Trabajos brake en Trenton, New JerseyCrear alertas

Job Description Job Summary: The Trailer Technician is a senior-level technician responsible for the advanced maintenance, repair, and inspection of semi-trailers to ensure they are safe, efficient, and roadworthy. Primary duties of this role include diagnosing a wide range of mechanical, electrical, and structural issues, repairing or replacing damaged components, and providing expert recommendations on trailer upkeep. The Trailer Technician A uses specialized tools and equipment to perform major repairs on various trailer types, such as air brake repairs, suspension adjustments, electrical wiring, and axle wheel assemblies. Success in this role requires in-depth technical knowledge, problem-solving skills, a strong knowledge of trailer systems, and the ability to work in a fast-paced environment. This position is safety sensitive. Duties/Responsibilities: • Independently diagnose and repair various trailer components, including electrical wiring, roofs, panels, upper couplers, and rear door frames, • Troubleshoot and repair all aspects of air braking systems including ABS, • Troubleshoot and repair all aspects of spring and air ride suspensions, with an understanding of height control valves and manual and automatic dump valves, • Using proper torque procedures, complete axle wheel assemblies including proper installation of hub and drum assemblies, bearings, seals, and races, • Troubleshoot and repair all aspects of electrical wiring systems, including all lights, 7-way receptacles, interior lighting and switches, • Diagnose and repair body and undercarriage damage on all trailer types, ranging from small panel replacements to complex structural repairs, • Perform diagnoses and maintenance on refrigeration units, • Perform preventative maintenance, which includes maintaining proper oil levels in hubcaps, ensuring proper air pressure in tires, greasing all fittings, ensuring proper adjustments on S-cam brakes, and performing minor light repairs and replacements, • Provide guidance, support, and training to Level B and C technicians and trainees, • Provide expertise on complex repairs and recommend long-term solutions for recurring issues, • Complete work orders in accordance with SOPs, • Accurately document all work performed and parts listed, • Participate in ongoing training and professional development, • Adhere to all safety standards and SOPs during all repair activities, including the use of personal protective equipment (PPE) such as safety glasses and hearing protection Required Skills/Abilities: • Mechanical expertise and advanced technical skills, • Strong understanding of tools and specialized equipment used in trailer maintenance, • Proven ability to independently perform complex repairs, • Advanced carpentry, welding, and/or fabrication skills, • Advanced knowledge of trailer systems, • Strong understanding of DOT regulations, • Basic proficiency with computer systems, • Safety awareness, • Strong problem-solving skills and attention to detail Education/Experience: • Five or more years of trailer maintenance and repair experience and/or training, • Experience in the trailer/transportation industry Supervisory Responsibilities: • None Physical Requirements: • Frequent standing, walking, bending, kneeling, crouching, and crawling in confined spaces, • Manual dexterity to operate hand and power tools, • Ability to work at heights using lifts and ladders, • Ability to lift and move up to 40 pounds Work Environment: • Repair shop and outdoor environment, • Regular exposure to outside weather conditions, • Exposure to loud noise, vibration, dust, grease or oil, and fumes or airborne particle

Job DescriptionBenefits/Perks • Careers Advancement Opportunities, • Flexible Scheduling, • Competitive Compensation Job SummaryWe are looking for an Automotive / Diesel Technician to join our growing dealership service center. As an Technician, you will be responsible for diagnosing and repairing emergency vehicles. You must be comfortable using the dealership’s computer software and have knowledge of vehicle systems. If you have a “never give up” attitude and are willing to problem-solve until you find the best solution for the customer, we want to hear from you. Responsibilities • Use your expertise and tools to evaluate vehicle malfunction codes, • Assist with establishing service center procedures for tracking repair status, maintaining technical documentation, and other necessary protocols, • Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements, • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes, • Ensure a high level of customer satisfaction and repeat business, • Convey necessary vehicle repair information to customers in a clear and concise manner Qualifications, • High school diploma or GED is required, • Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred, • Strong customer service and communications skills are required

Job DescriptionBenefits: • 401(k), • Health insurance, • Training & development At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for automotive technicians/mechanics that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas automotive technician, you’ll be exposed to and have responsibility for performing a wide range of diagnostics, repairs and maintenance, including: • Diagnostics using state-of-the-art computer systems, • Tires and tire repair, • Car heating and air conditioning, • Steering and suspension, • Belts and hoses, • Radiator and engine cooling systems, • Batteries, starting and charging, • Steering and suspension, • Brakes and brake repair, • Oil changes, • Check engine light, • Mufflers and exhaust services, • Visual safety and courtesy inspectionsQualifications, • Ability to repair vehicles independently, while also having experience working well in a team environment, • Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics, • Track record of high personal productivity, • Knowledge of, and adherence to, safety and environmental standards for repair facilities, • Experience using shop equipment such as lifts, tire changing equipment, alignment machines and scan tools, • High School Diploma or equivalent - technical degree a definite plus, • State-specific auto repair certifications, • Valid driver’s license, • Own tools/equipment (diagnostic scanner / tools preferred also), • Able to service both foreign and domestic vehicles

