Trabajos digital fabrication en Union City, New JerseyCrear alertas

Job Description JOIN THE TEAM THAT IS REDEFINING ARCHITECTURAL INNOVATION Eventscape is seeking a proactive Installation (Construction) Site Foreman to lead our projects on the front lines during the crucial final stage—installation. In this critical role, you will oversee construction laborers and trades and be hands-on when required during installation. This position requires frequent travel, both domestically and internationally, so candidates must be able to travel without restrictions and maintain all necessary travel documentation. * This position is based in New York, working on different sites * WHO ARE WE? Eventscape is a global leader in custom architectural fabrication, committed to tackling challenging designs and pushing the boundaries of innovation. We specialize in engineering, fabricating, and installing cutting-edge projects for top architects, designers, developers, contractors, and artists. With state-of-the-art machinery and a commitment to both traditional craftsmanship and advanced digital fabrication, Eventscape is where innovation meets excellence. ABOUT THE ROLE As the Installation Site Foreman, you will: • Install interior and exterior prefabricated products accurately and precisely., • Travel globally for installations, sometimes on short notice., • Supervise construction staff, contractors, suppliers, and trades to ensure on-time completion while maintaining rigorous safety standards., • Address challenges effectively through communication and collaboration., • Conduct site visits and surveys, evaluate fabrication and installation methods, and perform daily inspections to uphold quality standards., • Serve as a liaison with clients, providing exceptional service, and ensuring their vision is realized., • Support our in-house fabrication teams when not on site, providing valuable installation insights., • Interpret engineering drawings and specifications, assessing project requirements, and ensuring compliance with procedures and regulations., • Maintain no-restriction travel status for frequent local and international travel. ABOUT YOU We're looking for someone with: • 5+ years site management experience in demanding construction environments., • A wealth of construction expertise, with proven ability to supervise union and non-union subcontractors in construction., • Proficiency with construction tracking software., • A strong understanding of building codes and a meticulous approach to safety regulations., • Familiarity with common construction tools and equipment., • Proficiency in interpreting blueprints and technical drawings., • A relevant degree (e.g., Construction Management, Construction Science, Civil Engineering) or equivalent practical experience., • Exceptional problem-solving skills and a knack for strategic planning., • A valid driver's license and spotless driving record., • Experience in client-facing roles and a passion for delivering exceptional service., • Strong organizational skills and attention to detail., • Hands-on fabrication experience (e.g., finish carpentry, metal fabrication, etc.)., • Commitment to project success, including a readiness for frequent domestic and international travel. APPLY NOW Don't miss this opportunity to join the team that's shaping the future of architectural innovation. If you're ready to bring your expertise and passion to our dynamic environment, apply now with your resume. Be sure to highlight your experience in supervising construction for large or complex custom finish projects. Join us as we Build the Extraordinary! For more information or if you need disability accommodation, contact human resources at (416) 231-8855. We wish to thank all applicants for their interest in Eventscape, but only those selected for an interview will be contacted. Eventscape is committed to fostering a workplace in which individual differences are recognized, appreciated, and respected. Eventscape will consider all qualified candidates and welcomes and encourages applications from people with disabilities. Accommodations are available for all stages of the selection process. Powered by JazzHR GjD7wf9tOI

Job Description We are seeking a highly skilled, organized, and dependable Lead CNC & Digital Fabrication Specialist to provide technical leadership across CNC machining, machine setup, and digital fabrication production for fast-paced, creative projects. Reporting functionally to the Digital Fabrication Department Head or assigned Production leadership, and working closely with Project Managers, Production Managers, and Technical Designers, this position drives machine-based production across the project lifecycle. This role is responsible for CNC programming, machine setup, production support, quality control, troubleshooting, and mentoring junior team members. The ideal candidate is highly capable in Rhino and Fusion 360 CAM, resourceful, proactive, and comfortable working in an environment where priorities can shift quickly, with the ability to take ownership of complex work, communicate clearly, and deliver accurate, high-quality results. This role is intended for a senior technical specialist with the potential to develop into broader department leadership as the Digital Fabrication Department continues to grow. Salary Range: $35 – $45 / hour (Dependent on experience) PRIMARY RESPONSIBILITIES CNC Programming, Machining & Digital Fabrication • Program, set up, and support CNC production using Fusion 360 CAM and related shop workflows., • Translate Rhino models, drawings, and project documentation into accurate, production-ready machine workflows., • Develop and optimize CNC machining strategies for complex, 2-sided, sculptural, and nested sheet-good workflows., • Select appropriate CNC tooling, feeds, speeds, fixturing, and machining parameters based on part and machine requirements., • Select appropriate digital fabrication strategies, materials, settings, and setup methods across related equipment., • Operate Homag, Weeke, laser, 3D printing, thermoforming, and related equipment in accordance with shop standards., • Monitor machine performance and troubleshoot programming, tooling, or machine-related issues., • Inspect digitally fabricated components for accuracy, finish quality, and alignment with design intent. Workflow Coordination & Cross-Department Collaboration • Collaborate with Project/Production Managers, and Technical Designers to align scope, schedule, and shop capacity., • Adapt design-provided 3D models for DFAB production through review, flattening, batching, labeling, and Design coordination., • Develop fabrication means, methods, and production strategies for complex builds., • Execute assigned machine queues while supporting planning around staffing, training, and production capacity., • Communicate production status and flag capacity, schedule, tooling, machine, material, or consumable concerns., • Participate in pre-production planning and post-project reviews to support execution and improve workflows., • Support peak-period AM/PM shift coverage, extended hours, evenings, or weekends when workload requires., • Collaborate across departments and take on tasks as needed to support overall shop capacity. Standards, Organization & Continuous Improvement • Maintain organized CAM files, machine settings, handoff notes, reports, and production documentation., • Support machine incident reports, production reports, and project-based material usage tracking., • Support development of department standards, SOPs, training materials, and documentation systems., • Reinforce standards across programming, setup, file organization, and production handoffs., • Coordinate material workflows, including sheet staging, nesting priorities, and machine readiness., • Monitor tooling, materials, and consumables, proactively flagging shortages and recurring issues., • Proactively identify bottlenecks, documentation gaps, and opportunities for workflow improvement., • Utilize CutRite and material management systems to support workflow optimization and material efficiency., • Support preventive maintenance and upkeep of CNC and related equipment, ensuring machines remain production-ready., • Stay current with relevant digital fabrication tools, materials, and production methods., • Maintain a clean, organized, and safe work environment, following all shop safety protocols., • Mentor, train, support, and onboard CNC Operators, Digital Fabrication Technicians, and freelance/seasonal support. ABOUT US TWOSEVEN is a multidisciplinary design/build firm located in Brooklyn, New York. We specialize in creating store window displays, retail interiors, showrooms, and event activations for high-profile fashion, luxury, and lifestyle brands. TWOSEVEN offers a wide range of services - combining a design studio, fabrication workshop, and installation team, all under one roof. We devote ourselves to excellent craftsmanship, high-quality design, and attention to detail. Join our creative, friendly, and dynamic workplace. TWOSEVEN is an Equal Opportunity Employer. Requirements • High school diploma or equivalent; background in industrial design, architecture, or related field preferred., • 4+ years of CNC machining and CAM programming experience in fast-paced creative production workshops., • Demonstrated proficiency in Fusion 360 CAM and Rhino; Grasshopper, WoodWop, WoodCAD|CAM, or similar software a plus., • Ability to execute complex machining operations, including multi-operation setups and 2-sided machining., • Ability to translate 3D models, shop drawings, and technical documentation into production-ready machine workflows., • Strong understanding of materials, tooling, feeds/speeds, fixturing, and fabrication methods., • Experience working with wood, MDF, plywood, plastics, foams, acrylics, laminates, and specialty sheet goods., • Experience with Homag/Weeke systems, CutRite, WoodWop, WoodCAD|CAM, or Intellistore preferred., • Hands-on experience with laser cutting and 3D printing workflows, including file prep, setup, and troubleshooting., • Working knowledge of thermoforming, plexi-polishing, fabrication, assembly, and material preparation methods., • Working knowledge of MS Office suite and Windows-based workflows, especially Excel., • Strong communication, organization, problem-solving, and leadership maturity when working cross-functionally., • Calm, collaborative, detail-oriented, and adaptable in fast-paced production environments., • Must be professional, punctual, and dependable, with a strong sense of accountability., • Must be available to work extended hours, evenings, and weekends during peak fabrication periods., • Physically capable of lifting and handling oversized sheet goods., • Forklift / hi-lo experience or willingness to be trained and authorized preferred., • Must be eligible to work in the U.S. Benefits • Employee Health Insurance. Three plans are available after a two-month waiting period, with TwoSeven covering from 55 to 70% of the premium., • (401k) After one year of employment, up to 4% of the salary matched., • Profit-sharing of up to 5% of salary after 1 year of employment., • Up to 80 hours PTO per year., • Up to 40 hours of sick leave per year., • 6 Paid holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day)., • Life, short-term, and long-term insurance., • Paid Family Leave.

Job Description We are seeking a Driver to join our team! Responsibilities: • Safely operate a Cargo Van, • Load and unload cargo, • Properly track and document activity log, • Inspect truck before and after trip Qualifications: • Minimum 3 Years experience in truck driving or other related fields, • Commercial driver's license, • Driver must be able to operate a 26' Straight Truck with Manual Transmission, • Strong work ethic, • Must be able to read and speak English Clean License and references a must. (A background check will be run) Knowledge of the Tri-State & NYC area a must This is a full time position Company DescriptionOvation In-Store is a leading provider of point-of-purchase design and digital displays for some of the most recognized international brands throughout the world. Servicing global brands who need a retail advantage, Ovation In-Store offers a one-source solution by providing proprietary programs through development, design, technology and software. Headquartered in Maspeth, NY and servicing global clients such as Target, Estee Lauder, DKNY, L'Oreal and Victorias Secret, Ovation In-Store helps industry-leading brands gain the competitive edge. Ovation In-Store provides a team of experts in fabrication and design along with key innovators in technology and implementation. Ovation In-Store's unique and unsurpassed specialization in the integration of technology applications include digital signage (operate proprietary hardware + software; manage network), custom LCD panels, dvLED, CMS and flash based media players, interactive kiosks, RFID, UPC Bar-code scanners, mobile and micro-switch technology, integratedOvation In-Store is a leading provider of point-of-purchase design and digital displays for some of the most recognized international brands throughout the world. Servicing global brands who need a retail advantage, Ovation In-Store offers a one-source solution by providing proprietary programs through development, design, technology and software.\r\n\r\n\r\n\r\nHeadquartered in Maspeth, NY and servicing global clients such as Target, Estee Lauder, DKNY, L'Oreal and Victorias Secret, Ovation In-Store helps industry-leading brands gain the competitive edge. Ovation In-Store provides a team of experts in fabrication and design along with key innovators in technology and implementation.\r\n\r\nOvation In-Store's unique and unsurpassed specialization in the integration of technology applications include digital signage (operate proprietary hardware + software; manage network), custom LCD panels, dvLED, CMS and flash based media players, interactive kiosks, RFID, UPC Bar-code scanners, mobile and micro-switch technology, integrated

