Customer support engineer jobs in Brentwood, New YorkCreate job alerts

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description Embedded Design Engineer For over sixty years, the Orbit Electronics Group has designed and manufactured customized electronic subsystems and major components for military aircraft, shipboard, handheld, and ground-based programs, as well as designing hardware to support rugged non-military applications. Advanced in-house technologies, proven design expertise and diligent analysis of the relationships between human and machine enable the Orbit Electronics Group to deliver products that increase user productivity, reliability, and overall performance in mission-critical applications. Our products include Keyboards, Trackballs, Control Display Units, Flat Panel Displays, Integrated Switch Panels, Enhanced & Ruggedized LCDs, and more. Our goal is to ensure Total Customer Satisfaction by providing our customers with the best available equipment and service so they will recognize Orbit as the source for their Human Machine Interface (HMI) needs. Job Description This position primarily involves software/firmware and hardware design as part of the Orbit Electronics Group engineering team. The right candidate should be able to bring an embedded design from concept to completion. • Software/firmware and hardware design and implementation of embedded systems to use in Keyboards, Trackballs, Control Display Units, Flat Panel Displays, Integrated Switch Panels, Enhanced & Ruggedized LCDs, and more., • Use computer-assisted engineering and design software and equipment to perform assignments, applying principles and techniques of electrical engineering to accomplish goals., • Design of test software and test suite packages including selection of accompanying commercially available test equipment and design of non-standard test equipment., • Participation in preparation of specifications and documentation related to new and legacy designs., • Assist in troubleshooting of new and legacy embedded designs, which include a broad mix of communication protocols. Work with other members of the multi-disciplinary engineering team to bring designs to realization. Requirements US citizenship or permanent residency required Minimum of 2-years’ experience in an embedded systems or software design role Bachelor’s degree in Computer Engineering, Electrical Engineering, or a related field Experience in embedded software development, including firmware design and low-level programming Experience with Schematic Capture and PCB design tools is preferred Experience designing mixed-signal circuits (combining analog and digital components) is preferred Experience writing code in C or C++ is a plus Experience with Real Time Operating Systems is a plus Organized and detail oriented Good interpersonal skills, along with verbal and written communication skills Ability to work in both a team environment and independently Benefits *401K *Health Insurance *Vision and Dental Insurance *Paid Time off (Vacation, Holidays, sick leave etc.) *Flexible Spending Accounts *Tuition Assistance *End of year time off *Opportunities for advancement Salary $70,000 - $80,000 Depending on experience. Schedule Monday – Friday 8:00am – 5:00pm (onsite) Company DescriptionLong Island, NY company founded over fifty years ago as an engineering, manufacturing and consulting firm for power products. Over the past fifty plus years, our company has grown to become a world class provider of the highest quality Standard, Modified Standard, Custom and COTS AC Power Sources, Frequency Converters, Inverters, DC-DC, AC-DC, DC-AC, and Uninterruptible Power Sources (UPS) for commercial, industrial and military mission-critical applications. We have a proven ability to solve any power requirement, and we support our products with personal service that exceeds even your highest expectations.Long Island, NY company founded over fifty years ago as an engineering, manufacturing and consulting firm for power products. Over the past fifty plus years, our company has grown to become a world class provider of the highest quality Standard, Modified Standard, Custom and COTS AC Power Sources, Frequency Converters, Inverters, DC-DC, AC-DC, DC-AC, and Uninterruptible Power Sources (UPS) for commercial, industrial and military mission-critical applications. We have a proven ability to solve any power requirement, and we support our products with personal service that exceeds even your highest expectations.

