Drive testing jobs in Piscataway, New JerseyCreate job alerts

Job ID: 718202BR Date posted: Feb. 16, 2026 Description:What We're Doing Here at Lockheed Martin Rotary and Mission Systems (RMS) we take on the biggest and baddest challenges in the world. We seek out innovative ideas and creative solutions to seemingly impossible problems facing our customers in the Integrated Warfare Systems & Sensors (IWSS) organization. We collaborate with the best Radar engineers in the business across the Moorestown, NJ and Syracuse, NY sites to invent solutions where they don't exist yet. We keep pushing the boundaries of Electronic Protection solutions to stay ahead of the adversary in the ever-evolving game of cat-and-mouse that is Electronic Warfare. If you're looking for the challenge of a lifetime on a team of the brightest minds in the world, then Rotary Mission Systems and the Electronic Protection team is the place for you. If you're looking for life-long learning and a career where the hard work is the fun part, then you're in the right place. Lockheed Martin. Your Mission is Ours. The Work In your role as a Senior Systems Engineer - Radar Electronic Protection, you will: • Develop models and/or detailed simulations to support system design evaluation., • Conduct data analysis to assess system performance., • Write verification plans and test procedures showing traceability to system and software specifications., • Support integration and test, evaluate test results, investigate discrepancies, provide technical assessment of anomalies, and drive issues to resolution., • Conduct system verification and support certification activities., • Participate in landmark reviews of Radar System products with internal and external customers, program and senior leadership, and multi-disciplinary engineering teams., • Mentor junior engineers and share knowledge of Electronic Protection concepts. Who We Are Our Electronic Protection team of systems engineers and sensor architects all working together to deliver quality designs and cutting-edge capabilities to our customers. We support a broad array of Radar products and customers including the Missile Defense Agency, US Navy, Air Force, US Army, Space Force, and foreign partners including Japan, Canada, Spain, Norway, Australia, UK and more. Radar at Lockheed Martin Radar at Lockheed Martin Who you are If you enjoy a technical challenge that will get you thinking outside the box. If you seek a collaborative environment working with other motivated engineers. If you like getting your hands dirty in architecting new designs, digging into the nuances of algorithm performance, developing novel models, supporting live testing of tactical systems, or anything in between. If you're ready to take on the complexities of an ever-evolving adversary driving new Electronic Protection designs, then this is the place for you. Why Join Us At Lockheed Martin we value your unique skills and expertise, and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, healthy, and fulfilling lives at and outside of work. Some of our favorite perks include: Learn more about Lockheed Martin's comprehensive benefits package here! Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: #REAS Basic Qualifications: • Bachelor's degree or higher in Electrical Engineering, Computer Science/Engineering, Physics or equivalent combined with 5 years of related experience., • Functional knowledge of Radar Systems., • Demonstrated experience in one or more of the following areas: system analysis, architecture, requirements development, trade studies, modeling and simulation, or integration and test., • High proficiency in C++ or Matlab or Python., • Advanced degree in Electrical Engineering, Computer Science/Engineering, Physics or equivalent., • Radar and Electronic Warfare (i.e. Electronic Protection, Electronic Attack) systems development experience including software, data analysis, and modeling and simulation, and Integration and Test phases, • Demonstrated analytical, applied mathematics and problem-solving skills., • Experience with automated Continuous Integration/Continuous Delivery methodologies and frameworks., • Experience developing solutions to operate in congested RF environments, including (EMI) Electromagnetic interference. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: No Career Area: Systems Engineering: Assembly/Integration and Test Type: Full-Time Shift: First

Job ID: 715544BR Date posted: Jan. 21, 2026 Description:As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you're looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. The Work Radar Systems Engineering within Rotary & Mission Systems (RMS) is seeking a candidate to support the design, integration, and test verification of high performance radar systems. The successful candidate will have strong analytic and communication skills, and work well in a dynamic, multi-disciplinary environment. The Radar Systems Engineer will: Who We Are Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Camden, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Learn more about IWSS Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. Learn more about Lockheed Martin's comprehensive benefits package here! #buildradars #rmshotmiljobs #REAS Basic Qualifications: • Bachelor's degree or higher in Electrical Engineering, Computer Engineering, Computer Science, Systems Engineering, Physics or related STEM degree with minimum 5 years' leadership or technical related experience., • Proficiency in C++, MATLAB, LINUX or equivalent object-oriented computing language., • Experience working with customers to drive complex technical issues/challenges to closure., • Program or Project Management experience leading teams of 25 or more people, • Flexibility to work non-standard work shifts as required by the supported program, • Active DoD Secret level clearance or higher., • Program or Project Management experience leading geographically dispersed, international teams of 50 or more., • Functional knowledge of Radar systems, subsystems and designs with familiarity of radar physics and design tools for radar modeling., • Lean Six Sigma Certification., • Experience with identifying and managing risks for large programs, • Demonstrated analytical, applied mathematics and problem-solving skills., • Excellent written and oral communication skills. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: No Career Area: Systems Engineering: Other Type: Full-Time Shift: Multiple shifts available

Company Driver | Refrigerated Location: New Brunswick, NJ Company: Schneider Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position New pay increase - Team Van Truckload truck driver Average pay: $1,340-$1,630 weekly Home time: Every three weeks Experience: All CDL holders Overview Dry van trailers with 100% no-touch freight. Drive within all 48 states. Take your dog or cat on the road with our Team Pet Policy. Pay and bonus potential Now earn up to 13¢ more per mile. Mileage pay up to $0.75 cents per mile, plus hourly pay while on duty, not driving. Weekly paychecks. Weekly performance pay. $2,000 sign-on bonus paid over 12 monthly payments in your first year for experienced drivers. $1,000 sign-on bonus paid over 12 monthly payments in your first year for inexperienced drivers. Paid orientation. Paid time off after 6 months, plus 6 days of holiday pay per year. Annual bonus: Earn up to 2% of annual gross pay each year. “The new pay has been a game changer. We have noticed an almost $300 increase in each of our weekly paychecks.” Robert and Kelly, VTL team drivers Qualifications Valid Class A Commercial Driver’s License (CDL). Live within 70 miles of Kearny, NJ. Need CDL training? Explore our company-paid CDL training programs or call us at 800-447-7433, and we can talk you through it. Additional benefits Medical, dental and vision insurance. 401(k) savings plan with company match. Unlimited referral bonuses. $200/month tuition reimbursement (up to $7,000) for qualified drivers. Credit for Military Experience and Military Apprenticeship programs, plus more military benefits. Leading equipment and technology specs designed for driver comfort. See full list of driver benefit package. More reasons to choose Schneider Team driving New equipment – Elite Team-spec'd trucks average only 12 months old, with automated transmissions, optimized idle, upgraded driver’s seat and more. The amenities you want – Nationwide facility network with free parking, many locations offering free showers, laundry, WiFi, exercise equipment, TV lounges, cafeterias and more. Constant support – Team driver advisors, current or previous top-performing Schneider Teams, provide insights and tips. Schneider's inclusive culture Our history has taught us that treating everyone with dignity and respect is vital to our ongoing success. We embrace and seek out diversity that is inclusive of thought, race, ethnicity, national origin, sex, gender, gender expression, age, religion, sexual orientation, ability, medical condition, veteran or military status, experience and background. This diversity and openness ensures all associates have equal access to opportunities and resources to contribute fully to the organization's success, and it fuels innovation, improves strategic thinking and cultivates leadership. Any applicant may request a reasonable accommodation to complete a job application, pre-employment testing, or job interview or to otherwise participate in the hiring process consistent with the Americans with Disabilities Act (ADA) by contacting their Recruiter, Human Resources Business Partner, and/or Human Resources Leave Administration. Schneider uses E-Verify to confirm the employment eligibility of all newly hired associates. To learn more about E-Verify, including your rights and responsibilities, please visit . Job Company Driver Schedule FULLTIME Sign On Bonus 2000 PI283370621

Company Driver | Intermodal Location: Edison, NJ Company: Schneider Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position Intermodal truck driver Average pay: $1,580-$1,930 weekly Home time: Weekly Experience: 3 months or greater CDL experience Overview Haul freight containers secured to company-owned chassis. 99% no-touch freight with 70% drop-and-hook. Drive in and out of railyards within the Northeast. Pay and bonus potential Hourly pay and load pay. Paid orientation. Paid time off after 6 months, plus 6 days of holiday pay per year. Annual bonus: Earn up to 3% of annual gross pay each year. Qualifications Valid Class A Commercial Driver’s License (CDL). Tanker endorsement and HazMat endorsement are strongly preferred. Live within 100 miles of Kearny, NJ. Minimum 3 months of Class A driving experience. Need one or more of your endorsements, or unsure if you qualify? Call us at 800-447-7433, and we can talk you through it. Additional benefits Medical, dental and vision insurance. 401(k) savings plan with company match. Unlimited referral bonuses. Credit for Military Experience and Military Apprenticeship programs, plus more military benefits. Leading equipment and technology specs designed for driver comfort. See full list of driver benefit package. More reasons to choose Schneider Intermodal driving More drop-and-hook freight – Spend more time moving and less time waiting at loading docks. Specific training – Attend paid intermodal orientation at a major hub. Leading technology – Use tablets and mobile apps to get the job done quicker and easier. Schneider's inclusive culture Our history has taught us that treating everyone with dignity and respect is vital to our ongoing success. We embrace and seek out diversity that is inclusive of thought, race, ethnicity, national origin, sex, gender, gender expression, age, religion, sexual orientation, ability, medical condition, veteran or military status, experience and background. This diversity and openness ensures all associates have equal access to opportunities and resources to contribute fully to the organization's success, and it fuels innovation, improves strategic thinking and cultivates leadership. Any applicant may request a reasonable accommodation to complete a job application, pre-employment testing, or job interview or to otherwise participate in the hiring process consistent with the Americans with Disabilities Act (ADA) by contacting their Recruiter, Human Resources Business Partner, and/or Human Resources Leave Administration. Schneider uses E-Verify to confirm the employment eligibility of all newly hired associates. To learn more about E-Verify, including your rights and responsibilities, please visit . Job Company Driver Schedule FULLTIME Sign On Bonus PI283607862

Date Posted: 2026-02-17 Country: United States of America Location: US-MA-TEWKSBURY-TB1 ~ 50 Apple Hill Dr ~ ASSABET BLDG Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. With over 100 years of experience, we bring renowned engineering expertise to stay ahead of tomorrow’s threats. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is seeking a Senior Software Engineer to join the National Advanced Surface-to-Air Missile System (NASAMS) team. NASAMS is a cutting-edge air defense system that protects critical assets and population centers from aerial threats by integrating advanced radar, command and control, and missile systems. This role is based in Tewksbury, Massachusetts, where you’ll work collaboratively to deliver high-quality software solutions that support the NASAMS system effectivity chain: Detect, Decide, Engage, and Destroy. Leveraging Agile and DevSecOps principles, you’ll design, develop, test, and deploy software for mission-critical capabilities. As a senior member of the team, you will also mentor junior engineers, fostering a culture of technical excellence and collaboration. What You Will Do Design, develop, and deliver real-time software for NASAMS, including Detect, Decide, Engage, and Destroy functionalities. Develop solutions for target acquisition, threat evaluation, missile firing, and other critical functions. Maintain and deploy complex software in an Agile/DevSecOps environment with secure, high-quality, high-frequency deliveries. Mentor junior engineers, promoting technical growth and collaboration. Participate in reviews of software components to ensure quality and alignment with program requirements. Contribute to testing frameworks and CI/CD practices to enable efficient software validation and delivery. Solve problems within defined scope and ensure seamless integration of software with NASAMS hardware and systems. What You Will Learn The workings of the NASAMS system, including integration with advanced radar and C2 systems. How to design and maintain software for complex, real-time systems supporting mission-critical functions. Leadership skills to coordinate and contribute to multi-disciplinary teams. Best practices for software testing and deployment in a DevSecOps environment. How to collaborate in a fast-paced, Agile environment delivering secure, high-frequency updates. Key Contributions to NASAMS - as part of the NASAMS program, you will contribute to the following areas: Detect: Develop solutions for target acquisition, integrated IFF, and tracking updates. Decide: Implement Single Integrated Air Picture, threat evaluation, launcher assignment, and multi-missile handling. Engage: Create algorithms for azimuth slew, targeting data transfer, missile firing, and mission abort. Destroy: Support motor ignition, inertial guidance, seeker search, target lock-on, and terminal guidance. Qualifications You Must Have Typically requires a Bachelor's of Science Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience. Experience in programming languages (e.g., C++, Java). Experience with Agile and DevSecOps methodologies and tools (e.g., CI/CD pipelines, Docker, Jenkins). Experience leading teams and resolving complex technical challenges. Ability to obtain U.S. government issued Secret security clearance is required after start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer Strong problem-solving and communication skills. Extensive experience with radar software development and/or radar concepts. Familiarity with missile defense programs and large, complex systems. Hands-on experience with tools such as the Atlassian Suite (e.g., Bitbucket, Artifactory, JIRA, Confluence), Jenkins, Eclipse, and Ansible. Strong knowledge of Linux Operating Systems, particularly Red Hat Enterprise Linux. Familiarity with CI/CD environments and pipelines, including experience with DevSecOps methodologies. Advanced knowledge of software integration, testing frameworks, and debugging tools. Ability to succeed in a fast-paced, dynamic environment with time-critical requirements. Proven experience contributing to a team environment and developing creative solutions. Demonstrated ability to promote a culture of continuous learning and collaboration. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligible. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-23 Country: United States of America Location: US-MA-TEWKSBURY-TB3 ~ 50 Apple Hill Dr ~ CONCORD BLDG, Tewksbury Tb3 300 Concord Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Are you passionate about turning innovative concepts into reality? Do you thrive in dynamic environments? Raytheon is seeking a talented and motivated Principal Systems Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting the LTAMDS and GhostEye Radars. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment. Every day will bring new challenges, requiring you to work across disciplines to troubleshoot issues, perform data analysis, and implement solutions. Your contributions will directly impact the success of mission-critical defense systems, and you'll have a hands-on role in ensuring the entire system functions seamlessly. This role can be based out of Tewksbury, Andover, or Marlborough MA or Pelham NH. What You Will Do: In this Systems Engineer role, you will support the following types of activities: Core Systems Engineering: Develop requirements and algorithms, concepts of operations, and define system interfaces. Lead Testing Efforts: Develop and implement test plans, procedures, integration, and verification documentation in both simulated and real-world environments. Troubleshoot and Analyze: Identify and resolve hardware, software, and system issues through detailed data analysis and debugging. Drive Performance: Work across functions to drive performance improvements and resolve system issues. Modeling and Simulation: Develop and execute models to predict system performance and support verification and validation. Integrate Systems: Integrate hardware and software into tactical systems, evaluating their functionality and impact. Partner and Lead: Work with and lead a multi-disciplinary team to achieve seamless integration and system functionality. Document and Communicate: Develop integration documentation, execute plans, analyze data, verify requirements and effectively communicate results to leadership and stakeholders. Perform Data Analysis: Conduct statistical and numerical analysis of radar performance data to ensure optimal system performance and verify requirements. Present Findings: Present technical findings and solutions to leadership and customers. Support Missions: Travel as needed (up to 20%) to support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations. Qualifications You Must Have: T ypically requires a degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 8 years of prior relevant experience. Experience with systems software, systems hardware, systems requirements, systems integration, and/or systems test. Qualifications We Prefer: Experience with DOORS, Rhapsody, Cameo, or other digital engineering tools. Experience with model-based engineering. Experience in developing and managing requirements. Experience developing both scripts and functions with MATLAB. Experience with C++, Python, or similar Experience with generating technical documentation, such as test plans, procedures, or technical reports. Experience working in an integration lab, test facility, or in the field, supporting integration and/or verification. Experience with evaluating systems using simulated environments. Experience interfacing with internal and external customers. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

