Brake jobs in Rochester, New YorkCreate job alerts

Job Description Primary Responsibilities: • Complete comprehensive brake system repairs (rotors, pads, calipers, lines, and fluid flushes)., • Perform suspension and steering component replacements (shocks, struts, control arms, ball joints, tie rods)., • Handle drivetrain maintenance, wheel bearings, exhaust work, and tire mounting/balancing., • Conduct New York State (NYS) motor vehicle safety inspections., • Inspect vehicles for mechanical wear and clearly document parts needed for service advisors. What We Need From You: • 2+ years of professional automotive repair experience as a mechanical service tech or mechanic., • Active, valid NYS Inspector License., • Valid Driver’s License with an insurable, clean driving record., • Your own set of hand tools and impact/pneumatic equipment (shop specialty equipment provided)., • Strong work ethic, attention to detail, and a team-first mindset. What We Offer: • Stable Hourly Pay: Guaranteed hourly rate scaled to your mechanical experience ($24.00–$30.00/hr). No fighting over ticket dispatch or losing money during parts delays., • Predictable Lifestyle: Monday through Friday, 8:00 AM to 5:00 PM. Weekends and evenings are strictly off., • Equipped Workspace: Clean bays, modern hydraulic lifts, dedicated tire equipment, and heavy shop specialty tools provided.\nCompany Description Griff’s Auto Service has been a trusted, family-owned and operated repair shop for nearly 40 years. As an AAA-Approved Top Shop, we built our reputation on honest work, high customer satisfaction, and deep community trust. We treat our team like family, providing a clean, respectful, well-equipped shop without corporate micromanagement or flat-rate anxiety. Griff’s Auto Service has been a trusted, family-owned and operated repair shop for nearly 40 years. As an AAA-Approved Top Shop, we built our reputation on honest work, high customer satisfaction, and deep community trust. We treat our team like family, providing a clean, respectful, well-equipped shop without corporate micromanagement or flat-rate anxiety.

Job Description First Student is now hiring a Diesel Mechanic III in Rochester, NY serving Rochester City School, West Irondequoit and Brighton School District! Pay Rate: $38.67 Schedule: Monday-Friday 7:00am-4:00pm *$5,000 HIRING BONUS* If you take pride in keeping your community moving, this is your opportunity to make a real difference. Our team keeps students safe and on time every day-because behind every bus is a skilled mechanic who ensures reliability, safety, and peace of mind for families across our community. While First Student is North America's leading school transportation provider-serving more than 1,250 districts and 5.4 million student journeys daily-our focus is local. You'll join a close-knit team that values collaboration, safety, and community connection. Why Join First as a Diesel Mechanic? • Hourly Rate: $38.67 (NOT flat rate)., • Bonus rate increase $.25 for each ASE School Bus Series test passed and maintained (up to $2/hour more)., • Monday-Friday 7:00am-4:00pm day shift schedule with consistent, year-round work., • Company-paid ASE testing and training materials., • Company-paid CDL Class B training and licensing., • Excellent benefits package including medical, dental, vision, and 401(k) with company match., • Career Advancement Opportunities: Advance into operational, maintenance, management, and leadership roles in over 540 locations across the U.S. & Canada!, • Paid holidays and personal time off., • Annual allowances for boots and prescription safety glasses., • Discounts on cell phone plans, vehicles, and more through the PerkSpot program., • Employee Assistance Program (EAP): Counseling and support services for personal and work-related issues. About the Diesel Technician Position: As a Diesel Technician with First Student, you will help maintain and repair school buses to ensure safety and reliability. Diesel Technician key responsibilities include: • Ensure vehicles are maintained and safe for our passengers., • Diagnose and perform all phases of vehicle maintenance including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Perform preventive maintenance (PMs), safety inspections, and annual maintenance inspections., • Complete work orders accurately., • Assist with mobile emergency repair services when needed. Diesel Technician Qualifications: • At least 5 years of diesel or automotive maintenance and repair experience, or equivalent technical school education and experience., • Vehicle diagnostic and problem-solving skills., • Valid driver's license required., • CDL Class B or ability to obtain within 60 days of employment - Company paid training provided., • PA state inspection license or willingness to obtain., • Possession of a mechanic's tool set to complete all assigned duties., • Willingness to participate in the ASE certification program (training, testing, and bonuses provided)., • Strong computer skills., • Note: This position is subject to DOT drug testing as a safety-sensitive employee. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. Take the wheel and drive your career forward with First Student! Make an impact in your community while enjoying day shift schedules, great pay, and unmatched support. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description Overview The Lead Diesel Technician performs major mechanical repairs with minimal supervision to ensure proper performance and safety of vehicles and equipment; makes all repairs in a safe, cost effective and time efficient manner. The Lead Technician will prioritize, delegate, train and instruct other technicians to ensure repairs are being done in a safe manner and is responsible for active participation in the company’s progress with the career paths program and help technicians to move up in their careers. Hiring Range: $38-50 per hour Up to $10,000 Hiring Bonus Medical, Dental, Vision, Life & Disability Insurance, Flexible Spending Accounts, Discounted Stock Program, 401K, Boot & Clothing Allowance, Wellness Incentive, Tuition Assistance, and More. #INDSJ Responsibilities • Schedules, implements, and maintains a preventative Maintenance program for all vehicles and equipment at the division., • Directs, trains, and oversees technicians to ensure all jobs are done with safety as a top priority., • Ensures optimum performance and productivity in every vehicle, perform and/or direct the performance of adjustments, inspection or rebuild of all mechanical components and systems at the division., • Guarantees complete and accurate documentation of vehicle repair and maintenance history by establishing and maintaining Transman program for every vehicle., • Performs regular and ongoing operational analysis to maximize utilization of company resources and correct any deficiencies immediately., • Assures full DOT compliance for equipment maintenance., • Establishes and maintains a high level of professionalism throughout the maintenance facility., • Coordinates maintenance activities with associated departments to maximize customer satisfaction and efficient equipment usage., • Works with division manager to establish a personal development plan for technicians., • Demonstrates effective leadership skills by following all applicable federal, state and company policies, communicating clear goals, coaching team members on achieving goals, providing development opportunities to ensure employees attain the necessary skills to obtain results, organizing team initiatives., • Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Career Path Definitions & Distinctions Technician Apprentice: Demonstrates the ability to work alongside a knowledgeable Casella Waste Diesel Technician to learn and further develop skills. The Apprentice provides maintenance, repairs vehicles and equipment, and mainly focuses on preventative maintenance and maintaining the safety of all vehicles and equipment. Technician B: Demonstrates the ability to identify operating issues including examining, test driving and troubleshooting electrical and mechanical problems using standard testing procedures and computer diagnostic equipment. Technician also demonstrates the ability to correct any operating issues that are found. Technician A: Demonstrates the ability to inspect, troubleshoot, and repair vehicle brakes, suspension, steering, tires, rims, hubs, PTO, hydraulics, engine, cooling, starting, ignition, charging, lighting systems, fuel and air intake systems, heating, ventilation, and cooling systems to ensure vehicles are in safe and dependable operating condition. Master Technician: Demonstrates the ability to inspect, troubleshoot, and repair all vehicle and equipment systems. Can rebuild and replace engines, engine components, transmissions, drive line and rear-ends, mechanical systems, electrical systems, and hydraulic components. Qualifications The successful candidate will have a High School Diploma or GED, must be at least 18 years of age, hold a valid CDL Class B with an air brake endorsement, have an OSHA 10 or 30 card, have a 1-year clean CDL Driving experience, and must be legally eligible to work in the United States. Outstanding relationship management skills, excellent verbal and written communication skills, exceptional listening and problem-solving skills, and dedication to providing excellent customer service are desired. It is also important that the candidate has demonstrated the ability to work as part of a team in a collaborative environment as well as the ability to teach and train others. Ability to perform physically demanding tasks including frequent lifting of heavy components, pushing, pulling, crouching, climbing and consistent standing, walking and grasping. This job operators in both, garage/shop conditions, and outside of the shop which may include various weather conditions

