Trabajos Construction & Trades en Arizona - Page 2

Job DescriptionJob Description: Structural Test Technician As a Structural Test Technician, you will play a vital role within an interdisciplinary team, performing a variety of testing procedures including static, dynamic, fatigue, thermal, and vibration testing. Your work will encompass testing a diverse range of items, from small integrated electronic systems to large aircraft fuselages and structures. You will be responsible for operating and maintaining essential testing equipment, thereby contributing to the validation of design decisions. Responsibilities • Execute static, dynamic, fatigue, thermal, and vibration testing as part of an interdisciplinary team., • Test items ranging from small integrated electronics systems to large fuselages, primary and secondary structures., • Operate and maintain thermal chambers, vibration tables, data acquisition systems, and structural testing equipment like Instron equipment., • Build test equipment and execute test procedures to inform and validate design decisions., • Support critical hardware demonstrations with customers as needed., • Travel to test sites as required.Essential Skills, • 2-4 years of professional experience in an engineering technician capacity or similar., • Experience in preparing and executing test procedures with high levels of attention to detail., • Demonstrated hands-on fabrication and assembly skills., • Instrumentation installation and checkout experience, including strain gauge application, sensor calibration, thermocouple install, and cable harness assembly., • Ability to thrive in a fast-paced, demanding, flexible team environment., • U.S. Person status is required as this position needs to access export controlled data and material science.Additional Skills & Qualifications, • Experience with hydraulic pressure equipment, shaker tables, load testing, and Instron specialized testing equipment. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Gilbert,AZ. Application Deadline This position is anticipated to close on Dec 17, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for an Inspector III. Position Summary Inspects and reports on materials, processes and products using variable or attribute measuring instruments and techniques to assure conformance with the Sargent quality standards. Develops Inspection plans, Mentors and provides training for other inspectors as directed. Responsibilities • Ensure safety is the foundation of daily work through vigilance and accountability., • Promote Safety to all team members, Customers and Suppliers., • Perform, in-process and final inspections on complex machined parts and detailed final assemblies., • Perform receiving inspection on incoming product., • Proficient in dimensional inspection using all inspection tools to include optical comparators., • Is proficient in the use of CMM's and Vision Systems to include limited programming., • Interpret drawings, certifications and military/industry specifications. The ability to apply GD&T., • Create and complete first articles to AS9102., • Trains and mentors less experienced inspectors., • Performs Supplier Source Inspection as assigned., • High School Diploma or GED., • Experience in an ISO9001/AS9100 manufacturing environment., • A minimum of 6 years of experience in a manufacturing environment with demonstrated mechanical inspection background., • Advanced measurement skills using micrometers, calipers, height gages, bore gages and optical comparators., • Minimum 3 years' experience operating CMM's., • Advanced GD&T understanding., • Ability to read and interpret drawings and specifications., • Must possess basic math skills and have good reading comprehension., • Basic computer skills., • Proficient with applicable computer programs, including Microsoft Excel, Word and Outlook., • Must be able to make decisions, communicate effectively and work with others., • Must be a team player, self-starter, problem solver and adaptable., • An AS degree in Applied Technology with Quality Assurance or other applicable technical discipline., • 8 years of Quality Assurance experience in and ISO9001/AS9100 manufacturing environment., • ASQ Certified Quality Inspector. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/Vet/Disabled #zr

Job Description It’s your career, give it wings! Who we are and where we are going: Ascent Aviation Services is one of the largest aviation maintenance, repair, overhaul, storage and reclamation operations in the world. Our strength comes from our talented and professional employees who excel through teamwork and enthusiasm. Ascent Aviation Services continues to grow and are continually looking for motivated and career minded aviation professionals who will support our vision and goals. We are actively interviewing qualified candidates for a Quality Control Inspector position on our growing team. Whether you’re an experienced A&P mechanic, ready to transition into Quality Control or a seasoned QC professional, we want to connect with you! Guided by our core values of respect, safety, quality, and results, you’ll help uphold the highest standards that keep our operations running smoothly and securely. As a 24/7 operation, we have openings across all shifts, including days, evenings, weekends, and 12-hour schedules. Candidates must be flexible and willing to work any shift based on operational needs. Some schedules may qualify for shift differential. Overtime—both scheduled and unscheduled, including holidays—may also be required. DUTIES/RESPONSIBILITIES: • Research technical data and performs inspection of hangered aircraft in heavy maintenance checks, of flightline/storage induction or reactivation and back shop repair/overhaul maintenance activities in accordance with applicable aircraft/component maintenance manuals, FAA regulations and Ascent Aviation policies and procedures., • Enforces Quality Control standards for material shipping and receiving, storage, handling, repairs and overhaul to see that quality, allowable tolerances and other specifications and standards set by the Ascent Aviation and the applicable manufacturer are met., • Performs inspection of aircraft components during their assembly, installation and adjustment phases of incorporation onto an aircraft to ensure that the workmanship and materials conform to the aircraft manufacturers specifications and maintenance manual procedures., • Ensures that all Work-In-Progress is properly documented as to the worked performed and that corrective actions used, have the proper technical data references documented properly in the corrective action block and the work in progress steps., • Records all inspection data on the proper form, report and/or inspection tag and bring to the attention of the Lead Inspector any irregularities in the daily standard practices used that would cause injury to personnel or the aircraft unsafe or unairworthy., • Performs maintenance work/repair of company equipment and general shop housecleaning., • Tests tightness of airframe connections with hand tools and utilizes flashlight and mirror to inspect fit of parts., • Examines assembly, installation, and adjustment of ailerons and rudders to ensure that workmanship and materials conform with Civil Air Regulations, company specifications, and manual procedures., • Determines accuracy of installation of components in power plant and hydraulic system using protractor, micrometer, calipers, and gauges to ensure that specified tolerances are met., • Signs inspection tag to approve unit, or records reasons for rejecting unit., • Logs inspections performed on aircraft., • Ensure that all work performed is done in a safe manner. Directs activities to protect employees from harm and maintain safe working conditions., • Performs facility audits for safety and policy compliance., • Coordinates with customer representatives., • Performs duties of Lead Inspector in his/her absence., • Ensures that proper documentation is made on training record for training received, and signed by Lead, Supervisor, or Manager. YOU WILL GET MORE THAN JUST COMPENSTATION: • 401K with Company Match, • Medical/Dental/Vision Insurance, • PTO - Eligible for 3 Weeks in your First Year, in Addition to 7 Paid Company Holidays, • Company-Provided Short-Term Disability, Long-Term Disability, and Life Insurance, • Strong organizational and planning skills with the ability to meet deadlines, • High attention to detail and accuracy, • Proficiency in reading, writing, and understanding the English language Minimum Requirements: • A&P License (valid and current) Preferred Requirements: • High school diploma or equivalent, • Ability to sit, stand, and walk for extended periods of time, • Frequent bending, stooping, squatting, crouching, kneeling, balancing, and reaching above shoulder level, • Occasional crawling, climbing, lifting, carrying, pushing, or pulling up to 50 lbs. unassisted, • Requires eye-hand coordination and manual dexterity, • The work location includes the Aircraft Maintenance Hangar and the Flightline., • Potential hazards include exposure to materials identified on the Safety Data Sheets, sudden changes in temperature, high intensity noise levels, electrical charges and radar waves, and working around moving machinery., • May be required to work at both Marana, AZ and Tucson, AZ locations as business needs dictate., • Employees are responsible for performing their duties in accordance with company policies and government regulations. These rules are written in the interest of preserving the lives and the resources entrusted to each employee, and when the rules are violated, the risk of a mishap is usually increased., • Employees shall participate in safety education programs and train to recognize hazards on the job and how to report them promptly. As a condition of employment, each member of Ascent Aviation agrees to report errors, incidents, and accidents honestly., • An employee who observes an unsafe action or condition should bring it to the attention of supervisors and managers. Certain conditions may allow the employee to easily correct or condition a situation. Ascent Aviation Services is dedicated to fostering an inclusive work environment. We provide equal employment opportunities and are committed to making reasonable accommodation for qualified individuals with disabilities to enable them to perform the essential functions of their job. If you require any accommodation during the application or interview process, please let us know. EEO/AA/F/M/VET/DIS

$30.00 / hr Full Time 2 Weeks Paid Vacation Referral Bonuses Career development and opportunities for advancement Maintenance Associate is responsible for maintaining facilities in safe operating condition; addressing immediate operational and/or safety concerns; and monitoring and maintaining refrigeration units and kitchen equipment in all SSP America units. This role will be reporting directly to the Maintenance Manager and Director of Operations. Essential Functions Coordinate with Restaurant managers and outside vendors for the purpose of resolving equipment problems and maintenance. Install system component parts (e.g. refrigeration systems, plumbing, electrical and gas kitchen equipment, kitchen appliances, etc.) for the purpose of providing a safe and workable environment. Maintain company vehicle, tools and equipment for the purpose of ensuring availability in safe operating condition. Monitor kitchen equipment and refrigeration units for all units (e.g. observes and listens to equipment, etc.) for the purpose of ensuring that items are operating in a safe and efficient manner. Perform a variety of preventive maintenance activities (e.g. filters, belts, thermostats, etc.) for the purpose of maintaining items in an operative and safe condition. Prepare written materials (e.g. repair status, activity logs, open/punch list, etc.) for the purpose of documenting activities and/or conveying information. Prioritize work orders (e.g. importance, location, etc.) for the purpose of ensuring equipment is repaired in an efficient and effective manner. Repair a variety of commercial kitchen system components for the purpose of ensuring items are in a safe working condition. Request equipment, parts and supplies for the purpose of maintaining inventory and ensuring availability of items required to complete the necessary installation and/or repair. Respond to emergency situations during and after hours for the purpose of resolving immediate safety concerns. Transport a variety of tools, equipment and supplies for the purpose of ensuring the availability of materials required at job site. Perform other related duties as assigned for the purpose of ensuring the efficient and effective functioning of the work unit. Support SSP business and objectives Other duties as assigned Skills: High School diploma or GED certified with 3-5 years’ experience in Food/Beverage maintenance or related experience and/or equivalent combination of education and experience Demonstrate knowledge of safety standards and handling hazardous materials Demonstrate knowledge of operating equipment used in skilled trades, power and hand tools, etc. Specific ability-based competencies required to satisfactorily perform the functions of the job include: adapting to changing work priorities; developing effective working relationships; displaying mechanical aptitude; and working under time constraints Valid Driver’s License & Evidence of Insurability EPA 608 required Ability to be proactive and self-directed with an enthusiastic outlook Flexibility to support various operations works activities during busy seasons Ability to deal with high stressful situations and exercise sound judgment and decision making Flexible schedule as business demands. Regular office attendance required

Host Healthcare is seeking a travel CVOR Technologist for a travel job in Prescott, Arizona. Job Description & Requirements • Specialty: CVOR Technologist, • Discipline: Allied Health Professional, • Start Date: 12/24/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days We are on a mission to help others live better and we do this by helping the healers of the world be as comfortable as possible. With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruiters find your dream position based on what’s important to you. During your assignment, get access to premium benefits, including Day 1 medical that continues up to 30 days between assignments, 401K matching, travel reimbursements, dedicated housing support, and more. We also offer 24/7 support from our team and access to our on-staff clinicians so you can feel comfortable and confident throughout your entire assignment. Travel comfortably with Host Healthcare. Benefits • Referral bonus, • School loan reimbursement, • Vision benefits, • Wellness and fitness programs, • Company provided housing options, • License and certification reimbursement, • Life insurance, • Medical benefits, • Mileage reimbursement, • Pet insurance, • Discount program, • Employee assistance programs, • Guaranteed Hours, • Health savings account, • Holiday Pay, • 401k retirement plan, • Continuing Education, • Dental benefits