Job Description Position Title: Senior Test Engineer REV000 Department: Test Engineering Reports to: Director, Test Engineering Job Code: 3i1 FLSA: Salaried (Exempt) EEO Category: 2 - Professionals For more than 60 years, Power Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Test Engineer will be responsible for overseeing and leading all aspects of test engineering for high-reliability electronics products within the organization. This role combines advanced technical expertise, leadership, and problem-solving abilities to manage and execute complex testing tasks, develop test systems, and mentor a team of engineers. The individual will play a key role in ensuring product quality, improving test processes, and driving innovation in testing methods and equipment. Key Position Accountabilities: • Lead and manage the design, development, and implementation of test systems, test fixtures, and test software., • Provide technical leadership in the troubleshooting, analysis, and resolution of complex test-related issues., • Oversee the testing of prototype, production, and customer-returned products, ensuring all tests are performed to meet quality and performance standards., • Collaborate with cross-functional teams (Engineering, Design, Manufacturing) to develop and optimize testing processes that align with production requirements., • Mentor and provide guidance to junior test engineers, fostering an environment of continuous learning, collaboration, and high performance., • Lead failure analysis and root cause investigation for both in-house and customer-returned products, ensuring corrective actions are implemented and communicated to relevant teams., • Champion the continuous improvement of testing methodologies, test equipment, and process optimization., • Provide technical support in test equipment selection and integration, ensuring the team has the proper tools to execute testing procedures effectively., • Review and approve test documentation, including test plans, test reports, and procedures, ensuring compliance with company and customer requirements., • Ensure adherence to industry standards (e.g., MIL-PRF, IPC) in all test activities., • Support the execution of qualification and certification testing as needed to meet customer requirements., • Education: Education: Bachelor's degree in Electrical Engineering or a related field. Graduate degree is a plus., • Experience: 10+ years of experience in test engineering, with at least 3 years in a leadership or senior engineering role overseeing test activities in a manufacturing environment., • Technical Skills:, • Expertise in designing, developing, and optimizing test systems, test fixtures, and software., • Extensive knowledge of testing techniques, test equipment, failure analysis, and debugging., • Proficient in the use of statistical analysis techniques (SPC) and test data analysis., • Knowledge of electronics manufacturing, including Hybrid and PCB manufacturing., • Familiarity with MIL STDs 883, MIL-PRF 38534, 38510, IPC 610., • Leadership Skills: Proven ability to lead, mentor, and develop teams of engineers, ensuring a high level of performance and collaboration., • Strong problem-solving skills with the ability to diagnose complex issues and drive solutions., • Excellent written and verbal communication skills, with the ability to present technical information to various stakeholders., • Experience with test automation, scripting languages (e.g., Python, LabVIEW)., • Familiarity with modern test equipment and emerging testing technologies., • Ability to influence change and drive improvements in testing processes and practices. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Are you ready to join an award-winning MSP recognized as one of the Best Places to Work? Techworks Consulting is seeking a talented and driven MSP Senior Engineer to support unique, complex customer environments while collaborating closely with a tight-knit, supportive team. If you're passionate about IT and thrive in a dynamic, hands-on setting, this on-site role in Ronkonkoma, NY could be the perfect opportunity for you! We'll Provide: * Robust benefits package including health insurance, dental, 401K, PTO and holidays * Salary range of $85,000-$120,000 * Opportunities for continued growth and learning * Great company culture supported by strong core values What You'll Do: * Serve as a field resource for onsite projects, troubleshooting, and deploying new equipment * Consult with clients on hardware/software rollouts and provide training on deployed systems * Manage and support Windows Server, Virtualization, Cloud Platforms, Active Directory, and Group Policy * Plan and execute projects with effective time management and organizational skills * Perform local and cloud server migrations, including Microsoft Office 365 migrations * Assist Security Engineers with compliance, risk assessments, and business continuity planning * Troubleshoot networks (routers, firewalls, switches, cabling) and conduct wireless network assessments, design, and heat mapping * Collaborate with the Technical Account Management team on Sales Engineering requests Skills You'll Need: * Minimum 3 years of experience in Managed Services and/or IT Consulting * Certifications from Microsoft, CompTIA, or Cisco or the ability to obtain in 90 days * Proficiency with RMM tools, backup solutions, and ticketing systems * Strong Windows Server/Workstation installation, configuration, and troubleshooting skills, along with UTM/router/switching/wireless experience * Excellent customer service skills * Strong communication, troubleshooting, problem-solving, and organizational skills, including accurate time entry and documentation Next Steps: * Quick apply with your resume here OR * Get a head start on our application and aptitude testing process here:

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office with occasional travel to manufacturing location in Mexico The pay range for this position is between $120,000 and $150,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Design Engineer is responsible for developing new magnetics related components based on customer or marketing inputs. They shall have working knowledge of transformer design, property of materials, electrical testing, and design for manufacturability. Performance will be measured on creating designs that meet or exceed customer requirements, timely transition of new designs from concept to production readiness, collaboration with production in suggesting and implementing productivity projects. Key Position Accountabilities: · Design and Development: Plan, conceptualize, and develop new magnetics components using new and innovative technology. Design analog circuits related to high frequency data bus and video signal transmission. Provide material and labor estimates to Sales for customer requests for pricing. • Equipment and Materials Research: Actively seek out opportunities improve existing processes by keeping up with new equipment and material releases. Seek out ways to integrate new equipment and materials to improve productivity., • Collaboration: Work closely with engineers, managers, and other design professionals in the development of prototypes, sustaining efforts, and integration of systems into manufacturing processes. Support the transition of designs from concept to prototype and to full-scale production., • Mentoring and Design Review: Coach junior engineers in solving design issues. Responsible for project management of Design Reviews., • Testing and Validation: Create, review, and verify test setups. Support the execution of testing procedures required for product acceptance and qualification. Collaborate with internal and external facilities to validate design performance against defined specifications., • Engineering Analysis: Perform calculations to support CapEx return on investment decisions., • Material Selection and Development: Choosing the right material for a specific application, considering factors like strength, durability, cost and environmental impact., • Documentation and Compliance: Create, review, and maintain technical drawings, specifications, and product documentation using a mix of CAD (SolidWorks preferred), MS Word, and digital images. Ensure designs and processes meet industry and regulatory standards, including internal engineering standards and product definition procedures., • Continuous Improvement: Apply problem-solving skills to identify areas of improvement in existing designs or manufacturing processes, making recommendations and providing solutions to enhance efficiency, quality, and cost-effectiveness., • Mathematical and Analytical Skills: Strong ability to apply engineering fundamentals, and statistical methods to create innovative, reliable, cost effective design solutions that translate into more design wins., • Design Skills: Strong knowledge of electromagnetic theory, magnetic circuit design, and magnetic material properties., • Analog Circuit Design: Working understanding of analog and digital electronics, signal integrity, power and thermal management is a plus. Simulation experience with LTspice or similar is a plus., • Problem Solving and Innovation: Excellent troubleshooting and critical thinking skills with the ability to propose innovative and creative solutions to complex design challenges., • Communication Skills: Strong verbal and written communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders for internal and external customers. Excellent interpersonal skills to work collaboratively across teams. Bilingual in English and Spanish is beneficial., • Adaptability: Ability to work on several projects at once and shift priorities as needed to meet company goals, • Attention to detail: High attention to detail with the ability to conduct rigorous reviews of designs, calculations, and test procedures to ensure compliance with specifications and quality standards., • Bachelor of Science degree in Engineering discipline required., • Bachelor’s or Master’s Degree in Electrical Engineering preferred, • 7+ years of related experience., • Working Knowledge of Military Specifications., • Experience in Military/Aerospace industry a plus. Work Environment: • This position operates in a mix of office, manufacturing, and lab-based environment., • Some travel may be required for process review at other manufacturing plants or supplier locations. Physical Demands: • Must be able to remain stationary during design and analysis sessions., • Having good manual dexterity and basic soldering / assembly skills to assist in building test and assembly fixtures is a plus., • Ability to lift and move up to 25 pounds of testing or prototyping equipment., • Frequent communication with cross-functional teams; ability to convey complex technical details clearly and effectively. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Field Construction Coordinator to join our team at K&A Engineering in Ithaca, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Field Support to Resolve Problems – Being Proactive, • Must do Reporting – Weekly Report, Monthly Reports, tracking of weekly PayId’s completed., • Monitor Schedule - Look Ahead vs. PM, • Attend the contractor’s Safety, Environment and Quality meetings; provide a tip in the onsite meeting., • Maintain and update as needed the onsite H&S, Environment and Quality project binder., • Be organized, and document all project progress to provide a good paper trail, • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting. Request the contractor two week look ahead schedule at each weekly meeting., • Present onsite when work is being performed (make frequent observation of contractor’s activities)., • Immediate notification to PM of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate Material delivery between Customer Stockroom, and Contractor., • Inspect all project related construction material for damage and completeness for the project execution., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Facilitate resolving construction problems, discrepancies, procedures, and methods by working with engineering personnel, inspectors, contractors and suppliers. Must have strong communications skills., • Minimize Change Orders. Support Project Manager to review any requested Change, • Orders/Notices or other claims submitted by Construction Contractors which relate to additional payments, schedule adjustments or other modifications to the Project, and make such recommendations to the PM regarding the legitimacy of such claims and review the, • Construction Contractor’s proposed mitigation., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Maintain a daily on-site as-build project plans., • Continuously communicate (written and verbally) with the associated PM., • Adhere to company policies, programs and procedures as well as Critical Infrastructure, • Protection (CIP). Ensure all requirements are maintained throughout the project execution, • Promote a proactive safety culture by encouraging open communication, reporting unsafe conditions, and suggesting improvements to safety practices., • Minimum of five (5) years’ experience in progressive related electric utility industry experience, with transmission facilities construction management, • Two (2) years of college is preferred, • Construction Project Engineer Background Preferred, • Distribution line work experience required, • MS Suite Required – with high competency in MS Excel, • Knowledge of NRA clearances and switching orders would be beneficial, • Applicants should have the knowledge, experience and skills needed to review project plans, specifications, contract enforcement, and applicable technical standards, OSHA and other regulatory statutes., • Detailed work experience in electrical Utility transmission UV/OV & civil construction, • Must have current US Work authorization and valid US Driver License in good standing, • Minimum of 5 years of supervisory capacity experience, • Knowledge of GPS Systems & knowledge of SAP are preferred, • Ability to read and interpret specifications and drawings and convey interpretations to contractors, • Ability to investigate and solve construction problems in a timely manner with minimum dependence on others, • Computer and Administrative skills, • Strong verbal, written and interpersonal communication skills, • Must be able and willing to attend training in E-STAR/CONVEX (switching and tagging). Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job DescriptionSalary: $70-95K DOE Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uPs and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location New York (Long Island)

Job Description Electrical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This electrical engineering career opportunity is responsible for assisting in the design, wiring, testing and debugging complex, electro-mechanical, industrial x-ray integrated sources. Job Description: • Responsible for creating and maintaining Electrical Engineering Change Notices, • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies used with x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise and finalize BOMs, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software) to generate and edit system electrical design documents, • Provide support to other departments in the creation of technical documentation, system manuals and customer facing documentation, • Create and maintain engineering reports, • Interact with other engineering disciplines, the sales and production teams on system designs and to help resolve customer problems and provide world class customer service, • Perform other duties as assigned by engineering team, • Bachelor’s degree or higher in Electrical Engineering, • Internship or work experience in a manufacturing or engineering company, • Understanding of electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Prior soldering experience, • Proficiency in the English language with established written and verbal communication skills, • Excellent Microsoft Office Skills, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Must be authorized to work in the U.S., • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • X-ray component knowledge, • Basic understanding of an MRP or ERP systemPhysical & Mental Demands:, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone and via email and other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required, • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job Description Embedded Software Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for developing optimized software to support the prototypes of integrated x-ray sources and high voltage generators. Job Description • Design and create requirement specifications for the Microcontrollers to be used in High Voltage power supply designs, • Test units, integration of firmware and GUI (Graphical User Interface) changes, • Maintain Software Version Control (SVN) and release management systems, • Provide documentation for third party integration into the firmware and customer support to debug software issues, • Program Data Acquisition based GUI’s using serial communication (RS232) and Ethernet Communication (TCP/IP) protocols, • Work with cross-functional team to design and develop new products and improve