Trabajos calibration engineer en Los Angeles, CaliforniaCrear alertas

Position Summary The Quality Manager is responsible for developing, implementing, and maintaining the Quality Management System (QMS) to ensure compliance with customer, regulatory, and industry requirements. This position provides leadership for all quality functions supporting the manufacture of aerospace aluminum sand castings, including Quality Engineering, Inspection, NDT, Calibration, and Special Processes. The Quality Manager partners closely with Operations, Engineering, Supply Chain, and Production teams to drive world-class quality performance, customer satisfaction, regulatory compliance, and continuous improvement. This position serves as the primary quality representative for customer, FAA, AS9100, and Nadcap requirements and is responsible for ensuring compliance with all applicable aerospace standards and customer specifications. Salary: $130K - $180K Essential Duties and Responsibilities • Manage and maintain the AS9100 Quality Management System., • Ensure compliance with customer, FAA, Nadcap, and regulatory requirements., • Lead and develop Quality Engineers, Inspectors, Technicians, and Supervisors., • Oversee quality compliance for special processes including Heat Treat, Welding, Mechanical Testing, and Non-Destructive Testing (NDT)., • Ensure compliance with Nadcap accreditation requirements and customer approvals for special processes., • Lead customer, internal, certification, and third-party audits., • Manage customer complaints, escapes, corrective actions, and root cause investigations., • Develop and monitor key performance indicators (KPIs), including:, • Scrap, • Rework, • Customer Returns (RMA), • Cost of Poor Quality, • Escapes, • Audit Findings, • Corrective Action Closure, • Lead corrective and preventive actions (CAPA) utilizing methodologies such as:, • 8D, • 5 Why, • Fishbone Analysis, • FMEA, • Statistical Analysis, • Review and approve quality procedures, inspection plans, work instructions, and quality documentation., • Partner with Operations and Engineering to improve casting yield, reduce scrap, eliminate defects, and improve process capability., • Support qualification and validation of new products, tooling, processes, and manufacturing methods., • Manage supplier quality performance and supplier corrective action activities., • Ensure calibration and control of all inspection, measurement, and test equipment., • Lead First Article Inspection (FAI) activities in accordance with AS9102 requirements., • Analyze quality data and trends to identify opportunities for continuous improvement and cost reduction., • Provide training and development for quality personnel and cross-functional teams., • Support contract review and customer-specific quality requirements., • Promote a culture of quality, accountability, and continuous improvement throughout the organization., • Maintain compliance with all company safety and environmental policies. Qualifications Education • Bachelor's degree in Engineering, Metallurgy, Manufacturing, Quality, or a related technical discipline preferred., • Equivalent combination of education and experience may be considered. Experience • Minimum of 7 years of quality experience in aerospace manufacturing, foundry operations, aluminum sand castings, precision machining, or related industries., • Minimum of 3 years of leadership experience managing Quality Engineers, Inspectors, Technicians, and Supervisors., • Demonstrated experience maintaining and improving AS9100-certified Quality Management Systems., • Experience leading customer, regulatory, and third-party audits., • Experience supporting or managing Nadcap-accredited special processes., • Proven experience leading corrective action, root cause analysis, and continuous improvement initiatives., • Strong customer-facing experience supporting aerospace OEMs and Tier 1 suppliers. Knowledge, Skills, and Abilities • Thorough understanding of AS9100, AS9102, FAA requirements, and customer-specific quality requirements., • Working knowledge of Nadcap requirements for Heat Treat, Welding, Mechanical Testing, and NDT., • Strong understanding of aluminum sand casting processes, casting defects, metallurgical evaluations, and process controls., • Ability to interpret engineering drawings, specifications, and GD&T requirements., • Knowledge of SPC, MSA, FMEA, Control Plans, and Process Capability Studies., • Strong analytical and problem-solving skills., • Effective leadership and team development capabilities., • Excellent verbal and written communication skills., • Ability to communicate effectively with customers, auditors, and executive leadership., • Proficiency with Microsoft Office and ERP/MRP systems., • Ability to manage multiple priorities in a fast-paced manufacturing environment. Preferred Certifications • ASQ Certified Quality Manager (CMQ/OE), • ASQ Certified Quality Engineer (CQE), • Six Sigma Green Belt or Black Belt, • AS9100 Lead Auditor Certification Preferred Experience • Aerospace aluminum sand casting experience., • Experience managing Nadcap audits and customer special process approvals., • Experience supporting aerospace customers such as Lockheed Martin, Collins Aerospace, Pratt & Whitney, Honeywell, Safran, GE Aerospace, Rolls-Royce, and RTX., • Experience managing Heat Treat, NDT, Metallurgical Laboratory, Calibration, and Welding quality functions. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/. Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act. This is a management position This is a full time position Pay Range:

Optical Systems Engineer (Hybrid work schedule) (Location: Glendale/Pasadena, CA area) Relocation package is available. Job Description: Client is looking for a highly qualified Optical Systems Engineer to develop and maintain Natural Seeing/Ground Layer Adaptive Optics (NS/GLAO) technical budgets and requirements relevant to the optical performance of the Client’s telescopic products. The Optical Systems Engineer (OSE) will prepare and maintain observatory level requirements and technical budgets including the allocation of requirements to subsystems and components, and monitor and evaluate the predicted performance of the Observatory during the design and construction phases. The OSE will be reporting to the Project Systems Engineer, working under minimal supervision. S/he will maintain optical performance estimates relative to a subset of requirements known as Key Performance Parameters (KPPs). Monitoring and updating KPPs will occur in close collaboration with the Wavefront Control and Integrated Modeling teams. The Optical Systems Engineer will also contribute to interface development and participate in the development and execution of verification and validation plans and procedures, in collaboration with the rest of the Systems Engineering team and the engineering teams responsible for delivering subsystems. The Optical Systems Engineer will work closely with the Chief Scientist, Project Scientist, Instrument Scientist, instrument teams, and wavefront controls group and Systems Engineering group to interpret science requirements and flowing them down into technical specifications. The Optical Systems Engineer is expected to possess extensive working knowledge of the optical effects in the atmosphere, the performance metrics typically used to characterize a ground-based observatory, and the concepts and algorithms capable of estimating those metrics. The successful candidate will have practical understanding of the physical effects influencing performance, as well as the analytical and numerical models characterizing these effects. While most of the detailed modeling and simulation work will be carried out by dedicated teams, the Optical Systems Engineer must be competent with commercial programming languages and optical design and modeling tools. This position will require writing reports to summarize work accomplished and to document technical specifications, requirements, and procedures in support of internal and external design reviews. Additional responsibilities will include efficient communication with the systems engineering team, engineers throughout the project, sub-system leaders, and project management. Job Duties Establish and maintain observatory (system) level optical requirements, and technical budgets. These include, but are not necessarily limited to, requirements for NS/GLAO Image Quality/Normalized Point Source Sensitivity (IQ/PSSN), spatial uniformity, PSSN Temporal Stability, Pupil Stability, and Stray light requirements rooted in each of the system level budgets, their ties to science requirements, and their translation to engineering units. Management of KPPs including calculating KPP thresholds based on an assessment of technical risk to the project and Monte Carlo simulation, and the assessment of change impacts at the system level including rebalancing of budgets or accessing reserve. Establish the process and methods for continuously evaluating observatory optical performance, as part of the evolving System Compliance Matrix; coordinate adding as-designed/as-built models to simulations to ensure that the final design meet performance requirements. Contribute to the development of calibration and test plans, as necessary Review and coordinate subsystem level optical requirements, technical budgets, interfaces, and V&V plans. Monitor, review and confirm the analyses of the observatory subsystems performed by the engineering teams and contractors. Prepare reports, technical notes, and publications on observatory performance and related areas. Contribute to system and subsystem level design reviews. Other duties as assigned. Essential Skills, Experience & Knowledge Minimum of a M.S. in Physics, Astronomy, Optical Sciences or related engineering degree with a minimum of 6 years of relevant experience. Good understanding of optical concepts and test procedures. Good understanding of ground or space-based observatory performance, relevant metrics and algorithms evaluating those metrics. Ability to work independently and manage diverse work load to meet critical deadlines Good working knowledge of Matlab/Simulink, Python, or IDL Competent use of Zemax. Excellent verbal, presentation and writing skills, demonstrated ability of generating comprehensive reports and publications. Previous experience presenting reports and providing documentation for design reviews Previous experience working as a member of a project team with engineers, scientists and scientific personnel. Demonstrated interpersonal skills: well organized, reliable, and proactive in dealing with others. Demonstrated ability to be flexible in an environment of changing priorities and working on multiple areas of the project Desired Skills & Experience M.S. in Physics, Astronomy, Optical Sciences or related engineering degree with a minimum of 8-10 years of relevant experience. Experience with large ground-based observatories, including optical alignment processes for ground or space-based telescopes. Experience with astronomical active and/or adaptive optics, optical/IR astronomical instrumentation, systems and subsystems. Featured Benefits Medical insurance Vision insurance 401(k) Dental insurance Disability insurance An annual performance bonus may be offered based on meeting company-wide and personal objectives (not guaranteed).

Sales - Aftermarket CNC Tooling - Glendale, CA Sales Account Manager Representative Marketing Sales Engineer Business Developer CNC Machine Tools Machining Centers Lathes Mills Grinders Tooling Machinery Fanuc Okuma Yasda Nakamura Makino Mazak Haas Mori Seiki Moriseiki . REGIONAL TRAVEL - WORK FROM HOME Conduct profitable aftermarket sales activities for CNC Machine Tools, Machining Centers, Robots and Tooling for high and low volume manufacturing and part fabrication applications. Activities: • Manage existing relationships and proactively sell new systems or upgrades. • Interface with customers to handle questions or complaints, and explain Aftermarket Sales Services offered such as upgrades, warranties, calibration and maintenance programs, re-tasking and retooling consultations, spare parts, etc. • Conduct market research to identify new avenues for revenue generation and market growth. • Give direction to field service team regarding service contracts, upgrades, and spare part sales. Competitive compensation and benefits package including medical, health, dental, and vision coverage. High earning potential with salary, bonuses, and incentives. Competitive 401(k) match, travel expense account, and ability to interact with key customers all over the globe. Employee centered work environment with brand new facilities and 'quality of life' focus with fantastic work-life balance. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: http://dmc9.com/cam/app.asp Or email to: 100007073510007349@najbcareers303.com Please reference #42601CA1 when responding. Diedre Moire Corporation Education Requirements: High School Minimum Experience Requirements: 5-10 years Job City Location: Glendale Job State Location: CA Job Country Location: USA Salary Range: $80,000 to $300,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Sales Account Manager Representative Marketing Sales Engineer Business Developer CNC Machine Tools Machining Centers Lathes Mills Grinders Tooling Machinery Fanuc Okuma Yasda Nakamura Makino Mazak Haas Mori Seiki Moriseiki #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #cncjobs #engineeringjobs #salesengineer #salesjobs #ManufacturingJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to pleaseremove@candseek4.com Or, visit the website at www.jobbankremove.com. If you have further concern regarding email received from us, call (609) 584-5499

Cutting Edge Space & Defense Products! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $46 per hour A bit about us: With numerous offices across the country we are a $300M+ TOP Ranked Space Hardware Development company with clients like NASA! If you are an experienced Quality Admin or Inspector looking to take their career to the next level, then please apply! Why join us? Do you want to work with some of the nation’s best clients like NASA and Boeing? We do too! • Meaningful Work!, • Best in Class Firm!, • Gold Level PPO Heath Insurance - 75% Covered!, • Competitive Compensation Package!, • Benefits Package!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Responsibilities: 1. Oversee the coordination, supervision, and operation of specific quality management system tasks and functions., 2. Ensure training, education, auditing, calibration, supplier quality assurance, continuous improvement, and other related activities are carried out in line with our quality management system., 3. Prepare and provide written quality management system management plans, instructions, task status analysis, cost reports, and other related documents., 4. Perform receiving inspection of purchased parts and subassemblies, verifying supplier compliance with all purchase order requirements, specifications, and/or drawing requirements., 5. Ensures all administrative tools are effectively used to control and accomplish tasks., 6. Assists with writing procedures and other documentation., 7. Responsible for status and task management reports for areas of responsibility. As a Back-up Inspector: • Performs receiving inspection of purchased parts and subassemblies. Verifies supplier compliance with all purchase order requirements, specifications and/or drawing requirements., • Performs dimensional inspections using hand-held instruments to measure parts and assemblies to drawing requirement., • Performs in-process inspections of assembled hardware per drawing requirements, verifies accuracy of entries on data sheets, work orders, adhesive mixes, and other data-keeping systems., • Performs finals inspections of assembled hardware per drawing requirements and is the liaison to the program Quality Engineer (Reports quality problems or findings to the QE). Assists Quality Engineering and Operations in the investigation of non-conformities., • Accurately documents the results of the inspections., • Performs quality review of work orders prior to their closure to verify count and condition of parts or assemblies, that all operations are complete, that associated kit lists are accurate, that parts are correctly labeled; and assists the Quality Engineer (as needed) to collect data for the assemblies End Item Data Package., • Performs source inspections at sub-tier suppliers, as needed. Qualifications: • General knowledge of manufacturing and quality processes and methods., • 4+ years working experience with quality management systems, e.g. AS9100 / ISO9001 requirements. Esp. training, education, auditing, supplier quality assurance, continuous improvement, and calibration., • 3+ years of work experience with quality inspection, preferably in a high reliability, small batch, high variety manufacturing environment., • Experience with training and education in quality management systems, quality control, and manufacturing environments., • Experience with conducting quality management system audits. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Summary: We are seeking a highly experienced Quality Engineer with strong expertise in Non-Destructive Testing (NDT Level II/III), mechanical laboratory testing, and dimensional inspection within an OEM manufacturing environment. The role is responsible for ensuring product quality, compliance with engineering standards, and execution of advanced inspection and testing activities to support production and customer requirements. Key Responsibilities: • Perform and supervise NDT inspections (UT, RT, MT, PT as applicable) in accordance with relevant codes, standards, and customer specifications., • Interpret inspection results, prepare reports, and ensure proper documentation and traceability., • Conduct mechanical testing of materials and components, including tensile, hardness, impact, and other destructive testing methods., • Carry out dimensional inspections using precision instruments such as CMM, vernier calipers, micrometers, height gauges, and gauges as per engineering drawings., • Ensure compliance with OEM quality requirements, internal quality systems, and industry standards (ISO/ASME/ASTM or applicable)., • Support root cause analysis (RCA), corrective and preventive actions (CAPA), and continuous improvement initiatives., • Collaborate with production, engineering, and supplier quality teams to resolve quality issues., • Maintain calibration records, inspection reports, and quality documentation., • Lead or support audits (internal, customer, and third-party) when required., • Train and guide junior inspectors and technicians in quality procedures and inspection methods. Requirements: • Minimum 5 years of experience in Quality Engineering, NDT, mechanical testing, or dimensional inspection., • Valid certification in NDT Level II or Level III (preferred depending on role responsibility)., • Strong knowledge of mechanical testing standards and inspection techniques., • Hands-on experience with precision measuring instruments and CMM operations., • Experience working in OEM or high-precision manufacturing environment., • Strong understanding of engineering drawings and GD&T., • Good documentation, analytical, and problem-solving skills.