Job Description We're looking for Automotive Mechanics with a minimum of 6 months of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-Level Technician, you'll be expected to perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Experienced Technician (min 5 years of professional experience): perform extensive repairs and heavy engine work, as well as advanced vehicle diagnostics on all makes and models, including electric and hybrid vehicles We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment Pay Range: $20-$22 Hourly About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionBenefits: • Unlimited Commission Program, • Health insurance, • Paid time off, • 401(k), • Bonus based on performance At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for a Master Technician (A Tech) that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility, and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas general service technician, you’ll be exposed to and have responsibility for performing a wide range of automotive maintenance services, including: • Perform a thorough visual safety and courtesy inspection., • Identify mechanical problems visually or with computer diagnostic equipment., • Performs tests on specific parts and systems to determine whether they are operating properly., • Performs routine and preventative maintenance including oil changes and tune-ups., • Repairs or replaces malfunctioning parts and systems such as but not limited to brake pads, belts, water pumps, transmissions, and motors., • Welding knowledge, • Test drive vehicles to confirm that repairs have been made properly., • Ability to lead a shop to success, • Performs other related duties as assigned. Qualifications • ASE certification preferred but not required., • Extensive knowledge of all aspects of vehicle maintenance and repairs., • Excellent analytical and problem-solving skills., • Proficient with related computer diagnostic equipment and software., • Ability to perform repairs in a timely manner., • Ability to read service manuals, repair manuals and work orders., • Valid driver’s license Qualities that make you stand out from the rest: · Excellent diagnostic skills · Team player · Completes every job/tasks in a timely manner · Excellent work ethics · Pushes themselves to learn more · Quality controls vehicles to avoid comebacks · Completes thorough courtesy checks in a timely manner

Job DescriptionBenefits: • Employee discounts, • Paid time off, • Free uniforms, • Opportunity for advancement, • Training & development Benefits/Perks • Careers Advancement Opportunities, • Competitive Compensation Job Summary We are looking for an Automotive Technician to join our independent service center here at A & S Auto Repair. We are family owned and are not your average auto repair center. We do not expect you to be perfect but will hold you accountable for you work and expect the same in return in order to strive to do better! We have a small 3 bay shop with repeat customer that have been with us for over 30yrs! We are continuously upgrading equipment to keep up with the demands of todays vehicles. We also are interesting in continuing education on us! Come grow with us! As an Automotive Technician, you will be responsible for diagnosing and repairing vehicles. You must computer software and have extensive knowledge of vehicle systems. Certain shop tools are provided. Training can and will be provided. If you have a “never give up” attitude and are willing to problem-solve until you find the best solution for the customer, we want to hear from you. Responsibilities • Use your expertise and diagnostic tools to evaluate vehicle malfunction codes, • Assist with establishing service center procedures for tracking repair status, maintaining technical documentation, and other necessary protocols, • Carry out routine vehicle maintenance tasks such as suspension work, oil changes, brake service, alignments, • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes, etc..., • Ensure a high level of customer satisfaction and repeat business, • Convey necessary vehicle repair information to customers in a clear and concise mannerA & S Auto Repair 138 Toronita ave Hamilton, nj 08610 6095877766 Aandsautorepair26@gmail.com

Job DescriptionBenefits: • Uncapped Commissions, • 401(k), • Bonus based on performance, • Health insurance, • Paid time off At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for an Intermediate Level Technician (B Tech) that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility, and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas general service technician, you’ll be exposed to and have responsibility for performing a wide range of automotive maintenance services, including: • Perform a thorough visual safety and courtesy inspection., • Performs tests on specific parts and systems to determine whether they are operating properly., • Mounting, balancing and rotating tires, • Replacing batteries, • Changing bulbs, belts and hoses, • Repairs or replaces malfunctioning parts and systems such as but not limited to brake pads, belts, tires and water pumps., • Performs routine and preventative maintenance including oil changes and tune-ups., • Ability to work on more complex jobs with some assistance such as diagnostics., • Test drive vehicles to confirm that repairs have been made properly., • Maintaining and cleaning shop areas, • Willingness to learn and grow as a technician, • Performs other related duties as assigned. Qualifications • ASE certification preferred but not required., • Intermediate level technicians must have prior knowledge of automotive basics., • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills with some assistance., • Ability to perform repairs in a timely manner., • Ability to read service manuals, repair manuals and work orders., • Valid driver’s license Qualities that make you stand out from the rest: · Problem solving skills · Willing to learn · Team player · Completes thorough courtesy checks with a heavy focus on maintenance. · Respectful · Quality controls work

Job Description We're looking for Automotive Mechanics with a minimum of 1 year of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Brake & Tire Technician, you'll be expected to perform light maintenance or repairs, including changing brakes and tires and performing: • Technician services, such as routine inspections/maintenance, • Basic mechanical repair for brake pads/calipers/rotors, tire installations, and wheel alignments At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Range: $21 - $25 / Hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Experienced Technician (min 5 years of professional experience): perform extensive repairs and heavy engine work, as well as advanced vehicle diagnostics on all makes and models, including electric and hybrid vehicles We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

We are seeking a Manual Machinist to join our manufacturing team and support the production of precision components and equipment. This role focuses on building, modifying, and prototyping custom components and mechanical systems used in product development. The Key Responsibilities: - Previous experience working in a machine shop or manufacturing environment - Assemble and test mechanical systems and components - Read and interpret drawings, blueprints, and schematics - Operate manual lathes and mills to machine parts according to blueprints, drawings, and specifications. - Operate a brake press to bend and form metal components as needed. - Work closely with engineers and designers to troubleshoot and refine prototypes - Must have 5+ years of machining and fabrication experience preferred - Must have basic math and measurement skills - Must be able to read and understand drawings and work orders - Must have strong experience with manual mills and lathes - must have strong mechanical aptitude with hands on experience By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at