Located in Jersey City, NJ, ideal for educators who live locally or currently commute into NYC and are looking for a closer, more sustainable school community. This is a full-time, on site role designed for educators with experience teaching project-based learning in a public middle school setting. This role is for the 2026-27 school year and will begin in August 2026. Company Description Kindle Education is an intentionally diverse 6th–12th grade public charter school that aims to cultivate an equitable community of purposeful individuals who are prepared to navigate our current world and build our future. We believe that a new model of school is required to meet the demands of the 21st century and we are building it. We opened our doors to 66 6th-grade students in the fall of 2023 in Jersey City, NJ. Two years later, Kindle now serves 6th–8th grade students, with plans to expand through 12th grade. We are seeking a Project-Based Learning Makerspace Teacher (Forge) to join our middle school team beginning in August 2026. Job Description Below is a brief overview, intended to be neither comprehensive nor binding. A flame is organic, never fixed, and we see the development of our school and team in the same way. As a Project-Based Learning Makerspace Teacher (Forge) at Kindle Education, you will play many roles. We believe education is best done as a team sport, we can accomplish exponentially more through collaboration. • As a Forge Teacher, you will lead a dynamic, hands-on makerspace where students bring ideas to life through design thinking and prototyping. Using the NuVuX curriculum, you will guide students through open-ended design challenges that integrate engineering, art, and storytelling. Students will learn to research, ideate, sketch, build, test, and iterate, developing both their technical skills and their creative confidence., • As a Student Coach, you will facilitate a daily advisory (Bonfire) where you partner with parents to guide a group of students as they explore their purpose, individuality/identity, and participate in community based change-making projects., • As a Learner and Team Member, you will set your own goals with the support of a coach and your peers, modeling the same curiosity and ownership we expect from students. By proactively supporting colleagues and stepping in where needed, you’ll help foster a culture where everyone feels seen, heard, and valued. Qualifications We are looking for creative and adaptive self-starters who are ready to take on the challenge of cultivating an environment that prepares every child to navigate our current world and build our future. Please review our website before applying (KindleEducation.org). • NJ Instructional Certificate or eligibility in Middle School (STEM, Design, Technology Education, or related field), or equivalent certification from another state strongly preferred., • Alignment with Kindle Education’s school model, mission, and values., • Experience with or willingness to develop skills in design thinking, digital fabrication, prototyping, and project-based learning., • Comfort using or learning design curricula, and integrating emerging technologies and creative tools., • A genuine excitement for student coaching and supporting the metacognitive and holistic growth of students., • Readiness to utilize technology, data, and systems of feedback to ensure transparency, consistency, and continuous improvement., • Preference for fast-paced and diverse startup cultures where everyone wears multiple hats., • Team player who is willing to give more than they take., • Strong belief in the importance of diversity and intentionally integrated communities., • Someone who seeks first to understand, then to be understood., • A love for learning, exploring, and tinkering. Comfortable with change, ambiguity, and occasional failure., • A high tolerance for fire metaphors. Additional Information We have bold aspirations for what a school can be and while we expect a lot from our team, we also give a lot in return. Every new team member participates in an onboarding experience designed to prepare them to deliver the Kindle Education learning model. Weekly grade-level and content team meetings ensure staff have space to collaborate and share best practices, while the Director of Learning provides consistent coaching. We provide a competitive compensation and benefits package that prioritizes the needs of you and your family. Salary range: $60,000–$90,000, based on experience. Diversity sparks innovation, creativity, and transformation. We are actively seeking candidates of varying backgrounds and perspectives. If you are looking for a place that values all you have to offer, come help us build it. Kindle Education is an equal opportunity employer. Work authorization is required (candidate must have permanent authorization to work in the U.S.).

Cornerstone Building Brands, headquartered in Cary, North Carolina, is the largest manufacturer of external building products in North America with over $6 billion in annual revenue and an expansive North American footprint that includes almost 20,000 employees, operating in +70 manufacturing facilities, supported by a network of +80 distribution and branch office facilities. We have a broad product offering with a well-regarded brand portfolio including the #1 position in windows, vinyl siding, metal accessories, metal roofing and wall systems, and insulated metal panels. We believe every building we create, and every part of that building, positively contributes to communities where people live, work and play. The primary responsibility of Drafter is to deliver complete and accurate drafting outputs, including drawings, shop details, and bills of materials (BOMs) while ensuring high quality and on-time delivery aligned with customer-specific requirements. This role demands advanced technical knowledge of commercial building systems, pre-engineered metal buildings (PEMBs), detailing tools such as AutoCAD, and a deep understanding of interdepartmental processes and services. Strong proficiency in advanced trigonometry and geometry is also required. Drafter 1 ESSENTIAL FUNCTIONS / RESPONSIBILITIES • Produce neat, accurate, and easy-to-follow fabrication documents that reflect design calculations and comply with manufacturing limitations., • Provide clear and accurate permits, approval, and erection drawings that meet purchase order requirements and include all necessary erection details., • Manage a dynamic schedule that may include last-minute additions or shifting priorities., • Communicate needs and challenges with the team to ensure timely resolution of issues., • Respond promptly to calls, emails, and other correspondence from customers, design, or manufacturing teams without causing delays., • Offer expertise to resolve field issues quickly and deliver required documentation to support customer service without impacting the schedule., • Strive for continual improvement in productivity, accuracy, and skill development., • Safeguard the company’s interests during field modification investigations., • Be willing to work overtime to meet critical deadlines when necessary., • Understand your role within the larger system and show flexibility to step outside of it when required., • Participate in peer reviews and accept constructive feedback as part of ongoing training and professional development. QUALIFICATIONS / SKILLS • Previous experience with PEMB (Pre-Engineered Metal Buildings) is not required., • Experience using detailing software such as Tekla, AutoCAD, Trimble Connect, etc., • Strong attention to detail., • Ability to adapt to different environments and collaborate effectively with others., • Capable of learning document workflows and following detailed instructions., • Able to work under pressure while adhering to established procedures and guidelines., • Proficient in mathematical and trigonometric calculations., • Effective communication skills across all levels of the organization., • Proficient with PCs, Microsoft Office, and general technology tools. EDUCATION / ADDITIONAL INFORMATION • High School Diploma or GED required., • Certification in AutoCAD, Tekla, or other design software is preferred. Drafter 2 ESSENTIAL FUNCTIONS / RESPONSIBILITIES • Produce neat, accurate, and easy-to-follow fabrication documents that reflect design calculations and comply with manufacturing limitations., • Create accurate permits, approval, and erection drawings that align with purchase order requirements and provide detailed instructions for material erection., • Manage tight schedules, often accommodating last-minute changes and shifting priorities., • Communicate needs, concerns, and obstacles with team members to ensure prompt issue resolution., • Respond quickly and professionally to calls, emails, and other correspondence from customers, design teams, or manufacturing—without compromising schedule commitments., • Offer expert support in resolving field issues and provide necessary documentation for customer service while minimizing schedule impact., • Continuously seek opportunities to improve productivity, accuracy, and overall performance., • Safeguard company interests when investigating field modifications or deviations., • Work additional hours when necessary to meet critical deadlines., • Understand your role within the broader organizational system and be willing to step outside that role when needed., • Participate in and provide back-checking feedback as part of continuous learning and development., • Mentor and coach less experienced drafters. QUALIFICATIONS / SKILLS • Minimum of 1 year of experience in metal building drafting., • Minimum of 3 years of experience using Tekla, AutoCAD, Trimble Connect, and other detailing software., • High attention to detail., • Adaptability and strong interpersonal skills., • Ability to understand document workflows and follow detailed instructions., • Ability to perform under pressure while adhering to established procedures and guidelines., • Strong mathematical and trigonometric calculation skills., • Effective communication and collaboration across all organizational levels., • Proficiency in Microsoft Office and general PC/technology usage. EDUCATION / ADDITIONAL INFORMATION • High School Diploma or General Equivalency Diploma (GED) required., • Certification in AutoCAD, Tekla, or related design software preferred. Drafter 3 ESSENTIAL FUNCTIONS / RESPONSIBILITIES • Produce neat, accurate, and easy-to-follow fabrication documents that adhere to design calculations and manufacturing limitations., • Generate precise permits, approval, and erection drawings that meet purchase order requirements and provide clear erection instructions., • Maintain tight schedules, including accommodating last-minute changes and shifting priorities., • Communicate effectively with Project Engineers, Design Engineers, and Detailers to resolve technical challenges promptly., • Respond quickly and professionally to calls, emails, and other correspondence from customers, design, or manufacturing teams without impacting schedule commitments., • Provide expert support in solving field problems and deliver necessary documentation to support customer service needs., • Continuously improve productivity, accuracy, and skillset., • Support and uphold drafting standards and best practices used by production detailers., • Protect company interests when assessing and addressing field modifications., • Work additional hours as needed to meet deadlines., • Understand your role within the broader system and contribute beyond it when required., • Participate in and provide back-checking feedback as part of professional growth and team development., • Coach, mentor, and train less experienced drafters., • Collaborate closely with builders and manufacturing stakeholders to ensure successful project execution., • Manage multiple ongoing projects concurrently—through both the fabrication shop and erection phase—while balancing individual responsibilities across overlapping priorities., • Ensure compliance with defined engineering processes and quality standards; support and track corrective actions as needed., • Champion initiatives that drive quality, innovation, and process efficiency. QUALIFICATIONS / SKILLS • Minimum of 2 years of experience in metal building drafting., • Minimum of 5 years of experience using Tekla, AutoCAD, Revit, Trimble Connect, and other detailing software., • Highly detail-oriented, with demonstrated experience managing multiple projects through fabrication and erection phases., • Adaptable team player with strong interpersonal communication skills., • Ability to document workflows, optimize processes, and follow detailed instructions., • Able to perform under pressure while complying with established procedures and guidelines., • Strong mathematical and trigonometric computation skills., • Proven ability to collaborate across all organizational levels., • Proficiency in Microsoft Office and general PC/technology tools. EDUCATION / ADDITIONAL INFORMATION • High School Diploma or GED required., • Certification in AutoCAD, Tekla, or other relevant design software., • Associate degree in Drafting or Architecture (preferred). Drafter 4 ESSENTIAL FUNCTIONS / RESPONSIBILITIES • Produce clean, accurate, and easy-to-follow fabrication documents based on design calculations and within manufacturing limitations., • Deliver precise permit, approval, and erection drawings that meet purchase order requirements and clearly guide material installation., • Adhere to demanding schedules, including managing last-minute changes and evolving priorities., • Collaborate effectively with Project Engineers, Design Engineers, and Detailers to resolve technical challenges promptly., • Respond quickly to calls, emails, and other correspondence from customers, design, or manufacturing—without impacting schedule commitments., • Provide expert-level support to resolve field issues and generate the required documentation for customer service., • Continuously improve productivity, accuracy, and technical skill., • Support and enforce standard drafting practices used by production detailers., • Represent company interests during the investigation and resolution of field modifications., • Work extended hours when necessary to meet project deadlines., • Understand the broader system and contribute beyond the immediate role when required., • Participate in and provide constructive back-checking feedback as part of continuous learning and training., • Coach, mentor, and train less experienced drafters., • Collaborate with builders and manufacturing stakeholders to ensure seamless project execution., • Manage multiple complex projects concurrently through both fabrication and erection stages, while effectively balancing overlapping responsibilities., • Ensure adherence to established engineering processes and initiate corrective actions as needed to maintain quality standards., • Lead initiatives that drive innovation, improve efficiency, and enhance overall product quality., • Serve as a subject matter expert for the most advanced and complex metal building designs. QUALIFICATIONS / SKILLS • Minimum of 5 years of experience in metal building drafting., • Minimum of 7 years of experience using Tekla, AutoCAD, Trimble Connect, and other detailing software., • Proven experience managing multiple ongoing projects through shop production and erection completion., • Detail-oriented with excellent time management and organizational skills., • Strong interpersonal skills and ability to work effectively in a collaborative environment., • Ability to map workflows, optimize processes, and write detailed procedural documentation., • Ability to perform under pressure while adhering to defined procedures and standards., • Solid understanding of technology, digital solutions, and model-based engineering practices., • Strong background in process improvement and operational efficiency., • Ability to interface with all levels of the organization, including cross-functional stakeholders and leadership., • Strong oral and written communication skills, with the ability to present to senior management., • Demonstrated deep competences in mathematical and trigonometric calculations., • Proficiency in Microsoft Office and general technology tools. EDUCATION / ADDITIONAL INFORMATION • High School Diploma or GED required., • Certification in AutoCAD, Tekla, or other design software preferred., • Associate degree in Drafting, Architecture, or a related field (preferred). Drafter 5 ESSENTIAL FUNCTIONS / RESPONSIBILITIES • Produce neat, accurate, and easy-to-follow fabrication documents that align with design calculations and manufacturing limitations., • Generate precise permit, approval, and erection drawings that comply with purchase order requirements and guide material installation., • Maintain tight project schedules, often accommodating last-minute changes or shifting priorities., • Communicate challenges and project needs to Project Engineers, Design Engineers, and Detailers to ensure timely technical resolution., • Respond promptly to calls, emails, and inquiries from customers, design teams, or manufacturing, ensuring minimal impact to project timelines., • Provide expert-level solutions for field issues and generate the necessary documentation to support customer service., • Continuously enhance productivity, accuracy, and technical expertise., • Support and enforce drafting standards used by production detailers., • Represent the company’s interests when investigating field modifications., • Work overtime as needed to meet critical deadlines., • Understand your role within the broader project system, and step beyond it when necessary., • Give and receive back-checking comments as a key part of professional development and team collaboration., • Coach, mentor, and train less experienced drafters., • Partner closely with builders and manufacturing stakeholders to drive project success., • Manage multiple complex projects through fabrication and erection phases, while balancing overlapping individual responsibilities., • Ensure conformance with defined engineering processes and initiate corrective actions as needed to maintain compliance with quality standards., • Lead initiatives to improve quality, drive innovation, and increase efficiency., • Serve as a subject matter expert in the highest-level and most complex metal building designs. QUALIFICATIONS / SKILLS • Minimum of 7 years of experience in metal building drafting., • At least 5 years of experience as a checker or quality inspector for buildings of complexity levels 1–10., • Minimum of 10 years of experience using Tekla, AutoCAD, Revit, Trimble Connect, and other detailing software., • Highly detail-oriented, with demonstrated ability to manage multiple concurrent projects through shop production and erection phases., • Strong adaptability and effective collaboration in team-based environments., • Ability to document workflows, optimize processes, and draft detailed instructions., • Capable of performing under pressure while adhering to established procedures and guidelines., • Solid understanding of technology, digital tools, and model-based engineering., • Strong background in process improvement and continuous development., • Effective communicator across all levels of the organization., • Excellent organizational and multitasking skills., • Strong oral and written communication skills, with the ability to present confidently to senior leadership., • Demonstrated deep competences in mathematical and trigonometric calculations., • High competency in Microsoft Office and general computer technology. EDUCATION / ADDITIONAL INFORMATION • High School Diploma or General Equivalency Diploma (GED) required., • Certification in AutoCAD, Tekla, or other design software preferred., • Associate degree in Drafting, Architecture, or a related field (preferred). All your information will be kept confidential according to EEO guidelines. The US base hourly range for this full-time position is $24.03-$46.15+ medical, dental, vision benefits starting day 1 + 401k and PTO. Our pay ranges are determined by role, level, and location. Individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. (Full-time is defined as regularly working 30+ hours per week.) Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster . You can also view Your Right to Work Poster along with This Organizations Participation in E-Verify Poster . If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or _. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. _ Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

