Electronics engineer jobs in Jersey City, New JerseyCreate job alerts

Job Title: Radiology Service Engineer Location: Cooperman Barnabas Medical Ctr Department Name: Imaging Services Req #: 0000217059 Status: Hourly Shift: Day Pay Range: $28.15 - $43.64 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Reports to assigned work locations as required to meet organizational needs. RSE2 demonstrates confidence using tools and test equipment to perform preventative maintenance and service on radiological equipment. Ensures radiological equipment meets manufacture specifications and is safe for patient care. Demonstrates troubleshooting skills necessary to complete most repairs on multiple modalities. When necessary provides information to assisting engineers to minimize down time and loss of continuity of care. Aids team members and other clinical engineering staff both remotely and onsite as required. Documents all work performed in a timely fashion and participates in the radiology emergency on-call program. Staff assists management in meeting regulatory requirements and department/organizational goals. Performs other duties as assigned or required. Qualifications: Required: * • Minimum AAS degree in Biomedical Engineering, Electronics Engineering Technology or equivalent work/military experience on radiology equipment., • 3+ years of experience servicing radiology equipment on more than one vendor and/or modality, • Can demonstrate proficient use of hand tools, • Working knowledge of electricity/electronics, • Working knowledge of mechanical and electro-mechanical components, • Can demonstrate proficient use of electronic test equipment including oscilloscope, • Can complete most repairs without assistance, • Working knowledge of MS-Office and other computer applications, • Working knowledge of computers and networks, • Working knowledge of radiological safety procedures, • Multiple manufacture certifications, • Attentive to detail and excellent follow-up with customers., • Excellent customer service skills, • Ability to work under pressure, • Ability to attend vendor technical training regardless of method or location, • Valid NJ Driver’s License Scheduling Requirements: • Days to work- 8A-4P M-F, occassional Saturday, • Full-Time, • Working Location(s): Livingston, possible local travel to other RWJBH sites Essential Functions: • Conducts preventive maintenance inspections appropriate to level of job competence using appropriate productivity & quality measures., • Completes monthly assigned tasks within the specified timeframe prioritizing inspections of high risk over low risk equipment., • Recognizes unsafe conditions & notifies appropriate management team members to correct them., • Works collaboratively with senior technical staff to creates & enter PM procedures following manufacturer guidelines., • Effectively responds to service requests, competently troubleshoots & repairs medical equipment appropriate to job proficiency level using established productivity & quality measures, demonstrating good judgment on performing component vs. circuit board level repairs., • Demonstrates the need to maintain an adequate level of parts on hand as applicable, to assist in keeping downtime to an absolute minimum., • Timely and accurately documents all service requests and repairs in the biomedical equipment database., • Inspects new devices & equipment with competence appropriate to job proficiency level. This includes judgment on safety, compliance with codes, standards & ability to learn about the function/performance of new devices with speed & comprehension., • Secures all required device information for biomedical equipment database., • Demonstrates the need to have current service and operator manuals on hand for proper servicing of all types of medical equipment., • Assists Manager in maintaining and fulfilling the department/organizational regulatory requirements and goals., • Complies with system, hospital and departmental policies and procedures and objectives., • Reports witnessed violations that put patients, staff, department or facility in jeopardy to appropriate management personnel., • Demonstrates a thorough knowledge of shop safety including the use of electronic test equipment., • Assists Manager with responding to/correcting medical equipment recalls/device alerts from manufactures and/or F.D.A., • Participates in On Call duties after normal working hours. Must respond to a call within 15 minutes by telephone, and report to the facility within a maximum of one hour if required to be on site., • Ability to give technical instruction to users over the phone minimizing equipment downtime while providing the continuum in patient care, and organizational cost effectiveness.

Job DescriptionJob Title: Facilities Maintenance Technician - Building Engineer Location: Newark. NJPay: $34/hrType of Placement: Direct HireShift: Must be open to start Job Description The Facilities Maintenance Technician will be responsible for the daily maintenance and repair of building facilities. This includes work on elevators, conveyor systems, mechanical systems, lighting systems, communication/radio systems, air handling/HVAC units, fire systems, plumbing systems, and more. Technicians may also work with PLC electronic systems, computer controls, and steel frame structures. Responsibilities • Perform maintenance and repair tasks on various building facilities including elevators, conveyor systems, and HVAC units., • Work with communication and radio systems, fire systems, and plumbing systems., • Engage in high and low voltage electrical repairs, including installation and repair of 110/220/480 volt single and multiphase electrical circuitry., • Read and follow wiring schematics for industrial wiring tasks., • Thorough knowledge of general building maintenance with an emphasis on electrical systems., • Experience in electrical troubleshooting including AC & DC circuits and high voltage (480) repairs., • Experience in industrial maintenance, electrical maintenance, and preventive maintenance., • Ability to read and follow wiring schematics., • Experience in electronics diagnostics and troubleshooting., • Valid, clean, applicable state driver's license. Enjoy a $10,000 sign-on bonus with half paid after 30 days and the other half after 12 months. Benefit from yearly pay increases, reaching up to $60.00 an hour after 8 years. Experience extremely competitive benefits. Work Environment The work environment includes both indoor and outdoor settings at airport terminals. Be prepared to work on a flexible schedule that covers all shifts, including weekends and holidays. Schedules are bid and awarded based on seniority. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $71802.00 - $71802.00/yr. We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). See attached SOP. Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 22, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Title: Mechanical Engineer II Location: New York, New York Duration: 6 Months W2 Contract (potential extensions) Our client is seeking a Mechanical Engineer with rapid prototyping, fixture development, and mechanical testing experience to contribute to wearable program, we seek someone with the curiosity to research and investigate the design and functionality of a new class of wearable technology. In this role, you will prototype and rework design concepts, generate fixture designs, make engineering drawings, execute testing, and analyze results. The role is 100% in-office in NYC. Years of experience needed: At least 3 years of experience, Candidates should be senior enough to own components independently Top 3 must-have HARD skills: • Mechanical design for consumer electronics (NX, SolidWorks, or equivalent parametric CAD), • Hands-on prototyping and fabrication (3D printing, CNC, fixture design, bench-level assembly and debug), • DFM experience with injection molding and/or sheet metal (tolerance stackups, GD&T, vendor drawing packages) Good to have skills: • Experience with wearable devices or miniaturized assemblies, • Familiarity with textile integration or flexible materials, • Comfort with test fixture design and bench-level reliability testing, • Working knowledge of thermal and structural FEA Responsibilities: • Research, design, develop, manufacture, and test wearable devices with a focus on rapid prototyping and device rework/repair, • Design mechanical test fixtures for both subsystem and system-level characterization and generate testing procedures, • Plan and execute Design of Experiments (DOEs) to evaluate key performance indicators for a wearable product, • Execute mechanical testing to characterize hardware using both standard and custom testing procedures, including 3-point bend testing for band stiffness and environmental testing, • Analyze test data against hardware specifications and contribute to the development of new KPI specs, • Assist on device failure analysis and conduct root cause investigations, • Provide 2D/3D CAD models of fixture and prototype concepts, • 100% in-office and lab work in NYC to include prototype assembly and rework, fixture development, and mechanical testing Education/Experience: • Bachelor's degree in mechanical engineering or a related field required

The Director of Engineering provides strategic and operational leadership for all engineering functions at a high-volume precision metal stamping manufacturer serving the automotive, electronics, and medical device industries. This executive-level role is responsible for driving product and process innovation, ensuring compliance with industry-specific quality and regulatory requirements, and developing a high-performing engineering team. The Director partners closely with Sales, Quality, Operations, and executive leadership to deliver competitive, manufacturable solutions that exceed customer expectations. KEY RESPONSIBILITIES Strategic Leadership & Business Development • Define and execute the engineering roadmap aligned with company growth objectives across automotive, electronics, and medical device markets., • Serve as the primary engineering liaison for key customer accounts during quoting, design, and program launch phases., • Evaluate and recommend capital equipment investments (progressive dies, transfer presses, automation) to expand manufacturing capabilities., • Oversee tooling design and die engineering for progressive, compound, and transfer dies used in high-precision stamped metal components., • Lead Design for Manufacturability (DFM) reviews and tolerance stack-up analyses for new part programs., • Drive Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) submissions for automotive customers (IATF 16949)., • Ensure engineering compliance with ISO 13485 design controls for medical device component programs., • Recruit, mentor, and manage a team of tool designers, process engineers, and manufacturing engineers., • Establish individual development plans, performance goals, and career advancement pathways., • Ensure all engineering activities comply with IATF 16949 (automotive), ISO 9001 (general), and ISO 13485 (medical device) quality management systems., • Lead root-cause analysis and corrective action (8D, CAPA) for engineering-related customer escapes., • Maintain complete and audit-ready DHF (Design History Files) and technical documentation for regulated industries., • Manage engineering project portfolios from concept through production launch, meeting cost, timing, and quality targets., • Coordinate new model introductions (NMI) and engineering change management (ECN) across internal and customer systems., • Support Operations with press setup optimization, tooling maintenance programs, and troubleshooting of high-volume production issues., • Oversee supplier tooling builds and subcontracted engineering services; conduct supplier technical reviews and audits. REQUIRED QUALIFICATIONS • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or closely related field (Master's preferred)., • 10+ years of progressive engineering experience in precision metal stamping, sheet metal fabrication, or closely related metal forming disciplines., • 5+ years of direct people management experience, including hiring and developing engineering staff., • Demonstrated experience supporting at least two of three target industries: automotive, electronics, or medical devices., • Deep proficiency in progressive and/or transfer die design, tooling materials, and press mechanics., • Working knowledge of APQP, PPAP, FMEA, control plans, and GD&T (ASME Y14.5)., • Familiarity with IATF 16949 or ISO 13485 quality management requirements., • Proficiency with CAD software (SolidWorks, AutoCAD, or equivalent) and CAM/simulation tools., • Strong project management skills with experience managing multiple concurrent programs. PREFERRED QUALIFICATIONS • Professional Engineer (PE) license or Six Sigma Black Belt / Green Belt certification., • Experience with automation integration (robotic part handling, vision systems, in-die sensing)., • Knowledge of surface finishing, plating specifications, and secondary operations common in electronics and medical components., • Familiarity with ERP/MRP systems (SAP, Epicor, or similar) in a job-shop or high-volume stamping environment., • Experience with Design of Experiments (DOE) and statistical process control (SPC). CORE COMPETENCIES • Technical Expertise in Metal Forming, • Cross-Functional Collaboration, • Customer Relationship Management, • Data-Driven Decision Making, • Strategic Thinking & Innovation, • Talent Development & Coaching, • Regulatory & Quality Mindset, • Change Management WORK ENVIRONMENT & PHYSICAL REQUIREMENTS This position operates in both an office/engineering environment and on the manufacturing floor. The Director is expected to spend regular time on the production floor engaging with press operators, toolmakers, and quality personnel. Ability to walk production areas, stand for extended periods, and observe precision stamping operations is required. Occasional lifting up to 30 lbs. PPE (safety glasses, hearing protection, steel-toed footwear) required in production areas.