Job DescriptionDescription: Overview Join our dynamic automotive team as a Commercial Service Writer, where your expertise in automotive service management and customer service will drive exceptional experiences for our clients. In this vital role, you will serve as the communication bridge between customers and our skilled technicians, ensuring clear understanding of vehicle issues, repair options, and service recommendations. Your energetic approach and mechanical knowledge will help streamline operations, promote upselling opportunities, and foster lasting customer relationships. This position offers an exciting opportunity to be at the forefront of automotive repair and sales, contributing to a high-performance environment dedicated to excellence. Duties • Greet customers promptly and professionally, assessing their vehicle service needs with enthusiasm and clarity, • Write detailed service estimates by diagnosing vehicle issues through automotive diagnostics and mechanic experience, • Communicate repair recommendations effectively, including oil changes, brake repairs, transmission work, tire services, suspension, alignments, shocks & struts, diesel engine repairs, air brake systems, and auto body repairs, • Upsell additional services such as wheel alignments, tire rotations, or transmission diagnostics to maximize customer value, • Coordinate with technicians to prioritize repairs and ensure timely completion of services while maintaining high-quality standards, • Handle cash transactions accurately and process payments efficiently while maintaining integrity in cash handling procedures, • Maintain thorough documentation of all service work performed and communicate clearly with customers about their vehicle status and future maintenance needs Skills • Must have Mitchell experience, • Proven dealership experience or background in automotive service management with a strong understanding of automotive repair processes, • Extensive knowledge of mechanical systems including transmissions, oil changes, brakes, suspensions, shocks & struts, tire services, diesel engines, auto body repair, and air brake systems, • Skilled in automotive diagnostics and auto estimating software to generate accurate repair quotes, • Exceptional customer service skills with the ability to explain technical issues in an understandable manner, • Strong sales aptitude with a focus on upselling additional services to enhance customer satisfaction and shop revenue, • Experience in service writing combined with mechanic or technician background is highly desirable, • Familiarity with vehicle maintenance procedures such as alignment adjustments and suspension repairs is a plus This role is perfect for motivated individuals eager to leverage their automotive expertise in a fast-paced environment that values energetic communication and technical proficiency. Join us to help keep vehicles running smoothly while delivering outstanding service that keeps customers coming back! Requirements:

Goodyear - 1417 E Lincoln Hwy - Responsibilities: Service delivery vans and DOT vehicles for scheduled preventative maintenance at a client site; Perform line technician services such as oil changes and tire services, routine inspections/maintenance, system diagnostics, brake repairs, fluid exchanges/flushes, preventative maintenance, and tire installation; Conduct advanced repairs and state inspections; Participate in training that may occur in a customer retail environment before working on the client site; Maintain DOT regulated inspections and ensure safety and compliance

Cox Automotive - USA Job Family Group: Vehicle Operations Management Level: Individual Contributor Flexible Work Option: Can work remotely but need to live in the specified city, state, or region Travel % Yes 100% of the time Work Shift: Variable Compensation: Hourly base pay rate is $24.09 - $36.11/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. * If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS3 to 317-597-8130 * $3500 New Hire Bonus - 50% after 30 days and 50% after 180 Days Cox Fleet keeps your fleet moving! Cox Fleet has grown to become one of the largest fleet maintenance companies in the country.Cox Fleet is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. Cox Fleet also services customers utilizing its 50+ nationwide service centers; each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and provide scheduled maintenance services and unscheduled services to fleets anywhere, anytime. To support growth of the company, Cox Fleet is currently hiring a Mobile Trailer Technician II to join our team! This is a dedicated on-site position and we do not provide emergency side of the road type of repairs. If you are looking for a new place to call home, we would love to talk to you! The Mobile Trailer Technician II will be responsible for performing certified DOT inspections, Preventative Maintenance inspections, light repairs, and other duties as assigned such as trailer brakes, air lines, auxiliary pumps, and engines, liftgates, brake chambers, welding, fabrication, replacement of panels, body and framework. Work performed at the customer's site. The Mobile Trailer Technician II can perform more advanced repairs under the supervision of a Sr Mobile Trailer Technician or higher. The Mobile Trailer Technician II assists Sr Mobile Trailer Technician or higher Technicians with repairs and continues to learn additional advanced mechanical skills. A successful Mobile Trailer Technician II complies with all company policies and achieves high level performance metrics. • Preventive Maintenance and repairs on ThermoKing, Carrier and other refrigeration equipment, Preventive maintenance and repair, DOT inspections on Freightliner and Mack Trucks, trailers out of Service Truck with little or no supervision., • Diagnose and repair/replace compressors, coils, electrical components, etc, • Always follows and complies with safe operating practices and procedures., • Independently manage parts inventory and equipment provided on company-issued service truck and perform periodic reconciliation., • Maintain and operate company-issued service vehicle, conduct safety checks, and pre-/post-trip inspections of vehicle., • Applies knowledge that is acquired through formal training or on-the-job experience to perform one's job; works with, understands, and evaluates technical information related to the job., • Work with and listen effectively to clients and customers to assess their needs, providing information or assistance, resolving their problems, or satisfying their expectations., • Manage concurrent assigned tasks, making effective judgments as to prioritizing work-related activities and time allocations., • Act with integrity, demonstrate honesty and keep commitments. Behave in a consistent manner, keeping sensitive information confidential and adhering to ethical and professional standards., • Perform scheduled preventative maintenance ("PM"), DOT Inspections and follow up repairs on trailers and equipment in a mobile/field environment., • Respond to call center dispatched unscheduled service and maintenance request., • Use hand tools, precision instruments, as well as Trailer tools, welding equipment, and jacks., • Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders ("RO") using company issued iOS device and our proprietary TRAIT application, • Accurately complete DOT forms and all other forms of documentation in a timely fashion., • Work with a high degree of independence and manage own daily schedule., • Maintain a high level of productivity and be able to work within or close to most Standard Repair Times., • Obtain parts from approved local and national vendors as necessary for the repairs to be performed., • Communicate with management and support team via email or phone to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes., • Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT., • Participate and complete all-in company required safety training., • Establishes and maintains good working relationships with assigned customers and vendors. Communicate effectively both verbally and in writing., • Maintain company issued service truck, conduct safety checks and daily pre/post trip inspections., • Perform minor adjustment and repairs on various types of trailers equipment and systems including, but not limited to the following: trailer brakes, air lines, auxiliary pumps and engines, liftgates, and brake chambers, • Adhere to company policies, processes, and procedures., • Remain up to date on safety protocols and procedures., • Diagnose, adjust, and perform repairs on various types of trailer equipment, and systems including, but not limited to the following: trailer brakes, air lines, auxiliary pumps and engines, liftgates, brake chambers, welding, fabrication, replacement of panels, body, and framework., • Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives., • Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers and pressure gauges., • Assist Mobile Trailer Technician I with diagnostics., • High School Diploma/GED and 3 years' experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED in a related discipline; or 5 years' experience in a related field., • At least 3 years of experience with refrigerated equipment, • Possess and supply a set of hand tools necessary to perform required job duties., • Obtain Automotive Service Excellence (ASE) certification T8 (PMI) within eighteen (18) months., • Obtain 608/609 certification within eighteen (18) months., • This position follows regulations issued by the Department of Transportation's (DOT) Federal Motor Carrier Safety Administration (FMCSA). Candidate must be able to successfully complete and pass a DOT-regulated pre-employment background screening and DOT physical prior to employment., • A current and valid DOT medical card with more than four (4) months remaining until its expiration may be submitted in lieu of a DOT physical. If the DOT medical card has four (4) months or less of validity remaining, a DOT physical will be required., • Due to interstate operating authority commerce regulations, candidates must be at least 21 years or older., • Safe drivers needed; valid driver's license required. Candidate must hold a valid state-of-residence driver's license, be able to obtain and maintain their Driver Qualification File. Required or Obtained Within 18 Months: • ASE T8 (PMI) certification Preferred Certifications: • ASE 608/609 certification*, • ASE T4 (Brakes) certification, • ASE T5 (Suspension) certification, • ASE T6 (Electrical and Electronic Systems), • ASE T7 (HVAC) certification, • Knowledge of trailer parts and systems, including their designs, uses, repair, and maintenance, to make repairs or perform maintenance services.

