Trabajos calibration engineer en Hoboken, New JerseyCrear alertas

Job Description The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2B design-build contract for Phase 2 that includes two tunnels that will allow the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. POSITION SUMMARY The Construction Quality Engineer (CQE) is responsible for implementation of the Quality Plan and oversight of all quality issues, ensuring that all aspects of the tunnel meet the required contractual, technical, quality and regulatory standards focusing on quality assurance and control throughout the construction process. He must ensure compliance with the Construction Quality Management Plan (CQMP), Inspection and Test Plans (ITPs), released-for-construction (RFC) drawings and applicable standards. This position must operate independently from production and supervision teams to maintain objectivity and integrity in quality program processes. RESPONSIBILITIES • Develop and implement quality assurance plans ensuring that all construction activities comply with project specifications and standards. This includes preparing method statements, inspection and test plans, and quality management policies and procedures., • Evaluate and document the quality of tunnel construction performed by the construction team, suppliers, and/or subcontractors, ensuring compliance with project requirements, RFC and As-Built drawings, and specifications., • Review and assess the quality of material used in construction, ensuring they meet the required specifications. This involves conducting inspections and tests on materials before they are used on-site., • Maintain comprehensive QA/QC documentation, including certificates, calibration records, test results and non-compliance reports. Ensure that all documentation is accurate and readily available for audits and inspections., • Verify that equipment used in the construction process is fit for purposes, properly calibrated, and maintained as required., • Identify and report non-compliant construction work or supplied products upon discovery and monitor the disposition of non-conformances., • Control the further processing, delivery, installation, or use of non-compliant construction work or supplied products until the issues are corrected, controlled, or removed., • Coordinate and notify all quality activities as indicated in the ITPs with Quality team, and other relevant parties, including contracting authorities, utilities, and governmental authorities., • Coordinate with subcontractors and the client and ensure ITP Witness/Hold points implementation as per contract and technical specification requirements., • Ensure that inspections and tests are performed according to approved ITPs, and that all quality records and documents are complete, accurate, and meet applicable requirements., • Review test packages and relevant documentation prior to conducting inspections and testing., • Works closely with construction teams, project managers and subcontractors to ensure quality standards are met. This includes providing feedback and guidance on quality-related issues and facilitating training in the quality management system., • Perform regular audits and inspections to monitor compliance with quality standards and identify areas for improvement. Generate reports on quality trends and non-conformances issues, proposing corrective actions as necessary., • Organize quality toolbox talks and lessons learned and maintain documentation of such. Prepare and maintain quality records related to their assigned portion of work., • Perform other duties as requested by the Construction Quality Manager and the project’s Quality Manager. EDUCATION AND QUALIFICATIONS • Degree in civil engineering, construction management, geotechnical engineering or similar industry., • A minimum of 15 years of experience in heavy civil projects, tunnel, transit, infrastructure or similar projects in scale and complexity., • Demonstrated relevant experience in full-time Quality Assurance and/or Quality Control management and with design-build contracts., • Current certification in Quality Management from the American Society for Quality (ASQ) or the American Society of Civil Engineers or equivalent experience or education is preferable., • Certification and/or training in quality control inspection and testing, particularly in transit construction projects., • Certification and/or documented training in construction quality assurance and quality control., • Familiarity with ISO 9001:2015 principles in quality systems and quality program implementation. WORK ENVIRONMENT • Work is primarily performed at active construction sites, including underground and surface environments., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy equipment., • Exposure to noise, dust, vibration, confined spaces, and varying weather conditions is common., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require., • Occasional office-based work is required for reviewing documents, preparing reports, and coordinating with project management teams. FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodations will be provided to qualified individuals with disabilities in accordance with applicable law. If you need a reasonable accommodation during the interview process, please contact our HR team.

Job DescriptionFinal compensation will be based on a combination of:· Relevant work experience· Education· Project size · Project location· Required working hours· Candidate subject matter expertise and/or specialty · Ability to be approved by agencies/owners as required· Final salary determination is negotiable Come bridge the gap between you and your career goals! Recently ranked as a best U.S. construction workplace by Fortune Magazine, MLJ Contracting is driven by passion and built on trust. When you work at MLJ, you work for a company that values your well-being, your talent, and your career aspirations. If you are looking for a fulfilling career, come join our family and turn big ideas into even bigger realities. As a premier general contractor in the heavy construction market, MLJ Contracting successfully performs major public works projects for client agencies across the New York city area. Proud of our quality workmanship and engaging projects, we always maintain the highest standards of safety and professionalism. Want to build a career that stands the test of time? Join MLJ and lay the foundation for a better future. The Quality Manager is responsible for all quality-related functions on projects to which they are assigned. II. EDUCATION/CERTIFICATIONS • BS in engineering or related field or equivalent years' experience in the industry., • Certified Quality Engineer(CQE) as recognized by the American Society for Quality (ASQ)., • Certified ISO-9000 Lead Auditor, as recognized by the ANSI-ASQ National Accreditation Board (ANAB)., • The QM shall be a member of ASQ, or other recognized national quality-focused organization. III. KEY RESPONSIBILITIES • Review submittals (catalog cuts, shop drawings, as-built drawings etc.) to ensure that they meet contract requirements., • Prepare reports to document compliance with quality requirements or issue non-conformance reports as necessary., • Identify and report quality problems or trends in the assigned area or program., • Recommend corrective action to quality problems., • Aid or lead project-wide system audits and surveillance, including supplier or subcontractor audits or surveillance to approved checklists and procedures., • Support quality assurance for a project to ensure it is designed, procured, and installed to meet customer and division quality requirements., • Write quality plans, procedures, audit checklists, and plans., • Implement training sessions to reduce turnover., • Conduct inspections of work as required- material tests, form work, reinforcement, structural steel, etc., • Maintain testing equipment calibration records and update per the requirements., • Schedule special inspections as required., • The Quality Manager is responsible for developing and implementing the Quality Plan and for the management and oversight of all quality issues., • Perform other duties as required. IV. QUALIFICATIONS OF THE POSITION: • A minimum of 10 years' total experience with the past five (5) years being Quality related., • Prior Experience in Quality related functions on MTA Heavy Civil Projects. #ZR Salary Range:$130,000—$180,000 USDCompany DescriptionIovino Enterprises is the parent company to four New York City based construction companies that share a common commitment to excellence, innovation, and exceptional results. Unlock your potential and seize the opportunity to be at the forefront of a construction empire. As a product of 35 years in the construction business, we have harnessed expertise in cutting-edge technology, human capital management, finance, and legal/compliance, all while fostering an environment where each company retains its distinct personality and style. This “family of companies” culture is rooted in a common vision and set of values: respect, development for all employees regardless of position, and a commitment to give back to our communities.Iovino Enterprises is the parent company to four New York City based construction companies that share a common commitment to excellence, innovation, and exceptional results. Unlock your potential and seize the opportunity to be at the forefront of a construction empire.\r\n\r\nAs a product of 35 years in the construction business, we have harnessed expertise in cutting-edge technology, human capital management, finance, and legal/compliance, all while fostering an environment where each company retains its distinct personality and style. This “family of companies” culture is rooted in a common vision and set of values: respect, development for all employees regardless of position, and a commitment to give back to our communities.

