Information Technology jobs in Los Angeles, CaliforniaCreate job alerts

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Systems Engineering Job Code: 35582 Job Location: On-site at our Canoga Park, CA facility Job Schedule: 9/80 Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: The Missile Solutions segment of L3Harris is a leader in the design, manufacture, and deployment of advanced propulsion and energetics systems, including those for rocket motors. Our customers include the U.S. Department of Defense, NASA, and other notable agencies and companies domestically and internationally. We are currently seeking a Specialist Systems Engineer to join our team, focused on specifying requirements for propulsion systems. Candidates interested in applying for this position should have a background in systems engineering and an understanding of Model Based Systems Engineering (MBSE). This role demands meticulous attention to detail and the ability to manage projects under general supervision. Key Responsibilities: • Specify Requirements: Develop comprehensive system requirements for the specification, design, and verification of propulsion systems, including applicable industry standards., • Integration: Coordinate with cross-functional teams to ensure requirements are met during the design and verification phases., • Risk Management: Identify potential risks and develop mitigation strategies to ensure successful project completion., • Communication: Present findings and updates in written reports and oral presentations to stakeholders at various levels. Essential Job Functions: • Requirement Development (60%): Develops systems, subsystem, and component requirements for rocket propulsion systems’ product development. Responsible for derivation, allocation, and documentation of requirements in requirements databases and specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification. These activities will be performed utilizing model-based systems engineering tools., • Functional Analysis (15%): Performs functional analysis and coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives., • Risk Coordination (15%): Coordinates project risk and opportunity assessment and management and prepares and reports results on mitigation plans. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date., • Communication (10%): Communicates results in oral presentations and written communication. Represents the organization in meetings/teleconferences to resolve important questions and to plan and coordinate work., • Travel: Requires up to 10% travel time., • Clearance: Ability to obtain a US LEVEL security clearance Basic Qualifications • Bachelor’s Degree in Mechanical Engineering, Aerospace Engineering, or a related field and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Qualifications: • At least 4 years of relevant industry experience in systems engineering, preferably in the aerospace or defense sectors. Specifically, Systems Engineering (requirements management, risk management, product development cycle) disciplines and liquid rocket propulsion strongly desired., • Advanced degree in a relevant field is preferred., • Experience with tools like IBM DOORs and Model-Based Systems Engineering methodologies., • US LEVEL Secret Security Clearance. Work Environment and Physical Requirements: • Office Work: Ability to work in a standard office setting and use office equipment, including computers., • Physical Activity: Ability to lift/carry/push/pull up to 25 pounds occasionally. Infrequent walking, climbing, stooping, crouching, and bending required., • Communication: Effective verbal and written communication skills for interactions with teams and stakeholders., • Safety Equipment: May require the use of personal protective equipment such as safety glasses and safety shoes. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $92,000 - $171,500. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, and Vermont is $80,500 - $149,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-HJ1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Program Manager Job Code: 34014 Job Location: Anaheim, CA. Schedule: 9/80- Employees work 9 out of every 14 days – totaling 80 hours worked, and have every other Friday off Job Description: The Lead, Program Management function provides support to Program and Portfolio managers with program tasks or managing follow on production programs and new development programs. As such, this program management role provides direction and Integrated Program Teams for the company. This role is also responsible for accomplishing program objectives by supporting the planning and assisting with the evaluation of program activities such as schedule review, production hardware tracking, and leading weekly IPT meetings. This role will require interactions with all core team members including engineering, quality, supply chain management, operations, program finance, and contracts. The Senior Specialist Program Management function is responsible for program budgets, cost reporting, coordination of resources, and customer interface under minimal supervision. In summary, this position is also expected to take a lead role in the execution of specific programs as defined by their manager. We are seeking a highly motivated, solution-oriented, and results driven individual. Essential Functions: • Directs all phases of programs assigned from inception through completion., • Drives program execution in order to achieve key business and financial objectives for orders, revenue recognition, operating income, and free cash flow for new, continuing, or current programs., • Participates in the negotiation of contract and contract changes., • Coordinates the preparation of proposals, business plans, performance Statement of Work (SOW) and specifications, operating budgets and financial terms/conditions of contract., • Acts as primary customer contact for program activities, leading program review sessions with customer to discuss cost, schedule, and technical performance., • Expands the product line with the customer. Establishes milestones and monitors adherence to master plans and schedules, identifies program problems and identifies and implements solutions, such as allocating resources or changing contractual specifications., • Directs the work of employees assigned to the program from technical, manufacturing and administrative areas., • Bachelor’s Degree and minimum 9 years of prior relevant experience. Graduate Degree and minimum 7 years of relevant experience. In lieu of a degree, minimum of 13 years of prior related experience and/or strong directly relevant sustainment experience of proven performance with DOD or USN customer, • Production/Manufacturing program management experience, • Program Cost management and cost account management experience, • Manufacturing operations experience, • EVMS experience, • Highly motivated, solution-oriented, and results driven individual, • Proven project/program management performance with DOD or USN customer, • Microsoft Office – Proficiency, • Proven Ability to lead and motivate diverse teams, • Set clear goals, • Drive results in a dynamic environment, • Demonstrates aptitude in the following areas, • General knowledge of FAR/DFAR requirements, • Government DPAS rated contracts, • Project management, production projects, • Program Scheduling In compliance with pay transparency requirements, the salary range for this role in Colorado State, Hawaii, Illinois, Maryland, Minnesota, Vermont and New York State is $110K-$205K. For California, New Jersey, Seattle, Washington D.C., Maryland Greater Washington D.C. area, the city of Denver, Washington State and New York City, the salary range for this role is $127-$236K. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-LT1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Software Engineering Job Code: 34734 Job Location: Anaheim, CA Schedule: 9/80 JOB DESCRIPTION: L3Harris Maritime Power & Energy Solutions (MPES) has an opening in the software engineering organization within its Maritime Systems sector site located in Anaheim, CA. Under general direction of the Management of Software Engineering, this position develops and applies advanced software engineering methods in the investigation and solution of complex and advanced technical problems power system architectures and power conversion equipment. The Senior Software Engineer shall lead software engineer team to support for all stages of product development from design through implementation and system integration under minimal supervision. ESSENTIAL DUTIES • Interpret customer specification to define requirements for software design., • Capture and document existing software product to meet qualification standards at highly regulated and safety critical government contracts., • Provide software technical leadership for the software developer team members., • Reviews project progress and helps in earned value reporting. Recommends corrections in technical approach to maximize efficiency of engineering resources., • Proactively seek performance improvement/enhancement for the SW team with DevSecOp assisted automation and streamlining., • Support new programs from conceptual design, through detail design to completion., • Bachelor of Science degree in Computer Engineering, Computer Science, Electrical Engineering, or equivalent from a four-year college or university; and minimum 6 years of experience in design and analysis of systems software for power conversion equipment. Master of Science or advanced degree preferred and a minimum of 4 years of prior related experience. Or in lieu of a degree, minimum of 10 years of prior related experience., • Ability to obtain and maintain a secret/security clearance., • Expertise in embedded real-time systems software design., • Experienced in object and service-based software architectures, a plus., • Experienced in embedded C and C++ programming., • Expertise with communication protocols, such as RS-232, RS-485, and Ethernet., • Experience in development and releasing software products meeting highly regulated and safety critical standards, medical or military grade software product, preferred., • Design familiarity with control systems and power conversion concepts is highly preferred., • Knowledge of power electronics and analog circuits, a plus., • Must be able to work as a key member of the design team with Power Design Engineers, Digital and Analog Engineers, System Engineers, Control System Engineers and Mechanical Engineers, • Knowledge of Python or C-Sharp is beneficial. In compliance with pay transparency requirements, the salary range for this role for California is $122,500- 177,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RTC1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist Software Engineer Job Code: 35496 Job Location: Anaheim Ca Schedule: 9/80 Summary: Under general direction of the Management of Software Engineering, this position develops and applies advanced software engineering methods in the investigation and solution of complex and advanced technical problems power system architectures and power conversion equipment. The Specialist Software Engineer shall lead a small software engineer team to support for all stages of product development from design through implementation and system integration under minimal supervision. Essential Duties: • Development and integration of software projects for existing and new products., • Interpret customer specifications to define requirements for software design., • Provide software technical leadership for the software developer team members., • Perform requirement analysis and software coverage analysis for software code base., • Compose software use case and review test procedures for validation and verification of software development., • Capture and document existing software products to meet qualification standards at highly regulated and safety critical government contracts., • Ability to work simultaneously on a variety of projects., • Reviews project progress and help with earned value reporting. Recommend corrections in technical approach to maximize efficiency of engineering resources., • Responsible to lead and operate Agile sprint/Kanban team, sprint planning, Jira ticket-based workflow management, and tracking toward team deliverable objectives., • Proactively seek performance improvement/enhancement for the SW team with DevSecOp assisted automation and streamlining., • Support activity effort estimation in development of software bid and proposals., • Support new programs from conceptual design, through detail design to completion., • Provides expert guidance with a variety of software engineering concepts, practices, and procedures, • Coordinate directions from Project and/or System Engineering Department Manager. Qualifications: • Bachelor of Science degree in Computer Engineering, Computer Science, Electrical Engineering, or equivalent from a four-year college or university; and minimum 6 years of experience in design and analysis of systems software for power conversion equipment., • Or a Master of Science or advanced degree preferred and a minimum of 4 years of prior related experience., • Or in lieu of a degree, minimum of 10 years of prior related experience., • Ability to obtain and maintain a secret/security clearance., • Expertise in embedded real-time systems software design., • Experienced in object and service-based software architectures, a plus., • Experienced in embedded C and C++ programming., • Expertise with communication protocols, such as RS-232, RS-485, and Ethernet., • Experience in development and releasing software products meeting highly regulated and safety critical standards, medical or military grade software product, preferred., • Design familiarity with control systems and power conversion concepts is highly preferred., • Knowledge of power electronics and analog circuits, a plus., • Must be able to work as a key member of the design team with Power Design Engineers, Digital and Analog Engineers, System Engineers, Control System Engineers and Mechanical Engineers #LI-BR2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Operations Leadership Rotation Program Job Code: 34971 Job Location: Huntsville, AL or Camden, AR or Orange, VA or Orlando, FL, Cincinnati, OH or Canoga Park, CA Job Schedule: Varies by location Job Description: The Operations Leadership Rotation Program (OLRP) is a two-year learning opportunity for high performing individuals who aspire to become future Operations leaders. The OLRP provides a broad, cross-functional, hands on learning experience which consists of four 6-month assignments that will stretch knowledge and capabilities across multiple Missile Solutions sites in the following Operations Centers of Excellence: Manufacturing Operations, Manufacturing Engineering, Quality & Mission Assurance, Scheduling & Material Planning and Supply Chain Material Management. The OLRP provides a great opportunity to gain a greater understanding of our business and develop leadership skills to prepare for future leadership roles. Essential Functions: * Gain knowledge of operations functional areas to gain a greater understanding of Operations in the Missile Solutions Segment. * Engage as a team member and contribute to each Operations Center of Execllence (COE) rotation. * Take on new/special assignments to help improve how we do business. * Lead strategic initiatives as opportunities arise. * Develop and demonstrate individual leadership skills. * Aspires to become an Operations Leader (Mfg Ops, Mfg Eng, QMA, SMP & SCMM). * Travel Requirements: Must be willing accept temporary assignments in alternate locations every six months (Canoga Park, CA, Olrando, FL, Camden, AR, Huntsville, AL, Cincinnati, OH & Orange, VA). * Ability to obtain US Secruity Clearence. Qualifications: * Bachelor's with 6 years prior experience in operations, Graduate Degree with 4 years prior experience in operations. In lieu of a degree, minimum of 10 years of prior related experience in operations. Preferred Additional Skills: * Master’s Degree preferred. * Learning Agility—ability to ramp-up quickly, generalize knowledge and apply learning in new settings. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $79,000.00-$147,000.00. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio and Vermont is $69,500.00-$129,500.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-AT4 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

