Trabajos commissioning engineer en Passaic, New JerseyCrear alertas

Job Description About Legacy Construction Management Legacy Construction Management, Inc. is a New Jersey-based construction management firm specializing in public sector work, primarily K-12 school construction and municipal building projects across Essex, Somerset, Passaic, and Union Counties. We serve as Owner's Representatives, embedded on-site with our clients to protect their interests from groundbreaking through closeout. Our team operates with a direct, hands-on approach, and every Project Manager we hire carries real responsibility from day one. The Role We are hiring multiple full-time, on-site Project Managers to serve as Owner's Representatives on active public building construction projects. Each PM is assigned to a single client and functions as that client's primary point of contact with the construction team, the architect, and all project stakeholders. This is a field-based role. You will be on-site daily, observing work in progress, enforcing contract compliance, and keeping projects on schedule and within budget. You will not be managing from an office. Day-to-Day Responsibilities • Observe contractor work daily to verify compliance with contract documents, plans, and specifications, • Serve as the Owner's on-site representative in all project meetings, including OAC meetings, progress meetings, and subcontractor coordination meetings, • Facilitate communication between the Owner, architect, engineer of record, general contractor, and subcontractors, • Review submittals, RFIs, and change order requests for completeness and contract compliance, and coordinate timely review by the architect, • Maintain organized and current project records, including meeting minutes, correspondence logs, inspection reports, and punchlist documentation, • Track project schedule and budget against baseline; identify deviations early and escalate with supporting documentation, • Provide regular written progress reports to the Owner and Legacy principals, • Bachelor's degree in construction management, engineering, or architecture preferred; candidates without a degree but with substantial equivalent field experience as a Construction Project Manager will be considered, • 10 years of project management experience on public building construction projects with contract values of $15 million or more preferred, • Direct experience with general construction and HVAC systems strongly preferred, • Proficiency with MS Office; experience with project management software is a plus, • Strong written and verbal communication skills; ability to manage relationships with owners, design professionals, and contractors simultaneously, • Demonstrated ability to read and interpret construction documents, track submittals and RFIs, and manage change order documentation, • Salary: $90,000 – $100,000 per year, commensurate with experience, • Health insurance, • Retirement plan Submit your resume to [application link or email]. Legacy Construction Management is an equal opportunity employer.

Job description: Our client is seeking an experienced and technically proficient Plant Engineer to support its Secaucus, New Jersey facility. This individual will play a key role in ensuring the reliability, efficiency, and continuous improvement of plant operations, with a strong emphasis on automation, controls engineering, and maintenance management. The Plant Engineer will be responsible for implementing and sustaining automation technologies, supporting high-speed packaging operations, coordinating engineering projects, and partnering closely with maintenance and production teams to achieve performance, safety, and quality objectives. Essential Duties & ResponsibilitiesAutomation & Controls Engineering: • Develop, maintain, and optimize control systems to support production and packaging operations., • Program and troubleshoot Allen-Bradley PLCs, including RSLogix 5000 / Studio 5000., • Support, configure, and enhance FactoryTalk HMI/SCADA platforms., • Analyze system performance and implement improvements to enhance operational reliability., • Provide technical support for equipment commissioning, upgrades, and automation projects. Maintenance & Operational Support: • Provide advanced technical expertise to maintenance personnel in diagnosing and correcting electrical, mechanical, and controls-related issues., • Support preventive and predictive maintenance programs to improve equipment uptime and reduce unplanned downtime., • Participate in root cause analyses and develop sustainable corrective actions. Project Management: • Manage engineering and automation projects from concept through implementation, including scoping, budgeting, planning, and execution., • Coordinate with internal stakeholders, contractors, and vendors to ensure timely project completion., • Maintain proper documentation and ensure compliance with corporate, regulatory, and safety requirements. Systems, Data, and Technology Integration: • Utilize SQL to extract data, analyze trends, and support system integrations., • Experience with Ignition SCADA is considered a strong asset., • Support data-driven decision-making and digital transformation initiatives within the facility. Compliance & Safety: • Ensure adherence to all food safety, OSHA, regulatory, and company standards., • Support audits, documentation reviews, and engineering change management processes., • Promote and maintain a safe working environment through proactive risk assessments and compliance efforts. Qualifications: • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or a related technical discipline, • Minimum of 5 years of experience in automation, plant engineering, or manufacturing engineering, • Proficiency with PLC programming (Allen-Bradley / RSLogix 5000 / Studio 5000), • Experience with Rockwell FactoryTalk HMI/SCADA systems, • Demonstrated experience in maintenance management or supporting maintenance operations, • Strong communication skills (written and verbal) with the ability to partner effectively across departments, • Proven ability to lead and manage engineering projects Preferred Qualifications: • Experience in food manufacturing or regulated production environments, • Knowledge of high-speed packaging equipment, • Experience working with SQL databases, • Exposure to Ignition SCADA platforms, • Familiarity with Lean Manufacturing, Six Sigma, or similar continuous improvement methodologies

