Trabajos computer programming en New Brunswick, New JerseyCrear alertas

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed

Job Description Seeking an experienced Journeyman Electrician (Foreman) with extensive hands‐on experience in the installation, alteration, addition, and repair of electrical systems, including conduit, conductors, materials, and equipment within the electrical construction industry. Candidates must be comfortable working with minimal supervision, possess a strong work ethic, and bring a team‐oriented mindset. Ability to lead a small team and Project This is an opportunity to join a company that has been in business for over 39 years, earning an exceptional reputation in the commercial HVAC and electrical industry, trusted by Fortune 500 clients. Their success is built on the quality of their work, the loyalty of their employees, and a culture that values transparency, growth, and continuous improvement. What You’ll Do • Travel to multiple project locations daily as required, • Complete electrical installations in accordance with established procedures and electrical code, • Perform additional duties as needed to maintain equipment and support field operations, • Follow all company and customer safety policies and procedures, • Maintain clean, safe, and organized work areas before, during, and after service What We’re Looking For • Minimum 6 years of hands‐on electrical experience (no entry‐level or residential‐only applicants), • Journeyman/Wireman certification or equivalent, • Strong functional knowledge of electrical trade practices, materials, and processes, • Experience with design, installation, and maintenance of electrical instruments, apparatus, and equipment, • Safety‐minded, with OSHA certification and strong knowledge of safety regulations, • Scaffold/Lift operator certification, • Ability to excel in a dynamic, fast‐paced environment, • Professional demeanor, strong communication skills, and a positive attitude, • High School diploma or GED, • Valid New Jersey driver’s license, • Punctual, dependable, and able to manage a daily schedule with multiple appointments, • Strong electrical skills with the ability to think outside the box, • Experience with:, • New and retrofit LED lighting installations (commercial offices, data centers, industrial plants), • Automatic temperature control wiring and devices, • Opportunities to train on control and alarm point programming, • Basic writing and computer skills; strong customer service skills Working Conditions • Pushing, pulling, lifting, and carrying equipment (up to 75 lbs), • Walking, standing, stooping, and climbing for extended periods, • Working from ladders and staging, • Exposure to weather, dust, noise, heat, cold, lubricants, and chemicals Job Type: Full‐time Drug‐free workplace — pre‐employment drug testing required Company Benefits • Competitive salary based on experience, • Vacation Days, • Sick Days, • Paid Holidays, • Health Care, • Dental Plan, • Vision Insurance, • Matching 401(k), • Company‐issued cell phone, • Company uniforms, • EZ‐Pass provided, • Technician training (in‐house & school‐based), • Company vehicle (for eligible employees)#ZR

Job Description Our client is seeking an experienced Journeyman Electrician with extensive hands‐on experience in the installation, alteration, addition, and repair of electrical systems, including conduit, conductors, materials, and equipment within the electrical construction industry. Candidates must be comfortable working with minimal supervision, possess a strong work ethic, and bring a team‐oriented mindset. This is an opportunity to join a company that has been in business for over 39 years, earning an exceptional reputation in the commercial HVAC and electrical industry, trusted by Fortune 500 clients. Their success is built on the quality of their work, the loyalty of their employees, and a culture that values transparency, growth, and continuous improvement. What You’ll Do • Travel to multiple project locations daily as required, • Complete electrical installations in accordance with established procedures and electrical code, • Perform additional duties as needed to maintain equipment and support field operations, • Follow all company and customer safety policies and procedures, • Maintain clean, safe, and organized work areas before, during, and after service What We’re Looking For • Minimum 4 years of hands‐on electrical experience (no entry‐level or residential‐only applicants), • Journeyman/Wireman certification or equivalent, • Strong functional knowledge of electrical trade practices, materials, and processes, • Experience with design, installation, and maintenance of electrical instruments, apparatus, and equipment, • Safety‐minded, with OSHA certification and strong knowledge of safety regulations, • Scaffold/Lift operator certification, • Ability to excel in a dynamic, fast‐paced environment, • Professional demeanor, strong communication skills, and a positive attitude, • High School diploma or GED, • Valid New Jersey driver’s license, • Punctual, dependable, and able to manage a daily schedule with multiple appointments, • Strong electrical skills with the ability to think outside the box, • Experience with:, • New and retrofit LED lighting installations (commercial offices, data centers, industrial plants), • Automatic temperature control wiring and devices, • Opportunities to train on control and alarm point programming, • Basic writing and computer skills; strong customer service skills Working Conditions • Pushing, pulling, lifting, and carrying equipment (up to 75 lbs), • Walking, standing, stooping, and climbing for extended periods, • Working from ladders and staging, • Exposure to weather, dust, noise, heat, cold, lubricants, and chemicals Job Type: Full‐time Drug‐free workplace — pre‐employment drug testing required Company Benefits • Competitive salary based on experience, • Vacation Days, • Sick Days, • Paid Holidays, • Health Care, • Dental Plan, • Vision Insurance, • Matching 401(k), • Company‐issued cell phone, • Company uniforms, • EZ‐Pass provided, • Technician training (in‐house & school‐based), • Company vehicle (for eligible employees)#ZR

Job Description We are seeking an experienced Journeyman Electrician (Foreman) with extensive hands‐on experience in the installation, alteration, addition, and repair of electrical systems. This role requires strong technical skills, the ability to work independently, and a team‐oriented mindset. The ideal candidate will also have the ability to lead a small team and manage projects effectively. About the Company A company with over 39 years in business, earning an exceptional reputation in the commercial HVAC and electrical industry. Trusted by Fortune 500 clients, their success is built on quality workmanship, loyal employees, and a culture that values transparency, growth, and continuous improvement. Key Responsibilities • Travel to multiple project locations daily as required, • Complete electrical installations in accordance with procedures and electrical code, • Perform additional duties to maintain equipment and support field operations, • Follow all company and customer safety policies, • Minimum 6 years of hands‐on electrical experience (no entry‐level or residential‐only applicants), • Journeyman/Wireman certification or equivalent, • Strong knowledge of electrical trade practices, materials, and processes, • Experience with design, installation, and maintenance of electrical instruments, apparatus, and equipment, • Safety‐minded with OSHA certification and strong knowledge of safety regulations, • Scaffold/Lift operator certification, • Ability to excel in a fast‐paced environment, • Professional demeanor, strong communication skills, and positive attitude, • High School diploma or GED, • Valid New Jersey driver’s license, • Punctual, dependable, and able to manage a daily schedule with multiple appointments, • New and retrofit LED lighting installations (commercial offices, data centers, industrial plants), • Automatic temperature control wiring and devices, • Opportunities to train on control and alarm point programming, • Pushing, pulling, lifting, and carrying equipment (up to 75 lbs), • Walking, standing, stooping, and climbing for extended periods, • Working from ladders and staging, • Exposure to weather, dust, noise, heat, cold, lubricants, and chemicals, • Full‐time, permanent position, • Competitive salary based on experience, • Vacation Days, • Sick Days, • Paid Holidays, • Health Care, Dental, and Vision Insurance, • Matching 401(k), • Company‐issued cell phone, • Company uniforms, • EZ‐Pass provided, • Technician training (in‐house & school‐based), • Company vehicle (for eligible employees)

