Cmm jobs in Newark, New JerseyCreate job alerts

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Responsibilities: • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation, • Process warehouse materials, • Rely on instructions and pre-established guidelines/procedures to perform the functions of the job, • Support positive corrective actions and identification of root cause, • Other duties as assigned.Required Skills, • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • MS Outlook, and EXCEL experience, • Experience with hand measurement gages, conduct conventional inspection to engineering requirements, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Valid drivers license and auto insurance required.Additional Desired Skills:, • Prior practical experience and implementation of Quality inspection tools and equipment., • Experience in RCCA, and problem solvingGeneral Requirements, • Ability to handle complex situations and solve complex problems, • Ability to work effectively under pressure to meet deadlines, • Ability to press and analyze technical and business information, • Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers, • Ability to remain seated for up to 5 hours at a time, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Must be able to simultaneously manage several objectives, • Must be detail oriented, organized, and self-motivatedAdditional Qualifications (Preferred):, • 3+ years’ experience as a quality inspector or technician., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Office products, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. • Valid Driver’s License, • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.70/mile 2024) when driving personal vehicles on company business, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR 87TEEMFWQL

Job DescriptionIMS Recruiting is seeking a First Article Inspection (FAI) Specialist for a leading aerospace manufacturer. This role is critical to ensuring compliance with AS9102 standards and supporting manufacturing excellence. The FAI Specialist will be responsible for performing and documenting first article inspections, collaborating with cross-functional teams, and driving quality assurance in line with aerospace industry requirements.About the Role The FAI Specialist will play a key part in ensuring aerospace components and assemblies meet customer and regulatory specifications, while supporting audits, continuous improvement, and quality initiatives. Key Responsibilities * Perform First Article Inspections (FAIs) on aerospace components and assemblies in accordance with AS9102 Rev. C. * Create, review, and maintain FAI reports (Form 1, Form 2, Form 3). * Collaborate with manufacturing, engineering, and suppliers to resolve discrepancies and gather documentation. * Interpret engineering drawings, CAD models, and technical data packages (GD&T, ASME Y14.5). * Use precision measuring tools (calipers, micrometers, CMMs, etc.) to verify dimensional conformance. * Record/document non-conformances and support root cause analysis and corrective actions. * Ensure traceability of materials, special processes, and certifications. * Support audits (internal, customer, regulatory) with FAI documentation. * Submit completed FAI packages to customers via Net-Inspect. Qualifications Required: * High school diploma or GED (Associate’s or technical degree preferred). * 1–2+ years of FAI or Quality Assurance experience in aerospace or defense. * Strong knowledge of AS9102 Rev. C and aerospace quality standards. * Proficiency in reading/interpreting engineering drawings and GD&T. * Skilled with inspection tools (calipers, micrometers, CMMs, etc.). * Experience with CMM software (PC-DMIS, Zeiss Calypso, etc.) is a plus. * Proficiency in MS Office and FAI tools (Net-Inspect, InspectionXpert). * Strong attention to detail and documentation accuracy. Preferred: * Experience in AS9100D-certified environments. * Knowledge of special processes (anodizing, NDT, welding, heat treat). * Understanding of supplier quality and PPAP/FAI submissions. * Certifications in Six Sigma, Lean, or Quality (CQI, CQT). Why Join? * Work with a mission-critical aerospace supplier ensuring compliance and quality excellence. * Opportunity to grow in aerospace quality assurance and gain exposure to AS9100/AS9102 best practices. * Competitive compensation and full benefits package.

