Electrical technology jobs in New Rochelle, New YorkCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate, • Any additional job duties that may be assigned by the Supervisor., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist, • Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work, • Physically able to frequently (100-200 times) twist at the waist to perform work Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order, • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs, • Assists with the start-up of new equipment and maintain current systems and adjusts as needed to ensure the system is operational, • Installation of new equipment, plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations, • Presents a professional image both in personal and vehicle appearance, • Performs work assignments in a safe manner in conjunction with site safety requirements, • Promotes, builds, and maintains good customer relations and assists with contract retention, • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements, • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested., • Reports directly to client site Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Door Hardware troubleshooting, • Locking Systems, • Automatic doors openers, • Video Systems (IP Camera's), • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • CCure9000 experience, • Victor experience, • Axis IP Cameras, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call after hours & weekend emergency calls, • A valid state driver’s license, without restrictions, is required Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Lenel Certification preferred or hands on experience, • Verint Certification preferred or hands on experience, • Avigilon, • Genetec, • ProWatch, • AXIS IP Cameras, • Door Hardware troubleshooting, • Automatic doors openers, • Video, • Camera Troubleshooting, • Lead Installation, programming, and maintenance of Honeywell ProWatch access control systems, • Configure, troubleshoot, and optimize Genetec Security Center and platforms, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Want to build a brighter, bolder future and cultivate your career? Join Ecolab’s team and help create a world in which we all thrive. Our Institutional team enhances customer success in sectors like hospitality, foodservice, long-term care, commercial, education, and government by focusing on satisfied guests, protected reputations, and efficient operations. Committed to building lasting relationships, we leverage our industry expertise and science-based guidance in cleanliness, food safety, and public health. Through our collaborative partnerships, we empower customers to elevate their service and ensure the highest safety standards. Ecolab is seeking a Field Service Technician to join our team in the Bronx, NYC market. We offer comprehensive chemical products and solutions to meet the needs of customers across the food service and hospitality industries. As a Service Representative, you will service a variety of restaurants, hotels, and long-term care facilities through heavy installations and maintenance on ware washing, laundry and dispensing systems to drive a positive guest experience and create cleaner, safer and healthier environments. How You’ll Make an Impact: Install, repair, and perform maintenance on ware washing, laundry and dispensing equipment and systems Service intensive support within assigned district, role is not aligned to a specific territory/route Communicate Ecolab’s total value to the customer and strengthen the relationship Manage equipment, parts, and inventory to control costs Position Details: This is a field-based position and may require travel to the following locations and surrounding areas: Bronx, NYC Westchester, NY Work Schedule: Monday - Friday, 8:00 AM to 5:00 PM What’s Unique About This Role: Access to best-in-class resources, tools, and technology Thrive in a company that values a culture of safety to include top-notch safety training and personal protection equipment Paid training program where you will learn from subject matter experts with proven success Receive a company vehicle for business use Gain Ecolab service ability (maintenance, troubleshooting and installations) and product and equipment knowledge by customer segment Minimum Qualifications: High School Diploma or equivalent 2 years of mechanical service-related experience Position requires a current and valid Driver’s License with no restrictions No Immigration Sponsorship available for this position Availability to work overnight shifts and provide emergency call assistance which may occur at night, on weekends and over holidays Physical Requirements of Position: Lifting 75 lbs Pushing/pulling Standing/bending/stooping Working in confined spaces Distinguishing color (tools may be accommodated) Driving a company vehicle as required to perform job duties Ecolab is committed to providing reasonable accommodation to qualified individuals with a disability. Preferred Qualifications: Associate’s degree or other advanced education or certifications Previous mechanical problem-solving experience (e.g. plumbing, electrical, HVAC and/or mechanical experience) in industries related to food service, laundry, housekeeping, hospitality and/or pool and spa What’s in it For You: Starting on Day 1: Access to our comprehensive benefits package including medical, dental, vision, matching 401K, company-paid pension, stock purchase plan, paid parental leave, select discounted childcare resources, and more! The opportunity to take on some of the world’s most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments. The ability to make an impact and shape your career with a company that is passionate about growth. The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best. About Ecolab: At Ecolab, we prioritize our talent-first philosophy by creating the most capable and diverse team to excel at our nearly three million customer sites. Building on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. Our solutions not only enhance operational efficiency but also contribute to sustainability and public health, making a positive impact on the world. We are committed to eliminating unnecessary complexities and embracing a beginner's mindset, continuously seeking new perspectives and innovative solutions to stay ahead in a rapidly changing world. Annual or Hourly Compensation Range The pay range for this position is $62,500-$93,800. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws.Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Job Description Beware of Recruitment Fraud: We are committed to protecting job seekers from recruitment fraud. Please be aware that all official communication regarding opportunities with our firm will come exclusively from an email address ending in @RoseNYC.com. We will never request payment, financial information, or sensitive personal documentation during the application process, and we will never extend a job offer without first conducting a formal in-person interview. If you receive a message that appears suspicious or does not originate from this domain, please mark it as spam or phishing and report it to us directly at . Overview Rose Associates is a recognized market leader in multifamily and mixed-use real estate. Based in New York City, we own, develop and operate leading properties in urban markets from Philadelphia to Boston and across all residential asset classes, including market, regulated, workforce and affordable housing. Our dynamic services platform spans development, construction, property and asset management, leasing, marketing and accounting/financial operations. We partner with private owners and institutional investors globally to develop and operate some of the most iconic assets in our markets. We rely on technology and the deep expertise of our team to consistently outperform the market in the operation of more than 30,000 units across some 250 properties in the most challenging housing markets in the country. For the past three years, Rose has been the top-rated manager for resident satisfaction in the United States on the Kingsley Surveys platform (peer group of firms with 10-30,000 units being surveyed). Established in 1925, Rose Associates possesses a century of real estate expertise and an impeccable reputation for excellence and integrity. Today a woman-owned business led by CEO Amy Rose, we are committed to a corporate culture of belonging and inclusion that is widely admired in the industry. As we expand across the Northeast, Rose is providing opportunity for our team members to grow their careers in an environment of respect and support. Join us on the forefront of innovation and growth – Rose Associates is where excitement meets opportunity! We are seeking a highly motivated and customer-focused Residential Property Handyperson to join our vibrant team and contribute to the overall maintenance, satisfaction and well-being of our residents. The ideal candidate will be proficient in a variety of repair and maintenance tasks, contributing to the overall well-being of the property and ensuring a safe and comfortable environment for residents. Essential Functions • Perform routine maintenance and repairs on residential units, including plumbing, electrical, HVAC, appliance repair, and carpentry tasks., • Address minor HVAC issues, Inspect, troubleshoot, and repair household appliances to ensure functionality and safety and collaborate with specialized technicians for major repairs. Coordinate with vendors for appliance replacements when necessary., • Paint and complete drywall repairs to maintain a fresh and appealing appearance throughout the property., • Repair and replace flooring materials as needed, ensuring a safe and aesthetically pleasing environment., • Perform routine maintenance on units in preparation of apartment turns, and maintain maintenance shop, including related inventory of supplies., • Conduct regular safety inspections, identifying and addressing potential hazards promptly., • Be available for on-call duties and respond to emergency maintenance requests outside regular working hours., • Comply with workplace safety and OSHA regulations., • Must be present on-site and be able to move throughout the building to address building related matters and meet with tenants, staff, vendors and visitors., • Ability to ascend and descend stairs, as well as positioning oneself in small spaces for building inspections and maintenance repairs and lifting and moving large or heavy objects in excess of 50 pounds., • High School diploma or equivalent and / or previous experience in a handyman capacity is preferred., • Knowledge of safety protocols, building codes and utilization of related machinery and tools is required., • Strong problem-solving skills and attention to detail., • Currently possesses EPA 608 Universal technical certification, S12, S13, S95, P99 or capable of obtaining the required certifications., • Proficient in computer operations, particularly skilled in using Microsoft Office and Yardi software. 8Lbw3W3t8M

