208 Best flexible shift Jobs in Edison, New Jersey (April 2026)

Tool Maintenance Technician

8 days ago

Somerset

Job Description DEPARTMENT: Tool Room REPORTS TO: Molding Department POSITION DESCRIPTION: The Tool Room Technician produces effective mold and die repairs through the following: fitting components into molds; finishing new products, components, or inserts; assembling pieces when complete; as well as documenting mold repair procedures in IQMS. RESPONSIBILITIES: • Support the Tool Room Supervisor in the process of setup, testing, procedures, training, and updating of IQMS relative to tooling and operations., • Perform accurate, safe and correct setups prior to commencement of operation., • At point of startup, assure no flash, water leaks and other potential issues. Address any known previous problems or issues. Properly test for water leaks and test electrical for any issues., • Comply with the established standardization of mold setup and teardown procedures. Apply learned best practices., • Select, align and secure fixtures, cutting tools, attachments accessories and materials on machines, • Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls as required., • Verifies conformance of finished work piece to specs., • Fits and assembles parts into complete assembly., • Verifies dimensions and alignment of assembly., • Perform work within the Tooling Preventive Maintenance program including but not limited to in-mold closings, hoses and water fittings. Utilize IQMS/Kanban to maintain processing related to equipment., • Change non-production molds in advance as needed., • Follow proper procedures including lock-out / tag-out, mold maintenance sheets and others., • Maintain consistent and effective component cleaning and storage., • Maintain liner dies needed for production., • Support OEE/SEE metrics and related goals of cycle attainment, zero-block cavitation, mold set-up compliance, and changeovers to maximize mold efficiency., • Follow the escalation process for tool issues by consistently and openly sharing information with the Tool Room Manager., • Document, standardize and create procedures for repeatability, predictability and improved efficiency specific to related activities., • Perform data entry on shop floor as needed., • Collaborate with Engineering to enable effective vendor sourcing., • Participate in internal machining projects., • Actively participate in tool teardown meetings., • Participate in shift hand-off activity to ensure a smooth shift transition., • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures, • Reports any product or process failures that could impact food safety of manufactured products to the location’s Food Safety Team Leader and submits an appropriate incident report PHYSICAL REQUIRMENTS: While performing the duties, the employee will be required to sit and/or stand, talk or hear, both in person and by telephone; use hands, fingers and arms to feel objects or controls, reach with hands and arms. Prolonged standing/walking periods of 12 hours. May be required to stoop, kneel, bend, crouch and lift to 50 pounds. RESPONSIBILITIES: • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures MRP Solutions (MRP), a plastic cap manufacturer, is a leading provider of high-quality, injection molded plastic closures, jars and packaging components used every day by millions of consumers around the globe. But we offer more than just plastic caps and lids – we deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. MRP Solutions combines extensive packaging expertise with a consultative approach to reliably uncover customer needs. By understanding your business goals, we can tailor smarter, safer, and more flexible packaging solutions that reduce cost and increase speed to market, helping your businesses capitalize on opportunity. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. We are passionate about partnering with distributors and manufacturers who understand that plastic caps and lids are a small but important part of how people experience their brands. Together, we deliver packaging with purpose. Our Vision: We deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. Our Values & Beliefs • Integrity – We have the courage to act with the highest level of integrity, even when no one is watching. We do what is right 100% of the time., • Value Creation – The sole reason a company exists is to create real long-term value for society. This starts with ensuring human safety, as value cannot be created without first protecting human life. We seek opportunities for mutual benefit with all of our stakeholders, including customers, employees, shareholders, suppliers, and the communities in which we operate. In everything we do, our overarching goal is to deliver superior results.., • Accountability - We are accountable to each other and to our stakeholders. We say what we do and do what we say. We embrace a culture of ownership, empowering and equipping employees with the ability to own their outcomes., • Entrepreneurial - Everyone thinks and acts like owners, employing good economic and critical thinking skills while adopting the risk profile of our shareholders. We are inquisitive, constantly seeking out opportunities to improve, actively searching for and innovating across each and every aspect of our business. We relentlessly strive to understand and profitably anticipate what our customers need and value, because if our customers do not grow, we do not grow., • Respectful and Friendly – Everyone deserves to be treated with respect and dignity. Because everyone's perspective has value, we embrace diversity of thought, background and experiences. We are friendly and lead with a smile. What we do is important, but how we do it is what makes it impactful., • Change - We actively seek out and embrace change wherever profitable. Because society is constantly identifying and employing new and better ways of accomplishing tasks, we must constantly innovate, reinvent and, ultimately, destroy the old ways of doing business. We actively engage in rigorous debate and embrace challenge to ensure we stay relevant and deliver superior results., • Fulfillment – Our employees are the foundation of our success. We foster an environment enabling our employees to learn, grow and accept more accountability as they demonstrate capability. We promote more than just individual connection as community at work brings people together through common interest, objectives or experiences. MRP Solutions is an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, medical condition, marital or protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. Consistent with the obligations of state and federal law, MRP Solutions will make reasonable accommodation for qualified individuals with disabilities. Any employee who needs reasonable accommodation should contact Human Resources.