Media Systems Engineering, Regional Engineer Media Systems Engineering helps filmmakers bring their vision to life, through the design and support of all technical workstations, image & sound equipment, and playback systems currently in use across all creative spaces. That includes screening rooms, post-production suites, QC environments, audio facilities, and specialty creative spaces that power content creation from capture through delivery. You will work at the intersection of creative intent and technical excellence, partnering closely with the Global Media Systems Engineering team to spearhead new technology deployments across the corporate and studio portfolio. Role Overview We are seeking a Media Systems Regional Engineer to join our Global Media Systems Engineering team. In this role, you will serve as a regional anchor for a globally aligned Engineering organization—ensuring that creative and technical spaces operate reliably, consistently, and to the highest industry standards This role requires strong technical depth, calm execution under pressure, and the ability to work autonomously while remaining tightly connected to the rest of our team. Responsibilities Technical Support & Infrastructure • Maintain and troubleshoot complex audio, video, and networking systems across post-production facilities, theatrical screening rooms, QC environments, and creative spaces., • Perform routine and emergency audio and video calibrations to ensure compliance with company, theatrical, and broadcast standards., • Partner with internal network engineering teams to troubleshoot high-performance media and corporate networks, ensuring reliable A/V transport, data flow, and remote access., • Support post-production pipelines and video encoding workflows, enabling creative teams to deliver world-class content without friction. Operations & Regional Execution • Act as the primary regional point of contact for Media Systems Engineering, providing remote, on-site, or vendor-managed assistance as required., • Triage technical issues, drive resolution, and escalate to specialized global teams when appropriate., • Help define and uphold service level agreements (SLAs), escalation paths, and on-call or coverage models for critical rooms, screenings, and live events., • Coordinate with external vendors to manage hardware lifecycles, maintenance, • agreements, and service expectations. Collaboration & Continuous Improvement • Partner closely with the global Media Systems Engineering team across all regions to ensure consistent tooling, behaviors, and support standards worldwide., • Create and maintain clear documentation including SOPs, runbooks, and troubleshooting guides, keeping them current as systems evolve., • Proactively identify opportunities to improve system reliability, operational efficiency, and the overall support experience., • Operate autonomously within your region while maintaining transparency through documentation, reporting, and global syncs. We Value • Calm, professional judgment—especially in high-pressure or high-visibility situations with creative stakeholders., • Strong customer service instincts and the ability to translate complex technical issues for non-technical audiences., • Ownership mindset and accountability for outcomes, not just activity., • Collaborative behavior across cultures, time zones, and technical disciplines., • Strategic thinking that balances immediate fixes with long-term architectural improvements. Skills & Experience • 5+ years of experience supporting post-production, studio, or creative technology infrastructure. Technical Expertise You are not expected to have used every tool listed, but you should bring deep troubleshooting ability and the curiosity to learn quickly. Theatrical & Screening Environments • Experience with DCP systems including installation, commissioning, calibration, and maintenance., • Strong knowledge of cinema audio systems, including Dolby Atmos, SMPTE standards, and calibration., • Live Events & Production Systems, • Hands-on experience with digital audio mixers, wireless microphones, camera routing, playback/record systems, and comms infrastructure. Audio Production Environments • Operational knowledge of Avid S6 consoles, Adder KVMs, and digital audio protocols (Dante, AES67)., • Expertise in audio calibration for near-field mix rooms, home theaters, music rooms, and screening environments., • Understanding of acoustic principles for production and cinema spaces. Post-Production & Creative Workflows • Support experience across ADR stages, edit suites, QC bays, dailies labs, screening lounges, podcast studios, and gaming/streaming rooms., • Expert-level troubleshooting of post-production software and systems (Avid, Adobe, Resolve, Pro Tools, Transkoder). Networking & IP Media • Strong understanding of network design, VLANs, subnets, clocking (PTP), and switch infrastructure., • Proficiency with A/V over IP standards including Dante, AES67, ST 2110, and NDI. Pay Rate Range • $85-100/hr.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role: The Senior NDT Engineer – Level III serves as the technical authority for the nondestructive testing (NDT) program, ensuring compliance with applicable regulatory, contractual, and quality system requirements. This position provides governance, oversight, and technical leadership in a highly regulated manufacturing environment supporting mission-critical programs. What You’ll Do Lead development, review, approval, and control of NDT procedures and technique sheets to ensure alignment with applicable codes, standards, and customer requirements. Oversee program governance including revision control, configuration management, documentation integrity, and personnel qualification tracking. Maintain oversight of calibration systems, equipment traceability, and certification compliance. Lead audit readiness efforts and serve as technical representative during internal and external audits. Provide technical review, complex inspection support, and mentorship to Level I and II personnel while driving continuous improvement within the NDT program. What We’re Looking For Minimum 10 years of progressive experience in nondestructive testing, including demonstrated program oversight and procedure development. Current Level III certification in at least four methods: MT, PT, RT, UT, and VT. Experience operating within a regulated quality environment requiring strong documentation control, traceability, and audit support. Demonstrated ability to interpret and apply technical codes, standards, and contractual requirements to compliant procedures. Experience leading or supporting external audits within structured quality management systems. What Will Set You Apart Experience supporting NAVSEA or aerospace programs with comparable regulatory and compliance requirements. Experience in high-consequence manufacturing environments such as defense, aerospace launch, propulsion, or similarly rigorous technical sectors. Exposure to automated, robotic, or advanced NDT inspection systems. Familiarity with digital inspection platforms or electronic quality management systems. Compensation For this role, the target salary range is $180,000-$205,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. We’re looking for a hands-on systems engineer who can take metal additive manufacturing equipment from standalone machines to fully integrated, automated production systems. This is the hands-on AM technical authority on the team. You will lead the commissioning, qualification, and production readiness of all PBF-LB systems executing FAT, SAT, IQ, and OQ protocols against the Hadrian standard, owning machine-level reliability programs, and serving as technical interface to OEM field engineers. You will also own cell-level P&IDs and support automation integration, ensuring every machine is production-ready by end of year. RESPONSIBILITIES: Systems Integration and OPUS Enablement: Execute the end-to-end integration of metal AM machines, peripherals, and cell infrastructure into OPUS, Lead FAT and SAT for all incoming PBF-LB systems against Hadrian acceptance criteria — coordinating OEM field engineers, documenting results, and driving resolution of open items to production release. Integration Architecture and Standards: Define system requirements, interface control documents (ICDs), integration kits, and machine acceptance criteria that scale across multiple OEMs, configurations, and sites. Commissioning, FAT/SAT, and Qualification Support: Build and own factory acceptance test (FAT) and site acceptance test (SAT) playbooks, commissioning checklists, and validation plans. Partner with Quality and Process teams to ensure integrated systems support qualification and production release. Reliability, Maintainability, and Uptime: Experience reliability engineering discipline for AM equipment (PM strategy, spares, calibration, MTBF and MTTR tracking, failure mode mitigation). Ability to structured root cause and corrective action with OEMs and internal teams. Machine Modification and Performance Upgrades: Lead efforts to implement hardware, firmware, and configuration improvements that increase build envelope utilization, process stability, and throughput (for example gas flow, recoater systems, calibration, and motion subsystems), while maintaining configuration control. Manufacturing Controls and Documentation: Own standard work for machine operation and integration points, including equipment control procedures, safety interlocks, change control, and training. Ensure readiness for regulated environments and customer audits. Cross-Functional Execution: Partner tightly with Additive Manufacturing, Materials and Process, Manufacturing Engineering, Software, Quality, Supply Chain, and Operations to industrialize solutions and deliver production commitments. PREFERRED QUALIFICATIONS AND SKILLS: Bachelor degree in Mechanical Engineering, Materials Engineering, Manufacturing Engineering, or related field Master’s degree is a plus. 5+ years of experience in metal additive manufacturing systems engineering, equipment engineering, automation, or factory-scale integration, with deep familiarity in metal LPBF. Hands-on knowledge of metal LPBF machine architecture and key subsystems including powder handling, optics, motion, recoater, build plate handling, atmospheres and gas flow, sensing and monitoring, and post-build workflow. Experience reading, redlining, and maintaining P&IDs for process utility systems in a manufacturing environment Familiarity with reliability engineering fundamentals — PM program design, MTBF/MTTR analysis, and structured problem-solving Experience managing OEM relationships and coordinating commissioning across multiple machine platforms Experience deploying automation in production manufacturing environments, including safety, interlocks, commissioning, and sustaining engineering. Strong problem-solving using structured methods (8D, 5 Whys, fishbone) and proven ability to drive corrective and preventive actions to closure. Willing to travel up to 20%, including international supplier visits.; U.S. Citizen or Permanent Resident (required for ITAR compliance). COMPENSATION: For this role, the target salary range is $150,000 - $220,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionQuality Engineer - Industrial Automation Title: Quality Engineer Location: Camarillo, CA (on-site) Annual Salary: $75,000 - $100,000 We are seeking an experienced Quality Engineer to act as a key liaison between the company and customers on technical and quality-related issues. Our products support a wide range of industries, including manufacturing, entertainment, robotics, defense, medical technology, and more. In this role, you will support manufacturing and engineering teams to resolve product quality concerns, drive corrective actions, and recommend improvements to production processes. You will also support the Quality Management System to ensure compliance with ISO standards, maintain documentation, and monitor risk activities across the organization. Key Responsibilities • Develop and implement quality standards and procedures, • Monitor and analyze quality performance metrics, • Develop corrective actions, solutions, and product improvements, • Investigate and resolve product or production issues, • Participate in continuous improvement initiatives, • Perform or support internal company audits, • Provide IPC training and serve as a technical resource, • Maintain records, non-conforming material processes, and calibration schedules, • Support safety committee activities, • Collaborate with colleagues, suppliers, customers, and management Required Qualifications • Bachelors degree in a science or technical field, • Minimum 3 years of industrial experience, preferably in high-volume manufacturing, automation, or quality engineering, • Working knowledge of ISO 9001 2015, IPC 600, IPC 610, and J-STD-001, • Experience with 8D methodology and data-driven quality improvements, • Experience with ERP PLM systems such as Microsoft Dynamics or Omnify Empower a plus Benefits • $75,000 - $100,000, • Standard paid company holidays, • Paid time off (PTO) and sick leave, • Medical, dental, and vision insurance, • 401(k) retirement plan, • Employee training and development opportunities - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 06/10/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications, and a virtual recruiter as part of the application process. A human recruiter reviews all results. Click here for details on our virtual recruiter . Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

Job DescriptionDescriptionAs a Guidance, Navigation, and Control Engineer (Optical Systems) at Impulse Space, you will own all aspects of and provide outstanding technical contribution to star trackers and optical navigation systems in all phases of development and operation while working closely with a fast paced, agile team. Responsibilities • Implement GNC flight, analysis, and test artifacts for high-performance GNC-adjacent optical systems produced at scale, • Develop robust identification, attitude resolution, and object detection algorithms for star trackers and other imaging systems, • Support relative navigation through imaging systems, • Quantify and verify expected sensor performance via first-principles, simulation, and hardware verification, • Contribute to vehicle-level attitude determination improvements and analyses, • Participate in software development, both flight code and simulation, • Create tools for ground and on-orbit development, alignments, and verification, enabling new iterations and design decisions to be realized quickly, • Resolve technical issues with innovative, resourceful solutions, • Communicate design needs, intent, and capability to the broader engineering team, • For Senior and higher, mentor other engineers and define the best practices for sensor-level design and integration into space vehicles Minimum Qualifications • Bachelor's degree in engineering discipline, • 2+ years of experience in image processing and optical analysis, • Proficiency in Matlab and C++, • Demonstrated experience with camera systems and fundamentals of attitude determination, • Experience with sensor noise modeling, photometric calibration, or low-light imaging Preferred Skills and Experience • Master’s or PhD in aerospace, electrical, computer science, or related degree, • Strong mathematical background in Kalman filtering and probability analysis, • Demonstrated experience in developing star tracker starlight-in-quaternion-out algorithms, • Experience with ground-based testing of optical systems, • Experience with computer vision, machine learning, or pattern recognition in imaging systems, • Experience in a startup or agile development environment, • Experience in spacecraft GNC fundamentals and vehicle interactions with high-performance optical systems Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule: This is a 4x10 shift schedule.Shifts Available:Sun - Wed 1st shift (5am - 4pm) Wed - Sat 1st shift (5am - 4pm) Purpose Divergent is on the lookout for an adept and driven Service Specialist dedicated to the maintenance and enhancement of our current and forthcoming Additive Manufacturing (AM) equipment. We are committed to setting a new benchmark in aerospace and automotive manufacturing, and we need a proactive team member to help us redefine the future of manufacturing and automation. The Role • Maintain, enhance, and operate metal powder bed fusion additive manufacturing machines, ensuring optimal part quality, machine uptime, and production throughput within set schedules., • Conduct scheduled preventative maintenance on machinery and equipment to uphold operational efficiency., • Perform unplanned mechanical and electro-optical repairs, as well as machine optimizations and intra-facility equipment relocations., • Proficiently diagnose intricate electrical and mechanical issues, meticulously document root causes of failures, and drive effective corrective actions., • Execute complex optical and mechanical calibration procedures to uphold precision standards. Swiftly troubleshoot and rectify mechanical issues to minimize production downtime., • Work with Programable Logic Controllers (PLCs) for automated systems., • Communicate machine status effectively, along with estimated repair timelines., • Conduct routine inspections to preempt potential maintenance requirements., • Utilize precision measuring instruments to ensure the accuracy of repairs., • Interpret schematics for troubleshooting purposes. Adhere strictly to safety protocols., • Support performance enhancement initiatives within the production department and contribute to continuous improvement and quality programs (e.g., AS9100, IATF 16949, etc.)., • Assist in developing training programs, crafting work instructions, standard operating procedures, and provide guidance to other team members on machine maintenance tasks., • Undertake additional responsibilities as required to meet departmental objectives.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • A Bachelor's degree in a technical field or Associates degree in a technical field and equivalent maintenance technician work experience. Strong equivalent maintenance technician experience may be considered in lieu of educational requirements., • Automation and machine control experience with demonstrated troubleshooting capabilities., • Mechanical and electrical troubleshooting and repair experience., • Interest and ability to work hands-on with additive technology: working with the machines, systems, and processes in a factory environment., • Highly self-motivated and able to prioritize and execute tasks in a fast paced, startup manufacturing environment., • Strong ability to think and work autonomously when required, and to perform under pressure to logically troubleshoot systems and processes., • Ability to effectively use a wide variety of hand tools and test equipment., • Proficient verbal and written skills especially related to technical records, documentation, and presentation., • Solid interpersonal skills, capable of working within a small, growing team and interfacing with engineering and manufacturing groups to understand the production system and the associated constraints.Preferred Qualifications, • Experience with metal (or other) Additive Manufacturing (AM) processes and additive manufacturing equipment, such as, SLM Solutions, EOS, RenAM, or Velo3D machines is a plus but not a requirement for consideration.Work Environment, • The person in this position needs to frequently work in a factory environment to access and repair machinery (up to 100%), • Ability to walk, kneel, reach, climb, use hands to operate machinery in an industrial production environment, as required., • Ability to lift up to 30 lbs., as required to execute a repair.Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels S04 - S05 as evaluated through our interview process. • Specialist 4 / S04: $48.15 - $66.21, • Specialist 5 / S05: $55.61 - $76.46 Veterans and candidates with military technical backgrounds in aviation, aerospace, maintenance, robotics, electronics, machining, or industrial operations are encouraged to apply. Pay Range$48.15—$76.46 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose This role serves as the technical bridge between design/manufacturing engineers and the production team, with a core focus on developing scalable, high-reliability automated, machining, & inspection processes. This person is responsible for driving process improvements, solving complex production challenges, and helping to eliminate part flow blockers. Rather than simply supporting products, this engineer leads process innovation enabling rapid iteration, increasing production efficiency, and helping scale Divergent's capabilities to meet program demands. The Role As the Senior Advance Manufacturing engineer, you will lead the development, execution, and continuous improvement of day-to-day operations for machining, automated assembly, automated anodize, inspection, & cleaning work centers. You'll be one of the primary technical resources supporting these areas with troubleshooting production issues, refining the processes, and enabling scalability through smart programming, tooling/fixturing, documentation, and workflow improvements. This role is hands-on, fast-paced, and essential to delivering high-precision, high-reliability hardware across automotive, aerospace, and defense programs. The ideal candidate is well versed in aerospace production environment and has direct experience with supporting the production floor, DFM, machining, assembly, coating, metrology, & thrives on solving complex shop floor problems, and brings a strong process mindset to drive quality, speed, and consistency. Key Responsibilities Operations Support • Own daily production execution, working directly with production floor to resolve issues, and ensure steady throughput., • Develop and implement best practices, processes, strategies, and calibration procedures to improve operational capacity., • Monitor utilization and WIP flow through the work centers, help push/pull work as needed to maintain alignment with production targets. Technical Execution • Act as the technical bridge between design/manufacturing engineering and production teams., • Lead development, execution, and continuous improvement of machining, automated assembly, automated anodize, inspection, and cleaning work centers., • Collaborate on programming for 3-axis, 3+2, and 5-axis CNC mills using Siemens NX CAM software., • Provide feedback using advanced understanding of GD&T, tooling, feeds/speeds, and fixturing., • Introduce standardized strategies, programming conventions, and setup documentation to improve consistency and reduce cycle time., • Leverage metrology and inspection expertise to drive quality assurance in production. Process Development & Scalability • Help lead efforts to integrate new machines, equipment, tools, and fixturing into production; support commissioning., • Co-Drive design-for-manufacturing (DFM) conversations with Manufacturing engineering to improve part manufacturability and reduce complexity at the machine., • Develop and implement innovative fixturing strategies tailored for complex additive manufactured geometries., • Support integration of automated machining technologies to enhance scalability and precision. Continuous Improvement & Documentation • Analyze data to identify trends, inefficiencies, and root causes of scrap or delays; implement corrective actions and process improvements., • Create and maintain detailed documentation to ensure consistency and repeatability across shifts and teams., • Collaborate with software and data teams to integrate production metrics and feedback loops into real-time dashboards and planning systems. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering, or equivalent hands-on experience, • 8+ years of experience in aerospace or defense industries., • Hands-on experience with advanced manufacturing techniques, including additive manufacturing, robotics, coatings, & inspection/quality, • Direct experience with machining, additive manufacturing, coatings, & inspection/quality., • Proficiency in CAD/CAM software (e.g., Siemens NX, AutoCAD,), • Advanced knowledge of CNC machining, structure assembly, GD&T, tooling, & metrology., • Experience evaluating, selecting and commissioning of machines to meet manufacturing capabilities., • Excellent problem-solving skills and ability to innovate in a fast-paced environment., • Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams., • Ability to work on multiple projects and initiatives in parallel Preferred Qualifications, • Master's degree in mechanical, manufacturing, or aerospace engineering., • Experience with robotic machining systems and calibration methodologies, • Experience with manufacturing automation in automotive or aerospace environments Work Environment, • This is a hands-on position that will require standing for long durations of your day and working directly with hardware on the floor., • Must be comfortable stooping, bending, and standing., • Position may require occasional travel, long hours or weekend work. Compensation, • Senior Engineer / E05: $122,400 - $168,300Pay Range$91,800—$168,300 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionDescriptionAs an Embedded Software Engineer for Image Processing Algorithms at Impulse, your primary responsibility will be to design, implement, validate, and maintain onboard image processing software for spacecraft systems. You will work at the intersection of embedded software, imaging sensors, numerical algorithms, estimation, and guidance, navigation, and control systems. You will collaborate closely with avionics, flight software, GNC, test, and mission operations teams to deliver reliable image processing software capable of operating on microcontroller-class hardware in demanding space environments. Responsibilities • Develop onboard computer vision algorithms for image preprocessing, thresholding, filtering, centroiding, feature extraction, target detection, target tracking, optical navigation, star detection, and attitude or pose estimation support., • Support image conditioning techniques such as calibration, distortion correction, dark-frame correction, thresholding, exposure control, filtering, and image normalization., • Work with GNC, flight software, and mission teams to define algorithm performance requirements, including accuracy, latency, update rate, robustness, fault tolerance, and compute/resource constraints., • Develop test tools, simulation environments, and analysis scripts to evaluate algorithm performance using synthetic imagery, lab imagery, ground test data, and flight-like datasets., • Debug and tune vision software during sensor bring-up, ground testing, environmental testing, and in-flight operations., • Contribute to fault detection, robustness, and recovery logic for cases such as poor lighting, stray light, saturation, blur, dropped frames, hot pixels, occlusions, image noise, and unexpected scene content., • Design algorithms and data pipelines that operate within constrained CPU, memory, storage, bandwidth, timing, and power budgets. Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or related technical field., • 2+ years of experience writing C++ code for embedded systems, preferably in imaging or robotic applications., • Experience implementing image processing, estimation, numerical, or signal processing algorithms., • Experience with bare-metal or RTOS-based software development. Preferred Skills and Experience • Ability to work closely with hardware, flight software, GNC, and test teams to diagnose issues across software, sensors, timing, image quality, and system interfaces., • Experience optimizing software for runtime, memory usage, deterministic execution, and numerical stability., • Familiarity with low-level hardware interfaces such as SPI, I2C, UART, GPIO, timers, ADCs, DMA, and camera or image sensor interfaces., • Strong understanding of linear algebra, coordinate frames, rotations, quaternions, camera models, or geometric vision concepts., • Experience debugging embedded systems using oscilloscopes, logic analyzers, hardware debuggers, source-level debuggers, logs, and telemetry., • Hands-on experience developing or testing computer vision, optical navigation, star tracker, pose estimation, target tracking, inspection, or perception algorithms on microcontroller-class hardware. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionQuality Engineer WET (Design) – Sun Valley, CA At WET, we create some of the world’s most iconic water features, blending art, engineering, and imagination to deliver experiences that stop people in their tracks. From the Fountains of Bellagio to the Dubai Fountain, our work is built on precision, creativity, and a commitment to doing exceptional work at every stage. We’re looking for a Quality Engineer who is comfortable being close to the work — in the machine shop, weld shop, sheet metal shop, injection molding shop, and the on-premise assembly shop known as Finale. This is a hands-on role for someone who understands how parts are made, how assemblies come together, and how quality can be strengthened by working side by side with the people doing the building. This role partners closely with Manufacturing Engineers and reports through the VP of Manufacturing. It is ideal for someone who is curious, technically grounded, and energized by solving problems where they actually happen. Role Overview The Quality Engineer helps ensure that parts, subassemblies, and finished assemblies meet WET’s standards for quality, fit, function, and reliability. You’ll work across multiple internal manufacturing environments to inspect, investigate, improve, and support the systems that feed our Finale assembly operation. This is not a desk-only quality role. It requires someone who can walk the floor, understand the process, ask the right questions, and help drive practical solutions that improve the way we build. What You’ll Do • Work directly with machine shop, weld shop, sheet metal, injection molding, and assembly teams to support product and process quality, • Perform inspections on incoming materials, in-process components, subassemblies, and finished goods, • Use precision measurement tools and inspection equipment to verify dimensions, tolerances, and conformance to specification, • Operate and support CMM and FARO Arm equipment; program simple routines using PC-DMIS as needed, • Investigate nonconforming parts and assemblies, determine root causes, and help implement effective corrective actions, • Partner with Manufacturing Engineers to improve part quality, process repeatability, and build readiness across departments, • Help develop and maintain Control Plans, PFMEAs, inspection procedures, and work instructions, • Support first article inspections, validation activities, and release criteria for new or revised parts, • Maintain calibration records, inspection documentation, and quality lab files with accuracy and care, • Track recurring quality issues and help identify trends, risks, and opportunities for improvement, • Support the daily flow of work into Finale by helping ensure parts are made correctly, documented properly, and ready when needed, • Maintain an organized, safe, and efficient work environment while following 5S and lean principles, • Collaborate with production, engineering, and leadership teams to keep work moving and resolve issues quicklyWhat You Bring, • Bachelor’s degree in Engineering, Manufacturing, Materials Science, or a related technical field, or equivalent experience, • 5+ years of quality engineering, quality control, or inspection experience in a manufacturing environment, • Strong working knowledge of precision measurement tools, drawings, tolerances, and inspection methods, • Experience working closely with shop-floor teams in machining, welding, sheet metal, molding, or assembly environments, • Hands-on CMM and/or FARO Arm experience; PC-DMIS experience preferred, • Strong problem-solving skills and a practical, root-cause mindset, • Comfort working in a fast-paced, evolving manufacturing environment with multiple priorities, • Strong communication skills and the ability to build trust across technical teams, • Excellent attention to detail, documentation habits, and follow-through, • Curiosity, adaptability, and a willingness to grow with the complexity of the workPreferred Experience, • Background in low-volume / high-mix manufacturing, • Experience in prototype shops, custom fabrication, or engineered product environments, • Familiarity with Lean thinking, 5S, and continuous improvement, • Experience supporting manufacturing engineers and production teams in a highly collaborative settingWhy WET At WET, you’ll be part of a team that builds extraordinary work through craftsmanship, technical discipline, and creativity. The role is ideal for someone who enjoys being close to the action, solving real manufacturing problems, and helping shape how work gets done across a dynamic production environment. As our projects grow in complexity, we’re looking for people who are ready to grow with them — people whose curiosity deepens, whose judgment sharpens, and whose approach becomes even more thoughtful, resilient, and effective over time. If you’re a hands-on Quality Engineer who wants to make a meaningful impact across the shops that feed Finale, we’d love to hear from you. WWW.WETDESIGN.COM Powered by JazzHR Q1QfNhOhxM