Our client is currently seeking a Plant Engineer Position Overview The Plant Engineer will be responsible for implementing and sustaining automation technologies, supporting high-speed packaging operations, coordinating engineering projects, and partnering closely with maintenance and production teams to achieve performance, safety, and quality objectives. Essential Duties & Responsibilities Automation & Controls Engineering • Develop, maintain, and optimize controls systems to support production and packaging operations., • Program and troubleshoot Allen-Bradley PLCs, including RSLogix 5000 / Studio 5000., • Support, configure, and enhance FactoryTalk HMI/SCADA platforms., • Analyze system performance and implement control system improvements to enhance operational reliability., • Provide technical support for equipment commissioning, upgrades, and automation projects. Maintenance & Operational Support • Provide advanced technical expertise to maintenance personnel in diagnosing and correcting electrical, mechanical, and controls-related issues., • Support preventive and predictive maintenance programs to improve equipment uptime and reduce unplanned downtime., • Participate in root cause analyses and develop sustainable corrective actions. Project Management • Manage engineering and automation projects from concept through implementation, including scoping, budgeting, planning, and execution., • Coordinate with internal stakeholders, contractors, and vendors to ensure timely project completion., • Maintain proper documentation and ensure compliance with corporate, regulatory, and safety requirements. Systems, Data, and Technology Integration • Utilize SQL to extract data, analyze trends, and support system integrations., • Experience with Ignition SCADA is considered a strong asset., • Support data-driven decision-making and digital transformation initiatives within the facility. Compliance & Safety • Ensure adherence to all food safety, OSHA, regulatory, and company standards., • Support audits, documentation reviews, and engineering change management processes., • Promote and maintain a safe working environment through proactive risk assessments and compliance efforts. Required Qualifications • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or a related technical discipline., • Minimum of 5 years of experience in automation, plant engineering, or manufacturing engineering., • Proficiency with PLC programming (Allen-Bradley / RSLogix 5000 / Studio 5000)., • Experience with Rockwell FactoryTalk HMI/SCADA systems., • Demonstrated experience in maintenance management or supporting maintenance operations., • Strong communication skills (written and verbal) with the ability to partner effectively across departments., • Proven ability to lead and manage engineering projects. Preferred Qualifications • Experience in food manufacturing or regulated production environments., • Knowledge of high-speed packaging equipment., • Experience working with SQL databases., • Exposure to Ignition SCADA platforms., • Familiarity with Lean Manufacturing, Six Sigma, or similar continuous improvement methodologies. Key Competencies • Strong analytical, diagnostic, and problem‑solving skills, • Detail-oriented with a hands-on approach, • Ability to manage multiple priorities effectively, • Strong leadership and cross-functional collaboration skills, • Commitment to safety, quality, and operational excellence

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview: The Staff Engineer, Design is primarily responsible for designing and developing new production equipment and tooling to support manufacturing needs, including cost reduction, ergonomic improvements, quality enhancements, and new product introductions. Following equipment deployment, the engineer supports validation activities and assists maintenance/manufacturing teams when validation or maintenance findings require design modifications. This role ensures that equipment designs are robust, well-documented, and compliant with applicable medical device regulations. Job Responsibilities and Essential Duties • Design and develop new production equipment, tooling, jigs, and fixtures that improve manufacturability, efficiency, ergonomics, and quality., • Create detailed SolidWorks CAD models, engineering drawings, and specifications for internal fabrication or external vendor manufacturing., • Lead equipment reviews and incorporate feedback from manufacturing engineering, maintenance, and production operators., • Work with external suppliers and fabrication shops to communicate design intent, resolve build issues, and verify component quality., • Ensure all equipment designs comply with internal engineering standards, safety requirements, and medical device regulations., • Support Manufacturing Engineering and Maintenance teams during equipment validation , installation, and troubleshooting., • Implement and document equipment design modifications based on validation outcomes or equipment performance issues., • Provide updated drawings, documentation, and bills of materials when equipment changes are made., • Assist in preparing capital expenditure documentation for new equipment, including engineering rationale, cost analysis, and recommendations., • Make informed engineering decisions based on analysis, testing, and validated data., • Work independently while collaborating with cross-functional teams. Minimum Requirements • Bachelor's degree in Engineering (Mechanical Engineering preferred) or related technical discipline., • 8+ years of experience in equipment or tooling design within a manufacturing environment (medical device preferred)., • Proficiency in SolidWorks including part/assembly modeling, and drafting., • Hands-on experience with prototype builds, mechanical troubleshooting, and equipment commissioning., • Strong understanding of mechanical systems, pneumatics, electromechanical integration, and manufacturing methods., • Ability to generate and revise engineering drawings, BOMs, and technical documentation., • Excellent communication, collaboration, and timemanagement skills. Required Knowledge, Skills and Abilities • Strong mechanical design and engineering analysis skills., • Understanding of validation concepts (IQ/OQ/PQ) in a regulated environment., • High proficiency in CAD and supporting engineering software (Excel, Word, PDM, etc.)., • Ability to communicate effectively with operators, technicians, engineers, vendors, and management., • Strong problem-solving skills with a focus on robust design solutions. Targeted salary range: $115,000- $135,000, depending upon experience and location +10% bonus target #LI-LG1 About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Job Description Resource Innovations is seeking a Lead Engineer to support and grow an energy efficiency program that delivers highly technical, whole-building solutions across both multifamily and commercial/industrial systems. While the program includes multifamily buildings, the work extends well beyond traditional residential scope and includes complex building systems, advanced controls strategies, custom energy calculations, and energy management. This role provides an opportunity to: • Lead technically complex projects from prescriptive through fully custom solutions, • Serve as a technical authority for both internal teams and external stakeholders Duties and Responsibilities • Technical Leadership & Project Delivery, • Lead and support the delivery of multifamily and C&I energy efficiency projects, including:, • Custom projects, • Energy Management, • Prescriptive, • Perform deep technical analysis across building systems, including HVAC, BAS/controls, lighting, and other complex systems, • Develop and review custom energy calculations, engineering models, and savings methodologies, • Engineering & Analysis, • Conduct energy audits and system assessments across multifamily and commercial facilities, • Develop project scopes and perform:, • BIN/hourly analysis, • Economic and lifecycle cost analysis, • Lead or support measurement & verification (M&V) activities, including:, • Site inspections, • Trend data analysis, • Functional performance testing, • Field verification, • Client & Program Interface, • Serve as a technical lead and liaison with utilities, program administrators, trade allies, and customers, • Provide guidance on:, • Measure eligibility, • Savings methodologies, • Program strategy and optimization, • Identify program and process gaps and recommend practical, scalable solutions, • Team Leadership (as applicable), • Mentor and support junior engineers and technical reviewers, • Provide technical QA/QC oversight to ensure consistency and quality across projects, • Support training, onboarding, and development of engineering staff, • Must reside in or be willing to relocate to the State of New Jersey, • Bachelor’s degree in Mechanical Engineering, Energy Engineering, or related field, • 5+ years of experience in energy efficiency, commissioning, or building systems engineering, • Strong understanding of:, • HVAC systems and controls, • Electrical systems and lighting, • Thermodynamics and fluid systems, • Experience with utility energy efficiency programs (custom, prescriptive, and/or energy management), • Experience developing and reviewing energy savings calculations and methodologies, • Prior experience managing or mentoring engineering teams, including oversight of project delivery, QA/QC, and staff development, • Knowledge of industry codes, standards, and program frameworks, such as:, • Technical Reference Manuals, • ASHRAE 90.1, • IECC, • Professional certifications such as:, • PE, • CEM, • CMVP About Resource Innovations Resource Innovations (RI) is a women-led energy transformation firm focused on impact. Building on our expertise in energy efficiency, we’re constantly expanding our portfolio of clean energy solutions to guide utilities through increasingly complex, connected challenges. Load flexibility. Electrification. Carbon reduction. With every step, we’re leading the charge to power change. Resource Innovations is an Equal Opportunity Employer, committed to ensuring equal employment opportunities for all job applicants and employees without regard to race, color, religion, national origin, gender, age, disability, marital status, genetics, protected veteran status, sexual orientation, or any other protected status. In addition to federal law requirements, Resource Innovations complies with applicable state and local laws governing non-discrimination in employment in every location in which the company does work. Compensation & Benefits Resource Innovations offers competitive salaries based on a candidate's skills, experience and qualifications for the position. The compensation range for the base salary for this position is $90,000 - $130,000. In addition to base pay, employees are eligible for a discretionary annual bonus. The stated salary represents the expected compensation for this position. Final compensation will be determined based on factors such as the candidate's experience, education and location. In addition to base pay, employees may be eligible for a discretionary annual bonus. The stated salary represents the expected compensation for this position. Final compensation will be determined based on factors such as the candidate's experience, education and location. At Resource Innovations, we believe supporting our people is essential to delivering impact. We offer a comprehensive benefits package designed to promote health, financial security, and work-life balance. This includes three weeks of paid vacation annually, paid holidays, a 401(k) retirement plan with employer match, medical, dental and vision coverage, parental leave, an employee assistance program, commuter benefits, and additional supplemental offerings. Employment with Resource Innovations is contingent upon the successful completion of a comprehensive background check and reference check. If applicable to the position, a pre-employment drug screen may also be required. The above job description and job requirements are not intended to be all inclusive. Resource Innovations retains the right to make changes or adjustments to job descriptions and/or job requirements at any time without notice.