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The incumbent is responsible for the maintenance and repair of buildings, wastewater treatment plant equipment and machines and machine tools. The incumbent will possess a working knowledge of electrical and control systems and have reached a high level of competency within a specific trade or discipline (e.g. welding, millwright, mechanics), but will have a functioning ability level in multiple areas. The incumbent will be responsible to guide and train less experienced personnel in areas of expertise. Primary Duties/Responsibilities: • Repair and maintain pumps, valves, motors and other process equipment., • Set up and proficiently operate machine tools to design, make and repair mechanisms and equipment, such as shafts, bushings, sleeves, gears, bearings and other related parts as assigned., • Fabricate parts and/or install, adjust, dismantle and reassemble machines and plant equipment., • Set up and proficiently operate various tools including, but not limited to: lathes, contour saws, cutoff saws, hand/bench/surface grinders, milling machines, spray welders, gas welders and various hand tools and precision measuring instruments., • Operate and use hoists, lifts, air hammers, masonry drills, grinders, welders and cutting equipment and other power and hand tools to safely accomplish assigned tasks., • Perform welding functions on buildings and equipment in the treatment plant including repair and fabrication work if permitted and authorized to do so.Study specifications such as blueprints, electrical schematics, line diagrams, sketches and/or descriptions of parts to be replaced, and plan sequence of operations., • Perform preventative and corrective maintenance of plant equipment as assigned., • Recommend replacement parts needed., • Maintain computerized work orders and records as directed., • Provide assistance and direction to less experienced mechanics and/or assigned helpers., • May provide support to other skilled trades employees., • Responsible for general housekeeping of maintenance shop, job sites, work areas and other areas as assigned including, but not limited to sweeping, dusting, mopping, cleaning and painting as necessary to maintain areas to Company standards., • Observes all on-the-job safety regulations., • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Two years of related education at a college, trade school or equivalent may be substituted for experience., • Knowledge of treatment plant machine equipment operations as well as proper procedures for maintenance and repair of such facilities., • Knowledge or/and ability to safely operate electrical test equipment, conduit bender, grinders, nibblers, angle iron cutter, hydraulic press, hoist and other hand or power tools equipment related to the job., • Must be familiar with all safety regulations and be prepared to work in and supervise confined space entry, and LOTO procedures., • Ability to understand the required functions of the Computerized Maintenance Management System (CMMS)., • Ability to cut with a cutting torch and an arc rod and ability to solder and weld., • Must hold and maintain a valid NYS driver’s license and ability to meet risk management guidelines., • Completion of recognized Apprenticeship program. Additional Information Pay Rate: $22.91 to $39.94 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Description Leidos Engineering has an opportunity for a Project Manager II who will work alongside lead engineers and account managers supporting substation engineering projects for various electric utility clients throughout the Northern United States. The PM will be part of an established team within our Power Delivery Solutions (PDS) division. PDS provides consulting services to public-owned and investor-owned electric utilities for comprehensive engineering design of electrical transmission, substation, and distribution projects nationwide. This position has remote working capabilities but candidates should be located in or adjacent to the Poughkeepsie, NY area to be available for client-related travel as needed. This location specificity allows Leidos to best serve the localized needs of our utility clients. Primary Responsibilities • Independently lead project teams to complete engineering design of various sized electric infrastructure projects for electric utilities, • Accept responsibility for overall project performance and reporting, • Manage project costs, schedule and scope within approved limits, including the development of recovery plans when needed, • Ensure contract compliance, • Drive work products by coordinating and working with Engineering Leads and Managers to track and execute client deliverables, • Ensure and document adherence to the quality control process, • Interface directly with the client and internal management to solve issues and report progress, costs, schedule adherence and risks across a program of projects, • Communicate with clients, internal project teams, multiple engineering disciplines, functional leaders, subcontractors, and support personnel, • Prepare bid documents; Develop cost estimates and responses to Requests for Proposal, • Complete monthly invoices, accruals, and accounts receivable within prescribed time frames, • Identify business development opportunities Required Qualifications: • Bachelor’s degree in Engineering, Business, Finance or a closely related discipline is required, • A minimum of five (5) + years of relevant Project Management experience, • Familiarity with the electric power industry and knowledge of business issues associated with power delivery services, • Demonstrated experience understanding, planning, managing and reporting project financial performance, budgets, proposals, scopes and schedules, • Must have the capability to plan, organize, direct, and track technical efforts on project tasks, • Ability to work effectively in a team environment, • Strong written and verbal communication skills, • Must be able to interact with customer representatives in an effective manner, • Excellent organizational and problem solving skills and the ability to prioritize tasks effectively, • Proficiency with project management software (e.g., MS Project, P6), • Strong MS Office skills (Word, PowerPoint, Excel), • Periodic travel may be expected (less than 5%); Candidates should possess a valid US driver's license Preferred Qualifications: • PMP Certification (or intention to obtain within the first year), • Direct experience with electric power infrastructure projects, • Demonstrated success with a team approach to the consulting business, • Advanced proficiency in Microsoft Excel, • Supervisory experience, • Practical experience leveraging AI for productivity, analysis, or automation At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. The opportunities at Leidos are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. Your greatest work is ahead! PDSPM PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 1, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Want to build a brighter, bolder future and cultivate your career? Join Ecolab’s team and help create a world in which we all thrive. Our Institutional team enhances customer success in sectors like hospitality, foodservice, long-term care, commercial, education, and government by focusing on satisfied guests, protected reputations, and efficient operations. Committed to building lasting relationships, we leverage our industry expertise and science-based guidance in cleanliness, food safety, and public health. Through our collaborative partnerships, we empower customers to elevate their service and ensure the highest safety standards. Ecolab is seeking a Field Service Technician to join our team in the Bronx, NYC market. We offer comprehensive chemical products and solutions to meet the needs of customers across the food service and hospitality industries. As a Service Representative, you will service a variety of restaurants, hotels, and long-term care facilities through heavy installations and maintenance on ware washing, laundry and dispensing systems to drive a positive guest experience and create cleaner, safer and healthier environments. How You’ll Make an Impact: * Install, repair, and perform maintenance on ware washing, laundry and dispensing equipment and systems * Service intensive support within assigned district, role is not aligned to a specific territory/route * Communicate Ecolab’s total value to the customer and strengthen the relationship * Manage equipment, parts, and inventory to control costs Position Details: This is a field-based position and may require travel to the following locations and surrounding areas: • Bronx, NYC, • Westchester, NY Work Schedule: Monday - Friday, 8:00 AM to 5:00 PM What’s Unique About This Role: * Access to best-in-class resources, tools, and technology * Thrive in a company that values a culture of safety to include top-notch safety training and personal protection equipment * Paid training program where you will learn from subject matter experts with proven success * Receive a company vehicle for business use * Gain Ecolab service ability (maintenance, troubleshooting and installations) and product and equipment knowledge by customer segment Minimum Qualifications: * High School Diploma or equivalent * 2 years of mechanical service-related experience * Position requires a current and valid Driver’s License with no restrictions * No Immigration Sponsorship available for this position * Availability to work overnight shifts and provide emergency call assistance which may occur at night, on weekends and over holidays Physical Requirements of Position: * Lifting 75 lbs * Pushing/pulling * Standing/bending/stooping * Working in confined spaces * Distinguishing color (tools may be accommodated) * Driving a company vehicle as required to perform job duties Ecolab is committed to providing reasonable accommodation to qualified individuals with a disability. Preferred Qualifications: * Associate’s degree or other advanced education or certifications * Previous mechanical problem-solving experience (e.g. plumbing, electrical, HVAC and/or mechanical experience) in industries related to food service, laundry, housekeeping, hospitality and/or pool and spa What’s in it For You: * Starting on Day 1: Access to our comprehensive benefits package including medical, dental, vision, matching 401K, company-paid pension, stock purchase plan, paid parental leave, select discounted childcare resources, and more! * The opportunity to take on some of the world’s most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments. * The ability to make an impact and shape your career with a company that is passionate about growth. * The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best. About Ecolab: At Ecolab, we prioritize our talent-first philosophy by creating the most capable and diverse team to excel at our nearly three million customer sites. Building on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. Our solutions not only enhance operational efficiency but also contribute to sustainability and public health, making a positive impact on the world. We are committed to eliminating unnecessary complexities and embracing a beginner's mindset, continuously seeking new perspectives and innovative solutions to stay ahead in a rapidly changing world. Annual or Hourly Compensation Range The pay range for this position is $62,500-$93,800. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. ___ to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing., • Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Job Description ___ Heavy Equipment Technician (Shop) Posting Start Date: 10/15/25 Job Location (Short): Holbrook, New York, USA, 11741 | Baltimore, Maryland, USA, 21227 | Harrisburg, Pennsylvania, USA, 17112 | Hatfield, Pennsylvania, USA, 19440 | Laurel, Delaware, USA, 19956 | South Plainfield, New Jersey, USA, 7080 | Pleasant Gap, Pennsylvania, USA, 16823 | Wilkes Barre, Pennsylvania, USA, 18702 | Winslow Township, New Jersey, USA, 8095 | Yonkers, New York, USA, 10701 Requisition ID: 32329 Onsite or Remote: Onsite Position Join Komatsuand Be Part of Something Big Schedule: First Shift, Monday through Friday Company Overview: At Komatsu, we lead the construction and heavy equipment industry with cutting-edge technology and innovative solutions that enhance efficiency, safety, and sustainability. Komatsu Company-Owned Dealers East operates eleven Company-Owned branch locations in the NJ, NY, PA, MD, and DE region. If you are a recent graduate of a Technical School or an experienced industry Technician, we would like to talk to you about a career with Komatsu. If you have experience maintaining and repairing construction equipment, cranes, diesel engines, on-highway truck and bus, marine and industrial equipment we would like to talk to you about transitioning your knowledge and experience through extensive training to work on Komatsu and the allied OEM products we represent. To learn more about___, visit our website! If you would like to hear what our employees think about working for Komatsu, click this link___. Why Join the Komatsu Company-Owned DealerEast Team : • Competitive Compensation, • Medical, Dental, Vision, Life & Disability Benefits, • Career Planning and Advancement, • Tool allowance to ensure you have the best equipment for the job, • Training Opportunities, • ....and working for an OEM owned dealership! We currently have exciting opportunities for all levels of Service Technicians, from Mechanic Helpers to Senior Field and Service Technicians at any of our eleven locations! Successful candidates prior experience in the heavy equipment repair industry, including but not limited to:, • Diagnostic and repair experience with heavy equipment (construction, mining, material handling, paving, milling, etc.), • Ability to participate in major repair, rebuild, or replace engines and other major components, • Knowledge of diesel engines and hydraulic, pneumatic, electrical, electronic, etc. systems, • Strong computer skills including Microsoft products as well as industry software, • Ability to read and write the English language, • Maintain a positive and professional working relationship with peers, management, and support resources, with a constant commitment to teamwork and exemplary customer support., • Proactively seek and participate in available company-sponsored training and meetings to develop and advance knowledge base and skill set., • Ability to convey repair details in clear and accurate service notes for assigned work orders, • Operation of heavy equipment, • Other duties as assigned As a helper, mechanic or technician with Komatsu Company-Owned Dealer East, the physically demanding work is performed in industrial environments and includes exposure to significant environmental conditions, including but not limited to:, • Sitting, standing, climbing, walking, lifting, pulling and/or pushing, • Working at heights, • Carrying, grasping, reaching, stooping, bending, and crouching, • Must be able to lift/carry 50 pounds, • Hand/eye and motor coordination, • Work overtime as needed Komatsu is an Equal Opportunity Workplace and an Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Position Summary: The Cloud Solutions Architect owns the cloud platform for the WAC Group’s new smart products. The ideal candidate will architect the cloud backend from the ground up, drive technical decisions across teams, and serve as the technical point of contact for customers and partners. The individual in this role will also support the existing residential cloud platform as needed. This role requires strong hands-on expertise across the full product lifecycle developing smart connected products for commercial and residential markets. Key Responsibilities: • Partner with firmware, mobile, application, and solutions teams to define system architecture, integration patterns, and technology selections that align with product and business objectives., • Evaluate, recommend, and standardize cloud services, frameworks, and architectural patterns to meet performance, scalability, reliability, and cost targets., • Implement best practices for CI/CD, infrastructure-as-code, code governance, and release management to ensure reliable and repeatable cloud deployments., • Design and maintain monitoring, logging, tracing, and alerting systems to proactively manage cloud and device performance, uptime, and reliability., • End-to-End Ownership: Own full accountability for the cloud platform’s architecture, reliability, security, and performance—proactively identify risk and drive resolution., • Cross-Functional Leadership: Align firmware, application, DevOps, and product teams around cohesive architectural decisions that serve both technical and business objectives., • Customer-Centered Execution: Communicate complex technical concepts clearly, build trust with customers and partners, and deliver solutions that meet real-world performance., • Technical Excellence & Rigor: Set and enforce high standards for scalability, observability, security, and operational discipline., • Bachelor’s degree in Computer Science, Electrical Engineering, or a closely related area of study., • 8-10 years of software development experience, including 5+ years architecting and operating production cloud systems (AWS strongly preferred)., • Deep knowledge of IoT communication patterns and protocols (MQTT, HTTP, WebSocket), device shadow/state management, and secure edge-to-cloud integration., • Proven experience designing and operating scalable, production-grade serverless and microservices architectures., • Experience defining SLAs/SLOs, implementing monitoring frameworks, and leading disaster recovery and business continuity planning., • Proven strength in understanding distributed systems, event-driven architectures, and modern software design principles. (SOLID, Clean Architecture)., • Strong proficiency in Python and JavaScript/Node.js and TypeScript; working knowledge of additional languages (Go or C++ is a plus)., • Experience designing and optimizing SQL and NoSQL data models (DynamoDB, Aurora/RDS preferred)., • Mandarin language proficiency (verbal and written) is a plus. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all of its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities.

