Electrical contractor jobs in Perth Amboy, New JerseyCreate job alerts

Job Description Growing commercial/ industrial electrical contracting company seeking a full-time electrical journeyman! The Journeyman is primarily responsible for installing the electrical scope for the given project. He/ She must be hands on, a self starter, takes pride in their work and a positive/ optimistic person. Qualifications -Minimum two (2) years of experience in the installation, maintenance, and repair of electrical systems, equipment and fixtures using blueprints, schematics and sketches. -Pass a background check, including drug test. -Ability to successfully install, maintain, and repair electrical wiring, equipment, and fixtures. -Knowledge using hand tools, small power tools, shop machines, and heavy equipment. -Knowledge with construction documents, blueprints, building plans, and installation manuals to determine materials requirements and installations procedures. -Knowledge installing and mounting electronic controls, device panels, sensors, and components. -Has a basic understanding of the latest edition of the NEC. Responsibilities -Perform work as directed by the foreman/ direct supervisor -Install different type of electrical systems and components in various commercial and industrial facilities. -Analyzes and quickly report any work problems to supervisor -Follows the companies the standards of safety, and exemplary quality of work Company DescriptionLynch Power is a fast-growing commercial and industrial electrical contractor based in northern New Jersey. Our young, tech-savvy team thrives on hard work, collaboration, and innovation. We are committed to delivering top-tier electrical solutions through teamwork, efficiency, and cutting-edge technology. Join us and be part of a dynamic environment where growth and excellence are our driving forces.Lynch Power is a fast-growing commercial and industrial electrical contractor based in northern New Jersey. Our young, tech-savvy team thrives on hard work, collaboration, and innovation. We are committed to delivering top-tier electrical solutions through teamwork, efficiency, and cutting-edge technology. Join us and be part of a dynamic environment where growth and excellence are our driving forces.

Job Description AMEC Electric is seeking responsible, dedicated and reliable journeyman electricians to bring their talents to work with us. Are you looking for a career with an established company? Are you willing to do whatever it takes to bring your career to the next level and join our team? Responsibilities: • High quality new installations of conduit, cable tray, wiring and equipment., • Efficient and safe service and repair of existing electrical equipment., • Neat appearance., • Good customer manner., • Able to work independently and with a team., • Priority on safety. Qualifications: • Must have a minimum of 7 years practical electrical field experience., • Knowledgeable of NEC codes and industry standards, • Strong understanding of NFPA 70E., • Trained, skilled and resourceful and able to use all tools and equipment., • Proficient at bending and installing all types of conduit., • Capable of leading others and enforcing standards and rules., • Strong problem solving and critical thinking skills, • Strong understanding and familiar with all types of electrical installation., • Valid Drivers LicenseCompany DescriptionCommercial and Industrial Electrical Contractor serving Central and Northern NJCommercial and Industrial Electrical Contractor serving Central and Northern NJ

Job DescriptionJob Title: Electrical Foreman Job Description As an Electrical Foreman, you will be responsible for a variety of tasks including bending, threading, and installing EMT, aluminum, and galvanized pipes ranging from ½" to 4". You will operate pulling machines, threading tools, and hydraulic benders. Your role will involve working with fire alarm schematics, data systems, and interpreting electrical drawings. You will install and troubleshoot electrical systems, including dimming systems, and work with condensing units, air handlers, and disconnect switches. A strong understanding of electrical panels, safety standards, and codes is essential. Responsibilities • Bend, thread, and install EMT, aluminum, and galvanized pipes from ½" to 4"., • Operate pulling machines, threading tools, and hydraulic benders., • Work with fire alarm schematics and install devices according to NYC FA Code., • Perform data, Cat6, and RJ45 terminations., • Read and interpret electrical drawings, including RCPs and elevations., • Wire and install receptacles, lighting, and switching systems., • Install and troubleshoot dimming systems and other electrical components., • Manage and troubleshoot condensing units, air handlers, and disconnect switches., • Ensure electrical safety and adhere to NFPA 70E training standards., • Apply knowledge of NYC and National electrical codes and perform load calculations., • Familiarity with AWG to MCM and perform conduit bending.Essential Skills, • Proficiency in electrical wiring and blueprint interpretation., • Experience in pulling wire and conduit bending., • Operational knowledge of pulling machines, threading tools, and hydraulic benders., • Ability to perform 3-way and 4-way switching, and troubleshoot electrical faults., • Knowledge of condensing units, air handlers, and condensate pumps., • Familiarity with electrical panels, live parts, and safety standards., • Knowledge of NYC and National electrical codes., • Familiarity with AWG to at least #6.Additional Skills & Qualifications, • OSHA 30 certification., • Site Safety Training (SST)., • Strong work ethic and commitment to quality work.Why Work Here? Join a leading electrical contractor and gain the opportunity to work on high-profile projects within New York City. Enjoy being part of a team that values quality work and offers a chance to develop your skills on large commercial and high-end retail projects. Work Environment You will be working with a large private commercial electrical contractor located in Carteret, NJ. The work environment includes high-end retail and large commercial projects with some of New York's largest general contractors. The start time is at 6:00 AM. Job Type & Location This is a Contract to Hire position based out of Carteret, NJ. Pay and Benefits The pay range for this position is $25.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Carteret,NJ. Application Deadline This position is anticipated to close on Jun 4, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description FOREMAN QUALIFICATIONS: Must have commercial electrical construction experience running Crews from 10-60 people. Experience installing conduit up to 4". Experienced installing Service/Distribution systems up to 3000 Amps. Ability to lead a team safely and efficiently through all phase of job cycle. Owns all trade related tools. Experience installing Fire Alarm Systems. Excellent in problem solving job related issues. Valid Driver's License and transportation a must. OSHA 30 Required Electrical Certifications + JOURNEYMAN QUALIFICATIONS: Valid Driver's License and transportation a must. Minimum 5 years of commercial/industrial experience (applicants with primarily residential experience will not be considered as an experienced commercial electrician). Valid Driver's License and transportation. Excellent communication and customer service skills and have clean appearance. All trade related tools. Ability to follow instructions and work under supervision. OSHA 30 Required Electrical Certifications + Company DescriptionWe provide quality electrical installation on large scale projects that range from new construction, high rise, commercial and retail complexes to large industrial facilities.We provide quality electrical installation on large scale projects that range from new construction, high rise, commercial and retail complexes to large industrial facilities.

