Product design engineer jobs in FarnhamCreate job alerts

Job Title: Senior Product Compliance Engineer Location: Barrow-in-Furness, Brough, Filton, Frimley, Portsmouth, Weymouth or Manchester – we offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you’ll be doing: • Attending and reporting to Daily Stand-Up Meetings (DSUM), • Design activities including but not limited to supporting rick reduction/ analysis and identification, • Applying a systems engineering approach to safety products including Working within a centralised modelling tool, • Working within a small safety team environment, • Supporting non-safety experienced member of the wider team to achieve desirable safety outcomes, • Supporting and preparing safety assessments as required to support system design and development, • Supporting the preparation of Design Safety Justification supporting inputs, • Providing Safety SME to product design and gate reviews, • STEM degree (ideally with Product Safety experience within a regulated industry), • Familiarity with UK Defence Standard and publications such as Defence Standard 00-56, Defence Standard 00-55, DSA-01, DSA-02, • Familiarity with safety analysis techniques such as: (FHA) (FTA) (ETA) (FMEA) (STPA) As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive. The Safety Environmental team: As the Senior Engineer – Product Safety the primary duties for this role will be heavily focussed on the safety during the product design process. You will undertake analysis and provide outputs to the Principal Engineers where they can provide assistance to develop designs further. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-GV1 #LI-hybrid

Senior Software Engineer - Cyber Location: Onsite, Hampshire. Employment Type: Permanent Salary: Competitive salary commensurate with experience, plus benefits. Security: Candidates must be eligible to obtain DV clearance due to the nature of the work. Our client is seeking a highly skilled Senior/Principal Software Engineer to join a leading organisation specialising in advanced cryptographic and key management solutions that ensure secure information exchange worldwide. This role offers the opportunity to develop innovative security technologies in a dynamic, high-security environment. What You Will Be Doing • Designing, implementing, and testing secure software solutions across various platforms and technologies., • Developing applications for embedded Linux, signal processing, data analytics, and web interfaces., • Writing clean, efficient code in languages such as C/C++ or Rust., • Collaborating with multidisciplinary teams to drive product development from concept to deployment., • Ensuring compliance with security protocols and contributing to documentation throughout the development lifecycle., • Engaging with hardware and FPGA components when required. What You Will Bring • Degree in Engineering, Computer Science, Mathematics, or a related field., • Proven experience in embedded Linux development, kernel or driver programming, or software in secure environments., • Proficiency in C/C++, Rust, Python, or similar programming languages., • Knowledge of object-oriented design, testing methodologies, and best practices., • Active UK Security Clearance at DV level (mandatory).

About the Company One team. Global challenges. Infinite opportunities. Our client are on a mission to deliver connections with the capacity to change the world. For more than 35 years, our client have helped shape how consumers, businesses, governments and militaries around the globe communicate. We’re looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. About the Role Our client has transformed the market for assured Data at Rest solutions and is rapidly growing its business where we are looking for a System Design Engineer to work across multiple Cyber and Information Assurance (IA) development projects within Viasat Government. You will work on identifying how to apply complex and innovative solutions to real world problems for the development of our unique product range. You will play a key role by assuming the overall system engineering and technical lead role on one or more Information Assurance developments. In addition to product development activities, you will also provide technical support to bid proposals. This involves collaborating closely with subsystem teams to develop technical solutions and ensuring coherency across technical subject areas. IA products comprise Hardware, Software, FPGA and mechanical development. Responsibilities • Requirements engineering, where you will take on the challenge to understand and help define the technical content of the solution across all design disciplines., • Your technical involvement will cover the whole development lifecycle from initial concept through development and verification., • Partner closely with the Technical Project Manager for delivery of the project to time, cost, quality and performance requirements. Qualifications • 5+ years industrial experience in a related area and a degree-level qualification in a relevant field., • Must have sole British Nationality (due to UK eyes-only projects), and have, or be capable of obtaining, UK security clearance (SC). Required Skills • Experience of the systems engineering lifecycle, including requirements management, system design process and product validation and verification., • Good understanding and appreciation of all design disciplines, likely to have expertise in at least one., • Ability to produce clear and concise technical documentation., • Experience in using DOORs for requirements management. Preferred Skills • Ability to handle complexity, uncertainty and competing demands., • Demonstrable experience of problem-solving skills., • Ability to demonstrate and apply system-level thinking., • Ability to spot areas of concern, investigate and drive to a solution – ask the right questions., • Experience of system design languages (e.g. UML, SysML), and techniques (e.g. use case analysis, trade studies)., • Experience in producing estimates for bid activities., • Knowledge of mechanical and environmental qualification processes.