New pay increase - Team Van Truckload truck driver Average pay: $1,340-$1,630 weekly Home time: Every three weeks Experience: All CDL holders • Dry van trailers with 100% no-touch freight., • Drive within all 48 states., • Take your dog or cat on the road with our Team Pet Policy., • Now earn up to 13¢ more per mile., • Mileage pay up to $0.75 cents per mile, plus hourly pay while on duty, not driving., • Weekly paychecks., • Weekly performance pay., • $2,000 sign-on bonus paid over 12 monthly payments in your first year for experienced drivers., • $1,000 sign-on bonus paid over 12 monthly payments in your first year for inexperienced drivers., • Paid orientation., • Paid time off after 6 months, plus 6 days of holiday pay per year., • Valid Class A Commercial Driver’s License (CDL)., • Medical, dental and vision insurance., • 401(k) savings plan with company match., • Unlimited referral bonuses., • $200/month tuition reimbursement (up to $7,000) for qualified drivers., • Credit for Military Experience and Military Apprenticeship programs, plus more military benefits., • Leading equipment and technology specs designed for driver comfort., • See full list of driver benefit package., • New equipment – Elite Team-spec'd trucks average only 12 months old, with automated transmissions, optimized idle, upgraded driver’s seat and more., • The amenities you want – Nationwide facility network with free parking, many locations offering free showers, laundry, WiFi, exercise equipment, TV lounges, cafeterias and more. Schneider uses E-Verify to confirm the employment eligibility of all newly hired associates. To learn more about E-Verify, including your rights and responsibilities, please visit . Job Company Driver Schedule FULLTIME Sign On Bonus 2000 Compensation details: 1340-1630 Yearly Salary PIe5a7533a6386-37820-33783002

Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite, Price Rite Marketplace, The Fresh Grocer, Dearborn Market, Gourmet Garage, and Fairway Market Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. Summary The Associate Manager, Financial Systems & Transformation, is responsible for overseeing Wakefern’s core financial systems, gross profit reporting, and finance transformation initiatives. This role ensures stability, accuracy, and continuous improvement of Oracle Financial systems and Gross Profit / Cash & Sales processes that support Retail Members, Corporate and Shared Financial Services. The position leads a team of financial systems and gross profit professionals, partners closely with Technology and Finance Leadership, and drives modernization through process improvement, automation, and data‑driven insights. Essential Functions • Financial Systems Leadership & Gross Profit Oversight, • Oversee Oracle Financial systems including General Ledger, Accounts Payable (including OCR), Fixed Assets, Gross Profit, and Cash & Sales., • Accountable for ensuring accurate, timely, controlled, and scalable financial processing and reporting for 48+ Members, 70+ stores, and Wakefern corporate entities, while driving continuous improvement through technology, data, and AI‑enabled capabilities., • Ensure reliable operation of high‑volume interfaces (POS Cash & Sales, Payroll, Inventory, Coupons, DSD, Pharmacy, Reclamation, Utilities)., • Oversee period‑end, quarter‑end, and year‑end close system readiness, including reconciliations, controls, and issue resolution., • Ensure master data governance alignment (vendors, GL accounts, calendars, legal entities), • Partner with Technology and SFS leadership on system upgrades, enhancements, testing, and issue resolution., • Provide leadership oversight for the Gross Profit team, covering Gross Profit reporting, balance sheet reconciliations, audit schedules, and member support related to GP and inventory., • Ensure accuracy and integrity of Cash & Sales feeds from member POS systems into Oracle GL., • Oversee member support, training, and issue resolution related to GP, inventory results, and reporting., • Finance Transformation & Continuous Improvement, • Drive process documentation, standardization, and optimization across finance systems and reporting., • Identify and implement automation, analytics, and AI‑enabled improvements., • Support SAP S/4HANA coexistence and future‑state finance transformation initiatives., • Establish and monitor KPIs, controls, and operational metrics to measure efficiency, quality, and risk., • Ensure strong internal controls, documentation, and timely remediation of issues., • Leadership & Stakeholder Management, • Manage and develop a team of financial systems and gross profit associates setting priorities, balance workloads, and ensuring coverage and succession planning for critical processing and support activities., • Serve as the primary liaison between Finance, Technology, SFS, external vendors, and auditors., • Prepare executive‑level dashboards, updates, and decision materials. Qualifications • Required, • Bachelor’s degree in Accounting, Finance, Business, or Information Systems., • 7+ years of progressive experience in Financial Systems, Accounting Operations, or Finance Transformation., • Hands‑on experience with Oracle Financials (EBS or similar) across GL, AP, and integrated sub‑systems., • Strong understanding of retail accounting, gross profit, inventory, and cash & sales processes., • Experience managing cross‑functional teams and complex stakeholder environments in operational and project settings., • High attention to detail with the ability to balance operational rigor and strategic thinking., • Demonstrated ability to lead change, influence stakeholders, and hold teams accountable., • Strong Microsoft 365 skills, including Excel (advanced), Power Query/BI, Teams, and SharePoint., • Preferred, • MBA or CPA, • Experience leveraging automation, analytics, and AI tools to improve finance processes., • Excellent analytical, communication, stakeholder and project management skills., • Ability to lead in a fast‑paced, transformation‑driven environment. Working Conditions & Physical Demands • Availability to work a varied, flexible schedule to meet business demands, • Ability to monitor computer screens for long periods of time, • Ability to work a schedule as established by the division (4 days on-site) Core Competencies • Communicate Effectively: Communicates thoughts and ideas in a well-organized manner, encouraging two-way communication., • Build Relationships: Creates cross-functional partnerships through the development and maintenance of constructive and cooperative relationships., • Stay Competitive: Demonstrates a mindset of continuous improvement while exhibiting passion and enthusiasm for their work., • Embrace Change: Looks for new ways of working by supporting advancements in processes and technology., • Develop You: Identifies and capitalizes on opportunities for personal and professional career growth., • Drive for Results: Supports divisional and strategic objectives through achievement of work goals.

Intermodal truck driver Average pay: $1,580-$1,930 weekly Home time: Weekly Experience: 3 months or greater CDL experience • Haul freight containers secured to company-owned chassis., • 99% no-touch freight with 70% drop-and-hook., • Drive in and out of railyards within the Northeast., • Hourly pay and load pay., • Paid orientation., • Paid time off after 6 months, plus 6 days of holiday pay per year., • Annual bonus: Earn up to 3% of annual gross pay each year., • Valid Class A Commercial Driver’s License (CDL)., • Tanker endorsement and HazMat endorsement are strongly preferred., • Live within 100 miles of Kearny, NJ., • Medical, dental and vision insurance., • 401(k) savings plan with company match., • Unlimited referral bonuses., • Credit for Military Experience and Military Apprenticeship programs, plus more military benefits., • Leading equipment and technology specs designed for driver comfort., • See full list of driver benefit package., • More drop-and-hook freight – Spend more time moving and less time waiting at loading docks., • Specific training – Attend paid intermodal orientation at a major hub. Schneider uses E-Verify to confirm the employment eligibility of all newly hired associates. To learn more about E-Verify, including your rights and responsibilities, please visit . Job Company Driver Schedule FULLTIME Sign On Bonus Compensation details: 1580-1930 PI9b48e9970ab8-37820-38142343

Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, Fairway Market®, and Gourmet Garage® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. We are seeking a seasoned SAP MM Procurement Lead with deep expertise in retail supply chain processes to lead procurement transformation initiatives. The candidate would also be Participate in design and implementation of overall Procurement solutions including Master Data, Direct and Indirect Procurement, Vendor Funding, Promotion Management (PMR), Sourcing Strategy, PO pricing, WMS and EDI integration and other related functionality Key Responsibilities • Lead SAP MM module implementation in retail environments, focusing on procurement, inventory, and supply chain processes., • Drive the conceptual work and provide recommendations around overall S/4 HANA P2P (Procure to Pay) and system architecture as well as implementation roadmap to support business requirements, • Design and configure Procure-to-Pay (P2P) processes including purchase requisitions, purchase orders, inventory management, vendor evaluation, and invoice verification., • Responsible for all Procure to Pay (P2P) configuration and integration with other downstream applications, legacy systems, warehouse management system and third party application, • Collaborate with business stakeholders to gather requirements and translate them into functional specifications and coordinate closely with the ABAP team to ensure successful completion of the enhancement., • Facilitate collaborative architecture discussions within IT, with Business and external SMEs, • Lead and mentor a team of SAP consultants and collaborate with cross-functional teams and stakeholders to ensure alignment and success., • Oversee master data management for articles, vendors, and purchasing info records., • Conduct fit-gap analysis, blueprinting, and solution design for procurement processes., • Support testing, training, and change management activities during project rollout, • Scope includes working with other SAP and non-SAP systems and support any enhancements and related integrations, • Drive end-to-end Accounts Payable process optimization, including invoice receipt, three-way matching, exception handling, and payment processing., • Collaborate with finance teams to resolve AP discrepancies, automate workflows, and improve vendor payment cycles. Experience: • 10+ years of SAP MM experience, with 3+ years in retail procurement., • Strong understanding of retail supply chain, store replenishment, and procurement cycles., • Experience with a focus on Supply Chain / Procure to Pay, WMS and EDI integration, Purchasing in Retail Industry, • Experience with SAP IS-Retail (Article Master, Site Master, Listing, Pricing), • Experience with cross-functional Integration with Sales & Distribution / Order to Cash, Inventory & Warehouse Management, and Accounts Payable processes strongly preferred, • Experience with Ariba modules (Sourcing, Buying, Contracts, Supplier Management) is a plus, • Demonstrated proficiency in leveraging AI tools to enhance business processes, automate workflows, and support data-driven decision-making., • Strong understanding of SAP Business Technology Platform (BTP), including its integration capabilities, extension suite, and data management services., • Hands-on experience integrating SAP S/4HANA with mainframe systems, ensuring seamless data exchange and process synchronization across heterogeneous environments., • Experience with BAPI, IDoc, API and FIORI apps is beneficial, • Excellent communication, stakeholder management, and problem-solving skills. Other Qualifications and Competencies: • Bachelor’s Degree in areas of Business Information, Information technology, Engineering or other alternative education in support of requirements, • Strong understanding of SAP Retail solution portfolio and product strategy, • Prior experience in MRP, Production Orders and Planned Order – nice to have

Company Description PLS Analytical provides comprehensive testing services for regulated product programs, specializing in nasal drug products, microbiological, analytical, and packaging component testing. The company offers innovative solutions for product characterization and risk assessment, including Particle Size Analysis and Nitrosamine Testing. Serving the pharmaceutical, nutraceutical, dietary supplement, cosmetic, and food industries, PLS Analytical operates as an FDA- and DEA-registered contract laboratory with CGMP and ISO 17025 certifications. Committed to quality, PLS Analytical also supports private label OTC manufacturing, packaging, and distribution through its partner network. Learn more at . Position Summary This is a full-time, on-site role for a Facility Engineer based in East Brunswick, NJ. The Facility Engineer will play a key role in managing facility operations in a cGMP-regulated pharmaceutical environment. This role is responsible for the maintenance, repair, and continuous improvement of HVAC systems, electrical and mechanical equipment, critical utilities and overall facility infrastructure. The Facility Engineer will oversee preventive maintenance planning, scheduling, contractor coordination and ensure all work is completed in compliance with cGMP, safety, and regulatory standards. Accurate cGMP documentation, system reliability, and operational efficiency are essential to success in this role. Key Responsibilities • Oversee the design, planning, construction, installation and maintenance of building systems, equipment and facility infrastructure., • Ensure all facility operations comply with FDA, cGMP, and safety regulations, including maintenance of required documentation., • Develop, execute and review IQ/OQ/PQ protocols for equipment, utilities, and in-process machinery., • Install, qualify and upgrade pharmaceutical manufacturing equipment as needed., • Troubleshoot electrical, mechanical, and integrated control systems for manufacturing machinery., • Lead and coordinate commissioning, installation, and validation activities with internal teams and external contractors., • Manage facility upgrades, electrical engineering projects and site expansion initiatives., • Evaluate project requirements , capacity constraints and cost estimates to support business needs., • Drive cost reduction, efficiency optimizations, safety improvements, and equipment reliability initiatives., • Supervise and support facility maintenance personnel, including mechanics and engineers., • Coordinate with warehouse , production and laboratory teams on facility support needs., • Implement and maintain preventive maintenance and calibration programs., • Lead EHS (Environment, Health, Safety) activities, including employee safety training and compliance., • Conduct risk assessments and support CAPA, FMEA and DFMEA activities., • Analyze facility performance data and maintenance reports to develop continuous implement plans. Qualifications • Strong expertise in Facilities Engineering and Facility Management (FM) to oversee and maintain building systems and equipment, at least 2 years of experience in the position offered., • Proficiency in Facilities Operations, including maintenance schedules and compliance with safety standards, • Ability to troubleshoot technical problems and resolve issues efficiently, • Experience with Preventive Maintenance programs to ensure equipment reliability, • Understanding of safety regulations and building codes, • Strong analytical and decision-making skills, • Bachelor’s degree in Engineering, Facilities Management, or a related field preferred, • Industry certification or licenses related to facility management is a plus

Overview The Site Quality Manager is responsible for leading the quality function at their site and developing, implementing, and continuously improving the Humanscale Business System which exceeds customer expectations, satisfies regulatory requirements, improves operational efficiency, and reduces the cost of poor quality. Essential Functions • Customer Focus and Continuous Improvement, • Promote a quality culture and customer focused approach, • Capture the Voice of the Customer through customer feedback to enable development and value chain to improve design and execution, • Drive timely and effective resolution of customer issues, • Leadership, • Lead the Quality Assurance, Quality Control, and Quality Testing functions within the site, • Supervise workers engaged in the inspection and testing of activities to ensure efficient productivity and high technical integrity, • Manage the performance of the team through key performance metrics. Develop team to continuously improve performance and results, • Design, develop, and implement quality control training programs, • Conduct or arrange periodic training sessions to keep team members informed on proper procedures and methods, • Operations, • Establish and deploy site Quality objectives in line with Global Quality objectives, • Analyze and communicate the adequacy and effectiveness of the Humanscale Business System through performance metrics, • Coordinate and participate in Material Review Board (MRB) meetings, • Lead and participate in root cause analysis, • Drive effective corrective actions to prevent recurrence of non-conformances utilizing A3/SPS, 8D, and similar tools, • Execute cost of poor quality reduction measures to drive company savings, • Ensure compliance with customer, industry, and regulatory requirements, • Improve and error-proof business processes utilizing SS / Lean methodologies, • Develop, implement, and maintain quality specifications and standards for all raw materials, components, and finished goods, • Create, document, and implement inspection criteria and procedures, • Quality System, • Lead site Quality Performance Reviews, • Lead internal audits and drive timely closure of findings, • Apply total quality management tools and approaches to analytical and reporting processes Qualification • Bachelor’s degree from an Engineering discipline (Mechanical preferred), • Minimum of 3-5 years of experience in Quality Control in a manufacturing environment, • Minimum of 2 years of management experience, • Knowledge of Quality Management Systems, especially ISO 9000, • Knowledge of ERP systems, especially Oracle and Infor, is highly desirable, • Lean Manufacturing experience a plus, • Experience with developing/documenting procedures, • Excellent interpersonal skills to lead the quality function to a higher level of performance, • Demonstrated customer focus, with drive and determination to improve quality performance, • Able to direct and lead others to produce desired results, • Demonstrated analytical skills, combining multiple data sources to create quality insights that drive improvement., • Demonstrates attention to detail and thrives in a team environment., • Exercise initiative, achievement, and independent judgment WHAT WE OFFER: • Competitive base, • Medical Benefits (Medical, Dental, Vision), • HSA, FSA, Commuter Benefits, • Medical Discounts, • Ancillary Benefits, • Accident, Critical Illness, Hospital Insurance, • Voluntary, Spouse, and Child Life Insurance, • Pet Insurance, • Employee Discount Programs, • 401k matching, • Paid time off (including 15 PTO days and 11 holidays) Salary Range: $86,829 - $126, 649 Please note that the salary information is a general guideline. Humanscale considers other factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market location and business considerations when extending an offer. Company Overview Humanscale is the premier designer and manufacturer of ergonomic products that improve health and comfort at work. We have a focus on sustainability with 70% of our products currently certified as having a Net Positive impact on the environment. Our award-winning office products – seating, sit/stand desks, technology support and lighting – have led the industry in performance and simplicity for over 40 years. Humanscale is an Equal Opportunity Employer (Disabled/Veteran) Scam Notice: Please be aware that there are individuals and organizations that may attempt to scam job seekers by offering fraudulent employment opportunities in the name of Humanscale. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers. Humanscale will never ask for any personal account information, such credit card details or bank account numbers, during the recruitment process.