Job Description RF Field Engineer Location: Clifton, NJ C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C2 Systems is currently seeking a Radio Frequency (RF)/Field Engineer to join our team. If you are highly motivated and have the ability to work in a fast paced environment, this may be the role for you. You will be interacting with customers and co-workers on a daily basis and providing timely and detailed updates. This position will require you to be in the field 90% of the time. Primary Responsibilities: • Takes the lead on system commissioning, integrations, and activations, • Performs system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment, • Performs site surveys and in-depth walkthroughs, • Works (hands on) with system components such as antennas, fiber optics, coax, and RF amplifiers, • Troubleshoots and repairs systems for optimal performance, • Application of RF principles/theory (signal path, power, frequency, noise, modulations, etc.), • Multi-tasks on projects on a day-to-day basis, • Maintains test equipment and tools for continuous use, • Travels to various job sites within Maryland and outlying regions (DC, Northern Virginia, Pennsylvania and Delaware) Skills/Qualifications: • 2 year college degree (preferably technical) with relevant coursework, • 2+ years of related experience preferred (previous experience with DAS architecture and other cellular systems), • Knowledge of various wireless technologies (CDMA, WCDMA, GSM, LTE, etc.), • Possess strong technical aptitude and the desire to learn and advance within a technical field, • Comfortable working in high pressure situations, • Ability to receive and give direction on an as needed basis, • Knowledge of RF optimization techniques and best practices, • Proficient in basic computer applications (MS Office, etc.), • Must have a valid driver’s license with reliable transportation In addition, you should have the following characteristics: • Self-motivated and have the ability to work effectively under minimal supervision and direction, • Ability to work in groups, • Passion for learning new technologies, • Ability to work in a fast-paced environment, • Strong written and verbal English communication skills