Job DescriptionRadical AI is replacing an R&D process that currently takes 10+ years and $100 million to produce a single discovery. Our self-driving lab platform combines AI with autonomous robotics to run experiments, analyze results, and iterate—continuously, without human bottlenecks. For industries like aerospace, automotive, defense, energy, manufacturing, semiconductors, and space, that means breakthroughs in weeks instead of years. The Role As a Perception Engineer in the Robotics and Automation group at Radical AI, you will design, deploy, and scale robust vision-guided automation in fast-moving lab environments. Your expertise will shape both the physical and systemic implementation of lab automation. You will collaborate closely with Roboticists, Mechatronics, Mechanical Engineers, and Material Scientists to meet rigorous and sometimes dynamic design requirements at an unprecedented deployment speed—bringing open-mindedness and creative fearlessness to ship world-class technology on timelines most teams consider impossible. Not you. What You'll Do • Design, implement, and deploy 2D and 3D vision systems for robotic manipulation, inspection, state verification, and sensor fusion, • Develop vision-guided automation solutions integrating cameras, lighting, optics, and robots in laboratory and industrial environments, • Implement perception pipelines for object detection, segmentation, pose estimation, and feature extraction, • Work on classical detection algorithms as well as training and deploying state-of-the-art vision models, • Own camera calibration and system-level accuracy validation, • Integrate vision outputs with robot motion planning, grasping, and task execution, • Collaborate with software, mechatronics, and mechanical teams to translate experimental and operational needs into automated solutions, • Contribute to technical direction, architecture decisions, and best practices across the robotics, perception, and automation software stackWhat We're Looking ForRequired, • Degree in Robotics, Computer Vision, Electrical Engineering, Computer Science, or a related field, • 5+ years of experience designing and deploying machine vision systems in robotics or automation environments, • Strong hands-on experience with 2D/3D cameras, lenses, lighting, and optics, • Proficiency in Python and/or C++ for production software development, • Experience integrating vision systems with industrial robots and motion platforms, • Experience solving novel computer vision problems, • Experience with simulation, sim2real and domain randomization in a computer vision domain, • Experience with robotic control frameworks (e.g., ROS/ROS2 or equivalent custom systems), • Demonstrable ability to work independently in a hands-on, development-oriented environment.Nice to Have, • Deep robotics automation experience outside of vision, • Hands on experience developing and integrating VLA models for robotics, • Experience deploying ML and multimodal models on robotic platforms, • Ability to develop novel algorithms for state estimation of fluids and particle flows, • Experience in laboratory automation, materials science, or scientific instrumentation, • Prior startup experience or ownership of systems from early prototype through production What We OfferA competitive compensation package also includes the best in benefits:, • Medical, dental, and vision insurance for you and your family, covered at 100%, • Mental health and wellness support, • Unlimited PTO and 14+ company holidays per year, • Company-wide end-of-year shutdown, including two weeks of paid time off, • 401K, • Equity Disclosure Radical AI is committed to equal employment opportunity regardless of race, color, ancestry, national origin, religion, sex, age, sexual orientation, gender identity and expression, marital status, disability, or veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Protection & Control Engineer/Technician – Field Testing & Commissioning Travel-Heavy Field Role – Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We’re looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You’ll Do: Test and commission P&C systems on high-voltage substations (15 kV – 500 kV) Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. Experience with NETA, IEEE, NFPA, and related standards Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: Bachelor’s in Electrical Engineering/Electrical Technology Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

Job DescriptionSalary: $38.46 - $57.69 Per Hour DOE Company Overview LD power automation is a leading engineering company specializing in marine and industrial electrical and control services and products. With extensive experience in installation, commissioning, and troubleshooting, we deliver professional and timely solutions that help our clients achieve operational excellence. Our commitment to building strong, long-term relationships is founded on trust and a deep understanding of our clients' needs. For more information, visit our website. Job Summary Were looking for a hands-on Field Service Engineer whos ready to dive into the world of marine and industrial power systems. If you enjoy solving real-world problems, working with your hands, and being the go-to expert when things need fixing or fine-tuning, this might be the role for you. Youll be installing, troubleshooting, and maintaining everything from motors and switchgear to PLCs and control systems aboard large ocean-going vessels while theyre in port. Its a mix of tech, teamwork, and travel, with plenty of variety and challenges to keep things interesting. Youll work closely with customers, vendors, and manufacturers to make sure systems run smoothly and safely. If youre someone who takes pride in doing things right and enjoys working in dynamic environments, wed love to hear from you. Key Responsibilities • Communication between cooperating parties and assist to ensure smooth operation of electrical and mechanical equipment., • Performing maintenance including field installation, validation, and testing of electronic, electric and mechanic components., • Troubleshooting by observing mechanical devices in operation, listening for problems and using electrical meters, calibration equipment, mobile and handheld computer systems, hand tools, PLC, operator interface, data collection, and safety-related control systems., • Remove and replace defective parts by properly dismantling devices using hoists, cranes, and hand and power tools, examining form and texture of parts., • Maintain a safe and clean working environment by complying with company procedures, rules, and regulations. Qualifications • Electrical Engineering Bachelors degree or a combination of a relevant certificates, Associate or Technical degree and 4-5 years of relevant work experience., • Must possess sufficient manual dexterity to operate tools, machinery and repair equipment and lift at least 40 pounds unassisted., • Ability to walk, stoop, kneel, crouch, crawl, and climb up/down ladders and stairs, including on uneven, moving, or slippery surfaces., • Selfmotivated and capable of working independently and as part of a team., • Ability to remain focused, composed, and effective in highpressure or stressful situations., • Demonstrates a strong sense of responsibility and ownership, consistently taking proactive action in tasks, assignments, and unexpected situations., • Ability to obtain a TWIC card (Transportation Worker Identification Credential). Skills & Competencies • Knowledge of low voltage and line voltage AC and DC systems and relays, high voltage experience including terminations a plus., • Basic hydraulic and machine repair knowledge a plus., • Excellent written and verbal communication skills Electrical/Mechanical aptitude, advanced skills in one or more of the following areas a plus: software, electronics, low and high voltage electrical, mechanical and propulsion systems, automation, PLC programming, Ethernet network/Serial communication., • Ability to read Schematics., • Ability to write reports, effectively present information and respond to questions from groups of managers, clients, and customers., • Proficiency in installation, troubleshooting, and commissioning., • Ability to collaborate with clients and ensure timely service delivery., • Must be an avid user of computer software including Microsoft Office. Working Conditions • Working conditions are marine/industrial environments which require the use of company uniform and safety equipment, to include but not limited to safety glasses, hearing protection, steel toe work boots, hardhat and safety vests., • Comfortable working aboard vessels, in confined spaces, and in challenging environmental conditions including rain, ice, snow, wind, heat, and other weather extremes., • Available to work flexible, on-call hours, including varying and unpredictable shift schedules., • Regular local travel with occasional international trips as required. Other • Must be able to pass a drug screening and background check upon request for customer site access. A clean driving record is required., • As our business and operations evolves to meet changing market needs, team members are expected to adapt seamlessly and undertake additional essential projects and tasks when required. Compensation & Benefits LD power automation provides competitive compensation and benefits to acknowledge employees contributions. Base pay is determined by job-related knowledge, skills, experience, location, and internal equity considerations: • 401(k)/Employer Matching, • Health, Dental, and Vision Insurance, • Paid Time Off