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, Fairway Market®, Gourmet Garage®, Di Bruno Bros.® and Morton Williams® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best in class procurement practices. About You Your contribution The Benefits & Retirement Analyst supports the administration, compliance, and ongoing operations of retirement, health & welfare, and leave programs. This role assists with 401(k) and pension plan administration, benefits and leave-related compliance activities, associate inquiries, and HRIS/HCM system support. The Analyst also provides support for compensation review activities. This position works under the direction of the Manager of Benefits. It is located in Edison, NJ. What you will do Retirement & Health and Welfare Administration • Support day-to-day administration of 401(k) and defined benefit pension plans, • Assist with health and welfare benefit administration including eligibility and enrollments, • Respond to associate inquiries and research participant records, • Coordinate with vendors under direction of management, • Assist with benefit orientations and communications Leave Administration Support • Support administration of leave programs including FMLA, state and local leave, disability, and company-sponsored leave policies, • Assist with leave eligibility tracking, documentation, and coordination with payroll and leave vendors, • Respond to associate leave inquiries and escalate complex cases as needed, • Support leave compliance, reporting, and recordkeeping activities, • Assist with HRIS configuration and maintenance related to leave tracking Compliance & Audit Support • Assist with compliance testing, audits, and data preparation, • Support documentation for Form 5500 and regulatory filings, • Maintain plan and policy documentation, • Escalate potential compliance concerns to management Compensation Support • Support annual compensation review cycles, • Assist with job descriptions, job evaluations, and FLSA reviews, • Support survey participation and compensation documentation HRIS / HCM System Support • Provide functional support for benefits, retirement, compensation, and leave configuration in HRIS, • Assist with system testing, audits, and data validation, • Document processes and system changes What we’re looking for • 2–4 years of experience in benefits, leave, retirement, or HRIS-adjacent roles, • Bachelor’s degree in Human Resources, Business Administration, or related field, • Working knowledge of benefits and leave regulations including ERISA and FMLA, • Strong organizational and analytical skills, • Strict attention to detail, • Excellence communication, customer service, and presentation skills with the ability to deal tactfully and professionally, • Strong ability to maintain a high level of confidentiality, • Proficient in Microsoft Office (Word, Excel, PowerPoint), • Professional certification a plus How you will succeed • Communicate Effectively: Communicates thoughts and ideas in a well-organized manner, encouraging two-way communication., • Build Relationships: Creates cross-functional partnerships through the development and maintenance of constructive and cooperative relationships., • Stay Competitive: Demonstrates a mindset of continuous improvement while exhibiting passion and enthusiasm for their work., • Embrace Change: Looks for new ways of working by supporting advancements in processes and technology., • Develop You: Identifies and capitalizes on opportunities for personal and professional career growth., • Drive for Results: Supports divisional and strategic objectives through achievement of work goals. How you will work • Prolonged periods of time sitting in front of a computer, • Ability to comply with company hybrid work policy of working four days onsite with the option of working the fifth workday at home Company Perks • Vibrant Food Centric Culture, • Comprehensive medical, dental and vision package, • Competitive Salary and Paid Time Off, • Fitness Reimbursement and Well-Being Program, • Corporate Training and Development University, • Collaborative team environment, • Paid Parental Leave, • 401K, • Matching Gifts and Community Volunteer Involvement Compensation and Benefits The salary range for this position is $65,000-$80,000. Placement in the range depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements.

Job Summary The Enterprise Risk Management (ERM) Senior Analyst (ERMSA) is responsible for executing and enhancing the ERM framework for Terumo Medical Corporation. Working closely with the Director of Enterprise Risk Management, the Senior Analyst will help facilitate the identification, prioritization, and evaluation of risks; coordinate ERM activities across the Company; coach risk owners in responding to risks; and ensure the ERM program remains relevant and viable. Job Details/Responsibilities 1. Implement enterprise-wide risk assessments to identify, evaluate and monitor the Company’s risks including internal and external risks, operational and strategic risks, emerging risks, risk interdependencies/relationships, and new industry trends., 2. Partner with internal stakeholders to manage the top risks, develop risk mitigation action plans, and monitor their implementation and progress with cross-functional stakeholders., 3. Develop and maintain ERM dashboards to report top risks, trends, analysis, mitigation plan status and risk management program effectiveness; leverage ERM software platform., 4. Continually monitor, assess, and communicate emerging risks throughout the organization to evaluate the impact of potential new risks., 5. Share company risk management program information to drive collaboration with various business functions and ensure their consistent understanding of risks, application of risk management methodologies; support integration with business decision-making., 6. Other job-related duties as assigned. Knowledge, Skills and Abilities (KSA) • Proven leadership and teamwork skills with demonstrated abilities both to work collaboratively and independently and to influence others, • Highly effective written and verbal communications skills, able to present complex issues simply (in PowerPoint presentations and written reports) and to reach audiences with different perspectives, • Excellent problem-solving techniques and analytical skills Qualifications/ Background Experiences • Bachelor's Degree and minimum 5 years of experience in Enterprise Risk Management and related/similar functions or equivalent combination of education, training and relevant prior work experience., • Experience supporting ERM or business planning programs in a large, complex organization; manufacturing and/or healthcare industry experience is strongly preferred., • Experience with Enterprise Risk Management theory, frameworks and their application is preferred. It is Terumo’s policy to provide equal employment opportunity to all its employees and applicants for employment regardless of their race, creed, color, national origin, age, ancestry, nationality, marital or domestic partnership or civil union status, sex, pregnancy, gender identity or expression, disability status, liability for military service, protected veteran status, sexual orientation, atypical cellular or blood trait, genetic information (including the refusal to submit to genetic testing), or any other category protected by law. As a Company, we value diversity of background and opinion, and prohibit discrimination or harassment on the basis of any legally protected class in the areas of hiring, recruitment, promotion, transfer, demotion, training, compensation, pay, fringe benefits, layoff, termination or any other terms and conditions of employment. Final compensation packages may be higher or lower than what is listed, and will ultimately depend on factors including relevant experience, internal equity, skillset, knowledge, geography, education, business needs and market demand. We provide competitive and comprehensive benefit options which include: annual bonus, paid vacation, paid holidays, health, dental and vision benefits, 401(k), with matching contributions, tax advantage savings accounts, legal plan, voluntary life and AD&D insurance, voluntary long-term disability, short term disability, critical illness and accident insurance, parental leave, personal leave, tuition reimbursement, travel assistance, and an employee assistance program. Pay range: $90,640 - $124,630

Summary We are seeking an experienced Manufacturing Process Engineer with experience in powder-based manufacturing, with a strong chemistry background to lead and optimize manufacturing operations. This role is responsible for the design, improvement, and oversight of production processes, ensuring efficiency, quality, safety, and regulatory compliance. The ideal candidate combines hands-on plant experience with technical leadership, customer interaction, and cross-functional collaboration to drive continuous improvement across operations. Key Responsibilities • Design, develop, test, and improve mechanical systems, equipment, and process applications., • Analyze and optimize chemical and manufacturing processes to increase throughput, improve efficiency, and reduce waste., • Schedule and manage production operations involving blending, milling, drying, and screening equipment for maximum efficiency., • Lead employees across production and technical operations., • Oversee preventive maintenance and downtime activities to ensure operational reliability., • Conduct client laboratory testing, including data intake, feasibility studies, process development, optimization, and final reporting; ensure high client satisfaction., • Perform root cause analysis on process failures and implement corrective and preventive actions., • Manage operational budgets and present performance metrics and financial results to leadership., • Collaborate with operations, R&D, quality, and regulatory teams to implement new or improved processes., • Develop, maintain, and manage technical documentation, including SOPs, certifications, regulatory filings, and compliance records., • Bachelor’s degree in Chemical Engineering, Process Engineering, or a related field., • Minimum of 5+ years of process engineering experience, • Experience in powder-based manufacturing within pharmaceutical, nutraceutical, cosmetic, or chemical industries., • Hands-on experience with laboratory equipment, including particle size analyzers, microscopes, moisture balances, and scales., • Proven ability to work directly with customers and present technical findings., • Strong understanding of chemical engineering fundamentals, including fluid dynamics, thermodynamics, and heat transfer., • Knowledge of industrial electrical control panels and their integration with manufacturing equipment., • Strong regulatory background, with responsibility for maintaining FDA, DEP, EPA, cGMP, SQF, and related programs., • Proficiency with CAD and process simulation software is a plus., • Excellent analytical, problem-solving, and organizational skills.

Company Overview: DIGI America is a leading provider of innovative solutions in the Retail Grocery and Food Industry. We are committed to delivering exceptional products and services that meet the evolving needs of our customers. As part of our strategic growth plan, we are seeking a dynamic and experienced Product Manager to join our team. Position Overview: As a Product Manager, you will play a key role in the go-to-market strategy, cross-functional collaboration, marketing, sales support, and product performance monitoring for the Innovation sector of our retail product line. You will work closely with cross-functional teams including Sales, Marketing, Service, and Operations to deliver high-quality products that meet customer needs and business goals. While this Product Manager position focuses on Innovation, ESL, AiO and our software tied to said products, via cross-training you will also be responsible for other DIGI products such as Wrappers and Scales. Key Responsibilities: • As a key member of the product team the Product Manager will provide market research and analysis, pre-sales analysis, design, and recommendations for customer implementation., • Support our Sales team by relaying knowledge of our products to create documentation and guides for our product listings., • Continued support of our Sales team by traveling to visit with prospects and customers, customer-facing with excellent communication skills in order to present functionality, benefits, and technical specifications of this product line., • Work with our parent company to test and maintain images, files, documentation and knowledgebase articles, in addition to providing feedback on food industry products., • Conduct thorough testing and debugging to ensure the quality and reliability of Innovation, Scale and Wrapper products software releases., • Present and train our sales team members and new employees via onboarding of each product, including testing of each team member., • Update and modify training material for all Innovation related products, including testing questionnaires and open-ended questions., • The Product Manager works to support connectivity between our customers’ business needs and to ensure our products meet these needs to deliver value., • Stay up to date on industry trends, technologies, and regulations related to Innovation related equipment., • Identify market opportunities and competitive landscape trends to influence product direction and maintain a competitive edge., • Work closely with Sales and Marketing teams to ensure product messaging, positioning, and customer experience are aligned., • Engage with customers to understand pain points, needs, and usage patterns through interviews, surveys, and data analysis. Use this information to relay features and improvements back to our parent company., • Support our Service team to deliver successful customer installations with troubleshooting on-site and remotely as needed., • Being the company product expert through speaking engagements and article creation. Basic Qualifications: • Flexibility to regularly rotate through different technical specialist and skill sets., • Ability to thrive on change as products evolve, • The ability to communicate with differing business units from executive level to end users., • Knowledge of PC and/or embedded based systems, • Knowledge of Networking, WiFi, and TCP/IP protocols, • Excellent verbal, written and presentation communications skills, • Travel as required to support sales team with addressable market and customer visits up to 40% Qualifications: • Bachelor’s degree in business, Product Management, Information technology, or other related field, • Excellent communication, written and interpersonal skills, • Creative, strategic, and analytical abilities with strong presentation skills, • Must be able to work in an environment requiring extensive telephone and computer work, • and be able to handle multiple issues simultaneously, • Extensive background in creating market and competitor analysis, • Drive to dig into how a system operates and desire to learn how to manipulate how hardware and software works. Problem solving aptitude, • Strong understanding of product development processes and lifecycle management., • Strong organizational skills with the ability to manage multiple projects simultaneously and prioritize effectively., • Proactive attitude towards learning new technologies and self-improvement., • Ability to work effectively in a fast-paced, dynamic environment and manage multiple priorities simultaneously. Benefits: • Competitive salary, • Comprehensive benefits package (including Health, Dental, Vision, Disability and Life, • Insurance), • Opportunities for career growth and advancement, • Dynamic and collaborative work environment DIGI is an equal opportunity employer and values diversity in the workplace.

