision of technical aspects of line construction. Experience with foundation construction in Transmission projects and setting out instruments. Management of sub-contractors and recording measurement details for financial settlement. Experience managing Foremen and Linesworkers. Full UK Drivers Licence - willingness to travel and stay away where required Whats in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; Matched or contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme My Rewards portal, access to 1000s of retail discounts Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leave and adoption leave Reward and recognition scheme In addition, this role offers; Company car and fuel card with a range of EV and hybrid vehicles to choose from Private health care and health care cash plan Discretionary bonus scheme 25 days annual leave plus bank holidays Overtime About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planet Were open and seek new and better ways of exceeding expectations Were together and as one team; the whole is greater than the sum of the parts Were ambitious and embrace opportunity, to lead essential infrastructure services for life Whether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. Its an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rdparty background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupE #LI-BS1 #LI-Onsite About The Company . TPBN1_UKTJ

Job Title: CNC Operator / CNC Fabrication Engineer Location: Nottingham Salary: £35,000 - £40,000 per annum Job Type: Full-time About the Role We are currently recruiting for a skilled CNC Operator / CNC Fabrication Engineer. This is a hands-on role responsible for the day-to-day operation, setup, and maintenance of CNC machinery, as well as supporting wider fabrication and production activities. Key Responsibilities Set up and operate CNC machines, including Trupunch 1000 with Sheetmaster Compact and Trumpf Press Brakes (3100 & 3066) Fold and cut parts in line with engineering drawings Carry out MIG welding of mild steel products to specification Perform basic TPM (Total Preventative Maintenance), including cleaning, sharpening, and minor repairs Manage stock levels of essential materials such as sheet metal and consumables Support goods-in processes, checking deliveries for quality and quantity Maintain a clean, safe, and organised working environment Assist with logistics and general production duties as required Learn and support the wider production process, including mechanical fitting where needed What We're Looking For Proven experience setting and operating CNC machines Ability to read and work from technical/mechanical drawings Experience with press brakes and folding machines (advantageous) MIG welding experience (mild steel) Forklift licence (desirable, not essential) Strong attention to detail and commitment to quality Self-motivated with the ability to work independently and as part of a team Personal Attributes Hardworking and reliable with a strong work ethic Team player with a collaborative mindset Proactive and able to take initiative Committed to meeting deadlines and production targets Strong focus on health & safety and best practices What We Offer Competitive salary (£35,000 - £40,000 DOE) 25 days holiday plus bank holidays Flexible start and finish times Company pension scheme (auto-enrolment) 3 months full sick pay Free refreshments and fresh fruit on-site Ongoing training and development opportunities Friendly, supportive working environment Workwear, PPE, and tools provided Additional Information Trial period: 3 months No travel required If interested please call/ text Liv on (phone number removed)

Project and Automation Engineer Location - Nottingham Shifts - Days Salary - £50,000 - £60,000 We are looking for a motivated Project and Automation Engineer to join a market leading company. Reporting directly to the Engineering Manager you will be a key member in ensuring all project and automation work is completed to the best of your ability. You will be involved in all aspects within their operation. With progressive development this company is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team. The position will appeal to a Project and Automation Engineer looking for their next challenging role within in a secure and stable company. Job Details : Design, fabricate, and install mechanical improvements, rigs, or production aids Build and wire control panels, including VFDs, relays, contactors and PLCs Programme or modify PLCs and HMIs (Siemens, Omron, etc.) Install and calibrate sensors, solenoids, motors, and safety devices Lead or support capex and process improvement projects Work with Production to trial and optimise automation upgrades Maintain records and provide documentation for installations or improvements Help install and commission new machinery and line changes Ensure compliance with food safety and health & safety standards Support and mentor junior engineers or apprentices where needed Qualifications & Experience : Solid experience in a controls or automation engineering role within FMCG or food production Mechanical know-how and fabrication skills (MIG/TIG welding, cutting, etc.) Strong understanding of sensor logic, wiring, VFDs, and control systems PLC and HMI knowledge - comfortable editing and troubleshooting logic Practical problem solver who loves turning concepts into working systems Clear communicator and effective cross-team collaborator Food hygiene, HACCP or BRC understanding is a bonus In return for your commitment my client offers a stable and secure career for a technically motivated manager. If you feel this is of interest, please send your CV directly to Morgan Blount at for a confidential discussion on 01455 710 912 TPBN1_UKTJ