existing designs, • Safety Sensitive Position Essential Skills • Bachelor’s Degree or higher in Electrical and/or Computer Engineering, • Demonstrated ability to write firmware for industrial control equipment, • Minimum of two (2) years of experience with NI, LabVIEW, Microsoft Visual Studio C++/VB/C#, Embedded C and RTOS, • 2-3 years of experience with Freescale products (MC56F8037 7 ARM) microcontrollers, • Ability to work with Analog and Digital Circuits based PCB designs like Op Amps, ADC, DAC & multi-functional IC’s, • Knowledge of RS-232 and TCP/IP communication standards, • Proficient in Microsoft Office Suite, • Perform software development and version control adhering to SCRUM standard, • Proficiency in the English language with well-established written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Collaboration and creative thinking skills, • Knowledge of radiographic imaging systems for industrial and medical inspection, • Strong background in understanding x-ray tube design of high voltage generators to power up X-ray sources, • Prior experience developing wireless security protocols Physical & Mental Demands: • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and/or by air. Overnight stays may also be required., • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels

Job Description Embedded Senior Software Engineer – Aerospace/Industrial • Location: Central Islip, NY, • Employment Type: Permanent, Full-Time, • Shift: 1st Shift, Monday–Friday (flexible), • Compensation: $127,000–$137,000 + 12.5% annual bonus, • Work Arrangement: 100% onsite, • Citizenship Requirement: Must be a U.S. Citizen, • Job ID: bh18176 About the Role A highly respected engineering organization in the fluid systems space is seeking a Senior Embedded Software Engineer to lead and execute critical development projects for advanced measurement and control technologies used in aerospace and industrial applications. This is a great opportunity for an engineer who thrives in a regulated environment and enjoys seeing a project through from concept to completion. If you’re an embedded software engineer who loves hands-on development, tackling complex technical challenges, and partnering closely with systems and hardware teams, this role offers long-term career growth and impactful work. What You’ll Do This role is split approximately 75% software development and 25% project leadership, including owning full project lifecycle execution. Responsibilities include: • Develop embedded software in C and/or model-based tools such as SCADE, • Create high-level and low-level software requirements, • Develop requirements-based test cases and verification procedures, • Conduct software integration testing on target hardware using real and simulated I/O, • Analyze requirements, design, and code to ensure compliance with industry standards, • Perform traceability analysis from customer specifications to software implementation, • Participate in formal certification audits and regulatory reviews, • Collaborate closely with Systems and Hardware Engineering teams, • Lead assigned projects from planning through execution Required Qualifications • Bachelor’s degree in Software Engineering, Computer Engineering, Computer Science, or a related discipline, • 5+ years in embedded software development, verification, or integration, • Prior experience working in a regulated environment (Aerospace, Industrial, Automotive, Medical, Rail, etc.), • Strong proficiency with embedded systems and microcontrollers, • Excellent analytical, communication, and problem-solving skills, • Demonstrated ability to lead and execute projects end-to-end, • Must be a U.S. Citizen for site security requirements, • Ability to work 100% onsite in Central Islip, NY Highly Preferred Experience • Strong hands-on experience with C programming, • Model-based development using SCADE, • Embedded control system development, • Agile project planning and execution, • Requirements management tools (DOORS / DOORS Next Gen), • Digital signal processing or digital filter design, • ARM microprocessor experience, • Familiarity with serial communication protocols (CANbus, ARINC, RS-232, etc.), • Knowledge of software certification standards such as:, • DO-178, DO-330, DO-331, • IEC 61508, ISO 26262, EN 50128, • Functional safety frameworks (ARP4761, ISO 13489, IEC 62061, etc.) Why Consider This Opportunity? This employer offers an extremely competitive benefits package, including: • Comprehensive medical, dental, vision, and prescription coverage, • 401(k) with 100% match on the first 5%, • Company-funded retirement contributions (3% annually), • Paid parental leave and adoption assistance, • Tuition reimbursement and professional development support, • Paid Time Off + 13 paid holidays, • Additional voluntary benefits (legal, identity protection, pet wellness, etc.), • Short-term and long-term disability at no cost How to Apply If you have strong embedded software experience in a regulated environment and enjoy leading technical projects, I’d love to speak with you! Company DescriptionConnexion Systems & Engineering is a full-service staffing firm, whose mission is to provide "best in class" staffing services to our clients and job seekers alike. We strive to achieve excellence in staffing, job placement and recruiting services, while treating our clients, employees, and candidates with the professionalism and respect they deserve.Connexion Systems & Engineering is a full-service staffing firm, whose mission is to provide "best in class" staffing services to our clients and job seekers alike. We strive to achieve excellence in staffing, job placement and recruiting services, while treating our clients, employees, and candidates with the professionalism and respect they deserve.

Job Description Design Engineer Bohemia, NY • US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Design Engineer to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturers, automotive and consumer industries worldwide. The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to: • Design custom structural test fixtures that meet customer statement of work requirements, • Create fixture concepts based on requirements, • Develop a design from concept through completion based on discussions with the internal engineering team and end user/customer, • Interfaces with customers and the engineering team to translate design needs, • Participate in and conduct initial and ongoing design reviews, • Select appropriate structural material based on engineering analysis, • Use Autodesk Inventor to create drawings of machined parts, weldments, schematics and top and sub-assemblies, • Create drawings to commercial standards that can be used for fabrication and assembly, • Prepare bills of materials that include fabricated parts, standard hardware, and applicable test instrumentation, • Apply tolerances to ensure parts are produced with the desired fit, • Demonstrate a basic understanding of data acquisition systems and hydraulic/pneumatic control systems., • Familiarity with various fabrication methods, • Prepare fabrication plan and fixture assembly procedures, • Act as the technical contact for the fabricators and assemblers during the production phase of projects, • Supporting quoting efforts for Design/Fabrication as needed, • Collaborate with Project Managers to status ongoing projects, • Provide project engineering support during all aspects of the test program, • Manage test programs. Some of the areas of testing include structural testing, armament, pressure, and windblast., • Coordinate required resources and schedule required to conduct testing, • Interface with customers, • Write test procedures and test reports, • Travel as required within the continental US, • Overtime will be required during certain periods of a project Required Qualifications: • BSME or comparable, • 4+ years' experience working as a Design Engineer, • Currently hold an FE certification and eligible to go for a PE, • A PE licensure will eventually be required, • Strong proficiency using Autodesk Inventor/ Assembly handling or equivalent software, • Experience in mechanical CAD design (Autodesk Inventor), ability to perform simple design hand calculations, fixture design, and especially fixture design for testing products, • Knowledge of FEM/Analysis, • Must be a US Citizen and able to pass a drug test and background check, • Expertise in defense, aerospace, telecom, commercial, and/or automotive product qualification requirements, • Ability to read and interpret test specifications, • Must be computer literate, including MS Office, • Must be able to work in a fast-paced work environment, • Ability to work without supervision and to provide technical consultation and guidance, • Experience managing labor and resource schedules, • Strong communication skills, both written and verbal, • Demonstrated technical innovation/guidance, project management, and problem solving, • Experience in using FEM software like ANSYS is a plus but not required, • Experience with CNC machining beneficial but not required Dayton T. Brown, Inc. offers: • Competitive salaries, • Tuition Reimbursement at up to 100%, • Medical/Dental/Vision/FSA, • 401k with company matching, • Paid time off, • Group life insurance, • Employee activities, • A family-friendly work culture Job Posted by ApplicantPro

Job Description Licensed Professional Engineer Engineering Skills required: • Structural Engineering- design, analysis, calculations, field evaluations, wood, steel, concrete, • Civil Engineering- site design, wastewater, drainage, retaining walls, grading, • Building Inspections- pre-purchase, system specific structural and/or diagnosis, • AutoCAD, • Professional Engineer preferred, Intern or degreed engineer will be considered Business Skills required: • Manage multiple projects on quick turnaround, • Organized, • Client communication Other requirements: • Must have vehicle and valid driver's license Part time will be considered Company DescriptionPacifico Engineering is a professional engineering company supporting the real estate, construction, and green energy and environmental industries. Our company's success stems from a philosophy of providing our clients with superior service and fast turnaround through a staff of quality-minded professionals. We provide building inspections in the real estate, construction, and municipal compliance fields. We provide design and consultation to new and emerging green technologies and safety related fields. We are a leader in structural design and code compliance for the solar energy industry. We are growing in the environmentally friendly water management industry We are growing in the fire safety industry We are a progressive company, looking towards the future providing environmentally friendly and safety related design and consultations. We differentiate ourselves by our quick turnaround and customer support.Pacifico Engineering is a professional engineering company supporting the real estate, construction, and green energy and environmental industries. \r\nOur company's success stems from a philosophy of providing our clients with superior service and fast turnaround through a staff of quality-minded professionals. \r\nWe provide building inspections in the real estate, construction, and municipal compliance fields. \r\nWe provide design and consultation to new and emerging green technologies and safety related fields. \r\nWe are a leader in structural design and code compliance for the solar energy industry. \r\nWe are growing in the environmentally friendly water management industry\r\nWe are growing in the fire safety industry\r\nWe are a progressive company, looking towards the future providing environmentally friendly and safety related design and consultations. \r\nWe differentiate ourselves by our quick turnaround and customer support.