Job Title: Manager, Vendor Outsourcing Location: Parsippany, NJ (HM Site); Foster City, CA; Santa Monica, CA Duration: 12 months Hybrid: Onsite 3 days a week - T/W/Th Functional Area: Development Operations, Vendor Outsourcing Position Type: Full Time Equivalent Department: Vendor Outsourcing Client is a research-based biopharmaceutical company founded in 1987. Together we deliver life-saving therapies to patients in need. With the commitment and drive you bring to the workplace every day, you will be part of a team that is changing the world and helping millions of people live healthier, more fulfilling lives. Our worldwide staff is a close community where you can see the tangible results of your contributions, where every individual matters, and everyone has a chance to enhance their skills through ongoing development. As part of our rapidly growing science-driven organization, colleagues at client are revolutionizing healthcare by bringing urgently needed medicines to patients in the areas of Virology, Inflammation and Oncology conditions. We are proud to have some of the most talented colleagues from across the research, healthcare, pharmaceutical, biotechnology & business sectors, working together and supporting each other to help make a real difference to the lives of patients. Client is currently seeking an industry leader for Manager, Vendor Outsourcing within our Development Business Operations department. The Manager will have the opportunity to lead sourcing and contracting for full service CRO contracts within Oncology. This position will be responsible to develop and maintain sourcing plans, as well as sourcing events and contracting in a clinical research environment. This role will be responsible for the sourcing, contracting, including, facilitating vendor selection, RFI, RFP, contracting, and qualification with a focus on CRO services outsourced in support of client clinical trials. The core responsibilities and skills required for this position include but is not limited to: Delivery Excellence • Is an expert in contract management and had a history of implementing and executing category roadmaps and sourcing plans, • Develops global clinical development vendor strategy for a program or therapeutic areas, • Manages contract and sourcing activities for clinical development programs providing consistent customer service and delivering quantitative value through cost savings and transformation/innovation, • Manages the contract negotiation process across the entire life cycle including RFI, vendor identification, RFP, vendor selection decision, contracting negotiation, performance monitoring, change orders, and ensures proper closeout of agreements to maximize contract value and achieve target savings, • Ensure the vendor selection process is compliant by managing risks, • Partners with other functions such as Compliance, Legal and Regulatory as necessary, • Collaborates with internal customers in vendor bidding and proposal development (RFP creation and analysis), • Partners with internal customers to develop study specifications and leverages benchmarking tools as appropriate, • Translates business requirements into vendor capabilities and develops recommendations for vendor selection for a program or therapeutic area, • Is an SME in resolving complex issues relating to contract negotiation and management?, • Oversees the identification, selection and management of global external service providers, • Leads Vendor bid defense meetings, • Manages the contract negotiation process for complex or high value contracts, • Demonstrates strong understanding of regulatory and legal issues pertinent to clinical development, • Is project focused and works with a sense of urgency Strategic Thinking • Ability to understand, analyze and develop recommendations from multiple complex sources such as financial and operational perspectives, • Influence vendor selection with stakeholders at the project team level Innovation • Identifies, develops, and deploys best practices in vendor selection, cost containment, and category management practices, • Leverages prior experience with external benchmarking, industry best practices, and technology for continuous improvement Problem Solving • Takes ownership of issues from problem identification to successful resolution, testing recommendations for reasonableness, • Triages study-level vendor management issues; escalates high-risk issues to appropriate stakeholders, • Translates trends in operational and systematic issues and develops solutions with sustainability in mind to ensure roadblocks are removed during study start-up Influence and Partnership • Engage with study team leadership to drive sourcing strategy, compliance, and continued partnership, • Exhibits competency in regularly establishing relationships with internal and external cross functional teams, such as clinical operations, legal, finance, compliance, • Partners with internal stakeholders working on contracts in resolving complex issues relating to contract negotiation or management, • Manages study level vendor relationships in conjunction with Clinical Operations Decision Making • Delivers value by developing business solutions by translating requirements into effective sourcing solutions, contractual terms and process improvements, • Asks probing questions to uncover business needs and recommends solutions (e.g., negotiating timelines while maintaining standards), • Demonstrated ability to make critical decisions related to clinical vendor agreement negotiations and escalations, • Consolidates data across functions according to business requirements and recommends vendors to senior leadership for endorsement, • Resolves vendor project management issues (e.g., operational challenges including scoping issues) by identifying and addressing deviations from established protocols, • Identifies operational and systematic issues, including frequency and escalates to the appropriate level Communication • Excellent communication skills and comfort level interacting with internal and external teams across all levels, including regular interface with stakeholders and leadership team members, • As necessary, trains internal stakeholders in contract budgeting, development, and administration Capabilities and Requirements • Experience in providing thought leadership and consistent customer service, • Expertise in the end-to-end sourcing and contracting process, including RFx, contract negotiation and change order management, • Demonstrates an in-depth knowledge of the clinical research process and the regulatory environment across functions, • Demonstrated leadership skills while working in fast paced and changing environment, • Financial acumen to review, analyze and understand cost drivers of complex budgets, • Legal, clinical operations and regulatory acumen Knowledge, Experience and Skills: • Relevant experience with a BA or MS in a relevant discipline, • MBA or JD preferred, • PMP/CPSM certification or equivalent a plus, • 5+ years of relevant experience

About Us United Premium Foods is an equal opportunity employer who wishes to hire motivated individuals to join our team working in our food production and cold storage facility. We are a fast-growing manufacturer of superior quality food (protein-based) products and provider of cold storage services. We are dedicated to delivering exceptional food processing solutions that prioritize quality, safety and superior customer service. Our commitment to excellence is evident in our New Jersey based facility, which is USDA and FDA Level 2 certified, and in our rigorous processes designed to meet stringent safety and food safety regulations. About the Role We are seeking a dynamic and experienced Food Safety and Quality Manager with strong customer relationship and communication skills as well as extensive experience in leading and managing teams to establish high standards for food production facilities. The ideal candidate will implement robust quality control protocols, maintain a compliant food safety environment, and oversee sanitation protocols. This candidate must possess a strong understanding of FDA and USDA regulations, as well as experience in quality system management. In this role, you will provide leadership to the food safety and quality team, guiding them to uphold best practices and achieve excellence. The candidate will develop, implement, and maintain food safety and quality SOPs and lead training initiatives for teams in established practices. The Food Safety and Quality Manager will manage team accountability for audit readiness, handle customer inquiries, administer lab results, and drive process improvement programs related to food safety and quality. This leadership role requires proactive troubleshooting skills to resolve quality assurance challenges, implement timely corrective actions, and develop preventative measures that align with company standards. Responsibilities The Food Safety and Quality Manager is responsible for leading and overseeing all aspects of food safety and quality assurance within the production facility. This role works closely with the plant’s management team—including production, operations, and facilities maintenance—to enforce rigorous cleaning and sanitation schedules, develop a high-performance team, and uphold the highest standards of food safety and quality. Additionally, the manager leads coordination with third-party vendors, labs, USDA inspectors, and auditors to ensure full compliance with federal, state, local, and organizational regulations and policies. The role involves daily leadership and oversight of food quality processes, managing team inspections and assessments, implementing HACCP principles, maintaining thorough quality records, and addressing any potential hazards to ensure ongoing compliance and operational excellence. • Oversee and manage quality control systems: Implement and maintain a robust quality management system to monitor product quality at every stage of production., • Lead inspections and audits: Perform and delegate regular internal inspections and audits of the production process, equipment, and facilities to ensure compliance with safety and quality standards., • Develop and manage strong Customer Relations: Foster trust and credibility, as well as maintain strong rapport with customer QA teams., • Lead and manage corrective and preventive actions (CAPA): Identify potential hazards, address non-compliance issues, and implement corrective and preventive measures to resolve quality and safety concerns., • Collaborate with and lead cross-functional teams: Work closely with production, operations, and maintenance teams to integrate food safety and quality practices into day-to-day operations., • Establish, oversee, and lead sanitation and cleaning processes: Lead the execution of strict cleaning and sanitation schedules to ensure a hygienic production environment., • Train and mentor staff on food safety and quality standards: Develop and deliver training programs to ensure all employees understand and follow food safety and quality policies and procedures., • Oversee product testing and lab results: Manage lab testing of raw materials, in-process products, and finished goods to verify adherence to quality and safety standards., • Develop, implement, and lead food safety protocols: Establish and maintain food safety programs, including HACCP, to ensure compliance with regulations and industry standards., • Ensure audit readiness and team preparedness: Prepare and maintain all necessary documentation and records for third-party and regulatory audits., • Drive continuous improvement within the team: Lead initiatives to enhance food safety and quality processes, including monitoring trends and implementing industry best practices., • Maintain thorough SOP documentation and team adherence: Ensure that all records related to food safety and quality, such as inspection reports, ATP swabbing, audit results, and compliance documentation, are accurate and up to date. Qualifications • Bachelor’s degree in food science, microbiology, chemistry, or related field., • Minimum of 8+ years of experience in a leadership role within food safety, quality assurance, or quality control within a food production environment., • In-depth knowledge of food safety regulations and standards (HACCP, GMP, FDA, USDA, FSMA)., • HACCP certification required (Preventive Controls Qualified Individual or SQF practitioner is preferred)., • Proven leadership ability with a strong work ethic, capable of mentoring, guiding, and managing cross-functional teams in food safety and quality practices., • Bilingual in Spanish is a plus. Working Conditions • Food manufacturing environment and cold storage warehouse. Ability to commute/relocate: • Woodbridge, NJ 07095: Reliably commute or relocate before starting work (Required).

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Bulk Technician driver operates tractors and vacuum trailers servicing municipal, industrial and commercial customers with non-hazardous bulk liquid transportation and disposal services. Execute local pick up and deliveries Monday through Friday, work some weekends but always be home for the end of the day! Responsibilities: • Transport sewerage sludge, industrial wastewater, groundwater and other non-hazardous bulk liquids from customer loading facilities to designated treatment facilities for disposal, • Transport sanitary wastewater and grease trap waste from company owned and operated transfer stations to designated treatment facilities for disposal., • Operate vehicle PTO (power take off) to run vehicle mounted rotary vein vacuum pump to safely load liquids onto vacuum trailer., • Safely drive vehicle on customer property, public roadways and treatment facilities by obeying all traffic and safely laws., • Deploy safety cones and take necessary precautions as required., • Work with company dispatchers, operations managers, safety personnel and customer contact to execute assigned work according to company work plan., • Complete vehicle pre-trip and post-trip inspections daily and immediately report deficiencies to on duty supervisor., • Carefully review daily work assignment to insure instructions are clear and immediately report deficiencies or questions to on duty supervisor., • Wear company issued uniform, safety vest, steel-toed boots, hardhat, safety glasses, hearing protection and any other personal protective equipment as necessary., • Successfully interface with company issued tablet and associated applications including but not limited to those used for hours of service, taking photographs, updating work orders, etc., • Immediately report spills, accidents, injuries, changes in scope of work or any other instance that is beyond the normal course of duty., • Never leave the tractor and trailer unattended while loading and unloading., • Properly execute company work orders and disposal manifests by capturing all necessary dates, times, signatures, waste types and any other necessary information in order to properly execute the assigned work., • Attend regular safety meetings, gate checks, training and other mandatory meetings assigned by on site supervisor., • Follow additional instruction from supervisor as assigned. Qualifications:, • Ability to multi-task and work independently while being safety conscious., • Ability to read and follow map books and or use mapping technology., • Class A Commercial Driver's License, • Tanker and Airbrake Endorsement Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $28.59 – $40.03 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: Technician-Fence (Fence Technicians) loves to drive a truck filled with fencing materials to designated work sites. Our customers expect fast and timely service, so it's important you are customer focused. You will also install the fence into the ground using a "kittyhawk." Responsibilities: • Conduct daily inspection of all tools assigned to the truck to ensure safety and proper working condition, • Check loads to ensure that truck has all material (fence panels, poles, etc.) and tools needed to complete service tickets, • Conduct daily pre-shift vehicle inspection & report deficiencies to shop immediately, • Operate fence vehicle to and from pre-designated work sites, • Unload all fence materials and install fence panels, with appropriate tools, at work site in accordance with pre-determined specifications. Locate, measure and mark location for placement of panels & installation, • Coordinate the workload and the efforts of the Fence Helper. Examine and inspect work progress, equipment & work site to ensure that specifications are met, • Meet with site superintendent (or other designated representative) to confirm work order. Maintain telephone or radio contact with supervisor to receive additional instructions, changes to work locations, etc, • Record information such as personnel, production and operational data on specified forms and submit to Fence Manager at end of each shift, • Train Fence Helper on proper installation procedures, safety protocol, etc, • Perform other duties as assigned Qualifications:, • Minimum two years of commercial driving experience., • Valid Driver's license., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills., • Ability to meet deadlines. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $20.42 – $27.57 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Labcorp is seeking a Phlebotomist to join our team in East Brunswick, NJ. This position will cover two locations in East Brunswick, NJ Work Schedule: Monday, Wednesday, Thursday and Friday 9:00am-5:30pm and alternating Saturdays 7:30am-1:00pm Job Responsibilities: * Perform blood collections by venipuncture and capillary techniques for all age groups * Collect specimens for drug screens, paternity tests, alcohol tests etc. * Perform data entry of patient information in an accurate and timely manner * Process billing information and collect payments when required * Prepare all collected specimens for testing and analysis * Maintain patient and specimen information logs * Provide superior customer service to all patients * Administrative and clerical duties as necessary * Travel to additional sites when needed Minimum Qualifications: * High school diploma or GED or equivalent * 6 months or more experience as a phlebotomist Preferred Qualifications: * 1 year or more of phlebotomy experience Additional Job Standards: * In lieu of work experience, a Phlebotomy certification or completed training program must come from an accredited agency * Proven track record in providing exceptional customer service * Strong communication skills; both written and verbal * Ability to work independently or in a team environment * Comfortable working under minimal supervision * Reliable transportation * Flexibility to work overtime as needed * Able to pass a standardized color blindness test At Labcorp we have a passion for helping people live happy and healthy lives. Every day we provide vital information that helps our clients and patients understand their health. If you are passionate about helping people and have a drive for service, then Labcorp could be a great next career step! Phlebotomist will work in either a Patient Service Center or Client office. In this role you will provide exceptional customer service, perform skilled specimen collections and be the face of the company. In addition, you will be provided opportunities for continuous growth within the organization. **Pay Range: $17.75 - $24.00 per hour All job offers will be based on a candidate’s skills and prior relevant experience, applicable degrees/certifications, as well as internal equity and market data Phlebotomist’s may be eligible for participation in the PST Incentive Plan, which pays a quarterly bonus based on performance metrics. Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Employees regularly scheduled to work less than 20 hours, Casual, Intern, and Temporary employees are only eligible to participate in the 401(k) Plan. Employees who are regularly scheduled to work a 7 on/7 off schedule are eligible to receive all the foregoing benefits except PTO or FTO. For more detailed information, please click here. If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today! Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.

JOB DESCRIPTION: • Define and communicate ERP roadmap aligned with company objectives., • Manage and mentor ERP analysts and product owners; foster a culture of continuous improvement, • Oversee ERP system upgrades, maintenance, and performance optimization., • Develop and manage project plans, budgets, and timelines for ERP initiatives., • Collaborate with business units, IT, and external partners to design and deliver solutions., • Manage ERP licensing, monitor usage, and optimize costs., • Analyze upcoming releases, assess impacts, and communicate changes to stakeholders., • Lead release planning, testing, and deployment of updates and new features., • Act as liaison between ERP team and stakeholders; represent company in dealer groups., • Coordinate training, documentation, and user support for new functionality., • Monitor feedback and business outcomes, drive enhancements for efficiency and satisfaction., • Maintain automated test libraries and quality assurance processes. RECOMMENDED QUALIFICATIONS: • Bachelor's degree in Information Technology, Computer Science, Business Administration, or a related field., • Proven experience in ERP system management, implementation, and maintenance., • D365 experience is a must., • Excellent project management skills, with the ability to manage multiple projects simultaneously., • Strong analytical and problem-solving skills., • Excellent written and verbal communication skills., • Solid organizational skills, including attention to detail and multitasking skills., • Knowledge of data security and compliance regulations. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Labcorp is seeking a Phlebotomist Float to join our team in Edison, NJ. Work Schedule: Monday – Friday, scheduled hours vary between 7:00am-10:00pm and rotating Saturdays Job Responsibilities: * Perform blood collections by venipuncture and capillary techniques for all age groups * Collect specimens for drug screens, paternity tests, alcohol tests etc. * Perform data entry of patient information in an accurate and timely manner * Process billing information and collect payments when required * Prepare all collected specimens for testing and analysis * Maintain patient and specimen information logs * Provide superior customer service to all patients * Administrative and clerical duties as necessary * Travel to additional sites when needed. Minimum Qualifications: * High school diploma or GED or equivalent * 1 year or more experience as a phlebotomist Preferred Qualifications: * 1.5 years or more of phlebotomy experience * experience as a phlebotomist in a pediatric and or OBGYN office * bilingual in English/Spanish Additional Job Standards: * In lieu of work experience, a Phlebotomy certification or completed training program must come from an accredited agency * Proven track record in providing exceptional customer service * Strong communication skills; both written and verbal * Ability to work independently or in a team environment * Comfortable working under minimal supervision * Flexibility to work overtime as needed * Able to pass a standardized color blindness test * Valid Driver’s License and clean driving record with reliable transportation * Be at least 21 years’ old At Labcorp we have a passion for helping people live happy and healthy lives. Every day we provide vital information that helps our clients and patients understand their health. If you are passionate about helping people and have a drive for service, then Labcorp could be a great next career step! As a Float Phlebotomist, you will have the opportunity to quickly gain a vast amount of experience. You will be working with a variety of patients, team members, and clinics/locations. This unique role will allow you to develop your skills and set you up for opportunities and continuous growth within the organization. If you like variety, this role is perfect for you! **Pay Range: $17.75 - $25.00 per hour All job offers will be based on a candidate’s skills and prior relevant experience, applicable degrees/certifications, as well as internal equity and market data Phlebotomists may be eligible for participation in the PST Incentive Plan, which pays a quarterly bonus based on performance metrics Float Incentive: Additional $1.00/hr plus mileage reimbursement Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Employees regularly scheduled to work less than 20 hours, Casual, Intern, and Temporary employees are only eligible to participate in the 401(k) Plan. Employees who are regularly scheduled to work a 7 on/7 off schedule are eligible to receive all the foregoing benefits except PTO or FTO. For more detailed information, please click here. If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today! Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.