As a family-run, high-tech company with nearly 19,000 employees at 71 locations worldwide, we are looking for forward thinkers with unconventional ideas and drive to join our team. Our company culture, which values collaboration and mutual trust, creates the ideal framework for boldly trying new things and questioning the status quo. Our technologies inspire people to develop and produce things that are currently unimaginable. Whether lasers, machine tools, EUV or electronics - TRUMPF is building technological worlds for future generations. Are you ready for new challenges? Do you thrive when solving problems on your own or as part of a team? Do you enjoy travel, learning about new places, and meeting new people? Are you interested in becoming a skilled mobile service technician? This opportunity reports into our Farmington, CT office and is offered as 100% remote. Your new role: TRUMPF Field Service Engineer * Travel to install, services, troubleshoot and repair TRUMPF CNC fabricating machine tools at customer sites throughout the United States, Canada and Mexico * Provide high-quality technical service to customers to ensure optimal sheet metal machine performance. * Document customer machine information and technical conditions and make improvement suggestions. * Train customers to operate and/or service machines to ensure maximum productivity. * Act as a TRUMPF Service ambassador and work directly with customers during installations and repairs to enable their business success. In return we offer • Competitive salary, • A generous benefits package that includes medical, vision, dental, 401K plans, and parental leave, • Flexible, professional, curious, and bold!, • A hands-on problem solver experienced in electronics, digital circuits, wiring, mechanics, and hydraulics., • Focused on customer service and quality., • Technologically savvy and experienced in software and file management., • At TRUMPF, you can develop your career by working on a wide range of innovative products across many exciting technologies., • You have the opportunity to continuously grow within your existing role and be rewarded for it., • We are an international company, offering employees opportunities in the U.S. and around the globe., • We are a family-owned business with a long-term strategy. We care about all the members of our team. TRUMPF Inc. endeavors to make TRUMPF careers pages accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance in completing the applications process, please contact our HR department at 860.255.6000 or at ___.This contact information is for accommodation requests only and can not be used to inquire about the status of application.

Software Engineer Professional (Pembroke, MA). Bachelor’s in Electronics Engineering, Computer Science, or related, or any foreign equivalencies.

Description: Chips Talk, We Listen proteanTecs is a game-changing startup that's giving advanced electronics the power to report on their own health. In a digital world built for autonomous driving, cloud computing, and AI, we depend on computing systems daily. But how can we guarantee their safety, reliability and functionality? proteanTecs is the first-ever company to provide visibility into next-gen chips while they are operating, based on the power of on-chip monitoring, machine learning, and data analytics. Here at proteanTecs, you'll be part of a team that's unlocking deep insights to make electronics more reliable, efficient, and high-quality. We're trusted by industry leaders in data centers, automotive, communications, and consumer devices – we work with the world's largest and most notable companies in tech. Why proteanTecs is a great place to work: • Fast-paced and impactful: We're a mission-driven startup, so you'll tackle new challenges daily, wear many hats, and see your work directly influence the future of electronics., • Supportive company culture: Learn from the best. Our 200+ team members are experts in their field with a proven track record of success, and they're committed to fostering a collaborative and supportive work environment., • International presence: We're a multinational company with a diverse team across multiple locations around the globe. You'll collaborate on projects with international impact, gaining a global perspective of the tech industry., • Work with industry leaders: Our solutions are used by the biggest names in tech. You'll be part of the team creating the next generation of groundbreaking products., • Cutting-edge playground: We use the latest machine learning, platforms, and tools to push boundaries and achieve breakthroughs., • Real-world impact: Our work keeps data centers, cars, and other critical systems running smoothly. Your work will directly contribute to safer, more reliable electronics., • Linor Harnik, Software Engineer - “The atmosphere here is great. Everyone's super welcoming, even the dogs! I’m happy to be part of something that's making a big difference in the industry.”, • Muhamed Eid, Logic Design Engineer - "The company believes in the team and respects them, providing us with multiple opportunities to challenge ourselves and grow, we are never bored here", • Guy Gozlan, Director of Machine Learning - "We create a never before seen solution that dramatically impacts one of the most important industries of our time" We are seeking an experienced and strategic Sales manager to join our team in the USA. This customer-facing role requires working in a large team environment including: leadership for directing and coordinating sales and field AE resources, coordination/facilitation of customer interaction between proteaanTecs Product Marketing/Engineering, understanding of the core technology requirements in the digital implementation and/or IP space, coordination of sales strategies and efforts across worldwide customer operations. • Leading pre/post-sales campaigns, managing and growing solution adoption in the territory for proteanTecs IP and solution platform., • The ability to foster and grow customer relationships throughout all levels of the customer organization to better connect our solutions with the customer's problems/business challenges and insure roadmap alignment for long term success., • Working knowledge of Strategic Selling techniques such as Miller Heiman, or Target Account Selling a plus., • Must have a deep technical knowledge and understanding of digital implementation flows (synthesis, place & route, and signoff) and/or experience with IP’s or software platforms . Understanding of semiconductor manufacturing eco-systems. Understanding of DFT chip bringup and manufacturing flows is plus. Requirements: • Min 4+ years in sales and account management or as an Applications Engineer or Design Engineer with proven track record of success, • Deep understanding of electronic systems and HW design, • Minimum MSEE/CS degree Responsibilities: • You will be responsible for building, developing, and driving a sales pipeline for our processor IP technology and software solutions in key accounts across the Silicon Valley., • Responsibilities include developing and managing a sales pipeline while driving market penetration, adoption, and revenue, • You will work closely with multi-functional teams including Application Engineers, Business Unit Marketing, Legal, Finance, proteanTecs executives and collaborate with proteanTecs sales team to achieve sales targets in the region, • Generate, develop, qualify, and drive new business opportunities in the region, including:, • Opportunity management, • Manage contract negotiations (business and legal) with customers and proteanTecs functional teams, • Articulate key value propositions for the adoption of the unique proteanTecs solution with key semiconductor companies, across the organization (executive management, marketing, architects, hardware, and software engineers), • Collaborate with technical and marketing teams to develop and execute strategies for proliferation of the technology in the region, • Provide market and account feedback to the RnD and Marketing BU to drive product roadmaps and strategies, • Track activities and provide reports to management, BU and executive personnel on account strategies activities and progress, • Develop and execute against strategic sales plans, • Maintain regular contact with multiple internal BU's team to drive enterprise-wide strategic activities

PsiQuantum’s mission is to build the first useful quantum computers—machines capable of delivering the breakthroughs the field has long promised. Since our founding in 2016, our singular focus has been to build and deploy million-qubit, fault-tolerant quantum systems. Quantum computers harness the laws of quantum mechanics to solve problems that even the most advanced supercomputers or AI systems will never reach. Their impact will span energy, pharmaceuticals, finance, agriculture, transportation, materials, and other foundational industries. Our architecture and approach is based on silicon photonics. By leveraging the advanced semiconductor manufacturing industry—including partners like GlobalFoundries—we use the same high-volume processes that already produce billions of chips for telecom and consumer electronics. Photonics offers natural advantages for scale: photons don’t feel heat, are immune to electromagnetic interference, and integrate with existing cryogenic cooling and standard fiber-optic infrastructure. In 2024, PsiQuantum announced government-funded projects to support the build-out of our first utility-scale quantum computers in Brisbane, Australia, and Chicago, Illinois. These initiatives reflect a growing recognition that quantum computing will be strategically and economically defining—and that now is the time to scale. PsiQuantum also develops the algorithms and software needed to make these systems commercially valuable. Our application, software, and industry teams work directly with leading Fortune 500 companies—including Lockheed Martin, Mercedes-Benz, Boehringer Ingelheim, and Mitsubishi Chemical—to prepare quantum solutions for real-world impact. Quantum computing is not an extension of classical computing. It represents a fundamental shift—and a path to mastering challenges that cannot be solved any other way. The potential is enormous, and we have a clear path to make it real. Come join us. Job Summary: The OS Core Team at PsiQuantum works closely alongside engineers and scientists in the electronics, system architecture, and validation teams and is responsible for building the scalable, distributed, fault-tolerant control plane and operating system for utility scale photonic quantum computers. Our team is responsible for orchestration, scheduling, kernel architecture, co-design, calibration, validation, providing abstractions, systems, and operating software for the immense heterogenous fabric of co-processors, networks, and photonics that are critical to the success of our company’s goal of building the world’s first useful quantum computer. As a Senior Software Engineer, Calibration & Control you will design and implement algorithms, controls, and software that keep our quantum processors in spec 24×7x365. Responsibilities: The core of our system revolves around a high performance, scalable graph database which contains critical information to control and manage PsiQuantum computing systems. Your role is to scale and extend the current core database systems to support the massive increase in size complexity of our systems. Daily functions: Data systems design and implementation. Participate in design and code reviews. Collaborate across software, hardware, and research teams at PsiQuantum. Testing and maintenance of database software. Champion and serve as an exemplar of good software development practices at PsiQuantum. Experience/Qualifications: 15+ years experience with Python or C++ in a system software context. Design and implementation of large scale distributed storage systems, emphasis on graph databases. Proven track record of developing and shipping reliable, performant software in a high scale or mission critical context. Bachelors degree in a technical discipline preferred, or equivalent experience. Ways to stand out: Experience in graph database systems such as Nebula, neo4j. Experience in high performance computing and data design. Experience in computer architecture. Experience in high performance networking. Experience with highly scalable distributed systems in a reliability and up-time critical environment. PhD in a related technical discipline is a plus but not required. [We are open to adjusting the compensation to experience level] Note: PsiQuantum will only reach out to you using an official PsiQuantum email address and will never ask you for bank account information as part of the interview process. Please report any suspicious activity to ___. We are not accepting unsolicited resumes from employment agencies. The ranges below reflect the target ranges for a new hire base salary. One is for the Bay Area (within 50 miles of HQ, Palo Alto), the second one (if applicable) is for elsewhere in the US (beyond 50 miles of HQ, Palo Alto). If there is only one range, it is for the specific location of where the position will be located. Actual compensation may vary outside of these ranges and is dependent on various factors including but not limited to a candidate's qualifications including relevant education and training, competencies, experience, geographic location, and business needs. Base pay is only one part of the total compensation package. Full time roles are eligible for equity and benefits. Base pay is subject to change and may be modified in the future. U.S. Base Pay Range $180,000 - $205,000 USD Bay Area Pay Range $200,000 - $220,000 USD