Job Description Join a Leader in Precision Engineering Valcor Engineering is a trusted name in aerospace, nuclear, and defense sectors. As one of the largest providers of fluid control products, our legacy is built on precision, reliability, and innovation. We're currently looking for a Mechanical Inspector to join our quality team. If you have a mechanical mindset, strong attention to detail, and enjoy working in a hands-on environment—this is the role for you! Under general supervision, the Inspector position requires the mechanical ability to perform first piece and sample inspection. Using standard inspection equipment, solves standard inspection problems and lays out of complicated parts, casting, and assemblies. Makes decisions concerning minor inspection problems, using complicated blueprints and specifications. ESSENTIAL FUNCTIONS • Read and Comprehend complicated blueprints, sketches, written and/or verbal specifications., • Proficient in the use of mechanical inspection equipment; including micrometers, gages, go/no gages, optical comparator, CMM and other inspection measuring tools., • Accurately document the results of the inspections and other data., • May be Level I Operator or Level II Inspector in one or more liquid penetrant, ultra-sonic or eddy currents., • Under direct supervision, may assist in the calibrating of gauges., • Moves parts and materials to and from work area., • Must pass required eye tests, and will be subject to the random drug and alcohol testing program., • Follow company policies (Safety, Attendance, etc.), and maintains a clean well-organized work area., • Can easily accept direction and complete tasks in a timely manner with minimal supervision., • Requires a high school diploma or equivalent, advanced technical education preferred., • Inspection experience and working knowledge of measurement instruments required., • Aerospace and or Nuclear industry experience beneficial., • Good written/verbal communication skills and Inter-acts with organizational team members and other departments in a professional manner., • Advanced mechanical aptitude desired. Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy. * Team-Focused Culture: Work with a skilled, collaborative group of industry pros. * Career Growth: Opportunities to develop and move up in a growing company. * Comprehensive Benefits: Competitive pay, healthcare, 401(k), paid time off, and more. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description FSQA Manager – Food Manufacturing (Greater NYC Area) $85,000–$105,000 + full benefits | On-site | Full-time We’re looking for a hands-on FSQA Manager to lead food safety and quality assurance at a manufacturing facility in the Greater New York City area. This is a plant-based role with full responsibility for the site’s food safety programs, audits, and team leadership. What You’ll Do * Lead all FSQA programs in compliance with FDA and ISO standards * Oversee HACCP documentation, updates, and execution * Conduct internal audits and manage external inspection readiness * Train, mentor, and develop a team of QA technicians * Use tools like micrometers and CMMs to verify product conformance * Analyze QA data to drive corrective actions and improvements * Collaborate with production and leadership teams to uphold product quality What You Bring * 4+ years of food QA experience with leadership responsibility * Bachelor's Degree REQUIRED * HACCP and SQF Certified REQUIRED * Skilled in measuring tools (micrometers, CMM); Calypso software a plus * Strong communication, training, and audit prep skills * Comfortable with hands-on quality and documentation work on the plant floor Schedule & Pay * Full-time, on-site role (Monday to Friday with occasional weekend support) * Pay range: $85,000–$105,000 depending on experience Benefits * Medical, dental, vision insurance * 401(k) + company match * HSA/FSA options * Paid time off & holidays * Life insurance and EAP * Employee discounts * Professional development support This role is ideal for a QA professional looking to take full ownership of site food safety and quality, with the support of a collaborative plant team. You should be proficient in: • Bachelor's Degree, • Food Safety and Quality Assurance (FSQA)