David Webb is adding a CAD Modeler to its growing team. The CAD team works directly with David Webb’s lead creatives, its archives, and its master jewelers in the workshop (right down the hall!) to execute new, legacy, and custom designs at retail prices from $5,000 through $1MM and above. The role will work alongside our team of highly-experienced designers and CAD modelers. (While candidates from related fields such as the video game and toy industries will be considered, specific experience with jewelry CAD modeling is strongly preferred.) Key tasks will include: • Creating 3D models from reference images and/or existing models, • Scanning existing molds and creating mesh for the company’s extensive library, • Working with the company’s creative design team to develop new ideas, • Collaborating with the workshop throughout the creation process, • Managing the casting process, including communicating directly with vendors to place and monitor the progress of casting orders, • Working closely with the sales team to execute against custom orders for high-priority clients, • Preserving the company’s master models, • Working with the rest of the CAD team in order development, product development, prioritization, and organization Requirements … • Strong knowledge of rhino and/or zbrush are absolutely required, • Advanced knowledge of subD & hard surface modeling, • Digital sculpting experience (jewelry, video games, toy design, fabrication, etc) You are … • Able to interpret 2D renderings in 3D format, • Able to work both collaboratively and independently, • Extremely organized and detail-oriented, • Self motivated and able to work in a tight deadline, • A pleasure to work with (really!) This is a full-time, in-house position in the office on New York's Upper East Side. Due to the high degree of collaboration, remote employment will not be considered for this role. Relocation will be considered on a case-by-case basis. Minimum of 5 years of total work experience is required, as are a relevant degree and portfolio. Please send resume and portfolio to careers@davidwebb.com, with "CAD Application" in the subject line.

Lumenci is seeking a Senior Semiconductor IP Consultant to support high-stakes patent litigation, IP strategy, and patent monetization for leading law firms and global technology companies. This role is ideal for experienced professionals with deep expertise in semiconductor systems and design, including SoC, ASIC, FPGA, microprocessors, process nodes (7nm/5nm), and industry standards such as JEDEC, IEEE, and PCIe. About Lumenci Founded in 2018, Lumenci is a premier intellectual property consulting firm specializing in patent litigation, expert witness testimony, and patent monetization for leading corporations and global law firms operating across the software, telecommunications, semiconductors, and emerging technology sectors. A key part of Lumenci’s model is the integration of deep technical expertise with litigation strategy. Our teams support high-stakes disputes by developing technical narratives, performing rigorous analysis, and partnering with world-class expert witnesses whose testimony shapes case outcomes in courts and arbitration forums worldwide. Headquartered in Austin, Texas, with offices in San Francisco, New York, and Gurugram, India, Lumenci delivers end-to-end support spanning technical analysis, expert strategy, valuation, and monetization execution. Our differentiated approach, which includes combining engineering depth, litigation experience, and operational rigor, has resulted in long-term partnerships with leading law firms and technology companies navigating complex IP disputes. Lumenci is backed by VSS Capital Partners (“VSS”) and Century Equity Partners (“CEP”). VSS is a private equity firm dedicated to investing in tech-enabled business services, healthcare, and education companies. Since 1987, VSS has managed eight private capital funds with aggregate committed capital of nearly $4 billion across 103 platform companies and over 600 add-on acquisitions. VSS’s investment in Lumenci was from VSS Structured Capital IV, L.P. (“VSS SC IV”), a $530 million fund which had its final closing in December 2022. CEP is a private equity firm headquartered in Boston, MA, that partners with companies seeking investments to support growth or fund acquisitions, partial buyouts, or recapitalization opportunities. How We Work at Lumenci • Solve for the Customer: Lumenci is a customer-first company, focused on creating long-term relationships with our clients. Customers include internal employees and candidates who are part of the recruitment process., • Quality, Ownership, and Accountability: We are passionate about results and take full ownership of our work. We are performance-oriented and driven by excellence., • Collaboration: We encourage collaboration over competition, work in small teams, and believe that teams do better than individuals., • Growth Mindset: We are adaptable to the changing requirements and needs of a dynamic high-growth company and encourage each other to take diverse initiatives and develop new competencies. Role Type and Work Arrangement • Employment Type: Full-time, exempt, • Work Arrangement: Remote, US-based, • Location: Candidates may be located anywhere in the United States, subject to being legally authorized to work in the United States without sponsorship., • This role may require approximately 40% domestic travel for client meetings, expert meetings, source code reviews, depositions/trials, and conferences. Responsibilities and Duties: • Provide strategic consulting to law firms and corporate clients., • Assess and analyze patent portfolios to uncover strengths, weaknesses, and monetization opportunities., • Offer expert insights on semiconductor industry trends, technical standards (JEDEC, IEEE, ISO), and their patent implications., • Work with cross-functional teams to align IP strategy with business goals and technology roadmaps. Semiconductor Industry Experience: • In-depth knowledge of processor architectures, memory technologies, analog/digital IC design, and semiconductor fabrication processes., • Experience with microprocessors, microcontrollers, ASIC/FPGA design, and system-on-chip (SoC) integration., • Hands-on experience with semiconductor process nodes (7nm, 5nm, etc.) and foundry ecosystems., • Familiarity with DDR, PCIe, USB, MIPI, IEEE 802.11, and JEDEC semiconductor standards., • Proficiency in Cadence, Synopsys, Mentor Graphics, and semiconductor verification methodologies. Strategic Consulting and Leadership • Lead and mentor teams conducting semiconductor technology research, IP analysis, and patent portfolio evaluations., • Communicate complex semiconductor concepts to legal teams, executives, and investors in a clear and actionable manner., • Provide strategic guidance to US-based clients, including industry experts, corporate counsel, CEOs, startup founders, and IP litigators., • Publish industry reports, whitepapers, and thought leadership content on emerging semiconductor and IP trends., • Collaborate with global teams to ensure alignment between IP strategy and business goals., • Cultivate relationships with key industry stakeholders to drive business impact and influence semiconductor innovation. Required Skills & Competencies Technical Expertise: • Strong understanding of semiconductor architectures, digital/analog circuit design, and fabrication processes., • Experience with processor design, SoC development, and semiconductor IP licensing., • Deep knowledge of patent analysis, technical due diligence, and litigation support in the semiconductor domain., • Ability to assess patent infringement risks, licensing opportunities, and IP monetization strategies. Consulting & Communication: • Strong client management and stakeholder engagement skills., • Ability to explain highly technical semiconductor concepts to non-technical professionals., • Proven experience advising executives, IP litigators, and corporate clients on semiconductor technology strategy., • Excellent written and verbal communication for technical reports and legal documents. Leadership & Problem-Solving: • Strategic thinker with a problem-solving mindset in high-stakes, time-sensitive projects., • Demonstrated ability to mentor and lead junior team members., • Self-starter with strong research and analytical skills to identify patent and business opportunities. Education & Experience • B.Tech/M.Tech in Computer Science, Electronics, Telecommunications, or Electrical Engineering from premier institutions., • 7+ years of experience in the semiconductor industry, with expertise in chip design, verification, semiconductor fabrication, and IP strategy., • Experience in R&D, product development, or IP consulting within semiconductor companies or law firms is a plus., • Familiarity with patent litigation, licensing, and IP strategy is highly desirable. Why you will love working for Lumenci: • Be Part of a Global Team: Joining Lumenci means joining a diverse and globally distributed team. You'll collaborate with talented individuals from different backgrounds and cultures, bringing unique perspectives to every project., • Growth and Development Opportunities: At Lumenci, we believe in recognizing and rewarding merit. We offer opportunities for merit-based promotions, allowing you to advance your career based on your performance, contributions, and dedication. We are committed to supporting your professional growth and development, providing the resources and mentorship needed to excel in your role and take on new challenges. Benefits & Total Rewards • Comprehensive Health & Well-being: We offer robust medical, dental, and vision insurance options that include significant company contributions toward employee premiums to support the health of our "Luminaries" and their families., • Retirement Strategy: Lumenci provides a 401(k) program with a competitive employer-matching contribution, enabling employees to build long-term financial security., • Performance-Based Incentives: Our total cash compensation includes a variable pay component designed to reward both individual achievements (KRAs) and overall company success., • Time Off & Leaves: We prioritize work-life harmony through a balanced leave policy that includes accrued Paid Time Off (PTO), designated company holidays, and additional "floating" holidays for personal or cultural significance., • Holistic Wellness Support: Beyond standard medical care, we provide dedicated Wellness Leave to address both physical health and emotional well-being, as well as paid leave for significant life events like bereavement and parental bonding., • Culture of Autonomy & Growth: Employees benefit from a flexible, remote-first work environment that favors autonomy and provides structured support for ongoing professional development and career advancement. Compensation & Pay Transparency, • The expected total annual compensation range for this role is $115,000–$155,000 USD, which may include base compensation and other eligible incentive components., • Actual compensation will depend on skills, experience, and work location. For candidates in jurisdictions that require pay range disclosures, Lumenci will provide a good‑faith compensation range for the candidate’s location as part of the job posting or during the interview process, consistent with applicable law.Salary History: In compliance with applicable laws, Lumenci does not request, require, or rely on an applicant’s prior salary history when determining a starting salary or during any part of the hiring process. Equal Opportunity Employer: Lumenci is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Accommodation: If you require a reasonable accommodation to complete this application or participate in the interview process, please let your recruiter know. Employment Relationship: Nothing in this job description creates or is intended to create a contract of employment for any specific period of time. Employment with Lumenci, if offered, is on an at-will basis and may be terminated by either the employee or Lumenci at any time, with or without cause and with or without notice, subject to applicable law. • Must be legally authorized to work in the United States without sponsorship.

Job Description Minimum of 5 years of experience in commercial AV. (Specifically for physical and permanent installs, ex. for Conference Rooms, Meeting Rooms, Classrooms, Digital Signage, etc.) PLEASE NOTE: No Live Events and Music/TV studio Technicians. Qualifications & Experience: • Cable installation (Cat5/6, audio, speaker, control, coax, etc.), • Cable termination (crimping, soldering, splicing), • Equipment installation (displays, projectors, video walls, cameras, microphones, speakers, etc.), • Hardware Infrastructure installation (junction boxes, conduits, kindorfs, etc.), • Equipment rack fabrication, • Knowledge of manufacturers such as Crestron, Extron, Biamp, QSC, Logitech, etc., • Proficiency in reading Construction, Architectural, and AV drawings/schematics., • Proficiency in AV quality control and AV system testing., • Computer proficiency., • Organized, professional, and with good communication skills. Job Responsibilities: • Install Audio-Visual Systems (equipment, cabling, etc.)., • Manage and organize job tasks, priorities, inventory, schedule, etc., • Communicate and write project reports., • AV system quality control and testing., • Find solutions to challenges and issues during a project installation., • Troubleshoot issues. Required Certifications: • OSHA 30 + SST Certified. Preferred Certifications: • CRESTRON Certified., • EXTRON Certified., • BIAMP Certified., • QSC Certified., • DANTE Certified., • AVIXA (Advanced training), • Others.