Senior Software Engineer (C/C++ & Python, Networking Domain) Miramar, FL About Quvia Quvia is the AI-powered quality of experience (QoE) management platform for things that move like ships and planes, transforming connectivity and digital experiences even in the most remote and hard-to-reach places. Our platform uses AI and machine learning to seamlessly blend any combination of connectivity, regardless of provider, orbit, or network, into one vendor-neutral environment. Quvia delivers comprehensive, end-to-end analytics and dynamic network orchestration that optimizes for the best possible QoE for applications and end-users. Today, Quvia partners with world-leading Fortune 500 companies in aviation, cruise, shipping, and beyond. Why Quvia? Founded in 2019, Quvia is a fast-growing, Series A tech startup passionate about redefining global connectivity. Our solutions are already addressing significant challenges in the aviation and cruise industries and we’re just getting started. With headquarters in the greater Miami region and offices in the UK and India, our remote-first culture empowers talented individuals around the world to make a lasting impact. Quvia is backed by Columbia Capital, a respected venture capital firm with over $5 billion in fund commitments. Position Overview We are seeking a Grid Data Path Engineer with strong proficiency in C/C++ and Python, and solid experience in the networking domain. The ideal candidate will be responsible for designing, developing, and maintaining software systems that power next-generation networking solutions, with a focus on performance, scalability, and reliability. Having hands-on experience in virtualized environments (VMs) — including setup, configuration, and network integration — along with the ability to design and develop robust, scalable networking software is also an essential requirement. In order to be considered, candidates must be based in South Florida, and live within a commutable distance to our headquarters in Miramar. Key Duties and Responsibilities: • Design and develop software modules using C/C++ for high-performance network applications., • Part of the software also involves integrating with Python based modules., • Work on L2–L7 networking protocols such as Ethernet, IP, TCP/UDP, BGP, OSPF, MPLS, and others., • Collaborate closely with architecture and QA teams to define and deliver robust software components., • Debug and resolve complex issues across multiple layers (application, transport, and network)., • Analyze crash files and debug with the team to resolve them, • Configure and troubleshoot virtual networking in virtual machine (VM) environments — bridges, TAP/TUN interfaces, VLANs, and virtual switches (like OVS)., • Deploy and test networking software inside VMs or virtualized test environments (e.g., KVM, VMware, VirtualBox, or cloud VMs)., • Collaborate with DevOps and QA teams to ensure seamless deployment, configuration, and testing workflows., • Participate in design and code reviews, enforcing best practices for maintainable, high-quality code., • Mentor junior engineers and contribute to technical design discussions and documentation. Requirements: • Bachelor’s or Master’s degree in Computer Science, Electronics, or related discipline., • 7–10 years of hands-on software development experience in C/C++ and Python., • Strong understanding of networking concepts and protocols — IPv4/IPv6, ARP, VLAN, TCP/IP stack, routing, switching, or network virtualization., • Experience with Linux based systems — system programming, socket programming, and multithreading., • Hands-on experience with packet capture/analysis tools (Wireshark, tcpdump, etc.)., • Exposure to DPDK/VPP, SDN/NFV, or network appliances is a strong plus., • Experience integrating software with network management systems (NMS), SNMP, or REST APIs., • Familiarity with CI/CD pipelines, Git, Jenkins, Docker, Kubernetes preferred., • Excellent problem-solving and debugging skills in distributed systems., • Good understanding of software design patterns and performance optimization techniques., • Strong analytical thinking and attention to detail., • Good communication skills and ability to work in a collaborative environment., • Proven track record of delivering production-quality software in fast-paced teams. Preferred / Good to Have: • Experience with VPP (Vector Packet Processing) or DPDK-based applications., • Strong understanding of networking concepts — TCP/IP stack, routing, switching, VLANs, ARP, IPv4/IPv6., • Proven experience with Linux/Unix systems, socket programming, and multithreaded applications., • Hands-on experience in setting up and managing virtual machines and virtual networks —, • including KVM, libvirt, VMware, or VirtualBox., • Familiarity with configuring bridges, vSwitches, TAP/TUN interfaces, and NAT or host-only networking., • Exposure to OpenConfig, NETCONF/YANG, gRPC, or telemetry systems. What We Offer: • Competitive salary, • Equity options, • Performance-based bonus opportunities, • Medical, Dental and Vision benefits, • Life Insurance, • Flexible PTO policy, • 401(k) plan

Jama Software® is focused on maximizing innovation success in multidisciplinary engineering organizations. Numerous firsts for humanity in fields such as fuel cells, electrification, space, software-defined vehicles, surgical robotics, and more all rely on Jama Connect® requirements management software to minimize the risk of defects, rework, cost overruns, and recalls. Using Jama Connect, engineering organizations can now intelligently manage the development process by leveraging Live Traceability™ across best-of-breed tools to measurably improve outcomes. Our rapidly growing customer base spans the automotive, medical device, life sciences, semiconductor, aerospace & defense, industrial manufacturing, consumer electronics, financial services, and insurance industries. Jama Software is seeking a smart, multifaceted Solutions Consultant with experience in the Aerospace or Defense industry. The Consultant is responsible for proactively consulting, mentoring, and encouraging adoption of our products and services to a portfolio of customers ensuring achievement of sustained value from Jama Software. • Become a subject matter expert in Jama’s products and offerings, specifically our airborne systems and defense systems solutions, • Proactively lead multiple customer engagements; work directly with clients on how to align their process and Jama Connect to relevant system engineering methodologies, • Lead client working sessions to drive both process and technology decisions for how Jama Connect solutions will meet the client’s requirements and verification processes, • Deliver onsite and remote training of the Jama Connect solution to onboard new users, • Document and share best practice articles and enablement assets to scale our delivery maturity, • Identify and seek resolution of barriers that could inhibit end user adoption, • Assist Solution Lead in enhancing our industry solution offerings, • Work with Solution Lead and vertical sales leadership to drive industry business strategy, • Find and engage with engineering leaders responsible for process outcomes and help drive performance improvement through Jama Software’s products and solutions, • Other duties as assigned., • 3-5+ years direct experience with requirements, test management, and digital engineering methodologies in the Aerospace and/or Defense industries, • Experience managing the deployment of SaaS software solutions to end-users with a particular view towards managing adoption milestones and identifying expansion opportunities, • Highly motivated and self-directed to own large portfolio of customer engagements, • Knowledge of system engineering, requirements management, test management, and functional safety methodologies, • Excellent presentation, meeting facilitation, and interpersonal skills, • Ability to seek out and build positive relationships with people at various levels and departments, • Previous experience operating as a Systems Engineer, Requirements Manager, Product Manager, • Experience facilitating process and quality maturity level evaluations for their customers, • Direct experience implementing Jama Connect at their organization, • Virtual first and culturally diverse work environment spanning 8 countries., • Ambitious and fun work with a chance to define distinct, company-shaping tangible contributions., • Flexible time off and leave programs crafted to meet the needs for your rejuvenation and extra support to cope with life events with a quarterly $75 wellness reimbursement., • Comprehensive and affordable medical, dental and vision plans with pre-tax savings accounts and a generous 401(k) employer match., • 6+ weeks of paid parental leave to bond with your new family member., • Emphasis on learning and development at all levels with a subscription to LinkedIn Learning. At Jama Software, we welcome passionate individuals who have the unrestricted right to work in the United States, including natural citizens and Green Card holders, and reside in eligible states to join our team. Jama Software participates in E-Verify and will provide the federal government with your Form I-9. If you get to this point, we hope you're feeling excited about the job you just read. Even if you don't feel that you meet every single requirement, we still encourage you to apply. We're eager to meet people that believe in Jama Software’s mission and can contribute to our team in a variety of ways – not just candidates who check all the boxes. Jama Software is an Equal Opportunity Employer. Qualified applicants will be considered without regard to any characteristic protected under federal, state, or applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us at ___ to request an accommodation.