Job Description Manufacturing Engineer II Broadata Communications, Inc. (BCI) – Torrance, CA On-site Company Overview Broadata Communications, Inc. (BCI) is a privately held California-based corporation. BCI is a leading and innovative company specializing in the development of market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients are world leaders in their industries, spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. We are ISO 13485 and ISO 9001 certified, with a strong commitment to quality, innovation, and continuous improvement. Job Summary We are looking for a talented and motivated individual as a Manufacturing Engineer II for Video and Audio systems. The right candidate will have the opportunity to be a contributor in ensuring the quality of our Pro AV products. The Manufacturing Engineer II will collaborate with Engineering, Quality, and Production Departments to ensure overall integrity and adherence to product specifications prior to product release and/or shipment. This position requires ownership of internal implementation of processes and procedures, training, and documentation creation. This is an excellent opportunity for a detail-driven professional who thrives in a high-tech manufacturing environment and values teamwork, accountability, and continuous improvement. This critical, hands-on role is based in Torrance, CA. We offer a fast-paced, high impact and stimulating work environment with opportunities for professional growth and development within BCI. Veterans welcome! This is a hands-on position. This is NOT a remote or hybrid position. Key Responsibilities Process Development & Validation • Design, develop, and document manufacturing processes for cable assemblies, fiber optic components, PCBAs, and AV connectivity hardware., • Lead Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) activities for new and modified manufacturing equipment and processes., • Define and execute process validation protocols in compliance with ISO 13485 / Class I medical device., • Conduct and document Measurement System Analysis (MSA) studies including Gage R&R, linearity, and bias assessments to confirm measurement system adequacy.New Product Introduction (NPI), • Drive NPI activities from concept through production readiness, including process development, tooling qualification, and manufacturing feasibility review., • Conduct First Article Inspections (FAI) to verify that new and revised products meet engineering drawings, specifications, and customer requirements., • Collaborate with Engineering and Quality to complete Design for Manufacturability (DFM) reviews during the product development phase., • Develop and maintain Manufacturing Process Instructions (MPIs), work instructions, traveler documents, and assembly aids for new product launches.Tooling & Equipment Qualification, • Define tooling requirements, evaluate vendor-supplied tooling, and manage qualification and ongoing maintenance of manufacturing tools and fixtures., • Create and execute tool validation plans; maintain documentation in the QMS (QT9) in accordance with change control procedures., • Coordinate equipment calibration programs with facilities and production, ensuring measuring and test equipment is maintained to applicable standards.Supplier Quality & Visits, • Conduct on-site supplier visits and process audits to evaluate manufacturing capabilities, quality systems, and compliance with BCI and regulatory requirements., • Participate in supplier qualification activities including capability assessments and initial sample evaluations., • Work with the Supplier Quality team to resolve nonconformances, drive corrective actions (SCAR/CAPA), and support supplier development initiatives.Lean Manufacturing & 5S, • Champion 5S (Sort, Set in Order, Shine, Standardize, Sustain) implementation and ongoing sustainment across manufacturing and warehouse areas., • Conduct regular 5S audits, document findings, and drive corrective actions to maintain a safe, organized, and efficient work environment., • Identify and eliminate the eight wastes through value stream mapping, time studies, and direct observation of production workflows., • Develop standard work documentation and visual management systems to support sustained Lean practices on the production floor., • Train and coach production staff on Lean principles, 5S expectations, and waste identification to build a culture of continuous improvement.Kaizen & Continuous Improvement, • Plan, facilitate, and lead Kaizen events targeting cycle time reduction, yield improvement, scrap reduction, and ergonomic enhancement in manufacturing operations., • Develop Kaizen event charters, coordinate cross-functional teams, and drive implementation of approved countermeasures through to closure., • Track and report Kaizen event outcomes and post-event metrics to quantify savings and verify sustained improvement., • Maintain a continuous improvement pipeline; identify opportunities through data analysis, gemba walks, and employee input., • Foster a Kaizen mindset across the organization by engaging operators, technicians, and engineers in day-to-day problem solving and incremental improvement.Six Sigma & Statistical Methods, • Apply Six Sigma DMAIC methodology to define, measure, analyze, improve, and control manufacturing processes with documented tollgate reviews., • Support or lead Six Sigma projects targeting process variation reduction, defect elimination, and yield improvement aligned with business objectives., • Mentor production and quality staff on basic Six Sigma concepts and statistical thinking.Quality System & Documentation, • Author and maintain controlled documentation including SOPs, work instructions, validation protocols, and engineering change notices (ECNs) within the QMS., • Support internal and external ISO 9001 and ISO 13485 audits; participate in management review activities., • Support investigation and resolution of internal nonconformances and customer complaints through structured root cause analysis (8D, Fishbone, 5-Why)., • Other responsibilities as assigned.Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management. Education & Experience • B.S. in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or equivalent discipline., • 3–5 years of hands-on manufacturing engineering experience in a regulated environment; medical device or FDA-regulated manufacturing strongly preferred., • Demonstrated experience executing IQ/OQ/PQ validation protocols in compliance with ISO 13485 or 21 CFR Part 820., • Hands-on experience with FAI processes and documentation (AS9102 or equivalent frameworks)., • Working knowledge of Measurement System Analysis (MSA/Gage R&R)., • Proven experience implementing 5S programs and sustaining Lean manufacturing practices on an active production floor., • Six Sigma Green Belt certification required; Black Belt preferred. Demonstrated application of DMAIC on manufacturing improvement projects., • Familiarity with cable and connector assembly manufacturing, fiber optic termination, or PCBA processes is a significant plus., • Experience conducting supplier audits and on-site supplier quality visits., • Proficiency with QMS software (QT9 or equivalent) and ERP systems (Sage 100, NetSuite or equivalent)., • Proficiency in MS Office and statistical analysis tools (Minitab or equivalent)., • Knowledge of IPC-A-610, IPC/WHMA-A-620, and related workmanship standards is preferred.Skills & Abilities, • Strong organizational skills with high attention to detail and the ability to manage multiple concurrent projects., • Excellent written and verbal communication skills; ability to author clear, concise technical documentation., • Self-motivated and able to work with minimal supervision in a fast-paced, small-team environment., • Collaborative team player with the ability to interface effectively across Engineering, Quality, Production, and Supply Chain., • Willingness to travel domestically for supplier visits (estimated 10–20%)., • Demonstrated ability to self-learn and adapt quickly to new technologies and product domains., • Proactive and capable of managing multiple priorities while adapting to changing business needs., • Comfortable working in a fast-paced, cross-functional team environment, working extended hours (as needed)., • Proficient in Microsoft Excel and working knowledge of Microsoft Office Suite.Physical Job Requirements The employee in the position will be required to occasionally move throughout the facilities, including climbing stairs, when necessary. Occasional bending and reaching in an office environment, including opening and closing file cabinets drawers with light grasping. Type on a standard keyboard (laptop or desktop). Use standard computer display screens. Use standard push-button phones and must speak clearly and be understood by others. Sit or stand in a standard upright position for a minimum of one hour, but up to 12 hours a day. Be able to lift and carry weight unassisted not exceeding 50 lbs. Compensation and Benefits • Salary Range: $93,000 - $120,000 (based on experience and qualifications), • Medical, vision and dental insurance, • 401(k) with company match (100% of the first 4% in eligible compensation), • Flexible Spending Account, • 2 weeks paid vacation, • 1 Week sick pay, • 10 company holidays, • Group life insurance Powered by JazzHR oLBISgeOZr

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose At Divergent, we are redefining industrial manufacturing through software-driven production, additive manufacturing, and automated assembly systems. Our proprietary Divergent Adaptive Production System (DAPS) combines advanced engineering, robotics, and metal additive manufacturing to build complex structures faster, lighter, and more efficiently than traditional methods. We are seeking a Senior Machine Control Software Engineer to help develop the real-time software systems powering our next-generation metal 3D printing platforms. In this role, you will work at the intersection of software, controls, automation, and advanced manufacturing to create highly reliable machine control solutions that directly impact production performance and print quality. This is a hands-on engineering role focused on real-world hardware integration, high-performance software architecture, and intelligent automation in a fast-paced R&D and production environment. The Role • Design and develop real-time machine contraol software for proprietary industrial 3D printing systems, • Build robust multithreaded applications in modern C++ for motion control, automation, and machine orchestration, • Develop and maintain operator-facing GUI applications for machine monitoring, diagnostics, and control, • Create simulation and modeling tools to validate machine behavior, optimize performance, and improve system reliability, • Design calibration routines, fault detection logic, and automated maintenance workflows to maximize print consistency and uptime, • Collaborate cross-functionally with controls, electrical, mechanical, systems, and manufacturing engineers to integrate software with complex mechatronic systems, • Support commissioning, troubleshooting, and continuous improvement efforts on production hardware, • Contribute to software architecture, code quality standards, CI/CD workflows, and engineering best practicesBasic Qualifications, • Ability to lawfully access information and technology subject to U.S. export controls, • Strong proficiency in modern C++ (C++11 or newer), • Experience developing multithreaded and/or real-time software applications, • Experience with Git or similar version control systems, • Familiarity with build systems and tooling such as CMake, • Strong debugging, problem-solving, and systems-level thinking skillsPreferred Qualifications, • Experience developing GUI applications using Qt, • Familiarity with OpenCV or other computer vision frameworks, • Proficiency in Python for scripting, automation, or test tooling, • Experience with industrial automation, robotics, or control systems, • Understanding of real-time systems, motion control, or digital signal processing (DSP), • Experience integrating software with electromechanical hardware systems, • Familiarity with MATLAB, Simulink, or Simscape for modeling and simulation, • Exposure to CI/CD pipelines and automated testing workflows, particularly using GitHub Actions, • Experience working in advanced manufacturing, aerospace, automotive, robotics, or high-performance engineering environmentsWork Environment Onsite Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E05 - E06 as evaluated through our interview process. E05 / Senior: $141,380 -$194.390 E06 / Staff: $163,270 - $224,500 Pay Range$141,380—$224,500 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role We are hiring an Automation Engineer, NDT to design and deploy automation for advanced NDT inspection cells across UT, VT, RT, and CT. This is an end-to-end automation role for someone who has direct experience building inspection capability in the real world. You will own robot / motion paths, sensor integration, acquisition timing, station sequencing, operator UX, data traceability, safety, and production commissioning. You will partner with certified NDT personnel and Quality on method validation, acceptance criteria, and audit evidence. This is not an NDT technician role and not a generic controls role. We are looking for someone who has personally designed, deployed, or commissioned automated inspection / NDT systems and knows what breaks when those systems hit production. What You'll Do Design and deploy automated inspection cells for advanced NDT methods including ultrasonic testing (UT), visual testing / visual inspection (VT), radiographic testing (RT), and computed tomography (CT). Own the cell automation stack: robot / motion path, sensor integration, deterministic triggering, acquisition PC, sequencer, HMI / operator UX, data logging, and production handoff. Plan scan / inspection paths that balance coverage, probability of detection, cycle time, kinematics, collision risk, and operator workflow. Integrate modality-specific hardware: phased-array UT probes, cameras / lighting / optics, digital radiography sources and detectors, CT turntables / reconstruction flows, and related acquisition systems. Partner with certified NDT personnel and Quality to validate methods against applicable standards and customer requirements. Build structured inspection data pipelines for SPC, traceability, customer handoff, and archival. Own station safety with EHS: radiation for RT / CT, laser / lighting for VT, couplant / water / ergonomics for UT, collision and LOTO for all modalities. Commission on the floor, debug drift / escapes / false calls / timing issues, and hold the line when inspection blocks production. Qualify vendors and integrators; write acceptance tests, red-line designs, and keep suppliers honest. Codify reusable inspection automation patterns so the next station inherits a platform instead of a one-off science project. What We're Looking For 3+ years designing, deploying, or commissioning automated inspection / NDT systems in production or high-reliability environments. Direct ownership of at least one automated inspection station involving robot / motion, sensor acquisition, station sequencing, data logging, and acceptance / production handoff. Deep practical experience in at least one advanced NDT modality: UT: phased-array, TFM / FMC, encoded scanning, robotic scan paths, couplant handling. VT: 2D / 3D / multispectral vision, lighting, optics, calibration, dimensional / cosmetic inspection, gauge R&R. RT: digital radiography, source / detector integration, shielding, interlocks, radiation safety. CT: turntable / positioning, reconstruction pipeline, volumetric analysis, large-data workflow. Measurement rigor: MSA / gauge R&R, POD / ROC where applicable, uncertainty, acceptance criteria, and audit-ready evidence. Working knowledge of robot / motion systems and industrial controls such as Fanuc, ABB, Kuka, Yaskawa, Beckhoff TwinCAT, or Siemens TIA. Comfort debugging across mechanical, controls, acquisition, software, data, Quality, and operator workflows. Bachelor's degree in EE, ME, Mechatronics, Robotics, Physics, Materials, or related STEM, or equivalent direct experience. ITAR eligible. What Will Set You Apart Radiation safety officer / state radiation safety training for RT / CT. GD&T, CMM, metrology, or dimensional inspection background. Python or C# for acquisition glue, vendor SDK wrappers, data processing, or inspection automation tooling. Experience with inspecting to industry standards such as NAS 410, SNT-TC-1A, ASTM, AWS D1.x, MIL-STD, NAVSEA, or customer-specific aerospace / defense inspection requirements. Experience designing and deploying automation into production. Offline robot programming and simulation experience with RoboDK, Process Simulate, Visual Components, or native robot tools. Production experience in aerospace, defense, medical, power generation, nuclear, or shipbuilding environments where customers audit inspection methods. Experience turning one-off inspection stations into reusable platforms: calibration workflows, scan-path templates, fixture standards, data schemas, and acceptance tests. Compensation $145,000 - $230,000 (actual range may vary based on experience) This range reflects what we reasonably expect to pay at the time of posting. Compensation depends on education, experience, skills, location, performance, and business needs. Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose At Divergent, we are redefining industrial manufacturing through software-driven production, additive manufacturing, and automated assembly systems. Our proprietary Divergent Adaptive Production System (DAPS) combines advanced engineering, robotics, and metal additive manufacturing to build complex structures faster, lighter, and more efficiently than traditional methods. We are seeking a Senior C++ Software Engineer to help develop the real-time software systems powering our next-generation metal 3D printing platforms. In this role, you will work at the intersection of software, controls, automation, and advanced manufacturing to create highly reliable machine control solutions that directly impact production performance and print quality. This is a hands-on engineering role focused on real-world hardware integration, high-performance software architecture, and intelligent automation in a fast-paced R&D and production environment. The Role • Design and develop real-time machine control software for proprietary industrial 3D printing systems, • Build robust multithreaded applications in modern C++ for motion control, automation, and machine orchestration, • Develop and maintain operator-facing GUI applications for machine monitoring, diagnostics, and control, • Create simulation and modeling tools to validate machine behavior, optimize performance, and improve system reliability, • Design calibration routines, fault detection logic, and automated maintenance workflows to maximize print consistency and uptime, • Collaborate cross-functionally with controls, electrical, mechanical, systems, and manufacturing engineers to integrate software with complex mechatronic systems, • Support commissioning, troubleshooting, and continuous improvement efforts on production hardware, • Contribute to software architecture, code quality standards, CI/CD workflows, and engineering best practicesBasic Qualifications, • Ability to lawfully access information and technology subject to U.S. export controls, • Strong proficiency in modern C++ (C++11 or newer), • Experience developing multithreaded and/or real-time software applications, • Experience with Git or similar version control systems, • Familiarity with build systems and tooling such as CMake, • Strong debugging, problem-solving, and systems-level thinking skillsPreferred Qualifications, • Experience developing GUI applications using Qt, • Familiarity with OpenCV or other computer vision frameworks, • Proficiency in Python for scripting, automation, or test tooling, • Experience with industrial automation, robotics, or control systems, • Understanding of real-time systems, motion control, or digital signal processing (DSP), • Experience integrating software with electromechanical hardware systems, • Familiarity with MATLAB, Simulink, or Simscape for modeling and simulation, • Exposure to CI/CD pipelines and automated testing workflows, particularly using GitHub Actions, • Experience working in advanced manufacturing, aerospace, automotive, robotics, or high-performance engineering environmentsWork Environment, • OnsiteCompensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E05 - E06 as evaluated through our interview process. E05 / Senior: $141,380 -$194.390 E06 / Staff: $163,270 - $224,500 Pay Range$141,380—$224,500 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description BUILD THE VEHICLES THAT SHOW UP WHEN IT MATTERS Flyer Defense builds the light tactical vehicles that U.S. special operations forces and allied militaries rely on in the world’s most demanding environments. Our platforms are engineered in Los Angeles, proven in theater, and fielded globally. As a Manufacturing Engineer I, you’ll be the engineer who turns how we build into clear, repeatable instructions—documenting assembly methods, building work instructions and routings, and helping launch production lines across vehicle, component, and aftermarket programs. This is a hands-on, floor-facing role for an early-career engineer who wants to learn the craft of manufacturing engineering by doing it. You’ll work alongside senior engineers and technicians, follow established Flyer Defense procedures, and have the latitude to define new ones where a project calls for it. WHAT YOU’LL DO • Document the build. Write and maintain assembly instructions, troubleshooting guides, routings, and line-launch procedures that technicians use on the floor every day., • Create training material. Develop clear, accurate work instructions and training content according to Flyer Defense standards and program requirements., • Support the floor. Confer with technicians and operators on methods and best practices, and apply their feedback to drive corrective action and improve instructions., • Keep the data clean. Maintain product and process databases; enter and organize manufacturing data accurately., • Juggle the work. Manage multiple projects across multiple programs, working to existing procedures and creating bespoke ones where a project needs them., • Partner up. Consult with Lead Design and Managing Engineers on special-project execution and methodology. WHAT WE’RE LOOKING FOR • 1–3 years of product or manufacturing engineering experience in automotive, powersport, or defense (light tactical vehicles a plus)., • Bachelor’s degree in Manufacturing Engineering or a related field—or equivalent hands-on experience., • Familiarity with CAD, including 3D models and 2D print interpretation., • Proficiency in the Microsoft Office Suite (Word, Excel, and PowerPoint)., • Strong technical writing and communication skills, with the ability to work across teams to move a project forward., • Working knowledge of mechanical installation, repair, troubleshooting, and calibration practices, plus general machine and fabrication operations., • Self-motivated, organized, and comfortable working with minimal supervision in a fast-paced, hands-on shop environment., • Must qualify as a U.S. Person under ITAR (U.S. citizen, lawful permanent resident, political asylee, or refugee). NICE TO HAVE • Familiarity with Siemens NX and Teamcenter PDM., • Exposure to ERP systems and general database management., • Experience with Adobe FrameMaker or other technical-documentation tools., • Prior work on automotive or truck components and their manufacturing processes., • Experience operating in cross-functional or matrixed program environments., • Genuine enthusiasm for powered vehicles, off-road, or motorsports COMPENSATION & BENEFITS Base salary: $76,000–$90,000 annually, depending on experience and qualifications. Benefits: Medical, dental, and vision coverage; 401(k) with company match; paid time off; company-paid holidays. Location: On-site at our Los Angeles headquarters, Monday through Friday. This is a full-time, in-person role. Flyer Defense is an Equal Opportunity Employer and a proud federal contractor. We provide equal employment opportunities to all applicants without regard to race, color, religion, sex, national origin, disability, or veteran status. In accordance with federal law, we will not discriminate against applicants for inquiring about or disclosing compensation. This position requires access to information controlled under ITAR; candidates must qualify as a “U.S. Person” as defined by 22 C.F.R. §120.62. Pursuant to the CCPA/CPRA, personal information collected during the application process is used solely for employment-related purposes. Employment with Flyer Defense is on an at-will basis as permitted by California law. Company DescriptionFlyer Defense LLC was formed in 2000 to provide mission specialized, lightweight, off-road wheeled tactical vehicles capable of internal transport in rotary and tilt wing aircraft. The Flyer family of successfully tested and certified Advanced Light Strike Vehicles are interoperable and interchangeable (high degree of commonality), thus enabling mission, focus and role to be customized, all from the two base vehicle width architectures for immediate operational and/or combat relevance configuration.Flyer Defense LLC was formed in 2000 to provide mission specialized, lightweight, off-road wheeled tactical vehicles capable of internal transport in rotary and tilt wing aircraft.\r\n\r\nThe Flyer family of successfully tested and certified Advanced Light Strike Vehicles are interoperable and interchangeable (high degree of commonality), thus enabling mission, focus and role to be customized, all from the two base vehicle width architectures for immediate operational and/or combat relevance configuration.

