Bms jobs in Jersey City, New JerseyCreate job alerts

The Infectious Disease Physician (IDP) is an expert in infectious disease management, responsible for delivering advanced and comprehensive clinical and preventative care, intervention strategies, and multidisciplinary care coordination to improve community health, patient outcomes, and the quality

Share relevant information with care partners to support optimal patient outcomes. Collaborate with the Director of Behavioral Health to support clinical goals related to adolescent and adult mental health services. Communicate and coordinate care with ACS, case managers, and other collateral contac

Commitment to culturally competent, patient-centered care. Experience in an FQHC, community health center, or safety-net healthcare organization, preferred. The NPWH practices collaboratively within a multidisciplinary care team to support the mission of BMS Family Health and Wellness Centers and to

Job Description This position is responsible for assisting in the operation of department. An individual in this position will be expected to perform additional job-related responsibilities and duties throughout the facility as assigned and or as necessary. In addition to the responsibilities below, the Systems Specialist I performs routine technical duties in troubleshooting and repairing of components within building automation field cabinets, sensors, and related controls. They typically work under the direct supervision of a higher-level building automation technician but may be asked to perform tasks at the capacity of a BMS Systems Specialist II. Requirements Essential Functions: An individual must be able to successfully perform the essential functions of this position with or without a reasonable accommodation. • Troubleshoot and make necessary repairs to building-automation-system field cabinets, including communication devices, printed circuit boards, power supplies, electrical/electronic controls, sensors, and transducers., • Take initiative and responsibility safely performing the point-to-point checkout of end devices, e.g., use multimeter to check continuity and/or resistance of sensors, verifying sensors with calibrated meters, breaking connection at end devices to verify IO channel assignments, verifying valve stroke and fail positions, etc., • Download modules and assist in bringing networks online., • Communicate technical issues to senior level technicians., • Maintain field markups and perform warranty related service calls., • Assist with maintaining regular system backups during project., • Assist more senior level technicians in the startup of systems and equipment., • Able to document, demonstrate and exercise non-complex systems for third party commissioning support and testing., • Provide project demonstration and training as required for customers., • Report to work on time and ready to perform assigned tasks., • Maintain company tools, test equipment, and material., • Create thorough daily reports, per project or daily duty, and submit to Albireo project team and Operations Supervisor., • Stay busy and look for opportunities to advance project completion., • Communicate with jobsite personnel from other trades to complete project objectives., • Be comfortable in using/navigating the company’s building automation suite and offerings., • Identify issues and make minor program and graphic changes., • Support a culture based on open/honest dialogue and involvement with all team members that demonstrates the value of their input and engagement in improving performance., • Support a culture of high performance and accountability in employee and site safety as well as other aspects of the business. Knowledge & Skills required: • Equivalent experience, vocational school, or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field is preferred., • Experience in high-availability environments like data centers, hospitals, or government facilities., • Familiarity with the Automated Logic product line and software suite is a preferred but not required., • Self-starter attitude that is inquisitive, intuitive and has a willingness to learn and grow., • Ability to document daily tasks, plan and prepare for tasks assigned., • Strong problem-solving skills, critical thinking, and self-initiative., • Excellent written and verbal communication, interpersonal skills; high quality document and report preparation. Compensation Range: $34-$37 Hourly DOE Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a Senior HVAC Technician (Snr HVAC Tech) to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC technician with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Service Technician will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Service Tech will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Service Technician will • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Description: The Physical Therapist (PT) provides evidence-based physical therapy services to patients across the lifespan, focusing on restoring functions, improving mobility, relieving pain, and preventing disability. The PT works with primary care providers, specialists, and interdisciplinary care teams to deliver coordinated, patient-centered care in an outpatient community health setting. The PT is compassionate, adaptable, and committed to serving diverse and medically underserved populations. This is an exempt, part-time opportunity (21 paid hours per week). ESSENTIAL FUNCTIONS This job description is not designed to be a complete list of the essential functions, duties, and responsibilities required for this position. Reasonable accommodation may be provided to enable individuals with disabilities to perform essential job functions. Clinical Care • Evaluate patients and develop individualized treatment plans based on clinical findings, functional goals, and patient needs, • Provide therapeutic interventions including therapeutic exercise, manual therapy, neuromuscular re-education, gait training, and patient education, • Monitor patient progress and modify treatment plans as clinically indicated, • Maintain accurate, timely, and compliant clinical documentation Care Coordination & Collaboration • Collaborate with primary care providers, specialists, and care teams to ensure integrated and coordinated care, • Provide patient and family education on treatment plans, home exercise programs, injury prevention, and self-management strategies, • Participate in interdisciplinary case conferences and care planning as needed Quality, Compliance & Patient Safety • Ensure compliance with federal, state, and organizational policies, including documentation and billing standards, • Participate in quality improvement initiatives, audits, and accreditation readiness activities, • Maintain licensure, certifications, and continuing education requirements Program Support & Professional Practice • Contribute to the development and growth of rehabilitation services, • Support best practices in patient-centered, trauma-informed, and culturally responsive care, • Participate in staff meetings, trainings, and professional development activities REQUIRED QUALIFICATIONS AND COMPETENCIES • Doctor of Physical Therapy (DPT) or master's degree in physical therapy from an accredited program, • Current, unrestricted New York State Physical Therapy license, • CPR/BLS certification, • Strong clinical, communication, and interpersonal skills PREFERRED QUALIFICATIONS AND COMPETENCIES • Experience in an FQHC, community health center, outpatient clinic, or safety-net setting, • Experience working with diverse, underserved, or high-risk populations, • Bilingual (Spanish or other languages) preferred, • Experience with electronic health records (EHR) WORK ENVIRONMENT AND PHYSICAL DEMANDS • Clinical setting with direct patient contact., • Requires standing, walking, bending, and occasional lifting consistent with clinical practice., • Ability to communicate, hear, see, and feel without limitations., • May require extended periods of computer use for documentation. Requirements:, • A mission-driven environment where your work directly benefits the community., • A supportive, collaborative team that values your expertise and well-being., • Professional growth opportunities within a respected FQHC., • A culture of compassion, inclusivity, and respect for all. BMS Family Health Center is an Equal Opportunity Employer (M/F/D/V). We welcome and encourage applicants from all backgrounds. All qualified individuals will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity/expression, national origin, citizenship status, disability, age, marital or family status, or veteran status. If you’re a dedicated Physical Therapist who is ready to make a meaningful impact in a supportive community health setting, we’d love to meet you. Apply today and help us deliver care that truly makes a difference! Compensation details: 80000-81000 Yearly Salary PI14dda8704f49-36205-39138698

Job Description ACS System Associates Inc. is currently seeking experienced HVAC Technician to join and become an integral part of our team. You must possess a strong knowledge base of HVAC installation and troubleshooting skills, as well as have a solid understanding of related controls and building automation systems (DDC). This is a non-union position. Selected candidate will be a team player who can complete tasks that include but are not limited to: • Refrigeration Equipment pressure test, vacuum, and charging, • Ability to start up and troubleshoot VFDs and Starters, • Strong knowledge of Commercial Air-Conditioning, Heating, Water Source Heat Pumps & Rooftop Packaged HVAC Systems, split systems, chillers, controls, BMS, etc., • Refrigeration Equipment pressure test, vacuum and charging, • Familiarity with BMS integration. This includes both hardware and software component REQUIREMENTS * High school diploma and technical school training • EPA Universal certification-608, • OSHA 40-hour SST, • Valid driver's license, • Daiken and Mitsubishi experience is a plus but not required, • NATE Certified is a plus Compensation * Competitive salary. • Medical and dental benefits., • 401k retirement plan., • Paid holidays, vacation and sick time., • Transportation allowance Job Type: Full-time Company Description* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts. • Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity., • We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion., • Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential. With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts.\r\n\r\n Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity.\r\n\r\n We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion. \r\n\r\n Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.

Job Description We are looking for an HVAC Controls Technician to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: • Install new High End Residential BMS systems, • Inspect and perform equipment repairs and replacements, • Perform routine preventative maintenance, • Respond to emergency maintenance requests, • Adhere to all safety policies and procedures Qualifications: • OSHA site safety or supervisor, • Previous experience in HVAC or other related fields, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload, • Strong problem solving and critical thinking skills

Job Description Job Title: Commercial HVAC Service Technician AND Pipefitter Location: Manhattan, Brooklyn, Queens, Bronx Pay: $30-50 (depends on position and experience) Job Description We are seeking a dedicated and experienced Commercial HVAC Technician to manage complex installations, start-ups, controls integration, and service work across our active project portfolio. This role requires a technician capable of independently installing, troubleshooting, commissioning, and servicing commercial HVAC systems, while effectively communicating with both field crews and clients. Responsibilities • Take ownership of complex HVAC installations, start-ups, and service work., • Integrate controls and ensure seamless operations across active projects., • Independently install, troubleshoot, commission, and service commercial HVAC systems., • Communicate effectively with field crews and clients, ensuring clarity and professionalism., • Deliver systems that operate efficiently and correctly on the first installation. Essential Skills • Minimum 5 years of hands-on commercial HVAC experience., • Expertise in installing and commissioning WSHP, VRF, RTU, and DOAS systems., • Strong electrical and controls background, capable of wiring, troubleshooting, and interlocking HVAC equipment independently., • Solid working knowledge of VFDs, VAV boxes, sensors (CO2, temperature, pressure), time clocks, relays, transformers, and refrigerant leak detection., • Ability to read and interpret mechanical, electrical, and controls drawings, schematics, and submittals., • Excellent troubleshooting and problem-solving skills., • Strong written communication skills for producing clear service and start-up reports., • Strong verbal communication skills for engaging professionally with clients, general contractors, architects, and owners., • Valid driver's license with a clean driving record. Additional Skills & Qualifications • EPA Section 608 Universal Certification., • NYC FDNY G-60 (Gas Qualification — Refrigerant Systems)., • NYC FDNY F-60 (Fire Safety / Refrigerant Systems)., • OSHA 30-Hour Construction Safety Certification., • NYC Site Safety Training (SST) Card., • Experience with BMS/building automation systems (Automated Logic, Siemens, Honeywell, Tridium/Niagara)., • Manufacturer-specific training on major equipment (Daikin, Mitsubishi, LG, Trane, Carrier, AAON)., • Experience working on NYC commercial projects., • Bilingual (English/Spanish or English/Russian) is a plus., • Experience training and mentoring junior technicians. Why Work Here? Join a team that values expertise and professionalism, providing opportunities for growth and development in a supportive work environment. Benefit from engaging with a diverse portfolio of projects and take pride in delivering high-quality solutions that meet client expectations. Work Environment Field Coordination & Communication: Engage with field foremen and crews to prepare systems for start-up, testing, and final inspections. Communicate clearly and professionally with general contractors, project managers, owners, and architects. Write detailed, accurate, and well-organized service and start-up reports. Represent the company with intelligence, clarity, and professionalism on every jobsite. Job Type & Location This is a Contract position based out of Brooklyn, NY. Pay and Benefits The pay range for this position is $50.00 - $65.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Brooklyn,NY. Application Deadline This position is anticipated to close on Jun 23, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description HVAC Specialist / Building Engineer (Commercial – Non-Union) We are seeking a highly skilled HVAC Specialist / Building Engineer to join the operations team at a premier Class A commercial office property. This is a non-union position offering the opportunity to work with sophisticated building systems in a professional environment. This role is primarily focused on the operation, maintenance, and troubleshooting of HVAC systems, while also supporting general building operations as needed. Key Responsibilities • Perform preventive maintenance and repairs on HVAC systems and related mechanical equipment, • Operate and maintain a rooftop cooling tower servicing approximately 25 air handling units (AHUs), • Monitor and manage building systems through a Building Management System (BMS), • Replace belts, filters, and perform routine servicing of air handlers, • Lubricate fan shafts and motor bearings, • Inspect and service electrical components, including connections and contactors, • Pull and clean strainers, spray heads, and associated components, • Monitor cooling tower water levels and make necessary adjustments, • Troubleshoot system issues and respond to service calls in a timely manner, • Assist with general building maintenance and support overall facility operations Qualifications • Minimum 10+ years of hands-on HVAC experience in a commercial building environment, • Strong knowledge of air handlers, cooling towers, and mechanical systems, • Experience working with BMS systems (monitoring and basic troubleshooting), • Solid understanding of electrical and mechanical components related to HVAC systems, • Ability to work independently and manage multiple priorities Certifications (Required) • FDNY Fire & Life Safety Director (F-89 / FLSD), • FDNY S-12 (Citywide Standpipe Certificate), • FDNY S-13 (Citywide Sprinkler Certificate)