Job Description We are seeking an experienced Journeyman Electrician with extensive hands‐on experience in the installation, alteration, addition, and repair of electrical systems. This role requires strong technical skills, the ability to work independently, and a team‐oriented mindset. About the Company A company with over 39 years in business, earning an exceptional reputation in the commercial HVAC and electrical industry. Trusted by Fortune 500 clients, their success is built on quality workmanship, loyal employees, and a culture that values transparency, growth, and continuous improvement. Key Responsibilities • Travel to multiple project locations daily as required, • Complete electrical installations in accordance with procedures and electrical code, • Perform additional duties to maintain equipment and support field operations, • Follow all company and customer safety policies, • Minimum 4 years of hands‐on electrical experience (no entry‐level or residential‐only applicants), • Journeyman/Wireman certification or equivalent, • Strong knowledge of electrical trade practices, materials, and processes, • Experience with design, installation, and maintenance of electrical instruments, apparatus, and equipment, • Safety‐minded with OSHA certification and strong knowledge of safety regulations, • Scaffold/Lift operator certification, • Ability to excel in a fast‐paced environment, • Professional demeanor, strong communication skills, and positive attitude, • High School diploma or GED, • Valid New Jersey driver’s license, • Punctual, dependable, and able to manage a daily schedule with multiple appointments, • New and retrofit LED lighting installations (commercial offices, data centers, industrial plants), • Automatic temperature control wiring and devices, • Opportunities to train on control and alarm point programming, • Pushing, pulling, lifting, and carrying equipment (up to 75 lbs), • Walking, standing, stooping, and climbing for extended periods, • Working from ladders and staging, • Exposure to weather, dust, noise, heat, cold, lubricants, and chemicals, • Full‐time, permanent position, • Competitive salary based on experience, • Vacation Days, • Sick Days, • Paid Holidays, • Health Care, Dental, and Vision Insurance, • Matching 401(k), • Company‐issued cell phone, • Company uniforms, • EZ‐Pass provided, • Technician training (in‐house & school‐based), • Company vehicle (for eligible employees)

Job DescriptionAs a Sr. Product Architect, you will act as the bridge between data-center domain knowledge, user experience needs, and software architecture. You will research data center technologies, dissect complex concepts, design features, design UI/UX and write high-quality requirements that guide our development team. This role is ideal for someone who enjoys tinkering, reasoning through challenging problems, and understanding how things work end-to-end. Key Responsibilities • Understand deeply how our DCIM software system is architected and how components interact., • Contribute to solution design and feature architecture; identify and document thorough functional and non-functional requirements., • Design new requirements with all existing requirements in mind to avoid conflicts and spot unforeseen issues., • Think critically and logically to solve multidimensional and intricate problems., • Research new technologies, data-center equipment, and protocols to design new features or improve existing capabilities., • Translate complex engineering and data-center concepts into clear, actionable requirements for developers., • Work closely with product, UX/UI, and development teams to ensure features are logical, intuitive, and visually clean., • Create nearly pixel-perfect UI Mockups to ensure clarity, simplicity, and usability., • Understand the SQL database architecture such that proposed database changes maintain simplicity and performance., • Participate in troubleshooting, validating workflows, and improving system logic., • Support quality assurance by validating software behavior matches design intent.Required Skills & Qualifications, • Bachelor’s degree in Electrical Engineering, Computer Engineering, Systems Engineering, or equivalent hands-on experience with data center power systems and software., • Strong understanding of data center infrastructure, including servers, networking, power distribution, PDUs, UPS systems, cooling, racks, and cabling., • Solid knowledge of electricity fundamentals, including three-phase power, power calculations, loads, redundancy concepts, and electrical efficiency., • Demonstrated understanding of how software is built — from technical architecture to APIs, data models, performance, and UI considerations., • Ability to think logically and reason through highly complex, multi-layered problems., • Curiosity-driven mindset: enjoys exploring “how things work” and learning new technologies., • Experience writing detailed, clear, and actionable technical requirements or documentation., • Strong collaboration and communication skills with cross-functional teams., • Eye for clean, intuitive UI/UX, even if not a designer.Preferred Qualifications, • Prior experience with DCIM, BMS, EMS, or related infrastructure software., • Hands-on experience with electrical systems, or data-center operations., • Familiarity with REST APIs, data modeling, and protocols such as SNMP, Redfish, Modbus, MQTT, etc., • Background in feature design, system architecture, technical product management, or solution engineering., • Basic understanding of SQL and can write simple queries, • We are all about delighting our clients and live/breathe the end client/user experience, • We stock the office with soda, snacks, coffee and tea for you to refuel throughout the day, • We have amazing PTO Policy that allows you to take care of yourself and your family, • We offer medical, dental, vision and life insurance to eligible employees, • We believe in collaboration, teamwork, creativity and taking initiativeInterested? Read on for additional details about this opportunity to join our amazing team! Powered by JazzHR f9EXZwVQrW

Job Description Zone IT Solutions is seeking a skilled IBM BPM Engineer to join our team. In this role, you will be responsible for developing, implementing, and maintaining business process management (BPM) solutions using IBM BPM technology. You will work closely with clients to analyze their business requirements and deliver efficient solutions that enhance workflow processes. Requirements • Bachelor's degree in Computer Science, Information Technology, or related field., • Minimum of 3 years of experience working with IBM BPM, including process modeling and automation., • Experience in designing and implementing BPM solutions using IBM BPM Suite., • Strong understanding of business process management concepts and methodologies., • Proficiency in business process modeling tools and techniques., • Knowledge of Java, SQL, and other relevant programming languages., • Ability to work closely with stakeholders to gather requirements and translate them into technical specifications., • Experience with integrations involving APIs and web services., • Excellent problem-solving and analytical skills. About Us Zone IT Solutions is Australia based Recruitment Company. We specialize in Digital, ERP and larger IT Services. We offer flexible, efficient and collaborative solutions to any organization that requires IT, experts. Our agile, agnostic and flexible solutions will help you source the IT Expertise you need. If you are looking for new opportunities your profile at Also follow our LinkedIn page for new job opportunities and more. Zone IT Solutions is an equal opportunity employer and our recruitment process focuses on essential skills and abilities. We welcome applicants from a diverse range of backgrounds, including Aboriginal and Torres Strait Islander peoples, people from culturally and linguistically diverse (CALD) backgrounds and people with disabilities.