Job DescriptionDescriptionAs a Senior Embedded Software Engineer at Impulse focused on Actuation & Control Systems, you will be responsible for developing embedded software that controls a variety of actuated systems across launch vehicles and spacecraft. These include rocket engine valves, satellite thrusters, thrust vector control actuators, and motor-driven devices such as reaction wheels and gimbals. You will collaborate with propulsion, avionics, and GNC teams to design high-performance, fault-tolerant firmware capable of operating reliably in harsh environments such as launch and space. Responsibilities • Develop real-time firmware for controlling: Rocket engine valves and thrust vector control actuators (TVCAs); Satellite propulsion systems, including cold gas and electric thrusters; and Motor-driven systems such as reaction wheels, gimbals, and momentum wheels, • Implement closed-loop control for: Position, velocity, torque, and pressure regulation; as well as Feedback via encoders, LVDTs, resolvers, current sensors, and pressure sensors, • Interface with motor drivers and redundant actuator systems using protocols like CAN, SPI, UART, Ethernet, RS-422, and BISS-C., • Design and implement safety-critical state machines for thrust sequences, valve actuation, pressurization, and safe shutdowns, • Participate in hotfire campaigns, environmental testing, and in-flight diagnostics, • Write unit-tested and reviewable production firmware for use in both testbeds and spacecraft Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or a related field., • 5+ years of embedded C/C++ development experience for electromechanical control systems, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack., • Experience implementing real-time control loops, motor commutation, and actuator calibration routines, • Proficiency working with servo motors, stepper motors, or brushless DC motors, • Strong understanding of low-level hardware and digital interfaces (I2C, SPI, CAN, UART) Preferred Skills and Experience • Prior work on rocket engine controller software, including valve sequencing and abort logic, • Experience with satellite attitude control systems (ACS), including reaction wheels, magnetorquers, and small thrusters., • Familiarity with redundant actuator architectures and fault detection/response algorithms, • Exposure to space environment constraints such as vacuum, temperature extremes, and radiation upsets Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Embedded Software Engineer at Impulse focused on Actuation & Control Systems, you will be responsible for developing embedded software that controls a variety of actuated systems across launch vehicles and spacecraft. These include rocket engine valves, satellite thrusters, thrust vector control actuators, and motor-driven devices such as reaction wheels and gimbals. You will collaborate with propulsion, avionics, and GNC teams to design high-performance, fault-tolerant firmware capable of operating reliably in harsh environments such as launch and space. Responsibilities • Develop real-time firmware for controlling: Rocket engine valves and thrust vector control actuators (TVCAs); Satellite propulsion systems, including cold gas and electric thrusters; and Motor-driven systems such as reaction wheels, gimbals, and momentum wheels, • Implement closed-loop control for: Position, velocity, torque, and pressure regulation; as well as Feedback via encoders, LVDTs, resolvers, current sensors, and pressure sensors, • Interface with motor drivers and redundant actuator systems using protocols like CAN, SPI, UART, Ethernet, RS-422, and BISS-C., • Design and implement safety-critical state machines for thrust sequences, valve actuation, pressurization, and safe shutdowns, • Participate in hotfire campaigns, environmental testing, and in-flight diagnostics, • Write unit-tested and reviewable production firmware for use in both testbeds and spacecraft Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or a related field., • 12+ years of embedded C/C++ development experience for electromechanical control systems, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack., • Experience implementing real-time control loops, motor commutation, and actuator calibration routines, • Proficiency working with servo motors, stepper motors, or brushless DC motors, • Strong understanding of low-level hardware and digital interfaces (I2C, SPI, CAN, UART) Preferred Skills and Experience • Prior work on rocket engine controller software, including valve sequencing and abort logic, • Experience with satellite attitude control systems (ACS), including reaction wheels, magnetorquers, and small thrusters., • Familiarity with redundant actuator architectures and fault detection/response algorithms, • Exposure to space environment constraints such as vacuum, temperature extremes, and radiation upsets Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an Embedded Software Engineer for Camera Systems at Impulse, your primary responsibility will be to design, implement, and maintain firmware for image capture and processing systems on spacecraft. You will collaborate with avionics, flight software, and GNC engineers to interface with imaging hardware, support ground and flight tests, and ensure high reliability under harsh environmental conditions. Responsibilities • Develop low-level drivers and control software for camera modules using interfaces like MIPI CSI-2, USB, SPI, and I2C., • Interface with commercial and custom image sensors, implementing robust and efficient data pipelines., • Implement camera configuration, triggering, and synchronization logic., • Support data capture and streaming during ground tests and in-flight operations., • Collaborate with image processing and perception teams to define firmware requirements and APIs., • Contribute to bring-up, debugging, and tuning of camera subsystems in hardware-in-the-loop setups. Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or related technical field., • 2+ years of experience writing C/C++ code for embedded systems, preferably in imaging or robotic applications., • Demonstrated experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack., • Demonstrated understanding of I2C, SPI, and MIPI-based camera interfaces. Preferred Skills and Experience • Familiarity with microcontroller and SoC architectures, especially those used in vision applications., • Hands-on experience integrating image sensors and camera modules into embedded systems., • Familiarity with image pipeline concepts such as exposure control, gain tuning, and calibration., • Understanding of real-time data handling and buffering for high-rate image streams., • Exposure to radiation-tolerant imaging design or fault detection in visual systems. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Protection & Control Engineer/Technician – Field Testing & Commissioning Travel-Heavy Field Role – Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We’re looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You’ll Do: Test and commission P&C systems on high-voltage substations (15 kV – 500 kV) Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. Experience with NETA, IEEE, NFPA, and related standards Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: Bachelor’s in Electrical Engineering/Electrical Technology Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

Job DescriptionQuality EngineerPay $75,000 - $95,000 a yearFull-time1st Shift + overtimeResponsibilities • Provide timely resolutions to customer inquiries., • Returned Material Authorization (RMA) coordination and disposition., • Corrective Action Report (ICAR, CCAR, SCAR) generation and coordination., • Perform scheduled internal quality system audits, process audits, Nadcap audits and supplier audits., • Maintain calibration system., • Maintain quality procedures (QP’s) and work instructions (QAI’s and PCM’s) to conform to all applicable customer requirements, industry standards and registration systems., • Maintain all required certifications: AS9100; Nadcap; IPC-6012; IPC-6013; IPC-6018; MIL-PRF-55110; MIL-PRF-50884; MIL-PRF-31032; IPC-1710; UL., • Submit test samples to outside labs for tests (CL 3/A, IST, HATS, Group B, Group C, PCI, CVI, etc.)., • Generate and submit MIL-PRF-31032 periodic reports, • Utilization of SPC and MSA to ensure process capabilities and control., • Technical Review Board (TRB) involvement when required., • Follow all environmental, health and safety policies, guidelines and regulations., • Other responsibilities may be assigned.Qualifications, • Thorough understanding of quality systems., • Understanding of current IPC, military and customer specifications and requirements., • Ability to read, interpret and work from customer drawings, specifications and standards., • Understanding of quality and statistical measurements, including SPC, DOE, Cpk, MSA, GR&R, etc., • Ability to work effectively in a team environment., • Strong technical writing skills and customer interface skills., • Ability to read microsections., • Computer literate, able to utilize Word, Excel, Power Point, Visio and Access., • Minimum 5 years experience in PWB manufacturing or similar industry, • Minimum 3 years in Quality Assurance / Quality Control disciplines., • IPC-A-600 and IPC-A-610 certifications., • ASQ Certified Quality Engineer and Certified Quality Auditor certifications preferred., • General understanding of Discus and Net Inspect software for generating first article reports., • Ability to obtain Honeywell SCA (Source Certifying Agent) status., • May be exposed to chemicals, dust, and high noise levels., • May be required to work in a clean room environment., • May be required to remain on call during some portion of off shift hours. May be required to work off shift hours and overtime., • May be required to travel within North American.

Job Description JSG is hiring an Entry Level - Recent Grad RF Test Tech / Electrical Engineer for our client in Cypress, CA. Pay rate: $25-$32 DOE Key Responsibilities • Perform electrical and RF testing of oscillator products using approved procedures., • Collect, analyze, and document test data., • Operate RF test equipment, including spectrum analyzers, oscilloscopes, power meters, and frequency counters., • Configure test setups and verify equipment calibration., • Troubleshoot test failures and support root-cause investigations., • Review product configurations against drawings, schematics, and work instructions., • Collaborate with Engineering, Manufacturing, and Quality teams., • Maintain compliance with ESD, quality, and safety procedures. Required Qualifications • U.S. Person as defined by EAR and ITAR regulations., • Bachelor’s degree in Electrical Engineering., • Basic knowledge of RF principles, electronic circuits, and electrical measurements., • Ability to read electrical schematics and technical drawings., • Strong attention to detail, organization, and communication skills. Preferred Qualifications • Hands-on RF lab, internship, or project experience., • Familiarity with RF test equipment and measurement techniques., • Understanding of frequency, gain, attenuation, impedance matching, VSWR, and return loss..Company DescriptionJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 40 years of experience investing in people and companies. We offer medical, dental, vision, life insurance options, paid time off, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 40 years of experience investing in people and companies. We offer medical, dental, vision, life insurance options, paid time off, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job DescriptionManufacturing EngineerJoin a TOP-IN-CLASS Aerospace Manufacturing Company! We're seeking an exceptional Manufacturing Engineer to join our elite team and contribute to cutting-edge aerospace innovation.About the Role As a Manufacturing Engineer with our world-class aerospace manufacturing organization, you will play a pivotal role in designing, implementing, and optimizing manufacturing processes that produce critical aerospace components and assemblies. This position offers an exciting opportunity to work at the forefront of aerospace technology, where precision, quality, and innovation are paramount. You will collaborate with cross-functional teams including design engineering, quality assurance, production, and supply chain to ensure our manufacturing operations maintain the highest standards of excellence that our industry demands. Key ResponsibilitiesProcess Development & Optimization • Design, develop, and implement efficient manufacturing processes for aerospace components, with particular emphasis on welding operations and complex assembly procedures, • Create and maintain detailed work instructions, process specifications, and manufacturing documentation that comply with AS9100 and other aerospace quality standards, • Conduct time studies and capacity analysis to optimize production throughput while maintaining quality standards, • Identify and implement continuous improvement initiatives using Lean Manufacturing and Six Sigma methodologies, • Develop and validate new manufacturing techniques to reduce costs, improve quality, and enhance production efficiencyWelding Engineering & Technical Expertise, • Serve as the technical expert for all welding processes including TIG, MIG, resistance welding, and specialized aerospace welding techniques, • Develop welding procedures and specifications (WPS/PQR) in accordance with AWS D17.1 and other aerospace welding standards, • Qualify welding processes and certify welding operators to ensure compliance with aerospace requirements, • Troubleshoot welding defects and implement corrective actions to prevent recurrence, • Collaborate with materials engineering to select appropriate filler materials and welding parameters for various aerospace alloys, • Maintain welding equipment and ensure proper calibration and maintenance schedules are followed, • Develop and improve Bills-Of-Material (BOM’s)

Job DescriptionSalary: Field Engineer We are hiring several professional and motivated field engineers who are team players and fast learners, and able to deliver precise and detailed work in 7x24 basis. Job Location: Los Angeles, CA Responsibilities: 1. Responsible for ensuring availability and reliability of multiple data centers to meet the requirements of enterprise operation., 2. Install, configure and upgrade routers, switches, servers as well as map out, run and connect all LAN and SAN fiber optic network cabling., 3. Perform ongoing calibration, monitoring, and troubleshooting of enterprise servers running on Red-Hat Linux to ensure proper performance levels are sustained., 4. Analyze and monitor system health, responded appropriately to network alerts and events, use the standard ticket-handling procedures to escalate a ticket upstream when appropriate., 5. Assist in the data center migration between different sites by racking, labeling both physically and logically on asset management application, using an ITL-based configuration and change management process, 6. Support data center capacity planning and construction by conducting power/cooling audits on data halls to validate available capacity for rack infills, 7. Record and maintain accurate incident and change records to safeguard the quality of operations along with escorting vendors and ensuring client policies are followed Requirements: 1. Experienced in server installation and network configuration, 2. Familiar with TCP/IP, switching, routing, and optical communication technology, 3. 1+ year work experience in maintenance & operation at an IDC or Network Center, 4. Trouble-shooting and problem solving abilities., 5. Must have at least a bachelor's degree in Computer Science, Information Systems, Computer Engineering, Electrical Engineering, Telecommunications, or a related field, 6. Speaking Chinese Mandarin is a plus

Job DescriptionDescriptionAs a Staff RF Embedded Software Engineer at Impulse, your core responsibility will be to own the design, testing, and delivery of flight RF software systems for space missions anywhere from low earth orbit to mars. Responsibilities • Work with a cross-disciplinary team to define and implement RF software communications requirements on a mission-by-mission basis, implement RF software architectures, and bring up RF systems, • Development of algorithms for RF digital signal processing and calibration, • Design and optimization of RF system control algorithms to improve performance and reliability, • Work with ground software teams to develop and test satellite to ground data pipelines Minimum Qualifications • 8+ years of experience in developing software for wireless systems in critical applications, • 8+ years writing embedded C/C++ code, • Ability to work in the lab with RF equipment including spectrum analyzers, signal generators, and software defined radios, • Proficient in testing and troubleshooting complex mixed signal boards, • Proficient in testing RF components such as PA’s, PLL’s, LNA’s, and mixers, • Strong understanding of the major blocks of RF signal modulation/demodulation Preferred Skills and Experience • Xilinx UltraScale+ board bring up and development experience, • Experience implementing baseband software for systems using PSK, GFSK, or APSK, • Experience with common RF protocols such as DVB-S2, and CCSDS, • Experience writing software or firmware for a space environment (space link budgets, ground station integration, etc.), • Experience with GNU radio flowgraph development and troubleshooting, • Experience in a startup or agile development environmentAdditional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an RF embedded software engineer your core responsibility will be to own the design, testing, and delivery of flight RF software systems for space missions anywhere from low earth orbit to mars. Responsibilities • Work with a cross-disciplinary team to define and implement RF software communications requirements on a mission-by-mission basis, implement RF software architectures, and bring up RF systems, • Development of algorithms for RF digital signal processing and calibration, • Design and optimization of RF system control algorithms to improve performance and reliability, • Work with ground software teams to develop and test satellite to ground data pipelines Minimum Qualifications • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or related technical field, • 2+ years of experience in developing software for wireless systems in critical applications, • 2+ years writing embedded C/C++ code, • Ability to work in the lab with RF equipment including spectrum analyzers, signal generators, and software defined radios, • Proficient in testing and troubleshooting complex mixed signal boards, • Proficient in testing RF components such as PA’s, PLL’s, LNA’s, and mixers, • Strong understanding of the major blocks of RF signal modulation/demodulation Preferred Skills and Experience • Xilinx UltraScale+ board bring up and development experience, • Experience implementing baseband software for systems using PSK, GFSK, or APSK, • Experience with common RF protocols such as DVB-S2, and CCSDS, • Experience writing software or firmware for a space environment (space link budgets, ground station integration, etc.), • Experience with GNU radio flowgraph development and troubleshooting, • Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Thrive with Volt! Volt is immediately hiring a Quality Engineer II in Carson, CA. As a Quality Engineer II, you will: Utilize lean kaizen events to improve a product line or lines by training employees and using quality assurance process sampling systems, procedures and statistical techniques. The Quality Engineer will design, or specify inspection and testing mechanisms and equipment, analyze production and service limitations and standards, recommend the revision of specifications, and formulate quality assurance policies and procedures. Conduct training on manufacturing quality assurance, lean manufacturing and SPC concepts and tools. The Quality Engineer is the control point for the analysis, reporting and training of a product line or lines. Summary of Duties: • Reviews and signs engineering change notices (ECNs) and engineering drawings, • Works with the quality control and production personnel to drive the continuous improvement process, • Tracks and ensures measuring and testing equipment used within the division is within calibration, • Monitors and assists first article inspection (FAI) information system, • Writes reports and standard work, performs employee training, and conducts statistical analysis, • Ensures production tooling is inspected and conforms to specs prior to use, • Approves work orders prior to release to ensure engineering operations are properly documented, • Applies purchase order quality clauses to applicable products within an MRP system, • Assists corrective action board (CAB) by being a member, provides problem solving / resolution, • Performs internal process audits to company specifications This is a 6-month contract opportunity. Schedule: Monday-Friday on-site, 7:00am-4:00pm The ideal candidate will have: • Education: B.S. Engineering (E.g Mechanical, Aerospace, Industrial or similar) preferable OR Experience: 5+ years’ experience on acting engineering role under AS9100 QMS environment may be acceptable, • FAIR AS9102 Required, • RCCA Methodologies Required, • Computer Skills: Proficient with Microsoft Office® programs ®, Office, and with MRP systems. Advanced Excel skills., • Other Skills: Certified blue print reader. Good trouble shooting skills and strong communication skills required. Pay Range: $38.00 - $40.00 per hour DOE *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email hr_dept@volt.com or call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Innova Solutions and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at volt-information-sciences-privacy-policy.pdf Pandologic. Keywords: Quality Control / Quality Assurance Engineer, Location: Carson, CA - 90746 , PL: 603413072