Job Description TITLE: Inside Distributor Sales Representative DEPARTMENT: SALES REPORTS TO: SR. CORPORATE ACCOUNT MANAGER, SR. ACCOUNT MANAGER FLSA STATUS: NON-EXEMPT/EXEMPT JOB DESCRIPTION REVISION: 1/24/24 BASIC FUNCTIONS As an Inside Distributor Sales Representative at Blue Raven Solutions, you play at pivotal role in ensuring our customers receive exceptional service and support. This entry-level position is designed for individuals with a passion for sales, excellent communication skills, and a positive attitude. Your primary responsibilities include quoting prices for in-stock items, managing a designated customer base, responding to heavy email and phone inquiries, and processing sales orders with precision. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Support the creation/building of long-term relationship with customers., • Performs order entry, reviews and processes orders, and create credit requests., • Create processes and maintain a variety of reports pertaining to specific clients., • Provide timely and accurate quotes for in-stock items., • Respond promptly to heavy email and phone activity, demonstrating a positive, friendly, and helpful attitude in all customer interactions., • Manage a defined customer base, establishing and maintaining strong relationships by proactively addressing customer needs and providing tailored solutions., • Efficiently process sales orders, ensuring accuracy and timely delivery while collaborating with various teams., • Interfaces with clients, account managers and internal departments to assist in resolving client-related administrative issues., • Identifies delays or problem areas, and suggests solutions for resolving issues., • Gather competitive information, and provide feedback on customer satisfaction, as well as recommendations to improve procedures., • Provide essential administrative support to the sales team., • Maintain customer database., • Help track individual customer quality and delivery ratings., • Comply with all customer quality requirements., • Support a safe work environment, using safety equipment, ensure safety equipment used in the areas is proper, safe, and used in a productive manner., • Follow established departmental policies, procedures, objectives, and safety standards., • Perform other related duties and personnel backups as assigned and contributes to team effort. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Pending EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma – College education preferred., • Strong Microsoft Outlook skills, • Strong attention to detail., • Strong follow-up and closing skills to drive sales opportunities to completion., • Customer empathy/ Superior customer service skills., • Highly organized. TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job DescriptionAre you ready to be apart of changing the game for pharmacy automation with next generation solutions? Come join us! Who We Are: ARxIUM is a leader in the development of advanced pharmacy technology and solutions. Here you have the opportunity to work with the best experts in the pharmacy health systems sector paving the way with innovative automation hardware and software technologies. ARxIUM has been providing innovative solutions in the pharmacy automation space for over twenty years and currently serves customers in North America, Europe and Asia. We have offices in Winnipeg and the Chicago Area and work remotely in cities across North America and Europe. ARxIUM is proud to offer the successful candidate • Competitive salary, • Medical/RX/Dental/Vision benefits, • Healthcare and dependent care FSAs, • Company paid Life/ADD insurance, • Company paid STD plans, • Company paid EAP plan, • Opportunity to participate in the company 401k plan with employer match Please note that this position involves travel requirementsWho We're Looking For: • Diploma or degree in a technical field including, but not limited to: mechanical, electrical, computer, biomedical., • 3 - 5 years experience programming Allen-Bradley PLCs., • Conveyor and Automation experience., • Engineering and Electrical experience., • 7+ years of direct field service (or equivalent) experience troubleshooting and repairing computerized electro-mechanical systems., • 7+ years of experience working in a service capacity with direct customer interaction.What You'll Be doing:, • Perform software and hardware preventive and corrective maintenance., • Perform software and hardware emergency break fix service calls., • Refines and validates PLC Coding., • Works with the facility to schedule appropriate downtime for preventive and corrective maintenance., • Responsible for timely and accurate completion of all paperwork and reports. This includes ticket updates and closures, expenses, timesheets and other administrative requirements., • Responsible for following up on open issues, tickets and escalations., • Working Outside normal business hours may required to service products., • Performs other duties as required. Take a look at your potential career with ARxIUM and apply today. WE would love to meet you! Powered by JazzHR bwrOSlqGzr