Job Description Position Summary We are seeking an experienced Sign Maker / Graphic Designer with a strong background in both sign design and sign production. The right candidate will be equally comfortable creating layouts for customer approval and producing finished signs in the shop. This is not a marketing or general graphic design role — all design experience must be directly related to signage. We’re looking for someone who not only has the technical skills, but who thrives on creativity, professionalism, and the fun of building impactful signage. If you’re ready to grow your career in the sign industry with a dynamic and respected team, we’d love to hear from you. Responsibilities • Design signage concepts and production files using Adobe Illustrator, Photoshop, and FlexiSIGN., • Prepare and produce signs using a wide range of substrates, vinyl, laminates, and adhesives., • Operate and maintain large-format printer, plotter, and laminator., • Apply digital prints and cut vinyl to rigid substrates and panels with precision., • Perform light installations such as applying vinyl to windows/doors and mounting dimensional letters on interior walls., • Ensure accuracy, quality, and on-time completion of multiple projects in a deadline-driven environment., • Maintain accurate job records and documentation., • Maintain a clean, organized, and safe production area., • Provide occasional front-end customer support (phone or in-person) with professionalism and product knowledge., • Continuously learn and adopt new technologies, tools, and techniques in sign design and manufacturing. Qualifications • Minimum 3–5 years of professional experience in sign making and sign-related design., • Proven hands-on expertise with FlexiSIGN, Adobe Illustrator, and Photoshop in sign design and production., • Strong knowledge of sign materials, substrates, vinyl, and fabrication techniques., • Experience with large-format printing, cutting, laminating, and finishing., • Solid understanding of color theory and color management., • Hands-on experience applying vinyl graphics and mounting dimensional signs., • Valid NJ driver’s license, clean driving record, and reliable personal vehicle for local travel to job sites (mileage reimbursed)., • Ability to work independently and as part of a team in a fast-paced environment., • Strong organizational, problem-solving, and multitasking skills. Benefits • Competitive compensation package., • Paid vacation and holidays., • Opportunities for career advancement. Salary Salary range as listed; higher compensation considered for outstanding experience and skills. Company DescriptionMajestic Signs (https://majesticsigns.net) is a full-service local sign company, offering end-to-end solutions from design and permitting to fabrication and installation. We are committed to quality, value, and exceptional service — and we take pride in helping clients bring their brands to life through impactful signage.Majestic Signs (https://majesticsigns.net) is a full-service local sign company, offering end-to-end solutions from design and permitting to fabrication and installation. We are committed to quality, value, and exceptional service — and we take pride in helping clients bring their brands to life through impactful signage.

Job Description Future Colossal is looking for freelance Experience Producers to support upcoming immersive installations, interactive experiences, and live event activations. We have immediate project needs, so current availability is prioritized, but we’re always happy to connect with any Producers interested in future freelance opportunities. Requirements Qualified applicants should have proven experience producing live events, experiential activations, software development, or physical/digital installations from planning through onsite execution. This role is best suited for someone who is highly organized, client-aware, and comfortable managing multiple moving parts. Ideal candidates should be able to step into a project quickly, understand creative and production needs, and collaborate confidently with creative, technical, fabrication, vendor, and production teams. Relevant experience should include one or more of the following: • Live event production, • Experiential / brand activation production, • Technical production coordination, • Fabrication project management, • Owner representation / onsite production oversight, • Client / account management Benefits This is a project-based contract position. Please submit your resume and cover letter (optional) for freelance position consideration. About Us: We are Future Colossal, an experiential innovation lab based in NYC and Atlanta. We explore and create new technologies, constantly innovating to build immersive spaces, both physical & virtual, that are memorable, playful, & interact with the viewer. On any given day we may be working on VR, AR, Mixed Reality, physical installations, or creating a new experience that doesnʼt fit any conventional norms. We display our installations throughout the world at brand events, digital out-of-home media, trade shows, technology events, festivals, live events, permanent installations, and museum/gallery exhibitions – and have clients across a wide variety of industries. We are fast-paced, constantly solving new challenges, and are always looking towards the future.

Job DescriptionSalary: $28.00 to $34.00 per hour DOE Join EverGreene Architectural Arts EverGreene Architectural Arts is seeking a focused and technically capable Production Designer to support the development of production-ready documentation within our studio environment. This role is responsible for translating finalized design direction into clear layouts, scaled drawings, and organized digital files that guide studio artists and field teams. The Production Designer plays a critical supporting role in ensuring that design intent is accurately documented and efficiently executed. For nearly 50 years, EverGreene has been a national leader in architectural restoration, conservation, and design - trusted to work on many of the most iconic and historically significant buildings in the United States. Our projects unite the worlds of art and construction, combining technical mastery with creative problem-solving to deliver outstanding results in complex, high-stakes environments. As a 100% employee-owned company, we dont just offer jobs - we offer the opportunity to build a meaningful career while preserving Americas architectural legacy and contributing to work that endures. Position Summary The Production Designer prepares detailed layouts, scaled drawings, and digital documentation based on direction from the Senior Designer and Principal Designer when applicable. This role focuses on accuracy, file organization, and production clarity. Production Designers are expected to work within allocated design hours and proactively communicate documentation questions or conflicts before work moves into studio fabrication. This role works collaboratively with design and project teams to translate approved design concepts into fully realized production materials. The position supports the development and refinement of decorative elements and ornamentincluding borders, stencils, ornamental plaster, murals, and furnishingsguided by historic precedent, architectural context, and client vision. A strong understanding of fabrication methods, materials, and installation processes is essential to ensure artistic intent is carried through every phase of production. Core Responsibilities • Prepare scaled drawings, elevations, and layout documents based on approved designs., • Develop production-ready digital files for printing, projection, cutting, or studio transfer., • Refine, vectorize, and texture hand-drawn or conceptual artwork into print-ready and cutter-ready formats., • Create spatial and colorized renderings using photography, architectural drawings, and 3D models to visualize design intent., • Organize and maintain digital project folders and file naming standards., • Coordinate closely with Senior Designers to ensure documentation reflects approved intent., • Incorporate redlines and revisions accurately and efficiently., • Make and verify measurements and proportions to produce accurate layouts, as-builts, and full-scale templates., • Assist with preparation of submittal packages, presentation materials, and client-facing deliverables., • Produce digital artwork on various substrates using studio equipment and ensure alignment with approved samples., • Ensure accurate color matching between production materials, swatches, and painted samples., • Track assigned hours against project allocations and communicate concerns early., • Support internal quality control by reviewing drawings for accuracy and completeness., • Collaborate with studio artists to clarify layout dimensions, sequencing, and transfer methods., • Assist in defining production workflows, sequencing phases of work, and organizing deliverables for efficient execution., • Prepare clear installation documentation and instructions for field teams., • Participate in project kickoff and internal coordination meetings when assigned., • Communicate with design teams, architects, and project stakeholders to clarify requirements and resolve documentation gaps. Career Path This position is project based (variable hour) with the potential for Full Time status. Production Designers develop strong technical documentation skills within the studio environment. With experience and demonstrated capability, this role may advance to Senior Designer, taking on greater design responsibility and mentorship of junior staff. Qualifications & Requirements • 3+ years of experience in design documentation, scenic production, architectural drafting, or related disciplines., • Formal training in architecture, fine arts, preservation, or related discipline (BA / BFA / BArch preferred)., • Strong proficiency in digital drawing and layout software (Adobe Photoshop and Illustrator preferred)., • High attention to detail and strong file organization skills., • Ability to interpret conceptual direction and translate it into precise documentation., • Understanding of scale, proportion, and decorative systems within architectural contexts., • Strong understanding of color theory and ability to evaluate subtle color differences., • Familiarity with fabrication methods, materials, and construction techniques., • Ability to manage multiple tasks while maintaining accuracy in a fast-paced environment., • Strong communication skills and willingness to ask clarifying questions., • Collaborative mindset with the ability to work both independently and as part of a team., • Passion for architecture, historic restoration, and decorative arts., • Must be able to work in-person within the studio environment. Preferred • Historic restoration experience, • Ability to draw or paint, • Familiarity with classical architecture and ornamental vocabulary Work Environment & Travel Expectations • This is an in-person, studio-based role requiring daily collaboration with design and production teams. Production Designers work closely with studio artists to ensure layouts and documentation align with fabrication and finish processes., • Most work is performed in a studio/office environment with extended periods at a computer, along with regular standing, walking, and occasional lifting., • Occasional travel to project sites may be required to support layout verification or assist during installation phases. The individual must be able to navigate active construction sites and comply with OSHA safety protocols, including proper use of PPE. Benefit Highlights • Medical, Dental & Vision plans, • 401k & Roth Retirement plans with company match, • Employee Stock Ownership Plan - ESOP, • Long Term Disability & Basic Life Insurance, • Paid Time Off & Paid Holidays Why Join EverGreene? • Work on landmark projects and iconic buildings nationwide, • Join a mission-driven, employee-owned company where your contributions matter, • Grow your career in a collaborative culture that values craftsmanship, quality, and innovation, • Help shape a lasting legacy of artistic excellence and technical mastery *NO RECRUITERS* At EverGreene, we foster a respectful, team-oriented culture rooted in craftsmanship and purpose. Join us to support impactful projects and build a career with long-term potential.

Job Description Position Title Rate of Pay Coordinator, Activity Development $50,000 – 53,000 Department Work Location Exhibit Experience On-site Reports to Work Schedule Director of Exhibit Experience and Operations Tues-Sat; 9 am-5 pm FLSA Status Position Classification Non-Exempt Full-Time, Regular About us: Since its founding at the 1964-65 New York World’s Fair, the New York Hall of Science (NYSCI) has inspired millions of people — children, teachers, and families — by offering innovative, participatory ways to learn and encouraging people to explore their curiosity and nurture their creativity. Located in Queens, the most ethnically diverse county in the country, NYSCI welcomes 400,000 visitors each year and serves thousands more through outreach in schools, teacher professional development, and participation in a variety of public events and research initiatives. NYSCI is a leader in the science museum field, recognized for its highly regarded exhibitions, programs, and products, all of which are informed by our inclusive, research-derived approach to STEM learning and engagement called Design, Make, Play. The defining characteristics of Design, Make, Play — open-ended exploration, imaginative learning, personal relevance, deep engagement, and delight — are the ingredients that invite broad participation in STEM and make engagement and learning irresistible. Through this transformative model for STEM exploration, NYSCI engages a broad community of learners in STEM by fostering the excitement of self-directed exploration and by tapping into the joy of learning intrinsic in young people’s play. NYSCI has approximately 105 full-time and over 135 part-time and casual staff members. POSITION OVERVIEW There is a range of exhibits that the Exhibits Department is responsible for– exhibitions like Small Discoveries and Powering the City that focus on discovery, curiosity, and problem solving, but largely function as standalone exhibits as long as they receive daily upkeep and replace loose parts. The Exhibits Department also oversees facilitated exhibit experiences like Design Lab, Preschool Place, Connected Worlds, and Makerspace. This role will focus on providing high-quality, STEM-based experiences for NYSCI’s facilitated exhibit spaces that promote visitor collaboration, agency, confidence, and competence through learning and play. The Activity Development Coordinator will have a dual role, focusing on daily exhibit operations and also holding responsibility for developing and iterating activities that elevate the experience in Design Lab and other facilitated exhibitions. They will collaborate with the Design Lab and Makerspace Coordinator to continue operationalizing the Design Lab and Makerspace so they are accessible and usable for both GA and group audiences. PRINCIPAL RESPONSIBILITIES Floor Operations of Exhibits: • Turn exhibitions on/off daily and as requested by staff, • Daily prep and reset of exhibitions, • Troubleshoot exhibits and replace broken or missing parts, • Upkeep of loose parts in exhibits, • Support the training of ELT, Exhibit Experience and Operations team, and Explainers in running activities in NYSCI’s exhibits. Activity Development and Iteration: • Develop new experiences for the facilitated exhibits at NYSCI to engage explainers and bring NYSCI’s mission to visitors of all ages., • Iterate existing and new activity ideas with feedback from Explainers and other members of the Exhibits team., • Develop and maintain instructional materials and digital content developed for facilitated exhibits., • Develop materials to share activities with other museums and learning communities., • Embed inclusive and accessible practices into existing and new activities., • Design and fabricate materials, working with Design, Development, and Fabrication teams when needed, to operationalize activities in NYSCI’s exhibit spaces., • Maintain budgets, reports, and statistics aligned with the development of offerings in facilitated exhibits. Support Facilitated Exhibit Operations • Support the operationalization of Design Lab activities and Makerspace programming, • Operationalize new, traveling, and pop-up exhibitions with the Exhibits Team, • Work with the Exhibits Team on exhibit translations/signage needs, • Participate in creative brainstorms/charrettes/prototyping, • Co-develop training materials for exhibit areas when necessary QUALIFICATIONS • B.A. or equivalent degree in design, learning pedagogy or education, arts, making, engineering, or other equivalent experience., • 2-5 years’ experience facilitating, running, or developing human-centered, mission-based offerings in a Science or Children’s Museum, or other experience in a hands-on learning environment., • Proficient in computer skills, including project management/scheduling software, spreadsheets, and email., • Experience with Creative Suite, Vectorworks, SketchUp, or CAD is a plus. REQUIREMENTS • One to three years’ experience developing, managing, and or facilitating creative hands-on activities., • Demonstrated experience and competence using hand tools, electronics, computer software/hardware, and other various technologies for students, educators, or families., • Bring a design-thinking perspective to activity development and exhibit operations., • Draw on strong communication skills to express ideas clearly in written, oral, and visual communications., • Demonstrable experience in working with teams, with the ability to harness team creativity and translate it into effective programming., • Ability to participate in events outside the workday schedule, and must be available to work evenings and weekends. PHYSICAL REQUIREMENTS • Able to use power tools, hand tools, and hardware., • Able to review design documents, AV files, and interactive exhibits., • Able to move materials and exhibit components weighing 50-100 lbs. SUPERVISORY RESPONSIBILITIES This position will include supervising Fellows or Residents (part-time, high school- and college-aged NYSCI employees) in specific exhibit areas such as Design Lab or Small Discoveries (biology), and coaching/supporting Explainers on the museum floor. PREFERRED QUALIFICATIONS Ability to speak, read, or write languages other than English is a plus. All exhibitions at NYSCI are bilingual in English and Spanish. COMPENSATION $50,000 -53,000, commensurate with education, skills, and experience; includes an excellent NYSCI benefits package. BENEFITS NYSCI strives to be an inclusive place to work. We work to foster multiple voices and perspectives, empower staff as problem solvers, and support professional growth for all. The New York Hall of Science also offers generous benefits and perks for all regular full-time employees. These currently include: • Health, dental, and vision insurance options, • Flexible spending accounts for healthcare, dependent care and commuter benefits, • Pension plan and 401k plan, • Free life insurance coverage, • Paid vacation and sick leave, • 13 paid holidays off, • Flexible work schedules, • Employee Assistance Program, • Free onsite parkingHOW TO APPLY Please upload your resume and cover letter through our online careers page. Please note that while careful consideration will be given to each submission, the Museum will contact only those applicants whose knowledge, skills, and work experience best fit the requirements of the position. Interview Process • Introductory Phone Interview, • Second-round Virtual Panel Interview, • Final Interview on-site at NYSCI Application Deadline: Ongoing until position is filled. No phone calls or faxes, please. The New York Hall of Science is an equal-opportunity employer committed to fostering an inclusive and innovative environment with the best employees. We provide employment opportunities without regard to age, race, color, ancestry, national origin, religion, disability, sex, gender identity or expression, sexual orientation, military service, marital status, or any other protected status in accordance with applicable law. We support a drug-free workplace. If there are preparations we can make to help ensure you have a comfortable and positive interview experience, please let us know. We recognize that it is highly unlikely that an applicant meets 100% of the qualifications for a given role. Therefore, if much of this job description describes you, then you are highly encouraged to apply for this role.