Job DescriptionJob Summary: The Clinical Data Scientist will serve as Aquestive’s in-house clinical data expert leading the execution of the clinical data analysis pipeline. The ideal candidate will have diverse and hands-on experience in both clinical data management and data analysis. This individual will be responsible for oversight of programming and data management activities with contract research organization (CRO) vendors in support of Phase I – Phase IV clinical trials. This role drives accountability at every possible level ensuring CROs are delivering quality data and documentation on time, on budget and to quality standards and SOPs. The Clinical Data Scientist, under minimal supervision, will also conduct in-house statistical and data analyses at individual subject-, study- and program-levels, review clinical data outputs according to internal and regulatory standards, and will work with team members (internal and external) to resolve clinical data issues proactively. Responsibilities: Primary duties and responsibilities shall include, but are not limited to, the following: • Clinical Data Management:, • Monitor data management, programming, and/or bio-statistical workflow of contracted CRO to maximize efficiency for all clinical trial data deliverables., • Collaborate with CRO and lead clinical teams in the generation/review SAPs and TLFs prepared by CRO to ensure quality and compliance with specifications., • Oversee data management-related responsibilities, including trial start-up, case report form (CRF) development, database build, edit checks, periodic reviews, etc., • Review external (third-party) data transfer agreements; consult with CRO to integrate external data into study programming process flow., • Ensure clinical data within EDC is of high quality to support lock/unlock as appropriate for statistical review, interim review, and or final database lock., • Review of SDTM and ADaM dataset specifications/datasets prepared by CRO to ensure conformity to Clinical Data Interchange Standards Consortium (CDISC) implementation guidelines and standards., • Provide/facilitate support as needed, both technical and clinical, to ensure efficient action, collaboration, and resolution of issues., • Clinical Data Analysis, Visualization and Interpretation:, • Program ad hoc statistical and data analyses, and generate presentations for data review meetings or in response to requests by clinical, medical and regulatory teams, including but not limited to manuscripts, presentations, regulatory documents, corporate documents, etc., • Maintain all relevant programming documentation for designs, scripts, and other processes., • Read, validate and execute previously generated programs to update clinical data outputs., • Participate in validation and quality checks of statistical programming and output produced both internally and externally., • Clinical Data Quality Control and Assessment:, • B.S. degree in computer science, data science, and/or scientific or related scientific discipline., • Proficient in Python., • 3 years of experience in clinical data science and data management in a biotech or pharmaceutical company, or in a contract research organization servicing the pharmaceutical industry., • Experience in development of clinical trial documents, including clinical data management plans, statistical analysis plans, statistical sections in protocol and study report, independent data monitoring committee charter and programming validation plans., • Experience working in an outsourced data management model. Vendor oversight of Data Management, SAS Programming, and/or Statistical deliverables., • Knowledge of and experience with EDC databases, CDASH/SDTM standards, medical terminology, medical coding dictionaries, and quality control processes., • Familiarity with GCP, ICH and FDA requirements as applicable for clinical data management., • Prior experience filing a BLA or NDA preferred., • Demonstrated leadership in a cross-functional team setting., • Proven ability to be innovative., • Proven ability to implement GCP guidelines., • Ability to function as a lead team member on clinical trial project teams., • Familiarity with WHODrug and MedDRA coding dictionaries., • Strong knowledge of MS Word, Excel, PowerPoint, Access and Outlook., • Must maintain a professional demeanor, as well as a pleasant manner and positive “can-do” attitude while developing and maintaining communications in a cooperative and collaborative manner with all levels across functional teams both internally and externally., • Excellent interpersonal skills with the ability to work independently and collaboratively in a dynamic team environment., • Flexibility to change priorities and be comfortable with the changing deadlines to meet organization needs when required., • Must be detail-orientated, with the ability to work on multiple projects with overlapping schedules and priorities., • Highly motivated and a self-starter; demonstrated ability to work independently, as well as in a team while exercising discretion; takes initiative to resolve problems., • Possess a blend of business and scientific knowledge, and interpersonal skills; effective communication (both orally and in writing) and excellent listening skills; strong customer service orientation. The above statements are intended to describe the general nature and level of the work being performed by colleagues assigned to this position. This is not intended to be an exhaustive list of all responsibilities, duties, and skills required. Aquestive reserves the right to make changes to the job description whenever necessary. As part of Aquestive’s employment process, final candidate will be required to complete a drug test and background check prior to employment commencing. Please Note: Aquestive is a drug-free workplace and has a drug free workplace policy in place. Aquestive provides equal employment opportunities to all colleagues and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. The Company is required to provide a reasonable estimate of the salary range for this job in certain states and cities within the United States. Final determinations with respect to salary will take into account a number of factors, which may include, but not be limited to the primary work location and the chosen candidate’s relevant skills, experience, and education.

