Simulation engineer jobs in CoventryCreate job alerts

Role: Firmware/FPGA Engineer Location: Coventry - Hybrid Salary: £35,000 - £55,000 pa Required: Full Right to Work • VHDL development, • FPGA simulation & testing, • Work in a group of Electronics & Embedded Software Engineers, • Review existing code and develop new solutions Key Skills/Experience: • Experience with FPGA Design and Development, • Experience with VHDL or Verilog, • Degree in Electronics or another relevant discipline Any mix of the following is beneficial: • Embedded Software (Embedded C/C++), • Experience with PCB Design and Layout software/tools If you are an FPGA Engineer, looking for an exciting new opportunity to join a passionate, enthusiastic growing engineering business, then please apply now with your updated CV or call Brian at Premier Group on 01189028800 for further information.

Innovative Technology start-up in the Sustainability sector seeks an open-minded Linux Systems Administrator / Linux Infrastructure Engineer to maintain internal systems and provide a compute platform to operate their simulation, optimization and AI technology at scale.You’ll also have the opportu

We are looking for an experienced Senior Traffic Signals Engineer to help with the expanding workload of our Midlands Transport Team based in Leicester. Do you have the skills to fill this role Read the complete details below, and make your application today. We offer a challenging and rewarding career working for a leading transport consultancy with a strong presence in the Midlands that undertakes projects across the whole of the UK. You will join a growing team delivering a wide variety of interesting projects for clients in the private and public sectors. Your Role Working within an existing team of traffic signal engineers, your tasks will include traffic signal design to current UK standards using AutoCAD, capacity assessments using LinSIG and preparing outputs for inclusion in client reports and specifications. The role requires somebody with experience in project management, client liaison, work winning and mentoring junior staff. Your work will involve: • Understanding client requirements for signal design and assessment, • Client liaison and preparing fee proposals, • Project management, • Producing signal junction layout designs and specifications, • Analysing, collating and interpreting transport data, • Ensuring work is delivered on time and within budget, • Attending internal and external client and team meetings, • Undertaking site visits, • Providing technical advice to support colleagues Professional Development The role presents an excellent opportunity to progress your career and work within a successful team on a wide range of exciting projects. About You: We are looking for an enthusiastic and versatile individual with experience working in the industry that should ideally include: • A good understanding of current UK design standards and guidance, • Excellent working knowledge of LinSig & TRANSYT signal junction modelling theory and methods, • Competent user of AutoCAD and AutoTrack for junction design, • Good working knowledge of Microsoft Word and Excel, • Ability to produce clear, precise and coherent analysis, reports and drawings, • Knowledge of traffic data collection and analysis, • Experience of developing and maintaining client relationships, • Drive to succeed and a willingness to get involved, • Excellent written and oral communication skills, • Methodical approach to problem solving and strong attention to detail, • Strong team working capabilities, • Focus on results and project delivery, • Degree or MSc in relevant subject (e.g. transport planning, civil engineering), • Professional Membership (e.g. MIHE, MCIHT, MTPS or MCILT), • MOVA design, configuration and validation, • The design and implementation of other ITS Technologies, UTMC, UTC etc, • Experience in using micro-simulation models such as VISSIM and/or PARAMIC, • Experience of using other junction modelling software (e.g. TRANSYT, Junctions9), • Experience of preparing traffic signal controller specifications and implementation Tetra Tech is a leading provider of high-end consulting and engineering services for projects worldwide. We combine the resources of a global, multibillion dollar company with local, client-focused delivery in more than 400 locations around the world. We are Leading with Science to provide sustainable and resilient solutions for our clients. At Tetra Tech, we provide a collaborative environment that supports individual performance, innovation, and creativity. We are proud to offer competitive compensation and benefits. For more information on our company, please visit our . To apply, please submit your CV and cover letter on the Careers section of our website. Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010. We are very happy to discuss flexible working for this role, including the possibility of reduced hours, flexible start and finish times, or compressed hours.We can offer a range of solutions to help you to get the most out of your work / life balance. xrnqpay We thank all applicants for their interest; however only those selected for an interview will be contacted.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of: Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. Read more about us ___. The Role: This role will be a part of our Saab Seaeye business in Fareham. In this role you will take responsibility for the full-lifecycle design and development of bespoke power conversion and transmission solutions in line with the company's business needs through innovation, creativity and professionalism. As Lead Engineer you will act as Technical Authority for concurrent power projects: from in-house designs to outsourced specification and management. Key Responsibilities: The role seeks an engineer with excellent knowledge of power architectures, transmission, conversion and distribution, whilst having an appreciation for the real-world subtleties involved in creating robust and reliable power systems. You may be working on anything from large-scale power conversion products, efficient cabled transmission designs all the way through to motor drives and low voltage converters. Our voltages range from 24V to 5000V with powers from 500W to 250kW. You will be responsible for the successful design, implementation and delivery into our products. This may include technically leading small multi-disciplinary teams and therefore the candidate must show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills. A product-focussed mindset is essential: taking a view across the different engineering disciplines to deliver the most appropriate solution. Our products provide unique challenges in designing non-conventional solutions which can meet size, weight and efficiency demands. Qualifications and Skills: Essential: • Significant Experience in Power Electronics, • Full-lifecycle experience: from concept to tested solution, • Self-starter: taking the lead and having a proactive mindset, • Excellent theoretical knowledge backed up by proven hands-on experience, • Proven knowledge of power transmission: AC and DC, applied to multi-km cabled solutions, • Proven Knowledge of DC converter topologies: Buck/Boost/Flyback/LLC/Full-Bridge, • Proven Knowledge of AC converter techniques: single phase/multiphase, power factor correction, • Experience of power converter product design AC-DC, DC-DC and DC-AC inverters, • Experience working with power switching devices: MOSFET, IGBT, SiCFET, GaNFET and associated drive circuitry, • Experience working with voltages up to 5kV and multi-kW powers, • Experience in designing or specifying custom transformer and magnetic components, • Experience using modelling and simulation packages, • Experience in both digital and analogue design concepts, • Experience of filter design and implementation, • Experience designing/specifying control systems for power conversion, • Knowledge of thermal management techniques, • Knowledge of design-for-compliance, • Experience developing requirements specifications and test procedures, • High Voltage Experience up to 5kV, • Thermal modelling experience, • Motor design principles and control techniques