Job DescriptionYorktel is always seeking new talent to join our team. Therefore, we are advertising some key positions within the company where we can collect and store potential candidates. By submitting your Resume for this specific posting, you agree to have your details kept on file and to be contacted as and when open positions become available. Please ensure your Resume has your most recent experience and up to date contact details. If you do not hear from us, it is because we are not currently recruiting for this position. For over 35 years, Yorktel has been the video managed services partner around the world for some of the largest business and government agencies. With over 10,000 video systems under management worldwide – more than any other video communications service provider – Yorktel has the proven expertise and global reach to deliver enterprise-quality visual communications. Yorktel is currently seeking a Senior Field Engineer who will install, commission, and manage the technical aspects of large scale commercial networked Audio/Visual Presentation and Videoconferencing systems. This position regularly works within a project team of individuals with varying responsibilities, degrees of expertise and influence. This position reports directly to the Director of Yorkforce. The Director of Yorkforce will provide direction and support to the Sr. Field Engineer. The Sr. Field Engineer will help determine best strategy for remediation of any variation to client requirements and/or technical variables which may inhibit successful completion of any project or effort. The Director of Yorkforce will also support the Sr. Field Engineer on career development and escalation issues. Roles & Responsibilities • Communicate to stakeholders, any client, site and/or project specific issues, make recommendations to the PMO in regard to such issues and ensure agreed upon resolution of issues., • Regularly communicate answers to complex questions and respond to detailed inquiries regarding technical issues and the resolutions thereof., • Handles and is expected to protect all internal and external confidential information and must utilize discretion and judgment based on company policies and procedures., • Communicate daily technical and site specific information to the project team in a comprehensive, thorough and detailed manner., • Daily interaction with clients and job sites to document customer requirements and job site conditions., • Provide any and all post installation documentation, including red lined drawings, network information, MAC addresses, etc... back to Project Management., • Be capable of working effectively and efficiently with support from other members of the engineering team., • Maintain complete and accurate project documentation and records., • Communicate effectively with internal staff, client representatives, cooperative trades and subcontractors., • Daily oversight of subcontractors and other installation engineers., • Be responsible for successfully completing assignments on time and within budget and communicate effectively to the project team if budget and/or timeline is in jeopardy., • Conform to company technical standards and practices., • Correctly interpret multiple formats of technical specifications; schematic drawings and architectural diagrams., • Knowledge of and adherence to Yorktel policies and procedures., • Other responsibilities as assigned. Technical Job Responsibilities: • Lead the installation, replacement and/or configuration of integrated system components, networked Video Conferencing Codecs, networked A/V Control Systems and networked Audio DSP Devices, • Test and commission the final installation of entire system prior to Client handover including proper installation, set-up, calibration and operation of DSP-based audiovisual components and networked AV control systems, • Daily communication with the Project Management Team of project status including immediate communication of any issues which may impact successful, timely completion of project, • Audio system calibration, including AEC and RF systems, • Display calibration for color, EDID and others., • Perform hands on Client training upon completion of project, • Ensure Customer Acceptance Form is signed and sent back to Project Management upon Client sign off of job completion, • Ensure all ‘red lined’ engineering drawings are completed and returned upon completion of project., • Provide post-installation support in transition to Yorktel tech services departments, • All other duties as assigned. Skills & Qualifications: • Knowledge of video/audio conferencing service standards., • Knowledge of audiovisual, videoconferencing and IT products and applications., • Must show professionalism, integrity and teamwork., • Exceptional customer service and problem solving skills., • Exceptional written, verbal and interpersonal skills., • Proficient in the use of computers and MS Suite (Outlook, Project, Excel and Word) Education & Experience: • 5 years of experience in Network, Audiovisual and/or video conferencing system integration., • College degree or military technical college graduate or equivalent and related work experience., • Polycom/Tandberg/Cisco certified Videoconference Engineer (TCE/CVE/etc) certification desirable, • Audio DSP (Polycom, ClearOne, BiAmp) certifications desirable, • AVIXA CTS certification with Advanced CTS-I, CompTia Network or CCNA certifications desirable, • Proficiency in video/audio/control network infrastructure in support of commissioning and other technical processes. Additional Qualifications: • May require occasional lifting (up to 50 lbs)., • Requires extensive sitting, standing and walking., • Domestic travel requiring multi-night stays within and at times outside the local work area., • Valid passport; International travel possible., • Valid U.S. driver’s license ., • If permissible by applicable law, may be required as a condition of employment to complete a background check and/or drug test if required by law or by current or future contracts/clients/vendors, etc., • Must be willing to apply for security clearances, suitability, and other related clearances to be able to work at certain customer locations. Join us and you will enjoy an excellent salary and benefits package, including 401k and Flex 125 plans. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, genetic information and testing, family and medical leave, sexual orientation and gender identity or expression, protected veteran status, or any other characteristics protected by law. We prohibit retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role: Join us in shaping the future of aerospace and defense manufacturing. As an Additive Manufacturing Engineer - Applications, you will serve as a technical bridge between customer requirements and production-ready metal additive manufacturing solutions. You will work closely with customers and internal teams to evaluate part feasibility, guide Design for Additive Manufacturing (DfAM), support process development, and help scale programs from early engagement through qualification and production. This is a hands-on, customer-facing engineering role at the intersection of applications engineering, manufacturing execution, and process development. You will help solve real-world metal AM challenges, convert those solutions into repeatable manufacturing methods, and support the successful launch of high-impact aerospace and defense programs. What You’ll Do: Customer Technical Support & Requirements Capture: Support technical engagement with customers by gathering requirements, clarifying design intent, and translating program needs into actionable manufacturing plans that align customer requirements with feasible additive manufacturing solutions. Program Feasibility & Application Development: Evaluate part and program fit for metal additive manufacturing, identify technical risks, and develop new additive applications, processes, and manufacturing approaches that expand capability and support new business opportunities. DfAM & Design Reviews: Provide DfAM guidance on build orientation, support strategy, feature design, distortion risk, tolerance approach, and post-processing-aware design decisions while collaborating closely with design, analysis, quality, manufacturing, and responsible engineers. Build Planning & Build File Optimization: Develop and optimize build strategies, build files, and print plans to produce high quality parts in minimum time with maximum consistency, including parameter refinement and support for part nesting, layout, and downstream production constraints. Robustness, Repeatability & Process Improvement: Identify and drive improvements that make printer platforms and additive workflows more robust and repeatable based on machine behavior, failed builds, in-process monitoring data, and hands-on troubleshooting, calibration, and process control improvement efforts. Metal AM Process Support: Partner with internal process and manufacturing teams to optimize and develop all aspects of metal additive manufacturing, especially PBF-LB, including parameter selection, process control, DOE support, process window optimization, and technology maturation. Materials & Process Integration: Work closely with materials and quality teams to investigate properties, geometric accuracy, and surface finish results to help refine print parameters, heat treatments, and manufacturing guidance for existing and new alloys, including aluminum, copper, nickel-based, and other advanced materials as applicable. Post-Processing Integration: Coordinate with internal and external teams across depowder, heat treat, HIP, support removal, machining, finishing, and related secondary processes to ensure end-to-end manufacturability and production readiness. Qualification & Validation Execution: Support qualification planning, validation builds, acceptance criteria definition, and data package development required for customer approval and production release, including alignment with aerospace qualification processes and specifications where required. Data Systems, Traceability & Documentation: Maintain clear engineering documentation, build records, and traceability artifacts, and produce and improve reports, procedures, manuals, and systems that capture results, enable process analysis, and refine development workflows while minimizing administrative burden. Technical Problem Solving: Investigate build, machine, process, and part quality issues using structured root cause analysis and first-principles engineering judgment, and support corrective actions that improve yield, consistency, and equipment performance. Cross-Functional Execution: Work closely with Additive Manufacturing, Manufacturing Engineering, Quality, Materials, Supply Chain, and Operations to industrialize solutions, coordinate with equipment OEMs when needed, and meet customer commitments. Best Practices, Standardization & Safety: Capture lessons learned, develop best practices for equipment and processes, improve standard work and design guidance, investigate new additive technologies that meet business needs, and identify opportunities to improve safety throughout the additive manufacturing workflow. Technical Communication: Present technical recommendations, trade studies, and status updates clearly to internal stakeholders and customers. What We’re Looking For: Bachelor's degree in Engineering, Mechanical, Materials, Aerospace, Manufacturing, Welding, or related field. 4+ years of experience in additive manufacturing, manufacturing engineering, applications engineering, process engineering, or development of metallic additive technologies, preferably in metal AM. Hands-on knowledge of metal additive manufacturing processes, especially PBF-LB, including build planning, support strategy, machine operation, and production considerations. Experience working with engineering drawings, GD&T, tolerance interpretation, and inspection planning. Experience supporting part development from prototype through qualification or early production, including process and application development. Familiarity with DfAM principles and the interaction between part design, print strategy, downstream processing, and manufacturing performance. Strong problem-solving skills with the ability to analyze technical issues, apply sound engineering fundamentals, and recommend practical solutions. Ability to communicate effectively with customers, engineers, technicians, equipment suppliers, and cross-functional teams. Willingness to travel up to 15-20%, primarily within the U.S. U.S. Citizen or Permanent Resident required for ITAR compliance. What Will Set You Apart: Experience supporting aerospace and defense applications in regulated manufacturing environments, including qualification or flight-critical hardware requirements. Experience with process validation, qualification planning, capability studies, statistical process control, or multifactorial DOE. Familiarity with AM standards and specifications, including ASTM, ISO/ASTM, aerospace customer requirements, and qualification documentation practices. Experience with post-processing methods such as heat treat, HIP, machining, support removal, surface finishing, and related secondary or joining processes. Experience with AM build preparation software, CAD tools, simulation tools, data analysis workflows, and PLM or MES environments such as NX, Teamcenter, Manufacturo, or similar systems. Familiarity with in-situ monitoring, sensor data, metallurgical evaluation, CT inspection, optics and laser systems, or advanced characterization methods. Experience contributing to customer design reviews, technical workshops, proposal efforts, and cross-functional collaboration with design, analysis, manufacturing, and quality teams. Exposure to quality systems and production documentation in environments such as AS9100 or equivalent. Experience operating additive machines, supporting parameter development, implementing process control improvements, and troubleshooting or calibrating multi-laser PBF-LB equipment. Experience documenting best practices for new equipment, process changes, or manufacturing methods, with working knowledge of additive, subtractive, and metal joining techniques. Compensation: For this role, the target salary range is $135,000 - $200,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose At Divergent, we are redefining industrial manufacturing through software-driven production, additive manufacturing, and automated assembly systems. Our proprietary Divergent Adaptive Production System (DAPS) combines advanced engineering, robotics, and metal additive manufacturing to build complex structures faster, lighter, and more efficiently than traditional methods. We are seeking a Senior Embedded Software Engineer (C++) to help develop the real-time software systems powering our next-generation metal 3D printing platforms. In this role, you will work at the intersection of software, controls, automation, and advanced manufacturing to create highly reliable machine control solutions that directly impact production performance and print quality. This is a hands-on engineering role focused on real-world hardware integration, high-performance software architecture, and intelligent automation in a fast-paced R&D and production environment. The Role • Design and develop real-time machine contraol software for proprietary industrial 3D printing systems, • Build robust multithreaded applications in modern C++ for motion control, automation, and machine orchestration, • Develop and maintain operator-facing GUI applications for machine monitoring, diagnostics, and control, • Create simulation and modeling tools to validate machine behavior, optimize performance, and improve system reliability, • Design calibration routines, fault detection logic, and automated maintenance workflows to maximize print consistency and uptime, • Collaborate cross-functionally with controls, electrical, mechanical, systems, and manufacturing engineers to integrate software with complex mechatronic systems, • Support commissioning, troubleshooting, and continuous improvement efforts on production hardware, • Contribute to software architecture, code quality standards, CI/CD workflows, and engineering best practicesBasic Qualifications, • Ability to lawfully access information and technology subject to U.S. export controls, • Strong proficiency in modern C++ (C++11 or newer), • Experience developing multithreaded and/or real-time software applications, • Experience with Git or similar version control systems, • Familiarity with build systems and tooling such as CMake, • Strong debugging, problem-solving, and systems-level thinking skillsPreferred Qualifications, • Experience developing GUI applications using Qt, • Familiarity with OpenCV or other computer vision frameworks, • Proficiency in Python for scripting, automation, or test tooling, • Experience with industrial automation, robotics, or control systems, • Understanding of real-time systems, motion control, or digital signal processing (DSP), • Experience integrating software with electromechanical hardware systems, • Familiarity with MATLAB, Simulink, or Simscape for modeling and simulation, • Exposure to CI/CD pipelines and automated testing workflows, particularly using GitHub Actions, • Experience working in advanced manufacturing, aerospace, automotive, robotics, or high-performance engineering environmentsWork Environment, • OnsiteCompensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E05 - E06 as evaluated through our interview process. E05 / Senior: $141,380 -$194.390 E06 / Staff: $163,270 - $224,500 Pay Range$141,380—$224,500 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionAbout DexterityAt Dexterity, we believe robots can positively transform the world. Our breakthrough technology frees people to do the creative, inspiring, problem-solving jobs that humans do best by enabling robots to handle repetitive and physically difficult work. We’re starting with warehouse automation, where the need for smarter, more resilient supply chains impacts millions of lives and businesses around the world. Dexterity's full-stack robotics systems pick, move, pack, and collaborate with human-like skill, awareness, and learning capabilities. Our systems are software-driven, hardware-agnostic, and have already picked over 15 million goods in production. And did we mention we’re customer-obsessed? Every decision, large and small, is driven by one question – how can we empower our customers with robots to do more than they thought was possible? Dexterity is one of the fastest growing companies in robotics, backed by world-class investors such as Kleiner Perkins, Lightspeed Venture Partners, and Obvious Ventures. We’re a diverse and multidisciplinary team with a culture built on passion, trust, and dedication. Come join Dexterity and help make intelligent robots a reality! About the RoleAs a Mech Specialist, you will be the primary engineer to operate our product at the customer site, and be the first point of contact for troubleshooting issues, and providing communication to our development team. This role bridges hardware, systems integration, and field operations with ownership of diagnostics, repairs, retrofits, and lifecycle service actions. You’ll lead on-site investigations, coordinate fixes, and interface tightly with our Development team. Success in this role means hands-on operational excellence, a deep understanding of Physical AI systems, and the ability to communicate clearly with both technical teams and operations leaders. *Expense paid training will be onsite in Redwood City, CA prior to working at client site*Physical & Work Environment • Location: Customer Facility in Gardena, CA., • This position requires extended deployment to customer locations, with up to 80% of time spent stationed on-site., • On-site assignments will involve warehouse conditions (temperature variations, industrial noise) and prolonged standing or walks., • Assignments may span several weeks or months and are intended to establishing a consistent presence at the customer site.Core Outcomes, • New Product Introduction: Ensure successful field deployment of new products by driving pilot execution, resolving early issues, and meeting customer KPIs., • Reliable Operations: Maintain high Mech system uptime by diagnosing root causes and executing rapid, durable fixes in the field., • Lifecycle Stewardship: Own warranty actions, spare part tracking, retrofit execution, and RMA processing for your assigned sites., • Customer Confidence: Act as the face of Dexterity Engineering in the field—resolving chronic issues and maintaining long-term system health., • Operational Excellence: Reduce repeat incidents by authoring runbooks, knowledge base articles, and automated diagnostics.Key Responsibilities, • Run day-to-day operations of the Mech system at customer sites during pilots., • Act as super-user, first line of support, and liaison between DGS and Dexterity., • System Operation: Safely operate Mech and materials handling systems. Manage daily workflow, including package exception handling., • Issue Management: Identify and report issues; perform initial T0 troubleshooting. Validate fixes in the field and close out issues with Echo/Delta teams. Track issue lifecycle on site until closure., • Reporting: Provide daily internal updates and KPI reports. Deliver daily customer-facing reports on operations status., • Customer Interface: Align pilot schedules with local operations team. Support customer training sessions and act as a trainer for new users., • Feature Deployment: Execute SW upgrades/downgrades and RFT (Request for Test) activities for software and hardware. Manage test packages and coordinate new feature validation., • Maintenance & Logistics: Manage spares, tools, and maintenance cage. Support preventive maintenance activities as directed by Echo/Delta., • Continuous Learning: Build knowledge base of operations, troubleshooting, and reporting.Core Skills & Experience, • Strong troubleshooting skills across electromechanical systems, pneumatics, drives, sensors, and industrial robotics, • Comfort with Linux command line, log analysis, and basic application debugging (Python/SQL), • Familiarity with tools like Jira, Zendesk, and knowledge base platforms, • Experience managing spares, executing RMAs, and coordinating with supply chain or service teams, • Ability to read schematics, wiring diagrams, and mechanical drawings, • Self-starter mindset, with ability to lead service actions under ambiguous field conditions, • Strong communication skills to clearly explain findings and collaborate across functions, • Familiarity with support tools and observability platforms (e.g., Grafana, Kibana, Foxglove, ArgoCD)., • Self-starter mindset with a willingness to take ownership in ambiguous environmentsBias for Action — sense of urgency in production environments; willingness to “own the ticket” until closureNice-to-Have, Role-Specific Strengths, • Experience supporting warehouse robotics or industrial automation systems, • Familiarity with EtherCAT, Beckhoff, or Elmo servo drive systems, • Prior field service engineering or hardware NPI commissioning experience, • Experience developing or maintaining diagnostic tooling, • Knowledge of application-layer debugging, especially for real-time systems, • Understanding of reliability modeling, FMEA, or service metrics (e.g., MTTR, MTBF)Qualifications, • Bachelor’s degree in Mechanical, Electrical, Mechatronics, or Industrial Engineering or related field, • 3+ years in field service, product support, or hardware debugging roles in robotics, automation, or complex electromechanical systems, • Physical ability to perform service tasks in warehouse environments, including equipment access, lifting, and calibration, • Comfortable working extended hours or on-call rotations for high-severity incidents, • Must be able to travel up to 25%, • Travel may include assignments in Seattle, WA and Tracy, CAOur Total Rewards philosophy is designed to recognize contributions toward meaningful innovation. Base pay is one component of a broader compensation package that may include equity grants, benefits, and other incentives, depending on role and eligibility. Base Salary Range: $45 – $50 hour, commensurate with experience. Comprehensive health, dental, vision, and equity package. Flexible PTO, and a culture committed to growth and inclusion.Equal Opportunity Employer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are seeking a Quality Assurance Lead/Manager (MRO Inspection) with aviation repair experience to join our team! If you enjoy working under minimal supervision with the freedom and flexibility to directly to oversee inspection and production, have excellent communication skills, can collaborate with our internal staff and clients, while leaving your ego at the door, then we are looking for you. Repairtech’s company culture is one that embraces a positive, open-door policy environment and encourages a strong sense of teamwork. Repairtech International, Inc is a state-of-the art FAA repair station providing innovative repair development to clients around the world. Repairtech’s expertise in repair design for mechanical aircraft parts in the commercial and military aviation industries has been utilized since 1978. If you believe you could fit in with our team and live in the Van Nuys/San Fernando Valley/Northern Los Angeles County area, then we’d like to hear from you. Job Responsibilities: • Participate in Production and Engineering meetings., • Coordinate and review brazing applications with Engineering., • Participate in 5s Training and update 5s tracking log., • Communicate with sales staff and Engineers to resolve customer issues in a timely manner., • Create and update internal procedures., • Review and sign 8130 packages for shipment., • Review completed routers for accuracy and prepare for scanning., • Proof new repairs for accuracy and completeness prior to release., • Review and audit routers for corrections, omissions, and updates., • Create rework and warranty routers., • Contact and obtain corrected certifications from suppliers., • Conduct annual Internal Audits, scheduled External Supplier Audits and resolve issues of External Suppliers., • Verify Supplier audits conducted on schedule., • Assist Accountable Manager during audit preparation., • Conduct annual Product and Job Audits., • Create and track internal and external correction action responses., • NDT Level II and Level III contact including Technical Sheet approvals., • Determine and track Equipment Preventative Maintenance., • Main contact for CUPA/CERS and update online account., • Review military parts with DCMA representative (when needed)., • Manage Vision Exams of appropriate personnel are conducted on schedule., • Manage warranty program – determine actual warranty claim and release parts to shop., • Create and update Warranty log., • Create Internal and External Non-Conformance Reports, include determining how to prevent recurrence., • Inspect parts from outside suppliers, update routers, and release parts to shop., • Perform hardness testing and operate Profilometer to determine surface finish., • Operate CMM for final and in-process inspections (when needed)., • Manage Shelf-Life program and dispose of expired items., • Create purchase orders for shelf-life materials (when needed)., • Manage measuring instrument calibration program which includes calibrating majority of instrument inventory. Create purchase orders for outside calibrations., • Manage liquid waste inventory and removal., • Photograph parts and email to applicable parties., • Operate and repair high temp oven., • Track and record inspection room temperatures., • Perform monthly fire extinguisher inspections and manage recertification with supplier. Requirements: • Must add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Compute rate, ratio, and percent., • Certified Level 1 NDT auditor and/or ability to become certified., • Word, Excel, ERP System or experience with in-house database system., • Ability to read and apply precision measuring instrument to blue print requirements., • Possess good inter personal and motivational skills., • Prepare layouts, including prototype work., • Meet production schedules and deadlines on time., • Contribute to methods improvement program. Education and/or Experience: • Bachelor's degree in engineering, quality assurance, or related field or in lieu of a degree, 4 years minimum experience working as an engineer in the relevant field., • Understanding of mechanical systems and inspection processes, including in-process inspection and dimensional inspection., • 10-15 years experience in Quality environment with 5 years as a supervisor or manager in machining techniques and manufacturing., • 3 to 5 years lean manufacturing with ability to implement conceptual ideas to the shop floor., • FAA Certified Repair.

Job Description:\n\nHadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role: This is a hands-on leadership role for a true AM quality expert. You will own the full qualification lifecycle, from Installation Qualification (IQ) through Operational Qualification (OQ) and Material Qualification (MQ), ensuring Hadrian's processes meet or exceed the requirements of AMS 7003, AMS 7032, NASA-STD-6030/6033, NAVSEA Technical Publications, and prime customer specifications. This role spans multiple AM modalities, including Laser Powder Bed Fusion (LPBF) and Directed Energy Deposition (DED) processes, with specific emphasis on Wire Arc Additive Manufacturing (WAAM) qualification for U.S. Navy and submarine industrial base applications. You will be responsible for qualification across both PBF-LB and DED; however, deep hands-on expertise in one of these modalities is required, with working knowledge of the other sufficient to provide technical direction and grow into full ownership. You will work cross-functionally with Hadrian's Materials and Process (M&P) team, Applications team, and Systems team to achieve results. In this model, you own the requirement set, including qualification criteria, process control standards, KPV limits, and acceptance specifications, while the M&P, Applications, and Systems teams conduct the implementation. Your deep knowledge of AM process physics, laser and/or arc-based energy sources, feedstock metallurgy, and qualification methodology will be the foundation on which Hadrian builds a scalable, auditable, and production-ready AM operation. What You’ll Do: Cross-Functional Requirements Ownership: Own the AM quality requirement set across Hadrian's operations. Collaborate with the Materials and Process (M&P) team, Applications team, and Systems team to define qualification criteria, process control standards, KPV limits, material acceptance specifications, and documentation requirements. Ensure requirements are clearly communicated and properly implemented through ongoing oversight and compliance verification. Serve as the quality authority during cross-functional reviews, providing technical direction while partner teams execute implementation activities. Machine Qualification and Process Validation: Own the end-to-end qualification framework for AM equipment, including IQ, OQ, and MQ. Define qualification requirements, acceptance criteria, and test matrices. Collaborate with the Materials and Process (M&P) team to develop build layouts and qualification plans; M&P executes those plans while this role provides oversight and ensures compliance. Ensure all machines are maintained in a known, calibrated state with active qualification status. KPV Management and Process Control: Define and own the requirements for Key Process Variables including laser power, beam caustics (spot size, shape, M2, thermal shift, location of focus), scan field calibration, shielding gas flow, and oxygen content. Collaborate with M&P and Systems teams to establish tolerance bands, measurement frequencies, SPC programs, and process window studies per AMS 7003 and AMS 7032 guidance. Ensure ongoing compliance through oversight and review of KPV data. Laser Diagnostics and Beam Characterization: Define requirements and acceptance criteria for all laser power measurement, beam profiling, and caustic measurement activities. Collaborate with M&P to specify beam profiling equipment and define measurement protocols. Provide oversight of measurement execution and interpret results to ensure laser systems are performing within qualified parameters. Gas Flow Measurement and Control: Define requirements for gas flow characterization across build platforms, including measurement methods, acceptance criteria, and correlation to part quality. Collaborate with M&P on execution of anemometer-based measurements and flow mapping. Ensure airflow consistency is validated during IQ and monitored through PM. DED and WAAM Qualification: Own the qualification framework for Directed Energy Deposition processes, with specific focus on Wire Arc Additive Manufacturing (WAAM) for U.S. Navy and submarine industrial base applications. Collaborate with M&P to define process control requirements, qualification test plans, and acceptance criteria for DED/WAAM in accordance with NAVSEA Technical Publications, AWS D20.1, and applicable defense standards. Provide oversight of qualification execution and ensure methodology supports NAVSEA technical warrant holder approval for AM production. Standards Compliance and Regulatory Readiness: Serve as the subject matter expert on AMS 7003, AMS 7032, NASA-STD-6030, NASA-STD-6033, NAVSEA Technical Publications for PBF and DED, AWS D20.1, and applicable prime customer specifications. Maintain awareness of evolving AM standards from SAE, ASTM, ISO, AWS, and Nadcap. Ensure Hadrian's quality systems and process control documents align with current and anticipated requirements. NIAR Qualification Framework, JAQS-SQ, and Navy AM COE Alignment: Stay current with NIAR's work on AM machine qualification, OQ guidance, the Joint Additive Qualification for Sustainment, Supplier Qualification (JAQS-SQ) program, and the U.S. Navy's Additive Manufacturing Center of Excellence (AM COE) activities. Leverage these frameworks to inform Hadrian's internal qualification strategy and ensure alignment with DoD and Navy supplier readiness expectations. Powder Quality and Material Control: Own the requirements for feedstock quality across both powder and wire processes, including incoming inspection criteria, lot control standards, storage and handling requirements, reuse methodology, and contamination prevention. Collaborate with M&P to develop and implement procedures aligned with AMS 7002 and alloy-specific powder specifications. For wire feedstock, collaborate with M&P to ensure chemistry, surface condition, size tolerance, and traceability requirements are met. Provide oversight of powder reuse procedures, sampling plans, and sieve management protocols to ensure ongoing compliance. Material Qualification and Testing: Define target material properties, acceptance criteria, and testing requirements. Collaborate with M&P to develop test plans and manage mechanical testing campaigns (tensile, fatigue, compression, metallography, chemistry). Provide oversight to ensure OQ builds meet material specification requirements across all qualified orientations and build areas. Quality Systems and Documentation: Own the requirements for AM-specific process control documents (PCDs) including facility control plans, operator training programs, work instructions, digital file configuration control, PM plans, calibration verification plans, machine requalification plans, and KPV plans. Collaborate with M&P, Applications, and Systems teams on document development. Ensure all documentation is compliant and integrated into Hadrian's Quality Management System. Supplier Quality Oversight: Collaborate with Supply Chain and M&P to define technical quality requirements for AM suppliers. Provide oversight of qualification audits, process reviews, nonconformance management, SCAR issuance, and CAPA verification. Ensure suppliers maintain compliant quality systems and produce material that meets Hadrian's requirements. Requalification and Verification Management: Own the requalification framework, including triggers and verification event criteria. Collaborate with M&P and Systems teams to assess the impact of machine changes, maintenance activities, software updates, component replacements, and environmental changes on qualification status. Determine appropriate response levels (full OQ, partial OQ, or verification) and ensure compliance through oversight of remediation activities. Preventative Maintenance Program: Define PM requirements for all AM equipment, including verification items, intervals, measurement protocols, and documentation requirements. Collaborate with Operations on PM plan development and execution. Ensure PM activities are traceable and that any findings are assessed for impact to qualification status. New Product Introduction (NPI): Collaborate with Applications and M&P teams to support launch of new AM components through APQP, PPAP, and AS9102 First Article Inspection. Define quality requirements and acceptance criteria for NPI. Ensure process readiness, qualification completeness, and compliance prior to production ramp-up. Design for Additive Manufacturability (DfAM): Collaborate with engineering teams to provide quality and manufacturability input, including build orientation, support strategy, downskin parameter effects, and as-built surface finish implications. Represent process capability and quality risk during design reviews. Continuous Improvement: Define quality improvement priorities across AM operations. Collaborate with M&P and cross-functional teams on execution of improvement initiatives using Six Sigma, FMEA, SPC, and Lean methodologies. Ensure gaps in process capability, measurement systems, and documentation are identified and closed. Team Leadership: Build and lead a team of AM quality engineers. Set execution cadence, coach technical development, and ensure fast, rigorous response to quality issues. What We’re Looking For: Bachelor's degree in Engineering (Mechanical, Materials, Industrial, or related); Master's degree is a plus. 8+ years of experience in additive manufacturing quality engineering, with direct, hands-on experience qualifying equipment and processes for aerospace, defense, or spaceflight applications. Deep expertise in at least one of the following AM modalities, with working knowledge of the other: (a) Laser Powder Bed Fusion (PBF-LB), including machine qualification, laser diagnostics, and powder management; or (b) Directed Energy Deposition (DED), including WAAM process qualification, arc-based process controls, and wire feedstock management. This role will be responsible for qualification across both modalities. Demonstrated experience executing IQ, OQ, and MQ on AM machines, including build layout design, test plan development, and material property evaluation. Deep working knowledge of AMS 7003, AMS 7032, and AMS 7002, including process control documents, KPV identification and control, and powder management requirements. Experience qualifying AM equipment to AMS 7032, NASA-STD-6030, NAVSEA Technical Publications for PBF and/or DED, or to prime customer AM specifications with equivalent rigor. Hands-on experience with laser power measurement, beam caustic/profiling equipment, and interpretation of beam quality data (spot size, M2, thermal shift, location of focus, astigmatism). Hands-on experience with gas flow measurement methods and characterization of shielding gas performance across build platforms. Strong understanding of powder metallurgy, including powder quality requirements, particle size distribution, chemistry, morphology, lot control, reuse methodology, and contamination prevention per AMS 7002 and AMS 7031. Familiarity with wire feedstock quality requirements for DED/WAAM processes. Skilled in root cause analysis (8D, 5 Whys, Fishbone), CAPA, and nonconformance management. Deep understanding of AS9100, Nadcap for AM, GD&T, PPAP, APQP, FMEA, and SPC. Excellent communication and cross-functional leadership abilities. Willing to travel up to 20%, primarily within the U.S., with occasional international travel. U.S. Citizen or Permanent Resident (required for ITAR compliance). What Will Set You Apart: Experience with WAAM qualification for U.S. Navy applications, including familiarity with NAVSEA qualification requirements, technical warrant holder approval processes, and the Navy's Additive Manufacturing Center of Excellence (AM COE) in Danville, VA. Familiarity with DED-specific standards including AWS D20.1, AMS 7004, AMS 7005, and ASTM F3187. Familiarity with the NIAR Operational Qualification Guidance Document and related NIAR/America Makes work on AM machine qualification methodology. Awareness of the JAQS-SQ (Joint Additive Qualification for Sustainment, Supplier Qualification) program and its implications for DoD AM supplier readiness. ASQ Certified Quality Engineer (CQE), AS9100 Lead Auditor, or Six Sigma (Green/Black Belt). Familiarity with AM standards such as ASTM F42, ISO 52900, SAE AMS 7XXX Series, and Nadcap requirements for AM. Active involvement in standards committees (e.g., ASTM F42, SAE AMS, ISO TC 261). Experience with AM in-situ process monitoring (meltpool monitoring, optical tomography, recoat monitoring) and its application to quality assurance. Experience with CT scanning, metallurgical analysis, and advanced NDE methods for AM parts. Understanding of multi-laser systems, laser zone strategies, stitching qualification, and scan field calibration for multi-laser LPBF platforms. Proven leadership in team-building and quality system development in fast-paced or startup environments. Knowledge of other manufacturing processes (e.g., CNC, casting, welding, composites). Experience transitioning AM products from R&D to full-scale production. Proficiency with digital QMS, inspection software, and PLM platforms. Compensation: For this role, the target salary range is $220,000 - $250,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulati

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Powder Bed Fusion Additive Manufacturing team is pushing the boundaries of what's possible in rocket propulsion hardware. Responsible for development, process, and production, the team oversees initial concept to final hardware with rigorous quality and precision. From developing print parameters on state-of-the-art 3D printers to enabling fast iteration for partner departments, the team plays a critical role in taking engine designs from concept to hot fire. The team was instrumental in producing Aeon 1 engines for Terran 1 launch and is now pioneering next-generation processes and designs for our Aeon R engines that will power Terran R. With flight hardware production scaling up rapidly, now is the time to join and make a direct impact. About the Role: Relativity Space is seeking a highly skilled Senior Heat Treat Process Engineer to own and optimize heat treatment processes for additively manufactured parts and welded assemblies. This hands-on role requires technical expertise in aerospace heat treatment, process development, and the ability to drive innovation in a fast-paced manufacturing environment. You'll spend significant time on the manufacturing floor working with furnaces, technicians, and cross-functional teams to establish world-class heat treatment operations for next-generation rocket components. Key Responsibilities • Own heat treatment processes for L-PBF additively manufactured Inconel 718 parts and welded assemblies, including development and validation of heat treatment recipes (solution annealing, aging, HIP) through material testing (hardness, tensile, microstructural evaluation), • Drive experimentation and innovation beyond industry standards to meet production goals while maintaining aerospace quality requirements, • Author and maintain process specifications and SOPs in compliance with NADCAP and AS9100 requirements, including temperature uniformity surveys, furnace calibration records, and process validation documentation, • Lead root cause analysis for thermal processing non-conformances and develop corrective/preventive actions to prevent recurrence, • Provide training, guidance, and technical support to heat treat technicians while collaborating with materials, quality, and manufacturing teams to resolve issues and implement improvements, • Interface with suppliers and vendors for heat treatment equipment and services, • Manage equipment calibration schedules, conduct temperature uniformity surveys, and identify infrastructure needs for capital equipment improvements, • Design efficient shopfloor workflows with visual management systems to clearly identify part status and required heat treatment cycles, optimizing throughput and first-time quality About You: • Bachelor's degree in Materials Science Engineering, Mechanical Engineering, or Manufacturing Engineering, • 5-7+ years of heat treatment process engineering in aerospace manufacturing with proven NADCAP and AS9100 experience, • Deep understanding of heat treatment metallurgy for nickel-based superalloys (solution annealing, precipitation hardening, stress relief, HIP), • Knowledge of aerospace heat treatment specifications (AMS2774, AMS2750) and additive manufacturing (L-PBF) heat treatment requirements, • Understanding of furnace Installation qualification, calibration, temperature uniformity surveys, and thermal processing equipment management, • Hands-on vacuum furnace operations, cycle development, and process validation, • Experience with technical writing: Specification, SOP, work instructions, • Experience training and working with manufacturing technicians Nice to haves but not required: • Advanced degree (MS/PhD) in Materials Science, Mechanical Engineering, or Manufacturing Engineering, • Material characterization proficiency including hardness testing, tensile testing per ASTM E8, and metallographic evaluation At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$122,000—$167,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Hadrian's Controls Engineering team develops 0-1 automation solutions to supercharge the efficiency and capabilities of our CNC machines. The team focuses on developing novel solutions for automated probing validation, machine calibration, in-process control, tool laser measurement, breakage detection, tool life, offsets, and origins. We are looking for a Controls Engineer to execute our Machining roadmap to scale Hadrian to be multi-factory across the US. You will work closely with Applications Engineering, CAM Operations, Software Engineering, and Robotics to push the boundaries of machining at scale and we are looking to add a curious and self-motivated expert to join our already world class team. What You’ll Do Universal Controller Interface – Develop a universal controller interface for CNC machines to streamline operations and ensure interoperability across diverse machining platforms. Inspection and Process Control – Utilize spindle probing to revolutionize inspection and process control, enhancing precision and efficiency. Integrated Feedback Loop – Innovate an integrated CMM<>CNC feedback loop, bridging the gap between measurement and control in machining processes. Operator Enablement - Develop systems that empower operators in advanced machine control, minimizing human and lowering the barrier to entry for CNC manufacturing Process Development - Support cross-functional teams by engineering processes that expand and enhance on-machine capabilities. What We’re Looking For Macro Programming – Experience writing macros for in either Fanuc, Siemens, or Heidenhain CNC Machine Operation – Ability to run and operate CNC machines including part setup, tool loading, tool offsets, spindle probing Software – Experience coding with an understanding of software principles, including Python, data structures, version control (e.g. GitHub), and testing. Communication – Excellent communication skills both written and verbal. Machining Knowledge – Has applicable experience with a variety of machine types (mills, lathes), materials (alum, stainless, hard metals), tooling application, workholding, and fixture design. What Will Set You Apart Experience with PLC programing, software engineering, electrical engineering, mechanical engineering, or robotics Experience with hyperMILL, Heidenhain, Fanuc, NX, machining Inconel or Titanium, macro programming Strongly admired skills - System design, mechanical design, operational experience, and the ability to bridge hardware and software disciplines. Compensation For this role, the target salary range is $130,000 - $220,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Mechanical Engineer (Spacecraft Hardware) Launch has changed the economics of space. Now it is time to return. Outpost is building the missing infrastructure between orbit and Earth: reusable vehicles that can bring payloads back from space and deliver them to a precise location within hours. We call it exologistics, space-to-Earth logistics at planetary scale. This is not a paper concept or a distant roadmap. Our system is in active development, with core technologies advancing toward flight readiness. The need is already here and the market has responded. We have validated demand through multiple defense and civil agreements, and a growing pipeline across government and commercial customers. Outpost is building the logistics layer that makes space economically useful in a new way: the ability to move material from orbit to Earth quickly, reliably, and affordably. Over time, that supports point-to-point logistics, 10 tons of cargo, anywhere on Earth in an hour. It also creates the foundation for a reusable reentry network and enables new categories of space activity, including in-space manufacturing, supporting AI data centers, advanced manufacturing and novel materials. We have a strong foundation, clear demand, and a technical path in front of us. Now the company is scaling rapidly. We are expanding the team, growing our operational footprint, and building the systems needed to execute at the next level. This is a chance to join a company with real traction, working on a problem that matters, at the point where execution and scale begin to define the outcome. The Role We are looking for a Mechanical Engineer who will own the mechanical test and qualification process for spacecraft components and vehicles from concept through execution and data analysis. This is a deeply mechanical role with elements of mechatronics, instrumentation, and software for data acquisition, with strong ownership over how our hardware is qualified for flight. You will design and build test fixtures and portable test racks, define test plans (qualification, acceptance, drop, load, vibration, deployment, etc.), execute tests, and analyze results to inform design and certification decisions. Rather than "pressing the button" on pre‑defined procedures, you will create new tests and infrastructure for new products in a fast‑moving space startup environment. Responsibilities • Own mechanical test and qualification activities for spacecraft components and vehicles, from requirements interpretation through test execution and reporting., • Develop test strategies and plans for qualification tests, acceptance tests, drop/load tests, deployment tests, and other space‑relevant environments., • Design, model, and document mechanical test fixtures, jigs, stands, and custom setups (e.g., for heat shield, mechanisms, and structural testing)., • Architect and help implement portable test racks integrating power supplies, sensors, data acquisition, and control hardware into organized, reusable systems., • Define instrumentation approaches (load cells, strain gauges, displacement, pressure, temperature, etc.) and work with electrical teammates to integrate sensors and wiring., • Implement and/or specify data acquisition and control software using tools such as LabVIEW, Python, or MATLAB for test automation and data collection., • Perform data reduction and analysis to extract key metrics, identify anomalies, and drive design or test configuration changes., • Create and maintain clear test documentation: test procedures, configuration drawings, calibration records, data packages, and test reports aligned with NASA‑style standards., • Read and interpret mechanical drawings and basic circuit/connection diagrams to ensure correct test configuration and boundary conditions., • Collaborate closely with design, systems, and manufacturing engineers to ensure tests meaningfully qualify hardware and trace back to requirements., • Contribute to the development of internal test standards and best practices, leveraging NASA and industry qualification guidelines as the "test bible.", • Provide technical leadership on test approach and infrastructure (technical management), even if you do not directly manage people. Qualifications • Bachelor's or higher degree in Mechanical Engineering, Mechatronics, or a related field, or equivalent practical experience in hardware test development., • Strong, hands‑on mechanical background with experience designing and building test fixtures, stands, and mechanical setups for hardware tests., • Experience developing or significantly contributing to new tests for aerospace, space, or similarly high‑reliability hardware (not just operating existing, legacy rigs)., • Familiarity with spacecraft or launch vehicle components, or other space/aviation hardware where qualification and reliability are critical., • Comfort working with sensors and instrumentation (wiring, basic electrical understanding) sufficient to own test setups without being an electrical engineer., • Experience with data acquisition and analysis using at least one of: LabVIEW, Python, MATLAB, or similar tools., • Ability to read and understand mechanical drawings (and basic circuit diagrams) to set up tests correctly and understand what is being verified., • Demonstrated ownership of end‑to‑end test efforts: planning, setup, execution, troubleshooting, and reporting., • Strong documentation habits and familiarity with following structured standards and guidelines (e.g., NASA‑style test and qualification documents)., • Willingness to be hands‑on in the lab, build things from scratch, and iterate quickly in a startup environment. We are less focused on minimum years of experience and more interested in candidates who have truly developed tests and infrastructure themselves, rather than only operating pre‑defined procedures at large, highly bureaucratic companies. Preferred Experience • Experience in space startups or new‑product aerospace programs (rockets, satellites, spacecraft mechanisms) where tests were created from scratch., • Prior work with portable test racks or integrated test benches combining power, DAQ, and control in a cohesive system., • Familiarity with NASA test/qualification standards and ASME Y14.5 drawing conventions at a functional level. Compensation & Benefits • Competitive compensation: $120,000 – $180,000; (commensurate with experience)., • Additional Compensation: Annual performance-based bonuses that reward your impact., • Shared upside: Meaningful equity in Outpost so you share directly in the value you help create., • Comprehensive healthcare: Medical, dental, and vision coverage to keep you and your loved ones covered. We cover the base tier of medical insurance and all premiums of vision and dental., • Protection when it matters: Company-provided short- and long-term disability coverage for peace of mind, plus life insurance for even more security., • PTO: Recharge on your own terms with paid time off, plus 9 days of paid holidays., • Invest in your future: 401(k) with company match to help you build long-term wealth., • Fueled for the mission: Daily DoorDash lunch stipend, plus unlimited snacks, coffee, and tea to keep you energized., • Mission that matters: Work shoulder-to-shoulder with leaders from aerospace, new space, and deep-tech industries building the future of orbital infrastructure., • Pet Friendly Office: Bring your furry friend into the office so that they can be a part of our mission too., • Monthly Company Happy Hours and Events: Drinks at the local bar, hibachi nights, mini golfing and more!

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Hadrian’s Robotics team builds hardware and software that powers next-generation manufacturing. We are looking for a Senior Robotics Software Engineer to lead the design, development, and deployment of intelligent automation systems for manufacturing environments. Our mission is to scale Hadrian’s core machining business across multiple factories in the U.S. by building robotic systems that operators, technicians, and systems depend on every day. We move quickly, ship continuously, and turn real factory needs into production-ready products. What You’ll Do Lead software design and development for robotic automation systems used in manufacturing and industrial environments. Collaborate with cross-functional teams (hardware, electrical, and mechanical) to ensure tight integration between software and physical components. Integrate software with hardware systems, including PLCs, sensors, actuators, and industrial robots. Develop and deploy algorithms for calibration, path optimization, object detection, and collision avoidance. Interface with manufacturing operations to test, validate, and continuously improve deployed robotic systems. Participate in reviews and help shape engineering quality and best practices. What We’re Looking For Bachelor’s or Master’s degree in Computer Science, Robotics, Electrical Engineering, or a related field with at least 5 years of developing software for industrial or manufacturing robotics systems. Strong proficiency in C++ or Python. Experience with motion control, trajectory generation, and robot kinematics/dynamics. Experience leading cross-disciplinary teams and full product lifecycle ownership. Excellent communication and documentation abilities. Passionate about advancing manufacturing automation through robotics innovation. Compensation For this role, the target salary range is $160,000 - $260,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionDescriptionAs a Dynamics Test Engineer at Impulse, you will play a critical role in designing, planning, and executing vibration and environmental testing to ensure product reliability, performance, and compliance with industry standards. The ideal candidate has hands-on experience with vibration testing equipment, strong data analysis skills, and the ability to collaborate across multidisciplinary teams. Responsibilities • Plan, prepare, and execute vibration and shock tests (sine, random, and combined environments), • Set up, operate, maintain, and troubleshoot vibration test equipment, including electrodynamic shakers, slip tables, and associated control systems and facility infrastructure, • Develop detailed test plans, procedures, and instrumentation setups in alignment with project requirements and applicable standards (e.g., MIL-STD-810, NASA GEVS, DO-160), • Monitor and control test execution, ensuring accurate data collection and safe operation, • Analyze test data, generate technical reports, and communicate results and recommendations to relevant engineering teams, • Collaborate with design and dynamics engineers to refine product designs, • Ensure compliance with safety, quality, and regulatory requirements during all test operations, • Support the continuous improvement of test processes, equipment calibration, and lab infrastructure Minimum Qualifications • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or related field, • 3+ years of direct experience in vibration and shock testing for aerospace, automotive, or related industries, • Proficiency with vibration test systems, vibration controllers, and data acquisition systems, • Proficiency in data analysis using MATLAB, Python, or similar tools, • Excellent technical writing and documentation skills, • Strong problem-solving and troubleshooting capabilities Preferred Skills and Experience • Master’s degree in a relevant engineering discipline, • Strong understanding of environmental test standards (MIL-STD-810, DO-160, NASA GEVS, etc.), • Experience in aerospace hardware qualification and flight hardware certification testing., • Knowledge of structural dynamics and finite element analysis (FEA), • Familiarity with other environmental tests (thermal, acoustic, EMI/EMC), • Ability to manage multiple test campaigns in a fast-paced environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionFurientis is building a new class of defensive interceptor missile for the United States and its allies. We design, build, and produce these systems end-to-end, from physics through manufacturing, at production rates legacy primes cannot match and at a fraction of the cost. We recruit engineers who internalize the warfighter's problems and bring deep mastery of the relevant technologies, without the institutional inertia that has slowed the legacy primes. Work done at Furientis has meaning. About the Team The Seeker Team builds the eyes and the targeting logic of our weapon system: a low-cost, mass-producible, multimodal missile seeker that leans on commercial supply chains where they outperform the defense legacy, with supply-chain security engineered in from day one. On a modern missile, the seeker is 40 to 60% of unit cost and often drives overly long delivery cycles; accordingly, the seeker team is at the tip of the spear for delivering value to our customers and to the taxpayer. Seeker design has exactly two real constraints: physics and mission. Supply chain, vendor lead time, qualification cost, "the way it's always been done": none of that stops us. We are a small, deeply technical team that drives capability through ingenuity and bias for action and ships hardware that flies. This is a wear-many-hats environment where you must be comfortable "building the airplane in flight" and stepping well outside your comfort zone; a narrowly scoped role with clean handoffs is not what this team offers. This is an AI-native team. Through fluent use of cutting-edge agentic coding tools, one engineer here consistently out-delivers a much larger conventional team. You will have opinions about where these tools help and where they do not, provide governance input, and build AI into your workflow from day one. About the Role You will be the responsible engineer for the optical and opto-mechanical subsystem of our seeker: lens prescriptions (with optical designers), mounts, athermalization, FPA interface and detector thermal solution, cold stops, windows and domes, packaging, alignment, calibration, and qualification, and you will execute the day-to-day work that gets that design built, integrated, qualified, and into volume production. You report to the seeker lead, who carries final technical authority. Bring deeply considered design options, error budgets, and trade-study results when a decision needs to be made, then execute with rigor and speed. This is a hands-on role for an engineer who has already taken optical hardware from concept through environmental qualification (ideally tactical, airborne, or missile-class) and is ready to do it again, faster and at higher volume. What You'll Do • Drive the opto-mechanical design of the LWIR seeker head: lens stack, mounts, baffles, cold stops, window and dome, FPA interface, detector thermal solution, packaging, and alignment., • Partner with optical designers on lens prescriptions; review designs in Zemax or Code V and reason about Seidel/Zernike aberrations from first principles., • Own design-constraint definition and error-budget optimization across the optical column; flow tolerances down to suppliers and up to the system performance model., • Develop athermalized mounts, bonded and elastomeric interfaces, and window/dome assemblies that survive the high-g, wide-temperature, vibration, and shock environment of a tactical seeker., • Integrate the FPA thermal solution (heat spreaders, heat pipes, TECs, cold stops, cold-shield interface) to hit detector NETD, dwell-time, and cool-down targets within tight volume and power budgets., • Build full optical tolerance budgets (Monte Carlo and worst-case) across manufacturing, alignment, thermal, packaging, and aging effects., • Qualify suppliers for IR optics, AR coatings, windows, and domes; bring DFM and design-to-cost recommendations across material choices (Ge, Si, ZnSe, chalcogenide)., • Develop alignment, bonding, and assembly procedures suitable for high-rate production, not one-off lab builds., • Build and execute the optical metrology and test approach: interferometry, MTF, encircled energy, boresight, transmission, and stray light., • Plan and execute environmental qualification per MIL-STD-810 and program-specific environments (vibration, shock, thermal, humidity, altitude, EMI/EMC, salt fog, sand/dust, high-g)., • Stand up bench fixtures and integration test setups: solder eval kits and breakout boards, bring up SBC/SoM carrier boards, and stitch together the sensor, power, and I/O plumbing.Skills We're Hiring For, • B.S. in Optical Engineering, Mechanical Engineering, Physics, or related; M.S. preferred., • 7 to 9 years of hands-on IR or precision optical hardware design and integration, with responsibility for an opto-mechanical assembly from CAD through environmental qualification., • Understanding of geometric and wave optics from first principles, including working fluency with Seidel and Zernike aberration formalisms; able to diagnose an aberrated system at the bench., • Working fluency with Zemax or Code V; reads and reviews prescriptions and tolerance flowdowns competently., • Strong CAD (SolidWorks, NX, or Creo) and GD&T to ASME Y14.5., • Hands-on optical metrology and test: benchtop interferometry (Fizeau, Twyman-Green, or equivalent), MTF, encircled energy, boresight, focal-plane mapping, transmission, stray light., • Athermal design, error-budget construction, tolerance analysis, and bonded/elastomeric optical mounting for IR systems, including window and dome design., • Optical packaging from CAD assembly to a volume-producible, environmentally qualified package, including detector thermal integration., • System hardening and survivability testing of optical systems for tactical, airborne, or munition-class environments per MIL-STD-810., • Hands-on MWIR and/or LWIR phenomenology: radiometry, atmospheric transmission, target/background signatures, NETD, and sensitivity-budget reasoning sufficient to defend seeker performance claims., • Demonstrated history of building and managing vendor relationships across the IR optical-hardware supply chain. Candidates without a real working network in IR optics will not be considered., • Bias for low-cost, ingenious optical-hardware solutions: a track record of meeting requirements at meaningfully lower unit cost than the legacy approach., • AI-native working style: daily use of agentic coding tools (Claude Code, Codex, OpenCode, Kilo, or similar) for tolerance scripting, supplier comparisons, drawing markup, and report generation., • Electronics competency: comfortable soldering eval kits, bringing up SBC/SoM carrier boards, and stitching together basic edge-hardware benches and test fixtures well enough to make things work end-to-end.Bonus Points For, • Direct LWIR (8 to 14 µm) optical assemblies in a tactical or airborne product., • High-g optical assembly experience (sustained launch loads or hard-impact events)., • Production transition: moved an optical assembly from prototype to volume manufacturing., • IR coatings expertise (DLC, hydrophobic, AR)., • Stray-light analysis with FRED, ASAP, or TracePro., • Direct missile, munition, or seeker program experience., • Hobbyist drone build and flight experience that translates to packaging, vibration, and field-handling intuition. Eligibility & Logistics Location: On-site at our Los Angeles, CA HQ; remote work is not available. Monthly weekend travel for test events and supplier engagements. Clearance: Must be a U.S. Person and eligible to obtain a U.S. SECRET security clearance. Active clearance is not required at hire; we will sponsor. Equal Opportunity & Export Compliance Furientis is an equal-opportunity employer. To comply with U.S. export control laws, employment is contingent on eligibility to access export-controlled information. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role: Join us in shaping the future of aerospace and defense manufacturing. As an Additive Manufacturing Engineer - Applications focused on Directed Energy Deposition (DED), you will serve as a technical bridge between customer requirements and production-ready DED manufacturing solutions. You will work closely with customers and internal teams to evaluate part feasibility, guide Design for Additive Manufacturing (DfAM), support process development, and help scale DED programs from early engagement through qualification and production. This is a hands-on, customer-facing engineering role at the intersection of applications engineering, manufacturing execution, and process development. You will help solve real-world DED manufacturing challenges, convert those solutions into repeatable manufacturing methods, and support the successful launch of high-impact aerospace and defense programs. What You’ll Do: Customer Technical Support & Requirements Capture: Support technical engagement with customers by gathering requirements, clarifying design intent, and translating program needs into actionable manufacturing plans that align customer requirements with feasible DED manufacturing solutions. Program Feasibility & Application Development: Evaluate part and program fit for DED, identify technical risks, and support new application development, process selection, and manufacturing planning for critical hardware and production opportunities. DfAM & Design Reviews: Provide DfAM guidance specific to DED, including deposition strategy, feature design, access constraints, heat input considerations, distortion risk, machining stock, and post-processing-aware design decisions. Manufacturing Workflow & Build Planning: Define and optimize manufacturing workflows across design, deposition, post-processing, inspection, and certification, while supporting toolpath strategy, setup planning, and production readiness. DED Process Development & Industrialization: Partner with internal process and manufacturing teams to develop, mature, and industrialize DED capabilities, including equipment readiness, process windows, parameter refinement, and transition from development to repeatable production. Robustness, Repeatability & Process Improvement: Identify and drive improvements that make DED platforms and workflows more robust and repeatable based on machine behavior, deposition quality, process data, nonconformance trends, and production performance. Materials & Process Integration: Work closely with materials and quality teams to evaluate weldability, heat input effects, residual stress, mechanical performance, geometric accuracy, and surface condition to refine process parameters and manufacturing guidance for high-performance alloys. Post-Processing & Secondary Operations Integration: Coordinate across stress relief, heat treat, HIP where applicable, machining, inspection, and finishing to ensure end-to-end manufacturability and downstream process alignment. Qualification & Validation Execution: Support qualification planning, validation builds, coupons, test plans, NDT strategy, acceptance criteria definition, first article activities, and data package development required for customer approval and production release. Data, Traceability & Documentation: Maintain clear engineering documentation, process records, work instructions, specifications, and traceability artifacts, and support process control plans, calibration routines, and reporting workflows required for quality and production execution. Technical Problem Solving: Investigate machine, process, and part quality issues using structured root cause analysis and sound engineering fundamentals, disposition nonconforming hardware as needed, and support corrective actions that improve yield, consistency, and cost. Cross-Functional & External Coordination: Work closely with Additive Manufacturing, Manufacturing Engineering, Quality, Materials, Supply Chain, and Operations, while coordinating with machine OEMs, materials suppliers, external processors, test labs, and contract manufacturers as needed. Best Practices, Standardization & Safety: Capture lessons learned, develop best practices for DED equipment and processes, improve standard work and design guidance, support make-buy and technology assessment activities, and identify opportunities to improve safety throughout the manufacturing workflow. Technical Communication: Present technical recommendations, trade studies, risk assessments, and status updates clearly to internal stakeholders and customers, and support technical reviews, supplier visits, and broader representation of DED capability when needed. What We’re Looking For: Bachelor's degree in Engineering, Mechanical, Materials, Aerospace, Manufacturing, Welding, or related field. 4+ years of experience in additive manufacturing, manufacturing engineering, applications engineering, process engineering, or development of metallic additive technologies, preferably with DED. Hands-on knowledge of metal DED processes and production workflow, including design considerations, pre-process planning, deposition, post-processing, inspection, and qualification. Experience with DfAM principles specific to DED and the interaction between deposition strategy, machining, distortion control, and downstream manufacturing performance. Working knowledge of welding metallurgy, heat input control, residual stress management, and mechanical performance in deposited metallic structures. Experience working with engineering drawings, GD&T, tolerance interpretation, and inspection planning. Experience supporting part development from prototype through qualification or early production. Strong problem-solving skills with the ability to analyze technical issues and recommend practical solutions. Ability to communicate effectively with customers, engineers, technicians, suppliers, and cross-functional teams. Willingness to travel up to 15-20%, primarily within the U.S. U.S. Citizen or Permanent Resident required for ITAR compliance. What Will Set You Apart: Experience supporting aerospace and defense applications in regulated manufacturing environments, including qualification of flight-critical or mission-critical hardware. Experience with process validation, qualification planning, capability studies, statistical process control, multifactorial DOE, or first article execution. Familiarity with aerospace manufacturing standards and quality systems, including NASA, ESA, AS9100, EN9100, or comparable customer requirements. Experience with wire-based DED processes, with familiarity across powder-fed DED or adjacent metal AM technologies. Experience with robotic toolpath programming, CAM systems, welding simulation tools, or thermal-mechanical modeling relevant to DED. Metallurgical experience with copper alloys, nickel-based superalloys, titanium, aluminum, or other high-performance alloys relevant to DED. Experience with metrology, NDT, heat treatment, and process control methods used for DED hardware qualification. Experience with machine OEMs, materials suppliers, software providers, external processors, or contract manufacturers supporting additive workflows. Working knowledge of complementary conventional manufacturing processes such as CNC machining, casting, forging, and welding. Experience with ERP, MRP, MES, or production planning systems such as SAP or similar tools. Compensation: For this role, the target salary range is $135,000 - $200,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionDescription: Advanced Cooling Technologies, Inc. (ACT), located in Anaheim, CA and headquartered in Lancaster, PA, is a leading manufacturer of innovative thermal management products serving a broad range of industries, including commercial satellites, military vehicles, medical devices, primary calibration equipment, and HVAC systems. Recognized as one of the “Best Places to Work” in PA, ACT is committed to fostering creativity, innovation, and making a meaningful impact every day. Guided by our core values of Innovation, Teamwork, and Customer Care, we are dedicated to developing world-class products and quality systems that support both commercial and government customers. Our continued growth is driven by technical excellence, operational discipline, and the strength of our people. Position Summary This position is for a Quality Engineer at our Anaheim, CA facility, reporting to our Quality Manager. The Quality Engineer will perform a variety of operational functions that constitute the production, inspection and distribution of products or services for commercial and/or government customers. Responsibilities • Provide quality engineering support throughout all phases of product development, • Support manufacturing and development teams with process mapping, controls, SOPs, CAPA, inspections, and test procedures, • Develop inspection and testing strategies (tooling, fixtures, gauging, equipment) for incoming, in-process, and final inspections, • Maintain and control quality documentation, • Support supplier quality through inspections, root cause analysis, and corrective actions, • Plan and assist with quality audits to ensure compliance with QMS (ISO 9001 / AS9100), • Perform First Article Inspections (AS9102) and final inspections as required, • Lead and support corrective action programs, including customer complaints and returns, • Oversee calibration, internal audits, and AS9100 management reviews, • Conduct risk assessments, FMEA, and control plan development, • Review and approve quality system procedures, • Manage nonconforming materials and engineering change processes (ECNs, CMAS), • Support product testing and overall quality program initiativesRequirements:, • BS in engineering or technical field., • Minimum of five years of QA experience in a regulated industry, aerospace industry preferred., • Knowledge of quality system regulations/requirements., • Experience with continuous improvement methodologies such as Lean Manufacturing, Six Sigma, CAPA, etc., • Understanding of statistical techniques (SPC, DOE, ANOVA, probability theory, sampling distributions, Minitab, etc.), • Experience in GD&T. ACT offers competitive pay, excellent benefits (medical, dental, vision, paid time off, holidays, company-paid life & disability insurance, 401(k) match, and profit-sharing), and a supportive team environment. ACT is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other protected characteristic. ACT participates in E-Verify. California Applicants: ACT collects personal information for hiring purposes. California residents may have rights under the CCPA/CPRA. Contact HR at barbara.rockwell@1-act.com.