Job Title: Principal Product Safety Engineer Salary: Up to £68,500 (dependent on skills and experience) Location: Scotstoun or Filton, Wales or Radway Green, Cheshire – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role What you’ll be doing: • Provide support to the Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within., • Responsible for product safety assessment against major subsystems or key complex technologies, • Verify the quality of submissions to the Hazard Log, • Organise and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required., • Knowledge of product safety management processes and techniques, • Experience of working in more than one phase of the Life Cycle Management (LCM) framework, with sufficient experience of the total LCM to enable a good understanding of adjacent phases and through life engineering issues., • Awareness of customer (Ship/ System Safety) standards such as:-, • DSA-02, • JSP430;, • Def. Stan 00-56;, • Mil Std 882E As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive. Product Safety Team: The River Class Destroyer project is part of an ‘unprecedented fleet renewal’ by the Royal Canadian Navy (RCN). As part of this project, you will be joining a small team of 11 Product Safety practitioners located across two sites. You may be working with others on a large complex programme or individually for one or many smaller programmes. Accountability for the safety of the design solution rests with the Technical Authority. Your role is to support the Technical Authority in their decision making, create a plan of activities that will ensure that by working within the Product safety management framework, risks have been identified systematically and managed so far as is reasonable practicable. You will become exposed to a wide range of technical disciplines, be able to follow technical argument and be able to influence the integrity of the final product. Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 23rd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-AP1 #LI-hybrid

Job Title: Principal Engineer – Combat Systems (External Communications) Location: Frimley- we offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role. Salary: Competitive What you’ll be doing: • Define and develop the ECS design through systems engineering principles, including; architecture, requirements, concept solutions and interfaces to enable the development and production of the component sub-systems, • Understand the contractual and performance requirements for communication products and sub-systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities, • Understand and support the flow-down of requirements to suppliers and acceptance of their specific deliverables, ensuring it is captured and recorded appropriately, • Support the EM and PM in supporting bids, proposal development and project planning activities, • Provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer, • Knowledge and experience in wireless communication systems and products in the maritime, defence and/or commercial domains and an understanding of how such systems are used and interact with the overall submarine build programme, • STEM-related degree or equivalent experience within the aerospace/defence/telecommunications/marine environment, • Knowledge of the complete engineering lifecycle with experience in operating in a number of the key lifecycle phases including requirements/system design, and integration and acceptance, • Have a strong awareness of product safety and SHE As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive. The ECS Team The ECS team primarily focuses on designing, developing, and integrating the communications system on-board submarine platforms. As part of this growing team, you’ll explore innovative technologies and integrate them into cutting-edge designs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-KP1 #LI-hybrid