Role Details • Role / Job Title: Emission CAE Engineer 1D simulation GT-Suite, • Work Location: UK, Gaydon, • Mode of Working: Office based (5 days a week), • Duration of Assignment: 6 Months The Role As a Lead CAE Engineer to work within virtual engineering for our vehicle and powertrain programs. You'll be responsible for vehicle level analysis to predict tail pipe emissions of gasoline programs. The role requires good understanding of detailed aftertreatment system modelling and engine out emissions & responsible for conducting CAE modelling, analysis and reporting. Key Responsibilities, • Development of methodologies for engine out emission prediction, • Develop models for exhaust system to capture altitude and off ambient conditions impact on tail pipe emissions, • Supporting 1D modelling of vehicle emissions virtual test cases to size the system, support technology selection, provide status and directional support for controls and calibration development, • Problem solving and issue resolution support related to vehicle emissions predictions, • Collaboration with internal suppliers of 1D simulation input data as necessary to ensure a value add output, • Generation of steady state to transient emissions coefficients based on test bed data, • Leading identification of 1D Powertrain Systems CAE tool and/or process enhancement requirements to meet current & future powertrain systems for hybrid vehicles analysis needs focusing on emissions Key Stakeholders, • Hardware Function layer group, • Calibration and controls group, • Engine and vehicle tests Team, • After-treatment components group, • CAE Integration Lead Engineers, • System Design Engineers Skills / Knowledge / Experience Essential, • Excellent understanding of engine out emission fundamentals and commonly used methods for its predictions, • Very good aftertreatment modelling and engineering understanding (as simulation or calibration engineer), • Substantial industrial experience of assessing and verifying vehicle/powertrain emissions (desirable in a CAE environment), • Good analytical capability and breadth of experience in GT-Suite, • Able to identify and respond to the strengths and limitations of computer-based modelling and simulation Desirable, • Experience of Powertrain system, engine and aftertreatment physical test and/or calibration, • Proven success in complex system model validation, optimisation and correlation, • Experience in 1D vehicle and powertrain system model development Your Profile Desirable Skills / Knowledge / Experience, • Understanding of aftertreatment technologies and their role in delivering Vehicle Systems Emission performance, • Self-motivated, with strong personal management capabilities, • Able to work with minimal supervision, engaging a wide range of stakeholders effectively, • Have the ability to balance different technical and business parameters to deliver the right solution for the customer and business, • Ability to manage time effectively and to balance delivery to several projects within the same time frame JBRP1_UKTJ