Job DescriptionAbout Fusemachines Founded in 2013, Fusemachines is a global provider of enterprise AI products and services, on a mission to democratize AI. Leveraging proprietary AI Studio and AI Engines, the company helps drive the clients’ AI Enterprise Transformation, regardless of where they are in their Digital AI journeys. With offices in North America, Asia, and Latin America, Fusemachines provides a suite of enterprise AI offerings and specialty services that allow organizations of any size to implement and scale AI. Fusemachines serves companies in industries such as retail, manufacturing, and government.Fusemachines continues to actively pursue the mission of democratizing AI for the masses by providing high-quality AI education in underserved communities and helping organizations achieve their full potential with AI.Salary Range: US$ 140,000-170,000/year Important: Immigration Sponsorship Policy This position is not elegible for employment visa sponsorship or transfer sponsorship now or in the future. • Direct Company Sponsorship: Such as H-1B, J-1, or TN visas., • Employer of Record: Listing Fusemachines as the immigration employer on any government documentation., • Written Documentation: Providing letters or other support for any work authorization (e.g., OPT, STEM OPT, CPT). Role Overview We’re hiring a mid-to-senior Machine Learning Engineer / Data Scientist to build and deploy machine learning solutions that drive measurable business impact. You’ll work across the ML lifecycle—from problem framing and data exploration to model development, evaluation, deployment, and monitoring—often in partnership with client stakeholders and internal delivery teams. You should be strong in core data science and applied machine learning, comfortable working with real-world data, and capable of turning modeling work into production-ready systems. Key Responsibilities • Problem Framing & Stakeholder Partnership, • Translate business questions into ML problem statements (classification, regression, time series forecasting, clustering, anomaly detection, recommendation, etc.)., • Collaborate with stakeholders to define success metrics, evaluation plans, and practical constraints (latency, interpretability, cost, data availability)., • Data Analysis & Feature Engineering, • Use SQL and Python to extract, join, and analyze data from relational databases and data warehouses., • Perform data profiling, missingness analysis, leakage checks, and exploratory analysis to guide modeling choices., • Build robust feature pipelines (aggregation, encoding, scaling, embeddings where appropriate) and document assumptions., • Model Development (Core ML), • Train and tune supervised learning models for tabular data (e.g., logistic/linear models, tree-based methods, gradient boosting such as XGBoost/LightGBM/CatBoost, and neural nets for structured data)., • Apply strong tabular modeling practices: handling missing data, categorical encoding, leakage prevention, class imbalance strategies, calibration, and robust cross-validation., • Build time series models (statistical and ML/DL approaches) and validate with proper backtesting., • Apply clustering and segmentation techniques (k-means, hierarchical, DBSCAN, Gaussian mixtures) and evaluate stability and usefulness., • Apply statistics in practice (hypothesis testing, confidence intervals, sampling, experiment design) to support inference and decision-making., • Deep Learning, • Build and train deep learning models using PyTorch or TensorFlow/Keras., • Use best practices for training (regularization, calibration, class imbalance handling, reproducibility, sound train/val/test design)., • Evaluation, Explainability, and Iteration, • Choose appropriate metrics (AUC/F1/PR, RMSE/MAE/MAPE, calibration, lift, and business KPIs) and create evaluation reports., • Perform error analysis and interpretation (feature importance/SHAP, cohort slicing) and iterate based on evidence., • Productionization & MLOps (Project-Dependent), • Package models for deployment (batch scoring pipelines or real-time APIs) and collaborate with engineers on integration., • Implement practical MLOps: versioning, reproducible training, automated evaluation, monitoring for drift/performance, and retraining plans., • Documentation & Communication, • Communicate tradeoffs and recommendations clearly to technical and non-technical stakeholders., • Create documentation and lightweight demos that make results actionable.Success in This Role Looks Like, • You deliver models that perform well and move business metrics (revenue lift, cost reduction, risk reduction, improved forecast accuracy, operational efficiency)., • Your work is reproducible and production-aware: clear data lineage, robust evaluation, and a credible path to deployment/monitoring., • Stakeholders trust your judgment in selecting methods and communicating uncertainty honestly.Required Qualifications, • 3–8 years of experience in data science, machine learning engineering, or applied ML (mid-to-senior)., • Strong Python skills for data analysis and modeling (pandas/numpy/scikit-learn or equivalent)., • Strong SQL skills (joins, window functions, aggregation, performance awareness)., • Solid foundation in statistics (hypothesis testing, uncertainty, bias/variance, sampling) and practical experimentation mindset., • Hands-on experience across multiple model types, including:, • Classification & regression, • Time series forecasting, • Clustering/segmentation, • Experience with deep learning in PyTorch or TensorFlow/Keras., • Strong problem-solving skills: ability to work with ambiguous goals and messy data., • Clear communication skills and ability to translate analysis into decisions.Preferred Qualifications, • Experience with Databricks for applied ML (e.g., Spark, Delta Lake, MLflow, Databricks Jobs/Workflows)., • Experience deploying models to production (APIs, batch pipelines) and maintaining them over time (monitoring, retraining)., • Experience with orchestration tools (Airflow, Prefect, Dagster) and modern data stacks (Snowflake/BigQuery/Redshift/Databricks)., • Experience with cloud platforms (AWS/GCP/Azure/IBM) and containerization (Docker)., • Experience with responsible AI and governance best practices (privacy/PII handling, auditability, access controls)., • Consulting or client-facing delivery experience. Certifications (Strong Plus) Candidates with at least one relevant certification are especially encouraged to apply: • Cloud certifications: AWS, Google Cloud, Microsoft Azure, or IBM (data/AI/ML tracks), • Databricks certifications (Data Scientist, Data Engineer, or related)Nice-to-Have, • Causal inference experience (e.g., quasi-experimental methods, propensity scores, uplift/heterogeneous treatment effects, experimentation beyond A/B tests)., • Agentic development experience: designing and evaluating agentic workflows (tool use, planning, memory/state, guardrails) and integrating them into products., • Deep familiarity with agentic coding tools and workflows for accelerated product development (e.g., AI-assisted IDEs, code agents, automated testing/refactoring, repo-aware assistants), including strong judgment on quality, security, and maintainability.Fusemachines is an Equal Opportunities Employer, committed to diversity and inclusion. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or any other characteristic protected by applicable federal, state, or local laws. Powered by JazzHR pYO5KHk85I

Job Description We are seeking a Senior Robotics Engineer to lead advances in perception, sensor fusion, and sensor calibration that directly impact the growth and success of our business. As we expand, your role will evolve to meet new challenges and priorities. Key Responsibilities: • Lead SLAM development to improve product quality and consistency across diverse operating conditions, including GPS-degraded environments., • Enhance sensor fusion and calibration processes by integrating multi-user, multi-session point cloud maps and automating LiDAR and imagery alignment for consistent large-scale scene generation., • Drive scalability and reliability by eliminating the need for extrinsic sensor measurements in the field and proactively identifying and correcting data quality issues., • Collaborate closely with a mission-driven team of robotics and enterprise software experts to revolutionize fieldwork in the energy sector., • Develop and implement perception solutions, focusing on LiDAR, sensor fusion, and SLAM mapping for building accurate environmental maps. Required Experience & Qualifications: • 4+ years of experience in perception and mapping in robotics., • Proven background working with mobile platforms such as cars, drones, or robots performing large-scale mapping using LiDAR and other sensors., • Hands-on experience with systems integration—understanding how cameras, sensors, vehicles, and perception software work together., • Experience with SLAM solutions involving ground-based LiDAR and extensive sensor calibration (intrinsic and extrinsic), including automated data-driven techniques., • Proficiency in multimodal sensor fusion and working with ultra-wide-angle cameras., • Track record of succeeding on small, fast-moving engineering teams. Technical Skills: • Strong proficiency in C++ and Python., • Deep expertise in SLAM, sensor calibration, and sensor fusion techniques. Soft Skills: • Mission-first mindset focused on delivering strong customer and business outcomes., • Curiosity and adaptability with a willingness to learn and pivot as needed.