Job Description Bergey’s Inc. is a family-owned business that has been servicing our customers’ needs since 1924. Currently our company has over 50 locations and more than 1,800 team members. Today our family of automobile, truck and tire companies stretch throughout Pennsylvania, Delaware, Maryland, & New Jersey. Visit us at www.bergeys.com to learn more about our company. We strive to provide an environment for our associates and customers that is welcoming, transparent, and forward thinking. Our employees are our greatest asset. We promote and develop individual strengths, as well as grow our employees personally and professionally. Together we can make a difference. We are looking for a Mobile Maintenance Technician to operate an on-road service truck (bay on wheels) and assist customers with warranties, preventive maintenance, and repair services on medium- and heavy-duty vehicles. This role is a Tuesday-Saturday opportunity. This role requires traveling to customer facilities or distribution centers to deliver high-quality mobile service. Pay: Starting at $35.00 per hour based on experience $5,000.00 sign on bonus! Location: Bergey's Truck Center-Trenton, NJ Key Responsibilities: • Perform scheduled preventive maintenance (PM) services, DOT inspections, and follow-up repairs on light-, medium-, and heavy-duty vehicles in a field environment., • Diagnose, adjust, and repair truck systems, including:, • Electrical, wiring, and cooling systems, • Starters, alternators, fan clutches, and engine electronics, • Air conditioning systems, • Diesel and gas engines, transmissions (manual/automatic), clutches, differentials, • Hydraulic and steering systems, air brake systems, • Collect and document repair information; communicate effectively with customers, vendors, and internal teams., • Upload pictures, parts usage, and repair findings into Repair Orders (“RO”) using a company-issued iOS device and our proprietary TRAIT application., • Complete all DOT and company documentation accurately and on time., • Maintain and operate a company-issued service truck, including safety checks and pre-/post-trip inspections., • Work independently, managing your own schedule and productivity while meeting Standard Repair Times., • Use logic and reasoning to troubleshoot, evaluate alternatives, and recommend effective solutions. Qualifications: • Mechanical repair experience 2 years minimum (diesel, automotive, or related field)., • Willingness to learn about our products and systems., • Self-motivated with strong initiative., • Clean driving record and current DOT Medical Card., • Possess and supply a set of hand tools required for the job., • Basic understanding of:, • Electrical systems and wiring, • Air conditioning systems, • Engines (gas and diesel), • Air brake systems, • Successful completion of pre-employment background checks and drug screening. What we have to offer: • No after-hours emergency call-outs – enjoy work-life balance., • Take your service truck home daily (stop paying for gas!)., • Company-provided laptop and cellphone., • Uniforms with laundry service provided., • Safety boots and safety glasses reimbursement., • Extreme weather gear (hot and cold)., • Opportunities to work independently and grow with a supportive team., • Vacation and PTO time, • Paid Holidays, • 401k with profit sharing, • Medical, Dental and Vision insurance., • Employee Assistant Program, • FSA and HSA Plans, • Life Insurance, • Opportunities for Advancement, • Paid Training, • Employee Referral Program, • Employee Discount, • Incentivized Training Bergey's is an Equal Opportunity Employer.

