Computer programming jobs in Edison, New JerseyCreate job alerts

Job Title: Special Procedure Technologist Location: RWJ New Brunswick Department: Special Procedures-Radiology Req#: 0000178131 Status: Full-Time Shift: Day Pay Range: $43.63 - $54.55 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: Assists the nursing and physician team in the coordination of daily work from a technical aspect. Assists Interventional Radiology team in the preparation, performance and completion of all examinations performed both departmental and non-departmental. Assures overall quality control and quality assurance standards are achieved. Assures overall patient comfort while achieving technical standards during procedures. Qualifications: Required: • Active, valid ARRT and NJ DEP license., • Basic Life Support (BLS) through the American Heart Association (AHA) required., • Minimum of 2 years radiology experience preferred., • Minimum of 2 years radiology experience preferred., • Procedural Interventional Radiology experience preferred. Scheduling Requirements: • This is a Full-Time, Day position at 40 hours/week (4, 10-hour shifts, with an on-call and weekend rotation requirement)., • Assists in the coordination of the daily work schedule and preparation of the rooms for the day,, • Collaborates with physician for proper orders, x-ray requisitions and lab results,, • Responsible for proper technical exposure factors with digital and conventional equipment to minimize radiation exposure for the safety and comfort of the patient,, • This includes programming of digital computer, schonander film stand and contrast injectors,, • Paid Time Off (PTO), • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Retirement Plans, • Short & Long Term Disability, • Life & Accidental Death Insurance, • Tuition Reimbursement, • Health Care/Dependent Care Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits (e.g., Pet Insurance) RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education. Equal Opportunity Employer

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, Fairway®, Dibruno Bros. and Gourmet Garage® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. Summary The Analyst will use statistical techniques and machine learning to analyze complex data sets to extract insights that will be used to inform strategic decisions across Wakefern. Essential Functions • Partner with internal stakeholders to identify business needs and deliver analytical insights in a uniform, consumable format, • Make data-driven business recommendations to leadership and membership based on results/trends identified in data analysis, • Design, and implement descriptive, predictive, and prescriptive analytical models for use across a wide range of business cases such as customer segmentations, sales planning, and marketing., • Collaborate with IT to enable data and system architectures that simplify data accessibility, collection and curation for analytical purposes, • Own the process of gathering, extracting, and compiling data across sources via relevant tools (i.e. SQL, R, Python), • Develop dashboards which drive actionable insights; educate stakeholders to drive adoption of reporting., • Foster a collaborative and innovative work environment across Wakefern Additional Functions • Monitor data pipelines and identify potential data quality issues; enforce data quality standards, • Challenge assumptive thinking and the status quo through data-driven analysis, • Agility to adjust priorities and work on multiple projects at the same time, while addressing ad hoc data requests Qualifications • Minimum of 4-year bachelor’s degree in business, Data Analytics, Economics, Statistics or related degree. Advanced degree preferred, • 4+ years of advanced analytics or data science experience in a business environment; Grocery or CPG industry experience a plus but not required, • Proficient in programming languages such as Python, R, & SAS/SQL are required, VBA a plus, • Proficient in Data Visuals & Data Visualization tools (i.e. Tableau, Power BI, Looker), • Familiarity with Google Cloud tools (i.e. BigQuery & Vertex AI) and database structures Working Conditions & Physical Demands • Ability to monitor computer screens for long periods of time, • Ability to work a hybrid schedule, with a current requirement of 4 days in person, • Ability to flex hybrid schedule to attend important meetings and vendor or store visits based on business needs Competencies • Communicate Effectively, • Drive for Results, • Embrace Change, • Stay Competitive, • Build Relationships, • Develop You Compensation and Benefits The salary range for this position is $85,000 to $130,000 annually. Placement in the range depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements. About The Work This job description is intended to set forth the general nature and essential duties and responsibilities of the work performed by associates for this position. It may not contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates to do this job. Associates may be assigned additional responsibilities as necessary. The Company reserves the right to revise this job description at any time and to require associates to perform other tasks as circumstances or conditions of its business, competitive considerations or the work environment changes. This document describes the position currently available and is not an employment contract. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. If requested, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position covered by this Job Description is expressly declared to be “at will,” meaning Wakefern has the right to terminate the incumbent’s employment at any time, with or without cause. Any written or oral promises or representations to the contrary are expressly disavowed and should not be relied upon by any associate. Any change to this “at will” employment status must be in writing and signed by the Vice President of Human Resource.

Job Description Overview CTG is seeking to fill an Application Developer - z/OS position for our client. Location: Piscataway, NJ Duration: 12 months Duties: * Design, develop, and maintain applications in an IBM Mainframe z/OS environment. * Write and maintain JCL, REXX scripts, and TSO/ISPF utilities. * Develop and support applications using COBOL, PL/1, or Assembler. * Work with VSAM, DB2, or IMS-DB databases to ensure data integrity and performance. * Support transaction processing environments such as CICS or IMS-DC. * Troubleshoot and resolve production issues while adhering to best practices and standards. * Collaborate with cross-functional teams to deliver high-quality solutions. Skills: * Strong IBM Mainframe z/OS expertise, including VSAM, JCL, REXX, and TSO/ISPF. * Proficiency in at least one programming language: COBOL, PL/1, or Assembler. * Experience with DB2 or IMS-DB databases. * Familiarity with transaction processing: CICS or IMS-DC. * Strong problem-solving, analytical, and debugging skills. Experience: * Minimum of 3–5 years of hands-on Mainframe development experience in z/OS environments. * Proven track record of application development and support in enterprise Mainframe systems. Education: * Bachelor’s degree in Computer Science, Information Technology, or related field, or equivalent experience. Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. The expected base salary for this position ranges from $50.00 to $120.00/hour. Salary offers are based on a wide range of factors including relevant skills, training, experience, education, market factors, and where applicable, licensure or certifications obtained. In addition to salary, a competitive benefit package is also offered.