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. We are seeking a service-oriented SCADA Services Engineer with strong problem-solving abilities, excellent customer-facing skills, and proven hands-on experience supporting, maintaining, troubleshooting, and upgrading Supervisory Control and Data Acquisition (SCADA) systems and their underlying PLCs and control panels. In this role you will be the go-to technical expert for a diverse installed base of SCADA systems including Inductive Automation (Ignition), Rockwell Automation (FactoryTalk), Wonderware, iFix, VTSCADA and Allen-Bradley PLC platforms. Day-to-day responsibilities include remote and on-site troubleshooting, break/fix support, system optimization, patch management, and implementing upgrades and enhancements on existing systems across projects of varying size and complexity. This is a customer-facing, service-focused position that requires a proactive mindset: anticipating issues before they escalate, resolving problems efficiently, and maximizing system uptime and performance while making the best use of available resources. You will regularly interact with end-users, plant operators, and internal teams to diagnose issues, explain technical concepts clearly, and deliver sustainable solutions. Who are we looking for: The successful candidate will join a strong team of motivated professionals who provide ongoing support and lifecycle services for municipal and industrial water and wastewater clients. You will be the primary technical resource for service contracts, maintenance agreements, and post-implementation support of medium to large SCADA installations (both standalone and multidisciplinary systems). Strong communication skills are essential, as you will interface daily with operators, plant managers, IT/OT teams, and other stakeholders. Ideal candidates are eager to deepen their expertise in supported platforms and expand into related areas such as industrial networking and OT cybersecurity. Offering Flexible Remote/Hybrid Work/Onsite Schedule: Hybrid work schedule (consisting of office, remote, and onsite, pending project needs) Travel & Physical Requirements: This position involves regular travel to client facilities (typically within driving distance) for on-site troubleshooting, preventive maintenance, system upgrades, emergency response, and scheduled service visits. Regional travel up to 50–70% (mostly day trips), with occasional overnight stays required depending on call-out needs and multi-day service work. • Must be physically able to lift and carry 40 lbs repeatedly - Comfortable working from heights (ladders, scissor lifts, platforms) and in confined spaces - Able to safely work on live control panels while wearing proper arc flash PPE and following NFPA 70E protocols - Candidate must maintain a valid driver’s license with no major infractions - Candidate must maintain a valid REAL ID driver’s license or other TSA-approved identificationWhat you will be doing at Woodard & Curran: • Rapidly diagnose and resolve SCADA, HMI, historian, PLC, network, and process-control-related issues in live production environments at municipal and industrial water/wastewater facilities, • Perform on-site and remote troubleshooting of SCADA communications, control system faults, instrumentation, and automation problems, • Maintain, repair, and support existing Control Panels, PLCs (primarily Allen-Bradley), SCADA servers, workstations, and associated infrastructure, • Support and execute field upgrades, migrations, expansions, minor updates, patches, and fixes on live systems while minimizing plant downtime, • Perform routine system health checks, backups, disaster recovery testing, cybersecurity updates, and preventive maintenance activities, • Remotely monitor SCADA assets and infrastructure across multiple facilities to proactively identify service degradation, maintenance needs, or potential failures, • Manage SCADA user accounts, permissions, access controls, and security settings in compliance with client and cybersecurity requirements, • Respond to emergency situations, provide 24/7 on-call support (rotational), and participate in rapid-response fieldwork when required, • Thoroughly document all work including service tickets, root-cause analysis reports, as-built drawings, infrastructure inventories, and system changes, • Collaborate closely with Operations, Maintenance, Engineering, Administrative teams, project engineers, technical managers, and account managers to ensure long-term system reliability and client satisfaction, • Work within defined service-level agreements (SLAs), maintenance contracts, budgets, and schedules, • Ability to work remotely from home or local facility while maintaining high availability for remote support and occasional site visitsWhat you will need to succeed:, • Minimum of 5 years of experience in Control System Design, PLC Programming, and SCADA Development, • Experience with Ethernet IP and network switches., • Skilled in modifying HMIs and tuning PID loops., • Strong understanding of industrial power design (medium/low voltage)., • Ability to read and interpret P&IDs and wiring diagrams., • Experience installing and maintaining electrical components and systems., • Knowledge of safety protocols and hazard recognition., • Experience with Allen-Bradley PLC hardware and software (other PLC experience is a bonus)., • Experience with Allen-Bradley FactoryTalk, Schneider Wonderware, Ignition, GE Proficy iFix HMI software (other HMI package experience is a bonus)., • Experience configuring and developing graphics for OITs such as Allen-Bradley PanelView and Automation Direct C-More., • Experience with automated reporting software (such as SyTech’s XLReporter and HachWims);, • Hands-on experience configuring, interfacing with, and troubleshooting instrumentation found in the water and wastewater industry., • Associate or Bachelor’s degree in a related field is preferred., • Strong electrical and mechanical aptitude., • Experience with Microsoft Office suite (Teams, Word, Excel, PowerPoint)., • Computer networking experience (hardware and configuration) is a bonus, • Experience in higher programming languages (VB, C++, Java, Python) is a bonus. Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Position: Updates Deployment Analyst Location: New Jersey/Remote Reports to: Gautham Rajendran – Setup/Updates Department Manager Type: Full-Time Who We Are: Celerant Technology Corp is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Iselin, New Jersey and, as well as additional offices in Georgia, California, Texas and Turks and Caicos. For more information, visit us at . Overview: The Updates Deployment Analyst will be responsible for reviewing, scheduling and performing client software updates in a timely manner. The ideal candidate will be organized and be able to maintain a productive schedule while also being detail-orientated to perform software updates accurately and reliably. The candidate should also be able to communicate clearly to clients and other internal staff members through means of emails, forms, and phone calls, escalating to the department manager as necessary. Key Responsibilities: · Review and schedule client software updates in a timely manner · Follow established processes for documentation and tracking of updates · Provide satisfactory communication with clients to guide them through the updates process · Escalate issues to the technical support team, development team, project manager and department manager as necessary · Responsible for other duties as assigned by manager to meet business needs Qualifications: · Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience · SQL programming and relational database knowledge · Ability to start work at around 7am ET and occasionally earlier as required · Ability to occasionally work late nights and weekends as required · Strong attention to detail and quality of work Preferred Qualifications: · Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred · Experience with retail software or providing technical support in small/medium business applications Bottom of Form Compensation: Competitive Salary with major growth potential, medical benefits, 401K, flexible spending account, 15 PTO days annually, optional dental/optical coverage. Salary range is $40,000-$55,000 depending on experience. Requirements: Qualifications: · Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience · SQL programming and relational database knowledge · Ability to start work at around 7am ET and occasionally earlier as required · Ability to occasionally work late nights and weekends as required · Strong attention to detail and quality of work Preferred Qualifications: · Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred · Experience with retail software or providing technical support in small/medium business applications