Job Description Position Description A client of AlphaStaffHCM is looking for a Software Engineer with deep expertise in Quantum Information Theory and Network Security. This role is critical in building a secure data path for our quantum networking products. You will responsible for using theoretical quantum principles and photonic hardware to create deployment-ready software for Quantum Key Distribution (QKD), Quantum Zero-knowledge Proof (QZEK-P), Quantum Physical Unclonnable Functions (QPUF), and secure entanglement distribution. Responsibilities • Design and implement high-performance C++ software for real-time quantum cryptographic protocols, including entanglement-based polarization and time-energy QKD., • Develop efficient algorithms for classical post-processing in quantum-secured systems, specifically focusing on Error Correction (Information Reconciliation), Privacy Amplification to maximize secure key rates, and quantum authentication/confirmation., • Architect the Hardware Abstraction Layer (HAL) for distributed quantum networking nodes (Alice/Bob), interfacing with single-photon detectors, polarization controllers, and time-tagging electronics., • Optimize the full cryptographic stack for latency and throughput, ensuring seamless integration between quantum key generation, quantum authentication/confirmation, and the key management entity.., • Collaborate with optical physicists and FPGA engineers to deliver new features and provide updates as existing hardware is upgraded over time., • Develop simulation tools to model channel loss, noise sources, and the statistical performance of quantum protocols. Required Qualifications • Bachelor’s degree in Computer Science, Electrical Engineering, Physics, or Mathematics is required., • 6+ years of experience in software engineering with a focus on systems, security, or embedded devices., • Strong proficiency in C++ and Python., • Deep domain knowledge of Quantum Key Distribution (QKD) protocols (e.g., BB84, E91, BBM92) and their implementation requirements., • Experience implementing Error Correction codes (e.g., LDPC, Cascade, Winnow) or Forward Error Correction (FEC) specifically for noisy communication channels., • Understanding of Quantum Information concepts, including entanglement distribution, Bell state measurement, and qubit polarization encoding., • Familiarity with high-speed data acquisition and processing protocols (e.g., PCIe, DMA, UDP/TCP)., • Familiarity with Linux system programming and build toolchains (CMake, GCC/Clang). Preferred Qualifications • Knowledge of classical cryptography standards (AES, RSA, ECC) and PKI infrastructure., • Familiarity with Post-Quantum Cryptography (PQC) algorithms (Lattice-based, Hash-based)., • Experience with network security protocols (IPsec, TLS/SSL) and how QKD integrates into the OSI model., • Background in Information Theory and statistical analysis for security proofs. Preferred Education • Master’s or Ph.D. in Quantum Information Science, Physics, or Cryptography is highly preferred. Skills C++, Python, Quantum Key Distribution (QKD), Error Correction, Cryptography, Network Security, Entanglement, Polarization, High Performance Computing, Linux, Algorithms. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking for an experienced, organized, and motivated systems engineer. This position will work on an interdisciplinary team to integrate numerous first-of-a-kind technologies while developing scalable processes and procedures. The Systems Engineer will be responsible for the managing requirements, integration, and interfaces for one of the most consequential and cutting-edge technologies of our generation - fusion energy. The Thea Energy team is comprised of self-motivated, innovative, and collaborative individuals with an excitement for solving complex problems. This is a challenging position that requires a high degree of autonomy, and the ideal candidate must be able to move quickly. A proven track record of leading systems engineering, excellent communication skills, and a passion for new technologies and innovation is required.Key Responsibility Areas: • Develop system and interfacing requirements, protocols, and procedures, • Work closely with engineering and physics teams designing various systems to provide engineering coordination and support, • Ensure the efficient and systematic conversion of functional requirements into a scalable system architecture and execution strategy, • Assist in the management of technical, schedule, cost, and performance analysis for various development programs, • Develop and enact protocols to inform clear and efficient decision making processes, • Manage updates and changes to systems and interfaces, and monitor impacts to program schedule, cost, and performance, • Manage system configuration control, • Manage the product breakdown structure, • Coordinate with suppliers, vendors, and internal manufacturing engineering teams, • Coordinate design reviews and program management functions, • Institute the processes for, and help run HAZOPS and FMECA programs, • Implement an effective design integration program, • Develop and manage effective processes for making and tracking key decisions, • Develop and implement verification and validation processes, • Implement system design lifecycle management processes Ideal Experience & Skillsets:, • Bachelor's degree in a relevant engineering field, • 5+ years of experience in systems engineering, • Proven experience integrating large industrial and /or first-of-a-kind R&D projects (e.g. power plants, manufacturing facilities, particle accelerators, etc.), • Experience across mechanical, electrical, and fluid systems, • Experience with cryogenic, heating, fluid, vacuum, power electronics, and control systems is preferred but not mandatory, • Familiarity with the processes needed to build, test, troubleshoot, and scale complex mechanical and electrical systems, • Strong communication, collaboration, and interpersonal skills, • Ability to innovate, execute, and flourish in a fast-paced environment, • Exceptional work ethic, • Prioritization of safety above all else, • Ability to wear many different hats, • Team player who is excited to help others, • Ability to occasionally lift objects up to 50 lbs. Company Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description YOOBIC is the leading AI powered frontline employee experience platform. While most tech companies build for desk based teams, we build the operating system for the deskless workforce. The 80 percent of global employees who power retail and hospitality. Our mobile first platform helps frontline teams communicate, learn, and execute better every day. By combining operational data, Predictive Analytics, and AI, we help the world’s biggest brands turn frontline execution into a competitive advantage. Trusted by 300 plus global brands including Michaels, Mattress Firm and National Vision. YOOBIC is scaling fast. Backed by a 50 million dollar Series C and investors including Highland Europe, Felix Capital, and Insight Partners, we are building the future of frontline work. What we are looking for. We’re looking for an ABM leader with a GTM engineer mindset to join our marketing team — someone who deeply understands the ABM motion in B2B SaaS and has a proven track record of building programs that generate enterprise pipeline. This is a true strategist + operator role. You will set the ABM and pipeline strategy, and lead a significant portion of the execution yourself. You won’t operate alone: you’ll partner closely with Content, Events, Product Marketing, and the broader marketing team. But you should be comfortable rolling up your sleeves, building workflows, launching campaigns, and optimizing programs hands-on. You’re excited by all the “cool new kids” in marketing tech and comfortable jumping into the tools to build, test, and improve. You combine ABM expertise with systems thinking, technical curiosity, and strong pipeline accountability. We sell to some of the most exciting brands in global retail across fashion, luxury, grocery, specialty, C-store, and QSR. Our buyers are retail operations, innovation, and communications leaders. They are not typical tech buyers, which makes the engagement motion dynamic and nuanced. You’ll operate at the intersection of Marketing, Sales, and RevOps, designing how signal turns into engagement, engagement into meetings, and meetings into pipeline. You are part strategist, part builder, with a strong appreciation for long sales cycles and complex buying committees. What You’ll Own * Global ABM Strategy & Execution * Design and scale 1:1, 1:few, and 1:many ABM programs globally * Execute multi-channel plays across digital, outbound, website personalization, paid media, events, and sales sequences * Define ICP segmentation and tiering using firmographic, technographic, behavioral, and intent data * Build persona-based messaging across buying committees * Align closely with Sales on account plans, engagement strategy, and pipeline targets * You’ll set the strategy and personally drive key programs forward in partnership with Content, Events, and Product Marketing. GTM Systems & Marketing Technology Orchestration * As an ABM leader with a GTM engineer mindset, you think in systems and enjoy building them. * Design workflows across Claude and tools like Seam.ai, HubSpot, Influ2, Salesforce, and intent platforms * Build trigger-based programs (intent surges, job changes, buying committee engagement) * Work with our Rev Ops team to develop routing logic and alert systems for BDRs and AEs * Partner with RevOps on scoring, enrichment, and automation * Build dashboards tracking engagement-to-pipeline conversion * Continuously test and adopt emerging GTM tools * You don’t just use tools — you understand how they connect to drive revenue. You will own US pipeline creation. * Set and manage quarterly and monthly pipeline targets * Align outbound with ABM campaigns and intent signals * Lead pipeline reviews and address engagement gaps * Ensure marketing insights translate into sales conversations * You understand how outbound fits into an integrated ABM ecosystem and how to empower BDRs with the right data and context. What We’re Looking For Experience: * 5–7+ years in B2B SaaS marketing * 3+ years building and executing enterprise ABM programs * Proven success generating qualified pipeline through ABM * Strong hands-on experience with ABM platforms (6sense, Demandbase, UserGems), and other GTM tools - HubSpot, Salesforce, Gong, Clay Profile: * ABM leader with a GTM engineer mindset * Comfortable owning strategy and executing hands-on * Experience selling into global markets * Deep understanding of ABM in B2B SaaS sales environments * Highly technical and curious about emerging GTM tools * Comfortable building workflows between Claude and tools like Salesloft, UserGems, HubSpot,Salesforce, and enrichment tools * Data-driven and focused on engagement-to-pipeline performance * Strong cross-functional collaborator across Marketing, Sales, and RevOps * Confident people manager with a builder, test-and-learn mentality * Comfortable in a fast-paced entrepreneurial environment What We Offer: * Hybrid working if based in NY (3 days a week in the office Monday, Tuesday and Thursday with lunch provided on Monday & Thursday * Remote if based outside of NY * 20 days PTO + 8 public holidays (plus 3 floating holidays to choose from) * Medical cover and EAP (Employee Assistance Program) * Company covered Life insurance coverage * Company covered long term disability coverage * An amazing 401k contribution - We contribute even if you don’t! * ADP discounts for a whole host of items (including electronics, Childcare, travel, etc…) * Free online HIIT sessions + gym discounts The base salary range for this position is $135,000–$145,000 per year. This represents our good faith estimate of the compensation at the time of posting. Final compensation will be determined based on experience, skills, and location. We are an equal opportunity employer that values diversity and inclusion. We are committed to equal employment opportunities and we want to ensure that our recruitment process is accessible to everyone. If you have a disability or additional need that requires reasonable accommodations during the process please do not hesitate to let us know. All applicants will be considered for employment without attention to race, colour, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description POSITION DESCRIPTION The Compliance Engineer/Senior Compliance Engineer is responsible for participating as a compliance monitoring team member in making determinations of compliance with NERC Operations and Planning (O&P) Standards and, under certain circumstances, NERC Critical Infrastructure Protection (CIP) Standards. KEY RESPONSIBILITIES • Evaluates Registered Entity evidence, as an Audit Team member, to determine compliance with applicable NERC O&P Reliability Standards., • Serves as the Audit Team Lead when assigned (Senior Compliance Engineer)., • Mentors staff on O&P Standards and operational practices (Senior Compliance Engineer)., • Reviews the facts and circumstances of audit findings to provide input on initial root cause and risk to the Bulk Power System., • Assesses the maturity of Registered Entities internal controls as part of document and evidentiary reviews., • Creates sufficient documentation to support NPCC’s compliance determinations and ensures a complete and final record exists., • Supports the Compliance Monitoring program with the creation and maintenance of compliance monitoring documentation, records, and metrics., • Maintains awareness of NERC Rules of Procedure, NERC Reliability Standards, NERC Reliability Standards under development, and related projects and activities., • Leads efforts to identify operations and planning trends within NPCC and develop outreach or other analysis documents., • Provides subject matter expertise to the Registration, Certification, and Risk and Enforcement departments on completed compliance monitoring engagements including conclusions and internal controls; assessment and risk of potential non-compliances; and mitigation activities., • Provides training, education, and communications to NPCC staff, Registered Entities, and ERO Enterprise staff., • Represents NPCC on ERO compliance monitoring related task forces, working groups, and special projects., • Bachelor’s degree in electrical engineering, power systems engineering, electronics engineering, or industry-related field of study with 5 or more years related industry experience; or equivalent combination of education and related industry experience showing the ability to perform major duties., • 5 - 10 years of experience in the electric utility industry or related technical industry in at least one of the following discipline areas:, • Transmission protection system design, testing, and maintenance, • Generation protection system design, testing, and maintenance, • Transmission operations, generator operations, balancing area operations, reliability coordination, • Engineering planning studies for the transmission planning (TPL) standards, • Energy Management System (EMS) engineering, • Supervisory Control and Data Acquisition (SCADA) modeling, • Substation project design and maintenance, • Transmission line design and maintenance, • NERC O&P Standards and related internal controls, • Extensive experience with Inverter-Based Resources (IBRs), Generator Compliance, and/or modeling. A Plus: • Master’s degree in electrical engineering, power systems engineering, electronics engineering, or industry-related field of study, • Related auditor or professional certifications or licenses (e.g., Certified Internal Auditor, NERC Reliability Coordinator or Transmission Operator certification) FUNCTIONAL COMPETENCIES • Effective knowledge of NERC Rules of Procedure, NERC Reliability Standards, NPCC Reliability Criteria, Directories and Procedures., • Able to develop and deliver professional presentations., • Able to effectively engage and participate in discussions with stakeholders., • Ability to work on multiple assignments with minimal guidance., • Ability to complete tasks in a timely and efficient manner., • Excellent verbal and written communication skills, including presentation skills., • Excellent interpersonal and conflict resolution skills., • Excellent organizational skills and attention to detail, including project management., • Strong analytical and problem-solving skills., • Strong proficiency in Microsoft Office Suite programs., • Prolonged periods of working on a computer., • Travel to main office and in-person meetings, as required (barring no restrictions based on travel or health advisories, or occupancy restrictions). NPCC is proud to be an Equal Opportunity Employer committed to diversity and inclusion in the workplace. Employment, including the decision to hire, promote, discipline or discharge, will be solely based on competence, performance, and business needs. We prohibit discrimination on the basis of the individual’s actual or perceived disability, protected veteran status, race, color, sex, age, national origin, religion, sexual orientation, gender, gender identity, gender expression, genetic information, marital status, citizenship, domestic violence victim status, or any other status protected under federal, state or local law. THIS IS A REMOTE POSITION Compensation details: 120000-150000 Yearly Salary PI1ccd91061c79-25405-40148276