Mechanic, Maintenance Packaging

11 days ago

North Brunswick

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Maintenance (PKG.) Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Packaging Mechanic is responsible for operating, maintaining, troubleshooting, and repairing packaging lines and auxiliary equipment (e.g. fillers, cappers, labelers, cartoners, sealers, conveyors, etc.). On higher levels, the role involves preventive maintenance, changeovers, and acting as a technical leader on the packaging floor. Areas of Responsibility Level 1 – Mechanic, Maintenance (PKG.) Mechanic supports routine maintenance, equipment cleaning, basic setup, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to packaging maintenance, this role focuses on learning and executing tasks safely and accurately. Operates under close supervision, handling routine maintenance tasks such as cleaning, basic setups, and minor repairs. Escalates complex issues to higher-level technicians. Key Responsibilities: • Assist with setup, changeovers, cleaning, and basic operation of packaging lines., • Load materials (labels, cartons, films) into packaging equipment., • Perform basic visual inspections, detect packaging defects, and remove faulty units., • Assist in daily cleaning, line sanitation, and housekeeping., • Follow standard operating procedures (SOPs), batch records, and safety protocols., • Document basic packaging metrics, logs, and shift records., • Escalate technical issues to higher‑level technicians., • Assist in minor mechanical adjustments (e.g. tightening bolts, replacing belts) under supervision., • Participate in safety and quality training. Level 2 – Mechanic, Maintenance (PKG.) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, perform machine change overs and setup and perform limited repairs . Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Independently perform maintenance, troubleshooting, and repair on packaging lines including blister, bottle, cartoning, and label printing systems., • Diagnose mechanical, electrical, pneumatic, and control system issues (motors, drives, sensors, solenoids, PLC I/O) on packaging equipment., • Execute changeovers and line reconfigurations, calibrations, and adjustments for product format changes., • Perform preventive maintenance and predictive maintenance tasks, identifying worn parts and scheduling replacements., • Read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Mentor Level 1 technicians, guiding and reviewing their work., • Assist in packaging reliability improvement initiatives, root cause analyses, and process optimization., • Support emergency breakdowns and unscheduled repairs to minimize downtime. Mechanics are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Operates independently with full responsibility over packaging line performance. Handles advanced diagnostics, major repairs, preventive maintenance programs. Makes judgment calls on repair vs replace. Leads projects, supports regulatory compliance, and provides technical leadership. Works with the engineerign team in identfying and proposing process improvements and in maintaining adequate critical spare parts as well as consumables. Key Responsibilities: • Lead maintenance, upgrade, and optimization of complex packaging lines (blister, bottle, cartooning, label printing, IFC lines)., • Perform advanced diagnostics, root cause analysis, and system redesigns to improve reliability and throughput., • Take full responsibility for major line failures and coordinate cross‑functional resources to resolve issues., • Plan and execute capital projects, line changeovers, expansions, and line integrations., • Act as technical liaison with vendors, OEMs, contractors, and internal engineering groups., • Develop and manage preventive and predictive maintenance programs., • Mentor, train, and coach Level 1 and Level 2 technicians., • Participate in regulatory inspections and ensure compliance documentation., • Recommend equipment upgrades, modifications, or replacements., • Lead packaging continuous improvement initiatives (OEE improvements, downtime reduction). Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (PKG.) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st Shift: 7:30am-4pm. Shift hours may vary based on business needs.

Flexible shift jobs in Edison, New JerseyCreate job alerts

Popular jobs searches in Edison, New Jersey

Popular flexible shift jobs locations