Cox Fleet headquartered in Indianapolis, is one of the largest fleet maintenance companies in the country. Cox Fleet is the leading provider of on-site mobile maintenance and repair services nationwide. We are currently hiring a Mobile Diesel Technician II. The Mobile Diesel Technician II will be responsible for performing licensed DOT inspections, Preventative Maintenance inspections, light and advanced repairs, advanced mechanical/hydraulic/electrical and electronic diagnostics, and other duties as assigned. Duties: • Perform scheduled preventative maintenance ("PM"), DOT Inspections and follow up repairs on light, medium and heavy-duty vehicles in a mobile/field environment., • Perform minor adjustment and repairs on various types of truck equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas and diesel), Transmissions (manual and automatic), Clutches, Differentials, etc., • Diagnose, adjust, and repair various types of truck equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas and diesel), Transmissions (manual and automatic), Clutches, Differentials, etc., • Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers and pressure gauges., • Road test vehicles to diagnose malfunctions and to ensure that they are working properly., • Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives., • Independently manage parts inventory and equipment provided on company-issued service truck and perform periodic reconciliation., • Maintain and operate company-issued service vehicle, conduct safety checks, and pre-/post-trip inspections of vehicle., • Work with and listen effectively to clients and customers to assess their needs, providing information or assistance, resolving their problems, or satisfying their expectations., • Manage concurrent assigned tasks, making effective judgments as to prioritizing work related activities and time allocations., • Use hand tools, precision instruments, as well as Diesel tools, welding equipment, lift and jacks., • Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders ("RO") using company-issued iOS device and our proprietary TRAIT application., • Accurately complete DOT forms and all other forms of documentation in timely fashion., • Work with a high degree of independence and manage own daily schedule., • Maintain a high level of productivity and be able to work within or close to most Standard Repair Times., • Obtain parts from approved local and national vendors as necessary for the repairs to be performed., • Communicate with management and support team via email or phone to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes., • Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT., • Maintain company issued service truck, conduct safety checks and daily pre/post trip inspections. Requirements: • High School Diploma/GED and 3 years' experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED in a related discipline; or 5 years' experience in a related field., • At least 3 years of experience with refrigerated equipment, • Possess and supply a set of hand tools necessary to perform required job duties., • OEM training and certifications are preferred., • Participate in and complete all-in company required training, • This position follows regulations issued by the Department of Transportation's (DOT) Federal Motor Carrier Safety Administration (FMCSA). Candidate must be able to successfully complete and pass a DOT-regulated pre-employment background screening and DOT physical prior to employment., • A current and valid DOT medical card with more than four (4) months remaining until its expiration may be submitted in leu of a DOT physical. If the DOT medical card has four (4) months or less of validity remaining, a DOT physical will be required., • Due to interstate operating authority commerce regulations, candidates must be at least 21 years or older., • Safe drivers needed; valid driver's license required. Candidate must hold a valid state-of-residence driver's license, be able to obtain and maintain their Driver Qualification File. Required Certifications or Obtained Within 18 Months: • ASE T8 (PMI) certification, • ASE 608/609 certification* Preferred Certifications: • ASE T2 (Diesel Engines) certification, • ASE T3 (Drivetrain) certification, • ASE T4 (Brakes) certification, • ASE T5 (Suspension) certification, • ASE T6 (Electrical and Electronic Systems), • ASE T7 (HVAC) certification, • ASE A8 (Engine Performance) certification, • ASE L1 (Advanced Engine Performance Specialist), • ASE L2 (Electronic Diesel Engine Diagnosis Specialist) certification Skills & Abilities: • Understand the implications of new information for both current and future problem-solving and decision-making., • Ability to lift, bend, climb, stand, and walk for long periods of time; ability to perform moderately heavy laboring work, • Ability to exert oneself physically over long periods of time without tiring, which may include performing repetitive tasks., • Communicates information (for example, facts, ideas, or messages) in a succinct and organized manner., • Engages in effective two-way communication with individuals and groups., • Ability to determine the type of tools and equipment needed., • Ability to accurately judge which of several objects is closer or farther away from the observer, or the distance between an object and the observer., • Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Why Cox Fleet? • Weekly pay get paid every Friday for added convenience and financial flexibility, • Safe driving & tech efficiency bonuses, • Safety boots & safety glasses reimbursement, • Extreme weather gear (cold & hot), • Uniforms provided with laundry service where available, • Take the service truck home daily (stop paying for gas!), • Tablet & company cellphone provided, • Technical training provided to advance your career, • Dedicated career path Over 50% of our front-line managers are promoted from within, • Benefits: Health, dental, vision insurance starts DAY ONE of employment. 401(k) matching starts after 90 days, 100% match up to 6% contribution and an additional 2% discretionary contribution by the company. Accrue up to 200 hours (5-weeks) of Paid Time Off based on your tenure with the company. Tuition Assistance/Reimbursement Adoption/Surrogacy assistance Pet Insurance Multiple ERG, diversity groups, and company paid volunteer hours. Employee discounts on new vehicle purchases, cellphone plans, ridesharing, home/rental insurance, wellness/fitness incentives and much more.