Job Description Well established NYC based firm with an extensive track record of success in the development and acquisition of office, residential, retail and hotel properties has an immediate need for a Non-Union Commercial Building Superintendent with at least 5 years of experience with thorough knowledge of building systems & equipment/procedures, strong staff supervision & administration skill as well as troubleshooting and analytical skills. General Shift Time: M – F 8AM-5PM Super should be well-rounded in all mechanical systems, specifically: • water cooled VRF system with DOAS, • cooling towers/generators. MUST HOLD LOW PRESSURE BOILER CERTIFICATION Must be proactive and have experience in building management principals with the ability to direct & supervise staff, inspect the building/building systems, and recognize & address issues before they arise as well as interact with tenant/management in a professional manner at all times. Ability to adapt and perform in a fast-paced environment, quickly and thoroughly become familiar with all entire building, building systems, and protocols. Enforce and uphold all building protocols, rules, and regulations. Perform all duties in a professional workmanlike manner. Able to work under minimal supervision & directly with supervisors. Ability to review and interpret work orders, operating instructions, diagrams, building plans, and mechanical equipment drawings. Experience with building systems including HVAC systems, fire protection systems, security/access systems, elevators, BMS, work order systems, etc. Experienced performing all handyman skills such as, but not limited to plumbing, electrical, HVAC systems, lighting, carpentry, drywall, plastering, door/lock repair, etc. Available to respond to emergencies on a 24/7 basis. Flexibility a must for evenings, weekends, holidays, unscheduled shifts, and special assignments as determined by the needs of the business. Must have excellent verbal, written communication skills and basic computer skills Strong work ethic, reliable, punctual and dependable Hourly Pay Rate: $43/hr Pay rate with FLSD Certification: $45/hr Full Time with benefits including: · Medical · Dental · 401K · Transit check · Paid Time Off Please submit resume with cover letter. High School Diploma/GED required. Applicant must pass a drug screening. Job Type: Full-time Pay: From $43-$45 per hour Powered by JazzHR J7vi0R9y2w

We’re supporting a search for our European banking client's New York office to fill this Facilities & Real Estate Management role. This position oversees data centers, BCM sites, and overall operational facilities, ensuring seamless and compliant day-to-day operations across multiple functions. Position Summary: Primary responsibility is the oversight and coordination of Real Estate and Operational facilities management for our European banking client's New York office. Ensures that the facility, including its data centers, BCM sites and associated equipment, run safely, efficiently and smoothly. Essential Duties and Responsibilities: Exercises managerial responsibility for Real Estate, Building Services and Office and Support Services including: • Organization for Data Center facilities and its real estate operation in a prudent and ethical manner., • Develops / implements strategies and business plans consistent with local management and the Global Functional Lead’s objectives to provide intelligent solutions to clients and to ensure compliance with the bank’s standards., • Project management of real estate and facilities management projects., • COI Process when needed, • Responsible for the day-to-day management and operation of Real Estate and Building Services., • Oversight of various vendors that directly manage the following facilities operations and tasks:, • HVAC: Mechanical Generator and cooling tower maintenance and Inspection, • Electrical UPS Maintenance, • Electrical Infrared Test, • BMS Systems operation, • Fire Systems, • Radio and Fire Warden coordination, • Additional infrastructure oversight, • Cleaning and custodial services, • Light replacement, • Office maintenance and repairs, • Desk and location placement, • Rent processing, • Facilities management financial controlling, • Physical security backup, • Quarterly reporting to headquarters, • Coordination with internal and external auditors Experience /Qualifications/Education: • Minimum 10 years of professional experience, • Strong customer service focus, budgeting and communication skills required, • Strong business systems knowledge, • Proficiency with safety and compliance, • Strong organizational skills, • Relevant professional certifications are a plus but not required: Certified Facility Manager (CFM), Facilities Management Professional (FMP)

For over 100 years we have been dedicated to providing the best residential property management to co-ops, condos and rental properties throughout New York City and beyond. Ranked #1 among New York City's residential management companies, our mission is to provide our clients with superior and responsive management and accurate financial reporting that they can count on to improve their quality of life and valuation of their homes. Exciting opportunity in our managed buildings throughout NYC - we are seeking Handymen to join our team. We are seeking an experienced handyman who will provide support and assistance to the building manager on daily operations keeping the residential building running efficiently and properly. Description of Job The applicant must have relevant building maintenance skills including, plumbing, electrical, boiler, roof, windows as well as minor plaster and painting. Must be a dynamic, creative, self-starter with experience in all basic building systems (domestic water pumps, hot water, sump pumps etc, heat exchanges, cooling towers, fire and safety as well as electrical systems) as well as willing to undertake tasks such as light bulb replacement, snow removal and other duties deemed necessary by the Resident Manager. Responsibilities include general maintenance, orderliness, and cleanliness to ensure the facilities and equipment in the building are in good working order at all times. Other Responsibilities: • Janitorial maintenance (cleaning facilities as needed), • Builds and repairs cabinets, counters, closets etc. as needed Making minor electric repairs, plastering and painting as needed, • Minor plumbing which includes fixing leaks, washers, minor pipe replacements Repairs entrance and internal doors, locks, hinges, • Reporting any concerns to management Perform daily walk throughs of the mechanical spaces and building grounds, • Perform and complete work orders through BuildingLink, • Communicate directly with residents through a building email Undertake duties as assigned or emergency task Minimum Qualifications: • At least 5 years' experience in residential buildings and experience interacting with tenants Proven experience as handyman, • Experience with hardware tools, electrical equipment, and power tools, • Understanding of BMS, electrical, plumbing, and HVAC systems such as: Chillers, cooling towers, heat pumps, gas boilers, pumps, • General carpentry knowledge/skills, such as: hanging doors, cut holes and hinges on doors, trim, crown molding, deck and framing skills., • Must be able to effectively communicate (oral and written) with all employees, contractors and vendors, • Dependability, good manners and excellent communication skills, • Must be able to lift up to 50lbs. Immediately responds to building emergencies on a 24-hour basis, • High school graduate, a certificate in trade school or equivalent work experience, • Ability to resolve problems and adhere to safety guidelines, • Licenses such as S12, S13, P99, etc. (Preferred) Applicants without a resume will NOT be considered.

Job Description Job Overview: We are seeking seasoned Senior Commercial HVAC Service Technicians to join our elite Field Operations team. With 10 years of hands-on field experience, the ideal candidate will be an ace mechanic capable of diagnosing, installing, and servicing advanced HVAC systems. This role requires deep knowledge of residential and commercial systems—especially VRF/VRV technologies, make-up air units, and ideally boilers + controls. If you're a top-level technician ready to step into a leadership position with room to grow, we want to hear from you. Key Responsibilities: • Oversee and perform installation, maintenance, and service calls on residential and commercial HVAC systems, • Diagnose and service VRF/VRV systems (e.g., Mitsubishi, Daikin, LG), • Maintain and repair make-up air units with airflow and combustion tuning, • Troubleshoot heating and cooling systems efficiently and independently, • Interpret blueprints and schematics for accurate installations, • Perform preventive maintenance and ensure system optimization, • Communicate clearly with clients to explain findings and service recommendations Qualifications: • 10 years of experience as a Residential/Commercial HVAC technician, • Proven ability to work on VRF/VRV systems and ventilation setups, • Proficiency with make-up air units, economizers, and duct systems, • Boiler experience (low- and high-pressure systems) highly preferred, • EPA Universal Certification (required), • Valid driver's license with clean driving record, • Excellent organizational and communication skills, • Able to manage service calls independently and effectively Preferred Qualifications: • OSHA 10/30 Certification, • NATE Certification, • Factory training on Mitsubishi, Daikin, or LG VRF systems, • Familiarity with BMS controls and system integration, • Experience with chillers

Engineering Excellence Manager ISS Facility Services — Building the Future of Engineering Operations At _, we believe people make places. We are seeking a dynamic and operationally driven Engineering Excellence Manager to lead mission-critical maintenance operations and elevate engineering performance across high-profile facilities environments. This is an opportunity to join a global organization where operational excellence, innovation, safety, and leadership come together to create world-class workplace experiences. If you are passionate about engineering operations, thrive in high-performance environments, and know how to lead teams with accountability and precision — we want to hear from you. Key Purpose The Engineering Excellence Manager will lead and supervise the Operations & Maintenance Team while driving operational consistency, engineering excellence, and best-in-class facility performance. This leader will oversee maintenance activities, preventive maintenance programs, vendor coordination, safety compliance, operational documentation, and critical systems reliability. This role is essential in ensuring uninterrupted facility operations while fostering a culture centered around safety, accountability, collaboration, and continuous improvement. What You’ll Be Responsible For Operational Leadership • Lead and supervise engineering and maintenance operations teams, • Drive preventive maintenance execution and work order completion, • Ensure all PMs and corrective maintenance activities are completed on schedule, • Maintain operational excellence across building systems and utility infrastructure, • Coordinate operational modifications including Lockout/Tagout and critical switching activities Engineering & Technical Oversight • Maintain and manage Operations & Maintenance documentation libraries, • Review and maintain SOPs, MOPs, and EOPs for site operations, • Support capacity planning, reporting, and equipment evaluations, • Assist with contractor/vendor management and project coordination, • Oversee inventory management of spare parts, tools, and maintenance equipment Safety & Compliance • Champion ISS HSEQ standards and Safe Systems of Work, • Ensure contractor and vendor safety compliance while preserving critical operations, • Support emergency response and corrective maintenance activities on a 24/7 basis, • Ensure compliance with client, company, and governmental regulations Team Development • Hire, coach, mentor, and develop engineering talent, • Conduct performance evaluations and corrective action plans, • Foster a collaborative, resilient, and accountable team culture Success Looks Like • High-performing and engaged maintenance teams, • Consistent completion of preventive maintenance and work orders, • Safe, compliant, and efficient operations, • Reduced downtime and operational delays, • Accurate maintenance reporting and documentation, • Exceptional client satisfaction and operational reliability What You Bring Required Experience • 10+ years of technical services or facilities engineering experience, • 3+ years leading engineering operations as an Engineering Manager, Chief Engineer, or equivalent, • Experience in critical environments, integrated facilities management, or data centers preferred, • Strong experience with CMMS platforms and work order management systems, • Knowledge of Building Management Systems (BMS) and automation controls, • Experience managing subcontractors, vendors, and operational KPIs Education & Certifications • BS or AS degree in Electrical/Mechanical Engineering or related field preferred, • Relevant technical licenses/certifications highly valued:, • OSHA, • Boiler Operator, • Refrigeration, • Plumbing, • Licensed Operating Engineer Leadership Competencies • Business insight and operational decision-making, • Organizational agility and collaboration, • Strong communication and stakeholder management, • Ability to manage ambiguity and lead under pressure, • Commitment to accountability, resilience, and continuous improvement Why Join ISS? At ISS, you’ll join a global organization committed to creating places that work, think, and perform better. We empower our teams to innovate, lead with purpose, and deliver exceptional experiences every day. You’ll have the opportunity to: • Lead impactful engineering operations, • Work within mission-critical and high-performance environments, • Grow your career with a global industry leader, • Collaborate with passionate and talented professionals, • Make a measurable impact on operational excellence Apply Today Ready to lead engineering excellence with ISS? HSEQ Compliance: All employees must adhere to Health, Safety, Environment, and Quality (HSEQ) policies and procedures to ensure a safe and compliant work environment. This includes following safety protocols, maintaining environmental responsibility, and upholding quality standards in all tasks. Employees are expected to actively participate in HSEQ training and report any potential hazards or compliance concerns. To Executive Search Firms and Staffing Agencies: ISS Facility Services / Guckenheimer does not accept unsolicited resumes from agencies. All unsolicited resumes will be considered ISS Facility Services / Guckenheimer property, and ISS Facility Services / Guckenheimer will not be obligated to pay a referral fee. This includes resumes submitted directly to Hiring Managers without contacting the ISS Facility Services / Guckenheimer Human Resources Talent Acquisition Department. As a global organization, ISS Group is committed to making the international community more resilient and just for all people. We encourage diversity and inclusion in their broadest terms, including ethnicity, race, age, gender, gender identity, disability, sexual orientation, religious beliefs, language, culture, and educational background. We look to lead our industry by example and to positively influence the market wherever we operate.