Job Description Bus Technician / Mechanic I - (3rd Shift) Starting Pay: $33.17 per hour Top Rate Within 3 Years: $41.48 per hour AVAILABLE SHIFT: Sunday-Thursday, 11:00 pm-7:30 am (Friday and Saturday off) Union Representation: ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • RTS Pension Plan A monthly lifetime income that grows as you continue working at RTS. Your benefit is based on your years of credited service and the pension multiplier, and is not affected by investment gains or losses. • Excellent pay and union security – advance to $40.27/hour within 3 years, • Stable, consistent work – no flat rate; steady weekly pay, • Training provided – stay current with the latest technology, • Tool Allowance provided, • Strong benefits package – medical, dental, vision, tool and boot allowance, fitness center, and more, • Career growth – opportunities to move up and build a long-term career What You'll Do • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor, • Other duties as assigned What We're Looking For Education/Experience • Two (2) years in an accredited diesel mechanics program or comparable technical coursework OR • Equivalent, verifiable work experience (two years may substitute for one year of education), • Excellent Customer Service skills, including but not limited to the ability to clearly and effectively communicate with customers, are a must. Other Requirements • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical, • English proficiency required for safety, communication, and use of manuals/instructions PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION: Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTA will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result. RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Position Description Ryder is hiring aMid-LevelDiesel Technician in Rochester, New York — providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $30.50 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days, • Schedule: Tuesday–Saturday, • Hours: Second Shift Tuesday - Friday 2:00 pm – 10:30 pm, Saturday 8:00 am - 4:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. For More Info Call Michelle or Text "Rochester" to 904-541-9560 All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 month ago (9/29/2026 1:20 PM) Requisition ID 2026-211900 Location (Posting Location) : State/Province NY Location (Posting Location) : City ROCHESTER Location (Posting Location) : Postal Code 14623 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $30.50/Hr. Max Pay USD $30.50/Hr.

Position Description Ryder is hiring aMid-LevelDiesel Technician in Rochester, New York — providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $30.50 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days, • Schedule: Tuesday–Saturday, • Hours: Second Shift Tuesday - Friday 2:00 pm – 10:30 pm, Saturday 8:00 am - 4:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. For More Info Call Michelle or Text "Rochester" to 904-541-9560 All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 3 hours ago (11/13/2026 4:19 PM) Requisition ID 2026-215607 Location (Posting Location) : State/Province NY Location (Posting Location) : City ROCHESTER Location (Posting Location) : Postal Code 14623 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $30.50/Hr. Max Pay USD $30.50/Hr.

Position Description Ryder is hiring aMid-LevelDiesel Technician in Rochester, New York — providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $30.50 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days, • Schedule: Tuesday–Saturday, • Hours: Second Shift Tuesday - Friday 2:00 pm – 10:30 pm, Saturday 8:00 am - 4:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Call or text “Rochester” to904-869-3205to speak with a recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 2 weeks ago (10/14/2026 12:48 PM) Requisition ID 2026-213251 Location (Posting Location) : State/Province NY Location (Posting Location) : City ROCHESTER Location (Posting Location) : Postal Code 14623 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $29.50/Hr. Max Pay USD $29.50/Hr.

Job Description Job Title: Press Brake Operator Location: Rochester, NY Summary: Nesco Resource is seeking dependable and mechanically inclined Press Brake Operators to join a manufacturing team. This opportunity is ideal for candidates with experience operating metal fabrication equipment, a strong attention to detail, and the ability to produce quality parts according to specifications. Depending on experience, responsibilities may range from operating equipment with initial training to independently performing machine setups, changing tooling, troubleshooting jobs, and making routine adjustments. Candidates with strong blueprint-reading skills and the ability to work independently may qualify for higher pay. This role will be considered for temp-to-perm or direct hire, based on candidate's experience. Pay Rate: • $20.00 - $22.00/Hour: Entry-level or developing operators who can run equipment with training, • $23.00 - $26.00/Hour: Experienced operators who can read prints, check dimensions, change tooling, and make routine adjustments, • $27.00 - $30.00+/Hour: Highly skilled operators capable of performing setups, troubleshooting jobs, and working independently Shift: • Monday – Thursday | 6:00 AM – 4:30 PM, • Friday | 6:00 AM – 11:00 AM, • Currently running some overtime, • Optional Saturday overtime may be available Job Duties: • Operate press brake machinery to bend and form metal components according to job specifications, • Read and interpret blueprints, shop drawings, and technical work instructions, • Set up machines and select appropriate tooling based on production requirements, as applicable to experience level, • Load materials and position parts accurately for processing, • Change tooling and make machine adjustments to achieve required dimensions and bend angles, • Inspect finished parts using measuring tools to verify dimensional accuracy and quality, • Identify defects, dimensional inconsistencies, and production issues, • Troubleshoot machine or setup issues and make adjustments as needed, • Follow established production procedures, safety requirements, and quality standards, • Maintain accurate production records and communicate issues to supervisors, • Keep the work area clean, organized, and safe, • Meet production schedules while maintaining quality and accuracy Requirements: • Previous manufacturing or metal fabrication experience preferred, • Press brake operating experience preferred; training may be available for candidates with relevant mechanical aptitude, • Ability to read and interpret blueprints and shop drawings, particularly for experienced-level positions, • Familiarity with measuring tools such as calipers, micrometers, rulers, and protractors preferred, • Understanding of metal forming processes and dimensional tolerances preferred, • Ability to make routine machine adjustments and change tooling for experienced-level positions, • Strong mechanical aptitude and troubleshooting skills, • Excellent attention to detail and commitment to quality, • Ability to follow instructions and established safety procedures, • Dependable attendance and strong work ethic, • Ability to work independently or as part of a team Physical Requirements: • Ability to stand for extended periods throughout the shift, • Ability to lift, move, and position metal materials and finished parts as required, • Frequent use of hands for material handling and machine operation, • Ability to perform repetitive tasks while maintaining accuracy and productivity, • Ability to work safely around industrial machinery Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: Perform PM services on trailers, refrigeration units, trucks and APU units. General repairs on trucks - coolant system, fuel system, electrical system, drive train, brakes, suspension. Perform brake replacement on trucks and trailers. Trailer ABS brake system repairs. FHWA inspections on trailers. Perform body, structural, rear door and electrical repairs on trailers. Perform APU repairs and service. Meet standard repair times for jobs performed. Performs road service work. Service and repair of company vehicles. Operates company and customer vehicles, fork lifts, hoists and tools. Maintains a clean shop. Maintains confidentiality of all company information. Additional duties and responsibilities as assigned. Requirements: Valid NYS driver’s license required. NYS inspector’s license preferred but not required. Refrigeration experience preferred but not required. Regular, predictable, full attendance is an essential function of the job CDL License a plus EPA certification a plus Must have own tools