Job DescriptionSr. Software System Engineer Role Overview As a Sr. Software System Engineer, you will act as the bridge between data-center domain knowledge, user experience needs, and software architecture. You will research data center technologies, dissect complex concepts, design features, design UI/UX and write high-quality requirements that guide our development team. This role is ideal for someone who enjoys tinkering, reasoning through challenging problems, and understanding how things work end-to-end. Key Responsibilities • Understand deeply how our DCIM software system is architected and how components interact., • Contribute to solution design and feature architecture; identify and document thorough functional and non-functional requirements., • Design new requirements with all existing requirements in mind to avoid conflicts and spot unforeseen issues., • Think critically and logically to solve multidimensional and intricate problems., • Research new technologies, data-center equipment, and protocols to design new features or improve existing capabilities., • Translate complex engineering and data-center concepts into clear, actionable requirements for developers., • Work closely with product, UX/UI, and development teams to ensure features are logical, intuitive, and visually clean., • Create nearly pixel-perfect UI Mockups to ensure clarity, simplicity, and usability., • Understand the SQL database architecture such that proposed database changes maintain simplicity and performance., • Participate in troubleshooting, validating workflows, and improving system logic., • Support quality assurance by validating software behavior matches design intent.Required Skills & Qualifications, • Bachelor’s degree in Electrical Engineering, Computer Engineering, Systems Engineering, or equivalent hands-on experience with data center power systems and software., • Strong understanding of data center infrastructure, including servers, networking, power distribution, PDUs, UPS systems, cooling, racks, and cabling., • Solid knowledge of electricity fundamentals, including three-phase power, power calculations, loads, redundancy concepts, and electrical efficiency., • Demonstrated understanding of how software is built — from technical architecture to APIs, data models, performance, and UI considerations., • Ability to think logically and reason through highly complex, multi-layered problems., • Curiosity-driven mindset: enjoys exploring “how things work” and learning new technologies., • Experience writing detailed, clear, and actionable technical requirements or documentation., • Strong collaboration and communication skills with cross-functional teams., • Eye for clean, intuitive UI/UX, even if not a designer.Preferred Qualifications, • Prior experience with DCIM, BMS, EMS, or related infrastructure software., • Hands-on experience with electrical systems, or data-center operations., • Familiarity with REST APIs, data modeling, and protocols such as SNMP, Redfish, Modbus, MQTT, etc., • Background in feature design, system architecture, technical product management, or solution engineering., • Basic understanding of SQL and can write simple queries, • We are all about delighting our clients and live/breathe the end client/user experience, • We stock the office with soda, snacks, coffee and tea for you to refuel throughout the day, • We have amazing PTO Policy that allows you to take care of yourself and your family, • We offer medical, dental, vision and life insurance to eligible employees, • We believe in collaboration, teamwork, creativity and taking initiativeInterested? Read on for additional details about this opportunity to join our amazing team! Powered by JazzHR HhGIAQRFVv

Job Description Card Finishing Technician About CompoSecure Founded in 2000, CompoSecure (Nasdaq: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for the set-up, repair, preventative maintenance, and operation of equipment to achieve production goals with a high level of detail and accuracy. Key Responsibilities: • Primary trainer for new hires in machine operation including documenting the training., • Lead the productivity, maintenance, and quality of the Muhlbauer equipment., • Complete responsibility of machine start-up, shut down and changeover., • Understand what the expectations are of a work order., • Set up machines as required for specific jobs including new programs, as needed., • Observe machine operations to verify accuracy of machine settings while producing a top-quality product., • Detect malfunctions or out-or-tolerance conditions., • Use precision measuring instruments such as drop gauges and push testers when setting up or adjusting machines., • Inspect "first part" and inspect work pieces throughout the production run for out-or-tolerance conditions., • Ensure Preventative Maintenance is completed and spare parts inventories are maintained., • Pull required fixtures, holding devices and materials, as required., • Minor repairs of machine within capability., • Ensure all documentation is completed properly including, computer logs, maintenance logs and accountability logs. Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently., • Must be able to keep record of time spent and materials used., • Must be able to use precision measuring tools and equipment, read schematics, and is familiar with common measuring tools., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • Must maintain adequate levels of performance and motivation despite job tasks that are routine, repetitive and/or non-stimulating., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 5 years or more of relevant experience, • High School or GED Diploma required, Technical School Certification/Degree Preferred, • Ability to independently troubleshoot mechanical and electrical problems using schematics and diagnostic equipment., • Must have knowledge of mathematical skills with all units of measure, using whole numbers, common fractions and decimals, • Must be capable of programming, setting up and maintaining various equipment, • Competencies with pneumatic technology and hydraulics, • Must be able to work with limited supervision and function as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Must hold themselves accountable for doing whatever is needed to meet customer commitments, • Must be able to understand and carry out oral and written directives, • Must have the ability to work under pressure and to adhere to deadlines and to have the ability to be flexible, • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for up to 12 hours per day including the following:, • Standing for up to 12 hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Short notice, overtime and some weekend demand according to production needs CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Why Join BEUMER Group? BEUMER Group is a global leader in automated sortation solutions for e-commerce fulfillment centers. Our BG Sorter ET Tilt-Tray, BG Sorter CB Cross-Belt, BG Line Sorter, and BG Pouch System are designed to optimize performance and scalability for major e-commerce players. As a Controls Engineer II, you will contribute to the development and implementation of these state-of-the-art technologies, ensuring seamless integration with warehouse management systems and high-speed logistics operations that shape the future of online retail. Career Growth & Professional Development: At BEUMER Group, your career doesn’t just stop at Controls Engineer II—it grows with you. We foster an innovative, collaborative environment where engineers can expand their expertise through: • Ongoing mentorship and guidance from industry experts., • Advanced training in automation, machine control systems, and emerging technologies. BEUMER Group’s advanced sortation systems are transforming e-commerce fulfillment with high-speed, scalable, and cost-effective automation. As a Controls Engineer II, you’ll help integrate and optimize these solutions for some of the world’s leading e-commerce brands. Join a global leader driving