AeroVect is transforming ground handling with autonomy, redefining how airlines and ground service providers around the globe run day-to-day operations. We are a Series A company backed by top-tier venture capital investors in aviation and autonomous driving. Our customers include some of the world’s largest airlines and ground handling providers. For more information, visit _. We are looking for a Senior Software Engineer to join the Localization team and take ownership of our calibration systems — from robustifying and stabilizing the existing offline calibration stack, through adapting it for new sensors and environments, to building online calibration validation for continuous autonomous operations at major airports. Beyond calibration, you will contribute to the broader localization, mapping, and sensor integration efforts as the team scales. You will work under the supervision of a Staff Localization Engineer and collaborate closely with the Perception, Planning, and Infrastructure teams. You Will Own the calibration stack end-to-end — improve reliability of existing offline calibrations, close coverage gaps across the sensor suite (LiDAR, IMU, GNSS, cameras, radar), and ensure every calibration is repeatable, traceable, and has clear pass/fail criteria Design and build an online calibration validation system that monitors cross-sensor consistency during live missions, detects drift, and integrates with the vehicle's safety architecture Contribute to the localization and mapping pipeline — sensor integration, performance tuning, regression testing, and deployment to new operating environments Develop tooling for calibration health logging, diagnostics, and post-mission analysis Deploy, test, and iterate using data from real autonomous operations at active airports You Have 5+ years of experience in robotics or autonomous vehicles with hands-on work in sensor calibration, localization, or state estimation Strong practical knowledge of multi-sensor calibration - intrinsic, extrinsic, and temporal - across LiDARs, IMUs, GNSS, and cameras Proven experience with non-linear optimization frameworks (Ceres, GTSAM, g2o) or filtering approaches (EKF, UKF) Strong C++ skills (C++17+) and working experience with Linux and ROS/ROS2 Understanding of how calibration quality propagates through localization and perception BS or MS in Computer Science, Robotics,Electrical/Mechanical Engineering, or related field We Prefer MS or PhD with a focus on calibration, localization, or state estimation Experience building online/runtime calibration monitoring for deployed autonomous systems Experience with factor graphs, graph-based SLAM, or open-source tools like Kalibr, LIO-SAM, GLIM, Ceres, GTSAM Track record of deploying calibration or localization systems on real hardware in production environments Experience defining safety-relevant thresholds and working with safety monitoring architectures Familiarity with OpenCV, PCL, or Open3D

Electrical Control Engineer Dallas, NC Experience level: Mid-senior Experience required: 10 Years Education level: Associate degree Job function: Engineering Industry: Electrical/Electronic Manufacturing Compensation: $81,000 - $90,000_ Total position: 1 Relocation assistance: No SUMMARY: Providing technical and engineering support for automated industrial machinery and industrial electronic controls. ESSENTIAL DUTIES AND RESPONSIBILITIES Other duties may be assigned. • Read, create, and modify electrical schematics according to IEC and NFPA standards., • Read, create, and modify fluid power (hydraulics and pneumatics) schematics according to IEC and NFPA standards., • Read, create, and modify P&ID schematics according to IEC and NFPA standards., • Read, create, and modify programming code in the following languages: Siemens Structured Control Language (SCL), Siemens Statement List, Siemens Graph 7, Siemens Function Block Diagram (FBD), Ladder Logic (Siemens, Allen Bradley and others), Allen Bradley Structured Text, Microsoft Visual Basic, C++, C#, Java, Python, Microsoft SQL, and others., • Read, create, and modify database tables in MSSQL server., • Read, create, and modify HMI programs for Siemens, Allen Bradley, and other HMIs, this includes using WinCC Flex and Panel Builder 32., • Read, create, and modify SCADA programs for Siemens WinCC, and Inductive Automation., • Install, commission, repair and troubleshoot any brand of PLC, HMI or VFD., • Install, commission, repair and troubleshoot any industrial communications media and protocols., • Install, commission, repair and troubleshoot a wide range of industrial machinery., • Upgrade and retrofit controls that are obsolete with no direct replacements available. This requires making all necessary modifications to existing equipment., • Possess exemplary troubleshooting skills and be able to repair any machinery from any manufacturer., • Properly use oscilloscopes, test meters, megohmmeters, process calibrators, thermal imagers, vibrations analyzers, data loggers and any other test equipment., • Sources all necessary materials for projects and repairs and works with maintenance inventory clerk to acquire needed materials in timely manner., • Train technicians and apprentices the proper methods and procedures for process instrumentation calibration., • Train technicians and apprentices how to read and understand programming code and logic., • Train technicians and apprentices the best practices and methods of troubleshooting components of electrical controls systems., • Train technicians and apprentices about fluid power systems, and how to troubleshoot and repair these systems., • Must be able to perform all duties with minimal outside support., • Ensure all work is performed and executed safely. Must identify and correctly use appropriate PPE (Personal Protective Equipment) required for various tasks., • Must be able to work remotely and also be able to travel with all tools to multiple locations., • Serve as a resource to production staff in all departments in multiple facilities., • Support company efforts to develop and maintain positive Employee Relations. SUPERVISORY RESPONSIBILITIES: Responsible for training and supervising the mechatronics/controls technician apprentice(s). Will occasionally train and supervise seasonal interns. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: • Associates of Applied Science from accredited college in Electronics Engineering or Computer Science with emphasis on Programming or equivalent experience and certifications., • 10+ years direct experience in industrial automation., • Certification in programming preferred, such as Siemens or Allen Bradley certified programmer., • State issued electrical trades license preferred., • Proficient in AutoCAD Electrical (Preferred) LANGUAGE SKILLS: • Read, analyze, and interpret blueprints, mechanical and electrical schematics, and machine drawings., • Read, analyze, and interpret programming code documented in languages other than English., • Read, analyze, and interpret common scientific/technical journals, regulatory documentation, and legal documents., • Must be able to give clear and easy to understand written instructions., • Must be able to create easy to understand operating procedures. MATHEMATICAL SKILLS: • Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and/or permutations., • Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis., • Ability to code advanced mathematical concepts such as exponents, logarithms, quadratic equations, and/or permutations. REASONING ABILITY: • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Proven ability to interpret programming logic. OTHER SKILLS and ABILITIES: • Organized and able to archive all necessary documents, drawings, and information., • Eagerness to grow this position., • Exceptional interpersonal skills to effectively communicate with employees, colleagues, and Upper Management., • Hard-working and driven with the proven ability to work independently without supervision., • Ability to work in a team environment where all members are expected to contribute., • Strong understanding of the NFPA 70 International Electric Code. PHYSICAL DEMANDS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is regularly required to stand., • The employee is regularly required to walk, sit, reach with hands and arms, climb or balance, and stoop, kneel, or crouch., • The employee will occasionally climb to heights in excess of 60 feet from ground level., • The employee must regularly lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, color vision, peripheral vision, and depth perception. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to fumes, airborne particles or electrical hazards., • The employee is frequently exposed to extreme heat and sometimes must work in cold/freezing temperatures., • The employee works in high, precarious places, outside weather conditions, occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, and vibrations., • The noise level in the work environment is usually loud. Under the direction of the Production Supervisor supports department efforts to assure continuous operation of product manufacturing by performing the following duties personally or through department production employees. ESSENTIAL DUTIES AND RESPONSIBILITIES Producing first quality sheets on the presses. Filling and leveling the molds with resin. Accurately filling out production reports. Thoroughly clean molds and cover plates. Housekeeping to include presses, press area, the and vacuum system. All shall be cleaned daily and kept clean throughout shift. Remove out of spec material and place in designated area. Proper and safe operation of equipment. Press change times should be held to a minimum. Remain in work area. Leave area only at break time. Clean press pits per Production Supervisors schedule. Report all problems/challenges with equipment or quality of product to leadman or Production Supervisor immediately. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS: Valid drivers license. OTHER SKILLS and ABILITIES: The employee is required to be able to operate a forklift, scales, and department production equipment. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee frequently is required to walk, and talk or hear. The employee is occasionally required to climb and balance and stoop, kneel, crouch, or crawl. PHYSICAL DEMANDS (continued): The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and color vision.