Job DescriptionSalary: $19.00/ Hour PVB Fabrications, Inc. (PVB), a direct-hire, multi-disciplined industrial construction, and metal fabrication company is seeking a Helper 3 (Core Technician) to support our client's mining geological Core Logging Facility. This position is regulated by Mine Safety & Health Administration (MSHA) but it's not an active mining operation. Type: Full-Time Base Work Location: Tucson, AZ (Near I-10 & Wilmot) Hourly Rate:$19.00 Anticipated start date: 01/19/2026 Essential Functions and Responsibilities • Photographing geological core samples, • Moving/Handling geological core samples, • Prepping/Shipping, • Splitting, sampling, and palletizing drill core and other geological material in support of company operations, • Data entry using Microsoft Excel/Word Qualifications (REQUIRED) • Must pass pre-employment substance abuse testing., • Basic Computer skills, • Have a minimum of 1 year experience in a heavy industrial workplace., • Must be flexible with schedule and ability to work at various local sites if needed. Skills/Abilities • Must have knowledge of and experience using Microsoft Office software, • Some travel to other worksites outside of the Tucson area may be required, • Must be able to lift up to 35-50 lbs., • Must be able to stand for long periods of time, • Ability to effectively communicate in English, both in writing and verbally Schedule Must be flexible! • Four (4) Ten (10) hour days, • Monday-Thursday or Tuesday-Friday (Assigned by the client after hire), • Schedules are assigned by the client and may change based on production requirements., • Other potential schedules could includeWednesday-Saturday or Sunday-Wednesday. Benefits • Voluntary Benefits such as Medical/Dental/Vision/STD/LTD/Life Insurance, • 401(k) retirement program with company match, • 8 paid holidays/year, • Paid time off

Job DescriptionMechanic / Parts RunnerWe are seeking a dependable and motivated Mechanic / Parts Runner to join our team. This role is essential in supporting our maintenance operations by ensuring timely delivery and pickup of parts, assisting mechanics, and maintaining organization within the shop. The ideal candidate is detail-oriented, responsible, and able to work efficiently in a fast-paced environment.Responsibilities: • Pick up and deliver parts, tools, and equipment to and from job sites, suppliers, and vendors., • Assist mechanics with basic maintenance tasks and repairs as needed., • Maintain accurate records of deliveries, receipts, and inventory., • Keep the shop, vehicles, and storage areas clean, organized, and stocked., • Inspect vehicles and equipment for safety and report any issues promptly., • Communicate effectively with the shop foreman, mechanics, and project teams to ensure timely parts availability., • Follow all safety protocols and company policies at all times., • Provide general support to the maintenance department as required.Requirements:, • Valid driver’s license with a clean driving record (required)., • Previous experience in construction, mechanics, or a related field preferred., • Strong organizational and time-management skills., • Ability to lift and move parts or tools up to 50 lbs., • Reliable, punctual, and able to work independently or as part of a team., • Excellent communication and interpersonal skills.Benefits:, • Competitive pay based on experience., • Health, dental, and vision insurance., • Retirement savings plan with company match., • Paid time off and holidays., • Opportunities for growth and advancement within the company.Join our team and play a vital role in keeping our equipment and operations running smoothly! Apply today to become our next Mechanic / Parts Runner.

Job Description RESPONSIBILITIES: • Ensuring vehicles are maintained, safe, & clean, • Acquire parts as needed from vendors, • Logging inventory as needed, • Keeping work area clean and safe, • Working on other projects and tasks as assigned by supervisor QUALIFICATIONS • Valid driver's license required, • The ability to solve problems, • Excellent communication skills, • The ability to work well as part of a team, • Willing to work in non-climate-controlled conditions, • Basic computer skills, • Regular, predictable, full attendance is an essential function to the job, • While performing the duties of this job, the associate will be required to move frequently, stand, walk, and sit. The associate is frequently required to use hands to touch, handle, and feel, and to reach with hands and arms. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Medical Insurance offered after 30 days 40hrs PTO after one year Compensation: DOE/ paid weekly

Job DescriptionBenefits: • Health insurance, • Paid time off The Position: • Pack, move and unpack personal items from a home or business, • Inventory and load the work vehicle with equipment, products, and supplies needed for each project., • Supervising crew members on a jobsite, • Use moving equipment & packing materials, • Move boxes and furniture onto trailers to enable cleanup of property., • Unload trailers and ensure proper placement of items in the warehouse., • Properly document items during the pack-out process, • General on-location cleaning, • Specialized cleaning at the warehouse, • Be respectful of customers home, time, and property, • Perform end-of-day/end-of-job cleanup and breakdown. Leave the jobsite with a clean and orderly appearance., • Drive & operate large box truck (CDL not required), • Forklift experience a plus, • Warehouse knowledge of wood vaults/racking & palletizing, • Flexible schedule to work some nights or extended hours, • Strong organizational skills, • Strong problem-solving & prompt decision-making ability, • Time management & ability to meet deadlines, • Must possess an understanding of Microsoft office, Google suite functions, and CRM programs., • Maintain a clean and organized vehicle and clean equipment appearance. Physical Demands: * Be exposed to various indoor & outdoor working conditions; change of environment such as with or without air conditioning and heating • Stand, walk, lift, squat, crawl & crouching required, • On occasion, moving/carrying construction materials and supplies weighing in excess of 50 pounds., • Use of ladders will be required for cleaning structures above ground level

Job Description SUNLAND ASPHALT Build your career from the ground up. Come join our Award Winning Team. Sunland Asphalt & Construction, LLC. strives to recruit top talent and we are committed to help you grow both professionally and personally. We are confident you will find our Company a dynamic and rewarding place in which to work because here at Sunland Asphalt our vision is: 'To be the best place in the world to work.' Voted as one of Phoenix Business Journal's 'Best Places to Work,' Sunland offers employees: • Competitive Weekly Pay and Paid Time Off, • 401(K), • Work/Life Balance and Community Involvement, • Comprehensive Health Benefits including; Health, Dental, Vision, • Award Winning Peers & Projects, • And A Foundation Built on Safety POSITION PURPOSE The Grade Checker set grade stakes to guide earth moving equipment operators in sloping highways and fill embankments. Grade checkers may also perform a variety of physical tasks to include operating heavy equipment and machinery and using power tools and/or hand tools as defined by each job/project. ESSENTIAL DUTIES AND RESPONSIBILITIES • Employee shall perform all duties and responsibilities with Sunland's Core Values at the forefront., • Sets grade stakes to guide earth moving equipment operators in sloping highways and fill embankments, using measuring instruments and hand tools: Reads survey stakes along highway right-of-way to determine grade specification for embankment, • Measures horizontally and vertically, in specified ratio, from survey stake to juncture of embankment and initial excavation, using survey rod and eye level., • Sets grade stakes, using hatchet, and chalk-marks excavation reference points on stake., • Repeats measuring and staking at specified intervals to form horizontal stake lines along embankment., • Observes excavating activities to verify conformance to stake references and notifies equipment operators or supervisor of deviations., • Must be a strong communicator and be in constant contact with the earthmovers, paver operators, truck drivers and general laborers., • Must work quickly, productively and safely to meet production goals as outlined by the Foreman, Superintendent and/or Production Manager and concerning daily production schedule., • Must be an advocate of safety and follow safety policies and procedures., • Actively participate in job-site and safety meetings and all Company related training., • Inspect, clean and maintain equipment and machinery., • May set up and tear down equipment., • Maintain a clean job site; pick up all tools, equipment, and secure job site each day., • Understand material handling and storage in compliance with SDS sheets., • Coordinate and work with contractors, sub-contractors and vendors to complete job., • Serve as front-line Company representative and must provide excellent service to the customer and to the public., • Use equipment and/or an assortment of hand tools such as rakes, shovels, wheel barrels, etc., • Perform all other general laborer work as needed., • Any and all other duties assigned. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. SUPERVISORY RESPONSIBLITIES • This position has no supervisory responsibilities. COMPETENCIES • C ustomer Focus - Customer Orientation, • O wnership - Results Driven, Performance, Time and Stress Management and Composure, • R elationships - Teamwork Orientation, Diversity and Inclusion, • E thics - Honesty, Integrity, Do the Right Thing, • S AFETY - The Foundation of Everything We Do Safety • This position is considered a safety-sensitive position and is subject to the company's drug and alcohol policy, as well as all OHSA regulations., • All employees must wear the appropriate personal protective equipment (PPE)., • Serves as a safety ambassador by complying with federal, state and local laws, as well as Company safety policy, enforces safe work practices, and proactively identifies and remedies worksite hazards. Physical Demands and Work Environment • This position operates at professional construction sites, requiring the ability to communicate with verbally others on site, in person and over the telephone, ability to read printed materials, signs and directions, stamina to maintain attention despite interruptions, ability to lift, push, pull, carry, handle or feel objects, supplies, tools, machinery and/or controls weighing up to 50 pounds and reach with hands and arms; climb stairs and/or ladders; balance, bend, stoop, kneel, crouch, crawl, lift overhead, traverse around or otherwise position one's self around the required work and safety requirements to navigating and perform activities on various construction sites in a safe manner., • Will be required to work on project sites and operate vehicles, trailers, machinery, equipment and other tools within local, state and federal safety guidelines., • This position operates in a professional field environment. The position requires working outside, frequently for long periods of time in all weather, including extreme hot and cold temperatures., • While working, the employee might be exposed to various chemicals, vapors, pollutants, virus or other air-borne pathogens, gases, uneven surfaces, loud noises, moving vehicles or machines and dust/debris. POSITION TYPE/ EXPECTED HOURS • This is a full time position. Occasional evening and weekend work may be required as job duties demand. TRAVEL Education, Work Experience and Requirements • A high school diploma or GED is preferred., • Six (6) months to one (1) year related experience is preferred., • Must be fluent in English, i.e., must be able to speak, read and write English. Certifications, Licenses, and Registrations • A valid driver's license and a clean motor-vehicle record preferred., • Passing a pre-employment drug and alcohol screening and background check is required. AAP/EEO STATEMENT Sunland Asphalt is an equal employment opportunity employer. Job Posted by ApplicantPro

Job Description • We are hiring immediately for full time ORDER BUILDER positions., • Location: Canteen - 2675 South 12th Place, Phoenix, AZ 85034. Note: online applications accepted only., • Schedule: Full time schedule. Sunday through Thursday or Thursday through Monday, 3:00 pm to 11:30 pm. More details upon interview., • Requirement: Previous warehouse and order pulling experience is preferred. About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Click HERE to see a day in the life of a Canteen Order Builder! You pull, pick and stack. But when you are an Order Builder with Canteen, you are more than that. When our guests are hungry, you provide the things they crave. You make people happy. Come join a hardworking team that is dedicated to the communities we serve. Cash in on growth! You’re a team player and we recognize that. When your team makes more, you will too. On workdays, you can expect to: • Pick fast & pick easy – our smart technology knows exactly how much you need to grab so you will too., • Trash what’s damaged – if it’s popped, beaten, or uneatable, you’ll be the one to toss it., • Skip the gym – you’ll be regularly lifting up to 50 lbs. per day. Dreams of being a manager? As an Order Builder with Canteen, we give you breathing room and space to grow. With us, you’ll gain the skills needed for entry-level management. We want to see you soar. Why work for Canteen? Because you matter to us. At Canteen, we lead our industry by ensuring that wellness, quality and service are our top priorities when working with our trusted clients. But we can’t do this without a hardworking team that supports the same values. We want to encourage an inclusive culture throughout our company where everyone feels like they belong, and we’d love for you to be a part of it. Associates at Canteen are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1489020 Canteen

Care Career is seeking a travel CVOR Technologist for a travel job in Prescott, Arizona. Job Description & Requirements • Specialty: CVOR Technologist, • Discipline: Allied Health Professional, • Start Date: 01/13/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Care Career Job ID #34659670. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Surgical Allied Careers Certified Surgical Tech-CVOR About Care Career Care Career brings together a portfolio of leading healthcare staffing organizations, each delivering specialized talent solutions across the industry. Wherever you want to go, We Make It Happen. With travel nursing jobs across the country, you can discover the possibilities that create the lifestyle and financial position that you have dreamed of. Care Career is a modern, transparent staffing firm creating the ultimate community of US. Benefits • Referral bonus, • Weekly pay, • Medical benefits, • Continuing Education, • Dental benefits, • Vision benefits