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Power Electronics Engineer to design and develop the HTS magnet power supply systems for the company’s Eos integrated stellarator. This role focuses on building a high-current AC-DC converter for HTS magnets, requiring precision current regulation, high reliability, and scalable architecture. This role will be responsible for power stage design, topology selection, control algorithm interface, and protection systems, as well as thermal and mechanical integration. This is a high-impact engineering role with hands-on prototyping, testbed validation, and cross-functional collaboration with embedded systems and instrumentation teams. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the topology selection, component specification, and schematic design of the HTS Magnet PSU., • Design modular power converters with potential for arrayed operation and independent control., • Analyze and simulate power converter behavior (steady-state, dynamic, fault response) using PLECS, LTspice, or Simulink., • Integrate with embedded control hardware and firmware, ensuring proper current regulation, fast feedback, and fault handling., • Define and implement magnet protection mechanisms, including overcurrent shutdown, fast discharge, and crowbar circuits if needed., • Design thermal management systems, including heat sink layout, forced air/water cooling, and temperature monitoring for continuous operation., • Design PCB layout and support mechanical integration, cabling, and in-house assembly., • Develop test plans and perform hardware bring-up, debugging, and parameter optimization under staged load conditions.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or a related field., • 5+ years of hands-on experience designing and testing power converters, preferably in high-current or magnet power supply applications., • Proficiency in power stage design for DC/DC converters, buck/boost, full-bridge, or current-regulated linear stages., • Strong simulation and modeling skills using tools such as PLECS, LTspice, PSIM, Simulink, or Simplorer., • Experience with IGBTs, MOSFETs, SiC/GaN devices, and high-current busbar and interconnect layout., • Familiarity with current sensors, signal conditioning, and analog control circuits., • Experience with magnet power supplies, fusion, accelerator, or industrial high-current systems., • Knowledge of quench detection, crowbar protection, and superconducting magnet interface requirements., • Experience with thermal design and integration of cooling solutions in power electronics., • Exposure to EMI/EMC mitigation strategies and compliance testing., • Familiarity with FPGA- or DSP-based digital control systems., • Simulation: PLECS, LTspice, PSIM, Simulink., • CAD: Altium Designer, OrCAD., • Measurement: Oscilloscopes, Power Analyzers, Electronic Loads., • Communication: CAN, RS-485, Modbus., • Thermal: Flotherm, SolidWorks for mechanical integration.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is looking for an experienced, highly motivated Electrical Engineer to join its rapidly growing team. The Electrical Engineer will work collaboratively across a cross-functional engineering team to help develop Thea Energy’s core planar coil stellarator fusion technologies. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Design, construct, and operate power supplies and control systems for high-temperature superconducting magnets and plasma heating systems (ECRH)., • Specify, design, develop, fabricate, and commission bespoke electronic systems, encompassing low-signal analog and digital equipment, capable of operating in high-stress industrial environments including high magnetic field, vacuum, and cryogenic temperatures., • Provide comprehensive specifications and facilitate the procurement of commercial off-the-shelf electronic products., • Actively engage in discussions to define requirements for the systems to be designed., • Provide full-cycle project support, from design to operation, including prototyping and testing of samples., • Collaborate and communicate effectively with engineering, physics/science, project management, and procurement groups., • Generate and revise work packages, including electrical drawings and technical specifications., • Manage critical procurement contracts and coordinate with vendors for electrical system design, procurement, and commissioning., • Select and implement industry standards (IEEE, ANSI, IEC, etc.) for use in prototyping projects and the future fusion power plant ecosystem., • Maintain a detailed project schedule, oversee the delivery of externally furnished documentation and equipment, and coordinate subcontractors. Ideal Experience & Skillsets:, • MS, or PhD in Electrical Engineering or related fields., • 5+ years of experience in the design and implementation of electrical and electronic systems in an industrial and/or scientific environment., • Technical proficiency in multiple areas of electrical engineering, including a subset of the following: power conversion, medium voltage distribution, switchgears, protective relaying, low voltage process-industrial facility design, instrumentation, and control., • Experience using PCB design software (Altium)., • Experience using CAD software (AutoCad, Solidworks)., • Experience in designing front-end analog electronics (differential amplifiers, trans-impedance amplifiers, precise and fast voltage comparators)., • Experience in the design and implementation of power electronics components: PWM converters (GaN/SiC/MOSFETs/IGBTs.), DCL-capacitors, high-frequency transformers, and inductors., • Experience using simulation software (PSpice, PLECS, MATLAB, Simulink)., • Nice to have experience with designing DSP- and MCU-based embedded control systems., • Experience in the integration of software and hardware in a high voltage, high current environment would be beneficial., • Experience in pulsed power systems; electrical and mechanical transient analysis and/or design implications in complex power systems., • Demonstrated ability to manage system installation within a complex project. Ability to interface with contractors, vendors, and designers., • Excellent written and verbal communication skills, ability to conduct design reviews, and organize/present material to both expert and non-technical audiences., • Ability to take initiative, work independently, and as part of a team., • Comfortable working to aggressive deadlinesCompany Benefits:, • Salary range $130,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Position Description A client of AlphaStaffHCM is seeking a motivated and enthusiastic Mechanical Engineer to join our dynamic engineering team. As a Mechanical Engineer, you will play a key role in the design, development, and testing of hardware components for our innovative projects. This position drives the mechanical design of server chassis for quantum photonic systems, the structural platforms that house, support, and stabilize quantum computing hardware ensuring precise integration of electronics, power distribution, cabling, cooling and optical components. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities • Closely work with engineering teams to review the product specification and design of chassis mechanical, thermal, system architecture to enable competitive, high quality server chassis products, • Support the development of several platforms based around classical and quantum photonics as a mechanical engineer., • Drive designs from concept to mass production, focusing on functionality, reliability, manufacturability and cosmetic requirements., • Create and publish detailed 3D CAD and 2D drawings for designs including GD&T, material selection and manufacturing methods., • Collaborate with external vendors and manufacturers to support product development, prototyping, and production readiness, • Cross-functional work with internal teams such as hardware, photonics, operations, and product managers to deliver products that meet performance, cost, and schedule requirements., • Participate in the prototyping and assembly of products and proof-of-concept models. Soldering work will be present., • Work closely with senior engineers to implement design changes and enhancements., • Maintain accurate documentation of design changes, test procedures, and project progress., • Prepare reports and presentations for detailed design reviews. Required Skills and Experience • Bachelor of Science (BS) or Master of Science (MS) in Mechanical Engineering, Product Design or related field from an accredited university., • Minimum 3-4 years of full-time experience in the design and correlation of mechanical components including: plastic or metal parts, mechanical assemblies, printed circuit boards or flexes., • Product development and management experience in server chassis mechanical, thermal, and system design, • Experience with server system architecture and server chassis layout optimization, • Experience in developing server product architectures and carrying through to production., • General technical knowledge in multiple manufacturing methods used in consumer products such as 3D printing, urethane casting, injection molding, sheet metal, CNC machining etc., • System integration experience, including electro-opto mechanical components (Optics, lens, Motors, Mirrors, translation stages etc.), heat transfer and product architecture, • Experience with using CAD tools such as Solidworks, NX or Creo, and PDM tools such as Solidworks PDM, Windchill (Solidworks and SolidworksPDM experience is preferred), • Familiar with product development cycles, • Experience working with manufacturing vendors and suppliers, • Ability to work in a startup environment., • Technical knowledge in general materials., • Able to lift weights up to OSHA limit (50 lbs.) when required (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Preferred Skills and Experience • Prior work on server chassis design or data center server hardware is highly valued, as it demonstrates familiarity with the unique challenges of complex system integration of optical, electrical, and mechanical components., • Experience with designing airflow paths, heat sinks, fans, or liquid cooling loops that keep cutting-edge systems within safe temperatures., • Strong understanding of compliance-driven design requirements, including EMI and ESD. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description We are sharing a specialised part-time consulting opportunity for professionals experienced in electronics manufacturing, semiconductor workflows, PCB design, hardware validation, yield analysis, reliability testing, and structured hardware engineering documentation. This role supports current and upcoming remote consulting opportunities focused on structured electronics manufacturing review, hardware engineering workflow analysis, technical documentation, validation reporting, manufacturing systems review, and high-quality project execution. Selected professionals will apply their electronics or hardware expertise to review realistic engineering scenarios, evaluate technical requirements, prepare structured written outputs, and support accurate, evidence-based electronics workflow tasks. Key Responsibilities Professionals in this role may contribute to: Electronics Manufacturing & Hardware Workflow Review • Review electronics manufacturing scenarios involving semiconductor design, PCB workflows, electronic assembly, SMT manufacturing, NPI, sustaining engineering, and production documentation, • Evaluate hardware engineering materials against source documentation, technical requirements, manufacturing constraints, and expected workflow outcomes, • Support structured review of design review decks, schematic or layout materials, BOMs, ECOs, validation reports, and manufacturing documentation, • Review hardware test scenarios involving test reports, reliability studies, HALT/HASS materials, yield analyses, validation records, and failure investigation documentation, • Evaluate test and validation outputs against documented criteria, expected results, engineering requirements, and source materials, • Support structured review of quality, reliability, yield, and validation workflows across electronics or semiconductor environments, • Review structured workflows involving MES systems, simulation tools, version-controlled engineering files, production records, and cross-functional technical documentation, • Support structured task documentation based on realistic electronics workflows involving multiple tools, files, and review steps, • Work with materials related to platforms such as ANSYS Fluent, STAR-CCM+, Siemens Opcenter, Rockwell FactoryTalk, GitHub, GitLab, or similar systems Strong candidates may have: • 3+ years of experience in electronics manufacturing, hardware engineering, semiconductor design, semiconductor fabrication, process integration, yield engineering, PCB design, hardware test, validation, reliability, electronics supply chain, NPI, or sustaining engineering, • Experience in semiconductor, consumer electronics, networking hardware, contract manufacturing, or related electronics-heavy environments, • Background in one or more areas such as digital, analog, or mixed-signal design; IC or SoC workflows; PCB layout; SMT manufacturing; hardware validation; reliability testing; or electronics sourcing, • Familiarity with tools such as ANSYS Fluent, STAR-CCM+, Siemens Opcenter, Rockwell FactoryTalk, GitHub, GitLab, CAD/EDA tools, MES platforms, or similar engineering systems, • Comfort reading and preparing engineering artifacts such as design review decks, schematic files, layout files, test reports, yield analyses, BOMs, ECOs, reliability reports, validation reports, and technical workspaces, • Strong analytical thinking and written communication skills, • Bachelor's or master's degree in electrical engineering, computer engineering, electronics engineering, manufacturing engineering, industrial engineering, materials science, or a related technical field is helpful, • Experience at a large semiconductor, consumer electronics, networking hardware, or contract manufacturing organization, • Familiarity with semiconductor fabrication, process integration, IC/SoC development, PCB assembly, SMT processes, electronic test, reliability engineering, or manufacturing transfer, • Experience preparing or reviewing schematic/layout files, BOMs, ECOs, yield reports, validation plans, test reports, reliability documents, or manufacturing records, • Familiarity with simulation tools, MES systems, version control, manufacturing execution workflows, or technical documentation systems, • Apply electronics manufacturing and hardware engineering expertise to structured remote project work, • Contribute to high-quality hardware workflow review, validation documentation, manufacturing analysis, and technical scenario development, • Work on flexible, project-based assignments aligned with your electronics background, • Use your engineering judgment in a focused, detail-oriented technical environment, • Independent contractor role, • Fully remote with flexible scheduling, • Part-time commitment depending on project availability, • Competitive rates between $60–$85 per hour depending on expertise, • Weekly payments via Stripe or Wise, • Projects may be extended, shortened, or adjusted depending on scope and performance This opportunity is available through 24-MAG LLC. We connect experienced professionals with remote consulting opportunities across technical, evaluation, and project-based workstreams. By submitting this application, you acknowledge that your information may be processed by 24-MAG LLC for recruitment and opportunity matching in accordance with our Privacy Policy: .