Job Description Public Safety RF Engineer Location: Clifton NJ Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking a Public Safety RF Engineer responsible for public safety system engineering functions relating to RF/Wireless communications pertaining to In-Building and outdoor, passive and active (Distributed Antenna System) systems. The incumbent will work hand in hand with senior public safety RF engineers in various aspects of DAS design, installation, commissioning, testing, troubleshooting and remote monitoring. The incumbent will also perform various operational support functions such as parts procurement, equipment repair/return, inventory, and documentation. Domestic travel will be expected approximately 25-50% of the time, with the majority of that being within the Greater New York area, but does include other markets as needed. Primary Responsibilities: • Design of Radio Frequency (RF) wireless communication systems and technology, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Develop Request for Information (RFIs) and Requests for Proposals (RFPs) evaluate solutions, manage implementations, and perform Independent Verification & Validation, • Coordinating with AHJ’s, FCC License holders, Carriers, End Users, Facility Managers, and Equipment Vendors, • Supporting the efforts of our technicians and engineers and directly supporting customers, • Ensuring customer satisfaction, • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers and receivers, • Radio Frequency Exposure Studies, Intermodulation and Interference Analysis, • Multi-task projects on a day-to-day basis, • Travel to various job sites within Greater New York and other markets., • Strong background in public safety wireless communications, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Experience with RF Coverage modeling, RF design, and optimization, • Experience with LMR site equipment configuration and test, • Experience in land mobile radio, project management skills, knowledge of database reporting tools., • Familiarity with Public Safety organization operations, • Knowledge of other wireless technologies such as TETRA, GSM, UMTS, CDMA, WiFi, LTE and embedded systems, • Knowledge of microwave, circuit based, and fiber backhaul., • Knowledge of IP-based dispatch consoles and voice recorders, • Professional level certification in Wireless Communications (e.g., ETA, CWNA, Microsoft Wireless Communications Engineering Technologies, GROL Certification), • Experience or familiarity with radio frequency devices and/or systems is highly desirable., • Experience troubleshooting public safety DAS systems including ADRF, Comba, Zinwave, etc., • Familiar with the basics of IP Networking, • Multifaceted Professional capable interfacing with customers, • Proficient in basic computer applications (MS Outlook, MS Word, MS Excel, etc.), • Ability to learn quickly and understand technical materials, • Ability to shift gears quickly as priorities change, • A solid understanding of fundamental engineering principles and the ability to effectively work on multiple engineering projects simultaneously, • Requires knowledge of radio frequency and fiber optic communication technology, • Must be able to work effectively within a diverse work force including engineers, project managers, skilled craft workers, consultants, customers, and regulatory agency personnel, • Must have strong interpersonal and communications skills to be able to effectively communicate complex issues with peers, supervisors, and managers. Must be authorized to work in the US, be willing to travel up to 50%, have a clean driving record and be able to pass a company background check., • A minimum of a bachelor’s degree, preferably in electrical engineering or similar discipline with at least 5 years Land Mobile Radio (LMR) engineering experience. Master’s degree preferred. An equivalent combination of advanced education, training, and experience will be considered.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Senior Mechanical Engineer Electromechanical Systems and Industrial Machinery Employment Type: Full-Time Industry Focus: Electromechanical Equipment I Automation Systems I Industrial Manufacturing I Robotics I Custom Machinery I Food and Beverage I Packaging I Water and Wastewater I Processing Equipment A privately owned, highly respected manufacturer with over 50+ years of success delivering complex, high-quality custom and benchmark electromechanical systems for critical infrastructure. Seeking to add to our engineering team a seasoned professional to help us build custom machinery used across the food and beverage, water treatment, packaging, energy, and automation sectors. Every system is designed, fabricated, and assembled on-site in their U.S.-based facilities. A financially stable, customer-trusted, and operates with speed, precision, and integrity. With low turnover, strong leadership, and a tight-knit, collaborative team, this is a rare opportunity for a senior-level engineer looking to make a real impact. Why Work Here • A privately-owned, financially secure, stable organization with a bold growth plan, your contributions matter here, • Recession-resistant with a strong, diverse client base, • All manufacturing and engineering done on-site in the U.S., • Short lead times and fully integrated workflow, • Diverse vertical markets including food processing, automated packaging, and industrial systems, • Long-tenured team with low turnover and deep technical experience, • Real mentorship from senior engineers and technical leadership, • A collaborative, team-first culture that values craftsmanship, integrity, and innovation, • Competitive salary + performance-based bonuses, • Clear pathways for career advancement into operations, technical leadership, or project management, • Access to ongoing technical training and development resources, • Opportunities to work on meaningful projects that impact essential industries, • Flexibility, autonomy, and a culture where good ideas get traction What You Will Do • Lead the design and development of mechanical and electromechanical systems, • Engineer custom industrial machinery, motion systems, and integration for real-world automation, • Create detailed 3D CAD models and drawings using Autodesk Inventor, SolidWorks, and AutoCAD, • Play a key role in the transition to Autodesk Inventor as the core design platform, • Collaborate with sales, drafting, production, service, and R&D teams to ensure design feasibility and performance, • Attend Factory Acceptance Tests, system demos, and customer meetings, • Conduct hands-on testing and root cause analysis to solve engineering challenges, • Recommend improvements to enhance reliability, manufacturability, and cost-efficiency, • Generate full technical documentation including BOMs, manuals, and assembly instructions, • Provide limited on-site support for commissioning and validation, travel is minimal (0 to 2 percent) What You Bring to the Role • Experience designing electromechanical equipment, custom machinery, and automated systems, • High-level proficiency in Autodesk Inventor preferred, along with SolidWorks and AutoCAD, • Solid understanding of GD&T, tolerance analysis, mechanical fasteners, motion control, and pneumatics, • Familiarity with PLM systems and NPI workflows, • Hands-on background and mechanical aptitude is strongly valued. Candidates who enjoy working on cars, engines, machines, or DIY projects often excel here, • Strong communication and collaboration skills with the ability to present technical information clearly to both internal teams and clients, • Associate or bachelor’s degree in Mechanical Engineering or a related discipline, or equivalent hands-on experience, • Proficiency in Microsoft Office and collaboration tools like SharePoint and Microsoft Teams Nice to Have ~But Not Required While not required, familiarity with the following codes and standards is considered a plus: • ASME Section VIII for pressure vessel design and inspection, • ASME B31.1 and B31.3 for power and process piping, • ASME Y14.5 for geometric dimensioning and tolerancing, • ASME B16.5, B36.10M for flanges, pipes, and fittings, • ASME PTC 4 and PTC 46 for boiler and plant performance testing Traits That Help Engineers Thrive Here • Curiosity and a hands-on mindset, • Creative approach to solving practical engineering problems, • Ability to see the big picture while staying detail-oriented, • Integrity, loyalty, and a team-first attitude, • Enjoys challenging workflow, with fresh projects, • Adaptability in a fast-paced manufacturing environment Let’s Build What’s Next – Together If you’re driven by precision, purpose, and the challenge of making great ideas real, we’d love to hear from you. Looking forward getting to know you… We are as well as our client are an equal opportunity employer and welcome all qualified applicants regardless of race, gender, age, disability, veteran status, or other protected classification.