Serverfarm is a leading developer and operator of data centers with over 750+ locations and key customer relationships in 45 countries. We're revolutionizing how data centers operate across North America, Western Europe, and Israel, serving the world's leading technology and hyperscale companies. With Manulife Investment Management's acquisition in 2023 and our award-winning InCommand platform we're positioned for explosive growth as AI adoption and cloud migration drive unprecedented demand for data center capacity. A career at Serverfarm means being at the forefront of digital infrastructure innovation, where your work directly impacts how the world's data is managed and secured. As we target 4x growth over the next four years, you'll have unprecedented opportunities to take on new challenges, develop cutting-edge skills, and grow your career across our expanding global operations. Join our team of innovators and help shape the future of sustainable data centers while building a career without boundaries. Serverfarm is seeking an experienced Data Center Mobilization Manager to lead the mobilization of new data center operations, either through greenfield site start-ups or the transition of acquired data centers into the Serverfarm operating model. The ideal candidate will be a Program Manager with experience in data center MEP Operations startup. The role acts on behalf of the business to ensure operational readiness, risk control, and seamless handover into Business-as-Usual operations. Working cross-functionally with Development, Finance, Procurement, People, Product, and third-party service providers, the Mobilization Manager will coordinate, track, and assure all mobilization activities and deliverables through to formal acceptance and handover to the site operational delivery team. • Mobilization Strategy & Governance, • Lead the mobilization strategy for new data center deployments and acquisitions., • Agree Acceptance Criteria for each subsystem and area with Operations Engineering / Development., • Establish mobilization plans, governance structures, and milestones., • Track progress against program timelines and ensure readiness for go-live and handover., • Cross-Functional Coordination, • Function as the central mobilization interface across Development, Finance, Procurement, People, Product, and Operations, • Coordinate internal teams and third-party partners to ensure all mobilization deliverables are aligned and complete., • Ensure mobilization activities support Serverfarm’ s commercial, operational, and customer objectives., • Operational Readiness & Assurance, • Ensure all critical infrastructure is delivered, commissioned, and transitioned in line with Serverfarm design standards, availability targets, and redundancy philosophies., • Confirm readiness for 24/7 mission-critical operations in alignment with contracted customer obligations as part of handover to site operations., • Define and assure the target operational model in line with Serverfarm standards., • Ensure staffing models, training, and competency requirements are met prior to handover., • Review and approve operational documentation including SOPs, MOPs, and EOPs, • Lead readiness reviews and formal go-live approvals., • Ensure compliance with applicable codes and standards including NEC, NFPA, IEEE, CSA (Canada), and local Authority Having Jurisdiction (AHJ) requirements., • Confirm electrical switching procedures, lockout/tagout (LOTO), and emergency operating procedures are in place and validated., • Ensure cooling designs support current and future IT loads, redundancy requirements, and operational efficiency targets., • Review commissioning results, seasonal testing strategies, and mechanical failure response procedures., • Supplier & Transition Management, • Define and mobilize suppliers required to meet warranties and Service Level Agreements., • Function as the primary point of governance with incoming and outgoing suppliers, • Ensure contract obligations, KPIs, SLAs, and mobilization requirements are met., • Support acquisition transitions, including staff transfer oversight where applicable., • Assets, Systems & Data Integration, • Oversee validation of asset registers, O&M documentation, warranties, and maintenance strategies., • Ensure MQTT telemetry data is available on time to operational systems., • Ensure BMS, EPMS, CMMS, & reporting tools are configured to Serverfarm standards., • Support lifecycle planning and fulfilment of critical spare obligations., • Health, Safety & Compliance, • Establish and enforce Serverfarm HSE standards across all contractors, FM providers, and vendors during mobilization., • Ensure compliance with all applicable OSHA (US), provincial/state safety regulations (Canada), NFPA, NEC, CSA, and local AHJ requirements., • Ensure clear HSE governance, roles, responsibilities, and escalation routes are defined and communicated., • Review and approve risk assessments, method statements, and safe systems of work., • Support audits, regulatory compliance, and assurance reviews., • Emergency Preparedness & Response, • Ensure site emergency plans are developed, tested, and aligned with local emergency services., • Support emergency drills, tabletop exercises, and failure scenario simulations., • Validate emergency communications, evacuation procedures, and muster arrangements., • Training, Competency & Safety Culture, • Ensure safety training and certification requirements are defined and met prior to go-live., • Promote a strong safety-first culture across all mobilization activities., • Encourage proactive hazard identification and continuous safety improvement., • Environmental & Sustainability Compliance, • Ensure compliance with environmental regulations related to fuel storage, refrigerants, spill prevention, waste management, and emissions., • Oversee spill response planning and environmental incident readiness., • Support alignment with Serverfarm sustainability and ESG commitments., • Handover to Operations, • Lead the structured handover from mobilization into steady-state site operations., • Confirm performance reporting, governance, and escalation frameworks are embedded., • Support early-life operational stabilization and lessons-learned reviews., • Essential, • Proven experience in data center site start-ups, mobilization, or operational transitions., • Strong understanding of mission-critical data center operations and risk management., • Experience operating in a client-side or owner-operator role., • Strong stakeholder management and cross-functional coordination skills., • Demonstrated ability to manage complex transitions without service disruption., • Strong Program Management experience, • Desirable, • Experience supporting data center acquisitions and integrations., • Knowledge of FM service models and supplier governance, • Familiarity with DCIM, CMMS, and operational reporting platforms., • Personal Attributes, • Highly organized with strong attention to detail., • Calm and decisive in live, high-risk environments., • Confident, challenging suppliers and driving accountability., • Collaborative, pragmatic, and delivery focused., • Travel, • Role involves significant travel (approximately 70%) $140,000 - $170,000 a yearServerfarm is committed to providing an equal opportunity workplace and offers paid time off, paid holidays, 401k and FULL coverage medical, dental and vision. Our compensation philosophy rewards employees for achieving the values and objectives aligned with the company’s goals and strategic initiatives. The listed salary range for this position is an estimate based on the competitive job market. Final compensation will be based on your own individual skills, experience, and location. The above statements are intended to describe the general nature and level of work being performed in this role. They are not intended to serve as an exhaustive list of all possible responsibilities and duties. We encourage you to apply even if your experience isn't an exact match to the job description.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Aypa Power, a Blackstone portfolio company, is a leading developer, owner, and operator of utility-scale energy storage and hybrid renewable projects that power our communities and cities. Our mission is to responsibly decarbonize the grid and make North American energy markets more affordable, sustainable, and efficient. Aypa is well-capitalized and uniquely positioned to lean forward on projects with well-suited deal structures to meet our customers’ needs. We have been at the forefront of energy storage development since our first energy storage project came online in 2018. As a leader in our industry, we have over 22 GW of utility-scale energy storage and hybrid renewable energy projects in development and 33 projects in operation or construction across North America. The Regional Operations Manager reports directly to the Vice President of Operations & Maintenance and acts as a key extension of executive leadership for both field and commercial operations. At Aypa, we are not a passive asset owner, we lead from the front, take pride in true ownership, and set the standard for operational excellence across our growing fleet. The ROM is responsible for the safe, reliable, and compliant day-to-day operation of each utility-scale BESS and Hybrid asset within the Western region, acting as the accountable leader for asset performance, contractor oversight, and the execution of maintenance and repair strategies that maximize availability, optimize revenue, and uphold Aypa’s commitment to best-in-class operations. Responsibilities: • Safety & Compliance Leadership, • Champion a strong safety culture aligned with company and regulatory expectations;, • Ensure compliance with all applicable standards within the western region;, • Lead incident investigations, root cause analysis, and spearhead corrective actions;, • Continuously maintain audit readiness across all assigned sites;, • Operational Performance & Reliability, • Accountable for regional asset availability, reliability, and overall operational performance;, • Consistently reduce return to service time and proactively minimize or mitigate any forced outages;, • Oversee troubleshooting of complex system issues (HV, BESS, SCADA, BMS, inverters, etc.);, • Partner with OEMs to drive safe, urgent, and practical resolutions to equipment failures and underperformance;, • Maintenance Strategy & Execution, • Oversee and coordinate with OEMs to optimize preventative and corrective maintenance programs with a focus on uptime and revenue potential;, • Ensure active execution of maintenance plans and work orders are conducted within industry best practice and safety protocols;, • Support development of long-term asset management strategies and lifecycle planning;, • Proactively coordinate outage planning with Commercial Operations and Asset Management;, • Contractor & OEM Management, • Manage O&M contractors, OEMs, and service providers to ensure performance and accountability;, • Proactively monitor and enforce contractual obligations, including LTSA compliance, and warranty enforcement;, • Drive timely issue resolution and escalation as needed;, • Reduce vendor dependency through increased internal operational capability;, • Financial & Commercial Alignment, • Support regional O&M budgets, forecasting, and cost control initiatives;, • Partner with Asset Management to optimize asset revenue and minimize downtime;, • Provide operational input into financial models, curtailments, and outage impacts;, • Identify cost-saving opportunities and efficiency improvements;, • Cross-Functional Coordination, • Collaborate with Construction to ensure smooth project turnover and COD readiness;, • Support commissioning activities and operational acceptance testing;, • Partner with Digital/IT teams on SCADA, monitoring, and data visibility improvements;, • Ensure alignment with Commercial Operations for outage reporting and availability commitments for each unique asset requirement;, • Reporting & Communication, • Provide daily reporting on asset performance, risks, and operational priorities;, • Communicate effectively with executive leadership and cross-functional teams;, • Escalate critical risks, compliance issues, and any potential operational constraints;, • Other duties as required or assigned. Key Qualifications: • 7+ years of experience in power generation, renewable energy, or industrial operations;, • 3+ years of leadership/management experience;, • Strong knowledge of utility-scale renewable operations (BESS, solar, or similar technologies);, • Proven experience managing contractors, OEMs, and field operations;, • Experience with BESS systems, EMS/SCADA platforms, and inverter technologies;, • Familiarity with ERCOT, CAISO, PJM, or other ISO/RTO markets;, • Knowledge of NERC compliance and CIP requirements;, • Operational leadership and decision-making under pressure;, • Strong technical troubleshooting capability;, • Contract and vendor management expertise;, • Excellent communication and stakeholder management;, • High ownership mindset with bias for action. Compensation and Location: Salary: A base salary commensurate with experience; Bonus: An annual bonus will be awarded based on individual performance and the overall; success of the business; Benefits: Aypa offers an attractive benefits package with excellent health care/dental/vision, 401k matching, unlimited vacation, paid parental leave, and other health/wellness benefits; Location: Remote (USA) with cadence of on-site presence as required. Ability to work in the United States is a requirement; Travel: Regional travel required – up to 50%. Ability to support off-hours or emergency response as needed. At Aypa, we nurture and support a highly diverse team and actively seek to advance fair and inclusive practices in all aspects of what we do. We hire passionate, dedicated, and forward-thinking individuals from different backgrounds and value unique perspectives and experiences. With a focus on belonging, we are committed to providing an inclusive environment for all. Please note: We kindly request that recruiting companies and agencies refrain from contacting us regarding this job posting. We appreciate your understanding and cooperation in respecting our hiring process. Thank you.