Job Description Job Purpose: Sets up and operates press brakes and other metal fabrication equipment to form, bend, and fabricate sheet metal components in accordance with blueprints, work orders, production specifications, and established ISO quality standards. This position ensures components meet dimensional and quality requirements while maintaining safe operating practices and supporting production schedules. Tasks and Responsibilities • Sets up and operates press brakes to bend and form sheet metal components according to blueprints, work orders, and production specifications., • Selects and installs appropriate tooling, dies, and punches based on material type, thickness, bend angle, and part requirements., • Reviews blueprints, drawings, and work instructions to determine proper dimensions, bend locations, angles, and tolerances., • Measures, marks, positions, and aligns sheet metal to ensure accurate and consistent forming., • Adjusts machine settings and verifies first-piece dimensions before proceeding with production., • Inspects completed parts using measuring tools and gauges to ensure compliance with established quality standards., • Operates other metal fabrication equipment, such as shears, rolls, drill presses, and related machinery, as trained and assigned., • Performs fabrication tasks, including cutting, bending, forming, and preparing metal components for assembly., • Identifies and reports defective parts, material discrepancies, equipment malfunctions, and quality concerns., • Maintains production records and completes required documentation in accordance with company procedures., • Handles sheet metal and fabricated components safely to prevent damage, injury, or product mix-ups., • Moves materials and finished components using forklifts, pallet jacks, hand trucks, or other approved equipment when trained and authorized., • Maintains tools, dies, gauges, and equipment in a clean, orderly, and safe condition., • Performs routine equipment inspections and operator-level maintenance as trained and authorized., • Follows all established safety procedures, machine guarding requirements, and personal protective equipment (PPE) guidelines., • Notifies management of equipment malfunctions, major repairs, material shortages, or production delays., • Maintains a clean and organized work area in accordance with company housekeeping and 5S standards., • Performs other duties as assigned. Experience Required: Two to four years of related manufacturing or metal fabrication experience and/or training preferred. Experience operating press brakes and reading and interpreting blueprints is preferred. A and B shift opportunities

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product introduction (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Press Brake Operator PRIMARY FUNCTION: The Press Brake Operator is responsible for the set-up, adjustment, and operation of our press brake machines to perform a wide variety of prototype jobs, short run parts, and long run parts. The operator will need to inspect parts and make adjustments to ensure adherence to quality standards. May also be asked to help in other areas such as: machining, pemming, laser/deburring. ESSENTIAL FUNCTIONS: • Set up, run, and adjust machines to ensure quality parts, • Read blueprints and apply knowledge of GD&T principles., • Works independently and with team members to help get difficult jobs done., • Able to float and help in different sheet metal departments as needed. Reports To: Sheet Metal Supervisor Basic Qualifications: • 2+ years of press brake experience, • High school diploma or equivalent, • Attention to detailPreferred Qualifications:, • Knowledge of Amada-type machines a plus, • Panel bender and slip roll knowledge a plusWork Authorization:, • US Persons, • Must be able to work in the United States without corporate sponsorship now and in the futurePEKO Perks:, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: Agility We are committed to maintaining a financially prudent and adaptable organization, ready to meet evolving challenges with confidence. Compassion We care deeply for our talented and loyal PEKO family, fostering a supportive and inclusive workplace culture. Endurance We believe in the resilience of our people—problem solvers who shape the future through perseverance and innovation. Integrity We uphold transparency, honesty, and respect in all interactions with employees, customers, and stakeholders. Safety We prioritize a safe, clean, and positive work environment where every team member can thrive. Salary Range: A reasonable estimate of the compensation range for this position is $24-$35/hour. The wage range for this role considers a wide range of factors when making compensation decisions, including skill sets, experience and training, licensure and certifications, as well as other business and organizational requirements. Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities are subject to change at any time, with or without notice., • Project a positive and professional image of the company and of management to employees at all levels. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube https://youtu.be/dDT1Cp908ns PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR CTvLGoTeB6