Job Description CNC Manufacturing Engineer - Build the Future of Advanced Manufacturing Hawthorne, California | On-site Opportunity Summary A venture-backed advanced manufacturing startup is developing next-generation production technologies that enable faster, higher-quality fabrication of complex engineered components. The team is focused on solving longstanding manufacturing challenges through innovative processes that improve performance, scalability, and production efficiency across aerospace, defense, energy, and industrial applications. As a CNC Manufacturing Engineer, you will play a hands-on role in machining high-precision tooling, molds, fixtures, and prototype components that support both product development and production efforts. This position offers the opportunity to own machining operations from programming through finished part delivery while working closely with engineers to improve manufacturability and production readiness. The role is ideal for someone who enjoys operating at the intersection of design, manufacturing, and shop-floor execution. About Us We are an early-stage manufacturing technology company focused on transforming how advanced engineered products are designed and built. Our team combines expertise in engineering, automation, and production systems to develop scalable manufacturing solutions for demanding industries. We move quickly, value ownership, and prioritize practical execution that delivers measurable results. Job Duties • Program, set up, and operate CNC machining equipment to manufacture molds, tooling, fixtures, and prototype components, • Own machining projects from CAM programming through final part completion, • Produce high-precision components while meeting aggressive development and production schedules, • Collaborate closely with engineering teams to provide manufacturing feedback and improve design-for-manufacturing outcomes, • Select and optimize tooling, cutting strategies, and machining processes for a variety of materials, • Support tooling development, repair, maintenance, and continuous improvement efforts, • Assist with shop capacity planning, material procurement, and tooling standardization initiatives, • Develop and maintain CAM workflows, templates, and fixturing approaches to improve repeatability and efficiency, • Maintain equipment calibration and support overall machine uptime, • Communicate project status, manufacturing risks, and schedule impacts clearly across teams, • Contribute to a safe, organized, and professional manufacturing environment Qualifications • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related technical discipline, or equivalent practical experience, • 2+ years of CNC machining experience, • Experience operating CNC mills and lathes, • Proficiency with CAD/CAM software such as Fusion 360, Mastercam, Onshape, or similar platforms, • Ability to interpret CAD models, engineering drawings, GD&T requirements, and manufacturing specifications, • Strong attention to detail and commitment to producing high-quality work, • Effective communication and collaboration skills, • U.S. Person status in accordance with applicable export control regulations Preferred Experience • Mold-making experience, • High-precision machining experience, • Complex 3D surfacing and advanced CAM programming, • Prototype development or low-volume manufacturing environments, • Composite tooling or advanced materials manufacturing, • Experience developing machining standards, templates, or scalable production workflows, • Exposure to production planning, machine utilization, or manufacturing operations management Why Join Us • Opportunity to help scale a breakthrough manufacturing technology from early development into production, • Direct ownership over critical manufacturing processes and tooling development, • High visibility across engineering and manufacturing teams, • Exposure to advanced manufacturing methods and emerging technologies, • Clear growth opportunities into machine planning, capacity planning, and manufacturing leadership roles, • Fast-paced startup environment where individual contributions have immediate impact Compensation Details $90,000 - $125,000 #LI-AV

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose This role serves as the technical bridge between design/manufacturing engineers and the production team, with a core focus on developing scalable, high-reliability automated, machining, & inspection processes. This person is responsible for driving process improvements, solving complex production challenges, and helping to eliminate part flow blockers. Rather than simply supporting products, this engineer leads process innovation enabling rapid iteration, increasing production efficiency, and helping scale Divergent's capabilities to meet program demands. The Role As the Advance Manufacturing engineer, you will lead the development, execution, and continuous improvement of day-to-day operations for machining, automated assembly, automated anodize, inspection, & cleaning work centers. You'll be one of the primary technical resources supporting these areas with troubleshooting production issues, refining the processes, and enabling scalability through smart programming, tooling/fixturing, documentation, and workflow improvements. This role is hands-on, fast-paced, and essential to delivering high-precision, high-reliability hardware across automotive, aerospace, and defense programs. The ideal candidate is well versed in aerospace production environment and has direct experience with supporting the production floor, DFM, machining, assembly, coating, metrology, & thrives on solving complex shop floor problems, and brings a strong process mindset to drive quality, speed, and consistency. Key Responsibilities Operations Support • Own daily production execution, working directly with production floor to resolve issues, and ensure steady throughput., • Develop and implement best practices, processes, strategies, and calibration procedures to improve operational capacity., • Monitor utilization and WIP flow through the work centers, help push/pull work as needed to maintain alignment with production targets. Technical Execution • Act as the technical bridge between design/manufacturing engineering and production teams., • Lead development, execution, and continuous improvement of machining, automated assembly, automated anodize, inspection, and cleaning work centers., • Collaborate on programming for 3-axis, 3+2, and 5-axis CNC mills using Siemens NX CAM software., • Provide feedback using advanced understanding of GD&T, tooling, feeds/speeds, and fixturing., • Introduce standardized strategies, programming conventions, and setup documentation to improve consistency and reduce cycle time., • Leverage metrology and inspection expertise to drive quality assurance in production. Process Development & Scalability • Help lead efforts to integrate new machines, equipment, tools, and fixturing into production; support commissioning., • Co-Drive design-for-manufacturing (DFM) conversations with Manufacturing engineering to improve part manufacturability and reduce complexity at the machine., • Develop and implement innovative fixturing strategies tailored for complex additive manufactured geometries., • Support integration of automated machining technologies to enhance scalability and precision. Continuous Improvement & Documentation • Analyze data to identify trends, inefficiencies, and root causes of scrap or delays; implement corrective actions and process improvements., • Create and maintain detailed documentation to ensure consistency and repeatability across shifts and teams., • Collaborate with software and data teams to integrate production metrics and feedback loops into real-time dashboards and planning systems. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering, or equivalent hands-on experience, • 8+ years of experience in aerospace or defense industries., • Hands-on experience with advanced manufacturing techniques, including additive manufacturing, robotics, coatings, & inspection/quality, • Direct experience with machining, additive manufacturing, coatings, & inspection/quality., • Proficiency in CAD/CAM software (e.g., Siemens NX, AutoCAD,), • Advanced knowledge of CNC machining, structure assembly, GD&T, tooling, & metrology., • Experience evaluating, selecting and commissioning of machines to meet manufacturing capabilities., • Excellent problem-solving skills and ability to innovate in a fast-paced environment., • Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams., • Ability to work on multiple projects and initiatives in parallel Preferred Qualifications, • Master's degree in mechanical, manufacturing, or aerospace engineering., • Experience with robotic machining systems and calibration methodologies, • Experience with manufacturing automation in automotive or aerospace environments Work Environment, • This is a hands-on position that will require standing for long durations of your day and working directly with hardware on the floor., • Must be comfortable stooping, bending, and standing., • Position may require occasional travel, long hours or weekend work. Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E03 - E05 as evaluated through our interview process. • Level 3 Engineer / E03 $91,800 - $126,200, • Level 4 Engineer / E04: $106,000 - $145,750, • Senior Engineer / E05: $122,400 - $168,300Pay Range$91,800—$168,300 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionAmerica is critically deficient in production of defensive munitions- we currently produce shipborne interceptors in the few hundreds per year while our adversaries are producing offensive threats in the tens of thousands per year. Furientis was started to help solve this problem- introducing a new class of cost-effective, high production rate, interceptor missiles. We're seeking motivated individuals who internalize this problem and are eager to apply their past experience in similar industries (aerospace, defense, automotive/racing, robotics) and out of the box thinking to solve this problem for the US and its allies.About the Team The Seeker Team builds the eyes and the targeting logic of our weapon system: a low-cost, mass-producible, multimodal missile seeker that leans on commercial supply chains where they outperform the defense legacy, with supply-chain security engineered in from day one. On a modern missile, the seeker is 40 to 60% of unit cost and often drives overly long delivery cycles; accordingly, the seeker team is at the tip of the spear for delivering value to our customers and to the taxpayer. Seeker design has exactly two real constraints: physics and mission. Supply chain, vendor lead time, qualification cost, "the way it's always been done": none of that stops us. We are a small, deeply technical team that drives capability through ingenuity and bias for action and ships hardware that flies. This is a wear-many-hats environment where you must be comfortable "building the airplane in flight" and stepping well outside your comfort zone; a narrowly scoped role with clean handoffs is not what this team offers. This is an AI-native team. Through fluent use of cutting-edge agentic coding tools, one engineer here consistently out-delivers a much larger conventional team. You will have opinions about where these tools help and where they do not, provide governance input, and build AI into your workflow from day one. About the Role You will execute the design, layout, bring-up, and qualification of the boards and SoMs that make our seeker run: FPA and image-sensor interface, GPU SoC / SoM carrier, high-speed digital and low-noise analog signal chains, shared-memory data plane between sensor and compute, power architecture from missile bus to detector bias rails, and the low-level firmware that brings it all up. This is a hands-on role for an engineer who can take a design from blank schematic to first-light bring-up to a low-latency CUDA pipeline running on an SoM in days, not months, and who thinks about manufacturability and second-source risk before the first prototype is built. What You'll Do • Develop and bring up mixed-signal boards centered on a GPU SoC or SoM (NVIDIA Jetson/Orin, Qualcomm, NXP, or similar): high-speed image-sensor interface, low-noise analog chain, power conversion, and missile-bus IO., • Architect and implement the high-speed image-sensor interface (LVDS, MIPI CSI-2, CameraLink, SLVS-EC, SerDes) end-to-end from sensor pinout to SoM ingest, including timing, signal integrity, and zero-copy DMA into GPU-accessible memory., • Stand up the on-board compute path on GPU SoCs: CUDA pipelines, TensorRT inference, and shared-memory/zero-copy data movement from capture to inference, hitting hard latency and jitter budgets., • Write low-level firmware, drivers, and bring-up tooling in Rust and Python: device-tree, sensor configuration, board diagnostics, automated bench tests, and the on-the-wire serialization layer (protobufs or equivalent)., • Execute schematic capture and PCB layout (Altium, Cadence, or KiCad), or partner with a layout designer when complexity warrants. Carrier-board design for the chosen SoM as required., • Drive the power chain from missile bus to FPA bias rails (sequencing, low-noise LDOs, switching regulation, transient response, isolation), with component selection that bakes in cost, lead-time, second-source, and rad-tolerance from day one., • Bring up boards on the bench (scope, logic analyzer, BERT, thermal imaging, rework iron) and chase low-latency, jitter-sensitive timing bugs to their physical root., • Execute EMI/EMC qualification per MIL-STD-461 and environmental qualification per MIL-STD-810; partner with mechanical on conformal coating, staking, thermal interfaces, and survivability., • Bake DFM and DFT in from the start: CM engagement, ICT/AOI, board-level test fixtures, and a clear path to volume.Skills We're Hiring For, • B.S. in Electrical Engineering, Computer Engineering, or related; M.S. preferred., • 4 to 6 years of mixed-signal hardware and firmware bring-up experience, with responsibility for at least one board (ideally with an SoM carrier) from schematic through bench validation., • Strong fundamentals across high-speed digital (signal integrity, controlled impedance), low-noise analog, and power conversion., • Hands-on with high-speed image-sensor interfaces (LVDS, MIPI CSI-2, CameraLink, SLVS-EC, or SerDes) end-to-end from sensor to compute. Non-negotiable., • Production CUDA experience: shipped real CUDA code, not dabbled. Reasons about kernels, memory layout, occupancy, streams, and host-device transfer cost; at the level needed to debug a stalled pipeline on an Orin., • SoMs and shared-memory ecosystems (Jetson family or equivalent): zero-copy and unified-memory patterns, getting sensor data into GPU-accessible memory without copies you can't afford., • Experience or strong willingness to work in Rust and Python for firmware, drivers, bring-up tooling, and low-latency host-side code., • Hands-on TensorRT: model conversion, calibration, plugin integration, and deployment into a real on-board inference pipeline., • Low-latency, jitter-sensitive applications: deterministic timing budgets, real-time scheduling, interrupt and DMA latency analysis., • Schematic and PCB tooling proficiency (Altium, Cadence, or KiCad) with practical layout judgment. Comfortable on the bench (scope, logic analyzer, soldering iron, rework)., • AI-native working style: daily use of agentic coding tools (Claude Code, Codex, OpenCode, Kilo, or similar) for firmware, test-bench scripts, component selection, and schematic/layout review.Bonus Points For, • NVIDIA PVA, Qualcomm Hexagon, OpenCL, or other heterogeneous-compute runtimes beyond CUDA., • Direct experience interfacing to IR detectors, focal-plane arrays, or ROICs (cooled or uncooled)., • Carrier-board design experience for a commercial SoM., • High-volume or DFM experience: walked a board through CM bring-up at production rate., • MIL-STD-461, MIL-STD-810, MIL-STD-1553, RS-422, or Ethernet-over-physical-layer qualification experience., • Direct missile, munition, ISR, or aerospace-qualified hardware program experience. Eligibility & Logistics Location: On-site at our Los Angeles, CA HQ; remote work is not available. Monthly weekend travel for test events and supplier engagements. Clearance: A clearance is not required for this position. Must be a U.S. Person. Equal Opportunity & Export Compliance Furientis is an equal-opportunity employer. To comply with U.S. export control laws, employment is contingent on eligibility to access export-controlled information. AI assists in reviewing applications. Humans make final hiring decisions. Contact us with questions.

Job Description Claros is a power management solutions company that is innovating at the intersection of power and compute to make AI more sustainable and widely available. By driving down the cost and complexity of power delivery and leveraging innovative hardware and software, the company seeks to decrease energy consumption, optimize power delivery, increase compute performance, and maximize the efficiency of AI operations. Staff/Principal ATE Test Engineer About The Team We are open-minded, fast paced, problem solvers that value open dialogue and candor. Our passion is to challenge the status-quo and we embrace transformational thinking. Our response is never "no, but…." instead "yes, if….". We are mindful of our personal and organizational blinders and try to build an environment where our team members are At Their Best. Location: Minimum of 3 days a week in the office in Torrance, CA. About The Role We are seeking a highly experienced Principal ATE Test Engineer to lead test development and production test strategy for a high-performance integrated voltage regulator (IVR) semiconductor product line targeting advanced AI and HPC power delivery applications. This role is focused primarily on semiconductor test engineering, spanning DFT collaboration, characterization support, wafer probe, final test, hardware development, production ramp, and manufacturing optimization. The ideal candidate combines deep technical expertise in mixed-signal and power semiconductor test with strong leadership across silicon bring-up and high-volume manufacturing environments. The candidate is expected to operate as a senior technical leader capable of driving test strategy independently across internal teams and external manufacturing partners. What You Will Do • Define overall manufacturing test strategy for IVR silicon across wafer probe and package final test, • Develop production screening methodologies for:, • Analog and mixed-signal circuits, • Integrated ADCs and telemetry, • Digital control and state machines, • PMBus/I2C interfaces, • OTP/eFuse programming, • Protection and fault-management circuitry, • Power-stage functionality and efficiency, • Partner with Design and DFT teams to ensure robust testability and manufacturability, • Lead development of wafer sort and final test solutions on production ATE platforms, including:, • ATE Test programs, • Probe/load board hardware, • Calibration methodologies, • Thermal management approaches, • Multisite test architectures, • Drive aggressive test time reduction while maintaining production quality targets., • Support transition from engineering characterization flows into scalable high-volume production test, • Support first-silicon bring-up activities and debug of manufacturing test flows, • Support trim development, calibration algorithms, and production limit setting, • Debug silicon, hardware, and software issues observed during characterization and manufacturing ramp What You Bring • 10+ years in the semiconductor industry, with a proven track record developing manufacturing test solutions for high-volume semiconductor products., • BS/MS in Electrical Engineering or related field, • Experience with mixed-signal and/or power management IC MFG test development, • Strong understanding of:, • Wafer probe and final test flows, • Mixed-signal ATE methodologies, • Yield analysis and characterization, • Test hardware development, • Test time optimization, • OSAT manufacturing flows, • Experience with high-volume semiconductor manufacturing environments, • Strong debugging capability across silicon, hardware, software, and manufacturing domains, • Experience working with foundries and outsourced manufacturing/test partners, • Familiarity with PMBus, I2C, telemetry, and power management architectures, • Experience with Advantest, Teradyne, or Cohu mixed-signal/power ATE platforms, • Understanding of DFT methodologies for mixed-signal SoCs Salary Range: $160k-$200k. This represents the typical salary range for this position based on experience, skills, and other factors. Our Red Cell Partners Benefits: • Career track opportunity with potential for rapid advancement with strong performance as the firm grows, • 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family., • Paid maternity and paternity for 14 weeks at employees' normal pay., • Unlimited PTO, with management approval., • Opportunities for professional development and continued learning., • Optional 401K, FSA, and equity incentives available. Applicant Data Disclosure By submitting an application, you acknowledge that Red Cell Partners, LLC ("Red Cell") uses third-party service providers to facilitate its recruitment and hiring processes. These providers include applicant tracking systems, candidate verification platforms, and fraud detection tools (collectively, "Hiring Platforms"). Your application materials, including your résumé, cover letter, work samples, responses to application questions, and any other information you submit, may be transmitted to and processed by these Hiring Platforms for the following purposes: • Managing and administering your application throughout the hiring process;, • Verifying the accuracy and authenticity of application materials, including by cross-referencing information you provide against publicly available sources and proprietary databases;, • Identifying indicators of potentially fraudulent, fabricated, or materially misleading application content, including but not limited to discrepancies between submitted materials and publicly available professional profiles, geographic anomalies, and fabricated work histories. Applications that are flagged through this process as containing indicators of fraud or material misrepresentation may be declined from further consideration. If you have questions about the status of your application or the evaluation process, please contact talent@redcellpartners.com. Red Cell requires its Hiring Platform providers to process your information solely for the purposes described above and in accordance with applicable law. Your information will be retained only for as long as necessary to fulfill these purposes and any applicable legal obligations, after which it will be deleted in accordance with Red Cell's data retention policies. For more information about how your data is used, please refer to our Privacy Policy and Applicant Privacy Notice.