Job DescriptionDescription: An exciting opportunity to join the team of a progressive YMCA located in vibrant Somerset County, New Jersey. The YMCA is one of the nation’s leading nonprofit organizations dedicated to strengthening communities through youth development, healthy living and social responsibility. With a 150-year-old history, Greater Somerset County YMCA (GSCY) is a pillar of the community and has seven locations across three counties, which collectively serve upwards of 30,000 individuals. GSCY has 100 full-time and 950 part-time employees along with operating revenues to $22+ million. The Y empowers everyone—no matter who they are or where they are from. To fulfill our purpose of strengthening community for all, GSCY is committed to being an inclusive organization and leveraging our collective impact to address social inequities. To learn more about GSCY, visit our website: POSITION SUMMARY: Under the direction of the Senior Program Director, the Associate Program Director is responsible for managing activities associated with our School Age Child Care, Summer Camp and Youth Sports Program at the Franklin YMCA, including the administration of these programs, as well as the supervision of a SACC program onsite as needed to ensure that the program creates opportunities for youth development, healthy living and social responsibility. This job is fully on-site, not remote. ESSENTIAL FUNCTIONS: SACC & YOUTH SPORTS: • Supervises all branch SACC counselors and assists counselors in day to day SACC operations., • Engage in program staff hiring, training and provide continuous support and feedback., • Oversee program registrations and manage all financial aspects of the SACC program, including billing, payments, and past-due balances., • Ensure the delivery of high quality, safe, educational youth programming in a nurturing environment focusing specifically on YMCA's Core Values., • Establishes and sustains positive relationships with program participants, their families and prospective members., • Ensures all programs are continuously maintaining the guidelines for a safe, educational, social and nurturing environment as set by the YMCA and other regulatory organizations., • Assist in creating new programs and bringing new ideas to support program growth and development Responds to member and community inquires and complaints in a timely manner. CAMP: • Assist with the management of branch summer camp programs, acting as Camp Director., • Supervises all branch camp counselors and assists the counselors in the day to day camp operations., • Plan, organize and implement specific programs for summer camp. , ensuring trips are booked according to budget plans., • Assist with all camp staff hiring, training and supervision OTHER DUTIES: • Assist in fundraising by meeting annual campaign goals and organizing volunteers to lead the annual campaign community to include supporting fundraising activities and special events as necessary., • Responsible for complying with all Greater Somerset County YMCA Policies and Procedures., • Adheres and incorporates the YMCA values of caring, honesty, respect, and responsibility and educates members about the YMCA mission and goals., • Responsible for promoting programs, including developing program information for YMCA website, programming guide, social media, etc. • High school diploma or equivalent required; Associate’s degree or higher preferred, • Two to three years related experience preferred, as a coordinator or supervisor of child care programs., • Working knowledge of the State of NJ Department of Children and Families Office of Licensing preferred., • Excellent organizational skills and attention to detail.· Knowledge of office management systems and procedures., • Ability to operate general office equipment., • Excellent written and verbal communication skills., • Proficient in Microsoft Office Suite or similar software. Mission Advancement: Models and teaches the Ys values. Ensures a high level of service with a commitment to changing lives. Provides volunteers with orientation, training, development, and recognition. Cultivates relationships to support fund-raising. Collaboration: Champions inclusion activities, strategies, and initiatives. Builds relationships to create small communities. Empathetically listens and communicates for understanding when negotiating and dealing with conflict. Effectively tailors' communications to the appropriate audience. Provides staff with feedback, coaching, guidance and support. Operational Effectiveness: Provides others with frameworks for making decisions. Conducts prototypes to support the launching of programs and activities. Develops plans and manages best practices through engagement of team. Effectively creates and manages budgets. Holds staff accountable for high-quality results using a formal process to measure progress. Personal Growth: Shares new insights. Facilitates change, models adaptability and an awareness of the impact of change. Utilizes non-threatening methods to address sensitive issues and inappropriate behavior or performance. Has the functional and technical knowledge and skills required to perform well; uses best practices and demonstrates up-to-date knowledge and skills in technology. WORK ENVIRONMENT & PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Sufficient strength, agility and mobility to perform essential functions of position and to supervise program activities., • While performing the duties of this job, the employee is regularly required to use a computer for extended periods of time and be able to communicate using a computer and phone/smart device., • The employee frequently is required to sit and reach and must be able to move around the work environment., • The employee must occasionally lift and/or move up to 10 pounds., • Specific vision abilities required by this job include close vision, distance vision, and the ability to adjust., • FREE family membership to Greater Somerset County YMCA, including full access to all of our branch facilities including Bridgewater YMCA, Hillsborough YMCA, Princeton YMCA, Somerset Hills YMCA, and Somerville YMCA., • FREE nationwide membership with access to over 2,500 YMCA locations across the country, • Discounted program fees, • Paid sick leave and short-term disability insurance, • Employee Assistance Program (EAP), • Generous 12% retirement contribution to the YMCA Retirement Fund after eligibility period (no employee contribution required), • Medical and dental insurance with prescription coverage, • Vision insurance, • Flexible Spending Account for medical and/or dependent care, • 100% contribution towards life insurance and long-term disability, • Optional additional life insurance and dependent life insurance available at low rates, • 403(b) Smart Savings Plan, • Generous paid time off policy