Job Description A client of AlphaStaffHCM is seeking an experienced and talented Senior Hardware Engineer to be part of our hardware development efforts. As a Senior Hardware Engineer, you will be responsible for designing, developing, and testing advanced hardware systems. This position offers a unique opportunity to apply your expertise and skills in a challenging and innovative technology environment. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities: • Support the development of several platforms based around classical and quantum photonics as a senior hardware engineer., • Work alongside other hardware engineers to design custom electronics using Altium Designer., • Evaluate critical component performance via board-level and system-level lab testing (ADCs, DACs, FPGAs, TDCs, etc.), • Work with firmware engineers, software engineers, and quantum scientists during various phases of lab testing., • Work with contract manufacturers during manufacturing phases to procure custom electronics, addressing and mitigating any necessary design changes along the way., • Validate the performance of custom electronics with lab testing. Document any issues uncovered during testing., • Maintain documentation expected at milestone events during the entire design cycle (theory of operations, manufacturing documentation, validation testing results, etc.), • Integrate hardware into the complete system by working closely with mechanical, firmware, and FPGA engineers. Required Skills and Experience: • Bachelor of Science (BS) in Electrical Engineering or Computer Engineering (EE or CE) from an accredited university., • BS in EE or CE and 6+ years of experience or MS EE or CE with 4+ years of experience., • Proven experience designing PCBs from schematic capture, layout design, and review., • Experience with at least one ECAD suite (Altium, OrCAD, Allegro, CircuitMaker, or others) Altium is strongly preferred., • Familiarity with PCB design best practices related to Signal Integrity, Power Integrity, and EMI/EMC compliance., • Strong foundation in PCB design related to DFM, DFT, and DFA best practices., • Strong electrical engineering fundamentals in Analog, Power, and Digital Electronics., • Advanced experience with voltage regulators, LDO, and switch mode power supplies (SMPS)., • Experience with analog electronics design (op-amps, TIAs, filters, etc.), • Experience with digital electronics design (Logic Gates, Flip Flops, Microcontrollers, RAM, ROM, Flash, etc.), • Advanced knowledge of simulation tools such as SPICE., • Strong experience with low to medium-speed digital interfaces and protocols (I2C, CAN, UART, SPI, etc.)\, • Hands-on experience with board bring-up, debugging, testing, and integration with lab instruments such as: DMMs, Oscilloscopes, Logic Analyzers, and Spectrum Analyzers., • Able to code C, C++, MATLAB/Octave, or Python., • Working knowledge of Verilog is a huge plus., • Able to lift weights up to 50lbs (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Additional Preferred Skills: • Master of Science (MS) degree in Electrical Engineering or Computer Engineering (EE or ECE)., • Experience designing electronics with complex computing devices such as FPGAs, MCUs, CPUs, DSPs, etc., • Experience working with optoelectronics., • Experience with high-speed serial protocols (USB, PCIe, Ethernet, etc.), • Experience with RF analog, digital, and mixed-signal electronics., • Experience designing systems to meet compliance and certification requirements (e.g., CE/FCC)., • Experience integrating custom ASICs into designs., • FPGA/SoC/MCU lab validation with lab equipment., • Experience writing low-level firmware (C, Verilog, VHDL, etc.), • Experience with manual board prototyping/refurbing using essential equipment like soldering irons and hot air guns. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job DescriptionAbout Us: Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. With Voyant, the next generation of machines can see, understand, and navigate the world like never before. Discover how we’re redefining what’s possible by making real products out of cutting edge research in silicon photonics. Why Join us? At Voyant, you’ll help build some of the world’s most complex silicon photonics chips, reimagined for high-performance 3D sensing. Our chips are at the heart of our LiDAR systems, and your work has a direct impact on our core product and roadmap. As a Senior Silicon Photonics Engineer, you’ll play a key role in defining photonic architecture and developing new passive and active components. In your first year, you’ll own simulations, and design system PICs, working hands-on from concept through implementation. You’ll join a small, fast-growing team that collaborates tightly across photonics, systems, packaging, and electronics. The role offers both deep technical ownership and real growth potential — from leading component design to eventually overseeing full tapeout efforts across disciplines. If you're excited by cutting-edge technology and meaningful challenges, this is a rare opportunity to shape a core system in a company that’s bringing photonics innovation to market. Key Responsibilities: * Design and simulate photonic components and system-level functionality and performance * Design schematics, draw layout, as well as work with layout engineers to create photonic systems and component test structures. * Own and drive complex tapeouts to completion on time * Work closely with external manufacturing partners to inform component design, process integration, and performance monitoring. * Develop component and system-level optical testing plans and collaborate with the test team to develop optoelectronic testing setups, perform hands-on photonic component and optical system-level testing. * Work with the product team to transition/scale testing for performance evaluation. * Collaborate with cross-functional teams to integrate our photonic chips into the LIDAR system and evaluate their performance * Contribute to the expansion of our IP portfolio through patent filing Qualifications: * Ph.D. with research in silicon photonics with 2+ years’ experience * Proven track record leading one or more successful silicon photonics foundry tapeouts * Strong understanding of planar waveguide optics, both passive components such as waveguides, multiplexers/demultiplexers, tapers, couplers and active such as waveguide detectors, lasers and optical amplifiers * Strong understanding of photonic system-level design concerns * Strong understanding of photonic component-level design concerns * Experience in photonic fabrication * Good understanding of CMOS manufacturing process steps and constraints on the design of photonic devices * Proficient with mainstream photonic components and systems simulation packages such as Lumerical, Tidy3D and COMSOL * Proficient with complex optoelectronic lab testing techniques and equipment, necessary to validate designs, including high speed detectors, oscilloscopes, spectrum analyzers, precision positioning setups * Collaborative in a multi disciplinary startup environment, ability to work both with local and remote team members as well as with our manufacturing partners * Independent, analytical thinker, comfortable in a fast-paced dynamic frontier technology environment Benefits Package: * Competitive base salary and meaningful equity package. * Comprehensive health benefits (Medical, Dental, Vision). * Unlimited PTO and paid company holidays. * Team events and company meetups. * Complimentary lunch provided daily at our NYC office. Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description Position: Field Sales Engineer Location: Secaucus, NJ Amphenol High Speed and Commercial Products Groups are the market leaders for high speed, high bandwidth electrical connectors for the Telecom/Datacom and Diverse market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. Our global headquarters are located in Nashua, NH and we have design, sales, and manufacturing locations globally. We are currently seeking Field Sales Engineers to join our Enterprise and Data CenterSales teams in Secaucus, NJ. RESPONSIBILITIES: Our customer's ultimate success depends on our ability to solve cutting edge problems in relation to high bandwidth signal transmission. We value our relationships with these companies, and we depend on our Sales and Field Applications Engineering Teams to foster this ongoing partnership. As a Sales Engineer you interface with our external customers and internal product development, product marketing, and application teams.Sell and promote all Amphenol products within an assigned territory and defined accounts, either through WSP/OEMcustomersand/or distributors, via successful design win (AVL) activities and total channel management. Help devise strategies to differentiate our products and solutions from our competitors. Broaden customer base and increase penetration at existing accounts, including key global accounts. The role of Sales Engineer gives an excellent insight into the Sales, Marketing, Technical, and Product Development functions of the organization. • Provide sales leadership, and work closely with Field Applications Engineer and Business Units, • Promote and sell Amphenol products with established customers and developing new prospects., • Identify all interconnect opportunities/applications of Amphenol products for clients and work with the customers engineering team to design in new products, • Develop and implement sales plan and growth strategy for territory and customers, • Meet and exceed strategic objectives and established sales quota via new design wins and management of the entire sales channel, • Motivate existing and potential customers to increase product content on the design, • Support technical aspects of the sales cycle including marketing support for the development and implementation of Amphenol products, • Provide customer service to solve complex interconnect problems and technical inquiries, • Track orders and revenue by customer, • Build rapport and provide customer support by supplying information related to samples, delivery dates, part drawings and specifications, quality issues, credit issues, etc., • Develop a thorough understanding of the market and competition in your territory., • Keep informed of new products and other general information of interest to customers., • Bachelor's in Electrical or Mechanical Engineering with Business/Marketing aptitude or a Bachelor's in Business with work experience in a technical sales field, • Knowledge and understanding of interconnect solutions industry, • 5+ years of fieldsales and applications experience, or related experience (inside sales or customer service with interconnect, passive, electromechanical components), • Sales skills to successfully negotiate a technical design win, approved vendor status, contracts, and customer partnership., • Technically astute with an ability to acquire extensive product and application knowledge, with an ability to assess, and provide solutions for, customer design challenges/needs, • Self-motivated and driven to identify, qualify and pursue new customers and new markets, • Ability to effectively communicate across the engineering and managerial functions of a business, • Strong oral and written communications to provide high level customer service and build relationships, • Organizational skills to anticipate, prioritize, plan, organize to meet and exceed strategic objectives, • Leadership skills to assess and drive new opportunities in a global account environment, • Knowledge of modeling tools Pro E or Solidworks Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at