Exciting Remote Cobol Developer with Hogan contract opportunity. • Design, code, test, debug and support COBOL programs for batch and online (CICS) processing, • Develop and maintain JCL for job scheduling, scheduling jobs via Control-M or CA-7, • Integrate Mainframe applications with Hogan platforms (assessment engines, reporting modules), • Perform unit testing, code reviews and work with QA to drive defects to resolution, • Troubleshoot production incidents, perform root-cause analysis and implement permanent fixes, • Tune COBOL, DB2 and JCL jobs for optimal throughput and resource utilization, • Participate in Agile ceremonies (daily standups, backlog grooming, sprint demos), • Author and maintain technical design documents, run books and support procedures, • Liaise with business analysts, project managers and operations teams to deliver on time REQUIRED SKILLS & EXPERIENCE • 5+ years hands-on IBM Mainframe development with ANSI COBOL, • Strong experience in CICS (BMS), JCL, TSO/ISPF, • Solid DB2 SQL programming and performance-tuning skills, • Experience working with VSAM files (ESDS, KSDS, RRDS), • Hands-on Hogan experience: installation, configuration, report generation or integration APIs, • Familiarity with Mainframe source control tools (Endevor, ChangeMan or Git for z/OS), • Exposure to job scheduling tools (Control-M, CA-7) and monitoring (SDSF, RMF), • Comfortable in Agile/Scrum development environment, • Excellent analytical, problem-solving and written/oral communication skills

Serverfarm is a leading developer and operator of data centers with over 750+ locations and key customer relationships in 45 countries. We're revolutionizing how data centers operate across North America, Western Europe, and Israel, serving the world's leading technology and hyperscale companies. With Manulife Investment Management's acquisition in 2023 and our award-winning InCommand platform we're positioned for explosive growth as AI adoption and cloud migration drive unprecedented demand for data center capacity. A career at Serverfarm means being at the forefront of digital infrastructure innovation, where your work directly impacts how the world's data is managed and secured. As we target 4x growth over the next four years, you'll have unprecedented opportunities to take on new challenges, develop cutting-edge skills, and grow your career across our expanding global operations. Join our team of innovators and help shape the future of sustainable data centers while building a career without boundaries. The Data Center Operations Energy Planner is responsible for forecasting, monitoring, optimizing, and governing energy usage across one or more mission-critical data center facilities. This role serves as the central point of accountability for power capacity planning, energy cost management, utility coordination, and operational energy efficiency initiatives. The Energy Planner partners closely with Operations, Engineering, Finance, Sustainability, and external utility providers to ensure reliable, cost-effective, and compliant energy delivery while supporting business growth and uptime commitments. • Develop short-term and long-term energy demand forecasts based on IT load growth and expansion plans., • Perform power capacity planning to maintain redundancy requirements., • Analyze energy consumption data using EPMS, BMS, and utility metering., • Track and report KPIs such as PUE, peak demand, and load factor., • Support energy budgeting and cost forecasting., • Coordinate with utility providers on capacity, upgrades, and outages., • Identify and drive energy efficiency initiatives., • Support compliance, sustainability reporting, and risk mitigation., • Collaborate cross-functionally to align energy strategy with operations., • Bachelor’s degree in Engineering, Energy Management, or related field., • 5 + years of experience in energy management or data center operations., • Strong understanding of data center electrical systems., • Experience with EPMS/BMS platforms and energy analytics., • Experience supporting multi-site or large-scale data center environments., • Knowledge of utility tariffs and demand response programs., • Familiarity with sustainability and renewable energy programs., • CEM or similar professional certification., • Analytical and data-driven mindset, • Strong communication and stakeholder management, • Risk-aware and detail-oriented, • Ability to translate technical data into executive insights $120,000 - $150,000 a yearServerfarm is committed to providing an equal opportunity workplace and offers paid time off, paid holidays, 401k and FULL coverage medical, dental and vision. Our compensation philosophy rewards employees for achieving the values and objectives aligned with the company’s goals and strategic initiatives. The listed salary range for this position is an estimate based on the competitive job market. Final compensation will be based on your own individual skills, experience, and location. The above statements are intended to describe the general nature and level of work being performed in this role. They are not intended to serve as an exhaustive list of all possible responsibilities and duties. We encourage you to apply even if your experience isn't an exact match to the job description. The listed salary range for this position is an estimate based on the competitive job market. Final compensation will be based on your own individual skills, experience, and location. The above statements are intended to describe the general nature and level of work being performed in this role. They are not intended to serve as an exhaustive list of all possible responsibilities and duties. We encourage you to apply even if your experience isn't an exact match to the job description.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. This is a Design Engineering role and NOT a Data Engineering role. Join our Industrial team, where innovation is cultivated in an environment of excellence within the industrial sector! Our flexible work environment serves as a professional collaborative atmosphere for engineers and designers that value our employees while embracing multiple “Best Places to Work” awards. As industrial facility professionals, we set trends, navigate diverse challenges, and reward ambitious employees. Experience the excitement of contributing to cutting-edge projects that serve some of the world’s largest technology companies with data center control system designs. With a commitment to a flexible yet disciplined work culture, our close-knit camaraderie continually provides our community of accomplished professionals the keys to a successful career! As a BMS/Control Systems Design Engineer you will be joining a fun, growing, team of other Electrical and Control System Engineers, Control System Integration Engineers, and Technicians. Your primary role will be designing instrumentation and control systems for DataCenters. Projects range from high level conceptual designs, detailed site designs and retrofits, factory witness testing of equipment, and construction administration and verification. This role will communicate and coordinate with other engineering disciplines, teams, subconsultants, clients, vendors, and contractors to learn, implement, and verify Data Center Building Management Systems are designed and constructed properly. You will be responsible for managing your tasks including the Building Management System (BMS) design, specifications, and drawings. This position may require occasional travel to project sites for meetings, information collection, and construction administration. Additional duties will include: • Selection and specification of process instrumentation., • Selection and specification of Programmable Logic Controllers (PLCs) and Human Machine Interface (HMI) equipment., • Selection and specification of networking components and media including copper, fiber, and wireless hardware., • Development of control system (BMS) sequences of operations., • Submittal review and field inspections., • Task Management We have multiple current openings and will consider candidates located out of our Lincoln - NE, Omaha - NE, Springfield - MO, Kansas City - MO, Tulsa - OK, Denver - CO, Loveland - CO, Dallas/Fort Worth - TX office locations or working remotely. You are passionate about: • Working collaboratively with others, • Having ownership in the work you do, • Using your talents to positively affect communities You bring to the team: • Strong communication skills., • Ability to contribute and work well on a team., • 5+ years of experience., • Attention to and passion for detail., • Professional engineering license preferred but not required., • Bachelor's Degree in Electrical Engineering, Mechanical Engineering, or related field preferred but not required. Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we’re here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you’ll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you’ll: • Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP), • Engage in work that has a positive impact in communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance, • Have the possibility for flexible work arrangements Olsson is an EEO employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status.

About the Company Armada is a full-stack edge infrastructure company delivering compute, connectivity, and sovereign AI/ML to some of the world’s most remote places. Named one of Fast Company's Most Innovative Companies, Armada’s solutions are deployed in over 60 countries globally for organizations ranging from energy to defense. With over $200 million in funding, Armada is backed by top investors such as Microsoft (M12), Founders Fund, and has strategic partnerships including Starlink, Skydio, and NVIDIA. We are looking for the most brilliant minds in the world to join us. Working at Armada means taking ownership, driving autonomy, and delivering impact. You’ll tackle challenges that haven’t been solved before and help build something transformative from the ground up. What you do here will not only define your career but help further Armada’s mission to bridge the digital divide for customers around the world. About the role Armada builds and deploys ruggedized, modular, containerized data centers that bring high-density AI compute to locations where traditional data centers cannot go. We are scaling production across multiple international markets, with deployments ranging from multi-megawatt GPU clusters to large-scale multi-unit campuses at up to 400 kW/rack. Armada needs an Electrical Design Engineer to work directly under the Senior Electrical Design Engineer on the power and integration team. This is a hands-on design role: you will own the electrical design for modular units from single-line through commissioning, review vendor submittals, and directly support manufacturing partners and deployment teams across multiple time zones. You will not be writing specs from an ivory tower — you will be on calls with manufacturers early in the morning, reviewing arc flash studies at noon, and answering field questions from a commissioning crew in the evening. This role is for someone who wants to ship hardware, not produce reports. Location. This role is remote. What You'll Do (Key Responsibilities) • Develop and maintain electrical designs for modular containerized data centers: single-line diagrams, load calculations, panel schedules, grounding, cable sizing, and raceway layouts across multiple low-voltage distribution standards (480 V and other international LV systems)., • Run protective device coordination, arc flash, and short-circuit studies in SKM, ETAP, or equivalent. Produce labels and coordination reports that will be used in the field., • Review and redline vendor submittals for UPS systems, battery systems, cooling distribution units, switchgear, main distribution boards, PDUs, and generator/ATS packages. Hold vendors accountable to the spec; flag discrepancies early., • Support manufacturing partners: answer RFIs, resolve conflicts on layout and piping/cable routing, and participate in factory witness testing., • Contribute to multi-jurisdictional compliance across a range of international electrical, fire, and mission-critical facility codes, and coordinate with local Authorities Having Jurisdiction., • Produce clear engineering documentation: Statements of Requirements, design basis memos, block diagrams, and commissioning procedures. If you hate writing, this is not the job., • Work alongside mechanical, controls, structural, and fire protection engineers — and with external consultants. You will be expected to push back when something is wrong, regardless of seniority., • Support field commissioning and troubleshooting, including occasional international travel to manufacturing partner sites, deployments, and trade events. Required Qualifications • Bachelor's degree in Electrical Engineering from an accredited program., • 3–7 years of post-degree experience in electrical design, with at least 2 years in data centers, mission-critical facilities, industrial power, or equivalent complex power distribution., • Demonstrated working knowledge of the NEC (NFPA 70) and, ideally, one or more IEC-based national codes. Multi-jurisdictional design experience is a strong plus., • Hands-on experience with protection coordination and arc flash software (SKM PowerTools, ETAP, EasyPower, or similar)., • Proficiency with AutoCAD Electrical and/or Revit MEP, plus Bluebeam Revu (or equivalent) for submittal markup., • Familiarity with UPS systems (double-conversion topology, battery sizing, parallel operation), medium- and low-voltage switchgear, transformers, and generator/ATS integration., • Ability to read mechanical and structural drawings well enough to catch interdisciplinary conflicts before they hit manufacturing., • Clear written communication. You will be writing RFI responses, submittal reviews, and technical memos read by vendors and executives. Preferred Experience and Skills • PE or EIT licensure is a plus; neither is required., • Experience with containerized or modular/prefabricated data center products., • Knowledge of high-density liquid-cooled GPU systems and their electrical implications — inrush, harmonics, rack-level power distribution, busway., • Working familiarity with battery chemistries beyond VRLA and lithium-ion, and with UL 9540A or equivalent large-scale battery testing requirements., • Familiarity with NFPA 70E, NFPA 75/76, NFPA 110, and NFPA 855 as they apply to mission-critical and energy storage installations., • Experience coordinating with multiple AHJs and international insurance bodies on mission-critical approvals., • Exposure to BMS/DCIM integration, BACnet/Modbus, and the electrical side of controls handoffs., • Experience working with external manufacturing partners and consultants across multiple time zones. Compensation For U.S. Based candidates: To ensure fairness and transparency, the starting base salary range for this role for candidates in the U.S. are listed below, varying based on location experience, skills, and qualifications. In addition to base salary, this role will also be offered equity and subsidized benefits (details available upon request). Benefits • Competitive base salary and equity, • Medical, dental, and vision (subsidized cost), • Health savings accounts (HSA), flexible spending accounts (FSA), and dependent care FSAs (DCFSA), • Retirement plan options, including 401(k) and Roth 401(k), • Unlimited paid time off (PTO), • 14 paid company holidays per year #LI-AB1 #LI-Remote Compensation $113,760 - $142,200 USD You're a Great Fit if You're • A go-getter with a growth mindset. You're intellectually curious, have strong business acumen, and actively seek opportunities to build relevant skills and knowledge, • A detail-oriented problem-solver. You can independently gather information, solve problems efficiently, and deliver results with a "get-it-done" attitude, • Thrive in a fast-paced environment. You're energized by an entrepreneurial spirit, capable of working quickly, and excited to contribute to a growing company, • A collaborative team player. You focus on business success and are motivated by team accomplishment vs personal agenda, • Highly organized and results-driven. Strong prioritization skills and a dedicated work ethic are essential for you Equal Opportunity Statement At Armada, we are committed to fostering a work environment where everyone is given equal opportunities to thrive. As an equal opportunity employer, we strictly prohibit discrimination or harassment based on race, color, gender, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other characteristic protected by law. This policy applies to all employment decisions, including hiring, promotions, and compensation. Our hiring is guided by qualifications, merit, and the business needs at the time. Unsolicited Resumes and Candidates Armada does not accept unsolicited resumes or candidate submissions from external agencies or recruiters. All candidates must apply directly through our careers page. Any resumes submitted by agencies without a prior signed agreement will be considered unsolicited and Armada will not be obligated to pay any fees.