Job Description Card Finishing Technician About CompoSecure Founded in 2000, CompoSecure (Nasdaq: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for the set-up, repair, preventative maintenance, and operation of equipment to achieve production goals with a high level of detail and accuracy. Key Responsibilities: • Primary trainer for new hires in machine operation including documenting the training., • Lead the productivity, maintenance, and quality of the Muhlbauer equipment., • Complete responsibility of machine start-up, shut down and changeover., • Understand what the expectations are of a work order., • Set up machines as required for specific jobs including new programs, as needed., • Observe machine operations to verify accuracy of machine settings while producing a top-quality product., • Detect malfunctions or out-or-tolerance conditions., • Use precision measuring instruments such as drop gauges and push testers when setting up or adjusting machines., • Inspect "first part" and inspect work pieces throughout the production run for out-or-tolerance conditions., • Ensure Preventative Maintenance is completed and spare parts inventories are maintained., • Pull required fixtures, holding devices and materials, as required., • Minor repairs of machine within capability., • Ensure all documentation is completed properly including, computer logs, maintenance logs and accountability logs. Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently., • Must be able to keep record of time spent and materials used., • Must be able to use precision measuring tools and equipment, read schematics, and is familiar with common measuring tools., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • Must maintain adequate levels of performance and motivation despite job tasks that are routine, repetitive and/or non-stimulating., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 5 years or more of relevant experience, • High School or GED Diploma required, Technical School Certification/Degree Preferred, • Ability to independently troubleshoot mechanical and electrical problems using schematics and diagnostic equipment., • Must have knowledge of mathematical skills with all units of measure, using whole numbers, common fractions and decimals, • Must be capable of programming, setting up and maintaining various equipment, • Competencies with pneumatic technology and hydraulics, • Must be able to work with limited supervision and function as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Must hold themselves accountable for doing whatever is needed to meet customer commitments, • Must be able to understand and carry out oral and written directives, • Must have the ability to work under pressure and to adhere to deadlines and to have the ability to be flexible, • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for up to 12 hours per day including the following:, • Standing for up to 12 hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Short notice, overtime and some weekend demand according to production needs CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility Are you a seasoned engineering professional with a passion for automation and innovation? As a Senior Controls Engineer at BEUMER Group, you will lead the design, development, and implementation of advanced control systems for high-speed sortation and conveyors-based material handling solutions. This strategic and hands-on role requires deep technical expertise, leadership capabilities, and a collaborative mindset to drive excellence in fulfilment automation. Responsibilities • Lead the design and programming of machine controls for BEUMER high-speed sortation systems., • Architect scalable and modular PLC and HMI solutions tailored to customer specifications., • Oversee hardware selection, I/O mapping, and control logic development across multiple platforms., • Collaborate cross-functionally with electrical, mechanical, and software engineering teams., • Mentor junior engineers and provide technical leadership throughout project lifecycles., • Conduct system emulation and validation testing to ensure performance and reliability., • Manage on-site commissioning and troubleshoot complex system behaviors., • Develop and maintain comprehensive documentation, standards, and training materials., • Drive continuous improvement initiatives and contribute to R&D efforts. Requirements/Skills and Abilities: Education & Experience: • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or related field., • 10+ years of experience in controls engineering, preferably in the material handling or automation industry., • Advanced proficiency in programming Allen-Bradley and/or Siemens PLCs., • Expertise in SCADA systems, especially Ignition platform development and integration., • Strong understanding of industrial communication protocols and industrial networks (Ethernet/IP, Profibus, ProfiNet etc.), • Experience with safety systems, motion control, and robotic integration is a plus., • Excellent communication and leadership skills., • Strong analytical and problem-solving abilities., • Ability to manage multiple priorities and mentor team members., • Willingness to travel nationally and internationally up to 30% for project execution. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. And for years, HORIBA Scientific’s OSIS division has been the preferred, reliable and consistent supplier of OEM spectroscopy components throughout the world … offering a complete range of OEM imaging miniature spectrographs and spectrometers along with CCD, Photodiode array (CMOS) and InGaAs detectors that operate from the UV through to the NIR. Our high reliability products and know-how are leveraged in a wide range of high-tech industries such as: Medical, Semiconductor, Pharmaceutical and Biotech to name a few. Presently, our HORIBA Scientific OSIS Division is searching for an experienced Lead Test Engineer for our North American operation located in Piscataway, New Jersey.The ideal candidate will possess a strong and proven test and measurement background for volume production validation of all electronic circuit boards incorporated into our analytical instruments and light detecting systems involving CCDs, PDAs, InGaAs, and CMOS sensors and related to both spectroscopy and imaging applications.If you are a self-motivated individual with a passion for your work that has garnered success in leading and contributing to team-oriented product development efforts, please keep reading and visit our corporate website to learn more Qualifications: • Advanced degree preferred in electrical engineering or computer engineering with 7+ years of directly related experience., • Minimum of a BSEE degree with 10+ years of directly related experience., • Will accept 15+ years of equivalent engineering design experience associated with test and validation of electronic circuit boards for data acquisition products and/or analytical instruments requiring a high level of field-deployed reliability. Responsibilities: • Develop the test methods and procedures needed to transition products from design into volume manufacturing., • Design accurate test circuits to validate functional performance of end-product detector/camera electronic board assemblies incorporating low-noise analog, power, and high-speed digital circuitry and interfaces., • Design, document, and maintain test fixtures for a volume electronic board turnkey manufacturing environment., • Collaborate with the internal design team and external contract MFG to identify, define, and resolve test issues., • Analyze and interpret test results to identify design and/or test-related problems. Requirements: • Solid understanding of electrical engineering principles in both analog and digital circuits, • Familiarity with low-noise analog and mixed-signal circuits involving op-amps, voltage references, LDOs, DACs, ADCs, and discrete semiconductors., • Demonstrated proficiency in circuit design for test and validation, • Experience with circuit modeling and simulation techniques, • Ability to guide and oversee PCB CAD designers for test fixture board design and development, • Familiarity with test equipment, including oscilloscopes, DVMs, power supplies, and Function Generators, • Sound test & troubleshooting skills., • Demonstrated technical leadership and management skills., • Strong problem-solving, communication, and interpersonal skills. Preferred: • Testing knowledge of electronic boards used in CCD/CMOS detector/camera products, • Experience testing densely populated surface mount electronic boards, • Background in LabVIEW programming a plus HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please email Jo Brodbeck or call (248) 925-1012 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Why Join BEUMER Group? BEUMER Group is a global leader in automated sortation solutions for e-commerce fulfillment centers. Our BG Sorter ET Tilt-Tray, BG Sorter CB Cross-Belt, BG Line Sorter, and BG Pouch System are designed to optimize performance and scalability for major e-commerce players. As a Controls Engineer II, you will contribute to the development and implementation of these state-of-the-art technologies, ensuring seamless integration with warehouse management systems and high-speed logistics operations that shape the future of online retail. Career Growth & Professional Development: At BEUMER Group, your career doesn’t just stop at Controls Engineer II—it grows with you. We foster an innovative, collaborative environment where engineers can expand their expertise through: • Ongoing mentorship and guidance from industry experts., • Advanced training in automation, machine control systems, and emerging technologies. BEUMER Group’s advanced sortation systems are transforming e-commerce fulfillment with high-speed, scalable, and cost-effective automation. As a Controls Engineer II, you’ll help integrate and optimize these solutions for some of the world’s leading e-commerce brands. Join a global leader driving efficiency and innovation in fulfillment operations. Be part of a team that's redefining digital commerce through automation excellence. Exciting Travel & Global Exposure: As part of the BEUMER team, you will gain international experience by working on high-profile projects with cutting-edge automation technologies. Whether commissioning systems across North America or collaborating with teams worldwide, you’ll develop invaluable expertise while exploring new opportunities in automation. Job Description General Responsibility Are you ready to take your engineering expertise to the next level? As a Controls Engineer II at BEUMER Group, you will play a pivotal role in designing and programming machine controls for cutting-edge high speed sortation systems that power the e-commerce industry. This hands-on position requires technical excellence, organizational skills, and strong communication abilities to ensure seamless automation and efficiency in high-speed fulfillment operations. Responsibilities: • Translate customer requirements into programmatic designs for BEUMER sorters., • Design and program operator panels and HMI systems for intuitive user interaction., • Prepare and test PLC hardware for projects, ensuring reliability and efficiency., • Collaborate with electrical engineering to define I/O networks and addressing., • Work with PC software developers to integrate machine control systems., • Conduct in-house emulation-based testing at BEUMER offices to validate system performance., • Participate in on-site commissioning, ensuring smooth deployment., • Create and maintain documentation to optimize workflow and improve processes., • Provide training materials to support operational excellence. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Requirements & Skills: • Bachelor's or Master's degree in EE/CE or equivalent experience., • 3+ years of hands-on work experience in controls engineering., • Proficiency in advanced machine control concepts and fundamental mathematical techniques., • Demonstrated expertise in programming Allen-Bradley and/or Siemens PLCs at a "Program Development Level," enabling simple program modifications for a single processor. Capabilities include hardware selection, I/O assignment, and logical control sequence identification in a streamlined and iterative process—all meticulously documented and adhering to the company's programming standards., • Capability to develop and integrate SCADA systems for industrial automation, with a focus on Ignition SCADA platforms., • Ability to evaluate engineering challenges and develop innovative solutions, • Strong communication skills (verbal and written)., • Attention to detail and ability to learn quickly., • Team-oriented mindset with a proactive approach to problem-solving., • Time management excellence to handle multiple tasks efficiently., • Ability and willingness to travel nationally and internationally for project execution, up to 40%. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description In addition to the responsibilities below, the Programmer will be responsible for the overall success of software design, database creation, and the implementation of procedures and standards used in the programming of controls projects. Responsibilities: As key member of the Albireo team, the Programmer will be responsible for developing unit controller programming and designing interface graphics of building automation systems to include, but not limited to: • Review of project specifications, drawings and project specific documents to establish project intent., • Breakdown scope of work into manageable segments and post to Project Manager for scheduling., • Attend or receive meeting minutes from graphics review meetings with customers., • Posting project programming specific “Request for Information” (RFI) documentation to System Engineer, Project Manager and Engineering Manager., • Follow sequence of operations as required by project documents and engineered sequence of operations, utilizing established standards and libraries., • Assist in startup and commissioning of large systems, such as AHUs, chiller plants, or other utilities systems. Includes installation/configuration of workstations, servers, and network., • Work independently or be part of small collaborative teams., • Work with field technicians to troubleshoot and take corrective action to software issues., • Bachelor’s degree in Mechanical Engineering, Electrical Engineering or Computer Science is preferred., • Degree may be offset by 3+ years programming BAS systems., • Experience with Schneider Ecostruxure, Tridium Niagara and/or JCI CCT/Metasys, • Understanding of mechanical HVAC equipment and sequence of operations., • Experience with building automation programming (Function Block, Ladder, or Text-based preferred) or other programming languages (e.g. C, C++, Java, VBA). Tridium system experience, preferred., • Thorough understanding of electrical and network wiring and the programming of BAS components., • Excellent computer skills and strong understanding of MS Office products (Word, Excel); AutoCAD, Visual Basic, Visio., • Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Strong understanding of Modbus and BACnet protocols and integration of these technologies into BAS systems., • Ability to travel to and work on construction sites for commissioning/startup. Salary Range: $80,000-$135,000 USD annually DOE Benefits • Medical Insurance, • Dental Insurance, • Vision Insurance, • Basic Life Insurance, • Voluntary Life Insurance, • Short Term & Long Term Disability, • Paid Vacation, • Paid Sick Time, • Paid Holidays, • 401K with Company match Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionDescription: Setup Configuration Analyst We are looking for a skilled and highly motivated person to join our Setup/Updates team as an entry level Setup Configuration Analyst. The primary responsibility of this role is to remotely perform scheduled setup of hardware and software for customers. As a Setup Configuration Analyst, you will work closely with our implementation/project management team as well as with customers to complete the assigned tasks. The ideal candidate should be detailed orientated, be able to work independently, possess the ability to work effectively with co-workers and customers, and exhibit outstanding customer service skills. RESPONSIBILITIES: - Remotely perform setup of POS system hardware and software components. - Complete assigned tasks accurately and in a timely manner. - Provide status updates of assigned tasks to customer and project manager. - Escalate issues to the technical support team, project manager, development team and department manager as necessary. - Create/update department documentation, provide feedback to department manager. SKILL REQUIREMENTS: - Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience - SQL programming and relational database knowledge - Basic networking and client/server system architecture knowledge - Strong oral and written communication skills - Flexibility to work outside normal hours as needed - Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred - Experience with using retail software or providing technical support in small/medium business applications is a plus Flexible Work Place/Hours Benefits include Medical, 401(K), Vacation/Sick leave, Life Insurance, FSA. Optional Dental and Eye Care Coverage Available Requirements: SKILL REQUIREMENTS: - Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience - SQL programming and relational database knowledge - Basic networking and client/server system architecture knowledge - Strong oral and written communication skills - Flexibility to work outside normal hours as needed - Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred - Experience with using retail software or providing technical support in small/medium business applications is a plus