MedPro Healthcare Allied Staffing is seeking a travel CVOR Technologist for a travel job in Prescott, Arizona. Job Description & Requirements • Specialty: CVOR Technologist, • Discipline: Allied Health Professional, • Start Date: 01/13/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality CVOR Technician- Cardiovascular Operating Room Technician for a contract with one of our top healthcare clients. Requirements • Graduate of an accredited School of Surgical Technology or 3 years recent experience working as a surgical technician in an acute care setting., • Current CPR provider card., • Must have a minimum of eighteen months of CVOR recent experience or completed clinical orientation specific to the surgical care of the open-heart patient population., • Knowledge of CVOR instrumentation as it relates to specific cardiac surgical procedures and other procedures as needed., • Weekly pay and direct deposit, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Group Health insurance for you and your family, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matching, • Unlimited Referral Bonuses up to $1,000Duties Responsibilities, • Performs treatments per protocols., • Functions proficiently in scrubbing, 2nd circulating, and 3rd person/Heart Holder roles of the CVOR., • Picks supplies for surgeries, sets up instruments and scrubs for surgical procedure, and performs instrument and sponge count accurately., • Obtain specimens, hand over to circulating nurse and verifies location., • Facilitates room turnover time. MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience®. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: OR Technician, Surgical, Technologist, Cardiovascular Operating Room, CVOR *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx000008G6fzEAC. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: CVOR Technologist Surgical: CVOR Tech. About MedPro Healthcare Allied Staffing At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we’ll take care of the rest. As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. Our on-staff clinical support team—alongside a compassionate group of experienced recruiters—provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we’re committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience®, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. Benefits • Day 1 medical, dental, and vision benefits for you and your family, • Weekly pay and direct deposit, • Unlimited Referral Bonuses starting at $500, • On Staff Clinical Support Team, • Access to nationwide travel assignments, • MPX+ Mobile app -24/7 real-time access to jobs, credentials, assignment details, and more, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Tax Free Per Diems, Housing Stipends and Travel Reimbursements, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matchingBenefits, • Weekly pay, • Employee assistance programs, • Referral bonus

Job Description Job Title: Assembler Department: Production Reports To: Production Supervisor Location: Tucson, AZ - Production Facility Job Type: Full-Time Pay Rate: $15.00/hr Position Summary The job of Assembler is responsible for assembling and preparing food products, primarily tamales and burritos, in accordance with established recipes, portion standards, and production procedures. This position plays a key role in ensuring that all products meet Tucson Foods standards for quality, consistency, and food safety. Essential Duties and Responsibilities Assemble and roll tamales, burritos, and related food items with attention to product specifications Operate on a production line to meet daily manufacturing targets and timelines Adhere to food safety regulations and sanitation guidelines at all times Maintain a clean and organized workstation throughout the shift Identify and report any issues with ingredients, equipment, or procedures to the Production Supervisor Assist with other production-related tasks as assigned, including packing or prep work Qualifications Required: Ability to perform repetitive tasks with attention to detail and consistency Willingness to learn and adapt to new processes and procedures. Commitment to quality and safety standards. A positive attitude and willingness to cooperate. Manual dexterity and good hand-eye coordination for assembling foods Ability to work in a team environment and communicate effectively Capable of following written and verbal instructions, including food handling procedures Punctual, dependable, and able to work scheduled shifts Preferred: Previous experience in a food production, food assembly, or other manufacturing environments Experience working on a production line Familiarity with food production equipment and machinery Physical Requirements Prolonged standing (stools are available) and repetitive hand movements required Ability to lift and carry up to 20 lbs on occasion Frequent reaching Ability to work in variable temperatures (hot, cold, and humid environments) Work Environment This position is based in a commercial food production facility where adherence to food safety standards is required at all times. The environment may be fast-paced and requires focus, attention to detail, and the ability to work collaboratively with other production team members. Compensation and Benefits Competitive hourly wage Paid time off Health and dental insurance (for eligible employees Quarterly Bonus Plan Referral bonus program (if applicable) Equal Opportunity Statement Tucson Foods is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Southwest Packout, a division of Advosy, is looking for dependable, hard-working Moving Technicians to join our growing restoration and contents team. This position involves packing, moving, documenting, and transporting household goods and personal property after water, fire, or mold damage. We are hiring for multiple positions ASAP, whether you're just getting started or have experience sketching rooms, documenting contents, and working with insurance carriers, there’s a place for you on our team. Key Responsibilities: Moving & Packout Services • Safely pack, label, and move contents from residential and commercial properties, • Load and unload trucks with care and efficiency, • Follow jobsite safety and cleanliness protocols, • Maintain professionalism when working in customer homes, • Ensure all items are properly labeled and documented, • Follow company standards for inventory control and storage, • Maintain a polite, respectful, and empathetic demeanor with clients, • Clearly explain steps of the process when needed, • Keep tools and packing materials clean and ready for use, • Ensure trucks are stocked, organized, and prepared for each job, • Must be able to lift 50+ lbs and work in a physically demanding environment, • Strong work ethic, punctuality, and dependability required, • No criminal record; integrity and professionalism are essential, • Valid driver’s license preferred, • Experience in moving, packouts, or restoration is a plus Pay: $18.00 – $20.00 per hour, depending on experience. Opportunity to promote into a Lead role up to $22/hour Benefits: • Dental insurance, • Health insurance, • Health savings account, • Paid time off, • 8 hour shifts, • Monday to Friday, • Weekends as needed, • On-call availability may be required for some jobs Contact: Please apply by submitting your applilcation and we will reach out within 24 hours. You may also reach us via phone call to our recruiter, Maria, by calling 480-613-3850 and reference this job posting to set up an interview ASAP.

Job DescriptionA Little About Us Oats Overnight is changing the way people eat breakfast, and since launching in 2016, our high protein spoon-free oatmeal has been enjoyed by over 1,000,000 customers. We are scaling quickly in both direct-to-consumer and retail with the goal of becoming a household brand. We have end-to-end control of all phases of the business, producing and fulfilling the product in-house, which is extremely rare for companies our size. This allows us to create new flavors and products quickly and is a tremendous advantage for our brand – we’re able to give customers a behind-the-scenes look at what we do, highlighting our people and process in content. Being vertically integrated also enables us to incorporate customers directly in the development process. We are not accepting candidates from third-party recruiters or agencies for this role — direct applicants only. What’s The Job? The Order Builder is responsible for the efficient building of orders for our production team, being a partner with our production team and being an all-around support to our operations teams. This is a key role for the efficient running of our warehouse and needs a dynamic, organized and process improvement minded person to fill the role. Schedule: Monday – Friday; 1st shift 6:00 a.m. to 2:30 p.m. What You’ll Be Doing, Stop Scanning and Read This Part • Prepare/pick orders based on work order to accurately build orders for loading onto delivery trucks to be delivered to companies’ production facility., • Build accurate, quality product orders and ensure they are secure for transport after being loaded into the truck., • Capable of operating industrial powered equipment such as pallet jacks and hand trucks., • Able to communicate to multiple departments for overage/shortage of work order items, and for quality checks prior to delivery of order., • Adhere to good manufacturing practices (GMP) and warehouse safety standards., • Ability to use scanners/handhelds/computers/printers., • Responsible for staging completed pallets in designated shipping areas., • Other duties as assignedWhat You’ve Done And Who You Are, • High School Diploma or GED preferred., • Minimum of one year of work experience required., • Must be 18 years or older., • Prior warehouse experience preferred., • Prior experience using pallet jack or forklift preferred. Ability to obtain certification upon hire is required., • Ability to perform basic math for conversion of units of measure., • What We’re Looking For, • Someone that can partner and influence at all different levels, • Not afraid to get out into a manufacturing operations environment to work shoulder-to-shoulder with plant leadership to resolve problems and challenges., • Ability to handle multiple priorities and navigate in a fast-moving environment, • Expectations will be clearly set, but an ambitious approach to the work is key, • Ability to artfully convey even subtle or complex messages clearly, as appropriate for the topic and audience., • A relentless drive to get things done., • Curious and entrepreneurial mindset., • Enjoys working in a highly collaborative and supportive team environment, • Flexible, willing, and quick to learn new processes, new technology, and new ways of thinking. Why You Might Like Working Here, • This is going to be fun., • Casual, friendly culture. We’re serious about what we do but we don’t take ourselves too seriously., • We are a fast-growing company, and you will have stock options., • High growth potential with opportunities to expand, • Free oatmeal. It’s very good. Why You Might Not Like Working Here, • It’s not a cushy job, the bar is high, • We are growing quickly and have a fast-paced work environment. Physical Demands, • Speaking: Constantly (investigates, collaborating with multiple departments, status updates, keeping key partners informed of daily progress of material request), • Mobility: Frequent travel throughout the Oats Overnight Facilities (walking in warehouse and production areas), • Bending/Squatting: Constantly (picking up product, moving product), • Lifting: Frequent- Lift 50 lbs. or less (full cases of product), • Able to be certified on manual and powered pallet jacks or forklifts, • Ability to work in a warehouse environment where temperatures vary with the seasonsThe Perks, • Full Benefits; Medical, Dental, Vision and Life, • Monday - Friday Schedule, • Weekly Pay, • Stock options, every employee is an owner Oats Overnight provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. Oats Overnight complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Duties of the Loader position include, cleaning the feed loading building (all levels), cleaning the bulk flour loading area, taking laboratory samples from all trucks loaded, transporting samples to the laboratory, inspecting all trailers for suitability to load, verifying correct flour is being loaded, accurately completing bills of lading for items loaded, and doing other tasks that routinely and reasonable assigned by the supervisor. Overtime work is frequently expected of persons working this position. This summary of duties and tasks to be performed by the Loader is not intended to be exhaustive. This job description is intended to be representative of duties and tasks that must be performed to be successful in this position. Other duties and tasks may be assigned to maintain a smooth operating environment. RESPONSIBILITIES • Verifying scaled load accuracy against MO’s prior to production runs, • Clean equipment after running each load to prevent cross contamination., • Follow all GMPs, SOPs, and plant safety rules., • Follow the formulas as written and openly communicate any issues or suggestions to improve the operation of the facility., • Must take the leadership role in overall loading of van trailers, • Must pull loading orders from DBC, • Responsible for inspecting trucks to be loaded and proper paper work is filled out, • Responsible for selecting and loading the correct product, • Must manage the order in which trucks are to be loaded and the truck drive sign in sheet, • Must complete forklift certification and be able to efficiently operate a forklift, • Must complete all paper work regarding shipments., • Must maintain warehouse in clean and orderly fashion., • Must maintain forklifts and batteries, • Additional duties and responsibilities may be required of this position SPECIALIZED KNOWLEDGE AND SKILLS Understanding of products used. ESSENTIAL QUALIFICATIONS(BFOQ) Proficient in English speaking, reading and writing Ability to perform basic mathematic computations, including addition, subtraction, multiplication, and division. Ability to accurately record lot required information onto documents. Ability to lift 50 lbs EQUIPMENT AND APPLICATIONS AND WORK ENVIRONMENT Forklift, Blender Physical Demands While performing the duties of this job, the employee is regularly required to stand, use hands to write, handle, or feel; reach with hands and arms; and talk and hear. Employee is frequently required to walk, climb or balance, and must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and ability to focus. Some employees will operate fork lifts and other motorized equipment. Employee will be in close proximity to moving, rotating, and/or motorized equipment. Work Environment The primary work environment is a bulk food manufacturing environment. Daily operations may expose the employee to machinery, airborne particles, dust, and heat. Allergens are present throughout the plant and processes including but not limited to wheat based products, soy products, dairy products, MSG, and other common allergens. Hearing protection is required in certain areas of the plant FOOD SAFETY / SECURITY REQUIREMENTS The Company is committed to producing and delivering defect-free products. To ensure this, all employees are required to be trained on and adhere to the Good Manufacturing Policies set forth by the Company as they pertain to personnel practices, equipment, and facilities. It is also vital that all employees be aware of the work environment and when possible, prevent accidental or intentional adulteration of products produced at this facility. As a result any employee has a right to put product on hold if they have a concern. At the plant level, only the Quality Assurance Manager and General Manager have the authority to release product on hold.