Job DescriptionSalary: $72,000-$110,000 Are you ready to embark on an extraordinary journey, where your purpose is to empower and uplift others through education? We're seeking a passionate and dedicated individual to become a Teacher at Integration Charter Schools (ICS) and play a pivotal role in our vibrant learning community! About ICS Integration Charter Schools provide innovative pathways to college that fully integrate students with special needs. In building a family of associated schools that share this common mission, ICS strives to fill gaps in public education. The ICS network is composed of four schools located on Staten Island, New York. The guiding principles of ICS are teamwork, courage, community and integrity. We take these principles into the classroom to enrich our students learning experience. In addition to a rigorous academic curriculum, our social-emotional learning program plays a key role in fostering resilience, self-awareness, and interpersonal skills, preparing students for success both in and out of the classroom. We offer opportunities for students to earn college credits through partnerships with higher education institutions, allowing them to gain valuable experience and accelerate their academic journey. At Integration Charter Schools, we are committed to creating innovative educational pathways that meet the diverse needs ofevery learner. Our dedicated team ofpassionate educators, skilled instructional staff,andsupportive professionalswork together to cultivate an inclusive, enriching learning environment for our entire school community. Overview Integration Charter Schools is looking for passionate and creative education professionals to join our teaching teams at each of our network of charter schools. Were excited about education professionals who are fired up about our inclusive program and commitment to serve all students of Staten Island. Join us as we foster social and emotional wellness, encourage inclusive learning, and guide students to find their unique learning paths. As a Graphic Design Teacher at ICS, you will play a crucial role in creating inclusive pathways to academic and social-emotional success for all types of learners in the classroom. You will work collaboratively with students, families, and colleagues to provide a supportive and enriching learning environment. Responsibilities Instruction and Preparation • Craft and deliver captivating lessons that engage and energize students across various subjects, enriching their educational journey, • Addressing the learning needs of all learners in your classroom, • Plan instruction that creates independent learning opportunities for students, • Present a passion for learning, growth mindset and a love for the subject matter you are teaching, • Deliver high quality content in the assigned content area integrating Social Emotional instructional practices, • Tailor teaching methods to meet the unique learning needs of every student, ensuring no one is left behind on their educational journey, • Lead by example, demonstrating your passion for learning and instilling it in our students, nurturing their growth and development, • Design and deliver a comprehensive Graphic Design and Digital Arts curriculum, including digital illustration, branding, visual communication, and multimedia design, • Develop and teach 3D design and fabrication units, including modeling, slicing, and production using 3D printers, • Provide students with hands-on opportunities to engage in design thinking, prototyping, and iterative problem-solving, • Integrate industry-standard tools (e.g., Adobe Creative Suite, Tinkercad, Blender, Canva, or similar platforms) into daily instruction, • Plan and implement projects that connect art, technology, and real-world applications (marketing, product design, architecture, etc.), • Teach foundational and advanced skills in digital citizenship, AI use in design, and ethical creative practices, • Differentiate instruction to support a range of learners, including students new to digital tools and those ready for advanced design challenges Relationship Building and Student Support • Create a predictable, physically, emotionally and intellectually safe learning environment for all stakeholders (students, family members, teachers and staff)., • Make space for student voice and choice, • Use the principles of ICS to manage conflicts and redirect undesired behavior, • Manage student behaviors and use mistakes as learning opportunities, • Hold a high bar for effort, persistence and quality of work, • Celebrate progress and recognize student achievement, • Foster a creative studio environment that encourages risk-taking, critique, collaboration, and student voice, • Provide structured opportunities for peer critique and feedback cycles to strengthen student work and communication skills Community Engagement • Create positive relationships by showing care and trust with families, • Provide weekly communication touch points for families when needed, • Provide families with the tools and tips that they can work on and support their students at home, • Embrace and celebrate diversity, creating an inclusive classroom environment that reflects the dynamic nature of our community, • Showcase student work through digital portfolios, exhibitions, showcases, or school-wide displays, • Build partnerships (when possible) that expose students to careers in design, technology, and creative industries Professional Responsibilities • Commit to being reflective and responsive to feedback that will impact your practice, • Participate in school and network wide professional development opportunities, • including but not limited to, mentorship, coaching cycles, observation, • and feedback rounds, • Constantly reflect on your practice, content knowledge and pedagogical skill, • Maintain accurate records for grading, progress monitoring and communication., • Collaborate with colleagues and invest in yourself as an adult learner, • Supporting the school as directed by the Principal, Assistant Principal and Dean, • Create and champion an inclusive environment where students are valued; fostering a sense of belonging within our vibrant educational community, • Lead by example, demonstrating your passion for learning and instilling it in our students, nurturing their growth and development, • Manage and maintain a 3D Arts and Design Lab, including 3D printers and related equipment, • Ensure proper setup, calibration, troubleshooting, and safe operation of 3D printing technology, • Maintain inventory of materials (filament, tools, supplies) and establish systems for efficient lab usage, • Stay current with emerging trends in digital design, 3D fabrication, and educational technology, • Support integration of design and technology across content areas through collaboration with colleagues, • Lead or support extracurricular opportunities such as design clubs, robotics, or innovation-based programs Additional Information • Weekly Wednesday half- day schedule for embedded professional development and planning, • Small class sizes, • Tuition reimbursement, • Teaching certification pathway for those who qualify, • Opportunity to be an integral part of our community, making a genuine difference and shaping the futures of our students, • Students of ICS employees have access to after-care options, • Free parking on-campus, • Comprehensive benefits package that includes health, dental, vision and life insurance, a flexible spending account, paid time off, short- and long-term disability policy, commuter benefits, professional development opportunities and a 401(k)-retirement plan with an employer match of up to 3%, • Employees qualify for both NYS Teacher Loan Forgiveness and Public Service Loan Forgiveness, • Promotion of work-life balance to all staff members, • Stipend program that promotes becoming a dual certified teacher in New York State, • Teacher Residency Program, • Tuition-free Bachelors degree program through Monroe College Qualifications & Competencies • A Bachelor's degree in Education or Masters degree in a relevant field, • Ability to become certified in the state of New York and pass the state licensure exam if not already a certified teacher!, • Exhibit patience, empathy, and the ability to motivate students toward their full potential, • Experience teaching graphic design in a school setting, • Possess exceptional communication skills, empowering you to convey complex ideas in relatable terms, • Collaborative attitude toward teaching and learning, • A whatever it takes attitude, one that is centered in the notion of children first, • Belief in every students limitless potential, • Embrace and celebrate diversity, creating an inclusive classroom environment that reflects the dynamic nature of our community Salary/Hours Monday-Friday 7:30AM-4:00PM $72,000-$110,000 *Salary is dependent on level of education and years of teaching experience ICS is an Equal Opportunity Employer

About NORY: At NORY, we design learning journeys where every child in NYC and Boston becomes a risk-taking entrepreneur, inquisitive problem solver, and empathetic leader. As the largest STEM camp provider in NYC with 3000+ campers annually, we are the Disney World of STEM education, where each learning experience is magical, impactful, and memorable. Dive into our world at: , and watch this video: The Role: Are you a maker educator driven by a passion for creative hands-on engineering, design-thinking process, and mechatronics? Do you find joy in designing learning experiences that inspire young minds? If you’re continually pondering the best ways to nurture Generation Alpha and eager to be at the forefront of such efforts, you might be the ideal candidate for our Maker Education Curriculum Developer (STEM for Age 3-12) role. Your Canvas: Engineering & Digital Fabrication: Design hands-on projects that ignite resilience, inquisitiveness, and empathy in children. Interdisciplinary Learning: Showcase your intellectual curiosity by weaving multiple learning points into a seamless, interdisciplinary experience. Storytelling & Experience Creation: Create thematic worlds as immersive as a Disney World ride. We need that level of storytelling prowess. Communication: Empower teachers across all NORY campuses to deliver your vision consistently, using your multi-channel communication skills – especially video. Child Development Insight: Apply your experience with children aged 3-12 to understand their developmental stages and interests. Teacher Empathy: Train and coach teachers to become the rock stars of our campsites. Coding Knowledge (Plus): Your coding skills are a bonus, particularly for empowering older children to create advanced robotic projects. Application Requirements: Impress us with a visual portfolio of your maker projects. We're excited to see your work in woodworking, 3D printing, laser cutting, crafts, basic electronics (circuits, motors), Arduino, computing controllers and platforms (Raspberry Pi, Microbits), and coding tools like Scratch. The purpose behind your inventions in your portfolio is key. Why This Role Rocks: You'll grow with a rapidly expanding company at the forefront of nurturing Generation Alpha. Develop the most effective ways to inspire the next changemakers. Co-build a hub for visionary educators whose work will influence hundreds of teachers and thousands of campers every summer. Join Our Vision: We're searching for maker educators who are not just skilled and passionate but also align deeply with our core values. At NORY, our 'Ways of Being' guide everything we do: We are purposeful in our actions, always asking "why" to cultivate inner motivation. We ask "how to make it work" before wondering "if it will be possible." Our decisions are grounded in data and logic. We are accountable and disciplined. We actively seek feedback, embracing different perspectives and effective methods that contribute to our growth. We avoid superficial solutions, opting instead to thoroughly analyze problems to create sustainable, scalable responses. We are unifiers, fostering a loving and caring team environment that deeply values empathy and compassion. These aren't just words; they're the essence of our DNA. If these values speak to you, see how you align with our complete 'Ways of Being' at _ Compensation and Benefits: Salary: $70,000 - $90,000/year Benefits: 401K, Health and Dental, Paid Time Off Ready to Make a Difference? If shaping the best STEM learning experience for our future changemakers excites you, we can't wait to meet you. Please send your portfolio, resume and a note explaining why you're the perfect fit for this role to peter@nory.co NORY, Inc. is an equal opportunity employer, committed to a diverse, inclusive, and compassionate team.