Come and join our talented Creative Team at Disney & Pixar Games. This unique position requires a highly creative and motivated individual to partner with the best game developers from across the globe to build the next generation of Disney & Pixar Games. The Artist, Creative Development will be responsible for providing visual guidance and brand feedback, as well as concept and design support as needed to our external development teams to elevate the visual quality of our diverse portfolio of mobile, console, and PC games. This role draws upon not only your skills as an artist and game developer, but also your knowledge of gaming trends and as a passionate Disney enthusiast who can creatively support our external partners. You will be responsible for reviewing visual development submissions, providing feedback to external game development partners, and guiding visual design through the lens of our characters and worlds, to ensure that each game is a compelling, appealing, and authentic Disney & Pixar experience. This is a full-time on-site position, and candidates must be willing to relocate to Southern California. You will report to the Lead Artist, Creative Development You must also submit a digital portfolio. Please share or disable any passwords for efficient review of portfolios. * Supports Visual Design on small to medium scale projects as an expert on the worlds, stories, and characters of Disney & Pixar. * With oversight from the Lead Creative, drives the visual quality & brand integrity of the projects to which they are assigned. * Collaborate with external game partners on visual designs throughout the product lifecycle (from ideation to release to live operations) on assigned projects. * Provides visual feedback, guidance, resources and direction to help deliver quality and brand authenticity across assigned games in the form of draw-overs, painter-overs, and written notes. * Problem-solves brand/visual design challenges, always working towards visual improvement of our products, characters, and worlds. * Communicates and collaborates directly with our Product Development, our Brand Relations teams. * Contribute to special internal projects beyond visual development of games, including the creation of team branding, presentation decks and unique executions. Brand & Franchise Guidance: * Collaborates with partners to create gameplay experiences that authentically represent our brands and engage gamers and fans alike. * Creatively and mindfully work within existing and upcoming Disney and Pixar IP guidelines to provide guidance to our partners that ensures that the game art direction and visuals within our products are being designed and executed mindfully, authentically, and respectfully. * 3+ years Game Development related experience on a mobile, console or pc. * Has shipped mobile, console, and/or PC games with live operations components. * Experience working on content based on intellectual properties. * Ability to create compelling artwork and illustrations. With a strong portfolio showcasing relevant examples. * Passionate Disney & Pixar enthusiast, a must. * An avid fan of games and gaming. Stays up to date on new games and is a gameplayer. Clear understanding of various gaming platforms (Mobile, Console, and PC) and various game types and genres. * Strong 2D art skills with the ability to draw and illustrate Disney-like characters and worlds. * Solid skills in one of the following additional art backgrounds: character design, 2D art, 2D animation, 3D art, environmental design, and UI Design. * Comprehensive artistic knowledge and ability to execute various art styles. * Strong written and verbal communication skills with the ability to present feedback and ideas in a clear and concise manner. * Creatively oversee and guide projects from beginning to end with oversight from a direct manager, keeping them updated on product progress. * Self-starter, reliable, and passionate about their work; committed to their discipline and its challenges. * Proficient in Adobe Creative Suite including Adobe Photoshop (Illustrator is a plus) * Experience with a 3D package a plus. * Experience with graphic art including UI, Logo Design, presentation deck graphics and branding elements. * Experience working in Game Development production and/or concept pre-production phases. Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ___. #DCPJobs #DXMedia #Gamesjobs The hiring range for this position in Glendale, CA is $79,400 to $106,400 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Quality Process Engineer (Zeiss Calypso CMM Programmer) Job Code: 35388 Job Location: Onsite at our Canoga Park CA facility Job Schedule: 9/80 Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: The Missile Solutions segment of L3Harris, is seeking a Zeiss Calypso Programmer to join our Precision Measurement Room (PMR) team at our Canoga Park, CA facility. This role will be responsible for planning, prioritizing and developing CMM programs utilizing Calypso based on operational needs to ensure accurate measurements of all hardware on the shop floor. The ideal candidate will have an understanding of ASME Y14.5, Zeiss Calypso software, CMM programming, measurement uncertainty/capability and a background in multiple precision measurement techniques. The candidate will need to use strong GD&T skills to understand complex engineering drawings for a low volume and high complexity manufacturing environment. Essential Functions: • Programming and Coordination: Develop, test, and implement CMM programs using Zeiss Calypso software to measure complex components and assemblies., • Project Management: Communicate with cross functional teams to prioritize and manage deadlines for precision measurement related due dates and tasks, • Process Development: Support the CMM programming process to improve efficiency, accuracy, and consistency in measurements., • Technical Support: Assist inspectors and other individuals at the company with inspection techniques, providing guidance on the advantages and disadvantages of each technique., • Data Analysis: Analyze measurement data and generate detailed reports, highlighting any discrepancies and recommending corrective actions., • Documentation: Maintain accurate records of measurement data and inspection reports., • Collaboration: Work closely with engineering, manufacturing, and quality assurance teams to address measurement-related issues and improve overall product quality., • Training and Support: Provide training and technical support to other team members on the use of Zeiss Calypso software and CMM equipment., • Continuous Improvement: Identify opportunities for process improvements and implement best practices in measurement techniques and CMM programming. Basic Qualifications: • Bachelor’s Degree and minimum 4 years of prior relevant quality experience. Graduate Degree and a minimum of 2 years of prior related quality experience. In lieu of a degree, minimum of 8 years of prior related quality experience. Preferred Additional Skills: • Technical Skills:, • 3+ years hands-on experience using Zeiss Calypso software, • 3+ years with ASME Y14.5 and interpreting/creating engineerng drawings and specifications, • Analytical Skills: Excellent problem-solving skills with the ability to analyze complex measurement data and identify root causes of discrepancies., • Communication Skills: Strong verbal and written communication skills, with the ability to generate clear and concise reports., • Attention to Detail: High level of attention to detail and accuracy in measurement and reporting., • Self-Starter: Ability to hit the ground running and make an immediate impact with minimal supervision., • Certifications:, • CMM Certification on Zeiss Calypso, • Other technologies/inspection instrumentation, • Structured Light Systems: Experience using structured light machines and performing analysis preferably using the Zeiss Inspection Software., • Optical Inspection CMM: Experience with a Zeiss O-Inspect (Optical Inspection) CMM., • Lean Manufacturing: Knowledge of Lean Manufacturing principles and practices., • Project Management: Experience in managing measurement projects and coordinating with cross-functional teams. In compliance with pay transparency requirements, the salary range for this role is $84,000 - $156,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-HJ1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

About the Role & Team Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe. Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us. Ride Development Engineering Design Assurance is an all-encompassing role that provides technical oversight and guidance in support of Ride project teams. As Ride engineering experts, they lead the way when it comes to process, standardization, and overall design compliance. Design Assurance Engineers work alongside our project teams to provide experience, knowledge, and expertise to help advance our projects. This role will work with the Executive Ride Development Engineering. This is a full-time role. What You Will Do: * Serve as Mechanical Subject Matter Expert (SME) in the Ride Engineering design review process to ensure that appropriate engineering/design standards, methods, analyses, and judgment are applied so the engineered products meet the design intent and the business imperatives of safety, reliability, and efficiency. * Review designs related to Ride Engineering products and provide feedback to project teams and functional management regarding the acceptability of those designs. * Interpret and develop standards and codes that will be utilized by the Ride Engineering organization. * Advocate global consistency of solutions for similar problems, and compliance with Disney and external standards. * Partner with Disney leadership and project teams to improve process and standards for the benefit of future engineering efforts. * Contribute to mentoring and talent development Required Qualifications & Skills * Advanced engineering knowledge (e.g., statics, dynamics, kinematics, stress/strain/fatigue). * Advanced engineering expertise (e.g., machine design, weldments, power train, materials). * Proficiency with engineering tools (e.g., Solid Modeling, Building Information Modeling (BIM), 2D Modeling, FEA, Engineering calculation software e.g. Mathcad, Engineering programming and modeling software e.g. MatLab). * Superior design sensibilities and creative problem solving. * Excellent written & verbal communication skills. * Ability to work collaboratively within a large and diverse team environment. Preferred Qualifications & Skills * Previous Disney or entertainment experience, with advanced knowledge of the industry. * Extensive experience with life safety design/requirements. * Experience with prototype, development, and/or innovative products. Education • Bachelor's Degree (B.S. or B.A.) in Engineering from an accredited college or university required. (Mechanical Engineering preferred) Additional Information: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ___. #DXMedia The hiring range/pay rate for Principal Ride Development Engineer is $139,200.00-$186,600.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

MANTECH is seeking a motivated, career and customer-oriented Information Technology Assurance Specialist I to join our team in El Segundo, CA. The Information Technology Assurance Specialist's primary function is to work within Special Access Programs (SAPs) supporting SSC and AFSPC Operational Units. The position will provide “day-to-day” support for Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities. Responsibilities include but are not limited to: * Establish complex operational software configuration controls and system interfaces for computer system(s) assigned. * Maintain file servers, Firewalls, network access, Security Monitoring Systems and system documentation as required. * Analyze and troubleshoot system anomalies to ensure optimum equipment performance. * Prepare system for operational use and support operational tests. * Review, prepare, and update AIS accreditation packages, notify customer when changes occur that might affect AIS accreditation/certification, perform AIS self-inspections, identify AIS vulnerabilities and implement countermeasures, and ensure AIS and network nodes are operated, maintained, and disposed of in accordance with security policies and practices. * Provide security coordination and review of all system test plans, guest networks Client Support, Help Desk & troubleshooting, and Personal-Issue Laptop Support. * Perform VTC System Administration, Scheduling, & Configuration, Account Creations, changes, & deletions, Hardware/Software System Configuration, upgrades and modifications, Media Control & Accountability, and COMSEC account/equipment management. Minimum Qualifications: * Bachelor’s degree in a related field or 4 additional years of equivalent experience will be considered in lieu of degree. * 2+ years of total experience working with Information Technology Assurance. * 2+ years of experience working in a SCI environment. * Must have CompTIA Sec + certificate as outlined in DoD Directive 8570.01-M for Information Assurance Technician Level 2 within 6 months of the date of hire. * Must complete training on Joint Security Implementation Guidance (JSIG) and Risk Management Framework (RMF) Information Security Continuous Monitoring (ISCM) (if supported organization requires development of AIS accreditation packages). Preferred Qualifications: * 1+ years of SAP related experience highly desired. * Working knowledge of Local Area Network (LAN) and Wide Area Network (WAN) technologies and data backup technologies to include communication security (COMSEC) integration. * Working knowledge of JAFAN 6/0, DCID/JAFAN 6/3, DCID/JAFAN 6/9, and Joint DODIIS/Cryptologic SCI Information Systems Security Standards, Common Criteria, and System Security Policy as they relate to C&A for Legacy systems. * Working knowledge and current relevant experience with PL1 & PL2 systems; experience with PL3 & PL4 cross domain solutions desired. * Must have the ability to work in a dynamic environment and effectively interact with numerous DOD, military/civilian personnel and industry partners. * Working knowledge of Microsoft Office (Word, PowerPoint, and Excel). Clearance Requirements: * Current Top-Secret Clearance with SCI Eligibility. * Eligibility for access to Special Access Program Information. * Willingness to submit to a polygraph. Physical Requirements: * Must be able to remain in a stationary position 50%. * Needs to occasionally move about inside the office to access file cabinets, office machinery, etc. * Constantly operates a computer and other office productivity machinery, such as a calculator, machine and computer printer. * Frequently communicates with co-workers, management and customers, which may involve delivering presentations. Must be able to exchange accurate information in these situations.

Ensure industry software engineering best practices and standards are applied and maintained. Basic Qualifications for a Principal Software Engineer (T03). Proven ability to design and code new software, as well as modify existing software to add new features.