Job DescriptionSalary: About Magnum Bikes: Established in 2010, Magnum Bikes stands at the forefront of the global e-bike movement. From humble beginnings, we have emerged as a rising star in our category, celebrated for our innovation, design excellence, and unwavering commitment to quality. Our mission is to lead the international e-bike market with breathtaking, premium electric bikes that redefine transportation. At Magnum Bikes, we are reshaping the future of sustainable mobility, dedicated not only to the planet but also to enhancing the lives of individuals. We are driving technological innovation to bring sustainable joy and convenience to all through the Magnum e-bike experience. If you're eager to harness the THRILL of Magnum e-bikes and dive into a role brimming with excitement, spontaneous company bike rides, and abundant opportunities for personal and professional growth, we invite you to read on. Job Summary: The Retail Sales Associate & Bike Mechanic is responsible for both assisting customers in our retail store and performing light to moderate bike maintenance and assembly. This hybrid role combines customer-facing sales support with hands-on mechanical work, ensuring that every bike leaving our store is in top condition and every customer enjoys a seamless purchasing experience. Duties and Responsibilities: Customer Interaction: • Greet customers warmly and engage in conversations to understand their preferences and needs., • Provide knowledgeable and enthusiastic assistance to customers interested in e-bikes., • Conduct product demonstrations and test rides to showcase e-bike features and benefits. Product Knowledge: • Stay current on the latest e-bike models, technologies, and industry trends., • Clearly communicate technical specifications, advantages, and unique selling points of each model., • Assist customers in selecting the e-bike best suited for their lifestyle and needs. Sales Process: • Guide customers through the sales process, from initial inquiry to final purchase., • Provide accurate pricing information, explain financing options, and address customer concerns., • Upsell accessories and additional services to enhance the customer experience., • Meet or exceed monthly sales goals as outlined by management. Bike Maintenance & Mechanic Duties: • Perform basic repairs, maintenance, and tune-ups on e-bikes., • Assemble new e-bikes and prepare them for customer delivery., • Inspect bikes for safety and functionality., • Maintain a clean, organized, and safe workshop area. Customer Education: • Educate customers on e-bike benefits, including cost savings, health benefits, and sustainable transportation., • Demonstrate safe and proper use of bikes during test rides and demonstrations. Shop Cleanliness, Safety, and Organization: • Maintain cleanliness and organization of the shop floor, displays, and test ride areas., • Follow safety protocols for both customers and staff., • Assist in inventory management, including restocking, organizing, and keeping track of accessories and merchandise. Administrative Tasks: • Process sales transactions accurately using the POS system., • Maintain customer records and follow up post-visit to ensure satisfaction., • Support store events and promotions as needed. Team Collaboration: • Collaborate with colleagues to create a positive and cohesive work environment., • Share insights on customer preferences and market trends with management., • Work closely with the store manager and sales team on in-store programs and sales initiatives. Qualifications: • Previous retail sales experience, ideally in cycling, outdoor recreation, or a related industry., • Basic knowledge of bike maintenance and repair; e-bike experience preferred., • Passion for sustainable transportation and understanding of e-bike technology., • Strong communication and interpersonal skills., • Ability to work in a fast-paced environment and meet sales targets., • Familiarity with POS systems and basic computer skills., • Ability to lift and maneuver bikes and parts safely. Working Conditions: This role primarily involves working in a retail environment, including weekends and holidays. Comfortable standing for extended periods and lifting/moving e-bikes as needed (80+ lbs). The candidate should also be committed to maintaining a clean, safe, and organized shop environment. Culture: As a company, cultivating a culture of diversity, equity, and inclusion is top on our list. Together, Magnum team members form a powerful and cohesive group of talented individuals overseeing design, manufacturing, importing, inventory management, sales, service and marketing of our products to realize our mission. We care deeply about the professional growth and fulfillment of each and every one of our employees and allowing them to reach their full potentials in our forward-thinking company culture. Our employees enjoy and take pride in a fast-paced, collaborative, creative, and positive work culture. Why you will love working at Magnum Bikes: • We are leaders Leadership is not limited to our management team. Its something everyone at Magnum embraces and embodies., • We are operators We believe the only way to predict the future is to build it. Creating solutions to lead our company and our industry is what we do on every project, every day., • We are learners Everyone here is continually learning on the job, no matter if weve been in a role for one year or one minute. We are committed to learning and implementing what is best for our retail customers, suppliers, distributors, as well as the Magnum team., • We are one team The magic of Magnum Bikes is our people, together making our inspiring goals attainable and driving us to greater heights. Equal Employment Opportunity (EEO) Compliance Statement: Magnum Bikes is an equal opportunity employer. We are committed to providing an inclusive and diverse workplace where all employees and applicants are treated with respect and consideration. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. We strive to create an environment that promotes equal employment opportunities and prohibits unlawful discrimination or harassment of any kind. All employment decisions at Magnum Bikes, including recruitment, hiring, promotion, and all other terms and conditions of employment, are based solely on individual qualifications, job requirements, and business needs. We encourage applications from candidates of all backgrounds and experiences to join our team and contribute to our diverse and inclusive workplace. We are committed to providing reasonable accommodations for qualified individuals with disabilities in our application process and during employment, as required by applicable laws. If you require accommodation or assistance to complete the application process or participate in an interview, please contact . We will work with you to ensure your needs are met. By joining our team, you are aligning yourself with an organization that values and promotes diversity, equality, and inclusion. Your unique perspectives and experiences are essential in helping us achieve our mission and create a welcoming and supportive work environment for all.

Job Description SCI, a Congruex Company, is looking for a CDL Driver to join our construction team. Learn more about our operating unit at . Who is Congruex Congruex designs and builds broadband and wireless communications infrastructure. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. We deliver turn-key network solutions under a single platform by aligning our engineering and in-market construction operating units. Our vision is to be the best end-to-end provider of network services in the U.S. and our core values of GRIT connect everything we do. We are building tomorrow, together. Will you join us? Your New Job Job Summary: Our operating unit provides underground utility services, and we are looking for a CDL Driver to join our team. This position requires organization, timeliness, accuracy and great focus to detail and safety. Job Responsibilities: • Drive truck requiring a CDL., • Complete DVIR Daily., • Help crew with labor if needed when not driving., • Volumetric Cement Truck Experience Required., • Valid Class A CDL Required., • DOT Med Card Required., • Lifting 50 to 75lbs, • Must have great communication skills., • A positive can-do attitude and openness to trying things new ways., • Medical, Dental & Vision Benefits, • 401(k) Program with a Company Match, • 10 paid Holidays, • Paid Maternity & Parental Leave, • Paid Basic Life Insurance & Voluntary Options, • The pillars of Congruex culture are GRIT, safety, inclusion, and family. The Fine Print: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to employees in similar roles. Some benefits have eligibility criteria. All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. This document does not create an employment contract, implied or otherwise, other than an "at-will" employment relationship. SCI, a Congruex Company, is looking for a CDL Driver to join our construction team. Learn more about our operating unit at . Who is Congruex Congruex designs and builds broadband and wireless communications infrastructure. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. We deliver turn-key network solutions under a single platform by aligning our engineering and in-market construction operating units. Our vision is to be the best end-to-end provider of network services in the U.S. and our core values of GRIT connect everything we do. We are building tomorrow, together. Will you join us? Your New Job Job Summary: Our operating unit provides underground utility services, and we are looking for a CDL Driver to join our team. This position requires organization, timeliness, accuracy and great focus to detail and safety. Job Responsibilities: • Drive truck requiring a CDL., • Complete DVIR Daily., • Help crew with labor if needed when not driving., • Travel is required for this position., • Valid Class A CDL Required., • DOT Med Card Required., • Lifting 50 to 75lbs, • Must have great communication skills., • A positive can-do attitude and openness to trying things new ways., • Previous experience driving vehicles requiring a Class A CDL., • Medical, Dental & Vision Benefits, • 401(k) Program with a Company Match, • 6 paid Holidays, • Paid Maternity & Parental Leave, • Paid Basic Life Insurance & Voluntary Options, • The pillars of Congruex culture are GRIT, safety, inclusion, and family. The Fine Print: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to employees in similar roles. Some benefits have eligibility criteria. All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. This document does not create an employment contract, implied or otherwise, other than an "at-will" employment relationship. SCI, a Congruex Company, is looking for a CDL Driver to join our construction team. Learn more about our operating unit at . Who is Congruex Congruex designs and builds broadband and wireless communications infrastructure. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. We deliver turn-key network solutions under a single platform by aligning our engineering and in-market construction operating units. Our vision is to be the best end-to-end provider of network services in the U.S. and our core values of GRIT connect everything we do. We are building tomorrow, together. Will you join us? Your New Job Job Summary: Our operating unit provides underground utility services, and we are looking for a CDL Driver to join our team. This position requires organization, timeliness, accuracy and great focus to detail and safety. Job Responsibilities: • Drive truck requiring a CDL., • Complete DVIR Daily., • Help crew with labor if needed when not driving., • Travel is required for this position., • Valid Class A CDL Required., • DOT Med Card Required., • Lifting 50 to 75lbs, • Must have great communication skills., • A positive can-do attitude and openness to trying things new ways., • Medical, Dental & Vision Benefits, • 401(k) Program with a Company Match, • 6 paid Holidays, • Paid Maternity & Parental Leave, • Paid Basic Life Insurance & Voluntary Options, • The pillars of Congruex culture are GRIT, safety, inclusion, and family. The Fine Print: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to employees in similar roles. Some benefits have eligibility criteria. All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. This document does not create an employment contract, implied or otherwise, other than an "at-will" employment relationship.

Job Description Overview The PCT, including all hospital units and departments and the Float/Flex Pool PCT, under the supervision of the charge nurse, clinical manager, and/or director, is responsible for assisting in patient care, documentation and supply management. PCTs keep the unit supplied, clean, and organized. Additionally, the PCT may function in an office assistant role and answer the telephone, answer questions within their capabilities the patient or their support individuals may have, and perform data entry and data collection. The PCT in the discharge unit is for assisting discharged patients, coordinating discharge logistics and assisting patients in utilizing resources and accessing health related services. The PCT in the Labor Delivery and Post Partum Breastfeeding Center does not provide direct patient care. The PCT follows all policies and procedures of Northern Arizona Healthcare. They perform or assist with procedures that fall within the scope of practice of a PCT, and work closely with all members of the interdisciplinary team. The PCT may be caring for infants, children, adolescents, adults and geriatrics populations. The Float/Flex Pool PCT may be asked to work on any unit in the hospital that is in need of a PCT, change departments during a shift or be asked to work as a Patient Safety Attendant based on need whereupon the PCT duties will cease if assigned to sit 1:1 with a patient; and must complete the same required documentation as a PSA. Call will be required for the Float/Flex Pool PCT. This position's location is on site only. Responsibilities Patient Care • Maintains department cleanliness including following procedures for clean up after treatments., • Assists with transfer of patient with restrictions in weight bearing or impairment of motor status., • Assists with patient transfers to or from wheelchairs as needed., • Assists patients with donning/doffing compression garments as needed., • Observes patient for skin integrity and report any problem areas to supervising clinicians., • May assist with removal of catheters and IVs and also assist with phlebotomy within scope of practice., • Prioritizes and problem solves to meet changes in patient status/condition., • Collaborates with physicians and other health care professionals to ensure staffing patterns meet appropriate skill necessary for quality patient care., • Quickly and accurately assesses patient care needs., • Serves as a resource, assists other staff in caring for patients, assists physician with order entry into EMR as needed., • Assists with dressing removal as assigned by supervising clinician., • Assists patients with activities of daily living such as toileting as needed., • Assists patients with mobility under the direction of supervising clinician including but not limited to therapeutic exercises., • Follows guidelines for safety with regard to isolation precautions and all policies/procedures dealing with blood borne pathogens. Discharge PCT • Assists patients in and out of vehicles as needed., • Supports and reinforces discharge instructions., • Collaborates with interdisciplinary team and community agencies., • Uses the EMR for documentation and communication purposes., • Assists with securing DME as necessary. Labor Delivery Post Partum Breastfeeding Center • Breastpump rental program bookkeeping (ie invoices for payment), run payment for breastpump rental, invoice monthly or quarterly pumps that are rented, track billing of rental and maintain copies of rental contracts and End of Month billing, log of receipts to accounting ., • Contact patients regarding breastpump rental and billing and manage Breastpump rental system., • Ereq order supplies breastfeeding center and nursery., • Liaison with Breastpump supplies and Breastpump company., • Clean and restock breastpumps to breastfeeding center., • Telephone triage with families regarding breastfeeding., • Maintain department cleanliness., • Assists in transporting equipment and supplies. Administrative • Answers, evaluates and prioritizes incoming administrative line telephone calls, communicates effectively with callers obtaining complete and accurate information to determine the need(s) of the caller., • Assists in orientation and training of new PCT staff., • Works to ensure best practice among colleagues., • Maintains unit documents ., • Maintains charts and copies charts as requested., • Assists charge nurse with clerical duties., • Documents objective patient data and the care they provide. Documents reporting of abnormal findings to supervising clinician. Education • Demonstrates understanding of the Unit's Standards of Care and Practice and Administrative Policies as well as being able to locate Policy and Procedures manual on the assigned unit., • Focuses on personal development areas, engaging in professional/collegial interactions with peers and students., • Demonstrates and utilizes the guidelines of care and practice via the nursing process, and in accordance with Arizona State Board of Nursing Laws and Regulations, being able to perform at a fully competent level. Compliance/Safety • Responsible for reporting any safety-related incident in a timely fashion through the Midas/RDE tool; attends all safety-related training programs; performs work in a safe manner; monitors work environment for possible safety issues and ensures others are also performing work in a safe manner., • Stays current and complies with state and federal regulations/statutes and company policies that impact the employee's area of responsibility., • If required for the position, ensures all certifications and/or licenses are up-to-date and valid prior to expiration dates., • Completes all company mandatory modules and required job-specific training in the specified time frame. Qualifications Education High School Diploma or GED- Required Graduate of a Nursing Assistant Program- Required Certification & Licensures Current, unrestricted CNA or LNA license in the State of Arizona- Required Basic Life Support (BLS)- Required Fingerprint Clearance: If employee does not have an Arizona LNA license: • Fingerprint Clearance Card application number - Required upon hire, • Fingerprint Clearance Care - Required within 90 days from date of hire Employee will obtain and maintain appropriate clinical competencies for the roles assigned by their departmental leader. Experience For Discharge PCT: • Demonstrates ability to collaborate with interdisciplinary team and community agencies with patient care and care management., • Demonstrates ability to utilize the EMR for documentation and communication purposes., • Possesses and demonstrates knowledge of available community resources., • Demonstrates an understanding of post-discharge resource planning. Healthcare is a rapidly changing environment and technology is integrated into almost all aspects of patient care. Computers and other electronic devices are utilized across the organization and throughout each department. Colleagues must have an understanding of computers, and competence in using computers and basic software programs.