Job Description Join Our Growing Electrical Team in the New Jersey Area! Are you an experienced electrician looking for an exciting opportunity with a thriving company? We are a rapidly expanding NYC-based electrical contractor, and we are seeking Mechanics, Jr. Mechanics, and Helpers for immediate hire to work on commercial projects in the Westchester Area. Must have experience with Rigid Conduit Positions Available: • Mechanic: Minimum 4 years of experience, • Jr. Mechanic: Minimum 2 years of experience, • Helpers: Entry-level positions available What We Offer: • Competitive pay rates, • Comprehensive benefits package, • A chance to grow with a dynamic and fast-growing company Requirements: • Must have a valid 30 Hour OSHA, • Strong work ethic and commitment to quality work We are a growing NYC based Electrical Company looking to hire new employees for immediate hire. Min.3 yrs. exp. for Mechanic 2 years Jr. Mechanic and Helpers Competitive rates and benefits paid. Must have 30 Hour OSHA cars SST Card preferred PLEASE CALL 914-313-3009 if you have any questions · Principals only. Recruiters, please don't contact this job poster. · Do not contact us with unsolicited services Company DescriptionMC Electrical is a large private commercial electrical contractor. We do high end retail and large commercial projects with some of New York's largest General Contractors. Pay rate depending on experience. 14 Days Paid days off. Paid time off increases with time spent in the company. Medical benefits if you choose. 401K with up to 4% company matchMC Electrical is a large private commercial electrical contractor. We do high end retail and large commercial projects with some of New York's largest General Contractors. Pay rate depending on experience.\r\n14 Days Paid days off. Paid time off increases with time spent in the company.\r\nMedical benefits if you choose. \r\n401K with up to 4% company match

Job DescriptionSummary: We are representing a commercial HVAC contractor hiring a full-time Service Technician to handle installation, troubleshooting, and repair of HVAC and refrigeration systems across New Jersey. The ideal candidate brings strong mechanical knowledge, excellent problem-solving skills, and is comfortable managing multiple daily service calls independently. This is not an entry-level role—applicants must have solid commercial HVAC experience (not residential-only) and EPA certification. Key Responsibilities: Perform service, repair, and maintenance on HVAC/R systems across multiple job sites per day Diagnose issues and conduct performance tests using multimeters, gauges, and specialty tools Install and repair equipment including split systems, package units, ductless systems, VAVs, PTACs, chillers, and heat pumps Handle refrigerant recovery and charging per EPA guidelines Conduct preventative maintenance visits and promote ongoing service contracts to clients Maintain a clean, organized work area at all times and follow site safety protocols Document all work and communicate findings clearly with customers and office staff Participate in emergency on-call service rotation (1x/month with additional pay and overtime) Qualifications: 3–5 years of commercial HVAC service experience (residential-only background not accepted) EPA certification required (Universal or Type I & II) Trade school or technical HVAC program preferred Skilled in electrical testing, refrigerant diagnostics, control troubleshooting (Distech a plus) Ability to read electrical schematics and service manuals Familiarity with commercial units, chillers, compressors, piping, motors, and controls Must hold a valid NJ driver’s license and have clean driving record Willing to work overtime during peak seasons and participate in monthly on-call rotation Punctual, professional, customer-focused, and self-motivated Compensation + Benefits: Competitive salary based on experience Health, dental, and vision insurance 401(k) with matching PTO including vacation, sick days, and paid holidays Company vehicle and EZ-Pass (if eligible) Company-issued uniforms and cell phone Ongoing training (in-house & school-based) Drug-free workplace (pre-employment drug test required)

LyondellBasellis a leader in the global chemical industry creating solutions for everyday sustainable living. With a nearly 70-yearlegacy that includes a Nobel Prize in Chemistry and our proprietaryMoReTecrecycling technology, LYB is enabling a more sustainable future for generations to come. LYB develops high-quality and innovative products for applications ranging from sustainable transportation and food safety to clean water and quality healthcare. LYB places high priority on diversity, equity and inclusion and is Advancing Good with an emphasis on our planet, the communities where we operate and our future workforce. We'readdressing the global challenges of ending plastic waste, taking climate action, and supporting a thriving society, while generating value for our customers, investors, and society. As a member of the LyondellBasell Edison Site Leadership Team the Maintenance and Reliability Manager is responsible for supervising Maintenance, Reliability for executing work in a safe, reliable, cost-efficient, and environmentally responsible manner to achieve site and company goals. They will participate on the Edison Site Leadership Team to develop strategic plans, annual goals, drive gap closure efforts, and ensure alignment of plant activities with global manufacturing goals and the company strategic plan. They will participate on corporate teams to champion and implement corporate level strategic initiatives and goals. • Deliver GoalZERO performance through strong leadership, employee/contractor engagement, and management systems, • Provide overall guidance for long range programs defining strategic direction for mechanical integrity, inspections, and site development, • Enhance and administer a consistent system of measurement geared towards improving the effectiveness of reliability and proactive initiatives, • Adhere to regulatory and corporate standards by assessing gaps and opportunities and tracking progress toward compliance and continuous improvement, • Prepare and manage budgets in a cost efficient and responsible way to meet site goals and needs, • Lead, direct, and coach organization members in achieving business results and continuous improvement, • Interface with a diverse group of domestic customers including manufacturing, project management, turnaround, purchasing, and business functions on reliability/maintenance initiatives and projects, • Engage with department engineers, inspectors, and specialists to acquire, develop, and retain top talent, • Ensure Code of Conduct and all other LyondellBasell policies are consistently followed and administered, • Engineering BS degree with typically 10 years of experience working in refining, petrochemical or chemical manufacturing., • Demonstrated leadership ability gained through prior management and/or supervisory assignments., • Knowledgeable in broad technical areas such as - rotating equipment, fixed equipment, electrical equipment, instrumentation and analyzers., • Knowledge of business support functions and processes including SAP, purchasing, quality assurance, marketing, manufacturing accounting and budgeting practices and human resources., • Excellent written / oral communication skills with the ability to interface and communicate effectively with all levels of the organization and with external customers., • Working knowledge and understanding of company policies, health, safety and environmental requirements, operations, MOWP and other maintenance work processes referred Skills/Experience., • Understanding of budgeting and return on investment justification process/analysis., • Demonstrated proficiency in the following competencies: Strategic Leadership, Drives Results, Collaborates, Builds Effective Teams, Drives Improvement in Others, Champion of Change,, • Communication Effectiveness, Systemic Thinking., • Represents the Edison site with regard to managing a labor contract, participating in the grievance process and assisting with contract negotiations., • Collaborates with Human Resources and Edison Site Leadership team on labor relations management and personnel matters. LyondellBasell is proud to provide a competitive total compensation package designed to reward excellence and support the well-being of our employees. Our Total Rewards package includes equitable and market-competitive base pay as well as locally relevant incentives, fostering a culture of pay-for-performance that recognizes both individual and company achievements. We extend the following benefits to *eligible employees: Workplace Flexibility: The Company's Global Remote Work Policy allows eligible employees to request to work remotely up to two full days per standard work week at an approved location other than the designated worksite or office, such as at a home office with managerial approval. Comprehensive Health, Welfare, Life and Retirement Programs: Our comprehensive programs are aligned with local practices. 6% LYB match on 401(k) contribution 5% LYB cash balance pension plan accrual Comprehensive Well-being Benefits: Programs to support your physical, mental, financial, and social health, ensuring you receive the care you need, when you need it. Employee Stock Purchase Plan: The LYB ESPP offers a 10% discount on LYB stock for eligible employees in Germany, Italy, Netherlands, Spain, and US. Educational Assistance Program: To encourage self-development by providing financial aid for approved educational activities voluntarily undertaken by employees. Bravo Rewards Program: Recognizing outstanding employee contributions. Robust Medical and Life Insurance Packages: Offering a variety of coverage options to meet individual needs. Professional Development: Opportunities to learn and grow through training, mentoring, work experiences, community involvement, and team building activities. Competitive Vacation Policies: Generous annual leave to support your work-life balance. Global Adoption Policy: Support for employees expanding their families. Matching Gifts Program: Enhance the impact of your charitable contributions to qualified organizations. *Eligibility for certain benefits and rewards programs will vary based on your job status, work location and/or the terms of any applicable collective bargaining agreement and may be changed from time to time without notice, subject to applicable law. Build PartnershipsDrive InnovationGrow CapabilitiesPromote InclusionMotivational FitTechnical SkillsDeliver Results Learn more about our benefits Stay Connected! • Visit our LYB_, • Follow us onand, • Like us on_, • Subscribe to our_channel LyondellBasell is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, disability, age, veteran status, and other legally protected characteristics. The US EEO is the Law poster is available_. LYB is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need assistance or an accommodation related to LYB's recruiting process, please email us at Careers@lyb.com. Applicants must be at least 18 years old. LyondellBasell does not accept or retain unsolicitedresumes or phone calls and/or respond to them or to any third party representing job seekers. . Regulatory Disclosure • The compensation and reference to benefits for this role is listed on this posting in compliance with applicable law. Please note that the compensation and benefits listed below are only applicable for U.S. payroll offers., • The anticipated salary range for this position is $146,880 - $201,960. The selected candidate's compensation will be determined based on their skills, experience, and qualifications.

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility, • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A Maintenance and Reliability Engineer, to serve as a key technical resource supporting clients in optimizing maintenance and reliability programs, driving performance improvements, and sustaining asset health. You will balance hands-on maintenance leadership with analytical reliability strategies that reduce downtime, extend asset life, and improve overall equipment effectiveness (OEE). This is an on-site position with occasional travel up to 25% of the time. You will report directly to our Maintenance and Reliability Service Leader. Responsibilities Essential Duties and Responsibilities • Adhere to stringent regulatory requirements, such as FDA regulations, ensuring all activities and equipment meet industry standards for quality and safety., • Lead and execute preventive and predictive maintenance activities on production, utility, and process equipment., • Conduct data-driven analyses of equipment reliability trends and develop improvement recommendations., • Implement and sustain CMMS processes including PM optimization, asset hierarchies, and work management best practices., • Support and facilitate root-cause analysis (RCA) and corrective action implementation., • Partner with cross-functional teams (engineering, operations, quality, EHS) to align M&R initiatives with business goals., • Support regulatory compliance (FDA, GMP) and ensure documentation meets company and industry standards., • Coordinate vendor and contractor support for maintenance and reliability improvement activities., • Contribute to MRO spare parts management, bill of materials accuracy, and lifecycle cost reduction., • Participate in continuous improvement and digital transformation initiatives leveraging data visualization, AI, or BI tools. Qualifications Required Knowledge, Skills and Abilities • 3 – 5 years of experience in maintenance and/or reliability engineering., • Experience with either SAP or Hexagon is preferred., • Demonstrated experience in preventive and predictive maintenance programs., • Working knowledge of reliability analysis methods and continuous improvement tools., • Proficiency with Computerized Maintenance Management Systems (CMMS)., • Understanding of mechanical, electrical, pneumatic, and hydraulic systems., • Experience with MRO and spare parts management and BOM development., • Knowledge of EHS and GMP regulations., • Familiarity with Business Intelligence tools (Spotfire, Power BI, Tableau) or AI technology., • Strong verbal, written, and presentation skills; proficiency in Microsoft Office platforms (Excel, Word, PowerPoint)., • Able to travel up to 25% of the time. Preferred: • Bachelor’s or Associate degree in a STEM field or trade certification in instrumentation, mechanical, electrical, or related engineering field., • Life Science experience., • Certified Reliability Leader (CRL) or Certified Maintenance & Reliability Professional (CMRP) certification. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Job Description Applied Business Communications (ABcom) is a national low voltage BICSI Certified Prestige commercial structured cabling contractor and we are recruiting a Data Center Technician. “We Connect” relationally and technically. And, we do it within the framework of our corporate values: Family, Accountability, Profitability, Integrity, and Quality. Position is immediately available. Apply now to join our great team today! Requirements Essential Functions: • Perform Cages, Racks and Cabinets setup, layout, leveling and power strip installation., • Installation and termination of Fiber and Copper, • Installation of patch cords, • Performs installation of wiring, patch panel and network switch, hub, and console, • Ability to read and understand cabling matrix, • Perform Rack and Stack for various IT equipment when required on a day to day basis, • Uncrates, moves, equipment from loading dock., • Provide support to collocation customers, provide prompt response to customer requests., • Perform required Site inspections., • Work with vendors performing electrical ensuring that all work is performed according to established practices and procedures., • Understand, update and execute detailed Method of Procedures (MOPs), • Maintain data center operating procedures, • Maintain accurate records and document all problems, • Able to work night and weekends when needed SKILL/KNOWLEDGE REQUIREMENTS: • 3+ years experience running projects in the communications cabling Industry, • Data Center experience, • Demonstrate a clear knowledge of codes and standards, • Ability to complete and submit accurate documentation which tracks work progress including timesheets and other related documents, • Communicate with strong written and verbal skills, • Maintain a positive attitude and professional dress and demeanor CERTIFICATION (desired): • BICSI Certified Technician -- Installer 1 or 2, Copper and/or Fiber, • Other manufacturer certifications, • Other certifications such as OSHA, Confined Space, etc. TOOLS: Owns all company required communications technician hand tools, keeps them in good operating condition, and knows how to use them

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit www.ej1899.com. Title/Role: Project Manager Division: Clean Energy | Large Specialty Projects Location: South Plainfield, NJ Reporting to: Position Summary: We are seeking a skilled and experienced Electrical Project Manager to join our team. The ideal candidate will oversee and coordinate projects, ensuring they are completed on time, within budget, and in compliance with E-J's safety regulations and quality standards. Responsibilities include planning, monitoring progress, and providing updates to stakeholders, clients, and team members. As a Project Manager at E-J, you will collaborate with diverse teams, communicate effectively with clients, subcontractors, and vendors, and play a key role in delivering successful electrical projects for our valued clients. What You’ll Do: • Create and manage project schedules, milestones, and deliverables to ensure timely project completion, • Provide regular project updates to clients and stakeholders, informing them of project status, risks, and milestones, • Liaise with field supervision, • Attend and run project meetings, • Maintain accurate project documentation, including progress reports, change orders, and project closeout documents, • Estimating, • Address any project-related issues, conflicts, or delays promptly and effectively, seeking solutions that maintain project progress, • Develop comprehensive project budgets, monitor costs, and implement cost-saving measures when possible, • Procure and coordinate necessary materials, equipment, and subcontractors for each project, • Identify areas of process improvement and implement best practices to enhance project efficiency and profitabilityQualifications:, • Minimum of 5 years of project manager experience required, • Proficiency in Microsoft Suite in addition to project management software; E-J currently uses Procore, Emque, Riskcast, Toric, and more, • Bachelor's degree or equivalent work experience in the electrical contracting/engineering space, • Strong organizational & multi-tasking skills with attention to detail, • Practical knowledge of construction, • Strong business acumen in project planning and management, • Excellent written and verbal communication skills, • Practical knowledge of construction processesAdvantages of Working at E-J:, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $85k-$115k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR lBjpTKSJFv

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Building Commissioning to join our team. The Energy Engineer (Commissioning) will support and execute new construction commissioning (Cx) and retro-commissioning (RCx) projects across a portfolio of commercial, institutional, and multi-family buildings. This role focuses on verifying that building systems are designed, installed, tested, and operated to meet the Owner's Project Requirements and applicable code, certification, and performance criteria. Responsibilities • Develop Commissioning Documentation: Author commissioning plans, Owner's Project Requirements (OPR) summaries, Basis of Design (BOD) reviews, issues logs, and final commissioning reports., • Perform Design and Submittal Reviews: Review drawings, specifications, sequences of operation, and contractor submittals to identify deficiencies, design intent gaps, and commissioning impact items., • Create Pre-Functional and Functional Checklists: Develop equipment-specific Pre-Functional Checklists (PFCs) and Functional Performance Test (FPT) scripts for HVAC, plumbing, electrical, controls, and life safety systems., • Conduct Site Visits and Construction Observation: Perform installation verification site visits, document open issues, and coordinate with general contractors, mechanical/electrical contractors, controls vendors, and TAB agents., • Execute Functional Performance Testing: Lead and witness FPTs of air-side, water-side, BAS, lighting controls, and emergency power systems; verify sequences of operation and proper system response., • Support Retro-Commissioning Studies: Conduct onsite performance testing of existing building systems, identify Retro-Commissioning Measures, and quantify low- and no-cost operational savings., • Develop Systems Manuals and Training: Compile systems manuals and assist with O&M training to support owner handoff., • Support Certification and Compliance: Support LEED Fundamental and Enhanced Commissioning, ASHRAE Guideline 0/1.1/1.5, and project-specific certification requirements. Requirements • Bachelor's in Engineering (Mechanical, Electrical, or Facilities), • 1-3 years of experience in commissioning, MEP design, construction, or energy engineering, including at least one internship, co-op, or full-time role, • Working understanding of HVAC equipment (AHUs, chillers, boilers, VRF, VAV, terminal units), BAS sequences of operation, and basic electrical systems, • Familiarity with construction documents, specifications (CSI MasterFormat), and submittal review, • Exposure to LEED commissioning requirements and/or ASHRAE Guideline 0 preferred, • Comfortable working onsite in active construction environments (PPE required), • Proficient in Microsoft Office and PDF markup tools (Bluebeam, Adobe), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CxA, BCxP, or LEED AP credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit www.ej1899.com. Title/Role: Senior Project Manager Division: Clean Energy | Large Specialty Projects Location: South Plainfield, NJ Reporting to: Position Summary: The ideal candidate will plan, coordinate, and implement projects within the estimated budget, timeline, and scope. They will also effectively monitor and present project updates to relevant stakeholders, clients, and project team members. We are seeking a skilled and experienced electrical Senior Project Manager to oversee and manage projects from inception to completion. The successful candidate will coordinate and supervise all electrical aspects of the projects, ensuring they are completed on time, within budget, and in compliance with safety regulations and the quality standards of E-J. As a Project Manager at E-J, you will collaborate with various teams, communicate effectively with clients, subcontractors, and vendors, and play a crucial role in delivering successful electrical projects for our esteemed clients. Responsibilities: • Evaluate project team performance, providing feedback, coaching, and training, • Define roles and responsibilities for and manage required project staff including assistant project managers, field engineers, project engineers, and administrative assistants., • Ensure accurate project documentation is being maintained by project staff, such as progress reports, submittal/RFI/correspondence logs, monthly billing, and project closeout documents., • Attend and run project meetings, collaborating with clients, architects, engineers, and other stakeholders to understand project requirements and objectives, • Address any project-related issues, conflicts, or delays promptly and effectively, seeking solutions that maintain project progress, • Create and manage project schedules, milestones, and deliverables to ensure timely project completion, • Maintain accurate project documentation including progress reports, submittals, RFIs, correspondence logs, monthly billing and project closeout documents, etc., • Identify, estimate, prepare, and negotiate change orders, • Develop comprehensive project budgets, monitor costs, and implement cost-saving measures when possible, • Liaise with field supervisionQualifications & Skills:, • Minimum of 10 years of project manager experience required, • Proficiency in Microsoft Suite in addition to project management software; E-J currently uses Procore, Emque, Riskcast, Toric, and more, • Skilled in multiple platforms, with the ability to learn, use, and teach others; tech-forward, • Bachelor's degree or equivalent work experience in electrical contracting/engineering space, • Strong organizational & multi-tasking skills with attention to detail, • Practical knowledge of construction, • Strong business acumen in project planning and management, • Excellent written and verbal communication skills, • Practical knowledge of construction processesAdvantages of Working at E-J:, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $125K-$150k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR UvNAcf9MhQ

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Site Safety Manager is responsible for the safe and accident-free operation of their site. This includes identifying any potential safety hazards and implementing plans to prevent these dangers. Primary Duties/Responsibilities: • Coordinates and administers the Site Heath, Safety, environmental and Security Program for multiple locations., • Investigates unsafe conditions and incidents, performs plant safety, security and environmental inspections and coordinates the corrective actions towards resolution., • Ensure sites of responsibilities comply with Federal, State, Local & Veolia’s Health & Safety Standards., • Recognize potential hazards and risks by implementing daily, weekly, monthly walkthroughs., • Conduct Monthly Safety Inspection Reports and track findings to closure., • Report hazards and regulatory concerns to Project Managers & Regional VP of Operations., • Ensure that all employees, subcontractors/vendors and visitors comply with applicable Veolia’s H&S policies & procedures., • Complete, track and investigate incident/injury reports, near misses., • Conduct root cause analysis investigations and develop corrective actions for all incidents., • Develop and review site-specific safety related written SOPs and Job Safety Analysis (JSA)., • Ensure H&S files (documentation) are maintained to include training records, equipment inspection logs, industrial hygiene evaluations, and procedures certifications., • Be accessible and visible to the employee population by monitoring, evaluating and addressing employee safety concerns and issues., • Coordinate and monitor monthly site safety committee meetings., • Deliver and distribute employee safety training requirements, safety alerts and monthly awareness., • Communications, concerns and suggestions., • Provide new employee and contractor safety orientations., • Ensure compliance and monitor requirements with the Process Safety Management (PSM) Standard., • Coordinate site specific emergency planning programs. Develop and review site emergency programs (fire, hurricane, chemical spills, etc.)., • Implement fire and emergency drills., • Participates and coordinates all visits of federal, state and insurance inspectors and follows up on their recommendations.Qualifications Education/Experience/Background: • Associate’s Degree or equivalent., • Bachelor’s degree in occupational or environmental health strongly preferred., • Experience in developing and coordinating safety programs and delivering safety training is a plus. Knowledge/Skills/Abilities: • Working knowledge of OSHA (Occupational Safety and Hazards Administration) regulations and requirements., • Working knowledge of State and Federal laws, local ordinances, and other rules and regulations associated with facility and employee safety and security., • Competent to implement site specific safety procedures; i.e.; Hazard Communication, Process Safety Management, Electrical Safety, Emergency Management plan, etc., • Must complete a physical fitness test to wear a respirator (if applicable) and any required safety equipment necessary to perform these duties., • Must demonstrate the ability to handle multiple tasks and changing priorities in a fast-paced environment., • Requires competency with software applications including Word, Excel and PowerPoint with ability to download, manipulate and report data. Ability to learn other programs including Caribou, OPS32, MP-2 and Triple-I database software., • Must demonstrate effective communication skills (verbal, presentation and listening) to interact with all levels of personnel., • Demonstrated ability to prepare accurate, effective, complete and easily understood written communications and reports., • Must be able to respond to emergencies at the plant during off hours and weekends. Required Certification/Licenses/Training: • Certified on first-aid and CPR., • Must have and maintain a valid driver’s license. Additional Information Pay Range: $100000 to $110000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 5% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Company Summary Compliance Management International (CMI) is a premier global provider of environmental, health, and safety (EHS) services, serving clients of all sizes for over 30 years. We collaborate closely with organizations, including Fortune 500 companies and governments, to enhance performance by offering integrated support that prioritizes productivity and growth while minimizing risks and ensuring regulatory compliance. Company Offerings At CMI, we believe in building more than just careers—we cultivate a workplace where people thrive. Whether you're looking for full-time stability, part-time flexibility, contract work, or a direct placement opportunity, we offer a variety of career paths to fit your life and goals. Full-time team members enjoy a comprehensive benefits package that includes medical, dental, and vision coverage, a 401(k) with company match, and employer-paid life insurance. We also provide short-term and long-term disability coverage, voluntary life insurance for employees and their families, generous paid time off, 9 paid holidays, and annual performance bonuses. But the benefits don't stop there. We invest in your future with paid training, educational opportunities, and a strong focus on career development. Our inclusive culture, commitment to safety, and appreciation for hard work create an environment where everyone can succeed. No matter your employment type, at CMI, you're part of a team that values integrity, collaboration, and growth. Join us and discover what it means to work for a company that truly values its people. Job Title: Construction Safety Professional Job Summary: Compliance Management International (CMI) is committed to delivering best-in-class safety support across construction projects. Our Construction Safety Professionals partner directly with General Contractors to implement effective safety programs, ensure regulatory compliance, and promote a proactive, site-wide safety culture. This role requires strong field presence, leadership capability, and the ability to collaborate across multiple trades and stakeholders Key Responsibilities: • Serve as a safety resource to the General Contractor, subcontractors, and project team, • Mentor, coach, and train field personnel on OSHA standards, company policies, and industry best practices, • Promote and sustain a positive safety culture through active engagement with workers and site leadership, • Participate in and support daily, weekly, and monthly safety meetings as required by the project, • Conduct routine site safety inspections, audits, and observations; identify hazards and recommend corrective actions, • Lead and support safety processes including pre-task planning (PTP), Job Safety Analyses (JSAs), permit programs, and incident investigations, • Facilitate new hire orientations, toolbox talks, and task-specific training, • Monitor compliance with OSHA 29 CFR 1926 standards and site-specific safety requirements, • Prepare and maintain accurate safety documentation, reports, and metrics for project leadership Requirements & Experience: • Minimum of 5+ years of construction safety experience, preferably supporting a General Contractor, • Safety oversight on a Pharmaceutical construction build is required, • Strong working knowledge of OSHA construction standards (29 CFR 1926), • Working knowledge of high-risk activities (e.g., electrical safety, fall protection, confined space, crane operations, etc.), • Proven ability to influence and collaborate with field teams, supervisors, and management, • Strong hazard recognition, risk assessment, and problem-solving skills, • Effective verbal and written communication skills, • Proficiency with Microsoft Office and/or safety management systems, • Ability to work over-time to inlcude Saturdays Education & Certifications: • OSHA 30-Hour Construction Certification (required, within the last 5 years), • First Aid, CPR, and AED Certification (required), • OSHA 510 required, • BCSP certifications (STS-C, CHST, CSP) preferred, • OSHA 510/500, NFPA 70E, or other relevant certifications preferred, • Degree in Occupational Health & Safety or related field preferred Physical Requirements & Work Conditions: This position requires active field presence on construction sites. Duties include standing, walking, climbing ladders, working at heights, entering confined spaces, and navigating uneven terrain throughout the workday. The role may involve lifting up to 30 lbs. and working in varying weather conditions, including extreme heat, cold, wind, or precipitation. Reasonable accommodations will be considered in accordance with applicable regulations. Additional Requirements: • Ability to work flexible hours, including overtime, based on project needs, • Reliable transportation and residence within a reasonable commuting distance (project-specific travel/per diem to be defined as needed) Equal Opportunity Employer Compliance Management International (CMI) is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, national origin, disability, veteran status, or any other legally protected status. Position Disclaimer This job description is intended to provide a general overview of the responsibilities and requirements of the role. It is not an exhaustive list and may be subject to change at any time to meet the needs of the organization. Management reserves the right to assign or reassign duties and responsibilities as necessary. Click here to learn more about Compliance Management International (CMI)