Labcorp is seeking a Phlebotomist to join our team in Edison, NJ. Work Schedule: Monday 12:00pm-6:00pm Tuesday 1:00pm-7:30pm Wednesday 12:00pm-6:00pm Thursday 12:00pm-6:00pm Friday 8:00am-4:30pm Saturday 8:00am-1:00pm Job Responsibilities: * Perform blood collections by venipuncture and capillary techniques for all age groups * Collect specimens for drug screens, paternity tests, alcohol tests etc. * Perform data entry of patient information in an accurate and timely manner * Process billing information and collect payments when required * Prepare all collected specimens for testing and analysis * Maintain patient and specimen information logs * Provide superior customer service to all patients * Administrative and clerical duties as necessary * Travel to additional sites when needed Minimum Qualifications: * High school diploma or GED or equivalent * 6 months or more experience as a phlebotomist Preferred Qualifications: * 1 year or more of phlebotomy experience Additional Job Standards: * In lieu of work experience, a Phlebotomy certification or completed training program must come from an accredited agency * Proven track record in providing exceptional customer service * Strong communication skills; both written and verbal * Ability to work independently or in a team environment * Comfortable working under minimal supervision * Reliable transportation * Flexibility to work overtime as needed * Able to pass a standardized color blindness test At Labcorp we have a passion for helping people live happy and healthy lives. Every day we provide vital information that helps our clients and patients understand their health. If you are passionate about helping people and have a drive for service, then Labcorp could be a great next career step! Phlebotomist will work in either a Patient Service Center or Client office. In this role you will provide exceptional customer service, perform skilled specimen collections and be the face of the company. In addition, you will be provided opportunities for continuous growth within the organization. **Pay Range: $17.75 - $24.00 per hour All job offers will be based on a candidate’s skills and prior relevant experience, applicable degrees/certifications, as well as internal equity and market data Phlebotomist’s may be eligible for participation in the PST Incentive Plan, which pays a quarterly bonus based on performance metrics. Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Employees regularly scheduled to work less than 20 hours, Casual, Intern, and Temporary employees are only eligible to participate in the 401(k) Plan. Employees who are regularly scheduled to work a 7 on/7 off schedule are eligible to receive all the foregoing benefits except PTO or FTO. For more detailed information, please click here. If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today! Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.

Job DescriptionDescription: We are searching for Industrial Maintenance Technician to join our Maintenance Team! Our Associates enjoy full-time hours, job stability and job growth. We take care of you, as you help us take care of thousands of medical patients and providers. What You'll Do: Working under limited supervision, the Black Seal Operator has hands-on experience with high-pressure boilers, as well as a working knowledge of sump pumps and water heater installations. This position is responsible for performing skilled work in the following areas: mechanical, electrical, pneumatic, plumbing, boiler, wastewater and general maintenance of equipment/structures and resolving emergency situations by taking appropriate corrective action and completing the repairs needed to ensure that systems are operational and are functioning safely and efficiently. • Operate, maintain, and troubleshoot high-pressure steam and hot water boilers in compliance with state and local codes., • Conduct routine inspections, diagnostics, and preventive maintenance on boiler systems, burners, and associated controls., • Monitor boiler readings, maintain logs, and ensure optimal performance and energy efficiency., • Install, service, and repair water heaters (gas and electric) as needed., • Maintain, troubleshoot, and replace sump pumps, including float switches, check valves, and discharge piping., • Perform water treatment testing and adjust chemical feed systems to maintain proper water quality., • Respond promptly to emergency calls and troubleshoot mechanical, plumbing, and heating issues during on-call hours., • Ensure compliance with Black Seal high Pressure Boiler Operator licensing requirements and safety standards., • Assist with general facility maintenance as directed, including light plumbing, electrical, and HVAC support., • Valid Black Seal high Pressure Boiler Operator License in New Jersey, • Minimum 3 years of experience operating and maintaining low-pressure boilers, • Hands-on experience with sump pump systems and water heater installation/repair, • Ability to read and interpret technical manuals, blueprints, and schematics, • Strong understanding of safety regulations, codes, and emergency procedures, • Valid driver’s license and reliable transportation, • Ability to work independently and as part of a team, • Typically requires accreditation from a technical school or an applicable skilled trades program and 7 to 10 years of industrial maintenance experience or the equivalent., • Equipment Maintenance, Technical Understanding, Technical Zeal, Deals with Uncertainty, Basic Safety, Power Tools, Attention to Detail, Flexibility, Supervision, Job Knowledge, Productivity, • Must have a working knowledge of AC and DC circuits with the ability to work on voltages ranging from 5 Volt DC to 480 Volt AC. Must be able to fluently read mechanical and electrical blueprints, • Must possess the knowledge to operate basic computer software such as Word, Excel, and Outlook as well as work with a Computerized Maintenance Management System., • Required to provide own set of tools., • Must have a valid driver license. Why Work with Us? Competitive Starting Wage Comprehensive Benefits including: Medical, Dental, and Vision Insurance 401k with Company Match Paid Time Off & Paid Holidays Quarterly Customer Service Bonus Program Company Paid Life Insurance Employee Assistance Program Nixon Medical is proud to partner with WorkStep, a cutting-edge text messaging-based associate feedback platform, to drive an amazing culture of associate engagement and continuous improvement. We believe to grow and create opportunities that enrich each other’s lives, opportunities must be available to all. Our commitment to having a diverse, equitable, and inclusive workforce will strengthen our progress to continue offering long-term career opportunities while providing best-in-class solutions for our customers. Nixon Medical is an equal opportunity employer #IND2

Job Description Company Introduction Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. TSE is a Minority Based Enterprise (MBE) for multiple states and has a major focus on providing energy engineering support for decarbonization initiatives. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary We are searching for a dynamic Technical Director to join us in our Woodbridge, N.J. office and will play a crucial role in driving technical solutions to support the growth of the company. This role will run both internal IT resources, while developing an energy management system for our customers. A strong technical background, particularly in enterprise platforms, is required, with a focus on experience in guiding teams through the implementation of large-scale, complex IT solutions. The role demands deep knowledge of hardware solutions and software architecture, design patterns, and best practices for scalable, maintainable systems. The ideal candidate will have a proven track record of aligning technical execution with business objectives, strong communication skills, and the ability to work effectively with clients, executives, and technical teams. This position involves identifying and qualifying potential vendors, solutions, and building a team and platforms to drive our growth in the future. The ideal candidate will help drive systems that support engineering monitor buildings while creating an IT team that is a central part of the strategy of the company. They are a motivated self-starter with excellent communication skills and the ability to thrive in a fast-paced, client-focused environment driving the successful adoption of our IT platform and tools. Essential Job Functions • Review current IT infrastructure and solutions including platforms, support, and critical needs., • Driving innovation around building automation, M&V, and building controls., • Help create overall blueprint and drive the execution in support of the IT and tool-based strategy., • Work with clients and vendors to interact with systems and drive automation of processes and tools., • Determine and achieve SMART goals for IT systems., • Oversee deployment and upgrades of IT hardware and software., • Develop cybersecurity strategy and eliminate security risks and vulnerabilities., • Oversee IT help desk., • Handle capacity planning., • Manage outsourced IT staff including when to hire., • Prepare financial budgets and present proposals to executives and stakeholders., • Coordinate IT tasks, e.g., software updates, to ensure maximum availability and minimal downtime., • Work with external vendors and advisors., • Manage networking, development, and disaster recovery processes., • Communicate with other departments timely and efficiently on all IT matters of concern. Qualifications • Bachelor's degree or equivalent experience is required. Advanced degree, ITIL, CISSP, preferred., • Demonstrated experience in managing IT infrastructure and IT Vendors., • Knowledge of Building Management Systems (BMS) and Building monitoring systems preferred., • Deep understanding of IT systems, software development, and cybersecurity., • Several years of experience in IT roles, with a significant portion in management or leadership positions., • Ability to lead teams, manage projects, and align IT strategies with business goals., • Preference for experience building interactive systems including rollouts. Strong analytical skills to troubleshoot and resolve technical issues., • Strong project management skills with the ability to set priorities, collect and document project requirements, successfully handle multiple projects simultaneously, and meet deadlines in a fast-paced environment., • Ability to maintain and operate personal and/or company vehicles with a valid driver’s license. Must be willing and able to travel within the tri-state area., • Provide clarity in complex problems, facilitate decision-making, and guide high value investments., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Excellent written and verbal communication skills., • Self-starter who can work independently or within a team environment., • Exceptional organizational, time-management, and planning skills., • Interest and experience in energy conservation and engineering a plus., • Understanding systems and processes for tracking projects in facilities, HVAC and lighting, with additional expertise in design-build and audit processes is highly advantageous. Knowledge, Skills, and Abilities • Extensive IT systems knowledge and understanding., • Awareness of market trends, IT solutions, industry developments, and best practices., • Knowledge of various online systems and tools., • Ability to review requirements, costs, and existing tools, and make recommendations to executive team and then drive technical solutions., • Proficiency in Microsoft tools, CRM software, programming, hardware, etc., • Being open to feedback and continuous improvement. Physical Demands of the Job • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, mechanical and electrical rooms, rooftop, moving vehicles, and electrical current. Diversity TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSE makes hiring decisions based solely on qualifications, merit, and business needs at the time. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Benefits • Medical, vision, dental insurance and more., • 401(k) with company match after 1st year anniversary., • Company-provided life insurance., • Health Savings Account (HSA), • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Federal Holidays. Work Schedule • Monday through Friday, 8:00 a.m. to 5:00 p.m., • 40-hour work week, in office., • Occasional weekends., • On-call requirement.

Job Description We’re hiring a bilingual (English/Spanish) Manufacturing Site Leader to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Manufacturing Site Leader is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Manufacturing Site Leader is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description We’re hiring a bilingual (English/Spanish) Operations Manager to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all manufacturing site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Operations Manager is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Operations Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description We’re hiring a bilingual (English/Spanish) Manufacturing Manager to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Manufacturing Manager is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Manufacturing Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description Company Introduction Tri-State Energy (TSE) is a 40-year is a client-focused energy solutions provider committed to delivering engineering-driven strategies that improve facility performance, reduce operational and maintenance costs, and provide long term reliable solutions by seamlessly combining technical engineering with project implementation. We focus on providing energy engineering and MEP contracting support for decarbonization initiatives. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary We are seeking an experienced and dynamic Marketing Manager in our Woodbridge, N.J. facility to lead and shape the marketing efforts for our utility programs and the company overall. The ideal candidate will develop and execute a comprehensive strategic marketing plan to enhance brand awareness, drive customer acquisition, and support revenue growth. This leadership role requires a creative thinker with strong management capabilities and a proven track record in marketing execution. The ideal candidate will have a proven track record of aligning execution with business objectives, strong communication skills, and the ability to work effectively with clients, executives, sales, and operational teams. Essential Job Functions • Continuous Improvement & Reporting: Evaluate the effectiveness of marketing activities by sharing and tracking current market trends and research and using data-driven insights to optimize strategies., • Client & Stakeholder Engagement: Build and maintain strong relationships with clients, partners, vendors, and industry stakeholders to enhance marketing impact and drive program success. Create overall blueprint and drive the execution of client projects., • Collaboration & Cross-Functional Alignment: Work closely with sales, operations, and executive teams to ensure marketing initiatives align with business goals. Lead, mentor, and motivate a high-performing marketing team., • RFP Oversight: Responsible for the preparation and timely delivery of responses to Request for Proposals (RFPs), ensuring accuracy and adherence to client specifications., • Social media & Digital Presence: Develop and execute digital marketing campaigns that engage and grow our internal and external audience base., • Strategic Planning & Execution: Help develop and implement marketing strategies that align with business objectives, ensuring measurable growth in brand awareness, customer acquisition, and revenue., • Brand Development & Messaging: Help oversee and refine TSE brand positioning and messaging to ensure consistency across all channels including digital, print, and social media platforms. Work closely with internal teams to craft compelling narratives that resonate with target audiences., • Team Management: Manage marketing vendors., • Budget Management: Responsible for structuring and managing company marketing budget with a focus on allocation of resources to effectively maximize the return on investment (ROI) and ensure marketing campaigns are executed within budgetary constraints. Provide regular budget forecasts, ensure the efficient use of resources, and adjust strategies as needed. Qualifications • Bachelor’s degree in Marketing, Business Administration, Communications, or a related field (Master’s degree preferred)., • Minimum of 4-8 years of experience in marketing, with at least 2 years in a lead role., • Experience with RFPs, brand management, social media, digital marketing, and content marketing preferred., • Strong ability to manage marketing projects, personnel, and vendors to drive marketing messaging., • Awareness of market trends, lighting, construction, and contracting best practices., • Experience with energy, sustainability, engineering, construction, and utility programs desired., • Ability to self-manage and prioritize multiple tasks and deliverables,, • Outstanding written and verbal communication, active listening, and presentation, editing and interpersonal skills,, • Strong attention to detail with excellent analytical and judgment capabilities,, • Ability to effectively work independently and in a team environment with multiple concurrent deadlines., • Proficiency in Microsoft Word, Excel, PowerPoint and Outlook, Adobe Acrobat/Reader, Photoshop, InDesign, and Illustrator. Knowledge, Skills, and Abilities • Knowledge of marketing in an engineering, contracting, or professional services firm is a plus., • Required knowledge of marketing processes and tools., • Ability to review requirements, costs, and existing tools to provide recommendations to executive team and then drive solutions., • Being open to feedback and continuous improvement., • Proven ability to manage budgets and deliver results within set timelines., • Creative thinker with a strategic mindset and strong analytical skills., • Ability to thrive in a fast-paced, dynamic environment., • Provide clarity in complex problems, facilitate decision-making, and guide marketing investments., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Self-starter who can work within a team environment to drive results., • Exceptional organizational, time-management, and planning skills., • Knowledge of marketing processes and tools relevant to engineering, construction, or professional services firms is a plus., • Strong understanding of market trends, customer needs, and industry-specific best practices (e.g., lighting, construction, sustainability). Physical Demands of the Job The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of marketing materials. Work Environment • The employee is subject to both inside and outside environmental conditions. Screening TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSE makes hiring decisions based solely on qualifications, merit, and business needs at the time. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Benefits • Medical, vision, dental insurance and more., • 401(k) with company match., • Company-provided life insurance., • Health Savings Account (HSA)., • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Federal Holidays. Work Schedule • Hybrid Work Schedule., • Monday through Friday, 8:00 a.m. to 5:00 p.m., though some supervisory work will occur on the 2nd or 3rd shift., • 40-hour work week., • Occasional weekends., • On-call requirement., • Some travel required, as needed.