Active DoD Secret Clearance with periodic reinvestigation within the last five (5) years and be able to be cleared for a Special Access Program (SAP). No remote/telework arrangement is available for this position. Applicants must have an active US Government DoD Secret security clearance with abilit

Our Engineering and Sciences (E&S) organization pushes the boundaries of innovation, redefines engineering capabilities, and drives advances in various sciences. This position may be filled as a Principal Modeling, Simulation and Analysis Systems Engineer or a Senior Principal Modeling, Simulation,

Engineering experience with a Bachelor of Science in a STEM discipline; 3 years of Engineering experience with Masters; 1 Year with a PhD. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, mar

Job Description Position Title: CNC Programmer Location: Montebello, CA 90640, USA Job Category: Manufacturing Req ID: CNCPR001448 Schedule: Full Time Posted:Nov 4, 2025 Job DetailsDescription Close to You Anywhere in the World Groupe SEB is the global reference for small domestic appliances, cookware and professional coffee with its portfolio of 35 emblematic brands such as Tefal, Seb, Rowenta, Moulinex, Calor, Lagostina, Krups, WMF. Present in 150 countries, we produce in more than 40 industrial sites and sell 11 products per second. We believe in the richness of diversity and aspire to create an inclusive and stimulating work environment where our more than 30,000 employees can grow and give their best. SEB Professional is a subsidiary of Groupe SEB. At SEB Professional North America, we are a leader in the professional coffee machine industry, offering three equipment lines: Schaerer, WMF, and Curtis. Our innovative coffee machines are trusted worldwide and can be found in a variety of settings, including hotels, restaurants, coffee shops, and convenience stores. You've likely enjoyed coffee from our machines at McDonald's, Dunkin', Chick-fil-A, Peet’s, or Tim Hortons. Join us in delivering exceptional coffee experiences worldwide. What We Will Achieve Together: The CNC Programmer is the Subject Matter Expert and works independently, making decisions related to the interpretation from reading blueprints, translating these into the proper set up of mills, lathes, lasers to accurately set the tolerance limits in support of “just in time” delivery of fabrication to production. The CNC Programmer acts as a backup to the Supervisor/Manager covering vacation and sick time and the CNC Programmer trains others in the programming and setup for the application of job runs. Base Salary Range: $30/hr - $38/hr DOE. Key Responsibilities Include: • Collaborates with engineering on building prototypes, • Leads and/or Assists in the design and development of machine tooling, • Proficient in set up and operation of Turrets, Laser, Panel Bender, Safan, • First article inspection, • Adjusts machine settings to operate machinery in accordance with established procedures, • Communicate machine operation or parts defects, • In collaboration with the Fabrication Manager makes decisions on spending needs for the machine shop equipment, • Assists Machine Operators answering questions and solving problems, • Identify tool and die issues and perform repair (sharpening) and replacement of tool & die, • Observes operation of machine and verifies conformance of formed or cut workpiece to specifications, using measuring instruments, such as fixed gauges, calipers, and micrometers, • Sources and obtains quotes on machine shop tooling needs, • Leads and Supports training and preparing bench strength, • Ensures that all IMS Standards are maintained and followed, • Has responsibility for scrap control and reduction, • Review production schedule for turret and laser and maximize sheet metal yield, • Runs simulations for new routings and bill of materials for costing purposes, • Maintain cleanliness of workstations, • Ability to operate electric pallet jack and hand pallet jack Requirements: • Experience: Minimum of 3 years of experience in a role with equivalent experience. Preferably in a fast-paced organization with an international presence. Manufacturing experience is a must., • Education: High School Diploma., • Certification: CNC Programmer from accredited school/program., • Key Skills: CNC Programming, Blueprint Reading, CAD/CAM Software, Machine Tooling, and Safety Standards., • Core Competencies: Problem Solving, Interpersonal Skills, Action Orientation, Detail Orientation, Effective Communication and Collaboration. Overview: • Type of Employment: Full time. Non-Exempt, • Workplace Schedule Type: On-Site (May be required to work weekends), • Position Location: Montebello Why SEB Professional North America? Whether working remotely, in one of our offices, or flexing in between, we offer a number of benefits and perks to support you and your family. Here is a sample of some of our benefits programs: • Medical / Dental / Vision Insurance – Generous Employer Contribution, • 401(K) Retirement Plan, • w/ up to a 9% employer contribution after 1st year of employment., • On Site Gym, • 12 Paid Holidays, • Voluntary Benefits and Discount programs Equal Employment Opportunity (EEO) SEB Professional is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other category protected by federal, state, or local law. SEB Professional does not make employment decisions based on any protected class status. For more information, please see OFCCP Equal Employment. PI487215a23bed-25405-38973212

Job DescriptionCannon Corp Description:You’ll Come for a Job…But You’ll Stay for an Exciting Career!Engineering and Designing Reliable, Responsive, Solutions. SINCE 1976, CANNON has provided creative solutions to clients in the energy industry, water resources, public infrastructure, and commercial and residential development. We work hard. We play hard. We have fun. JOIN CANNON as a CIVIL SENIOR PRINCIPAL ENGINEER in WEST LOS ANGELES. West Los Angeles is known for its many popular recreational opportunities, and our office is conveniently located adjacent to the Expo MetroLink Commuter line. CIVIL SENIOR PRINCIPAL ENGINEER JOB SUMMARY Provides daily supervision, coordination, technical support, and training to engineers and designers. Responsible for project management, budgeting oversight, mentoring, leading, and managing talented staff, preparing engineering reports and analyses, design and preparation of plans, specifications, and cost estimates for a variety of clients and great projects (residential / commercial and mixed use development) for land development projects in the Inland Empire. This position offers a clear path to leadership within the Development Business Unit, with a trajectory toward a Regional Manager role. The ideal candidate will gain hands-on experience in high-impact projects, preparing them for greater responsibilities and strategic decision-making. As a key player in the team, this role provides opportunities to develop leadership skills, drive business growth, and contribute to the long-term success of the organization. Candidates who excel in this position will be well-positioned for future advancement into a senior leadership role. CIVIL SENIOR PRINCIPAL ENGINEER JOB DUTIES • Concurrently manages a variety of civil engineering land development projects., • Establishes and fosters client relations and develops proposals and budgets., • Participates in professional and/or technical organizations., • Uses technical knowledge to design plans for grading, drainage, water quality (SUSMPs, LIDs, WQMPs and /or SWPPPs), utility, street, off-site improvements, sanitary sewers, and water lines and provide construction assistance / support services., • Analyzes and recommends solutions to complex drainage problems., • Communicates effectively with various departments, clients, and agencies., • Mentors, directs, manages, and supervises the design associates on technical matters and procedures and acts as a technical and management resource to staff., • Effectively manages quality assurance and quality control., • Ensures projects are delivered on schedule and within scope and budget., • Manages and coordinates with various jurisdictional agencies to obtain approvals of improvement plans., • Is actively involved in business development and expanding opportunities in the Inland Empire area.Requirements:, • Requires a Bachelor’s degree in Civil engineering from an accredited college., • Requires 15+ years’ experience in civil engineering specifically pertaining to land development projects., • 5+ years demonstrated experience supervising and successfully managing projects within the constraints of scope, schedule, budget, and performance requirements, providing technical oversight for projects and all related project phases and tasks, to include quality assurance reviews., • Participates in Land Development organizations like BIA, HBA, etc. is a plus., • Proven ability to lead teams to success, including past experience directly reviewing and managing employee performance, and mentoring a team of three or more direct reports., • Requires a California P.E. license., • Proven expertise in land development design., • Proven experience in processing improvement plans with jurisdictional agencies in the Inland Empire., • Highly proficient with code principles and able to convey them to others., • Experience with business development and client management., • Experience in hydrologic / hydraulic analyses a plus., • Working knowledge of computer software programs used for civil engineering design (AutoCAD, Civil3D, AES, WSPG, Flowmaster, etc.). Cannon is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, age. Compensation details: 150000-220000 Yearly Salary PI864f6a7225a4-25405-39380306

Description Sign-On Bonus: $750 Compensation: $26 - $32 Per Hour Job Description Intercare Therapy provides evidence-based behavioral therapies that help children overcome challenges related to autism spectrum disorders. Our mission is to optimize the independence and quality of life of our clients and their families. We love what we do, and we are seeking Behavioral Program Managers who share our passion for improving the lives of children and families affected by autism. A Behavioral Health or (ABA) Program Manager serves in the field as the onsite case supervisor and leader, mastering daily case management skills, including developing and overseeing clinical programs, supervising BIs and providing education and training for client caregivers. You must be willing to drive 30 to 60 miles a day, and able to supervise client sessions anytime between 8AM and 6PM on weekdays, and occasionally on weekends. We are proud to be the highest rated established ABA organization on Glassdoor! Check out our rankings and reviews on Glassdoor! Learn more about us on You Tube! Benefits of Working at Intercare: • Flexible work schedule with a focus on work/life balance; Manage your own schedule, • Mileage reimbursement, a company computer and cell phone, • Education tuition reimbursement program (Masters & BCBA)!, • Leadership training and CEUs - we will teach how to become a better leader!, • Medical, Dental, and Vision insurance, • Generous time off policy (vacation, sick time, and holidays), • Company 401k Plan, • Outstanding mentorship and supportive environment for continual learning Required Credentials/Experience:, • Completed Master’s degree in relevant field, • In progress with BCBA preferred, • Strong ABA, Program Management, and clinical skills, • Excellent written and spoken communication, time management skills, and interpersonal skills, • Ability to give and receive constructive feedback with a team player attitude

Description Sign-On Bonus: $750 Compensation: $26 - $32 Per Hour Job Description The Program Manager of School Services conducts Functional Behavioral Assessments (FBAs) and develops function-based BIPs for assigned students identified to demonstrate significant behavioral challenges. The Manager designs, implements, and evaluates the delivery and effectiveness of environmental modifications and instructional protocols as outlined in the BIP and other IEP goals. The Manager collaborates with and trains the student’s educational team on implementation of the BIP and specific protocols and provides direct supervision to and oversight of the assigned Behavior Technician team. In this position, you will be supporting students throughout the territory. Onsite work is typically conducted at school sites from 7:30am to 3:30pm with indirect work conducted in the afternoons after school. Scheduling for this position matches the academic calendar of assigned schools. Intercare Therapy may schedule in-service or training days on non-instructional days. We are proud to be the highest rated established ABA organization on Glassdoor! Check out our rankings and reviews on Glassdoor! Learn more about us on You Tube! Benefits of Working at Intercare: • Monthly Bonuses!, • Flexible work schedule with a focus on work/life balance; Manage your own schedule, • Mileage reimbursement, a company computer and cell phone, • Education tuition reimbursement program (Masters & BCBA)!, • Leadership training and CEUs - we will teach how to become a better leader!, • Medical, Dental, and Vision insurance, • Generous time off policy (vacation, sick time, and holidays), • Company 401k Plan, • Outstanding mentorship and supportive environment for continual learning Required Credentials/Experience:, • Completed Master’s degree in relevant field, • In progress with BCBA preferred, • Strong ABA, Program Management, and clinical skills, • Excellent written and spoken communication, time management skills, and interpersonal skills, • Ability to give and receive constructive feedback with a team player attitude

Description Sign-On Bonus: $750 Compensation: $26 - $32 Per Hour Job Description Intercare Therapy provides evidence-based behavioral therapies that help children overcome challenges related to autism spectrum disorders. Our mission is to optimize the independence and quality of life of our clients and their families. We love what we do, and we are seeking Behavioral Program Managers who share our passion for improving the lives of children and families affected by autism. A Behavioral Health or (ABA) Program Manager serves in the field as the onsite case supervisor and leader, mastering daily case management skills, including developing and overseeing clinical programs, supervising BIs and providing education and training for client caregivers. You must be willing to drive 30 to 60 miles a day, and able to supervise client sessions anytime between 8AM and 6PM on weekdays, and occasionally on weekends. We are proud to be the highest rated established ABA organization on Glassdoor! Check out our rankings and reviews on Glassdoor! Learn more about us on You Tube! Benefits of Working at Intercare: • Flexible work schedule with a focus on work/life balance; Manage your own schedule, • Mileage reimbursement, a company computer and cell phone, • Education tuition reimbursement program (Masters & BCBA)!, • Leadership training and CEUs - we will teach how to become a better leader!, • Medical, Dental, and Vision insurance, • Generous time off policy (vacation, sick time, and holidays), • Company 401k Plan, • Outstanding mentorship and supportive environment for continual learning Required Credentials/Experience:, • Completed Master’s degree in relevant field, • In progress with BCBA preferred, • Strong ABA, Program Management, and clinical skills, • Excellent written and spoken communication, time management skills, and interpersonal skills, • Ability to give and receive constructive feedback with a team player attitude

Description Sign-On Bonus: $750 Compensation: $26 - $32 Per Hour Job Description Intercare Therapy provides evidence-based behavioral therapies that help children overcome challenges related to autism spectrum disorders. Our mission is to optimize the independence and quality of life of our clients and their families. We love what we do, and we are seeking Behavioral Program Managers who share our passion for improving the lives of children and families affected by autism. A Behavioral Health or (ABA) Program Manager serves in the field as the onsite case supervisor and leader, mastering daily case management skills, including developing and overseeing clinical programs, supervising BIs and providing education and training for client caregivers. You must be willing to drive 30 to 60 miles a day, and able to supervise client sessions anytime between 8AM and 6PM on weekdays, and occasionally on weekends. We are proud to be the highest rated established ABA organization on Glassdoor! Check out our rankings and reviews on Glassdoor! Learn more about us on You Tube! Benefits of Working at Intercare: • Flexible work schedule with a focus on work/life balance; Manage your own schedule, • Mileage reimbursement, a company computer and cell phone, • Education tuition reimbursement program (Masters & BCBA)!, • Leadership training and CEUs - we will teach how to become a better leader!, • Medical, Dental, and Vision insurance, • Generous time off policy (vacation, sick time, and holidays), • Company 401k Plan, • Outstanding mentorship and supportive environment for continual learning Required Credentials/Experience:, • Completed Master’s degree in relevant field, • In progress with BCBA preferred, • Strong ABA, Program Management, and clinical skills, • Excellent written and spoken communication, time management skills, and interpersonal skills, • Ability to give and receive constructive feedback with a team player attitude