Job DescriptionDescription: The Senior Machinist/Fabricator is expected to operate with a high degree of independence and technical ownership. This person should be capable of receiving a drawing or manufacturing requirement, evaluating how the component should be produced, selecting the appropriate equipment and tooling, completing the work, inspecting the finished component, and resolving routine manufacturing issues without continuous supervision. JOB DUTIES & RESPONSIBILITIES • Set up, program, and operate CNC and manual machine tools to manufacture precision components from engineering drawings, CAD models, sketches, and specifications., • Independently determine machining sequences, tooling, workholding, speeds, feeds, and appropriate manufacturing methods., • Machine parts to specified dimensions and tolerances using CNC mills, CNC lathes, manual mills, manual lathes, grinders, saws, and related equipment., • Perform fabrication operations including cutting, forming, drilling, grinding, fitting, and assembly of fabricated components., • Perform MIG and TIG welding when required and prepare components for welding and final assembly., • Calculate dimensions, tolerances, offsets, and machining requirements., • Inspect completed components using micrometers, calipers, indicators, gauges, and other precision measuring equipment., • Troubleshoot machining, tooling, equipment, fabrication, and dimensional problems and implement practical corrective actions., • Modify or repair existing components and equipment when replacement parts are unavailable or impractical., • Support prototype and one-off component manufacturing common to custom automation projects., • Coordinate with Engineering, Project Management, Assembly, and other shop personnel to resolve manufacturing questions and maintain project schedules., • Work overtime as required to support project and customer schedules., • Travel between Adaptec Solutions' Rochester and Painted Post facilities when business needs require. EDUCATION AND EXPERIENCE • High school diploma or GED, required. Technical or vocational education in machining, CNC technology, manufacturing, welding, mechanical technology, or a related discipline, preferred., • 5+ years of progressively responsible machining and/or metal fabrication experience. Requirements: • Demonstrated experience programming, setting up and operating CNC machining equipment., • Experience with manual mills, lathes, and common fabrication equipment., • Strong understanding of machining principles, tooling, workholding, materials, feeds and speeds, and manufacturing tolerances., • Ability to independently read and interpret engineering drawings, GD&T information, technical specifications, and manufacturing documentation., • Proficiency using precision measuring instruments including micrometers, calipers, indicators, and gauges., • Fabrication Equipment: AccuPress Hydraulic Press Brake, AccurShear Hydraulic Shear, Piranha Ironworker, horizontal and vertical bandsaws, drill presses, grinders, and belt sanders. PHYSICAL REQUIREMENTS The position requires the ability to occasionally exert up to 40 pounds of force and requires close visual and mental attention when controlling machinery and manufacturing processes. WHAT SUCCESS LOOKS LIKE A successful Senior Machinist/Fabricator consistently produces safe, accurate, high-quality work while minimizing scrap, rework, and unnecessary machine time. The individual becomes a trusted shop resource for difficult machining and fabrication problems and helps bridge the practical manufacturing relationship between Engineering and Operations. Within the first year, this person should demonstrate the ability to independently take complex parts from drawing through setup/programming, machining/fabrication, inspection, and completed component while also raising the technical capability of the surrounding shop team. In compliance with pay transparency requirements, the wage range for this role is $32.00 - $37.00 an hour. The rate range provided is a general guideline. When extending an offer, Adaptec Solutions considers factors including but not limited to experience and geographic location. Adaptec Solutions also offers a variety of benefits including generous paid time off (PTO), 11 paid company holidays including your birthday, generous health plans, dental and vision insurance, HSA/FSA accounts, generous 401(k) match and immediate vesting, short-term/long term disability coverage and basic life/AD&D insurance and education assistance. Adaptec Solutions, LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Job Type Full-time Description The Senior Machinist/Fabricator is expected to operate with a high degree of independence and technical ownership. This person should be capable of receiving a drawing or manufacturing requirement, evaluating how the component should be produced, selecting the appropriate equipment and tooling, completing the work, inspecting the finished component, and resolving routine manufacturing issues without continuous supervision. JOB DUTIES & RESPONSIBILITIES • Set up, program, and operate CNC and manual machine tools to manufacture precision components from engineering drawings, CAD models, sketches, and specifications., • Independently determine machining sequences, tooling, workholding, speeds, feeds, and appropriate manufacturing methods., • Machine parts to specified dimensions and tolerances using CNC mills, CNC lathes, manual mills, manual lathes, grinders, saws, and related equipment., • Perform fabrication operations including cutting, forming, drilling, grinding, fitting, and assembly of fabricated components., • Perform MIG and TIG welding when required and prepare components for welding and final assembly., • Calculate dimensions, tolerances, offsets, and machining requirements., • Inspect completed components using micrometers, calipers, indicators, gauges, and other precision measuring equipment., • Verify manufactured components conform to engineering drawings, specifications, tolerances, and quality requirements., • Identify drawing, tolerance, manufacturability, or material issues before they result in scrap, rework, or schedule impact., • Troubleshoot machining, tooling, equipment, fabrication, and dimensional problems and implement practical corrective actions., • Modify or repair existing components and equipment when replacement parts are unavailable or impractical., • Support prototype and one-off component manufacturing common to custom automation projects., • Coordinate with Engineering, Project Management, Assembly, and other shop personnel to resolve manufacturing questions and maintain project schedules., • Provide manufacturability feedback to Engineering when alternative machining or fabrication methods could improve quality, lead time, or cost., • Maintain organized tooling, fixtures, work areas, and machining equipment., • Perform routine equipment inspections and identify maintenance or repair requirements., • Follow company safety procedures and appropriate machine guarding, PPE, lockout/tagout, and safe-work practices., • Assist with training and technical development of junior machinists, fabricators, technicians, and other shop personnel., • Support shop workload priorities and assist leadership in determining efficient approaches for complex machining or fabrication work., • Work overtime as required to support project and customer schedules., • Travel between Adaptec Solutions' Rochester and Painted Post facilities when business needs require. EQUIPMENT & MANUFACTURING CAPABILITIES The Senior Machinist/Fabricator may operate and/or support equipment including: Candidates are not necessarily expected to be experts on every listed machine, but should have sufficient machining and fabrication experience to become proficient across Adaptec's equipment. EDUCATION AND EXPERIENCE • High school diploma or GED, required. Technical or vocational education in machining, CNC technology, manufacturing, welding, mechanical technology, or a related discipline, preferred., • 5+ years of progressively responsible machining and/or metal fabrication experience. Requirements • Demonstrated experience programming, setting up and operating CNC machining equipment., • Experience with manual mills, lathes, and common fabrication equipment., • Strong understanding of machining principles, tooling, workholding, materials, feeds and speeds, and manufacturing tolerances., • Ability to independently read and interpret engineering drawings, GD&T information, technical specifications, and manufacturing documentation., • Proficiency using precision measuring instruments including micrometers, calipers, indicators, and gauges., • Strong mechanical aptitude and troubleshooting ability., • Ability to perform mathematical calculations associated with machining, layout, tolerances, and fabrication., • Ability to manage multiple priorities while maintaining quality and schedule commitments., • Strong attention to detail and critical thinking., • Ability to work effectively both independently and as part of a cross-functional team., • Ability to communicate technical issues clearly with Engineering, Operations, Project Management, and other shop personnel., • Manual Machining: Manual mills, manual lathes, surface grinders, and associated tooling and inspection equipment., • MIG and TIG welding experience (Level: intermediate), • OMAX waterjet experience. (Level: intermediate?expert), • CAD/CAM software experience. (Level: intermediate?expert), • HAAS CNC and/or Fanuc CNC experience. (Level: intermediate?expert), • CNC Equipment: Fanuc Robodrill OX-D2, HAAS ST-20 CNC Lathe, HAAS VF-4 Vertical Machining Center, and OMAX Waterjet., • Fabrication Equipment: AccuPress Hydraulic Press Brake, AccurShear Hydraulic Shear, Piranha Ironworker, horizontal and vertical bandsaws, drill presses, grinders, and belt sanders. SENIOR-LEVEL EXPECTATIONS • Serve as a technical resource and mentor for other shop personnel., • Help establish machining and fabrication best practices., • Recognize manufacturability problems before production begins., • Reduce scrap and rework through proper planning and inspection., • Assist with complex or high-risk components., • Support continuous improvement of machining and fabrication processes., • Help develop tooling, fixtures, setups, and repeatable manufacturing methods., • Demonstrate a strong sense of urgency while maintaining safety and quality., • Escalate technical, quality, material, or schedule risks to leadership early., • Take ownership of work from initial assignment through completed and inspected component. PHYSICAL REQUIREMENTS The employee must be able to perform the physical activities associated with machining and fabrication, including standing, walking, bending, reaching, kneeling, climbing, handling tools and materials, and performing repetitive hand and wrist movements. The position requires the ability to occasionally exert up to 40 pounds of force and requires close visual and mental attention when controlling machinery and manufacturing processes. WHAT SUCCESS LOOKS LIKE A successful Senior Machinist/Fabricator consistently produces safe, accurate, high-quality work while minimizing scrap, rework, and unnecessary machine time. The individual becomes a trusted shop resource for difficult machining and fabrication problems and helps bridge the practical manufacturing relationship between Engineering and Operations. Within the first year, this person should demonstrate the ability to independently take complex parts from drawing through setup/programming, machining/fabrication, inspection, and completed component while also raising the technical capability of the surrounding shop team.