Job Description About the Role We are looking for a reliable Construction Site Assistant to support our team at a large construction site in Queen Creek, AZ. This role is a mix of field work and on-site office support, ideal for someone who is organized, hands-on, and enjoys a fast-paced environment. You will assist with purchasing materials, transporting items in and out of the site, and supporting daily administrative tasks for our project team. Key Responsibilities • Pick up, drop off, and transport materials, tools, and equipment, • Assist with purchasing supplies and coordinating deliveries, • Bring items to and from the construction site as needed, • Support office tasks such as organizing documents, receipts, and inventory, • Help maintain cleanliness and organization in jobsite areas, • Communicate with vendors, site supervisors, and team members, • Perform general support duties to keep site operations running smoothly Requirements • Valid driver’s license and reliable personal transportation, • Ability to lift 30–50 lbs as needed, • Comfortable working both indoors (office) and outdoors (site), • Strong communication and time-management skills, • Basic computer skills (Excel, email, etc.) preferred, • Must be authorized to work in the U.S. Preferred Qualifications • Previous construction or field support experience, • Bilingual (Korean/English) is a plus but not required, • Experience with materials handling, purchasing, or logistics Benefits • Competitive hourly pay, • Overtime opportunities, • Stable Monday–Friday schedule, • Opportunity to gain experience in both construction operations and office administration Company DescriptionCompany specializing in basic factory design and setupCompany specializing in basic factory design and setup

Job Description Come work for a family-owned company that truly cares for their employees! We strive for a drama FREE environment. A Place where everyone is treated with respect. This is not your average job. No sitting at a desk all day. No customer service. This job is physically demanding, but no need to walk on eggshells. Come to work, be yourself, be a team player, and have fun! • Competitive Pay, • Career Advancement, • Fun work environment, • Commercial cleaning and event clean up, • Company car provided for each team, • Teams consist of 2-3 people, • Evening/Overnight hoursShifts, • 4-5 nights a week (Some weekend nights required), • Working hours between the hours of 6pm-3am, • Shifts are normally 6-7 hours long Job Summary We’re looking to hire a hard-working cleaner who can clean in a fast-paced environment. The ideal candidate has a great work ethic, is reliable and shows up for work on time, takes pride in a job well done, takes criticism well, a true team player, someone looking for a long-term position, brings no drama and is truly a good person and gets along with everyone! Responsibilities • Loading the work vehicle with all supplies needed, • Clean bathrooms, • Empty trash, • Dusting, • Vacuum, • Mop Qualifications • Driver’s license with reliable transportation, • Pass a background check, • Excellent stamina and physical health, • Must be a hard-worker with high attention to detail and have a strong work ethic

Job Description Job Title: General Construction Laborer Location: North Scottsdale area Employment Type: Full-Time Pay Rate: $20–$26 per hour, depending on experience Job Summary: We are a residential custom home builder seeking a reliable and hardworking General Construction Laborer to join our team. The ideal candidate will assist with various construction tasks, including site clean up, maintenance, and some miscellaneous construction trades. This is a physically demanding role that requires a strong work ethic and a commitment to safety with inside/outside work on custom home new builds and remodels. Responsibilities: • Prepare and clean construction sites by removing debris and hazards, • Operate hand and power tools as needed, • Assist skilled tradespeople, • Follow safety protocols and company procedures, • Previous experience in construction preferred but not required, • Ability to lift heavy objects (50+ lbs) and perform physical labor for extended periods, • Basic knowledge of construction tools and equipment, • Strong attention to detail and safety, • Reliable transportation to job sites, • Ability to work in various weather conditions, • Competitive hourly wage ($20–$30/hour based on experience), • Paid time off, • Opportunities for advancement and training

Job Description Fast growing pool construction company looking for hourly and salaried positions with opportunity for growth and a career in pool construction long term. We are willing to train the right applicants. Positions can start immediately, and wage is $17 - $22/per hour based on experience and qualifications Benefits available after 90 days Paid Vacation after 12 months

Job Description Job Summary: The Construction Lift Spotter is responsible for ensuring the safe operation of aerial lifts, scissor lifts, boom lifts, and forklifts on construction sites. This role focuses on maintaining clear communication with lift operators, identifying potential hazards, and protecting workers, equipment, and surrounding structures. The Lift Spotter plays a critical role in job site safety and compliance with OSHA and company safety standards. Key Responsibilities: • Act as a dedicated spotter for aerial lifts, forklifts, and other material-handling equipment., • Monitor lift movement to prevent contact with personnel, structures, overhead utilities, and equipment., • Maintain clear line-of-sight with lift operators and provide hand signals or radio communication as needed., • Identify and communicate hazards such as uneven ground, overhead obstructions, power lines, and pedestrian traffic., • Establish and maintain exclusion zones and barricades around lift operations., • Assist operators with positioning, loading, and unloading materials when required., • Stop lift operations immediately if unsafe conditions are observed., • Ensure compliance with OSHA regulations, site-specific safety plans, and company policies., • Participate in daily safety briefings, toolbox talks, and job hazard analyses (JHAs)., • Document safety concerns or near-miss incidents and report them to supervision. Qualifications & Skills: • High school diploma or GED preferred., • OSHA 10 certification, • Previous construction or industrial job site experience required., • Knowledge of aerial lift and forklift safety practices., • Ability to understand and use standard hand signals for equipment operation., • Strong situational awareness and attention to detail., • Clear verbal communication skills., • Ability to work outdoors in varying weather conditions., • Physical ability to stand, walk, and remain alert for extended periods. Physical Requirements: • Ability to lift up to 50 lbs., • Ability to stand and walk for long periods., • Visual and auditory acuity sufficient to identify hazards and communicate warnings. Safety Commitment: The Lift Spotter is expected to promote a strong safety culture and actively support accident prevention on all job sites. Company DescriptionSOLID Personnel is a niche specific skilled trades recruiting & staffing firm founded in 2013. Our unique industry experience, and streamline staffing solutions separate us from the pack. SOLID is your one-stop shop for all professional recruiting & staffing needs in the following fields: Construction & Energy, Telecommunications, Low Voltage and Security. Our mission is to help people, businesses and communities thrive by providing the talent and opportunities that fuel their success and career advancement. Our vision is to strengthen the construction field and it’s communities through great opportunities that transform lives for future generations of builders and engineers. SOLID Personnel is an Equal Opportunity Employer.SOLID Personnel is a niche specific skilled trades recruiting & staffing firm founded in 2013. Our unique industry experience, and streamline staffing solutions separate us from the pack. SOLID is your one-stop shop for all professional recruiting & staffing needs in the following fields: Construction & Energy, Telecommunications, Low Voltage and Security. \r\n\r\nOur mission is to help people, businesses and communities thrive by providing the talent and opportunities that fuel their success and career advancement. \r\n\r\nOur vision is to strengthen the construction field and it’s communities through great opportunities that transform lives for future generations of builders and engineers.\r\n\r\nSOLID Personnel is an Equal Opportunity Employer.

Job Description We are a small, but busy, concrete construction company. We are looking for dedicated Construction Laborers to join our team. You will be responsible for loading and unloading frequently heavy materials and follow directions from supervisors and other skilled tradesmen. To do well in this role you should be physically fit, reliable, and be a hard worker with means of transportation. Construction Laborer Responsibilities: • Care for construction equipment and machines., • Help equipment operator, carpenters, and other skilled labor when necessary., • Prep construction sites by cleaning obstacles and hazards., • Load or unload construction materials., • Put together and take apart temporary structures, such as scaffolding., • Remove, fill, or compact earth., • Follow instructions from supervisors., • Assist craft workers., • Ready to learn from on-the-job training when necessary., • Perform site clean-up.

Job Description We are seeking a skilled and experienced Roofer/Repair Technician with expertise across multiple roofing systems. In this role, you will be responsible for inspecting, repairing, and maintaining roofs made from a variety of materials, including Shingle, Single Ply (TPO, EPDM, PVC), SPF, Acrylics, Silicone, Concrete/Clay Tile, and Modified Bitumen. You will play a key part in diagnosing issues and delivering high-quality repair solutions. Key Responsibilities: • Conduct detailed inspections across multiple roofing systems and materials., • Perform repairs on Shingle, Single Ply (TPO, EPDM, PVC), SPF, Acrylics, Silicone, Concrete/Clay Tile, and Modified Bitumen roofs., • Replace or install roofing materials in compliance with industry standards and safety protocols., • Collaborate with team members to complete residential and commercial repair projects., • Provide accurate repair estimates based on system-specific needs., • Document all work performed, including materials, repairs, and full replacements., • Stay updated on roofing trends, tools, and techniques while attending required safety and material trainings. Qualifications: • Proven experience as a Roofer/Repair Technician with multi-system expertise., • Strong knowledge of installation, maintenance, and repair practices across various roofing systems., • Proficiency with tools and equipment specific to each roofing material., • Excellent problem-solving abilities and attention to detail., • Strong communication and customer service skills., • Physical ability to work at heights and perform demanding tasks., • Valid driver’s license and reliable transportation. Benefits: • Health, dental, and vision insurance options., • Paid time off (PTO) and paid holidays., • Opportunities for professional development and career advancement., • Supportive, collaborative, team-oriented work culture If you're a dedicated professional with a passion for billing support and problem-solving, we'd love to hear from you! Apply now to become part of our team! Company DescriptionReady for a career in one of the fastest-growing industries of the 21st century? That opportunity is waiting for you here at Mission Restoration. We take pride in our positive environment, individual talent development, and team-based culture. We’re changing the industry, join us! Mission provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.Ready for a career in one of the fastest-growing industries of the 21st century? That opportunity is waiting for you here at Mission Restoration. We take pride in our positive environment, individual talent development, and team-based culture. \r\n\r\nWe’re changing the industry, join us!\r\n\r\nMission provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Hyperbaric Technician I Description: The Hyperbaric Technician I is responsible for the safe and effective operation of hyperbaric chambers and patient care during treatments. Serving as the primary technician in the absence of the Hyperbaric Department Supervisor, the Hyperbaric Technician I will ensure the smooth daily operations of the department, maintaining safety protocols and supporting the team. This position is ideal for a seasoned technician who can take on additional responsibilities when required, without assuming full supervisory duties. Duties/Responsibilities:  Patient Treatment: Administer hyperbaric oxygen therapy treatments according to physician orders, ensuring patient comfort and safety throughout the session.  Chamber Operation: Operate and monitor hyperbaric chambers, maintaining proper settings and addressing any technical issues that arise during treatment.  Patient Monitoring: Monitor patients during treatments for any signs of discomfort or adverse reactions, and promptly report concerns to the clinical team.  Safety Protocol Adherence: Ensure all safety standards and protocols are followed, including pre-treatment and post-treatment safety checks of chambers.  Documentation: Accurately record patient information, treatment data, and any observations related to the therapy session in accordance with facility standards.  Equipment Maintenance: Assist with routine cleaning, maintenance, and inspection of hyperbaric chambers and related equipment to ensure operational readiness.  Leadership Support: Act as the lead technician in the absence of the supervisor, providing guidance and oversight to Hyperbaric Technician II’s and support staff.  Team Collaboration: Work closely with physicians, nurses, and other healthcare providers to ensure seamless patient care and communicate any concerns or updates regarding treatments. Requirements:  Minimum 1500 documented hyperbaric treatment sessions  Preferred degree/certification in medical specialties, such as LPN/RN, EMT/Paramedic, or RRT  Certification as a Hyperbaric Technologist (CHT) or equivalent required, may be working towards a CHT  CPR/BLS Certification  Strong knowledge of hyperbaric oxygen therapy and safety protocols.  Ability to work in a fast-paced environment while maintaining a high level of attention to detail and patient safety. Company DescriptionBenessair is a premium, high end medical treatment facility specializing is cell health, longevity, and overall well-being.Benessair is a premium, high end medical treatment facility specializing is cell health, longevity, and overall well-being.