Diesel Truck/Tractor, Trailer and forklift mechanic providing maintenance for MEI fleet of forklifts (6k lb. to Versa Lift 60/80k) Peterbilt and KW tractors and Landoll/KS RGN flatbed trailers. Essential Job Duties and Responsibilities: • Mid-level mechanic work on diesel vehicles, routine PM service, brake service and hydraulic systems., • Determines vehicle condition by conducting inspections and diagnostic tests, identifying worn and damaged parts., • Basic knowledge of operating equipment (Forklifts, man lifts, mobile platform lifts, etc.), • Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion; completing winterization procedures., • Verifies vehicle performance by conducting test drives, adjusting controls and systems., • Maintains vehicle records by annotating services and repairs., • Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for extensive and complex repairs., • Contains costs by using warranty, evaluating service and parts options., • Keeps supplies ready by inventorying stock; placing orders; verifying receipt., • Enhances maintenance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments., • Complete housekeeping duties in assigned area or project area daily and/or when. Minimum Qualifications (Experience, Skills, and Education): • High School Diploma or GED equivalent, • Minimum two (2) years proven fleet mechanic experience (Heavy Equipment and Vehicles), • Minimum of 1year of intermediate skills working in Microsoft office (Excel, Word, Outlook) Preferred Qualifications (Experience, Skills, and Education) • Construction industry experience, • Ability to use precision measuring tools and equipment, hand, power, and pneumatic tools., • Rigging experience Physical Requirements and Working Conditions: While performing the duties of this job, the employee may frequently climb ladders or stairs, stand; walk; sit; lift and/or move up to 50 pounds; use hands to handle or feel objects, tools, or controls; use fingers and hands to adjust straps, move equipment and perform daily duties; reach with hands and arms; pull handles and grasp equipment; talk and hear. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The General Foreman is subject to possible exposure to extreme year-round outdoor environmental conditions and may also be subject to working weekends and holidays. While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts; may be exposed to risk of electrical shock and vibration, and high levels of noise. Additional Requirements: Work with a Top-of-Mind Awareness for the safety of yourself and everyone at the job site. Must be able to work in a high functioning team environment. Display the highest levels of honesty, integrity, and professionalism. Take pride in your work and in the company. Communicate openly and strive for peak performance in daily tasks. Know and deliver the quality service MEI's customers have come to expect. Disclaimer: This job description is intended to summarize the type and level of work performed by a Mechanic and is not an exhaustive list of all duties, responsibilities, and/or requirements. MEI reserves the right to change or modify this job description or the essential duties of the job, as necessary. MEI is an Equal Opportunity, M/F/Disabled/Vet Preferred Employer.

At Manheim (a Cox Automotive company), we know that it takes a special kind of person to be a vehicle technician. You not only need a love of cars, but also a willingness to get your hands dirty and embrace the art and science of machines. Does this resonate with you? We're hiring an Auto Maintenance Tech I to perform repairs and maintenance on a variety of vehicles. If you're looking for an exciting career with great pay and benefits (plus a sign-on bonus!), apply today. Competitive pay Career growth through Cox Auto University training, opportunity for GED reimbursement, free ASE training/certification and more! 30+ days of paid vacation and company holidays per year (from day 1) for full-time employees because we know you need time to recharge. Up to 44 paid days off with more time on the job. Great healthcare benefits from day 1. Multiple options are available for individuals and families. One employee only plan could be FREE, if you participate in our health screening program. 10 days of free child or senior care through your complimentary Care.com membership. Generous 401(k) retirement plans with up to 8% company match. Great coworkers who love being part of a team. Employee discounts on hundreds of items, from cars to computers to continuing education. You'll perform light duty work as an intermediate-level auto tech. You'll improve your skills in a supportive environment. Other responsibilities include: • Gain familiarity with auto maintenance concepts and practices., • Perform auto maintenance tech duties, including oil and filter change, fuel filter change, transmission flush, spark plugs and vehicle inspection., • Perform battery testing, maintenance and replacement and testing and repairing of starting and charging electrical systems., • Perform various repairs including tires, safety inspections and interior/exterior components., • Diagnose and repair brake systems, steering and suspension systems., • Perform an evacuation and recharge on the AC system., • Perform maintenance on equipment., • Utilize approved vendors to obtain parts., • May up fit new vehicles with necessary equipment, • Complies with applicable procedures and regulations regarding recyclables, fluids, tires, and disposable trash. You're a quick learner especially when it comes to cars and how they work. You're a team player who always arrives at the shop ready to provide excellent work. You also have the following qualifications: • Required: 1 or more years of related work experience., • The ability to drive standard, automatic and electric vehicles., • Safe drivers needed; valid driver's license required, • Preferred: A high school diploma or GED, • Current ASE Certifications: G1, A4, A5 status when required by leadership. Pop the hood of a brand-new career. Apply today!

Pay Rate: $28.00 to $38.00 Depending on experience Direct Hire Immediate Interview and Job Start for Qualified Technicians 1 Total Opening Job Summary: The Mobile Trailer Technician is responsible for responding to service calls and performing a variety of maintenance, repair, and inspections tasks on trailers to ensure they are safe, efficient, and roadworthy. Primary duties of this role include travelling to customer locations for on-site maintenance, diagnosing mechanical, electrical, and structural issues, repairing or replacing damaged components, and providing expert recommendations on trailer upkeep. The Mobile Trailer Technician uses specialized tools and equipment to perform repairs on various trailer types, such as suspension adjustments, brake repairs, electrical wiring, minor body repairs, and more. Success in this role requires a strong understanding of trailer systems, problem-solving skills, and the ability to perform mechanic repairs independently. This position is safety sensitive. Duties/Responsibilities: • Promptly respond to service calls and provide on-site diagnosis and maintenance, • Independently diagnose and repair various trailer components, including suspension systems, electrical wiring, doors, roofs, and panels, • Perform basic air brake maintenance; complete brake jobs, S-cam bushing replacements, brake chamber replacements, and air valve replacements, • Using proper torque procedures, complete axle wheel assemblies including proper installation of hub and drum assemblies, bearings, seals, and races, • Troubleshoot and repair all aspects of electrical wiring systems, including all lights, 7-way receptacles, interior lighting and switches, • Perform minor body repairs and maintenance, such as R&R body side panels, swing and roll-door panels, and roof and floor sections, • Complete minor undercarriage maintenance and repairs, including R&R crossmembers, ICC bumpers, spring hangers, dolly wing plates, and dolly legs and bracing, • Perform preventative maintenance, which includes maintaining proper oil levels in hubcaps, ensuring proper air pressure in tires, greasing all fittings, ensuring proper adjustments on S-cam brakes, and performing minor light repairs and replacements, • Create work orders; accurately document all work performed and parts used in compliance with SOPs, • Monitor and maintain parts inventory for service truck, • Ensure customer satisfaction by completing repairs to a high standard and provide customer service when addressing concerns or answering customer questions, • Participate in ongoing training and professional development, • Adhere to all safety standards and SOPs during all repair activities, including the use of personal protective equipment (PPE) such as safety glasses and hearing protection Required Skills/Abilities: • Mechanical proficiency and technical skills, • Strong understanding of tools and specialized equipment used in trailer maintenance, • Strong carpentry, welding, and/or fabrication skills, • Intermediate knowledge of trailer systems, • Understanding of DOT regulations, • Basic proficiency with computer systems, • Safety awareness, • Strong customer service skills, • Strong problem-solving skills and attention to detail, • Must have a valid driver's license and remain insurable Education/Experience: • Three to four years of trailer maintenance and repair experience and/or training, • Experience in the trailer/transportation industry Supervisory Responsibilities: • None Physical Requirements: • Frequent sitting, standing, walking, bending, kneeling, crouching, and crawling in confined spaces, • Manual dexterity to operate hand and power tools, • Ability to work at heights using lifts and ladders, • Ability to lift and move up to 40 pounds Work Environment: • Service truck and outdoor environment, • Regular exposure to outside weather conditions, • Exposure to loud noise, vibration, dust, grease or oil, and fumes or airborne particles, • Frequent travel to and from customer locations

Immediately hiring!!! Apply today!!! Automotive / Fleet Technician (Night Shift) $25$35/hr + Weekly Pay Full-Time | Immediate openings Work location: 1417 E Lincoln Hwy Levittown, PA 19056 Shift information: 9PM-6AM About the role: What will you do? • Servicing delivery vans and DOT vehicles for scheduled preventative maintenance at a client site, • Perform line technician services such as oil changes and tire services, routine inspections/maintenance, system diagnostics, brake repairs, fluid exchanges/flushes, preventative maintenance, and tire installation, • Advanced repairs and state inspections, • Training for this role may take place in a customer retail environment prior to working on the client site Basic requirements • 2 years of experience performing qualified DOT regulated inspections, preventative maintenance, and brake related services, • Must have DOT Brake Certification, or be willing to obtain within 30 days of hire, • Must have a valid driver's license and meet DOT physical requirements, including being at least 21 years of age Preferred qualifications: • High school diploma or GED preferred, • ASE Certification (s), • Previous experience diagnosing vehicles and performing road tests, electrical, air conditioning, and primary and advanced fuel ignition experience Benefits at a glance: • Comprehensive benefits package: medical, prescription drug, vision, dental, wellness program, life insurance, 401(k) with company matching, paid vacation/sick pay and holidays, tuition reimbursement & employee discounts and safe work environment, • On-going training and further career advancement opportunities About us: Goodyear owns and operates more than 580 tire and auto service centers nationwide and this role would be joining our growing fleet business. As the bridge between fleet owners, managers and other associates you will bring an outstanding service mindset that impacts others, ensures client satisfaction and places safety as a top priority for your team at Goodyear's Fleet Service Centers. Application process: • Within 5 minutes of applying, you'll get an email and text with a link to complete the prescreen questionnaire on any device., • If you pass, you'll receive an invitation to schedule a phone or in-person interview., • Your Goodyear application dashboard shows status updates and your recruiter's contact detail for assistance.

Shift: Day Shift 6:00 am Start Time Location: Morrisville, PA Industry Leading Benefits: Medical, Prescription, Dental, Vision, 401K, Pension, Short and Long Term Disability, Life Insurance, Tuition Reimbursement, Overtime as needed, + NEW AND IMPROVED VACATION TIME! Pay Range: A Mechanic Ranking: $42-46/hour B Mechanic Ranking: $34-42/hour C Mechanic Ranking: $27-34/hour Signing Bonus: A Mechanic Ranking: $15,000 (Paid in $3,000 installments at 30 Days, 90 days, 180 days, 270 days and 365 days)B Mechanic Ranking: $10,000 (Paid in $2,000 installments at 30 Days, 90 days, 180 days, 270 days and 365 days)C Mechanic Ranking: $4,000 (Paid in two $2,000 installments at 90 days, and 180 days) By joining Silvi Materials as a Heavy Equipment Mechanic, you will take pride in working on our CAT heavy equipment at our main shop. Everything from haul trucks, front-end loaders, bulldozers, and excavators, just to name a few. If you enjoy heavy equipment, you should be working for Silvi Materials! Silvi Materials has been expanding our "A" Team of employees since 1947! Our team has grown to 15+ companies, employing over 850 people across 30+ locations in Southeastern Pennsylvania, New Jersey, and North Carolina. Silvi is large enough to provide the stability you need, but small enough that you can feel your individual contribution to our success. We value the fresh ideas and perspectives of each new member of our team. What does Silvi Materials offer you, you may ask? • Phenomenal Benefits: Medical, Vision, Dental, Prescription, Vacation, Paid Holidays, and so much more!, • Your future in mind: With 401(k) (at select locations) and/or pension options. We want all employees to build a great retirement! Growth at Silvi Materials: We offer each employee the opportunity to move into any facet of our complex business. And our tuition reimbursement program is the perfect springboard to help you get there! So, what does a Silvi Materials Heavy Equipment Mechanic do? • Maintain a safe and professional working environment, • Diagnose and perform preventative maintenance for heavy-duty diesel vehicles and equipment., • Remove, repair, rebuild from start to finish and/or replace assemblies (diesel engines, automatic and manual transmissions, axles) sub-assemblies (cylinder heads, oil pumps, fan belts, generators, starters, gauges) and other parts (tie rods, drag links, ball joints, brake linings, bearings) on trucks and equipment., • Perform electrical work including wiring systems and starter rebuilding., • Repair and/or adjust electrical sensors, E. G. R. valves, and computerized electrical systems according to automotive and Federal Government Clean Air Standards., • Diagnose computerized: fuel management systems, ignition systems and engine timing to determine and perform needed repairs. Changes tires., • Weld broken assemblies, subassemblies and/or other parts, as required., • Uses, stores, records, safeguards and properly uses equipment, materials, parts and other supplies., • Maintain shop and work area in a clean and organized manner., • Prepare reports and records of time spent, materials, parts used and work completed., • Required to learn to utilize various types of diagnostic equipment., • Respond and handle road service calls as needed with the use of a company service vehicle. Qualifications Required as a Silvi Materials Diesel Mechanic: • Fleet/transportation, repair and maintenance experience of preferably at least 3 years for a medium to large size company., • Valid Driver's License., • Possess a working knowledge of Hydraulic and Pneumatic systems., • Ability to work independently., • Ability to read and understand maintenance and parts manuals, maintenance and wiring diagrams, schematics and other written instructions related to the maintenance and repair of motor vehicles and equipment., • Knowledge and experience with repair and maintenance of heavy-duty vehicles, • Knowledge and experience with safety regulations, i.e. OSHA, DOT as they apply to the operation, • Ability to perform maintenance and repairs in a garage and/or the field, in conformance with the specifications contained in the applicable maintenance manuals, diagrams and/or instructions., • Possesses a sense of urgency and ownership, • Excellent follow-up skills with the ability to complete assignments/projects through to completion., • Possesses analytical, problem solving and customer service sills., • A valid CDL (A class) license preferred., • A valid PA Inspection License A+ preferred., • A valid Air Conditioning and Refrigeration Technician Certification., • Certification under the federal Department of Transportation guidelines for brake adjustment and repair. Physical Demands In a typical work setting, people in this job: • Use hands to handle, control, or feel objects, tools, or controls., • Stand for long periods of time., • Kneel, stoop, crouch, bend, stretch, twist or crawl., • Hear sounds and recognize the difference between them., • Use fingers to grasp, move, and quickly assemble very small objects., • Hold the arm and hand in one position or hold the hand steady while moving the arm., • See details of objects that are less than a few feet away., • Determine from which direction a sound came., • See differences between colors, shades, and brightness., • Lift 50 pounds regularly and up to 100 pounds on occasion. Use one or two hands to grasp, move, or assemble objects Use muscles to lift, push, pull, or carry heavy objects., • Use stomach and lower back muscles to support the body for long periods without getting tired., • Move two or more limbs together (for example, two arms, two legs, or one leg and one arm) while remaining in place. Silvi Materials does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information.