\n CNC Programmer \n \n \n Our client is a well-established, third-generation family-owned precision sheet metal fabrication and contract manufacturing company with decades of industry experience and approximately 180 employees. The organization operates a highly integrated manufacturing environment supporting customers across industries including telecommunications, electronics, medical, transportation, automotive, and office equipment. With more than 200,000 square feet of manufacturing space, the company provides services spanning design for manufacturing, tooling, sheet metal fabrication, stamping, machining, robotic welding, assembly, finishing, and high-volume production. This is a collaborative, values-driven organization that emphasizes quality, teamwork, accountability, and an internal customer-service mindset. The position is onsite on 1st shift at the company's Rochester-area facility, with occasional flexibility to support operations during an upcoming facility consolidation. \n \n \n About the Role \n \n \n The CNC Blanking Programmer will support the programming and production of precision sheet metal components, working closely with the manufacturing floor to ensure programs are accurate, efficient, and production-ready. \n \n \n Responsibilities \n \n \n\n • Program multiple types of CNC equipment, including press brakes, laser turrets, and blanking equipment\n, • Build and optimize nests using customer-supplied models, drawings, and prints\n, • Utilize SolidWorks and CNC programming software to develop production-ready programs\n, • Work with Amada VPSS 4iE Blank for blanking and nesting applications\n, • Support press brake programming and other sheet metal programming requirements\n, • Respond to shop-floor programming questions and assist with setup-related issues\n, • Close Non-Conformance Material Reports (NCMRs) and address pre-production review action items\n, • Review customer models and prints to ensure manufacturability and programming accuracy\n, • Collaborate with engineering, production, and other internal teams to resolve manufacturing issues\n, • Help identify opportunities to improve programming efficiency, material utilization, and production processes\n, • Support the manufacturing team during the company's planned facility transition as needed\n\n \n \n Qualifications \n \n \n\n • The ideal candidate will have hands-on CNC programming experience within a sheet metal fabrication environment, along with strong CAD skills and the ability to work collaboratively with production personnel.\n\n \n \n Required Skills \n \n \n\n • Previous CNC programming experience is required\n, • SolidWorks experience is required\n, • Sheet metal fabrication experience is required; machining-only CNC experience will not meet the requirements\n, • Experience programming CNC blanking, laser, press brake, or similar sheet metal equipment\n, • Experience working from customer drawings, models, and prints\n, • Strong understanding of sheet metal fabrication and manufacturing processes\n, • Amada VPSS 4iE Blank experience is strongly preferred\n, • Experience with Dr. Abe Bend is highly preferred\n, • Radan experience is highly preferred\n, • Press brake programming experience is a plus\n, • Plex experience is a plus\n, • Strong attention to detail and commitment to quality\n, • Ability to troubleshoot programming and production issues\n, • Strong communication and collaboration skills\n, • Stable employment history and demonstrated commitment to previous employers\n\n \n \n

Job Description COMFORT WINDOWS & DOORS is looking to immediately hire carpenters who have proven experience constructing decks, enclosures, and/or sunrooms. At Comfort Windows & Doors we offer: • Full-time, year-round work, • Industry competitive pay rates based on experience, including 1.5x overtime pay, • Incentive and bonus opportunities, • Annual pay increases, • Health, dental, and vision coverage plans, • FREE $10,000 life insurance policy, • 401K plan with a dollar-for-dollar company match up to 4%, • Generous number of paid days off for holidays, vacation, and sick time, • Promotions from within for great career advancement If your experience includes: • Home remodeling/renovation, • Metal brake usage, • Working on ladders/scaffolding, • Safe usage of power tools, • General carpentry skills, • Willingness to work in all kinds of weather conditions DON'T WAIT...APPLY NOW! * As we have a wide variety of positions, the above listed pay range encompasses all skills and experience levels. Specific pay rates will be decided upon completion of the interview process and determination of job level to be offered. Comfort Windows is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description Master Electrician Reports To: Manager of Buildings & Grounds Salary Range: $41.48 per hour Schedule: Monday – Friday, 6:00 a.m. – 2:30 p.m. Make an Impact at RTS At Regional Transit Service (RTS), we connect our community to the people, places, and opportunities that matter most. With more than 1,000 employees serving eight counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders each year. As a Master Electrician, you'll play a critical role in maintaining the electrical infrastructure that supports RTS operations. From electrical distribution systems to facility improvements and general building maintenance, your expertise helps ensure our facilities remain safe, reliable, and efficient for employees and the communities we serve. Why Join RTS? Staying Healthy • Medical, Dental & Vision Insurance, • Flexible Spending Account (FSA) Feeling Secure • RTS Pension Plan, • NYS Deferred Compensation Plan, • Life, Disability & Supplemental Insurance Work-Life Balance • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • 24/7 Fitness Center, • Wellness Program, • Culture & Inclusion Council, • Public Service Loan Forgiveness (PSLF), • Employee Discounts & More Career & Professional Growth • Competitive hourly pay, • Stable, consistent work with weekly pay, • Tool and boot allowance, • Ongoing technical training and professional development, • Opportunities for career advancement, • Collaborative team environment with modern tools and equipment About the Role The Master Electrician is responsible for maintaining, repairing, and installing electrical distribution systems and associated electrical equipment throughout RTS facilities. This position also performs a variety of building maintenance and repair tasks, supporting the upkeep of transit facilities through work in electrical systems as well as general building trades including carpentry, plumbing, masonry, concrete finishing, and remodeling projects. What You'll Do • Install, maintain, troubleshoot, and repair electrical distribution systems and equipment., • Connect wiring to circuit breakers, transformers, motors, and other electrical components., • Inspect electrical systems and equipment to identify hazards, code violations, and repair needs., • Test electrical systems using meters, oscilloscopes, and other diagnostic equipment., • Plan electrical installations based on project specifications and applicable electrical codes., • Read and interpret blueprints, schematics, and technical drawings., • Install conduit, wiring, electrical fixtures, switches, outlets, and related equipment., • Repair or replace electrical wiring, fixtures, and electrical components., • Work from ladders, scaffolding, lifts, and rooftops when required., • Perform physically demanding work, including trenching, lifting, and moving materials., • Perform general building maintenance including carpentry, plumbing, masonry, concrete repair, and remodeling projects., • Advise management regarding electrical safety concerns and equipment reliability., • Perform other duties as assigned. What We're Looking For Required Qualifications • High school diploma or equivalent (GED)., • Current Master Electrician (Three-Phase) license issued by the City of Rochester Electrical Examining Board., • Valid New York State driver's license with a satisfactory driving record., • Must possess a complete set of tools necessary to perform assigned work., • Must obtain a New York State CDL Class B permit with passenger and air brake endorsements prior to employment., • Ability to lift up to 75 pounds., • Strong verbal and written communication skills. Preferred Qualifications • Experience maintaining commercial, industrial, or municipal electrical systems., • Experience performing general building maintenance and repairs., • Experience working in a transportation, manufacturing, or industrial environment., • Experience using computerized maintenance management systems (CMMS), including Trapeze EAM. Knowledge, Skills & Abilities • Thorough knowledge of electrical installation, maintenance, troubleshooting, and repair., • Ability to diagnose electrical system failures using testing equipment and hand tools., • Knowledge of applicable electrical codes and safety regulations., • Ability to read and interpret blueprints, schematics, and technical documentation., • Proficiency with Microsoft Office applications and computerized maintenance systems., • Strong organizational and time management skills., • Ability to prioritize multiple assignments while maintaining quality workmanship., • Excellent communication and interpersonal skills., • Commitment to workplace safety and continuous improvement. Working Conditions & Physical Requirements The physical demands described are representative of those required to successfully perform the essential functions of this position. Reasonable accommodations may be made for qualified individuals with disabilities. • Frequently required to stand, walk, reach, use hands, talk, and hear., • Occasionally required to sit, climb, balance, stoop, kneel, crouch, or crawl., • Frequently lift or move up to 20 pounds., • Occasionally lift or move up to 75 pounds., • Must possess close, distance, color, peripheral, and depth vision with the ability to adjust focus., • Regularly works around moving mechanical equipment., • Frequently works outdoors and in varying weather conditions., • Occasionally exposed to wet or humid conditions, fumes, airborne particles, vibration, and hazardous materials., • Work environment includes moderate to loud noise levels. Additional Information RGRTA maintains a zero-tolerance drug and alcohol policy in accordance with Department of Transportation (DOT) and Federal Transit Administration (FTA) regulations. All applicants for this safety-sensitive position must successfully complete a pre-employment drug screening and will be subject to ongoing drug and alcohol testing throughout employment as required by law. Equal Employment Opportunity RGRTA is committed to providing equal employment opportunities to all applicants and employees without regard to race, religion, color, national origin, citizenship or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable law. Reasonable accommodations will be provided for qualified individuals with disabilities unless doing so would create an undue hardship.