Flock Safety is an all-in-one technology solution to eliminate crime and keep communities safe. Our intelligent platform combines the power of communities at scale - including cities, businesses, schools, and law enforcement agencies - to shape a safer future together. Our full-service, maintenance-free technology solution is trusted by communities across the country to help solve and deter crime in the pursuit of safer communities for everyone. Our holistic public safety platform is comprehensive and intelligent, providing the actionable evidence needed to solve, deter and reduce crime across neighborhoods, schools, businesses and entire cities. Without compromising transparency or privacy, we are turning unbiased data into objective answers. Flock strives to offer a career-defining experience where you can also make an impact on your community. While safety is a serious business, we are a supportive team that is optimizing the remote experience to create strong and fulfilling relationships even when we are physically apart. Our group of hard-working employees thrive in a positive and inclusive environment, where a bias towards action is rewarded. We have raised over $500M in venture capital from investors including Tiger Global, Andreessen Horowitz, Matrix Partners, Meritech Capital Partners, and Initialized Capital. Now surpassing a $5.5B valuation, Flock is scaling intentionally and seeking the best and brightest to help us meet our goal of reducing crime in the United States by 25% in the next three years. Flock thrives on owning the complete product development lifecycle. As our energy solutions evolve, we're seeking a lead Subject Matter Expert (SME) in energy harvesting and storage to lead the development and implementation of robust, cutting-edge solutions. This role will champion a continuous improvement approach, fully owning innovation and expansion in this critical area. Expert level understanding of lithium ion and derivative chemistry tech Expert BMS designer (battery mgmt system) for packs ranging from 50Wh to 1KWh and 1S to 12S configurations Expert knowledge of fuel gauge design and architecture Advanced knowledge of lithium ion primary and secondary protection schemes Expert knowledge of lithium ion charger architectures Demonstrated success with shipping industrial grade lithium ion battery packs and associated chargers at volume Deep understanding of current high density battery chemistry landscape and associated vendors Proven track record working with tier one battery pack vendors and cell suppliers Exposure to Energy harvesting technologies (inc but not limited to solar power) Direct experience with solar energy harvesting tech including photo voltaics Ownership and continuous improvement of flock’s expertise in all energy storage technologies Feeling uneasy that you haven’t ticked every box? That’s okay; we’ve felt that way too. Studies have shown women and minorities are less likely to apply unless they meet all qualifications. We encourage you to break the status quo and apply to roles that would make you excited to come to work every day. We are a results-oriented culture and believe job descriptions are a thing of the past. We prescribe to 90 day plans and believe that good days lead to good weeks, which lead to good months. This serves as a preview of the 90 day plan you will receive if you were to be hired in this role at Flock Safety. The First 30 Days Deep dive of current shipping product battery architectures Familiarize with active development projects as pack design subject matter expert The First 60 Days Inherit pre-existing relationships with flock battery pack vendors Contribute to active development of battery pack design efforts 90 Days & Beyond Own flock battery development process and pack performance requirement for current and future flock products Pioneer the architecture of flocks end to end energy harvesting solutions We want our interview process to be a true reflection of our culture: transparent and collaborative. Throughout the interview process, your recruiter will guide you through the next steps and ensure you feel prepared every step of the way. Our First Chat: During this first conversation, you’ll meet with a recruiter to chat through your background, what you could bring to Flock, what you are looking for in your next role, and who we are. The Hiring Manager Interview: You will meet with your potential future boss to really dive into the role, the team, expectations, and what success means at Flock. This is your chance to really nerd out with someone in your field. The Technical Assessment: Our technical assessments seek to test the hard skills required to do the job. Engineers may find themselves in coding interviews or architecture discussions, sales roles may present mock discovery calls, and leadership roles may craft 90 day plans. Your recruiter will inform you of which assessment you will be assigned and ensure you are fully prepared for your big day. The Panel: Learn more about the team, responsibilities, and workflows. You should be prepared to speak about past projects, how you collaborate and communicate with others, and how you live our values. Depending on the team and role you are interviewing for, you may meet with several teammates as well as cross-functional partners. The Executive Review: A chance to meet an executive and view Flock from a different lens. Be prepared to ask well-thought-out questions about the company, culture, and more. In this role, you’ll receive a starting salary between $141,200-$194,150 as well as Flock Safety Stock Options. 🌴Flexible PTO: We seriously mean it, plus 11 company holidays. ⚕️Fully-paid _ plan for employees: including Medical, Dental, and Vision and an HSA match. 👪Family Leave: All employees receive 12 weeks of 100% paid parental leave. Birthing parents are eligible for an additional 6-8 weeks of physical recovery time. 🍼Fertility & Family Benefits: We have partnered with _, a complete digital health benefit for starting and raising a family. In 2025, Flock will provide a $ 50,000-lifetime maximum benefit related to eligible adoption, surrogacy, or fertility expenses. 💖Caregiver Support: We have partnered with _ to provide our employees with caregiver support 💸Carta Tax Advisor: Employees receive 1:1 sessions with Equity Tax Advisors who can address individual grants, model tax scenarios, and answer general questions. 💚ERGs: We want all employees to thrive and feel like they belong at Flock. We offer three ERGs today - Women of Flock, Flock Proud, and Melanin Motion. If you are interested in talking to a representative from one of these, please let your recruiter know. 💻WFH Stipend: $150 per month to cover the costs of working from home. 📚Productivity Stipend: $250 per year to use on Audible, Calm, Masterclass, Duolingo, Grammarly and so much more. 🏠Home Office Stipend: A one-time $750 to help you create your dream office. 🐾Pet Insurance: We’ve partnered with _ to provide insurance for our employee’s fur babies. Flock is an equal opportunity employer. We celebrate diverse backgrounds and thoughts and welcome everyone to apply for employment with us. We are committed to fostering an environment that is inclusive, transparent, and collaborative. Mutual respect is central to how Flock operates, and we believe the best solutions come from diverse perspectives, experiences, and skills. We embrace our differences and know that we are stronger working together. If you need assistance or an accommodation due to a disability, please email us at careers@flocksafety.com. This information will be treated as confidential and used only to determine an appropriate accommodation for the interview process. At Flock Safety, we compensate our employees fairly for their work. Base salary is determined by job-related experience, education/training, as well as market indicators. The range above is representative of base salary only and does not include equity, sales bonus plans (when applicable) and benefits. This range may be modified in the future. This job posting may span more than one career level.

Serverfarm is a leading developer and operator of data centers with over 750+ locations and key customer relationships in 45 countries. We're revolutionizing how data centers operate across North America, Western Europe, and Israel, serving the world's leading technology and hyperscale companies. With Manulife Investment Management's acquisition in 2023 and our award-winning InCommand platform we're positioned for explosive growth as AI adoption and cloud migration drive unprecedented demand for data center capacity. A career at Serverfarm means being at the forefront of digital infrastructure innovation, where your work directly impacts how the world's data is managed and secured. As we target 4x growth over the next four years, you'll have unprecedented opportunities to take on new challenges, develop cutting-edge skills, and grow your career across our expanding global operations. Join our team of innovators and help shape the future of sustainable data centers while building a career without boundaries. The Sr. Controls Deployment Engineer will own and lead the deployment, integration and commissioning of data center building automation controls systems, such as Building Management Systems (BMS), Electrical Power Monitoring Systems (EPMS), and custom customer monitoring solutions.This role will drive quality by (1) recommending and enforcing controls and monitoring standards in new and existing data center projects; (2) manage 3rd-party vendors to ensure timely delivery of data center automated controls that meets ServerFarms technical and business requirements; (3) partner with construction, commissioning, operations and field engineering to finalize and implement Controls Normalization Plans ServerFarm’s data center fleet.This role is pivotal in enhancing ServerFarm’s competitive edge through delivery of cutting-edge technology solutions that are aligned for Operations and business requirements and future growth. • Leads deployment of data center control systems, on time, with effective management of vendors during construction and L1-L5 commissioning phases of projects to ensure minimal defects at the point of Power and Facilities Hand-Off (PFHO). Documents the final validation of controls and monitoring systems’ performance, ensuring all criteria are met, verified as complete, accurate and ready for handover to operations and customers., • Have deep knowledge of critical infrastructure, building operations, mechanical plant strategies, BMS/EPMS programming concepts, control diagrams, industrial HVAC, electrical line-ups, one-line diagrams, and complex environmental and electrical concepts., • Develop plans for and provide over-sight of point-to-point verification, software and graphics testingto validate operability, compatibility and quality prior to fielding on-site., • Provide QA/QC oversight of hardware installation, reviewing proposals and programming through the commissioning process, • Support commissioning testing to validate controls and monitoring settings, integration and operability of controls equipment with the overall constructed data center infrastructure systems., • Ensures quality of systems performance and workmanship by support provided to partner teams, providing diagnosis and resolution of Loss of Visibility (LOV), Loss of Resilience (LOR), Large Scale Event (LSE), Critical Scale Event (CSE), and other operations impacting events within predefined Service Level Agreements (SLAs)., • Recommends improvements for delivery of further initiatives to improve the efficiency of ServerFarm data center controls and monitoring systems and/or operational procedures., • Bachelor’s degree in mechanical, electrical or closely aligned engineering discipline, or commensurate industry experience or military experience in lieu of degree may be acceptable., • 5+ years of experience in controls engineering, including programming development, start-up, and commissioning of critical systems., • Control system integration: experience building unified automated control system for enterprise level clients, consolidating equipment and subsystems; hardware, software, networking products from multiple vendors., • Control theory: experience with proportional-integral-derivative (PID) controllers., • Industry standard programming: Experience with PLC or SCADA programming, and scripted programming languages, • Engineering documentation: ability to understand electrical diagrams, control diagrams, control networks schematics, control panel Bill of Materials (BOM), or control panel schematics$140,000 - $170,000 a yearThe listed salary range for this position is an estimate based on the competitive job market. Final compensation will be based on your own individual skills, experience, and location. The above statements are intended to describe the general nature and level of work being performed in this role. They are not intended to serve as an exhaustive list of all possible responsibilities and duties. We encourage you to apply even if your experience isn't an exact match to the job description.