Job DescriptionAudit Manager Audit Manager Position Overview We are seeking a seasoned Audit Manager to lead audit engagements across real estate, mortgage banking, asset management, and specialty finance portfolios. The Audit Manager will plan, execute, and deliver high-quality internal and external audit services, ensuring compliance with GAAP and company policies, identifying control weaknesses, and recommending practical improvements. This role requires strong technical accounting skills, proven supervisory experience, and the ability to communicate findings to senior management and stakeholders. Key Responsibilities • Lead and manage multiple audit engagements from planning through reporting for real estate, mortgage banking, asset management, banking, and specialty finance business lines., • Develop audit plans, risk assessments, and testing strategies aligned with GAAP, regulatory requirements, and internal policies., • Supervise, mentor, and develop audit staff; assign work, review deliverables, and provide constructive feedback to build team capability., • Evaluate internal controls, accounting processes, and financial reporting to identify control gaps, operational risks, and opportunities for process improvement., • Prepare clear, timely audit reports and presentations for senior management and audit committees, including actionable recommendations and remediation plans., • Coordinate with external auditors, regulatory examiners, and business leaders to facilitate audits, respond to inquiries, and support remediation efforts., • Bachelors degree in Accounting, Finance, or related field; Masters degree or equivalent a plus., • Certified Public Accountant (CPA) required., • Minimum 5 years of audit experience, including progressive supervisory responsibilities; experience in public accounting or internal audit roles preferred., • Deep technical knowledge of GAAP and experience applying accounting standards to complex transactions common in real estate, mortgage banking, asset management, and specialty finance., • Strong understanding of loan accounting, securitizations, servicing, property accounting, valuation, and investment structures., • Excellent analytical, communication, and stakeholder management skills, with the ability to present complex findings to senior leadership., • Proven ability to manage multiple priorities, meet deadlines, and drive audit engagements to completion with high quality and integrity. - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/03/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description SCHOOL BUS COMPANY SEEKING FLEET MECHANIC Must be Dependable, Knowledgeable and Willing to Work Hard Responsibilities Include But Are Not Limited To: Must Be Able To Diagnose and Perform Routine, Annual, Preventive Maintenance and Repair Services on Gas and Diesel School Buses Performing Annual and Routine Maintenance Assist With DMV Bi-Annual Inspections / Motor Vehicle Bi-Annual Inspections Qualifications · Experience Preferred · Compensation Based On Experience Requirements: · Mandatory Background and Motor Vehicle Background Check · Pass a Drug Test and have a Current TB Test · Comply With Company Policies and Regulatory Requirements · Valid Drivers’ License - CDL W/ Mechanic Endorsement a Plus · Knowledge of Inspections, Diagnostic Testing, and Electrical · Computer Literate – Can Use Diagnostic / Reporting and GPS Applications Benefits Dapper offers you: Health, Dental, Vision, Credit Union, and Company Matched 401k Plan We are Looking for Someone LONG TERM We are willing to train the right candidate Full-Time / EOE Come Join The Dapper Team! Come in ANYTIME or download our application at 999 Riverside Drive, Keasbey, NJ. 08832 – Ask for Mark Please Visit For a Copy of Our Application George Dapper, Inc. Is Committed To Transporting Your Children Safely!

Job Description Outside Sales Representative - Security and Fire Protection Systems Provider - Total Compensation to 120k/year - Somerset, NJ • Our client is a family owned full-services fire protection and security services company. They sell, install, and inspect/ maintain alarm systems, access control, suppression systems, SCBA, gas detection, sprinkler systems, CCTV, fire extinguishers, etc. Their potential client base is anyone with a physical business location, and they provide one time and recurring services for commercial, municipal, and especially industrial customers throughout New Jersey and beyond., • Drive net-new revenue across fire protection and security service lines through proactive prospecting, • Hunt for new business within assigned territory using multi-channel outreach, • Generate leads, qualify prospects, and secure appointments with decision-makers, • Present and sell full portfolio of solutions including fire alarms, sprinklers, suppression systems, monitoring, access control, CCTV/video, intrusion, inspections & testing contracts, • Conduct on-site walkthroughs and system assessments to identify compliance, security vulnerabilities, and upgrade opportunities, • Maintain an organized funnel and pipeline strategy to ensure consistent opportunity creation, • Log all communication, appointments, quotes, and follow-ups inside CRM for transparency and accountability, • Prepare and deliver proposals for inspections, maintenance, monitoring agreements, retrofits, and new system installations, • Follow up persistently on aging quotes, open opportunities, and competitive bids until closed-won or closed-lost, • Leverage professional networks, chamber events, trade associations, safety groups, and community relationships for lead generation, • Build relationships with facility managers, business owners, general contractors, EHS/Safety teams, property managers, IT/security directors, and AHJs, • Coordinate with operations, design, and engineering to scope projects and ensure seamless handoff of awarded work, • Develop strong knowledge of code compliance (NFPA, IBC, NEC), AHJ requirements, and industry standards for both fire and security, • Attend industry events, trade shows, and technology demonstrations to stay up to date on evolving solutions and market needs, • Meet and exceed established KPIs including outbound call volume, LinkedIn outreach, in-person touches, new meetings set, and proposal output, • Hit sales quotas consistently through disciplined prospecting cadence, strong closing ability, and ongoing funnel management, • Uphold a high level of professionalism, urgency, integrity, and consultative problem-solving in every interaction, • Prior experience in the security or fire protection industry required, • Outside sales experience required, • Ability to travel to customer sites throughout the Northern NJ and NYC territory, • Base salary in the 65k - 75k/year range plus commission, taking total compensation to 110k – 120k/year during ramp up year, • Uncapped commission, • Medical insurance, • 401k with 3% employer contribution (safe harbor), • 3 weeks PTO, • Car allowance, mileage reimbursement #INDALL #zr

Job DescriptionScismic is supporting the growth of the most respected legacies in American industry, known for pioneering breakthroughs in optical technologies! With a proven history of industry firsts—including application-specific fibers, optical connectors, ribbon cables, erbium-doped fibers, Raman fiber lasers, and fiber gratings - Company is commited to delivering cutting-edge optical innovations and solutions by designing, manufacturing and supplying the high performance optical fibers, fiber cable and components and devices. Their mission is to advance communication technology while providing exceptional service that drives value for customers, employees, and shareholders. We seek a highly motivated and skilled Preform Assembly R&D Engineer to support the company’s optical fiber program in Somerset, NJ. Core focus includes - Stack and assemble glass preforms, operate latches, and maintain cleanliness in a cleanroom manufacturing process. The role offers the opportunity to advance optical fiber processing technology and have a significant impact on new product innovation. The ideal candidates will be responsible for equipment and process design and troubleshooting, and innovate in optical fiber fabrication techniques in collaboration with cross-functional teams at multiple locations. In this role, the candidates will support R&D programs to advance optical fiber science and technology for programs serving the medical, aerospace, and telecommunications industries. Essential Duties and Responsibilities include, but are not limited to: • Be a critical asset in leading an R&D program to advance optical fiber technology, including overseeing and contributing to development and innovation in optical fiber fabrication to improve performance, quality, reliability, and scalability., • Investigate the relationship between process parameters, fiber properties, and manufacturing outcomes, and guide technicians and engineers in conducting process trials and experiments to achieve project milestones., • Fabricate and characterize optical fibers to meet performance specifications and project requirements., • Conduct research, propose experiments, and analyze data to validate hypotheses and improve process understanding, particularly for troubleshooting fiber performance and quality as well as equipment and materials issues., • Manage, maintain, and upgrade mechanical and electronic facilities for optical fiber fabrication and testing, including automation, data logging, and fabrication records., • Collaborate with project teams to design and develop fabrication processes and facilities for fiber fabrication, particularly for novel fibers., • Stay informed of, and contribute to, advancements in fiber draw technology and integrate best practices in collaboration with global R&D, manufacturing, and engineering teams., • Communicate and document research findings through detailed technical reports and presentations., • Be a strong team player with openness and willingness to contribute toward group goals and achievements., • Perform other related duties as required to meet project and organizational needs.Key Qualifications:, • Key qualifications:, • Preform Assembly – 2+ years of experience in a materials, mechanical, or manufacturing role. Ability to perform precision assembly work in a cleanroom environment., • General requirement:, • Master’s (MSc) or Ph.D. in Physics, Mechanical or Chemical Engineering, Materials Science, or a similarly related field., • Proven expertise in developing and optimizing manufacturing processes, preferably in optical fiber or similar manufacturing., • Experience in designing, analyzing and reporting experiments for complex process systems.Knowledge and Experience Requirements:, • Proficiency in data analysis, experimental design, and process optimization methods., • Understanding of high-temperature processes related to glass properties and material flow is an advantage., • Experience with fiber characterization techniques, including optical and mechanical property measurements., • Analytical and problem-solving skills to address complex process challenges and defects., • Leadership skills to guide technical teams and mentor junior staff effectively., • Collaboration skills to work with cross-functional teams and global partners., • Excellent technical writing and presentation skills for communicating research findings and process updates., • Strong organizational skills to manage multiple projects and prioritize tasks effectively., • Adaptability to work independently while supporting team objectives in a dynamic environment., • Passion for innovation and a strong drive to advance fiber draw processes and technologies.General Expectations:, • Demonstrate effective communications (verbal, written) skillsProficient with MS Office Word and Excel, • Maintain discretion when working with confidential and proprietary information, • Strict adherence to Company safety policies and procedures, • Conform to all aspects of Company’ “Standards of Conduct” documentWorking at the company means having the opportunity to realize ideas, experience innovation and discover new solutions for the future. The company offers:, • Dynamic work environment, • Competitive salaries (100K - 140K Commensurate with experience), • Generous benefits programs, including medical, dental, tuition reimbursement, • Matching 401(k) planEmployees are expected to serve as role models for safe work practices and behaviors. This includes following established health and safety policies and procedures, maintaining a clean, organized work area, wearing, and properly storing all personal protective equipment (PPE), and actively engaging as a safety conscious worker with personal safety and wellness as a priority.

Job Description Location: [NJ/Hybrid/Remote] Type: Full-time Level: Mid to Senior About us - 1Kosmos is the leader in identity verification, providing a unified platform that combines identity verification and passwordless authentication into a single platform. With 75M+ users, millions of verifications, and authentications, and 3x growth, we're transforming how organizations verify and authenticate workers, customers, and citizens. We're FedRAMP High Authorized—the only FedRAMP High authorized, Kantara-certified Full Service NIST 800-63-3 digital identity wallet solution—and certified to the highest industry standards including FIDO2, ISO 27001, and SOC II Type 2. Recognized by Gartner as ranking highest for Workforce Use Cases in the 2025 Critical Capabilities for Identity Verification report, 1Kosmos is trusted by Fortune 500 enterprises across financial services, government, healthcare, insurance, manufacturing, and retail. The Opportunity We're seeking a Product Manager for Identity Verification to own and drive the roadmap for our Gartner-recognized identity verification platform. This is your chance to shape a product used by millions of users across the world's leading enterprises, directly influencing how organizations verify identities, prevent fraud, and ensure compliance. You'll own the end-to-end product strategy and execution for our identity verification capabilities, balancing customer needs, market trends, regulatory requirements, and technical innovation. This role is ideal for a product leader who wants significant ownership, the ability to move fast, and the opportunity to make a measurable impact at a high-growth Series B startup. What You'll Do Own the Product Roadmap • Define and drive the product vision and roadmap for 1Kosmos' identity verification platform, prioritizing features that deliver customer value and competitive differentiation, • Set product strategy based on market analysis, customer feedback, competitive intelligence, and business objectives, • Make critical build vs. buy vs. partner decisions that accelerate time-to-market and maximize ROI, • Maintain a healthy backlog aligned to quarterly and annual goals Drive Product Innovation Identify opportunities to enhance document verification capabilities (passports, driver's licenses, government IDs, etc.) using OCR, computer vision, and AI/ML • Evolve biometric verification features including liveness detection, facial recognition, and anti-spoofing technologies, • Develop a workflow builder that can scale to help customers build bespoke, • Design seamless verification experiences for workers, customers, and citizens across mobile and web platforms, • Stay ahead of emerging fraud vectors and build defenses into the product Collaborate Cross-Functionally • Partner with Engineering to translate product requirements into technical specifications and ensure high-quality delivery, • Work with Design/UX to create frictionless verification experiences that balance security with user convenience, • Collaborate with Sales and Customer Success to understand customer pain points, identify growth areas, and drive adoption, • Engage with Compliance and Legal teams to ensure product meets regulatory requirements across global markets, • Coordinate with Marketing to position features, launch new capabilities, and drive customer awareness Be Customer-Obsessed • Conduct customer interviews, usability testing, and data analysis to deeply understand user needs and pain points, • Build strong relationships with key customers and prospects to validate assumptions and gather feedback, • Translate complex technical capabilities into clear value propositions for different personas (IT, security, compliance, end users), • Monitor product metrics including verification success rates, user drop-off, false positive/negative rates, and customer satisfaction, • Advocate for customers internally and ensure their voice shapes product decisions Lead with Data • Define and track KPIs that measure product health, adoption, and business impact, • Analyze product usage data to identify opportunities for optimization and growth, • Conduct A/B tests and experiments to validate hypotheses and improve conversion, • Build business cases for new initiatives, quantifying expected ROI and impact Stay Ahead of the Market • Monitor competitive landscape and emerging trends in identity verification, biometrics, and authentication, • Track regulatory changes across jurisdictions and ensure product compliance, • Represent 1Kosmos at industry events, customer meetings, and analyst briefings, • Contribute to thought leadership through blogs, webinars, and speaking engagements What You Bring Required Qualifications • 5+ years of product management experience, preferably in identity verification, authentication, cybersecurity, or enterprise SaaS, • Proven track record owning and delivering a product roadmap from strategy through execution, • Deep understanding of identity verification technologies including document verification, biometrics, liveness detection, and identity proofing, • Strong technical acumen with the ability to work effectively with engineering teams on complex solutions, • Customer-centric mindset with experience conducting user research and translating insights into product requirements, • Excellent communication and stakeholder management skills, with the ability to influence at all levels, • Data-driven decision maker comfortable with analytics, experimentation, and metrics, • Startup mentality with the ability to thrive in a fast-paced, ambiguous environment Preferred Qualifications • Background in KYC/AML, fraud prevention, or trust & safety, • Familiarity with AI/ML applications in computer vision, OCR, or biometric authentication, • Experience shipping mobile-first or omnichannel products, • Technical background or engineering degree, • Experience working with Gartner, Forrester, or other analyst firms, • Track record of launching products in regulated industries (financial services, healthcare, government) Who Thrives Here • Product owners who want real autonomy and the ability to shape strategy, not just execute someone else's vision, • Fast movers who can prioritize ruthlessly and ship quickly in a dynamic environment, • Technical translators who can bridge the gap between engineering complexity and customer value, • Customer champions who are energized by solving real problems for real users, • Collaborative leaders who build strong cross-functional relationships and influence without authority, • Curious learners who stay current on technology trends, market shifts, and competitive dynamics, • Impact-driven professionals who want their work to matter and be measured What We Offer • Ownership of a strategic product at a Gartner-recognized, high-growth company, • Competitive salary and equity package, • Health, dental, and vision insurance, • Unlimited PTO policy, • Professional development budget, • Opportunity to work with Fortune 500 customers and cutting-edge identity technologies, • Collaborative, fast-paced culture where your ideas become reality

We are seeking a Business Analyst to support a SAP Global Trade Services (GTS) implementation as part of the GTS/Transcend program.This role will drive function-specific deployment activities across design, testing, training, cutover, and hypercare, while ensuring seamless integration across Innovat

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Systems Engineer, based in Somerset, NJ, is a multifaceted role requiring an in-depth understanding of BEUMER sortation products and applications. This position is responsible for analyzing customer requirements, developing innovative solutions, estimating costs, overseeing the development of layouts using 2D and 3D CAD and delivering customer proposals. Additionally, the Systems Engineer acting in the capacity of subject matter expert, collaborates with Sales, Engineering, and Software/Controls to ensure the successful design of solutions that address customer requirements. The Systems Engineer is also responsible for participating in and leading client meetings, calls and workshops serving in the capacity of a technical expert. Key Responsibilities: Subject Matter Expertise: • Become an expert in BEUMER's Logistics products, solutions and applications., • Lead and engage in initiatives that require expertise to address customer requirements through innovative solutions., • Understand customer requirements and business objectives and recommend appropriate products and solutions to meet their needs., • Analyze customer requirements to identify system design needs., • Develop innovative solutions using 2D and 3D CAD., • Collaborate with Sales, Engineering, and Software/Controls departments to design and develop effective system solutions., • Serve as the primary point of contact (acting as a subject matter expert) for customers, providing pre-sales and post-sales consulting on technical topics., • Develop and estimate cost associated with system design and solutions., • Coordinate in developing RFPs and manage vendor responses to RFPs., • Develop tools and assist in processes development as needed., • Participate, lead and coordinate client meetings, workshops and calls as necessary., • Coordinate with Sales, Systems Engineering, Operations and Finance to handover orders. Key Requirements and Professional Attributes: • Bachelor's degree in Industrial, Mechanical, or Electrical Engineering, • 4-6 years of experience in systems engineering, technical sales or product engineering; preferably in convey and sortation solutions., • High motivation, drive and initiative to get things done with little to no supervision., • Team player and ability to work well with large team setups including internation cultures., • Strong time management, organization and attention to detail., • Excellent written and verbal communication skills., • High computer literacy in MS Office Suite., • Proficiency in 2D and 3D modeling with preferred experience in AutoCAD and SolidEdge., • Strong mathematical, analytical, and problem-solving skills, • Active listening for customer satisfaction and technical insight, • Preferred experience automated systems, and MS Excel/VBA programming, • Ability to set and meet goals, care for others, and work collaboratively in a team., • Ability to travel as per business needs. Estimated travel is 15-20% on average. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionCompany Description BEUMER has operated in the North American market for more than 40 years and has completed over 160 airport baggage handling projects; with fully integrated design and manufacturing systems in the United States. We are a family owned intra-logistics leader where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Mechanical Project Engineer is a hands-on individual with the maturity and experience to drive engineering projects from start to finish. This position requires good technical, organizational and communication skills to develop material handling systems. An ideal candidate will have previous mechanical design experience broadened by recent system projects in the material handling industry. The Mechanical Project Engineer reports directly to the Mechanical Engineering Manager. In addition, he/she will work closely with Sales, Project Management, Purchasing and installation personnel on a daily basis. Primary Responsibilities: • Assist Sales in the creation of equipment proposals by providing engineering analysis and design expertise., • Assist Project Managers with system commissioning and field support., • Evaluate and understands project requirements to plan execution of components design and select system components., • Evaluate manufacturing feasibility, estimate cost, and assess maintenance requirements of a variety of material handling systems., • Design systems layout and specific components on 2D and 3D CAD equipment and software Our products could include steel structures, sheet metal parts, mechanisms and other Beumer products. Optimize for cost, functionality and manufacturability, • Write specifications, user’s manuals, and enter other data to fully document engineering designs., • Coordinate, and monitor all aspects of production, including selection of manufacturing methods, fabrication. Assist procurement with parts ordering and supplier selection., • Ability to coordinate the efforts between different fields of engineering, purchasing, project management and site integration, • Maintain accurate records and prepare a variety of meeting notes, letters and technical reports that are clear and concise, • Ability to successfully define technical scope of work for the purchase of sub-systems or components, • Ability to make technical decisions for optimum end results, • Ability to present technical solutions for both internal and external stake holders, • Be able to take lead on multiple logistic projects at the same time. Requirements / Skills / Abilities: • A Bachelor Degree in Mechanical Engineering and related field or equivalent experience, • 6 to 10 years of hands-on experience in a manufacturing and project engineering settings. Preferred experience in design of automated machines and material handling capital equipment, • Prefers a broad background in various machine technologies (control, pneumatic, hydraulic), • Proficient in 2D and 3D modeling CAD design programs, • Ability to analyze and design basic mechanical components by applying knowledge of mechanical engineering, • Ability to specify mechanical, pneumatic and hydraulic components, • Good knowledge of drafting, dimensioning, tolerancing and manufacturing processes, • Excellence in time management; attention to detail and the ability to learn quickly, • Excellence in communication (both verbal and written), • Professional, positive, and have an energetic attitude-excellent interpersonal skills. Self-motivated, trustworthy, and respectful of others, • Ability to travel both domestically and internationally as needed, up to 20%., • Excellent listening skills, • Be able to apply engineering principles and practices to the solution of advanced mechanical engineering problems, • Good Understanding of IBC and OSHA requirements for Material Handling Equipment, • Effective use of project engineering tools, • Expertise of electrical motors, pneumatics, hydraulics and power transmission techniques, • Ability to lead prototype testing efforts of various Material Handling Equipment components and come up with technical solutions Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description We’re hiring a bilingual (English/Spanish) Manufacturing Site Manager to lead and transform operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Manufacturing Site Manager is responsible for manufacturing plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Manufacturing Site Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ manufacturing plant operations management experience, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

We are seeking a detail-oriented and results-driven Email Marketing Specialist to manage and execute our email marketing campaigns from strategy through deployment. This role will be responsible for creating, testing, and optimizing email communications to drive engagement, conversions, and customer

Job DescriptionDescription: Compensation Salary - $65,000 - $75,000 / year Plus - uncapped commissions, car package, bonus, profit sharing Built for Stability In an industry where layoffs and company buyouts have become common, Approved Fire Protection & Security remain focused on long-term growth and steady opportunity. We’re proud to hire talented professionals who are looking for lasting careers, not short-term stops. If you are interested in: • Steady workflow, • Supportive team culture, • Long-term opportunity for growth, • Respect for your craft Approved Fire Protection & Security is New Jersey's oldest family-owned, full-service fire protection and safety equipment company. Our services include fire extinguishers, alarm systems, suppression systems, SCBA, gas detection, carbon dioxide, oxygen, sprinkler systems, access control, CCTV, and so much more. Approved Fire Protection & Security’s mission is to supply life safety and security products and services to the industrial, commercial, pharmaceutical, and municipal companies in New Jersey and near surrounding areas. Job Summary: We are seeking a driven, high-energy new Business Sales Representative to aggressively grow our Fire Protection’s portfolio. This role is focused on pure hunting and outbound prospecting, building new relationships, driving first-time appointments, and converting opportunities into revenue. The ideal candidate thrives on activity, embraces cold outreach, and excels at opening new doors through phone calls, LinkedIn messaging, email campaigns, networking, and in-person site visits. This individual will represent our full line of Fire Protection and Security offerings—including inspections, monitoring, suppression, sprinkler service, fire alarm, access control, CCTV, intrusion systems, and system upgrades—while educating customers on compliance, safety, and risk reduction. Success in this role is measured by daily/weekly outbound activity, KPI targets, pipeline growth, and consistent quota attainment. If you are competitive, motivated by new business generation, and excel in fast-paced sales environments, this position offers strong earning potential, autonomy, and the opportunity to make a meaningful impact on customer safety and security. Benefits: · Medical · HSA · Dental · Vision · 401k with company contribution · Aflac · Life Insurance · Long term disability · Long Term Care Insurance · Summer Hours Program · Profit Sharing · PTO Essential Duties and Responsibilities: • Drive net-new revenue across fire protection and security service lines through proactive prospecting, • Hunt aggressively within assigned territory using cold calling, door knocking, LinkedIn outreach, networking, and email campaigns, • Generate leads, qualify prospects, and secure appointments with decision-makers, • Present and sell full portfolio of solutions including fire alarms, sprinklers, suppression systems, monitoring, access control, CCTV/video, intrusion, inspections & testing contracts, • Conduct on-site walkthroughs and system assessments to identify compliance, security vulnerabilities, and upgrade opportunities, • Maintain an organized funnel and pipeline strategy to ensure consistent opportunity creation, • Log all communication, appointments, quotes, and follow-ups inside CRM for transparency and accountability, • Prepare and deliver proposals for inspections, maintenance, monitoring agreements, retrofits, and new system installations, • Follow up persistently on aging quotes, open opportunities, and competitive bids until closed-won or closed-lost, • Leverage professional networks, chamber events, trade associations, safety groups, and community relationships for lead generation, • Build relationships with facility managers, business owners, general contractors, EHS/Safety teams, property managers, IT/security directors, and AHJs, • Coordinate with operations, design, and engineering to scope projects and ensure seamless handoff of awarded work, • Develop strong knowledge of code compliance (NFPA, IBC, NEC), AHJ requirements, and industry standards for both fire and security, • Attend industry events, trade shows, and technology demonstrations to stay up-to-date on evolving solutions and market needs, • Meet and exceed established KPIs including outbound call volume, LinkedIn outreach, in-person touches, new meetings set, and proposal output, • Hit sales quotas consistently through disciplined prospecting cadence, strong closing ability, and ongoing funnel management, • Uphold a high level of professionalism, urgency, integrity, and consultative problem-solving in every interactionRequirements: Required Qualifications: • Prior experience in the fire protection and/or security industry is a MUST., • Prior outside sales experience is a MUST., • Able to travel to customer sites throughout your territories., • Excellent communication, negotiation, and interpersonal skills via e-mail, text message & phone., • Valid driver's license and excellent driving record., • Must pass a background check and pre-employment drug screen., • Excellent customer service skills., • Continuing education as training/ seminars arises, • Must be able to work Monday through Friday 7:20 am – 4:20 PM Equal Opportunity Employer/Veterans/Disabled Approved Fire Protection is deeply committed to a policy of equal employment opportunity for all its job applicants and employees. We seek to employ qualified persons in all job classifications and to administer all personnel actions affecting our employees without discrimination on the basis of race, color, religion, sex, pregnancy, age, national origin, sexual orientation, gender identity, political ideology, ancestry, or genetic information. Individuals with a disability, disabled and other protected veterans and any other characteristic protected by applicable law will be given the fullest consideration for employment in positions for which they are qualified. We also are committed to making reasonable accommodation for qualified individuals with a disability as well as abiding by any and all state and local laws, which in addition to the above prohibit discrimination in any form.

Job Description JOB DESCRIPTION: • Define and communicate ERP roadmap aligned with company objectives., • Manage and mentor ERP analysts and product owners; foster a culture of continuous improvement, • Oversee ERP system upgrades, maintenance, and performance optimization., • Develop and manage project plans, budgets, and timelines for ERP initiatives., • Collaborate with business units, IT, and external partners to design and deliver solutions., • Manage ERP licensing, monitor usage, and optimize costs., • Analyze upcoming releases, assess impacts, and communicate changes to stakeholders., • Lead release planning, testing, and deployment of updates and new features., • Act as liaison between ERP team and stakeholders; represent company in dealer groups., • Coordinate training, documentation, and user support for new functionality., • Monitor feedback and business outcomes, drive enhancements for efficiency and satisfaction., • Maintain automated test libraries and quality assurance processes. RECOMMENDED QUALIFICATIONS: • Bachelor's degree in Information Technology, Computer Science, Business Administration, or a related field., • Proven experience in ERP system management, implementation, and maintenance., • D365 experience is a must., • Excellent project management skills, with the ability to manage multiple projects simultaneously., • Strong analytical and problem-solving skills., • Excellent written and verbal communication skills., • Solid organizational skills, including attention to detail and multitasking skills., • Knowledge of data security and compliance regulations. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job Description Project Manager – WMS & ERP Implementation Position Overview GMI Trading is looking for an experienced Project Manager to lead the implementation and optimization of our Warehouse Management System (WMS) and ERP platforms across our wholesale distribution operations. This is a hands-on leadership role for someone who has successfully delivered WMS and ERP implementations in high-volume warehouse environments and understands both the technology and the operational realities behind it. You will partner closely with Operations, Finance, IT, and executive leadership to ensure our systems support scalable growth, real-time visibility, and operational excellence. Key Responsibilities Lead ERP & WMS Implementations • Own the full lifecycle of WMS and ERP implementation projects — from requirements gathering through go-live and stabilization., • Serve as the primary point of contact between GMI Trading and external system vendors., • Develop and manage project plans, timelines, and budgets., • Oversee system configuration, testing, integrations, and user acceptance., • Align system capabilities with real-world warehouse workflows., • Improve inventory accuracy, order fulfillment, and reporting visibility., • Support warehouse automation initiatives, including conveyor and material handling systems., • Work closely with Operations, Procurement, Finance, and IT to redesign processes where needed., • Translate business needs into system requirements., • Develop and execute training plans to ensure strong user adoption., • Communicate clearly across all levels of the organization during implementation., • Proven track record of successfully implementing WMS platforms in warehouse distribution environments., • Hands-on experience supporting or leading ERP implementations Dynamics, SAP, Sin7 and etc.), • Strong understanding of wholesale or high-volume distribution operations., • Experience integrating systems across operations and finance., • Project management expertise with the ability to keep multiple workstreams moving.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility Are you a seasoned engineering professional with a passion for automation and innovation? As a Senior Controls Engineer at BEUMER Group, you will lead the design, development, and implementation of advanced control systems for high-speed sortation and conveyors-based material handling solutions. This strategic and hands-on role requires deep technical expertise, leadership capabilities, and a collaborative mindset to drive excellence in fulfilment automation. Responsibilities • Lead the design and programming of machine controls for BEUMER high-speed sortation systems., • Architect scalable and modular PLC and HMI solutions tailored to customer specifications., • Oversee hardware selection, I/O mapping, and control logic development across multiple platforms., • Collaborate cross-functionally with electrical, mechanical, and software engineering teams., • Mentor junior engineers and provide technical leadership throughout project lifecycles., • Conduct system emulation and validation testing to ensure performance and reliability., • Manage on-site commissioning and troubleshoot complex system behaviors., • Develop and maintain comprehensive documentation, standards, and training materials., • Drive continuous improvement initiatives and contribute to R&D efforts. Requirements/Skills and Abilities: Education & Experience: • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or related field., • 10+ years of experience in controls engineering, preferably in the material handling or automation industry., • Advanced proficiency in programming Allen-Bradley and/or Siemens PLCs., • Expertise in SCADA systems, especially Ignition platform development and integration., • Strong understanding of industrial communication protocols and industrial networks (Ethernet/IP, Profibus, ProfiNet etc.), • Experience with safety systems, motion control, and robotic integration is a plus., • Excellent communication and leadership skills., • Strong analytical and problem-solving abilities., • Ability to manage multiple priorities and mentor team members., • Willingness to travel nationally and internationally up to 30% for project execution. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description Summary World Insurance Associates is a unique insurance organization offering top products and services from major providers, combined with attentive service from local agents. Founded in 2011, World is one of the fastest-growing insurance brokers in the U.S. with over 2,200 employees in over 260 offices across North America. We specialize in personal and commercial insurance lines, surety and bonding, employee benefits, financial and retirement services, and human capital management solutions. Our rapid growth and market leading presence has created opportunities throughout the state and we offer top talent the choice to work from one of our multiple offices throughout the region. Position Overview This position’s primary responsibility will be to provide technical expertise, coordinate day-to-day deliverables for the data analysis & data governance team and interpret and analyze large datasets. The candidate should be well versed in the fields of analytics, testing, programming, and development; able to research technologies independently to recommend appropriate solutions & should contribute to technology-specific best practices & standards; contribute to success criteria from design through deployment; contribute expertise on significant application components, program languages, databases, operating systems, testing phases etc. Key Responsibilities: • Conduct in-depth analysis of large datasets to identify trends, patterns, and anomalies, • Data cleansing and preparation, including cleaning and preprocessing raw data to ensure accuracy and reliability, developing and implement data quality standards and working with a team to integrate and automate data pipelines, • Create and maintain comprehensive dashboards and reports for key performance indicators, • Use visualization tools (e.g., Tableau, Power BI) to present complex data in an understandable format, • Self-motivated with ability to work effectively with limited supervision, enthusiasm for collaboration, continuous learning, and a team player., • Advanced Excel expertise (pivot tables, VLOOKUPS, Power Pivot, functions, etc.), • Understand importance of code review and automated testing and different levels at which these need to be performed and write and implement tests as required., • Bachelor’s degree or foreign equivalent from an accredited institution. Preferred Qualifications • Experience in design, development, and deployment of BI solutions using PowerBI (DAX, RLS), Python, Pyspark, Google Big query., • Knowledge or experience in implementing solutions with Microsoft PowerApps, Power Automate, and/or Common Data Service (Power Platform)., • Data Governance, Data Quality, Master Data Management knowledge., • 3-5+ years of proven experiences as a data analyst, • 3-5+ years of T-SQL language/query experience with data manipulation (SQL) like stored procedures, functions etc., • Knowledge of data models, data modelling (Relational and Dimensional), Data profiling and working with large data environments., • Strong communication, team player and advance analytical skills to analyze data issues and drive appropriate actions with data operations and business processes. Position Summary This position is located in New Jersey. The base salary for this position at the time of this posting may range from $80,000 to $90,000. Individual compensation varies based on job-related factors, including business needs, experience, level of responsibility, and qualifications. We offer a competitive benefits package and variable pay programs, please visit for more details. Equal Employment Opportunity At World Insurance Associates (WIA), we celebrate and support our differences. We know employing a team rich in diverse thoughts, experiences, and opinions allows our employees, our products, and our community to flourish. WIA is honored to be an equal opportunity workplace. We are dedicated to equal employment opportunities regardless of race, color, ancestry, religion, sex, national orientation, age, citizenship, marital status, disability, gender identity, sexual orientation, or Veteran status. In addition, WIA makes reasonable accommodations to known physical or mental limitations of an otherwise qualified applicant or employee with a disability, unless the accommodation would impose an undue hardship on the operation of our business. TO EXECUTIVE SEARCH FIRMS AND STAFFING AGENCIES: World does not accept unsolicited resumes from any agencies that have not signed a mutual service agreement. All unsolicited resumes will be considered World’s property, and World will not be obligated to pay a referral fee. This includes resumes submitted directly to Hiring Managers without contacting World’s Human Resources Talent Department. #LI-GP1#LI-HYBRID Powered by JazzHR ZrwqzemlNu