Job Description Vacuum Instruments Corporation is one of the world’s largest companies devoted solely to the research, design, manufacture, distribution, and service of leak detectors, gas handling equipment, and complete leak detection solutions. VIC is the only company in North America to offer both organically manufactured instruments and custom systems for tracer gas and air leak tests as well as gas management. VIC’s staff of engineers, system design personnel and applications specialists constitute the most experienced body of leak detection experts in the world. Vacuum Instruments Corporation (VIC) offers an unparalleled breadth of application knowledge and gas handling experience along with the fastest, simplest, and most robust leak detectors in the industry. Billions of products have been tested with VIC complete turnkey leak detection solutions, portable vacuum-type helium sniffers, general purpose helium leak detectors, as well as mass flow and pressure decay systems. We are seeking a Service Repair Trainee, who is able to be trained on how to offer a customized, service assessment approach for made to unit and systems for service, preventative maintenance, re-calibration, for the customers we serve. The Entry-Level Service Repair Trainee will perform various activities, in support of the standard leak detection systems, leak detectors and gas processing equipment that VIC designs and manufactures. We are seeking a self-starter, to begin as a trainee committed to delivering a high level of customer satisfaction, maximizes customer retention, and increases profitability, potentially growing into a full-time Service Technician (Engineer) role. The candidate will be based in our Corporate Office in Ronkonkoma, NY. Mandatory Must Haves: • 2-3 Years of solid prior Mechanical experience, • Electrical experience helpful, but not required, we are willing to provide training, • Willingness to eventually develop with the company and potentially be promoted into a more advanced role, which would then involve traveling, • Clean background check and Motor Vehicle Report, • Must reside on Long Island, • Maintain your own transportation Provide Entry-Level Service Repair Support in the following areas: • Provide service and customer support., • Support installations, repairs, maintenance, and test tasks., • Diagnose technical problems and determine proper solutions., • Perform preventative maintenance and repairs., • Produce timely and detailed service reports., • Document processes., • Follow all company procedures and protocols., • Communicate with technical team regarding open issues., • Comprehend customer requirements and make appropriate recommendations/briefings., • Build positive relationships with customers. Job Type: Trainee Job Type: Full-time Experience Required: • Leak Testing : 2 years (Required) Ability to Commute: • Ronkonkoma, NY 11779 (Required)

Are you ready to join an award-winning MSP recognized as one of the Best Places to Work? Techworks Consulting is seeking a talented and driven MSP Senior Engineer to support unique, complex customer environments while collaborating closely with a tight-knit, supportive team. If you're passionate about IT and thrive in a dynamic, hands-on setting, this on-site role in Ronkonkoma, NY could be the perfect opportunity for you! We’ll Provide: • Robust benefits package including health insurance, dental, 401K, PTO and holidays, • Salary range of $85,000-$120,000, • Opportunities for continued growth and learning, • Great company culture supported by strong core values What You’ll Do: • Serve as a field resource for onsite projects, troubleshooting, and deploying new equipment, • Consult with clients on hardware/software rollouts and provide training on deployed systems, • Manage and support Windows Server, Virtualization, Cloud Platforms, Active Directory, and Group Policy, • Plan and execute projects with effective time management and organizational skills, • Perform local and cloud server migrations, including Microsoft Office 365 migrations, • Assist Security Engineers with compliance, risk assessments, and business continuity planning, • Troubleshoot networks (routers, firewalls, switches, cabling) and conduct wireless network assessments, design, and heat mapping, • Collaborate with the Technical Account Management team on Sales Engineering requests Skills You’ll Need: • Minimum 3 years of experience in Managed Services and/or IT Consulting, • Certifications from Microsoft, CompTIA, or Cisco or the ability to obtain in 90 days, • Proficiency with RMM tools, backup solutions, and ticketing systems, • Strong Windows Server/Workstation installation, configuration, and troubleshooting skills, along with UTM/router/switching/wireless experience, • Excellent customer service skills, • Strong communication, troubleshooting, problem-solving, and organizational skills, including accurate time entry and documentation Next Steps: • Quick apply with your resume here OR, • Get a head start on our application and aptitude testing process here:

Are you ready to join an award-winning MSP recognized as one of the Best Places to Work? Techworks Consulting is seeking a talented and driven MSP Senior Engineer to support unique, complex customer environments while collaborating closely with a tight-knit, supportive team. Assist Security Engineer

Job Description Introduction Are you a technology-focused, problem solver individual looking to jump-start your career? If so, we’ve got an exciting opportunity for you. We are IVIONICS, a growing technology organization in search of a talented Level I Systems Engineer to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills., • Competitive Compensation. We recognize your hard work and want to reward you for it. In addition to a competitive salary, all employees are eligible for a comprehensive suite of additional benefits including: medical/dental/vision, retirement plans, paid-time off, and more.Responsibilities:, • Maintain quality and professionalism while delivering expert client services focused on the timely resolution of issues, • Receive incoming technical issues for all company-supported technologies. This includes software, hardware, and operating systems. It will also include desktops, laptops, wireless devices, peripherals, and commercial and proprietary software within the organization., • Perform general break/fix functions and perform preventative maintenance as required: assisting desktops, laptops, wireless devices, and peripherals in person and/or remotely. Basic hardware/software troubleshooting may also be required for servers and other network components., • Providing services such as building, configuring, and installing desktops, laptops, wireless devices, peripherals, etc., • Escalate issues and requests to higher levels (engineering teams, application development, third-party vendors, etc.) whenever necessary in accordance with pre-defined SLAs., • Open, track, escalate, and resolve each assigned ticket in our in-house problem ticketing system.Requirements:, • Bachelor’s degree in an IT-related discipline or equivalent work experience., • 1-2 years full-time experience in a technical support role., • Technical certification in a relevant technology discipline. (preferred), • Must have reliable transportation., • Able to work in a fast-paced, high-pressure environment., • Excellent oral and written communications skills., • Excellent Customer Service skills., • Security-related technologies (multi-factor authentication, application control, encryption solutions, etc.), • Microsoft Windows version through Windows 10 Operating Systems for desktops & laptops, • Microsoft Office versions through Office 365, • Wireless devices and networks, • Microsoft Windows Server, Active Directory, and associated services (DNS, WINS, DHCP, etc.), • Microsoft Exchange Server and Cloud mail services, • Networking architecture and equipment (routers, firewalls, switches, cabling, VoIP, etc.), • Backup-related technologies (hardware/software and cloud solutions), • Hard Drive Imaging, • Salary: $50,000 - 60,000/year based on experience, • A team/family work environment, • Business casual dress code, • Medical, Dental, Vision, HSA & FSA, • 401k and Profit Sharing Powered by JazzHR L41qzOXtNC

Job Description Introduction Are you a technology-focused, problem solver individual looking to jump-start your career? If so, we’ve got an exciting opportunity for you. We are IVIONICS, a growing technology organization in search of a talented Level II Systems Engineer to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills., • Competitive Compensation. We recognize your hard work and want to reward you for it. In addition to a competitive salary, all employees are eligible for a comprehensive suite of additional benefits including: medical/dental/vision, retirement plans, paid-time off, and more.Responsibilities:, • Deliver expert service focused on the timely resolution of issues while exceeding client expectations for quality and professionalism., • Receive incoming technical issues and requests that will include software, hardware and operating system problems for all company and customer-supported technologies. This will include desktops, laptops, wireless devices, peripherals, and commercial as well as proprietary software within the organization., • Perform general break/fix and preventative maintenance functions as necessary: provide hands-on and/or remote support to desktops, laptops, wireless devices, and peripherals. You may also be required to perform basic hardware/software troubleshooting on servers and other network components., • Perform all build, configuration, and install services for desktops, laptops, wireless devices, peripherals etc., • Escalate issues and requests to higher level (Engineering Teams, Application Development, 3rd-party Vendors, etc.) whenever necessary in accordance with pre-defined SLA’s., • Open, track, escalate and resolve each assigned ticket in our in-house problem ticketing system.Requirements:, • Bachelor’s degree in an IT-related discipline or equivalent work experience., • 2-4 years full-time experience in a technical support role., • Technical certification in a relevant technology discipline. (preferred), • Must have reliable transportation, a valid NYS driver’s license and be willing to travel throughout the New York Tristate area., • Able to work in a fast-paced, high-pressure environment., • Excellent oral and written communications skills., • Excellent Customer Service skills., • Able to interact effectively with all levels of internal and customer contacts., • Able to work flexible shifts (7am-6pm, M-F, 8:30-5:30 Tues-Sat, 8:30-5:30 Sun-Thurs) and be available for 24x7 off-hours coverage rotation (nights & weekends)., • Security related technologies (multifactor authentication, application control, encryption solutions, etc.), • Microsoft Windows version through Windows 10 Operating Systems for desktops & laptops, • Microsoft Office versions through Office 365, • O365 Migrations and Management, • Wireless devices and networks., • Microsoft Windows Server, Active Directory, and associated services (DNS, WINS, DHCP, etc.)., • Microsoft Exchange Server and Cloud mail services., • MS Intune Experience, • VMware, • Implementation of Firewalls, • Implementation of Switches, • Meraki Wireless, • Networking architecture and equipment (routers, firewalls, switches, cabling, VoIP, etc.), • Backup-related technologies (hardware/software and cloud solutions), • Hard Drive Imaging Powered by JazzHR g4gyvMYAG7