Field Service Engineer | UK travel required | Permanent | Up to £48,000 | OTE up to £65,000 Cherry Professional are looking for an experienced Field Service Engineer to conduct Electrical and Mechanical maintenance, servicing and repairs to machinery UK wide. Working Monday – Friday. Please note this role also includes regular travel UK wide. Responsibilities: • Diagnosing faults with machinery • Servicing and emergency repairs • Carry out asset care plans and PM schedules across a range of automated filling and packaging equipment, robotics, site services and liquids processing equipment. • Operating within a CMMS system • Electrical fault finding • Root cause analysis • Diagnostics • Plant, machinery, and services breakdowns, identifying root cause, and implementing the required mechanical and electrical asset care. • Assist with contractor servicing of plant, machinery, and services. • Ensure compliance with safety regulations and standards • Follow maintenance schedules and carry out routine servicing of machinery • Process Improvement, Quality, reporting and Safety. Ideal Candidate: • Extensive Electrical knowledge • Experience working on a range of electrical and mechanical breakdowns repair of plant, machinery, and services. • Experience of implementing PM schedules • Experience working with hydraulic, pneumatic, robotic systems. Cherry Professional are recruiting on behalf of their client Roles you may have applied for: Field Service Engineer | Service Engineer | Mobile Maintenance Engineer | Electrical Engineer Cherry Professional are recruiting for this opportunity on behalf of our client. Please view our Privacy Policy on our website to understand how your data will be used if you apply for this role

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in afriendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? As an organisation, there is little we dont do and plenty to get involved in. Our Group Support roles are vital in making sure we can help over 11,000 people deliver essential infrastructure seamlessly across water, energy, transport and telecom. This role is in our Plant & Fleet department, Plant & Fleet supports teams across our business with their vehicle, plant and specialist equipment needs, offering hire solutions that are commercially effective, reliable, safe and compliant. Want to come and be a part of it? What will you be doing? Youll oversee workshop performance by monitoring and driving improvements through key business metrics. Youll boost workshop productivity and performance by fostering a supportive and efficient environment. Youll lead the 1st Line team with guidance and encouragement to ensure high standards of conduct. Wed expect you to supervise daily workshop activities, managing progress and supporting team development. Youll coordinate and schedule third-party work bookings, building strong relationships with suppliers and dealers. Youll uphold robust Health & Safety standards, ensuring a secure and compliant workshop environment. Also, manage and raise Purchase Orders, delivering cost-effective, high-quality solutions for M Group. Youll focus on Vehicle Off Road (VOR) control by regularly reviewing processes across departments to maximise asset availability. What youll bring Previous experience of working as a Senior Engineer or Workshop Controller role gained through working as a Service Engineer/Fitter on LCVs, HGVs or Plant & Equipment or in a similar position. Engineering qualification (likely to be gained in a Construction Plant environment, City & Guilds or NVQ preferred) achieved through a recognised formal training programme. Ability to analyse data and produce detailed counter measures to close performance gaps and provide high asset compliance. Keen to learn with an interest in development and progression Whats in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; Matched or contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme My Rewards portal, access to 1000s of retail discounts Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leaveand adoption leave Reward and recognition scheme In addition, this role offers; Discretionary bonus scheme 25 days annual leave plus bank holidays Recommend a friend get rewarded for introducing people to us! About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planet Were open and seek new and better ways of exceeding expectations Were together and as one team; the whole is greater than the sum of the parts Were ambitious and embrace opportunity, to lead essential infrastructure services for life Whether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. Its an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rdparty background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupG IND2 TPBN1_UKTJ