Job Title: Principal Systems Engineer Location: Cowes, Broad Oak, Great Baddow – Part time & accruing hours available. Please let us know if you would like to discuss these options Salary: Up to £75,900 (dependent on skills and experience) What you’ll be doing: • Develop novel solutions to evolving technical challenges and emerging issues for complex Radar Systems that our customers and end-user communities are facing, • Apply a breadth of knowledge, skills and experience of Systems Engineering principles, techniques and governance to steer and develop technical solutions and resolve engineering issues, • Conduct system design analysis to manage trade-offs of system parameters to characterise and specify robust product design, • Lead the decomposition of requirements to system and sub-system level and manage these in an approved toolset such as IBM DOORS Next, • Be a technical focus point with a holistic understanding of a whole system solution leading analysis activities and system design decisions and providing guidance to own team, • Collaborate with specialists across different engineering disciplines including electronics, electrical, mechanical and software to direct and realise overarching system design solutions, • Direct and undertake system integration, test planning and execution, • Define and articulate system acceptance strategies and acceptance evidence demonstrating system performance across a wide range of operational scenarios to internal and external stakeholders, • A good understanding in some of the following subject areas; signal processing, target track extraction, object classification algorithms, system and sensor resource optimisation, • A good understanding of factors that can affect the real-world performance of sensing systems and how these can impact the accuracy and timeliness of measurements in order to meet challenging design objectives and requirements, • Demonstrates understanding and experience of Systems Engineering which could include knowledge of Systems Engineering standards (e.g., ISO 15288) As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive. The Radar Systems Engineering team: You will be working as a Principal Systems Engineer within our close-knit multi-function radar team of inter-disciplinary engineers, evolving our radar portfolio of existing and brand-new radar products to address emerging and future threats. This role is a fantastic opportunity to enhance your skills and invest in your career journey within a global business. You will be supported in growing your knowledge in contemporary and cutting-edge Radar techniques, with opportunities to develop your skills and responsibilities in technical leadership In this role, you will be able to enjoy both flexible and hybrid working arrangements. Our workplace in Cowes is an easily accessible commute from Southampton with a regular foot passenger ferry and BAE shuttle service from the ferry terminal to site. As the world has evolved, so has the way we work. Our working approach, will enable you to have flexibility with your working hours, depending on your role and location. This could include part time hours, accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date 19th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-TP1 #LI-Onsite

Job Title: Combat Systems Engineer – External Communications Location: Frimley, Filton, Portsmouth Broad Oak or Weymouth. We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role. Salary: Negotiable depending on experience What you’ll be doing: • Capturing and agreeing technical requirements in accordance with company and programme processes, • Reviewing technical solutions against contractual requirements and regulations for compliancy, • Design documentation generated, captured, configured and controlled in accordance with company processes, • Design change requirements and documentation generated, captured, configured and controlled in accordance with company processes, • Captured and agreed input to appropriate Verification Cross-Reference Index (VCRI), Integration, Test, Evaluation and Acceptance Plans (ITEAP) and Qualification Plans, • Understand and interpret the User Needs, Concept of Operations (CONOPS) and Concept of Use (CONUSE) and be able to derive the technical and functional requirements for specific external communications systems, • Ensure design proving evidence is comprehensive, captured within the requirements management tools (IBM DOORS) and has been endorsed by the appropriate level of authority, • Understand the contractual and performance requirements for external communications systems and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning LCM process using CADMID, • Understand and support the flow-down of requirements to suppliers and acceptance of their specific deliverables, ensuring it is captured and recorded appropriately, • Provide specialist technical support to shipbuilder installation, integration activities and commissioning activities (included in-service refitting authorities) Essential: • Knowledge of external (over the air) communications systems in the maritime defence domain and have a comprehensive understanding of how such systems and associated activities interact with the overall platform (knowledge of the whole radio frequency spectrum, Data/Voice Communications and Systems Network Architecture). Platform and ideally sea experience in an operational, build, trials or in-service support environment in order to have gained an understanding of the operational needs and requirements of a Combat System, and to help be credible with the Customer and User, • Have good awareness of Product Safety and SHE As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive. The ECS (External Communications Systems) team: You will be joining a tight knit and diverse team who are always looking to share their knowledge / expertise in this area. Challenges are met as a team, and this is an opportunity to both showcase your ability to engage with stakeholders and your collaborative skills. This role will have you leading areas such as Requirements Management and Testing & Integration of equipment into wider systems across Submarines. This will give you exposure to a range of suppliers & customers. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-AG1 #LI-Hybrid

We are looking for a driven Process Engineer responsible for the development and optimisation of rubber manufacturing processes. This hands-on role offers the opportunity to solve real engineering challenges, and play a key part in delivering high-quality production solutions as part of a dynamic team. Hours of Work: MondayThursday: 7:00am 4:30pm (45-min lunch)Friday: 7:00am 12:00pm Holiday: 25 days plus bank holidays Pension: 4 x employer 4 x employee + 2 x salary life cover Process Development Develop and document production processes for rubber moulding and related assembly operations. Support new product introduction by determining robust moulding parameters and process flow. Work with internal and external teams on tooling design, product feasibility, and process improvement. Technical Areas May Include Injection, compression, and transfer moulding processes. Rubber testing and measurement in collaboration with the in-house laboratory. Rubber-to-metal and rubber-to-substrate bonding processes. Tooling development with support from CAD, in-house tooling engineers, and suppliers. Finishing, trimming, and inspection processes. Production Support Investigate and resolve production issues on the shop floor, including root cause analysis and corrective actions. Occasionally operate production equipment if required to support urgent needs. Train machine operators on new processes and ensure smooth handover to production teams. Project & Quality Ownership Manage individual projects and timelines to meet customer and internal requirements. Evaluate and control critical quality characteristics of rubber-based products. Ensure all processes meet safety, quality, and performance standards. Requirements Understanding of injection, compression, or transfer moulding (experience in all three is a strong advantage). Practical, hands-on approach with the ability to learn and operate rubber moulding machinery. Ability to assess and interpret key quality characteristics of rubber components. Desired Skills Experience working in a fast-paced production environment. Background in plastics or injection moulding. Ability to work effectively within cross-functional and multicultural teams. Strong communication, teamwork, and analytical problem-solving skills. TPBN1_UKTJ

A leading financial services firm is seeking a Lead Software Development Engineer - Architect to join their team in Farnborough.You will collaborate with product managers to shape strategic roadmaps while leading the design and implementation of high-performance applications.The ideal candidate has

A recruitment agency is seeking a Senior RampD Engineer NPD to lead new product introduction projects in Farnborough.The ideal candidate will take concepts through to manufacturing in a regulated environment, preferably with a background in medical devices.Responsibilities include owning design outp

Lead Subsea Acoustics Engineer Near Farnborough £Competitive + Bonus + Great Benefits Were seeking an innovative Lead or Principal Engineer to guide the development of next-generation underwater positioning and communication systems. This is a high-impact technical leadership role at the intersection of acoustics, embedded systems, and subsea engineering delivering reliable, secure, and intuitive solutions that support exploration, defence, and offshore energy operations worldwide. As part of the engineering leadership team, youll define technology strategy, coordinate multi-disciplinary teams, and help shape the future of underwater navigation and communication. What Youll Do Lead the design, development, and deployment of advanced underwater acoustic positioning and communication technologies (USBL, LBL, and related systems). Collaborate with hardware, software, and systems engineers to deliver high-performance embedded solutions. Develop and maintain technology roadmaps that align with company and product strategy. Analyse complex acoustic and system data to optimise performance and reliability. Mentor engineers and scientists, fostering technical excellence and innovation. Represent the engineering function at customer reviews, technical forums, and industry conferences. Ensure all products meet the highest standards of robustness, usability, and interoperability. About You Youre a hands-on technical leader who enjoys tackling complex acoustic and systems challenges. You combine deep technical expertise with the ability to inspire, guide, and communicate across diverse teams. Essential Skills & Experience Degree (or higher) in Engineering, Physics, Applied Mathematics, or a related field. 5+ years of experience working with underwater acoustic systems (e.g., USBL, LBL, sonar, or acoustic communications). Strong background and knowledge of embedded systems development (C/C++, Linux RT, DevOps tools). Demonstrated understanding of acoustic navigation principles and signal processing. Proven experience leading or mentoring cross-disciplinary technical teams. Excellent communication and documentation skills able to convey complex ideas clearly and confidently. Nice to have Experience in subsea robotics, oceanography, or defence applications. Proficiency with modelling, simulation, or data analytics for acoustic systems. Familiarity with agile development and continuous integration workflows. Whats on Offer Join a forward-thinking engineering organisation developing technologies that enable safer, smarter, and more connected oceans. Youll work with cutting-edge systems, from early-stage research to real-world trials, in a supportive environment that values technical curiosity and collaboration. We offer: Competitive salary and benefits Opportunities for travel, field trials, and applied research Professional development, mentoring, and career progression This position would suit a Lead or Principal Engineer who has drive, ambition and a desire to lead from the front. Youll be solutions focused and be able to demonstrate what needs to be done in order to achieve the bigger picture. TPBN1_UKTJ

Design Engineer (Pneumatic Valves / Compressors) £50,000 - £55,000 + Office Based + 25 Days Holiday + Full Project Lifecycle + DFMA Farnborough, Hampshire Are you a Design Engineer with knowledge of Pneumatic valves or compressors looking to join a company at the forefront of their industry, where you will work under senior members of the team and be respected as a technical expert? In this role you will be designing a wide range of highly specialised breathing apparatus used within 5th Gen fighter jets and emergency life support equipment for hazardous environments. You'll be trained on how to use Creo and be working across the entire project life cycle, from design to manufacture and assembly. This company are experts in their technical niche and work at the cutting edge of their industry. With solutions for multiple markets, they are looking for a design engineer to join a small team to facilitate new product introduction. This role would suit a Design Engineer from a pneumatic valve or compressor background looking to become a true technical expert in a company on the cutting edge of their technical niche. The Role: Using Creo (training provided) to design life support equipment such as respirators Full project ownership from Design, manufacture and assembly Working on new product introduction Office based, local to Farnborough The Person: Design Engineer Previously work on pneumatic valves, compressors or similar 3D Design background Job Reference: BBBH23920 Design, Engineer, Engineering, 3D, Creo, SolidWorks, AutoCAD, DFMA, Manufacturing, Valves, Pneumatic, Compressor, NPI, Defence, Aerospace, Farnborough, Camberly, Aldershot If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Info about the company A global automotive technology business specialising in advanced electric drive systems for passenger cars, light commercial vehicles and future mobility applications. The company operates at the forefront of innovation, developing high-performance electromechanical products within a regulated, quality-driven environment. Info about what the Product Validation Engineer role entails This is a hands-on role supporting the development, build and validation of prototype products within a cutting-edge R&D environment. You will be responsible for building prototype units, assembling mechanical and electronic components, setting up and running validation tests, and producing clear test documentation and reports. In addition, the role includes responsibility for test equipment calibration and maintenance, ensuring all equipment remains compliant, traceable and fit for purpose. This position is ideal for an electromechanical technician who enjoys practical build, testing, and working closely with engineering and development teams. Key Responsibilities Mechanically and electrically assemble prototype products to the highest quality standards. Build and test electronic modules, including wiring and soldering activities. Generate clear and accurate build documentation. Set up and carry out product validation and verification tests in line with defined procedures. Design and build basic test jigs and fixtures to support validation activity. Produce test documentation, reports and records to support development and compliance. Support the development of test strategies for current and future products. Manage calibration and maintenance of test equipment across UK facilities. Maintain and update test equipment inventory and calibration records. Coordinate with internal teams and external suppliers to ensure equipment remains calibrated and compliant. Ensure equipment management processes meet ISO 17025 and ISO 9001 requirements. Monitor equipment condition, calibration status and associated budgets. Promote continuous improvement in test equipment and calibration processes. Essential Requirements of the Product Validation Engineer HNC / Level 4 (or higher) qualification in an electrical, electronic, mechanical or electromechanical discipline. Proven experience working as an electromechanical technician within an R&D, test or product development environment. Hands-on experience using laboratory test equipment such as oscilloscopes, meters, current clamps and data loggers. Strong soldering and wiring skills. Experience testing low-voltage products. Ability to read and interpret electrical schematics and mechanical drawings. Experience following test procedures and producing structured test reports. Understanding of test equipment calibration and maintenance processes. Desirable Requirements of the Product Validation Engineer IPC 610 certification. Knowledge of ISO 17025 requirements. Understanding of calibration factors such as accuracy, resolution, range and measurement uncertainty. Experience working in high-performance or motorsport-style engineering environments. Benefits Competitive salary package On-site role within a modern R&D facility Generous pension scheme 25 days holiday plus bank holidays Enhanced family leave policies Cycle to work scheme Employee assistance programme Learning and development opportunities Free on-site parking If you feel you are suitable and interested in this role, APPLY NOW with an up to date CV. We also pay referral fees if you can suggest another suitable person that isnt already known to us. April Quest Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003. We take your privacy seriously; our Privacy Policy can be viewed on our website. TPBN1_UKTJ

Job Description About us One team. Global challenges. Infinite opportunities. We're on a mission to deliver connections with the capacity to change the world. For more than 35 years, we have helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do We have transformed the market for assured Data at Rest solutions and is rapidly growing its business where we are looking for a System Design Engineer to work across multiple Cyber and Information Assurance (IA) development projects within Viasat Government. You will work on identifying how to apply complex and innovative solutions to real world problems for the development of our unique product range. You will play a key role by assuming the overall system engineering and technical lead role on one or more Information Assurance developments. In addition to product development activities, you will also provide technical support to bid proposals. This involves collaborating closely with subsystem teams to develop technical solutions and ensuring coherency across technical subject areas. IA products comprise Hardware, Software, FPGA and mechanical development. The day-to-day One key part of the role is requirements engineering, where you will take on the challenge to understand and help define the technical content of the solution across all design disciplines. Your technical involvement will cover the whole development lifecycle from initial concept through development and verification. Moreover, you will partner closely with the Technical Project Manager for delivery of the project to time, cost, quality and performance requirements. What you'll need 5+ years industrial experience in a related area and a degree-level qualification in a relevant field. Must have sole British Nationality (due to UK eyes-only projects), and have, or be capable of obtaining, UK security clearance (SC). Experience of the systems engineering lifecycle, including requirements management, system design process and product validation and verification. Good understanding and appreciation of all design disciplines, likely to have expertise in at least one. Ability to produce clear and concise technical documentation. Experience in using DOORs for requirements management. Are you considering expanding your domain? This role would be a great fit for an experienced system engineer or an electronics/software engineer wishing to move into a role with a wider scope of responsibilities. What will help you on the job Ability to handle complexity, uncertainty and competing demands Demonstrable experience of problem-solving skills. Ability to demonstrate and apply system-level thinking Ability to spot areas of concern, investigate and drive to a solution - ask the right questions. Experience of system design languages (e.g. UML, SysML), and techniques (e.g. use case analysis, trade studies) Experience in producing estimates for bid activities Knowledge of mechanical and environmental qualification processes TPBN1_UKTJ

Product Design EngineerSalary: Up to £40,000Job Type: Full-timeLocation: Nr TopshamA growing, internationally recognised manufacturer of outdoor and technology-integrated equipment is seeking a talented and ambitious Product Design Engineer to join its in-house design and engineering team. With a s

The Senior Product Design Engineer will be part of a dynamic team where creativity, collaboration, and problem-solving drive real impact. An innovative global engineering company with a reputation for excellence and cutting-edge technology.

Bachelor’s degree (or equivalent) in Product Design, Industrial Design, Mechanical Engineering, or related fields. We’re now seeking a Senior Product Designer with strong engineering capability and design maturity to help shape the next chapter of our growth. D is a full service UK-based product

A leading software collaboration company is looking for a Design Engineer to enhance design solutions and work closely with engineering teams. Candidates should be self-starters who thrive in dynamic environments and have strong proficiency in design software, particularly Figma.

A leading financial services provider is looking for a Senior Product Security Engineer in London.

Newton Colmore Consulting specializes in recruiting within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. Product Design Mechanic

A degree in mechanical engineering, automotive engineering, naval architecture or similar — alternatively, training as a technical product designer. Job Title: Design engineer in product development (m/f/d). Holistic design and development, including consideration of all legal and production-relev

Check out what our Mechanical Engineering team is all about: Crux - Mechanical Engineering. In-depth knowledge of a wide range of engineering processes. We are a dynamic and fast-growing engineering consultancy that takes pride in its outstanding work and supportive work environment.

They understand the architecture of the systems and are able to work with Engineering Managers and Product Managers to define and document architecture for new areas of the system, aligning to RedCloud’s architecture strategies. A Senior Software Engineer solves challenges and adds value for our c

The role involves designing products, developing CAD models, and collaborating with engineering teams. Ideal candidates will have a degree in Mechanical Engineering and significant experience in design engineering. A leading recruitment agency is seeking a Mechanical Design Engineer for a dynamic co

This position would suit someone with experience in mechanical or product design who enjoys hands-on engineering and structured development environments. This is a practical, office-based role suited to engineers who enjoy being closely involved in design activity and seeing concepts progress into p

Check out what our Mechanical Engineering team is all about: Crux - Mechanical Engineering. Experience and enthusiasm for engineering design. Knowledge of engineering materials and manufacturing processes.

An established UK engineering firm is seeking a Mechanical Engineer with a product design focus. The ideal candidate should have experience in mechanical or product design, proficiency in 3D CAD software, and the ability to manage multiple tasks effectively. This position offers a variety of design

A leading engineering company in East Sussex is seeking a Junior Electrical Design Engineer. The successful candidate will support the Engineering Department in new product development and provide technical support. Applicants should have an HNC/Degree in Mechanical or Electrical Engineering and at

A leading engineering company in the United Kingdom is searching for a skilled Mechanical Design Engineer to contribute to high-quality technical solutions. The ideal candidate should possess a degree in engineering, solid experience in mechanical design, and proficiency in SolidWorks, along with st

A forward-thinking tech company in Greater London is seeking an engineer to design and build software that balances creativity and functionality. The ideal candidate will improve software usability by developing innovative design systems and collaborating with customers and team members. You'll have

We are a dynamic and fast‑growing design and engineering consultancy that takes pride in its outstanding work and warm and supportive workplace. We’re looking for an experienced and passionate Quality & Regulatory Engineer to join our growing team and support impactful work across a diverse port

A technology recruitment agency is seeking an experienced Electrical Design Engineer to join their client's team in East Sussex. The role involves supporting the Engineering Department in new product development and providing technical support.

A leading engineering company in East Sussex is seeking an Electrical Design Engineer to support their Engineering Department in new product development and provide technical support. The ideal candidate will have 10+ years of experience in the industry, preferably in rail, along with a degree in El

A leading design consultancy located in the West of England is seeking an experienced Quality & Regulatory Engineer to join their team.

We are seeking a highly skilled and talented Security Engineer to join our team. Design, implement, and maintain secure application architectures, frameworks, and guidelines, incorporating industry standards and best practices. Conduct threat modelling exercises to identify and prioritize potential

Product Design: Proven experience in designing and developing commercial‑grade products. Mechanical Design Engineer / Industrial Product Designer. MECHANICAL DESIGN ENGINEER / INDUSTRIAL PRODUCT DESIGNER.

A client in East Sussex is seeking a Junior Electrical Design Engineer to support their Engineering Department in product development and provide technical support. The candidate should have an HNC or Degree in Mechanical/Electrical Engineering and 2+ years of experience in the industry.

Senior Product Design Engineer. Applies sound engineering/ product design standards to deliver real solutions. China-based Product Development teams, multi-functional teams, and executive teams to ensure that great ideas make it through to production.

A leading product design consultancy in Warwickshire is looking for a Mechanical Engineer or Senior Mechanical Engineer to join their innovative team. Qualified candidates will have a relevant degree and experience in product design.

A specialist design and manufacturing firm in the United Kingdom seeks a Mechanical Design Engineer. The selected candidate will manage the entire product life cycle, collaborate across various functions, and lead product development projects. Ideal candidates should possess a mechanical engineering

A recruitment agency is seeking a Design Engineer to join a client in Telford. The role offers a competitive salary up to £50,000, focusing on designing bespoke products and managing multiple projects. This position is ideal for someone who enjoys working independently and collaboratively on design

A renowned fashion retailer in Greater London is seeking a skilled product developer to enhance its interior product line. The successful candidate will manage product development, produce detailed technical documentation, and collaborate with external design teams to ensure project success. Candida

An engineering company in the United Kingdom is seeking a Design Engineer to work in their Leeds office. The ideal candidate will have an HNC/HND in Mechanical Engineering and experience with 2D and 3D CAD software such as AutoCAD or SolidWorks. Responsibilities include creating manufacturing detail

A dynamic engineering consultancy is seeking a Senior Mechanical Engineer to lead multi-disciplinary projects in medical and consumer goods sectors.