Job DescriptionAccess Bus Washer Reports To: Operations/Maintenance Supervisor (or designated supervisor) Salary Range: $19.67 per hour (Union Position) Current Schedule: Saturday–Wednesday, 4:00 PM–12:00 AM (Thursday and Friday off) Work Location: 588 Trabold Road, Rochester, NY 14624 Union Status: Amalgamated Transit Union (ATU), Local 282 ---------------------------------------------------------------------- Make an Impact at RTS At RTS, we connect our community to the people, places, and opportunities that matter most. As a Bus Washer with RTS Access, you play a vital role in ensuring our paratransit fleet is clean, safe, fueled, and ready to provide reliable transportation for customers with disabilities. Your work directly supports customer health, safety, and satisfaction while helping RTS deliver dependable service every day. ---------------------------------------------------------------------- Why Join RTS? Staying Healthy • Medical, Dental & Vision Insurance, • Health Reimbursement Account (HRA) Feeling Secure • Pension Plan, • NYS Deferred Compensation Plan, • Life, Disability & Supplemental Insurance, • Accidental Death & Dismemberment (AD&D) Insurance, • Accident Insurance, • Group Specified Disease Insurance, • Hospital InsuranceWork-Life Balance, • Paid Time Off (PTO), • Paid Holidays, • Employee Assistance Program, • Employee Wellness Program, • Wellness Center / 24/7 Fitness Center, • Public Service Loan Forgiveness (PSLF), • Employee Discounts (including BJ's Wholesale Club), • Culture & Inclusion Council ---------------------------------------------------------------------- About the Role The Bus Washer is responsible for maintaining the cleanliness, appearance, and readiness of RTS Access transit buses. This position ensures buses are cleaned, fueled, and positioned for daily service while contributing to a safe, efficient, and customer-focused transportation operation. This is a physically demanding position requiring employees to work outdoors and in varying weather conditions. ---------------------------------------------------------------------- What You'll Do • Clean and wash the interior and exterior of transit buses., • Fuel buses according to established procedures., • Park, move, and position buses for daily service., • Maintain cleanliness standards that support customer health and safety., • Operate cleaning equipment, power tools, and hand tools safely., • Follow all safety procedures and operational guidelines., • Work collaboratively with team members to ensure fleet readiness., • Report equipment issues or vehicle damage to appropriate personnel., • Maintain a dependable attendance record and arrive to work on time. ---------------------------------------------------------------------- What We're Looking For Required Qualifications • Valid New York State Driver's License., • Ability to obtain a Class B Commercial Learner's Permit with Passenger Endorsement and no air brake restriction prior to start date., • Clean driving record., • Ability to work effectively in a team environment., • Strong communication skills., • Dependable, punctual, and honest., • Ability to follow written and verbal instructions.Preferred Qualifications, • Previous vehicle washing, detailing, janitorial, or fleet maintenance experience., • Experience working in transportation, automotive, or industrial environments., • Commercial driving experience (helpful but not required). ---------------------------------------------------------------------- Knowledge, Skills & Abilities • Strong attention to detail., • Ability to work efficiently in a fast-paced environment., • Safe operation of cleaning equipment and tools., • Effective verbal communication skills., • Teamwork and collaboration., • Reliability and accountability., • Commitment to workplace safety., • Ability to adapt to changing operational needs. ---------------------------------------------------------------------- Physical Demands & Work Environment • Work is performed primarily outdoors in all weather conditions, including extreme heat and cold., • Work in noisy environments around moving buses and heavy equipment., • Ability to hear approaching vehicles, horns, alarms, and verbal communication without direct line of sight., • Work in dark, dimly lit, confined, wet, and slippery environments., • Perform repetitive bending, stooping, squatting, kneeling, crouching, stretching, and overhead reaching., • Stand and walk for extended periods on hard or uneven surfaces., • Move quickly throughout buses and work areas., • Lift and carry up to 50 pounds., • Use power tools, hand tools, and cleaning equipment safely., • Maintain productivity while performing physically demanding tasks. Pre-Employment Requirements: • Successful completion of a DOT/FTA-required pre-employment drug test., • Compliance with RGRTA's zero-tolerance drug and alcohol policy throughout employment., • Ability to meet all applicable DOT and FTA safety-sensitive position requirements. ---------------------------------------------------------------------- Equal Employment Opportunity Rochester Genesee Regional Transportation Authority (RGRTA) is committed to providing equal employment opportunities to all applicants and employees without regard to race, color, religion, national origin, citizenship or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic protected by applicable federal, state, or local law. RGRTA will provide reasonable accommodations to qualified applicants and employees with known disabilities unless doing so would impose an undue hardship on the operation of the organization. For safety-sensitive positions, RGRTA maintains a drug- and alcohol-free workplace in accordance with Department of Transportation (DOT) and Federal Transit Administration (FTA) regulations. Applicants for safety-sensitive positions must successfully complete a pre-employment drug test and receive a verified negative test result before performing safety-sensitive functions. Employees in these positions are also subject to additional drug and alcohol testing throughout their employment as required by applicable regulations. As required by law, RTS tests for a variety of substances, including cocaine, amphetamines, opioids, phencyclidine (PCP), and marijuana metabolites. Please be aware that marijuana can remain detectable in the body for an extended period of time—sometimes more than 30 days—and may result in a positive drug test long after use.