Job DescriptionCompany Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Job Description Position Purpose: Project Engineer – Performs commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; executing daily field activities; maintaining project documentation; assisting the Senior Project Engineer; and providing guidance to associate project engineers. This role requires the candidate to have technical competency, organizational skills and is expected to work well in a team environment. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including medium voltage systems., • Review system designs for compliance with client facility goals., • Assist with preparing plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment and measure results using test instrumentation., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with project teams to coordinate and execute field activities., • Review and provide input on commissioning project documentation and schedules., • Assist with submitting and maintaining daily commissioning reports., • Assist in the training of Associate Project Engineers., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • BSc/MSc in Electrical Engineering with 2 or more years with mission critical project experience, or relevant and applicable industry experience or a minimum of 4 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Experience in Mission Critical facility commissioning essential., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously and work with limited supervision., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Reasonable understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $110000 to $115000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking an experienced, highly motivated Control Systems Engineer — LabView Developer to join its rapidly growing team. The Control Systems Engineer will have ownership of the design, development, and commissioning of the control system for complex equipment within Thea Energy’s stellarator fusion demonstration plant. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Work with a team of experts in developing controls for Thea Energy’s systems., • Architect, program, and document cutting-edge distributed Data Acquisition and Control (DAC) projects utilizing National Instruments hardware and software, such as LabVIEW, VeriStand, TestStand, SystemLink incorporating DAQ, PXI, cRIO, and RIO (FPGA) architectures., • Develop modular, readable, and reusable LabVIEW code, emphasizing reliability and continual improvement., • Create engineering tools, including both desktop and web-based testing applications., • Integrate VHDL and C codes into hardware-in-the-loop (HIL) systems, utilizing both NI and open-source hardware and software platforms., • Collaborate with hardware and systems engineers to define interfaces and requirements and ensure seamless integration of DAC/HIL solutions., • Troubleshoot and swiftly resolve issues in LabVIEW-based DAC/HIL systems., • Develop and execute comprehensive test plans., • Document design specifications, test procedures, and user manuals for automation and acquisition systems.Ideal Experience & Skillsets:, • Extensive experience as a control engineer on complex, large-scale systems., • Experience with magnetic confinement fusion, aerospace, or other highly technical industries., • B.S. or M.S. in Computer Science, Electrical Engineering, or a related physics or engineering discipline., • 5+ years of hands-on LabVIEW development experience; experience with VeriStand, TestStand and SystemLink., • Proven success in advanced LabVIEW programming, focusing on Data Acquisition and Control or HIL systems, within scientific, industrial, or research environments., • Proficiency with National Instruments hardware, including cRIO, PXIe, and expertise in both Windows and RT Linux environments., • Competency in HIL/SIL software architecture., • Proficient in the development and optimization of LabVIEW applications and LabVIEW Certification (Certified LabVIEW Developer and/or Architect) is advantageous., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® Technology Services is looking to hire a Senior Applications Engineer. This role provides advanced expertise to installation and service teams, ensuring seamless interoperability across complex security platforms and enterprise applications. The Senior Applications Engineer will drive high-level troubleshooting, custom programming, system commissioning, software upgrades, and advanced diagnostics. Candidates should bring deep proficiency with integration tools, the ability to implement tailored software interfaces, and a proven track record of delivering scalable, secure, and high-performing solutions. Salary Range: $100,000 - $135,000 annually RESPONSIBILITIES: • Design and oversee advanced security system integrations to deliver cohesive, enterprise-level solutions., • Configure LAN (Local Area Network) and wireless network infrastructures to optimize connectivity, system reliability, and performance., • Lead advanced diagnostics and root-cause analysis to ensure peak system functionality and long-term stability., • Partner strategically with Project Managers, End Users, and Technical Teams to guide successful software deployment and utilization., • Resolve complex project-related software and system issues, coordinating with cross-functional technical resources as needed., • Direct escalation protocols, ensuring critical issues are communicated and mitigated promptly to minimize business impact., • Advise and coordinate with leadership to drive efficient timelines, effective resource allocation, and scalable project execution., • Oversee and schedule software licensing, compliance, and advanced training programs to foster continuous professional growth across teams., • Develop and lead end-user training strategies, ensuring seamless software adoption, optimized system operation, and enhanced client satisfaction. QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Minimum of three (3) year of experience programming and troubleshooting access control and video systems, • Advanced knowledge of industry-leading security system and equipment providers, working with enterprise level clients or large projects, • Product specific certification(s) with access control systems and video platforms, such as AMAG, Lenel, Milestone, Genetec, SoftwareHouse, • High level decision-making and complex problem-solving ability to develop innovative solutions that align with organizational strategy, • Expert ability to interpret, evaluate and apply advanced technical documentation, ensuring systems and solutions meet enterprise and client requirements, • Advanced proficiency with MS Office Suite (Excel, Outlook, PowerPoint, Project, SharePoint and Word), • Exceptional verbal and written communication skills, with internal and external stakeholders, • Ability to establish and maintain trusted partnerships across executive leadership, technical teams and client organizations PREFERRED QUALIFICATIONS (NICE TO HAVE): • Bachelor's degree in Computer Science, Engineering, or another related major COMPENSATION & BENEFITS: • Salary Range: $100,000 - $135,000 annually, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2026-1553270