efficiency and innovation in fulfillment operations. Be part of a team that's redefining digital commerce through automation excellence. Exciting Travel & Global Exposure: As part of the BEUMER team, you will gain international experience by working on high-profile projects with cutting-edge automation technologies. Whether commissioning systems across North America or collaborating with teams worldwide, you’ll develop invaluable expertise while exploring new opportunities in automation. Job Description General Responsibility Are you ready to take your engineering expertise to the next level? As a Controls Engineer II at BEUMER Group, you will play a pivotal role in designing and programming machine controls for cutting-edge high speed sortation systems that power the e-commerce industry. This hands-on position requires technical excellence, organizational skills, and strong communication abilities to ensure seamless automation and efficiency in high-speed fulfillment operations. Responsibilities: • Translate customer requirements into programmatic designs for BEUMER sorters., • Design and program operator panels and HMI systems for intuitive user interaction., • Prepare and test PLC hardware for projects, ensuring reliability and efficiency., • Collaborate with electrical engineering to define I/O networks and addressing., • Work with PC software developers to integrate machine control systems., • Conduct in-house emulation-based testing at BEUMER offices to validate system performance., • Participate in on-site commissioning, ensuring smooth deployment., • Create and maintain documentation to optimize workflow and improve processes., • Provide training materials to support operational excellence. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Requirements & Skills: • Bachelor's or Master's degree in EE/CE or equivalent experience., • 3+ years of hands-on work experience in controls engineering., • Proficiency in advanced machine control concepts and fundamental mathematical techniques., • Demonstrated expertise in programming Allen-Bradley and/or Siemens PLCs at a "Program Development Level," enabling simple program modifications for a single processor. Capabilities include hardware selection, I/O assignment, and logical control sequence identification in a streamlined and iterative process—all meticulously documented and adhering to the company's programming standards., • Capability to develop and integrate SCADA systems for industrial automation, with a focus on Ignition SCADA platforms., • Ability to evaluate engineering challenges and develop innovative solutions, • Strong communication skills (verbal and written)., • Attention to detail and ability to learn quickly., • Team-oriented mindset with a proactive approach to problem-solving., • Time management excellence to handle multiple tasks efficiently., • Ability and willingness to travel nationally and internationally for project execution, up to 40%. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description Zone IT Solutions is seeking a skilled IBM BPM Engineer to join our team. In this role, you will be responsible for developing, implementing, and maintaining business process management (BPM) solutions using IBM BPM technology. You will work closely with clients to analyze their business requirements and deliver efficient solutions that enhance workflow processes. Requirements • Bachelor's degree in Computer Science, Information Technology, or related field., • Minimum of 3 years of experience working with IBM BPM, including process modeling and automation., • Experience in designing and implementing BPM solutions using IBM BPM Suite., • Strong understanding of business process management concepts and methodologies., • Proficiency in business process modeling tools and techniques., • Knowledge of Java, SQL, and other relevant programming languages., • Ability to work closely with stakeholders to gather requirements and translate them into technical specifications., • Experience with integrations involving APIs and web services., • Excellent problem-solving and analytical skills. About Us Zone IT Solutions is Australia based Recruitment Company. We specialize in Digital, ERP and larger IT Services. We offer flexible, efficient and collaborative solutions to any organization that requires IT, experts. Our agile, agnostic and flexible solutions will help you source the IT Expertise you need. If you are looking for new opportunities your profile at Also follow our LinkedIn page for new job opportunities and more. Zone IT Solutions is an equal opportunity employer and our recruitment process focuses on essential skills and abilities. We welcome applicants from a diverse range of backgrounds, including Aboriginal and Torres Strait Islander peoples, people from culturally and linguistically diverse (CALD) backgrounds and people with disabilities.

Job Description COMPANY OVERVIEW: Sampled is a fully integrated laboratory and biorepository with industry-leading storage, sample management, multiomics, cellular services, and custom clinical kitting. Founded in 1999 as RUCDR at Rutgers University, Sampled operates facilities in the US and UK and is CAP accredited and CLIA licensed. Sampled is committed to providing the highest quality sample storage, processing, and analysis services that enable researchers to make new discoveries and advance human health. When combined with state-of-the-art biobanking facilities, these capabilities provide comprehensive scientific solutions that speed time to quality data. Sampled is committed to building a sustainable, inclusive and diverse culture where team members enjoy equal opportunities in a safe, supportive and empowering environment. Sampled believes that as an organization we have a duty to be actively engaged in supporting not just the clients and industries we serve but the communities where we live and work. POSITION SUMMARY: This business critical role leads a multi-disciplinary core bioinformatics team focused on building and maintaining world-class computational biology and bioinformatics capabilities. The successful candidate will report directly to the CIO and collaborate with a diverse and interdisciplinary team of scientists and engineers to generate and implement impactful products and services which meet client needs. As leader of bioinformatics development, the Sr Director of Bioinformatics will design and implement NGS sequencing data analysis pipeline, and other bioinformatics and AI tools. The director will collaborate with research and development teams to provide support for assay development, validation, and commercialization for genomics, proteomics, and precision medicine research. There will be a focus on providing support for data analysis and data delivery by automating manual processes and building reliable computing infrastructure in the cloud and on premises. The director will evaluate new bioinformatics and deep learning technology and provide adoption strategy for company growth. Additionally, this leader will research and develop Bioinformatics and Data as a Service to enhance Sampled’s product portfolio offering. This position will be based onsite at Sampled’s Headquarters in Piscataway, New Jersey, minimum 3 days per week. RESPONSIBILITIES: Lead and develop the core bioinformatics team(s) and serve as a mentor for other bioinformatics and/or software developer staff members on analysis approaches and best practices. Leverage leadership skills and experiences to continuously improve the function, including talent, structure, processes, tools, and techniques Lead and execute product strategy and service roadmap. Lead and manage internal challenges / conflicts at enterprise scale and complexity, working in partnership and collaborating with lab services. Successfully and closely collaborate with clients and program managers in leading the design, implementation and refinement of the tools, methods and pipelines. Work with research and development teams to participate in project planning and design plan for bioinformatics