Meet the Team As a Machine Learning Engineer II – Road & Lane, you will help develop next‑generation models that estimate road surfaces, lane geometry, and lane topology within Torc’s autonomy stack. You will work closely with perception, mapping, and planning teams to deliver high‑quality, production‑ready lane perception models that enable safe and reliable autonomous trucking. What You'll Do • Develop and train computer vision and deep learning models for road‑lane detection using monocular and multimodal sensor data (camera, LiDAR, radar)., • Build 3D road surface and lane geometry models in BEV space and integrate them into Torc’s autonomy pipeline., • Analyze model performance, identify corner cases, and improve robustness under diverse environmental and long‑tail conditions., • Develop and optimize large‑scale data processing workflows, including annotation, pseudo‑labeling, and data augmentation., • Implement scalable training and evaluation pipelines for lane perception models., • Own deployment-focused work to optimize models for real‑time execution on automotive‑grade hardware., • Leverage SD and HD map priors to improve lane estimation accuracy and stability., • Contribute to architectural discussions, model reviews, and system‑level integration efforts. What You'll Need to Succeed • Bachelor’s degree in Computer Science, Robotics, Electrical Engineering, Machine Learning, or a related field with 4+ years of experience, or a Master’s with 2+ years., • Hands‑on experience developing ML models for perception tasks such as lane detection, road surface modeling, multi‑camera fusion, or related geometry estimation., • Strong understanding of camera calibration, multi‑sensor alignment, and projection between image and BEV spaces., • Proficiency in Python and PyTorch, with experience writing production‑quality machine learning code., • Experience training models on large datasets and using scalable compute environments., • Understanding of relevant ML architectures, such as CNNs, transformers, and BEV‑focused perception networks., • Ability to analyze model performance metrics, debug failure cases, and iterate effectively., • Ability to work cross‑functionally with autonomy, perception, and software engineering teams. Bonus Points • Experience working specifically on lane perception, BEV networks, or road topology estimation., • Experience with CUDA kernels or custom PyTorch operations., • Familiarity with SD maps, localization pipelines, or map‑based priors., • Experience with distributed training or large‑scale experimentation frameworks (e.g., Ray)., • Publications in major ML/CV conferences (CVPR, ICCV, NeurIPS). Hiring Range for Job Opening US Pay Range $153,200 - $183,300 USD Job ID: 102516

Derq is an MIT spinoff building AI-powered traffic safety and smart infrastructure. We’re a team of passionate innovators, leveraging the latest in AI and technology to transform the future of mobility. Our platform enhances road safety and traffic management by turning real-time data into actionable insights for cities and road operators. Our patented technology collects and analyzes data from connected sensors like cameras, radar, and traffic signal controllers to help predict and prevent road incidents. We deploy edge and cloud solutions that make intersections and highways safer and smarter. We’re looking for a highly motivated and technically proficient Field Application Engineer (FAE) – Intelligent Transportation Systems (ITS) to work hands-on at customer sites and in the field, acting as the technical bridge between customers and our internal teams. You will support the full solution lifecycle, from pre-sales technical input to deployment, integration, and post-go-live support. In this role, you’ll ensure smooth implementations, troubleshoot complex issues, and help our technology perform reliably in real-world environments. • Support on-site and remote deployment of our solutions across sensors, edge devices, and software platforms, including configuration, calibration, testing, and validation., • Act as the technical point of contact during pilots, PoCs, and live implementations, owning technical execution end-to-end., • Partner with the Project team to plan and run deployments: align scope, milestones, site readiness, risks, and action items, and provide clear status updates., • Work closely with customers to understand technical requirements and site constraints, and translate them into deployment and integration steps., • Troubleshoot hardware, software, and network issues in the field, lead root cause analysis, and drive resolution with Engineering and Product., • Collaborate with Engineering, Product, and Project teams to share field learnings, collect requirements, and highlight gaps for improvement., • Create and maintain technical documentation, installation guides, and field reports to support repeatable deployments., • Train customer teams and internal stakeholders when required., • Provide input to pre-sales and post-sales when needed (demos, technical scoping, and RFP/RFI technical support)., • Must have experience in Intelligent Transportation Systems (ITS) (traffic management, smart mobility, road safety, or related deployments)., • 7+ years of experience in a Field Application Engineer, Systems Engineer, Solutions Engineer, or similar customer-facing technical role., • Hands-on experience with field deployments: installing, configuring, and supporting hardware + software in real environments., • Strong troubleshooting skills across hardware, software, and networking (IP networks, switches/routers, VPNs, basic firewall concepts)., • Comfortable working with edge devices and Linux-based systems, including reading logs and diagnosing issues., • Ability to work directly with customers, understand site constraints, and translate needs into clear technical actions., • Strong documentation habits (installation guides, field reports, runbooks)., • Willingness to travel and work on-site as needed ~ 50%

Critical Key requirements o The proposed QA Engineer shall possess a minimum of ten (10) years prior work experience, with at least seven (7) of those years working in Quality Assurance, Auditing, Project Management or Construction Management. o Hold at least a Bachelor’s degree in a relevant field of Science, or Applied Science (e.g. – engineering, Engineering Technology) Preferred structural background Working knowledge of Microsoft Office Suite and Office 365 Experience with construction Quality systems, design quality processes, auditing, report writing, quality testing and NYSBC o Experience with the design and construction of projects for structural, civil, electrical or communications and signal Highly desired: Worked with ACI, NFPA, ASTM, AASHTO, NYSBC/International Building Code, OSHA, AREMA, ISO, UL, AISC, FTA, FRA SUMMARY OF THE FUNCTION/ROLE The objective of this contract is to augment C&D Metro-North Railroad’s Quality Assurance (QA) staff with one (1) full time Quality Assurance (QA) Engineer to work out of Metro-North Offices at 420 Lexington Avenue, Mid-town Manhattan. The QA Engineer shall be under the supervision of and report directly to Director of Quality Assurance or his’s/her’s designated authorized representative. The QA Engineer shall work five days a week, eight hours a day. A railroad pass for transportation to field meetings along the right of way will be provided. The overall duration of the contract shall be approximately twelve (12) months. I. DETAILED DESCRIPTION OF SERVICES REQUIRED The QA Engineer shall provide various related services to support the Capital Programs Department, which is comprised of the following areas: Line Structures, Buildings, Shops and Yards, Passenger Stations, Electrical/Power, Security Enhancements, Parking Lots, Site Work, plumbing, Mechanical, and Environmental. The work is predominantly field work. The type of tasks required of the Consultant shall include but are not limited to the following: A. Immediate Needs Project Quality submittals o Oversight of construction consultants and the Contractor’s Quality personnel to ensure contract quality requirements are being followed. o Review, comment, and monitor status of Consultant or Contractor’s Quality Manual and Contract Quality Plan (CQP) and, where applicable Software QA Plan, to ISO 9001 standards o Review, comment, and monitor the status of Inspection & Test Plan and Quality Work Plans o Review and comment on Commissioning and Systems Integration Plan and testing procedures o Review and comment on Contractor QC procedures, forms, matrixes o Review, comment, and monitor the status of Inspections, Tests, and Nonconformances Chapter 2 Project Contract Quality Activities o Perform inspection walkthroughs alongside the Project Management Team and provide technical recommendation o Attend periodic Quality Work Group Meetings and other project meetings to plan out future Quality events, resolve quality breakdowns and non-conformances, make decisions concerning the disposition to non-conformances, etc. o Participate in FAI / FAT for critical equipment and/or systems, such as on-site inspection of the quality control process o Monitor submission of required Quality submittals. o Perform audits/assessment/inspections of suppliers or manufacturers. Chapter 3 System Level Oversight of Quality Management Activities o Monitoring of compliance to the Consultant or Contractor’s QM/ CQP, such as calibration practices, approved procedures, documented work, performed testing and approvals o QA audits of jobsite activities as well as project surveillances. o System level oversight of personnel performing special processes (for special processes where applicable Code requires certified skills) II. RELEVANT PRIOR EXPERIENCE The proposed QA Engineer shall possess a minimum of ten (10) years prior work experience, with at least seven (7) of those years working in Quality Assurance, Project Management or Construction Management. Hold at least a Bachelor’s degree in a relevant field of Science, or Applied Science (e.g. – Engineering, Engineering Technology) Working knowledge of Microsoft Office Suite and Office 365 Experience with the design and construction of projects around an operating railroad is highly desirable Experience with training, systems development, construction or construction management, and quality management practices III. PERSONNEL QUALIFICATIONS: Personal abilities of being well-organized, a self-starter, a team player, a multitasker Strong oral and written communication skills are required to develop policies and guidelines, chair meetings, as well as provide technical and administrative support as needed Strong interpersonal skills Strong technical, analytical and problem solving skills Must have valid driver’s license IV. PREFERRED: Completed training in the principles and practices of Quality Management Systems or Quality Management System audits under a program sanctioned by a National or International Standards organization Completed training in the principles and practices of Project Management or Construction Management under a program sanctioned by a National or International Standards organization Training in and experience in implementing quality management systems Active NYS Professional Engineering License Experienced in quality control in the construction environment. Experience with Supplier Qualification, At-source product quality inspections Industry experience: o Railroad infrastructure o Railroad field work practices o Any government-regulated industry requiring Quality Management Systems Flexible work from home options available. Compensation: $70.00 - $80.00 per hour WORKING FOR YOUR SUCCESS! "Empowering Excellence, Enabling Growth: Transforming Businesses through Expertise, Collaboration and Innovation!" At Kumar Consulting, our vision is to be a pioneering force in transforming businesses through a unique blend of expertise, collaboration, and innovation. With decades of experience in diverse sectors such as Health & Human Services, Transportation, Logistics, Media & Advertising, Insurance, and State and Federal Programs, we are committed to driving positive change and growth. Our unwavering dedication to excellence propels us forward as we shape the future of Enterprise Architecture, Business Architecture, Business Process Management, Process Improvement, Project Management, Solution Architecture, Software Development, and IT Staffing. We envision a world where businesses and organizations thrive, powered by our comprehensive insights and holistic solutions. Guided by integrity, collaboration, and continuous learning, we strive to be the trusted partner for public and private sector companies seeking transformational success. With each endeavor, we aim to redefine possibilities, exceed expectations, and leave an indelible mark on industries worldwide. Join us as we redefine the boundaries of innovation, create lasting value, and foster growth that resonates across sectors and generations. At Kumar Consulting, we believe in a future where expertise and innovation converge to shape a world of limitless opportunities. Looking for Opportunity to grow? "For over a decade, we have been empowering excellence, enabling growth, and transforming businesses through expertise, collaboration, and innovation. Join our dynamic consulting team and contribute to shaping the future of business."