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit www.ej1899.com. Title/Role: Estimator Division: Clean Energy Location: South Plainfield, NJ Reporting to: Operations Manager Position Summary: E-J’s Estimators are crucial in the pre-construction phase, providing accurate and competitive cost estimates for electrical projects across various industries. Your expertise in estimating and pricing will help drive successful project bids, ensuring the company’s continued growth and success in the market. What You’ll Do: • Review and analyze project plans, specifications (including drawings and schedules), and other relevant documents to gain a comprehensive understanding of the project's scope and requirements, • Prepare detailed and accurate cost estimates for projects, encompassing labor, materials, equipment, subcontractor services, and other associated expenses, • Utilize industry-standard software and tools (McCormick, BLUEBEAM) to generate estimates, ensuring precision and consistency in the estimation process, • Account for factors such as market conditions, labor rates, and material costs, • Collaborate with the bid team to develop comprehensive bid proposals, ensuring compliance with client requirements and specifications, • Participate in bid meetings and presentations, providing insights into the estimation process and the rationale behind pricing decisions, • Solicit and evaluate quotes from suppliers and subcontractors to secure competitive pricing for materials and services, • Develop and maintain strong relationships with vendors and subcontractors to obtain pricing and information, • Prepare regular reports and summaries on cost tracking and estimating accuracy, • Collaborate with the Engineering and Project Management Teams to clarify any ambiguities and gather necessary information for accurate estimation, • Share insights and best practices with the team to enhance overall estimating capabilitiesQualifications:, • Minimum of 5 years of experience working in electrical estimating, • Bachelor’s degree in electrical engineering, construction management, or a related field/equivalent experience is preferred, • Proficient in the Microsoft Suite, • Proven experience as an electrical estimator in the construction industry, preferably with expertise in electrical systems and installations, • Strong knowledge of electrical construction practices, materials, and methodologies, • Familiarity with industry-standard estimating software and tools (McCormack, Bluebeam), • Excellent analytical and mathematical skills with keen attention to detail, • Effective communication and interpersonal abilities to collaborate with internal teams, clients, vendors, and subcontractors, • Ability to work under pressure and meet tight deadlines in a fast-paced, dynamic environment, • Familiarity with the local construction market and regulations is advantageous, • Highly motivated team player, • Practical knowledge of construction (new & renovation)Advantages of Working at E-J:, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $85k-$115k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR UE7mn516y4

Job Description JOB DESCRIPTION: • Perform high-quality repair and maintenance on Caterpillar equipment., • Diagnose and troubleshoot mechanical, electrical, and hydraulic issues., • Expected to complete tasks with no/limited supervision., • Remove, install, disassemble, and assemble components., • Adhere to safety standards to include contamination control and HAZMAT regulations., • Verified findings, review readings of gauges and procedures and compare to manufactured specs., • At the end of shift, secure all equipment and machinery and complete all required paperwork., • Willingness to learn and adapt to new technologies and procedures., • Paint Prep and painting abilities. RECOMMENDED QUALIFICATIONS: • Experience with Cat/Non-Cat construction equipment., • Must be able to multitask., • Assist parts department in researching and ordering needed parts., • Strong Computer skills preferred, knowledge of SisWeb and ET is a plus., • Excellent communication and interpersonal skills., • Well-developed technical and troubleshooting skills with strong analytical problem-solving skills. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Forest Electric NJ is seeking a Purchasing Assistant to support the Company in meeting its objectives and goals with the acquisition and procuring of various electrical goods, materials, devices, equipment and other items for commercial construction projects at various locations within New Jersey. H

Job Description Company Description Engineering Driven Design PC provides expert engineering services with a focus on simplifying the engineering process for clients. The company specializes in HVAC, electrical, plumbing, and fire protection engineering services, ensuring minimal client involvement in managing the engineering aspects of construction projects. By leveraging its broad knowledge base, Engineering Driven Design adds significant value to construction projects, emphasizing efficiency and reliability. Position Overview We are seeking a Senior Electrical Engineer with 3–6 years of experience in building systems design who is ready to take technical ownership of projects and play a key role in delivering high-quality, coordinated electrical designs. This position is ideal for an engineer who has progressed beyond basic production work and is comfortable leading electrical design efforts, coordinating directly with other disciplines, and supporting client and contractor communication. This is a full-time, in-office role based in Iselin, NJ. ⸻ Key Responsibilities • Lead the design of power distribution, lighting, and low-voltage systems for commercial, institutional, and industrial projects, • Perform and oversee load calculations, short circuit analysis, equipment selection, and system sizing, • Develop and review single-line diagrams, panel schedules, lighting layouts, and technical specifications, • Ensure compliance with NEC and applicable codes and standards, • Coordinate closely with mechanical, structural, and architectural disciplines, • Identify and resolve design conflicts proactively, • Review and guide junior staff in drawing production and technical accuracy, • Support construction administration efforts including submittals, RFIs, and field coordination, • Communicate effectively with clients, contractors, and utility providers ⸻ Qualifications • Bachelor’s degree in Electrical Engineering (required), • EIT certification required, • PE license preferred or actively pursuing licensure, • 3-6 years of experience with an engineering consulting firm or electrical contractor, • Demonstrated experience leading electrical design on projects from concept through construction, • Strong working knowledge of NEC and applicable building codes ⸻ What Sets You Apart We are looking for an engineer who: • Takes ownership of their projects and stands behind their work, • Thinks beyond minimum compliance toward practical, buildable solutions, • Anticipates coordination issues instead of reacting to them, • Is comfortable making sound technical decisions, • Wants to grow into increased technical authority and long-term leadership within the firm ⸻ Technical Requirements • AutoCAD proficiency (required), • Revit experience (strongly preferred), • Experience with power system analysis software is a plus ⸻ Growth Opportunity This role provides the opportunity to expand technical leadership, mentor junior team members, and increase involvement in client coordination and project delivery strategy over time.