development, execution, and test/validation. Ensure products meet regulated and/or clinical validated products requirements; for example, GxP, CLIA or CAP environments. Ensure all change controls follow quality control software development best practice, SOPs and regulatory requirements. Daily focus of self on bioinformatics tool development needs of NGS pipeline, microarray data analysis and process automation. Analyze R&D data for assay development and other research needs. Perform tool validation and generate validation reports. Troubleshooting of bioinformatics tool issues. Provide support for daily data analysis and data delivery. Evaluate third party bioinformatic tools, perform proof-of-concept test, and provide adoption and integration strategy. Develop new solutions including data analysis pipeline using Python, Nextflow and WDL Working with IT, develop and implement data storage and backup plan and support company growth. Be a proactive member of Sampled’s Global Senior Leadership Team (SLT), maximizing internal communication and team work opportunities, and ensuring personal accountability and ownership to deliver on commitments. Build a positive culture, and be an active champion and role model of Sampled Core Values: Strive to delight our clients, Move innovation forward, Accelerate your business, Rise together as a team, Transcend what is possible. POSITION REQUIREMENTS: Ph.D. degree in Bioinformatics, Computational Biology, Engineering, Computer Science, and other related fields with minimal five years biotech and/or pharmaceutical experiences or Master’s degree minimal eight years biotech and or pharmaceutical experiences. 7+ years experience leading Bioinformatics teams at Director level or above, including managing remote based team members. Excellent leadership skills and the ability to set direction and develop the team. Strategic mindset and high business acumen. High level of project management and cross-functional collaboration skills, with the ability to build relationships and trust across the organization. Ability to drive change and engagement. · Demonstrates consistently good communication and interpersonal skills with colleagues, management and clients. Strong stakeholder management skills internally and externally, with ability to build relationships, resolve conflict, navigate through challenges and influence outcomes. A minimum of 3 years CLIA lab experience for genetic testing. Scientific experiences in genomics, proteomics, and precision medicine with proof of publications. Expert experiences in NGS pipelines design and development for germline and cancer variant detections with DNA and RNA panel, WES and WGS. Liquid biopsy and metagenomic bioinformatics pipeline development experiences. Applied machine learning and other AI technology in large scale of biological data analysis. Ideally, candidates will have the following technical experience: o AWS Engineering: 4 years o HPC and Linux: 8 years o Python Programing: 8+ years o Web Development: 3+ years · Strong Python programming skills including experiences with Pandas, Numpy, and machine learning functions. · PostgreSQL and MySQL databases, data modeling and database design, data ETL (Extraction, Transformation, and Loading) skills, SQL, and other data and database skills. Good software development practices, including code management using Git, JIRA, Confluence. · Experiences with workflow management tools such as Snakemake, Nextflow and WDL (Workflow Description Language) Strong organization skills, with attention to priorities, effectively meeting deadlines and responding in a timely manner. Ability to prioritize tasks and to delegate them when appropriate. Able to be site based in Piscataway, New Jersey, minimum 3 days per week. Salary range $180,000 to $230,000 plus bonus plan. Salary level will be reflective of qualifications, skills and experience. Sampled is an Equal Opportunity / Affirmative Action Employer (M/F/Disabled/Veteran)

Job DescriptionDescription: Setup Configuration Analyst We are looking for a skilled and highly motivated person to join our Setup/Updates team as an entry level Setup Configuration Analyst. The primary responsibility of this role is to remotely perform scheduled setup of hardware and software for customers. As a Setup Configuration Analyst, you will work closely with our implementation/project management team as well as with customers to complete the assigned tasks. The ideal candidate should be detailed orientated, be able to work independently, possess the ability to work effectively with co-workers and customers, and exhibit outstanding customer service skills. RESPONSIBILITIES: - Remotely perform setup of POS system hardware and software components. - Complete assigned tasks accurately and in a timely manner. - Provide status updates of assigned tasks to customer and project manager. - Escalate issues to the technical support team, project manager, development team and department manager as necessary. - Create/update department documentation, provide feedback to department manager. SKILL REQUIREMENTS: - Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience - SQL programming and relational database knowledge - Basic networking and client/server system architecture knowledge - Strong oral and written communication skills - Flexibility to work outside normal hours as needed - Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred - Experience with using retail software or providing technical support in small/medium business applications is a plus Flexible Work Place/Hours Benefits include Medical, 401(K), Vacation/Sick leave, Life Insurance, FSA. Optional Dental and Eye Care Coverage Available Requirements: SKILL REQUIREMENTS: - Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience - SQL programming and relational database knowledge - Basic networking and client/server system architecture knowledge - Strong oral and written communication skills - Flexibility to work outside normal hours as needed - Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred - Experience with using retail software or providing technical support in small/medium business applications is a plus

Job Description The Senior Software Developer will be responsible for developing, testing, documenting, and maintaining new and existing software that meets the company's specifications and goals. He or she will work directly with senior managers and other team members on the vision and progress of software and implementation projects. The Senior Software Developer will have extensive knowledge of the .Net framework, including the entire Framework Class Library. The Senior Software Developer must be able to work well in a small team environment and also independently. The Senior Software Developer will be able to integrate other programming languages into the systems to ensure seamless functionality. He or she will troubleshoot and develop solutions to evolving challenges and maintain a healthy curiosity about new technology and innovations. Responsibilities • The Senior Software Developer will have a strong knowledge of software architecture design patterns and should be able to recommend best practices for software development., • The Senior Software Developer will have strong knowledge of the entire Project Lifecycle with the ability to establish deadlines, work within them and deliver high-quality results within budget., • The Senior Software Developer will work closely with senior management and other team members to brainstorm solutions to bugs, technological weaknesses, and security issues., • The Senior Software Developer must remain up to date on the latest software changes and adapt programming to them. Qualifications • A bachelor's degree in computer science is preferable., • At least 10 years of Experience in the development of MV* types of applications and a thorough knowledge of the .NET framework, • Experience developing Restful web services using Web API and .Net Core, • Experience with developing web applications using C#, ASP.NET, JavaScript and Object-Oriented Technologies., • Experience developing Single Page Applications (SPA) using Angular 7.0/+, • Experience using front-end technologies such as HTML, CSS, jQuery, and TypeScript., • Knowledge of Microsoft Azure DevOps, logical apps, app services are a plus., • Prior experience of Microsoft Azure Server less technologies is a Plus., • Knowledge of No-SQL Databases is a plus., • Excellent written and oral communication skills., • Must function well under deadline pressure., • Must be detail-oriented., • Must have experience mentoring other Junior developers in the team., • Must have excellent analytical and problem-solving skills as well as the ability to mentor Junior developers.