Job Description Department: Quality Location: PTI Tech, Clifton NJ Reports To: Director of Quality Mission To uphold and advance the highest standards of quality across all stages of manufacturing—ensuring compliance with AS9100 and customer-specific requirements through robust documentation, risk management, and process validation. This role exists to proactively prevent quality issues, support internal and customer-facing investigations, and strengthen PTI’s reputation as a trusted partner for mission-critical components. Competencies – What This Person Must Be Standards-Driven: Understands and applies AS9100, ISO 9001, MIL-STD-1916 and customer-specific standards; ensures audits, validations, and ongoing operations meet all requirements. Root Cause Problem Solver: Leads investigations using 8D, 5 Whys, and Ishikawa methods to ensure sustainable corrective actions. Process Control Advocate: Uses SPC, PFMEA, control plans, and capability studies to ensure consistent, capable production. Metrics-Driven: Uses data analysis to monitor trends, reduce scrap, and eliminate recurrence of quality issues. Customer-Focused: Communicates clearly with aerospace, defense, and other high-stakes clients; drives issues to closure and delivers timely updates. Cross-Functional Collaborator: Partners with Engineering, Manufacturing, and Production teams to align on requirements, validate processes, and resolve issues quickly. Detail-Oriented: Manages documentation and compliance requirements with accuracy including FAIRs, PPAPs, CAPA records, SOPs, and quality alerts with full traceability. Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability. Key Responsibilities • Drive quality improvements through Gage R&R studies, Statistical Process Control (SPC), Six Sigma, and Lean Manufacturing tools., • Lead investigations into internal and external quality issues; document findings and ensure timely resolution., • Perform root cause analysis using structured problem-solving methods (8D, 5 Whys) and verify the effectiveness of corrective and preventive actions (CAPA)., • Coordinate timely responses to Supplier Corrective Action Requests (SCAR), Non-Conformance Reports (NCR), customer complaints, and quality-related queries., • Prepare and maintain First Article Inspection Reports (AS9102), Production Part Approval Process (PPAP-AS9145) documentation, and validation (IQ/OQ/PQ)., • Lead risk assessments (PFMEA) and develop control plans to mitigate quality risks., • Track and analyze defects and scrap data to identify trends and prioritize corrective actions., • Collaborate with manufacturing and engineering to improve processes and define inspection criteria., • Own inspection processes, including CMM (Zeiss – Calypso), OGP, and Keyence programming, as well as inspection fixture design (SolidWorks preferred)., • Oversee QC personnel training in partnership with manufacturing engineering to establish visual standards and develop work instructions., • Maintain SOPs, work instructions, inspection procedures, and training logs in compliance with AS9100., • ≥ 98% Quality Shipments, • ≥ 90% Gage R&R Pass Rate, • ≥ 1.33 Cpk for Stable Processes, • ≤ 3% Internal Scrap Rate on assigned processes, • ≥ 95% CAPA Effectiveness, • ≥ 95% On-Time Submission of FAIRs, PPAPs, SCAR’s, and CAPA’s, • Bachelor’s degree in Mechanical, Manufacturing, or a related Engineering field, • 3–5+ years of quality engineering experience in injection molding or precision manufacturing, • Working knowledge of AS9100, ISO 9001, and MIL-STD-1916, • Experience with FAIR, PPAP, SPC, PFMEA, control plans, and CAD (SolidWorks preferred), • Proficiency in statistical tools (Minitab, JMP, Excel) and QMS/ERP systems, • ASQ Certified Quality Engineer (CQE) or Six Sigma certification, • Experience in the defense, aerospace, or medical device industries, • Hands-on inspection experience, including CMM, optical, or non-contact methods, • Ability to stand and walk on the production floor for extended periods, • Capable of lifting up to 40 lbs and accessing production and inspection equipment, • Manual dexterity for handling tools, parts, and inspection equipment, • Visual acuity sufficient to read prints, inspect parts, and identify quality defects, • Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations, • Requires use of PPE, including safety glasses, gloves, and hearing protection, • Frequent collaboration with production, maintenance, and engineering teams on the floorCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionSenior Quality Engineer Senior Quality Engineer Salary: $110k - $140k base, Benefits, PTO, 401K Requirements: GD&T experience within Aerospace/Defense. Nadcap preferred. Position Overview For nearly 100 years, we have been manufacturing high-precision and geometrically complex parts in the Aerospace industry. Due to growth we are actively hiring Senior and Mid-level Quality Engineers. Key Responsibilities • Develop and implement quality control processes to ensure compliance with AS9100, ISO 9001, and other relevant standards., • Conduct quality audits and assessments to identify areas for improvement and ensure adherence to quality standards., • Analyze data from inspections and tests to identify trends and implement corrective actions as necessary., • Work with engineering and production teams to design and improve processes that enhance product quality., • Lead and mentor junior quality engineers and quality technicians in best practices and quality methodologies., • Utilize GD&T and metrology techniques to ensure accurate product specifications and tolerances., • Oversee non-destructive testing (NDT) processes to ensure product integrity and compliance with industry regulations., • Bachelor's degree in Engineering or a related field., • 5+ years of experience in quality engineering, preferably in the aerospace or defense industries., • Strong knowledge of GD&T, AS9012, AS9100, ISO 9001, and related quality standards., • Experience with APQP, PAPP, CMM, RCCM, and NADCAP requirements., • Familiarity with non-destructive testing methods and metallurgical inspection processes., • Proficient in using quality tools and methodologies, including statistical process control and root cause analysis., • Excellent problem-solving skills and attention to detail., • Health, Dental, and Vision insurance, • PTO, • 401K with match, • Bonus - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/09/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionBenefits: • 401(k), • Health insurance Position Summary: A well-established precision manufacturer in the aerospace and defense sector is seeking a Director of Quality to lead its quality management systems across casting, machining, and assembly operations. This leadership role is critical to ensuring compliance with industry regulations, driving continuous improvement, and maintaining the highest standards of quality in production. Key Responsibilities: • Develop, implement, and maintain a robust Quality Management System (QMS) aligned with AS9100, ISO 9001, and Nadcap standards., • Lead internal and external audits, customer quality interactions, and regulatory compliance initiatives., • Oversee dimensional and metallurgical inspection processes, including CMM, GD&T, and non-destructive testing., • Drive root cause analysis and implement corrective and preventive actions (RCCM, 8D, CAPA)., • Manage all First Article Inspection (FAI) and PPAP/APQP activities, including documentation under AS9012 and AS13002., • Collaborate with cross-functional teams (engineering, operations, supply chain) to improve process capability and product quality., • Analyze quality KPIs and initiate continuous improvement programs to reduce scrap, rework, and customer complaints., • Mentor and develop a high-performing team of quality engineers, inspectors, and technicians., • Role is on-site and not eligible for remote work.Qualifications:, • Bachelors degree in Engineering or a related technical field required; advanced degree a plus., • Minimum of 10 years of progressive quality leadership experience in aerospace, defense, or high-precision manufacturing., • Extensive knowledge of quality standards and regulatory frameworks: AS9100, ISO 9001, Nadcap, ITAR., • Experience managing audits and customer approvals (e.g., Boeing, Lockheed, Raytheon, Honeywell)., • Strong background in metrology, GD&T, and non-destructive testing., • Familiar with lean manufacturing, Six Sigma methodologies, and ERP systems.