Job Description Roofers Needed We’re looking for experienced roofers with skills in shingle, tile, modified bitumen, and roof coating. * Willing to train the right candidate * Must have own tools and reliable transportation * Valid IDs required If you’re hardworking, dependable, and ready to join a great team, we’d love to hear from you! Company DescriptionWe have been in business in the Phoenix and surrounding areas for since 2016. Family owned and operated.We have been in business in the Phoenix and surrounding areas for since 2016. Family owned and operated.

Job DescriptionHello! we are currently hiring for Roofing Foreman here in Phoenix, AZ! Job Description We are seeking a dedicated foreman to join our foam and coating team. The ideal candidate will possess over four years of roofing experience and demonstrate a strong ability to lead and work alongside a team of 3-4 technicians. Responsibilities include installing and repairing foam roofs, performing general maintenance and repairs on buildings, and assisting with various tasks as needed. Responsibilities • Install and repair foam roofs in collaboration with a team of technicians., • Perform general maintenance and repairs on buildings., • Assist with spray foam, single-ply, built-up, or any other type of flat roof., • Follow strict safety protocols and comply with all safety regulations and site protocols., • Coordinate with the Superintendent and other team members as needed., • Maintain accurate job records for invoicing., • 4-5 years of roofing experience., • Proficiency in single-ply and spray foam/coatings roofing systems., • Experience using foam machines, mixing products, and applying coatings with paint rollers., • Ability to use power and hand tools effectively., • Strong adherence to safety protocols., • Experience in carpentry and installation., • Ability to work in all weather conditions and at heights., • Willingness to learn on the job., • Capability to lift heavy objects and materials. This is a Contract to Hire position based out of Phoenix, AZ. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Phoenix,AZ. Application Deadline This position is anticipated to close on Dec 23, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Pride Health is seeking an Onsite Medical Representative (EMT) to join a team in Tucson, AZ 85756. This position is ideal for a dynamic healthcare professional with a strong background in first aid, emergency medical response, and workplace wellness. Job Description: The Onsite Medical Representative (OMR) role requires a passionate healthcare professional to provide first aid support and safety coaching to associates. You will work closely with the WHS site manager, WHS specialist, and Injury Prevention Specialist, ensuring the health and safety of all associates while managing workplace injury prevention, case management, and emergency response. Key Responsibilities: • Provide first aid support for occupational and non-occupational injuries., • Minimize injury risk through education and proactive engagement with associates., • Maintain and document all medical records of care provided., • Oversee the workers' compensation program and manage return-to-work processes., • Submit daily activity logs and end-of-shift reports., • Engage with associates on the operations floor, providing coaching on safe work habits and at-risk behaviors., • Maintain a clean medical environment and ensure medical supplies are well-stocked., • Participate in First Aid, CPR, and AED training and maintain certifications., • Assist with drug testing protocols and emergency care delivery. Qualifications: Required: • High School Diploma or equivalent., • Current BLS (Basic Life Support) certification., • One of the following:, • EMT or Paramedic Certification from the Department of Health or NREMT., • Six months job experience in the Military as a Combat Medic, Field Medic, or similar., • Active Athletic Trainer Certification from BOC or state certification. Preferred: • Certified to teach First Aid, CPR, and AED through the American Heart Association or American Red Cross., • Proficiency in Microsoft Office., • Experience with industrial wellness programs, musculoskeletal disorders, and ergonomics., • Knowledge of OSHA regulations and Workers' Compensation procedures., • Skilled in digital record keeping. Additional Information: • Location: Tucson, AZ 85756, • Contract: 3 Months with possible extension, • Shift Schedule: M, T, Th, Fr (4 days) 12:00 PM – 10:30 PM, • Training Schedule: Same as regular shift, • Pay Rate: $30 - $37.41/hour (*Offered pay rate will be based on education, experience, and healthcare credentials.) Pride Global offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors. Interested? Apply now! About Pride Health Pride Health is Pride Global's healthcare staffing branch, providing recruitment solutions for healthcare professionals and the industry at large since 2010. Equal Employment Opportunity Statement As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Company DescriptionPride Global offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.Pride Global offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.

Job Description Overview As a Landscape Lead Technician, you’ll take the lead in maintaining and enhancing outdoor spaces. Your work will help keep lawns, gardens, and hardscapes looking their best. We’re looking for someone who’s dependable, takes pride in quality work, and is ready to be part of a strong team. Key Responsibilities: • Operate a company vehicle (AZ license required) to travel between job sites, • Perform lawn mowing, trimming, edging, and other maintenance tasks, • Adjust irrigation timers and repair sprinklers/drip lines, • Plant and maintain flower beds, shrubs, and trees, • Build and maintain hardscapes like patios, walkways, and retaining walls, • Use hand tools and landscaping equipment safely and effectively, • Conduct lawn care (fertilization, aeration, weed control), • Trim and prune trees and shrubs for health and appearance, • Assist with irrigation system installation, • Valid Arizona Driver’s License with a clean record, • Bilingual (Spanish/English) preferred, • Landscaping experience (preferred, but not required – we train the right person!), • Mechanical aptitude and ability to operate landscaping equipment, • Able to work outdoors in various weather conditions, • Strong attention to detail and pride in craftsmanship

Job Description About Us: Interior Logic Group is a leading manufacturer of high-quality cabinets serving residential and commercial markets. We pride ourselves on delivering exceptional products crafted with precision and attention to detail. As our company continues to grow, we are seeking a skilled Cabinet Assembler to join our team. Job Description: As a Cabinet Assembler, you will be responsible for constructing and assembling various types of cabinets according to specifications and blueprints. Your primary duties will include: • Reading and interpreting blueprints, drawings, and specifications to determine cabinet dimensions and materials required., • Selecting materials, such as wood, laminates, and hardware, and other hand and power tools., • Assembling cabinet components using adhesives, screws, nails, and other fasteners, ensuring precise alignment and fit., • Installing hardware, such as hinges, handles, and drawer slides, according to design specifications., • Inspecting finished cabinets for quality and accuracy, making adjustments and repairs as needed., • Maintaining a clean and organized work area, including proper storage of tools and materials., • Collaborating with team members and supervisors to meet production deadlines and quality standards., • Following safety protocols and procedures to prevent accidents and injuries. Requirements: • High school diploma or equivalent., • Proven experience as a cabinet assembler or similar role in woodworking or carpentry., • Proficiency in reading and interpreting blueprints and technical drawings., • Strong knowledge of woodworking techniques, tools, and materials., • Ability to use hand and power tools safely and effectively., • Attention to detail and precision in measuring, cutting, and assembling cabinet components., • Good communication skills and the ability to work well in a team environment., • Physical stamina and strength to lift and maneuver heavy materials and equipment., • Flexibility to adapt to changing priorities and production schedules., • Commitment to quality craftsmanship and customer satisfaction. Company DescriptionWe are the leading national installer for select high-value and stylistically important interior finishes, such as flooring, cabinets and countertops, to our homebuilder customers, as well as multi-family, commercial and repair & remodel customers.We are the leading national installer for select high-value and stylistically important interior finishes, such as flooring, cabinets and countertops, to our homebuilder customers, as well as multi-family, commercial and repair & remodel customers.

Job Description Cimaco Floor Service Inc. is seeking a Flooring Helper to assist our team. The Flooring helper will be assisting to install hardwood and vinyl flooring along with stained concrete and epoxy floors, using a variety of tools and techniques and over time will learn how to install all of our products. The individual in this position will also maintain a safe working environment. RESPONSIBILITIES • Follow direction laid out by Owner and Lead Installer, • Communicate Effectively with Lead Installer, Owner, & Office, • Cut, glue, and nail hardwood flooring using various hand tools and electric saws., • Clean, stain, seal concrete floors with various flooring equipment., • Assist with maintaining Clean Worksite Required to have: A working vehicle to travel to job locations. A working cell phone. Company DescriptionConcrete staining, refinishing, concrete overlay, and epoxy floors, along with expert installation of hardwood and luxury vinyl floors, along with repairing, sanding and refinishing of hardwood floors.Concrete staining, refinishing, concrete overlay, and epoxy floors, along with expert installation of hardwood and luxury vinyl floors, along with repairing, sanding and refinishing of hardwood floors.

Job Description Overview: We are looking for a hard-working, reliable, and punctual worker who is looking for a career. You will be expected to work with speed and accuracy and have a team-player mentality, while being committed to maintaining a safe and a positive work. Skills and Experience: • Able to utilize Power tools, Saw, Nail guns, Routers, drills and etc., • Able to read a tape measurer down to 1/16 of an inch, • Understand and read work orders for accuracy and product quality, • Able to conduct basic math including fractions, • Check all outgoing orders for accuracy, • Demonstrate commitment to all safety standards at all times, • Work cooperatively with team members and supervisors, • Use equipment properly and maintain it as needed, • Keep the work area clean and organized, • Report any order discrepancies or issues to management ASAP, • Solid work history that demonstrates reliability; warehouse work experience is a plus, • Able to work on your feet for 8 hour shifts and lift 45 lbs. on a regular basis, • Good communication skills, both written and verbal Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team

Job Description Pride Health is hiring for a EMT (Medical Representative) to support our client’s medical facility based in Phoenix, AZ. This is a 3-month opportunity and a great way to start working with a top-tier healthcare organization! Responsibilities: • Provide first aid support and make referrals to outside medical providers as necessary., • Minimize the AA risk of injury through awareness, education, and proactive engagement., • Maintain all records of care provided to AAs., • Coordinate and maintain the workers’ compensation and return to work programs for AAs with work-related injuries., • Provide daily activity logs and end of shift reports., • Engage with AAs and leadership on operations floor to provide coaching regarding observed at-risk work habits., • Maintain a clean working environment and ensure appropriate medical supply inventory is maintained., • Participate in training and certification to facilitate first aid, CPR and AED certifications classes., • Maintain all first aid, CPR, AED credentials., • Work flexible shifts which could include days, nights, holidays, and/or weekends., • Assist with random saliva drug testing protocols., • Maintain effective care delivery in emergencies and assist emergency response at the site. BASIC QUALIFICATIONS • High School diploma or equivalent, • Current valid Emergency Medical Technician (EMT) OR Paramedic Certification from the Department of Health OR the National Registry of Emergency Medical Technicians (NREMT); OR, • In the last year, six months job experience in the Military as a Combat Medic (U.S. Army), Field Medic (U.S. Army), Healthcare Specialist (U.S. Army), Hospital Corpsman (U.S. Navy), or Aerospace Medical Service Technician (U.S. Air Force); OR, • Current active Athletic Trainer Certification, by either the Board of Certification (BOC) or equivalent State Certification. PREFERRED QUALIFICATIONS: • Certified to teach first aid, CPR, and AED training from American Heart Association or American Red Cross, • Proficient in Microsoft Office, • Experience with an industrial wellness program, • Experience managing musculoskeletal disorders, ergonomics, and coaching on body mechanics, • Demonstrated work experience with OSHA regulations and Workers Compensation, • Proficient in digital recordkeeping Job Title: EMT (Medical Representative) Location: Phoenix, AZ Pay Range: $25/hr to $35/hr Training: Mon-Fri 8:00 am to 4:00 pm Shift: Weds-Sat 6:15 pm to 4:45 am Interested? Apply now! #INDPHCAlliedSpecialty About Pride Health Pride Health is Pride Global's healthcare staffing branch, providing recruitment solutions for healthcare professionals and the industry at large since 2010. As a minority-owned business that delivers exceptional service to its clients and candidates by capitalizing on diverse recruiting, account management, and staffing backgrounds, Pride Health's expert team provides tailored and swift sourcing solutions to help connect healthcare talent with their dream jobs. Our personalized approach within the industry shines through as we continue cultivating honest and open relationships with our network of healthcare professionals, creating an unparalleled environment of trust and loyalty. Equal Employment Opportunity Statement As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Company DescriptionPride Global offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.Pride Global offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.