Job Description Senior Structural Engineer We are seeking a Senior Structural Engineer with strong experience in temporary structures, including scaffolding systems, shoring, bracing, and construction support design. This role involves working closely with contractors, project managers, and field teams to develop safe, efficient, and code-compliant solutions for complex construction projects. Responsibilities • Design and analysis of temporary structures including scaffolding, shoring, formwork, and excavation support systems, • Perform structural calculations and prepare detailed drawings and specifications, • Review contractor submittals and provide engineering support during construction, • Conduct site visits to assess conditions and ensure compliance with design intent, • Collaborate with multidisciplinary teams to support project delivery, • Bachelor’s degree in Civil or Structural Engineering, • Professional Engineer (PE) license required, • 8+ years of structural engineering experience with a focus on temporary structures or construction engineering, • Strong knowledge of OSHA regulations and relevant building codes, • Proficiency with structural analysis and design software To apply, submit resume to Joseph P. Durkin Liberty Personnel Services, Inc. 1001 Conshohocken State Rd, Ste 2-410 West Conshohocken, PA 19428 Direct Line: #midsenior #CivilMEP #li-hybrid Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Supermicro is a Top Tier provider of advanced server, storage, and networking solutions for Data Center, Cloud Computing, Enterprise IT, Hadoop/ Big Data, Hyperscale, HPC and IoT/Embedded customers worldwide. We are the #5 fastest growing company among the Silicon Valley Top 50 technology firms. Our unprecedented global expansion has provided us with the opportunity to offer a large number of new positions to the technology community. We seek talented, passionate, and committed engineers, technologists, and business leaders to join us. Job Summary: Supermicro is seeking a highly skilled Service Engineer to support our Global Service network and contribute to building a world-class field engineering organization. This role requires flexibility to work in a data center and call center environment, providing technical support via phone and web to customers experiencing hardware and software issues. This position will be based in our office located in Jersey City, NJ. Includes the following essential duties and responsibilities (other duties may also be assigned): Why This Role Matters This position plays a critical role in ensuring customer satisfaction by providing timely and effective technical support. As a key part of our Global Service network, you will troubleshoot issues, deploy hardware solutions, and contribute to a seamless customer experience. Your expertise will directly impact the efficiency and reliability of Supermicro's service operations. What You'll Do • Provide frontline technical support to end-users via phone, email, and ticketing system., • Diagnose and troubleshoot hardware, software, and network-related issues., • Escalate complex problems to higher-level support teams when necessary., • Perform physical installation, rack and stack, cabling, and networking of data center hardware., • Assist in the deployment of server, storage, and networking equipment., • Monitor and maintain data center infrastructure to ensure optimal performance and uptime., • Perform regular maintenance and upgrades on data center hardware and software., • Collaborate with data center staff to address and resolve technical issues., • Conduct quality checks and test system functionality post-installation., • Work with internal teams to gather client requirements and provide technical expertise during the post-sales process., • Coordinate with the engineering team to ensure seamless integration of hardware solutions., • Ensure compliance with data center policies and procedures., • Document and report data center activities and incidents., • Travel up to 50% of the time to customer sites and data centers., • Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering; or an Associate's degree in Electrical/Electronics Engineering with equivalent relevant experience., • 1+ year of experience in servicing complex X86 systems and parts., • 1+ years of experience in a customer support role., • Strong hardware system diagnostics skills and understanding of BIOS, drivers, and application-related issues., • Ability to troubleshoot, problem-solve, and make decisions in a fast-paced environment., • Experience with statistical Excel functions or database management., • Ability to manage multiple cross-functional projects concurrently in a rapidly changing environment., • Hands-on experience with enterprise-grade server hardware., • Strong verbal and written communication skills with an emphasis on technical communication., • Punctual, detail-oriented, and proactive in driving solutions., • Experience working in large enterprise environments or certifications in Windows and Linux., • Must have a valid driver's license and a reliable automobile., • Ability to lift/carry at least 50 lbs, • Capable of standing for extended periods to troubleshoot and repair equipment in a noisy environment (approximately 20% of the time) Please note that this position requires regular in-office attendance. The successful candidate is expected to be present in the office during standard working hours as determined by the company. In-office collaboration and participation in team meetings, training sessions, and other on-site activities are essential aspects of this role. Candidates should consider the commuting distance and be prepared to fulfill their responsibilities in the designated office location. $70,304 - $90,000 The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation, such as participation in bonus and equity award programs. Supermicro is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of Supermicro to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

Job Description Position Summary The Field Service Technician position is a valuable front-line position in our organization, and is responsible for ongoing service delivery, urgent service response calls, and installing new security/alarm systems for our clients in New York City and the surrounding area. Your Opportunity This is an excellent opportunity to join a stable, well-established company with an impeccable reputation in the security industry. This Position Requires: · Experience supporting electronic security systems. · Experience developing and maintaining system applications and network configurations. · Alarm, access control and CCTV installation and service experience including experience working with various alarm panels, including DMP and Radionics, Software House · An electronics technician degree, military technical school or equivalent experience. · Solid work record (at least one year is preferable). · A passion for delivering excellent customer service. · An ability to work and communicate confidently at all organization levels. · An ability to work independently and recognize when to access available assistance and expertise. · Valid NY driver’s license and clean driving record. Responsibilities: · Install and service alarm systems · Network wiring at customer site · Preventative maintenance inspections · Implement hardware and software upgrades · Respond to customer problems and offer solutions. · Resolve any software or hardware problems at customer site. · Instruct engineer users on hardware capabilities. Company DescriptionSpecializes in designing and implementing tailored security systems for museums, financial institutions and commercial clients. .Specializes in designing and implementing tailored security systems for museums, financial institutions and commercial clients.\r\n\r\n.