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. And for years, HORIBA Scientific’s OSIS division has been the preferred, reliable and consistent supplier of OEM spectroscopy components throughout the world … offering a complete range of OEM imaging miniature spectrographs and spectrometers along with CCD, Photodiode array (CMOS) and InGaAs detectors that operate from the UV through to the NIR. Our high reliability products and know-how are leveraged in a wide range of high-tech industries such as: Medical, Semiconductor, Pharmaceutical and Biotech to name a few. Presently, our HORIBA Scientific OSIS Division is searching for an experienced Lead Test Engineer for our North American operation located in Piscataway, New Jersey.The ideal candidate will possess a strong and proven test and measurement background for volume production validation of all electronic circuit boards incorporated into our analytical instruments and light detecting systems involving CCDs, PDAs, InGaAs, and CMOS sensors and related to both spectroscopy and imaging applications.If you are a self-motivated individual with a passion for your work that has garnered success in leading and contributing to team-oriented product development efforts, please keep reading and visit our corporate website to learn more Qualifications: • Advanced degree preferred in electrical engineering or computer engineering with 7+ years of directly related experience., • Minimum of a BSEE degree with 10+ years of directly related experience., • Will accept 15+ years of equivalent engineering design experience associated with test and validation of electronic circuit boards for data acquisition products and/or analytical instruments requiring a high level of field-deployed reliability. Responsibilities: • Develop the test methods and procedures needed to transition products from design into volume manufacturing., • Design accurate test circuits to validate functional performance of end-product detector/camera electronic board assemblies incorporating low-noise analog, power, and high-speed digital circuitry and interfaces., • Design, document, and maintain test fixtures for a volume electronic board turnkey manufacturing environment., • Collaborate with the internal design team and external contract MFG to identify, define, and resolve test issues., • Analyze and interpret test results to identify design and/or test-related problems. Requirements: • Solid understanding of electrical engineering principles in both analog and digital circuits, • Familiarity with low-noise analog and mixed-signal circuits involving op-amps, voltage references, LDOs, DACs, ADCs, and discrete semiconductors., • Demonstrated proficiency in circuit design for test and validation, • Experience with circuit modeling and simulation techniques, • Ability to guide and oversee PCB CAD designers for test fixture board design and development, • Familiarity with test equipment, including oscilloscopes, DVMs, power supplies, and Function Generators, • Sound test & troubleshooting skills., • Demonstrated technical leadership and management skills., • Strong problem-solving, communication, and interpersonal skills. Preferred: • Testing knowledge of electronic boards used in CCD/CMOS detector/camera products, • Experience testing densely populated surface mount electronic boards, • Background in LabVIEW programming a plus HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please email Jo Brodbeck or call (248) 925-1012 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Sr. Application Engineer, Alternative Fuels and Raw Materials, CLP/FPP (AFR Application Engineer) is a multifaceted role requiring an in-depth understanding of BEUMER products and applications for alternative fuels and raw materials handling in the cement and other applicable industries. This position is responsible for analyzing customer requirements and developing innovative solutions. The Sr. AFR Application Engineer is responsible for supporting the Sales team in developing the best technical solutions as per the customers´ individual requirements to successfully turn opportunities into orders. During the project execution the candidate will be responsible for the application engineering while ensuring local standards and regulations will be met. The Sr. AFR Application Engineer will serve as the regional AFR technical expert in the North American region and closely collaborate with BEUMER´s technical center of competence in the Czech Republic as he will be a member of BEUMER´s global technical AFR team. Key Responsibilities: Subject Matter Expertise: • Serve as an expert in BEUMER products and applications for alternative fuels and raw materials handling, • Be part of BEUMER´s global AFR specialist team, • Manage the center of competence and supporting departments on the specific opportunity or project to support regional Sales and Project Management, • Collaborate with regional and global Sales and tendering to provide unique and highly competitive technical solutions and applications to the North American customers, • Ensure that local requirements / standards are being implemented in BEUMER´s regional offering, • Serve as the primary technical point of contact for customers, providing pre-sales and post-sales support throughout the sales process., • Support regional project management during project execution on all relevant application engineering tasks, • Manage external vendors / engineering companies during Sales and Tendering as well as project management phase, • Support BEUMER procurement with technical documentation / requirements for RFQs and purchase orders, • Manage external 3rd party engineering companies on engineering tasks as e.g. local PE stamping, fire-fighting concepts etc., • Produce / manage preparation of technical documents, including proposals, process flows, user manuals, and application notes The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Key Requirements and Professional Attributes: • Bachelor's degree in Industrial, Mechanical, or Electrical Engineering, • 5 - 8 years of experience in technical sales or engineering, • Strong time management and attention to detail, • Excellent written and verbal communication skills, • High computer literacy in MS Office Suite, • Proficiency in 2D and 3D modeling with preferred experience in AutoCAD and SolidEdge, • Strong mathematical, analytical, and problem-solving skills, • Active listening for customer satisfaction and technical insight, • Preferred experience automated systems, and MS Excel/VBA programming, • Ability to set and meet goals, care for others, and work collaboratively in a team., • Ability to travel as per business needs. Estimated travel is 10-20%. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility Are you a seasoned engineering professional with a passion for automation and innovation? As a Senior Controls Engineer at BEUMER Group, you will lead the design, development, and implementation of advanced control systems for high-speed sortation and conveyors-based material handling solutions. This strategic and hands-on role requires deep technical expertise, leadership capabilities, and a collaborative mindset to drive excellence in fulfilment automation. Responsibilities • Lead the design and programming of machine controls for BEUMER high-speed sortation systems., • Architect scalable and modular PLC and HMI solutions tailored to customer specifications., • Oversee hardware selection, I/O mapping, and control logic development across multiple platforms., • Collaborate cross-functionally with electrical, mechanical, and software engineering teams., • Mentor junior engineers and provide technical leadership throughout project lifecycles., • Conduct system emulation and validation testing to ensure performance and reliability., • Manage on-site commissioning and troubleshoot complex system behaviors., • Develop and maintain comprehensive documentation, standards, and training materials., • Drive continuous improvement initiatives and contribute to R&D efforts. Requirements/Skills and Abilities: Education & Experience: • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or related field., • 10+ years of experience in controls engineering, preferably in the material handling or automation industry., • Advanced proficiency in programming Allen-Bradley and/or Siemens PLCs., • Expertise in SCADA systems, especially Ignition platform development and integration., • Strong understanding of industrial communication protocols and industrial networks (Ethernet/IP, Profibus, ProfiNet etc.), • Experience with safety systems, motion control, and robotic integration is a plus., • Excellent communication and leadership skills., • Strong analytical and problem-solving abilities., • Ability to manage multiple priorities and mentor team members., • Willingness to travel nationally and internationally up to 30% for project execution. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Sales Project Manager plays a crucial and multifaceted role, requiring a deep understanding of BEUMER products and applications. As a senior position, the Sales Project Manager serves as the primary liaison between the customer and BEUMER teams, ensuring the seamless coordination of techno-commercial activities. They collaborate closely with Sales, Systems Engineering, Operations, and Software/Controls departments to align system designs, produce comprehensive technical documents, and develop estimates and proposals—all while actively engaging with clients. After the sale, the Sales Project Manager facilitates a smooth technical and commercial handover from the sales team to operations. Key Responsibilities: Subject Matter Expertise: • Become an expert in BEUMER products and applications., • Understand customer requirements and business objectives and recommend appropriate products and solutions to meet their needs., • Analyze customer requirements to identify system design needs., • Support Systems Engineering Team to design end-to-end logistics solutions, including conveyor systems, sortation systems solutions using 2D and 3D CAD., • Analyze logistics workflows and processes to identify inefficiencies and bottlenecks, proposing optimizations and automation opportunities to improve operational efficiency and reduce costs., • Support the team to calculate throughput, performance, functionalities etc. of the proposed solutions and compare them against customer goals/objectives., • Lead pre-sales collaboration efforts with Sales, Systems Engineering, Operations and Software/Controls departments to design and develop robust system solutions., • Serve as the primary senior technical & commercial point of contact for customers, offering expert pre-sales and post-sales support., • Coordinate with cross-functional teams, including software developers, project managers, and operations staff, to ensure successful proposal development., • Create technical and commercial presentations for the sales team., • Ensure sales team is well supported with the technical and commercial topics., • Act as customer's representative ensuring smooth coordination and achievement of customer goals., • Stay informed about industry trends, best practices, and emerging technologies in logistic systems and supply chain management. Key Requirements and Professional Attributes: • Bachelor's degree in Industrial, Mechanical, or Electrical Engineering (Master's degree preferred) with project management skills, • 5+ years of experience in technical sales or systems engineering, with a focus on warehouse automation, • Proven experience in leading technical projects and teams., • Strong time management and attention to detail., • Excellent written and verbal communication skills., • High computer literacy in MS Office Suite., • Familiarity with 2D and 3D modeling like AutoCAD and SolidEdge., • Exceptional mathematical, analytical, and problem-solving skills., • Strong active listening skills for customer satisfaction and technical insight., • Preferred experience with automated systems and MS Excel/VBA programming., • Demonstrated ability to set and meet goals, work collaboratively, and care for team members. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionOverview We are seeking a talented Automation Engineer to join our dynamic team in Sayreville, NJ. In this role, you will be responsible for designing, implementing, and maintaining automated systems that enhance our operational efficiency. If you are passionate about technology and innovation, and enjoy solving complex problems, we want to hear from you! Responsibilities • Design and develop automated systems and processes to improve production efficiency., • Collaborate with cross-functional teams to identify automation opportunities and requirements., • Conduct testing and validation of automated solutions to ensure reliability and performance., • Monitor and troubleshoot automation systems to minimize downtime and optimize performance., • Document automation processes and provide training to team members on new systems., • Stay updated on industry trends and emerging technologies to continuously enhance automation strategies. Qualifications, • Bachelor’s degree in Engineering, Computer Science, or a related field., • Proven experience as an Automation Engineer or similar role., • Strong knowledge of automation tools and programming languages (e.g., Python, Java, C#)., • Experience with PLCs, SCADA systems, and industrial automation technologies., • Excellent problem-solving skills and attention to detail., • PLC Troubleshooting Skills, • Industrial and Manufacturing Engineering, • Troubleshooting Skills, • Troubleshooting Industrial Automation Equipment, • PLC Programming Experience, • Programmable Logic Controller (PLC) (Allen Bradley, Siemens)

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Test Manager combines expertise in PLC-based machine controls programming, automation technology, and system testing with a strong focus on system performance validation and stakeholder coordination within the material handling industry. The position requires a highly skilled professional capable of designing, programming, and validating machine controls systems, ensuring compliance with customer requirements, and leading machine controls development and commissioning activities, ensuring successful project execution. Strong technical, organizational, and communication skills are essential, along with the ability to solve complex engineering challenges independently. Machine Controls & Automation: • Design and program machine controls systems for BEUMER sorters and conveyors, using base machine controls code., • Develop and optimize PLC programs with a focus on process and performance data collection, • Work with electrical engineering to define I/O networks and addressing., • Plan, measure, and report progress on commissioning and related testing phases, ensuring compliance with functional design specifications., • Validate system performance and confirm that all commissioning documents/check-sheets are properly completed., • Conduct customer acceptance testing and facilitate the handover to customer support/hotline, • Work with System Sales during the proposal phase of the project to ensure adequate resources and time allocation, taking into consideration contractual system acceptance criteria, • Liaise with management on daily tests and operations to guarantee timely project execution., • Attend