Job Description POSITION SUMMARY Sunbird (), an established leader in Data Center Infrastructure Management, is looking for a Project Manager to support one of our engineering teams. Our award-winning web-based solutions help our customers understand and manage energy consumption, environmental conditions, and assets in their facilities. Software Project Manager responsibilities include working with Product management team to determine and define project scope and objectives, providing project status updates, and ensuring project stays on schedule and adheres to the deadlines. ESSENTIAL DUTIES AND RESPONSIBILITIES Core responsibilities of the software project manager include but are not limited to: • Work with Product management team to determine and define project scope and objectives., • Act as scrum master for daily standup meetings. Lead other meetings as needed., • Develop and manage a detailed project schedule and work plan., • Ensure project stays on schedule and adheres to the deadlines., • Provide project updates on a consistent basis to various stakeholders about strategy, adjustments, and progress., • Utilize industry best practices, techniques, and standards throughout entire project execution., • Monitor progress and make adjustments as needed., • Measure project performance to identify areas for improvement., • Bachelor's degree in computer science, business, or a related field, • 2-3 years of project management and related experience, • Familiar with Agile software development process and scrum master experience, • Proven ability to solve problems creatively., • Strong familiarity with project management software tools (JIRA), methodologies, and best practices, • Experience seeing projects through the full life cycle., • Excellent analytical skills, • Strong interpersonal skills and extremely resourceful, • Proven ability to complete projects according to outlined scope, budget, and timeline · PMP or CSM certifications · Hands on python programming experience ABOUT SUNBIRD · We are all about delighting our clients and live/breathe the end client/user experience. · We have amazing PTO Policy that allows you to take care of yourself and your family. · We offer medical, dental, vision and life insurance to employees. · We believe in collaboration, teamwork, creativity and taking initiative. Interested? Read on for additional details about this opportunity to join our amazing team! Sunbird is an EEO/AA/ADA/Veterans employer. Powered by JazzHR PhPzptiGBY