Job Description CNC Programmer - Climate controlled environment Our client is seeking an experienced CNC programmer to create CNC programs for a variety of production and prototype parts. The ideal person should know CNC machining processes, fixturing, CNC cutting tools, and Gibbs Cam software (Solidworks /Mastercam). Essential Duties and Responsibilities: • Operate CNC lathe or mill, • Create and edit CNC programs and setup sheets for processing parts on vertical and horizontal CNC machining centers., • Design project fixturing and plan cutting tool sequence to process parts efficiently, • Support setup and operator machinist to produce quality parts., • Provide feedback to design engineers to produce manufacturable designs and drawings., • Research new technology in CNC cutting tools, machining fixtures, and effective operation sequences to reduce part costs and cycle times., • Experience in mill CNC machine tool programming and setup, • Understanding of G code editing and troubleshooting. Creating and editing macros is a plus, • Strong technical knowledge of current CNC machining cutting tools and calculating feeds and speeds, • Ability to interpret engineering drawings with geometric dimensioning and tolerancing (GD&T), • Experience with the machining of castings, • Experience using Gibbs Cam, • Programming experience using a coordinate measurement Machine (CMM) is a plus, • Good verbal and written communication skills in English., • Competent using Microsoft Office (Outlook, Excel, Word,) Company DescriptionNJMEP is a private, not-for-profit organization that improves the profitability and competitiveness of New Jersey’s manufacturers.NJMEP is a private, not-for-profit organization that improves the profitability and competitiveness of New Jersey’s manufacturers.

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Proficient use of all shop inspection equipment, including but not limited to, CMM, comparator, digital height gages, micrometers, etc., • Moderate physical activity. The job location is at 2 Lawrence Road, Springfield, NJ 07081 We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Moderate physical activity. Salary Range:$33.63 To $48.57 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

MUST HAVE RELEVANT EXPERIENCE TO THIS POSITION!!!!! IF YOU DO NOT HAVE EXPERIENCE WITHIN THIS POSITION OR FIELD, DO NOT APPLY!!.In this role, you'll use your technical expertise to program and operate Coordinate Measuring Machines (CMMs) to ensure our precision parts meet exact specifications.Progra

JOB SUMMARY Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists' hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used. \n\n, • Must be able to skillfully use all machinist's hand tools and measuring instruments. \n, • Must be familiar with the machining of most materials. \n, • Must be able to use advanced shop math, including trigonometry.\n, • May be required to assign work to lower level machinists.\n, • Moves parts to and from the work area.\n, • Maintains good housekeeping in the work area.\n, • Meets all safety requirements in the machine shop and follows all company policies. \n, • Requires a High school diploma or equivalent education\n, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist.\n, • Ability to operate standard and specialized equipment to produce prototype and/or production parts\n, • Ability to perform standard shop computations, using technical math, geometry and trigonometry. \n, • In-depth knowledge of geometric dimensions and tolerances in both standard and metric systems\n, • Proficient use of set up and operation of CNC machining center.\n, • Proficient use of tool and surface grinders\n, • Moderate physical activity. \n Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics.

MUST HAVE RELEVANT EXPERIENCE TO THIS POSITION!!!!! IF YOU DO NOT HAVE EXPERIENCE WITHIN THIS POSITION OR FIELD, DO NOT APPLY!!.We’re looking for a skilled.In this role, you’ll use your technical expertise to program and operate Coordinate Measuring Machines (CMMs) to ensure our precisio

Job DescriptionDescription: Position: Assistant Resident Engineer_Bridge Construction Projects in New York City Reports to: Project Manager KSE is a mid-size construction management and engineering firm ranking in the ENR Top 100 for CM and ENR Top 500 for design services. With seven offices across four states (NY, NJ, PA and CT), the firm has been providing transportation and public infrastructure construction services for more than three and half decades. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Technical Responsibilities: Assist the Resident Engineer and Project Manager with the following duties: • Manage daily field inspection activities in accordance with NYCDOT standards, procedures, and project specifications., • Assist the Resident Engineer in administering construction contracts on NYCDOT bridge projects., • Attend and coordinate contractor progress meetings and prepare related documentation., • Review and respond to contractor Requests for Information (RFIs), submittals, and shop drawings with input from design staff, ensuring NYCDOT compliance., • Verify that all work is performed in accordance with NYCDOT-approved Work Zone Traffic Control (WZTC) plans and maintenance and protection of traffic (MPT) standards., • Conduct field inspections to verify materials, workmanship, and progress conform to NYCDOT contract requirements., • Prepare daily inspection reports, Resident Engineer diaries, and monthly progress reports for submittal to NYCDOT., • Monitor contractor schedules and track progress against project milestones., • Assist in the processing of change orders, contractor payments, punch lists, and project close-out documentation in accordance with NYCDOT procedures., • Coordinate field activities with NYCDOT Bridge Inspection Units, Office of Construction Mitigation and Coordination (OCMC), and other city agencies., • Ensure adherence to safety protocols per NYCDOT, OSHA, and site-specific safety plans., • Maintain project documentation in accordance with NYCDOT Construction Management Manual (CMM) and auditing standards., • Engage with community boards, elected officials, and the public, supporting NYCDOT outreach and communication efforts., • Respond promptly to NYCDOT and KSE management requests or concerns. Educational Qualifications/Professional Licenses • BS or MS in Civil Engineering or related field from ABET accredited school., • Professional Engineer (P.E.) License in New York State required., • OSHA 10 Safety Awareness Training certificate., • 5-10 years of relevant experience in construction inspection or management of infrastructure construction projects., • At least 3 – 5+ years as a construction inspector or chief inspector on NYSDOT or NYCDOT major bridge projects., • Prior experience in the reconstruction/rehabilitation of roadways and highways, utility work, as well as installation and replacement of sewers and water mains., • Prior experience with NYCDOT preferred. General Qualities: • Strong written and oral communication skills to lead the construction inspection staff., • Proactive self-starter capable of setting a positive example for the staff., • Provides technical and management support to the Department Manager/Regional Manager/Project Manager., • Has full technical and administrative responsibility for interpreting, organizing, executing, and coordinating projects/assignments., • Manages a major complex project and/or several routines/fewer complex projects. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.