Forward Deployed Engineer - Oil, Gas & Chemicals Travel: ≤70% Location: Remote USA, CA or TX preferred The Opportunity: Picarro's Fenceline Monitoring Solution delivers continuous, real-time emissions intelligence to refineries and chemical plants. The technology works. The harder challenge — and the one that determines whether a pilot becomes a long-term program — is the early engagement: ensuring that Environmental, HSSE, and Operations teams understand the data in front of them, integrate it into how they work, and begin to operate differently because of it. That is the work of the Forward Deployed Engineer. The FDE is embedded at customer sites during pilots and early-stage engagements. This role sets the benchmark for how Picarro unlocks value — changing the way operators and HSSE practitioners engage with real-time emissions data, moving from passive, retrospective review toward active, real-time decision-making. Success means customers take faster action on the signals that matter, reduce emissions, reduce risk, and build a more operationally excellent emissions management practice — with PicarroLink at the center of how they work. WHO WE ARE LOOKING FOR You are energized by change — specifically, by the challenge of shifting how an industry operates. You are not here to maintain the status quo or run a passive playbook. You walk into a refinery control room or HSSE office, earn trust quickly, and get people working differently. That is what drives you. You are comfortable with emissions management technology. You understand emissions monitoring — detection, attribution, LDAR, real-time data and can speak credibly with the people using it. You are practical and hands-on in nature, and you are comfortable navigating a refinery or chemicals facility – e.g., by driving a survey vehicle, running real-time analytics in the field. You are energized by leading on the software side: Demonstrating how real-time emissions data and analytics fits into daily workflows, coaching teams through the shift from scheduled reporting to real-time signal-driven decision-making and making digital a natural part of how Environmental and Operations teams work. You bring energy to that. You make it feel achievable, not foreign. You collaborate naturally with Customer Success and Product teams, because you recognize that your customer-facing observations are among the highest-quality inputs those functions receive. You translate adoption gaps into actionable product feedback, and you work with Customer Success to ensure that what gets tracked and built reflects real-world operational needs. You hold yourself accountable to customer outcomes — not to task completion. You are also motivated by building something. The adoption models, training approaches, and workflow integration playbooks being developed right now will define how Picarro delivers at scale. The person in this role will shape them. If that sounds like the work you have been looking for, we want to talk. DUTIES The Forward Deployed Engineer – Oil, Gas & Chemicals is responsible for driving adoption, enablement, and value realization at customer sites during pilots and early-stage engagements. Working with one customer at a time, the FDE ensures that Picarro's Fenceline Monitoring Solution and PicarroLink platform are embedded into Environmental, HSSE, and Operations workflows as an active, real-time tool — not a passive data archive. Delivery, commissioning, and hardware support are handled by Picarro's Operations and Delivery function; the FDE collaborates with that team but is focused entirely on the adoption and enablement work that determines whether a customer changes how they operate. Success is measured by the depth and consistency of customer adoption, the quality of value realized during the engagement, and the insights fed back to Customer Success and Product. DUTIES INCLUDE • Pre-sales and pilot engagement: Participate in pre-sales conversations, technical working sessions, and pilot design — bringing operational credibility to discussions about how PicarroLink integrates into a customer's existing workflows, data environment, and compliance obligations. Help define what success looks like and how it will be measured., • Ongoing engagement with HSSE and Operations workers and leaders to build early alignment on objectives, establish relationships that support access and credibility during deployment, and ensure that pilot design reflects real operational constraints., • User onboarding and training: Design and deliver structured, hands-on onboarding for Environmental, HSSE, and Operations personnel. Build confidence in PicarroLink — alerts, dashboards, event interpretation, and daily data review. Develop site-specific superusers who can train and sustain adoption across shifts and personnel changes, reducing dependency on Picarro's presence over time., • Workflow integration — detect, attribute, resolve: Coach customer teams through the full real-time emissions management workflow: detecting concentration events, interpreting back-trajectory attribution, correlating mobile survey data with fenceline signals, and executing documented resolution. Drive this cycle into existing daily operational procedures and compliance practice shifting customers from reactive, schedule-driven programs to proactive, signal-driven operations., • Picarro Link adoption and digital leadership: Own the goal of consistent, meaningful daily use of PicarroLink across Environmental and Operations functions. Lead on the software side — configuring detection thresholds, alerts, and dashboards in collaboration with the customer team; demonstrating and embedding digital ways of working as the new operational standard. Make the shift to real-time feel natural and inevitable., • Mobile survey enablement: Train customer personnel to operate the Mobile Survey Unit (UTV) for rapid fence-to-source investigation. Coach the use of meteorological and back-trajectory data to support defensible differentiation of on-site from offsite contributions. Build customer capability to run targeted field investigations independently., • Customer Success alignment and joint governance: Work closely with the assigned Customer Success Manager to maintain a real-time view of adoption health, workflow integration status, and value realization. Contribute to Quarterly Business Reviews, success criteria tracking, and customer health reporting. Ensure Customer Success has the ground-level insight needed to manage the account effectively., • Product feedback and customer-centric solution input: Translate direct field observations — workflow gaps, usability friction, unmet customer needs — into structured, actionable product feedback. Serve as a primary Voice of Customer input to the Product Owner and Industry Solution Director. Identify patterns across engagements that should drive roadmap prioritization, UX improvement, or new use case development. Partner with Product to ensure what gets built reflects how customers actually work., • Adoption playbook development: Contribute to repeatable onboarding, training, and workflow integration playbooks that scale the FDE model as Picarro grows. Use AI tooling to document field learnings, structure templates, and accelerate knowledge transfer across engagements., • Compliance context awareness: Maintain a working understanding of each customer's regulatory obligations — Refinery MACT, HON Rule, SSMP, and relevant fenceline action level frameworks — to ensure that PicarroLink configurations, workflow integrations, and reporting outputs align with compliance requirements and defensibility standards. QUALIFICATIONS • Bachelor's degree in engineering, environmental science, chemistry, industrial operations, or a related field., • 5+ years of experience in industrial or field-based roles spanning emissions monitoring, environmental programs, industrial operations, or digital solution deployment — including meaningful experience leading on the software and digital side: training teams on platforms, driving adoption of data-driven tools, and embedding digital workflows into operational practice. This is not a hardware role; fluency with software-enabled ways of working is essential., • Comfort working with real-time monitoring technology: familiarity with continuous emissions monitoring concepts — detection, attribution, LDAR, fenceline monitoring, VOC measurement — at a level sufficient to speak credibly with HSSE and Environmental practitioners. Understanding of how real-time data differs from passive or batch-based programs is important; depth in specific instrumentation is a plus but not the primary requirement., • Demonstrated training and enablement experience: proven ability to deliver structured onboarding and hands-on training to technical and operational audiences; track record of building user confidence and sustaining adoption across diverse facility workforces and shift-based environments., • Industrial site fluency: comfortable operating on refinery and chemical plant sites, navigating site safety requirements, work permits, and the cultural expectations of major industrial operators. At ease with Environmental, HSSE, and Operations stakeholders across all levels., • Working knowledge of industrial data environments: familiarity with process control environments — DCS, PLCs, MODBUS, or equivalent — is extremely helpful for understanding the operational context in which PicarroLink sits and for credible conversations with plant technical teams., • Strong interpersonal and communication skills: able to build trust rapidly with frontline operators and HSSE/Environmental leadership alike; effective at translating technical data into operational decisions; capable of influencing workflow change without authority., • Motivated by industry change: genuinely energized by the challenge of shifting how the industry operates — not by maintaining existing practices. Drawn to making real-time, data-driven emissions management the new standard, and willing to do the patient, consistent work that organizational change requires., • AI tooling aptitude: comfortable incorporating AI tools into daily work to improve documentation quality, structure feedback, and accelerate playbook development., • Ability to travel approximately 70% of the time to our headquarters in Santa Clara, CA. The company reserves the right to require random drug testing for all applicable positions. The base salary range for this full-time position is $100-150k annually. Your base salary and title will be determined based on the location, experience, qualifications, skills, knowledge, level, and pay of employees in similar positions. • Medical, Dental, and Vision insurance, • Flexible Spending Account (FSA) and Health Savings Account (HSA) plans, • Life, Short-Term Disability, and Long-Term Disability Insurance, • Flexible Vacation Policy and Paid Holidays, • Employee Referral Program, • 401K, • Social events (summer picnic, holiday party, team lunches, etc.), • On-site Health & Wellness programs (fitness challenges, outdoor boot camp, flu shots, etc.) About Picarro: We are the world's leader in timely, trusted, and actionable data using enhanced optical spectroscopy. Our solutions are used in various applications, including natural gas leak detection, ethylene oxide emissions monitoring, semiconductor fabrication, pharmaceutical, petrochemical, atmospheric science, air quality, greenhouse gas measurements, food safety, hydrology, ecology, and more. Our software and hardware are designed and manufactured in Santa Clara, California. They are used in over 90 countries worldwide based on over 65 patents related to cavity ring-down spectroscopy (CRDS) technology. They are unparalleled in their precision, ease of use, and reliability. At Picarro, we are committed to fostering a diverse and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, national origin, protected veteran status, gender identity, social orientation, or disability. Posted positions are not open to third-party recruiters/agencies, and unsolicited resume submissions will be considered free referrals. At Picarro, we strive to ensure that all individuals, regardless of their abilities, have equal opportunities. If you are an individual with a disability and require reasonable accommodation to complete any part of the application process or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, please contact Picarro, Inc. at _ for assistance.