Who is T.E.A.M. Solutions? Established in 2001, T.E.A.M. Solutions is a rapidly growing company providing energy management and building automation solutions. We provide design, installation and support services to industry-leading clientele in fields such as Healthcare, Education, Manufacturing, Oil and Gas, and Large chain retailers to name a few. Position: Full-time salaried, with benefits Location: Austin, College Station, DFW, Houston, San Antonio, Waco Role Summary: The Senior Support Specialist serves as the primary point of contact for all incoming customer support calls related to remote support. This role triages issues, performs remote diagnostics, resolves software/controls problems when possible, and dispatches field technicians for on-site service when necessary. The specialist acts as the subject matter expert (SME) for Tridium/Niagara (AX/N4/N5) and supports the successful implementation and adoption of the Lynxspring product line (e.g., JENEsys, Edge, Helix/Envision). The ideal candidate combines strong technical acumen with exceptional customer service and clear communication. Key Roles & Responsibilities: • Frontline Support & Triage, • Document all customer support calls/emails/chats; gather symptoms, environment details, and impact., • Assess severity, safety risks, and business impact; prioritize per SLA and escalate when appropriate., • Provide clear, empathic guidance and set expectations for resolution and next steps., • Remote Diagnostics & Resolution, • Connect to systems securely (VPN/remote tools) and diagnose BMS issues across Delta and Tridium/Niagara AX/N4/N5 platforms., • Troubleshoot points, alarms, graphics, schedules, logic blocks, licensing, and database connectivity., • Identify communication issues (BACnet, Modbus, LON, MQTT), controller health, field bus integrity, and network/IP constraints., • Perform configuration corrections, small logic fixes, point mapping, tag standardization, and alarm strategy tuning., • Verify system restores/backups, start/stop behavior, certs, schedules, and platform health., • Dispatch & Field Coordination, • Determine when on-site service is required; create detailed work orders with reproducible steps, logs, and recommended diagnostics., • Coordinate technician scheduling, parts needs, site access., • Provide remote support to field techs during service calls; capture learnings for future prevention., • Tridium/Niagara Enablement, • Serve as the internal go-to for Niagara frameworks (AX/N4/N5), architecture, licensing, drivers, and best practices., • Lead/assist Lynxspring rollout: standards, templates, device commissioning, and documentation., • Develop integration patterns (e.g., BACnet device discovery, Modbus register maps, tag dictionaries, Niagara hierarchies)., • Mentor team members; create playbooks, KB articles, and training modules., • Customer Success & Continuous Improvement, • Own complex customer issues end-to-end; drive to resolution with transparent updates., • Recommend system optimizations (graphics usability, alarm rationalization, schedules, energy strategies)., • Capture root cause analyses and preventive actions; feed improvements into templates and SOPs., • Contribute to product feedback loops with engineering/vendors (Tridium, Lynxspring) for defect reporting and feature requests., • Analytics Qualifications: • 5+ years BAS experience, • Strong verbal communication and phone etiquette, • Ability to multitask and manage multiple service requests in a fast-paced environment, • Excellent organizational and time-management skills, • Strong attention to detail and efficiency troubleshooting BAS systems, • Customer service–oriented mindset with problem-solving abilities, • Comfortable using scheduling, dispatch, and work order software systems, • Proficient in basic computer applications (email, spreadsheets, job tracking systems), • BACnet & Tridium experience preferred Personal/Character: T.E.A.M. is looking for individuals who are hardworking, honest, driven, detail-oriented with an excellent attitude! Employee Benefits Package T.E.A.M. Solutions prioritizes the well-being of its employees by offering comprehensive benefits, including 100% coverage of Medical and Dental Insurance for employees. Additionally, we provide paid holidays, vacation time, a 401k Plan, Flexible Spending Accounts, Life Insurance, and Short-Term Disability Insurance.

Low Voltage BMS Technicians play a crucial role in maintaining and troubleshooting building management systems within commercial building projects. Troubleshoot low voltage building management systems.

Description: Lead OB/GYN Physician Schedule: Part-time (24.5 hours per week) --- Lead the Future of Women's Health in Brooklyn Join BMS Family Health and Wellness Centers as our Lead OB/GYN Physician BMS Family Health and Wellness Centers is seeking an experienced and mission-driven Lead OB/GYN Physician to oversee and grow our Women's Health services. This is an exciting opportunity to lead a dedicated team while delivering exceptional, compassionate OB/GYN care to the vibrant communities of East and Central Brooklyn. As the Lead OB/GYN, you will balance direct clinical care with strategic leadership. You will be instrumental in advancing quality initiatives, mentoring clinical staff, and shaping the delivery of services that reflect our mission to provide high-quality, culturally responsive healthcare for all. --- Key Responsibilities · Provide full-spectrum OB/GYN care, including prenatal and postnatal care, gynecological exams, family planning, and reproductive health services · Perform outpatient procedures and coordinate care for patients requiring advanced services or hospital-based deliveries · Ensure thorough, accurate documentation in the electronic health record (EHR) · Collaborate with multidisciplinary care teams to support holistic, patient-centered care · Participate in the on-call rotation as needed · Provide clinical leadership and supervision for OB/GYN providers and women's health staff · Develop and implement evidence-based protocols and best practices for Women's Health services · Lead quality improvement efforts and monitor departmental performance metrics · Participate in regulatory compliance activities and internal audits · Support recruitment, onboarding, and professional development of clinical team members · Represent the department in leadership meetings and strategic planning initiatives · Contribute to the development of community outreach and patient education efforts · Align department goals with BMS's broader mission, vision, and strategic priorities --- Requirements: Qualifications · MD or DO degree from an accredited institution · Board Certified in Obstetrics and Gynecology · Current or eligible NY State medical license · Minimum 10 years of OB/GYN clinical experience required · Requires 3 years of experience leading clinical operations/administration at department level and managing a team · Experience in community health or working with underserved populations is a plus · Strong communication, organizational, and team leadership skills · Passion for health equity and BMS's mission of Total Health and Wellness Salary Range $195,000 - $205,000 Compensation details: 195000-205000 Yearly Salary PI478dc669f7cb-26276-38140525

Building Technologies Integrator Business.The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects.Bosch started its Inte

BMS, BAS, DDC, building management, EPMS and energy management systems ranging from the latest Internet-based open-architecture technologies to complex process systems. Control Solutions Group, an EMCOR Group company, is seeking a highly motivated BMS Service Sales Executive to join our team and dri

BMS Industries Private Limited (Technocraftgroup) is seeking a Hot Forging Production Supervisor to oversee production in the press shop area. The ideal candidate will manage material handling, conduct production planning, and implement efficiency improvements.

Olsson, a growing company in the United States, is seeking a BMS/Control Systems Design Engineer to design instrumentation and control systems for Data Centers.Responsibilities include managing the BMS design and coordinating with engineering teams.Candidates should have 6+ years of experience and s

Controls Design Engineer – BMS As a Controls Design Engineer – BMS , you will be joining a growing team of Electrical and Control System Engineers, Control System Integration Engineers, and Technicians. Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related field prefe

Job DescriptionFST Technical Services Commissioning (Cx) division is one of the leading Cx firms in the country. We partner with clients for quality assurance in the design, construction, and post-acceptance phases of building projects. We ensure that equipment in mechanical, electrical, plumbing, and associated systems are designed, installed, and functionally tested to meet the clients requirements and design intent. For this position of Commissioning Field Engineer II on offer includes an excellent salary and benefits package. About the Job: A Field Engineer II reports directly to his or her Team Leader and to the team’s Project Engineers, and is directly responsible for the execution of field and office assignments as directed. Essential Functions Field Engineer must have general knowledge of the following topics: Refrigeration, HVAC, Steam management and distribution systems, pumps, fans, motors, chillers, boilers, air ventilation balancing systems, BMS systems and VAV. Field Engineer holds the following responsibilities: • Site Inspections and reports., • Equipment Testing., • Submittal Review and preparation of comments, • Document and Specification reviews and updates, • Create and execute commissioning checklists for the respective equipment and systems as directed by the team leader, • Collection and tabulation of field data using FST testing equipment, • Preparation and writing of reports., • Proper use of FST test equipment including maintenance, cleaning and reporting damages to their respective Team Leader, • Assist in executing performance test requirements., • Individual Time and Expense management., • Any special projects as requiredRequirements:, • Bachelor’s Degree in Mechanical/ Electrical Engineering, minimum 1-3 years of experience., • Must be a self-starter and capable of working independently or in a team environment., • Must possess a strong desire to learn and participate in the company developmental training program, • Trade Professional affiliation, a plus., • Proficiency with Microsoft products (Word, Excel, Power Point, etc.)Technical writing skills a plus, • Strong ability to work in changing environment and adapt to varying working environments., • Must be able to lift at least 30 pounds and climbing ladders Pay range $75,000-$90,000 based on experience. FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR MetI6mc3dh

Bristol Myers Squibb is seeking a Senior Therapeutic Area Specialist for Hematology to drive demand for BMS medicines in Brooklyn, Queens, and Staten Island.This role focuses on building strong relationships with healthcare providers, ensuring the effective use of BMS products while achieving perfor

The TAS will drive demand for BMS medicines by engaging healthcare providers with scientific dialogue and maintaining scientific expertise.

This role involves managing all aspects of studio production, including overseeing a team of content creators to ensure high-quality visual content that aligns with the BMS brand identity. The ideal candidate will have 8-10 years of experience in studio production and strong leadership skills to dri

A leading biopharma company is seeking a Senior Therapeutic Area Specialist for the Cardiovascular Community in Louisville, KY.This field-based role focuses on engaging healthcare providers to drive demand for BMS medicines and build strong professional relationships.Candidates should have an advanc