Applications Engineer – Specialist Grinding Solutions Coventry (with UK & Europe travel) | £38,500 - £45,000 + Company Car + Benefits | Permanent We're recruiting an Applications Engineer for a respected machine tool manufacturer specialising in advanced grinding technology. You'll be supporting customers throughout the UK and Europe with turnkey grinding projects - developing machining strategies, creating CNC programmes, supporting installations, and ensuring successful machine acceptance. What you'll be doing: Developing tailored machining strategies for customer grinding projects Producing CNC programmes (Fanuc experience preferred) Managing and documenting First Article Inspection (FAI) Delivering customer training and supporting machine acceptance and sign-off Contributing to turnkey projects both on-site and remotely Working with internal teams and European engineering colleagues Regular UK and European travel to customer sites What you need: Solid engineering background with 4+ years in a machine tool environment Previous experience as Production Engineer or CNC Setter/Operator Confident NC programming skills (Fanuc controls advantageous) Proactive approach with clear communication skills Ability to manage multiple projects simultaneously Creep feed grinding experience is helpful but not essential. Familiarity with CAM and machine simulation software is benefici...

Role Details • Role / Job Title: Emission CAE Engineer 1D simulation GT-Suite, • Work Location: UK, Gaydon, • Mode of Working: Office based (5 days a week), • Duration of Assignment: 6 Months The Role As a Lead CAE Engineer to work within virtual engineering for our vehicle and powertrain programs. You'll be responsible for vehicle level analysis to predict tail pipe emissions of gasoline programs. The role requires good understanding of detailed aftertreatment system modelling and engine out emissions & responsible for conducting CAE modelling, analysis and reporting. Key Responsibilities, • Development of methodologies for engine out emission prediction, • Develop models for exhaust system to capture altitude and off ambient conditions impact on tail pipe emissions, • Supporting 1D modelling of vehicle emissions virtual test cases to size the system, support technology selection, provide status and directional support for controls and calibration development, • Problem solving and issue resolution support related to vehicle emissions predictions, • Collaboration with internal suppliers of 1D simulation input data as necessary to ensure a value add output, • Generation of steady state to transient emissions coefficients based on test bed data, • Leading identification of 1D Powertrain Systems CAE tool and/or process enhancement requirements to meet current & future powertrain systems for hybrid vehicles analysis needs focusing on emissions Key Stakeholders, • Hardware Function layer group, • Calibration and controls group, • Engine and vehicle tests Team, • After-treatment components group, • CAE Integration Lead Engineers, • System Design Engineers Skills / Knowledge / Experience Essential, • Excellent understanding of engine out emission fundamentals and commonly used methods for its predictions, • Very good aftertreatment modelling and engineering understanding (as simulation or calibration engineer), • Substantial industrial experience of assessing and verifying vehicle/powertrain emissions (desirable in a CAE environment), • Good analytical capability and breadth of experience in GT-Suite, • Able to identify and respond to the strengths and limitations of computer-based modelling and simulation Desirable, • Experience of Powertrain system, engine and aftertreatment xrnqpay physical test and/or calibration, • Proven success in complex system model validation, optimisation and correlation, • Experience in 1D vehicle and powertrain system model development Your Profile Desirable Skills / Knowledge / Experience, • Understanding of aftertreatment technologies and their role in delivering Vehicle Systems Emission performance, • Self-motivated, with strong personal management capabilities, • Able to work with minimal supervision, engaging a wide range of stakeholders effectively, • Have the ability to balance different technical and business parameters to deliver the right solution for the customer and business, • Ability to manage time effectively and to balance delivery to several projects within the same time frame

team in Leamington Spa. You will be required to work from the office on a hybrid basis, 4 days a week. As a Senior Mechanical Design Engineer you will join an experienced team to complete HVAC designs for residential, commercial, retail, colleges, storage units, museums and healthcare facilities. As Senior Mechanical Design Engineer you will be expected to complete detailed mechanical designs including heating, ventilation, domestic hot and cold water systems and air-conditioning using AutoCAD and Revit. You will also be expected to complete 2D and 3D models, perform heat load calculations, thermal comfort modelling (TM52/TM59), IES energy modelling and digital twin simulation, duct sizing, pipe sizing, and equipment selection using relevant software (e.g. Revit, AutoCAD, HAP, or Elite). You will also prepare and review mechanical drawings, schematics, simulations and technical specifications in accordance with building codes, sustainability goals, and project requirements. Site visits will also be necessary, across the local area to check design clashes. The role will also involve; -Heating and cooling load assessments. -Designing to BIM level 2 in accordance with British Standards PAS 1192-5. -Low-carbon system design (ASHPs, GSHPs, WSHPs, VRF/VRV) -Mechanical ventilation & heat recovery (MVHR) -Building Management System (BMS) integration • Attend internal external meetings with Clients and Contractors on site to resolve design issues/queries and align project objectives. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction. -Liaise with design teams, architectural teams and site engineers to ensure designs are installed to specifications and client requirements. -Client meetings to discuss design briefs and project progress. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role offers a competitive salary, flexible benefits and varied commercial, healthcare and residential projects across the UK. You will be required to work from the office for 4 days a week. You will also have the chance to progress your career, mentor team members and have the option to work on varied projects, alongside an experienced and friendly team. As a Senior Mechanical Design Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy completing detailed HVAC designs for residential, commercial, healthcare and industrial units (sheds) using AutoCAD and Revit You are also required to have experience managing projects, mentoring team members and have a detailed knowledge PAS 1192-5, RIBA stage 4 and other relevant codes. You will also be expected to have a keen understanding of BREEAM and net zero and live within commutable distance of Leamington Spa. If this role is of interest to you, please contact Jordanna Morris at Aztrum

Role: Algorithm Software Engineer (C#) Location: Coventry - Hybrid (2 days per week onsite) Salary: £60,000 - £70,000 Right to work: You must already have the right to work in the UK (no sponsorship available). About the business This is an opportunity to join a rapidly scaling, innovation-led technology company working on highly complex engineering and data-driven products. The organisation operates in a fast-moving, research-focused environment where advanced mathematics and algorithm development are central to its solutions. You'll be joining a multidisciplinary team of engineers, scientists, and software specialists working on challenging real-world problems that require deep technical thinking and creativity. What you'll be doing In this role, you will design and implement sophisticated mathematical and scientific algorithms in C#. You will work closely with domain specialists to translate theoretical models into high-quality, efficient, and reliable software components. You will play a key role in improving existing systems, developing new capabilities, and contributing to the technical direction of algorithm-based projects. This position offers a hybrid working model, requiring collaboration in the Solihull office two days per week. What you'll need (Essential) We are looking for someone who can demonstrate: Strong commercial experience in C# , particularly in technical, scientific, or mathematical software development A Master's degree or PhD in a STEM subject such as Mathematics, Physics, Engineering, or Computer Science A solid understanding of advanced mathematical principles Experience working with complex algorithms and numerical methods Knowledge of 3D vector mathematics and spatial calculations A proven ability to solve difficult technical problems in innovative ways Strong analytical and logical reasoning skills Nice to have (Desirable) It would be advantageous if you also have experience with one or more of the following: Inertial navigation systems , particularly in robotics, autonomous systems, or drone technology Sensor fusion techniques , including Kalman filtering or similar approaches Practical experience using MATLAB for modelling, simulation, or data analysis What's in it for you Competitive salary between £60,000 and £70,000 Flexible hybrid working model Opportunity to work on technically challenging and impactful projects Collaborative, highly skilled engineering environment Career development within a growing technology organisation TPBN1_UKTJ

Role: Algorithm Software Engineer (C#) Location: Coventry - Hybrid (2 days per week onsite) Salary: £60,000 - £70,000 Right to work: You must already have the right to work in the UK (no sponsorship available). About the business This is an opportunity to join a rapidly scaling, innovation-led technology company working on highly complex engineering and data-driven products. The organisation operates in a fast-moving, research-focused environment where advanced mathematics and algorithm development are central to its solutions. You'll be joining a multidisciplinary team of engineers, scientists, and software specialists working on challenging real-world problems that require deep technical thinking and creativity. What you'll be doing In this role, you will design and implement sophisticated mathematical and scientific algorithms in C#. You will work closely with domain specialists to translate theoretical models into high-quality, efficient, and reliable software components. You will play a key role in improving existing systems, developing new capabilities, and contributing to the technical direction of algorithm-based projects. This position offers a hybrid working model, requiring collaboration in the Solihull office two days per week. What you'll need (Essential) We are looking for someone who can demonstrate: Strong commercial experience in C#, particularly in technical, scientific, or mathematical software development A Master's degree or PhD in a STEM subject such as Mathematics, Physics, Engineering, or Computer Science A solid understanding of advanced mathematical principles Experience working with complex algorithms and numerical methods Knowledge of 3D vector mathematics and spatial calculations A proven ability to solve difficult technical problems in innovative ways Strong analytical and logical reasoning skills Nice to have (Desirable) It would be advantageous if you also have experience with one or more of the following: Inertial navigation systems, particularly in robotics, autonomous systems, or drone technology Sensor fusion techniques, including Kalman filtering or similar approaches Practical experience using MATLAB for modelling, simulation, or data analysis What's in it for you Competitive salary between £60,000 and £70,000 Flexible hybrid working model Opportunity to work on technically challenging and impactful projects Collaborative, highly skilled engineering environment Career development within a growing technology organisation

Software Engineer £55,000 - £70,000 2-3 days onsite in Coventry We are looking for a Software Engineer to join a Research & Development team and help develop cutting-edge algorithms and advanced mathematical and scientific software. This role offers the opportunity to work on advanced mathematical and scientific software, contributing directly to the performance and success of products used by professionals worldwide. You will collaborate with a multidisciplinary engineering team that includes research scientists, electronics hardware engineers, embedded software developers, cloud/backend engineers, and mobile app developers. Your work will play a critical role in shaping both current and future product capabilities. Key Responsibilities Design and develop advanced algorithms for measurement and motion analysis Develop and optimise sensor fusion algorithms combining data from multiple sensors Build and maintain high-performance C# scientific and mathematical libraries Apply 3D vector mathematics and advanced mathematical models to real-world problems Collaborate with cross-functional teams across hardware, embedded, mobile, and cloud development Analyse complex datasets and improve algorithm accuracy, efficiency, and reliability Contribute innovative ideas to advance product capabilities and technical performance Essential Skills & Experience Strong C# development experience, particularly building scientific, mathematical, or computational libraries Strong understanding of advanced mathematics and algorithm design Experience working with 3D vector mathematics and spatial calculations Excellent analytical and problem-solving skills Demonstrated ability to develop innovative technical solutions Desirable Skills Experience with Inertial Navigation Systems (INS) Experience developing software for drones, robotics, or motion-tracking devices Experience implementing Sensor Fusion techniques such as Kalman Filters Experience using MATLAB for algorithm development or simulation

Your responsibilities: Development of methodologies for engine out emission prediction Develop models for exhaust system to capture altitude and off ambient conditions impact on tail pipe emissions Supporting 1D modelling of vehicle emissions virtual test cases to size the system, support technology

As a Founding AI Simulation and Control Engineer, you will have direct responsibility for the development and deployment of Optimal's AI agents at the most advanced greenhouses in the world. Adapt Optimal’s state-of-the-art simulation models to the greenhouse of a new customer and train the models

Lead Manufacturing Simulation EngineerContract | Onsite | GaydonContract Details£37 per hour - Inside IR356-month or 12-month contract availableImmediate start requiredOnsite role - GaydonRole OverviewWe're looking for a Manufacturing Simulation Engineer to lead the development of Discrete Event Si

Job Title: Location: Gloucester Pay Rate: Negotiable Contract length: 12 MonthsRole Summary/Purpose:To gain a deep understanding of existing aerospace component manufacturing processes and equipment, quantify how they perform, and use this insight to inform the design, implementation and optimisat

About the Opportunity: A leading UK engineering organisation is expanding its Real-Time Simulation & Experimentation capability and is seeking skilled engineers with strong C# or C++ experience in real-time, embedded, modelling, hardware-integrated or safety-critical environments. It is a hands-on e

This role focuses on leading and enhancing AI-driven simulation applications across various engineering sectors. A deep-tech company in Greater London seeks a Principal Software Engineer. This position emphasizes a culture of excellence in software engineering and offers opportunities for profession

Summer Intern, PhD, Machine Learning Engineer, Simulation. The Waymo Simulation team builds state-of-the-art simulations of realistic environments for testing and training the Waymo Driver, which is Waymo's autonomous driving technology. They develop industry-leading simulation solutions using advan

Modeling, Simulation, and Analysis engineering or related industry background. Anduril is seeking a Software Engineer to join the Maneuver Dominance Advanced Capabilities team in our London office. You will lead development of modelling & simulation applications, infrastructure and services to enabl

A robotics startup in Greater London seeks a Simulation Engineer to develop simulation tools for soft and hybrid robotics. The role requires a Master's or PhD in Mechanical Engineering or related fields and experience with simulation tools such as Abaqus or ANSYS. You will run high-fidelity simulati

A cutting-edge AI company based in Greater London is seeking a Senior Simulation Engineer to develop innovative hardware simulations for AI accelerators. This role offers an exciting opportunity to work in a fast-paced environment, collaborating with hardware and software engineers to drive impactfu

Due to continued growth in Simulation at Triumph, we have created an additional Simulation Engineer position (internal applicants only). Senior Design Engineer- Simulation (DE383). Ensure consistent, high‑quality simulation modelling in collaboration with the wider simulation and vehicle teams.

A leading autonomous technology company based in London is seeking a research engineer to enhance ultra realistic AV simulations. Reporting to an Engineering Manager, the successful candidate will collaborate with teams, design innovative experiments, and integrate large foundation models into train

A recruitment agency is looking for an entry-level engineer to support customer projects in automotive communication and simulation.

Be part of a world class research engineering team to grow the state‑of‑the‑art of ultra realistic AV simulations using foundation models. The Simulator team builds state‑of‑the‑art simulations of realistic environments for the testing and training of the Waymo driver. In this hybrid rol

A leading AI company in Greater London is seeking a talented individual to develop LM/VLM-powered agents for generative simulation.

A defense technology firm in Greater London is seeking a Software Engineer to lead the development of advanced modeling and simulation applications.

A growing engineering technology firm in Greater London seeks an advanced mathematical model developer. Collaborate with a talented team to enhance cutting-edge cloud-based software, tackling complex engineering challenges.

Partner with Operations Analysis and other Software Engineering team members to deliver simulations capabilities to create high fidelity immersive environments. Anduril is seeking a Software Engineer (Visual Simulation) to join the Maneuver Dominance Advanced Capabilities team in our London office.

As a Simulation and Modelling Engineer, you will model and analyse complex systems and the interactions between them using MATLAB / Simulink-based tools. Understanding of system architecture, engineering principles, and engineering processes. You will apply your problem-solving ability and engineeri

Help to build and lead a world class research engineering team to advance the state of the art of ultra realistic AV simulations using foundation models. The Waymo Driver has provided over ten million rider-only trips, enabled by its experience autonomously driving over 100 million miles on public r

A leading technology provider in the United Kingdom is seeking two full-time Simulation Software Engineers to join their team in Stevenage. The role focuses on developing and maintaining simulation software, requiring strong modern C++ expertise within a structured engineering environment.

A leading autonomous driving technology firm in Greater London is seeking a leader for their research engineering team. The role involves advancing the state of AV simulations using foundation models and collaborating with renowned Machine Learning teams.

Bachelor's or Master's degree in Mechanical Engineering, Electrical Engineering, or a related field with an emphasis on multi-physics simulation and systems engineering; PhD preferred. You will leverage cutting-edge simulation tools such as MATLAB, Simulink, Dymola, and JuliaHub to create high-fidel

A technology consulting firm in the UK is looking for a Simulation and Modelling Engineer to model and analyze complex systems using MATLAB and Simulink. This role involves close collaboration with multidisciplinary teams, contributing to system design, analysis, and testing throughout the engineeri

A deep-tech company in London seeks a Senior Software Engineer to design and architect scalable systems for handling simulation data. This role offers a hybrid work setup and focuses on innovating in engineering and manufacturing through AI-driven solutions. Candidates will be involved in best pract

A forward-thinking technology company in Greater London is seeking a Senior Mechanical Simulation Engineer. The successful candidate will lead the design and simulation of opto-mechanical systems critical to Optical Tensor Processing Units (OTPUs).

By enabling high-fidelity, multi-physics simulation through AI inference across the entire engineering lifecycle, PhysicsX unlocks new levels of optimization and automation in design, manufacturing, and operations — empowering engineers to push the boundaries of possibility. We are building an AI-

We are looking for a Senior Simulation Engineer with experience of building software simulations of new hardware to develop models of our ground‑breaking AI accelerators. Work with hardware, software, and ML engineers in a highly collaborative hardware‑software co‑design methodology. Computer

The role is the principal virtual discrete event simulation engineer for Manufacturing Engineering and will be responsible for leading vehicle or system programmes Discrete Event Simulation function, modelling the process flow from concept thru to the delivery phase to JOB1 + 90 days. Discrete Event