Job Description Position Overview The Sales Representative is responsible for generating new business and maintaining relationships with existing clients for electrical contracting services. This role focuses on identifying project opportunities, preparing estimates, and coordinating with the operations team to ensure customer needs are met from initial contact through project completion. Key Responsibilities • Identify and pursue new sales opportunities in residential, commercial, and/or industrial electrical services., • Develop and maintain relationships with contractors, property managers, developers, and homeowners., • Meet with prospective clients to assess project needs and provide solutions for electrical installations, repairs, and upgrades., • Collaborate with project managers and electricians to ensure accurate project scope and scheduling., • Follow up on leads, bids, and proposals to close sales and secure contracts., • Maintain accurate records of client interactions, proposals, and sales activities., • Stay informed on industry trends, electrical systems, and new technologies., • Represent the company professionally at networking events, site visits, and client meetings. Qualifications • Previous experience in sales, preferably in construction, electrical, or related trades., • Strong communication, negotiation, and relationship-building skills., • Basic understanding of electrical systems or construction processes is a plus., • Ability to read plans or work with estimates is preferred., • Self-motivated with strong organizational and time management skills., • Valid driver’s license and ability to travel to job sites or client meetings as needed. Preferred Skills • Experience with estimating or bidding projects., • Knowledge of commercial and residential electrical work.Company DescriptionWe provide quality electrical installation on large scale projects that range from new construction, high rise, commercial and retail complexes to large industrial facilities.We provide quality electrical installation on large scale projects that range from new construction, high rise, commercial and retail complexes to large industrial facilities.

Strong mechanical and electrical problem-solving ability. Troubleshoot and repair electrical systems, including PLCs, motors, and VFDs. Read and interpret blueprints, schematics, and electrical diagrams.

Inspects, tests and repairs electrical systems, electrical components used in heating and air conditioning systems, clock systems, pneumatic tube systems and other electronic equipment. Work Environment: The individual in this position may be exposed to environmental conditions such as wet or humid

Investigate mechanical, operational, and electrical issues and take corrective action. Create and maintain up-to-date layouts of electrical circuits. Strong troubleshooting skills and knowledge of industrial electrical systems.

Install, maintain, and repair electrical systems supporting HVAC, mechanical, and building automation equipment on commercial and industrial job sites. Read and interpret blueprints, electrical schematics, one-line diagrams, and control diagrams. Troubleshoot electrical issues related to mechanical

A comprehensive understanding of electrical equipment and operations normally acquired through an electrical apprentice program or similar on-the-job training and 3-5 years of related electrical experience. Performs a variety of skilled electrical work including installation, maintenance, inspection

Perform other electrical job-related duties as need. Able to read electrical schematics. Installs, repairs/ replaces, and tests associated electrical circuits and equipment using appropriate tools and testing instruments.

Residential & Commercial Property Maintenance Services Professional.A successful Residential & Commercial Property Maintenance Services Professional is expected to visit properties, perform interior and exterior property maintenance for our residential and commercial customers.The properties range f

Responsible for performing a wide range of electrical tasks, including estimation, procuring appropriate materials and repairing and installing electrical circuits, wiring, fixtures and controls. May guide and instruct a group of craft trainees in the performance of a wide range of electrical duties

A comprehensive understanding of electrical equipment and operations normally acquired through an electrical apprentice program or similar on-the-job training and 3-5 years of related electrical experience. Performs a variety of skilled electrical work including installation, maintenance, inspection

A strong working knowledge of electrical components used in an industrial environment.

Property Maintenance Service Technician.A successful Property Maintenance Service Technician is expected to visit properties, perform interior and exterior property maintenance.You should have excellent customer service skills, troubleshooting skills, field experience, and the ability to adapt to a

The Electrical Project Manager / Estimator is a hybrid role responsible for both preconstruction estimating and full-cycle project management of electrical construction projects. Coordinate with field teams, subcontractors, and suppliers to ensure timely execution. Bachelor's degree in Construction

This role leads electrical installations on high-end retail and large commercial projects, ensuring safe, code-compliant, and high-quality work. You apply strong technical knowledge of electrical systems, codes, and safety practices to deliver reliable installations on schedule. Read and interpret e

The essential function of the Electrical Service Technician is to provide general electrical repair and services to Gold Medal's customers. Troubleshoot, diagnose, install and repair electrical components in a residential environment. Knowledge of local electrical codes and ability to apply them in

Property Maintenance Service Technician.A successful Property Maintenance Service Technician is expected to visit properties, perform interior and exterior property maintenance.You should have excellent customer service skills, troubleshooting skills, field experience, and the ability to adapt to a

Plumbing Technician NO ON-CALL - CHOOSE YOUR SHIFT.At Gold Medal we pride ourselves in creating an excellent working environment by hiring the best technicians, training them better than anyone, and creating an environment where our technicians are our number one priority.Reasons you will love work

Delivery Driver / Up to $31 per hour] - Choose Your Own Hours / Earn Guarenteed Minimums + 100% of Your Tips / Daily Pay & Instant Cashout - Skipcart is hiring delivery drivers for immediate positions in various locations across the country.As a Skipcart Delivery Driver, you will: Pick up customer o

Amazon Delivery Drivers - - Responsibilities: Deliver customer packages to homes, retail, and business locations; Adhere to safety and quality standards on and off the road; Interact professionally with customers and general public; Use handheld technology to manage delivery progress and resolve ob

Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues. Support OEM installations, upgrades, and contractor work.

Amazon Delivery Drivers - 8 B Court South - Responsibilities: Load, unload, prepare, inspect and safely operate a delivery vehicle; Deliver Amazon packages to multiple addresses climbing in and out of the vehicle, and walking upstairs and through driveways in all weather conditions; Use smartphones

Under direction, does varied types of work involved in the installation, inspection, repair, servicing, and maintenance of electrical equipment, appliances, machinery, and circuits; does related work as required.

Amazon Delivery Drivers - - Responsibilities: Operate commercial motor vehicles to deliver packages; Deliver up to 200 deliveries per day; Load 19.Provide top-tier customer service; Follow daily route schedules using GPS technology.

Amazon Delivery Drivers - - Responsibilities: Safely drive and operate company 20 and 30-foot box trucks at all times; Load and unload delivery vehicles with packages to be delivered; Oversee a team of up to 6 on-foot delivery associates as they deliver the packages from the truck; Use handheld dev