Job DescriptionSr. Software System Engineer Role Overview As a Sr. Software System Engineer, you will act as the bridge between data-center domain knowledge, user experience needs, and software architecture. You will research data center technologies, dissect complex concepts, design features, design UI/UX and write high-quality requirements that guide our development team. This role is ideal for someone who enjoys tinkering, reasoning through challenging problems, and understanding how things work end-to-end. Key Responsibilities • Understand deeply how our DCIM software system is architected and how components interact., • Contribute to solution design and feature architecture; identify and document thorough functional and non-functional requirements., • Design new requirements with all existing requirements in mind to avoid conflicts and spot unforeseen issues., • Think critically and logically to solve multidimensional and intricate problems., • Research new technologies, data-center equipment, and protocols to design new features or improve existing capabilities., • Translate complex engineering and data-center concepts into clear, actionable requirements for developers., • Work closely with product, UX/UI, and development teams to ensure features are logical, intuitive, and visually clean., • Create nearly pixel-perfect UI Mockups to ensure clarity, simplicity, and usability., • Understand the SQL database architecture such that proposed database changes maintain simplicity and performance., • Participate in troubleshooting, validating workflows, and improving system logic., • Support quality assurance by validating software behavior matches design intent.Required Skills & Qualifications, • Bachelor’s degree in Electrical Engineering, Computer Engineering, Systems Engineering, or equivalent hands-on experience with data center power systems and software., • Strong understanding of data center infrastructure, including servers, networking, power distribution, PDUs, UPS systems, cooling, racks, and cabling., • Solid knowledge of electricity fundamentals, including three-phase power, power calculations, loads, redundancy concepts, and electrical efficiency., • Demonstrated understanding of how software is built — from technical architecture to APIs, data models, performance, and UI considerations., • Ability to think logically and reason through highly complex, multi-layered problems., • Curiosity-driven mindset: enjoys exploring “how things work” and learning new technologies., • Experience writing detailed, clear, and actionable technical requirements or documentation., • Strong collaboration and communication skills with cross-functional teams., • Eye for clean, intuitive UI/UX, even if not a designer.Preferred Qualifications, • Prior experience with DCIM, BMS, EMS, or related infrastructure software., • Hands-on experience with electrical systems, or data-center operations., • Familiarity with REST APIs, data modeling, and protocols such as SNMP, Redfish, Modbus, MQTT, etc., • Background in feature design, system architecture, technical product management, or solution engineering., • Basic understanding of SQL and can write simple queries, • We are all about delighting our clients and live/breathe the end client/user experience, • We stock the office with soda, snacks, coffee and tea for you to refuel throughout the day, • We have amazing PTO Policy that allows you to take care of yourself and your family, • We offer medical, dental, vision and life insurance to eligible employees, • We believe in collaboration, teamwork, creativity and taking initiativeInterested? Read on for additional details about this opportunity to join our amazing team! Powered by JazzHR HhGIAQRFVv

To thrive in this role, you must have an impeccable safety record, and you must be reliable and show initiative. You show up every day eager to dive in and address issues you see, without being told. You are responsible for keeping the line moving safely and you take a lot of pride in that. \n Here’s what you can expect on a typical day as a Maintenance Electrician on our team at Mauser Packaging Solutions: \n\n • Safety: Safety is our number one priority. You’ll learn our plant safety guidelines and pass all required safety training including lockout/tagout, arc flash, forklift certification, housekeeping, and 5S standards.\n, • Quality: We take pride in our output, and you take pride in ensuring our equipment is running smoothly and safely.\n, • High-Speed, Loud Environment: We manufacture plastic pails through injection and blow molding machining. It’s fast and can be loud. Some areas of the plant get very warm in the summer.\n, • Hard work: Each day you’ll be bending, lifting, stooping, and like to repair equipment. You will replace sensors, contacts, or other defective parts. You’ll work with PLC equipment, multiple small tools, and high-voltage equipment. You are responsible for keeping your equipment in safe, usable condition and your area safe and tidy at all times.\n, • Supportive Team: Everybody plays an integral part in this work-family as we strive to reach all our goals and deliver an excellent product.\n, • High school diploma or equivalent required \n, • Read and understand pneumatic, hydraulic, electric and electronic documentation and drawings and interpret equipment data\n, • Experience and demonstrated knowledge of troubleshooting skills, preferably in PLC motor controls and electrical equipment\n, • Perform PLC programming & diagnostics on various systems and troubleshoot electrical equipment such as relays, contactors, overloads, timers, photodetection & proximity switches or light curtains\n, • Strong understanding of Allen Bradley Control Systems, RS Logic 5000 & Seimens S7 preferred\n, • Experience with Fanuc and Toshiba a plus\n, • Strong problem-solving skills\n, • Computer skills in Microsoft Word, Excel, PowerPoint and Outlook a plus\n, • Good verbal and written communication skills\n, • Good mathematical and organizational skills\n, • Good interpersonal skills\n, • Must be able to work multiple shifts and or overtime\nDo you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us!\n\n \n\n\n Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. \n Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

The specialized training youll receive in this field will pave the way to careers in IT and network support, computer programming, web development and information security.