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job DescriptionGreetings from Donato Technologies Inc. We have an immediate opening with my client. If you are looking for a new project, please send me a copy of your updated resumes Electrical Testing TechnicianLocation: Nassau County, NY (Remote with fieldwork as required) Employment Type: Full-Time About the Role We are seeking a highly skilled NETA III Electrical Testing Technician to join a leading electrical testing and maintenance services provider. The ideal candidate will have extensive hands-on experience with high, medium, and low-voltage systems, ensuring the safe and reliable performance of electrical equipment across a variety of client sites. This role is best suited for professionals who excel in technical diagnostics, field testing, and team leadership, while adhering to industry standards and safety protocols. Key Responsibilities • Electrical Testing & Diagnostics, • Perform advanced testing on electrical equipment including circuit breakers, transformers, switchgear, motors, PTs, CTs, and cables., • Utilize specialized testing equipment such as Doble power factor test sets, low resistance ohmmeters, VLF test sets, insulation resistance testers, CT ratio/saturation devices, DC hi-pot testers, TTR instruments, and primary/secondary injection tools., • Troubleshooting & Repairs, • Identify, analyze, and resolve electrical issues using schematics, manuals, wiring diagrams, and engineering input., • Recommend and oversee repairs or replacements to ensure optimal system performance., • Maintenance & Compliance, • Inspect, clean, and maintain electrical equipment in compliance with industry and NETA standards., • Conduct risk assessments and enforce OSHA and company safety protocols., • Project Management & Leadership, • Oversee field service projects, ensuring on-time and within-scope delivery., • Mentor junior technicians and support their technical growth., • Collaborate with engineers, project managers, and clients to align project execution with client needs., • Documentation & Reporting, • Maintain accurate records of test results, inspections, and service activities., • Prepare detailed reports to ensure client transparency and compliance. Qualifications • Associates or Bachelors degree in Electrical Engineering, Electrical Technology, or related field (or equivalent military/field experience)., • NETA Level III Certification (required); NETA Level IV preferred., • 57+ years of electrical testing and maintenance experience (480V750kV)., • Strong knowledge of switchgear, transformers, motors, PTs, CTs, and protective relays., • Proficiency in interpreting electrical drawings, schematics, and wiring diagrams., • Proven leadership skills with ability to mentor junior staff., • Excellent communication and report-writing skills., • Physical ability to climb ladders, work in field conditions, stand for long periods, and lift up to 70 lbs., • Valid drivers license with clean record., • Ability to pass pre-employment drug screen, background check, and physical/respiratory fit test., • Flexibility to work overtime when required. Compensation & Benefits • Competitive salary based on experience., • Medical and dental insurance., • 401(k) retirement plan., • Paid vacation, sick leave, and holidays., • Participation in Employee Stock Ownership Plan (ESOP)., • Career development, training, and growth opportunities. Pre-Employment Screening All candidates must pass a background check, drug screen, and may be required to complete a physical/respiratory fit test prior to employment. Jennifer Sampson Technical Recruiter ....................................................... DONATO TECHNOLOGIES, INC 12100 Ford Rd, #306, Dallas, TX 75234 Direct : (469)-342-0401 Email: Web:

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description At Versant Media, we believe in the talent of our people. It’s our passion and commitment to excellence that drives Versant’s vast portfolio of brands to succeed. From broadcast and cable networks, news and sports platforms, to film, world-renowned theme parks and a diverse suite of digital properties, we take pride in all that we do and all that we represent. It’s what makes us uniquely Versant. Here you can create the extraordinary. Join us. Versant Media is seeking a dedicated Production Support Engineer to join our dynamic Production Media Engineering group. The ideal candidate will be responsible for ensuring seamless on-air productions by supporting all production systems at Versant Media Locations in Englewood Cliffs, NJ and New York, NY. This also includes our Remote Production sites in Washington DC and West Coast locations in LA and San Francisco. You will be troubleshooting, diagnosing, and solving any technical issues that arise during live broadcasts and production control rooms, studios, distribution/automation, master control, and related equipment for all Versant Properties. This role is pivotal to Versant Media’s commitment to deliver high-quality news, sports, and entertainment 24/7. You will be maintaining the integrity of cutting-edge broadcasting technology and collaborating with Engineering and Operations to optimize broadcast workflows in a fast-paced environment. Qualifications The ideal candidate will have knowledge and experience in the following areas: • Strong understanding of digital & signal workflows., • Up to date with industry trends and emerging technologies., • Ability to work alone as a lead and as part of a team., • 5+ years of recent experience supporting live, television production environments. PREFERRED QUALIFICATIONS: • Knowledge of SMPTE 2110 standards., • Knowledge and experience with VizRT, Ross, and Chyron., • Experience with Transmission, Fiber, and Encode/Decode Distribution and Transport Systems., • Experience with Cloud and VM Based applications and planforms., • Ability to read and interpret AutoCAD drawings., • Proficiency with AUTOCAD, MS Office Suite, Windows, Linux, Mac OS., • Experience with JIRA, Confluence and other project and ticketing systems., • Technical enthusiasm and an eagerness to never top learning. Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to . VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description At Versant Media, we believe in the talent of our people. It’s our passion and commitment to excellence that drives Versant’s vast portfolio of brands to succeed. From broadcast and cable networks, news and sports platforms, to film, world-renowned theme parks and a diverse suite of digital properties, we take pride in all that we do and all that we represent. It’s what makes us uniquely Versant. Here you can create the extraordinary. Join us. Versant Media is seeking a dedicated Production Support Engineer to join our dynamic Production Media Engineering group. The ideal candidate will be responsible for ensuring seamless on-air productions by supporting all production systems at Versant Media Locations in Englewood Cliffs, NJ and New York, NY. This also includes our Remote Production sites in Washington DC and West Coast locations in LA and San Francisco. You will be troubleshooting, diagnosing, and solving any technical issues that arise during live broadcasts and production control rooms, studios, distribution/automation, master control, and related equipment for all Versant Properties. This role is pivotal to Versant Media’s commitment to deliver high-quality news, sports, and entertainment 24/7. You will be maintaining the integrity of cutting-edge broadcasting technology and collaborating with Engineering and Operations to optimize broadcast workflows in a fast-paced environment. Qualifications The ideal candidate will have knowledge and experience in the following areas: • Strong understanding of digital & signal workflows., • Up to date with industry trends and emerging technologies., • Ability to work alone as a lead and as part of a team., • 2+ years of recent experience supporting live, television production environments. PREFERRED QUALIFICATIONS: • Knowledge of SMPTE 2110 standards., • Knowledge and experience with VizRT, Ross, and Chyron., • Experience with Transmission, Fiber, and Encode/Decode Distribution and Transport Systems., • Experience with Cloud and VM Based applications and planforms., • Ability to read and interpret AutoCAD drawings., • Proficiency with AUTOCAD, MS Office Suite, Windows, Linux, Mac OS., • Experience with JIRA, Confluence and other project and ticketing systems., • Technical enthusiasm and an eagerness to never top learning. Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to . VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job Description Fire Protection and Plumbing Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionLitigation Paralegal Scarsdale, NY · On-site · Full-time $60K–$80K/yr · Easy Apply We’re seeking a motivated Litigation Paralegal to join a busy, collaborative law team in Scarsdale, NY, an attractive and convenient location with a vibrant community and excellent amenities. About the Role As a Litigation Paralegal, you will support multiple senior attorneys by preparing, filing, and coordinating legal documents, managing busy calendars, maintaining case files, and assisting with depositions and court proceedings. This role combines hands-on legal work with administrative responsibilities in a fast-paced but collegial environment. Key Responsibilities: * Serve as primary paralegal for multiple senior litigation attorneys and handle all paralegal work on their cases. * Finalize, format, file, and serve legal documents; prepare tables of contents and authorities. * E-file in federal and state courts, prepare courtesy copies, and assist with ADR proceedings. * Arrange depositions and assist with preparation, including exhibits and binders. * Maintain attorney calendars, deadlines, and case files—both physical and electronic. * Prepare simple legal documents using firm templates (subpoenas, discovery demands, court forms). * Assist with document productions, Bates stamping, and conflict checks. * Answer firm phones and manage incoming mail as needed. Requirements: * 1–2 years of paralegal or legal assistant experience. * Advanced MS Word skills. * Experience e-filing in NY/NJ state and federal courts; PA courts a plus. * Familiarity with law firm CRM/document management/time entry systems (NetDocs and Finance Core a plus). * Proficiency with Westlaw research and cite-checking. * Superior organizational skills, attention to detail, and ability to multitask. * Positive, team-oriented attitude and willingness to work overtime as needed. Why You’ll Love Working Here: * Fast-paced but supportive and collegial environment. * Opportunity to grow professionally with senior attorneys. * Convenient location that is beautiful, walkable, with excellent schools, dining, and commuting options. An Equal Opportunity Employer committed to diversity in the workplace. We celebrate the unique contributions that each team member brings to our organization. Please reach out for additional info. I have over 100+ roles open daily! Please add me on Linked in. ---No Third Parties--- Michael Sardella| Liberty Personnel Services, Inc. 1001 Conshohocken State Rd, Ste 2-410| West Conshohocken, PA 19428 #newyork #junior #litigation #paralegal Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job DescriptionSenior Electrical Engineer - Critical Facilities - White Plains, NY (hybrid /remote) Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description BASIC FUNCTIONS The Training/Project Coordinator is a dual-role position responsible for overseeing employee training programs and managing key internal projects to support organizational growth and operational efficiency. This role will plan, implement, and track both training initiatives and project execution across departments, ensuring alignment with company goals, timelines, and budgets. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Design, schedule, and coordinate internal and external training programs., • Track training completion, maintain accurate records, and ensure compliance with company and regulatory standards., • Work with department heads to assess training needs and develop target learning plans., • Prepare training materials, manuals, and onboarding guides as needed., • Evaluate training effectiveness and recommend improvements., • Lead cross-functional projects from initiation through completion, ensuring scope, timeline, and budget alignment., • Develop project plans, assign tasks, track milestones, and provide regular updates to stakeholders., • Identify and manage project risks, issues, and changes to scope., • Facilitate effective communication between departments to ensure smooth project execution., • Prepare status reports and post-project evaluations. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES (pending) EDUCATION / EXPERIENCE / COMPETENCY • Bachelor’s degree in Business, Human Resources, Organizational Development or related field., • 3+ years of experience in training coordination, project management, or a similar role., • Proficient in project management and learning management systems., • Project Management certification is a plus., • Excellent verbal and written communication skills., • Excellent organizational skills and attention to detail., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift 15 pounds at times. TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job DescriptionAre you ready to be apart of changing the game for pharmacy automation with next generation solutions? Come join us! Who We Are: ARxIUM is a leader in the development of advanced pharmacy technology and solutions. Here you have the opportunity to work with the best experts in the pharmacy health systems sector paving the way with innovative automation hardware and software technologies. ARxIUM has been providing innovative solutions in the pharmacy automation space for over twenty years and currently serves customers in North America, Europe and Asia. We have offices in Winnipeg and the Chicago Area and work remotely in cities across North America and Europe. ARxIUM is proud to offer the successful candidate • Competitive salary, • Medical/RX/Dental/Vision benefits, • Healthcare and dependent care FSAs, • Company paid Life/ADD insurance, • Company paid STD plans, • Company paid EAP plan, • Opportunity to participate in the company 401k plan with employer match Please note that this position involves travel requirementsWho We're Looking For: • Diploma or degree in a technical field including, but not limited to: mechanical, electrical, computer, biomedical., • 3 - 5 years experience programming Allen-Bradley PLCs., • Conveyor and Automation experience., • Engineering and Electrical experience., • 7+ years of direct field service (or equivalent) experience troubleshooting and repairing computerized electro-mechanical systems., • 7+ years of experience working in a service capacity with direct customer interaction.What You'll Be doing:, • Perform software and hardware preventive and corrective maintenance., • Perform software and hardware emergency break fix service calls., • Refines and validates PLC Coding., • Works with the facility to schedule appropriate downtime for preventive and corrective maintenance., • Responsible for timely and accurate completion of all paperwork and reports. This includes ticket updates and closures, expenses, timesheets and other administrative requirements., • Responsible for following up on open issues, tickets and escalations., • Working Outside normal business hours may required to service products., • Performs other duties as required. Take a look at your potential career with ARxIUM and apply today. WE would love to meet you! Powered by JazzHR IybKD0oFAV

Job Description HVAC Controls Engineer - White Plains, NY Our client is a Leading Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5-10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Please note; this role is based in Mount Vernon! Job Summary Miller Proctor Nickolas (MPN) is a premier leader in the industrial boiler market. We are seeking a high-caliber Technical Sales Engineer to drive our Aftermarket Parts and Service division. This is not a "catalog sales" role; it is a complex, solutions-based position requiring a BS in Engineering and the ability to design sophisticated service solutions that go beyond the client’s initial request. You will act as the technical bridge between our field technicians and our clients, turning on-site challenges into comprehensive service upgrades and repair contracts. If you are a self-starter who thrives on technical problem-solving, value-based selling, and managing high-stakes industrial accounts, you belong at MPN. Key Responsibilities • Technical Solution Design: Evaluate field service opportunities and design complex mechanical/electrical service solutions. You must be able to read mechanical drawings and wiring diagrams to quote accurate repairs and upgrades., • Rapid Response Quoting: Support our field technicians and boiler cleaning teams by providing rapid, manufacturer-authorized quotes while they are on-site., • Value-Based Selling: Navigate long-term sales cycles by focusing on the "Total Cost of Ownership," ensuring clients understand the value of a premium MPN solution., • Account & Contract Management: Prospect new clients and manage existing accounts, including the negotiation of complex service contracts and maintenance agreements., • Full-Cycle Ownership: From receiving the lead to placing the PO with suppliers and coordinating with the Service Scheduling team, you own the project’s administrative and financial integrity., • Project Handoff: Identify and forward new boiler sales opportunities to the capital equipment team while coordinating larger projects with internal Project Management. Qualifications • Education: BS Degree in Engineering or Engineering Technology is required., • Experience: Minimum of 2 years in industrial technical sales. Prior experience with boiler systems or aftermarket industrial products is highly preferred., • Technical Literacy: Proven ability to interpret mechanical drawings, electrical wiring, and technical specifications., • Systems Proficiency: Strong experience with CRM platforms (HubSpot preferred) and MS Office (Excel/Word)., • Financial Acumen: Experience in industrial estimating, billing, and protecting profit margins, • Soft Skills: Customer-centric problem solver, excellent time-management, and the ability to work independently with no handholding. Why Join Miller Proctor Nickolas? • Reputation: Represent a manufacture’s authorized leader in the boiler industry., • Autonomy: Manage your own territory and accounts with the backing of a world-class field service team., • Compensation: Competitive base salary plus a commission structure designed for high-achievers., • Stability: Work in a critical industrial sector with a company known for excellence since 1957.Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description Are you passionate about project management and dedicated to continually delivering excellence? If so, we have an exciting opportunity for you to join our team as a Project Manager. We’re seeking a Project Manager who thrives in a dynamic environment, can drive multiple complex projects to completion, and lead with accountability and precision. This is a local, on-site role based out of our Port Washington office, with some travel to federal project sites as required. VIRSIG heroically provides global technology integrations, construction solutions, and professional services worldwide. We service federal, state and local government agencies and commercial entities who believe what we believe. We are committed to protecting America’s warfighters, first responders, and installations against all threats, foreign and domestic. As a Project Manager, you will play a pivotal role in leading and managing Electronic Security Systems (ESS) projects from inception to completion, ensuring that they are delivered on time, within budget, and to the highest quality standards. You will work closely with our clients, project teams, and subcontractors to coordinate project activities, mitigate risks, and achieve project objectives while maintaining strict adherence to contractual requirements, company standards, and government regulations. This is a unique opportunity to be part of a dynamic team that is shaping the future of security technology and making a meaningful impact on national security. If you are a motivated, results-driven professional with a strong background in project management and a passion for serving those who serve, we invite you to join us. Job Details Responsibilities • Manage, oversee and coordinate all field activities for various types of projects, including large and complex or multi-phased projects, from deployment through completion and sign-off, • Maintain accurate and up to date records of job status, job changes, material flow and other control records necessary for processing of internal and external reports or approvals, • Proactively identify and communicate potential project risks and collaborate to develop/implement strategies to minimize impact and control deviations from estimated costs and project deadlines, • Proactively communicate project status, schedules, change proposals, change orders and related project activities on a regular basis with Operations Team and customer as directed, • Coordinate the procurement of materials, supplies, services, and controls necessary for timely and cost-effective completion of project within budget, • Ensure project milestones are achieved; identify risks and develop mitigation strategies; adjust or correct project plan and/or project cost estimates as necessary to meet schedule and financial goals, • Understand and manage the scope of work and terms and conditions in customer contracts, including cost control, delivery fulfillment, quality of service and other customer requirements, • Bachelor’s degree in management, engineering, or related field or equivalent experience, • Minimum of five years of project supervisory experience required, • Minimum of eight years of previous relevant installations, field service, project management or engineering experience with US government contracts or operations preferred; at least 5 years managing projects focused on installation, integration, or maintenance of electronic security system, • Experience in one or more of the following industries preferred: Construction, logistics, low-voltage or wireless communications, electrical, fire alarm & life safety, and/or building automation, • Project Management Professional (PMP) certification a plus; project-specific industry certifications and/or licenses required, • OSHA 30 preferred, • Expert organizational and project management skills including cost control and financial analysis, • Technical aptitude in subject matter area a huge plus (construction, electronic security/fire alarm systems, network/IT, wireless or other communications systems), • Leadership, mentoring, and staff development skills - Act as a role model and leader for assigned teams and ensure all team members are treated fairly and provided growth opportunities, • Adaptability to respond effectively to changes in situation or information; ability to influence others and build consensus using written and verbal communication skills, • Ability to build collaborative work environment for customer, stakeholders, and team members, • Proficiency in Microsoft Outlook, Project, Excel, Word, and PowerPoint; familiarity with schedule/Gantt chart review and analysis, • Ability to walk up to a mile without physical distress and climb stairs, • Frequent prolonged periods of standing, bending, pulling, twisting, reaching, and climbing, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus, • Occasionally, the colleague may be required to climb and work in high places, stoop, bend, or reach above the shoulders, • Frequently required to sit, stand, walk, talk, or hear; use hands to handle or touch objects or controls, • Must be able to lift, push, or pull up to 25 pounds and occasionally lift, push, or pull up to 50 pounds Work Environment, • This is an office-based position which requires regular work-related travel and visits to work sites in the field; site conditions will vary, • While performing the duties of this position, the employee may be exposed to weather conditions from above 100oF to below 0oF and exposed to various climates and conditions, • May require work in confined spaces, • Risk of electrical shock and/or radiation may be present At VIRSIG, we believe that service to others can change the world. We believe that those who serve with strong morals and character can inspire others to do the same and overcome obstacles and challenges that many may see as insurmountable. We believe that it is our duty to defend, protect, and serve those that uphold our nation’s values. If you’re driven and looking for a place to grow, come join us. VIRSIG’s Core Values • People Matter, • Do the Right Thing, • Endless Pursuit of Excellence, • Long-term vs Short-term Focus, • Be Heroic!, • Never Give Up VIRSIG offers eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, professional development assistance, as well as participation in a 401(k) plan with company match. Salary will be commensurate with experience. VIRSIG is proud to be an equal employment workplace. Individuals seeking employment at VIRSIG are considered without regards to age, ancestry, color, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, race, religion (including beliefs and practices or the absence thereof), sexual orientation, military or veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR jncC0R3QwB