and represent BEUMER in commissioning meetings with key stakeholders., • Supporting the project managers in building the program of work and resource allocation to align with project objectives., • Measure and report discrepancies between commissioning progress and functional design requirements., • Request and coordinate service interruptions with the client as needed., • Lead small to mid-size controls projects, managing a team of engineers., • Prepare documentation following BEUMER philosophy of testing (L5..L1) Requirements & Skills: • Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or related field., • Must have a minimum of 10 years of experience in machine control programming, system testing, and commissioning., • Strong knowledge of automation technology, electrical components, and machine control concepts., • Ability to evaluate engineering problems and develop solutions independently., • Experience with testing methodologies, commissioning processes, and troubleshooting techniques., • Excellent time management, attention to detail, and ability to learn quickly., • Strong communication skills (verbal and written)., • Ability to work in a team environment and lead engineering projects., • Capacity to train and mentor junior engineers and customer personnel., • Professional, positive, and energetic attitude., • Willingness to travel nationally and internationally for project execution and commissioning activities up to 50%. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. We are seeking a service-oriented SCADA Services Engineer with strong problem-solving abilities, excellent customer-facing skills, and proven hands-on experience supporting, maintaining, troubleshooting, and upgrading Supervisory Control and Data Acquisition (SCADA) systems and their underlying PLCs and control panels. In this role you will be the go-to technical expert for a diverse installed base of SCADA systems including Inductive Automation (Ignition), Rockwell Automation (FactoryTalk), Wonderware, iFix, VTSCADA and Allen-Bradley PLC platforms. Day-to-day responsibilities include remote and on-site troubleshooting, break/fix support, system optimization, patch management, and implementing upgrades and enhancements on existing systems across projects of varying size and complexity. This is a customer-facing, service-focused position that requires a proactive mindset: anticipating issues before they escalate, resolving problems efficiently, and maximizing system uptime and performance while making the best use of available resources. You will regularly interact with end-users, plant operators, and internal teams to diagnose issues, explain technical concepts clearly, and deliver sustainable solutions. Who are we looking for: The successful candidate will join a strong team of motivated professionals who provide ongoing support and lifecycle services for municipal and industrial water and wastewater clients. You will be the primary technical resource for service contracts, maintenance agreements, and post-implementation support of medium to large SCADA installations (both standalone and multidisciplinary systems). Strong communication skills are essential, as you will interface daily with operators, plant managers, IT/OT teams, and other stakeholders. Ideal candidates are eager to deepen their expertise in supported platforms and expand into related areas such as industrial networking and OT cybersecurity. Offering Flexible Remote/Hybrid Work/Onsite Schedule: Hybrid work schedule (consisting of office, remote, and onsite, pending project needs) Travel & Physical Requirements: This position involves regular travel to client facilities (typically within driving distance) for on-site troubleshooting, preventive maintenance, system upgrades, emergency response, and scheduled service visits. Regional travel up to 50–70% (mostly day trips), with occasional overnight stays required depending on call-out needs and multi-day service work. • Must be physically able to lift and carry 40 lbs repeatedly - Comfortable working from heights (ladders, scissor lifts, platforms) and in confined spaces - Able to safely work on live control panels while wearing proper arc flash PPE and following NFPA 70E protocols - Candidate must maintain a valid driver’s license with no major infractions - Candidate must maintain a valid REAL ID driver’s license or other TSA-approved identificationWhat you will be doing at Woodard & Curran: • Rapidly diagnose and resolve SCADA, HMI, historian, PLC, network, and process-control-related issues in live production environments at municipal and industrial water/wastewater facilities, • Perform on-site and remote troubleshooting of SCADA communications, control system faults, instrumentation, and automation problems, • Maintain, repair, and support existing Control Panels, PLCs (primarily Allen-Bradley), SCADA servers, workstations, and associated infrastructure, • Support and execute field upgrades, migrations, expansions, minor updates, patches, and fixes on live systems while minimizing plant downtime, • Perform routine system health checks, backups, disaster recovery testing, cybersecurity updates, and preventive maintenance activities, • Remotely monitor SCADA assets and infrastructure across multiple facilities to proactively identify service degradation, maintenance needs, or potential failures, • Manage SCADA user accounts, permissions, access controls, and security settings in compliance with client and cybersecurity requirements, • Respond to emergency situations, provide 24/7 on-call support (rotational), and participate in rapid-response fieldwork when required, • Thoroughly document all work including service tickets, root-cause analysis reports, as-built drawings, infrastructure inventories, and system changes, • Collaborate closely with Operations, Maintenance, Engineering, Administrative teams, project engineers, technical managers, and account managers to ensure long-term system reliability and client satisfaction, • Work within defined service-level agreements (SLAs), maintenance contracts, budgets, and schedules, • Ability to work remotely from home or local facility while maintaining high availability for remote support and occasional site visitsWhat you will need to succeed:, • Minimum of 5 years of experience in Control System Design, PLC Programming, and SCADA Development, • Experience with Ethernet IP and network switches., • Skilled in modifying HMIs and tuning PID loops., • Strong understanding of industrial power design (medium/low voltage)., • Ability to read and interpret P&IDs and wiring diagrams., • Experience installing and maintaining electrical components and systems., • Knowledge of safety protocols and hazard recognition., • Experience with Allen-Bradley PLC hardware and software (other PLC experience is a bonus)., • Experience with Allen-Bradley FactoryTalk, Schneider Wonderware, Ignition, GE Proficy iFix HMI software (other HMI package experience is a bonus)., • Experience configuring and developing graphics for OITs such as Allen-Bradley PanelView and Automation Direct C-More., • Experience with automated reporting software (such as SyTech’s XLReporter and HachWims);, • Hands-on experience configuring, interfacing with, and troubleshooting instrumentation found in the water and wastewater industry., • Associate or Bachelor’s degree in a related field is preferred., • Strong electrical and mechanical aptitude., • Experience with Microsoft Office suite (Teams, Word, Excel, PowerPoint)., • Computer networking experience (hardware and configuration) is a bonus, • Experience in higher programming languages (VB, C++, Java, Python) is a bonus. Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Vision System Technician About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: The Vision System Technician will work with Manufacturing and Engineering to implement, maintain and improve all equipment using vision system technology for inspecting and verifying product at each facility. Key Responsibilities: • Support all machines operations with vision system., • Attention to detail in regards to specifications, graphics and color when setting up the vision system., • Work with Operators and Leads to ensure the process is being followed., • Working with and guiding Card Finishing Technicians with vision adjustments., • Overseeing vision files to ensure they are optimized., • Organize vision files with a correct naming convention., • Update pass/fail criteria when getting false positives or vice versa., • First in line to troubleshoot and resolve vision system issues in production., • Check machines status against standards., • Independently research a specific problem in production by gathering data., • Programming new products with precise search areas for inspection and knockout areas to omit., • Special requests and prototyping. May be required to perform special assignments and prototyping Other Important Responsibilities: • Timely Corrective Action response and resolution to relevant project situations., • Engage and support company-wide Safety and Cleanliness programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • Minimum two (2) years working in a manufacturing environment., • High School Diploma or GED required., • Excellent communication skills, both oral and written., • Strong attention to detail and ability to self-check own work., • Task oriented, excellent organizational skills, ability to prioritize work load. Excellent time management skills., • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances. Strong team minded approach., • Professional demeanor, sensitive to customer needs., • Self-motivated, creative and innovative. Strong "can do" attitude., • Conceptual Thinking – Ability to think in terms of abstract ideas., • Excellent problem-solving skills, with the ability to focus on issues that need investigation, collecting data, analyze and make recommendations to correct issues., • Proficient in data gathering and analysis. Strong analytical mindset., • High level of computer literacy including working knowledge of Microsoft Office applications and Outlook., • Experience with measurement devices, such as calipers and micrometers., • Works efficiently and calmly in a fast paced, production work environment., • High energy and strong work ethics. Can multi-task effectively., • Coachable and eager to learn new tools e.g. Laser technology, Minitab, etc., • Ability to accept responsibility and account for his/her actions. Physical requirements and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Our client is seeking an experienced Journeyman Electrician with extensive hands‐on experience in the installation, alteration, addition, and repair of electrical systems, including conduit, conductors, materials, and equipment within the electrical construction industry. Candidates must be comfortable working with minimal supervision, possess a strong work ethic, and bring a team‐oriented mindset. This is an opportunity to join a company that has been in business for over 39 years, earning an exceptional reputation in the commercial HVAC and electrical industry, trusted by Fortune 500 clients. Their success is built on the quality of their work, the loyalty of their employees, and a culture that values transparency, growth, and continuous improvement. What You’ll Do • Travel to multiple project locations daily as required, • Complete electrical installations in accordance with established procedures and electrical code, • Perform additional duties as needed to maintain equipment and support field operations, • Follow all company and customer safety policies and procedures, • Maintain clean, safe, and organized work areas before, during, and after service What We’re Looking For • Minimum 4 years of hands‐on electrical experience (no entry‐level or residential‐only applicants), • Journeyman/Wireman certification or equivalent, • Strong functional knowledge of electrical trade practices, materials, and processes, • Experience with design, installation, and maintenance of electrical instruments, apparatus, and equipment, • Safety‐minded, with OSHA certification and strong knowledge of safety regulations, • Scaffold/Lift operator certification, • Ability to excel in a dynamic, fast‐paced environment, • Professional demeanor, strong communication skills, and a positive attitude, • High School diploma or GED, • Valid New Jersey driver’s license, • Punctual, dependable, and able to manage a daily schedule with multiple appointments, • Strong electrical skills with the ability to think outside the box, • Experience with:, • New and retrofit LED lighting installations (commercial offices, data centers, industrial plants), • Automatic temperature control wiring and devices, • Opportunities to train on control and alarm point programming, • Basic writing and computer skills; strong customer service skills Working Conditions • Pushing, pulling, lifting, and carrying equipment (up to 75 lbs), • Walking, standing, stooping, and climbing for extended periods, • Working from ladders and staging, • Exposure to weather, dust, noise, heat, cold, lubricants, and chemicals Job Type: Full‐time Drug‐free workplace — pre‐employment drug testing required Company Benefits • Competitive salary based on experience, • Vacation Days, • Sick Days, • Paid Holidays, • Health Care, • Dental Plan, • Vision Insurance, • Matching 401(k), • Company‐issued cell phone, • Company uniforms, • EZ‐Pass provided, • Technician training (in‐house & school‐based), • Company vehicle (for eligible employees)

Job Description POSITION SUMMARY Sunbird (), an established leader in Data Center Infrastructure Management, is looking for a Project Manager to support one of our engineering teams. Our award-winning web-based solutions help our customers understand and manage energy consumption, environmental conditions, and assets in their facilities. Software Project Manager responsibilities include working with Product management team to determine and define project scope and objectives, providing project status updates, and ensuring project stays on schedule and adheres to the deadlines. ESSENTIAL DUTIES AND RESPONSIBILITIES Core responsibilities of the software project manager include but are not limited to: • Work with Product management team to determine and define project scope and objectives., • Act as scrum master for daily standup meetings. Lead other meetings as needed., • Develop and manage a detailed project schedule and work plan., • Ensure project stays on schedule and adheres to the deadlines., • Provide project updates on a consistent basis to various stakeholders about strategy, adjustments, and progress., • Utilize industry best practices, techniques, and standards throughout entire project execution., • Monitor progress and make adjustments as needed., • Measure project performance to identify areas for improvement., • Bachelor's degree in computer science, business, or a related field, • 2-3 years of project management and related experience, • Familiar with Agile software development process and scrum master experience, • Proven ability to solve problems creatively., • Strong familiarity with project management software tools (JIRA), methodologies, and best practices, • Experience seeing projects through the full life cycle., • Excellent analytical skills, • Strong interpersonal skills and extremely resourceful, • Proven ability to complete projects according to outlined scope, budget, and timeline · PMP or CSM certifications · Hands on python programming experience ABOUT SUNBIRD · We are all about delighting our clients and live/breathe the end client/user experience. · We have amazing PTO Policy that allows you to take care of yourself and your family. · We offer medical, dental, vision and life insurance to employees. · We believe in collaboration, teamwork, creativity and taking initiative. Interested? Read on for additional details about this opportunity to join our amazing team! Sunbird is an EEO/AA/ADA/Veterans employer. Powered by JazzHR PhPzptiGBY

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed