Computer programming jobs in Rochester, New YorkCreate job alerts

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job Description Job Summary: Conduct Quality Assurance audits and routine checks, tests, gauging and instrument inspections of materials, work in process and finished product. Assure company and product standards are maintained and product integrity is preserved. Consult with Quality Manager to resolve quality, production and efficiency problems. Function as an information source to various company departments when special and critical quality issues occur. Coordinate the flow of jobs through the Inspection Department to insure that we meet the scheduled customer ship date, Essential Duties and Responsibilities: • Determines overall product quality by conducting and evaluating various visual and product tests for obvious defects., • Routinely completes and interprets inspection paperwork and blueprints including GD&T., • Inspects incoming jobs from sub-contractors for quality and product integrity., • Performs in-process, first piece inspection and first article using various measuring equipment., • Notifies Quality Manager when inspection data exceeds acceptable limits or when major incidents of poor quality are detected., • Ensures that all measuring equipment is calibrated within acceptable tolerances and time frame., • May cover for quality assurance personnel., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency., • When requested, may work on special projects and various related assignments., • Performs other related to work duties and assignments as required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Associates degree or equivalent in education and experience., • Minimum two years experience in quality control., • Experience with operating or programming a Sheffield or Zeiss CMM preferred., • Strong attention to detail, • Strong math skills, • Good oral and written communication skills., • Strong organization skills., • Must be familiar with computers and computer software., • Work independently with minimal supervision This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job DescriptionSalary: $100,000-$135,000 The Opportunity: Become a leader in a growing team where your impact will be seen and valued. You will help shape the organization by developing the software engineering team. In this role, you will lead a team of software engineers in the development of embedded systems for military applications while applying industry best practices. You will provide feedback, coaching, and performance assessments to direct reports. You will assign engineers to tasks across multiple projects and guide their execution. Additionally, you will coordinate with project managers to create schedules for software releases and associated documentation. Our Technology: Safran Federal Systems provides Resilient PNT solutions and custom engineering services to U.S. Government agencies, defense organizations, and their contractors. Safran Federal Systems is authorized to work on the full spectrum of U.S. Government classified and unclassified projects, in addition to supporting strategic partnerships for key defense PNT technologies. How I Will Contribute: • Work with other software team members and engineering managers to coordinate the teams activities and resolve engineering and project issues., • Review the output of direct reports, including designs, code, test approaches, test results, and other deliverables, providing guidance and feedback., • Mentor the team to propagate good design principles and development practices., • Investigate new software technologies and tools that may increase the teams performance., • Create and maintain software work instructions, ensuring consistent implementation of best software practices., • Collaborate with groups outside of direct responsibilities, including other engineering groups, Operations, Quality, Sales, etc., for project planning, analysis of product requirements, and outlining proposed solutions., • Set objectives for direct reports, assess performance throughout the year, and provide an annual performance review., • Recruit for open positions on the team and contracts with outside software consultants as needed., • Coach engineers in leading software teams and managing projects., • Assign and manage internal and external resources to support multiple projects. What you Bring to Safran Federal Systems: • Requires 5+ years of related software development experience., • Bachelors degree in computer engineering, Computer Science, or Software Engineering. (A degree in another Engineering discipline or a science field may be acceptable with proven software education and/or training and demonstrated software experience.), • Experience in managing or coaching engineers., • Understanding of Object-Oriented Software concepts., • Advanced degrees are desirable., • Previous experience implementing or operating under CMMI, AS9100, or an equivalent quality process., • Experience working with and programming in the Linux operating system., • Experience designing and developing Object-Oriented Software., • Experience developing and debugging Embedded Software Systems., • Practical experience in C/C++ object-oriented analysis and programming, as well as multi-threaded/multi-tasking programming, is required. Understanding of development for a resource-constrained target environment with specific performance requirements is desired., • Competence in deploying and using software integrated development environments (IDEs) and related tools, including compiling/building, debugging, configuration management (version control), defect management, continuous integration, and code analysis tools., • Proven skills in refining customer and business requirements into software specifications., • U.S. citizenship is required., • The ability and willingness to obtain a security clearance is preferred., • The person in this position needs to have an ability and willingness to travel up to 15% of the time., • Strong communication and problem-solving skills., • The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, etc., • Must be able to remain in a stationary position 50% of the time. About Safran Federal Systems: Safran Federal Systems has been awarded as a Winner of the USA Today and Rochester Metro Area Top Workplaces 2025 Award. In 2022, Safran acquired Orolia, now Safran Trusted 4D, the world leader in Resilient PNT. At the intersection of critical infrastructure and national defense, Safran Trusted 4D solutions govern and protect the integrity of systems that shape the world. In early 2019, Orolia Defense & Security spun off as a separate entity from its parent company Orolia, with the mission of providing resilient Positioning, Navigation and Timing (PNT) solutions and custom engineering services to U.S. Government agencies, U.S. Defense organizations, and their contractors. In August of 2019, Orolia Defense & Security acquired Talen-X, a U.S. company specializing in advanced GNSS (Global Navigation Satellite System) Simulation solutions and Interference, Detection, and Mitigation (IDM) technologies. Talen-X's portfolio was an ideal fit and has helped to enhance Safran FS's overall offerings. The acquisition enabled Talen-X's existing resources, operations, and capabilities to be scaled and accelerated to better support the warfighter. Read the press releasehere. Safran Federal Systems operates as a proxy-regulated company, Free of Foreign Ownership, Control, or Influence (FOCI). As such, Safran FS Defense & Security is approved to work on the full spectrum of U.S. Government classified and unclassified projects and is positioned to support strategic partnerships in the development of key PNT technologies for the defense market. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Please note this description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description OVERVIEW: The New Beginning House Life Skills Specialist will engage and establish mutually respectful, trusting relationships with the youth we serve. Staff will utilize a strength-based, trauma-informed approach to working with youth. The Specialist is responsible for the coordination of life skills programming and education and employment curriculum at the New Beginning House. Staff will conduct on-going assessments of youth's skill level and create individual/group training opportunities. The Specialist will also be responsible for providing direct supervision and support to residents during traditional and non-traditional hours. Monitoring group dynamics and direct crisis intervention and response is expected. This position will also assist the New Beginning Program Manager in creating and implementing a service learning model for the residents in order to build healthy, permanent connections in our community. ESSENTIAL FUNCTIONS AND EXAMPLE OF DUTIES: • Crisis intervention and response;, • Conduct on-going assessments of participants life skills, employment and education needs;, • Implementation of life skills training and employment and education curriculum;, • Incorporating CYS philosophy and effective teaching approaches;, • Is able to manage the environment in order to provide a safe and supportive residential program through mediation, role-modeling and positive interaction with New Beginning residents;, • Transporting program participants, as required and consistent with agency policies;, • Possesses sound problem solving and decision-making skills;, • Maintains clear professional boundaries;, • Is able to work evening hours and weekends;, • Understands and promotes strength-based, trauma informed service delivery (youth leadership, asset development);, • Is knowledgeable on managing group dynamics and can demonstrate various intervention techniques;, • Is familiar with the homeless/runaway youth service system and community resources;, • Maintains accurate and up to date client records EMPLOYMENT GUIDELINES: Candidate must: • Adhere to ethical conduct, • Demonstrate professionalism i.e., timely, dependable, responsible, flexible, • Be non-judgmental and respectful, • Model principles of inclusion and tolerance, • Be youth centered and positive, • Be family friendly, • Establish effective working relationships with supervisor and co-workers, • Develop positive relationships with all key stakeholders, • Have strong literacy skills (i.e., reading, writing, comprehension), • Have excellent communication skills (verbal and written), • Conduct research and apply best-practices and evaluation methods, • Effectively promote knowledge and skill development and positive behaviors, • Provide leadership and/or work independently as requested CULTURAL SENSITIVITY: The Center delivers services to youth and families from many racial, ethnic, cultural, social and life style groups. We value differences in people and strive to understand diverse cultures, ethnic origins, sexual orientations, abilities and beliefs. To this end, all staff are required to attend professional development trainings and to continually enhance their understanding of cultural diversity. Staff are expected to respect and honor cultural and human diversity. The annual Performance Appraisal provides an opportunity for staff to evaluate how they are integrating culturally competent practices into their everyday work. QUALIFICATIONS: A minimum of an Associate's Degree in human services, education or a related field; and (1) one-year experience or an equivalent combination of education, employment and life experience. Bachelor's Degree preferred. In addition to the above, it is mandatory that prior to hire a candidate have or be willing to obtain: • A valid NYS driver's license and a driving record acceptable to agency insurance carrier, • Regular access to a motor vehicle or reliable transportation, • Automobile insurance at the level of $300,000 per accident/$100,000 per person Bodily Injury and $50,000 Property Damage, • Proof of a satisfactory physical exam within the last 12 months including a PPD and annually thereafter., • It is also mandatory that new employees be cleared by the NYS Central Register prior to interaction with clients. COMPUTER SKILLS RECOMMENDED: Microsoft Office - Advanced Rev. 12/2022 The Center for Youth provides equal opportunities for employment.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: • Intermediate level professional, • Two years or more of professional experience in a manufacturing business environment, • Five years or more of manufacturing/sheet metal/welding fabrication knowledge, • CNC machining / programming background is a plus, • A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: • Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage’s, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual job cost vs. quoted job cost, • Drive process improvements to generate cost reduction, • Help write the process sheets (Travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed Measurement Tools: • On time delivery to customers, • Quality performance, • Decrease in job setup time on turret, mills and lathes, • Cost savings for production; including tooling, • Project management and document control organization skills, • Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Job purpose The primary responsibilities are to program, setup and run Haas CNC mill and 5Axis CNC Mori Lathes with live tooling while maintaining production efficiencies and part quality. Duties and responsibilities • Mastercam programming, setup, operate and debug Haas mill, Mori 5 axis lathes or similar machines., • Make machine tool offsets as needed to maintain part quality., • Make minor program changes to NC code as needed., • Identifies signs of tool wear and then makes the appropriate process or tool change(s)., • Reads process sheets and mechanical drawings with the understanding of GD&T., • Works on multiple machines and performs multiple tasks throughout the day., • Uses general measuring instruments such as; indicators, micrometers, calipers, optical comparators, gage blocks, rules, protractor and height gages., • Enters inspection data into a computer software program., • Performs basic machine maintenance such as changing fluids and filters., • Maintains a clean work environment and machine work area., • Follows company written policy and documented procedures., • Check parts on CMM., • Other duties as assigned. Qualifications • High School Diploma or Technical Training Certificate, • Minimum 3-5 years of experience setting up and running CNC Lathes and Mills., • Technical Training College with the focus of study being CNC setups and operation or similar Apprentice training., • Ability to read blue prints and knowledge of GD&T a must., • An understanding of both the Metric and English measuring systems a must., • Ability to use a variety of measuring equipment., • Basic computer knowledge along with Microsoft Office, • Knowledge of cutting tools and exotic materials/high temp. alloys., • Ability to program and edit NC programs with understanding of cutting parameters., • Proficient with computer and Microsoft Office., • Knowledge of Mori Seiki and Mastercam a plus., • Strong communication skills. Working conditions • Generally working in production environment., • Required exposure to industrial oils, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Requirement for some independent actions and/or decisions is expected., • Required daily: periodic lifting of materials and parts weighing up to 70 lbs., • Required intermittent long periods sitting and standing. BENEFITS INCLUDE • Medical, Dental & Vision, • Company Paid Life Insurance, • Short- and Long-Term Disability, • Company Contributions to HSA & HRA, • 401k Company Match 100% up to 4%, • Workplace Wellness Programs, • Paid Time Off (including 14 Company Paid Holidays), • Work hours: Monday through Thursday, 5:30 am - 3:00 pm, Friday, 5:30 am - 9:30 am #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: A CNC Machinist I will operate computer numerical control (CNC) mill and lathe machines to precisely manufacture parts from raw materials like metal or plastic, by interpreting blueprints, setting up the machine, and monitoring the production process to ensure the finished product meets required specifications and quality standards. Key responsibilities include reading technical drawings, selecting appropriate cutting tools, basic programming using CAD/CAM software and performing quality checks on the produced parts. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Review and understand blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and set up requirements., • Align and secure holding fixtures (such as: collets, vices, indicating vices), cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig borers, grinders, and tooling pre-setter., • Understand, calculate and set controls to regulate machining factors, such as speed, feed, coolant flow and enter command to retrieve, input or edit computerized machine control media; observes machine operation to detect malfunctions or out-of–tolerance machining and adjusts machine controls or control media as required., • Verify conformance of finished work piece to specifications, using precision measuring instruments such as micrometers, calipers, comparator, height gauges, and gauge blocks.., • Confer with engineers, production personnel, or technical leads to resolve machining or assembly problems., • Comply with company requirements in completing essential documentation as required., • Train, assist and support new employees in producing quality parts and in completing all process requirements., • Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury., • Maintain a clean work area and assure safe operation of all equipment., • Be available on reasonable notice for unscheduled overtime to meet production schedules., • Perform and document Operator Preventative Maintenance operations as needed., • Fully understand setup and operation of at least two machining field (mills, chucker lathes, swiss lathes, grinders, EDMs, etc) You Have: • High School Diploma/GED or vocational equivalent., • Minimum 3 years’ experience in precision CNC Mill/Lathe machining within a manufacturing environment., • Basic understanding of machine programming capabilities through CAD/CAM software., • Basic understanding of GD&T and corresponding measurement tools relative to a precision machine shop environment (micrometers, verniers, drop gauges, optical comparators, etc.), • Basic Knowledge of G & M codes., • Proficiency in blueprint reading, quality inspection, creating preventive maintenance plans, mechanical troubleshooting, and lean manufacturing principles. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. C Shift: Monday - Friday, 10:00pm - 6:30am Before transitioning to a standard C shift, this role will spend 2 - 4 weeks training on A shift: Monday - Friday 6:00am - 2:30pm

Job Description The Systems Administrator plays a vital role within The Strong’s technology team, leading the administration, support, and optimization of the museum’s core information technology (IT) infrastructure. This hands‑on position configures, maintains, and secures on‑premises and cloud‑based servers, storage, and network systems to ensure high availability, performance, and security for the organization. Operating in a dynamic nonprofit environment, the role blends system administration expertise with proactive infrastructure management. The Systems Administrator oversees daily operations such as backups, patching, virtualization, identity and access, and endpoint management, while also managing firewalls, switches, wireless access, routing, and segmentation. Success requires strong technical leadership, project ownership, and the ability to balance strategic planning with responsive issue resolution. The Systems Administrator is expected to stay current with evolving technologies, work within budget constraints, and bring a solution‑oriented mindset to both immediate tasks and long‑term infrastructure improvements, contributing to a culture of teamwork, service excellence, and integrity consistent with the museum’s mission and values. All museum employees are expected to contribute to a supportive, collaborative, and mission-driven work culture. A consistent standard of professionalism, respect, and enthusiasm is required in interactions with colleagues, guests, and external partners. Provides day‑to‑day support, implementation, and maintenance of the museum’s infrastructure, including virtualization platforms, server operating systems, storage, and enterprise applications. They administer Windows Server environments and core services such as Active Directory, DNS, DHCP, Group Policy, and Microsoft 365, with attention to identity, security, and lifecycle management. They monitor system health and capacity to maintain high availability, perform routine backups and disaster recovery operations, and regularly test restore procedures to verify data integrity. They document configurations, changes, licensing, and asset life cycles, adhere to change control practices, and ensure that operating systems and enterprise applications are patched and updated in a timely manner. The role contributes to the support of point‑of‑sale and other business‑critical systems and provides technical guidance for building technologies, such as HVAC, security, and camera systems, in coordination with museum teams and external vendors. Deploys, monitors, and manages the local and wide‑area network, including switches, wireless access points, and firewalls. They maintain firewall rules, VLANs, routing, and quality‑of‑service configurations that support performance, reliability, and security. They diagnose and resolve network connectivity issues and serve as an escalation point for the Help Desk and technology team. They perform switch programming and structured cabling tasks as needed, maintain accurate network documentation such as topology diagrams and configuration change history, and use monitoring tools to identify and remediate potential bottlenecks, vulnerabilities, and service‑impacting events. They coordinate network requirements that support exhibits, AV systems, public‑facing technologies, and special events. Working closely with the Director of Technology, the Systems Administrator scopes, plans, and executes infrastructure projects aligned with museum goals, budget, and risk tolerance. They evaluate new and emerging technologies and make recommendations that improve scalability, resilience, performance, and operational efficiency. They lead or participate in cross‑functional initiatives, coordinate with vendors and service providers for implementation and troubleshooting and contribute to contract and licensing reviews to ensure value, compliance, and sustainability. Provides Tier 2/3 support for escalated issues and mentors junior team members in troubleshooting methodology, tooling, and best practices. They maintain detailed operational logs, incident records, and performance reports, and they author and maintain internal documentation including procedures, standards, runbooks, and user guides. They implement and enforce security policies and controls—such as least‑privilege access, multi‑factor authentication, secure configuration baselines, and audit logging—and participate in the team’s on‑call rotation, responding to after‑hours emergencies when required. Remains current with industry trends, security advisories, and best practices in systems and network administration. They actively participate in staff meetings and IT planning sessions, contribute to process improvement initiatives, and provide a high level of customer service while engaging collaboratively with departments across the museum. Participates in the technology team’s after-hours on-call rotation and contributes to organizational planning as needed. Required Qualifications: • High school diploma or equivalent, plus 3–5 years of experience in system administration within a business or institutional environment., • Hands-on experience with Microsoft Active Directory, Microsoft 365 Cloud, and Windows Server environments (3–5 years)., • Experience with Linux administration (Debian and Red Hat–based systems, 1–3 years)., • Proficiency managing virtualized infrastructure (VMware, Hyper-V, or similar)., • Strong networking background, including TCP/IP, VLANs, DNS, DHCP, fiber optics, and high-speed network infrastructure., • 3–5 years of experience with managed switches and firewalls, including programming and maintenance., • Proficiency with PowerShell and other scripting tools for automation and system management., • Familiarity with backup and disaster recovery technologies and best practices., • Demonstrated organization, time management, and ability to manage competing priorities in deadline-driven environments., • Strong oral and written communication skills and the ability to work effectively in a team environment., • Associate or bachelor’s degree in computer science, information systems, or related field., • Project leadership or management experience., • 3–5 years of experience with Next-Generation Firewalls, including policy and UTM configuration (Fortinet products preferred)., • Experience with Cisco switching appliances (Catalyst and Nexus product lines)., • 3–5 years of experience managing backup infrastructure with knowledge of 3-2-1 principles., • 3–5 years of experience with Entra ID, Intune device management, and other Microsoft cloud identity/device management products., • Industry certifications such as Microsoft Certified: Azure Administrator Associate, VMware VCP, Fortinet NSE, CompTIA Network+/Security+, or CCNA.

Job Description PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Machine Programmer Your Role: The Machine Programmer develops, modifies, and evaluates computer programs for a variety of equipment. In this role, you will fully utilize the machine’s capabilities to maximize material utilization and productivity, as well as ensure computer programs produce parts that meet quality and cost expectations. Additionally, you will be responsible for creating programs to manufacture parts based on engineering blueprints. Reports To: Machining Supervisor What We’re Looking For: • 1-3 years programming experience with Gibbs Cam., • Ability to read and understand blueprints and engineering specifications., • Capable of using measuring devices for equipment set-up and product inspection., • High school diploma or GED equivalent required. Work Authorization: US Persons PEKO Perks: • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. A reasonable estimate of the compensation range for this position is $28.00-$35.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. Powered by JazzHR 2aaRj0g2LE

Job DescriptionSt. John’s is leading and inspiring a shift in society’s views of elderhood. Join our family of dedicated, talented employees who are at the forefront of innovative senior services delivery in this community. St. John’s embraces living every day by fostering a culture that is friendly, respectful, responsive, compassionate, innovative, and fun for both employees and the elders and residents that call St. John’s home. If this description speaks to you, continue reading about the opportunity of Community Life Specialist. This is a part time temporary position, requiring 10-12 hours a week, located at St. John’s Meadows. Position Summary: The Community Life Specialist is responsible for preparing the monthly calendar of events and facilitating programming to include a variety of programs and outings and 7 Dimensions of Wellness. Develop relationships with residents, families & staff, book entertainment and speakers, follow budget guidelines, and work collaboratively with social recreation team, other departments and community affiliates. The hours are Monday -Thursday 10:30 am 7:00 pm & Friday 8:30- 5pm with flexibility. Responsibilities include: • Work with the Social Recreation Manager to develop and facilitate meaningful, innovative and creative programs for residents., • Work collaboratively with other departments for interdepartmental programs and outings., • Ability to assess residents' needs and interests to develop and implement engaging programing., • Ability to organize direct volunteers and facilitate programs and outings., • Build and develop meaningful relationships with all residents of St. John’s., • Works with the Social Recreation Manager to follow and maintain budgetary guidelines., • Works with the Social Recreation Manager to schedule outside entertainment and contracted services., • Works collaboratively with the Social Recreation Manager and Community Life Specialists in creating combined monthly publication for all neighborhoods, printing and distributing to all residents as appropriate., • Work collaboratively with outside vendors and community recourses that will come to Meadows/Brickstone for programming., • Works with the Social Recreation Manager for creation and implantation of all data entry of recreational programming on all St. John’s communication tools., • Perform all other tasks as required by management., • High School graduate or equivalent is required., • Associates Degree in Human Services and or Therapeutic Recreation preferred but not required or at least two years of experience preferred and one year required working within a senior living related field., • Fluent in the English Language., • Reliable transportation., • Ability to flex schedule occasionally as needed., • Sitting, standing, squatting, stooping and bending., • Health, dental, vision insurance (30 hours+), • Employer sponsored life insurance & telemedicine (30 hours+), • Weekly paychecks, • Competitive pay, • Free parking, • 24/7 fitness center, • Generous paid time off and holidays, • On-site child care, • Employee Assistance Plan, • Cell phone discounts

Job Description Insero Talent Solutions is recruiting a Software Engineering Manager for an electrical manufacturing company in Rochester, NY. GENERAL RESPONSIBILITIES: Manage and contribute to software development projects for a small team of engineers. RESPONSIBILITIES: Collaboration: Work with management, marketing, business line managers, electrical engineers, and the production department on product definition, requirements, development, and support. Serve as the interface between software and hardware engineers. Report on product status and project activities to management. Project Planning: Define project scope and direct the software and firmware projects for embedded, desktop and server-based applications. Determine strategies for bringing projects to completion on schedule. Design test methods. Team Leadership: Provide support to the development team as well as constructive feedback and positive motivation. Review the expectations for team members and provide guidance, mentoring, and technical leadership. Resource Management: Oversee the allocation of team resources and prioritize tasks. Risk Management: Identify potential risks, develop contingency plans, and manage changes in project scope or direction. Organization: Ensure team members are following best practices for source control, issue tracking, documentation, and testing. Oversee the use of version control and issue-reporting tools. Software Creation: Support projects as an individual contributor by developing and testing code and creating supporting documentation. User Support: Ensure that developed software meets performance specifications and requirements. Resolve any user issues. QUALIFICATIONS: • Bachelor's Degree in Computer Engineering, Computer Science, or a related technical field., • At least five (5) years programming experience with C/C++ and C# at an individual contributor level., • At least three (3) years of experience in software project management., • General knowledge of commonly used hardware technologies such as USB, Ethernet, I2C, and Serial Ports., • Experience with creating software for direct real-time control of electronic hardware via direct digital control signals of integrated circuits., • Experience in developing embedded code with multi-threading, inter-process communications, and interrupt handlers., • Experience with Microsoft Azure DevOps., • Experience with Windows and Linux application development.

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: A CNC Machinist I will operate computer numerical control (CNC) mill and lathe machines to precisely manufacture parts from raw materials like metal or plastic, by interpreting blueprints, setting up the machine, and monitoring the production process to ensure the finished product meets required specifications and quality standards. Key responsibilities include reading technical drawings, selecting appropriate cutting tools, basic programming using CAD/CAM software and performing quality checks on the produced parts. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Review and understand blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and set up requirements., • Align and secure holding fixtures (such as: collets, vices, indicating vices), cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig borers, grinders, and tooling pre-setter., • Understand, calculate and set controls to regulate machining factors, such as speed, feed, coolant flow and enter command to retrieve, input or edit computerized machine control media; observes machine operation to detect malfunctions or out-of–tolerance machining and adjusts machine controls or control media as required., • Verify conformance of finished work piece to specifications, using precision measuring instruments such as micrometers, calipers, comparator, height gauges, and gauge blocks.., • Confer with engineers, production personnel, or technical leads to resolve machining or assembly problems., • Comply with company requirements in completing essential documentation as required., • Train, assist and support new employees in producing quality parts and in completing all process requirements., • Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury., • Maintain a clean work area and assure safe operation of all equipment., • Be available on reasonable notice for unscheduled overtime to meet production schedules., • Perform and document Operator Preventative Maintenance operations as needed., • Fully understand setup and operation of at least two machining field (mills, chucker lathes, swiss lathes, grinders, EDMs, etc) You Have: • High School Diploma/GED or vocational equivalent., • Minimum 3 years’ experience in precision CNC Mill/Lathe machining within a manufacturing environment., • Basic understanding of machine programming capabilities through CAD/CAM software., • Basic understanding of GD&T and corresponding measurement tools relative to a precision machine shop environment (micrometers, verniers, drop gauges, optical comparators, etc.), • Basic Knowledge of G & M codes., • Proficiency in blueprint reading, quality inspection, creating preventive maintenance plans, mechanical troubleshooting, and lean manufacturing principles. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift: Monday - Friday, 2:00pm - 10:30pm Before transitioning to a standard B shift, this role will spend 2 - 4 weeks training on A shift: Monday - Friday 6:00am - 2:30pm

Job Description Company: Bausch + Lomb Experienced Electro-Mechanical Talent Wanted – September 11th Hiring Event in Rochester, NY! Are you a skilled maintenance technician professional ready for an opportunity with a leading global eye health company? Join us for our Hiring Event on Thursday, September 11th, from 12 PM – 6 PM at the DoubleTree by Hilton in Henrietta, NY! Our team of Electro-Mechanical Technicians is growing, and we have openings available for people who have performed equipment repairs for at least 2 years. * Electro-Mechanical Technicians – 2+ years of experience in equipment repair and preventative maintenance. This position is made for you if you love solving problems, troubleshoot, repair, and maintain high-speed manufacturing equipment, work alongside engineers and operations techs, and play a key role in minimizing downtime. * Work Schedule: We offer two options — both 12-hour shifts with built-in overtime and days off: * Rotating Day/Night Shift: Week 1: Mon/Tues (6 AM–6 PM), Fri/Sat/Sun (6 PM–6 AM) - Week 2: Wed/Thurs (6 AM–6 PM) * Straight Night Shift: 6 PM–6 AM, following a 2-2-3 schedule If the night shift fits your lifestyle and being a part of a global vision care company interests you, we want to meet you! Preferred Experience: ✔Experience in medical device or other regulated industries ✔Computer skills ✔A commitment to quality and precision What to Expect: ✅On-the-spot interviews ✅Competitive compensation & benefits ✅A chance to join a growing company setting the standard in eye health worldwide Ready to take the next step? Apply now at: Responsibilities: • Work on a maintenance team alongside Operations technicians and Engineers in a cross-functional team setting to minimize machine downtime and improve line output., • Troubleshoot, repair, and properly document machine issues., • Troubleshoot / diagnose PLC (Programmable Logic Controllers)/HMI (Human Machine Interface) control systems software when possible., • Perform and document preventative maintenance as required., • Communicate machine issues/downtime to other shifts as well as supervisor/management., • Assist with any offline machine rebuilds or prep-work., • Ability to work Bausch + Lomb twelve hour rotational shift schedule is required., • Minimal travel to support equipment build/integration and/or training may be required. HS diploma or equivalent required. * Technical apprenticeship or Associates degree in related electrical or mechanical field preferred, but job experience may be substituted for degree requirement. Specialized Skills: Minimum 2 years in technician role performing equipment repairs and preventative maintenance. * Medical device or other regulated industry documentation experience beneficial. * Attention to detail, excellent communication skills and ability to work in a team environment are essential. Special Skills: • Understanding cGMP and experience in clean room environment preferred., • Ability to read and understand mechanical drawings and electrical prints required., • Demonstrated problem solving and strong troubleshooting skills., • PLC troubleshooting skills desirable., • Programming/troubleshooting robots (SCARA, FANUC, Staubli, IAI) and servo motors desirable. Apply now to connect with a recruiter, or apply at: You should be proficient in: • Equipment Troubleshooting, • Electrical Schematics, • Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Pneumatics Experience, • Motor Replacement/Repair/Maintenance, • Hydraulics Experience, • Electrical / Electronic Systems, • High School / GED, • Excellent Communication Skills, • Shop Math Skills, • Basic Computer Skills

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications, • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to Machine Vision demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Title CNC Operator 1 - C Shift Department Diamond Turning Reports to Diamond Turning Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: A Diamond Turning Operator, level I is a highly skilled machinist/toolmaker that creates optical surfaces in a variety of materials using high precision machining centers. You will: • Operate and setup diamond turning/grinding machining centers., • Understand CNC programming and have the ability to create and/or modify CNC programs., • Operate and understand Optical test equipment such as interferometers and surface profilometers., • Operate tradition inspection equipment such as toolmaker’s microscope, micrometers, height gages, and vernier calipers., • Ability to read and understand both optical and traditional blue prints., • Possess computer skills. You have: • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Ability to apply basic mathematical concepts., • High School Diploma or equivalent., • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles.May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. RPO offers a competitive work life balance with the opportunity to grow within a unique industry and along with a collaborative, motivated team to drive key programs. C shift hours: 10pm-6:30pm Training takes place Monday-Friday 6am-2:30pm

Job Description The Louis S. Wolk Jewish Community Center of Greater Rochester is located alongside the Erie Canal in Brighton and is a 200,000 square foot facility that houses our state-of-the-art fitness, wellness and recreation programming, an aquatics center, a Professional Theatre, Children’s Center and our camping programs We pride ourselves on providing our members with quality educational, cultural arts and social programming, and we are an inclusive community center that welcomes people of all faiths, backgrounds, and ages. We are looking for a Full-Time/ Part Time Housekeeper to join our team who is responsible for ensuring the facility is clean and sanitized for all our members, guests and staff. Schedule Monday - Friday • Day shift: 6:30 AM - 3:00 PM, • Night shift: 5:30 PM - 2:00 AM To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable an individual with disabilities to perform the essential job functions. • Clean locker rooms, shower stalls, washrooms on a daily basis., • Sweep, vacuum, mop, scrub, wax and polish floors using industrial vacuum cleaners and scrubbing and buffing machines., • Operate various mechanized cleaning equipment, such as vacuums, polishers, and buffers., • Wash windows on a regular schedule., • Completely strip and recoat all floor areas when necessary and as scheduled., • Use ladders, dusts and wash walls, cleans shower areas, bathrooms, sink areas, common areas, office, and all areas of classrooms, cleans ceiling fans and vents, dust all areas, furniture, light fixtures, windowsills., • Move furniture and equipment to clean areas. May remove stains from such surfaces as rugs, walls and floors using chemicals and cleaning solutions., • Empty trash containers daily and responsible for disposal of trash., • Must handle various cleaning solvents, chemicals, etc., • Plan work schedule for major tasks., • May sweep walks and remove snow or perform other incidental seasonal tasks., • Report any needed repairs immediately to supervisor., • Communicate effectively with staff and members of the Facility., • May perform other duties as requested by management. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to: • Extensive work while standing, extensive walking, reaching with hands and arms, grasping and twisting, climbing and balance, • Frequent stooping, kneeling, crouching or crawling, • Bending and moving continually during working hours, • Lift and/or move up to 50 pounds, • Lift and/or move over 50 pounds with assistance The work environment characteristics described here are representative of those an employee encounters while performing the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. • Moving mechanical parts, extreme heat, extreme cold, • Risk of electrical shock, fumes, cleaning chemicals, outside weather conditions., • While performing the duties of this job the employee is regularly exposed to inclement weather conditions, i.e., shovel snow; salt; wash window, pick up trash, empty garbage., • Health, Dental and Vision, • Retirement Plan, Life and Disability Insurance, • Employee Assistance Program, • Free membership to our Fitness and Aquatics Center

Job Description Job Description Title Maintenance Mechanic Technician - B Shift Department Facilities Reports to Director of Facilities SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: Maintenance Mechanic Technician is responsible for mechanical and electrical maintenance and repair of all plant production and support equipment. Responsible for finding replacement parts or a means of repairing damaged parts. You will: • Troubleshoot and repair mechanical and electrical problems that occur on production and facility equipment, • Work with others as well as independently, • Read blueprints and set up procedures, • Operate several electrical test devices including digital multi-meters, amp meters, oscilloscope, etc., • Machine Programming, • Troubleshooting relay logic, control system devices, analog input/output devices, and similar equipment, • Perform calibration of precision devices related to measurement of process variables. (i.e. temperature, pressure, flow, etc..)., • Perform preventative maintenance on equipment including inspection, lubrication, and evaluation, • Maintain, troubleshoot and repair hydraulic, mechanical, pneumatic, and vacuum systems., • Must be able to read, understand, and create electrical and mechanical blueprints, assembly drawings, equipment manuals, control schematics, ladder logic and other technical manuals, • Must have a complete understanding of analog and digital control signals and power distribution systems – including but not limited to 0-10VDC, 4-20MA, 24 VDC, 120VAC control circuits, and 480VAC motor circuits, • Experience in programming and troubleshooting HMI and PLC controlled systems, • Process control experience, • Knowledge and understanding of Lock Out/Tag Out procedures, • Ability to work with 3 phase 240/480 and single phase 220/110 voltage systems, • Knowledge and understanding of induction heating equipment, • Ability to repair and maintain equipment with or without documentation, • Ability to document your own work and be able to generate repair manuals and preventative maintenance procedures for equipment, • Be able to respond immediately to equipment related problems and maintain, troubleshoot, and repair equipment to ensure minimal down time., • Maintains an organized, clean, safe work area., • Able to work independently in performing various equipment maintenance tasks. Abilities Required: • Experience in programing and troubleshooting HMI, • Process Control Experience., • Knowledge and understanding of lockout/Tag out procedures, • Good manual dexterity, • Proficient math skills, • Good communication skills, • Proficient blueprint/schematic reading, • Analytical troubleshooting, • Effective problem solving, • Computer skills, • Decision making, • Apprentice program or equivalent experience, • Leadership skills, • Good time management skills, • 20/20 vision or corrected vision, • Electrical background, • Soldering, • Responding to alarm troubles / call ins after hours You have: • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Ability to apply basic mathematical concepts., • AAS in Electrical/Mechanical Technology, • Apprenticeship Program, • AAS Degree with (5) years minimum experience preferred, but not required You are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift Schedule: Monday - Friday 2pm - 10:30pm. New Hires may be required to train on a Day shift schedule for 2-4 weeks.

OUR MISSION BRICK is on a mission to support families from pre-cradle-to-career through holistic support, excellent schools, and clear pathways to college and career. By creating a comprehensive network of services, we are righting the wrongs of racial and economic inequality and paving the way for families to forge futures abundant with opportunity, wellness, and joy OUR VISION BRICK envisions a world of racial and economic justice, where every child and family has the support they need to learn, achieve, and work towards a fulfilling life of personal and collective prosperity. To learn more about BRICK, please visit ___ BRICK currently has schools in three regions: Newark, New Jersey, Rochster, New York and Buffalo, New York. As a full K-12 continuum, we start our college-focused academic programming in kindergarten and yield better results for Newark students for generations to come. We are more than a school; we are a full ecosystem of supports from cradle to career. We provide our families with free wraparound services like prenatal care, career services, and housing support. Our high school alumni receive up to six years of post-graduate assistance. Overview Role: BRICK is seeking a visionary Principal-in-Residence (PIR) to immerse themselves in our holistic model, receive mentorship from seasoned educational leaders, and cultivate the skills required to inspire students, staff, and community alike. Demonstrated excellence in the residency can lead to appointment as the Founding Principal of BRICK Rochester Academy Charter School. Essential Functions Responsibilities include, but are not limited to: · Partnering with the Director of Operations to ensure the school achieves all of its academic, cultural and operational goals · Creating and maintaining a positive school culture for students and staff that aligns to the BRICK core values · Partnering with the BRICK Education Network to implement its academic, cultural, and college & success models, including the shared network curriculum, emphasis on culturally relevant instruction, and commitment to restorative practices · Leading professional development sessions using the highest leverage adult learning practices · Managing the school’s instructional leadership team as well as a cohort of teachers. · Developing deep mastery of the subjects and grade levels that the Principal will lead and coach · Training teachers on how to effectively internalize lessons, how to adjust those lessons to meet the needs of their students, and to plan strategic interventions to maximize student mastery and growth. · Training teachers on how to administer network assessments, how to analyze the results of those assessments, and to build action plans to maximize student mastery and growth. · Providing high-quality instructional coaching by observing classrooms, identifying key levers to help teachers improve, and then providing the support necessary to improve each teacher’s practice, including the use of real-time coaching. · Internalizing the BRICK School Leadership Guidebook to understand the network’s approach to the Principalship · Serve as the “face” of the school leading communication with and engagement of families and being the face of the school · Collaborating with the BRICK Superintendent to produce foundational documents that will guide your work throughout the year, such as an Academic priority plan, a monthly map, a meeting matrix and progress monitoring tools to share progress towards Academic goals and priorities. Qualifications: · Ability to demonstrate a leadership presence and to invest others in the mission and vision of BRICK · A commitment to servant leadership and the belief that a Principal’s success is directly connected to the success of their students and staff. · Strong organizational skills, including the ability to manage multiple projects simultaneously and to effectively lead teams to complete complex projects over time. · Strong interpersonal and communication skills and the ability to work effectively with a diverse group of people · Ability to take initiative to create new systems where necessary and to work independently · A commitment to doing whatever it takes to ensure the success of their founding school. · Proficiency in working with computers, commonly used software (like Google Documents and Google Sheets) · Experience supporting students and families in Newark or another similar location · Experience leading or supporting charter school operations is preferred · Willingness to travel to attend professional development sessions or to participate in other learning experiences with BRICK Education Network staff · Bachelor’s Degree required; Master’s Degree required · At least five (5) years of teaching experience. · A past history of achieving high academic results with students. · Ability to physically perform the duties and to work in the environmental conditions required such as maneuvering in classrooms and office space-reaching file cabinets, filing, faxing, scanning, coping, typing, mailing, and making phone calls · Must be able to sit for up to two (2) hours looking at a computer monitor, using a keyboard and mouse and typing · An unwavering commitment to the academic success and personal development of our students. · Current authorization to work in the United States – A candidate must have such authorization by his or her first day of employment. · This role will require occasional out-of-state travel for the cohort residency program, as well as visiting other high-performing schools and networks. Salary, Goals and Employment Period · Salary Range: Competitive compensation package, Based upon previous experience · Employment Period: Twelve Months · Fringe Benefits: Health, Dental, Vision, 401 K BRICK is an equal opportunity employer and does not discriminate on the basis of race, color, gender, religion, age, sexual orientation, national or ethnic origin, disability, marital status, veteran status, or any other occupationally irrelevant criteria. BRICK promotes affirmative action for minorities, women, disabled persons, and veterans.

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: • Competitive Starting Pay, • Paid Training, • Global Advancement Opportunities, • Company Vehicle (as applicable), • Referral Bonuses, • Comprehensive Benefits, • Medical/Dental/Vision insurance, • Health Savings Account (HAS), • Life Insurance, • 401(k) savings plan with company match, • Short-Term and Long-Term Disability, • Employee Assistance Program, • Wellness Program, • And More! What you will do Under direct supervision, completes assigned programming, commissioning, basic troubleshooting, and preventive maintenance of fire / security systems per contract obligations. How you will do it Assists experienced personnel with solutions to systems problems, either troubleshooting the system or advising others on how to resolve problems. Requires understanding of core and third-party fire / security products, software and systems / electrical technology. Assists in performing required commissioning documentation. Provide accurate information for as-builts documentation. Adheres to safety standards and local and national codes, with a high degree of regard to employee and subcontractor safety. Maintains appropriate local and National Fire / Security Industry Certifications. Communicates with customer upon arrival and before leaving the work site. Continuous proactive customer interactions including an in-depth understanding of customer(s) needs wants and systems currently in place. Assists in monitoring project execution per plan. Reports problems or changes to supervisor or management. Completes paperwork and on-site documentation as required. Performs self-study (reading, research, and practice) to obtain technical proficiency on required products and application. Performs other duties as assigned What we look for Required: * High school diploma plus 2+ years of experience in installing fire or security systems is required. Electronics certification from accredited technical school / military electronics training desired. * Demonstrated effective interpersonal skills to represent the company to customers and other outside contacts. * Basic computer skills required. * Attention to detail. * Able to explain technical information to non-technical people * Valid Driver’s License with a clean driving record. Preferred: * NICET Level I Certification * Prior experience withing the Fire/ Security industry with basic knowledge and understanding of Fire/ Security systems, database structure, network configuration and analysis. HIRING HOURLY RANGE: $28-$35 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at

PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Machine Programmer Your Role: The Machine Programmer develops, modifies, and evaluates computer programs for a variety of equipment. In this role, you will fully utilize the machine's capabilities to maximize material utilization and productivity, as well as ensure computer programs produce parts that meet quality and cost expectations. Additionally, you will be responsible for creating programs to manufacture parts based on engineering blueprints. Reports To: Machining Supervisor What We're Looking For: \n • 1-3 years programming experience with Gibbs Cam.\n, • Ability to read and understand blueprints and engineering specifications.\n, • Capable of using measuring devices for equipment set-up and product inspection. \n, • High school diploma or GED equivalent required. \nWork Authorization: US Persons PEKO Perks:\n • Competitive Total Rewards \n, • Tuition Reimbursement (IRS Allowable pre-tax Max)\n, • 401K, Medical, Dental, Vision \n, • Flexible Spending & Health Savings Accounts\n, • Life, Short and Long-Term Disability \n, • We care about our talented and loyal PEKO family.\n, • We are committed to providing a safe, clean, and positive workplace.\n, • We believe in transparency, honesty, and respect for all stakeholders.\n, • We are dedicated to maintaining an agile and financially prudent organization.\n, • We foster the belief that PEKO people are resilient problem-solvers impacting the future.\n, • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. \n, • For more available opportunities at PEKO, please visit our website:\n Jobs & Career Opportunities | Rochester NY | PEKO Precision Products PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. A reasonable estimate of the compensation range for this position is $28.00-$35.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements.

GENERAL SUMMARY Develop CNC part programs, including tooling lists and machine setup instructions. Determines proper tooling, work holding device, and process sequence to achieve specified results and correct part geometries. PRINCIPLE DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS) \n • Create CNC part programs and master programs for family of parts utilizing computer assisted languages.\n, • Select tooling package for part programs to achieve a more cost-effective method of manufacturing parts.\n, • Maintains integrity of CNC program database.\n, • Assist in setup and first part run to ensure the part is machined to specifications.\n, • Confer with tool design & manufacturing engineering on cutting tools, fixtures, manufacturing process and machining times for process masters and routings\n\n EDUCATION AND EXPERIENCE \n • Minimum two years of experience in a manufacturing environment as a CNC Programmer\n, • FeatureCam experience a major plus\n, • Mazatrol programming knowledge is a plus\n, • Inventor experience a plus\n, • Heavy Industry Experience a plus\n, • Experienced in machining castings, steel stainless steel, super alloys and most other material types\n, • Previous experience with milling, turning, horizontal and live tool lathes\n, • Excellent Team Player\n, • Must have attention to detail and strong organizational skills\n\n PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. While performing the duties of this job, the employee is regularly required to sit and use hands, fingers, handle or feel, talk, see and hear. The employee is occasionally required to stand, walk, and reach with hands and arms. The employee must occasionally lift and/or move occasionally lift office products and supplies, up to 25 pounds. Use of the appropriate PPE is required. WORKING CONDITIONS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job operates in a manufacturing professional office environment. The employee can be exposed to fumes or airborne particles, moving mechanical parts, vibration and loud noise level while on the production floor. The noise level in the office work environment is usually moderate. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Anticipated salary range for this position: $43,700/yr. to $80,780/yr. The anticipated salary range is what we believe to be the likely base salary range for this position at the time of posting. Actual salary for this position will depend on relevant qualifications, skills, and experience. SPX FLOW VALUES SPX Flow employees are expected to behave in accordance with our company values as outlined below. QUALITY Quality encompasses all aspects of SPX's business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process and the quality system. All employees have an obligation to identify and record any such nonconformity, and through designed channels, initiate and recommend solutions.

Job purpose The primary responsibilities are to program, setup and run Haas CNC mill and 5Axis CNC Mori Lathes with live tooling while maintaining production efficiencies and part quality. Duties and responsibilities \n • Mastercam programming, setup, operate and debug Haas mill, Mori 5 axis lathes or similar machines. \n, • Make machine tool offsets as needed to maintain part quality.\n, • Make minor program changes to NC code as needed.\n, • Identifies signs of tool wear and then makes the appropriate process or tool change(s). \n, • Reads process sheets and mechanical drawings with the understanding of GD&T.\n, • Works on multiple machines and performs multiple tasks throughout the day.\n, • Uses general measuring instruments such as; indicators, micrometers, calipers, optical comparators, gage blocks, rules, protractor and height gages.\n, • Enters inspection data into a computer software program.\n, • Performs basic machine maintenance such as changing fluids and filters.\n, • Maintains a clean work environment and machine work area.\n, • Follows company written policy and documented procedures. \n, • Check parts on CMM. \n, • Other duties as assigned.\n\n Qualifications \n • High School Diploma or Technical Training Certificate\n, • Minimum 3-5 years of experience setting up and running CNC Lathes and Mills.\n, • Technical Training College with the focus of study being CNC setups and operation or similar Apprentice training.\n, • Ability to read blue prints and knowledge of GD&T a must.\n, • An understanding of both the Metric and English measuring systems a must.\n, • Ability to use a variety of measuring equipment.\n, • Basic computer knowledge along with Microsoft Office\n, • Knowledge of cutting tools and exotic materials/high temp. alloys.\n, • Ability to program and edit NC programs with understanding of cutting parameters.\n, • Proficient with computer and Microsoft Office.\n, • Knowledge of Mori Seiki and Mastercam a plus.\n, • Strong communication skills.\n\n Working conditions \n • Generally working in production environment.\n, • Required exposure to industrial oils, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used.\n, • Requirement for some independent actions and/or decisions is expected.\n, • Required daily: periodic lifting of materials and parts weighing up to 70 lbs.\n, • Required intermittent long periods sitting and standing.\n\n BENEFITS INCLUDE \n • Medical, Dental & Vision\n, • Company Paid Life Insurance\n, • Short- and Long-Term Disability\n, • Company Contributions to HSA & HRA\n, • 401k Company Match 100% up to 4%\n, • Workplace Wellness Programs\n, • Paid Time Off (including 14 Company Paid Holidays)\n, • Work hours: Monday through Thursday, 5:30 am - 3:00 pm, Friday, 5:30 am - 9:30 am\n\n #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® Technology Services is looking to hire a Physical Security Specialist. The Specialist is responsible for the software-specific support of our installation team to include the integration and interface of multiple disparate software applications into fully functioning solutions. This position will be responsible for all levels of system head-end commissioning, upgrades, and advanced diagnostics to achieve the defined functionality of system operation. Pay: $70,000 - $95,000 per year RESPONSIBILITIES: • Capable of advanced integration between disparate electronic security systems, • LAN & Network configurations experience include wireless communications system, • Perform system diagnostic, programming, troubleshooting, configuration scripting and service analysis duties to ensure a fully functioning system, • Work with Project Managers, End Users and Technician team to provide assistance in regards to the software systems, • Troubleshoot project issues and engage appropriate resources as needed, • Escalate significant issues to the management team as needed, • Work with the Project Management team to coordinate project and work schedules to ensure project efficiencies, • High School Diploma or equivalent experience, • In-depth knowledge of industry-leading security system and equipment providers, • Advanced working knowledge of Windows-based platforms, including desktop and server versions, as well as VB scripting., • Ability to read and understand advanced technical information and documentation, • Proficient with MS Office Suite (Excel, Outlook, PowerPoint, Project, SharePoint and Word), • Associates or Bachelor's degree in computer science or related field, • Two (2) plus years in a technical support software or relatable field, • Certification with major enterprise-level security/access control systems, • Certifications in the following Software platforms are preferred, • Symmetry Access Control, FLIR, Axis, Milestone, Agent VI, Commend, and Guardian Shooter Detection, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1419413

Job Description *We are looking for a student available to participate in a two-block co-op program from January 2026 to August 2026. **Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor (now or in the future) or take over sponsorship of an employment Visa at this time. Founded in 1994 and celebrating 30 years in business, Mindex is a software development company with a rich history of demonstrated software and product development success. We specialize in agile software development, cloud professional services, and creating our innovative products. We are proud to be recognized as the #1 Software Developer in the 2023 RBJ's Book of Lists and ranked 27th in Rochester Chamber’s Top 100 Companies. Additionally, we have maintained our certification as a Great Place to Work for consecutive years in a row. Our list of satisfied clients and #ROCstar employees are both rapidly growing— Are you next to join our team? Mindex’s Software Development division is the go-to software developer for enterprise organizations looking to engage teams of skilled technical resources to help them plan, navigate, and execute through the full software development lifecycle. As a member of our agile delivery team, you will perform, analyze, design, program, test, and implement new and existing software applications, features, and functionality under business requirements in a Java environment. The primary focus is on building and testing database-backed web services in a Java/Oracle environment. This role is comfortable working in several programming languages and several test automation frameworks, enjoys solving problems, is accountable for their work output, and works well within team environments. Essential Functions • Develops tasks to accurately break down the work required., • Creates or updates enterprise software in alignment with agile user stories and associated acceptance criteria., • Creates/modifies/executes tests including, but not limited to, unit tests, integration tests, test automation scripts, manual system, and regression test scripts., • Communicates the status of deliverables to scrum team members., • Understands the basics of debugging and the tools used for it., • Ability to gain understanding with help from more senior engineers., • Aware of overall service architecture. Designs basic functions with an awareness of overall service architecture, avoiding duplication across codebases and interface-breaking changes., • Understand the importance of security., • Assists in maintaining existing documentation and effectively documents own work., • At least Three years of education and/or prior Co-op experience, • Familiarity with Java, Spring Boot, React, Python, Oracle, MongoDB and OpenShift, • Familiarity with test automation, • Familiarity with object-oriented programming and REST web services, • Familiarity with relational databases, • Familiarity of Agile/Scrum methodologies Mindex Perks • Tickets to local sporting events, • Teambuilding events, • License to Udemy online training courses, • Growth opportunities The salary for this job is $22/hour. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor, or take over, sponsorship of an employment Visa at this time. Physical Conditions/Requirements • Prolonged periods sitting at a desk and working on a computer, • No heavy lifting is expected. Exertion of up to 10 lbs.

Job DescriptionJob Summary Vanteon is seeking applicants for senior-level embedded software roles, including as Principal Embedded Engineer and Senior Principal Embedded Engineer. The specific level will be dependent on the applicant's level of experience. The position will design and develop Petalinux Board Support Package and MAC layer communications firmware for custom hardware. Specific platforms would include the Xilinx Zynq ARM and ADI ADRV900X Transceiver platforms. Duties/Responsibilities The following is a list of expected duties to be involved in this position, this is not fully inclusive, and management may assign other duties: • Analyze system for identification of use cases and development of System Requirement Specifications., • Design and implement embedded software, device drivers, and board support packages., • Investigate and propose project-related technologies to meet requirements., • Create technical documentation including Software Requirements Specifications, Design Documents, Test Summary Reports, and development notes., • Collaborate with hardware engineers for design and integration efforts., • Define and execute engineering verification and acceptance criteria tests.Required Skills & Knowledge, • Experience in real-time embedded systems software development for Linux, RTOSs, MAC sublayer, multi-threaded programming, distributed design, device drivers, hardware diagnostics, BIOS, interrupt handling and boot loader development., • BSP creation and new hardware bring-up for bare-metal, RTOS, and Linux platforms, • Proficiency with C, C++ and ability to work with assembly level for embedded microprocessors and/or DSPs, • Advanced object-oriented design approaches to reusable software systems design, • Experience using embedded tools such as compilers, debuggers, ICE, Emulators, • Make and version control systems experience, • Interface hardware/software design experience, • Proven track record of successful product completion and deployment, • Excellent analytical and communication skills, • Highly motivated, well organized self-starterDesired Skills, • Xilinx Petalinux bring-up, customization, and Zynq hardware integration, • ADI ADRV9002 configuration and control, • OpenAmp, • Linux Yocto build recipes, • Linux kernel and application software development, • Linux Ethernet driver stack configuration and routing (OpenWRT, etc.), • Linux virtual machine & docker container development, • SE Linux, • Linux IMA, • TPM integrationEducation and Experience, • BS EE/CE/CS/SE, • 5+ years' experience in embedded systems softwareOther Requirements, • Training and regular duties require a physical office presence. Although Vanteon will comply with all NYS/Federal requirements related to COVID-19, candidates will be expected to work on-site., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Please note that all offers for hire are contingent on passing e-verify, background, and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job DescriptionDescription: As a Senior Embedded Software Engineer, you’ll architect firmware for ARM-based systems running FreeRTOS, lead VHDL development for Lattice processors, and guide our toolchain (Jira, GitHub, CI/CD). You’ll oversee software design tool development and lead a team of 3-4 engineers based in either Rochester, NY or Penang, Malaysia, driving induction heating solutions. We seek a self-starter with a strong work ethic, agile mindset, and leadership skills. Responsibilities • Architect, develop, and optimize C code for complex embedded systems on ARM processors with FreeRTOS or similar operating systems, ensuring performance, reliability, and power efficiency., • Recommend system components and frameworks for next generation platforms, • Maintain through documentation for software, ensuring clarity for both current and future projects., • Lead VHDL design and updates for Lattice processors to support FPGA-based critical functions., • Spearhead the setup of Jira, GitHub, and CI/CD pipelines for secure, efficient workflows., • Develop and deploy software design tools to enhance team productivity and development processes., • Debug and troubleshoot complex firmware issues using tools like oscilloscopes, logic analyzers, and JTAG., • Mentor junior engineers, conduct code reviews, and enforce best practices for high-quality code., • Collaborate with multidisciplinary teams to define system requirements, develop software architecture, and ensure seamless hardware-firmware integration., • Stay current with industry trends to drive innovation in firmware and tool development.Requirements:, • Bachelor’s or Master’s degree in Computer Engineering, Electrical Engineering, Computer Science, or related field., • 5-10 years of experience in firmware development for embedded systems., • Expert-level C programming for real-time, resource-constrained systems., • Deep experience with FreeRTOS and peripheral interfaces (e.g., SPI, I2C, UART)., • Proven knowledge of hardware debugging tools (e.g., oscilloscopes, logic analyzers, JTAG) and Git., • Experience with CI/CD pipelines and project management tools (e.g., Jira)., • Strong leadership, mentorship, problem-solving, and communication skills., • Ability to work independently and collaboratively in a fast-paced, agile environment.

Job Description Position:CNC Mill Set-up Operator - PART TIME Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Sets up and may operate horizontal and vertical CNC mills. Requires only general supervision. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Able to read blueprints, • 4th axis experience, • Programming a must, • Know correct speeds and feeds, tooling, design and manufacture of fixtures Specific Duties: • Set up horizontal & vertical CNC mills, • Make proper set-up to give rigidity to work piece, • Work with materials such as cast iron, steel, bronze, brass and other non-ferrous materials, • Hold tolerances of .003 inch, • Manufacture and inspect part to blueprint, • Upkeep daily preventative maintenance log Physical Demands: 1. Must be able to lift up to 50 lbs regularly, 2. Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, 3. May be required to stand for long periods of time, 4. May involve some repetitive motions, 5. Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Allient Inc. is currently seeking an Embedded Software Engineer to join our team in Rochester, New York! Allient-Rochester specializes in advanced motion control and integrated automation solutions that serve OEMs across industries such as aerospace & defense, medical, semiconductor equipment, e-mobility & logistics, industrial automation, and packaging. Apply now! Responsibilities: • Servodrive Development: Design, develop, and optimize embedded motion control and I/O algorithms and systems to meet performance and reliability standards., • EtherCAT Expertise: Utilize your in-depth knowledge of EtherCAT protocols to design and implement real-time communication systems, ensuring efficient and reliable data exchange between controllers and drives., • Product Architecture: Develop product architecture to establish frameworks for product development and address product sufficiency., • Testing: Create and maintain verification and regression tests for all aspects of the design of products developed by the team., • Fieldbus Technology: Apply your general expertise in Fieldbus technologies to integrate and optimize communication between our products and those utilizing other fieldbus technologies such as CANopen, Modbus/TCP, Ethernet/IP and PROFINET., • Technology Integration: Research and integrate new technologies to support product development., • Vendor Coordination: Coordinate technologies with industry partners and vendors; interface with vendors to select/customize purchased software, support programs, and hardware such as single board computers., • Development Cycle Management: Lead and engage in all aspects of the product development cycle including design, implementation, review, documentation, testing, and maintenance. Investigate product issues for problem resolution and enhancements to existing products., • Experience: 5+ years of professional experience in software engineering with a focus on embedded firmware development, EtherCAT and other fieldbus technologies., • Education: BS Degree in Computer Engineering, Electrical Engineering, or a related field., • Technical Skills Required:, • Expertise in embedded system design and real-time programming., • In-depth knowledge of EtherCAT protocols and real-time communication systems., • Strong understanding of general Fieldbus technologies and their application., • Proficiency with Windows operating system and computer operation; experience with QNX Neutrino or other POSIX-based operating systems is a plus., • Proficiency in C, C++; experience with C# and Python is a plus., • Must be a U.S. person due to ITAR regulations., • Technical Skills Desired:, • Experience in motion control algorithms and systems., • Experience with computer-based industrial automation motion controllers and soft-PLC; programming in IEC 61131-3, related development tools, and Relay Ladder Logic is a plus., • Experience integrating ROS 2 into embedded controllers running an RTOS, with a focus on motion control and servodrive interfacing., • Experience integrating serial encoders (e.g., EnDat, BiSS, SSI) into embedded control systems., • Proficiency in Python., • Ability to design, build, wire, and maintain test platforms used for evaluating electronic components., • Knowledge of FPGA design. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit *Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Sets up and operates all types of press brakes including AMADA RG100 with NC back gagging. Utilizes total length of brake and various tools to form shapes in sheet metal. Works closely with Plant Manager, management and others to accomplish corporate goals. Works with department supervisor with minimal supervision. A Brake Press Set-up / Operator (Class A) sets up new jobs and establishes tooling required while working with Quality Assurance. Plans and alters jobs to allow for maximum production. Helps to design tooling required for jobs. Understands output and the math related to achieve maximum efficiency. Able to set-up jobs by using form calculations. Helps to train both Class B and C level Brake Press employees. Minimum Qualification: • Two - Five years experience operating and setting up press brakes for the sheet metal industry, • High school diploma or equivalent., • Able to read and interpret the most complex drawings to produce acceptable parts (blue print reading Class II)., • Must have knowledge in GD&T tolerance, • Geometry is a plus, • Fluent in written and verbal English, • Must supply own tools Specific Duties: • Set-up / Operate AMADA Brake Press for complex and simple production / prototypes, • Set-up Brake Press for operators at multiple work stations, • Organize work area and all tooling., • Assist in design of special tooling and fixtures., • Help Engineering to determine proper processing., • Coordinate with programming to flat pattern layout., • Gather, preset and install proper tooling and fixtures., • Determine with Quality Control in-process inspection requirements, gauging and measuring devices., • Run first piece and assure conformance to drawing., • Inspect all parts as required by process sheet and drawings, using all types of precision measuring instruments, including coordinate measuring device., • Document inspection data and procedures, • Check tooling wear and change as needed., • Monitor at appropriate intervals production processes to insure continued part compliance., • Suggest and assists in proper material handling and storage in the department, • Monitor production to ensure conformance with process sheet and time standards., • Monitor machine maintenance for lubrication, guarding and cleanliness., • Assist others with processing, methods and work habits to maintain maximum efficiency, • Monitor scrap and rework Required Tool List: • 6” Verniers, • Tape Measure, • Ball Peen Hammer, • Square, • Set Allen Wrenches This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job DescriptionDescription: Please note this position is based in Penang, Malaysia As a Software Engineer, you’ll develop firmware for ARM-based systems running FreeRTOS, edit VHDL for Lattice processors, and support our toolchain (Jira, GitHub, CI/CD). You’ll contribute to software design tool development, collaborating with a team of 3-4 engineers based in Penang, Malaysia to advance induction heating systems. We value self-starters with a strong work ethic and agility. Responsibilities • Develop, debug, and optimize C code for embedded applications on ARM processors with FreeRTOS, ensuring performance and reliability., • Update VHDL code for Lattice processors to enable FPGA-based functionality., • Support the setup and maintenance of Jira, GitHub, and CI/CD workflows for secure, streamlined development., • Contribute to creating and deploying software design tools to optimize development processes., • Troubleshoot firmware issues using debugging tools like oscilloscopes, logic analyzers, and JTAG., • Participate in code reviews, ensuring adherence to best practices and providing constructive feedback., • Collaborate with multidisciplinary teams to meet system requirements and integrate firmware with hardware.Requirements:, • Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science, or related field., • 3-7 years of experience in firmware development for embedded systems., • Strong C programming skills for real-time, resource-constrained environments., • Experience with VHDL and FPGA development, ideally with Lattice processors., • Proficiency with RTOS (e.g., FreeRTOS) and peripheral interfaces (e.g., SPI, I2C, UART)., • Knowledge of hardware debugging tools (e.g., oscilloscopes, logic analyzers, JTAG) and version control (e.g., Git)., • Proactive, with strong problem-solving, analytical, and communication skills., • Ability to work agilely in a collaborative, fast-paced team.