Job DescriptionBenefits:NO WEEKENDS – Monday to Friday work schedule • Health Insurance, • 401K, • Paid time off, • Paid holidays, • Paid vacation, • Paid training, • Employee discountSchedule:, • Monday to Friday, • No weekends (EVER)Ability to commute/relocate:, • Auburn, NY 13021: Reliably commute or planning to relocate before starting work (Required)Work Location: In personJob Type: Full-timePay: Up to $100,000.00 per yearExpected hours: Work 40 hours , our technicians produce an average of over 50 flat rate hoursExperience in Automotive electrical systems (Required)Work Location: In personSupplemental Pay:, • Bonus opportunities, • Commission payFull job descriptionJob descriptionAUTOMOTIVE MECHANICUp to $100,000 A YEAR (*based on experience) Local FAMILY OWNED independent repair shop has an opening for a motivated mechanic at our clean, family-owned, independent repair shop in Auburn, NY. We pride ourselves on providing the highest-quality repairs and customer service at fair, honest prices.WE WILL OFFER TOP PAY, AND AN INCENTIVE , PRODUCTION-BASED PAY PLAN FOR THE RIGHT CANDIDATEQualifications: • Proven experience as an Automotive Technician with at least 3 years of on-the-job experience, • In-depth knowledge of automotive repair techniques and procedures., • Proficiency in diagnosing and repairing automotive electrical systems., • Strong problem-solving skills and attention to detail., • Ability to lift heavy objects and perform physically demanding tasks., • Excellent communication skills and the ability to work well in a team., • Willingness to operate in a very close-knit, team-based shopResponsibilities:, • Repair brake and steering systems., • Diagnose and repair electrical and electronic systems., • Replace or repair transmissions and internal engine repairs as needed., • Repair cooling system components and systems, including air conditioners and engine cooling., • Perform NY State safety and emissions inspections., • Conduct routine maintenance work (replacing fluids, lubricating parts, rotating tires, etc.)., • Produce legible and accurate paperwork reflecting diagnosis and work performed, • Experience in diagnosing check engine light concerns, • Experience with Air Conditioning systems and familiar with evacuation equipment, • Must have own tools, shop does provide a large amount of shop toolsNote: This job description is intended to provide a general overview of the position. Duties, responsibilities, and qualifications may be subject to change based on the needs of the Company.License/Certification(s):, • Valid New York Driver's License (required), • NYS Motor Vehicle Inspector License (required)Job Type: Full-timeCompensation: Up to $100,000 PLUS per year (*based on experience). FLAT RATE pay with monthly and weekly commission based on productionProduction and Performance pay structure, make your own paycheck! People with a criminal record are encouraged to apply #hc223438

Job Description Job description AUTOMOTIVE MECHANIC Up to $100,000 A YEAR (*based on experience) Benefits: NO WEEKENDS – Monday to Friday work schedule • Health Insurance, • 401K, • Paid time off, • Paid holidays, • Paid vacation, • Paid training, • Employee discount Local FAMILY OWNED independent repair shop has an opening for a motivated mechanic at our clean, family-owned, independent repair shop in Auburn, NY. We pride ourselves on providing the highest-quality repairs and customer service at fair, honest prices. WE WILL OFFER TOP PAY, AND AN INCENTIVE , PRODUCTION-BASED PAY PLAN FOR THE RIGHT CANDIDATE Qualifications: · Proven experience as an Automotive Technician with at least 3 years of on-the-job experience · In-depth knowledge of automotive repair techniques and procedures. · Proficiency in diagnosing and repairing automotive electrical systems. · Strong problem-solving skills and attention to detail. · Ability to lift heavy objects and perform physically demanding tasks. · Excellent communication skills and the ability to work well in a team. • Willingness to operate in a very close-knit, team-based shop Responsibilities: • Repair brake and steering systems., • Diagnose and repair electrical and electronic systems., • Replace or repair transmissions and internal engine repairs as needed., • Repair cooling system components and systems, including air conditioners and engine cooling., • Perform NY State safety and emissions inspections., • Conduct routine maintenance work (replacing fluids, lubricating parts, rotating tires, etc.)., • Produce legible and accurate paperwork reflecting diagnosis and work performed, • Experience in diagnosing check engine light concerns, • Experience with Air Conditioning systems and familiar with evacuation equipment, • Must have own tools, shop does provide a large amount of shop tools Note: This job description is intended to provide a general overview of the position. Duties, responsibilities, and qualifications may be subject to change based on the needs of the Company. License/Certification(s): • Valid New York Driver's License (required), • NYS Motor Vehicle Inspector License (required) Job Type: Full-time Compensation: Up to $100,000 PLUS per year (*based on experience). FLAT RATE pay with monthly and weekly commission based on production Production and Performance pay structure, make your own paycheck! Benefits: • Employee discount, • On-the-job training, • Paid training, • Professional development assistance Schedule: • Monday to Friday, • No weekends (EVER) Ability to commute/relocate: • Auburn, NY 13021: Reliably commute or planning to relocate before starting work (Required) Work Location: In person Job Type: Full-time Pay: Up to $100,000.00 per year Expected hours: Work 40 hours , our technicians produce an average of over 50 flat rate hours Experience in Automotive electrical systems (Required) Work Location: In person Supplemental Pay: • Bonus opportunities, • Commission pay People with a criminal record are encouraged to apply #hc222721

Suburban Propane - - Responsibilities: Assist with installation, maintenance, troubleshooting and repair of propane and/or heating oil systems and appliances; Complete online training modules on safety, hazmat, and security; Obtain CDL with hazmat, tanker, and air brake endorsements; Assist with de

Job Description Technician I, Garage Days – Alignments Reports To: Fleet Maintenance Supervisor Salary Range: Starting Pay: $33.17 per hour | Top Rate Within 3 Years: $41.48 per hour Schedule: 7:00 a.m. – 3:30 p.m., Monday, Thursday–Sunday Days Off: Tuesday & Wednesday Union Representation: ATU Local 282 Make an Impact at RTS At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees serving eight counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders each year. As a Technician I, Garage Days – Alignments, you'll play a vital role in maintaining the safety and reliability of our fleet by performing alignments, repairs, inspections, and preventive maintenance on buses and support vehicles. Why Join RTS? Staying Healthy • Medical, Dental & Vision Insurance, • Flexible Spending Account (FSA) Feeling Secure • RTS Pension Plan, • NYS Deferred Compensation Plan, • Life, Disability & Supplemental Insurance, • Union representation through ATU Local 282 Work-Life Balance • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • 24/7 Fitness Center, • Wellness Program, • Culture & Inclusion Council, • Public Service Loan Forgiveness (PSLF), • Employee Discounts & More Career & Professional Growth • Advance to top pay of $41.48/hour within 3 years, • Stable, consistent work with weekly pay, • Paid training on current vehicle technologies, • Tool allowance and boot allowance, • Opportunities for advancement within Fleet Maintenance About the Role The Technician I, Garage Days – Alignments position is responsible for performing front-wheel alignments, preventive maintenance, diagnostics, repairs, and overhauls on RTS buses and fleet vehicles. This role ensures vehicles remain safe, reliable, and available for daily service while supporting overall fleet maintenance operations. What You'll Do • Perform front-wheel alignments to maximize tire life on articulated buses, 40-foot buses, and non-revenue vehicles., • Maintain, repair, and overhaul RTS buses and fleet vehicles., • Perform inspections, diagnostics, and preventive maintenance., • Replace, adjust, and repair mechanical components., • Complete required test drives following repairs., • Operate diagnostic software and equipment, including Cummins InSite and Allison diagnostic systems., • Perform welding, brazing, and cutting torch work as required., • Operate tow trucks and respond to road calls when assigned., • Perform articulated bus repairs and overhauls., • Complete ramp and battery preventive maintenance inspections and repairs., • Report safety concerns, equipment defects, and maintenance issues to supervisors., • Maintain accurate maintenance documentation., • Perform other duties as assigned. What We're Looking For Required Qualifications • Two (2) years in an accredited diesel mechanics program or comparable technical coursework; OR • Equivalent verifiable work experience (two years of work experience may substitute for one year of education)., • Excellent customer service and communication skills., • Must provide own tools., • Must obtain a New York State CDL Class B permit with passenger and air brake endorsements prior to employment., • Must obtain a CDL Class B license within 90 days of hire., • Must obtain a CDL Class A permit with towing endorsement (may be obtained after hire)., • Must obtain a CDL Class A license within 90 days of receiving the permit., • Must successfully complete a post-offer physical examination., • Must be able to read, write, and communicate effectively in English for safety, communication, and use of technical manuals. Preferred Qualifications • Experience performing heavy-duty vehicle alignments., • Experience maintaining transit buses or commercial diesel vehicles., • Experience using electronic diagnostic systems., • Welding and fabrication experience. Knowledge, Skills & Abilities • Knowledge of diesel engine repair and preventive maintenance practices., • Ability to perform accurate front-wheel alignments., • Knowledge of mechanical, hydraulic, electrical, and pneumatic systems., • Ability to diagnose and repair vehicle systems using computerized diagnostic equipment., • Ability to safely operate shop equipment and towing vehicles., • Strong troubleshooting and problem-solving skills., • Ability to work independently and as part of a team., • Strong verbal and written communication skills., • Commitment to workplace safety and quality workmanship. Working Conditions & Physical Requirements The physical demands described are representative of those required to successfully perform the essential functions of this position. Reasonable accommodations may be provided for qualified individuals with disabilities. • Frequently required to stand, walk, reach, use hands, talk, and hear., • Occasionally required to sit, climb, balance, stoop, kneel, crouch, or crawl., • Frequently lift or move up to 20 pounds., • Occasionally lift or move up to 75 pounds., • Must possess close, distance, color, peripheral, and depth vision with the ability to adjust focus., • Regularly works around moving mechanical equipment., • Frequently works outdoors in varying weather conditions., • Occasionally exposed to wet or humid environments, fumes, airborne particles, vibration, and chemicals., • Work environment includes moderate to loud noise levels. Additional Information RGRTA maintains a zero-tolerance drug and alcohol policy in accordance with Department of Transportation (DOT) and Federal Transit Administration (FTA) regulations. All applicants for this safety-sensitive position must successfully complete a pre-employment drug screening and will be subject to ongoing drug and alcohol testing throughout employment as required by law. Equal Employment Opportunity Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTA will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business.

Job Description Position:Manufacturing Floater Reports to:Plant Manager & Facility Group Leader Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description Under the direction of the Plant Supervisor, floats between manufacturing departments depending on where the biggest need are at the time. May perform duties for rework, in Welding, CNC, Punch Press, Brake Press, Laser, Turret, Finishing/Grinding, Shipping and Receiving, and Assembly. Minimum Qualifications: -Have the ability to constantly lift and/or move 1-50 pounds -Knowledge of how to read and understand blueprints preferred -Knowledge of the metric system preferred -Complete and maintain all required paperwork, records, documentation, etc. -Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards Specific Duties: 1.Safely operates machinery in various departments to help meet production goals. 2.Operates machinery in various departments to help meet production goals, including Machine Operator, Assembly, Spot Welding & Grinding 3.Works with Plant Manager to determine where he/she should work that day 4.Meet quality and performance measures in accordance with Company standards 5.Ability to be flexible and perform a wide variety of functions within a working day Protective clothing/equipment requirement: -This position requires frequent walking, standing, bending (neck & waist), sitting, squatting, climbing, kneeling, twisting (neck & waist), and using both the dominate and non-dominate hands -Constant lifting and/or moving between 1-50 lbs, regular lifting and/or moving between 51-75 lbs, and occasional lifting and/or moving between 76-100 lbs required -Regularly works around heavy machinery equipment, -Exposure to extreme temperatures, humidity, and heights -Requires the use of safety glasses and shoes, tight-fitting clothing without tears, hearing protection and gloves

Installing or servicing hydraulic/electric brake system, suspension, alignment, drive train, and power steering parts and components; testing and installing batteries; dismounting/mounting tire and wheel assemblies, rebalancing wheels, and replacing, rebuilding and/or recalibrating TPMS components;

Must be able to run Trumpf Turret machine and press brake.

The Opportunity: Press Brake OperatorPRIMARY FUNCTION: The Press Brake Operator is responsible for the set-up, adjustment, and operation of our press brake machines to perform a wide variety of prototype jobs, short run parts, and long run parts. Press Brake OperatorPEKO Precision Products: We Make

Press Brake OperatorNesco Resource is partnered with a top-tier manufacturing company in Henrietta, NY seeking a highly skilled and technically proficient Press Brake Operator with a strong background in metal fabrication and sheet metal processing. The ideal candidate will have extensive experience

We're Hiring For:Spot Welder Grinder Experienced Press Brake Operator Laser/Turret Operator Experienced PEM Operator QA Inspector QA Engineer Experienced MIG/TIG Welder Maintenance Mechanic Punch Press OperatorDownload the application form and submit it below!Apply now.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

UPS Part-Time Package Delivery Drivers.They're the ones who drive our familiar brown trucks, bringing packages great and small to our customers.They're a friendly, physically active crew who enjoy fast-paced work, being outdoors, and being behind the wheel!.The ability to lift up to 70 lbs.Valid dri

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

Frito-Lay is seeking Warehouse Workers / Material Handlers to work in distribution centers loading, unloading, moving, and organizing snack products for delivery routes.Warehouse Workers are responsible for loading delivery trucks with product, unloading incoming shipments, moving product throughout

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

AVI Foodsystems - - Responsibilities: Receive products into the warehouse; Verify quantity and description of products; Assemble and fill orders for shipment; Stock incoming orders; Maintain accurate inventories; Follow receiving procedures; Comply with AVI policies and procedures; Report issues to

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

Frito Lay - [Warehouse Associate / Forklift Operator] As a Forklift Operator at Frito Lay, you'll: Safely operate a forklift to load and unload pallets and individual cases to and from trailers; Pick appropriate cases according to order using required technology; Load trailers via carts or stack cas

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

Abacus Service Corporation - - Responsibilities: Transports materials between departments and production floors; Performs shipping/receiving, storing, issuing and delivering materials; Operates sit-down, standing, and side-loader forklifts; Maintains accurate inventory counts and transactions; Foll

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

Responsibilities: Move and stock merchandise using forklifts and pallet jacks; Unload incoming and load outbound merchandise; Verify, audit, and record merchandise; Prepare orders and replenish pick areas; Complete forklift safety checks and maintain clean work areas.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

Thermo Fisher Scientific - 1600 Lexington Avenue - Responsibilities: Operate forklifts and warehouse equipment; Load, unload, pick, pack, and stage shipments; Verify shipments and maintain inventory records; Inspect equipment and report safety concerns; Keep warehouse areas clean and organized.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

AVI Foodsystems - - Responsibilities: Load company vehicle with products; Deliver food and products to client locations; Collect products and paperwork from attendants; Discard unsold and stale merchandise; Maintain company vehicle.