Job Description Controls Engineer - Data Centers - NYC or Remote Our client is a Leading Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the execution of design of Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), BMS System (Building Monitor Systems), DCIM, SCADA in a data center or industrial environment. This candidate will design customized controls solutions for customers in the data center industry for both new design and upgrades to existing automation systems for power and cooling systems in a live, mission-critical environment. They will collaborate with the Electrical and Mechanical Engineering / Design teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions. Applies an intensive and diversified knowledge of experience in machine control / BMS/BAS/EPMS/DCIM/SCADA systems design, implementation, testing and operations. Responsibilities: • Execute automation design of complex scope, and coordinate activities of other personnel as needed, • Meet with business to understand needs of the customer to design a customized solution to meet their needs, • Equipment selection and write supporting reports, • Create standards for ground up design as found in initial discovery process, • Lead design for control panels: layout, control power, relay logic, and wiring diagrams, • Create and review project specifications and sequence of operations of MEP equipment, • Create Bill of materials (BOMs): instrumentation, sensors, actuators, valves and other field devices, • Mentor engineers and assist with training and development on software standards to create a learning and growing environment, • Design and implement Front end SCADA (Supervisory Control and Data Acquisition) Platforms, DDC and PLC - controller based systems for various projects, • Lead the design of BAS controls and EPMS, • Develop and improve design configuration, programming, networking, systems architecture, diagnostic standards including IT / OT requirements and interface to match application needs, • Review / Submit project deliverables per project requirements: AE design drawings, shop drawings, product data, o/m manuals (SOPs and MOPs), etc., • Lead development of UI / UX configuration standards, • Develop proposals and timely completion of Assigned Tasks and Deliverables including project scope, schedule and budget, • Effective time management of project design team including forecasting resources and resource coordination, • Identify potential project scope changes; aid in development of strategies to minimize impact and changes from estimated costs and project deadlines, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc., • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs and commissioning agents on project progress, • Assist / Develop all project communication and reporting, weekly progress reports, etc., • Work with Customer to ensure safe and secure systems to meet best practices Qualifications: • BA / BS in Mechanical or Electrical Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Engineering experience with industry standards with Automation and Controls Experience relevant to the data center industry, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 4-7+ years with BMS / BCM / BAS Systems / SCADA / DCIM - Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (air-cooled / water cooled chillers, cooling distribution units, cooling towers, adiabatic coolers, Air Handlers, CRAC / CRAH units, liquid cooling systems, containment solutions, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings, equipment submittals, and facility layouts, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications, • Minimal travel Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: 6zf9ngau5jwu9fou1armpxhoze@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Your role The Site Engineer II position is a contributing member to the site level Data Center Operations team assigned to one or more of our data center properties reporting directly to the Manager Engineering Operations. The Site Engineer II will have experience in mission critical infrastructure, including Generators, UPS Systems, HVAC Systems, Fire/Life Safety Systems, BMS Systems, and CMMS systems. It is expected that the Site Engineer I candidate has expertise in either electrical work or mechanical work and it would be expected that he/she would be competent in the area of non expertise. The responsibilities of the Site Engineer II are: to contribute to the daily site operation, including creation and modification of site operating procedures, contribute to creation of change management tickets, creation of timely incident reporting, site maintenance and repairs/inspections to help ensure Digital Realty’s data center operations achieve the highest level of availability. What you’ll do • Gain a complete understanding of the following DLR and site related items:, • Facility layout and operation of MEP systems and the ability to illustrate site specific system one-lines with good accuracy., • Equipment nomenclature standards and equipment locations, • Facility drawings and equipment specifications, • Equipment sequence of operations (SOO’s), standard operating procedures (SOP’s), and emergency operating procedures (EOP’s)., • Customer SLA’s and engineering specific lease obligations critical to data center operations., • Facility top 20 EOP’s., • BMS alarm functionality, alarm escalation/acknowledgement, and ability to extract data and trends, • DLR event management, event escalation, and incident reporting procedures, • Computerized Maintenance Management System (CMMS), including the ability to create, edit, implement, and close change management work orders., • Create/edit/resolve/close incident reports following a site incident, • Maintenance and Operations Standards, • Digital Realty’s Environmental and Occupational Health and Safety standards, • Gain a complete understanding of all aspects of data center operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 data center operation to achieve 100% uptime and 100% compliance with all customer SLAs., • Supervision of construction activity and installations as required., • Ability to be the executor in the site specific change management processes including the creation of Method of Procedures (MOPs) for low risk preventative maintenance and repairs as well as the oversight of those maintenances as they are carried out., • Ability to effectively troubleshoot site mechanical and electrical systems., • Ability to respond to unplanned events without immediate supervision., • Ability to efficiently complete rounds/inspections and to detect anomalies during those rounds., • Develop or improve SOPs for site specific equipment., • Gain a good understanding and knowledge of the local customers business and datacenter operation., • Support various accreditation initiatives, including, but not limited to, SSAE16, SOC2, ISO 27001, etc. as may be required by Digital Realty., • Complete DLR Critical Awareness Training What you’ll need • At least 3 year of experience in mission critical facilities operating / engineering or equivalent equipment experience including assets associated with mission critical engineering relevant to the specific site. (UPS, HVAC, generators, fire/life safety systems)., • Hands-on electrical or mechanical skill and competence in the area of non-expertise (for example, electrical expertise with mechanical competence, or vice-versa)., • Strong knowledge of various UPS Systems and architectures., • Strong knowledge of various cooling systems and architectures., • Strong understanding of infrastructure redundancy configurations and equipment and their risks (N+1, 2N, ATS/ STS, Failover Scenarios), • Strong knowledge of energy efficiency principals., • Strong interpersonal, presentation and communication skills. Ability to respond effectively, verbally in writing to sensitive issues, complex inquiries or complaints., • Detail Oriented with strong organizational skills, • Proficiency in Microsoft Word, Excel and Outlook and familiarity with Microsoft Project, Adobe Acrobat, Visio or AutoCad, • Basic understanding of emergency situations and escalation processes., • Strong understanding of Computerized Maintenance Management Systems (CMMS), Data Center Infrastructure Management (DCIM), and power metering systems, • Lift and handle up to 50 pounds, • Bend, stoop, and stretch as required for placement and retrieval of network devices, materials, or equipment, • Work under a raised data center floor, • Climb ladders (up to 16 feet) to reach plenum spaces Company DescriptionPenguin has been serving the New York metropolitan area for more than 60 years with professional and competitive commercial electrical services and facility maintenance services.Penguin has been serving the New York metropolitan area for more than 60 years with professional and competitive commercial electrical services and facility maintenance services.

Job Description Sr Mechanical Controls Engineer - Remote Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • Assist / Develop all project communication and reporting, weekly progress reports, etc. Qualifications: • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5 -10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications, • Travel: 5-10% / Minimal travel if located near NYC or LA Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: xckuu35xghgoko4o6x6c36m58w@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

A leading engineering firm in the United States is seeking a Controls Design Engineer – BMS to join their growing team.The role requires 6+ years of experience in designing BMS and control systems.Responsibilities include leading instrumentation selection, managing design tasks, and acting as a te

Albireo Energy is seeking a National Account Executive to drive sales growth in Data Center Solutions.This position requires proven experience in large national account management, specialized knowledge of Data Center standards, and ability to lead complex solution sales cycles.Responsibilities incl

Job Description The Engineer is responsible for daily maintenance of all building controls (BMS), HVAC troubleshooting and light maintenance, light MEP as well as exhibition lighting in the galleries as needed. Responsibilities includes the same at all Whitney locations including Bulwark and ISP. This position is governed by a collective bargaining agreement between the Museum and the AFL-CIO International Union of Operating Engineers Local 30 and 30A. Responsibilities: • Oversees all facilities /engineering needs at assigned facilities, • Provides weekly updates including recommendations for HVAC and MEP improvement and communicates with Facilities Management staff, site manager, Service Contractors, Art Handling staff and Exhibition Managers and other departments during frequently planned meeting to ensure that conservation standards HVAC standards, life safety, and aesthetic lighting requirements are met., • Accompany maintenance crews on each service visit to ensure that efficiency, consistency, and climate controls are met., • Maintains a well-organized inventory of tools, equipment and supplies needed for building maintenance., • Coordinates with Engineering Manager and/or Director of Engineering to obtain all necessary equipment and purchases (including spear part to meet service needs., • Coordinates PM work with other departments and consistently provide a clean and safe work environment., • Become familiar with building operation including; shut-off valves, fire alarm/Vesda system, boiler system, HVAC units and overall building performance. Performs other duties assigned by the Engineering Manager and/or Director of Engineering., • When not performing these duties at the primary assigned building, this position will be eligible for overtime at all Whitney locations and will adhere to the engineer’s regular duties and responsibilities per Local-30 contract and as assigned. Requirements: • Knowledge of HVAC and MEP, • Q-99 Refrigerating System Operating Engineer license, • Professional experience as an operations Engineer, • Basic electrical and wiring skills, ability to diagnose issues and follow building code, • Ability to operate lifts required to perform tasks, • Knowledge of hazards and safety precautions of the work, • Excellent interpersonal skills and communication skills, • Engineer must be personally vigilant and as the ability to oversee the work of others at all Whitney locations/spaces, ensuring that surfaces are protected and that art is never in danger. Compensation and Benefits: • Hourly rate of $54.67, • Medical, Dental, Vision, 403(B) elections, • Generous Paid Time off benefits, • Commuter benefits - parking and mass transit, • Admission to world-renowned museums across the city and nationally, • Pet insurance and discounted membership for Citibike, • This position is covered under Local 30 If you believe that you could excel in this role, we encourage you to apply. We are dedicated to considering a broad array of candidates. Whether you’re new to arts and culture administration, returning to work after a gap in employment, simply looking to transition, or take the next step in your career path, we will be glad to have you on our radar. Please use your cover letter to tell us about your interest in the arts and culture space and what you hope to bring to this role. About the Whitney: The Whitney Museum of American Art, founded in 1930 by the artist and philanthropist Gertrude Vanderbilt Whitney, houses the foremost collection of American art from the twentieth and twenty-first centuries. From her vision arose the Whitney Museum of American Art, which has been championing the most innovative art of the United States for 86 years. The core of the Whitney’s mission is to collect, preserve, interpret, and exhibit American art of our time and serve a wide variety of audiences in celebration of the complexity and diversity of art and culture in the United States. Through this mission and a steadfast commitment to artists themselves, the Whitney has long been a powerful force in support of modern and contemporary art and continues to help define what is innovative and influential in American art today. EEO Statement: The Whitney Museum of American Art is an Equal Opportunity Employer. The Museum does not discriminate because of age, sex, religion, race, color, creed, national origin, alienage or citizenship, disability, marital status, pregnancy, partnership status, caregiver status, veteran status, gender (including gender identity), sexual orientation, genetic information, predisposition, or carrier status, arrest or conviction record to the extent required by applicable law, credit history, domestic violence, sexual violence, or stalking victim status, or any other factor prohibited by law. The Museum hires and promotes individuals solely on the basis of their qualifications for the job to be filled. The Museum encourages all qualified candidates to apply for vacant positions at all levels. Powered by JazzHR gQlMRM6qjH