PsiQuantum’s mission is to build the first useful quantum computers—machines capable of delivering the breakthroughs the field has long promised. Since our founding in 2016, our singular focus has been to build and deploy million-qubit, fault-tolerant quantum systems. Quantum computers harness the laws of quantum mechanics to solve problems that even the most advanced supercomputers or AI systems will never reach. Their impact will span energy, pharmaceuticals, finance, agriculture, transportation, materials, and other foundational industries. Our architecture and approach is based on silicon photonics. By leveraging the advanced semiconductor manufacturing industry—including partners like GlobalFoundries—we use the same high-volume processes that already produce billions of chips for telecom and consumer electronics. Photonics offers natural advantages for scale: photons don’t feel heat, are immune to electromagnetic interference, and integrate with existing cryogenic cooling and standard fiber-optic infrastructure. In 2024, PsiQuantum announced government-funded projects to support the build-out of our first utility-scale quantum computers in Brisbane, Australia, and Chicago, Illinois. These initiatives reflect a growing recognition that quantum computing will be strategically and economically defining—and that now is the time to scale. PsiQuantum also develops the algorithms and software needed to make these systems commercially valuable. Our application, software, and industry teams work directly with leading Fortune 500 companies—including Lockheed Martin, Mercedes-Benz, Boehringer Ingelheim, and Mitsubishi Chemical—to prepare quantum solutions for real-world impact. Quantum computing is not an extension of classical computing. It represents a fundamental shift—and a path to mastering challenges that cannot be solved any other way. The potential is enormous, and we have a clear path to make it real. Come join us. Job Summary: The OS Core Team at PsiQuantum works closely alongside engineers and scientists in the electronics, system architecture, and validation teams and is responsible for building the scalable, distributed, fault-tolerant control plane and operating system for utility scale photonic quantum computers. Our team is responsible for orchestration, scheduling, kernel architecture, co-design, calibration, validation, providing abstractions, systems, and operating software for the immense heterogenous fabric of co-processors, networks, and photonics that are critical to the success of our company’s goal of building the world’s first useful quantum computer. As a Senior Software Engineer, Calibration & Control you will design and implement algorithms, controls, and software that keep our quantum processors in spec 24×7x365. Responsibilities: The core of our system revolves around a high performance, scalable graph database which contains critical information to control and manage PsiQuantum computing systems. Your role is to scale and extend the current core database systems to support the massive increase in size complexity of our systems. Daily functions: Data systems design and implementation. Participate in design and code reviews. Collaborate across software, hardware, and research teams at PsiQuantum. Testing and maintenance of database software. Champion and serve as an exemplar of good software development practices at PsiQuantum. Experience/Qualifications: 15+ years experience with Python or C++ in a system software context. Design and implementation of large scale distributed storage systems, emphasis on graph databases. Proven track record of developing and shipping reliable, performant software in a high scale or mission critical context. Bachelors degree in a technical discipline preferred, or equivalent experience. Ways to stand out: Experience in graph database systems such as Nebula, neo4j. Experience in high performance computing and data design. Experience in computer architecture. Experience in high performance networking. Experience with highly scalable distributed systems in a reliability and up-time critical environment. PhD in a related technical discipline is a plus but not required. [We are open to adjusting the compensation to experience level] Note: PsiQuantum will only reach out to you using an official PsiQuantum email address and will never ask you for bank account information as part of the interview process. Please report any suspicious activity to _. We are not accepting unsolicited resumes from employment agencies. The ranges below reflect the target ranges for a new hire base salary. One is for the Bay Area (within 50 miles of HQ, Palo Alto), the second one (if applicable) is for elsewhere in the US (beyond 50 miles of HQ, Palo Alto). If there is only one range, it is for the specific location of where the position will be located. Actual compensation may vary outside of these ranges and is dependent on various factors including but not limited to a candidate's qualifications including relevant education and training, competencies, experience, geographic location, and business needs. Base pay is only one part of the total compensation package. Full time roles are eligible for equity and benefits. Base pay is subject to change and may be modified in the future. U.S. Base Pay Range $180,000 - $205,000 USD Bay Area Pay Range $200,000 - $220,000 USD

Interwell Health is a kidney care management company that partners with physicians on its mission to reimagine healthcare—with the expertise, scale, compassion, and vision to set the standard for the industry and help patients live their best lives. We are on a mission to help people and we know the work we do changes their lives. If there is a better way, we will create it. So, if our mission speaks to you, join us! As a Machine Learning Engineer, you’re a highly motivated individual with strong fundamentals in computer science and hands‑on experience across the full model development lifecycle—including feature engineering, model development, calibration, deployment, and ongoing monitoring. In this role, you will be flexible, eager to learn new skills, and willing to contribute wherever the team needs support. This Machine Learning Engineer is comfortable working with both traditional tabular machine learning models and modern AI techniques, including prompt engineering and LLM‑based capabilities. What You’ll Do • Develop and deliver end‑to‑end machine learning solutions, including defining technical requirements, architecting scalable systems, and implementing monitoring, logging, and maintenance workflows., • Collaborate closely with engineers, product managers, clinicians, and cross‑functional partners to build new ML products and enhance existing systems., • Lead the design and implementation of MLOps frameworks, including pipeline development, CI/CD integration, drift detection, retraining workflows, and rollback strategies., • Monitor model performance in production, identify issues, propose remediation steps, and ensure strong test coverage and system reliability., • Utilize contemporary software engineering practices to implement scalable, secure, and maintainable AI/ML systems., • Develop and customize API integrations to enable seamless connectivity between cloud‑based systems and ML services., • Participate in architectural discussions to ensure ML platforms meet compliance, performance, and scalability standards. What You’ll Need: • Bachelor’s degree in Computer Science, Data Analytics, Software/Computer Engineering, Computational Statistics, Mathematics, or a related discipline., • 3+ years of end‑to‑end ML development in production (data prep, feature engineering, modeling, calibration, deployment, monitoring, maintenance)., • 3+ years of MLOps experience building production pipelines (CI/CD, model registry, feature store), implementing monitoring & drift detection, and automating retraining., • 3+ years of Python for production ML (testing, packaging, type hints, linting) and SQL for analytical and production workloads; Scala a plus., • 2+ years working with distributed compute and cloud ML environments (e.g., Spark/Databricks on Azure/AWS/GCP) and modern data ecosystems (data lakes, DBMS)., • Strong debugging and optimization skills across data and ML workflows., • Track record of ownership and problem solving—driving measurable impact and quality under ambiguity and evolving requirements., • Ability to communicate technical decisions clearly and contribute to documentation and design discussions., • Demonstrated system design & architecture skills for scalable, high‑performance ML services and batch/streaming workflows; familiarity with API design and service integration patterns., • Proven understanding of tradeoffs in latency, cost, performance, and compliance. Preferred • 1+ years of Databricks experience + some experience in infrastructure/networking, • 1+ years implementing LLM‑based solutions in production (prompt/response design, evaluation frameworks, guardrails/safety, latency/cost optimization)., • 1+ years designing compliant ML platforms (e.g., HIPAA, SOC 2) and working with PHI/PII governance, access controls, and auditability. Our mission is to reinvent healthcare to help patients live their best lives, and we proudly live our mission-driven values: • We care deeply about the people we serve., • We are better when we work together., • Humility is a source of our strength., • We bring joy to our work., • We deliver on our promises. We are committed to diversity, equity, and inclusion throughout our recruiting practices. Everyone is welcome and included. We value our differences and learn from each other. Our team members come in all shapes, colors, and sizes. No matter how you identify your lifestyle, creed, or fandom, we value everyone's unique journey. Oh, and one more thing … a recent study shows that men apply for a job or promotion when they meet only 60% of the qualifications, but women and other marginalized groups apply only if they meet 100% of them. So, if you think you’d be a great fit, but don’t necessarily meet every single requirement on one of our job openings, please still apply. We’d love to consider your application! Come join us and help our patients live their best lives. Learn more at www.interwellhealth.com. It has come to our attention that some individuals or organizations are reaching out to job seekers and posing as potential employers presenting enticing employment offers. We want to emphasize that these offers are not associated with our company and may be fraudulent in nature. Please note that our organization will not extend a job offer without prior communication with our recruiting team, hiring managers and a formal interview process.

Key ResponsibilitiesPerform engine and powertrain testing using dynamometer (dyno) systems for gasoline, hybrid, and diesel enginesLead and execute engine calibration (tuning, mapping, validation) across multiple engine platformsDevelop and optimize calibration strategies for gasoline, hybrid, and d

Martin Motor Sports Llc is seeking a skilled engineer with expertise in engine dynamometer testing and calibration.

100% TELECOMMUTE We seek a talented Senior Data Engineer with ML feature engineering expertise to join our Consumer ML team. This role involves designing and implementing advanced feature engineering and ETL pipelines to enable robust machine learning applications. The ideal candidate has hands-on experience with Databricks, a deep understanding of the medallion architecture, and a proven track record of supporting the end-to-end ML lifecycle. Experience with MLflow and an aptitude for creating data-driven insights are highly desirable. Responsibilities: • Feature Engineering Data Integration Develop and maintain feature engineering pipelines using Databricks to support ML models effectively, • Data Pipeline Development Integrate diverse data sources eg clickstreams user behaviour demographic data to create user behaviour features profiles for complex ML tasks, • Medallion Architecture Design and implement ETL, ELT pipelines aligned with the bronze silver and gold layers of the medallion architecture, • Model Support Build data pipelines to support ML model training calibration and deployment leveraging MLflow for experiment tracking and performance monitoring, • Query Optimization Low Latency Pipelines Design low latency production ready data pipelines to support real-time and batch model inference, • CICD Practices Apply CICD principles for seamless pipeline deployment, • Data Governance Ensure pipelines comply with security and regulatory standards particularly for handling PII and maintain metadata and master data across the data catalogue, • Collaboration Work closely with ml scientists ml engineers and other stakeholders to align data transformation with business objectives Qualifications: • 7 years in data engineering and at least 4 years focusing on ML feature engineering ETL pipeline development and data preparation for ML, • Proven experience managing pipelines on Databricks using Apache Spark with a strong understanding of the medallion architecture, • Familiarity with ML lifecycle management with MLflow experience as a strong plus and advanced skills in Apache Spark PySpark for big data processing and analytics, • Proficient in Python for data manipulation and SQL for query optimization, • Experience building pipelines for real-time and batch model serving in production environments and knowledge of CICD practices for ETLELT pipeline development, • Expertise in metadata and master data management within technical data catalogues, • Understanding of data security and compliance especially with sensitive data like PII Mandatory Skills: Apache Spark, Databricks, Java, Python, Scala, SparkSQL Required Skills: Machine Learning Basic Qualification: Additional Skills: This is a high PRIORITY requisition.

Our ideal Senior Calibration Engineer Ideally a Technical qualification such as degree, HND, HNC, NVQ/BTEC Level 3 or above Knowledge of BS EN ISO/IEC 17025:2017 (preferred but not a requirement on this site) Good understanding of Windows-based (Excel and Word) and laboratory automation software Exp

A technology solutions company is seeking a Field Service Engineer to perform installation, maintenance, and repair of their products in various locations. The ideal candidate has a Bachelor's degree in Engineering or related field and 5-10 years of experience in laboratory troubleshooting. You will

A leading facility management firm in Union City seeks a CBRE Union Engineer responsible for site equipment maintenance and technical support.

Field Service Engineer for a remote position to install, calibrate, and support advanced testing systems nationwide. The role demands a Bachelor's degree in a technical discipline or equivalent hands-on experience, alongside technical troubleshooting and calibration skills.

Job DescriptionCustomer Support Specialist Are you the kind of person who genuinely enjoys solving problems, and wants to do it inside a company that's moving fast? Do you want to shape a function as it's being built, learn how a real AI product works, and be in the room when decisions get made? This is your chance to join a rocket ship. 🚀 🏗️ About the role We are looking for sharp, high-agency people to be the first line of support for our customers. You'll be joining the most lean, talent-dense, and fast-moving teams working alongside our attorneys, AI engineers, and GTM team to keep the bar on customer experience extraordinarily high. Our customers are patent attorneys at top law firms and in-house IP teams at some of the largest companies in the world. They are demanding, technical, and short on time. Today, a lot of their support tickets land on the desks of attorneys and engineers who should be building product. That doesn't scale, and it doesn't give customers the speed they deserve. You will fix that. You'll be responsible for: Owning the first response on every inbound support ticket, across email, in-app chat, and Slack Connect channels. Resolving the bulk of incoming tickets yourself: login issues, browser problems, account configuration, basic product questions, and walk-throughs of how to use Solve. Triaging and routing complex tickets to the right attorney, AI engineer, or GTM owner with enough context that they can act immediately. Building the playbook: writing the help docs, recording Loom walk-throughs, and turning recurring questions into self-serve answers so customers stop needing to ask. Feeding customer insights back into the product. You'll be sitting on the patterns nobody else sees, and we want you in the room when we decide what to fix next. Working closely with our customer-facing attorneys and CSMs to make sure customers feel looked after end to end. Helping us figure out what good customer support looks like at Solve, then making it real. This is a dedicated customer support role, the first of its kind at Solve. Some of the work is genuinely grunt work. The trade is that you get to shape how customer support runs at Solve, in a company where every hire is treated as a multiplier. 👤 About you We're open about your background. We’ve identified two profiles that may work well for this role: Engineering graduates or early-career engineers who want to support client success, triage requests with real technical depth, and use their engineering skills to accelerate Solve. Paralegals or legal operations specialists with IP or patent exposure, comfortable in technical environments, and ready to build something with real ownership. The common thread is having a builder mentality. You should be the kind of person who fixes the thing rather than logs it. Essential: Genuine interest in customer experience, and evidence you've cared about it before. This might be a startup you've worked at, a side project, or a role where you've owned support, customer success, or service delivery directly. Strong written communication. Most of your work will be written, and our customers are precise about language. High agency. You spot the gap, you close it. You don't wait for someone to tell you what to do. The ability to hold a high bar under pressure. Some tickets will be from senior partners at top firms. They expect speed, accuracy, and tone calibration. Nice to have: Paralegal qualifications or experience inside a patent practice (USPTO, EPO, or UK). Or a computer science, engineering, or hard-science degree. Experience with support tooling (Intercom, Zendesk, Linear, Pylon, or similar). Familiarity with AI products, prompt design, or evaluation workflows. Comfort with technical products. You don't need to code, but you need to be able to read a stack trace, understand what a browser console is telling you, and learn the inner workings of a complex SaaS product quickly. 💰 What we offer Competitive base salary depending on skill and experience. Significant equity — we want you to take ownership in Solve Intelligence and share in the success that lies ahead. Full visa sponsorship. Opportunity to work with a super smart and ambitious group of people building something people want. Private medical insurance. Free meals. 🚀 About Solve Intelligence Solve Intelligence is the fastest-growing startup transforming the IP landscape. Solve's AI platform manages everything from invention harvesting and patent generation through to litigation and licensing. Growth: 20–30% MoM revenue growth; selling to 600+ global IP teams across 6 continents (DLA Piper, tech giants, boutiques, etc); 8 figures of ARR — all just ~2 years since we started. Backing: $55M backing from YC, 20VC, Microsoft, Thomson Reuters, and the founders of top companies like Stripe, Perplexity, Tinder, Deel, Hugging Face, and Canva. Impact: 50–90% efficiency and quality improvements. See our latest Series B announcement. We're on a high-growth trajectory, and we're looking for people who want to join us on the journey to building a generational AI company. Come join the rocket ship 🚀 👥 Meet the founders Sanj (Chief Research Officer and co-founder): Sanj did his MSci in Physics at the University of Cambridge and his PhD in AI at the Gatsby Unit, UCL. He won awards at top AI conferences, worked on the R&D team at Huawei, and received widespread attention for his contributions to open-source LLM projects on GitHub. He joined Magic Carpet AI as employee #4, where he developed AI strategies for trading, before the company was acquired. Chris (Chief Executive Officer and co-founder): Chris did his undergrad at Imperial College London, his masters at the University of Cambridge, and his PhD in machine learning at UCL, during which he published 10+ papers and won awards at top AI conferences and journals. Prior to founding Solve, Chris worked at The Alan Turing Institute, InstaDeep, and Dyson. Angus (Chief Technology Officer and co-founder): Angus holds an MEng in Computer Science. He led trade platform development at Coremont after roles at GCHQ and Qualcomm. Compensation Range: £50K - £65K

MA/MS from an accredited college or university in engineering with 5 to 6 years in test engineering supporting DOD programs. DCS is searching for a performance-driven Test Engineer to support US Army programs. A focus on either Testing, Financial, logistics, engineering, technical support and/or man

United States, New York, New York.

We are looking to hire an Equipment Maintenance and Asset Calibration technician responsible to manage tracking, maintenance and calibration of all in-house production and engineering equipment. Revise class of use, shorten or extend calibration cycle intervals, recommend calibration service supplie

This paid apprenticeship offers mentorship and extensive training to master Advanced Driver Assistance System calibrations, providing solid career growth opportunities toward becoming a full Calibration Technician. Caliber Collision is looking for a highly talented Calibration Technician Apprentice

Building Maintenance Technician.Are you an experienced Maintenance Technician ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! Our Maintenance technicians are responsible for the maintenance operations related to apartment home upkeep and unit turns.M

Commercial Maintenance Technician - Part Time.We are an equal employment opportunity employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic prot

CRM Residential is a trusted and growing leader in affordable housing property management, committed to strengthening communities and elevating the places people call home.At the heart of our success are the people who choose to build their careers with us.We believe exceptional housing starts with

Currently, we are seeking a Field Service Technician to support our Montville, New Jersey location and surrounding areas.We offer tremendous opportunity for growth, competitive compensation and benefits for individuals who want a career with a great company that maintains a family feel!.Diagnose, re

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Lead G

Work closely with other maintenance technicians, engineers, and flight operations personnel to ensure seamless and efficient aircraft operations.

A Estes Backflow Testing LLC is hiring a Backflow Testing Technician in Georgia, specifically targeting candidates in Gwinnett or Cobb County.This role involves performing routine backflow testing and repairs, while ensuring safety and quality standards are met.The ideal candidate should possess str

The Maintenance Technician/Building Handyman will serve under the onsite Superintendent/Resident Manager, responsible for Repairs Facilities Maintenance, and Building Operations for a full service luxury residential rental building in Williamsburg, Brooklyn.Efficiently manage and respond to all buil

Corporate Facilities Maintenance Technician.Weekly pay + Medical Benefits).Long term Ongoing contract- no end date (Based on performance).Full- time M-F (8:30am- 5:30pm).Our client is passionate about building software that solves problems.They partner with the most important institutions in the wor

Responsible for maintaining, troubleshooting, and repairing equipment to ensure optimal performance and minimizing downtime.Additionally, this role includes performing certification training for other team members to enhance their skills and knowledge.Perform routine maintenance on mechanical and el

The Field Service Technician is responsible for inspecting, updating, and installing company product at the customer site on an as needed basis.They will assist in maintaining solid customer relations through quality installations, excellent customer service, and superb problem-solving skills.They w

Our Client's Global Field Service Department is looking for a dependable Field Service Technician team member.You will drive our exceptional customer service experience, improve customer satisfaction, maximize customer retention, and increase profitability.All experience levels are welcome to apply.

Engineer - Engineering Supervisor - Chief Engineer.

CRM Residential is a trusted and growing leader in affordable housing property management, committed to strengthening communities and elevating the places people call home.As we continue to expand our portfolio, we are focused on improving operational excellence across our properties-investing in up

From apartments in New York to hospitals and stadiums in Dallas, libraries at prestigious universities to creating modern retail experiences, our teams contribute architectural glass and building products to projects that shape the way people live, work, heal, learn, and play.At OBE, the work of our

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-ser

Property Maintenance Technician Level II or III at Marsden Services, L.Shifts: 8am-4:30pm Monday-Friday (40 hours per week).Location: Midtown Manhattan (One Property).Performing a variety of related duties including equipment installation, troubleshooting, repairs, and preventative maintenance in or

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-ser