We are seeking a Reliability Engineer to join a leading manufacturer based in the Arnold area of Nottingham. The salary being offered is up to £54,000 working Monday to Friday 8am-4pm. The role comes with fantastic company benefits, pension match of up to 10%, overtime opportunities and training from a company that values its employees. The company is a market leader, and an international manufacturer, with an impressive background of investing and developing employees at all levels of their business, providing extensive training and career progression opportunities. What's in it for you as a Reliability Engineer: Basic salary circa £54,000 per annum Hours of work - 40hrs Monday to Friday 8am-4pm In addition, you have a matched pension of up to 10%, share options, overtime opportunities, as well as an extensive benefits program such as a cycle to work scheme, shopping discounts etc. Training and career development, including health and safety training, cross-skilling and upskilling Job security and personal development within a market-leading, international manufacturing organisation Leadership and management training for those who are keen to progress their careers and demonstrate ambition. Main Duties & Responsibilities of the Reliability Engineer: Working with the factory management team to ensure development, promotion and implementation of Company, Factory and Team plans Provision of engineering and technical expertise to facilitate the application of IMS tools and techniques to generate Continuous Improvement across all areas of the manufacturing capability The collection, assimilation and analysis of engineering, production and process data and its effective use to develop and achieve key targets and objectives Encourage and promote team-working at all times, nurturing ideas, opinions and a positive continuous improvement culture Planning and managing improvement projects, contribute to the budgeting process and potential Capital Spend Supporting the development of the Engineering Team and back up the electrical department Deputising for the Engineering Manager Promoting the highest Health and Safety standards to ensure a safe working environment. Required experience and Qualifications Required for Reliability Engineer: Engineering experience in a similar process environment Qualified to HNC level or equivalent in an engineering discipline (preferably electrical bias) Ideally apprentice trained in electrical or mechanical engineering Recognised Health and Safety experience and qualification; ideally NEBOSH certificate Leadership experience developing successful teams Demonstrable experience of project management Knowledge and experience of utilising and implementing Continuous Improvement such as Route Cause Analysis, 5S, Kaizen etc. If you are interested, please apply now

The process Safety Engineer is expected to apply extensive engineering skills, knowledge of process safety principles, and leadership skills to provide leadership in the application of process safety engineering principles in support of meeting the project objectives. They will support the Lead Proc

The successful candidate will work as a member of the Process Safety Team within the wider Safety Group and will be involved in all aspects of professional input to process safety consultancy projects. Safety Engineer, Functional Safety Engineer (FSEng), or other mutually agreeable. Chartered Engine

Are you an experienced Process Safety Engineer looking to take the next step in your career? Due to significant investment and an exciting period of expansion, a leading manufacturing organisation in Cornwall is seeking a Senior Process Safety Engineer to join their growing team. Strong background i

There is no boilerplate engineering in this system, only the most innovative, problem solving engineers can thrive on this challenge. You should be strong across all traditional process engineering activities:. Experience leading full lifecycle process safety.

A leading chemical engineering firm in the United Kingdom is seeking an experienced professional to develop and implement safety protocols for chemical processes. The ideal candidate will have a Bachelor's or Master's degree in Chemical Engineering, with strong experience in process optimization and

A leading engineering staffing provider in the UK is seeking a Process Safety Engineer to join their team. This role requires at least 15 years of experience in process safety engineering, providing technical leadership and engaging in risk assessments. The candidate should possess extensive knowled

A leading manufacturing company in Cornwall, England, seeks an experienced Senior Process Safety Engineer to enhance safety in their manufacturing operations. The ideal candidate has a strong background in Process Safety Engineering and a passion for maintaining safe working environments.