Job Description General construction labor looking to learn the trades while getting paid. Must have transportation Company DescriptionWe are a small Manufacturer/Subcontractor located in Peoria, Arizona that has been Manufacturing and Installing Quality and Superior Indoor and Outdoor Athletic and Gymnasium Equipment for over 30 years.We are a small Manufacturer/Subcontractor located in Peoria, Arizona that has been Manufacturing and Installing Quality and Superior Indoor and Outdoor Athletic and Gymnasium Equipment for over 30 years.

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: • To verify property occupancy. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities • Most common type of inspection should only take 5-6 minutes., • Complete the inspection within 4 days after it is assigned., • Report general property conditions and make a determination of occupancy based on industry standards., • Take 9+ photos of the property with brief comments., • Complete a short form in an app., • Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory.Requirements (to be considered you must have the following):, • Computer with an internet connection, • Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas), • Smartphone (Android or iPhone), • Printer Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR SQ0P8SZQji

GetMed Staffing, Inc. is seeking a travel CVOR Technologist for a travel job in Prescott, Arizona. Job Description & Requirements • Specialty: CVOR Technologist, • Discipline: Allied Health Professional, • Start Date: 01/13/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Traveling with GetMed Staffing offers the unique opportunity to gain diverse experiences, both personally and professionally. Gain experience that matters. GetMed Staffing, Inc. Job ID #34640692. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Surgical Tech:CVOR,07:00:00-15:00:00 About GetMed Staffing, Inc. We are a diversity owned company, specializing in healthcare recruiting services. We truly understand how important a healthcare travelers' relationship is with their recruiter, as well as our relationship is with our healthcare facilities. We recognize that the needs of our healthcare travelers can vary, and therefore we provide the personalized touch necessary to ensure a successful travel assignment each and every time. Our healthcare facilities and clients benefit from us putting our healthcare travelers first. GetMed Staffing is excited to be a leader within the industry by focusing on providing healthcare travelers with more choices and possibilities as they plan for their next healthcare travel assignment. Benefits • Life insurance, • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan

Job DescriptionSalary: $45.55 Job Summary The UH-60 Aircraft Mechanic Avionics is responsible for the inspection, maintenance, troubleshooting, repair, and modification of avionics systems installed on the UH-60 Black Hawk helicopter. This position ensures aircraft avionics systems are fully mission-capable, safe, and compliant with applicable technical manuals, regulations, and operational requirements. Essential Duties and Responsibilities • Perform scheduled and unscheduled maintenance on UH-60 avionics systems, including communication, navigation, flight control, and mission equipment, • Troubleshoot and isolate avionics system malfunctions using technical manuals, schematics, test equipment, and diagnostic tools, • Remove, repair, replace, and reinstall avionics components such as radios, GPS, flight instruments, wiring harnesses, displays, sensors, and integrated avionics units, • Conduct operational and functional checks to verify system performance and airworthiness, • Perform aircraft inspections in accordance with maintenance schedules and technical directives, • Document maintenance actions accurately in aircraft logs, maintenance records, and electronic tracking systems, • Interpret and comply with applicable technical manuals, maintenance procedures, and safety regulations, • Assist with aircraft modifications, upgrades, and incorporation of avionics kits or mission equipment, • Support ground and flight operations as required, including preflight and postflight inspections, • Maintain avionics tools, test equipment, and work areas in a clean, safe, and serviceable condition, • High school diploma or equivalent, • Completion of military or civilian avionics maintenance training, • Experience maintaining UH-60 (Black Hawk) avionics systems or similar rotary-wing aircraft, • Ability to read and interpret wiring diagrams, schematics, and technical publications, • Proficiency with avionics test equipment and diagnostic tools, • Ability to work independently and as part of a team, • Strong attention to detail and problem-solving skills, • FAA Airframe and/or Powerplant (A&P) license, • Prior military aviation maintenance experience (15 series, 68 series, or equivalent), • Experience with integrated avionics systems, digital flight displays, and mission equipment, • Knowledge of Army or DoD maintenance documentation systems, • Ability to lift, push, and pull up to 50 pounds, • Ability to work in confined spaces and at heights, • Ability to stand, bend, kneel, and climb for extended periods, • Hangar, flight line, and field environments, • Employee & Family Health, Dental, and Vision Insurance Options, • $50,000/$100,000 Life/AD&D Insurance and 24/7 Teledoc Svcs, • Retirement Savings Plan (similar to a 401(k), • Employee Assistance Program (EAP), • Cash Equivalent Benefits, • Paid Federal Holidays, • Paid Sick Leave, • Paid Vacation LOGMET is an Affirmative Action and Equal Opportunity Employer:we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply!If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMETs Human Resources Department Manager directly: , 1.888.765.1154, Ext.4 We sincerely appreciate your consideration; please feel free to contact LOGMET's HR Department anytime, with any questions you may have.

Job DescriptionAbout C.R. England, Inc.Founded in 1920, C.R. England, Inc. is headquartered in Salt Lake City, UT and is one of North America’s premier transportation companies. C.R. England is an industry leader in Dedicated, Over-The-Road, cross-border Mexico, and Intermodal services.C.R. England has also been regularly recognized for management excellence. This year, C.R. England was recognized by Newsweek as one of ‘America’s Greatest Workplaces for Women’, one of only three truckload carriers to receive this recognition, and ‘America’s Greatest Workplaces for Diversity’ one of only seven truckload carriers to be so recognized. Additionally, C.R. England was honored with a ‘2020 Glassdoor Top Places to Work’ award, the ‘Achievers 50 Most Engaged Workplaces™ Award’ and by Deloitte Private and The Wall Street Journal as a ‘2021 US Best Managed Company’.Committed to giving back the community, learn more about C.R. England Inc.’s goal of providing one million meals to children annually through partnerships with local food banks by visiting . Position: Fleet Mechanic Location: Casa Grande, AZ Pay: $23.00/hr - $30.00/hr ATTENTION EXPERIENCED DIESEL MECHANICS: If you want to build a stable career with an industry leader that provides: • $5,000 experience bonus, • A safe, clean, and organized shop,, • Free uniform and laundry service, including jackets,, • Reimbursement for boots and safety glasses (including prescriptions safety glasses),, • Annual safety bonuses, and, • Generous employee referral bonuses... C.R. England has an amazing career opportunity for you! We are growing and offering qualified and experienced new hires a $5,000 signing bonus paid during the first year of employment. (Some restrictions may apply. Signing bonus may not be available to all candidates. Manager or recruiter can provide additional details.) Why work for C.R. England?, • Great Compensation & Benefits!, • Weekly pay, vacation, a floating holiday, medical, dental, life, vision, 401K, and more, • Free uniform and laundry service, including jackets, • Reimbursement for boots and safety glasses (including prescriptions safety glasses), • Annual safety bonuses, • Generous employee referral bonuses., • Great Facilities!, • Tractor lifts., • T-8 lighting throughout all bays and isles., • Locker rooms w/ showers., • Break rooms., • Bulk fluid delivery systems available to all repair bays., • Clean DPF’s with FSX Machines (we clean our own)., • Open parts rooms., • Great Equipment! Our tractor fleet of 4,000+ Daimlers consisting of: • Cascadia tractors with DD15’s and DT-12 automated transmissions., • Western Stars with DD15’s and DT-12 automated transmissions., • Our fleet of 8,800 trailers consisting of:, • Utility and Wabash trailers., • Thermo King and Carrier refrigerated units., • TempStack intermodal containers., • Dry Van Trailers with Dura-Plate., • Our generous tool supply, laptops, and diagnostic software., • Great Career Path! - Personal and professional development through C.R. England University., • Safety training., • Self-paced on-line training., • Leader led training., • Hands-on training., • Career Path Planning and Individual Development Plans. Job qualifications may include, but not limited to: • General knowledge of EGR/emissions control systems, foundation, air, and ABS brake systems, and DC electrical systems., • Understand the importance of diagnosis and repair versus parts replacement. - Basic computer knowledge with good written communication skills., • Ability to read and understand repair manuals and complete/fill tags and repair orders., • Experience with Freightliners or Detroit engines a plus. - Excellent customer service skills., • Be 18 years of age or older., • High School Diploma or GED., • Graduation from trade or technical school., • Substantial diesel technician experience or heavy duty military mechanic experience with tanks, LAVs, or 5-ton vehicles can take the place of trade school., • Must provide your own roll-a-round storage and hand-tools. Job requirements may include, but not limited to: • Troubleshoot, diagnose, and perform preventative maintenance and repairs on tractor systems including diesel engines, transmissions, brakes, HVAC, satellite/cellular systems, electrical, suspension, and tires., • Utilize computer systems (TMT, TMW, and internet) to accurately create, track, and complete work order repairs including the tracking of time (labor hours), parts used, work completed, and locate technical information as required., • Move equipment on and off the safety lane and around the yard., • Perform proper safety protocols and procedures, including use of protective equipment, and maintain a safe work area in accordance with company policy., • Provide superior customer service to drivers., • Maintain a positive work atmosphere by acting and communicating in a positive, collaborative, efficient, service-oriented manner., • Perform additional duties as assigned by leadership., • Other duties as assigned. C.R. England 2025 C.R. England is an equal opportunity at will employer and does not discriminate against any employee or applicant for employment because of age, race, religion, color, disability, sex, sexual orientation or national origin.

Job DescriptionSalary: TBD Location: U.S. Army Yuma Proving Ground, Arizona • Maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and shears. This job requires working knowledge of technical publications and shall be required to make entries in aircraft logs and records. The incumbent receives technical guidance, as required, from supervisor or higher-level technician. Military experience a plus. Minimum Experience Requirements: • 3-5 years turbine powered UH-60 Blackhawk experience, • Must have training on UH-60 PMI phase inspections, • Must be able to follow engine and component overhaul manuals, • Prefer two years of experience performing maintenance checks/multi-engine, • FAA Airframe & Powerplant License Preferred, • UH-60 Crew Chief Flight background Preferred, • Recent CAN experience is a plus, • Must be able to work indoors and outdoors., • Able to lift and carry at least 50 lbs, • FAA Airframe and Powerplant License Preferred., • Class D Driver License, • Must pass physical and Drug test, • MUST be able to obtain a Secret Clearance, • Must have own tools/toolbox Duty Hours M-TH or Tu-FRI 6:30-5:00 PM [ Off Monday or Friday] Benefits Available • Employee & Family Health, Dental, and Vision Insurance Options, • $50,000/$100,000 Life/AD&D Insurance and 24/7 Teledoc Svcs, • Retirement Savings Plan (similar to a 401(k), • Employee Assistance Program (EAP), • Cash Equivalent Benefits, • Paid Federal Holidays, • Paid Sick Leave, • Paid Vacation LOGMET is an Affirmative Action and Equal Opportunity Employer:we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply!If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMETs Human Resources Department Manager directly: , 1.888.765.1154, Ext.4 We sincerely appreciate your consideration; please feel free to contact LOGMET's HR Department anytime, with any questions you may have.