Description Sign-On Bonus: $750 Compensation: $26 - $32 Per Hour Job Description Intercare Therapy provides evidence-based behavioral therapies that help children overcome challenges related to autism spectrum disorders. Our mission is to optimize the independence and quality of life of our clients and their families. We love what we do, and we are seeking Behavioral Program Managers who share our passion for improving the lives of children and families affected by autism. A Behavioral Health or (ABA) Program Manager serves in the field as the onsite case supervisor and leader, mastering daily case management skills, including developing and overseeing clinical programs, supervising BIs and providing education and training for client caregivers. You must be willing to drive 30 to 60 miles a day, and able to supervise client sessions anytime between 8AM and 6PM on weekdays, and occasionally on weekends. We are proud to be the highest rated established ABA organization on Glassdoor! Check out our rankings and reviews on Glassdoor! Learn more about us on You Tube! Benefits of Working at Intercare: • Flexible work schedule with a focus on work/life balance; Manage your own schedule, • Mileage reimbursement, a company computer and cell phone, • Education tuition reimbursement program (Masters & BCBA)!, • Leadership training and CEUs - we will teach how to become a better leader!, • Medical, Dental, and Vision insurance, • Generous time off policy (vacation, sick time, and holidays), • Company 401k Plan, • Outstanding mentorship and supportive environment for continual learning Required Credentials/Experience:, • Completed Master’s degree in relevant field, • In progress with BCBA preferred, • Strong ABA, Program Management, and clinical skills, • Excellent written and spoken communication, time management skills, and interpersonal skills, • Ability to give and receive constructive feedback with a team player attitude

Description Sign-On Bonus: $750 Compensation: $26 - $32 Per Hour Job Description The Program Manager of School Services conducts Functional Behavioral Assessments (FBAs) and develops function-based BIPs for assigned students identified to demonstrate significant behavioral challenges. The Manager designs, implements, and evaluates the delivery and effectiveness of environmental modifications and instructional protocols as outlined in the BIP and other IEP goals. The Manager collaborates with and trains the student’s educational team on implementation of the BIP and specific protocols and provides direct supervision to and oversight of the assigned Behavior Technician team. In this position, you will be supporting students throughout the territory. Onsite work is typically conducted at school sites from 7:30am to 3:30pm with indirect work conducted in the afternoons after school. Scheduling for this position matches the academic calendar of assigned schools. Intercare Therapy may schedule in-service or training days on non-instructional days. We are proud to be the highest rated established ABA organization on Glassdoor! Check out our rankings and reviews on Glassdoor! Learn more about us on You Tube! Benefits of Working at Intercare: • Monthly Bonuses!, • Flexible work schedule with a focus on work/life balance; Manage your own schedule, • Mileage reimbursement, a company computer and cell phone, • Education tuition reimbursement program (Masters & BCBA)!, • Leadership training and CEUs - we will teach how to become a better leader!, • Medical, Dental, and Vision insurance, • Generous time off policy (vacation, sick time, and holidays), • Company 401k Plan, • Outstanding mentorship and supportive environment for continual learning Required Credentials/Experience:, • Completed Master’s degree in relevant field, • In progress with BCBA preferred, • Strong ABA, Program Management, and clinical skills, • Excellent written and spoken communication, time management skills, and interpersonal skills, • Ability to give and receive constructive feedback with a team player attitude

Description Sign-On Bonus: $750 Compensation: $26 - $32 Per Hour Job Description The Program Manager of School Services conducts Functional Behavioral Assessments (FBAs) and develops function-based BIPs for assigned students identified to demonstrate significant behavioral challenges. The Manager designs, implements, and evaluates the delivery and effectiveness of environmental modifications and instructional protocols as outlined in the BIP and other IEP goals. The Manager collaborates with and trains the student’s educational team on implementation of the BIP and specific protocols and provides direct supervision to and oversight of the assigned Behavior Technician team. In this position, you will be supporting students throughout the territory. Onsite work is typically conducted at school sites from 7:30am to 3:30pm with indirect work conducted in the afternoons after school. Scheduling for this position matches the academic calendar of assigned schools. Intercare Therapy may schedule in-service or training days on non-instructional days. We are proud to be the highest rated established ABA organization on Glassdoor! Check out our rankings and reviews on Glassdoor! Learn more about us on You Tube! Benefits of Working at Intercare: • Monthly Bonuses!, • Flexible work schedule with a focus on work/life balance; Manage your own schedule, • Mileage reimbursement, a company computer and cell phone, • Education tuition reimbursement program (Masters & BCBA)!, • Leadership training and CEUs - we will teach how to become a better leader!, • Medical, Dental, and Vision insurance, • Generous time off policy (vacation, sick time, and holidays), • Company 401k Plan, • Outstanding mentorship and supportive environment for continual learning Education, Experience, Certification Requirements:, • Master’s degree in education, psychology, counseling, behavior analysis, behavior science, human development, social work, rehabilitation, or related field, required, • Strong ABA, Program Management, and clinical skills, • Enrollment in and/or completion of behavior-analytic coursework, preferred, • 2+ years of experience implementing behavior treatment under the supervision of a BCBA, preferred, • 2+ years of experience with students demonstrating significant behavioral challenges, preferred

Description \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n Play a key role in supporting exceptional patient care\nwithin a nationally recognized health system. At UCLA Health Pharmacy, you’ll\ncontribute to meaningful work that strengthens the quality and safety of our\nservices. \n\n \n\n Under the guidance of the Senior Clinical Applications\nPharmacist, as a Clinical Systems Administrator you will\nbe responsible for the administration, integration, and optimization of\npharmacy information technology (IT) systems. This role serves as a technical\nanalyst applying contemporary IT knowledge to deploy and maintain systems\ninfrastructure. You will complete medical device software/firmware updates,\npurchase and maintain supporting hardware, and support these solutions\nthroughout their lifespan. Project work may be assigned and will include\nhigh-impact initiatives such as: new facility deployments, expansion of\npharmacy services, and new systems integration. \n\n \n\n UCLA Health is a world-renowned health system with four\naward-winning hospitals and dozens of primary care practices, specialty\npractices, urgent care centers, and other ancillary locations throughout metro\nLos Angeles. We are also home to the David Geffen School of Medicine, an\ninternationally-respected center of medical learning and research. Through the\nefforts of our outstanding people, we have become Los Angeles’ trusted provider\nof exceptional, compassionate patient care. If you’re looking to experience\ngreater challenge and fulfillment in your career, you can at UCLA Health. \n\n \n\n Schedule: Monday–Friday, 8:00am-5:00pm \n\n Hourly Salary Range: $39.93–$66.60 \n\n Bargaining Unit: TX - UPTE \n\n\n\n\n\n Qualifications \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n We are seeking a dedicated professional with: \n\n\n • Bachelor’s degree in\n healthcare data or related field and/or equivalent combination of\n education and experience.\n, • 2 years of experience\n working in a healthcare setting or within the healthcare industry at\n large.\n, • Knowledge/experience\n related to healthcare data.\n, • Ability to establish and\n maintain cooperative working relationships with co-workers and\n professional staff.\n, • Ability to set priorities\n which accurately reflect the relative importance of job responsibilities.\n, • Ability to perform job\n requirements with frequent interruptions and/or distractions.\n, • Ability to work\n independently and follow through on assignments with minimal supervision.\n, • Ability to communicate\n orally on a one-to-one basis using appropriate vocabulary and grammar to\n obtain information, explain policies and procedures, and to persuade others\n to accept or adopt a specific opinion or action.\n, • Understanding of system\n performance monitoring and actions that can be taken to improve or correct\n performance. Knowledge of the design, development and application of\n technology and systems to meet business needs.\n, • Experience adapting\n equipment and technology to serve user needs.\n, • Knowledge of state and\n federal regulations relating to the practice of pharmacy.\n, • Knowledge of and\n compliance with California State Board of Pharmacy, University of\n California, and federal rules and regulation governing pharmacy.\n\n\n\n\n\n\n

Champion an AI-first development approach to multiply developer productivity and drive adoption of AI-assisted practices across the organization. Mentor and lead developers by cultivating curiosity and deep technical understanding.

DataAnnotation is committed to creating high-quality AI. Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule. This role is designed to fit a variety of lifestyles — whether you’re looking to contribute part-time alongside a current position, pursue it full-time, or engage periodically as a flexible professional opportunity. We're currently expanding into an exciting new area – teaching AI Assistant models to be a more useful tool for finance professionals. We're seeking experienced finance professionals with advanced degrees (MBA+) and professional experience to use their expertise to help shape how AI understands financial principles and decision-making. We’re growing a team of finance experts, and as the team grows, so will your opportunities. In this role, you might: • Review and improve AI Assistant answers to questions about macro trends, corporate finance, and capital markets, • Leverage your education and work experience to check the reasoning and accuracy of an AI Assistant's work, • Push the models with complex, real-world scenarios and edge cases to see where their reasoning holds up – and where it doesn’t., • Share clear, structured feedback to help make each new version of the AI smarter and more reliable. To succeed in this position, you should have expert-level financial reasoning and formal training in a finance-related discipline. A Master’s or PhD (completed or in progress) is strongly preferred. Relevant backgrounds include Financial Accounting, Investment Banking, Corporate Development, Wealth Management, and Insurance Planning. Benefits: • This is a full-time or part-time REMOTE position, • You’ll be able to choose which projects you want to work on, • You can work on your own schedule, • Projects are paid hourly starting at USD $50-$60 per hour, with bonuses on high-quality and high-volume work Responsibilities: • Give AI chatbots diverse and complex problems and evaluate their outputs, • Evaluate the quality produced by AI models for correctness and performance Qualifications: • Fluency in English (native or bilingual level), • Detail-oriented, • Proficient in financial analysis, financial modeling, data analysis, and other reasoning exercises related to finance management, • A current, in progress, or completed Masters and/or PhD is is preferred but not required Note: Payment is made via PayPal. We will never ask for any money from you. PayPal will handle any currency conversions from USD. This is an independent contract position.

We are seeking a strategic and hands-on Senior IT HCM Business Systems Analyst with deep expertise in HCM best practices, Benefits, Payroll and Time processes, to support our HR technology landscape. The ideal candidate thrives at the intersection of HR, IT, and business operations, translating complex business needs into scalable IT solutions. The Senior IT HCM Systems Analyst will maintain and enhance the HCM and Payroll systems and processes while supporting the implementation of new technologies and integrations. This role is a critical part of the company's HR technology environment with an emphasis on business process and its system configurations and continual improvement of the end-user experience. It is part of a lean team dedicated to driving efficiency within IT department to support the business. CalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. • Medical, Dental, Vision, • low-cost premiums even for family coverage, • Company-paid life/AD&D insurance, • Company-paid short-term disability, • Paid sick/vacation/holiday, • 401k/Company Funded Pension Program (program is dependent upon location and job type), • Employee Assistance Program (EAP), • Act as the IT- HCM SME and collaborate with stakeholders and cross-functional teams to define and document business needs, • Liaise directly with business areas to identify key requirements and initiate designs of applications independently, conferring with various user groups to define business needs and potential solutions within the Dayforce Application, • Configure, administer, and optimize Dayforce system - Core HR, WFM, Payroll, Benefits, and support the HR, Payroll, and Benefits teams, • Implement updates regarding Major Releases to HR/Benefits and Payroll teams, highlighting key changes and enhancement opportunities, • Troubleshoot and resolve complex system issues, perform audits and validations to ensure data integrity, • Develop and execute test plans, reports, and audit processes to validate the functionality and accuracy of the configured payroll and HR process; ensure business signoff, • Partner with developers to build integrations with other applications or third-party vendors, • Create and maintain clear documentation (process flows, configuration guides, test scripts), • Assist HR teams with system-related issues and provide training to end-users, • Support compliance, JSOX audits requirements, and year-end processing as needed in the HR and Payroll area, • Assist with developing feeds, APIs, and integrations between the HR/Payroll system and other enterprise and reporting applications, • Master’s or minimum a bachelor’s degree in computer science and/or Human Resources/ Business Administration or related field., • SAP/ Success Factors Certifications, PMP certifications are an added advantage, • Good understanding and exposure for Dayforce Application in modules - Core HR, WFM, Payroll, Benefits, • Demonstrated ability to be the primary point of contact for solving complex backend/data issues across technical HR systems and partner with stakeholders to implement solutions, • Ability to define systems requirements, design, and prototype business processes, test complex functionality, train others, and work in a team environment, • Experience in executing system upgrades, testing, and enhancement analysis, • Ability to configure forms, reports, and workflows to suit business requirements, and document configurations, workflows, and procedures, • Good understanding of HR, benefits, and payroll process integrations; experience supporting union environments; good understanding of California labor laws (meal/rest, split shifts, overtime, final pay, etc.), • Strong knowledge of benefits and payroll integration with Finance (posting to GL), and third-party providers (e.g., tax, garnishments, benefits), • Demonstrated understanding of benefit plans and related configurations, • Experience in designing and implementing benefits interfaces with various benefits providers; participate in technical design discussions for interfaces, • Excellent communication, facilitation, and stakeholder engagement skills, • Strong and clear communication skills, • Strategic thinking and attention to detail, • Strong documentation and analytical skills, • Ability to manage multiple priorities and tight deadlines, • Collaborative and customer-focused mindset, • Key player in optimizing our HR technology landscape across multiple manufacturing sites #LI-MF1

Job Title: Specialist, Quality Process Engineer (Zeiss Calypso CMM Programmer). Work closely with engineering, manufacturing, and quality assurance teams to address measurement-related issues and improve overall product quality. In lieu of a degree, minimum of 8 years of prior related quality experi

Job Description Why Nikon Metrology? You would be joining a global company and becoming part of the future, giving you the opportunity to enter a career where you can help to shape and define innovation. Job Purpose: The Business Development Manager plays a key role in driving growth by leading customer interactions for our industrial X-ray imaging and CT scanning services. This position oversees the full lifecycle of inspection service projects—from first customer contact and proposal creation to project completion and follow-up. The Business Development Manager role is a commission-qualified position offering base pay plus commission. Key Areas of Responsibility: Will include, but not limited to the following: • Develop targeted campaigns to reach existing and new customers in defined geography., • Full owner of revenue growth in defined territory., • Outbound strategic prospecting includes calls, emails, & social media., • Effectively communicate technical information to prospects across multiple industries., • Provide forecasting for the territory as well as identify resources needed to maintain or gain customers., • Voice of customer communications – ensure team knows what to deliver., • Work with Nikon Metrology prospects and customers to evaluate their applications & projects., • Propose scanning solutions to meet customer’s needs., • Respond to all inquiries and customer request in a timely manner., • Become immersed in digital X-ray and CT technology use, trends and applications., • Educate customers & prospects in person and via web meeting about X-ray and CT scanning technology., • Manage and input accurate CRM data in a timely manner., • Other duties as assigned. Ancillary Responsibilities: • Assist in distributing pertinent technical information to sales personnel., • Professionally Represent Nikon at all Times. Qualifications: Essential Required Knowledge, Skills, and Abilities: • A two-year technical degree or bachelor’s degree., • Three years’ experience in technical or industrial sales., • General knowledge of manufacturing processes including but not limited to aerospace, electronics, medical devices, additive manufacturing, automotive manufacturing., • Strong understanding of industrial x-ray & CT imaging systems and components, or other equivalent technical experience., • Ability to effectively communicate with Nikon Metrology employees, customers and members of management in a professional manner., • Ability to provide technical solutions to customers with a high degree of professionalism., • Willing and able to travel up to 20%-25% of the time., • Strong computer skills., • Self-motivated and well organized. Certificates, License, Registrations: • Valid driver’s license and ability to be insured., • Valid passport and ability to travel outside of the United States. Desirable: • Previous industrial X-ray / CT experience., • Previous entrepreneurial experience., • Aerospace industry experience. Functional Competencies: • Ability to observe, monitor, collect and record data., • Ability to manage people and multiple projects in a fast-paced environment., • Ability to review data and identify trends and draw conclusions., • Ability to communicate effectively as an individual and within a team. Direct Reports: N/A Budget Responsibility: N/A Direct Reports: N/A Budget Responsibility: N/A Working Environment/Physical Requirements: • Flexible travel availability on short notice, • 20-25% domestic and international travel required., • Occasional weekend and evening work, as needed. How We Take Care of Our Team Culture Spirit • Work as a Team, Act as a Family! We believe in bringing our team members together in a diverse and friendly company atmosphere to celebrate and socialize to inspire each other and keep our community strong and close inside and out of the office. Work Life Balance • We understand the hustle and bustle of everyday life and the importance of work life balance, which is why we offer in office and hybrid working dynamics + refresh days! Personal Development • We want you to grow with us and be the best version of yourself, which is why we offer competitive compensation, training/advancement opportunities and tuition reimbursement. Amazing Medical Benefits & Perks • We’ll take care of you with industry leading medical, dental, vision plans and many more benefits that allow us and you to continue to be AMAZING! As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or national origin or because he or she is an individual with a disability or disabled veteran, Armed Forces service medal veteran, recently separated veteran, or active duty wartime or campaign badge veteran, or therein after referred collectively as “protected veterans”. Compensation details: 90000-120000 Yearly Salary PIdb64c272620d-25405-40421102

KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, CNC, Milling, Machine, Programming.

Date Posted: 2026-04-24 Country: United States of America Location: US-AZ-TUCSON-M07 ~ 3292 E Hemisphere Loop ~ BLDG M07 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. With our three market leading businesses, world-class operations and investments in research and development, we offer capabilities and opportunity no one else can. Together, we push the boundaries of known science and find new ways to connect and protect our world. Raytheon brings the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. We deliver solutions that help our nation and allies defend freedoms and deter aggression, creating a safer, more secure world. Join us and help shape the future of aerospace and defense. What You Will Do: As a Principal Manufacturing Development Engineer, you’ll lead and coordinate projects and improvements across the extended value streams by providing technical manufacturing support to a program from the early development phases through transition to production. In this highly visible role, you’ll leverage your technical knowledge of manufacturing capabilities, product technologies, factory requirements and business processes to establish and execute the manufacturing plan and influence technical program decisions to support the overall program value stream. This Job will require travel to the UAE in support of supplier stand-up. Likely less than 25%. Typical Responsibilities will Include: • Participation in manufacturing and test requirements development, • Design for manufacturing activities, • Manufacturing process development and factory capabilities analysis to ensure factory readiness and improve product producibility Your main responsibilities will include: • Developing Manufacturing Data Packages (MDPs) including assembly instructions, workflow/routing, labor standards, tool and fixture designs., • Providing technical input and peer review to engineering designs and design changes., • Providing technical guidance and problem solving to factory engineers, • Applying manufacturing engineering skillsets across the extended value stream to resolve constraints and improve process and product designs Other Responsibilities may Include: • Serving as the manufacturing and producibility authority within the program, • Recommending process and procedural changes to ensure that objectives in the areas of cost, efficiency, and quality are met, • Designing, controlling, and improving the producibility of products through collaboration with a multi-disciplined team, • Identifying and resolving constraints across the program, • Participating in corrective action investigation This job is posted as ONSITE and is based at Raytheon’s Tucson, AZ facility. Qualifications You Must Have: • Typically Requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM), and minimum 8 years of relevant experience., • Experience working in manufacturing production., • Experience with manufacturing process development or improvement, • Ability to work on programs requiring special program access, • Ability to obtain and maintain a Bureau of Alcohol, Tobacco, Firearms and Explosives Access (ATF) clearance. Qualifications We Prefer: • Ability to identify, reduce and eliminate cost, quality and schedule constraints through technical engagements along with an innovative mindset that drives continuous improvement, lean manufacturing and keeps pace with advances in technology, • Technical drawing interpretation, Geometric Dimensioning and Tolerancing (GD&T) and proficiency with CAD solid modeling tools (preference for CREO/ProE), • Demonstrated hands-on mechanical aptitude with the ability to work across disciplines in a team environment, • Experience with technical writing and interpreting and improving technical drawings and communicating technical information to different audiences, • Experience with MRP systems and Manufacturing Readiness Assessments, • Prefer Bachelor’s or Master’s Degrees in the following areas: Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Chemical Engineering, or Electrical Engineering, • Current DoD security clearance (secret) What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! • Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products., • This position requires ability to obtain a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Security Clearance FAQs - United States Department of State, • #LI-ONSITE As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Shuttle Driver - Class B Required | Overnight Only | Full-Time With more than 25 years in business, The Parking Spot has grown into the largest near-airport parking company in the United States with over 2,000 valued team members spread across over 40 locations nationwide. We are proud to offer an Employee Ownership Program, allowing every team member the opportunity to receive a direct financial stake in The Parking Spot’s success. As employee owners, every one of us plays a part in providing exceptional service to our guests across the country. Our professional Shuttle Drivers play an important role in our operation in providing safe and courteous transportation of customers between the parking facility and airport. If you share our values for team, people, and service, we encourage you to apply with us! Pay Rate: $18.87 per hour (plus tips - cash and mobile) with regular bonus opportunities License Requirement: Class B with Passenger Endorsement What We Offer: • Participation in and financial benefit from our shared employee ownership program, • Instant offers – standout candidates can receive conditional offers immediately after their interview, • Great tips featuring both cash and mobile tipping, and regular bonus opportunities for those who are eligible, • Consistent schedules, • For those who are eligible to enroll: Medical, Vision, Dental, and 401(k) plan benefits, • For those who are eligible: Paid Time Off, Vacation Pay and Paid Holidays, • Training and professional development opportunities Key Responsibilities of Shuttle Drivers: • Safely transport up to 15 passengers to and from the airport terminal and TPS parking locations while adhering to all safe driving practices, • Perform the appropriate pre-trip and post-trip inspections, • Greet each customer with a smile, offering to assist with their luggage, • Provide pleasant customer service, • Demonstrate knowledge of the facility and airport terminals, • Cooperate with all team members to provide the best possible service, • May cross-train for other frontline positions as directed by management, • Comply with all applicable regulations and requirements governing operation of commercial vehicles, • Perform additional duties as reasonably requested by Management Knowledge, Skills, & Experience of Shuttle Drivers: • Must be at least 21 years of age, • High school education or equivalent, • Previous driver and/or customer service experience preferred, • Currently holds and is able to maintain a satisfactory driving record in accordance with the Employee Handbook, • Currently holds a CDL and any applicable licenses or badges as required by governing authorities to operate a commercial vehicle, • Must be willing to pass a physical as part of the selection process as required by airport, federal DOT and/or state regulations, • Can read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records in compliance with the DOT regulations that require these skills, • Ability to safely lift up to 50 pounds to assist with luggage with or without an accommodation At The Parking Spot, we don’t just accept difference - we celebrate and seek it. We believe a diverse, inclusive, and equitable company is one where all employees, partners, and customers are welcome, supported, and valued. As a company in the travel industry, we witness the power of bringing individuals from different backgrounds and communities together. We treat all others with dignity and respect and stand firmly against racism and discrimination in any form. We intentionally develop diverse teams and relationships to ensure all voices are heard and to foster equal opportunity for all. We are committed to listening, learning, and growing because we know that our work is never done.

Shuttle Driver - Class B Required | Overnight Only | Full-Time With more than 25 years in business, The Parking Spot has grown into the largest near-airport parking company in the United States with over 2,000 valued team members spread across over 40 locations nationwide. We are proud to offer an Employee Ownership Program, allowing every team member the opportunity to receive a direct financial stake in The Parking Spot’s success. As employee owners, every one of us plays a part in providing exceptional service to our guests across the country. Our professional Shuttle Drivers play an important role in our operation in providing safe and courteous transportation of customers between the parking facility and airport. If you share our values for team, people, and service, we encourage you to apply with us! Pay Rate: $18.87 per hour (plus tips - cash and mobile) with regular bonus opportunities License Requirement: Class B with Passenger Endorsement What We Offer: • Participation in and financial benefit from our shared employee ownership program, • Instant offers – standout candidates can receive conditional offers immediately after their interview, • Great tips featuring both cash and mobile tipping, and regular bonus opportunities for those who are eligible, • Consistent schedules, • For those who are eligible to enroll: Medical, Vision, Dental, and 401(k) plan benefits, • For those who are eligible: Paid Time Off, Vacation Pay and Paid Holidays, • Training and professional development opportunities Key Responsibilities of Shuttle Drivers: • Safely transport up to 15 passengers to and from the airport terminal and TPS parking locations while adhering to all safe driving practices, • Perform the appropriate pre-trip and post-trip inspections, • Greet each customer with a smile, offering to assist with their luggage, • Provide pleasant customer service, • Demonstrate knowledge of the facility and airport terminals, • Cooperate with all team members to provide the best possible service, • May cross-train for other frontline positions as directed by management, • Comply with all applicable regulations and requirements governing operation of commercial vehicles, • Perform additional duties as reasonably requested by Management Knowledge, Skills, & Experience of Shuttle Drivers: • Must be at least 21 years of age, • High school education or equivalent, • Previous driver and/or customer service experience preferred, • Currently holds and is able to maintain a satisfactory driving record in accordance with the Employee Handbook, • Currently holds a CDL and any applicable licenses or badges as required by governing authorities to operate a commercial vehicle, • Must be willing to pass a physical as part of the selection process as required by airport, federal DOT and/or state regulations, • Can read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records in compliance with the DOT regulations that require these skills, • Ability to safely lift up to 50 pounds to assist with luggage with or without an accommodation At The Parking Spot, we don’t just accept difference - we celebrate and seek it. We believe a diverse, inclusive, and equitable company is one where all employees, partners, and customers are welcome, supported, and valued. As a company in the travel industry, we witness the power of bringing individuals from different backgrounds and communities together. We treat all others with dignity and respect and stand firmly against racism and discrimination in any form. We intentionally develop diverse teams and relationships to ensure all voices are heard and to foster equal opportunity for all. We are committed to listening, learning, and growing because we know that our work is never done.

Job DescriptionCNC Mills Programmer CNC Mill ProgrammerMason welcomes people who share our determination and high standards to join us in doing work that moves the world forward. We design, manufacture, and market highly engineered products and systems principally for the aerospace and defense markets. Mason, a wholly-owned subsidiary of Transdigm, offers world-class control devices and subsystems — such as control grips, throttles, HaWC controllers, and communications interfaces — for today's advanced cockpits, military vehicles, and other specialized applications. Our solutions fall into two broad categories: control products and components.Title:CNC ProgrammarJob Family:ProductionReports to:Manufacturing ManagerFLSA StatusNon exemptEEOC Class: Craft WorkerSummaryThe experienced CNC Mill Programmer will have advance programming knowledge for CNC Mills (4 & 5 axis) machines using Mastercam. The programmer will also have advance knowledge of machining tools including cutters and inserts. He / She must have ability to utilize setup reduction techniques and optimal machining / personal usage. The programmer will need a strong verbal and written communication skills is required for this position.Position DutiesEssential functions of the position include, but are not limited to: • Create CNC programs utilizing the latest MasterCam software., • Tests, modifies and enhances set up procedures., • Maintains and preserves NC code and CAM libraries., • Develops, prepares, optimizes, and maintains Set-up and operation documents., • Records and maintains the established processes to ensure only authorized and documented changes are made., • Studies blueprints, sketches, drawings, specifications or sample part to determine dimensions and tolerances of finished work piece, sequence of operations and set up requirements., • Design and select work holding fixtures, cutting tools, attachments, accessories, and material size needed when creating program., • Use of Renishaw probing cycles in CNC program., • Supports prove out process with Machinist and inspection to meet conformance., • Continuous improvement to new and existing processes., • Able to design fixtures if needed, • Completes task on time, • Have vision to drive DFM and part/tooling standardization, • Understands and live by company's ethics and business conduct policies, • Other duties as assignedQualificationsEducation & Experience:, • CNC multi axis (5 axis) Mill programming using MasterCam software: 7 years (Required), • Solid Modeling: 3 years (Required), • Use of SolidWorks and Cimco editor is a plus, • Able to trouble shoot programming errors and make CNC's run more efficiently, • Knowledge of Horizontal and Vertical Mills Multi axis machines, • Strong problem-solving skills, • Attention to detail, • Ability to read blueprints and advance GD&T knowledge, • Good machining practice and knowledge of speeds and feeds., • Cutting technique for stainless steel, aluminum, and other materials required, • Experience with working with castings is a plus, • Must have knowledge of CNC G-codes and M-codes., • Knowledge of Renishaw probing use, • Knowledge of HAAS and Fanuc control, • General computer skills, including Microsoft office, • Strong Shop Math; analytic geometry, algebra and trigonometry, • High school diploma or GEDPhysical Demands, • While performing the duties of this job, the employee is regularly required to, stand, sit; talk, hear, and use hands and fingers to operate machinery, • Reaches, bends, twists, • Regularly lift 30-50 pounds, • Regularly perform repetitive tasks, • Regularly possess manual dexterity to put parts or pieces together quickly and accurately, • Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focusPay Range: $40.00- $65.00 hourly.OtherThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). This position requires either U.S persons (as defined in applicable export regulations) or a non [1] U.S person who is eligible to obtain required export authorization(s). Mason is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability Compensation details: 40-65 Hourly Wage PI1e0e7c7e3953-25405-40149762

Date Posted: 2026-02-25 Country: United States of America Location: US-AZ-TUCSON-9022 ~ 9022 S Rita Rd ~ BLDG 9022 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. What You Will Do: As a Sr. Manufacturing Development Engineer you’ll lead and coordinate projects and improvements across the extended value streams by providing technical manufacturing support to a program from the early development phases through transition to production. In this highly visible role, you’ll leverage your technical knowledge of manufacturing capabilities, product technologies, factory requirements and business processes to establish and execute the manufacturing plan and influence technical program decisions to support the overall program value stream. Typical Responsibilities will Include: • Participation in manufacturing and test requirements development, • Design for manufacturing activities, • Manufacturing process development and factory capabilities analysis to ensure factory readiness and improve product producibility Your main responsibilities will include: • Developing Manufacturing Data Packages (MDPs) including assembly instructions, workflow/routing, labor standards, tool and fixture designs., • Providing technical input and peer review to engineering designs and design changes., • Providing technical guidance and problem solving to factory engineers, • Applying manufacturing engineering skillsets across the extended value stream to resolve constraints and improve process and product designs Other Responsibilities may Include: • Serving as the manufacturing and producibility authority within the program, • Recommending process and procedural changes to ensure that objectives in the areas of cost, efficiency, and quality are met, • Designing, controlling, and improving the producibility of products through collaboration with a multi-disciplined team, • Identifying and resolving constraints across the program, • Participating in corrective action investigation This job is posted as ONSITE and is based at Raytheon’s Tucson, AZ facility. Qualifications You Must Have: • Typically Requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM), and minimum 5 years of relevant experience., • Experience working in manufacturing production., • Experience with manufacturing process development or improvement, • Ability to work on programs requiring special program access, • Ability to obtain and maintain a Bureau of Alcohol, Tobacco, Firearms and Explosives Access (ATF) clearance. Qualifications We Prefer: • Ability to identify, reduce and eliminate cost, quality and schedule constraints through technical engagements along with an innovative mindset that drives continuous improvement, lean manufacturing and keeps pace with advances in technology, • Technical drawing interpretation, Geometric Dimensioning and Tolerancing (GD&T) and proficiency with CAD solid modeling tools (preference for CREO/ProE), • Demonstrated hands-on mechanical aptitude with the ability to work across disciplines in a team environment, • Experience with technical writing and interpreting and improving technical drawings and communicating technical information to different audiences, • Experience with MRP systems and Manufacturing Readiness Assessments, • Prefer Bachelor’s Degrees in the following areas: Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Chemical Engineering, or Electrical Engineering, • Current DoD security clearance (secret) What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! • Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products., • This position requires ability to obtain a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Security Clearance FAQs - United States Department of State, • #LI-ONSITE As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job DescriptionCNC Programmer – Anaheim, CA Location: Anaheim Pay: DOE (Depending on Experience) Schedule: To be discussed Position Overview We are seeking an experienced CNC Programmer to join a manufacturing team in Anaheim. This role is responsible for creating, editing, and optimizing CNC programs to ensure efficient and accurate production. Key Responsibilities • Develop CNC programs using CAM software (Mastercam, Fusion 360, or similar), • Read and interpret blueprints and technical drawings, • Assist with machine setup, tooling, and offsets, • Perform first article inspections and make program adjustments, • Troubleshoot machining issues and improve cycle times, • Collaborate with production and engineering teamsQualifications, • Experience with CNC programming (mills and/or lathes), • Proficiency with CAM software, • Ability to read blueprints and understand tolerances, • Knowledge of G-code and program editing, • Strong attention to detail and problem-solving skillsPreferred, • Multi-axis machining experience (4 or 5-axis), • Experience working with tight tolerances (±.001 or better), • Manufacturing environment experienceApply, • Download the Express Jobs App (iTunes or Google Play), • Call/Text: (714) 399-0951 #3413ana

Treat our consultants and clients the way we would like others to treat us!Interested in joining our team? Check out the opportunity below and apply today!.

At a Glance Company: H&H Machining Center, Inc. Location: Valencia, CA 91355 (On-site) Job Type: Full-Time Pay Range: $35 – $45 per hour (based on experience) Shift: Monday – Friday | Day Shift Overtime: As needed based on production demand Experience Level: Senior (7+ years CNC machining & programming experience) Work Authorization: U.S. Person required (ITAR compliance) Why This Role Exists This role exists due to continued growth in aerospace and defense manufacturing programs requiring high-precision prototype and low-volume production components. At H&H Machining Center, this position is critical to producing tight-tolerance, flight-critical parts where quality, consistency, and machining expertise directly impact aerospace and defense program success. The Work You’ll Be Doing In this role, you will set up and operate CNC mills and lathes including 3, 4, and 5-axis machines while programming parts from scratch using Mastercam or Fusion 360. You will machine prototype and low-volume precision components directly from engineering blueprints, ensuring all GD&T requirements are met. You will be responsible for selecting tooling, setting offsets, and establishing setups to maintain process stability and repeatability. You will perform in-process inspection using precision measurement tools including micrometers, calipers, and CMM equipment while maintaining tight tolerances of ±0.0005” or better. You will troubleshoot toolpaths, optimize cutting parameters, and make machine-level adjustments using G-code knowledge as needed. Collaboration with engineering, quality, and other machinists will be required to ensure all parts meet AS9100D standards and customer requirements. Machines, Controls & Software You will work with CNC milling and turning equipment including 3-axis, 4-axis, and 5-axis machines. CNC controls include Fanuc, Haas, and Mazatrol systems. CAM programming is performed using Mastercam (preferred) or Fusion 360, with G-code required for machine-level edits and troubleshooting. Inspection tools include micrometers, calipers, and CMM systems for precision measurement and verification. Materials You’ll Work With Aluminum Steel / Alloy Steel Stainless Steel Titanium Inconel What We’re Looking ForRequired: 7+ years CNC machining and programming experience Strong experience with CNC mills and lathes Ability to program parts from scratch using CAM software Proficiency in Mastercam and/or Fusion 360 Strong blueprint reading and GD&T interpretation skills Experience holding tight tolerances (±0.0005” or better) Familiarity with Fanuc, Haas, and/or Mazatrol controls Experience machining aerospace materials such as titanium and Inconel U.S. Person status required (ITAR compliance) High school diploma or equivalent required Preferred: Multi-axis machining experience (4/5-axis) Aerospace or defense machining experience Vocational or technical training in machining or manufacturing Experience working in AS9100D environments Why Machinists Like Working Here Machinists choose H&H Machining Center because the work is technical, challenging, and meaningful within aerospace and defense manufacturing. The shop environment is clean, organized, and equipped with modern CNC machines. Employees work on complex, non-repetitive parts with real responsibility from setup through inspection. The company offers stable long-term employment, strong team collaboration, and opportunities to grow into more advanced machining and programming roles. Pay, Benefits & Schedule Pay Range: $35 – $45 per hour (DOE) Health insurance Paid holidays and vacation Stable direct-hire position (no staffing agencies) Long-term aerospace and defense machining work Schedule: Monday – Friday, Day Shift Overtime: As needed Apply Submit your resume through this job posting Qualified candidates will be contacted for interview Apply now or save this job to apply later

Job Description As a Child Development Center Site Supervisor at Fruit of the Vine Child Development Center, you'll play a crucial role in shaping the futures of young learners. You'll lead with confidence, overseeing our childcare and development programs while nurturing the physical, emotional, and intellectual growth of children. Working closely with the Owner and Program Director, you'll ensure that our holistic approach to childhood development is effectively implemented. With your expertise, you'll guide curriculum planning and staff development, fostering an environment where both children and educators thrive. At Fruit of the Vine, we believe in the power of community and growth. You'll enjoy a supportive and positive work environment, comprehensive training, and the chance to make a genuine impact. We offer competitive benefits, including paid time off after 90 days and the joy of sharing family-oriented meals. If you're ready to use your skills to nurture tomorrow's leaders, we invite you to join our passionate team. Compensation: $30 hourly Responsibilities: • Recruit and suggest suitable staff replacements to the director/owner proactively before any vacancies arise, • Develop and oversee an exceptional early childhood educational curriculum in alignment with the Director/Owner's approval, • Conduct weekly staff meetings and be available during emergencies for immediate support, • Provide monthly in-service staff training and utilize external training resources in the community when necessary, • Uphold the Child Care Center's overall goals and objectives effectively, • Establish a clear division of labor among staff for general cleaning and maintenance of the premises, • Complete staff write-ups as needed to maintain a productive work environment, • Ensure all staff members adhere to the daily schedule consistently, • Maintain a dynamic waitlist to ensure full capacity through an active child enrollment outreach program, • Stay compliant with building license requirements and oversee building and equipment maintenance diligently, • Adhere to Title 22, Title 5, and Health and Safety regulations on a daily basis, • Conduct classroom sessions in an organized manner, fostering a disciplined yet nurturing atmosphere, • Teach curriculum subjects using approved methods and materials under the School Administration's guidance, • Supervise, train, and support teaching staff and new Day Care personnel in the classroom, • Keep the school environment orderly, oversee equipment repairs, and manage supplies efficiently, • Handle billing procedures monthly and ensure all necessary forms and notices are distributed promptly, • Maintain up-to-date attendance records and follow up on absences exceeding two days, • Prepare lesson plans, progress charts, and report cards for classroom children, conducting parent conferences biannually, • Organize and participate in parent meetings, open houses, and weekly meetings with the program director, • Fulfill CACFP Food Program Manager/Administrator duties as outlined, • Ensure compliance with CCTR and CSPP contracts daily, meeting all deadlines accurately, • Plan and execute annual events for staff and children, • The ideal candidate for the Site Supervisor position at the Child Development Center in Los Angeles, CA, must possess a Bachelor's degree or higher, which includes 24 ECE/CD units covering core courses, 6 administration units, and 2 adult supervision units, • A current Site Supervisor Permit or Program Director Permit issued by the California Commission on Teacher Credentialing is mandatory for this role, • The Site Supervisor should be capable of engaging in light physical work, such as lifting and carrying children weighing 14 to 30 pounds, bending, crouching, kneeling, and performing other light physical activities necessary for childcare, • Maintaining composure under pressure and effectively managing stress is crucial for the Site Supervisor, along with creating a pleasant work environment free from adverse conditions FRUIT OF THE VINE CHILD DEVELOPMENT CENTER Nurturing Tomorrow's Leaders At Fruit of the Vine, we believe in the transformative power of early childhood development, which we fondly refer to as "the vine." We are committed to a holistic approach that recognizes the importance of nurturing young minds and hearts during their formative years. We understand that a child's development during their preschool years lays the foundation for a bright future. Our mission is to encourage, train, and build up these young individuals to become productive leaders in their community, the much-anticipated "fruit." We achieve this by providing a safe and nurturing environment, the essential "roots," where we meet their physical, emotional, intellectual, and social needs.

Ability to follow guidelines and conduct online research using search engines, online maps, and website information. A Day in the Life of an Online Data Analyst: .

A company is seeking a Bilingual Japanese/English Senior IT Manager to join their team in Carson, CA. This position is responsible for leading client-facing system integrations (EDI/API), providing technical expertise to Quality Control initiatives, and spearheading the Digital Transformation (DX) roadmap. A bachelor's degree, at least 10 years' experience in 3PL/Logistics, knowledge of WMS, Forwarding System, and EDI standards, experience in Digital Transformation, RPA, and Microsoft 365 data management, strong knowledge of SDLC, and the ability to speak, read, and write Japanese is required. This is a full-time, in-person, position with excellent benefits including 401K.

Our client is a prominent national Litigation Support company. The general duties as a Director of Business Development include the maintenance and growth of an assigned territory, including managing and growing existing accounts as well as new client acquisition. The Director of Business Development will build relationships at all levels (i.e. Paralegals, Legal Secretaries, Legal Administrators, Attorneys, Partners, etc.) in Law Firm, Corporate Legal and Insurance accounts. ESSENTIAL JOB FUNCTIONS: · Responsible for the sales of litigation support services as provided by our client · Demonstrates selling skills and product knowledge in all areas related to sale of services · Complete understanding of pricing and proposal models of all services · Maximize existing client relationships to grow revenue within the portfolio · Trains clients on the use of various tools · Assists in the implementation of company marketing plans as needed · Responsible for sourcing and developing client referrals, including new firms · Attend all required team meetings including weekly sales call, training sessions, etc. · Maintains accurate records of all sales activities within their portfolio · Adheres to all company policies, procedures, and business ethics codes · Demonstrate ability to interact and cooperate with all company employees REQUIREMENTS: · Proven ability to achieve sales quotas · Ability to work in fast paced environment and hit the ground running · Reliable transportation, up-to-date insurance, and a clean driving record · Travel as required by territory boundaries and Company requirements · Base salary plus commission with benefits package · Experience working in the Legal Vertical and a Juris Doctor (JD) preferred but not required SKILLS: · Excellent verbal and written communication skills · Excellent interpersonal skills

Adventist Health White Memorial is seeking a dynamic and experienced individual to lead our Internal Medicine Residency Program as Program Director. This position presents a unique opportunity to shape the future of medical education, mentor residents, and contribute to the advancement of internal medicine within our institution. HIGHLIGHTS: Community-based ACGME program Mission-focused Team of dedicated, diverse, family-oriented faculty MAJOR RESPONSIBILITIES: Demonstrate a commitment to Residency Education and to supporting institutional and program mission and aims. The Program Director must ensure continuing accreditation of the program by comprehending and complying with the Accreditation Council for Graduate Medical Education Institutional, Common and Specialty-Specific Program Requirements, as well as Accreditation Council for Graduate Medical Education and Review Committee policies and procedures and Adventist Health GME policies and procedures. Develop and continuously improve a high-quality, comprehensive Internal Medicine curriculum that meets the requirements of the State of California, Joint Commission on the Accreditation of Healthcare Organizations, Accreditation Council for Graduate Medical Education, American Board of Internal Medicine and the sponsoring institution, including specialty-specific competencies and milestones. This will be reflected in a board pass rate greater than 80% and average in-service examination scores above the national mean. Responsible for mentoring the teaching faculty and monitoring their academic appointments, assignments, professionalism, engagement, and overall effectiveness of their educational activities. Conduct an annual performance review of each faculty and provide a copy of each written review to the respective faculty member (and Department Chair). Develop a faculty development program that encourages professional growth and instruction on evidence-based clinical and didactic teaching methods and evaluation. Recruit, retain, and promote a high-caliber resident body, reflective of the community they serve, who exhibit a commitment to excellence in whole-person patient care, demonstrate competency in scholarly activity, display high ethics and professionalism and actively participate in their own medical education and that of others. Cultivate a psychologically safe working and learning environment for the residents that allows them to confidentially raise concerns and provide feedback, without fear of intimidation or retaliation. Demonstrate an appreciation for the role financial stewardship plays in the development and management of a residency budget that ensures the availability of adequate ACGME-required resources to a facilitate resident education and scholarly activity. Understand Graduates Medical Education funding sources and mechanisms, as they relate to the residency program. Establish and maintain an education liaison with community-based and academic teaching institutions, as required. Positively interact with the faculty of those institutions to coordinate faculty development, medical student curriculum, and resident training and education, as needed. Perform such duties as are appropriate and necessary to the position and operation of Adventist Health White Memorial Internal Medicine Residency Program. BENEFITS: Wage Scale: $351,000 - $405,000 Competitive salaried compensation Annual bonus structure Comprehensive benefits package including medical, dental, and vision insurance Starting Bonus Retirement savings plan with employer match. Paid time off and CME allowance. Top rated malpractice insurance coverage. Relocation reimbursement QUALIFICATIONS: Must hold or be able to obtain a valid and unrestricted medical license from the State of California Shall have completed an accredited residency program in Internal Medicine Shall be certified/maintain certification with the American Board of Internal Medicine or the American Osteopathic Board of Internal Medicine Physicians 3-5 years of Internal Medicine education and/or administrative experience, preferably as a Director, Associate Director, Site Director, or Core Faculty member of an Internal Medicine Residency Training Program. LOCATION: Adventist Health White Memorial is a 353-bed, nonprofit, faith-based teaching hospital, providing a full range of inpatient, outpatient, emergency and diagnostic services to communities in and near downtown Los Angeles. Keeping our communities healthy has been our mission ever since our hospital was founded by the Seventh-day Adventist Church in 1913. Today, Adventist Health White Memorial is one of the region's leading nonprofit hospitals. Services include cardiac and vascular care, intensive and general medical care, oncology, orthopedic care, rehabilitation, specialized and general surgery, and women's and children's services. As a major teaching hospital, White Memorial also plays an important role in training physicians, nurses and other medical professionals along with being the employer of choice for the communities we serve. Downtown Los Angeles is a vibrant and diverse area with a rich history and a range of attractions. While preferences can vary, here are some of the top best things about Downtown Los Angeles: Cultural Landmarks: Downtown LA is home to several iconic cultural landmarks, including the Walt Disney Concert Hall, The Broad, and the Museum of Contemporary Art, showcasing a blend of contemporary and classical art. Historic Architecture: The area boasts a mix of historic and modern architecture, including the Bradbury Building, the Los Angeles City Hall, and the iconic Union Station, providing a glimpse into the city's rich architectural heritage. Entertainment and Sports: Downtown LA hosts several entertainment venues, including the Staples Center, home to the Los Angeles Lakers and Los Angeles Clippers, as well as numerous concerts and events. Additionally, the LA Live entertainment complex offers a variety of dining, entertainment, and nightlife options. Culinary Scene: Downtown LA is a foodie paradise with an array of dining options, from gourmet restaurants to food trucks and trendy eateries, representing diverse cuisines from around the world. Shopping: The area features a mix of upscale boutiques, trendy shops, and local markets, such as the Grand Central Market, providing an eclectic shopping experience for visitors and locals alike. Historic Districts: Downtown LA has several historic districts, including the Arts District and Little Tokyo, each offering a unique cultural experience and a glimpse into the city's diverse heritage. Outdoor Spaces: Despite being an urban area, Downtown LA offers various outdoor spaces, such as Grand Park and Pershing Square, where residents and visitors can enjoy recreational activities, cultural events, and public gatherings. Nightlife: The area is known for its vibrant nightlife, with an abundance of lounges catering to different tastes, ensuring that there is always something happening after dark. Proximity to Attractions: Downtown LA's central location provides easy access to other attractions in the city, including the Los Angeles County Museum of Art, Griffith Observatory, and the Hollywood Walk of Fame. Transportation Hub: With multiple public transportation options, including the Metro Rail and bus lines, Downtown LA serves as a transportation hub, making it convenient for residents and visitors to explore other parts of the city. Employed model through Adventist Health Medical Group (AHMG) AHMG is committed to the safety and wellbeing of our associates and patients. Therefore, we require that all associates receive all required vacc