Job DescriptionGetlabs is the leading platform for at-home diagnostics. Healthcare organizations use Getlabs to send mobile phlebotomists to patients’ homes and collect labs, vitals, and advanced diagnostics. By leveraging Getlabs, partners can improve patient adherence and close gaps in care with same-day, nationwide availability. Our team has raised $50M from strategic investors including the two largest diagnostic laboratories in the United States, Labcorp and Quest. Getlabs’ mission is to save lives by expanding access to diagnostics for everyone. About the role:We are currently seeking PRN (as needed) Mobile Phlebotomist interested in joining a high-growth stage startup with strong experience in working in hospitals, in office, or mobile environments. Candidates must maintain a high standard of excellence with minimal supervision. Above all, we are seeking candidates who are friendly, empathetic, compassionate, and genuinely care about patients. Although we provide mobile phlebotomy, we see ourselves as a patient experience company first and foremost. For that reason, we believe the quality of our specialists is the secret sauce for Getlabs. Every interaction with patients is an opportunity to deliver a thoughtful and amazing experience.At Getlabs, you will: • Visit patients in their home or office, drive to and from appointments (in your own vehicle), process specimens with a centrifuge that plugs into your car, drop samples off at patient service centers or laboratories, • Follow safe and accurate blood collection procedures and processing of specimens, with a high degree of accuracy, • Ability to adapt in a rapid high-growth environment, • Maintain close communication with the operations and patient experience team during business hours, • As PRN, you will confirm your availability to your leader every Friday for the week ahead or weeks ahead, if possible), • Based on the availability that you have submitted, your leader will either schedule you in advance or call you as needed for shifts that fall within your availability, • As a PRN, the expectation is that you are available a minimum of three (3) days a week during the hours of 5am-1pm ("Expected Shifts") between Monday and Friday. You are eligible to work up to 29 hours a week but are not guaranteed any hours in a PRN roleWhat we are looking for:, • Phlebotomy certification from an accredited agency, • 1 year of phlebotomy experience (mobile phlebotomy experience preferred), • Experience processing samples, • Certification from a national agency such as American Medical Technologists (AMT), American Society for Clinical Pathology (ASCP), or National Center for Competency Testing (NCCT), • Proven track record in providing exceptional customer service, • Strong communication skills; both written and verbal, • Ability to drive in the dark - first appointments may be as early as 5am!, • Ability to physically access patients including but not limited to kneeling, bending, stooping, sitting and reaching, • Ability to physically navigate patients homes including but not limited to climbing stairs and carrying 15 pounds while walking, • Ability to work independently or in a team environment under minimal supervision, • Reliable transportation and clean driving record, • Bonus Qualifications: Fluent in SpanishWe have great benefits to make your life easier so you can focus on what you're best at:, • W2 employment at $23/hr, • Flexible schedule, • Mileage reimbursement

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description BEUMER Corporation is expanding its value services for our Conveying & Loading Customers in North America by providing for additional capacity for the installation, commissioning, maintenance and support of all the BEUMER conveying systems and equipment in a customer’s facility. Our main goals and objectives are safety and to maximize uptime at best possible value. These systems include BEUMER Overland Conveyor Systems, AFR, and traditional Heavy duty Conveying equipment. BEUMER Corporation is looking for an experienced Field Service Technician in order to support these technologies. General Responsibility The Field Service Technician is a hands-on leadership role requiring strong mechanical and electrical expertise, along with experience in heavy conveying systems and maintenance operations. The ideal candidate brings solid technical knowledge, a deep understanding of system technology, and the interpersonal skills needed to communicate effectively and support team success. With the team, you will utilize on site and hands on training and partnering to expand your technical skills as you support critical materials handling systems and their operations. The focus will be on gaining expertise on the latest technology being presently implemented in these facilities. Must be able and willing to travel up to 80% of the time. Primary Responsibilities The Field Service Technician performs and manages the installation, commissioning, service and support of the critical BEUMER system. Your primary objective is to provide supervision and excellence for the installation and support of these systems. The Field Service Technician has advanced technical capabilities and experience, can perform and train on all of the duties required for the maintenance, troubleshooting, monitoring and reporting of these systems. The Field Service Technician is responsible for the following: • Understanding customer requirements and how they translate into operational and functional requirements of the systems., • Access and troubleshooting of electro-mechanical components, including IO cabling and network components., • Effective communication with Customers and Internal technical resources to aid resolution, • Provide accurate and timely written reports of operational and maintenance issues., • Interpret data and suggest maintenance schedule/activity adjustments Operate systems and components to demonstrate equipment and to analyze malfunctions, • Inspects, determine, oversee and perform corrective, emergency and preventative maintenance of the conveying systems and its associated components, • Analyze and review findings to determine source of problem, and recommends repair, replacement, or other corrective action as well as coordinate problem resolution with engineering, customer service, and other personnel to expedite repairs., • Interprets maintenance manuals, schematics, and wiring diagrams, and repairs equipment, utilizing knowledge of electronics and using standard test instruments and hand tools., • Consults with engineering personnel to resolve unusual problems in system operation and maintenance., • Supervise workers in installation, testing, tuning, and adjusting equipment to obtain optimum operating performance., • Prepare detailed Service reports and or as-built documentation for work completed. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications • Demonstrated capability and experience in technical disciplines and maintenance operations., • Demonstrated capability and experience in the maintenance and troubleshooting of bulk conveying systems and industrial equipment., • Demonstrated capability and experience with heavy conveyors, belting and drive systems, Electro-mechanical systems and their maintenance as well as experience in preventative maintenance., • Ability to:, • Work as part of the project team., • Use computer-based tools for communication, trouble shooting, and programming., • Quickly acquire additional technical skills for new materials handling technologies., • Be a mentor and teacher to other Maintenance personnel and operational personnel., • Handle multiple tasks and work under pressure, sense of both urgency and thoroughness., • Read schematics and diagrams., • Strong understanding of industrial power, electrical and control circuits and devices., • Strong PC skills (Windows, Word, Excel, remote capabilities)., • Good time management., • Self-motivated, trustworthy, respectful of others., • Attention to detail., • Good communication skills (both verbal and written)., • Professional, positive, and energetic attitude. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. And by the way, no waiting period, they start when you do: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most! All your information will be kept confidential according to EEO guidelines.

Job DescriptionSummary At Factory Direct Enterprises LLC d/b/a Ashley (FDE), we are committed to "Amazing" our Team Members by supporting their journey toward becoming their best selves. This commitment is reflected in our competitive compensation, benefits, culture, and growth opportunities, all of which align with our vision of being the employer of choice in every community we serve. Who We Are: • #1 Selling Furniture Brand in the World, • #1 Retailer of Furniture and Bedding in the United States As an industry leader, we offer the best compensation package in the furniture industry, including: • Competitive Base Salary range between $ $105,000 – $125,000 annually based on qualifications and relevant experience., • 401(k) Program with a company match., • Paid Time Off and Holiday Pay, including your birthday., • Medical, Dental, and Vision Benefits starting as low as $25 a week., • Referral Bonuses: Earn up to $1,000 for referring qualified candidates for open positions. Our Culture and Team Member Programs: At FDE, we pride ourselves on a culture of recognition and growth. We believe in investing in our team and value their feedback through programs like Employee Surveys. Our Ashley Cares programs highlight our commitment to our team, our guests, and our communities, including: • Hope to Dream: For every mattress sold, a portion of the proceeds is used to purchase and donate beds to children in need (ages 3-16)., • Give a Day: Every Team Member is encouraged to volunteer for one day per year with an approved organization, and we'll pay you for that day., • Corporate Chaplains: Providing support in areas such as grief care, hospital visits, marriage and parenting support, aging parents, and stress management., • Life Resources: Quarterly events supporting Team Members in areas like finances, relationships, health, and wellness., • Team Member Relief Fund: Offering financial support for unexpected life events., • SmartDollar: A FREE financial wellness program to help you budget, reduce debt, and save for the future. Essential Functions The FP&A Senior Analyst is a strategic finance partner responsible for transforming data into actionable insights that drive business performance across Factory Direct Enterprises (FDE). This role goes beyond reporting numbers — it exists to explain, influence, and improve results. The FP&A Senior Analyst leads forecasting, budgeting, month-end analysis, and financial modeling efforts that inform critical decisions for leadership and the Board. The ideal candidate combines analytical rigor with strong business acumen, communicates clearly, and takes full ownership of deliverables from start to finish. This position requires curiosity, initiative, and the confidence to challenge assumptions while maintaining accuracy and professionalism. Key Responsibilities Month-End Reporting & Analysis • Lead the month-end financial analysis process, delivering accurate and timely reporting packages that summarize company performance., • Perform detailed variance analysis versus budget, forecast, and prior year — identifying root causes and actionable insights., • Prepare the monthly Executive Financial Package and quarterly Board reporting slides, including commentary that clearly communicates key trends, risks, and opportunities., • Partner with Accounting to ensure understanding of key accruals, adjustments, and timing variances impacting reported results., • Lead the monthly forecasting process, ensuring completion and submission by the 8th business day of each month., • Partner with business leaders to identify drivers, risks, and opportunities that impact performance., • Build and maintain forecasting frameworks that link operational inputs (sales, traffic, units, and headcount) to financial outcomes., • Prepare clear variance analyses and commentary that summarize financial trends and inform future forecasts., • Own the annual budgeting process from timeline creation to Board presentation., • Coordinate data collection and validation across departments to ensure completeness and accuracy., • Consolidate departmental budgets into a fully reconciled company-wide budget, with supporting schedules and assumptions., • Develop presentation materials and narratives summarizing key takeaways, performance goals, and strategic priorities., • Design and maintain an integrated forecasting model that projects revenue through cash monthly., • Use models to perform sensitivity analysis and scenario testing, evaluating the financial impact of different business outcomes., • Continuously improve model accuracy and usability through automation, data integration, and enhanced logic., • Oversee the creation and maintenance of recurring operational reports and dashboards (Power BI, Excel, or similar), ensuring the development team delivers clear, actionable insights into project progress, throughput, quality, and overall departmental performance., • Automate recurring reports to improve efficiency and timeliness while ensuring accuracy and consistency., • Produce executive-ready slides and analyses that summarize the "what," "why," and "what's next" of company performance., • Partner with department leaders to explain trends and ensure alignment on drivers, impacts, and corrective actions., • Serve as the financial partner to department and operational leaders., • Communicate proactively — sharing insights and updates before being asked., • Participate in business reviews, providing clear financial context and recommendations for improvement., • Identify opportunities to streamline and automate planning, reporting, and analysis processes., • Collaborate with IT/Development to improve data accuracy and integration across systems (ERP, Power BI, Excel)., • Mentor team members by sharing best practices in modeling, variance analysis, and presentation development., • Uphold FDE's core values — humility, teamwork, relentlessness, and passion for service — in every aspect of work. Schedule Expectations • Full-time Position - Minimum of 40 hours per week, • Hybrid Schedule: Mon/Tues/Thurs in office required Education & Experience Requirements • Bachelor's degree in Finance, Accounting, Economics, or related field required; MBA or CFA a plus., • 5–8 years of progressive experience in FP&A, corporate finance, or strategic analysis., • Strong experience with month-end financial reporting, forecasting, and executive presentations., • Proven ability to manage the budgeting process and deliver insights directly to senior leadership., • Advanced Excel skills (complex formulas, dynamic arrays, pivot tables, scenario modeling)., • Proficiency in Power Query and Power BI or other business intelligence tools., • Experience with ERP systems (Royal4, STORIS, NetSuite, or comparable)., • Strong understanding of GAAP financial statements, variance analysis, and data validation., • Extreme Ownership: Takes full accountability for results and outcomes., • Analytical Rigor: Synthesizes large data sets into clear, actionable insights., • Proactive Communication: Keeps leadership informed and anticipates information needs., • Strategic Thinking: Connects financial data to business drivers and outcomes., • Process Improvement: Continuously challenges inefficiencies to optimize performance., • Executive Presence: Delivers analysis and recommendations confidently and clearly.