JOB TITLE: Wood Shop Specialist JOB POSTED: July 22, 2025 DEPARTMENT: Visible Futures Lab (VFL) REPORTS TO: Director, Visible Futures Lab SCHEDULE: This position is 35 hours per week. Standard shifts are Monday–Friday from either 10:00 AM–6:00 PM or 2:00 PM–10:00 PM, and 12:00 PM–8:00 PM on weekends. Some evening and weekend shifts are required. Specific hours will be set each semester. COMPENSATION: $60,000 annually FLSA STATUS: Full-time, Non-Exempt POSITION SUMMARY: Under the direction of the Director, the Wood Shop Specialist supports the daily operations, safety, and instructional goals of the Visible Futures Lab (VFL). This role involves maintaining equipment, advising users on best practices, and assisting with training, orientation, and events in the VFL. The Wood Shop Specialist plays a key role in ensuring the VFL is a productive, safe, and inclusive environment for students, faculty, and staff. The VFL is dedicated to providing SVA MFA students with the tools and support necessary to fabricate work across a broad range of methods and materials. Consisting of a makerspace, workshop and digital fabrication facilities, the VFL's tool inventory ranges from traditional hand tools and workshop machinery to advanced 3D printers, laser cutters, CNC routers, and 2D printers for a variety of substrates and applications. The VFL supports artists and designers in varied areas of professional study to explore the boundaries of contemporary art & design craft work that advances real change. More information can be found here: _. DUTIES AND RESPONSIBILITIES Administrative Duties: • Open, close, and maintain the VFL shop during operating hours., • Provide guidance on shop workflows, policies, and equipment usage procedures., • Track and maintain inventory of woodshop materials, hand tools, and fabrication equipment., • Assist the Director in onboarding and training staff members and student workers in manual woodshop fabrication techniques., • Research, test, and evaluate new equipment, sharing findings with staff and assisting in related training., • Support student orientations, training sessions, workshops, special events, and exhibitions by preparing materials and leading relevant sessions., • Contribute to the development of content for social media and other digital communications platforms., • Assist with managing the shop’s scheduling and appointment system., • Advise on materials planning and help forecast needs to support facility development and resource management. Technical Duties: • Perform routine maintenance and upkeep of fabrication facilities, ensuring all equipment and workstations remain functional and safe., • Organize, store, and maintain all woodshop hand tools, power tools, and related equipment., • Enforce safety protocols by maintaining clean workspaces, verifying approved materials, and ensuring proper tool usage., • Design and build prototypes or samples that demonstrate shop capabilities and fabrication techniques., • Supervise and support students, staff, and faculty in following VFL safety guidelines and equipment usage procedures., • Provide hands-on instruction in software and hardware used to operate fabrication tools and equipment., • Introduce users to a range of fabrication tools, including:, • Standard hand tools and hand-held power tools, • Woodshop machinery (e.g., table saw, band saw, miter saw, drill press, sanders), • Shopbot CNC router, • Operate and train users on digital fabrication tools such as:, • CNC machines, • 3D printers and scanners, • Laser cutters, • Candidates with a strong background in traditional woodshop skills will receive training in digital fabrication as needed., • Provide general support for miscellaneous tasks and assist in shop operations as necessary., • Perform other job-related duties as assigned. MINIMUM QUALIFICATIONS • Bachelor's degree in areas such as Art, Design, technology-based fields, or a related discipline., • A minimum of 6 years of experience with woodshop fabrication tools., • Demonstrated proficiency with and passion for hand woodworking., • Demonstrated proficiency with basic carpentry and cabinet making., • Demonstrated fastidiousness with shop organization and cleaning., • Strong proficiency with Adobe Photoshop and Illustrator. PREFERRED QUALIFICATIONS • Some experience with model shop materials such as foam and acrylic., • Some experience with or a willingness to learn 3D modeling software applications, CNC milling, digital fabrication tools such as 3D printing and laser cutting., • Teaching experience and/or interest in teaching courses in area of expertise required. KNOWLEDGE, SKILLS AND ABILITIES • A passion for learning digital and hands-on fabrication techniques., • Knowledge of assigned practices and procedures., • Knowledge of safety practices and procedures., • Commitment to providing exceptional customer service to students, faculty, and staff., • Clear and professional verbal, written, and email communication skills; able to communicate effectively across diverse personalities., • Strong organizational and time-management skills., • Ability to operate and maintain an array of shop tools., • Ability to learn new technology and workflows in a fast-paced environment., • Ability to troubleshoot AV equipment and identify solutions to technical issues., • Ability to identify and mitigate safety risks., • Ability to train others., • Ability to develop and maintain knowledge in assigned specialized areas., • Ability to resolve problems or situations requiring the exercise of good judgment., • Ability to interact with all levels of administrative staff, faculty, students, visitors, and prospective students. PHYSICAL REQUIREMENTS OR WORKING CONDITIONS • This position is 35 hours per week. Standard shifts are Monday–Friday from either 10:00 AM–6:00 PM or 2:00 PM–10:00 PM, and 12:00 PM–8:00 PM on weekends. Some evening and weekend shifts are required. Specific hours will be set each semester., • This is a fully onsite position, requiring in-person attendance at our designated work location. Remote work is not permitted for this role., • Visible Futures Lab operational hours:, • Monday to Thursday, 10:00 am - 10:00 pm, • Friday, 10:00 am - 6:00 pm, • Saturday to Sunday, 12:00 - 8:00 pm, • Ability to perform physical tasks, such as standing for long periods of time, walking, lifting, and carrying items up to 20 lbs., • Exposure to large equipment and fabrication tools (standard hand/power/woodshop tools), requiring adherence to safety protocols. APPLICATION INSTRUCTIONS To be considered for this position, candidates must submit the following: • Resume, • Cover Letter, • Portfolio or sample images demonstrating an ability to create working, complex, and diversified fabrication projects. WORKING AT SVA School of Visual Arts has been a leader in the education of artists, designers, and creative professionals for more than seven decades. With a faculty of distinguished working professionals, a dynamic curriculum, and an emphasis on critical thinking, SVA is a catalyst for innovation and social responsibility. Comprising over 7,000 students at its Manhattan campus and over 41,000 alumni from 128 countries, SVA also represents one of the most influential artistic communities in the world. For more information about the College's 31 undergraduate and graduate degree programs and Continuing Education division, visit sva.edu. Learn more about_. The School of Visual Arts is an equal-opportunity employer. Diversity and inclusion is a core principle of the College. SVA enjoys a community that represents a significant number of historically underrepresented communities, ethnic and religious backgrounds, gender identities, diverse abilities, and foreign countries, and all are encouraged to apply.

Job Description New Castle Metal is a premier local fabricator of exterior architectural metals for Commercial, Industrial, and Residential projects. We specialize in standing seam metal roofing systems, perimeter and edge metal systems, and custom fabrication. New Castle Metal utilizes a portfolio of brakes, shears, punches, and roll formers at each of its six locations across the North East to provide customers with unparalleled flexibility and lead times. Position Summary As a Field Service Technician for New Castle Metal, you are the backbone of our equipment reliability and operator competence. Reporting directly to the Director of Operations, you will execute a rotating schedule to service our six manufacturing facilities, spanning from Norwalk, CT to Baltimore, MD. This highly dynamic role requires nearly 80% travel and a solid foundation in industrial machinery repair. In addition to maintenance and repair, you will act as a primary technical instructor. You will be responsible for onboarding new operators and continuously upskilling existing team members, ensuring they know how to properly set up, run, and maintain our specialized fabrication equipment. You will also track your maintenance and training work in our CMMS, and provide a high volume of guided troubleshooting via telephone or virtual meetings. Responsibilities • Preventative & Reactive Maintenance: Execute preventative maintenance schedules across all six NCM fabrication sites and perform emergency reactive repairs on mechanical, electrical, hydraulic, and pneumatic systems., • Equipment Mastery: Work on core manufacturing assets, including SSQ and New Tech Metal roll formers, Cidan folding brakes and shears, Trumpf punches, and other automated fabrication machinery., • Operator Training & Instruction: Execute hands-on training for both new and existing local site operators. Instruct them on standard operating procedures, machinery setup, material handling, and advanced operation of SSQ machines, folders, brakes, and shears., • Equipment Care & Safety: Teach operators basic troubleshooting, daily preventative maintenance checklists, and strict adherence to safe machine operation guidelines., • Data & Asset Tracking: Utilize MaintainX CMMS via mobile/tablet to log all maintenance activities, training sessions completed, parts used, machine downtime, and inspection notes., • Inventory & Support: Track parts inventory across sites, communicate part replacement needs proactively , and act as the primary technical resource for site managers regarding equipment performance, operator efficiency, and production optimization., • Travel: Manage a fluid travel schedule to ensure consistent maintenance and training coverage across all six regional facilities, remaining comfortable with extensive travel and driving between sites. Qualifications & Skills • Technical Experience: Proven experience maintaining, troubleshooting, and repairing manufacturing equipment , with a strong baseline competency in electrical, hydraulic, and pneumatic systems. (Specific machinery training will be provided) ., • Instructional Skills: Demonstrated ability or strong aptitude to teach, mentor, and train others. Experience creating an instructional environment for new hires and seasoned operators alike is highly preferred., • Equipment Familiarity: Familiarity with sheet metal fabrication machinery—specifically SSQ roll formers, folders, brakes, and shears—is a major plus., • Digital Tools: Experience with CMMS platforms (MaintainX a plus)., • Communication: Strong interpersonal skills to effectively train local machine operators, guide remote troubleshooting, and clearly report machinery health to management., • Travel & Licensing: Ability and willingness to travel nearly 80% of the time to support our regional footprint. Must possess a valid driver’s license and a clean driving record. Benefits • Monthly Car Allowance Program, • Gas and Toll Compensation, • Paid vacation and holidays, • 401(k) with discretionary employer match, • Comprehensive Benefits: Medical, Dental, Vision, and Life Insurance Wage Range: $30 - 40/hour. In compliance with applicable law, this range is a good faith estimate based on potential employee qualifications, operational needs and other considerations permitted by law. Powered by JazzHR 8OQ9lApsvS

Job Description ON BOARD EXPERIENTIAL MARKETING On Board Experiential (OBE) is an award-winning, full-service, experience-led agency that creates meaningful brand experiences worldwide. We work out of our homes and physical offices in San Francisco, Los Angeles, and NYC, or wherever our adventures take us! Our clients include Nike, Meta, JPMorgan Chase, The Infatuation, Stripe, and OpenAI, to name a few. We know, "Cool, cool, but what's it like to work at OBE?" We thought you'd never ask. Event Marketer has recognized OBE as one of the best places to work in events and well, we couldn't agree more. The most important part of our business is our people. They are hardworking, brave and make magic happen on the regular. But under each majestic exterior is a human deserving of a healthy work-life balance. That's why we believe in recovery days, happy hours, friendly but competitive fitness challenges and company offsites. We conduct open meetings to facilitate discussions that heal, inspire, and bring us closer. We encourage each other to bring our whole selves to work. We want to hear about your lived experiences and unique perspectives. We don't just want you to be unapologetically you: it's part of the job description. We are considering candidates for any of our office locations: New York, San Francisco (Mill Valley), and Los Angeles. SUMMARY OF POSITION The Vice President, Design is a senior creative leader responsible for elevating OBE's design excellence, shepherding all design disciplines, and overseeing the development and delivery of world-class experiential, spatial, and integrated design work. Reporting directly to the Chief Creative Officer, the Vice President, Design leads a multidisciplinary team of designers, including 3D/environmental specialists, graphic and UX/UI designers, and visual storytellers to craft immersive, culturally relevant brand experiences that compete at the level of top design agencies. As both a visionary and operational leader, this individual ensures the design function is both innovative and strategically grounded. They bring deep expertise in environmental + 3D design, creative technology and interactive experience integration, and design execution (including fabrication, technical requirements, compliance best practices, etc.). They also have a proven ability to lead large, high-performing creative teams, and an extensive network of freelance and specialist talent nationwide. The Vice President, Design strengthens our design brand, inspires creative ambition across the organization, and ensures every project reflects extraordinary craft, clarity, and cultural insight. ESSENTIAL JOB FUNCTIONS Design Leadership & Strategic Direction • Lead the overall vision, quality, and execution of OBE's Design function, overseeing outputs across integrated design disciplines (spatial/environmental, graphic, interactive, digital, etc.), • Ignite imagination and push design limits by delivering and inspiring best-in-class experiential design., • Champion innovation, pushing design boundaries while maintaining brand integrity and strategic alignment., • Set and implement short- and long-term design goals aligned with agency growth and CCO's creative strategy., • Proactively track and apply design trends + thinking to maintain a cutting-edge, future-focused creative offering for OBE., • Oversee conceptual and visual direction for high-profile projects, ensuring all design work meets the highest standards of craft and creativity., • Lead select client projects, gaining client trust, selling in industry-defining design, and translating client objectives into strategic design solutions that elevate brand impact. Team Management & Department Leadership • Lead, mentor, and/or manage a design team of 10+ designers—fostering a culture of excellence, accountability, curiosity, and growth., • Articulate clear career paths and provide development plans plus ongoing feedback to strengthen team capability, growth, and morale., • Work with CCO and Creative Leadership to drive and develop department programming, including content for Creative Department Meetings and/or Design-specific trainings., • Contribute to hiring strategy and talent acquisition, helping attract top-tier design talent to OBE., • Expand, maintain, and grow OBE's bench of freelance and specialty designers; work with Creative Operations to activate this network quickly as needed for project demands. Cross-Functional Collaboration • Partner closely with Creative Directors, Strategy, Production, Technology and Account teams to ensure design thinking is fully integrated across all phases of work. Partner closely with Creative Directors, Strategy, Production, Technology and Account teams to ensure design thinking is fully integrated across all phases of client work., • Guide internal and client teams through all stages of design—from initials sketches and mood boards to final renderings and presentations to execution drawings and site maps., • Participate in leadership discussions, offering perspective on design innovation, creative process, and organizational growth., • Collaborate with Production to realize ambitious design concepts, maintaining design integrity from concept through execution., • Develop, direct and inspire compelling design concepts to win new business, including provocative pitch materials, resonant visuals, and clear executive presentations. Design Execution & Experiential Innovation • Ensure design concepts integrate cultural insight, user experience, visual storytelling, and technical feasibility., • Leverage deep understanding of brand experiences, environmental branding, creative technology and design execution to vet and integrate top vendors in partnership with Production., • Leverage expertise to balance creative ambition with practical feasibility, fostering an agile mindset across teams to deliver bold design on time and on budget., • Elevate and evolve design execution through quality assurance and control (materials evaluation, fabrication process audit, etc.), inspiring executional excellence and ensuring accuracy, craftsmanship, and on-brief delivery., • Oversee and/or lead on-site installation to maintain design excellence through delivery. Operational Excellence • Develop and refine design workflows, templates, tools, and standards to improve quality, efficiency, and cross-team collaboration., • Work with 2D design team lead to oversee software, hardware, and platform needs for the design team; advocate for new tools that strengthen creative output., • Review project budgets, timelines, hours assessments and SOWs to ensure design scopes appropriately outlined and budgeted, setting teams up for operational excellence and profitability., • As part of Creative Leadership, oversee team resourcing, staffing, and utilization, ensuring optimal balance of talent, workload, and quality. DESIRED SKILLS AND EXPERIENCE Education/Experience • 10+ years of design experience in experiential, environmental, architectural, or multidisciplinary creative roles., • 4+ years leading design / creative teams or running a design function within an agency, event production company or creative studio., • Proven experience managing a team designers / creatives or successfully running an agency/design studio., • A portfolio demonstrating exceptional experiential design work, architectural / 3D design expertise, integrated strategic thinking, compelling spatial storytelling and environmental branding, and thoughtful technology integration., • Bachelor's or Master's degree in Architecture, Design, Environmental Design, Creative Direction, or related field (or equivalent professional experience). Essential Knowledge, Skills, and Abilities • Mastery across key design disciplines including spatial/environmental design, 3D and architectural conception, experiential design, and visual storytelling., • Expertise in 3D design with advanced proficiency in modeling and rendering software (e.g. SketchUp, Rhino, Vray, Unreal Engine) and Adobe Creative Suite., • Passion for and familiarity with interactive experience design and implementation., • Strong understanding of fabrication processes, materials, production workflows, and feasibility considerations for brand experiences., • Ability to synthesize complex client needs into strategic, actionable design directions., • Exceptional communication and presentation skills, including the ability to persuade, inspire, and guide both internal teams and clients., • Skilled at managing multiple priorities in a fast-paced, creatively demanding environment., • Deep network of freelance creative resources, including 2D & 3D designers, production artists, CAD designers, creative technologists, content creators, lighting designers, art directors and stylists. Other Qualities and Skills • Inspirational leader who motivates teams through clarity, empathy, and creative ambition., • High energy, adaptable, and thrives in evolving, entrepreneurial environments., • Strong problem-solving capabilities with calm, grounded decision-making., • Naturally curious, culturally aware, and committed to pushing design excellence., • Hybrid in-office requirement: Must be based in and work from NYC, LA, or SF., • Willingness to travel and work flexible hours as needed Compensation Range: $240,000+ annually. This is the pay range OBE believes it will pay for this position at the time of this posting. Consistent with applicable law, compensation will be determined based on level of experience, relevant skills, professional certifications, market pay, and demand for the role. OBE reserves the right to modify this pay range at any time. For this role, Benefits include: medical/dental/vision insurance, employer paid basic life and personal accident insurance. Also included: Annual Profit Sharing/Bonus Plan based on the company's performance and your individual performance, 401(k), Healthcare Flexible Spending Account, Dependent Care Flexible Spending Account, PTO, STD/LTD insurance benefits. On Board Experiential is An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Senior Project Supervisor for our client in the Broadcast/Media domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 9+ Months Contract Location: New York, NY Salary: $60.00-$65.00/Hourly Role: Senior Project Supervisor Primary Skills: Infrastructure Role Description: The Senior Project Supervisor must have 5+ years of experience. Responsibilities: • Create detailed implementation estimates for services/materials in support of proposal efforts., • Develop hardware and material requirements based on construction release documents., • Develop pre-build and on-site planning and schedule for the project implementation phase., • Coordinate installation effort with PM, engineering and client representatives., • Collaborate with PM team to acquire installation resources (project-hire and third-party)., • Collaborate with PM team in identifying any/all remote requirements (housing, travel, etc.)., • Collaborate with PM to provide project implementation budgets, monitor scope issues, and adjust team assignments consistent with budget/schedule constraints., • Collaborate with the Logistics team to ensure timely arrival of project equipment and materials., • Manage on-site/remote implementation team with all install-related tasks., • Provides regular client interface while on site., • Manage implementation team members vacation/time off requests, advancement, demotion and/or disciplinary action., • Approve and/or generate project-hire time sheets on a weekly basis., • Generate and publish progress and material requirement reports., • Provide documentation markups to the Engineering team for publishing as-built documentation., • Manage multiple projects concurrently. Required Qualifications: • 5-7 years in the broadcast/media industry as an Installation Lead or Project Supervisor., • Extremely proficient in the implementation of large-scale professional media systems., • Highly organized yet able to efficiently accommodate project schedule and other changes., • Ability to travel for extended periods of time and work extended hours/weekends as required., • Ability to read/interpret all forms of systems documentation including system diagrams, block diagrams, electrical schematics, configuration tables, elevations, floorplans, and run lists., • Experienced with contemporary cable and connector types and fabrication methods., • Able to explain and demonstrate all applicable installation techniques, procedures, and processes to team members., • Familiar with commercial building trades, organization and procedures used and how they relate to the implementation of professional media systems., • Excellent collaborative skills and ability to maintain positive work relationships., • Strong critical thinking, analytical, and problem-solving skills., • Excellent verbal and written communication skills., • Exceptional research and reporting skills., • Adept with Microsoft Word and Excel and other contemporary tools. Education: Bachelor’s degree in Computer Science, Electrical/Electronic Engineering, Information Technology or another related field or Equivalent Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Zulker Ali Recruiter Phone: 412-286-1325 Benefits: We have various coverages and additional benefits to choose from: • Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll)., • Paid Leaves (Wherever applicable)., • Life & Disability Coverage (Upon eligibility)., • 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #LI-ZA1 #Mastech1