At a Glance Company: Freeform Technologies Location: Hawthorne, CA Job Type: Full-Time Pay Range: $45 – $65/hour (based on experience) + Stock Options Shift: Flexible Overtime: Yes, as needed Experience Level: Senior Work Authorization: Must be authorized to work in the U.S. Why This Role Exists This role exists because Freeform is scaling production . Freeform is actively delivering production-scale metal parts for aerospace, defense, automation, and industrial customers. As production volume and part complexity increase, this role is critical to ensuring precision, throughput, and repeatability in post-print CNC machining. As a Senior CNC Programmer, you’ll play a key role in bridging metal additive manufacturing and high-precision 5-axis CNC machining , helping define how next-generation manufacturing actually works on the shop floor. The Work You’ll Be Doing In this role, you will: Program, set up, and run 5-axis DMG Mori CNC mills Post-machine complex metal 3D printed parts to tight tolerances Optimize toolpaths, speeds, feeds, and strategies for efficiency and part quality Machine parts directly from blueprints and 3D CAD models Hold tight tolerances (±0.001” and tighter depending on part) Perform deburring, cleaning, and finishing operations Inspect parts using micrometers, thread gauges, indicators, and probing Support preventative maintenance and cutting fluid management Collaborate closely with engineers to improve programs, fixtures, and automation Contribute to process improvement initiatives focused on throughput and repeatability This is a hands-on programming role , not a desk-only CAM position. Machines, Controls & Software You’ll work with equipment such as: Machines: DMG Mori 5-Axis CNC Machining Centers Controls: Siemens CAM Software: Mastercam (highly preferred) Inspection Tools: On-machine probing Micrometers, indicators, thread gauges, precision hand tools What We’re Looking For Required: 5+ years of 5-axis CNC mill programming experience Strong experience with DMG Mori 5-axis machines Proven ability machining aluminum, stainless steel, titanium, or Inconel Deep understanding of setups, tooling, speeds/feeds, and optimization Ability to read blueprints, GD&T, and CAD models Preferred (Not Required): Mastercam programming experience Siemens control experience Experience machining metal 3D printed parts NTMA certification or equivalent formal training Experience with automation, fixtures, or multi-axis optimization Comfortable operating cranes, forklifts, and shop equipment Materials You’ll Work With Aluminum Stainless Steel Titanium Inconel & nickel-based alloys Why Machinists Like Working at Freeform Machinists choose Freeform because: Modern 5-axis CNC equipment and cutting-edge technology Real collaboration between machinists, programmers, and engineers High-skill work — not button pushing Stable, production-focused workflows Competitive hourly pay plus meaningful equity ownership A clean, organized, state-of-the-art facility Opportunities to influence how manufacturing scales globally This is a place for machinists who want to build something new , not just run jobs. Pay, Benefits & Schedule Pay: $45 – $65/hour (DOE) Top of range reserved for exceptional technical depth and experience Benefits Include: Significant pre-IPO stock option packages 100% employer-paid Medical, Dental & Vision insurance Traditional & Roth 401(k) Relocation assistance Paid vacation, sick leave, and holidays Generous paid parental leave Free daily catered lunch & dinner Casual dress, flexible hours, and team events Apply If you’re a Senior CNC Programmer who wants to work at the intersection of automation, additive manufacturing, and precision machining , this role is built for you. Apply directly through hireCNC or save the job to come back later.

Job Duties include but are not limited to: • Provide first level technical support at the Corporate Office and remote locations. • Hardware and software support on desktop computers & laptops, software applications, printers & scanners, uninterruptable power supplies, IP deskphones, mobile phones and related technologies. • Installation and testing of computer system and peripherals. • Employee will also periodically assist in the maintenance and testing of servers, and associated network equipment. • Maintain documentations. • Perform other duties as assigned during down time such as data entry, filing, etc. • Occasional after-hours and weekend work expected.

Career Gap? Outdated Tech stack? No Interviews? Let’s Get you Hired with a Process Many job seekers assume their skills have expired simply because they’ve been out of the workforce or recently laid off. But the truth is, your foundation is still valuable — it just needs sharpening. Despite layoffs and market shifts, the tech industry still needs skilled developers. The challenge is proving you’re ready to contribute. Rejections can be discouraging, but they don’t reflect your true potential — they reflect your preparation. Re‑entering the tech industry can feel overwhelming, especially after a layoff or career gap. But you don’t have to do it alone. SynergisticIT gives you a fast, structured path back into the field. If you’ve been unemployed for 3–6+ months—or longer—you’ve probably seen how quickly the market can change. A career gap or an outdated tech stack can reduce callbacks, even when you have talent. Recruiters may assume your skills are outdated or your confidence is lower. But gaps don’t define ability. They simply require a strategy: refresh your stack, rebuild proof of work, and re-enter with structure. Since 2010 , SynergisticIT has helped candidates return to the workforce and land full-time jobs at major employers—companies like Google, Apple, PayPal, Visa, Western Union, Wells Fargo, Intel, Citi, JPMC, Walmart Labs, Deloitte , and more—often with offers between $90,000 and $154,000 depending on role and expertise. Why gaps hurt—and how to neutralize them Employers worry about currency: are your tools current? Can you still perform? The solution is demonstrating recent, relevant work: projects, certifications, and interview readiness. JOPP helps you rebuild that proof and confidence systematically. Current role demand (expressed with variety) SynergisticIT commonly supports hiring pipelines for roles such as junior software programmer , Java full stack engineer , Python/Java developer , DevOps/cloud engineer , plus data-track roles like data analyst , BI analyst , data engineer , data scientist , and ML/AI engineer . The focus areas remain: Java / Full Stack / DevOps and Data Analytics / Data Engineering / Data Science / ML/AI . Please read our blogs Why do Tech Companies not Hire recent Computer Science Graduates | SynergisticIT What Recruiters Look for in Junior Developers | SynergisticIT Software engineering or Data Science as a career? How OPT Students Can Land Tech Jobs – SynergisticIT Why programs don’t fix gaps Many candidates with gaps try “one more course,” but that rarely changes outcomes. Ideal candidates for gap-to-offer support Professionals returning after layoffs or personal reasons Candidates with limited recent experience but strong potential Recent grads who never launched properly International candidates on F1/OPT with timeline pressure SynergisticIT provides guidance around STEM extension and process support for H-1B/Green Card filing once employed (as applicable through employers). Want to see credibility and event participation? If you want to explore here are the key links: Event videos (OCW, JavaOne, Gartner): USA Today feature Discover JOPP: Job Placement Program Contact Us A gap isn’t the end of your career. It’s a chapter—and you can write the next one strategically. Please note: Resume databases are shared with clients and interested clients will reach out directly if they find a qualified candidate for their req. Resume submissions may be shared with our JOPP team database also. Please unsubscribe if contacted or if you don’t want to be contacted please don’t submit your resume. Work with java based application Perform application development for custom applications Designing and developing for enterprise class application using java technologies Enhancing existing java web applications Integrate application business layer with external application components Provide production support web applications Implement innovative web/software development technologies Using a variety of java based technologies Augment the application development team Manage the application development team Develop mobile applications and application interfaces Do analysis, design and hands on java development Develop software applications in client/server environment and/or web deployed applications Understand application requirements and develop software solutions Conduct testing on other developer's code Supporting an enterprise business application Develop web services components for cross-application solutions Implement complex web and database applications Develop and maintain web applications using C, (WPF, MVC, WCF, ASP) Develop components of multitier web application

ENTERPRISE RISK GOVERNANCE PROGRAM MANAGER WHAT IS THE OPPORTUNITY?Under direction of the SVP, Enterprise Change Risk Management and Product Risk Oversight this position supports the second Line of Defense Enterprise Risk function and assists with the managing the portfolios within Change Risk and Product Risk Management. The Enterprise Risk Program Manager is responsible for providing advisory and oversight for Change Risk and Product Risk, with a particular focus on strengthening risk assessments, reporting and governance efforts to support decision-making. This position provides an excellent opportunity to strengthen adherence to the risk management framework, which includes risk identification and assessment; risk measurement; risk controls; and risk monitoring and reporting to improve change and product risk outcomes. WHAT WILL YOU DO? • Assist in maintaining the Enterprise Change Risk Management Framework and Product framework, Policy, Standards, and second line of defense Procedures annual review and refresh process., • Work collaboratively with assigned business or corporate unit(s) to embed an understanding of the Change Risk and Product Risk, • Review, challenge and monitor 1LOD change risk and product risk assessments, and alignment with risk appetite, • Review and challenge practices against CNB enterprise risk framework and policies, including but not limited to CNB Client Product and Suitability Policy, and Enterprise Change Risk Management Policy, Risk and Control Self Assessments (RCSA’s), Key Risk Indicators (KRI’s), Operational Risk Events (ORE) reporting, and issue resolution, • Understand material existing and emerging risks which align with assigned business or corporate unit(s) to ensure operation within risk appetite and fair representation of the operational risk profile for Product and Change Risk, • Review and challenge whether 1LOD strategic priorities and new product offerings sufficiently consider change and product risk when applicable and whether the risks have been adequately assessed across all strategic priorities, • Provide advisory, oversight, and challenge to 1LOD development and implementation of business processes, procedures, and controls to adhere to change and product risk governance and policy requirements, • Review and challenge 1LOD risk acceptances and new business initiatives, • Credibly challenge 1LOD risk monitoring and reporting and related protocols, in conjunction with risk type teams, including metric trigger explanations and associated action plans, • Review and challenge 1LOD control testing and monitoring plans, the adequacy of control management activities and assessment results, and risk mitigation strategies to address gaps in control design or operating effectiveness for product and change risk management, • Review and challenge regulatory remediation activities in assigned coverage areas to ensure product and change risk exposures associated with known control deficiencies are addressed. This includes providing oversight and challenge during the Issue Management Lifecycle, which may include issue details; root cause analysis; action plan; material issue changes; management’s completion of the required and/or committed corrective actions with supporting evidence; control management activities; and sustainability., • Review and challenge self-identified issues and escalation in assigned coverage areas, including challenge of issue ratings, corrective action plans, due date extensions, and thematic issues in accordance with the CNB Issue Management Policy, • Influence and monitor progress of action plans to improve the risk and control environment arising from risk assessments, risk monitoring, internal and external events, and regulatory exams, • Exhibit high attention to details in identifying, aggregating, and communicating issues and control gaps to appropriate stakeholders, • Lead with the preparation of status reports, key metrics and other Change and Product Risk reporting information as requested by management, the Risk Committee or RBC., • Contribute to ad-hoc assignments/special projects, • Maintain awareness of current regulatory/industry trends impacting the Bank’s enterprise risk management program or practices., • Maintain familiarity of, and technical expertise with, business unit(s) organizational structure, personnel, activities and products, new product development, financial performance, and risk and problem areas, • Support and facilitate audit and regulatory exam activities related to Product and Change Risk, • Build effective relationships, alliances, and strategic partnerships across CNB and RBC to help deliver results and to ensure opportunities are identified, analyzed, and managed appropriately. Understand interdependencies to achieve success., • Provide guidance to colleagues on the application of the ECM Framework, Policy, Standards, and Procedures, including but not limited to providing training, communication, and intranet resources., • Maintain training and communication around ECM Framework, Policy, and Standards through the bank’s required learning system; and 2LOD procedures to raise awareness and educate impacted colleagues on requirements. WHAT DO YOU NEED TO SUCCEED?Required Qualifications* • Bachelor's Degree or equivalent, • Minimum 5 years of risk management, change risk management , product risk management and governance experience., • Minimum 5 years of banking or financial industry experience., • Minimum 5 years of project or program management experience. Additional Qualifications, • Strong understanding of three lines of defense risk management structure and requirements, • Strong understanding of Risk Management/Operational Risk Management/Change Risk and/or Product Risk, • Strong knowledge of internal control management practices and testing methodology with proven experience in controls management design and/or execution, • Strong knowledge of issue management practices with proven experience in issue resolution, • Ability to handle complexity and ambiguity, • Ability to deal effectively with conflict, • Well-developed influencing skills, • Demonstrated ability to think critically and facilitate change through collaborative effort., • Self-motivation, discipline, task focus, the ability to structure and present work and a proven record of delivering high quality results within strict deadlines., • Ability to work in a matrix environment, • Strong computer skills with knowledge in basic software programs like Microsoft Word, Excel, and PowerPoint., • Must have functional knowledge of SharePoint., • Understanding of banking industry and the client expectations that constitute premier client service., • Possess superior organizational, verbal, and written communication and presentation skills., • Must be able to convey complex concepts in a clear and concise manner., • Strong interpersonal/teamwork skills with the ability to effectively communicate and interact professionally with all levels of individuals including executive management, both internally to CNB and externally to the community and public., • Possess the ability to work on several projects simultaneously and meet deadlines, specifically have the ability to multitask and prioritize several concurrent initiatives, • Ability to work with a cross-functional stakeholder group., • Ability to effectively communicate with stakeholders, project members, and partners., • Extremely organized with strong time-management skills., • Detail oriented, analytical, and inquisitive., • Comprehensive healthcare coverage, including Medical, Dental and Vision plans, available the first of the month following start date, • Generous 401(k) company matching contribution, • Career Development through Tuition Reimbursement and other internal upskilling and training resources, • Valued Time Away benefits including vacation, sick and volunteer time, • Specialized health and family planning benefits including fertility benefits, and cancer, diabetes and musculoskeletal support programs, • Career Mobility support from a dedicated recruitment team It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. *Represents basic qualifications for the position. To be considered for this position, you must at least meet the required qualifications. careers.cnb.com accepts applications on an ongoing basis, until filled. Unless otherwise indicated as fully remote, reporting into a designated City National location is an essential function of the job.

A medical billing and coding specialist processes and codes healthcare claims to ensure accurate billing and insurance reimbursement, supporting the financial operations of healthcare facilities. Looking to start a rewarding career path in the healthcare industry? Use Dreambound to find a Medical Bi