Job Description About Coresite: At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Engineer Role: As a member of the company’s Engineering team, the Data Center Design & Performance Engineer is responsible for designing and reviewing electrical, mechanical, and site plans. This role requires making independent decisions and consistently exercising sound judgment to ensure alignment with CoreSite’s design standards. A strong understanding of electrical and mechanical systems, particularly in relation to data center redundancy and operations, is essential. The Engineer will collaborate closely with facility and operations teams to ensure all equipment installations are thoroughly reviewed and meet CoreSite's build standards. Duties: • Evaluate the efficiency, reliability, and engineering design of electrical, mechanical, plumbing, fire and life-safety, and building management systems for expansion and upgrade projects, • Define the scope for testing and commissioning to ensure design intent and operability of systems supporting the data centers, • Provide final quality assurance sign-off for engineered systems at the end of construction, • Collaborate with Sales Engineering to design custom engineering solutions for customer deployments, • Support the sales process for complex opportunities by providing technical expertise, • Assess installed systems to optimize efficiency and reliability, • Review and approve engineering modifications to existing facilities, • Provide engineering support to Data Center Operations, including failure analysis and system maintenance of critical infrastructure, • Ensure quality control for Operations teams, focusing on equipment, safety, and maintenance best practices, • Support commissioning activities by reviewing test scripts and witnessing test performance, • Maintain up-to-date documentation related to design, procurement, and operational standards, • Special projects as assigned Knowledge, Skills, & Abilities: • Ability to work 40% on-site from an approved CoreSite Market and 60% remotely from that same market, with flexibility to adjust onsite expectations as business needs evolve, • Ability to travel up to 40% of the time to support testing and construction activities, with flexibility to adjust travel commitments as business needs evolve. Must demonstrate adaptability in managing travel requirements in response to company growth, • In-depth working knowledge of data center design, operations, and infrastructure, • Strong strategic problem-solving abilities with a proactive approach to challenges, • Proficiency in AutoCAD, or other computer aided design software, as well as in Microsoft Office, primarily Excel, • Ability to operate and interpret results from test equipment, such as power quality meters, thermal imaging cameras, multi-meters, to evaluate and troubleshoot equipment operation and performance, • Commitment to personal development and the ability to pursue relevant certifications and accreditations (i.e. LEED AP, CDCDP, etc.), • Excellent written and verbal communication and problem-solving skills, with the ability to collaborate effectively with diverse personalities and cross-functional teams in both on-site and remote environments, • Bachelor’s degree in Engineering or a related field preferred; equivalent work experience, preferably within the data center, telecommunications, or real estate industry, considered in lieu of educational qualifications. The physical demands described here are representative of those that must be met by an employee to successfully perform the job’s essential functions. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the job’s duties, the employee is occasionally required to stand; walk, sit, use hands to handle or feel objects, reach with hands and arms, climb stairs, balance, stoop or kneel, talk, and hear. The employee must occasionally lift and/or move up to 25 pounds. Ability to travel is required. Compensation: Compensation for this role includes a base salary between $110,000 to $135,000 annually. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Posting Timeline: This position is expected to be posted through April 15, 2026. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for Cigna, • Healthcare and dependent care flexible spending account (FSA) plans, • Health saving account (HSA) plans for employees participating in the High Deductible Health Plan, • Life, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount, • 16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionCompany Description Sr. AV Project Manager Location: Ridgefield Park, NJ Job Type: Full-time (1-Year Contract) Work Type: On-site Salary: $7,380 / month Job Overview We are seeking an experienced Senior AV Project Manager to lead enterprise-level Audio/Visual (AV) system design, consulting, and project execution. This role requires a technically strong professional who can bridge business needs with AV technology solutions, manage projects from planning to completion, and provide hands-on support during system deployment. The ideal candidate will have experience designing enterprise video conferencing systems, managing AV integrations, and working directly with clients and cross-functional technical teams. Job Description Key Responsibilities Client & Business Engagement * Act as the primary AV subject matter expert (SME) for clients and internal teams * Conduct needs assessments and recommend scalable AV solutions * Present AV technologies including video conferencing and collaboration platforms * Translate business requirements into technical system designs * Maintain strong relationships with customers, vendors, and integration partners AV System Design & Engineering Design and engineer enterprise AV systems including: * Video conferencing rooms (Huddle, Conference, Boardroom, Training Rooms) * Collaboration spaces and multi-purpose environments * Digital signage and integrated AV systems Experience with: * Cisco video conferencing solutions (Room Series, Codec platforms) * Poly collaboration systems * Cisco Webex * Microsoft Teams * Zoom Additional responsibilities include: * Signal flow design * Network integration * DSP configuration concepts * Control systems integration Project Management & Leadership * Lead AV projects from concept through completion * Manage internal technicians and external integration partners * Develop project timelines, milestones, and resource plans * Coordinate with IT, networking, facilities, and construction teams * Ensure projects are delivered on time and within scope and budget * Identify and mitigate technical and operational risks BoM & Commercial Review * Develop detailed Bills of Materials (BoM) for AV systems * Validate vendor quotations and equipment compatibility * Ensure alignment with project scope and budget * Support procurement and cost optimization strategies Documentation & Reporting * Define project scope clearly for clients and integration teams * Produce technical documentation and system diagrams * Prepare completion reports including: * As-built documentation * Equipment lists * Test results * Client sign-off documentation Installation Oversight & Technical Support * Oversee AV installation and commissioning * Support system testing and user acceptance * Troubleshoot video conferencing and AV integration issues * Provide end-user training and executive-level support Qualifications Qualifications Education * Bachelor’s degree in Network, Telecommunications, Audio/Visual, or related field Experience * 7+ years of AV system design, integration, or project management experience preferred * Experience managing enterprise AV deployments * Strong understanding of IP-based AV and networking fundamentals * Experience working with unified communication platforms Skills * Strong communication skills with executives and technical teams * Ability to lead cross-functional teams * Strong documentation and reporting capabilities * Detail-oriented with strong decision-making ability * Ability to work in fast-paced environments Additional Requirements * Travel up to 50% * Proficiency in Microsoft Office (Word, Excel, PowerPoint) Preferred Qualifications * Korean / English bilingual * Experience with enterprise AV environments Preferred Certifications * AVIXA CTS / CTS-D / CTS-I * PMP Certification Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description Sr. AV Project Manager Location: Ridgefield Park, NJ Job Type: Full-time (1-Year Contract) Work Type: On-site Salary: $7,380 / month Job Overview We are seeking an experienced Senior AV Project Manager to lead enterprise-level Audio/Visual (AV) system design, consulting, and project execution. This role requires a technically strong professional who can bridge business needs with AV technology solutions, manage projects from planning to completion, and provide hands-on support during system deployment. The ideal candidate will have experience designing enterprise video conferencing systems, managing AV integrations, and working directly with clients and cross-functional technical teams. Job Description Key Responsibilities Client & Business Engagement * Act as the primary AV subject matter expert (SME) for clients and internal teams * Conduct needs assessments and recommend scalable AV solutions * Present AV technologies including video conferencing and collaboration platforms * Translate business requirements into technical system designs * Maintain strong relationships with customers, vendors, and integration partners AV System Design & Engineering Design and engineer enterprise AV systems including: * Video conferencing rooms (Huddle, Conference, Boardroom, Training Rooms) * Collaboration spaces and multi-purpose environments * Digital signage and integrated AV systems Experience with: * Cisco video conferencing solutions (Room Series, Codec platforms) * Poly collaboration systems * Cisco Webex * Microsoft Teams * Zoom Additional responsibilities include: * Signal flow design * Network integration * DSP configuration concepts * Control systems integration Project Management & Leadership * Lead AV projects from concept through completion * Manage internal technicians and external integration partners * Develop project timelines, milestones, and resource plans * Coordinate with IT, networking, facilities, and construction teams * Ensure projects are delivered on time and within scope and budget * Identify and mitigate technical and operational risks BoM & Commercial Review * Develop detailed Bills of Materials (BoM) for AV systems * Validate vendor quotations and equipment compatibility * Ensure alignment with project scope and budget * Support procurement and cost optimization strategies Documentation & Reporting * Define project scope clearly for clients and integration teams * Produce technical documentation and system diagrams * Prepare completion reports including: * As-built documentation * Equipment lists * Test results * Client sign-off documentation Installation Oversight & Technical Support * Oversee AV installation and commissioning * Support system testing and user acceptance * Troubleshoot video conferencing and AV integration issues * Provide end-user training and executive-level support Qualifications Education * Bachelor’s degree in Network, Telecommunications, Audio/Visual, or related field Experience * 7+ years of AV system design, integration, or project management experience preferred * Experience managing enterprise AV deployments * Strong understanding of IP-based AV and networking fundamentals * Experience working with unified communication platforms Skills * Strong communication skills with executives and technical teams * Ability to lead cross-functional teams * Strong documentation and reporting capabilities * Detail-oriented with strong decision-making ability * Ability to work in fast-paced environments Additional Requirements * Travel up to 50% * Proficiency in Microsoft Office (Word, Excel, PowerPoint) Preferred Qualifications * Korean / English bilingual * Experience with enterprise AV environments Preferred Certifications * AVIXA CTS / CTS-D / CTS-I * PMP Certification Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionWho we are... At Ecosystem we believe we should be accountable for results. That’s why we've integrated engineering and construction, seeing our projects through from design concept to implementation and commissioning. And that's how we can efficiently solve complex energy challenges in the built environment. Here are some of the projects we've been working on recently: Adelphi University, Brown University and San Diego Padres Stadium. Who you are... We are on the lookout for a dynamic Technical Construction Manager, someone who is an expert troubleshooter, who thrives on managing complex construction environments, who can be accountable and dreams of making an impact. What you will do... • Oversee on-site construction operations, managing subcontractors, client, and stakeholders at higher-education facilities., • Drive the success of projects in a versatile, and highly integrated team that works in tandem from design to completion, whilst ensuring safety and quality., • Manage and resolve technical challenges on-site by leveraging your problem-solving skills to achieve project goals in more efficient and cost-effective ways., • Navigate change/scope creep and solve technical challenges on site, always balancing costs, budgets schedules, and people., • Propose, estimate, and present project upgrades to the client., • Understand aspects of energy performance measures before committing to implementation., • Assume responsibility for managing project construction execution, adhering to budget, schedule, and quality standards., • Deliver an exceptional client experience. Your profile..., • 5+ years of construction management/project manager/project engineer experience with recognized leadership in execution., • Experience in HVAC or mechanical construction, • Strong communication (written and verbal), listening, and negotiating skills in English., • Team player with a positive attitude, resilience, and determination., • Quick critical thinking ability under pressure., • Top-notch organizational skills., • Resourceful and excellent judgment., • Field-based role with 4-5 days/week on active project sites across NYC and surrounding regions (Greater NY, Long Island, New Jersey; occasional Philadelphia). Candidates must live within commuting distance of the NYC metro area. Office presence is as needed; regional travel flexibility is required.What Ecosystem offers..., • Annual base salaries (approx. $120,000 - $170,000). Base salary is an approximate range and dependent on location and years of relevant experience., • High talent density organization in a rock-solid business environment., • “Ask me anything” approach from ownership and management., • Industry-leading health and safety practices., • Internal technical training and mentorship opportunities., • Team-oriented, collaborative work environment where curiosity and risk-taking are encouraged., • The opportunity to take ownership of results and see projects through from design to implementation., • Focused professional nurturance to help you shape your own career., • Competitive salary reviewed annually., • Paid time off per year: We observe 10 public holidays, we offer a minimum of 15 days of vacation, and 5 personal (sick) days are encouraged to be taken (no justification required). On top of that, we have paid time off between December 25 and January 1 when our offices close for the holiday period for a well-earned break., • A comprehensive compensation and benefits package, including medical, dental, vision, life insurance, long-term disability, and 401K., • 24/7 Employee Assistance Program and telemedicine., • Thriving people-first culture: we put our values in action in DEI, CSR, Innovation, and Social committees. We celebrate our successes together at Ecofest- watch the video here.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Construction Manager with proven experience and expertise in Bridge/Rail projects. The Senior Construction Manager will oversee a multidisciplinary team and lead the project through preconstruction to commissioning for a multi-million dollar bridge repair project. Responsibilities • Lead overall construction planning, scheduling, and execution for major bridge and rail projects., • Apply expert level of knowledge of construction means and methods, materials and techniques for bridge repair., • Manage field operations, subcontractors, and project engineering staff to ensure work is completed safely, on time, and within budget., • Oversee coordination with rail agencies, transportation authorities, utility providers, and other stakeholders., • Review design documents, shop drawings, and technical specifications to ensure compliance and constructability., • Implement and enforce safety programs, quality control procedures, and risk-management strategies., • Ensures adherence to contract terms, performance, quality assurance, compliance requirements, and engineering specifications., • Prepare progress reports, cost forecasts, and change-order documentation., • Serve as the primary on-site project leader, maintaining strong communication with clients, consultants, and internal teams., • Establishes work plan and multidisciplinary staffing of the project and arranges for assignment of project personnel., • Mentor junior staff and contribute to long-term workforce development. Qualifications • Bachelor’s degree in Construction Management, Civil Engineering, or related field (Master’s preferred)., • Active New Jersey Professional Engineer (PE) License is required., • 20+ years of construction project management experience with expert level knowledge of bridge and/or rail projects., • Minimum of 7+ years in a supervisory role, • Management of at least three (3) bridge construction or rehabilitation projects and one (1) completed project involving railroad infrastructure within an active railroad environment., • Strong understanding of track work, rail operations, bridge structures, and applicable codes and standards., • Proven track record of delivering multi-million-dollar transportation projects., • Expertise in project scheduling software (e.g., Primavera P6), document controls, and cost management tools., • Exceptional leadership, communication, and problem-solving skills., • Ability to work in a fast-paced environment and manage multiple priorities. BenefitsNaik offers a competitive compensation package including: • Generous sign-on bonus, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Bosch Building Technologies LLC seeks Software Engineer II (Multiple Positions) at its facility located at 300 Broadacres Dr, Bloomfield, New Jersey 07003. Provide controls database, graphics, programming, etc. for contract sequences as provided by the Design Specialist, project specifications, or other applicable sources (10%). Develop the software necessary for a comprehensive integrated building automation system or energy management system (10%). Integrate with other 3rd party systems into building management systems using protocols like MQTT and RESTful API (10%). Work with multiple proprietary systems to make them talk on a unified platform using specialized software and specialized code (10%). Work with other building equipment suppliers to resolve issues as they arise (5%). Develop project reports to measure building analytics and provide energy savings recommendations (3%). Support installation and startup personnel with adjustments to software as required (3%). Support field teams with system data communication trouble shooting using protocol analyzers like WireShark® and Visual BACnet® (3%). As required, attend project coordination meetings and provide technical support (2%). Provide site specific customer training on projects (2%). Provide information and support for other contractors on project site (2%). Debug mechanical and installation issues that can come up when executing the static and dynamic start up and commissioning of building controls (5%). Develop branch standards for building management system software and client graphic user interface systemS (10%). Develop enhancements to existing office standards to increase functionality and efficiency (5%). Provide new product support and training to employee personnel (3%). Provide service support on existing systems ensuring proper and efficient operation as well as providing ongoing support to the facility’s building engineers (3%). Work with the internal project design engineers and outside engineer consultant firms to resolve project design issues and suggest project enhancements (3%). Participate in the transition between Operations Team and Service Team (1%). Support the sales team during project bid and estimating process, including potential customer system demonstrations (2%). Mentor and train junior software engineers on products, software and processes (5%). Complete all office safety requirements and demonstrate safe practices while working in the office or on-site (1%). Complete time sheets, service work orders, and other paperwork required for this position in an accurate and timely manner (2%). REQS: This position requires a bachelor’s degree, or foreign equivalent in Mechanical Engineering, Electronic Engineering, Electrical Engineering, Mechatronic Engineering, HVAC Controls or a related field. Plus 5 years of experience as a System Specialist, System Engineer, or occupation involving HVAC Controls engineering. Additionally, the applicant must have employment experience with: (1) Building systems including HVAC, plumbing, mechanical and electrical systems; (2) HVAC systems control strategies; (3) BMS systems software programming; (4) Networking system switch design and programming; (5) Electronic test equipment (volt meters, amp meters, or oscilloscopes); and (6) BACnet and Modbus protocols. Telecommuting: No Telecommuting Allowed. Applicants who are interested in this position should apply to Careers | Bosch Building Technologies | Building Technologies, search (Software Engineer II 9036780)

Successful candidates will have experience in Electrical Systems & Equipment with a focus in Data Centers and Mission Critical Facilities; experience and an understanding of Building MEP Systems Design, Construction, and Commissioning of Critical Systems ranging in size, rating, and complexity;

Perform all phases of commissioning for our clients, under the support of a senior level commissioner, including producing commissioning materials for design phase commissioning, construction phase commissioning, acceptance testing and post acceptance commissioning. Participate in commissioning meet

A growing civil and structural engineering firm is hiring. Bachelor's degree in civil engineering. Civil Engineering firm with locations in Charleston and Greenville, looking for a Project Manager with 10+ years of experience, mainly within the land/site development space for our Greenville office.

The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment.

The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment.

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Ground

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Lead Gr

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Lead Gr

Join BLT’s team of dedicated professionals as a .This position performs various hands-on maintenance duties necessary to maintain and enhance the value of our luxury community located in Jersey City, NJ.Duties & Responsibilities of the .Assists in completing work in “make-ready” apartments,

Hiring experienced Project Engineers and Project Managers. Must be experienced in field engineering, cost control, RFI's, QAQC, CPM scheduling software.

Join BLT’s team of dedicated professionals as a .This position performs various hands-on maintenance duties necessary to maintain and enhance the value of our luxury community located in Jersey City, NJ.Duties & Responsibilities of the .Assists in completing work in “make-ready” apartments,

Walmart is expanding its massive workforce, and American Career Guide is here to help you explore available roles at the retail giant.Positions are open across multiple departments, offering career paths for both entry-level talent and experienced professionals.Join the Walmart team and help provide

Company Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities.Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the col

Join BLT’s team of dedicated professionals as a Maintenance Technician II.This position performs various hands-on maintenance duties necessary to maintain and enhance the value of our luxury community located in Jersey City, NJ.Schedule: Day shift 8:30am-5:30pm Duties & Responsibilities of th

Brookdale Senior Living - 590 Old Hook Road - Responsibilities: Keeping our communities running in top-notch condition by performing maintenance on HVAC, elevator, fire and sprinkler equipment, generators, landscape, kitchen equipment and emergency pull cord equipment; Perform general maintenance pr

Shamin Hotels - - Responsibilities: Troubleshoot and repair hotel equipment, facilities, and systems (including HVAC and electrical); Perform preventative maintenance and regular inspections; Coordinate maintenance staff; Inspect and repair minor problems in guest rooms; Inspect and repair minor pr

Responsibilities: Respond to work orders for minor repairs to equipment; Order and manage parts inventory; Complete daily reports and schedule/prioritize assignments; Read, understand, and follow service manual guidelines; Work safely and handle other duties as assigned.

Meyer Jabara Hotels - 133-36 37th Avenue - Responsibilities: Manage the physical operations of the hotel to ensure the total comfort and satisfaction of hotel guests.Check and perform major repairs to refrigeration, heating, ventilation and air conditioning, plumbing, water treatment, and electrical

The Geo Group - - Responsibilities: Surveys assigned jobs and ensures sufficient materials and tools are on hand to complete work; Coordinates work, provides technical assistance and performs inspections of detainee maintenance staff; Performs preventive, corrective, and emergency maintenance; Oper