Job DescriptionAt Rye Subaru, we strive to conduct our business as a well-respected organization; with integrity, hard work, and with the highest care for our people, customers, and business partners. Every employee at Rye Subaru is absolutely critical to our success. We promise to keep delivering the same award-winning service and value that our community has come to expect from our dealership group throughout the years. Benefits • Hourly rates up to $38 per hour for those that qualify, • 401(k) Match, • Open at 7:30 am - 5:00 pm Monday - Friday, • Alternating Saturdays from 8:00 am - 3:00 pm, • Paid Vacation, • Closed on Major Holidays - Thanksgiving Day, Christmas Eve, Christmas Day, New Year's Eve, New Year's Day, 4th of July, Memorial Day, Labor Day, • Closed SundaysResponsibilities, • Perform work specified on the repair order with efficiency per dealership guidelines, • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment., • Diagnose, maintain, and repair vehicle automotive systems, including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs, • Execute repairs under warranty to manufacturer specificationsQualifications, • 2+ years of Service Technician experience preferred, • High school diploma or equivalent, ASE Certification a plus, • B - level qualifications, including Diagnostic, Electrical, and Engine Repair, • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment, • Basic computer competencies - knowledge of CDK a plus, • Positive, friendly attitude, along with an eagerness to improve, • Enjoy working in a dynamic environment, • Teammate with the ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Valid driver's license and clean driving recordWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. * Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. * Demonstrating a willingness to help others and be a team member * Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. * Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. * Provide voice of Customer feedback. * Through service and Customer relationships, build brand dedication. * Conduct travel and work in a safe manner, constantly learning new technology and soft skills. * Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. * Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: * Proficient verbal and written communication and Customer relation skills. * Able to interact and effectively communicate in person and over the phone with customer and co-workers. * Present a professional image. * Must be adaptable to changes and able to deal with change, delays, or general work-related issues. * Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. * Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). * Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. * Basic mechanical and logical solving skills are a must. * Rational decision making and problem-solving skills. Work Environment * Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: * Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: * We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution Tuition reimbursement * Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: * Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. * Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. * Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. * Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1437B - White Plains, NY

Job Description Senior Engineering Lab Technician Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers many the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits include employer-funded health care, on-site lunch program, 401K contribution with employer matching, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: Monday through Friday This is an on-site role based in our White Plains, NY office. Office hours: 8:00 am to 4: 45 p.m. Salary Range: $65,000 to $85,000 per year; commensurate with experience Duties/Responsibilities: • Construct test sets and cable assemblies from schematics and assembly drawings, utilizing both hole and SMT technology., • Maintain a clean, organized lab environment that provides a shared resource to lab technicians and engineers., • Conduct routine calibration of electronic instruments, ensuring accuracy and reliability., • Coordinate external calibration for equipment that cannot be calibrated in-house., • Collaborate with the engineering team to troubleshoot and resolve equipment issues promptly., • Read, implement, and provide feedback on electrical and mechanical drawings., • Demonstrate proficiency with electrical lab tools to construct and assemble surface mount and through-hole technologies, aircraft harnesses, and test equipment., • Demonstrate proficiency with machine shop tools such as drill presses and mills., • Provide technical guidance and mentorship to lab technicians and engineers., • Ensure compliance with ISO or AS9100 standards within the lab., • Maintain accurate and up-to-date documentation for all lab equipment and activities., • Associate degree in electronics, avionics, or a related field with a solid understanding of electronic circuit theory., • Proficient in reading and editing schematics and mechanical drawings., • Strong computer skills with a willingness to learn and adapt to new tools. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #hc229034