Job Description Summary The Project Manager (PM) serves as the central hub of communication and coordination across clients, contractors, field teams, detailers, engineers, and the shop. As the primary representative of Banker Steel/NYCC for their assigned projects, the PM is responsible for driving schedule adherence, cost control, and quality from detailing through fabrication, erection, and closeout. This role demands a proactive, organized, and solution-oriented professional who thrives in a fast-paced environment and understands that communication, responsiveness, and accountability are key to project success. Responsibilities Leadership & Oversight • Act as the company’s primary representative for assigned projects, maintaining professionalism and responsiveness with all stakeholders., • Drive project execution from detailing to fabrication to erection and closeout, ensuring deadlines and budgets are met., • Lead and facilitate project meetings, including job kickoff and shop kickoff sessions with Sales, General Manager, Shop Manager, QA/QC, and other stakeholders., • Maintain open, factual, and timely communication with management regarding project issues, progress, and risks. Project Administration • Review project scope, contracts, drawings, and specifications to confirm inclusions and exclusions; identify potential gaps early., • Ensure all subcontractors (detailer, connection engineer, erector, deck, joist, miscellaneous metals) are contracted promptly post-award., • Coordinate and manage project documentation, including RFIs, change requests (CRs), approvals, and contract modifications., • Maintain organized digital records, ensuring all emails and project files are properly labeled by project number and stored in designated job folders. Scheduling & Coordination • Develop and maintain internal project schedules covering detailing, fabrication, and erection., • Obtain and integrate schedules from clients, detailers, connection engineers, and subcontractors., • Monitor and manage schedule adherence—releasing complete shop drawing sequences at least 6–8 weeks ahead of fabrication needs., • Update and communicate schedule changes promptly, notifying clients if delays are due to external factors (design or site-related). Shop Coordination • Ensure drawings and approvals are delivered to the shop with sufficient lead time—typically 8 weeks before fabrication start., • Respond quickly to shop questions or clarification requests to prevent production delays., • Collaborate closely with shop management to maintain production flow and quality standards. Site Coordination • Serve as the key point of contact for erectors and field teams, addressing site issues efficiently and proactively., • Manage back charges and corrective work promptly to avoid unnecessary cost exposure, particularly in high-cost markets (e.g., NYC). Client & Contractor Relations • Build and maintain strong, professional relationships with clients, GCs, and CMs—ensuring performance excellence and positioning Banker Steel for future opportunities., • Communicate clearly and promptly regarding RFIs, changes, and schedule impacts., • Represent Banker Steel professionally in all interactions, balancing performance with diplomacy. Detailer & Connection Engineer Coordination • Oversee detailing progress to ensure timely and accurate drawing releases., • Hold detailers and connection engineers accountable to schedule commitments and quality expectations., • Ensure both disciplines receive current design documents and specifications at all times. Change Management • Identify and document all project scope changes immediately., • Create and maintain CR folders, defining clear scope, schedule impacts, and cost implications., • Collaborate with the CR Manager and accounting to process and collect payments for approved changes., • Understand and comply with all contractual change notification requirements. Procurement & Buyouts • Manage buyouts for anchor rods, bolts, bearings, and other specialty items., • Obtain multiple competitive quotes from approved vendors and coordinate with management for any out-of-budget purchases., • Develop accurate general notes reflecting all job requirements and vendor selections. Financial Management • Develop, review, and submit monthly Pay Applications, coordinating closely with accounting and the client., • Verify subcontractor invoices and confirm alignment with work progress and PO agreements., • Maintain cost control and monitor job budgets; notify management immediately if overruns or risks are identified., • Work with management and accounting to ensure all budgets are current, accurate, and aligned with project performance. Qualifications • Bachelor’s degree in Construction Management, Engineering, or related field (or equivalent work experience)., • Minimum 5 years of experience managing structural steel or large commercial construction projects., • Strong understanding of structural steel fabrication, erection, and detailing processes., • Proven ability to manage multiple complex projects under tight deadlines., • Excellent communication, organization, and leadership skills., • Proficiency in Microsoft Office Suite (Excel, Word, Teams, Project) and Bluebeam Revu., • Familiarity with Tekla EPM (Powerfab) and other project management tools preferred. Key Skills • Leadership & Accountability: Owns project outcomes and drives collaboration across teams., • Communication: Keeps stakeholders informed, aligned, and engaged., • Organization & Planning: Balances multiple schedules, documents, and tasks with precision., • Problem Solving: Anticipates issues and develops practical, timely solutions., • Financial Acumen: Manages project budgets, cost impacts, and change management effectively., • Client Focus: Builds trust and strengthens relationships through performance and professionalism., • Resilience: Handles pressure and shifting priorities with composure and focus. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description Are you a proactive sales professional with strong connections in the architecture and design community? Eventscape is seeking a motivated A&D sales representative based in New York to drive our sales efforts and build impactful client relationships. This role offers you the opportunity to leverage your deep understanding of market potential in the region, generating leads and closing deals in the AEC sector. This role has a base salary, plus a commission structure. WHO ARE WE? Eventscape is a global leader in custom architectural fabrication, committed to tackling challenging designs and pushing the boundaries of innovation. We specialize in engineering, fabricating, and installing cutting-edge projects for top architects, designers, developers, contractors, and artists. With state-of-the-art machinery and a commitment to both traditional craftsmanship and advanced digital fabrication, Eventscape truly is an architectural toy factory—We build things others can’t. ABOUT THE ROLE The A&D Sales Representative position will: • Explore new business opportunities and establish relationships with key industry players, both locally and internationally., • Meet sales targets by generating new client revenue through proactive outreach, networking, and creative lead pursuit., • Host presentations and lunch & learn events showcasing Eventscape’s capabilities., • Represent Eventscape at trade shows, industry gatherings, and networking events., • Qualify potential projects quickly to ensure resources are allocated effectively., • Report on industry and market trends and identify new opportunities., • Answer questions and provide information about Eventscape’s offerings to potential and existing clients., • Create and deliver compelling project proposals to secure new clients., • Work closely with the internal team to refine sales strategies., • Continually expand your technical knowledge of material characteristics and applications., • Travel as needed to build client relationships, deliver presentations, and engage in networking., • Occasionally visit project sites during installations to ensure client satisfaction., • Support the internal team with client requests, takeoffs, and bid submissions. ABOUT YOU The ideal candidate will have: • 3+ years of experience in sales related to architecture, design, or custom fabrication., • Familiarity with industry terminology and practices for architects, builders, designers, engineers, and developers., • Ability to build and maintain strong relationships with clients and industry professionals., • Great interpersonal skills and a positive, professional demeanor., • Demonstrated sales and negotiation success in architectural sales., • Exceptional communication and presentation skills., • Strong analytical skills for assessing risks and opportunities in proposals., • Client-focused with effective networking skills., • Proficient in Excel, Word, Outlook, and Adobe PDF. APPLY NOW If you're ready to make an impact in the architecture and design world and drive transformative growth, we want to hear from you. Apply now with your resume and a brief cover letter detailing your experience in sales and client relationship management in the AEC sector. Join us as we build the extraordinary. For more information or if you need disability accommodation, contact human resources at (416) 231-8855. We wish to thank all applicants for their interest in Eventscape, but only those selected for an interview will be contacted. Eventscape is committed to fostering a workplace in which individual differences are recognized, appreciated, and respected. Eventscape will consider all qualified candidates and welcomes and encourages applications from people with disabilities. Accommodations are available for all stages of the selection process. Powered by JazzHR 2DQfoPsq9x