Job Locations US-NJ | US-PA | US-DE | US-NY ID 2026-19201 Job Function Service & Support As one of the world's leading analytical instrumentation companies, Bruker covers a broad spectrum of advanced solutions in all fields of research and development. All our systems and instruments are designed to improve safety of products, accelerate time-to-market and support industries in successfully enhancing quality of life. We've been driving innovation in analytical instrumentation for 60 years now. Today, worldwide more than 10,000 employees are working on this permanent challenge, at over 90 locations on all continents. Please note this position that does require frequent travel within the region. We do require our Field Engineers to reside within the region. The specified region will be the states of VA, WV, MD, DE, NJ, PA, NY, CT, VT,MA, ME, and NH. New opportunity for a Field Service Engineer to install and support high technology equipment in research, pharmaceutical, university and government labs for Bruker BioSpin, a leading manufacturer of nuclear magnetic resonance (NMR), magnetic resonance imaging (MRI) and compact magnetic resonance (CMR) spectroscopy instruments and accessories. The Field Service Engineer works with highly complex equipment that requires advanced understanding of these instruments to perform installation, maintenance, troubleshooting, and repair service activities. Install new or modified systems or accessories at customer facilities and ensure full functionality according to specifications. • Provide on-site technical assistance to install, service, and repair equipment., • Familiarize and train customers for basic operation of the equipment., • Secure customer acceptance of installation and repair sign-off., • Re-qualify the entire instrument after service repair by running complex compounds for verification., • Serve as a supportive and effective communication link between the customer and company to ensure customer service satisfaction., • Actively attend and participate in life science technology and product training., • B.S. in Physics, Electrical Engineering, Electronics, Biotech, Biology or Chemistry discipline., • Minimum 3 years' work experience diagnosing and repairing complex mechanical, electromechanical and/or electronic equipment., • Knowledge of NMR and MRI, analog electronics, high voltage circuitry/circuits, cryogenics, and ultra-high vacuum technology is highly desirable., • Strong technical skills involving analytical instrumentation., • Excellent customer focus with ability to reliably respond to inquiries, communicate and interact with Scientists that possess a Ph.D. (or Master's Degree) in Biochemistry, Biophysics or Microbiology., • English fluency with strong oral, reading, written, MS Office, computer, technical data, and networking communication and presentation skills, with ability to communicate complex technical issues in an easy to understand manner., • Excellent organizational skills with ability to work independently, prioritize, multi-task, follow through, and meet deadlines within an entrepreneurial and customer-focused work environment., • Ability to satisfactorily complete position compliance and training requirements, • Attend and actively participate in quarterly scientific technical training programs, • Ability to lift up to 50 lbs., transport equipment and tools in excess of 300 lbs., • This position requires lifting heavy objects and maneuvering large bulky items (examples: tools, mechanical pumps, rigging equipment, power supplies, field mapper)., • This position requires reasonable dexterity to perform manual functions in confined spaces., • Proven ability to follow safety standards, practices, and codes., • Valid Driver License in good standing, issued by resident state, with reliable transportation., • U.S. Citizenship or U.S. Permanent Resident status required., • Maintain a valid passport with flexibility for domestic and international travel., • May be required to pass security clearance investigation. At Bruker, the base salary is part of our total compensation. The estimated base salary range for this full-time position is between $60,750 and $108,000 and provides an opportunity to progress as you grow and develop within a role. The base salary for the role will depend on several job-related factors, including, but not limited to, education, training, experience, the geographic location of the successful candidate, skills, competencies, job-related knowledge, and travel requirements for this position. Full-time employees may also be eligible for a performance-related incentive in addition to a full range of benefits, including 401(k) with company match, an employee stock purchase plan, medical and dental plans, life insurance, short-term and long-term disability insurance, employee assistance program and paid time off including vacation, sick time and holidays, and more. Bruker is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics. Certain positions at Bruker require compliance with export control laws and as a result, all interviewed candidates for all positions will be screened pre-interview to determine their eligibility in light of export control restrictions.

Placed by VanSpeag Group LLC | Client: Confidential – High-Tech Engineering with base offices in New York City.Role: Electrical Engineer – DC/DC High Frequency Power Electronics & Wireless Power Transfer.Discipline: Power Electronics / Mixed-Signal Hardware Design / Wireless Power Transfe

The Power Electronics Engineer will design, analyze, and improve our wireless charging amplifier, DC-DC converter, and AC-DC converter systems for key product verticals that are advancing into production. The primary responsibilities of the Power Electronics Engineer are as follows:. This role is ha

Placed by VanSpeag Group LLC | Client: Confidential – High-Tech Engineering with base offices in New York City.Role: Electrical Engineer – DC/DC High Frequency Power Electronics & Wireless Power Transfer.Discipline: Power Electronics / Mixed-Signal Hardware Design / Wireless Power Transfer (W

Job Description Company Overview At Veo, our mission is to end car dependency by making clean transportation accessible to all. A leading shared micromobility provider in North America, Veo provides millions of bike and scooter rides annually in over 60 cities and universities from Los Angeles to New York City. Veo offers the most diverse and accessible vehicle fleet in the country built to expand who can ride and what trips are possible. We design and manufacture our vehicles, hardware, and software systems in-house and operate our local markets directly to ensure safe and reliable service. As the first profitable micromobility company in North America, Veo is built for long-term growth and partnership with cities. Veo has been recognized as one of Fast Company's Most Innovative Companies and a Top GreenTech Company by TIME. As we continue to scale, we are looking for exceptionally talented individuals who are excited to help shape the next era of micromobility. Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • Perform field tasks as needed such as: swapping batteries and redistribution, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hours #VEO2026 Below is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $19—$20 USD

Job Description Company Overview At Veo, our mission is to end car dependency by making clean transportation accessible to all. A leading shared micromobility provider in North America, Veo provides millions of bike and scooter rides annually in over 60 cities and universities from Los Angeles to New York City. Veo offers the most diverse and accessible vehicle fleet in the country built to expand who can ride and what trips are possible. We design and manufacture our vehicles, hardware, and software systems in-house and operate our local markets directly to ensure safe and reliable service. As the first profitable micromobility company in North America, Veo is built for long-term growth and partnership with cities. Veo has been recognized as one of Fast Company's Most Innovative Companies and a Top GreenTech Company by TIME. As we continue to scale, we are looking for exceptionally talented individuals who are excited to help shape the next era of micromobility. Shift: Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • Perform field tasks as needed such as: swapping batteries and redistribution, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hoursBelow is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $20.50—$21 USD

Job Description Company Overview At Veo, our mission is to end car dependency by making clean transportation accessible to all. A leading shared micromobility provider in North America, Veo provides millions of bike and scooter rides annually in over 60 cities and universities from Los Angeles to New York City. Veo offers the most diverse and accessible vehicle fleet in the country built to expand who can ride and what trips are possible. We design and manufacture our vehicles, hardware, and software systems in-house and operate our local markets directly to ensure safe and reliable service. As the first profitable micromobility company in North America, Veo is built for long-term growth and partnership with cities. Veo has been recognized as one of Fast Company's Most Innovative Companies and a Top GreenTech Company by TIME. As we continue to scale, we are looking for exceptionally talented individuals who are excited to help shape the next era of micromobility. Part Time candidates are welcome to apply! Shift: 12pm - 8pm Friday, Saturday, Sunday Pay: $19/hr All candidates must live near or have reliable transportation to the warehouse located on S 4th Ave, Mt. Vernon, NY. Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • Perform field tasks as needed such as: swapping batteries and redistribution, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hoursBelow is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $18.50—$19 USD

A leading energy technology firm in New Jersey seeks a Field Service Engineer to ensure the installation and commissioning of innovative energy storage systems.The ideal candidate will have strong communication skills, a degree in electronics or electrical fields, and three years of experience in en

Mercor is seeking a Manufacturing - Electronics Expert to build digital workspaces that enhance the efficiency of AI research. This role involves collaboration with industry experts and requires a BS/MS in Electrical Engineering and 3+ years of experience in a Fortune 500 firm.

Key Responsibilities Professionals in this role may contribute to: Electronics Manufacturing & Hardware Workflow Review Review electronics manufacturing scenarios involving semiconductor design, PCB workflows, electronic assembly, SMT manufacturing, NPI, sustaining engineering, and production docume

Key Responsibilities Professionals in this role may contribute to: Electronics Manufacturing & Hardware Workflow Review Review electronics manufacturing scenarios involving semiconductor design, PCB workflows, electronic assembly, SMT manufacturing, NPI, sustaining engineering, and production docume

Walmart is expanding its massive workforce, and American Career Guide is here to help you explore available roles at the retail giant.Positions are open across multiple departments, offering career paths for both entry-level talent and experienced professionals.Join the Walmart team and help provide

Military training in electronics or electrical systems.

Associates of Applied Science from accredited college in Electronics Engineering or Computer Science with emphasis on Programming or equivalent experience and certifications. Providing technical and engineering support for automated industrial machinery and industrial electronic controls.

Hardware Engineer or Embedded Systems Engineer. You'll draw on your hands-on experience with schematic capture, PCB layout, or embedded hardware design to evaluate AI-generated content and provide feedback that helps AI better understand electronics design tasks and EDA workflows. PCB Designer or El

DMV IT Service LLC is a trusted IT consulting firm, established in 2020.We specialize in optimizing IT infrastructure, providing expert guidance, and supporting workforce needs with top-tier staffing services.Our expertise spans system administration, cybersecurity, networking, and IT operations.We

Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, Biomedical Engineering, or related field. As the Lead Electrical Test Engineer, you will be responsible for planning, coordinating, and executing system-level electronics testing that demonstrates Echo’s BCI devices

Customer Service Representative.Remote (Must reside in NY, NJ, PA, CT, or MA).Field-Based | Full-Time | Global OEM | Travel Required.Temsa is a global leader in the design and manufacturing of motorcoaches and buses, with a fast-growing presence across North America.As an OEM committed to delivering

Electronics or electrical training from military service – Preferred.

Military training in electronics or electrical systems.

Education and Experience: * Associate's or Bachelor's Degree in Electronics, Computer Engineering, or related field.