Job DescriptionThis is a senior-level Controls Technician role focused on delivering mission-critical BMS service projects across Central and Northern New Jersey. Unlike Tech II, Tech III candidates must operate independently at a high level: leading troubleshooting, programming, commissioning, and integration tasks in live data center environments. This role directly supports a key client with high uptime and compliance requirements. Required Skills • 5-12+ years hands-on experience in BMS, SCADA, PLCs, or HVAC controls (senior-level only)., • Independent troubleshooting + commissioning in live data centers (client-facing)., • Proficiency in Wonderware/Aveva, with priority order below, • Strong HVAC grounding (control sequences, integration), • Ability to interpret and apply mechanical drawings and control schematics, • Willingness to be at the client site 5-days a week; M-FPLEASE READ - You will not be considered for this role if:, • You only have InTouch HMI or MES experience (without System Platform/Historian/Dev Studio)., • You have no SCADA/PLC exposure., • You are unwilling to travel daily across NJ., • You have weak communication skills or lack of independent project ownership. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionOriginally founded in 1991 as Harlem RBI, DREAM has grown to annually serve more than 2,500 youth across East Harlem and the South Bronx through a network of seven PreK-12, extended-day, extended-year DREAM Charter Schools and community sports-based youth development programs. Through our commitment to rigorous academics, social-emotional learning, deep family and community engagement, and health and wellness, we create lifelong learners who are equipped to fulfill their vision of success in and out of the classroom. We dream big, as well, with an aggressive five-year plan to expand to serve 3,500 students across seven schools—growing our organization’s impact and leveling the playing field for all children. To learn more, visit wearedream.org. The Facilities Porter is a dynamic individual who can serve as a reliable team player and is willing to learn. The Facilities Porter ensures the ongoing functionality and aesthetic of DREAM facilities by supporting the maintenance of all DREAM campuses. Like all DREAM employees, the Facilities Porter should demonstrate a strong commitment to the mission and values of DREAM and should have substantial expertise in all areas of responsibility. The Facilities Porter report to the Senior Facilities Manager. Responsibilities Ensure the school, park, program spaces and office areas are kept clean and well maintained at all times; Perform outdoor maintenance, such as snow removal, salting and park maintenance; Responsible for room and event set up, as determined by staff needs and preferences; Utilize and maintain cleaning equipment, such as buffing machines and floor scrubbers; Assist with daily inspections of school building, park, offices and program spaces, checking for potential disruptions to daily operations, and addressing or reporting them accordingly; Assist with at-need maintenance and cleaning at multiple DREAM locations, and be familiar with maintenance schedules at all facilities; Receive and respond to facilities maintenance tickets; Assist with minor repairs, i.e. painting and patching, plumbing and carpentry repairs, if needed; Respond to building staff requests regarding building operations; prioritize schedules; and assign, plan, and monitor the work through online ticketing system; Help to maintain all required administrative records including, but not limited to, log books, work records, maintenance records, contractor visits, keys issued, etc; Assist in the regular inspection of all areas of the building and report deficiencies as well as suggestions for improvement; Provide excellent customer service to Harlem RBI and DREAM staff; Cultivate a learning and youth focused environment by responding quickly and efficiently to school and program related issues; Attend necessary school meetings to support maintenance management activities as they relate to the school’s schedule; Assist in the execution of a facilities management and preventive maintenance plans; Foster an atmosphere of teamwork among building staff, school staff, and contractors; Responds to requests in a courteous, timely, and highly effective manner; Supports with repairs, maintenance, and continuous operation of all building systems including: fire/life safety, Mechanical (HVAC, plumbing), Electrical (lighting control equipment, bulb replacement, UPS, light construction (painting, doors, locks), digital systems (fire alarm, card access, CCTV security access systems), elevator control, Building Maintenance System (BMS)(DDC), and audio-visual systems, etc. Qualifications High School diploma required or its equivalent A minimum of four years of experience in facilities, construction or maintenance Demonstrate a general knowledge, experience, and proficiency in several areas of maintenance (e.g., plumbing, painting, carpentry, masonry/concrete/tile, window glazing, electrical, mechanical, HVAC and boiler systems, roof repair, plastering/spackling, field/playground maintenance, and furniture repair) Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities Exhibit a personality that demonstrates interpersonal skills to relate well with students, staff, administration, parents and the community Demonstrate the ability to communicate effectively Ability to commute between school sites Create high accountability for one’s self as well as building staff and vendors Any current FDNY certificates of fitness, HVAC or plumbing certifications a plus Excellent organizational and problem-solving skills, and strong attention to detail Commitment to the mission and goals of DREAM Charter School Ability to lift up to 50 pounds and have no difficulty bending, standing, climbing or walking, for short or long periods of time. Physical Demands of Position The physical demands described here are representative of those that must be met by an employee to successfully perform the essential responsibilities and functions of the job and are not meant to be all inclusive. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential responsibilities and functions of the job. Unless reasonable accommodations can be made, while performing this job the staff member shall: Stand, walk, bend, reach overhead, lift heavy objects, climb ladders, work at heights, and in tight spaces Reach with hands and arms and use hands and fingers to handle objects and operate tools, computers, and/or controls Use close vision, color vision, peripheral vision and depth perception along with the ability to focus vision Working Expectations • Start Date: Immediate Hours are generally in 8 hour shifts between 7am - 4pm with once-monthly Saturdays (8am-2pm) and occasional after hours or other weekend work. Work primarily completed at 1991 2nd Ave. in East Harlem Benefits and Paid Time Off • We offer comprehensive benefits including:, • Flexible Medical Health Plans, subsidizing the majority of costs for the employee, their spouse/domestic partner and children;, • The ability to select between a variety of medical plans according to what best suits the employee’s needs;, • Dental and vision plans;, • Disability benefits;, • Life insurance;, • Up to 12 weeks fully paid of Parental Leave;, • Flexible spending account options;, • Pre-tax commuter benefits (parking and transit);, • Fitness and entertainment discounts;, • A variety of support through our employee assistance program (EAP);, • 403(b) retirement plan with employer match starting at 4% after one year, with increases tied to DREAM tenure;, • Referral, performance, and tenure milestone bonuses;, • Discounted school meals through our in-house Scratch Food Program;, • Tuition reimbursement support;, • Access to a professional development fund;, • Benefits are subject to change.Compensation, • DREAM offers a competitive salary commensurate with relevant experience. The incoming annual salary range for this position is 40,000 to 50,000. New hires are typically brought into the organization at a salary closer to the start of the range depending on qualifications, internal equity, and the budgeted amount for the role. All regular employees receive annual compensation increases and have the opportunity to earn both performance- and tenure-based bonuses. Because we value tenure in each role, our salary ranges are not capped.Our Commitment to Diversity, Equity, and Inclusion At DREAM, diversity, equity, and inclusion are a matter of mission. From our schools to our playing fields, DREAM is committed to building a team where each individual can bring their full identity and experience to work because representation matters—it enriches our team culture, enhances our ability to innovate, and strengthens our impact in and out of the classroom. DREAM engages staff that represent and appreciate the diversity of our majority Black and Hispanic student body, while working to ensure that our practices are equitable, welcoming, and productive. We are dedicated to creating a world where youth, especially youth of color, have permission to dream—along with the tools and opportunities to make their dreams reality. Come dream with us. DREAM Maxims All Kids Can. This Kid Can.DREAM is Family.Fun is a Serious Value.Teamwork Makes the DREAM Work.Fail. Persist. Exceed.DREAM Big. Applying to DREAM We know applying for a new job can be a daunting process. In addition, studies have shown that historically underrepresented individuals often only apply to roles if they meet 100% of the qualifications. We encourage all applications! You may be just the person we need. If you have any questions about your application or interview process, do not hesitate to ask your recruiter; we are here to help! DREAM provides reasonable accommodations for qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local laws. If accommodation is needed to participate in the job application or interview process, please contact your recruiter. If you are a current DREAM employee, please click here to review our Internal Selection Process before applying. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description In addition to the responsibilities below, the Programmer will be responsible for the overall success of software design, database creation, and the implementation of procedures and standards used in the programming of controls projects. Responsibilities: As key member of the Albireo team, the Programmer will be responsible for developing unit controller programming and designing interface graphics of building automation systems to include, but not limited to: • Review of project specifications, drawings and project specific documents to establish project intent., • Breakdown scope of work into manageable segments and post to Project Manager for scheduling., • Attend or receive meeting minutes from graphics review meetings with customers., • Posting project programming specific “Request for Information” (RFI) documentation to System Engineer, Project Manager and Engineering Manager., • Follow sequence of operations as required by project documents and engineered sequence of operations, utilizing established standards and libraries., • Assist in startup and commissioning of large systems, such as AHUs, chiller plants, or other utilities systems. Includes installation/configuration of workstations, servers, and network., • Work independently or be part of small collaborative teams., • Work with field technicians to troubleshoot and take corrective action to software issues., • Troubleshoot and correct BMS integration issues. Requirements • Bachelor’s degree in Mechanical Engineering, Electrical Engineering or Computer Science is preferred., • Degree may be offset by 3+ years programming BAS systems., • Experience with Schneider Ecostruxure, Tridium Niagara and/or JCI CCT/Metasys, • Understanding of mechanical HVAC equipment and sequence of operations., • Experience with building automation programming (Function Block, Ladder, or Text-based preferred) or other programming languages (e.g. C, C++, Java, VBA). Tridium system experience, preferred., • Thorough understanding of electrical and network wiring and the programming of BAS components., • Excellent computer skills and strong understanding of MS Office products (Word, Excel); AutoCAD, Visual Basic, Visio., • Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Strong understanding of Modbus and BACnet protocols and integration of these technologies into BAS systems., • Ability to travel to and work on construction sites for commissioning/startup. Salary Range: $80K-$135K/yr. DOE. Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description In addition to the responsibilities below, the Programmer will be responsible for the overall success of software design, database creation, and the implementation of procedures and standards used in the programming of controls projects. Responsibilities: As key member of the Albireo team, the Programmer will be responsible for developing unit controller programming and designing interface graphics of building automation systems to include, but not limited to: • Review of project specifications, drawings and project specific documents to establish project intent., • Breakdown scope of work into manageable segments and post to Project Manager for scheduling., • Attend or receive meeting minutes from graphics review meetings with customers., • Posting project programming specific “Request for Information” (RFI) documentation to System Engineer, Project Manager and Engineering Manager., • Follow sequence of operations as required by project documents and engineered sequence of operations, utilizing established standards and libraries., • Assist in startup and commissioning of large systems, such as AHUs, chiller plants, or other utilities systems. Includes installation/configuration of workstations, servers, and network., • Work independently or be part of small collaborative teams., • Work with field technicians to troubleshoot and take corrective action to software issues., • Troubleshoot and correct BMS integration issues. Requirements • Bachelor’s degree in Mechanical Engineering, Electrical Engineering or Computer Science is preferred., • Degree may be offset by 3+ years programming BAS systems., • Experience with Schneider Ecostruxure, Tridium Niagara and/or JCI CCT/Metasys, • Understanding of mechanical HVAC equipment and sequence of operations., • Experience with building automation programming (Function Block, Ladder, or Text-based preferred) or other programming languages (e.g. C, C++, Java, VBA). Tridium system experience, preferred., • Thorough understanding of electrical and network wiring and the programming of BAS components., • Excellent computer skills and strong understanding of MS Office products (Word, Excel); AutoCAD, Visual Basic, Visio., • Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Strong understanding of Modbus and BACnet protocols and integration of these technologies into BAS systems., • Ability to travel to and work on construction sites for commissioning/startup. Salary Range: $80K-$135K/yr. DOE. Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionDescription: Controlled Combustion is the leading heating contractor in NYC. We serve a variety of industries, including luxury apartments, hospitals, universities, and more. With over 150 employees, our team is as diverse as the services we offer. We’re looking for a hands on Electrical Foreman / Project Manager to oversee the electrical scope for boiler rooms, burner upgrades, controls, and capital improvement projects across NYC. Please note that this is a field first, in person role. Most time will be spent on active job sites across the five boroughs with regular visits to our Bronx headquarters. Hybrid/remote is not available for this position. Responsibilities • Lead day to day field operations for the electrical scope: plan work, set goals, assign tasks, and supervise crews and subcontractors., • Interpret plans/specs; perform layout for feeders, panels, EMT/RMC, junction boxes, equipment terminations, and control wiring., • Oversee installation, testing, and commissioning of motors, starters, VFDs, PLC adjacent control wiring, sensors, and BMS interfaces in boiler/mechanical rooms., • Coordinate closely with plumbers, HVAC techs, burner/controls technicians, and site supers to sequence work in occupied buildings., • Develop short interval schedules; attend project meetings; run daily huddles and toolbox talks., • Order, stage, and track materials, tools, and rental equipment; manage vendors for on time deliveries., • Maintain documentation: daily reports, as builts, redlines, submittals, RFIs, change orders, and closeout packages., • Enforce safety policies (OSHA, NYC DOB, site specific rules); conduct jobsite inspections and corrective actions., • Coordinate inspections and utility cutovers; interface with AHJs (DOB/Con Edison) as needed., • Drive quality control: pre functional checks, point to point testing, start up/commissioning support, and punch list closure. Schedule • Full time, Monday–Friday., • Day shift; occasional evenings/weekends for cutovers or emergencies., • Overtime as needed based on project timelines. Benefits • 401(k), • Dental insurance, • Health insurance, • Health savings account, • Paid time off, • Vision insurance Work Location In person; Bronx, NY 10458 (required). Daily travel to project sites across NYC. Requirements: Qualifications / Skills • Strong planning, organization, and crew leadership; capable of running multiple jobs at once., • Expert knowledge of the NEC and working familiarity with the NYC Electrical Code for commercial/multifamily work., • Ability to read/markup electrical drawings and risers; produce simple sketches and take offs., • Proficient with 120/208V and 277/480V three phase power distribution, motor controls, and low voltage control circuits., • Experience with VFDs, starters, interlocks, safeties, and integration with burner/boiler control systems and BMS., • Strong communication and documentation; comfortable with MS Office (Outlook/Excel/Word) and mobile project apps., • Proactive, detail oriented problem solver who thrives in fast paced, occupied environments. Certifications & Licensure • OSHA 30 (required) and NYC Site Safety Training (SST) (preferred)., • Valid NYS Driver License (required). Minimum Education & Work Experience • High school diploma or equivalent (required); completion of an electrical apprenticeship or trade school (preferred)., • 7+ years in the electrical trade with 2+ years leading crews as a foreman or assistant PM., • Experience in heating, oil & gas, boilers/burners, HVAC/mechanical rooms, or construction in NYC is a strong plus.

A leading sustainability-focused employer is seeking an experienced professional to optimize refrigeration and building automation systems. This fully remote position requires over 7 years of experience in refrigeration controls and system integration.