Courtesy Technicians work in a fast-paced environment and are responsible for timely and accurate service to ensure our guests' of quality workmanship. They are the face of Jiffy Lube, greeting guests on arrival and assisting the J-Team clean exterior windows, vacuum interior floors, and check and adjust vehicle tire pressure. This is an important role in our Jiffy Lube operation and critical to our success. And every J-Team member receives comprehensive training from Jiffy Lube University, our award-winning training program, for certification. Full-Time Perks • Competitive Starting Rate of Pay, • Medical & Dental Insurance, • Paid PTO (personal time off) & Holidays, • Uniforms, Advancement, Company Discounts, • Flexible Work Schedule, a Great Team Environment, and more What's in your Future Career: Many of our J-Team members have been with us for 5, 10, 15 and more years. We offer a unique set of jobs that include customer service, automotive service & repair, service advisor and key holder/management positions. This provides for a well-balanced foundation to meet our goals and challenges. Our members are the backbone of our success and have made tremendous contributions in terms of both productivity and leadership. Training: Jiffy Lube offers a fantastic training program "Jiffy Lube University" a CBT (computer-based training) program designed to provide an investment in knowledge and skills to maintain the highest level of service. This is much like technical schools offer, but in addition to online training we also provide on-the-job training (hands-on) which provides for a more balanced skill set and "you'll earn while learn". Opportunity: Jiffy Lube offers growth and career opportunities for our j-team members that seek promotions and career advancement. Many of members who started as Courtesy Tech's have advanced to Lube Techs, Service Advisors, and Managers. We promote from within and provide the necessary training for j-team members to meet their career goals and objectives. Qualifications This is an entry level position and previous experience is preferred but will consider a strong candidate with some automotive background, customer service skills, or Vo-Tech training. Job Duties Include, but are not limited to • Greeting guests on arrival with a friendly smile and escorted to the lounge, • Driving the vehicle into the bay and checking dashboard and exterior lights, • Performing courtesies' vacuuming interior and cleaning exterior windows, • Checking and adjusting tire pressure to manufacturers recommendations, • Performing tire rotations and visually inspecting brake pads and rotors, • Perform clean up duties and ensure the service center is orderly and presentable Once you've become certified, you will be eligible for advancement opportunities to become a Lube Tech, Plus Tech/Mechanic, or Service Advisor. Core Qualities and Traits • Setting goals and objectives to meet and exceed all expectations, • Continually learning and developing skills to meet all challenges, • Building strong relationships, providing world class customer service, • and rolling up your sleeves and leading by example to motivate and inspire Physical Qualifications Courtesy Technicians must expect to stand for long periods of time on hard surfaces, like concrete or metal, and expect to work in an environment in which you may frequently experience hot and cold temperatures, loud noises, and exhaust fumes. Other physical qualifications • Must be able to lift and move work-related items up to 50 pounds, • Must be able to push, pull, lift, and bend at the knees and waist, twist body at the waist, raise and hold arms overhead, and turn head-neck-shoulders as needed Requirements • Excellent problem-solving and critical thinking skills, • Energetic, hardworking, and able to multi-task, • Show initiative, responsibility, and must be reliable, • Good interpersonal and communication skills, • Computer savvy to learn Jiffy Lubes' POS system, • Perform clean up duties and ensure the service center is orderly and presentable