Job DescriptionJob Title: Fiber Splicing Technician – Ribbon Splicing Location: (Travel Required) Position Overview: We are seeking experienced and detail-oriented Fiber Splicing Technicians with proven ribbon splicing experience to join our growing team. This position plays a critical role in supporting large-scale data center and fiber infrastructure projects across multiple states. We are looking for technicians who take pride in delivering precise, high-quality splicing work and are ready to travel as needed for ongoing nationwide projects. All travel expenses, housing, and per diem will be provided. Key Responsibilities: * Perform fusion splicing and ribbon splicing for high-count fiber optic cables (including up to 3456-count). * Operate fusion splicing equipment and related fiber optic tools efficiently and safely. * Conduct fiber testing, troubleshooting, and validation using OTDR, power meters, and inspection scopes. * Maintain accurate documentation and labeling, ensuring all splices meet project specifications and quality standards. * Follow all safety protocols, OSHA regulations, and company procedures on every site. * Collaborate closely with team members and project leads to ensure on-time and high-quality delivery. Qualifications: * Proven hands-on experience in ribbon splicing (required). * Strong understanding of fusion splicing techniques, fiber optic testing, and quality control processes. * Ability to read and interpret fiber maps, splicing diagrams, and work orders. * Excellent attention to detail and a strong commitment to precision and reliability. * Must be dependable, punctual, and able to work in outdoor or data center environments. Preferred Experience: * Multiple years of experience splicing high-count ribbon fiber cables (1728, 3456, etc.). * Experience working on data centers, backbone fiber builds, or large-scale telecom infrastructure. * Familiarity with documentation standards and QA/QC workflows. * Comfortable working on travel-based projects with fast-paced schedules. Compensation & Benefits: * Competitive pay based on experience and performance. * Project-based work with opportunity for continuous assignments. * Housing and per diem provided for all travel projects. * All travel expenses covered. Important Requirement: All candidates must pass a technical assessment on ribbon splicing before placement. Only candidates with verified, hands-on experience will be considered. How to Apply: If you have proven ribbon splicing experience and are ready to travel, we’d love to hear from you! Powered by JazzHR P9Z4Q5Wgu9

Job Description Xenith Solutions is a small family-focused business where we focus on taking care of our employees and customers equally. We are focused on serving Federal / Civilian, Defense and Intelligence organizations with superior service. If you want to be a part of a rapidly growing business with an exceptional culture, then you want to be a part of the Xenith Solutions family. Xenith offers unmatched Benefits: • 100% of Medical, Dental, and Vision benefits paid by employer, • FSA or HSA available, • Unlimited Paid Time Off (PTO), • 401(k) matching (100% up to the first 4%) with NO vesting period, • Tuition / Certification / Training reimbursement, • Accident / Disability / Universal Life Insurance Responsibilities: • Maintain surveillance, on a day-to-day basis, over the full range of field engineering activities associated with specific phases of a major military construction project., • Provide expertise and guidance concerning safety and quality assurance. Ensure adherence to safety regulations in day-to-day construction activities., • Review the contractor’s proposed schedules for logic, adequacy, and practicability that milestones will be met., • Review contractor's payment estimates submittals, progress measurement data, and reports of materials and equipment used., • Prepare daily activities report, which includes instruction to contractor representative, quantities of pay items placed, weather conditions, progress of construction, reasons for delay, and any unusual problems encountered., • Provide expertise and guidance concerning safety and quality assurance to all sections and personnel under the purview of the project., • Ensure compliance with the environmental Best Management Practices per the contract., • Support project related outreach efforts as required., • Support construction oversight manager and Government COR/Project Manager as directed in support of construction execution., • Analyze problems and review and interpret the requirement of plans and specifications., • 3 to 10 years of experience and a bachelor’s degree., • Education substitutions:, • 6 years' work experience may be substituted for a bachelor's degree,, • associate's degree plus 4 years' work experience may be substituted for a bachelor's degree., • 3 years of construction oversight experience including surveillance, monitoring, and controlling construction of all types (horizontal construction preferred), to ensure compliance with contract documents and to ensure use of proper construction materials and techniques. Experience should also include reviewing construction technical data for progress reports, preparing data for processing pay estimates for construction projects, and enforcing construction industry and safety standards on construction projects., • One or more of the following certifications are highly preferred:, • OSHA 30 Construction, • Mobile Elevated Work Platform (MEWP), • Construction Quality Management (CQM), • EM 385-1-1, • Proficiency in Microsoft Word, Excel, Outlook, PowerPoint, and SharePoint., • Proficiency with project management software (Procore, Autodesk, etc.)., • Ability to communicate clearly with a variety of stakeholders., • Ability to effectively solve problems., • Strong communication skills, both oral and written., • A true team player who maintains a positive attitude in a dynamic environment., • Experience in managing multiple projects with independent schedules and budgets simultaneously., • Ability to travel between job sites, if requested. Disclaimer: The salary range displayed represents the typical salary range for this position and is not a guarantee of compensation. Individual salaries are determined by various factors including, but not limited to location, internal equity, business considerations, client contract requirements, and candidate qualifications, such as education, experience, skills, and security clearances. Salary Range: $90,000.00 To $110,000.00 Annually Xenith Solutions LLC is a Service-Disabled Veteran-Owned Small Business founded in 2019. We provide comprehensive, timely and relevant Solutions and Business Consulting support to our customers as a key partner. Our leadership brings over a century of combined experience in Defense and Civilian markets. Our employees possess experience in all aspects of solution development from requirements creation, development, test and evaluation, fielding, and sustainment. At the core of our offerings, we provide strategy and technology solutions, giving our customers valuable insights and thought leadership on the best application of information technology to drive business objectives. Xenith focuses on solving complex business challenges facing our customers. Our “Success Through Achievement” work ethic means our customer receive quality solutions through our commitment. We pride ourselves on tackling some of the most difficult operational requirements our customers have – ensuring an appropriate match between the mission requirements, financials, schedule, and security. EEO Xenith Solutions provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. EEO IS THE LAW If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Xenith Solutions. E-Verify As a Federal Contractor, Xenith Solutions is required to participate in the E-Verify Program to confirm eligibility to work in the United States. Affirmative Action Plan As a federal government contractor and based on Executive Orders and applicable laws and regulations, Xenith Solutions develops and maintains annual written Affirmative Action Plans and endeavors to hire and advance qualified minorities, females, individuals with disabilities, and protected veterans. Powered by JazzHR 9M253JkOWl

Olaro is seeking a travel CVOR Technologist for a travel job in Prescott, Arizona. Job Description & Requirements • Specialty: CVOR Technologist, • Discipline: Allied Health Professional, • Start Date: 01/13/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Olaro is a trusted partner in healthcare staffing, connecting nurses and allied health professionals with opportunities nationwide. For over 35 years, we’ve helped clinicians expand their horizons by matching them with assignments that fit their lifestyle, career goals, and personal ambitions. At Olaro, we value your expertise and support your growth at every step. We offer competitive pay, comprehensive benefits, and access to diverse clinical experiences that build your skills and open doors to new possibilities. With 24/7 support, streamlined onboarding, and a team committed to your success, you’ll always have a proven guide by your side. Whether you want to explore new locations, broaden your clinical experience, or achieve better work–life balance, Olaro provides the flexibility and support to help you thrive. Join us, and let’s shape the future of healthcare together.

Anders Group is seeking a travel CVOR Technologist for a travel job in Prescott, Arizona. Job Description & Requirements • Specialty: CVOR Technologist, • Discipline: Allied Health Professional, • Start Date: 01/13/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Health Insurance, Including a Buy-up Option Dental Insurance Vision Insurance\n, • Life Insurance\n, • 401(k)\n, • Licensure Reimbursement\n, • Premium Pay Packages\n, • CEU Reimbursements\n, • Daily Per Diems\n, • Travel Reimbursements\n, • Rental Car Allowances\n, • Continuing Education Resources\n, • Referral Bonus\n, • Medical benefits, • Dental benefits, • Vision benefits, • Life insurance, • 401k retirement plan, • License and certification reimbursement, • Continuing Education, • Referral bonus

Jackson Nurse Professionals is seeking a travel CVOR Technologist for a travel job in Prescott, Arizona. Job Description & Requirements • Specialty: CVOR Technologist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel We're hiring a skilled Registered Nurse that's experienced at caring for patients who are recovering from Cardiac Surgery, including heart and lung transplantation, for a 13 week contract at a state-of-the-art area hospital. At Jackson you'll experience an incredibly supportive and ambitious team that's been committed to the careers of traveling nurses since 2006. JNP nurses benefit from our exclusive Referral Program as well as same day pay access through ImmediatePay! Through our Referral Program our nurses have the opportunity to earn a substantial extra income, with our give $200 get $500 offering for each referral. Access your referral's status, referral earnings, and optional same day pay all in our JNP Pulse app!! Minimum Requirements: • Current state license in good standing with State License Board, • 12 months CVOR experience in an acute-care setting within the last 3 years., • At minimum, current BLS required (certifications vary by location - job may require ACLS). We deeply value your commitment to improving the lives of patients, that's why we offer a comprehensive and competitive benefits package starting your first day. • Full Medical Benefits & 401k Matching Plan, • 24/7 Recruiter: Your main point of contact available by text, phone, or email, • Referral bonuses: Give $200, Get $500 for every referral, • 100% Paid Housing Available, • Travel & License Reimbursement EEO Statement Jackson Healthcare and its family of companies are an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender, gender identity and expression, national origin, age, disability or protected veteran status. We celebrate diversity and are committed to creating an inclusive environment for all of our associates. Jackson Nurse Professionals Job ID #1591605. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Jackson Nurse Professionals Filling critical needs in patient care, Jackson Nurse Professionals delivers cost-effective travel nurse staffing solutions to over 500 hospitals, outpatient clinics, and home health clients nationwide. Awarded Best of Staffing - Talent and Client 2024, and rated as a Top Workplace 2023 by the Orlando Sentinel, Jackson Nurse Professionals goes the extra mile to provide travel nurses the career they deserve, while providing clients with a large range of highly skilled nurses to fill short, long-term, and temporary assignments. As a member of Jackson Healthcare’s family of award-winning staffing companies, we’re part of a growing community that’s impacting 10 million patients nationwide. Join our mission to improve the delivery of patient care, and the lives of everyone we touch.

Job Description OPHTHALMIC TECHNICIAN AND SCRIBE POSITIONS OPEN IN GROWING OPHTHALMOLOGY PRACTICE We are adding new providers and are looking for OPHTHALMIC TECHS AND SCRIBES to work in our Tucson and/or Green Valley offices. Medical experience preferred but we are willing to train. MA’s welcome to apply. We are a well-established practice with 5 providers and 3 locations on Speedway/Wilmot, Houghton/ Drexel and Green Valley. This is an excellent opportunity for a long-term career in ophthalmology with potential for education and growth. SCRIBE recommendations and duties: • Ophthalmology or medical experience, • Demonstrate reliability through work history, • Exceptional patient relation skills, • High school diploma or GED certificate a must, • Dependable transportation as some travel is required, • Able to pass full background checks, • Spanish speaking helpful but not required, • We are an E-Verify Employer, • All duties listed under Scribe plus the following., • Minimum 1 year ophthalmology experience, • Taking patient history and vision, • Refractometry and tonometry, • Visual fields and OCT, • Contact lenses, • IOL Master and biometry All employees are eligible for the following benefits: • Health, Dental and Life Insurance, • Short Term Disability, • 401K and Pension/Profit Sharing Plan, • Generous PTO, • Paid Holidays, • Optical Benefit: routine exam and glasses or contacts annually, • Training, • Continuing Education and Technical Certification is covered, • EMR and ERXCompany DescriptionEstablished in 1989, Desert Eye is a very successful ophthalmology/optometry practice. We offer competitive salaries and excellent benefits that include a generous PTO policy, paid holidays, health insurance, training, 401k and retirement plan.Established in 1989, Desert Eye is a very successful ophthalmology/optometry practice. We offer competitive salaries and excellent benefits that include a generous PTO policy, paid holidays, health insurance, training, 401k and retirement plan.