Job Description TITLE: QUALITY ADMINISTRATOR DEPARTMENT: COMPLIANCE REPORTS TO: QUALITY COMPLIANCE MANAGER FLSA STATUS: NON-EXEMPT JOB DESCRIPTION REVISION: 09/04/24 BASIC FUNCTIONS The Quality Administrator will provide support to the Quality Compliance team in maintaining a strong overall Quality Compliance Program including the Quality Management System and Supply Chain. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES GENERAL: • Produce detailed Excel, Word, and PowerPoint reports/presentations as needed by Department Leads., • Preparation of Quality Management Reviews, acquiring accurate data necessary to communicate the Quality Management System., • Evaluating QMR data and reporting back findings including but not limited to: trends, areas of concern, etc. to Department Leads., • Update management on open items related to projects., • Coordinate schedules, activities, meeting minutes and follow-up action items., • Provide support to External Provider Qualification program; identify risks and opportunities for improvement., • Provide support for updating all vendor files in EPDS as per approved Vendor Forms., • Assist Compliance team with functions related to document control., • Lead and/or conduct internal audits throughout the organization as directed by the Audit Program Manager in accordance with ISO19011, • Assist personnel with on-the-spot audits and process walk through as requested., • Member of the "Surveys Team", thus responsible for completion of Incoming Self-Assessments as directed by the Director of Contracts., • Training of personnel when requested by Management on any responsible processes., • Act as a backup administrator to the Compliance Regulatory Platform., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules and policies., • Update maintain and grow tracker with any applicable incidents as directed, • May be assigned additional responsibilities as directed by the Quality Compliance Manager QMS TRAINING ADMINISTRATOR: • Input training requirements provided by the Management Representative for all QMS applicable job titles, • Ensure newly onboarded employees are meeting training requirements within the 90-day probationary period, • Ensure training of revised documents are completed within the two-week CTG requirement. Follow up with department heads as needed to ensure trainings are conducted, • Send Weekly Delinquent Training Report to department heads as applicable., • Follow up with department heads regularly to ensure trainings are conducted and training records are closed, • Upload and maintain employee certifications within the Compliance Regulatory Platform, • Monitor employee certification expiration dates and notify department heads accordingly, • Ensure operational employees’ vision exams are up-to-date and notify department heads accordingly STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001, ISO17025 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA- QMS-9090, ASA-100 and supporting construct standards AS6081, AS6171, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Weekly recertification rate to meet annual requirements for External Providers (as needed with Supply Chain designee), • Re-Certification rate average turn time., • Procurement (Sales) Weekly completion rates, • Sub-Tier assessments submitted for completion + return rates., • New Sub-Tiers added monthly., • Closures of all said projects within CTG’s Compliance Project Management tool, • Customer Surveys received and documented monthly EDUCATION / EXPERIENCE / COMPENTENCY • Bachelor’s degree, preferred., • 1-3 years of administrative experience., • Proficiency in MS Office with expertise in Microsoft Word, PowerPoint, Excel and Project Management Tools., • Detail oriented and comfortable working in a fast-paced office environment, • Exceptional communication skills. ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job Description Now Hiring - Start Immediately! First Student is hiring immediately for a Mechanic / Maintenance Technician II to join our team dedicated to safely transporting students in those iconic yellow buses. In this role, you'll play a critical part in keeping our fleet road-ready and dependable-supporting a safer ride for the children in our community. Why Join First Student? In addition to a supportive, safety-first culture and stable full-time work, we proudly offer: • Pay: $25.00/ hr, • Full benefits package, including health, dental, vision, and 401(k) with company match, • Paid time off including holidays and vacation, • Annual tool & gear allowances - boots and prescription safety glasses, • Ongoing, state-of-the-art training programs to support your career growth As a Technician at First Student, your day-to-day work ensures our vehicles are maintained and safe for our passengers. You'll complete both routine and advanced repairs, handle emergency service calls, and work under moderate supervision. You may also provide mentorship to entry-level technicians. Key Responsibilities: • Perform maintenance and repairs on vehicles including:, • Brakes, suspensions, drivetrains, and transmissions, • Electrical components, fluid systems, filters, belts, batteries, and hoses, • Conduct preventive maintenance (PMs), DOT inspections, and diagnostic troubleshooting, • Maintain detailed service records, complete accurate work orders, and track parts usage, • Support emergency roadside service calls when needed, • Clean vehicles and maintain the shop environment, • Safely move vehicles around the yard or between work areas, • Repair and maintain shop tools and equipment You might be a perfect fit if you: • Want a job that directly supports your community, • Have 3+ of experience working with diesel, gas, electric, or CNG vehicles, • Are comfortable using hand tools and diagnostics software, • Are a strong problem solver who thrives both independently and on a team, • Have a valid driver's license and are willing to obtain a CDL (we'll help with training!), • Have or are willing to build a personal mechanic tool set, • High school diploma or GED (preferred), • Vocational or technical training in vehicle repair (preferred), • Class B CDL with passenger endorsement (or ability to obtain within 3 months), • ASE Certifications (preferred, with requirement to begin ASE testing within 1 year), • Experience performing DOT inspections and vehicle safety assessments, • Maintenance shop environment with dust, dirt, grease, and various weather exposure, • Must be able to lift at least 50 lbs and work in crouched or prone positions beneath vehicles First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Senior Project Manager – Healthcare-inpatient and ambulatory care interiors.Our client is an award-winning provider of innovative design solutions.Headquartered in New York City with satellite offices in Long Island.They currently have an immediate need for an experienced Senior Project Manager fo

Job Title: Salesforce Project Manager.Location: NY/NJ (Hybrid – 3 days/week).Seeking a Senior Project Manager to lead Salesforce B2B delivery projects, managing end-to-end execution, stakeholders, and cross-functional teams.Manage multiple Salesforce projects (scope, timeline, budget).Drive projec

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi

This role requires the ability to work lawfully in the U.Plus, enjoy perks like free and discounted internet, TV, and mobile, all while paving the way for a long and rewarding career with us.Schedule: Tuesday-Saturday OR Sunday-Thursday 12:00pm-9:00pm (with 1 hr.Do you enjoy solving technical challe

For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets.

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Electrical or Computer Engineering and a minimum of 4 years of relevant experience; or Masters degree from an accredited college or university in Electrical or Computer Engineering and a minimum

Looking for a lifetime career? Apply today! Job Description Do you have at least 2 years experience as an Electrical Engineer or Computer Engineer with a strong interest in development, testing, and support of instrumentation and control? The Naval Nuclear Laboratory is a mission-driven organization

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

Looking for a lifetime career? Apply today! Job Description The Naval Nuclear Laboratory is looking for an experienced Administrative Assistant to work in our New Design Directorate Shipboard Electrical Systems (SES) Department. For nearly 70 years, the Naval Nuclear Laboratory has developed advance

Chromalloy - - Responsibilities: Assist in troubleshooting, repairing, and maintaining electronic systems, control panels, and electrical components.

For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets.

FedEx - - Responsibilities: Load, unload, and sort packages of various sizes; Part time employees work one shift a day; full time employees work two shifts; Shift lengths vary based on package volume (3-6 hours for part time, 6-10 hours for full time); Overtime paid after 40 hours a week; Maintain